| /* |
| * Copyright (c) 2012, 2015, Oracle and/or its affiliates. All rights reserved. |
| * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
| * |
| * This code is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 only, as |
| * published by the Free Software Foundation. Oracle designates this |
| * particular file as subject to the "Classpath" exception as provided |
| * by Oracle in the LICENSE file that accompanied this code. |
| * |
| * This code is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * version 2 for more details (a copy is included in the LICENSE file that |
| * accompanied this code). |
| * |
| * You should have received a copy of the GNU General Public License version |
| * 2 along with this work; if not, write to the Free Software Foundation, |
| * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. |
| * |
| * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA |
| * or visit www.oracle.com if you need additional information or have any |
| * questions. |
| */ |
| |
| /* |
| * This file is available under and governed by the GNU General Public |
| * License version 2 only, as published by the Free Software Foundation. |
| * However, the following notice accompanied the original version of this |
| * file: |
| * |
| * Copyright (c) 2008-2012, Stephen Colebourne & Michael Nascimento Santos |
| * |
| * All rights hg qreserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * |
| * * Redistributions of source code must retain the above copyright notice, |
| * this list of conditions and the following disclaimer. |
| * |
| * * Redistributions in binary form must reproduce the above copyright notice, |
| * this list of conditions and the following disclaimer in the documentation |
| * and/or other materials provided with the distribution. |
| * |
| * * Neither the name of JSR-310 nor the names of its contributors |
| * may be used to endorse or promote products derived from this software |
| * without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR |
| * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, |
| * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, |
| * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR |
| * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF |
| * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING |
| * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| package java.time.format; |
| |
| import android.icu.impl.ZoneMeta; |
| import android.icu.text.LocaleDisplayNames; |
| import android.icu.text.TimeZoneFormat; |
| import android.icu.text.TimeZoneNames; |
| import android.icu.util.Calendar; |
| import android.icu.util.ULocale; |
| |
| import static java.time.temporal.ChronoField.DAY_OF_MONTH; |
| import static java.time.temporal.ChronoField.HOUR_OF_DAY; |
| import static java.time.temporal.ChronoField.INSTANT_SECONDS; |
| import static java.time.temporal.ChronoField.MINUTE_OF_HOUR; |
| import static java.time.temporal.ChronoField.MONTH_OF_YEAR; |
| import static java.time.temporal.ChronoField.NANO_OF_SECOND; |
| import static java.time.temporal.ChronoField.OFFSET_SECONDS; |
| import static java.time.temporal.ChronoField.SECOND_OF_MINUTE; |
| import static java.time.temporal.ChronoField.YEAR; |
| |
| import java.lang.ref.SoftReference; |
| import java.math.BigDecimal; |
| import java.math.BigInteger; |
| import java.math.RoundingMode; |
| import java.text.ParsePosition; |
| import java.time.DateTimeException; |
| import java.time.Instant; |
| import java.time.LocalDate; |
| import java.time.LocalDateTime; |
| import java.time.ZoneId; |
| import java.time.ZoneOffset; |
| import java.time.chrono.ChronoLocalDate; |
| import java.time.chrono.Chronology; |
| import java.time.chrono.IsoChronology; |
| import java.time.format.DateTimeTextProvider.LocaleStore; |
| import java.time.temporal.ChronoField; |
| import java.time.temporal.IsoFields; |
| import java.time.temporal.TemporalAccessor; |
| import java.time.temporal.TemporalField; |
| import java.time.temporal.TemporalQueries; |
| import java.time.temporal.TemporalQuery; |
| import java.time.temporal.ValueRange; |
| import java.time.temporal.WeekFields; |
| import java.time.zone.ZoneRulesProvider; |
| import java.util.AbstractMap.SimpleImmutableEntry; |
| import java.util.ArrayList; |
| import java.util.Collections; |
| import java.util.Comparator; |
| import java.util.HashMap; |
| import java.util.HashSet; |
| import java.util.Iterator; |
| import java.util.LinkedHashMap; |
| import java.util.List; |
| import java.util.Locale; |
| import java.util.Map; |
| import java.util.Map.Entry; |
| import java.util.Objects; |
| import java.util.Set; |
| import java.util.TimeZone; |
| import java.util.concurrent.ConcurrentHashMap; |
| import java.util.concurrent.ConcurrentMap; |
| |
| /** |
| * Builder to create date-time formatters. |
| * <p> |
| * This allows a {@code DateTimeFormatter} to be created. |
| * All date-time formatters are created ultimately using this builder. |
| * <p> |
| * The basic elements of date-time can all be added: |
| * <ul> |
| * <li>Value - a numeric value</li> |
| * <li>Fraction - a fractional value including the decimal place. Always use this when |
| * outputting fractions to ensure that the fraction is parsed correctly</li> |
| * <li>Text - the textual equivalent for the value</li> |
| * <li>OffsetId/Offset - the {@linkplain ZoneOffset zone offset}</li> |
| * <li>ZoneId - the {@linkplain ZoneId time-zone} id</li> |
| * <li>ZoneText - the name of the time-zone</li> |
| * <li>ChronologyId - the {@linkplain Chronology chronology} id</li> |
| * <li>ChronologyText - the name of the chronology</li> |
| * <li>Literal - a text literal</li> |
| * <li>Nested and Optional - formats can be nested or made optional</li> |
| * </ul> |
| * In addition, any of the elements may be decorated by padding, either with spaces or any other character. |
| * <p> |
| * Finally, a shorthand pattern, mostly compatible with {@code java.text.SimpleDateFormat SimpleDateFormat} |
| * can be used, see {@link #appendPattern(String)}. |
| * In practice, this simply parses the pattern and calls other methods on the builder. |
| * |
| * @implSpec |
| * This class is a mutable builder intended for use from a single thread. |
| * |
| * @since 1.8 |
| */ |
| public final class DateTimeFormatterBuilder { |
| |
| /** |
| * Query for a time-zone that is region-only. |
| */ |
| private static final TemporalQuery<ZoneId> QUERY_REGION_ONLY = (temporal) -> { |
| ZoneId zone = temporal.query(TemporalQueries.zoneId()); |
| return (zone != null && zone instanceof ZoneOffset == false ? zone : null); |
| }; |
| |
| /** |
| * The currently active builder, used by the outermost builder. |
| */ |
| private DateTimeFormatterBuilder active = this; |
| /** |
| * The parent builder, null for the outermost builder. |
| */ |
| private final DateTimeFormatterBuilder parent; |
| /** |
| * The list of printers that will be used. |
| */ |
| private final List<DateTimePrinterParser> printerParsers = new ArrayList<>(); |
| /** |
| * Whether this builder produces an optional formatter. |
| */ |
| private final boolean optional; |
| /** |
| * The width to pad the next field to. |
| */ |
| private int padNextWidth; |
| /** |
| * The character to pad the next field with. |
| */ |
| private char padNextChar; |
| /** |
| * The index of the last variable width value parser. |
| */ |
| private int valueParserIndex = -1; |
| |
| /** |
| * Gets the formatting pattern for date and time styles for a locale and chronology. |
| * The locale and chronology are used to lookup the locale specific format |
| * for the requested dateStyle and/or timeStyle. |
| * |
| * @param dateStyle the FormatStyle for the date, null for time-only pattern |
| * @param timeStyle the FormatStyle for the time, null for date-only pattern |
| * @param chrono the Chronology, non-null |
| * @param locale the locale, non-null |
| * @return the locale and Chronology specific formatting pattern |
| * @throws IllegalArgumentException if both dateStyle and timeStyle are null |
| */ |
| public static String getLocalizedDateTimePattern(FormatStyle dateStyle, FormatStyle timeStyle, |
| Chronology chrono, Locale locale) { |
| Objects.requireNonNull(locale, "locale"); |
| Objects.requireNonNull(chrono, "chrono"); |
| if (dateStyle == null && timeStyle == null) { |
| throw new IllegalArgumentException("Either dateStyle or timeStyle must be non-null"); |
| } |
| |
| // Android-changed: get format string from ICU. |
| // LocaleResources lr = LocaleProviderAdapter.getResourceBundleBased() |
| // .getLocaleResources(locale); |
| // String pattern = lr.getJavaTimeDateTimePattern( |
| // convertStyle(timeStyle), convertStyle(dateStyle), chrono.getCalendarType()); |
| String pattern = Calendar.getDateTimeFormatString( |
| ULocale.forLocale(locale), chrono.getCalendarType(), |
| convertStyle(dateStyle), convertStyle(timeStyle)); |
| return pattern; |
| } |
| |
| /** |
| * Converts the given FormatStyle to the java.text.DateFormat style. |
| * |
| * @param style the FormatStyle style |
| * @return the int style, or -1 if style is null, indicating un-required |
| */ |
| private static int convertStyle(FormatStyle style) { |
| if (style == null) { |
| return -1; |
| } |
| return style.ordinal(); // indices happen to align |
| } |
| |
| /** |
| * Constructs a new instance of the builder. |
| */ |
| public DateTimeFormatterBuilder() { |
| super(); |
| parent = null; |
| optional = false; |
| } |
| |
| /** |
| * Constructs a new instance of the builder. |
| * |
| * @param parent the parent builder, not null |
| * @param optional whether the formatter is optional, not null |
| */ |
| private DateTimeFormatterBuilder(DateTimeFormatterBuilder parent, boolean optional) { |
| super(); |
| this.parent = parent; |
| this.optional = optional; |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Changes the parse style to be case sensitive for the remainder of the formatter. |
| * <p> |
| * Parsing can be case sensitive or insensitive - by default it is case sensitive. |
| * This method allows the case sensitivity setting of parsing to be changed. |
| * <p> |
| * Calling this method changes the state of the builder such that all |
| * subsequent builder method calls will parse text in case sensitive mode. |
| * See {@link #parseCaseInsensitive} for the opposite setting. |
| * The parse case sensitive/insensitive methods may be called at any point |
| * in the builder, thus the parser can swap between case parsing modes |
| * multiple times during the parse. |
| * <p> |
| * Since the default is case sensitive, this method should only be used after |
| * a previous call to {@code #parseCaseInsensitive}. |
| * |
| * @return this, for chaining, not null |
| */ |
| public DateTimeFormatterBuilder parseCaseSensitive() { |
| appendInternal(SettingsParser.SENSITIVE); |
| return this; |
| } |
| |
| /** |
| * Changes the parse style to be case insensitive for the remainder of the formatter. |
| * <p> |
| * Parsing can be case sensitive or insensitive - by default it is case sensitive. |
| * This method allows the case sensitivity setting of parsing to be changed. |
| * <p> |
| * Calling this method changes the state of the builder such that all |
| * subsequent builder method calls will parse text in case insensitive mode. |
| * See {@link #parseCaseSensitive()} for the opposite setting. |
| * The parse case sensitive/insensitive methods may be called at any point |
| * in the builder, thus the parser can swap between case parsing modes |
| * multiple times during the parse. |
| * |
| * @return this, for chaining, not null |
| */ |
| public DateTimeFormatterBuilder parseCaseInsensitive() { |
| appendInternal(SettingsParser.INSENSITIVE); |
| return this; |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Changes the parse style to be strict for the remainder of the formatter. |
| * <p> |
| * Parsing can be strict or lenient - by default its strict. |
| * This controls the degree of flexibility in matching the text and sign styles. |
| * <p> |
| * When used, this method changes the parsing to be strict from this point onwards. |
| * As strict is the default, this is normally only needed after calling {@link #parseLenient()}. |
| * The change will remain in force until the end of the formatter that is eventually |
| * constructed or until {@code parseLenient} is called. |
| * |
| * @return this, for chaining, not null |
| */ |
| public DateTimeFormatterBuilder parseStrict() { |
| appendInternal(SettingsParser.STRICT); |
| return this; |
| } |
| |
| /** |
| * Changes the parse style to be lenient for the remainder of the formatter. |
| * Note that case sensitivity is set separately to this method. |
| * <p> |
| * Parsing can be strict or lenient - by default its strict. |
| * This controls the degree of flexibility in matching the text and sign styles. |
| * Applications calling this method should typically also call {@link #parseCaseInsensitive()}. |
| * <p> |
| * When used, this method changes the parsing to be lenient from this point onwards. |
| * The change will remain in force until the end of the formatter that is eventually |
| * constructed or until {@code parseStrict} is called. |
| * |
| * @return this, for chaining, not null |
| */ |
| public DateTimeFormatterBuilder parseLenient() { |
| appendInternal(SettingsParser.LENIENT); |
| return this; |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Appends a default value for a field to the formatter for use in parsing. |
| * <p> |
| * This appends an instruction to the builder to inject a default value |
| * into the parsed result. This is especially useful in conjunction with |
| * optional parts of the formatter. |
| * <p> |
| * For example, consider a formatter that parses the year, followed by |
| * an optional month, with a further optional day-of-month. Using such a |
| * formatter would require the calling code to check whether a full date, |
| * year-month or just a year had been parsed. This method can be used to |
| * default the month and day-of-month to a sensible value, such as the |
| * first of the month, allowing the calling code to always get a date. |
| * <p> |
| * During formatting, this method has no effect. |
| * <p> |
