| /* |
| * Copyright (c) 1996, 2019, Oracle and/or its affiliates. All rights reserved. |
| * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
| * |
| * This code is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 only, as |
| * published by the Free Software Foundation. Oracle designates this |
| * particular file as subject to the "Classpath" exception as provided |
| * by Oracle in the LICENSE file that accompanied this code. |
| * |
| * This code is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * version 2 for more details (a copy is included in the LICENSE file that |
| * accompanied this code). |
| * |
| * You should have received a copy of the GNU General Public License version |
| * 2 along with this work; if not, write to the Free Software Foundation, |
| * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. |
| * |
| * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA |
| * or visit www.oracle.com if you need additional information or have any |
| * questions. |
| */ |
| |
| /* |
| * Portions Copyright IBM Corporation, 2001. All Rights Reserved. |
| */ |
| |
| |
| package java.math; |
| |
| |
| /** |
| * Immutable, arbitrary-precision signed decimal numbers. A |
| * {@code BigDecimal} consists of an arbitrary precision integer |
| * <i>unscaled value</i> and a 32-bit integer <i>scale</i>. If zero |
| * or positive, the scale is the number of digits to the right of the |
| * decimal point. If negative, the unscaled value of the number is |
| * multiplied by ten to the power of the negation of the scale. The |
| * value of the number represented by the {@code BigDecimal} is |
| * therefore <tt>(unscaledValue × 10<sup>-scale</sup>)</tt>. |
| * |
| * <p>The {@code BigDecimal} class provides operations for |
| * arithmetic, scale manipulation, rounding, comparison, hashing, and |
| * format conversion. The {@link #toString} method provides a |
| * canonical representation of a {@code BigDecimal}. |
| * |
| * <p>The {@code BigDecimal} class gives its user complete control |
| * over rounding behavior. If no rounding mode is specified and the |
| * exact result cannot be represented, an exception is thrown; |
| * otherwise, calculations can be carried out to a chosen precision |
| * and rounding mode by supplying an appropriate {@link java.math.MathContext MathContext} |
| * object to the operation. In either case, eight <em>rounding |
| * modes</em> are provided for the control of rounding. Using the |
| * integer fields in this class (such as {@link #ROUND_HALF_UP}) to |
| * represent rounding mode is largely obsolete; the enumeration values |
| * of the {@code RoundingMode} {@code enum}, (such as {@link java.math.RoundingMode#HALF_UP RoundingMode#HALF_UP}) should be used instead. |
| * |
| * <p>When a {@code MathContext} object is supplied with a precision |
| * setting of 0 (for example, {@link java.math.MathContext#UNLIMITED MathContext#UNLIMITED}), |
| * arithmetic operations are exact, as are the arithmetic methods |
| * which take no {@code MathContext} object. (This is the only |
| * behavior that was supported in releases prior to 5.) As a |
| * corollary of computing the exact result, the rounding mode setting |
| * of a {@code MathContext} object with a precision setting of 0 is |
| * not used and thus irrelevant. In the case of divide, the exact |
| * quotient could have an infinitely long decimal expansion; for |
| * example, 1 divided by 3. If the quotient has a nonterminating |
| * decimal expansion and the operation is specified to return an exact |
| * result, an {@code ArithmeticException} is thrown. Otherwise, the |
| * exact result of the division is returned, as done for other |
| * operations. |
| * |
| * <p>When the precision setting is not 0, the rules of |
| * {@code BigDecimal} arithmetic are broadly compatible with selected |
| * modes of operation of the arithmetic defined in ANSI X3.274-1996 |
| * and ANSI X3.274-1996/AM 1-2000 (section 7.4). Unlike those |
| * standards, {@code BigDecimal} includes many rounding modes, which |
| * were mandatory for division in {@code BigDecimal} releases prior |
| * to 5. Any conflicts between these ANSI standards and the |
| * {@code BigDecimal} specification are resolved in favor of |
| * {@code BigDecimal}. |
| * |
| * <p>Since the same numerical value can have different |
| * representations (with different scales), the rules of arithmetic |
| * and rounding must specify both the numerical result and the scale |
| * used in the result's representation. |
| * |
| * |
| * <p>In general the rounding modes and precision setting determine |
| * how operations return results with a limited number of digits when |
| * the exact result has more digits (perhaps infinitely many in the |
| * case of division) than the number of digits returned. |
| * |
| * First, the |
| * total number of digits to return is specified by the |
| * {@code MathContext}'s {@code precision} setting; this determines |
| * the result's <i>precision</i>. The digit count starts from the |
| * leftmost nonzero digit of the exact result. The rounding mode |
| * determines how any discarded trailing digits affect the returned |
| * result. |
| * |
| * <p>For all arithmetic operators , the operation is carried out as |
| * though an exact intermediate result were first calculated and then |
| * rounded to the number of digits specified by the precision setting |
| * (if necessary), using the selected rounding mode. If the exact |
| * result is not returned, some digit positions of the exact result |
| * are discarded. When rounding increases the magnitude of the |
| * returned result, it is possible for a new digit position to be |
| * created by a carry propagating to a leading {@literal "9"} digit. |
| * For example, rounding the value 999.9 to three digits rounding up |
| * would be numerically equal to one thousand, represented as |
| * 100×10<sup>1</sup>. In such cases, the new {@literal "1"} is |
| * the leading digit position of the returned result. |
| * |
| * <p>Besides a logical exact result, each arithmetic operation has a |
| * preferred scale for representing a result. The preferred |
| * scale for each operation is listed in the table below. |
| * |
| * <table border> |
| * <caption><b>Preferred Scales for Results of Arithmetic Operations |
| * </b></caption> |
| * <tr><th>Operation</th><th>Preferred Scale of Result</th></tr> |
| * <tr><td>Add</td><td>max(addend.scale(), augend.scale())</td> |
| * <tr><td>Subtract</td><td>max(minuend.scale(), subtrahend.scale())</td> |
| * <tr><td>Multiply</td><td>multiplier.scale() + multiplicand.scale()</td> |
| * <tr><td>Divide</td><td>dividend.scale() - divisor.scale()</td> |
| * </table> |
| * |
| * These scales are the ones used by the methods which return exact |
| * arithmetic results; except that an exact divide may have to use a |
| * larger scale since the exact result may have more digits. For |
| * example, {@code 1/32} is {@code 0.03125}. |
| * |
| * <p>Before rounding, the scale of the logical exact intermediate |
| * result is the preferred scale for that operation. If the exact |
| * numerical result cannot be represented in {@code precision} |
| * digits, rounding selects the set of digits to return and the scale |
| * of the result is reduced from the scale of the intermediate result |
| * to the least scale which can represent the {@code precision} |
| * digits actually returned. If the exact result can be represented |
| * with at most {@code precision} digits, the representation |
| * of the result with the scale closest to the preferred scale is |
| * returned. In particular, an exactly representable quotient may be |
| * represented in fewer than {@code precision} digits by removing |
| * trailing zeros and decreasing the scale. For example, rounding to |
| * three digits using the {@linkplain java.math.RoundingMode#FLOOR RoundingMode#FLOOR} |
| * rounding mode, <br> |
| * |
| * {@code 19/100 = 0.19 // integer=19, scale=2} <br> |
| * |
| * but<br> |
| * |
| * {@code 21/110 = 0.190 // integer=190, scale=3} <br> |
| * |
| * <p>Note that for add, subtract, and multiply, the reduction in |
| * scale will equal the number of digit positions of the exact result |
| * which are discarded. If the rounding causes a carry propagation to |
| * create a new high-order digit position, an additional digit of the |
| * result is discarded than when no new digit position is created. |
| * |
| * <p>Other methods may have slightly different rounding semantics. |
| * For example, the result of the {@code pow} method using the |
| * {@linkplain #pow(int,java.math.MathContext) specified algorithm} can |
| * occasionally differ from the rounded mathematical result by more |
| * than one unit in the last place, one <i>{@linkplain #ulp() ulp}</i>. |
| * |
| * <p>Two types of operations are provided for manipulating the scale |
| * of a {@code BigDecimal}: scaling/rounding operations and decimal |
| * point motion operations. Scaling/rounding operations ({@link |
| * #setScale setScale} and {@link #round round}) return a |
| * {@code BigDecimal} whose value is approximately (or exactly) equal |
| * to that of the operand, but whose scale or precision is the |
| * specified value; that is, they increase or decrease the precision |
| * of the stored number with minimal effect on its value. Decimal |
| * point motion operations ({@link #movePointLeft movePointLeft} and |
| * {@link #movePointRight movePointRight}) return a |
| * {@code BigDecimal} created from the operand by moving the decimal |
| * point a specified distance in the specified direction. |
| * |
| * <p>For the sake of brevity and clarity, pseudo-code is used |
| * throughout the descriptions of {@code BigDecimal} methods. The |
| * pseudo-code expression {@code (i + j)} is shorthand for "a |
| * {@code BigDecimal} whose value is that of the {@code BigDecimal} |
| * {@code i} added to that of the {@code BigDecimal} |
| * {@code j}." The pseudo-code expression {@code (i == j)} is |
| * shorthand for "{@code true} if and only if the |
| * {@code BigDecimal} {@code i} represents the same value as the |
| * {@code BigDecimal} {@code j}." Other pseudo-code expressions |
| * are interpreted similarly. Square brackets are used to represent |
| * the particular {@code BigInteger} and scale pair defining a |
| * {@code BigDecimal} value; for example [19, 2] is the |
