| /* |
| * Copyright (c) 2012, 2015, Oracle and/or its affiliates. All rights reserved. |
| * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
| * |
| * This code is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 only, as |
| * published by the Free Software Foundation. Oracle designates this |
| * particular file as subject to the "Classpath" exception as provided |
| * by Oracle in the LICENSE file that accompanied this code. |
| * |
| * This code is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * version 2 for more details (a copy is included in the LICENSE file that |
| * accompanied this code). |
| * |
| * You should have received a copy of the GNU General Public License version |
| * 2 along with this work; if not, write to the Free Software Foundation, |
| * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. |
| * |
| * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA |
| * or visit www.oracle.com if you need additional information or have any |
| * questions. |
| */ |
| |
| /* |
| * This file is available under and governed by the GNU General Public |
| * License version 2 only, as published by the Free Software Foundation. |
| * However, the following notice accompanied the original version of this |
| * file: |
| * |
| * Copyright (c) 2007-2012, Stephen Colebourne & Michael Nascimento Santos |
| * |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * |
| * * Redistributions of source code must retain the above copyright notice, |
| * this list of conditions and the following disclaimer. |
| * |
| * * Redistributions in binary form must reproduce the above copyright notice, |
| * this list of conditions and the following disclaimer in the documentation |
| * and/or other materials provided with the distribution. |
| * |
| * * Neither the name of JSR-310 nor the names of its contributors |
| * may be used to endorse or promote products derived from this software |
| * without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR |
| * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, |
| * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, |
| * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR |
| * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF |
| * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING |
| * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| package java.time; |
| |
| import java.time.zone.ZoneRules; |
| import java.time.temporal.TemporalAccessor; |
| import java.time.temporal.TemporalQuery; |
| import java.time.format.DateTimeParseException; |
| import java.time.format.DateTimeFormatter; |
| import java.time.temporal.TemporalField; |
| import java.time.temporal.ChronoField; |
| import java.time.temporal.Temporal; |
| import java.time.temporal.TemporalUnit; |
| import java.time.temporal.ChronoUnit; |
| import java.time.temporal.UnsupportedTemporalTypeException; |
| import java.time.temporal.TemporalAdjuster; |
| import java.time.temporal.TemporalAmount; |
| |
| /** |
| * A date-time with a time-zone in the ISO-8601 calendar system, |
| * such as {@code 2007-12-03T10:15:30+01:00 Europe/Paris}. |
| * <p> |
| * {@code ZonedDateTime} is an immutable representation of a date-time with a time-zone. |
| * This class stores all date and time fields, to a precision of nanoseconds, |
| * and a time-zone, with a zone offset used to handle ambiguous local date-times. |
| * For example, the value |
| * "2nd October 2007 at 13:45.30.123456789 +02:00 in the Europe/Paris time-zone" |
| * can be stored in a {@code ZonedDateTime}. |
| * <p> |
| * This class handles conversion from the local time-line of {@code LocalDateTime} |
| * to the instant time-line of {@code Instant}. |
| * The difference between the two time-lines is the offset from UTC/Greenwich, |
| * represented by a {@code ZoneOffset}. |
| * <p> |
| * Converting between the two time-lines involves calculating the offset using the |
| * {@link java.time.zone.ZoneRules ZoneRules} accessed from the {@code ZoneId}. |
| * Obtaining the offset for an instant is simple, as there is exactly one valid |
| * offset for each instant. By contrast, obtaining the offset for a local date-time |
| * is not straightforward. There are three cases: |
| * <ul> |
| * <li>Normal, with one valid offset. For the vast majority of the year, the normal |
| * case applies, where there is a single valid offset for the local date-time.</li> |
| * <li>Gap, with zero valid offsets. This is when clocks jump forward typically |
| * due to the spring daylight savings change from "winter" to "summer". |
| * In a gap there are local date-time values with no valid offset.</li> |
| * <li>Overlap, with two valid offsets. This is when clocks are set back typically |
| * due to the autumn daylight savings change from "summer" to "winter". |
| * In an overlap there are local date-time values with two valid offsets.</li> |
| * </ul> |
| * <p> |
| * Any method that converts directly or implicitly from a local date-time to an |
| * instant by obtaining the offset has the potential to be complicated. |
| * <p> |
| * For Gaps, the general strategy is that if the local date-time falls in the |
| * middle of a Gap, then the resulting zoned date-time will have a local date-time |
| * shifted forwards by the length of the Gap, resulting in a date-time in the later |
| * offset, typically "summer" time. |
| * <p> |
| * For Overlaps, the general strategy is that if the local date-time falls in the |
| * middle of an Overlap, then the previous offset will be retained. If there is no |
| * previous offset, or the previous offset is invalid, then the earlier offset is |
| * used, typically "summer" time.. Two additional methods, |
| * {@link #withEarlierOffsetAtOverlap()} and {@link #withLaterOffsetAtOverlap()}, |
| * help manage the case of an overlap. |
| * <p> |
| * In terms of design, this class should be viewed primarily as the combination |
| * of a {@code LocalDateTime} and a {@code ZoneId}. The {@code ZoneOffset} is |
| * a vital, but secondary, piece of information, used to ensure that the class |
| * represents an instant, especially during a daylight savings overlap. |
| * |
| * @implSpec |
| * A {@code ZonedDateTime} holds state equivalent to three separate objects, |
| * a {@code LocalDateTime}, a {@code ZoneId} and the resolved {@code ZoneOffset}. |
| * The offset and local date-time are used to define an instant when necessary. |
| * The zone ID is used to obtain the rules for how and when the offset changes. |
| * The offset cannot be freely set, as the zone controls which offsets are valid. |
| * <p> |
| * This class is immutable and thread-safe. |
| * |
| * @since 1.8 |
| */ |
| |
| @SuppressWarnings({"unchecked", "deprecation", "all"}) |
| public final class ZonedDateTime implements java.time.temporal.Temporal, java.time.chrono.ChronoZonedDateTime<java.time.LocalDate>, java.io.Serializable { |
| |
| private ZonedDateTime() { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Obtains the current date-time from the system clock in the default time-zone. |
| * <p> |
| * This will query the {@link java.time.Clock#systemDefaultZone() Clock#systemDefaultZone()} in the default |
| * time-zone to obtain the current date-time. |
| * The zone and offset will be set based on the time-zone in the clock. |
| * <p> |
| * Using this method will prevent the ability to use an alternate clock for testing |
| * because the clock is hard-coded. |
| * |
| * @return the current date-time using the system clock, not null |
| */ |
| |
| public static java.time.ZonedDateTime now() { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Obtains the current date-time from the system clock in the specified time-zone. |
| * <p> |
| * This will query the {@link java.time.Clock#system(java.time.ZoneId) Clock#system(ZoneId)} to obtain the current date-time. |
| * Specifying the time-zone avoids dependence on the default time-zone. |
| * The offset will be calculated from the specified time-zone. |
| * <p> |
| * Using this method will prevent the ability to use an alternate clock for testing |
| * because the clock is hard-coded. |
| * |
| * @param zone the zone ID to use, not null |
| * @return the current date-time using the system clock, not null |
| */ |
| |
| public static java.time.ZonedDateTime now(java.time.ZoneId zone) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Obtains the current date-time from the specified clock. |
| * <p> |
| * This will query the specified clock to obtain the current date-time. |
| * The zone and offset will be set based on the time-zone in the clock. |
| * <p> |
| * Using this method allows the use of an alternate clock for testing. |
| * The alternate clock may be introduced using {@link java.time.Clock Clock}. |
| * |
| * @param clock the clock to use, not null |
| * @return the current date-time, not null |
| */ |
| |
| public static java.time.ZonedDateTime now(java.time.Clock clock) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Obtains an instance of {@code ZonedDateTime} from a local date and time. |
| * <p> |
| * This creates a zoned date-time matching the input local date and time as closely as possible. |
| * Time-zone rules, such as daylight savings, mean that not every local date-time |
| * is valid for the specified zone, thus the local date-time may be adjusted. |
| * <p> |
| * The local date time and first combined to form a local date-time. |
| * The local date-time is then resolved to a single instant on the time-line. |
| * This is achieved by finding a valid offset from UTC/Greenwich for the local |
| * date-time as defined by the {@link java.time.zone.ZoneRules ZoneRules} of the zone ID. |
| *<p> |
| * In most cases, there is only one valid offset for a local date-time. |
| * In the case of an overlap, when clocks are set back, there are two valid offsets. |
| * This method uses the earlier offset typically corresponding to "summer". |
| * <p> |
| * In the case of a gap, when clocks jump forward, there is no valid offset. |
| * Instead, the local date-time is adjusted to be later by the length of the gap. |
| * For a typical one hour daylight savings change, the local date-time will be |
| * moved one hour later into the offset typically corresponding to "summer". |
| * |
| * @param date the local date, not null |
| * @param time the local time, not null |
| * @param zone the time-zone, not null |
| * @return the offset date-time, not null |
| */ |
| |
| public static java.time.ZonedDateTime of(java.time.LocalDate date, java.time.LocalTime time, java.time.ZoneId zone) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Obtains an instance of {@code ZonedDateTime} from a local date-time. |
| * <p> |
| * This creates a zoned date-time matching the input local date-time as closely as possible. |