| * During parsing, the current state of the parse is inspected. |
| * If the specified field has no associated value, because it has not been |
| * parsed successfully at that point, then the specified value is injected |
| * into the parse result. Injection is immediate, thus the field-value pair |
| * will be visible to any subsequent elements in the formatter. |
| * As such, this method is normally called at the end of the builder. |
| * |
| * @param field the field to default the value of, not null |
| * @param value the value to default the field to |
| * @return this, for chaining, not null |
| */ |
| public DateTimeFormatterBuilder parseDefaulting(TemporalField field, long value) { |
| Objects.requireNonNull(field, "field"); |
| appendInternal(new DefaultValueParser(field, value)); |
| return this; |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Appends the value of a date-time field to the formatter using a normal |
| * output style. |
| * <p> |
| * The value of the field will be output during a format. |
| * If the value cannot be obtained then an exception will be thrown. |
| * <p> |
| * The value will be printed as per the normal format of an integer value. |
| * Only negative numbers will be signed. No padding will be added. |
| * <p> |
| * The parser for a variable width value such as this normally behaves greedily, |
| * requiring one digit, but accepting as many digits as possible. |
| * This behavior can be affected by 'adjacent value parsing'. |
| * See {@link #appendValue(java.time.temporal.TemporalField, int)} for full details. |
| * |
| * @param field the field to append, not null |
| * @return this, for chaining, not null |
| */ |
| public DateTimeFormatterBuilder appendValue(TemporalField field) { |
| Objects.requireNonNull(field, "field"); |
| appendValue(new NumberPrinterParser(field, 1, 19, SignStyle.NORMAL)); |
| return this; |
| } |
| |
| /** |
| * Appends the value of a date-time field to the formatter using a fixed |
| * width, zero-padded approach. |
| * <p> |
| * The value of the field will be output during a format. |
| * If the value cannot be obtained then an exception will be thrown. |
| * <p> |
| * The value will be zero-padded on the left. If the size of the value |
| * means that it cannot be printed within the width then an exception is thrown. |
| * If the value of the field is negative then an exception is thrown during formatting. |
| * <p> |
| * This method supports a special technique of parsing known as 'adjacent value parsing'. |
| * This technique solves the problem where a value, variable or fixed width, is followed by one or more |
| * fixed length values. The standard parser is greedy, and thus it would normally |
| * steal the digits that are needed by the fixed width value parsers that follow the |
| * variable width one. |
| * <p> |
| * No action is required to initiate 'adjacent value parsing'. |
| * When a call to {@code appendValue} is made, the builder |
| * enters adjacent value parsing setup mode. If the immediately subsequent method |
| * call or calls on the same builder are for a fixed width value, then the parser will reserve |
| * space so that the fixed width values can be parsed. |
| * <p> |
| * For example, consider {@code builder.appendValue(YEAR).appendValue(MONTH_OF_YEAR, 2);} |
| * The year is a variable width parse of between 1 and 19 digits. |
| * The month is a fixed width parse of 2 digits. |
| * Because these were appended to the same builder immediately after one another, |
| * the year parser will reserve two digits for the month to parse. |
| * Thus, the text '201106' will correctly parse to a year of 2011 and a month of 6. |
| * Without adjacent value parsing, the year would greedily parse all six digits and leave |
| * nothing for the month. |
| * <p> |
| * Adjacent value parsing applies to each set of fixed width not-negative values in the parser |
| * that immediately follow any kind of value, variable or fixed width. |
| * Calling any other append method will end the setup of adjacent value parsing. |
| * Thus, in the unlikely event that you need to avoid adjacent value parsing behavior, |
| * simply add the {@code appendValue} to another {@code DateTimeFormatterBuilder} |
| * and add that to this builder. |
| * <p> |
| * If adjacent parsing is active, then parsing must match exactly the specified |
| * number of digits in both strict and lenient modes. |
| * In addition, no positive or negative sign is permitted. |
| * |
| * @param field the field to append, not null |
| * @param width the width of the printed field, from 1 to 19 |
| * @return this, for chaining, not null |
| * @throws IllegalArgumentException if the width is invalid |
| */ |
| public DateTimeFormatterBuilder appendValue(TemporalField field, int width) { |
| Objects.requireNonNull(field, "field"); |
| if (width < 1 || width > 19) { |
| throw new IllegalArgumentException("The width must be from 1 to 19 inclusive but was " + width); |
| } |
| NumberPrinterParser pp = new NumberPrinterParser(field, width, width, SignStyle.NOT_NEGATIVE); |
| appendValue(pp); |
| return this; |
| } |
| |
| /** |
| * Appends the value of a date-time field to the formatter providing full |
| * control over formatting. |
| * <p> |
| * The value of the field will be output during a format. |
| * If the value cannot be obtained then an exception will be thrown. |
| * <p> |
| * This method provides full control of the numeric formatting, including |
| * zero-padding and the positive/negative sign. |
| * <p> |
| * The parser for a variable width value such as this normally behaves greedily, |
| * accepting as many digits as possible. |
| * This behavior can be affected by 'adjacent value parsing'. |
| * See {@link #appendValue(java.time.temporal.TemporalField, int)} for full details. |
| * <p> |
| * In strict parsing mode, the minimum number of parsed digits is {@code minWidth} |
| * and the maximum is {@code maxWidth}. |
| * In lenient parsing mode, the minimum number of parsed digits is one |
| * and the maximum is 19 (except as limited by adjacent value parsing). |
| * <p> |
| * If this method is invoked with equal minimum and maximum widths and a sign style of |
| * {@code NOT_NEGATIVE} then it delegates to {@code appendValue(TemporalField,int)}. |
| * In this scenario, the formatting and parsing behavior described there occur. |
| * |
| * @param field the field to append, not null |
| * @param minWidth the minimum field width of the printed field, from 1 to 19 |
| * @param maxWidth the maximum field width of the printed field, from 1 to 19 |
| * @param signStyle the positive/negative output style, not null |
| * @return this, for chaining, not null |
| * @throws IllegalArgumentException if the widths are invalid |
| */ |
| public DateTimeFormatterBuilder appendValue( |
| TemporalField field, int minWidth, int maxWidth, SignStyle signStyle) { |
| if (minWidth == maxWidth && signStyle == SignStyle.NOT_NEGATIVE) { |
| return appendValue(field, maxWidth); |
| } |
| Objects.requireNonNull(field, "field"); |
| Objects.requireNonNull(signStyle, "signStyle"); |
| if (minWidth < 1 || minWidth > 19) { |
| throw new IllegalArgumentException("The minimum width must be from 1 to 19 inclusive but was " + minWidth); |
| } |
| if (maxWidth < 1 || maxWidth > 19) { |
| throw new IllegalArgumentException("The maximum width must be from 1 to 19 inclusive but was " + maxWidth); |
| } |
| if (maxWidth < minWidth) { |
| throw new IllegalArgumentException("The maximum width must exceed or equal the minimum width but " + |
| maxWidth + " < " + minWidth); |
| } |
| NumberPrinterParser pp = new NumberPrinterParser(field, minWidth, maxWidth, signStyle); |
| appendValue(pp); |
| return this; |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Appends the reduced value of a date-time field to the formatter. |
| * <p> |
| * Since fields such as year vary by chronology, it is recommended to use the |
| * {@link #appendValueReduced(TemporalField, int, int, ChronoLocalDate)} date} |
| * variant of this method in most cases. This variant is suitable for |
| * simple fields or working with only the ISO chronology. |
| * <p> |
| * For formatting, the {@code width} and {@code maxWidth} are used to |
| * determine the number of characters to format. |
| * If they are equal then the format is fixed width. |
| * If the value of the field is within the range of the {@code baseValue} using |
| * {@code width} characters then the reduced value is formatted otherwise the value is |
| * truncated to fit {@code maxWidth}. |
| * The rightmost characters are output to match the width, left padding with zero. |
| * <p> |
| * For strict parsing, the number of characters allowed by {@code width} to {@code maxWidth} are parsed. |
| * For lenient parsing, the number of characters must be at least 1 and less than 10. |
| * If the number of digits parsed is equal to {@code width} and the value is positive, |
| * the value of the field is computed to be the first number greater than |
| * or equal to the {@code baseValue} with the same least significant characters, |
| * otherwise the value parsed is the field value. |
| * This allows a reduced value to be entered for values in range of the baseValue |
| * and width and absolute values can be entered for values outside the range. |
| * <p> |
| * For example, a base value of {@code 1980} and a width of {@code 2} will have |
| * valid values from {@code 1980} to {@code 2079}. |
| * During parsing, the text {@code "12"} will result in the value {@code 2012} as that |
| * is the value within the range where the last two characters are "12". |
| * By contrast, parsing the text {@code "1915"} will result in the value {@code 1915}. |
| * |
| * @param field the field to append, not null |
| * @param width the field width of the printed and parsed field, from 1 to 10 |
| * @param maxWidth the maximum field width of the printed field, from 1 to 10 |
| * @param baseValue the base value of the range of valid values |
| * @return this, for chaining, not null |
| * @throws IllegalArgumentException if the width or base value is invalid |
| */ |
| public DateTimeFormatterBuilder appendValueReduced(TemporalField field, |
| int width, int maxWidth, int baseValue) { |
| Objects.requireNonNull(field, "field"); |
| ReducedPrinterParser pp = new ReducedPrinterParser(field, width, maxWidth, baseValue, null); |
| appendValue(pp); |
| return this; |
| } |
| |
| /** |
| * Appends the reduced value of a date-time field to the formatter. |
| * <p> |
| * This is typically used for formatting and parsing a two digit year. |
| * <p> |
| * The base date is used to calculate the full value during parsing. |
| * For example, if the base date is 1950-01-01 then parsed values for |
| * a two digit year parse will be in the range 1950-01-01 to 2049-12-31. |
| * Only the year would be extracted from the date, thus a base date of |
| * 1950-08-25 would also parse to the range 1950-01-01 to 2049-12-31. |
| * This behavior is necessary to support fields such as week-based-year |
| * or other calendar systems where the parsed value does not align with |
| * standard ISO years. |
| * <p> |
| * The exact behavior is as follows. Parse the full set of fields and |
| * determine the effective chronology using the last chronology if |
| * it appears more than once. Then convert the base date to the |
| * effective chronology. Then extract the specified field from the |
| * chronology-specific base date and use it to determine the |
| * {@code baseValue} used below. |
| * <p> |
| * For formatting, the {@code width} and {@code maxWidth} are used to |
| * determine the number of characters to format. |
| * If they are equal then the format is fixed width. |
| * If the value of the field is within the range of the {@code baseValue} using |
| * {@code width} characters then the reduced value is formatted otherwise the value is |
| * truncated to fit {@code maxWidth}. |
| * The rightmost characters are output to match the width, left padding with zero. |
| * <p> |
| * For strict parsing, the number of characters allowed by {@code width} to {@code maxWidth} are parsed. |
| * For lenient parsing, the number of characters must be at least 1 and less than 10. |
| * If the number of digits parsed is equal to {@code width} and the value is positive, |
| * the value of the field is computed to be the first number greater than |
| * or equal to the {@code baseValue} with the same least significant characters, |
| * otherwise the value parsed is the field value. |
| * This allows a reduced value to be entered for values in range of the baseValue |
| * and width and absolute values can be entered for values outside the range. |
| * <p> |
| * For example, a base value of {@code 1980} and a width of {@code 2} will have |
| * valid values from {@code 1980} to {@code 2079}. |
| * During parsing, the text {@code "12"} will result in the value {@code 2012} as that |
| * is the value within the range where the last two characters are "12". |
| * By contrast, parsing the text {@code "1915"} will result in the value {@code 1915}. |
| * |
| * @param field the field to append, not null |
| * @param width the field width of the printed and parsed field, from 1 to 10 |
| * @param maxWidth the maximum field width of the printed field, from 1 to 10 |
| * @param baseDate the base date used to calculate the base value for the range |
| * of valid values in the parsed chronology, not null |
| * @return this, for chaining, not null |
| * @throws IllegalArgumentException if the width or base value is invalid |
| */ |
| public DateTimeFormatterBuilder appendValueReduced( |
| TemporalField field, int width, int maxWidth, ChronoLocalDate baseDate) { |
| Objects.requireNonNull(field, "field"); |
| Objects.requireNonNull(baseDate, "baseDate"); |
| ReducedPrinterParser pp = new ReducedPrinterParser(field, width, maxWidth, 0, baseDate); |
| appendValue(pp); |
| return this; |
| } |
| |
| /** |
| * Appends a fixed or variable width printer-parser handling adjacent value mode. |
| * If a PrinterParser is not active then the new PrinterParser becomes |
| * the active PrinterParser. |
| * Otherwise, the active PrinterParser is modified depending on the new PrinterParser. |