| * {@code BigDecimal} numerically equal to 0.19 having a scale of 2. |
| * |
| * <p>Note: care should be exercised if {@code BigDecimal} objects |
| * are used as keys in a {@link java.util.SortedMap SortedMap} or |
| * elements in a {@link java.util.SortedSet SortedSet} since |
| * {@code BigDecimal}'s <i>natural ordering</i> is <i>inconsistent |
| * with equals</i>. See {@link java.lang.Comparable Comparable}, {@link |
| * java.util.SortedMap} or {@link java.util.SortedSet} for more |
| * information. |
| * |
| * <p>All methods and constructors for this class throw |
| * {@code NullPointerException} when passed a {@code null} object |
| * reference for any input parameter. |
| * |
| * @see java.math.BigInteger |
| * @see java.math.MathContext |
| * @see java.math.RoundingMode |
| * @see java.util.SortedMap |
| * @see java.util.SortedSet |
| * @author Josh Bloch |
| * @author Mike Cowlishaw |
| * @author Joseph D. Darcy |
| * @author Sergey V. Kuksenko |
| */ |
| |
| @SuppressWarnings({"unchecked", "deprecation", "all"}) |
| public class BigDecimal extends java.lang.Number implements java.lang.Comparable<java.math.BigDecimal> { |
| |
| /** |
| * Translates a character array representation of a |
| * {@code BigDecimal} into a {@code BigDecimal}, accepting the |
| * same sequence of characters as the {@link #BigDecimal(java.lang.String)} |
| * constructor, while allowing a sub-array to be specified. |
| * |
| * <p>Note that if the sequence of characters is already available |
| * within a character array, using this constructor is faster than |
| * converting the {@code char} array to string and using the |
| * {@code BigDecimal(String)} constructor . |
| * |
| * @param in {@code char} array that is the source of characters. |
| * @param offset first character in the array to inspect. |
| * @param len number of characters to consider. |
| * @throws java.lang.NumberFormatException if {@code in} is not a valid |
| * representation of a {@code BigDecimal} or the defined subarray |
| * is not wholly within {@code in}. |
| * @since 1.5 |
| */ |
| |
| public BigDecimal(char[] in, int offset, int len) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Translates a character array representation of a |
| * {@code BigDecimal} into a {@code BigDecimal}, accepting the |
| * same sequence of characters as the {@link #BigDecimal(java.lang.String)} |
| * constructor, while allowing a sub-array to be specified and |
| * with rounding according to the context settings. |
| * |
| * <p>Note that if the sequence of characters is already available |
| * within a character array, using this constructor is faster than |
| * converting the {@code char} array to string and using the |
| * {@code BigDecimal(String)} constructor . |
| * |
| * @param in {@code char} array that is the source of characters. |
| * @param offset first character in the array to inspect. |
| * @param len number of characters to consider.. |
| * @param mc the context to use. |
| * @throws java.lang.ArithmeticException if the result is inexact but the |
| * rounding mode is {@code UNNECESSARY}. |
| * @throws java.lang.NumberFormatException if {@code in} is not a valid |
| * representation of a {@code BigDecimal} or the defined subarray |
| * is not wholly within {@code in}. |
| * @since 1.5 |
| */ |
| |
| public BigDecimal(char[] in, int offset, int len, java.math.MathContext mc) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Translates a character array representation of a |
| * {@code BigDecimal} into a {@code BigDecimal}, accepting the |
| * same sequence of characters as the {@link #BigDecimal(java.lang.String)} |
| * constructor. |
| * |
| * <p>Note that if the sequence of characters is already available |
| * as a character array, using this constructor is faster than |
| * converting the {@code char} array to string and using the |
| * {@code BigDecimal(String)} constructor . |
| * |
| * @param in {@code char} array that is the source of characters. |
| * @throws java.lang.NumberFormatException if {@code in} is not a valid |
| * representation of a {@code BigDecimal}. |
| * @since 1.5 |
| */ |
| |
| public BigDecimal(char[] in) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Translates a character array representation of a |
| * {@code BigDecimal} into a {@code BigDecimal}, accepting the |
| * same sequence of characters as the {@link #BigDecimal(java.lang.String)} |
| * constructor and with rounding according to the context |
| * settings. |
| * |
| * <p>Note that if the sequence of characters is already available |
| * as a character array, using this constructor is faster than |
| * converting the {@code char} array to string and using the |
| * {@code BigDecimal(String)} constructor . |
| * |
| * @param in {@code char} array that is the source of characters. |
| * @param mc the context to use. |
| * @throws java.lang.ArithmeticException if the result is inexact but the |
| * rounding mode is {@code UNNECESSARY}. |
| * @throws java.lang.NumberFormatException if {@code in} is not a valid |
| * representation of a {@code BigDecimal}. |
| * @since 1.5 |
| */ |
| |
| public BigDecimal(char[] in, java.math.MathContext mc) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Translates the string representation of a {@code BigDecimal} |
| * into a {@code BigDecimal}. The string representation consists |
| * of an optional sign, {@code '+'} (<tt> '\u002B'</tt>) or |
| * {@code '-'} (<tt>'\u002D'</tt>), followed by a sequence of |
| * zero or more decimal digits ("the integer"), optionally |
| * followed by a fraction, optionally followed by an exponent. |
| * |
| * <p>The fraction consists of a decimal point followed by zero |
| * or more decimal digits. The string must contain at least one |
| * digit in either the integer or the fraction. The number formed |
| * by the sign, the integer and the fraction is referred to as the |
| * <i>significand</i>. |
| * |
| * <p>The exponent consists of the character {@code 'e'} |
| * (<tt>'\u0065'</tt>) or {@code 'E'} (<tt>'\u0045'</tt>) |
| * followed by one or more decimal digits. The value of the |
| * exponent must lie between -{@link java.lang.Integer#MAX_VALUE Integer#MAX_VALUE} ({@link java.lang.Integer#MIN_VALUE Integer#MIN_VALUE}+1) and {@link java.lang.Integer#MAX_VALUE Integer#MAX_VALUE}, inclusive. |
| * |
| * <p>More formally, the strings this constructor accepts are |
| * described by the following grammar: |
| * <blockquote> |
| * <dl> |
| * <dt><i>BigDecimalString:</i> |
| * <dd><i>Sign<sub>opt</sub> Significand Exponent<sub>opt</sub></i> |
| * <dt><i>Sign:</i> |
| * <dd>{@code +} |
| * <dd>{@code -} |
| * <dt><i>Significand:</i> |
| * <dd><i>IntegerPart</i> {@code .} <i>FractionPart<sub>opt</sub></i> |
| * <dd>{@code .} <i>FractionPart</i> |
| * <dd><i>IntegerPart</i> |
| * <dt><i>IntegerPart:</i> |
| * <dd><i>Digits</i> |
| * <dt><i>FractionPart:</i> |
| * <dd><i>Digits</i> |
| * <dt><i>Exponent:</i> |
| * <dd><i>ExponentIndicator SignedInteger</i> |
| * <dt><i>ExponentIndicator:</i> |
| * <dd>{@code e} |
| * <dd>{@code E} |
| * <dt><i>SignedInteger:</i> |
| * <dd><i>Sign<sub>opt</sub> Digits</i> |
| * <dt><i>Digits:</i> |
| * <dd><i>Digit</i> |
| * <dd><i>Digits Digit</i> |
| * <dt><i>Digit:</i> |
| * <dd>any character for which {@link java.lang.Character#isDigit Character#isDigit} |
| * returns {@code true}, including 0, 1, 2 ... |
| * </dl> |
| * </blockquote> |
| * |
| * <p>The scale of the returned {@code BigDecimal} will be the |
| * number of digits in the fraction, or zero if the string |
| * contains no decimal point, subject to adjustment for any |
| * exponent; if the string contains an exponent, the exponent is |
| * subtracted from the scale. The value of the resulting scale |
| * must lie between {@code Integer.MIN_VALUE} and |
| * {@code Integer.MAX_VALUE}, inclusive. |
| * |
| * <p>The character-to-digit mapping is provided by {@link |
| * java.lang.Character#digit} set to convert to radix 10. The |
| * String may not contain any extraneous characters (whitespace, |
| * for example). |
| * |
| * <p><b>Examples:</b><br> |
| * The value of the returned {@code BigDecimal} is equal to |
| * <i>significand</i> × 10<sup> <i>exponent</i></sup>. |
| * For each string on the left, the resulting representation |
| * [{@code BigInteger}, {@code scale}] is shown on the right. |
| * <pre> |
| * "0" [0,0] |
| * "0.00" [0,2] |
| * "123" [123,0] |
| * "-123" [-123,0] |
| * "1.23E3" [123,-1] |
| * "1.23E+3" [123,-1] |
| * "12.3E+7" [123,-6] |
| * "12.0" [120,1] |
| * "12.3" [123,1] |
| * "0.00123" [123,5] |
| * "-1.23E-12" [-123,14] |
| * "1234.5E-4" [12345,5] |
| * "0E+7" [0,-7] |
| * "-0" [0,0] |
| * </pre> |
| * |
| * <p>Note: For values other than {@code float} and |
| * {@code double} NaN and ±Infinity, this constructor is |
| * compatible with the values returned by {@link java.lang.Float#toString Float#toString} |
| * and {@link java.lang.Double#toString Double#toString}. This is generally the preferred |
| * way to convert a {@code float} or {@code double} into a |
| * BigDecimal, as it doesn't suffer from the unpredictability of |
| * the {@link #BigDecimal(double)} constructor. |
| * |
| * @param val String representation of {@code BigDecimal}. |
| * |
| * @throws java.lang.NumberFormatException if {@code val} is not a valid |
| * representation of a {@code BigDecimal}. |
| */ |
| |
| public BigDecimal(java.lang.String val) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Translates the string representation of a {@code BigDecimal} |
| * into a {@code BigDecimal}, accepting the same strings as the |
| * {@link #BigDecimal(java.lang.String)} constructor, with rounding |
| * according to the context settings. |
| * |
| * @param val string representation of a {@code BigDecimal}. |
| * @param mc the context to use. |
| * @throws java.lang.ArithmeticException if the result is inexact but the |
| * rounding mode is {@code UNNECESSARY}. |
| * @throws java.lang.NumberFormatException if {@code val} is not a valid |
| * representation of a BigDecimal. |
| * @since 1.5 |
| */ |
| |
| public BigDecimal(java.lang.String val, java.math.MathContext mc) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Translates a {@code double} into a {@code BigDecimal} which |
| * is the exact decimal representation of the {@code double}'s |
| * binary floating-point value. The scale of the returned |
| * {@code BigDecimal} is the smallest value such that |