| * Time-zone rules, such as daylight savings, mean that not every local date-time |
| * is valid for the specified zone, thus the local date-time may be adjusted. |
| * <p> |
| * The local date-time is resolved to a single instant on the time-line. |
| * This is achieved by finding a valid offset from UTC/Greenwich for the local |
| * date-time as defined by the {@link java.time.zone.ZoneRules ZoneRules} of the zone ID. |
| *<p> |
| * In most cases, there is only one valid offset for a local date-time. |
| * In the case of an overlap, when clocks are set back, there are two valid offsets. |
| * This method uses the earlier offset typically corresponding to "summer". |
| * <p> |
| * In the case of a gap, when clocks jump forward, there is no valid offset. |
| * Instead, the local date-time is adjusted to be later by the length of the gap. |
| * For a typical one hour daylight savings change, the local date-time will be |
| * moved one hour later into the offset typically corresponding to "summer". |
| * |
| * @param localDateTime the local date-time, not null |
| * @param zone the time-zone, not null |
| * @return the zoned date-time, not null |
| */ |
| |
| public static java.time.ZonedDateTime of(java.time.LocalDateTime localDateTime, java.time.ZoneId zone) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Obtains an instance of {@code ZonedDateTime} from a year, month, day, |
| * hour, minute, second, nanosecond and time-zone. |
| * <p> |
| * This creates a zoned date-time matching the local date-time of the seven |
| * specified fields as closely as possible. |
| * Time-zone rules, such as daylight savings, mean that not every local date-time |
| * is valid for the specified zone, thus the local date-time may be adjusted. |
| * <p> |
| * The local date-time is resolved to a single instant on the time-line. |
| * This is achieved by finding a valid offset from UTC/Greenwich for the local |
| * date-time as defined by the {@link java.time.zone.ZoneRules ZoneRules} of the zone ID. |
| *<p> |
| * In most cases, there is only one valid offset for a local date-time. |
| * In the case of an overlap, when clocks are set back, there are two valid offsets. |
| * This method uses the earlier offset typically corresponding to "summer". |
| * <p> |
| * In the case of a gap, when clocks jump forward, there is no valid offset. |
| * Instead, the local date-time is adjusted to be later by the length of the gap. |
| * For a typical one hour daylight savings change, the local date-time will be |
| * moved one hour later into the offset typically corresponding to "summer". |
| * <p> |
| * This method exists primarily for writing test cases. |
| * Non test-code will typically use other methods to create an offset time. |
| * {@code LocalDateTime} has five additional convenience variants of the |
| * equivalent factory method taking fewer arguments. |
| * They are not provided here to reduce the footprint of the API. |
| * |
| * @param year the year to represent, from MIN_YEAR to MAX_YEAR |
| * @param month the month-of-year to represent, from 1 (January) to 12 (December) |
| * @param dayOfMonth the day-of-month to represent, from 1 to 31 |
| * @param hour the hour-of-day to represent, from 0 to 23 |
| * @param minute the minute-of-hour to represent, from 0 to 59 |
| * @param second the second-of-minute to represent, from 0 to 59 |
| * @param nanoOfSecond the nano-of-second to represent, from 0 to 999,999,999 |
| * @param zone the time-zone, not null |
| * @return the offset date-time, not null |
| * @throws java.time.DateTimeException if the value of any field is out of range, or |
| * if the day-of-month is invalid for the month-year |
| */ |
| |
| public static java.time.ZonedDateTime of(int year, int month, int dayOfMonth, int hour, int minute, int second, int nanoOfSecond, java.time.ZoneId zone) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Obtains an instance of {@code ZonedDateTime} from a local date-time |
| * using the preferred offset if possible. |
| * <p> |
| * The local date-time is resolved to a single instant on the time-line. |
| * This is achieved by finding a valid offset from UTC/Greenwich for the local |
| * date-time as defined by the {@link java.time.zone.ZoneRules ZoneRules} of the zone ID. |
| *<p> |
| * In most cases, there is only one valid offset for a local date-time. |
| * In the case of an overlap, where clocks are set back, there are two valid offsets. |
| * If the preferred offset is one of the valid offsets then it is used. |
| * Otherwise the earlier valid offset is used, typically corresponding to "summer". |
| * <p> |
| * In the case of a gap, where clocks jump forward, there is no valid offset. |
| * Instead, the local date-time is adjusted to be later by the length of the gap. |
| * For a typical one hour daylight savings change, the local date-time will be |
| * moved one hour later into the offset typically corresponding to "summer". |
| * |
| * @param localDateTime the local date-time, not null |
| * @param zone the time-zone, not null |
| * @param preferredOffset the zone offset, null if no preference |
| * @return the zoned date-time, not null |
| */ |
| |
| public static java.time.ZonedDateTime ofLocal(java.time.LocalDateTime localDateTime, java.time.ZoneId zone, java.time.ZoneOffset preferredOffset) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Obtains an instance of {@code ZonedDateTime} from an {@code Instant}. |
| * <p> |
| * This creates a zoned date-time with the same instant as that specified. |
| * Calling {@link #toInstant()} will return an instant equal to the one used here. |
| * <p> |
| * Converting an instant to a zoned date-time is simple as there is only one valid |
| * offset for each instant. |
| * |
| * @param instant the instant to create the date-time from, not null |
| * @param zone the time-zone, not null |
| * @return the zoned date-time, not null |
| * @throws java.time.DateTimeException if the result exceeds the supported range |
| */ |
| |
| public static java.time.ZonedDateTime ofInstant(java.time.Instant instant, java.time.ZoneId zone) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Obtains an instance of {@code ZonedDateTime} from the instant formed by combining |
| * the local date-time and offset. |
| * <p> |
| * This creates a zoned date-time by {@link java.time.LocalDateTime#toInstant(java.time.ZoneOffset) LocalDateTime#toInstant(ZoneOffset)} |
| * the {@code LocalDateTime} and {@code ZoneOffset}. |
| * This combination uniquely specifies an instant without ambiguity. |
| * <p> |
| * Converting an instant to a zoned date-time is simple as there is only one valid |
| * offset for each instant. If the valid offset is different to the offset specified, |
| * then the date-time and offset of the zoned date-time will differ from those specified. |
| * <p> |
| * If the {@code ZoneId} to be used is a {@code ZoneOffset}, this method is equivalent |
| * to {@link #of(java.time.LocalDateTime,java.time.ZoneId)}. |
| * |
| * @param localDateTime the local date-time, not null |
| * @param offset the zone offset, not null |
| * @param zone the time-zone, not null |
| * @return the zoned date-time, not null |
| */ |
| |
| public static java.time.ZonedDateTime ofInstant(java.time.LocalDateTime localDateTime, java.time.ZoneOffset offset, java.time.ZoneId zone) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Obtains an instance of {@code ZonedDateTime} strictly validating the |
| * combination of local date-time, offset and zone ID. |
| * <p> |
| * This creates a zoned date-time ensuring that the offset is valid for the |
| * local date-time according to the rules of the specified zone. |
| * If the offset is invalid, an exception is thrown. |
| * |
| * @param localDateTime the local date-time, not null |
| * @param offset the zone offset, not null |
| * @param zone the time-zone, not null |
| * @return the zoned date-time, not null |
| */ |
| |
| public static java.time.ZonedDateTime ofStrict(java.time.LocalDateTime localDateTime, java.time.ZoneOffset offset, java.time.ZoneId zone) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Obtains an instance of {@code ZonedDateTime} from a temporal object. |
| * <p> |
| * This obtains a zoned date-time based on the specified temporal. |
| * A {@code TemporalAccessor} represents an arbitrary set of date and time information, |
| * which this factory converts to an instance of {@code ZonedDateTime}. |
| * <p> |
| * The conversion will first obtain a {@code ZoneId} from the temporal object, |
| * falling back to a {@code ZoneOffset} if necessary. It will then try to obtain |
| * an {@code Instant}, falling back to a {@code LocalDateTime} if necessary. |
| * The result will be either the combination of {@code ZoneId} or {@code ZoneOffset} |
| * with {@code Instant} or {@code LocalDateTime}. |
| * Implementations are permitted to perform optimizations such as accessing |
| * those fields that are equivalent to the relevant objects. |
| * <p> |
| * This method matches the signature of the functional interface {@link java.time.temporal.TemporalQuery TemporalQuery} |
| * allowing it to be used as a query via method reference, {@code ZonedDateTime::from}. |
| * |
| * @param temporal the temporal object to convert, not null |
| * @return the zoned date-time, not null |
| * @throws java.time.DateTimeException if unable to convert to an {@code ZonedDateTime} |
| */ |
| |
| public static java.time.ZonedDateTime from(java.time.temporal.TemporalAccessor temporal) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Obtains an instance of {@code ZonedDateTime} from a text string such as |
| * {@code 2007-12-03T10:15:30+01:00[Europe/Paris]}. |
| * <p> |
| * The string must represent a valid date-time and is parsed using |
| * {@link java.time.format.DateTimeFormatter#ISO_ZONED_DATE_TIME}. |
| * |
| * @param text the text to parse such as "2007-12-03T10:15:30+01:00[Europe/Paris]", not null |
| * @return the parsed zoned date-time, not null |
| * @throws java.time.format.DateTimeParseException if the text cannot be parsed |
| */ |
| |
| public static java.time.ZonedDateTime parse(java.lang.CharSequence text) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Obtains an instance of {@code ZonedDateTime} from a text string using a specific formatter. |
| * <p> |
| * The text is parsed using the formatter, returning a date-time. |
| * |
| * @param text the text to parse, not null |
| * @param formatter the formatter to use, not null |
| * @return the parsed zoned date-time, not null |
| * @throws java.time.format.DateTimeParseException if the text cannot be parsed |
| */ |
| |
| public static java.time.ZonedDateTime parse(java.lang.CharSequence text, java.time.format.DateTimeFormatter formatter) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Checks if the specified field is supported. |
