| """DetailsViewer class. |
| |
| This class implements a pure input window which allows you to meticulously |
| edit the current color. You have both mouse control of the color (via the |
| buttons along the bottom row), and there are keyboard bindings for each of the |
| increment/decrement buttons. |
| |
| The top three check buttons allow you to specify which of the three color |
| variations are tied together when incrementing and decrementing. Red, green, |
| and blue are self evident. By tying together red and green, you can modify |
| the yellow level of the color. By tying together red and blue, you can modify |
| the magenta level of the color. By tying together green and blue, you can |
| modify the cyan level, and by tying all three together, you can modify the |
| grey level. |
| |
| The behavior at the boundaries (0 and 255) are defined by the `At boundary' |
| option menu: |
| |
| Stop |
| When the increment or decrement would send any of the tied variations |
| out of bounds, the entire delta is discarded. |
| |
| Wrap Around |
| When the increment or decrement would send any of the tied variations |
| out of bounds, the out of bounds variation is wrapped around to the |
| other side. Thus if red were at 238 and 25 were added to it, red |
| would have the value 7. |
| |
| Preserve Distance |
| When the increment or decrement would send any of the tied variations |
| out of bounds, all tied variations are wrapped as one, so as to |
| preserve the distance between them. Thus if green and blue were tied, |
| and green was at 238 while blue was at 223, and an increment of 25 |
| were applied, green would be at 15 and blue would be at 0. |
| |
| Squash |
| When the increment or decrement would send any of the tied variations |
| out of bounds, the out of bounds variation is set to the ceiling of |
| 255 or floor of 0, as appropriate. In this way, all tied variations |
| are squashed to one edge or the other. |
| |
| The following key bindings can be used as accelerators. Note that Pynche can |
| fall behind if you hold the key down as a key repeat: |
| |
| Left arrow == -1 |
| Right arrow == +1 |
| |
| Control + Left == -10 |
| Control + Right == 10 |
| |
| Shift + Left == -25 |
| Shift + Right == +25 |
| """ |
| |
| from Tkinter import * |
| |
| STOP = 'Stop' |
| WRAP = 'Wrap Around' |
| RATIO = 'Preserve Distance' |
| GRAV = 'Squash' |
| |
| ADDTOVIEW = 'Details Window...' |
| |
| |
| class DetailsViewer: |
| def __init__(self, switchboard, master=None): |
| self.__sb = switchboard |
| optiondb = switchboard.optiondb() |
| self.__red, self.__green, self.__blue = switchboard.current_rgb() |
| # GUI |
| root = self.__root = Toplevel(master, class_='Pynche') |
| root.protocol('WM_DELETE_WINDOW', self.withdraw) |
| root.title('Pynche Details Window') |
| root.iconname('Pynche Details Window') |
| root.bind('<Alt-q>', self.__quit) |
| root.bind('<Alt-Q>', self.__quit) |
| root.bind('<Alt-w>', self.withdraw) |
| root.bind('<Alt-W>', self.withdraw) |
| # accelerators |
| root.bind('<KeyPress-Left>', self.__minus1) |
| root.bind('<KeyPress-Right>', self.__plus1) |
| root.bind('<Control-KeyPress-Left>', self.__minus10) |
| root.bind('<Control-KeyPress-Right>', self.__plus10) |
| root.bind('<Shift-KeyPress-Left>', self.__minus25) |
| root.bind('<Shift-KeyPress-Right>', self.__plus25) |
| # |
| # color ties |
| frame = self.__frame = Frame(root) |
| frame.pack(expand=YES, fill=X) |
| self.__l1 = Label(frame, text='Move Sliders:') |
| self.__l1.grid(row=1, column=0, sticky=E) |
| self.__rvar = IntVar() |
| self.__rvar.set(optiondb.get('RSLIDER', 4)) |
| self.__radio1 = Checkbutton(frame, text='Red', |
| variable=self.__rvar, |
| command=self.__effect, |
| onvalue=4, offvalue=0) |
| self.__radio1.grid(row=1, column=1, sticky=W) |
| self.__gvar = IntVar() |
| self.__gvar.set(optiondb.get('GSLIDER', 2)) |
| self.__radio2 = Checkbutton(frame, text='Green', |
| variable=self.__gvar, |
| command=self.__effect, |
| onvalue=2, offvalue=0) |
| self.__radio2.grid(row=2, column=1, sticky=W) |
| self.__bvar = IntVar() |
| self.__bvar.set(optiondb.get('BSLIDER', 1)) |
| self.__radio3 = Checkbutton(frame, text='Blue', |
| variable=self.__bvar, |
| command=self.__effect, |
| onvalue=1, offvalue=0) |
| self.__radio3.grid(row=3, column=1, sticky=W) |