| * <tt>(10<sup>scale</sup> × val)</tt> is an integer. |
| * <p> |
| * <b>Notes:</b> |
| * <ol> |
| * <li> |
| * The results of this constructor can be somewhat unpredictable. |
| * One might assume that writing {@code new BigDecimal(0.1)} in |
| * Java creates a {@code BigDecimal} which is exactly equal to |
| * 0.1 (an unscaled value of 1, with a scale of 1), but it is |
| * actually equal to |
| * 0.1000000000000000055511151231257827021181583404541015625. |
| * This is because 0.1 cannot be represented exactly as a |
| * {@code double} (or, for that matter, as a binary fraction of |
| * any finite length). Thus, the value that is being passed |
| * <i>in</i> to the constructor is not exactly equal to 0.1, |
| * appearances notwithstanding. |
| * |
| * <li> |
| * The {@code String} constructor, on the other hand, is |
| * perfectly predictable: writing {@code new BigDecimal("0.1")} |
| * creates a {@code BigDecimal} which is <i>exactly</i> equal to |
| * 0.1, as one would expect. Therefore, it is generally |
| * recommended that the {@linkplain #BigDecimal(java.lang.String) |
| * <tt>String</tt> constructor} be used in preference to this one. |
| * |
| * <li> |
| * When a {@code double} must be used as a source for a |
| * {@code BigDecimal}, note that this constructor provides an |
| * exact conversion; it does not give the same result as |
| * converting the {@code double} to a {@code String} using the |
| * {@link java.lang.Double#toString(double) Double#toString(double)} method and then using the |
| * {@link #BigDecimal(java.lang.String)} constructor. To get that result, |
| * use the {@code static} {@link #valueOf(double)} method. |
| * </ol> |
| * |
| * @param val {@code double} value to be converted to |
| * {@code BigDecimal}. |
| * @throws java.lang.NumberFormatException if {@code val} is infinite or NaN. |
| */ |
| |
| public BigDecimal(double val) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Translates a {@code double} into a {@code BigDecimal}, with |
| * rounding according to the context settings. The scale of the |
| * {@code BigDecimal} is the smallest value such that |
| * <tt>(10<sup>scale</sup> × val)</tt> is an integer. |
| * |
| * <p>The results of this constructor can be somewhat unpredictable |
| * and its use is generally not recommended; see the notes under |
| * the {@link #BigDecimal(double)} constructor. |
| * |
| * @param val {@code double} value to be converted to |
| * {@code BigDecimal}. |
| * @param mc the context to use. |
| * @throws java.lang.ArithmeticException if the result is inexact but the |
| * RoundingMode is UNNECESSARY. |
| * @throws java.lang.NumberFormatException if {@code val} is infinite or NaN. |
| * @since 1.5 |
| */ |
| |
| public BigDecimal(double val, java.math.MathContext mc) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Translates a {@code BigInteger} into a {@code BigDecimal}. |
| * The scale of the {@code BigDecimal} is zero. |
| * |
| * @param val {@code BigInteger} value to be converted to |
| * {@code BigDecimal}. |
| */ |
| |
| public BigDecimal(java.math.BigInteger val) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Translates a {@code BigInteger} into a {@code BigDecimal} |
| * rounding according to the context settings. The scale of the |
| * {@code BigDecimal} is zero. |
| * |
| * @param val {@code BigInteger} value to be converted to |
| * {@code BigDecimal}. |
| * @param mc the context to use. |
| * @throws java.lang.ArithmeticException if the result is inexact but the |
| * rounding mode is {@code UNNECESSARY}. |
| * @since 1.5 |
| */ |
| |
| public BigDecimal(java.math.BigInteger val, java.math.MathContext mc) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Translates a {@code BigInteger} unscaled value and an |
| * {@code int} scale into a {@code BigDecimal}. The value of |
| * the {@code BigDecimal} is |
| * <tt>(unscaledVal × 10<sup>-scale</sup>)</tt>. |
| * |
| * @param unscaledVal unscaled value of the {@code BigDecimal}. |
| * @param scale scale of the {@code BigDecimal}. |
| */ |
| |
| public BigDecimal(java.math.BigInteger unscaledVal, int scale) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Translates a {@code BigInteger} unscaled value and an |
| * {@code int} scale into a {@code BigDecimal}, with rounding |
| * according to the context settings. The value of the |
| * {@code BigDecimal} is <tt>(unscaledVal × |
| * 10<sup>-scale</sup>)</tt>, rounded according to the |
| * {@code precision} and rounding mode settings. |
| * |
| * @param unscaledVal unscaled value of the {@code BigDecimal}. |
| * @param scale scale of the {@code BigDecimal}. |
| * @param mc the context to use. |
| * @throws java.lang.ArithmeticException if the result is inexact but the |
| * rounding mode is {@code UNNECESSARY}. |
| * @since 1.5 |
| */ |
| |
| public BigDecimal(java.math.BigInteger unscaledVal, int scale, java.math.MathContext mc) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Translates an {@code int} into a {@code BigDecimal}. The |
| * scale of the {@code BigDecimal} is zero. |
| * |
| * @param val {@code int} value to be converted to |
| * {@code BigDecimal}. |
| * @since 1.5 |
| */ |
| |
| public BigDecimal(int val) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Translates an {@code int} into a {@code BigDecimal}, with |
| * rounding according to the context settings. The scale of the |
| * {@code BigDecimal}, before any rounding, is zero. |
| * |
| * @param val {@code int} value to be converted to {@code BigDecimal}. |
| * @param mc the context to use. |
| * @throws java.lang.ArithmeticException if the result is inexact but the |
| * rounding mode is {@code UNNECESSARY}. |
| * @since 1.5 |
| */ |
| |
| public BigDecimal(int val, java.math.MathContext mc) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Translates a {@code long} into a {@code BigDecimal}. The |
| * scale of the {@code BigDecimal} is zero. |
| * |
| * @param val {@code long} value to be converted to {@code BigDecimal}. |
| * @since 1.5 |
| */ |
| |
| public BigDecimal(long val) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Translates a {@code long} into a {@code BigDecimal}, with |
| * rounding according to the context settings. The scale of the |
| * {@code BigDecimal}, before any rounding, is zero. |
| * |
| * @param val {@code long} value to be converted to {@code BigDecimal}. |
| * @param mc the context to use. |
| * @throws java.lang.ArithmeticException if the result is inexact but the |
| * rounding mode is {@code UNNECESSARY}. |
| * @since 1.5 |
| */ |
| |
| public BigDecimal(long val, java.math.MathContext mc) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Translates a {@code long} unscaled value and an |
| * {@code int} scale into a {@code BigDecimal}. This |
| * {@literal "static factory method"} is provided in preference to |
| * a ({@code long}, {@code int}) constructor because it |
| * allows for reuse of frequently used {@code BigDecimal} values.. |
| * |
| * @param unscaledVal unscaled value of the {@code BigDecimal}. |
| * @param scale scale of the {@code BigDecimal}. |
| * @return a {@code BigDecimal} whose value is |
| * <tt>(unscaledVal × 10<sup>-scale</sup>)</tt>. |
| */ |
| |
| public static java.math.BigDecimal valueOf(long unscaledVal, int scale) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Translates a {@code long} value into a {@code BigDecimal} |
| * with a scale of zero. This {@literal "static factory method"} |
| * is provided in preference to a ({@code long}) constructor |
| * because it allows for reuse of frequently used |
| * {@code BigDecimal} values. |
| * |
| * @param val value of the {@code BigDecimal}. |
| * @return a {@code BigDecimal} whose value is {@code val}. |
| */ |
| |
| public static java.math.BigDecimal valueOf(long val) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Translates a {@code double} into a {@code BigDecimal}, using |
| * the {@code double}'s canonical string representation provided |
| * by the {@link java.lang.Double#toString(double) Double#toString(double)} method. |
| * |
| * <p><b>Note:</b> This is generally the preferred way to convert |
| * a {@code double} (or {@code float}) into a |
| * {@code BigDecimal}, as the value returned is equal to that |
| * resulting from constructing a {@code BigDecimal} from the |
| * result of using {@link java.lang.Double#toString(double) Double#toString(double)}. |
| * |
| * @param val {@code double} to convert to a {@code BigDecimal}. |
| * @return a {@code BigDecimal} whose value is equal to or approximately |
| * equal to the value of {@code val}. |
| * @throws java.lang.NumberFormatException if {@code val} is infinite or NaN. |
| * @since 1.5 |
| */ |
| |
| public static java.math.BigDecimal valueOf(double val) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a {@code BigDecimal} whose value is {@code (this + |
| * augend)}, and whose scale is {@code max(this.scale(), |
| * augend.scale())}. |
| * |
| * @param augend value to be added to this {@code BigDecimal}. |
| * @return {@code this + augend} |
| */ |
| |
| public java.math.BigDecimal add(java.math.BigDecimal augend) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a {@code BigDecimal} whose value is {@code (this + augend)}, |
| * with rounding according to the context settings. |
| * |
| * If either number is zero and the precision setting is nonzero then |
| * the other number, rounded if necessary, is used as the result. |
| * |
| * @param augend value to be added to this {@code BigDecimal}. |
| * @param mc the context to use. |
| * @return {@code this + augend}, rounded as necessary. |
| * @throws java.lang.ArithmeticException if the result is inexact but the |
| * rounding mode is {@code UNNECESSARY}. |
| * @since 1.5 |
| */ |
| |
| public java.math.BigDecimal add(java.math.BigDecimal augend, java.math.MathContext mc) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a {@code BigDecimal} whose value is {@code (this - |
| * subtrahend)}, and whose scale is {@code max(this.scale(), |
| * subtrahend.scale())}. |
| * |
| * @param subtrahend value to be subtracted from this {@code BigDecimal}. |
| * @return {@code this - subtrahend} |
| */ |
| |
| public java.math.BigDecimal subtract(java.math.BigDecimal subtrahend) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a {@code BigDecimal} whose value is {@code (this - subtrahend)}, |
| * with rounding according to the context settings. |