| * <p> |
| * This checks if this date-time can be queried for the specified field. |
| * If false, then calling the {@link #range(java.time.temporal.TemporalField) range}, |
| * {@link #get(java.time.temporal.TemporalField) get} and {@link #with(java.time.temporal.TemporalField,long)} |
| * methods will throw an exception. |
| * <p> |
| * If the field is a {@link java.time.temporal.ChronoField ChronoField} then the query is implemented here. |
| * The supported fields are: |
| * <ul> |
| * <li>{@code NANO_OF_SECOND} |
| * <li>{@code NANO_OF_DAY} |
| * <li>{@code MICRO_OF_SECOND} |
| * <li>{@code MICRO_OF_DAY} |
| * <li>{@code MILLI_OF_SECOND} |
| * <li>{@code MILLI_OF_DAY} |
| * <li>{@code SECOND_OF_MINUTE} |
| * <li>{@code SECOND_OF_DAY} |
| * <li>{@code MINUTE_OF_HOUR} |
| * <li>{@code MINUTE_OF_DAY} |
| * <li>{@code HOUR_OF_AMPM} |
| * <li>{@code CLOCK_HOUR_OF_AMPM} |
| * <li>{@code HOUR_OF_DAY} |
| * <li>{@code CLOCK_HOUR_OF_DAY} |
| * <li>{@code AMPM_OF_DAY} |
| * <li>{@code DAY_OF_WEEK} |
| * <li>{@code ALIGNED_DAY_OF_WEEK_IN_MONTH} |
| * <li>{@code ALIGNED_DAY_OF_WEEK_IN_YEAR} |
| * <li>{@code DAY_OF_MONTH} |
| * <li>{@code DAY_OF_YEAR} |
| * <li>{@code EPOCH_DAY} |
| * <li>{@code ALIGNED_WEEK_OF_MONTH} |
| * <li>{@code ALIGNED_WEEK_OF_YEAR} |
| * <li>{@code MONTH_OF_YEAR} |
| * <li>{@code PROLEPTIC_MONTH} |
| * <li>{@code YEAR_OF_ERA} |
| * <li>{@code YEAR} |
| * <li>{@code ERA} |
| * <li>{@code INSTANT_SECONDS} |
| * <li>{@code OFFSET_SECONDS} |
| * </ul> |
| * All other {@code ChronoField} instances will return false. |
| * <p> |
| * If the field is not a {@code ChronoField}, then the result of this method |
| * is obtained by invoking {@code TemporalField.isSupportedBy(TemporalAccessor)} |
| * passing {@code this} as the argument. |
| * Whether the field is supported is determined by the field. |
| * |
| * @param field the field to check, null returns false |
| * @return true if the field is supported on this date-time, false if not |
| */ |
| |
| public boolean isSupported(java.time.temporal.TemporalField field) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Checks if the specified unit is supported. |
| * <p> |
| * This checks if the specified unit can be added to, or subtracted from, this date-time. |
| * If false, then calling the {@link #plus(long,java.time.temporal.TemporalUnit)} and |
| * {@link #minus(long,java.time.temporal.TemporalUnit) minus} methods will throw an exception. |
| * <p> |
| * If the unit is a {@link java.time.temporal.ChronoUnit ChronoUnit} then the query is implemented here. |
| * The supported units are: |
| * <ul> |
| * <li>{@code NANOS} |
| * <li>{@code MICROS} |
| * <li>{@code MILLIS} |
| * <li>{@code SECONDS} |
| * <li>{@code MINUTES} |
| * <li>{@code HOURS} |
| * <li>{@code HALF_DAYS} |
| * <li>{@code DAYS} |
| * <li>{@code WEEKS} |
| * <li>{@code MONTHS} |
| * <li>{@code YEARS} |
| * <li>{@code DECADES} |
| * <li>{@code CENTURIES} |
| * <li>{@code MILLENNIA} |
| * <li>{@code ERAS} |
| * </ul> |
| * All other {@code ChronoUnit} instances will return false. |
| * <p> |
| * If the unit is not a {@code ChronoUnit}, then the result of this method |
| * is obtained by invoking {@code TemporalUnit.isSupportedBy(Temporal)} |
| * passing {@code this} as the argument. |
| * Whether the unit is supported is determined by the unit. |
| * |
| * @param unit the unit to check, null returns false |
| * @return true if the unit can be added/subtracted, false if not |
| */ |
| |
| public boolean isSupported(java.time.temporal.TemporalUnit unit) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Gets the range of valid values for the specified field. |
| * <p> |
| * The range object expresses the minimum and maximum valid values for a field. |
| * This date-time is used to enhance the accuracy of the returned range. |
| * If it is not possible to return the range, because the field is not supported |
| * or for some other reason, an exception is thrown. |
| * <p> |
| * If the field is a {@link java.time.temporal.ChronoField ChronoField} then the query is implemented here. |
| * The {@link #isSupported(java.time.temporal.TemporalField) supported fields} will return |
| * appropriate range instances. |
| * All other {@code ChronoField} instances will throw an {@code UnsupportedTemporalTypeException}. |
| * <p> |
| * If the field is not a {@code ChronoField}, then the result of this method |
| * is obtained by invoking {@code TemporalField.rangeRefinedBy(TemporalAccessor)} |
| * passing {@code this} as the argument. |
| * Whether the range can be obtained is determined by the field. |
| * |
| * @param field the field to query the range for, not null |
| * @return the range of valid values for the field, not null |
| * @throws java.time.DateTimeException if the range for the field cannot be obtained |
| * @throws java.time.temporal.UnsupportedTemporalTypeException if the field is not supported |
| */ |
| |
| public java.time.temporal.ValueRange range(java.time.temporal.TemporalField field) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Gets the value of the specified field from this date-time as an {@code int}. |
| * <p> |
| * This queries this date-time for the value of the specified field. |
| * The returned value will always be within the valid range of values for the field. |
| * If it is not possible to return the value, because the field is not supported |
| * or for some other reason, an exception is thrown. |
| * <p> |
| * If the field is a {@link java.time.temporal.ChronoField ChronoField} then the query is implemented here. |
| * The {@link #isSupported(java.time.temporal.TemporalField) supported fields} will return valid |
| * values based on this date-time, except {@code NANO_OF_DAY}, {@code MICRO_OF_DAY}, |
| * {@code EPOCH_DAY}, {@code PROLEPTIC_MONTH} and {@code INSTANT_SECONDS} which are too |
| * large to fit in an {@code int} and throw a {@code DateTimeException}. |
| * All other {@code ChronoField} instances will throw an {@code UnsupportedTemporalTypeException}. |
| * <p> |
| * If the field is not a {@code ChronoField}, then the result of this method |
| * is obtained by invoking {@code TemporalField.getFrom(TemporalAccessor)} |
| * passing {@code this} as the argument. Whether the value can be obtained, |
| * and what the value represents, is determined by the field. |
| * |
| * @param field the field to get, not null |
| * @return the value for the field |
| * @throws java.time.DateTimeException if a value for the field cannot be obtained or |
| * the value is outside the range of valid values for the field |
| * @throws java.time.temporal.UnsupportedTemporalTypeException if the field is not supported or |
| * the range of values exceeds an {@code int} |
| * @throws java.lang.ArithmeticException if numeric overflow occurs |
| */ |
| |
| public int get(java.time.temporal.TemporalField field) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Gets the value of the specified field from this date-time as a {@code long}. |
| * <p> |
| * This queries this date-time for the value of the specified field. |
| * If it is not possible to return the value, because the field is not supported |
| * or for some other reason, an exception is thrown. |
| * <p> |
| * If the field is a {@link java.time.temporal.ChronoField ChronoField} then the query is implemented here. |
| * The {@link #isSupported(java.time.temporal.TemporalField) supported fields} will return valid |
| * values based on this date-time. |
| * All other {@code ChronoField} instances will throw an {@code UnsupportedTemporalTypeException}. |
| * <p> |
| * If the field is not a {@code ChronoField}, then the result of this method |
| * is obtained by invoking {@code TemporalField.getFrom(TemporalAccessor)} |
| * passing {@code this} as the argument. Whether the value can be obtained, |
| * and what the value represents, is determined by the field. |
| * |
| * @param field the field to get, not null |
| * @return the value for the field |
| * @throws java.time.DateTimeException if a value for the field cannot be obtained |
| * @throws java.time.temporal.UnsupportedTemporalTypeException if the field is not supported |
| * @throws java.lang.ArithmeticException if numeric overflow occurs |
| */ |
| |
| public long getLong(java.time.temporal.TemporalField field) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Gets the zone offset, such as '+01:00'. |
| * <p> |
| * This is the offset of the local date-time from UTC/Greenwich. |
| * |
| * @return the zone offset, not null |
| */ |
| |
| public java.time.ZoneOffset getOffset() { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a copy of this date-time changing the zone offset to the |
| * earlier of the two valid offsets at a local time-line overlap. |
| * <p> |
| * This method only has any effect when the local time-line overlaps, such as |
| * at an autumn daylight savings cutover. In this scenario, there are two |
| * valid offsets for the local date-time. Calling this method will return |
| * a zoned date-time with the earlier of the two selected. |
| * <p> |
| * If this method is called when it is not an overlap, {@code this} |
| * is returned. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @return a {@code ZonedDateTime} based on this date-time with the earlier offset, not null |
| */ |
| |
| public java.time.ZonedDateTime withEarlierOffsetAtOverlap() { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a copy of this date-time changing the zone offset to the |
| * later of the two valid offsets at a local time-line overlap. |
| * <p> |
| * This method only has any effect when the local time-line overlaps, such as |
| * at an autumn daylight savings cutover. In this scenario, there are two |
| * valid offsets for the local date-time. Calling this method will return |
| * a zoned date-time with the later of the two selected. |
| * <p> |
| * If this method is called when it is not an overlap, {@code this} |
| * is returned. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @return a {@code ZonedDateTime} based on this date-time with the later offset, not null |
| */ |
| |
| public java.time.ZonedDateTime withLaterOffsetAtOverlap() { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Gets the time-zone, such as 'Europe/Paris'. |
| * <p> |
| * This returns the zone ID. This identifies the time-zone {@link java.time.zone.ZoneRules ZoneRules} |
| * that determine when and how the offset from UTC/Greenwich changes. |
| * <p> |
| * The zone ID may be same as the {@linkplain #getOffset() offset}. |
| * If this is true, then any future calculations, such as addition or subtraction, |
| * have no complex edge cases due to time-zone rules. |
