blob: e249a52e57a9839b7c32c444be97c864f6929acc [file] [log] [blame]
// Copyright 2011 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
package dwarfgen
import (
"bytes"
"flag"
"fmt"
"internal/buildcfg"
"sort"
"cmd/compile/internal/base"
"cmd/compile/internal/ir"
"cmd/compile/internal/reflectdata"
"cmd/compile/internal/ssa"
"cmd/compile/internal/ssagen"
"cmd/compile/internal/types"
"cmd/internal/dwarf"
"cmd/internal/obj"
"cmd/internal/objabi"
"cmd/internal/src"
)
func Info(fnsym *obj.LSym, infosym *obj.LSym, curfn interface{}) ([]dwarf.Scope, dwarf.InlCalls) {
fn := curfn.(*ir.Func)
if fn.Nname != nil {
expect := fn.Linksym()
if fnsym.ABI() == obj.ABI0 {
expect = fn.LinksymABI(obj.ABI0)
}
if fnsym != expect {
base.Fatalf("unexpected fnsym: %v != %v", fnsym, expect)
}
}
// Back when there were two different *Funcs for a function, this code
// was not consistent about whether a particular *Node being processed
// was an ODCLFUNC or ONAME node. Partly this is because inlined function
// bodies have no ODCLFUNC node, which was it's own inconsistency.
// In any event, the handling of the two different nodes for DWARF purposes
// was subtly different, likely in unintended ways. CL 272253 merged the
// two nodes' Func fields, so that code sees the same *Func whether it is
// holding the ODCLFUNC or the ONAME. This resulted in changes in the
// DWARF output. To preserve the existing DWARF output and leave an
// intentional change for a future CL, this code does the following when
// fn.Op == ONAME:
//
// 1. Disallow use of createComplexVars in createDwarfVars.
// It was not possible to reach that code for an ONAME before,
// because the DebugInfo was set only on the ODCLFUNC Func.
// Calling into it in the ONAME case causes an index out of bounds panic.
//
// 2. Do not populate apdecls. fn.Func.Dcl was in the ODCLFUNC Func,
// not the ONAME Func. Populating apdecls for the ONAME case results
// in selected being populated after createSimpleVars is called in
// createDwarfVars, and then that causes the loop to skip all the entries
// in dcl, meaning that the RecordAutoType calls don't happen.
//
// These two adjustments keep toolstash -cmp working for now.
// Deciding the right answer is, as they say, future work.
//
// We can tell the difference between the old ODCLFUNC and ONAME
// cases by looking at the infosym.Name. If it's empty, DebugInfo is
// being called from (*obj.Link).populateDWARF, which used to use
// the ODCLFUNC. If it's non-empty (the name will end in $abstract),
// DebugInfo is being called from (*obj.Link).DwarfAbstractFunc,
// which used to use the ONAME form.
isODCLFUNC := infosym.Name == ""
var apdecls []*ir.Name
// Populate decls for fn.
if isODCLFUNC {
for _, n := range fn.Dcl {
if n.Op() != ir.ONAME { // might be OTYPE or OLITERAL
continue
}
switch n.Class {
case ir.PAUTO:
if !n.Used() {
// Text == nil -> generating abstract function
if fnsym.Func().Text != nil {
base.Fatalf("debuginfo unused node (AllocFrame should truncate fn.Func.Dcl)")
}
continue
}
case ir.PPARAM, ir.PPARAMOUT:
default:
continue
}
apdecls = append(apdecls, n)
fnsym.Func().RecordAutoType(reflectdata.TypeLinksym(n.Type()))
}
}
decls, dwarfVars := createDwarfVars(fnsym, isODCLFUNC, fn, apdecls)
// For each type referenced by the functions auto vars but not
// already referenced by a dwarf var, attach an R_USETYPE relocation to
// the function symbol to insure that the type included in DWARF
// processing during linking.