| * |
| * If {@code subtrahend} is zero then this, rounded if necessary, is used as the |
| * result. If this is zero then the result is {@code subtrahend.negate(mc)}. |
| * |
| * @param subtrahend value to be subtracted from this {@code BigDecimal}. |
| * @param mc the context to use. |
| * @return {@code this - subtrahend}, rounded as necessary. |
| * @throws java.lang.ArithmeticException if the result is inexact but the |
| * rounding mode is {@code UNNECESSARY}. |
| * @since 1.5 |
| */ |
| |
| public java.math.BigDecimal subtract(java.math.BigDecimal subtrahend, java.math.MathContext mc) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a {@code BigDecimal} whose value is <tt>(this × |
| * multiplicand)</tt>, and whose scale is {@code (this.scale() + |
| * multiplicand.scale())}. |
| * |
| * @param multiplicand value to be multiplied by this {@code BigDecimal}. |
| * @return {@code this * multiplicand} |
| */ |
| |
| public java.math.BigDecimal multiply(java.math.BigDecimal multiplicand) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a {@code BigDecimal} whose value is <tt>(this × |
| * multiplicand)</tt>, with rounding according to the context settings. |
| * |
| * @param multiplicand value to be multiplied by this {@code BigDecimal}. |
| * @param mc the context to use. |
| * @return {@code this * multiplicand}, rounded as necessary. |
| * @throws java.lang.ArithmeticException if the result is inexact but the |
| * rounding mode is {@code UNNECESSARY}. |
| * @since 1.5 |
| */ |
| |
| public java.math.BigDecimal multiply(java.math.BigDecimal multiplicand, java.math.MathContext mc) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a {@code BigDecimal} whose value is {@code (this / |
| * divisor)}, and whose scale is as specified. If rounding must |
| * be performed to generate a result with the specified scale, the |
| * specified rounding mode is applied. |
| * |
| * <p>The new {@link #divide(java.math.BigDecimal,int,java.math.RoundingMode)} method |
| * should be used in preference to this legacy method. |
| * |
| * @param divisor value by which this {@code BigDecimal} is to be divided. |
| * @param scale scale of the {@code BigDecimal} quotient to be returned. |
| * @param roundingMode rounding mode to apply. |
| * @return {@code this / divisor} |
| * @throws java.lang.ArithmeticException if {@code divisor} is zero, |
| * {@code roundingMode==ROUND_UNNECESSARY} and |
| * the specified scale is insufficient to represent the result |
| * of the division exactly. |
| * @throws java.lang.IllegalArgumentException if {@code roundingMode} does not |
| * represent a valid rounding mode. |
| * @see #ROUND_UP |
| * @see #ROUND_DOWN |
| * @see #ROUND_CEILING |
| * @see #ROUND_FLOOR |
| * @see #ROUND_HALF_UP |
| * @see #ROUND_HALF_DOWN |
| * @see #ROUND_HALF_EVEN |
| * @see #ROUND_UNNECESSARY |
| */ |
| |
| public java.math.BigDecimal divide(java.math.BigDecimal divisor, int scale, int roundingMode) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a {@code BigDecimal} whose value is {@code (this / |
| * divisor)}, and whose scale is as specified. If rounding must |
| * be performed to generate a result with the specified scale, the |
| * specified rounding mode is applied. |
| * |
| * @param divisor value by which this {@code BigDecimal} is to be divided. |
| * @param scale scale of the {@code BigDecimal} quotient to be returned. |
| * @param roundingMode rounding mode to apply. |
| * @return {@code this / divisor} |
| * @throws java.lang.ArithmeticException if {@code divisor} is zero, |
| * {@code roundingMode==RoundingMode.UNNECESSARY} and |
| * the specified scale is insufficient to represent the result |
| * of the division exactly. |
| * @since 1.5 |
| */ |
| |
| public java.math.BigDecimal divide(java.math.BigDecimal divisor, int scale, java.math.RoundingMode roundingMode) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a {@code BigDecimal} whose value is {@code (this / |
| * divisor)}, and whose scale is {@code this.scale()}. If |
| * rounding must be performed to generate a result with the given |
| * scale, the specified rounding mode is applied. |
| * |
| * <p>The new {@link #divide(java.math.BigDecimal,java.math.RoundingMode)} method |
| * should be used in preference to this legacy method. |
| * |
| * @param divisor value by which this {@code BigDecimal} is to be divided. |
| * @param roundingMode rounding mode to apply. |
| * @return {@code this / divisor} |
| * @throws java.lang.ArithmeticException if {@code divisor==0}, or |
| * {@code roundingMode==ROUND_UNNECESSARY} and |
| * {@code this.scale()} is insufficient to represent the result |
| * of the division exactly. |
| * @throws java.lang.IllegalArgumentException if {@code roundingMode} does not |
| * represent a valid rounding mode. |
| * @see #ROUND_UP |
| * @see #ROUND_DOWN |
| * @see #ROUND_CEILING |
| * @see #ROUND_FLOOR |
| * @see #ROUND_HALF_UP |
| * @see #ROUND_HALF_DOWN |
| * @see #ROUND_HALF_EVEN |
| * @see #ROUND_UNNECESSARY |
| */ |
| |
| public java.math.BigDecimal divide(java.math.BigDecimal divisor, int roundingMode) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a {@code BigDecimal} whose value is {@code (this / |
| * divisor)}, and whose scale is {@code this.scale()}. If |
| * rounding must be performed to generate a result with the given |
| * scale, the specified rounding mode is applied. |
| * |
| * @param divisor value by which this {@code BigDecimal} is to be divided. |
| * @param roundingMode rounding mode to apply. |
| * @return {@code this / divisor} |
| * @throws java.lang.ArithmeticException if {@code divisor==0}, or |
| * {@code roundingMode==RoundingMode.UNNECESSARY} and |
| * {@code this.scale()} is insufficient to represent the result |
| * of the division exactly. |
| * @since 1.5 |
| */ |
| |
| public java.math.BigDecimal divide(java.math.BigDecimal divisor, java.math.RoundingMode roundingMode) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a {@code BigDecimal} whose value is {@code (this / |
| * divisor)}, and whose preferred scale is {@code (this.scale() - |
| * divisor.scale())}; if the exact quotient cannot be |
| * represented (because it has a non-terminating decimal |
| * expansion) an {@code ArithmeticException} is thrown. |
| * |
| * @param divisor value by which this {@code BigDecimal} is to be divided. |
| * @throws java.lang.ArithmeticException if the exact quotient does not have a |
| * terminating decimal expansion |
| * @return {@code this / divisor} |
| * @since 1.5 |
| * @author Joseph D. Darcy |
| */ |
| |
| public java.math.BigDecimal divide(java.math.BigDecimal divisor) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a {@code BigDecimal} whose value is {@code (this / |
| * divisor)}, with rounding according to the context settings. |
| * |
| * @param divisor value by which this {@code BigDecimal} is to be divided. |
| * @param mc the context to use. |
| * @return {@code this / divisor}, rounded as necessary. |
| * @throws java.lang.ArithmeticException if the result is inexact but the |
| * rounding mode is {@code UNNECESSARY} or |
| * {@code mc.precision == 0} and the quotient has a |
| * non-terminating decimal expansion. |
| * @since 1.5 |
| */ |
| |
| public java.math.BigDecimal divide(java.math.BigDecimal divisor, java.math.MathContext mc) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a {@code BigDecimal} whose value is the integer part |
| * of the quotient {@code (this / divisor)} rounded down. The |
| * preferred scale of the result is {@code (this.scale() - |
| * divisor.scale())}. |
| * |
| * @param divisor value by which this {@code BigDecimal} is to be divided. |
| * @return The integer part of {@code this / divisor}. |
| * @throws java.lang.ArithmeticException if {@code divisor==0} |
| * @since 1.5 |
| */ |
| |
| public java.math.BigDecimal divideToIntegralValue(java.math.BigDecimal divisor) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a {@code BigDecimal} whose value is the integer part |
| * of {@code (this / divisor)}. Since the integer part of the |
| * exact quotient does not depend on the rounding mode, the |
| * rounding mode does not affect the values returned by this |
| * method. The preferred scale of the result is |
| * {@code (this.scale() - divisor.scale())}. An |
| * {@code ArithmeticException} is thrown if the integer part of |
| * the exact quotient needs more than {@code mc.precision} |
| * digits. |
| * |
| * @param divisor value by which this {@code BigDecimal} is to be divided. |
| * @param mc the context to use. |
| * @return The integer part of {@code this / divisor}. |
| * @throws java.lang.ArithmeticException if {@code divisor==0} |
| * @throws java.lang.ArithmeticException if {@code mc.precision} {@literal >} 0 and the result |
| * requires a precision of more than {@code mc.precision} digits. |
| * @since 1.5 |
| * @author Joseph D. Darcy |
| */ |
| |
| public java.math.BigDecimal divideToIntegralValue(java.math.BigDecimal divisor, java.math.MathContext mc) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a {@code BigDecimal} whose value is {@code (this % divisor)}. |
| * |
| * <p>The remainder is given by |
| * {@code this.subtract(this.divideToIntegralValue(divisor).multiply(divisor))}. |
| * Note that this is not the modulo operation (the result can be |
| * negative). |
| * |
| * @param divisor value by which this {@code BigDecimal} is to be divided. |
| * @return {@code this % divisor}. |
| * @throws java.lang.ArithmeticException if {@code divisor==0} |
| * @since 1.5 |
| */ |
| |
| public java.math.BigDecimal remainder(java.math.BigDecimal divisor) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a {@code BigDecimal} whose value is {@code (this % |
| * divisor)}, with rounding according to the context settings. |
| * The {@code MathContext} settings affect the implicit divide |
| * used to compute the remainder. The remainder computation |
| * itself is by definition exact. Therefore, the remainder may |
| * contain more than {@code mc.getPrecision()} digits. |
| * |
| * <p>The remainder is given by |
| * {@code this.subtract(this.divideToIntegralValue(divisor, |
| * mc).multiply(divisor))}. Note that this is not the modulo |
| * operation (the result can be negative). |
| * |
| * @param divisor value by which this {@code BigDecimal} is to be divided. |
| * @param mc the context to use. |