| * If the new PrinterParser is fixed width and has sign style {@code NOT_NEGATIVE} |
| * then its width is added to the active PP and |
| * the new PrinterParser is forced to be fixed width. |
| * If the new PrinterParser is variable width, the active PrinterParser is changed |
| * to be fixed width and the new PrinterParser becomes the active PP. |
| * |
| * @param pp the printer-parser, not null |
| * @return this, for chaining, not null |
| */ |
| private DateTimeFormatterBuilder appendValue(NumberPrinterParser pp) { |
| if (active.valueParserIndex >= 0) { |
| final int activeValueParser = active.valueParserIndex; |
| |
| // adjacent parsing mode, update setting in previous parsers |
| NumberPrinterParser basePP = (NumberPrinterParser) active.printerParsers.get(activeValueParser); |
| if (pp.minWidth == pp.maxWidth && pp.signStyle == SignStyle.NOT_NEGATIVE) { |
| // Append the width to the subsequentWidth of the active parser |
| basePP = basePP.withSubsequentWidth(pp.maxWidth); |
| // Append the new parser as a fixed width |
| appendInternal(pp.withFixedWidth()); |
| // Retain the previous active parser |
| active.valueParserIndex = activeValueParser; |
| } else { |
| // Modify the active parser to be fixed width |
| basePP = basePP.withFixedWidth(); |
| // The new parser becomes the mew active parser |
| active.valueParserIndex = appendInternal(pp); |
| } |
| // Replace the modified parser with the updated one |
| active.printerParsers.set(activeValueParser, basePP); |
| } else { |
| // The new Parser becomes the active parser |
| active.valueParserIndex = appendInternal(pp); |
| } |
| return this; |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Appends the fractional value of a date-time field to the formatter. |
| * <p> |
| * The fractional value of the field will be output including the |
| * preceding decimal point. The preceding value is not output. |
| * For example, the second-of-minute value of 15 would be output as {@code .25}. |
| * <p> |
| * The width of the printed fraction can be controlled. Setting the |
| * minimum width to zero will cause no output to be generated. |
| * The printed fraction will have the minimum width necessary between |
| * the minimum and maximum widths - trailing zeroes are omitted. |
| * No rounding occurs due to the maximum width - digits are simply dropped. |
| * <p> |
| * When parsing in strict mode, the number of parsed digits must be between |
| * the minimum and maximum width. When parsing in lenient mode, the minimum |
| * width is considered to be zero and the maximum is nine. |
| * <p> |
| * If the value cannot be obtained then an exception will be thrown. |
| * If the value is negative an exception will be thrown. |
| * If the field does not have a fixed set of valid values then an |
| * exception will be thrown. |
| * If the field value in the date-time to be printed is invalid it |
| * cannot be printed and an exception will be thrown. |
| * |
| * @param field the field to append, not null |
| * @param minWidth the minimum width of the field excluding the decimal point, from 0 to 9 |
| * @param maxWidth the maximum width of the field excluding the decimal point, from 1 to 9 |
| * @param decimalPoint whether to output the localized decimal point symbol |
| * @return this, for chaining, not null |
| * @throws IllegalArgumentException if the field has a variable set of valid values or |
| * either width is invalid |
| */ |
| public DateTimeFormatterBuilder appendFraction( |
| TemporalField field, int minWidth, int maxWidth, boolean decimalPoint) { |
| appendInternal(new FractionPrinterParser(field, minWidth, maxWidth, decimalPoint)); |
| return this; |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Appends the text of a date-time field to the formatter using the full |
| * text style. |
| * <p> |
| * The text of the field will be output during a format. |
| * The value must be within the valid range of the field. |
| * If the value cannot be obtained then an exception will be thrown. |
| * If the field has no textual representation, then the numeric value will be used. |
| * <p> |
| * The value will be printed as per the normal format of an integer value. |
| * Only negative numbers will be signed. No padding will be added. |
| * |
| * @param field the field to append, not null |
| * @return this, for chaining, not null |
| */ |
| public DateTimeFormatterBuilder appendText(TemporalField field) { |
| return appendText(field, TextStyle.FULL); |
| } |
| |
| /** |
| * Appends the text of a date-time field to the formatter. |
| * <p> |
| * The text of the field will be output during a format. |
| * The value must be within the valid range of the field. |
| * If the value cannot be obtained then an exception will be thrown. |
| * If the field has no textual representation, then the numeric value will be used. |
| * <p> |
| * The value will be printed as per the normal format of an integer value. |
| * Only negative numbers will be signed. No padding will be added. |
| * |
| * @param field the field to append, not null |
| * @param textStyle the text style to use, not null |
| * @return this, for chaining, not null |
| */ |
| public DateTimeFormatterBuilder appendText(TemporalField field, TextStyle textStyle) { |
| Objects.requireNonNull(field, "field"); |
| Objects.requireNonNull(textStyle, "textStyle"); |
| appendInternal(new TextPrinterParser(field, textStyle, DateTimeTextProvider.getInstance())); |
| return this; |
| } |
| |
| /** |
| * Appends the text of a date-time field to the formatter using the specified |
| * map to supply the text. |
| * <p> |
| * The standard text outputting methods use the localized text in the JDK. |
| * This method allows that text to be specified directly. |
| * The supplied map is not validated by the builder to ensure that formatting or |
| * parsing is possible, thus an invalid map may throw an error during later use. |
| * <p> |
| * Supplying the map of text provides considerable flexibility in formatting and parsing. |
| * For example, a legacy application might require or supply the months of the |
| * year as "JNY", "FBY", "MCH" etc. These do not match the standard set of text |
| * for localized month names. Using this method, a map can be created which |
| * defines the connection between each value and the text: |
| * <pre> |
| * Map<Long, String> map = new HashMap<>(); |
| * map.put(1L, "JNY"); |
| * map.put(2L, "FBY"); |
| * map.put(3L, "MCH"); |
| * ... |
| * builder.appendText(MONTH_OF_YEAR, map); |
| * </pre> |
| * <p> |
| * Other uses might be to output the value with a suffix, such as "1st", "2nd", "3rd", |
| * or as Roman numerals "I", "II", "III", "IV". |
| * <p> |
| * During formatting, the value is obtained and checked that it is in the valid range. |
| * If text is not available for the value then it is output as a number. |
| * During parsing, the parser will match against the map of text and numeric values. |
| * |
| * @param field the field to append, not null |
| * @param textLookup the map from the value to the text |
| * @return this, for chaining, not null |
| */ |
| public DateTimeFormatterBuilder appendText(TemporalField field, Map<Long, String> textLookup) { |
| Objects.requireNonNull(field, "field"); |
| Objects.requireNonNull(textLookup, "textLookup"); |
| Map<Long, String> copy = new LinkedHashMap<>(textLookup); |
| Map<TextStyle, Map<Long, String>> map = Collections.singletonMap(TextStyle.FULL, copy); |
| final LocaleStore store = new LocaleStore(map); |
| DateTimeTextProvider provider = new DateTimeTextProvider() { |
| @Override |
| public String getText(TemporalField field, long value, TextStyle style, Locale locale) { |
| return store.getText(value, style); |
| } |
| @Override |
| public Iterator<Entry<String, Long>> getTextIterator(TemporalField field, TextStyle style, Locale locale) { |
| return store.getTextIterator(style); |
| } |
| }; |
| appendInternal(new TextPrinterParser(field, TextStyle.FULL, provider)); |
| return this; |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Appends an instant using ISO-8601 to the formatter, formatting fractional |
| * digits in groups of three. |
| * <p> |
| * Instants have a fixed output format. |
| * They are converted to a date-time with a zone-offset of UTC and formatted |
| * using the standard ISO-8601 format. |
| * With this method, formatting nano-of-second outputs zero, three, six |
| * or nine digits digits as necessary. |
| * The localized decimal style is not used. |
| * <p> |
| * The instant is obtained using {@link ChronoField#INSTANT_SECONDS INSTANT_SECONDS} |
| * and optionally (@code NANO_OF_SECOND). The value of {@code INSTANT_SECONDS} |
| * may be outside the maximum range of {@code LocalDateTime}. |
| * <p> |
| * The {@linkplain ResolverStyle resolver style} has no effect on instant parsing. |
| * The end-of-day time of '24:00' is handled as midnight at the start of the following day. |
| * The leap-second time of '23:59:59' is handled to some degree, see |
| * {@link DateTimeFormatter#parsedLeapSecond()} for full details. |
| * <p> |
| * An alternative to this method is to format/parse the instant as a single |
| * epoch-seconds value. That is achieved using {@code appendValue(INSTANT_SECONDS)}. |
| * |
| * @return this, for chaining, not null |
| */ |
| public DateTimeFormatterBuilder appendInstant() { |
| appendInternal(new InstantPrinterParser(-2)); |
| return this; |
| } |
| |
| /** |
| * Appends an instant using ISO-8601 to the formatter with control over |
| * the number of fractional digits. |
| * <p> |
| * Instants have a fixed output format, although this method provides some |
| * control over the fractional digits. They are converted to a date-time |
| * with a zone-offset of UTC and printed using the standard ISO-8601 format. |
| * The localized decimal style is not used. |
| * <p> |
| * The {@code fractionalDigits} parameter allows the output of the fractional |
| * second to be controlled. Specifying zero will cause no fractional digits |
| * to be output. From 1 to 9 will output an increasing number of digits, using |
| * zero right-padding if necessary. The special value -1 is used to output as |
| * many digits as necessary to avoid any trailing zeroes. |
| * <p> |
| * When parsing in strict mode, the number of parsed digits must match the |
| * fractional digits. When parsing in lenient mode, any number of fractional |
| * digits from zero to nine are accepted. |
| * <p> |
| * The instant is obtained using {@link ChronoField#INSTANT_SECONDS INSTANT_SECONDS} |
| * and optionally (@code NANO_OF_SECOND). The value of {@code INSTANT_SECONDS} |
| * may be outside the maximum range of {@code LocalDateTime}. |
| * <p> |
| * The {@linkplain ResolverStyle resolver style} has no effect on instant parsing. |
| * The end-of-day time of '24:00' is handled as midnight at the start of the following day. |
| * The leap-second time of '23:59:60' is handled to some degree, see |
| * {@link DateTimeFormatter#parsedLeapSecond()} for full details. |
| * <p> |
| * An alternative to this method is to format/parse the instant as a single |
| * epoch-seconds value. That is achieved using {@code appendValue(INSTANT_SECONDS)}. |
| * |
| * @param fractionalDigits the number of fractional second digits to format with, |
| * from 0 to 9, or -1 to use as many digits as necessary |
| * @return this, for chaining, not null |
| */ |
| public DateTimeFormatterBuilder appendInstant(int fractionalDigits) { |
| if (fractionalDigits < -1 || fractionalDigits > 9) { |
| throw new IllegalArgumentException("The fractional digits must be from -1 to 9 inclusive but was " + fractionalDigits); |
| } |
| appendInternal(new InstantPrinterParser(fractionalDigits)); |
| return this; |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Appends the zone offset, such as '+01:00', to the formatter. |
| * <p> |
| * This appends an instruction to format/parse the offset ID to the builder. |
| * This is equivalent to calling {@code appendOffset("+HH:MM:ss", "Z")}. |
| * |
| * @return this, for chaining, not null |
| */ |
| public DateTimeFormatterBuilder appendOffsetId() { |
| appendInternal(OffsetIdPrinterParser.INSTANCE_ID_Z); |
| return this; |
| } |
| |
| /** |
| * Appends the zone offset, such as '+01:00', to the formatter. |
| * <p> |
| * This appends an instruction to format/parse the offset ID to the builder. |
| * <p> |
| * During formatting, the offset is obtained using a mechanism equivalent |
| * to querying the temporal with {@link TemporalQueries#offset()}. |
| * It will be printed using the format defined below. |
| * If the offset cannot be obtained then an exception is thrown unless the |
| * section of the formatter is optional. |
| * <p> |
| * During parsing, the offset is parsed using the format defined below. |
| * If the offset cannot be parsed then an exception is thrown unless the |
| * section of the formatter is optional. |
| * <p> |
| * The format of the offset is controlled by a pattern which must be one |
| * of the following: |
| * <ul> |
| * <li>{@code +HH} - hour only, ignoring minute and second |
| * <li>{@code +HHmm} - hour, with minute if non-zero, ignoring second, no colon |
| * <li>{@code +HH:mm} - hour, with minute if non-zero, ignoring second, with colon |
| * <li>{@code +HHMM} - hour and minute, ignoring second, no colon |
| * <li>{@code +HH:MM} - hour and minute, ignoring second, with colon |
| * <li>{@code +HHMMss} - hour and minute, with second if non-zero, no colon |
| * <li>{@code +HH:MM:ss} - hour and minute, with second if non-zero, with colon |
| * <li>{@code +HHMMSS} - hour, minute and second, no colon |
| * <li>{@code +HH:MM:SS} - hour, minute and second, with colon |
| * </ul> |
| * The "no offset" text controls what text is printed when the total amount of |
| * the offset fields to be output is zero. |
| * Example values would be 'Z', '+00:00', 'UTC' or 'GMT'. |
| * Three formats are accepted for parsing UTC - the "no offset" text, and the |
| * plus and minus versions of zero defined by the pattern. |
| * |
| * @param pattern the pattern to use, not null |
| * @param noOffsetText the text to use when the offset is zero, not null |
| * @return this, for chaining, not null |
| */ |