typesyms := []*obj.LSym{}
for t, _ := range fnsym.Func().Autot {
typesyms = append(typesyms, t)
}
sort.Sort(obj.BySymName(typesyms))
for _, sym := range typesyms {
r := obj.Addrel(infosym)
r.Sym = sym
r.Type = objabi.R_USETYPE
}
fnsym.Func().Autot = nil
var varScopes []ir.ScopeID
for _, decl := range decls {
pos := declPos(decl)
varScopes = append(varScopes, findScope(fn.Marks, pos))
}
scopes := assembleScopes(fnsym, fn, dwarfVars, varScopes)
var inlcalls dwarf.InlCalls
if base.Flag.GenDwarfInl > 0 {
inlcalls = assembleInlines(fnsym, dwarfVars)
}
return scopes, inlcalls
}
func declPos(decl *ir.Name) src.XPos {
return decl.Canonical().Pos()
}
// createDwarfVars process fn, returning a list of DWARF variables and the
// Nodes they represent.
func createDwarfVars(fnsym *obj.LSym, complexOK bool, fn *ir.Func, apDecls []*ir.Name) ([]*ir.Name, []*dwarf.Var) {
// Collect a raw list of DWARF vars.
var vars []*dwarf.Var
var decls []*ir.Name
var selected ir.NameSet
if base.Ctxt.Flag_locationlists && base.Ctxt.Flag_optimize && fn.DebugInfo != nil && complexOK {
decls, vars, selected = createComplexVars(fnsym, fn)
} else if fn.ABI == obj.ABIInternal && base.Flag.N != 0 && complexOK {
decls, vars, selected = createABIVars(fnsym, fn, apDecls)
} else {
decls, vars, selected = createSimpleVars(fnsym, apDecls)
}
dcl := apDecls
if fnsym.WasInlined() {
dcl = preInliningDcls(fnsym)
} else {
// The backend's stackframe pass prunes away entries from the
// fn's Dcl list, including PARAMOUT nodes that correspond to
// output params passed in registers. Add back in these
// entries here so that we can process them properly during
// DWARF-gen. See issue 48573 for more details.
debugInfo := fn.DebugInfo.(*ssa.FuncDebug)
for _, n := range debugInfo.RegOutputParams {
if n.Class != ir.PPARAMOUT || !n.IsOutputParamInRegisters() {
panic("invalid ir.Name on debugInfo.RegOutputParams list")
}
dcl = append(dcl, n)
}
}
// If optimization is enabled, the list above will typically be
// missing some of the original pre-optimization variables in the
// function (they may have been promoted to registers, folded into
// constants, dead-coded away, etc). Input arguments not eligible
// for SSA optimization are also missing. Here we add back in entries
// for selected missing vars. Note that the recipe below creates a
// conservative location. The idea here is that we want to
// communicate to the user that "yes, there is a variable named X
// in this function, but no, I don't have enough information to
// reliably report its contents."
// For non-SSA-able arguments, however, the correct information
// is known -- they have a single home on the stack.
for _, n := range dcl {
if selected.Has(n) {
continue
}
c := n.Sym().Name[0]
if c == '.' || n.Type().IsUntyped() {
continue
}
if n.Class == ir.PPARAM && !ssagen.TypeOK(n.Type()) {
// SSA-able args get location lists, and may move in and
// out of registers, so those are handled elsewhere.
// Autos and named output params seem to get handled
// with VARDEF, which creates location lists.
// Args not of SSA-able type are treated here; they
// are homed on the stack in a single place for the
// entire call.
vars = append(vars, createSimpleVar(fnsym, n))
decls = append(decls, n)
continue
}
typename := dwarf.InfoPrefix + types.TypeSymName(n.Type())
decls = append(decls, n)
abbrev := dwarf.DW_ABRV_AUTO_LOCLIST
isReturnValue := (n.Class == ir.PPARAMOUT)
if n.Class == ir.PPARAM || n.Class == ir.PPARAMOUT {
abbrev = dwarf.DW_ABRV_PARAM_LOCLIST
}
if n.Esc() == ir.EscHeap {
// The variable in question has been promoted to the heap.
// Its address is in n.Heapaddr.