| * See also {@link #withFixedOffsetZone()}. |
| * |
| * @return the time-zone, not null |
| */ |
| |
| public java.time.ZoneId getZone() { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a copy of this date-time with a different time-zone, |
| * retaining the local date-time if possible. |
| * <p> |
| * This method changes the time-zone and retains the local date-time. |
| * The local date-time is only changed if it is invalid for the new zone, |
| * determined using the same approach as |
| * {@link #ofLocal(java.time.LocalDateTime,java.time.ZoneId,java.time.ZoneOffset)}. |
| * <p> |
| * To change the zone and adjust the local date-time, |
| * use {@link #withZoneSameInstant(java.time.ZoneId)}. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param zone the time-zone to change to, not null |
| * @return a {@code ZonedDateTime} based on this date-time with the requested zone, not null |
| */ |
| |
| public java.time.ZonedDateTime withZoneSameLocal(java.time.ZoneId zone) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a copy of this date-time with a different time-zone, |
| * retaining the instant. |
| * <p> |
| * This method changes the time-zone and retains the instant. |
| * This normally results in a change to the local date-time. |
| * <p> |
| * This method is based on retaining the same instant, thus gaps and overlaps |
| * in the local time-line have no effect on the result. |
| * <p> |
| * To change the offset while keeping the local time, |
| * use {@link #withZoneSameLocal(java.time.ZoneId)}. |
| * |
| * @param zone the time-zone to change to, not null |
| * @return a {@code ZonedDateTime} based on this date-time with the requested zone, not null |
| * @throws java.time.DateTimeException if the result exceeds the supported date range |
| */ |
| |
| public java.time.ZonedDateTime withZoneSameInstant(java.time.ZoneId zone) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a copy of this date-time with the zone ID set to the offset. |
| * <p> |
| * This returns a zoned date-time where the zone ID is the same as {@link #getOffset()}. |
| * The local date-time, offset and instant of the result will be the same as in this date-time. |
| * <p> |
| * Setting the date-time to a fixed single offset means that any future |
| * calculations, such as addition or subtraction, have no complex edge cases |
| * due to time-zone rules. |
| * This might also be useful when sending a zoned date-time across a network, |
| * as most protocols, such as ISO-8601, only handle offsets, |
| * and not region-based zone IDs. |
| * <p> |
| * This is equivalent to {@code ZonedDateTime.of(zdt.toLocalDateTime(), zdt.getOffset())}. |
| * |
| * @return a {@code ZonedDateTime} with the zone ID set to the offset, not null |
| */ |
| |
| public java.time.ZonedDateTime withFixedOffsetZone() { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Gets the {@code LocalDateTime} part of this date-time. |
| * <p> |
| * This returns a {@code LocalDateTime} with the same year, month, day and time |
| * as this date-time. |
| * |
| * @return the local date-time part of this date-time, not null |
| */ |
| |
| public java.time.LocalDateTime toLocalDateTime() { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Gets the {@code LocalDate} part of this date-time. |
| * <p> |
| * This returns a {@code LocalDate} with the same year, month and day |
| * as this date-time. |
| * |
| * @return the date part of this date-time, not null |
| */ |
| |
| public java.time.LocalDate toLocalDate() { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Gets the year field. |
| * <p> |
| * This method returns the primitive {@code int} value for the year. |
| * <p> |
| * The year returned by this method is proleptic as per {@code get(YEAR)}. |
| * To obtain the year-of-era, use {@code get(YEAR_OF_ERA)}. |
| * |
| * @return the year, from MIN_YEAR to MAX_YEAR |
| */ |
| |
| public int getYear() { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Gets the month-of-year field from 1 to 12. |
| * <p> |
| * This method returns the month as an {@code int} from 1 to 12. |
| * Application code is frequently clearer if the enum {@link java.time.Month Month} |
| * is used by calling {@link #getMonth()}. |
| * |
| * @return the month-of-year, from 1 to 12 |
| * @see #getMonth() |
| */ |
| |
| public int getMonthValue() { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Gets the month-of-year field using the {@code Month} enum. |
| * <p> |
| * This method returns the enum {@link java.time.Month Month} for the month. |
| * This avoids confusion as to what {@code int} values mean. |
| * If you need access to the primitive {@code int} value then the enum |
| * provides the {@link java.time.Month#getValue() Month#getValue()}. |
| * |
| * @return the month-of-year, not null |
| * @see #getMonthValue() |
| */ |
| |
| public java.time.Month getMonth() { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Gets the day-of-month field. |
| * <p> |
| * This method returns the primitive {@code int} value for the day-of-month. |
| * |
| * @return the day-of-month, from 1 to 31 |
| */ |
| |
| public int getDayOfMonth() { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Gets the day-of-year field. |
| * <p> |
| * This method returns the primitive {@code int} value for the day-of-year. |
| * |
| * @return the day-of-year, from 1 to 365, or 366 in a leap year |
| */ |
| |
| public int getDayOfYear() { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Gets the day-of-week field, which is an enum {@code DayOfWeek}. |
| * <p> |
| * This method returns the enum {@link java.time.DayOfWeek DayOfWeek} for the day-of-week. |
| * This avoids confusion as to what {@code int} values mean. |
| * If you need access to the primitive {@code int} value then the enum |
| * provides the {@link java.time.DayOfWeek#getValue() DayOfWeek#getValue()}. |
| * <p> |
| * Additional information can be obtained from the {@code DayOfWeek}. |
| * This includes textual names of the values. |
| * |
| * @return the day-of-week, not null |
| */ |
| |
| public java.time.DayOfWeek getDayOfWeek() { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Gets the {@code LocalTime} part of this date-time. |
| * <p> |
| * This returns a {@code LocalTime} with the same hour, minute, second and |
| * nanosecond as this date-time. |
| * |
| * @return the time part of this date-time, not null |
| */ |
| |
| public java.time.LocalTime toLocalTime() { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Gets the hour-of-day field. |
| * |
| * @return the hour-of-day, from 0 to 23 |
| */ |
| |
| public int getHour() { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Gets the minute-of-hour field. |
| * |
| * @return the minute-of-hour, from 0 to 59 |
| */ |
| |
| public int getMinute() { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Gets the second-of-minute field. |
| * |
| * @return the second-of-minute, from 0 to 59 |
| */ |
| |
| public int getSecond() { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Gets the nano-of-second field. |
| * |
| * @return the nano-of-second, from 0 to 999,999,999 |
| */ |
| |
| public int getNano() { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns an adjusted copy of this date-time. |
| * <p> |
| * This returns a {@code ZonedDateTime}, based on this one, with the date-time adjusted. |
| * The adjustment takes place using the specified adjuster strategy object. |
| * Read the documentation of the adjuster to understand what adjustment will be made. |
| * <p> |
| * A simple adjuster might simply set the one of the fields, such as the year field. |
| * A more complex adjuster might set the date to the last day of the month. |
| * A selection of common adjustments is provided in |
| * {@link java.time.temporal.TemporalAdjusters TemporalAdjusters}. |
| * These include finding the "last day of the month" and "next Wednesday". |
| * Key date-time classes also implement the {@code TemporalAdjuster} interface, |
| * such as {@link java.time.Month Month} and {@link java.time.MonthDay MonthDay}. |
| * The adjuster is responsible for handling special cases, such as the varying |
| * lengths of month and leap years. |
| * <p> |
| * For example this code returns a date on the last day of July: |
| * <pre> |
| * import static java.time.Month.*; |
| * import static java.time.temporal.TemporalAdjusters.*; |
| * |
| * result = zonedDateTime.with(JULY).with(lastDayOfMonth()); |
| * </pre> |
| * <p> |
| * The classes {@link java.time.LocalDate LocalDate} and {@link java.time.LocalTime LocalTime} implement {@code TemporalAdjuster}, |
| * thus this method can be used to change the date, time or offset: |
| * <pre> |
| * result = zonedDateTime.with(date); |
| * result = zonedDateTime.with(time); |
| * </pre> |
| * <p> |
| * {@link java.time.ZoneOffset ZoneOffset} also implements {@code TemporalAdjuster} however using it |
| * as an argument typically has no effect. The offset of a {@code ZonedDateTime} is |
| * controlled primarily by the time-zone. As such, changing the offset does not generally |
| * make sense, because there is only one valid offset for the local date-time and zone. |
| * If the zoned date-time is in a daylight savings overlap, then the offset is used |
| * to switch between the two valid offsets. In all other cases, the offset is ignored. |
| * <p> |
| * The result of this method is obtained by invoking the |
| * {@link java.time.temporal.TemporalAdjuster#adjustInto(java.time.temporal.Temporal) TemporalAdjuster#adjustInto(Temporal)} method on the |
| * specified adjuster passing {@code this} as the argument. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param adjuster the adjuster to use, not null |
| * @return a {@code ZonedDateTime} based on {@code this} with the adjustment made, not null |
| * @throws java.time.DateTimeException if the adjustment cannot be made |
| * @throws java.lang.ArithmeticException if numeric overflow occurs |
| */ |
| |
| public java.time.ZonedDateTime with(java.time.temporal.TemporalAdjuster adjuster) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a copy of this date-time with the specified field set to a new value. |
| * <p> |
| * This returns a {@code ZonedDateTime}, based on this one, with the value |
| * for the specified field changed. |
| * This can be used to change any supported field, such as the year, month or day-of-month. |
| * If it is not possible to set the value, because the field is not supported or for |
| * some other reason, an exception is thrown. |
| * <p> |
| * In some cases, changing the specified field can cause the resulting date-time to become invalid, |
| * such as changing the month from 31st January to February would make the day-of-month invalid. |
| * In cases like this, the field is responsible for resolving the date. Typically it will choose |