| public DateTimeFormatterBuilder appendOffset(String pattern, String noOffsetText) { |
| appendInternal(new OffsetIdPrinterParser(pattern, noOffsetText)); |
| return this; |
| } |
| |
| /** |
| * Appends the localized zone offset, such as 'GMT+01:00', to the formatter. |
| * <p> |
| * This appends a localized zone offset to the builder, the format of the |
| * localized offset is controlled by the specified {@link FormatStyle style} |
| * to this method: |
| * <ul> |
| * <li>{@link TextStyle#FULL full} - formats with localized offset text, such |
| * as 'GMT, 2-digit hour and minute field, optional second field if non-zero, |
| * and colon. |
| * <li>{@link TextStyle#SHORT short} - formats with localized offset text, |
| * such as 'GMT, hour without leading zero, optional 2-digit minute and |
| * second if non-zero, and colon. |
| * </ul> |
| * <p> |
| * During formatting, the offset is obtained using a mechanism equivalent |
| * to querying the temporal with {@link TemporalQueries#offset()}. |
| * If the offset cannot be obtained then an exception is thrown unless the |
| * section of the formatter is optional. |
| * <p> |
| * During parsing, the offset is parsed using the format defined above. |
| * If the offset cannot be parsed then an exception is thrown unless the |
| * section of the formatter is optional. |
| * <p> |
| * @param style the format style to use, not null |
| * @return this, for chaining, not null |
| * @throws IllegalArgumentException if style is neither {@link TextStyle#FULL |
| * full} nor {@link TextStyle#SHORT short} |
| */ |
| public DateTimeFormatterBuilder appendLocalizedOffset(TextStyle style) { |
| Objects.requireNonNull(style, "style"); |
| if (style != TextStyle.FULL && style != TextStyle.SHORT) { |
| throw new IllegalArgumentException("Style must be either full or short"); |
| } |
| appendInternal(new LocalizedOffsetIdPrinterParser(style)); |
| return this; |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Appends the time-zone ID, such as 'Europe/Paris' or '+02:00', to the formatter. |
| * <p> |
| * This appends an instruction to format/parse the zone ID to the builder. |
| * The zone ID is obtained in a strict manner suitable for {@code ZonedDateTime}. |
| * By contrast, {@code OffsetDateTime} does not have a zone ID suitable |
| * for use with this method, see {@link #appendZoneOrOffsetId()}. |
| * <p> |
| * During formatting, the zone is obtained using a mechanism equivalent |
| * to querying the temporal with {@link TemporalQueries#zoneId()}. |
| * It will be printed using the result of {@link ZoneId#getId()}. |
| * If the zone cannot be obtained then an exception is thrown unless the |
| * section of the formatter is optional. |
| * <p> |
| * During parsing, the text must match a known zone or offset. |
| * There are two types of zone ID, offset-based, such as '+01:30' and |
| * region-based, such as 'Europe/London'. These are parsed differently. |
| * If the parse starts with '+', '-', 'UT', 'UTC' or 'GMT', then the parser |
| * expects an offset-based zone and will not match region-based zones. |
| * The offset ID, such as '+02:30', may be at the start of the parse, |
| * or prefixed by 'UT', 'UTC' or 'GMT'. The offset ID parsing is |
| * equivalent to using {@link #appendOffset(String, String)} using the |
| * arguments 'HH:MM:ss' and the no offset string '0'. |
| * If the parse starts with 'UT', 'UTC' or 'GMT', and the parser cannot |
| * match a following offset ID, then {@link ZoneOffset#UTC} is selected. |
| * In all other cases, the list of known region-based zones is used to |
| * find the longest available match. If no match is found, and the parse |
| * starts with 'Z', then {@code ZoneOffset.UTC} is selected. |
| * The parser uses the {@linkplain #parseCaseInsensitive() case sensitive} setting. |
| * <p> |
| * For example, the following will parse: |
| * <pre> |
| * "Europe/London" -- ZoneId.of("Europe/London") |
| * "Z" -- ZoneOffset.UTC |
| * "UT" -- ZoneId.of("UT") |
| * "UTC" -- ZoneId.of("UTC") |
| * "GMT" -- ZoneId.of("GMT") |
| * "+01:30" -- ZoneOffset.of("+01:30") |
| * "UT+01:30" -- ZoneOffset.of("+01:30") |
| * "UTC+01:30" -- ZoneOffset.of("+01:30") |
| * "GMT+01:30" -- ZoneOffset.of("+01:30") |
| * </pre> |
| * |
| * @return this, for chaining, not null |
| * @see #appendZoneRegionId() |
| */ |
| public DateTimeFormatterBuilder appendZoneId() { |
| appendInternal(new ZoneIdPrinterParser(TemporalQueries.zoneId(), "ZoneId()")); |
| return this; |
| } |
| |
| /** |
| * Appends the time-zone region ID, such as 'Europe/Paris', to the formatter, |
| * rejecting the zone ID if it is a {@code ZoneOffset}. |
| * <p> |
| * This appends an instruction to format/parse the zone ID to the builder |
| * only if it is a region-based ID. |
| * <p> |
| * During formatting, the zone is obtained using a mechanism equivalent |
| * to querying the temporal with {@link TemporalQueries#zoneId()}. |
| * If the zone is a {@code ZoneOffset} or it cannot be obtained then |
| * an exception is thrown unless the section of the formatter is optional. |
| * If the zone is not an offset, then the zone will be printed using |
| * the zone ID from {@link ZoneId#getId()}. |
| * <p> |
| * During parsing, the text must match a known zone or offset. |
| * There are two types of zone ID, offset-based, such as '+01:30' and |
| * region-based, such as 'Europe/London'. These are parsed differently. |
| * If the parse starts with '+', '-', 'UT', 'UTC' or 'GMT', then the parser |
| * expects an offset-based zone and will not match region-based zones. |
| * The offset ID, such as '+02:30', may be at the start of the parse, |
| * or prefixed by 'UT', 'UTC' or 'GMT'. The offset ID parsing is |
| * equivalent to using {@link #appendOffset(String, String)} using the |
| * arguments 'HH:MM:ss' and the no offset string '0'. |
| * If the parse starts with 'UT', 'UTC' or 'GMT', and the parser cannot |
| * match a following offset ID, then {@link ZoneOffset#UTC} is selected. |
| * In all other cases, the list of known region-based zones is used to |
| * find the longest available match. If no match is found, and the parse |
| * starts with 'Z', then {@code ZoneOffset.UTC} is selected. |
| * The parser uses the {@linkplain #parseCaseInsensitive() case sensitive} setting. |
| * <p> |
| * For example, the following will parse: |
| * <pre> |
| * "Europe/London" -- ZoneId.of("Europe/London") |
| * "Z" -- ZoneOffset.UTC |
| * "UT" -- ZoneId.of("UT") |
| * "UTC" -- ZoneId.of("UTC") |
| * "GMT" -- ZoneId.of("GMT") |
| * "+01:30" -- ZoneOffset.of("+01:30") |
| * "UT+01:30" -- ZoneOffset.of("+01:30") |
| * "UTC+01:30" -- ZoneOffset.of("+01:30") |
| * "GMT+01:30" -- ZoneOffset.of("+01:30") |
| * </pre> |
| * <p> |
| * Note that this method is identical to {@code appendZoneId()} except |
| * in the mechanism used to obtain the zone. |
| * Note also that parsing accepts offsets, whereas formatting will never |
| * produce one. |
| * |
| * @return this, for chaining, not null |
| * @see #appendZoneId() |
| */ |
| public DateTimeFormatterBuilder appendZoneRegionId() { |
| appendInternal(new ZoneIdPrinterParser(QUERY_REGION_ONLY, "ZoneRegionId()")); |
| return this; |
| } |
| |
| /** |
| * Appends the time-zone ID, such as 'Europe/Paris' or '+02:00', to |
| * the formatter, using the best available zone ID. |
| * <p> |
| * This appends an instruction to format/parse the best available |
| * zone or offset ID to the builder. |
| * The zone ID is obtained in a lenient manner that first attempts to |
| * find a true zone ID, such as that on {@code ZonedDateTime}, and |
| * then attempts to find an offset, such as that on {@code OffsetDateTime}. |
| * <p> |
| * During formatting, the zone is obtained using a mechanism equivalent |
| * to querying the temporal with {@link TemporalQueries#zone()}. |
| * It will be printed using the result of {@link ZoneId#getId()}. |
| * If the zone cannot be obtained then an exception is thrown unless the |
| * section of the formatter is optional. |
| * <p> |
| * During parsing, the text must match a known zone or offset. |
| * There are two types of zone ID, offset-based, such as '+01:30' and |
| * region-based, such as 'Europe/London'. These are parsed differently. |
| * If the parse starts with '+', '-', 'UT', 'UTC' or 'GMT', then the parser |
| * expects an offset-based zone and will not match region-based zones. |
| * The offset ID, such as '+02:30', may be at the start of the parse, |
| * or prefixed by 'UT', 'UTC' or 'GMT'. The offset ID parsing is |
| * equivalent to using {@link #appendOffset(String, String)} using the |
| * arguments 'HH:MM:ss' and the no offset string '0'. |
| * If the parse starts with 'UT', 'UTC' or 'GMT', and the parser cannot |
| * match a following offset ID, then {@link ZoneOffset#UTC} is selected. |
| * In all other cases, the list of known region-based zones is used to |
| * find the longest available match. If no match is found, and the parse |
| * starts with 'Z', then {@code ZoneOffset.UTC} is selected. |
| * The parser uses the {@linkplain #parseCaseInsensitive() case sensitive} setting. |
| * <p> |
| * For example, the following will parse: |
| * <pre> |
| * "Europe/London" -- ZoneId.of("Europe/London") |
| * "Z" -- ZoneOffset.UTC |
| * "UT" -- ZoneId.of("UT") |
| * "UTC" -- ZoneId.of("UTC") |
| * "GMT" -- ZoneId.of("GMT") |
| * "+01:30" -- ZoneOffset.of("+01:30") |
| * "UT+01:30" -- ZoneOffset.of("UT+01:30") |
| * "UTC+01:30" -- ZoneOffset.of("UTC+01:30") |
| * "GMT+01:30" -- ZoneOffset.of("GMT+01:30") |
| * </pre> |
| * <p> |
| * Note that this method is identical to {@code appendZoneId()} except |
| * in the mechanism used to obtain the zone. |
| * |
| * @return this, for chaining, not null |
| * @see #appendZoneId() |
| */ |
| public DateTimeFormatterBuilder appendZoneOrOffsetId() { |
| appendInternal(new ZoneIdPrinterParser(TemporalQueries.zone(), "ZoneOrOffsetId()")); |
| return this; |
| } |
| |
| /** |
| * Appends the time-zone name, such as 'British Summer Time', to the formatter. |
| * <p> |
| * This appends an instruction to format/parse the textual name of the zone to |
| * the builder. |
| * <p> |
| * During formatting, the zone is obtained using a mechanism equivalent |
| * to querying the temporal with {@link TemporalQueries#zoneId()}. |
| * If the zone is a {@code ZoneOffset} it will be printed using the |
| * result of {@link ZoneOffset#getId()}. |
| * If the zone is not an offset, the textual name will be looked up |
| * for the locale set in the {@link DateTimeFormatter}. |
| * If the temporal object being printed represents an instant, then the text |
| * will be the summer or winter time text as appropriate. |
| * If the lookup for text does not find any suitable result, then the |
| * {@link ZoneId#getId() ID} will be printed instead. |
| * If the zone cannot be obtained then an exception is thrown unless the |
| * section of the formatter is optional. |
| * <p> |
| * During parsing, either the textual zone name, the zone ID or the offset |
| * is accepted. Many textual zone names are not unique, such as CST can be |
| * for both "Central Standard Time" and "China Standard Time". In this |
| * situation, the zone id will be determined by the region information from |
| * formatter's {@link DateTimeFormatter#getLocale() locale} and the standard |
| * zone id for that area, for example, America/New_York for the America Eastern |
| * zone. The {@link #appendZoneText(TextStyle, Set)} may be used |
| * to specify a set of preferred {@link ZoneId} in this situation. |
| * |
| * @param textStyle the text style to use, not null |
| * @return this, for chaining, not null |
| */ |
| public DateTimeFormatterBuilder appendZoneText(TextStyle textStyle) { |
| appendInternal(new ZoneTextPrinterParser(textStyle, null)); |
| return this; |
| } |
| |
| /** |
| * Appends the time-zone name, such as 'British Summer Time', to the formatter. |
| * <p> |
| * This appends an instruction to format/parse the textual name of the zone to |
| * the builder. |
| * <p> |
| * During formatting, the zone is obtained using a mechanism equivalent |
| * to querying the temporal with {@link TemporalQueries#zoneId()}. |
| * If the zone is a {@code ZoneOffset} it will be printed using the |
| * result of {@link ZoneOffset#getId()}. |
| * If the zone is not an offset, the textual name will be looked up |
| * for the locale set in the {@link DateTimeFormatter}. |
| * If the temporal object being printed represents an instant, then the text |
| * will be the summer or winter time text as appropriate. |
| * If the lookup for text does not find any suitable result, then the |
| * {@link ZoneId#getId() ID} will be printed instead. |
| * If the zone cannot be obtained then an exception is thrown unless the |
| * section of the formatter is optional. |
| * <p> |
| * During parsing, either the textual zone name, the zone ID or the offset |
| * is accepted. Many textual zone names are not unique, such as CST can be |
| * for both "Central Standard Time" and "China Standard Time". In this |
| * situation, the zone id will be determined by the region information from |
| * formatter's {@link DateTimeFormatter#getLocale() locale} and the standard |
| * zone id for that area, for example, America/New_York for the America Eastern |
| * zone. This method also allows a set of preferred {@link ZoneId} to be |
| * specified for parsing. The matched preferred zone id will be used if the |
| * textural zone name being parsed is not unique. |
| * <p> |
| * If the zone cannot be parsed then an exception is thrown unless the |
| * section of the formatter is optional. |
| * |
| * @param textStyle the text style to use, not null |
| * @param preferredZones the set of preferred zone ids, not null |
| * @return this, for chaining, not null |
| */ |
| public DateTimeFormatterBuilder appendZoneText(TextStyle textStyle, |
| Set<ZoneId> preferredZones) { |
| Objects.requireNonNull(preferredZones, "preferredZones"); |
| appendInternal(new ZoneTextPrinterParser(textStyle, preferredZones)); |
| return this; |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Appends the chronology ID, such as 'ISO' or 'ThaiBuddhist', to the formatter. |
| * <p> |
| * This appends an instruction to format/parse the chronology ID to the builder. |