| * @return {@code this % divisor}, rounded as necessary. |
| * @throws java.lang.ArithmeticException if {@code divisor==0} |
| * @throws java.lang.ArithmeticException if the result is inexact but the |
| * rounding mode is {@code UNNECESSARY}, or {@code mc.precision} |
| * {@literal >} 0 and the result of {@code this.divideToIntgralValue(divisor)} would |
| * require a precision of more than {@code mc.precision} digits. |
| * @see #divideToIntegralValue(java.math.BigDecimal, java.math.MathContext) |
| * @since 1.5 |
| */ |
| |
| public java.math.BigDecimal remainder(java.math.BigDecimal divisor, java.math.MathContext mc) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a two-element {@code BigDecimal} array containing the |
| * result of {@code divideToIntegralValue} followed by the result of |
| * {@code remainder} on the two operands. |
| * |
| * <p>Note that if both the integer quotient and remainder are |
| * needed, this method is faster than using the |
| * {@code divideToIntegralValue} and {@code remainder} methods |
| * separately because the division need only be carried out once. |
| * |
| * @param divisor value by which this {@code BigDecimal} is to be divided, |
| * and the remainder computed. |
| * @return a two element {@code BigDecimal} array: the quotient |
| * (the result of {@code divideToIntegralValue}) is the initial element |
| * and the remainder is the final element. |
| * @throws java.lang.ArithmeticException if {@code divisor==0} |
| * @see #divideToIntegralValue(java.math.BigDecimal, java.math.MathContext) |
| * @see #remainder(java.math.BigDecimal, java.math.MathContext) |
| * @since 1.5 |
| */ |
| |
| public java.math.BigDecimal[] divideAndRemainder(java.math.BigDecimal divisor) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a two-element {@code BigDecimal} array containing the |
| * result of {@code divideToIntegralValue} followed by the result of |
| * {@code remainder} on the two operands calculated with rounding |
| * according to the context settings. |
| * |
| * <p>Note that if both the integer quotient and remainder are |
| * needed, this method is faster than using the |
| * {@code divideToIntegralValue} and {@code remainder} methods |
| * separately because the division need only be carried out once. |
| * |
| * @param divisor value by which this {@code BigDecimal} is to be divided, |
| * and the remainder computed. |
| * @param mc the context to use. |
| * @return a two element {@code BigDecimal} array: the quotient |
| * (the result of {@code divideToIntegralValue}) is the |
| * initial element and the remainder is the final element. |
| * @throws java.lang.ArithmeticException if {@code divisor==0} |
| * @throws java.lang.ArithmeticException if the result is inexact but the |
| * rounding mode is {@code UNNECESSARY}, or {@code mc.precision} |
| * {@literal >} 0 and the result of {@code this.divideToIntgralValue(divisor)} would |
| * require a precision of more than {@code mc.precision} digits. |
| * @see #divideToIntegralValue(java.math.BigDecimal, java.math.MathContext) |
| * @see #remainder(java.math.BigDecimal, java.math.MathContext) |
| * @since 1.5 |
| */ |
| |
| public java.math.BigDecimal[] divideAndRemainder(java.math.BigDecimal divisor, java.math.MathContext mc) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a {@code BigDecimal} whose value is |
| * <tt>(this<sup>n</sup>)</tt>, The power is computed exactly, to |
| * unlimited precision. |
| * |
| * <p>The parameter {@code n} must be in the range 0 through |
| * 999999999, inclusive. {@code ZERO.pow(0)} returns {@link |
| * #ONE}. |
| * |
| * Note that future releases may expand the allowable exponent |
| * range of this method. |
| * |
| * @param n power to raise this {@code BigDecimal} to. |
| * @return <tt>this<sup>n</sup></tt> |
| * @throws java.lang.ArithmeticException if {@code n} is out of range. |
| * @since 1.5 |
| */ |
| |
| public java.math.BigDecimal pow(int n) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a {@code BigDecimal} whose value is |
| * <tt>(this<sup>n</sup>)</tt>. The current implementation uses |
| * the core algorithm defined in ANSI standard X3.274-1996 with |
| * rounding according to the context settings. In general, the |
| * returned numerical value is within two ulps of the exact |
| * numerical value for the chosen precision. Note that future |
| * releases may use a different algorithm with a decreased |
| * allowable error bound and increased allowable exponent range. |
| * |
| * <p>The X3.274-1996 algorithm is: |
| * |
| * <ul> |
| * <li> An {@code ArithmeticException} exception is thrown if |
| * <ul> |
| * <li>{@code abs(n) > 999999999} |
| * <li>{@code mc.precision == 0} and {@code n < 0} |
| * <li>{@code mc.precision > 0} and {@code n} has more than |
| * {@code mc.precision} decimal digits |
| * </ul> |
| * |
| * <li> if {@code n} is zero, {@link #ONE} is returned even if |
| * {@code this} is zero, otherwise |
| * <ul> |
| * <li> if {@code n} is positive, the result is calculated via |
| * the repeated squaring technique into a single accumulator. |
| * The individual multiplications with the accumulator use the |
| * same math context settings as in {@code mc} except for a |
| * precision increased to {@code mc.precision + elength + 1} |
| * where {@code elength} is the number of decimal digits in |
| * {@code n}. |
| * |
| * <li> if {@code n} is negative, the result is calculated as if |
| * {@code n} were positive; this value is then divided into one |
| * using the working precision specified above. |
| * |
| * <li> The final value from either the positive or negative case |
| * is then rounded to the destination precision. |
| * </ul> |
| * </ul> |
| * |
| * @param n power to raise this {@code BigDecimal} to. |
| * @param mc the context to use. |
| * @return <tt>this<sup>n</sup></tt> using the ANSI standard X3.274-1996 |
| * algorithm |
| * @throws java.lang.ArithmeticException if the result is inexact but the |
| * rounding mode is {@code UNNECESSARY}, or {@code n} is out |
| * of range. |
| * @since 1.5 |
| */ |
| |
| public java.math.BigDecimal pow(int n, java.math.MathContext mc) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a {@code BigDecimal} whose value is the absolute value |
| * of this {@code BigDecimal}, and whose scale is |
| * {@code this.scale()}. |
| * |
| * @return {@code abs(this)} |
| */ |
| |
| public java.math.BigDecimal abs() { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a {@code BigDecimal} whose value is the absolute value |
| * of this {@code BigDecimal}, with rounding according to the |
| * context settings. |
| * |
| * @param mc the context to use. |
| * @return {@code abs(this)}, rounded as necessary. |
| * @throws java.lang.ArithmeticException if the result is inexact but the |
| * rounding mode is {@code UNNECESSARY}. |
| * @since 1.5 |
| */ |
| |
| public java.math.BigDecimal abs(java.math.MathContext mc) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a {@code BigDecimal} whose value is {@code (-this)}, |
| * and whose scale is {@code this.scale()}. |
| * |
| * @return {@code -this}. |
| */ |
| |
| public java.math.BigDecimal negate() { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a {@code BigDecimal} whose value is {@code (-this)}, |
| * with rounding according to the context settings. |
| * |
| * @param mc the context to use. |
| * @return {@code -this}, rounded as necessary. |
| * @throws java.lang.ArithmeticException if the result is inexact but the |
| * rounding mode is {@code UNNECESSARY}. |
| * @since 1.5 |
| */ |
| |
| public java.math.BigDecimal negate(java.math.MathContext mc) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a {@code BigDecimal} whose value is {@code (+this)}, and whose |
| * scale is {@code this.scale()}. |
| * |
| * <p>This method, which simply returns this {@code BigDecimal} |
| * is included for symmetry with the unary minus method {@link |
| * #negate()}. |
| * |
| * @return {@code this}. |
| * @see #negate() |
| * @since 1.5 |
| */ |
| |
| public java.math.BigDecimal plus() { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a {@code BigDecimal} whose value is {@code (+this)}, |
| * with rounding according to the context settings. |
| * |
| * <p>The effect of this method is identical to that of the {@link |
| * #round(java.math.MathContext)} method. |
| * |
| * @param mc the context to use. |
| * @return {@code this}, rounded as necessary. A zero result will |
| * have a scale of 0. |
| * @throws java.lang.ArithmeticException if the result is inexact but the |
| * rounding mode is {@code UNNECESSARY}. |
| * @see #round(MathContext) |
| * @since 1.5 |
| */ |
| |
| public java.math.BigDecimal plus(java.math.MathContext mc) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns the signum function of this {@code BigDecimal}. |
| * |
| * @return -1, 0, or 1 as the value of this {@code BigDecimal} |
| * is negative, zero, or positive. |
| */ |
| |
| public int signum() { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns the <i>scale</i> of this {@code BigDecimal}. If zero |
| * or positive, the scale is the number of digits to the right of |
| * the decimal point. If negative, the unscaled value of the |
| * number is multiplied by ten to the power of the negation of the |
| * scale. For example, a scale of {@code -3} means the unscaled |
| * value is multiplied by 1000. |
| * |
| * @return the scale of this {@code BigDecimal}. |
| */ |
| |
| public int scale() { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns the <i>precision</i> of this {@code BigDecimal}. (The |
| * precision is the number of digits in the unscaled value.) |
| * |
| * <p>The precision of a zero value is 1. |
| * |
| * @return the precision of this {@code BigDecimal}. |
| * @since 1.5 |
| */ |
| |
| public int precision() { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a {@code BigInteger} whose value is the <i>unscaled |
| * value</i> of this {@code BigDecimal}. (Computes <tt>(this * |
| * 10<sup>this.scale()</sup>)</tt>.) |
| * |
| * @return the unscaled value of this {@code BigDecimal}. |
| * @since 1.2 |
| */ |
| |
| public java.math.BigInteger unscaledValue() { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a {@code BigDecimal} rounded according to the |
| * {@code MathContext} settings. If the precision setting is 0 then |
| * no rounding takes place. |
| * |
| * <p>The effect of this method is identical to that of the |
