| /* |
| * Copyright (c) 1995, 2012, Oracle and/or its affiliates. All rights reserved. |
| * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
| * |
| * This code is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 only, as |
| * published by the Free Software Foundation. Oracle designates this |
| * particular file as subject to the "Classpath" exception as provided |
| * by Oracle in the LICENSE file that accompanied this code. |
| * |
| * This code is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * version 2 for more details (a copy is included in the LICENSE file that |
| * accompanied this code). |
| * |
| * You should have received a copy of the GNU General Public License version |
| * 2 along with this work; if not, write to the Free Software Foundation, |
| * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. |
| * |
| * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA |
| * or visit www.oracle.com if you need additional information or have any |
| * questions. |
| */ |
| |
| package java.io; |
| |
| /** |
| * This class is an input stream filter that provides the added |
| * functionality of keeping track of the current line number. |
| * <p> |
| * A line is a sequence of bytes ending with a carriage return |
| * character ({@code '\u005Cr'}), a newline character |
| * ({@code '\u005Cn'}), or a carriage return character followed |
| * immediately by a linefeed character. In all three cases, the line |
| * terminating character(s) are returned as a single newline character. |
| * <p> |
| * The line number begins at {@code 0}, and is incremented by |
| * {@code 1} when a {@code read} returns a newline character. |
| * |
| * @author Arthur van Hoff |
| * @see java.io.LineNumberReader |
| * @since JDK1.0 |
| * @deprecated This class incorrectly assumes that bytes adequately represent |
| * characters. As of JDK 1.1, the preferred way to operate on |
| * character streams is via the new character-stream classes, which |
| * include a class for counting line numbers. |
| */ |
| @Deprecated |
| public |
| class LineNumberInputStream extends FilterInputStream { |
| int pushBack = -1; |
| int lineNumber; |
| int markLineNumber; |
| int markPushBack = -1; |
| |
| /** |
| * Constructs a newline number input stream that reads its input |
| * from the specified input stream. |
| * |
| * @param in the underlying input stream. |
| */ |
| public LineNumberInputStream(InputStream in) { |
| super(in); |
| } |
| |
| /** |
| * Reads the next byte of data from this input stream. The value |
| * byte is returned as an {@code int} in the range |
| * {@code 0} to {@code 255}. If no byte is available |
| * because the end of the stream has been reached, the value |
| * {@code -1} is returned. This method blocks until input data |
| * is available, the end of the stream is detected, or an exception |
| * is thrown. |
| * <p> |
| * The {@code read} method of |
| * {@code LineNumberInputStream} calls the {@code read} |
| * method of the underlying input stream. It checks for carriage |
| * returns and newline characters in the input, and modifies the |
| * current line number as appropriate. A carriage-return character or |
| * a carriage return followed by a newline character are both |
| * converted into a single newline character. |
| * |
| * @return the next byte of data, or {@code -1} if the end of this |
| * stream is reached. |
| * @exception IOException if an I/O error occurs. |
| * @see java.io.FilterInputStream#in |
| * @see java.io.LineNumberInputStream#getLineNumber() |
| */ |
| @SuppressWarnings("fallthrough") |
| public int read() throws IOException { |
| int c = pushBack; |
| |
| if (c != -1) { |
| pushBack = -1; |
| } else { |
| c = in.read(); |
| } |
| |
| switch (c) { |
| case '\r': |
| pushBack = in.read(); |
| if (pushBack == '\n') { |
| pushBack = -1; |
| } |
| case '\n': |
| lineNumber++; |
| return '\n'; |
| } |
| return c; |
| } |
| |
| /** |
| * Reads up to {@code len} bytes of data from this input stream |
| * into an array of bytes. This method blocks until some input is available. |
| * <p> |
| * The {@code read} method of |
| * {@code LineNumberInputStream} repeatedly calls the |
| * {@code read} method of zero arguments to fill in the byte array. |
| * |
| * @param b the buffer into which the data is read. |
| * @param off the start offset of the data. |
| * @param len the maximum number of bytes read. |
| * @return the total number of bytes read into the buffer, or |
| * {@code -1} if there is no more data because the end of |
| * this stream has been reached. |
| * @exception IOException if an I/O error occurs. |
| * @see java.io.LineNumberInputStream#read() |
| */ |
| public int read(byte b[], int off, int len) throws IOException { |
| if (b == null) { |
| throw new NullPointerException(); |
| } else if ((off < 0) || (off > b.length) || (len < 0) || |
| ((off + len) > b.length) || ((off + len) < 0)) { |