| * <p> |
| * During formatting, the chronology is obtained using a mechanism equivalent |
| * to querying the temporal with {@link TemporalQueries#chronology()}. |
| * It will be printed using the result of {@link Chronology#getId()}. |
| * If the chronology cannot be obtained then an exception is thrown unless the |
| * section of the formatter is optional. |
| * <p> |
| * During parsing, the chronology is parsed and must match one of the chronologies |
| * in {@link Chronology#getAvailableChronologies()}. |
| * If the chronology cannot be parsed then an exception is thrown unless the |
| * section of the formatter is optional. |
| * The parser uses the {@linkplain #parseCaseInsensitive() case sensitive} setting. |
| * |
| * @return this, for chaining, not null |
| */ |
| public DateTimeFormatterBuilder appendChronologyId() { |
| appendInternal(new ChronoPrinterParser(null)); |
| return this; |
| } |
| |
| /** |
| * Appends the chronology name to the formatter. |
| * <p> |
| * The calendar system name will be output during a format. |
| * If the chronology cannot be obtained then an exception will be thrown. |
| * |
| * @param textStyle the text style to use, not null |
| * @return this, for chaining, not null |
| */ |
| public DateTimeFormatterBuilder appendChronologyText(TextStyle textStyle) { |
| Objects.requireNonNull(textStyle, "textStyle"); |
| appendInternal(new ChronoPrinterParser(textStyle)); |
| return this; |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Appends a localized date-time pattern to the formatter. |
| * <p> |
| * This appends a localized section to the builder, suitable for outputting |
| * a date, time or date-time combination. The format of the localized |
| * section is lazily looked up based on four items: |
| * <ul> |
| * <li>the {@code dateStyle} specified to this method |
| * <li>the {@code timeStyle} specified to this method |
| * <li>the {@code Locale} of the {@code DateTimeFormatter} |
| * <li>the {@code Chronology}, selecting the best available |
| * </ul> |
| * During formatting, the chronology is obtained from the temporal object |
| * being formatted, which may have been overridden by |
| * {@link DateTimeFormatter#withChronology(Chronology)}. |
| * <p> |
| * During parsing, if a chronology has already been parsed, then it is used. |
| * Otherwise the default from {@code DateTimeFormatter.withChronology(Chronology)} |
| * is used, with {@code IsoChronology} as the fallback. |
| * <p> |
| * Note that this method provides similar functionality to methods on |
| * {@code DateFormat} such as {@link java.text.DateFormat#getDateTimeInstance(int, int)}. |
| * |
| * @param dateStyle the date style to use, null means no date required |
| * @param timeStyle the time style to use, null means no time required |
| * @return this, for chaining, not null |
| * @throws IllegalArgumentException if both the date and time styles are null |
| */ |
| public DateTimeFormatterBuilder appendLocalized(FormatStyle dateStyle, FormatStyle timeStyle) { |
| if (dateStyle == null && timeStyle == null) { |
| throw new IllegalArgumentException("Either the date or time style must be non-null"); |
| } |
| appendInternal(new LocalizedPrinterParser(dateStyle, timeStyle)); |
| return this; |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Appends a character literal to the formatter. |
| * <p> |
| * This character will be output during a format. |
| * |
| * @param literal the literal to append, not null |
| * @return this, for chaining, not null |
| */ |
| public DateTimeFormatterBuilder appendLiteral(char literal) { |
| appendInternal(new CharLiteralPrinterParser(literal)); |
| return this; |
| } |
| |
| /** |
| * Appends a string literal to the formatter. |
| * <p> |
| * This string will be output during a format. |
| * <p> |
| * If the literal is empty, nothing is added to the formatter. |
| * |
| * @param literal the literal to append, not null |
| * @return this, for chaining, not null |
| */ |
| public DateTimeFormatterBuilder appendLiteral(String literal) { |
| Objects.requireNonNull(literal, "literal"); |
| if (literal.length() > 0) { |
| if (literal.length() == 1) { |
| appendInternal(new CharLiteralPrinterParser(literal.charAt(0))); |
| } else { |
| appendInternal(new StringLiteralPrinterParser(literal)); |
| } |
| } |
| return this; |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Appends all the elements of a formatter to the builder. |
| * <p> |
| * This method has the same effect as appending each of the constituent |
| * parts of the formatter directly to this builder. |
| * |
| * @param formatter the formatter to add, not null |
| * @return this, for chaining, not null |
| */ |
| public DateTimeFormatterBuilder append(DateTimeFormatter formatter) { |
| Objects.requireNonNull(formatter, "formatter"); |
| appendInternal(formatter.toPrinterParser(false)); |
| return this; |
| } |
| |
| /** |
| * Appends a formatter to the builder which will optionally format/parse. |
| * <p> |
| * This method has the same effect as appending each of the constituent |
| * parts directly to this builder surrounded by an {@link #optionalStart()} and |
| * {@link #optionalEnd()}. |
| * <p> |
| * The formatter will format if data is available for all the fields contained within it. |
| * The formatter will parse if the string matches, otherwise no error is returned. |
| * |
| * @param formatter the formatter to add, not null |
| * @return this, for chaining, not null |
| */ |
| public DateTimeFormatterBuilder appendOptional(DateTimeFormatter formatter) { |
| Objects.requireNonNull(formatter, "formatter"); |
| appendInternal(formatter.toPrinterParser(true)); |
| return this; |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Appends the elements defined by the specified pattern to the builder. |
| * <p> |
| * All letters 'A' to 'Z' and 'a' to 'z' are reserved as pattern letters. |
| * The characters '#', '{' and '}' are reserved for future use. |
| * The characters '[' and ']' indicate optional patterns. |
| * The following pattern letters are defined: |
| * <pre> |
| * Symbol Meaning Presentation Examples |
| * ------ ------- ------------ ------- |
| * G era text AD; Anno Domini; A |
| * u year year 2004; 04 |
| * y year-of-era year 2004; 04 |
| * D day-of-year number 189 |
| * M/L month-of-year number/text 7; 07; Jul; July; J |
| * d day-of-month number 10 |
| * |
| * Q/q quarter-of-year number/text 3; 03; Q3; 3rd quarter |
| * Y week-based-year year 1996; 96 |
| * w week-of-week-based-year number 27 |
| * W week-of-month number 4 |
| * E day-of-week text Tue; Tuesday; T |
| * e/c localized day-of-week number/text 2; 02; Tue; Tuesday; T |
| * F week-of-month number 3 |
| * |
| * a am-pm-of-day text PM |
| * h clock-hour-of-am-pm (1-12) number 12 |
| * K hour-of-am-pm (0-11) number 0 |
| * k clock-hour-of-am-pm (1-24) number 0 |
| * |
| * H hour-of-day (0-23) number 0 |
| * m minute-of-hour number 30 |
| * s second-of-minute number 55 |
| * S fraction-of-second fraction 978 |
| * A milli-of-day number 1234 |
| * n nano-of-second number 987654321 |
| * N nano-of-day number 1234000000 |
| * |
| * V time-zone ID zone-id America/Los_Angeles; Z; -08:30 |
| * z time-zone name zone-name Pacific Standard Time; PST |
| * O localized zone-offset offset-O GMT+8; GMT+08:00; UTC-08:00; |
| * X zone-offset 'Z' for zero offset-X Z; -08; -0830; -08:30; -083015; -08:30:15; |
| * x zone-offset offset-x +0000; -08; -0830; -08:30; -083015; -08:30:15; |
| * Z zone-offset offset-Z +0000; -0800; -08:00; |
| * |
| * p pad next pad modifier 1 |
| * |
| * ' escape for text delimiter |
| * '' single quote literal ' |
| * [ optional section start |
| * ] optional section end |
| * # reserved for future use |
| * { reserved for future use |
| * } reserved for future use |
| * </pre> |
| * <p> |
| * The count of pattern letters determine the format. |
| * See <a href="DateTimeFormatter.html#patterns">DateTimeFormatter</a> for a user-focused description of the patterns. |
| * The following tables define how the pattern letters map to the builder. |
| * <p> |
| * <b>Date fields</b>: Pattern letters to output a date. |
| * <pre> |
| * Pattern Count Equivalent builder methods |
| * ------- ----- -------------------------- |
| * G 1 appendText(ChronoField.ERA, TextStyle.SHORT) |
| * GG 2 appendText(ChronoField.ERA, TextStyle.SHORT) |
| * GGG 3 appendText(ChronoField.ERA, TextStyle.SHORT) |
| * GGGG 4 appendText(ChronoField.ERA, TextStyle.FULL) |
| * GGGGG 5 appendText(ChronoField.ERA, TextStyle.NARROW) |
| * |
| * u 1 appendValue(ChronoField.YEAR, 1, 19, SignStyle.NORMAL); |
| * uu 2 appendValueReduced(ChronoField.YEAR, 2, 2000); |
| * uuu 3 appendValue(ChronoField.YEAR, 3, 19, SignStyle.NORMAL); |
| * u..u 4..n appendValue(ChronoField.YEAR, n, 19, SignStyle.EXCEEDS_PAD); |
| * y 1 appendValue(ChronoField.YEAR_OF_ERA, 1, 19, SignStyle.NORMAL); |
| * yy 2 appendValueReduced(ChronoField.YEAR_OF_ERA, 2, 2000); |
| * yyy 3 appendValue(ChronoField.YEAR_OF_ERA, 3, 19, SignStyle.NORMAL); |
| * y..y 4..n appendValue(ChronoField.YEAR_OF_ERA, n, 19, SignStyle.EXCEEDS_PAD); |
| * Y 1 append special localized WeekFields element for numeric week-based-year |
| * YY 2 append special localized WeekFields element for reduced numeric week-based-year 2 digits; |
| * YYY 3 append special localized WeekFields element for numeric week-based-year (3, 19, SignStyle.NORMAL); |
| * Y..Y 4..n append special localized WeekFields element for numeric week-based-year (n, 19, SignStyle.EXCEEDS_PAD); |
| * |
| * Q 1 appendValue(IsoFields.QUARTER_OF_YEAR); |
| * QQ 2 appendValue(IsoFields.QUARTER_OF_YEAR, 2); |
| * QQQ 3 appendText(IsoFields.QUARTER_OF_YEAR, TextStyle.SHORT) |
| * QQQQ 4 appendText(IsoFields.QUARTER_OF_YEAR, TextStyle.FULL) |
| * QQQQQ 5 appendText(IsoFields.QUARTER_OF_YEAR, TextStyle.NARROW) |
| * q 1 appendValue(IsoFields.QUARTER_OF_YEAR); |
| * qq 2 appendValue(IsoFields.QUARTER_OF_YEAR, 2); |
| * qqq 3 appendText(IsoFields.QUARTER_OF_YEAR, TextStyle.SHORT_STANDALONE) |
| * qqqq 4 appendText(IsoFields.QUARTER_OF_YEAR, TextStyle.FULL_STANDALONE) |
| * qqqqq 5 appendText(IsoFields.QUARTER_OF_YEAR, TextStyle.NARROW_STANDALONE) |
| * |
| * M 1 appendValue(ChronoField.MONTH_OF_YEAR); |
| * MM 2 appendValue(ChronoField.MONTH_OF_YEAR, 2); |
| * MMM 3 appendText(ChronoField.MONTH_OF_YEAR, TextStyle.SHORT) |
| * MMMM 4 appendText(ChronoField.MONTH_OF_YEAR, TextStyle.FULL) |
| * MMMMM 5 appendText(ChronoField.MONTH_OF_YEAR, TextStyle.NARROW) |
| * L 1 appendValue(ChronoField.MONTH_OF_YEAR); |
| * LL 2 appendValue(ChronoField.MONTH_OF_YEAR, 2); |
| * LLL 3 appendText(ChronoField.MONTH_OF_YEAR, TextStyle.SHORT_STANDALONE) |
| * LLLL 4 appendText(ChronoField.MONTH_OF_YEAR, TextStyle.FULL_STANDALONE) |
| * LLLLL 5 appendText(ChronoField.MONTH_OF_YEAR, TextStyle.NARROW_STANDALONE) |
| * |
| * w 1 append special localized WeekFields element for numeric week-of-year |
| * ww 2 append special localized WeekFields element for numeric week-of-year, zero-padded |
| * W 1 append special localized WeekFields element for numeric week-of-month |
| * d 1 appendValue(ChronoField.DAY_OF_MONTH) |
| * dd 2 appendValue(ChronoField.DAY_OF_MONTH, 2) |
| * D 1 appendValue(ChronoField.DAY_OF_YEAR) |
| * DD 2 appendValue(ChronoField.DAY_OF_YEAR, 2) |
| * DDD 3 appendValue(ChronoField.DAY_OF_YEAR, 3) |
| * F 1 appendValue(ChronoField.ALIGNED_DAY_OF_WEEK_IN_MONTH) |
| * E 1 appendText(ChronoField.DAY_OF_WEEK, TextStyle.SHORT) |
| * EE 2 appendText(ChronoField.DAY_OF_WEEK, TextStyle.SHORT) |
| * EEE 3 appendText(ChronoField.DAY_OF_WEEK, TextStyle.SHORT) |
| * EEEE 4 appendText(ChronoField.DAY_OF_WEEK, TextStyle.FULL) |
| * EEEEE 5 appendText(ChronoField.DAY_OF_WEEK, TextStyle.NARROW) |
| * e 1 append special localized WeekFields element for numeric day-of-week |
| * ee 2 append special localized WeekFields element for numeric day-of-week, zero-padded |
| * eee 3 appendText(ChronoField.DAY_OF_WEEK, TextStyle.SHORT) |
| * eeee 4 appendText(ChronoField.DAY_OF_WEEK, TextStyle.FULL) |
| * eeeee 5 appendText(ChronoField.DAY_OF_WEEK, TextStyle.NARROW) |
| * c 1 append special localized WeekFields element for numeric day-of-week |
| * ccc 3 appendText(ChronoField.DAY_OF_WEEK, TextStyle.SHORT_STANDALONE) |
| * cccc 4 appendText(ChronoField.DAY_OF_WEEK, TextStyle.FULL_STANDALONE) |
| * ccccc 5 appendText(ChronoField.DAY_OF_WEEK, TextStyle.NARROW_STANDALONE) |
| * </pre> |
| * <p> |
| * <b>Time fields</b>: Pattern letters to output a time. |
| * <pre> |
| * Pattern Count Equivalent builder methods |
| * ------- ----- -------------------------- |
| * a 1 appendText(ChronoField.AMPM_OF_DAY, TextStyle.SHORT) |
| * h 1 appendValue(ChronoField.CLOCK_HOUR_OF_AMPM) |
| * hh 2 appendValue(ChronoField.CLOCK_HOUR_OF_AMPM, 2) |
| * H 1 appendValue(ChronoField.HOUR_OF_DAY) |
| * HH 2 appendValue(ChronoField.HOUR_OF_DAY, 2) |
| * k 1 appendValue(ChronoField.CLOCK_HOUR_OF_DAY) |
| * kk 2 appendValue(ChronoField.CLOCK_HOUR_OF_DAY, 2) |
| * K 1 appendValue(ChronoField.HOUR_OF_AMPM) |
| * KK 2 appendValue(ChronoField.HOUR_OF_AMPM, 2) |
| * m 1 appendValue(ChronoField.MINUTE_OF_HOUR) |
| * mm 2 appendValue(ChronoField.MINUTE_OF_HOUR, 2) |
| * s 1 appendValue(ChronoField.SECOND_OF_MINUTE) |
| * ss 2 appendValue(ChronoField.SECOND_OF_MINUTE, 2) |
| * |
| * S..S 1..n appendFraction(ChronoField.NANO_OF_SECOND, n, n, false) |
| * A 1 appendValue(ChronoField.MILLI_OF_DAY) |
| * A..A 2..n appendValue(ChronoField.MILLI_OF_DAY, n) |
| * n 1 appendValue(ChronoField.NANO_OF_SECOND) |
| * n..n 2..n appendValue(ChronoField.NANO_OF_SECOND, n) |
| * N 1 appendValue(ChronoField.NANO_OF_DAY) |
| * N..N 2..n appendValue(ChronoField.NANO_OF_DAY, n) |
| * </pre> |
| * <p> |
| * <b>Zone ID</b>: Pattern letters to output {@code ZoneId}. |
| * <pre> |
| * Pattern Count Equivalent builder methods |
| * ------- ----- -------------------------- |
| * VV 2 appendZoneId() |
| * z 1 appendZoneText(TextStyle.SHORT) |
| * zz 2 appendZoneText(TextStyle.SHORT) |
| * zzz 3 appendZoneText(TextStyle.SHORT) |
| * zzzz 4 appendZoneText(TextStyle.FULL) |
| * </pre> |
| * <p> |
| * <b>Zone offset</b>: Pattern letters to output {@code ZoneOffset}. |
| * <pre> |
| * Pattern Count Equivalent builder methods |