| * the previous valid date, which would be the last valid day of February in this example. |
| * <p> |
| * If the field is a {@link java.time.temporal.ChronoField ChronoField} then the adjustment is implemented here. |
| * <p> |
| * The {@code INSTANT_SECONDS} field will return a date-time with the specified instant. |
| * The zone and nano-of-second are unchanged. |
| * The result will have an offset derived from the new instant and original zone. |
| * If the new instant value is outside the valid range then a {@code DateTimeException} will be thrown. |
| * <p> |
| * The {@code OFFSET_SECONDS} field will typically be ignored. |
| * The offset of a {@code ZonedDateTime} is controlled primarily by the time-zone. |
| * As such, changing the offset does not generally make sense, because there is only |
| * one valid offset for the local date-time and zone. |
| * If the zoned date-time is in a daylight savings overlap, then the offset is used |
| * to switch between the two valid offsets. In all other cases, the offset is ignored. |
| * If the new offset value is outside the valid range then a {@code DateTimeException} will be thrown. |
| * <p> |
| * The other {@link #isSupported(java.time.temporal.TemporalField) supported fields} will behave as per |
| * the matching method on {@link java.time.LocalDateTime#with(java.time.temporal.TemporalField,long) LocalDateTime#with(TemporalField, long)}. |
| * The zone is not part of the calculation and will be unchanged. |
| * When converting back to {@code ZonedDateTime}, if the local date-time is in an overlap, |
| * then the offset will be retained if possible, otherwise the earlier offset will be used. |
| * If in a gap, the local date-time will be adjusted forward by the length of the gap. |
| * <p> |
| * All other {@code ChronoField} instances will throw an {@code UnsupportedTemporalTypeException}. |
| * <p> |
| * If the field is not a {@code ChronoField}, then the result of this method |
| * is obtained by invoking {@code TemporalField.adjustInto(Temporal, long)} |
| * passing {@code this} as the argument. In this case, the field determines |
| * whether and how to adjust the instant. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param field the field to set in the result, not null |
| * @param newValue the new value of the field in the result |
| * @return a {@code ZonedDateTime} based on {@code this} with the specified field set, not null |
| * @throws java.time.DateTimeException if the field cannot be set |
| * @throws java.time.temporal.UnsupportedTemporalTypeException if the field is not supported |
| * @throws java.lang.ArithmeticException if numeric overflow occurs |
| */ |
| |
| public java.time.ZonedDateTime with(java.time.temporal.TemporalField field, long newValue) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a copy of this {@code ZonedDateTime} with the year altered. |
| * <p> |
| * This operates on the local time-line, |
| * {@link java.time.LocalDateTime#withYear(int) LocalDateTime#withYear(int)} of the local date-time. |
| * This is then converted back to a {@code ZonedDateTime}, using the zone ID |
| * to obtain the offset. |
| * <p> |
| * When converting back to {@code ZonedDateTime}, if the local date-time is in an overlap, |
| * then the offset will be retained if possible, otherwise the earlier offset will be used. |
| * If in a gap, the local date-time will be adjusted forward by the length of the gap. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param year the year to set in the result, from MIN_YEAR to MAX_YEAR |
| * @return a {@code ZonedDateTime} based on this date-time with the requested year, not null |
| * @throws java.time.DateTimeException if the year value is invalid |
| */ |
| |
| public java.time.ZonedDateTime withYear(int year) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a copy of this {@code ZonedDateTime} with the month-of-year altered. |
| * <p> |
| * This operates on the local time-line, |
| * {@link java.time.LocalDateTime#withMonth(int) LocalDateTime#withMonth(int)} of the local date-time. |
| * This is then converted back to a {@code ZonedDateTime}, using the zone ID |
| * to obtain the offset. |
| * <p> |
| * When converting back to {@code ZonedDateTime}, if the local date-time is in an overlap, |
| * then the offset will be retained if possible, otherwise the earlier offset will be used. |
| * If in a gap, the local date-time will be adjusted forward by the length of the gap. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param month the month-of-year to set in the result, from 1 (January) to 12 (December) |
| * @return a {@code ZonedDateTime} based on this date-time with the requested month, not null |
| * @throws java.time.DateTimeException if the month-of-year value is invalid |
| */ |
| |
| public java.time.ZonedDateTime withMonth(int month) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a copy of this {@code ZonedDateTime} with the day-of-month altered. |
| * <p> |
| * This operates on the local time-line, |
| * {@link java.time.LocalDateTime#withDayOfMonth(int) LocalDateTime#withDayOfMonth(int)} of the local date-time. |
| * This is then converted back to a {@code ZonedDateTime}, using the zone ID |
| * to obtain the offset. |
| * <p> |
| * When converting back to {@code ZonedDateTime}, if the local date-time is in an overlap, |
| * then the offset will be retained if possible, otherwise the earlier offset will be used. |
| * If in a gap, the local date-time will be adjusted forward by the length of the gap. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param dayOfMonth the day-of-month to set in the result, from 1 to 28-31 |
| * @return a {@code ZonedDateTime} based on this date-time with the requested day, not null |
| * @throws java.time.DateTimeException if the day-of-month value is invalid, |
| * or if the day-of-month is invalid for the month-year |
| */ |
| |
| public java.time.ZonedDateTime withDayOfMonth(int dayOfMonth) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a copy of this {@code ZonedDateTime} with the day-of-year altered. |
| * <p> |
| * This operates on the local time-line, |
| * {@link java.time.LocalDateTime#withDayOfYear(int) LocalDateTime#withDayOfYear(int)} of the local date-time. |
| * This is then converted back to a {@code ZonedDateTime}, using the zone ID |
| * to obtain the offset. |
| * <p> |
| * When converting back to {@code ZonedDateTime}, if the local date-time is in an overlap, |
| * then the offset will be retained if possible, otherwise the earlier offset will be used. |
| * If in a gap, the local date-time will be adjusted forward by the length of the gap. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param dayOfYear the day-of-year to set in the result, from 1 to 365-366 |
| * @return a {@code ZonedDateTime} based on this date with the requested day, not null |
| * @throws java.time.DateTimeException if the day-of-year value is invalid, |
| * or if the day-of-year is invalid for the year |
| */ |
| |
| public java.time.ZonedDateTime withDayOfYear(int dayOfYear) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a copy of this {@code ZonedDateTime} with the hour-of-day altered. |
| * <p> |
| * This operates on the local time-line, |
| * {@linkplain java.time.LocalDateTime#withHour(int) LocalDateTime#withHour(int)} of the local date-time. |
| * This is then converted back to a {@code ZonedDateTime}, using the zone ID |
| * to obtain the offset. |
| * <p> |
| * When converting back to {@code ZonedDateTime}, if the local date-time is in an overlap, |
| * then the offset will be retained if possible, otherwise the earlier offset will be used. |
| * If in a gap, the local date-time will be adjusted forward by the length of the gap. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param hour the hour-of-day to set in the result, from 0 to 23 |
| * @return a {@code ZonedDateTime} based on this date-time with the requested hour, not null |
| * @throws java.time.DateTimeException if the hour value is invalid |
| */ |
| |
| public java.time.ZonedDateTime withHour(int hour) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a copy of this {@code ZonedDateTime} with the minute-of-hour altered. |
| * <p> |
| * This operates on the local time-line, |
| * {@linkplain java.time.LocalDateTime#withMinute(int) LocalDateTime#withMinute(int)} of the local date-time. |
| * This is then converted back to a {@code ZonedDateTime}, using the zone ID |
| * to obtain the offset. |
| * <p> |
| * When converting back to {@code ZonedDateTime}, if the local date-time is in an overlap, |
| * then the offset will be retained if possible, otherwise the earlier offset will be used. |
| * If in a gap, the local date-time will be adjusted forward by the length of the gap. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param minute the minute-of-hour to set in the result, from 0 to 59 |
| * @return a {@code ZonedDateTime} based on this date-time with the requested minute, not null |
| * @throws java.time.DateTimeException if the minute value is invalid |
| */ |
| |
| public java.time.ZonedDateTime withMinute(int minute) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a copy of this {@code ZonedDateTime} with the second-of-minute altered. |
| * <p> |
| * This operates on the local time-line, |
| * {@linkplain java.time.LocalDateTime#withSecond(int) LocalDateTime#withSecond(int)} of the local date-time. |
| * This is then converted back to a {@code ZonedDateTime}, using the zone ID |
| * to obtain the offset. |
| * <p> |
| * When converting back to {@code ZonedDateTime}, if the local date-time is in an overlap, |
| * then the offset will be retained if possible, otherwise the earlier offset will be used. |
| * If in a gap, the local date-time will be adjusted forward by the length of the gap. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param second the second-of-minute to set in the result, from 0 to 59 |
| * @return a {@code ZonedDateTime} based on this date-time with the requested second, not null |
| * @throws java.time.DateTimeException if the second value is invalid |
| */ |
| |
| public java.time.ZonedDateTime withSecond(int second) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a copy of this {@code ZonedDateTime} with the nano-of-second altered. |
| * <p> |
| * This operates on the local time-line, |
| * {@linkplain java.time.LocalDateTime#withNano(int) LocalDateTime#withNano(int)} of the local date-time. |
| * This is then converted back to a {@code ZonedDateTime}, using the zone ID |
| * to obtain the offset. |
| * <p> |
| * When converting back to {@code ZonedDateTime}, if the local date-time is in an overlap, |
| * then the offset will be retained if possible, otherwise the earlier offset will be used. |