| throw new IndexOutOfBoundsException(); |
| } else if (len == 0) { |
| return 0; |
| } |
| |
| int c = read(); |
| if (c == -1) { |
| return -1; |
| } |
| b[off] = (byte)c; |
| |
| int i = 1; |
| try { |
| for (; i < len ; i++) { |
| c = read(); |
| if (c == -1) { |
| break; |
| } |
| if (b != null) { |
| b[off + i] = (byte)c; |
| } |
| } |
| } catch (IOException ee) { |
| } |
| return i; |
| } |
| |
| /** |
| * Skips over and discards {@code n} bytes of data from this |
| * input stream. The {@code skip} method may, for a variety of |
| * reasons, end up skipping over some smaller number of bytes, |
| * possibly {@code 0}. The actual number of bytes skipped is |
| * returned. If {@code n} is negative, no bytes are skipped. |
| * <p> |
| * The {@code skip} method of {@code LineNumberInputStream} creates |
| * a byte array and then repeatedly reads into it until |
| * {@code n} bytes have been read or the end of the stream has |
| * been reached. |
| * |
| * @param n the number of bytes to be skipped. |
| * @return the actual number of bytes skipped. |
| * @exception IOException if an I/O error occurs. |
| * @see java.io.FilterInputStream#in |
| */ |
| public long skip(long n) throws IOException { |
| int chunk = 2048; |
| long remaining = n; |
| byte data[]; |
| int nr; |
| |
| if (n <= 0) { |
| return 0; |
| } |
| |
| data = new byte[chunk]; |
| while (remaining > 0) { |
| nr = read(data, 0, (int) Math.min(chunk, remaining)); |
| if (nr < 0) { |
| break; |
| } |
| remaining -= nr; |
| } |
| |
| return n - remaining; |
| } |
| |
| /** |
| * Sets the line number to the specified argument. |
| * |
| * @param lineNumber the new line number. |
| * @see #getLineNumber |
| */ |
| public void setLineNumber(int lineNumber) { |
| this.lineNumber = lineNumber; |
| } |
| |
| /** |
| * Returns the current line number. |
| * |
| * @return the current line number. |
| * @see #setLineNumber |
| */ |
| public int getLineNumber() { |
| return lineNumber; |
| } |
| |
| |
| /** |
| * Returns the number of bytes that can be read from this input |
| * stream without blocking. |
| * <p> |
| * Note that if the underlying input stream is able to supply |
| * <i>k</i> input characters without blocking, the |
| * {@code LineNumberInputStream} can guarantee only to provide |
| * <i>k</i>/2 characters without blocking, because the |
| * <i>k</i> characters from the underlying input stream might |
| * consist of <i>k</i>/2 pairs of {@code '\u005Cr'} and |
| * {@code '\u005Cn'}, which are converted to just |
| * <i>k</i>/2 {@code '\u005Cn'} characters. |
| * |
| * @return the number of bytes that can be read from this input stream |
| * without blocking. |
| * @exception IOException if an I/O error occurs. |
| * @see java.io.FilterInputStream#in |
| */ |
| public int available() throws IOException { |
| return (pushBack == -1) ? super.available()/2 : super.available()/2 + 1; |
| } |
| |
| /** |
| * Marks the current position in this input stream. A subsequent |
| * call to the {@code reset} method repositions this stream at |
| * the last marked position so that subsequent reads re-read the same bytes. |
| * <p> |
| * The {@code mark} method of |
| * {@code LineNumberInputStream} remembers the current line |
| * number in a private variable, and then calls the {@code mark} |
| * method of the underlying input stream. |
| * |
| * @param readlimit the maximum limit of bytes that can be read before |
| * the mark position becomes invalid. |
| * @see java.io.FilterInputStream#in |
| * @see java.io.LineNumberInputStream#reset() |
| */ |
| public void mark(int readlimit) { |
| markLineNumber = lineNumber; |
| markPushBack = pushBack; |
| in.mark(readlimit); |
| } |
| |
| /** |
| * Repositions this stream to the position at the time the |
| * {@code mark} method was last called on this input stream. |
| * <p> |
| * The {@code reset} method of |
| * {@code LineNumberInputStream} resets the line number to be |
| * the line number at the time the {@code mark} method was |
| * called, and then calls the {@code reset} method of the |
| * underlying input stream. |
| * <p> |
| * Stream marks are intended to be used in |
| * situations where you need to read ahead a little to see what's in |
| * the stream. Often this is most easily done by invoking some |
| * general parser. If the stream is of the type handled by the |
| * parser, it just chugs along happily. If the stream is not of |
| * that type, the parser should toss an exception when it fails, |
| * which, if it happens within readlimit bytes, allows the outer |
| * code to reset the stream and try another parser. |
| * |
| * @exception IOException if an I/O error occurs. |
| * @see java.io.FilterInputStream#in |
| * @see java.io.LineNumberInputStream#mark(int) |
| */ |
| public void reset() throws IOException { |
| lineNumber = markLineNumber; |
| pushBack = markPushBack; |
| in.reset(); |
| } |
| } |