| * ------- ----- -------------------------- |
| * O 1 appendLocalizedOffsetPrefixed(TextStyle.SHORT); |
| * OOOO 4 appendLocalizedOffsetPrefixed(TextStyle.FULL); |
| * X 1 appendOffset("+HHmm","Z") |
| * XX 2 appendOffset("+HHMM","Z") |
| * XXX 3 appendOffset("+HH:MM","Z") |
| * XXXX 4 appendOffset("+HHMMss","Z") |
| * XXXXX 5 appendOffset("+HH:MM:ss","Z") |
| * x 1 appendOffset("+HHmm","+00") |
| * xx 2 appendOffset("+HHMM","+0000") |
| * xxx 3 appendOffset("+HH:MM","+00:00") |
| * xxxx 4 appendOffset("+HHMMss","+0000") |
| * xxxxx 5 appendOffset("+HH:MM:ss","+00:00") |
| * Z 1 appendOffset("+HHMM","+0000") |
| * ZZ 2 appendOffset("+HHMM","+0000") |
| * ZZZ 3 appendOffset("+HHMM","+0000") |
| * ZZZZ 4 appendLocalizedOffset(TextStyle.FULL); |
| * ZZZZZ 5 appendOffset("+HH:MM:ss","Z") |
| * </pre> |
| * <p> |
| * <b>Modifiers</b>: Pattern letters that modify the rest of the pattern: |
| * <pre> |
| * Pattern Count Equivalent builder methods |
| * ------- ----- -------------------------- |
| * [ 1 optionalStart() |
| * ] 1 optionalEnd() |
| * p..p 1..n padNext(n) |
| * </pre> |
| * <p> |
| * Any sequence of letters not specified above, unrecognized letter or |
| * reserved character will throw an exception. |
| * Future versions may add to the set of patterns. |
| * It is recommended to use single quotes around all characters that you want |
| * to output directly to ensure that future changes do not break your application. |
| * <p> |
| * Note that the pattern string is similar, but not identical, to |
| * {@link java.text.SimpleDateFormat SimpleDateFormat}. |
| * The pattern string is also similar, but not identical, to that defined by the |
| * Unicode Common Locale Data Repository (CLDR/LDML). |
| * Pattern letters 'X' and 'u' are aligned with Unicode CLDR/LDML. |
| * By contrast, {@code SimpleDateFormat} uses 'u' for the numeric day of week. |
| * Pattern letters 'y' and 'Y' parse years of two digits and more than 4 digits differently. |
| * Pattern letters 'n', 'A', 'N', and 'p' are added. |
| * Number types will reject large numbers. |
| * |
| * @param pattern the pattern to add, not null |
| * @return this, for chaining, not null |
| * @throws IllegalArgumentException if the pattern is invalid |
| */ |
| public DateTimeFormatterBuilder appendPattern(String pattern) { |
| Objects.requireNonNull(pattern, "pattern"); |
| parsePattern(pattern); |
| return this; |
| } |
| |
| private void parsePattern(String pattern) { |
| for (int pos = 0; pos < pattern.length(); pos++) { |
| char cur = pattern.charAt(pos); |
| if ((cur >= 'A' && cur <= 'Z') || (cur >= 'a' && cur <= 'z')) { |
| int start = pos++; |
| for ( ; pos < pattern.length() && pattern.charAt(pos) == cur; pos++); // short loop |
| int count = pos - start; |
| // padding |
| if (cur == 'p') { |
| int pad = 0; |
| if (pos < pattern.length()) { |
| cur = pattern.charAt(pos); |
| if ((cur >= 'A' && cur <= 'Z') || (cur >= 'a' && cur <= 'z')) { |
| pad = count; |
| start = pos++; |
| for ( ; pos < pattern.length() && pattern.charAt(pos) == cur; pos++); // short loop |
| count = pos - start; |
| } |
| } |
| if (pad == 0) { |
| throw new IllegalArgumentException( |
| "Pad letter 'p' must be followed by valid pad pattern: " + pattern); |
| } |
| padNext(pad); // pad and continue parsing |
| } |
| // main rules |
| TemporalField field = FIELD_MAP.get(cur); |
| if (field != null) { |
| parseField(cur, count, field); |
| } else if (cur == 'z') { |
| if (count > 4) { |
| throw new IllegalArgumentException("Too many pattern letters: " + cur); |
| } else if (count == 4) { |
| appendZoneText(TextStyle.FULL); |
| } else { |
| appendZoneText(TextStyle.SHORT); |
| } |
| } else if (cur == 'V') { |
| if (count != 2) { |
| throw new IllegalArgumentException("Pattern letter count must be 2: " + cur); |
| } |
| appendZoneId(); |
| } else if (cur == 'Z') { |
| if (count < 4) { |
| appendOffset("+HHMM", "+0000"); |
| } else if (count == 4) { |
| appendLocalizedOffset(TextStyle.FULL); |
| } else if (count == 5) { |
| appendOffset("+HH:MM:ss","Z"); |
| } else { |
| throw new IllegalArgumentException("Too many pattern letters: " + cur); |
| } |
| } else if (cur == 'O') { |
| if (count == 1) { |
| appendLocalizedOffset(TextStyle.SHORT); |
| } else if (count == 4) { |
| appendLocalizedOffset(TextStyle.FULL); |
| } else { |
| throw new IllegalArgumentException("Pattern letter count must be 1 or 4: " + cur); |
| } |
| } else if (cur == 'X') { |
| if (count > 5) { |
| throw new IllegalArgumentException("Too many pattern letters: " + cur); |
| } |
| appendOffset(OffsetIdPrinterParser.PATTERNS[count + (count == 1 ? 0 : 1)], "Z"); |
| } else if (cur == 'x') { |
| if (count > 5) { |
| throw new IllegalArgumentException("Too many pattern letters: " + cur); |
| } |
| String zero = (count == 1 ? "+00" : (count % 2 == 0 ? "+0000" : "+00:00")); |
| appendOffset(OffsetIdPrinterParser.PATTERNS[count + (count == 1 ? 0 : 1)], zero); |
| } else if (cur == 'W') { |
| // Fields defined by Locale |
| if (count > 1) { |
| throw new IllegalArgumentException("Too many pattern letters: " + cur); |
| } |
| appendInternal(new WeekBasedFieldPrinterParser(cur, count)); |
| } else if (cur == 'w') { |
| // Fields defined by Locale |
| if (count > 2) { |
| throw new IllegalArgumentException("Too many pattern letters: " + cur); |
| } |
| appendInternal(new WeekBasedFieldPrinterParser(cur, count)); |
| } else if (cur == 'Y') { |
| // Fields defined by Locale |
| appendInternal(new WeekBasedFieldPrinterParser(cur, count)); |
| } else { |
| throw new IllegalArgumentException("Unknown pattern letter: " + cur); |
| } |
| pos--; |
| |
| } else if (cur == '\'') { |
| // parse literals |
| int start = pos++; |
| for ( ; pos < pattern.length(); pos++) { |
| if (pattern.charAt(pos) == '\'') { |
| if (pos + 1 < pattern.length() && pattern.charAt(pos + 1) == '\'') { |
| pos++; |
| } else { |
| break; // end of literal |
| } |
| } |
| } |
| if (pos >= pattern.length()) { |
| throw new IllegalArgumentException("Pattern ends with an incomplete string literal: " + pattern); |
| } |
| String str = pattern.substring(start + 1, pos); |
| if (str.length() == 0) { |
| appendLiteral('\''); |
| } else { |
| appendLiteral(str.replace("''", "'")); |
| } |
| |
| } else if (cur == '[') { |
| optionalStart(); |
| |
| } else if (cur == ']') { |
| if (active.parent == null) { |
| throw new IllegalArgumentException("Pattern invalid as it contains ] without previous ["); |
| } |
| optionalEnd(); |
| |
| } else if (cur == '{' || cur == '}' || cur == '#') { |
| throw new IllegalArgumentException("Pattern includes reserved character: '" + cur + "'"); |
| } else { |
| appendLiteral(cur); |
| } |
| } |
| } |
| |
| @SuppressWarnings("fallthrough") |
| private void parseField(char cur, int count, TemporalField field) { |
| boolean standalone = false; |
| switch (cur) { |
| case 'u': |
| case 'y': |
| if (count == 2) { |
| appendValueReduced(field, 2, 2, ReducedPrinterParser.BASE_DATE); |
| } else if (count < 4) { |
| appendValue(field, count, 19, SignStyle.NORMAL); |
| } else { |
| appendValue(field, count, 19, SignStyle.EXCEEDS_PAD); |
| } |
| break; |
| case 'c': |
| if (count == 2) { |
| throw new IllegalArgumentException("Invalid pattern \"cc\""); |
| } |
| /*fallthrough*/ |
| case 'L': |
| case 'q': |
| standalone = true; |
| /*fallthrough*/ |
| case 'M': |
| case 'Q': |
| case 'E': |
| case 'e': |
| switch (count) { |
| case 1: |
| case 2: |
| if (cur == 'c' || cur == 'e') { |
| appendInternal(new WeekBasedFieldPrinterParser(cur, count)); |
| } else if (cur == 'E') { |
| appendText(field, TextStyle.SHORT); |
| } else { |
| if (count == 1) { |
| appendValue(field); |
| } else { |
| appendValue(field, 2); |
| } |
| } |
| break; |
| case 3: |
| appendText(field, standalone ? TextStyle.SHORT_STANDALONE : TextStyle.SHORT); |
| break; |
| case 4: |
| appendText(field, standalone ? TextStyle.FULL_STANDALONE : TextStyle.FULL); |
| break; |
| case 5: |
| appendText(field, standalone ? TextStyle.NARROW_STANDALONE : TextStyle.NARROW); |
| break; |
| default: |
| throw new IllegalArgumentException("Too many pattern letters: " + cur); |
| } |
| break; |
| case 'a': |
| if (count == 1) { |
| appendText(field, TextStyle.SHORT); |
| } else { |
| throw new IllegalArgumentException("Too many pattern letters: " + cur); |
| } |
| break; |
| case 'G': |
| switch (count) { |
| case 1: |
| case 2: |
| case 3: |
| appendText(field, TextStyle.SHORT); |
| break; |
| case 4: |
| appendText(field, TextStyle.FULL); |
| break; |
| case 5: |
| appendText(field, TextStyle.NARROW); |
| break; |
| default: |
| throw new IllegalArgumentException("Too many pattern letters: " + cur); |
| } |
| break; |
| case 'S': |
| appendFraction(NANO_OF_SECOND, count, count, false); |
| break; |
| case 'F': |
| if (count == 1) { |
| appendValue(field); |
| } else { |
| throw new IllegalArgumentException("Too many pattern letters: " + cur); |
| } |
| break; |
| case 'd': |
| case 'h': |
| case 'H': |
| case 'k': |
| case 'K': |
| case 'm': |
| case 's': |
| if (count == 1) { |
| appendValue(field); |
| } else if (count == 2) { |
| appendValue(field, count); |
| } else { |
| throw new IllegalArgumentException("Too many pattern letters: " + cur); |
| } |
| break; |
| case 'D': |
| if (count == 1) { |
| appendValue(field); |
| } else if (count <= 3) { |
| appendValue(field, count); |
| } else { |
| throw new IllegalArgumentException("Too many pattern letters: " + cur); |
| } |
| break; |
| default: |
| if (count == 1) { |
| appendValue(field); |
| } else { |
| appendValue(field, count); |
| } |
| break; |
| } |
| } |
| |
| /** Map of letters to fields. */ |
| private static final Map<Character, TemporalField> FIELD_MAP = new HashMap<>(); |
| static { |
| // SDF = SimpleDateFormat |
| FIELD_MAP.put('G', ChronoField.ERA); // SDF, LDML (different to both for 1/2 chars) |
| FIELD_MAP.put('y', ChronoField.YEAR_OF_ERA); // SDF, LDML |
| FIELD_MAP.put('u', ChronoField.YEAR); // LDML (different in SDF) |
| FIELD_MAP.put('Q', IsoFields.QUARTER_OF_YEAR); // LDML (removed quarter from 310) |
| FIELD_MAP.put('q', IsoFields.QUARTER_OF_YEAR); // LDML (stand-alone) |
| FIELD_MAP.put('M', ChronoField.MONTH_OF_YEAR); // SDF, LDML |
| FIELD_MAP.put('L', ChronoField.MONTH_OF_YEAR); // SDF, LDML (stand-alone) |
| FIELD_MAP.put('D', ChronoField.DAY_OF_YEAR); // SDF, LDML |
| FIELD_MAP.put('d', ChronoField.DAY_OF_MONTH); // SDF, LDML |
| FIELD_MAP.put('F', ChronoField.ALIGNED_DAY_OF_WEEK_IN_MONTH); // SDF, LDML |
| FIELD_MAP.put('E', ChronoField.DAY_OF_WEEK); // SDF, LDML (different to both for 1/2 chars) |
| FIELD_MAP.put('c', ChronoField.DAY_OF_WEEK); // LDML (stand-alone) |
| FIELD_MAP.put('e', ChronoField.DAY_OF_WEEK); // LDML (needs localized week number) |
| FIELD_MAP.put('a', ChronoField.AMPM_OF_DAY); // SDF, LDML |
| FIELD_MAP.put('H', ChronoField.HOUR_OF_DAY); // SDF, LDML |
| FIELD_MAP.put('k', ChronoField.CLOCK_HOUR_OF_DAY); // SDF, LDML |
| FIELD_MAP.put('K', ChronoField.HOUR_OF_AMPM); // SDF, LDML |
| FIELD_MAP.put('h', ChronoField.CLOCK_HOUR_OF_AMPM); // SDF, LDML |
| FIELD_MAP.put('m', ChronoField.MINUTE_OF_HOUR); // SDF, LDML |
| FIELD_MAP.put('s', ChronoField.SECOND_OF_MINUTE); // SDF, LDML |
| FIELD_MAP.put('S', ChronoField.NANO_OF_SECOND); // LDML (SDF uses milli-of-second number) |
| FIELD_MAP.put('A', ChronoField.MILLI_OF_DAY); // LDML |
| FIELD_MAP.put('n', ChronoField.NANO_OF_SECOND); // 310 (proposed for LDML) |
| FIELD_MAP.put('N', ChronoField.NANO_OF_DAY); // 310 (proposed for LDML) |
| // 310 - z - time-zone names, matches LDML and SimpleDateFormat 1 to 4 |
| // 310 - Z - matches SimpleDateFormat and LDML |
| // 310 - V - time-zone id, matches LDML |
| // 310 - p - prefix for padding |
| // 310 - X - matches LDML, almost matches SDF for 1, exact match 2&3, extended 4&5 |
| // 310 - x - matches LDML |
| // 310 - w, W, and Y are localized forms matching LDML |
| // LDML - U - cycle year name, not supported by 310 yet |
| // LDML - l - deprecated |
| // LDML - j - not relevant |
| // LDML - g - modified-julian-day |
| // LDML - v,V - extended time-zone names |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Causes the next added printer/parser to pad to a fixed width using a space. |
| * <p> |
| * This padding will pad to a fixed width using spaces. |
| * <p> |
| * During formatting, the decorated element will be output and then padded |
| * to the specified width. An exception will be thrown during formatting if |
| * the pad width is exceeded. |
| * <p> |
| * During parsing, the padding and decorated element are parsed. |
| * If parsing is lenient, then the pad width is treated as a maximum. |
| * The padding is parsed greedily. Thus, if the decorated element starts with |
| * the pad character, it will not be parsed. |
| * |
| * @param padWidth the pad width, 1 or greater |
| * @return this, for chaining, not null |
| * @throws IllegalArgumentException if pad width is too small |
| */ |
| public DateTimeFormatterBuilder padNext(int padWidth) { |
| return padNext(padWidth, ' '); |
| } |
| |
| /** |
| * Causes the next added printer/parser to pad to a fixed width. |
| * <p> |
| * This padding is intended for padding other than zero-padding. |
| * Zero-padding should be achieved using the appendValue methods. |
| * <p> |
| * During formatting, the decorated element will be output and then padded |
| * to the specified width. An exception will be thrown during formatting if |
| * the pad width is exceeded. |
| * <p> |
| * During parsing, the padding and decorated element are parsed. |
| * If parsing is lenient, then the pad width is treated as a maximum. |
| * If parsing is case insensitive, then the pad character is matched ignoring case. |
| * The padding is parsed greedily. Thus, if the decorated element starts with |
| * the pad character, it will not be parsed. |
| * |
| * @param padWidth the pad width, 1 or greater |
| * @param padChar the pad character |
| * @return this, for chaining, not null |
| * @throws IllegalArgumentException if pad width is too small |
| */ |
| public DateTimeFormatterBuilder padNext(int padWidth, char padChar) { |
| if (padWidth < 1) { |
| throw new IllegalArgumentException("The pad width must be at least one but was " + padWidth); |
| } |
| active.padNextWidth = padWidth; |