// TODO(thanm): generate a better location expression
}
inlIndex := 0
if base.Flag.GenDwarfInl > 1 {
if n.InlFormal() || n.InlLocal() {
inlIndex = posInlIndex(n.Pos()) + 1
if n.InlFormal() {
abbrev = dwarf.DW_ABRV_PARAM_LOCLIST
}
}
}
declpos := base.Ctxt.InnermostPos(n.Pos())
vars = append(vars, &dwarf.Var{
Name: n.Sym().Name,
IsReturnValue: isReturnValue,
Abbrev: abbrev,
StackOffset: int32(n.FrameOffset()),
Type: base.Ctxt.Lookup(typename),
DeclFile: declpos.RelFilename(),
DeclLine: declpos.RelLine(),
DeclCol: declpos.RelCol(),
InlIndex: int32(inlIndex),
ChildIndex: -1,
DictIndex: n.DictIndex,
})
// Record go type of to insure that it gets emitted by the linker.
fnsym.Func().RecordAutoType(reflectdata.TypeLinksym(n.Type()))
}
// Sort decls and vars.
sortDeclsAndVars(fn, decls, vars)
return decls, vars
}
// sortDeclsAndVars sorts the decl and dwarf var lists according to
// parameter declaration order, so as to insure that when a subprogram
// DIE is emitted, its parameter children appear in declaration order.
// Prior to the advent of the register ABI, sorting by frame offset
// would achieve this; with the register we now need to go back to the
// original function signature.
func sortDeclsAndVars(fn *ir.Func, decls []*ir.Name, vars []*dwarf.Var) {
paramOrder := make(map[*ir.Name]int)
idx := 1
for _, selfn := range types.RecvsParamsResults {
fsl := selfn(fn.Type()).FieldSlice()
for _, f := range fsl {
if n, ok := f.Nname.(*ir.Name); ok {
paramOrder[n] = idx
idx++
}
}
}
sort.Stable(varsAndDecls{decls, vars, paramOrder})
}
type varsAndDecls struct {
decls []*ir.Name
vars []*dwarf.Var
paramOrder map[*ir.Name]int
}
func (v varsAndDecls) Len() int {
return len(v.decls)
}
func (v varsAndDecls) Less(i, j int) bool {
nameLT := func(ni, nj *ir.Name) bool {
oi, foundi := v.paramOrder[ni]
oj, foundj := v.paramOrder[nj]
if foundi {
if foundj {
return oi < oj
} else {
return true
}
}
return false
}
return nameLT(v.decls[i], v.decls[j])
}
func (v varsAndDecls) Swap(i, j int) {
v.vars[i], v.vars[j] = v.vars[j], v.vars[i]
v.decls[i], v.decls[j] = v.decls[j], v.decls[i]
}
// Given a function that was inlined at some point during the
// compilation, return a sorted list of nodes corresponding to the
// autos/locals in that function prior to inlining. If this is a
// function that is not local to the package being compiled, then the
// names of the variables may have been "versioned" to avoid conflicts
// with local vars; disregard this versioning when sorting.
func preInliningDcls(fnsym *obj.LSym) []*ir.Name {
fn := base.Ctxt.DwFixups.GetPrecursorFunc(fnsym).(*ir.Func)
var rdcl []*ir.Name
for _, n := range fn.Inl.Dcl {
c := n.Sym().Name[0]
// Avoid reporting "_" parameters, since if there are more than
// one, it can result in a collision later on, as in #23179.
if unversion(n.Sym().Name) == "_" || c == '.' || n.Type().IsUntyped() {
continue
}
rdcl = append(rdcl, n)
}
return rdcl
}
// createSimpleVars creates a DWARF entry for every variable declared in the
// function, claiming that they are permanently on the stack.