| * If in a gap, the local date-time will be adjusted forward by the length of the gap. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param nanoOfSecond the nano-of-second to set in the result, from 0 to 999,999,999 |
| * @return a {@code ZonedDateTime} based on this date-time with the requested nanosecond, not null |
| * @throws java.time.DateTimeException if the nano value is invalid |
| */ |
| |
| public java.time.ZonedDateTime withNano(int nanoOfSecond) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a copy of this {@code ZonedDateTime} with the time truncated. |
| * <p> |
| * Truncation returns a copy of the original date-time with fields |
| * smaller than the specified unit set to zero. |
| * For example, truncating with the {@link java.time.temporal.ChronoUnit#MINUTES ChronoUnit#MINUTES} unit |
| * will set the second-of-minute and nano-of-second field to zero. |
| * <p> |
| * The unit must have a {@linkplain java.time.temporal.TemporalUnit#getDuration() TemporalUnit#getDuration()} |
| * that divides into the length of a standard day without remainder. |
| * This includes all supplied time units on {@link java.time.temporal.ChronoUnit ChronoUnit} and |
| * {@link java.time.temporal.ChronoUnit#DAYS ChronoUnit#DAYS}. Other units throw an exception. |
| * <p> |
| * This operates on the local time-line, |
| * {@link java.time.LocalDateTime#truncatedTo(java.time.temporal.TemporalUnit) LocalDateTime#truncatedTo(TemporalUnit)} |
| * the underlying local date-time. This is then converted back to a |
| * {@code ZonedDateTime}, using the zone ID to obtain the offset. |
| * <p> |
| * When converting back to {@code ZonedDateTime}, if the local date-time is in an overlap, |
| * then the offset will be retained if possible, otherwise the earlier offset will be used. |
| * If in a gap, the local date-time will be adjusted forward by the length of the gap. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param unit the unit to truncate to, not null |
| * @return a {@code ZonedDateTime} based on this date-time with the time truncated, not null |
| * @throws java.time.DateTimeException if unable to truncate |
| * @throws java.time.temporal.UnsupportedTemporalTypeException if the unit is not supported |
| */ |
| |
| public java.time.ZonedDateTime truncatedTo(java.time.temporal.TemporalUnit unit) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a copy of this date-time with the specified amount added. |
| * <p> |
| * This returns a {@code ZonedDateTime}, based on this one, with the specified amount added. |
| * The amount is typically {@link java.time.Period Period} or {@link java.time.Duration Duration} but may be |
| * any other type implementing the {@link java.time.temporal.TemporalAmount TemporalAmount} interface. |
| * <p> |
| * The calculation is delegated to the amount object by calling |
| * {@link java.time.temporal.TemporalAmount#addTo(java.time.temporal.Temporal) TemporalAmount#addTo(Temporal)}. The amount implementation is free |
| * to implement the addition in any way it wishes, however it typically |
| * calls back to {@link #plus(long,java.time.temporal.TemporalUnit)}. Consult the documentation |
| * of the amount implementation to determine if it can be successfully added. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param amountToAdd the amount to add, not null |
| * @return a {@code ZonedDateTime} based on this date-time with the addition made, not null |
| * @throws java.time.DateTimeException if the addition cannot be made |
| * @throws java.lang.ArithmeticException if numeric overflow occurs |
| */ |
| |
| public java.time.ZonedDateTime plus(java.time.temporal.TemporalAmount amountToAdd) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a copy of this date-time with the specified amount added. |
| * <p> |
| * This returns a {@code ZonedDateTime}, based on this one, with the amount |
| * in terms of the unit added. If it is not possible to add the amount, because the |
| * unit is not supported or for some other reason, an exception is thrown. |
| * <p> |
| * If the field is a {@link java.time.temporal.ChronoUnit ChronoUnit} then the addition is implemented here. |
| * The zone is not part of the calculation and will be unchanged in the result. |
| * The calculation for date and time units differ. |
| * <p> |
| * Date units operate on the local time-line. |
| * The period is first added to the local date-time, then converted back |
| * to a zoned date-time using the zone ID. |
| * The conversion uses {@link #ofLocal(java.time.LocalDateTime,java.time.ZoneId,java.time.ZoneOffset)} |
| * with the offset before the addition. |
| * <p> |
| * Time units operate on the instant time-line. |
| * The period is first added to the local date-time, then converted back to |
| * a zoned date-time using the zone ID. |
| * The conversion uses {@link #ofInstant(java.time.LocalDateTime,java.time.ZoneOffset,java.time.ZoneId)} |
| * with the offset before the addition. |
| * <p> |
| * If the field is not a {@code ChronoUnit}, then the result of this method |
| * is obtained by invoking {@code TemporalUnit.addTo(Temporal, long)} |
| * passing {@code this} as the argument. In this case, the unit determines |
| * whether and how to perform the addition. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param amountToAdd the amount of the unit to add to the result, may be negative |
| * @param unit the unit of the amount to add, not null |
| * @return a {@code ZonedDateTime} based on this date-time with the specified amount added, not null |
| * @throws java.time.DateTimeException if the addition cannot be made |
| * @throws java.time.temporal.UnsupportedTemporalTypeException if the unit is not supported |
| * @throws java.lang.ArithmeticException if numeric overflow occurs |
| */ |
| |
| public java.time.ZonedDateTime plus(long amountToAdd, java.time.temporal.TemporalUnit unit) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a copy of this {@code ZonedDateTime} with the specified number of years added. |
| * <p> |
| * This operates on the local time-line, |
| * {@link java.time.LocalDateTime#plusYears(long) LocalDateTime#plusYears(long)} to the local date-time. |
| * This is then converted back to a {@code ZonedDateTime}, using the zone ID |
| * to obtain the offset. |
| * <p> |
| * When converting back to {@code ZonedDateTime}, if the local date-time is in an overlap, |
| * then the offset will be retained if possible, otherwise the earlier offset will be used. |
| * If in a gap, the local date-time will be adjusted forward by the length of the gap. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param years the years to add, may be negative |
| * @return a {@code ZonedDateTime} based on this date-time with the years added, not null |
| * @throws java.time.DateTimeException if the result exceeds the supported date range |
| */ |
| |
| public java.time.ZonedDateTime plusYears(long years) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a copy of this {@code ZonedDateTime} with the specified number of months added. |
| * <p> |
| * This operates on the local time-line, |
| * {@link java.time.LocalDateTime#plusMonths(long) LocalDateTime#plusMonths(long)} to the local date-time. |
| * This is then converted back to a {@code ZonedDateTime}, using the zone ID |
| * to obtain the offset. |
| * <p> |
| * When converting back to {@code ZonedDateTime}, if the local date-time is in an overlap, |
| * then the offset will be retained if possible, otherwise the earlier offset will be used. |
| * If in a gap, the local date-time will be adjusted forward by the length of the gap. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param months the months to add, may be negative |
| * @return a {@code ZonedDateTime} based on this date-time with the months added, not null |
| * @throws java.time.DateTimeException if the result exceeds the supported date range |
| */ |
| |
| public java.time.ZonedDateTime plusMonths(long months) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a copy of this {@code ZonedDateTime} with the specified number of weeks added. |
| * <p> |
| * This operates on the local time-line, |
| * {@link java.time.LocalDateTime#plusWeeks(long) LocalDateTime#plusWeeks(long)} to the local date-time. |
| * This is then converted back to a {@code ZonedDateTime}, using the zone ID |
| * to obtain the offset. |
| * <p> |
| * When converting back to {@code ZonedDateTime}, if the local date-time is in an overlap, |
| * then the offset will be retained if possible, otherwise the earlier offset will be used. |
| * If in a gap, the local date-time will be adjusted forward by the length of the gap. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param weeks the weeks to add, may be negative |
| * @return a {@code ZonedDateTime} based on this date-time with the weeks added, not null |
| * @throws java.time.DateTimeException if the result exceeds the supported date range |
| */ |
| |
| public java.time.ZonedDateTime plusWeeks(long weeks) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a copy of this {@code ZonedDateTime} with the specified number of days added. |
| * <p> |
| * This operates on the local time-line, |
| * {@link java.time.LocalDateTime#plusDays(long) LocalDateTime#plusDays(long)} to the local date-time. |
| * This is then converted back to a {@code ZonedDateTime}, using the zone ID |
| * to obtain the offset. |
| * <p> |
| * When converting back to {@code ZonedDateTime}, if the local date-time is in an overlap, |
| * then the offset will be retained if possible, otherwise the earlier offset will be used. |
| * If in a gap, the local date-time will be adjusted forward by the length of the gap. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param days the days to add, may be negative |
| * @return a {@code ZonedDateTime} based on this date-time with the days added, not null |
| * @throws java.time.DateTimeException if the result exceeds the supported date range |
| */ |
| |
| public java.time.ZonedDateTime plusDays(long days) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a copy of this {@code ZonedDateTime} with the specified number of hours added. |
| * <p> |
| * This operates on the instant time-line, such that adding one hour will |
| * always be a duration of one hour later. |
| * This may cause the local date-time to change by an amount other than one hour. |
| * Note that this is a different approach to that used by days, months and years, |
| * thus adding one day is not the same as adding 24 hours. |
| * <p> |
| * For example, consider a time-zone where the spring DST cutover means that the |
| * local times 01:00 to 01:59 occur twice changing from offset +02:00 to +01:00. |
| * <ul> |