| active.padNextChar = padChar; |
| active.valueParserIndex = -1; |
| return this; |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Mark the start of an optional section. |
| * <p> |
| * The output of formatting can include optional sections, which may be nested. |
| * An optional section is started by calling this method and ended by calling |
| * {@link #optionalEnd()} or by ending the build process. |
| * <p> |
| * All elements in the optional section are treated as optional. |
| * During formatting, the section is only output if data is available in the |
| * {@code TemporalAccessor} for all the elements in the section. |
| * During parsing, the whole section may be missing from the parsed string. |
| * <p> |
| * For example, consider a builder setup as |
| * {@code builder.appendValue(HOUR_OF_DAY,2).optionalStart().appendValue(MINUTE_OF_HOUR,2)}. |
| * The optional section ends automatically at the end of the builder. |
| * During formatting, the minute will only be output if its value can be obtained from the date-time. |
| * During parsing, the input will be successfully parsed whether the minute is present or not. |
| * |
| * @return this, for chaining, not null |
| */ |
| public DateTimeFormatterBuilder optionalStart() { |
| active.valueParserIndex = -1; |
| active = new DateTimeFormatterBuilder(active, true); |
| return this; |
| } |
| |
| /** |
| * Ends an optional section. |
| * <p> |
| * The output of formatting can include optional sections, which may be nested. |
| * An optional section is started by calling {@link #optionalStart()} and ended |
| * using this method (or at the end of the builder). |
| * <p> |
| * Calling this method without having previously called {@code optionalStart} |
| * will throw an exception. |
| * Calling this method immediately after calling {@code optionalStart} has no effect |
| * on the formatter other than ending the (empty) optional section. |
| * <p> |
| * All elements in the optional section are treated as optional. |
| * During formatting, the section is only output if data is available in the |
| * {@code TemporalAccessor} for all the elements in the section. |
| * During parsing, the whole section may be missing from the parsed string. |
| * <p> |
| * For example, consider a builder setup as |
| * {@code builder.appendValue(HOUR_OF_DAY,2).optionalStart().appendValue(MINUTE_OF_HOUR,2).optionalEnd()}. |
| * During formatting, the minute will only be output if its value can be obtained from the date-time. |
| * During parsing, the input will be successfully parsed whether the minute is present or not. |
| * |
| * @return this, for chaining, not null |
| * @throws IllegalStateException if there was no previous call to {@code optionalStart} |
| */ |
| public DateTimeFormatterBuilder optionalEnd() { |
| if (active.parent == null) { |
| throw new IllegalStateException("Cannot call optionalEnd() as there was no previous call to optionalStart()"); |
| } |
| if (active.printerParsers.size() > 0) { |
| CompositePrinterParser cpp = new CompositePrinterParser(active.printerParsers, active.optional); |
| active = active.parent; |
| appendInternal(cpp); |
| } else { |
| active = active.parent; |
| } |
| return this; |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Appends a printer and/or parser to the internal list handling padding. |
| * |
| * @param pp the printer-parser to add, not null |
| * @return the index into the active parsers list |
| */ |
| private int appendInternal(DateTimePrinterParser pp) { |
| Objects.requireNonNull(pp, "pp"); |
| if (active.padNextWidth > 0) { |
| if (pp != null) { |
| pp = new PadPrinterParserDecorator(pp, active.padNextWidth, active.padNextChar); |
| } |
| active.padNextWidth = 0; |
| active.padNextChar = 0; |
| } |
| active.printerParsers.add(pp); |
| active.valueParserIndex = -1; |
| return active.printerParsers.size() - 1; |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Completes this builder by creating the {@code DateTimeFormatter} |
| * using the default locale. |
| * <p> |
| * This will create a formatter with the {@linkplain Locale#getDefault(Locale.Category) default FORMAT locale}. |
| * Numbers will be printed and parsed using the standard DecimalStyle. |
| * The resolver style will be {@link ResolverStyle#SMART SMART}. |
| * <p> |
| * Calling this method will end any open optional sections by repeatedly |
| * calling {@link #optionalEnd()} before creating the formatter. |
| * <p> |
| * This builder can still be used after creating the formatter if desired, |
| * although the state may have been changed by calls to {@code optionalEnd}. |
| * |
| * @return the created formatter, not null |
| */ |
| public DateTimeFormatter toFormatter() { |
| return toFormatter(Locale.getDefault(Locale.Category.FORMAT)); |
| } |
| |
| /** |
| * Completes this builder by creating the {@code DateTimeFormatter} |
| * using the specified locale. |
| * <p> |
| * This will create a formatter with the specified locale. |
| * Numbers will be printed and parsed using the standard DecimalStyle. |
| * The resolver style will be {@link ResolverStyle#SMART SMART}. |
| * <p> |
| * Calling this method will end any open optional sections by repeatedly |
| * calling {@link #optionalEnd()} before creating the formatter. |
| * <p> |
| * This builder can still be used after creating the formatter if desired, |
| * although the state may have been changed by calls to {@code optionalEnd}. |
| * |
| * @param locale the locale to use for formatting, not null |
| * @return the created formatter, not null |
| */ |
| public DateTimeFormatter toFormatter(Locale locale) { |
| return toFormatter(locale, ResolverStyle.SMART, null); |
| } |
| |
| /** |
| * Completes this builder by creating the formatter. |
| * This uses the default locale. |
| * |
| * @param resolverStyle the resolver style to use, not null |
| * @return the created formatter, not null |
| */ |
| DateTimeFormatter toFormatter(ResolverStyle resolverStyle, Chronology chrono) { |
| return toFormatter(Locale.getDefault(Locale.Category.FORMAT), resolverStyle, chrono); |
| } |
| |
| /** |
| * Completes this builder by creating the formatter. |
| * |
| * @param locale the locale to use for formatting, not null |
| * @param chrono the chronology to use, may be null |
| * @return the created formatter, not null |
| */ |
| private DateTimeFormatter toFormatter(Locale locale, ResolverStyle resolverStyle, Chronology chrono) { |
| Objects.requireNonNull(locale, "locale"); |
| while (active.parent != null) { |
| optionalEnd(); |
| } |
| CompositePrinterParser pp = new CompositePrinterParser(printerParsers, false); |
| return new DateTimeFormatter(pp, locale, DecimalStyle.STANDARD, |
| resolverStyle, null, chrono, null); |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Strategy for formatting/parsing date-time information. |
| * <p> |
| * The printer may format any part, or the whole, of the input date-time object. |
| * Typically, a complete format is constructed from a number of smaller |
| * units, each outputting a single field. |
| * <p> |
| * The parser may parse any piece of text from the input, storing the result |
| * in the context. Typically, each individual parser will just parse one |
| * field, such as the day-of-month, storing the value in the context. |
| * Once the parse is complete, the caller will then resolve the parsed values |
| * to create the desired object, such as a {@code LocalDate}. |
| * <p> |
| * The parse position will be updated during the parse. Parsing will start at |
| * the specified index and the return value specifies the new parse position |
| * for the next parser. If an error occurs, the returned index will be negative |
| * and will have the error position encoded using the complement operator. |
| * |
| * @implSpec |
| * This interface must be implemented with care to ensure other classes operate correctly. |
| * All implementations that can be instantiated must be final, immutable and thread-safe. |
| * <p> |
| * The context is not a thread-safe object and a new instance will be created |
| * for each format that occurs. The context must not be stored in an instance |
| * variable or shared with any other threads. |
| */ |
| interface DateTimePrinterParser { |
| |
| /** |
| * Prints the date-time object to the buffer. |
| * <p> |
| * The context holds information to use during the format. |
| * It also contains the date-time information to be printed. |
| * <p> |
| * The buffer must not be mutated beyond the content controlled by the implementation. |
| * |
| * @param context the context to format using, not null |
| * @param buf the buffer to append to, not null |
| * @return false if unable to query the value from the date-time, true otherwise |
| * @throws DateTimeException if the date-time cannot be printed successfully |
| */ |
| boolean format(DateTimePrintContext context, StringBuilder buf); |
| |
| /** |
| * Parses text into date-time information. |
| * <p> |
| * The context holds information to use during the parse. |
| * It is also used to store the parsed date-time information. |
| * |
| * @param context the context to use and parse into, not null |
| * @param text the input text to parse, not null |
| * @param position the position to start parsing at, from 0 to the text length |
| * @return the new parse position, where negative means an error with the |
| * error position encoded using the complement ~ operator |
| * @throws NullPointerException if the context or text is null |
| * @throws IndexOutOfBoundsException if the position is invalid |
| */ |
| int parse(DateTimeParseContext context, CharSequence text, int position); |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Composite printer and parser. |
| */ |
| static final class CompositePrinterParser implements DateTimePrinterParser { |
| private final DateTimePrinterParser[] printerParsers; |
| private final boolean optional; |
| |
| CompositePrinterParser(List<DateTimePrinterParser> printerParsers, boolean optional) { |
| this(printerParsers.toArray(new DateTimePrinterParser[printerParsers.size()]), optional); |
| } |
| |
| CompositePrinterParser(DateTimePrinterParser[] printerParsers, boolean optional) { |
| this.printerParsers = printerParsers; |
| this.optional = optional; |
| } |
| |
| /** |
| * Returns a copy of this printer-parser with the optional flag changed. |
| * |
| * @param optional the optional flag to set in the copy |
| * @return the new printer-parser, not null |
| */ |
| public CompositePrinterParser withOptional(boolean optional) { |
| if (optional == this.optional) { |
| return this; |
| } |
| return new CompositePrinterParser(printerParsers, optional); |
| } |
| |
| @Override |
| public boolean format(DateTimePrintContext context, StringBuilder buf) { |
| int length = buf.length(); |
| if (optional) { |
| context.startOptional(); |
| } |
| try { |
| for (DateTimePrinterParser pp : printerParsers) { |
| if (pp.format(context, buf) == false) { |
| buf.setLength(length); // reset buffer |
| return true; |
| } |
| } |
| } finally { |
| if (optional) { |
| context.endOptional(); |
| } |
| } |
| return true; |
| } |
| |
| @Override |
| public int parse(DateTimeParseContext context, CharSequence text, int position) { |
| if (optional) { |
| context.startOptional(); |
| int pos = position; |
| for (DateTimePrinterParser pp : printerParsers) { |
| pos = pp.parse(context, text, pos); |
| if (pos < 0) { |
| context.endOptional(false); |
| return position; // return original position |
| } |
| } |
| context.endOptional(true); |
| return pos; |
| } else { |
| for (DateTimePrinterParser pp : printerParsers) { |
| position = pp.parse(context, text, position); |
| if (position < 0) { |
| break; |
| } |
| } |
| return position; |
| } |
| } |
| |
| @Override |
| public String toString() { |
| StringBuilder buf = new StringBuilder(); |
| if (printerParsers != null) { |
| buf.append(optional ? "[" : "("); |
| for (DateTimePrinterParser pp : printerParsers) { |
| buf.append(pp); |
| } |
| buf.append(optional ? "]" : ")"); |
| } |
| return buf.toString(); |
| } |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Pads the output to a fixed width. |
| */ |
| static final class PadPrinterParserDecorator implements DateTimePrinterParser { |
| private final DateTimePrinterParser printerParser; |
| private final int padWidth; |
| private final char padChar; |
| |
| /** |
| * Constructor. |
| * |
| * @param printerParser the printer, not null |
| * @param padWidth the width to pad to, 1 or greater |
| * @param padChar the pad character |
| */ |
| PadPrinterParserDecorator(DateTimePrinterParser printerParser, int padWidth, char padChar) { |
| // input checked by DateTimeFormatterBuilder |
| this.printerParser = printerParser; |
| this.padWidth = padWidth; |
| this.padChar = padChar; |
| } |
| |
| @Override |
| public boolean format(DateTimePrintContext context, StringBuilder buf) { |
| int preLen = buf.length(); |
| if (printerParser.format(context, buf) == false) { |
| return false; |
| } |
| int len = buf.length() - preLen; |
| if (len > padWidth) { |
| throw new DateTimeException( |
| "Cannot print as output of " + len + " characters exceeds pad width of " + padWidth); |
| } |
| for (int i = 0; i < padWidth - len; i++) { |
| buf.insert(preLen, padChar); |
| } |
| return true; |
| } |
| |
| @Override |
| public int parse(DateTimeParseContext context, CharSequence text, int position) { |
| // cache context before changed by decorated parser |
| final boolean strict = context.isStrict(); |
| // parse |
| if (position > text.length()) { |
| throw new IndexOutOfBoundsException(); |
| } |
| if (position == text.length()) { |
| return ~position; // no more characters in the string |
| } |
| int endPos = position + padWidth; |
| if (endPos > text.length()) { |
| if (strict) { |
| return ~position; // not enough characters in the string to meet the parse width |
| } |
| endPos = text.length(); |
| } |
| int pos = position; |
| while (pos < endPos && context.charEquals(text.charAt(pos), padChar)) { |
| pos++; |
| } |
| text = text.subSequence(0, endPos); |
| int resultPos = printerParser.parse(context, text, pos); |
| if (resultPos != endPos && strict) { |