| * {@link #plus(java.math.MathContext)} method. |
| * |
| * @param mc the context to use. |
| * @return a {@code BigDecimal} rounded according to the |
| * {@code MathContext} settings. |
| * @throws java.lang.ArithmeticException if the rounding mode is |
| * {@code UNNECESSARY} and the |
| * {@code BigDecimal} operation would require rounding. |
| * @see #plus(MathContext) |
| * @since 1.5 |
| */ |
| |
| public java.math.BigDecimal round(java.math.MathContext mc) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a {@code BigDecimal} whose scale is the specified |
| * value, and whose unscaled value is determined by multiplying or |
| * dividing this {@code BigDecimal}'s unscaled value by the |
| * appropriate power of ten to maintain its overall value. If the |
| * scale is reduced by the operation, the unscaled value must be |
| * divided (rather than multiplied), and the value may be changed; |
| * in this case, the specified rounding mode is applied to the |
| * division. |
| * |
| * <p>Note that since BigDecimal objects are immutable, calls of |
| * this method do <i>not</i> result in the original object being |
| * modified, contrary to the usual convention of having methods |
| * named <tt>set<i>X</i></tt> mutate field <i>{@code X}</i>. |
| * Instead, {@code setScale} returns an object with the proper |
| * scale; the returned object may or may not be newly allocated. |
| * |
| * @param newScale scale of the {@code BigDecimal} value to be returned. |
| * @param roundingMode The rounding mode to apply. |
| * @return a {@code BigDecimal} whose scale is the specified value, |
| * and whose unscaled value is determined by multiplying or |
| * dividing this {@code BigDecimal}'s unscaled value by the |
| * appropriate power of ten to maintain its overall value. |
| * @throws java.lang.ArithmeticException if {@code roundingMode==UNNECESSARY} |
| * and the specified scaling operation would require |
| * rounding. |
| * @see java.math.RoundingMode |
| * @since 1.5 |
| */ |
| |
| public java.math.BigDecimal setScale(int newScale, java.math.RoundingMode roundingMode) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a {@code BigDecimal} whose scale is the specified |
| * value, and whose unscaled value is determined by multiplying or |
| * dividing this {@code BigDecimal}'s unscaled value by the |
| * appropriate power of ten to maintain its overall value. If the |
| * scale is reduced by the operation, the unscaled value must be |
| * divided (rather than multiplied), and the value may be changed; |
| * in this case, the specified rounding mode is applied to the |
| * division. |
| * |
| * <p>Note that since BigDecimal objects are immutable, calls of |
| * this method do <i>not</i> result in the original object being |
| * modified, contrary to the usual convention of having methods |
| * named <tt>set<i>X</i></tt> mutate field <i>{@code X}</i>. |
| * Instead, {@code setScale} returns an object with the proper |
| * scale; the returned object may or may not be newly allocated. |
| * |
| * <p>The new {@link #setScale(int,java.math.RoundingMode)} method should |
| * be used in preference to this legacy method. |
| * |
| * @param newScale scale of the {@code BigDecimal} value to be returned. |
| * @param roundingMode The rounding mode to apply. |
| * @return a {@code BigDecimal} whose scale is the specified value, |
| * and whose unscaled value is determined by multiplying or |
| * dividing this {@code BigDecimal}'s unscaled value by the |
| * appropriate power of ten to maintain its overall value. |
| * @throws java.lang.ArithmeticException if {@code roundingMode==ROUND_UNNECESSARY} |
| * and the specified scaling operation would require |
| * rounding. |
| * @throws java.lang.IllegalArgumentException if {@code roundingMode} does not |
| * represent a valid rounding mode. |
| * @see #ROUND_UP |
| * @see #ROUND_DOWN |
| * @see #ROUND_CEILING |
| * @see #ROUND_FLOOR |
| * @see #ROUND_HALF_UP |
| * @see #ROUND_HALF_DOWN |
| * @see #ROUND_HALF_EVEN |
| * @see #ROUND_UNNECESSARY |
| */ |
| |
| public java.math.BigDecimal setScale(int newScale, int roundingMode) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a {@code BigDecimal} whose scale is the specified |
| * value, and whose value is numerically equal to this |
| * {@code BigDecimal}'s. Throws an {@code ArithmeticException} |
| * if this is not possible. |
| * |
| * <p>This call is typically used to increase the scale, in which |
| * case it is guaranteed that there exists a {@code BigDecimal} |
| * of the specified scale and the correct value. The call can |
| * also be used to reduce the scale if the caller knows that the |
| * {@code BigDecimal} has sufficiently many zeros at the end of |
| * its fractional part (i.e., factors of ten in its integer value) |
| * to allow for the rescaling without changing its value. |
| * |
| * <p>This method returns the same result as the two-argument |
| * versions of {@code setScale}, but saves the caller the trouble |
| * of specifying a rounding mode in cases where it is irrelevant. |
| * |
| * <p>Note that since {@code BigDecimal} objects are immutable, |
| * calls of this method do <i>not</i> result in the original |
| * object being modified, contrary to the usual convention of |
| * having methods named <tt>set<i>X</i></tt> mutate field |
| * <i>{@code X}</i>. Instead, {@code setScale} returns an |
| * object with the proper scale; the returned object may or may |
| * not be newly allocated. |
| * |
| * @param newScale scale of the {@code BigDecimal} value to be returned. |
| * @return a {@code BigDecimal} whose scale is the specified value, and |
| * whose unscaled value is determined by multiplying or dividing |
| * this {@code BigDecimal}'s unscaled value by the appropriate |
| * power of ten to maintain its overall value. |
| * @throws java.lang.ArithmeticException if the specified scaling operation would |
| * require rounding. |
| * @see #setScale(int, int) |
| * @see #setScale(int, RoundingMode) |
| */ |
| |
| public java.math.BigDecimal setScale(int newScale) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a {@code BigDecimal} which is equivalent to this one |
| * with the decimal point moved {@code n} places to the left. If |
| * {@code n} is non-negative, the call merely adds {@code n} to |
| * the scale. If {@code n} is negative, the call is equivalent |
| * to {@code movePointRight(-n)}. The {@code BigDecimal} |
| * returned by this call has value <tt>(this × |
| * 10<sup>-n</sup>)</tt> and scale {@code max(this.scale()+n, |
| * 0)}. |
| * |
| * @param n number of places to move the decimal point to the left. |
| * @return a {@code BigDecimal} which is equivalent to this one with the |
| * decimal point moved {@code n} places to the left. |
| * @throws java.lang.ArithmeticException if scale overflows. |
| */ |
| |
| public java.math.BigDecimal movePointLeft(int n) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a {@code BigDecimal} which is equivalent to this one |
| * with the decimal point moved {@code n} places to the right. |
| * If {@code n} is non-negative, the call merely subtracts |
| * {@code n} from the scale. If {@code n} is negative, the call |
| * is equivalent to {@code movePointLeft(-n)}. The |
| * {@code BigDecimal} returned by this call has value <tt>(this |
| * × 10<sup>n</sup>)</tt> and scale {@code max(this.scale()-n, |
| * 0)}. |
| * |
| * @param n number of places to move the decimal point to the right. |
| * @return a {@code BigDecimal} which is equivalent to this one |
| * with the decimal point moved {@code n} places to the right. |
| * @throws java.lang.ArithmeticException if scale overflows. |
| */ |
| |
| public java.math.BigDecimal movePointRight(int n) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a BigDecimal whose numerical value is equal to |
| * ({@code this} * 10<sup>n</sup>). The scale of |
| * the result is {@code (this.scale() - n)}. |
| * |
| * @param n the exponent power of ten to scale by |
| * @return a BigDecimal whose numerical value is equal to |
| * ({@code this} * 10<sup>n</sup>) |
| * @throws java.lang.ArithmeticException if the scale would be |
| * outside the range of a 32-bit integer. |
| * |
| * @since 1.5 |
| */ |
| |
| public java.math.BigDecimal scaleByPowerOfTen(int n) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a {@code BigDecimal} which is numerically equal to |
| * this one but with any trailing zeros removed from the |
| * representation. For example, stripping the trailing zeros from |
| * the {@code BigDecimal} value {@code 600.0}, which has |
| * [{@code BigInteger}, {@code scale}] components equals to |
| * [6000, 1], yields {@code 6E2} with [{@code BigInteger}, |
| * {@code scale}] components equals to [6, -2]. If |
| * this BigDecimal is numerically equal to zero, then |
| * {@code BigDecimal.ZERO} is returned. |
| * |
| * @return a numerically equal {@code BigDecimal} with any |
| * trailing zeros removed. |
| * @since 1.5 |
| */ |
| |
| public java.math.BigDecimal stripTrailingZeros() { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Compares this {@code BigDecimal} with the specified |
| * {@code BigDecimal}. Two {@code BigDecimal} objects that are |
| * equal in value but have a different scale (like 2.0 and 2.00) |
| * are considered equal by this method. This method is provided |
| * in preference to individual methods for each of the six boolean |
| * comparison operators ({@literal <}, ==, |
| * {@literal >}, {@literal >=}, !=, {@literal <=}). The |
| * suggested idiom for performing these comparisons is: |
| * {@code (x.compareTo(y)} <<i>op</i>> {@code 0)}, where |
| * <<i>op</i>> is one of the six comparison operators. |
| * |
| * @param val {@code BigDecimal} to which this {@code BigDecimal} is |
| * to be compared. |
| * @return -1, 0, or 1 as this {@code BigDecimal} is numerically |
| * less than, equal to, or greater than {@code val}. |
| */ |
| |
| public int compareTo(java.math.BigDecimal val) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Compares this {@code BigDecimal} with the specified |
| * {@code Object} for equality. Unlike {@link |
| * #compareTo(java.math.BigDecimal) compareTo}, this method considers two |
| * {@code BigDecimal} objects equal only if they are equal in |
| * value and scale (thus 2.0 is not equal to 2.00 when compared by |
| * this method). |
| * |