| * <li>Adding one hour to 00:30+02:00 will result in 01:30+02:00 |
| * <li>Adding one hour to 01:30+02:00 will result in 01:30+01:00 |
| * <li>Adding one hour to 01:30+01:00 will result in 02:30+01:00 |
| * <li>Adding three hours to 00:30+02:00 will result in 02:30+01:00 |
| * </ul> |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param hours the hours to add, may be negative |
| * @return a {@code ZonedDateTime} based on this date-time with the hours added, not null |
| * @throws java.time.DateTimeException if the result exceeds the supported date range |
| */ |
| |
| public java.time.ZonedDateTime plusHours(long hours) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a copy of this {@code ZonedDateTime} with the specified number of minutes added. |
| * <p> |
| * This operates on the instant time-line, such that adding one minute will |
| * always be a duration of one minute later. |
| * This may cause the local date-time to change by an amount other than one minute. |
| * Note that this is a different approach to that used by days, months and years. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param minutes the minutes to add, may be negative |
| * @return a {@code ZonedDateTime} based on this date-time with the minutes added, not null |
| * @throws java.time.DateTimeException if the result exceeds the supported date range |
| */ |
| |
| public java.time.ZonedDateTime plusMinutes(long minutes) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a copy of this {@code ZonedDateTime} with the specified number of seconds added. |
| * <p> |
| * This operates on the instant time-line, such that adding one second will |
| * always be a duration of one second later. |
| * This may cause the local date-time to change by an amount other than one second. |
| * Note that this is a different approach to that used by days, months and years. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param seconds the seconds to add, may be negative |
| * @return a {@code ZonedDateTime} based on this date-time with the seconds added, not null |
| * @throws java.time.DateTimeException if the result exceeds the supported date range |
| */ |
| |
| public java.time.ZonedDateTime plusSeconds(long seconds) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a copy of this {@code ZonedDateTime} with the specified number of nanoseconds added. |
| * <p> |
| * This operates on the instant time-line, such that adding one nano will |
| * always be a duration of one nano later. |
| * This may cause the local date-time to change by an amount other than one nano. |
| * Note that this is a different approach to that used by days, months and years. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param nanos the nanos to add, may be negative |
| * @return a {@code ZonedDateTime} based on this date-time with the nanoseconds added, not null |
| * @throws java.time.DateTimeException if the result exceeds the supported date range |
| */ |
| |
| public java.time.ZonedDateTime plusNanos(long nanos) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a copy of this date-time with the specified amount subtracted. |
| * <p> |
| * This returns a {@code ZonedDateTime}, based on this one, with the specified amount subtracted. |
| * The amount is typically {@link java.time.Period Period} or {@link java.time.Duration Duration} but may be |
| * any other type implementing the {@link java.time.temporal.TemporalAmount TemporalAmount} interface. |
| * <p> |
| * The calculation is delegated to the amount object by calling |
| * {@link java.time.temporal.TemporalAmount#subtractFrom(java.time.temporal.Temporal) TemporalAmount#subtractFrom(Temporal)}. The amount implementation is free |
| * to implement the subtraction in any way it wishes, however it typically |
| * calls back to {@link #minus(long,java.time.temporal.TemporalUnit)}. Consult the documentation |
| * of the amount implementation to determine if it can be successfully subtracted. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param amountToSubtract the amount to subtract, not null |
| * @return a {@code ZonedDateTime} based on this date-time with the subtraction made, not null |
| * @throws java.time.DateTimeException if the subtraction cannot be made |
| * @throws java.lang.ArithmeticException if numeric overflow occurs |
| */ |
| |
| public java.time.ZonedDateTime minus(java.time.temporal.TemporalAmount amountToSubtract) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a copy of this date-time with the specified amount subtracted. |
| * <p> |
| * This returns a {@code ZonedDateTime}, based on this one, with the amount |
| * in terms of the unit subtracted. If it is not possible to subtract the amount, |
| * because the unit is not supported or for some other reason, an exception is thrown. |
| * <p> |
| * The calculation for date and time units differ. |
| * <p> |
| * Date units operate on the local time-line. |
| * The period is first subtracted from the local date-time, then converted back |
| * to a zoned date-time using the zone ID. |
| * The conversion uses {@link #ofLocal(java.time.LocalDateTime,java.time.ZoneId,java.time.ZoneOffset)} |
| * with the offset before the subtraction. |
| * <p> |
| * Time units operate on the instant time-line. |
| * The period is first subtracted from the local date-time, then converted back to |
| * a zoned date-time using the zone ID. |
| * The conversion uses {@link #ofInstant(java.time.LocalDateTime,java.time.ZoneOffset,java.time.ZoneId)} |
| * with the offset before the subtraction. |
| * <p> |
| * This method is equivalent to {@link #plus(long,java.time.temporal.TemporalUnit)} with the amount negated. |
| * See that method for a full description of how addition, and thus subtraction, works. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param amountToSubtract the amount of the unit to subtract from the result, may be negative |
| * @param unit the unit of the amount to subtract, not null |
| * @return a {@code ZonedDateTime} based on this date-time with the specified amount subtracted, not null |
| * @throws java.time.DateTimeException if the subtraction cannot be made |
| * @throws java.time.temporal.UnsupportedTemporalTypeException if the unit is not supported |
| * @throws java.lang.ArithmeticException if numeric overflow occurs |
| */ |
| |
| public java.time.ZonedDateTime minus(long amountToSubtract, java.time.temporal.TemporalUnit unit) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a copy of this {@code ZonedDateTime} with the specified number of years subtracted. |
| * <p> |
| * This operates on the local time-line, |
| * {@link java.time.LocalDateTime#minusYears(long) LocalDateTime#minusYears(long)} to the local date-time. |
| * This is then converted back to a {@code ZonedDateTime}, using the zone ID |
| * to obtain the offset. |
| * <p> |
| * When converting back to {@code ZonedDateTime}, if the local date-time is in an overlap, |
| * then the offset will be retained if possible, otherwise the earlier offset will be used. |
| * If in a gap, the local date-time will be adjusted forward by the length of the gap. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param years the years to subtract, may be negative |
| * @return a {@code ZonedDateTime} based on this date-time with the years subtracted, not null |
| * @throws java.time.DateTimeException if the result exceeds the supported date range |
| */ |
| |
| public java.time.ZonedDateTime minusYears(long years) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a copy of this {@code ZonedDateTime} with the specified number of months subtracted. |
| * <p> |
| * This operates on the local time-line, |
| * {@link java.time.LocalDateTime#minusMonths(long) LocalDateTime#minusMonths(long)} to the local date-time. |
| * This is then converted back to a {@code ZonedDateTime}, using the zone ID |
| * to obtain the offset. |
| * <p> |
| * When converting back to {@code ZonedDateTime}, if the local date-time is in an overlap, |
| * then the offset will be retained if possible, otherwise the earlier offset will be used. |
| * If in a gap, the local date-time will be adjusted forward by the length of the gap. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param months the months to subtract, may be negative |
| * @return a {@code ZonedDateTime} based on this date-time with the months subtracted, not null |
| * @throws java.time.DateTimeException if the result exceeds the supported date range |
| */ |
| |
| public java.time.ZonedDateTime minusMonths(long months) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a copy of this {@code ZonedDateTime} with the specified number of weeks subtracted. |
| * <p> |
| * This operates on the local time-line, |
| * {@link java.time.LocalDateTime#minusWeeks(long) LocalDateTime#minusWeeks(long)} to the local date-time. |
| * This is then converted back to a {@code ZonedDateTime}, using the zone ID |
| * to obtain the offset. |
| * <p> |
| * When converting back to {@code ZonedDateTime}, if the local date-time is in an overlap, |
| * then the offset will be retained if possible, otherwise the earlier offset will be used. |
| * If in a gap, the local date-time will be adjusted forward by the length of the gap. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param weeks the weeks to subtract, may be negative |
| * @return a {@code ZonedDateTime} based on this date-time with the weeks subtracted, not null |
| * @throws java.time.DateTimeException if the result exceeds the supported date range |
| */ |
| |
| public java.time.ZonedDateTime minusWeeks(long weeks) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a copy of this {@code ZonedDateTime} with the specified number of days subtracted. |
| * <p> |
| * This operates on the local time-line, |
| * {@link java.time.LocalDateTime#minusDays(long) LocalDateTime#minusDays(long)} to the local date-time. |
| * This is then converted back to a {@code ZonedDateTime}, using the zone ID |
| * to obtain the offset. |
| * <p> |
| * When converting back to {@code ZonedDateTime}, if the local date-time is in an overlap, |
| * then the offset will be retained if possible, otherwise the earlier offset will be used. |
| * If in a gap, the local date-time will be adjusted forward by the length of the gap. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param days the days to subtract, may be negative |
| * @return a {@code ZonedDateTime} based on this date-time with the days subtracted, not null |
| * @throws java.time.DateTimeException if the result exceeds the supported date range |
| */ |
| |
| public java.time.ZonedDateTime minusDays(long days) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a copy of this {@code ZonedDateTime} with the specified number of hours subtracted. |
| * <p> |