func createSimpleVars(fnsym *obj.LSym, apDecls []*ir.Name) ([]*ir.Name, []*dwarf.Var, ir.NameSet) {
var vars []*dwarf.Var
var decls []*ir.Name
var selected ir.NameSet
for _, n := range apDecls {
if ir.IsAutoTmp(n) {
continue
}
decls = append(decls, n)
vars = append(vars, createSimpleVar(fnsym, n))
selected.Add(n)
}
return decls, vars, selected
}
func createSimpleVar(fnsym *obj.LSym, n *ir.Name) *dwarf.Var {
var abbrev int
var offs int64
localAutoOffset := func() int64 {
offs = n.FrameOffset()
if base.Ctxt.FixedFrameSize() == 0 {
offs -= int64(types.PtrSize)
}
if buildcfg.FramePointerEnabled {
offs -= int64(types.PtrSize)
}
return offs
}
switch n.Class {
case ir.PAUTO:
offs = localAutoOffset()
abbrev = dwarf.DW_ABRV_AUTO
case ir.PPARAM, ir.PPARAMOUT:
abbrev = dwarf.DW_ABRV_PARAM
if n.IsOutputParamInRegisters() {
offs = localAutoOffset()
} else {
offs = n.FrameOffset() + base.Ctxt.FixedFrameSize()
}
default:
base.Fatalf("createSimpleVar unexpected class %v for node %v", n.Class, n)
}
typename := dwarf.InfoPrefix + types.TypeSymName(n.Type())
delete(fnsym.Func().Autot, reflectdata.TypeLinksym(n.Type()))
inlIndex := 0
if base.Flag.GenDwarfInl > 1 {
if n.InlFormal() || n.InlLocal() {
inlIndex = posInlIndex(n.Pos()) + 1
if n.InlFormal() {
abbrev = dwarf.DW_ABRV_PARAM
}
}
}
declpos := base.Ctxt.InnermostPos(declPos(n))
return &dwarf.Var{
Name: n.Sym().Name,
IsReturnValue: n.Class == ir.PPARAMOUT,
IsInlFormal: n.InlFormal(),
Abbrev: abbrev,
StackOffset: int32(offs),
Type: base.Ctxt.Lookup(typename),
DeclFile: declpos.RelFilename(),
DeclLine: declpos.RelLine(),
DeclCol: declpos.RelCol(),
InlIndex: int32(inlIndex),
ChildIndex: -1,
DictIndex: n.DictIndex,
}
}
// createABIVars creates DWARF variables for functions in which the
// register ABI is enabled but optimization is turned off. It uses a
// hybrid approach in which register-resident input params are
// captured with location lists, and all other vars use the "simple"
// strategy.
func createABIVars(fnsym *obj.LSym, fn *ir.Func, apDecls []*ir.Name) ([]*ir.Name, []*dwarf.Var, ir.NameSet) {
// Invoke createComplexVars to generate dwarf vars for input parameters
// that are register-allocated according to the ABI rules.
decls, vars, selected := createComplexVars(fnsym, fn)
// Now fill in the remainder of the variables: input parameters
// that are not register-resident, output parameters, and local
// variables.
for _, n := range apDecls {
if ir.IsAutoTmp(n) {
continue
}
if _, ok := selected[n]; ok {
// already handled
continue
}
decls = append(decls, n)
vars = append(vars, createSimpleVar(fnsym, n))
selected.Add(n)
}
return decls, vars, selected
}
// createComplexVars creates recomposed DWARF vars with location lists,
// suitable for describing optimized code.
func createComplexVars(fnsym *obj.LSym, fn *ir.Func) ([]*ir.Name, []*dwarf.Var, ir.NameSet) {
debugInfo := fn.DebugInfo.(*ssa.FuncDebug)
// Produce a DWARF variable entry for each user variable.
var decls []*ir.Name
var vars []*dwarf.Var
var ssaVars ir.NameSet
for varID, dvar := range debugInfo.Vars {
n := dvar
ssaVars.Add(n)
for _, slot := range debugInfo.VarSlots[varID] {
ssaVars.Add(debugInfo.Slots[slot].N)
}
if dvar := createComplexVar(fnsym, fn, ssa.VarID(varID)); dvar != nil {
decls = append(decls, n)
vars = append(vars, dvar)
}
}
return decls, vars, ssaVars
}
// createComplexVar builds a single DWARF variable entry and location list.