| * @param x {@code Object} to which this {@code BigDecimal} is |
| * to be compared. |
| * @return {@code true} if and only if the specified {@code Object} is a |
| * {@code BigDecimal} whose value and scale are equal to this |
| * {@code BigDecimal}'s. |
| * @see #compareTo(java.math.BigDecimal) |
| * @see #hashCode |
| */ |
| |
| public boolean equals(java.lang.Object x) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns the minimum of this {@code BigDecimal} and |
| * {@code val}. |
| * |
| * @param val value with which the minimum is to be computed. |
| * @return the {@code BigDecimal} whose value is the lesser of this |
| * {@code BigDecimal} and {@code val}. If they are equal, |
| * as defined by the {@link #compareTo(java.math.BigDecimal) compareTo} |
| * method, {@code this} is returned. |
| * @see #compareTo(java.math.BigDecimal) |
| */ |
| |
| public java.math.BigDecimal min(java.math.BigDecimal val) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns the maximum of this {@code BigDecimal} and {@code val}. |
| * |
| * @param val value with which the maximum is to be computed. |
| * @return the {@code BigDecimal} whose value is the greater of this |
| * {@code BigDecimal} and {@code val}. If they are equal, |
| * as defined by the {@link #compareTo(java.math.BigDecimal) compareTo} |
| * method, {@code this} is returned. |
| * @see #compareTo(java.math.BigDecimal) |
| */ |
| |
| public java.math.BigDecimal max(java.math.BigDecimal val) { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns the hash code for this {@code BigDecimal}. Note that |
| * two {@code BigDecimal} objects that are numerically equal but |
| * differ in scale (like 2.0 and 2.00) will generally <i>not</i> |
| * have the same hash code. |
| * |
| * @return hash code for this {@code BigDecimal}. |
| * @see #equals(Object) |
| */ |
| |
| public int hashCode() { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns the string representation of this {@code BigDecimal}, |
| * using scientific notation if an exponent is needed. |
| * |
| * <p>A standard canonical string form of the {@code BigDecimal} |
| * is created as though by the following steps: first, the |
| * absolute value of the unscaled value of the {@code BigDecimal} |
| * is converted to a string in base ten using the characters |
| * {@code '0'} through {@code '9'} with no leading zeros (except |
| * if its value is zero, in which case a single {@code '0'} |
| * character is used). |
| * |
| * <p>Next, an <i>adjusted exponent</i> is calculated; this is the |
| * negated scale, plus the number of characters in the converted |
| * unscaled value, less one. That is, |
| * {@code -scale+(ulength-1)}, where {@code ulength} is the |
| * length of the absolute value of the unscaled value in decimal |
| * digits (its <i>precision</i>). |
| * |
| * <p>If the scale is greater than or equal to zero and the |
| * adjusted exponent is greater than or equal to {@code -6}, the |
| * number will be converted to a character form without using |
| * exponential notation. In this case, if the scale is zero then |
| * no decimal point is added and if the scale is positive a |
| * decimal point will be inserted with the scale specifying the |
| * number of characters to the right of the decimal point. |
| * {@code '0'} characters are added to the left of the converted |
| * unscaled value as necessary. If no character precedes the |
| * decimal point after this insertion then a conventional |
| * {@code '0'} character is prefixed. |
| * |
| * <p>Otherwise (that is, if the scale is negative, or the |
| * adjusted exponent is less than {@code -6}), the number will be |
| * converted to a character form using exponential notation. In |
| * this case, if the converted {@code BigInteger} has more than |
| * one digit a decimal point is inserted after the first digit. |
| * An exponent in character form is then suffixed to the converted |
| * unscaled value (perhaps with inserted decimal point); this |
| * comprises the letter {@code 'E'} followed immediately by the |
| * adjusted exponent converted to a character form. The latter is |
| * in base ten, using the characters {@code '0'} through |
| * {@code '9'} with no leading zeros, and is always prefixed by a |
| * sign character {@code '-'} (<tt>'\u002D'</tt>) if the |
| * adjusted exponent is negative, {@code '+'} |
| * (<tt>'\u002B'</tt>) otherwise). |
| * |
| * <p>Finally, the entire string is prefixed by a minus sign |
| * character {@code '-'} (<tt>'\u002D'</tt>) if the unscaled |
| * value is less than zero. No sign character is prefixed if the |
| * unscaled value is zero or positive. |
| * |
| * <p><b>Examples:</b> |
| * <p>For each representation [<i>unscaled value</i>, <i>scale</i>] |
| * on the left, the resulting string is shown on the right. |
| * <pre> |
| * [123,0] "123" |
| * [-123,0] "-123" |
| * [123,-1] "1.23E+3" |
| * [123,-3] "1.23E+5" |
| * [123,1] "12.3" |
| * [123,5] "0.00123" |
| * [123,10] "1.23E-8" |
| * [-123,12] "-1.23E-10" |
| * </pre> |
| * |
| * <b>Notes:</b> |
| * <ol> |
| * |
| * <li>There is a one-to-one mapping between the distinguishable |
| * {@code BigDecimal} values and the result of this conversion. |
| * That is, every distinguishable {@code BigDecimal} value |
| * (unscaled value and scale) has a unique string representation |
| * as a result of using {@code toString}. If that string |
| * representation is converted back to a {@code BigDecimal} using |
| * the {@link #BigDecimal(java.lang.String)} constructor, then the original |
| * value will be recovered. |
| * |
| * <li>The string produced for a given number is always the same; |
| * it is not affected by locale. This means that it can be used |
| * as a canonical string representation for exchanging decimal |
| * data, or as a key for a Hashtable, etc. Locale-sensitive |
| * number formatting and parsing is handled by the {@link |
| * java.text.NumberFormat} class and its subclasses. |
| * |
| * <li>The {@link #toEngineeringString} method may be used for |
| * presenting numbers with exponents in engineering notation, and the |
| * {@link #setScale(int,java.math.RoundingMode) setScale} method may be used for |
| * rounding a {@code BigDecimal} so it has a known number of digits after |
| * the decimal point. |
| * |
| * <li>The digit-to-character mapping provided by |
| * {@code Character.forDigit} is used. |
| * |
| * </ol> |
| * |
| * @return string representation of this {@code BigDecimal}. |
| * @see java.lang.Character#forDigit |
| * @see #BigDecimal(java.lang.String) |
| */ |
| |
| public java.lang.String toString() { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a string representation of this {@code BigDecimal}, |
| * using engineering notation if an exponent is needed. |
| * |
| * <p>Returns a string that represents the {@code BigDecimal} as |
| * described in the {@link #toString()} method, except that if |
| * exponential notation is used, the power of ten is adjusted to |
| * be a multiple of three (engineering notation) such that the |
| * integer part of nonzero values will be in the range 1 through |
| * 999. If exponential notation is used for zero values, a |
| * decimal point and one or two fractional zero digits are used so |
| * that the scale of the zero value is preserved. Note that |
| * unlike the output of {@link #toString()}, the output of this |
| * method is <em>not</em> guaranteed to recover the same [integer, |
| * scale] pair of this {@code BigDecimal} if the output string is |
| * converting back to a {@code BigDecimal} using the {@linkplain |
| * #BigDecimal(java.lang.String) string constructor}. The result of this method meets |
| * the weaker constraint of always producing a numerically equal |
| * result from applying the string constructor to the method's output. |
| * |
| * @return string representation of this {@code BigDecimal}, using |
| * engineering notation if an exponent is needed. |
| * @since 1.5 |
| */ |
| |
| public java.lang.String toEngineeringString() { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns a string representation of this {@code BigDecimal} |
| * without an exponent field. For values with a positive scale, |
| * the number of digits to the right of the decimal point is used |
| * to indicate scale. For values with a zero or negative scale, |
| * the resulting string is generated as if the value were |
| * converted to a numerically equal value with zero scale and as |
| * if all the trailing zeros of the zero scale value were present |
| * in the result. |
| * |
| * The entire string is prefixed by a minus sign character '-' |
| * (<tt>'\u002D'</tt>) if the unscaled value is less than |
| * zero. No sign character is prefixed if the unscaled value is |
| * zero or positive. |
| * |
| * Note that if the result of this method is passed to the |
| * {@linkplain #BigDecimal(java.lang.String) string constructor}, only the |
| * numerical value of this {@code BigDecimal} will necessarily be |
| * recovered; the representation of the new {@code BigDecimal} |
| * may have a different scale. In particular, if this |
| * {@code BigDecimal} has a negative scale, the string resulting |
| * from this method will have a scale of zero when processed by |
| * the string constructor. |
| * |
| * (This method behaves analogously to the {@code toString} |
| * method in 1.4 and earlier releases.) |
| * |
| * @return a string representation of this {@code BigDecimal} |
| * without an exponent field. |
| * @since 1.5 |
| * @see #toString() |
| * @see #toEngineeringString() |
| */ |
| |
| public java.lang.String toPlainString() { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Converts this {@code BigDecimal} to a {@code BigInteger}. |
| * This conversion is analogous to the |
| * <i>narrowing primitive conversion</i> from {@code double} to |
| * {@code long} as defined in section 5.1.3 of |
| * <cite>The Java™ Language Specification</cite>: |
| * any fractional part of this |
| * {@code BigDecimal} will be discarded. Note that this |
| * conversion can lose information about the precision of the |
| * {@code BigDecimal} value. |
| * <p> |
| * To have an exception thrown if the conversion is inexact (in |
| * other words if a nonzero fractional part is discarded), use the |
| * {@link #toBigIntegerExact()} method. |
| * |
| * @return this {@code BigDecimal} converted to a {@code BigInteger}. |
| */ |
| |