| * This operates on the instant time-line, such that subtracting one hour will |
| * always be a duration of one hour earlier. |
| * This may cause the local date-time to change by an amount other than one hour. |
| * Note that this is a different approach to that used by days, months and years, |
| * thus subtracting one day is not the same as adding 24 hours. |
| * <p> |
| * For example, consider a time-zone where the spring DST cutover means that the |
| * local times 01:00 to 01:59 occur twice changing from offset +02:00 to +01:00. |
| * <ul> |
| * <li>Subtracting one hour from 02:30+01:00 will result in 01:30+02:00 |
| * <li>Subtracting one hour from 01:30+01:00 will result in 01:30+02:00 |
| * <li>Subtracting one hour from 01:30+02:00 will result in 00:30+01:00 |
| * <li>Subtracting three hours from 02:30+01:00 will result in 00:30+02:00 |
| * </ul> |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param hours the hours to subtract, may be negative |
| * @return a {@code ZonedDateTime} based on this date-time with the hours subtracted, not null |
| * @throws java.time.DateTimeException if the result exceeds the supported date range |
| */ |
| |
| public java.time.ZonedDateTime minusHours(long hours) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a copy of this {@code ZonedDateTime} with the specified number of minutes subtracted. |
| * <p> |
| * This operates on the instant time-line, such that subtracting one minute will |
| * always be a duration of one minute earlier. |
| * This may cause the local date-time to change by an amount other than one minute. |
| * Note that this is a different approach to that used by days, months and years. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param minutes the minutes to subtract, may be negative |
| * @return a {@code ZonedDateTime} based on this date-time with the minutes subtracted, not null |
| * @throws java.time.DateTimeException if the result exceeds the supported date range |
| */ |
| |
| public java.time.ZonedDateTime minusMinutes(long minutes) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a copy of this {@code ZonedDateTime} with the specified number of seconds subtracted. |
| * <p> |
| * This operates on the instant time-line, such that subtracting one second will |
| * always be a duration of one second earlier. |
| * This may cause the local date-time to change by an amount other than one second. |
| * Note that this is a different approach to that used by days, months and years. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param seconds the seconds to subtract, may be negative |
| * @return a {@code ZonedDateTime} based on this date-time with the seconds subtracted, not null |
| * @throws java.time.DateTimeException if the result exceeds the supported date range |
| */ |
| |
| public java.time.ZonedDateTime minusSeconds(long seconds) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a copy of this {@code ZonedDateTime} with the specified number of nanoseconds subtracted. |
| * <p> |
| * This operates on the instant time-line, such that subtracting one nano will |
| * always be a duration of one nano earlier. |
| * This may cause the local date-time to change by an amount other than one nano. |
| * Note that this is a different approach to that used by days, months and years. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param nanos the nanos to subtract, may be negative |
| * @return a {@code ZonedDateTime} based on this date-time with the nanoseconds subtracted, not null |
| * @throws java.time.DateTimeException if the result exceeds the supported date range |
| */ |
| |
| public java.time.ZonedDateTime minusNanos(long nanos) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Queries this date-time using the specified query. |
| * <p> |
| * This queries this date-time using the specified query strategy object. |
| * The {@code TemporalQuery} object defines the logic to be used to |
| * obtain the result. Read the documentation of the query to understand |
| * what the result of this method will be. |
| * <p> |
| * The result of this method is obtained by invoking the |
| * {@link java.time.temporal.TemporalQuery#queryFrom(java.time.temporal.TemporalAccessor) TemporalQuery#queryFrom(TemporalAccessor)} method on the |
| * specified query passing {@code this} as the argument. |
| * |
| * @param <R> the type of the result |
| * @param query the query to invoke, not null |
| * @return the query result, null may be returned (defined by the query) |
| * @throws java.time.DateTimeException if unable to query (defined by the query) |
| * @throws java.lang.ArithmeticException if numeric overflow occurs (defined by the query) |
| */ |
| |
| public <R> R query(java.time.temporal.TemporalQuery<R> query) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Calculates the amount of time until another date-time in terms of the specified unit. |
| * <p> |
| * This calculates the amount of time between two {@code ZonedDateTime} |
| * objects in terms of a single {@code TemporalUnit}. |
| * The start and end points are {@code this} and the specified date-time. |
| * The result will be negative if the end is before the start. |
| * For example, the amount in days between two date-times can be calculated |
| * using {@code startDateTime.until(endDateTime, DAYS)}. |
| * <p> |
| * The {@code Temporal} passed to this method is converted to a |
| * {@code ZonedDateTime} using {@link #from(java.time.temporal.TemporalAccessor)}. |
| * If the time-zone differs between the two zoned date-times, the specified |
| * end date-time is normalized to have the same zone as this date-time. |
| * <p> |
| * The calculation returns a whole number, representing the number of |
| * complete units between the two date-times. |
| * For example, the amount in months between 2012-06-15T00:00Z and 2012-08-14T23:59Z |
| * will only be one month as it is one minute short of two months. |
| * <p> |
| * There are two equivalent ways of using this method. |
| * The first is to invoke this method. |
| * The second is to use {@link java.time.temporal.TemporalUnit#between(java.time.temporal.Temporal,java.time.temporal.Temporal) TemporalUnit#between(Temporal, Temporal)}: |
| * <pre> |
| * // these two lines are equivalent |
| * amount = start.until(end, MONTHS); |
| * amount = MONTHS.between(start, end); |
| * </pre> |
| * The choice should be made based on which makes the code more readable. |
| * <p> |
| * The calculation is implemented in this method for {@link java.time.temporal.ChronoUnit ChronoUnit}. |
| * The units {@code NANOS}, {@code MICROS}, {@code MILLIS}, {@code SECONDS}, |
| * {@code MINUTES}, {@code HOURS} and {@code HALF_DAYS}, {@code DAYS}, |
| * {@code WEEKS}, {@code MONTHS}, {@code YEARS}, {@code DECADES}, |
| * {@code CENTURIES}, {@code MILLENNIA} and {@code ERAS} are supported. |
| * Other {@code ChronoUnit} values will throw an exception. |
| * <p> |
| * The calculation for date and time units differ. |
| * <p> |
| * Date units operate on the local time-line, using the local date-time. |
| * For example, the period from noon on day 1 to noon the following day |
| * in days will always be counted as exactly one day, irrespective of whether |
| * there was a daylight savings change or not. |
| * <p> |
| * Time units operate on the instant time-line. |
| * The calculation effectively converts both zoned date-times to instants |
| * and then calculates the period between the instants. |
| * For example, the period from noon on day 1 to noon the following day |
| * in hours may be 23, 24 or 25 hours (or some other amount) depending on |
| * whether there was a daylight savings change or not. |
| * <p> |
| * If the unit is not a {@code ChronoUnit}, then the result of this method |
| * is obtained by invoking {@code TemporalUnit.between(Temporal, Temporal)} |
| * passing {@code this} as the first argument and the converted input temporal |
| * as the second argument. |
| * <p> |
| * This instance is immutable and unaffected by this method call. |
| * |
| * @param endExclusive the end date, exclusive, which is converted to a {@code ZonedDateTime}, not null |
| * @param unit the unit to measure the amount in, not null |
| * @return the amount of time between this date-time and the end date-time |
| * @throws java.time.DateTimeException if the amount cannot be calculated, or the end |
| * temporal cannot be converted to a {@code ZonedDateTime} |
| * @throws java.time.temporal.UnsupportedTemporalTypeException if the unit is not supported |
| * @throws java.lang.ArithmeticException if numeric overflow occurs |
| */ |
| |
| public long until(java.time.temporal.Temporal endExclusive, java.time.temporal.TemporalUnit unit) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Formats this date-time using the specified formatter. |
| * <p> |
| * This date-time will be passed to the formatter to produce a string. |
| * |
| * @param formatter the formatter to use, not null |
| * @return the formatted date-time string, not null |
| * @throws java.time.DateTimeException if an error occurs during printing |
| */ |
| |
| public java.lang.String format(java.time.format.DateTimeFormatter formatter) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Converts this date-time to an {@code OffsetDateTime}. |
| * <p> |
| * This creates an offset date-time using the local date-time and offset. |
| * The zone ID is ignored. |
| * |
| * @return an offset date-time representing the same local date-time and offset, not null |
| */ |
| |
| public java.time.OffsetDateTime toOffsetDateTime() { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Checks if this date-time is equal to another date-time. |
| * <p> |
| * The comparison is based on the offset date-time and the zone. |
| * Only objects of type {@code ZonedDateTime} are compared, other types return false. |
| * |
| * @param obj the object to check, null returns false |
| * @return true if this is equal to the other date-time |
| */ |
| |
| public boolean equals(java.lang.Object obj) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * A hash code for this date-time. |
| * |
| * @return a suitable hash code |
| */ |
| |
| public int hashCode() { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Outputs this date-time as a {@code String}, such as |
| * {@code 2007-12-03T10:15:30+01:00[Europe/Paris]}. |
| * <p> |
| * The format consists of the {@code LocalDateTime} followed by the {@code ZoneOffset}. |
| * If the {@code ZoneId} is not the same as the offset, then the ID is output. |
| * The output is compatible with ISO-8601 if the offset and ID are the same. |
| * |
| * @return a string representation of this date-time, not null |
| */ |
| |
| public java.lang.String toString() { throw new RuntimeException("Stub!"); } |
| } |
| |