| self.__l2 = Label(frame) |
| self.__l2.grid(row=4, column=1, sticky=W) |
| self.__effect() |
| # |
| # Boundary behavior |
| self.__l3 = Label(frame, text='At boundary:') |
| self.__l3.grid(row=5, column=0, sticky=E) |
| self.__boundvar = StringVar() |
| self.__boundvar.set(optiondb.get('ATBOUND', STOP)) |
| self.__omenu = OptionMenu(frame, self.__boundvar, |
| STOP, WRAP, RATIO, GRAV) |
| self.__omenu.grid(row=5, column=1, sticky=W) |
| self.__omenu.configure(width=17) |
| # |
| # Buttons |
| frame = self.__btnframe = Frame(frame) |
| frame.grid(row=0, column=0, columnspan=2, sticky='EW') |
| self.__down25 = Button(frame, text='-25', |
| command=self.__minus25) |
| self.__down10 = Button(frame, text='-10', |
| command=self.__minus10) |
| self.__down1 = Button(frame, text='-1', |
| command=self.__minus1) |
| self.__up1 = Button(frame, text='+1', |
| command=self.__plus1) |
| self.__up10 = Button(frame, text='+10', |
| command=self.__plus10) |
| self.__up25 = Button(frame, text='+25', |
| command=self.__plus25) |
| self.__down25.pack(expand=YES, fill=X, side=LEFT) |
| self.__down10.pack(expand=YES, fill=X, side=LEFT) |
| self.__down1.pack(expand=YES, fill=X, side=LEFT) |
| self.__up1.pack(expand=YES, fill=X, side=LEFT) |
| self.__up10.pack(expand=YES, fill=X, side=LEFT) |
| self.__up25.pack(expand=YES, fill=X, side=LEFT) |
| |
| def __effect(self, event=None): |
| tie = self.__rvar.get() + self.__gvar.get() + self.__bvar.get() |
| if tie in (0, 1, 2, 4): |
| text = '' |
| else: |
| text = '(= %s Level)' % {3: 'Cyan', |
| 5: 'Magenta', |
| 6: 'Yellow', |
| 7: 'Grey'}[tie] |
| self.__l2.configure(text=text) |
| |
| def __quit(self, event=None): |
| self.__root.quit() |
| |
| def withdraw(self, event=None): |
| self.__root.withdraw() |
| |
| def deiconify(self, event=None): |
| self.__root.deiconify() |
| |
| def __minus25(self, event=None): |
| self.__delta(-25) |
| |
| def __minus10(self, event=None): |
| self.__delta(-10) |
| |
| def __minus1(self, event=None): |
| self.__delta(-1) |
| |
| def __plus1(self, event=None): |
| self.__delta(1) |
| |
| def __plus10(self, event=None): |
| self.__delta(10) |
| |
| def __plus25(self, event=None): |
| self.__delta(25) |
| |
| def __delta(self, delta): |
| tie = [] |
| if self.__rvar.get(): |
| red = self.__red + delta |
| tie.append(red) |
| else: |
| red = self.__red |
| if self.__gvar.get(): |
| green = self.__green + delta |
| tie.append(green) |
| else: |
| green = self.__green |
| if self.__bvar.get(): |
| blue = self.__blue + delta |
| tie.append(blue) |
| else: |
| blue = self.__blue |
| # now apply at boundary behavior |
| atbound = self.__boundvar.get() |
| if atbound == STOP: |
| if red < 0 or green < 0 or blue < 0 or \ |
| red > 255 or green > 255 or blue > 255: |
| # then |
| red, green, blue = self.__red, self.__green, self.__blue |
| elif atbound == WRAP or (atbound == RATIO and len(tie) < 2): |
| if red < 0: |
| red += 256 |
| if green < 0: |
| green += 256 |
| if blue < 0: |
| blue += 256 |
| if red > 255: |
| red -= 256 |
| if green > 255: |
| green -= 256 |
| if blue > 255: |
| blue -= 256 |
| elif atbound == RATIO: |
| # for when 2 or 3 colors are tied together |
| dir = 0 |
| for c in tie: |
| if c < 0: |
| dir = -1 |
| elif c > 255: |
| dir = 1 |
| if dir == -1: |
| delta = max(tie) |
| if self.__rvar.get(): |
| red = red + 255 - delta |
| if self.__gvar.get(): |
| green = green + 255 - delta |
| if self.__bvar.get(): |
| blue = blue + 255 - delta |
| elif dir == 1: |
| delta = min(tie) |
| if self.__rvar.get(): |
| red = red - delta |
| if self.__gvar.get(): |
| green = green - delta |
| if self.__bvar.get(): |
| blue = blue - delta |
| elif atbound == GRAV: |
| if red < 0: |
| red = 0 |
| if green < 0: |
| green = 0 |
| if blue < 0: |
| blue = 0 |
| if red > 255: |
| red = 255 |
| if green > 255: |
| green = 255 |
| if blue > 255: |
| blue = 255 |
| self.__sb.update_views(red, green, blue) |
| self.__root.update_idletasks() |
| |
| def update_yourself(self, red, green, blue): |
| self.__red = red |
| self.__green = green |
| self.__blue = blue |
| |
| def save_options(self, optiondb): |
| optiondb['RSLIDER'] = self.__rvar.get() |
| optiondb['GSLIDER'] = self.__gvar.get() |
| optiondb['BSLIDER'] = self.__bvar.get() |
| optiondb['ATBOUND'] = self.__boundvar.get() |