| public java.math.BigInteger toBigInteger() { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Converts this {@code BigDecimal} to a {@code BigInteger}, |
| * checking for lost information. An exception is thrown if this |
| * {@code BigDecimal} has a nonzero fractional part. |
| * |
| * @return this {@code BigDecimal} converted to a {@code BigInteger}. |
| * @throws java.lang.ArithmeticException if {@code this} has a nonzero |
| * fractional part. |
| * @since 1.5 |
| */ |
| |
| public java.math.BigInteger toBigIntegerExact() { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Converts this {@code BigDecimal} to a {@code long}. |
| * This conversion is analogous to the |
| * <i>narrowing primitive conversion</i> from {@code double} to |
| * {@code short} as defined in section 5.1.3 of |
| * <cite>The Java™ Language Specification</cite>: |
| * any fractional part of this |
| * {@code BigDecimal} will be discarded, and if the resulting |
| * "{@code BigInteger}" is too big to fit in a |
| * {@code long}, only the low-order 64 bits are returned. |
| * Note that this conversion can lose information about the |
| * overall magnitude and precision of this {@code BigDecimal} value as well |
| * as return a result with the opposite sign. |
| * |
| * @return this {@code BigDecimal} converted to a {@code long}. |
| */ |
| |
| public long longValue() { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Converts this {@code BigDecimal} to a {@code long}, checking |
| * for lost information. If this {@code BigDecimal} has a |
| * nonzero fractional part or is out of the possible range for a |
| * {@code long} result then an {@code ArithmeticException} is |
| * thrown. |
| * |
| * @return this {@code BigDecimal} converted to a {@code long}. |
| * @throws java.lang.ArithmeticException if {@code this} has a nonzero |
| * fractional part, or will not fit in a {@code long}. |
| * @since 1.5 |
| */ |
| |
| public long longValueExact() { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Converts this {@code BigDecimal} to an {@code int}. |
| * This conversion is analogous to the |
| * <i>narrowing primitive conversion</i> from {@code double} to |
| * {@code short} as defined in section 5.1.3 of |
| * <cite>The Java™ Language Specification</cite>: |
| * any fractional part of this |
| * {@code BigDecimal} will be discarded, and if the resulting |
| * "{@code BigInteger}" is too big to fit in an |
| * {@code int}, only the low-order 32 bits are returned. |
| * Note that this conversion can lose information about the |
| * overall magnitude and precision of this {@code BigDecimal} |
| * value as well as return a result with the opposite sign. |
| * |
| * @return this {@code BigDecimal} converted to an {@code int}. |
| */ |
| |
| public int intValue() { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Converts this {@code BigDecimal} to an {@code int}, checking |
| * for lost information. If this {@code BigDecimal} has a |
| * nonzero fractional part or is out of the possible range for an |
| * {@code int} result then an {@code ArithmeticException} is |
| * thrown. |
| * |
| * @return this {@code BigDecimal} converted to an {@code int}. |
| * @throws java.lang.ArithmeticException if {@code this} has a nonzero |
| * fractional part, or will not fit in an {@code int}. |
| * @since 1.5 |
| */ |
| |
| public int intValueExact() { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Converts this {@code BigDecimal} to a {@code short}, checking |
| * for lost information. If this {@code BigDecimal} has a |
| * nonzero fractional part or is out of the possible range for a |
| * {@code short} result then an {@code ArithmeticException} is |
| * thrown. |
| * |
| * @return this {@code BigDecimal} converted to a {@code short}. |
| * @throws java.lang.ArithmeticException if {@code this} has a nonzero |
| * fractional part, or will not fit in a {@code short}. |
| * @since 1.5 |
| */ |
| |
| public short shortValueExact() { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Converts this {@code BigDecimal} to a {@code byte}, checking |
| * for lost information. If this {@code BigDecimal} has a |
| * nonzero fractional part or is out of the possible range for a |
| * {@code byte} result then an {@code ArithmeticException} is |
| * thrown. |
| * |
| * @return this {@code BigDecimal} converted to a {@code byte}. |
| * @throws java.lang.ArithmeticException if {@code this} has a nonzero |
| * fractional part, or will not fit in a {@code byte}. |
| * @since 1.5 |
| */ |
| |
| public byte byteValueExact() { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Converts this {@code BigDecimal} to a {@code float}. |
| * This conversion is similar to the |
| * <i>narrowing primitive conversion</i> from {@code double} to |
| * {@code float} as defined in section 5.1.3 of |
| * <cite>The Java™ Language Specification</cite>: |
| * if this {@code BigDecimal} has too great a |
| * magnitude to represent as a {@code float}, it will be |
| * converted to {@link java.lang.Float#NEGATIVE_INFINITY Float#NEGATIVE_INFINITY} or {@link java.lang.Float#POSITIVE_INFINITY Float#POSITIVE_INFINITY} as appropriate. Note that even when |
| * the return value is finite, this conversion can lose |
| * information about the precision of the {@code BigDecimal} |
| * value. |
| * |
| * @return this {@code BigDecimal} converted to a {@code float}. |
| */ |
| |
| public float floatValue() { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Converts this {@code BigDecimal} to a {@code double}. |
| * This conversion is similar to the |
| * <i>narrowing primitive conversion</i> from {@code double} to |
| * {@code float} as defined in section 5.1.3 of |
| * <cite>The Java™ Language Specification</cite>: |
| * if this {@code BigDecimal} has too great a |
| * magnitude represent as a {@code double}, it will be |
| * converted to {@link java.lang.Double#NEGATIVE_INFINITY Double#NEGATIVE_INFINITY} or {@link java.lang.Double#POSITIVE_INFINITY Double#POSITIVE_INFINITY} as appropriate. Note that even when |
| * the return value is finite, this conversion can lose |
| * information about the precision of the {@code BigDecimal} |
| * value. |
| * |
| * @return this {@code BigDecimal} converted to a {@code double}. |
| */ |
| |
| public double doubleValue() { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * Returns the size of an ulp, a unit in the last place, of this |
| * {@code BigDecimal}. An ulp of a nonzero {@code BigDecimal} |
| * value is the positive distance between this value and the |
| * {@code BigDecimal} value next larger in magnitude with the |
| * same number of digits. An ulp of a zero value is numerically |
| * equal to 1 with the scale of {@code this}. The result is |
| * stored with the same scale as {@code this} so the result |
| * for zero and nonzero values is equal to {@code [1, |
| * this.scale()]}. |
| * |
| * @return the size of an ulp of {@code this} |
| * @since 1.5 |
| */ |
| |
| public java.math.BigDecimal ulp() { throw new RuntimeException("Stub!"); } |
| |
| /** |
| * The value 1, with a scale of 0. |
| * |
| * @since 1.5 |
| */ |
| |
| public static final java.math.BigDecimal ONE; |
| static { ONE = null; } |
| |
| /** |
| * Rounding mode to round towards positive infinity. If the |
| * {@code BigDecimal} is positive, behaves as for |
| * {@code ROUND_UP}; if negative, behaves as for |
| * {@code ROUND_DOWN}. Note that this rounding mode never |
| * decreases the calculated value. |
| */ |
| |
| public static final int ROUND_CEILING = 2; // 0x2 |
| |
| /** |
| * Rounding mode to round towards zero. Never increments the digit |
| * prior to a discarded fraction (i.e., truncates). Note that this |
| * rounding mode never increases the magnitude of the calculated value. |
| */ |
| |
| public static final int ROUND_DOWN = 1; // 0x1 |
| |
| /** |
| * Rounding mode to round towards negative infinity. If the |
| * {@code BigDecimal} is positive, behave as for |
| * {@code ROUND_DOWN}; if negative, behave as for |
| * {@code ROUND_UP}. Note that this rounding mode never |
| * increases the calculated value. |
| */ |
| |
| public static final int ROUND_FLOOR = 3; // 0x3 |
| |
| /** |
| * Rounding mode to round towards {@literal "nearest neighbor"} |
| * unless both neighbors are equidistant, in which case round |
| * down. Behaves as for {@code ROUND_UP} if the discarded |
| * fraction is {@literal >} 0.5; otherwise, behaves as for |
| * {@code ROUND_DOWN}. |
| */ |
| |
| public static final int ROUND_HALF_DOWN = 5; // 0x5 |
| |
| /** |
| * Rounding mode to round towards the {@literal "nearest neighbor"} |
| * unless both neighbors are equidistant, in which case, round |
| * towards the even neighbor. Behaves as for |
| * {@code ROUND_HALF_UP} if the digit to the left of the |
| * discarded fraction is odd; behaves as for |
| * {@code ROUND_HALF_DOWN} if it's even. Note that this is the |
| * rounding mode that minimizes cumulative error when applied |
| * repeatedly over a sequence of calculations. |
| */ |
| |
| public static final int ROUND_HALF_EVEN = 6; // 0x6 |
| |
| /** |
| * Rounding mode to round towards {@literal "nearest neighbor"} |
| * unless both neighbors are equidistant, in which case round up. |
| * Behaves as for {@code ROUND_UP} if the discarded fraction is |
| * ≥ 0.5; otherwise, behaves as for {@code ROUND_DOWN}. Note |
| * that this is the rounding mode that most of us were taught in |
| * grade school. |
| */ |
| |
| public static final int ROUND_HALF_UP = 4; // 0x4 |
| |
| /** |
| * Rounding mode to assert that the requested operation has an exact |
| * result, hence no rounding is necessary. If this rounding mode is |
| * specified on an operation that yields an inexact result, an |
| * {@code ArithmeticException} is thrown. |
| */ |
| |
| public static final int ROUND_UNNECESSARY = 7; // 0x7 |
| |
| /** |
| * Rounding mode to round away from zero. Always increments the |
| * digit prior to a nonzero discarded fraction. Note that this rounding |
| * mode never decreases the magnitude of the calculated value. |
| */ |
| |
| public static final int ROUND_UP = 0; // 0x0 |
| |
| /** |
| * The value 10, with a scale of 0. |
| * |
| * @since 1.5 |
| */ |
| |
| public static final java.math.BigDecimal TEN; |
| static { TEN = null; } |
| |
| /** |
| * The value 0, with a scale of 0. |
| * |
| * @since 1.5 |
| */ |
| |
| public static final java.math.BigDecimal ZERO; |
| static { ZERO = null; } |
| } |
| |