func createComplexVar(fnsym *obj.LSym, fn *ir.Func, varID ssa.VarID) *dwarf.Var {
debug := fn.DebugInfo.(*ssa.FuncDebug)
n := debug.Vars[varID]
var abbrev int
switch n.Class {
case ir.PAUTO:
abbrev = dwarf.DW_ABRV_AUTO_LOCLIST
case ir.PPARAM, ir.PPARAMOUT:
abbrev = dwarf.DW_ABRV_PARAM_LOCLIST
default:
return nil
}
gotype := reflectdata.TypeLinksym(n.Type())
delete(fnsym.Func().Autot, gotype)
typename := dwarf.InfoPrefix + gotype.Name[len("type."):]
inlIndex := 0
if base.Flag.GenDwarfInl > 1 {
if n.InlFormal() || n.InlLocal() {
inlIndex = posInlIndex(n.Pos()) + 1
if n.InlFormal() {
abbrev = dwarf.DW_ABRV_PARAM_LOCLIST
}
}
}
declpos := base.Ctxt.InnermostPos(n.Pos())
dvar := &dwarf.Var{
Name: n.Sym().Name,
IsReturnValue: n.Class == ir.PPARAMOUT,
IsInlFormal: n.InlFormal(),
Abbrev: abbrev,
Type: base.Ctxt.Lookup(typename),
// The stack offset is used as a sorting key, so for decomposed
// variables just give it the first one. It's not used otherwise.
// This won't work well if the first slot hasn't been assigned a stack
// location, but it's not obvious how to do better.
StackOffset: ssagen.StackOffset(debug.Slots[debug.VarSlots[varID][0]]),
DeclFile: declpos.RelFilename(),
DeclLine: declpos.RelLine(),
DeclCol: declpos.RelCol(),
InlIndex: int32(inlIndex),
ChildIndex: -1,
DictIndex: n.DictIndex,
}
list := debug.LocationLists[varID]
if len(list) != 0 {
dvar.PutLocationList = func(listSym, startPC dwarf.Sym) {
debug.PutLocationList(list, base.Ctxt, listSym.(*obj.LSym), startPC.(*obj.LSym))
}
}
return dvar
}
// RecordFlags records the specified command-line flags to be placed
// in the DWARF info.
func RecordFlags(flags ...string) {
if base.Ctxt.Pkgpath == "" {
// We can't record the flags if we don't know what the
// package name is.
return
}
type BoolFlag interface {
IsBoolFlag() bool
}
type CountFlag interface {
IsCountFlag() bool
}
var cmd bytes.Buffer
for _, name := range flags {
f := flag.Lookup(name)
if f == nil {
continue
}
getter := f.Value.(flag.Getter)
if getter.String() == f.DefValue {
// Flag has default value, so omit it.
continue
}
if bf, ok := f.Value.(BoolFlag); ok && bf.IsBoolFlag() {
val, ok := getter.Get().(bool)
if ok && val {
fmt.Fprintf(&cmd, " -%s", f.Name)
continue
}
}
if cf, ok := f.Value.(CountFlag); ok && cf.IsCountFlag() {
val, ok := getter.Get().(int)
if ok && val == 1 {
fmt.Fprintf(&cmd, " -%s", f.Name)
continue
}
}
fmt.Fprintf(&cmd, " -%s=%v", f.Name, getter.Get())
}
// Adds flag to producer string singalling whether regabi is turned on or
// off.
// Once regabi is turned on across the board and the relative GOEXPERIMENT
// knobs no longer exist this code should be removed.
if buildcfg.Experiment.RegabiArgs {
cmd.Write([]byte(" regabi"))
}
if cmd.Len() == 0 {
return
}
s := base.Ctxt.Lookup(dwarf.CUInfoPrefix + "producer." + base.Ctxt.Pkgpath)
s.Type = objabi.SDWARFCUINFO
// Sometimes (for example when building tests) we can link
// together two package main archives. So allow dups.
s.Set(obj.AttrDuplicateOK, true)
base.Ctxt.Data = append(base.Ctxt.Data, s)
s.P = cmd.Bytes()[1:]
}
// RecordPackageName records the name of the package being
// compiled, so that the linker can save it in the compile unit's DIE.
func RecordPackageName() {
s := base.Ctxt.Lookup(dwarf.CUInfoPrefix + "packagename." + base.Ctxt.Pkgpath)
s.Type = objabi.SDWARFCUINFO
// Sometimes (for example when building tests) we can link
// together two package main archives. So allow dups.
s.Set(obj.AttrDuplicateOK, true)
base.Ctxt.Data = append(base.Ctxt.Data, s)
s.P = []byte(types.LocalPkg.Name)
}