| return ~(position + pos); // parse of decorated field didn't parse to the end |
| } |
| return resultPos; |
| } |
| |
| @Override |
| public String toString() { |
| return "Pad(" + printerParser + "," + padWidth + (padChar == ' ' ? ")" : ",'" + padChar + "')"); |
| } |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Enumeration to apply simple parse settings. |
| */ |
| static enum SettingsParser implements DateTimePrinterParser { |
| SENSITIVE, |
| INSENSITIVE, |
| STRICT, |
| LENIENT; |
| |
| @Override |
| public boolean format(DateTimePrintContext context, StringBuilder buf) { |
| return true; // nothing to do here |
| } |
| |
| @Override |
| public int parse(DateTimeParseContext context, CharSequence text, int position) { |
| // using ordinals to avoid javac synthetic inner class |
| switch (ordinal()) { |
| case 0: context.setCaseSensitive(true); break; |
| case 1: context.setCaseSensitive(false); break; |
| case 2: context.setStrict(true); break; |
| case 3: context.setStrict(false); break; |
| } |
| return position; |
| } |
| |
| @Override |
| public String toString() { |
| // using ordinals to avoid javac synthetic inner class |
| switch (ordinal()) { |
| case 0: return "ParseCaseSensitive(true)"; |
| case 1: return "ParseCaseSensitive(false)"; |
| case 2: return "ParseStrict(true)"; |
| case 3: return "ParseStrict(false)"; |
| } |
| throw new IllegalStateException("Unreachable"); |
| } |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Defaults a value into the parse if not currently present. |
| */ |
| static class DefaultValueParser implements DateTimePrinterParser { |
| private final TemporalField field; |
| private final long value; |
| |
| DefaultValueParser(TemporalField field, long value) { |
| this.field = field; |
| this.value = value; |
| } |
| |
| public boolean format(DateTimePrintContext context, StringBuilder buf) { |
| return true; |
| } |
| |
| public int parse(DateTimeParseContext context, CharSequence text, int position) { |
| if (context.getParsed(field) == null) { |
| context.setParsedField(field, value, position, position); |
| } |
| return position; |
| } |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Prints or parses a character literal. |
| */ |
| static final class CharLiteralPrinterParser implements DateTimePrinterParser { |
| private final char literal; |
| |
| CharLiteralPrinterParser(char literal) { |
| this.literal = literal; |
| } |
| |
| @Override |
| public boolean format(DateTimePrintContext context, StringBuilder buf) { |
| buf.append(literal); |
| return true; |
| } |
| |
| @Override |
| public int parse(DateTimeParseContext context, CharSequence text, int position) { |
| int length = text.length(); |
| if (position == length) { |
| return ~position; |
| } |
| char ch = text.charAt(position); |
| if (ch != literal) { |
| if (context.isCaseSensitive() || |
| (Character.toUpperCase(ch) != Character.toUpperCase(literal) && |
| Character.toLowerCase(ch) != Character.toLowerCase(literal))) { |
| return ~position; |
| } |
| } |
| return position + 1; |
| } |
| |
| @Override |
| public String toString() { |
| if (literal == '\'') { |
| return "''"; |
| } |
| return "'" + literal + "'"; |
| } |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Prints or parses a string literal. |
| */ |
| static final class StringLiteralPrinterParser implements DateTimePrinterParser { |
| private final String literal; |
| |
| StringLiteralPrinterParser(String literal) { |
| this.literal = literal; // validated by caller |
| } |
| |
| @Override |
| public boolean format(DateTimePrintContext context, StringBuilder buf) { |
| buf.append(literal); |
| return true; |
| } |
| |
| @Override |
| public int parse(DateTimeParseContext context, CharSequence text, int position) { |
| int length = text.length(); |
| if (position > length || position < 0) { |
| throw new IndexOutOfBoundsException(); |
| } |
| if (context.subSequenceEquals(text, position, literal, 0, literal.length()) == false) { |
| return ~position; |
| } |
| return position + literal.length(); |
| } |
| |
| @Override |
| public String toString() { |
| String converted = literal.replace("'", "''"); |
| return "'" + converted + "'"; |
| } |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Prints and parses a numeric date-time field with optional padding. |
| */ |
| static class NumberPrinterParser implements DateTimePrinterParser { |
| |
| /** |
| * Array of 10 to the power of n. |
| */ |
| static final long[] EXCEED_POINTS = new long[] { |
| 0L, |
| 10L, |
| 100L, |
| 1000L, |
| 10000L, |
| 100000L, |
| 1000000L, |
| 10000000L, |
| 100000000L, |
| 1000000000L, |
| 10000000000L, |
| }; |
| |
| final TemporalField field; |
| final int minWidth; |
| final int maxWidth; |
| private final SignStyle signStyle; |
| final int subsequentWidth; |
| |
| /** |
| * Constructor. |
| * |
| * @param field the field to format, not null |
| * @param minWidth the minimum field width, from 1 to 19 |
| * @param maxWidth the maximum field width, from minWidth to 19 |
| * @param signStyle the positive/negative sign style, not null |
| */ |
| NumberPrinterParser(TemporalField field, int minWidth, int maxWidth, SignStyle signStyle) { |
| // validated by caller |
| this.field = field; |
| this.minWidth = minWidth; |
| this.maxWidth = maxWidth; |
| this.signStyle = signStyle; |
| this.subsequentWidth = 0; |
| } |
| |
| /** |
| * Constructor. |
| * |
| * @param field the field to format, not null |
| * @param minWidth the minimum field width, from 1 to 19 |
| * @param maxWidth the maximum field width, from minWidth to 19 |
| * @param signStyle the positive/negative sign style, not null |
| * @param subsequentWidth the width of subsequent non-negative numbers, 0 or greater, |
| * -1 if fixed width due to active adjacent parsing |
| */ |
| protected NumberPrinterParser(TemporalField field, int minWidth, int maxWidth, SignStyle signStyle, int subsequentWidth) { |
| // validated by caller |
| this.field = field; |
| this.minWidth = minWidth; |
| this.maxWidth = maxWidth; |
| this.signStyle = signStyle; |
| this.subsequentWidth = subsequentWidth; |
| } |
| |
| /** |
| * Returns a new instance with fixed width flag set. |
| * |
| * @return a new updated printer-parser, not null |
| */ |
| NumberPrinterParser withFixedWidth() { |
| if (subsequentWidth == -1) { |
| return this; |
| } |
| return new NumberPrinterParser(field, minWidth, maxWidth, signStyle, -1); |
| } |
| |
| /** |
| * Returns a new instance with an updated subsequent width. |
| * |
| * @param subsequentWidth the width of subsequent non-negative numbers, 0 or greater |
| * @return a new updated printer-parser, not null |
| */ |
| NumberPrinterParser withSubsequentWidth(int subsequentWidth) { |
| return new NumberPrinterParser(field, minWidth, maxWidth, signStyle, this.subsequentWidth + subsequentWidth); |
| } |
| |
| @Override |
| public boolean format(DateTimePrintContext context, StringBuilder buf) { |
| Long valueLong = context.getValue(field); |
| if (valueLong == null) { |
| return false; |
| } |
| long value = getValue(context, valueLong); |
| DecimalStyle decimalStyle = context.getDecimalStyle(); |
| String str = (value == Long.MIN_VALUE ? "9223372036854775808" : Long.toString(Math.abs(value))); |
| if (str.length() > maxWidth) { |
| throw new DateTimeException("Field " + field + |
| " cannot be printed as the value " + value + |
| " exceeds the maximum print width of " + maxWidth); |
| } |
| str = decimalStyle.convertNumberToI18N(str); |
| |
| if (value >= 0) { |
| switch (signStyle) { |
| case EXCEEDS_PAD: |
| if (minWidth < 19 && value >= EXCEED_POINTS[minWidth]) { |
| buf.append(decimalStyle.getPositiveSign()); |
| } |
| break; |
| case ALWAYS: |
| buf.append(decimalStyle.getPositiveSign()); |
| break; |
| } |
| } else { |
| switch (signStyle) { |
| case NORMAL: |
| case EXCEEDS_PAD: |
| case ALWAYS: |
| buf.append(decimalStyle.getNegativeSign()); |
| break; |
| case NOT_NEGATIVE: |
| throw new DateTimeException("Field " + field + |
| " cannot be printed as the value " + value + |
| " cannot be negative according to the SignStyle"); |
| } |
| } |
| for (int i = 0; i < minWidth - str.length(); i++) { |
| buf.append(decimalStyle.getZeroDigit()); |
| } |
| buf.append(str); |
| return true; |
| } |
| |
| /** |
| * Gets the value to output. |
| * |
| * @param context the context |
| * @param value the value of the field, not null |
| * @return the value |
| */ |
| long getValue(DateTimePrintContext context, long value) { |
| return value; |
| } |
| |
| /** |
| * For NumberPrinterParser, the width is fixed depending on the |
| * minWidth, maxWidth, signStyle and whether subsequent fields are fixed. |
| * @param context the context |
| * @return true if the field is fixed width |
| * @see DateTimeFormatterBuilder#appendValue(java.time.temporal.TemporalField, int) |
| */ |
| boolean isFixedWidth(DateTimeParseContext context) { |
| return subsequentWidth == -1 || |
| (subsequentWidth > 0 && minWidth == maxWidth && signStyle == SignStyle.NOT_NEGATIVE); |
| } |
| |
| @Override |
| public int parse(DateTimeParseContext context, CharSequence text, int position) { |
| int length = text.length(); |
| if (position == length) { |
| return ~position; |
| } |
| char sign = text.charAt(position); // IOOBE if invalid position |
| boolean negative = false; |
| boolean positive = false; |
| if (sign == context.getDecimalStyle().getPositiveSign()) { |
| if (signStyle.parse(true, context.isStrict(), minWidth == maxWidth) == false) { |
| return ~position; |
| } |
| positive = true; |
| position++; |
| } else if (sign == context.getDecimalStyle().getNegativeSign()) { |
| if (signStyle.parse(false, context.isStrict(), minWidth == maxWidth) == false) { |
| return ~position; |
| } |
| negative = true; |
| position++; |
| } else { |
| if (signStyle == SignStyle.ALWAYS && context.isStrict()) { |
| return ~position; |
| } |
| } |
| int effMinWidth = (context.isStrict() || isFixedWidth(context) ? minWidth : 1); |
| int minEndPos = position + effMinWidth; |
| if (minEndPos > length) { |
| return ~position; |
| } |
| int effMaxWidth = (context.isStrict() || isFixedWidth(context) ? maxWidth : 9) + Math.max(subsequentWidth, 0); |
| long total = 0; |
| BigInteger totalBig = null; |
| int pos = position; |
| for (int pass = 0; pass < 2; pass++) { |
| int maxEndPos = Math.min(pos + effMaxWidth, length); |
| while (pos < maxEndPos) { |
| char ch = text.charAt(pos++); |
| int digit = context.getDecimalStyle().convertToDigit(ch); |
| if (digit < 0) { |
| pos--; |
| if (pos < minEndPos) { |
| return ~position; // need at least min width digits |
| } |
| break; |
| } |
| if ((pos - position) > 18) { |
| if (totalBig == null) { |
| totalBig = BigInteger.valueOf(total); |
| } |
| totalBig = totalBig.multiply(BigInteger.TEN).add(BigInteger.valueOf(digit)); |
| } else { |
| total = total * 10 + digit; |
| } |
| } |
| if (subsequentWidth > 0 && pass == 0) { |
| // re-parse now we know the correct width |
| int parseLen = pos - position; |
| effMaxWidth = Math.max(effMinWidth, parseLen - subsequentWidth); |
| pos = position; |
| total = 0; |
| totalBig = null; |
| } else { |
| break; |
| } |
| } |
| if (negative) { |
| if (totalBig != null) { |
| if (totalBig.equals(BigInteger.ZERO) && context.isStrict()) { |
| return ~(position - 1); // minus zero not allowed |
| } |
| totalBig = totalBig.negate(); |
| } else { |
| if (total == 0 && context.isStrict()) { |
| return ~(position - 1); // minus zero not allowed |
| } |
| total = -total; |
| } |
| } else if (signStyle == SignStyle.EXCEEDS_PAD && context.isStrict()) { |
| int parseLen = pos - position; |
| if (positive) { |
| if (parseLen <= minWidth) { |
| return ~(position - 1); // '+' only parsed if minWidth exceeded |
| } |
| } else { |
| if (parseLen > minWidth) { |
| return ~position; // '+' must be parsed if minWidth exceeded |
| } |
| } |
| } |
| if (totalBig != null) { |
| if (totalBig.bitLength() > 63) { |
| // overflow, parse 1 less digit |
| totalBig = totalBig.divide(BigInteger.TEN); |
| pos--; |
| } |
| return setValue(context, totalBig.longValue(), position, pos); |
| } |
| return setValue(context, total, position, pos); |
| } |
| |
| /** |
| * Stores the value. |
| * |
| * @param context the context to store into, not null |
| * @param value the value |
| * @param errorPos the position of the field being parsed |
| * @param successPos the position after the field being parsed |
| * @return the new position |
| */ |
| int setValue(DateTimeParseContext context, long value, int errorPos, int successPos) { |
| return context.setParsedField(field, value, errorPos, successPos); |
| } |
| |
| @Override |
| public String toString() { |
| if (minWidth == 1 && maxWidth == 19 && signStyle == SignStyle.NORMAL) { |
| return "Value(" + field + ")"; |
| } |
| if (minWidth == maxWidth && signStyle == SignStyle.NOT_NEGATIVE) { |
| return "Value(" + field + "," + minWidth + ")"; |
| } |
| return "Value(" + field + "," + minWidth + "," + maxWidth + "," + signStyle + ")"; |
| } |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Prints and parses a reduced numeric date-time field. |
| */ |
| static final class ReducedPrinterParser extends NumberPrinterParser { |
| /** |
| * The base date for reduced value parsing. |
| */ |
| static final LocalDate BASE_DATE = LocalDate.of(2000, 1, 1); |
| |
| private final int baseValue; |
| private final ChronoLocalDate baseDate; |
| |
| /** |
| * Constructor. |
| * |
| * @param field the field to format, validated not null |
| * @param minWidth the minimum field width, from 1 to 10 |
| * @param maxWidth the maximum field width, from 1 to 10 |
| * @param baseValue the base value |
| * @param baseDate the base date |
| */ |
| ReducedPrinterParser(TemporalField field, int minWidth, int maxWidth, |
| int baseValue, ChronoLocalDate baseDate) { |
| this(field, minWidth, maxWidth, baseValue, baseDate, 0); |
| if (minWidth < 1 || minWidth > 10) { |
| throw new IllegalArgumentException("The minWidth must be from 1 to 10 inclusive but was " + minWidth); |
| } |
| if (maxWidth < 1 || maxWidth > 10) { |
| throw new IllegalArgumentException("The maxWidth must be from 1 to 10 inclusive but was " + minWidth); |
| } |
| if (maxWidth < minWidth) { |
| throw new IllegalArgumentException("Maximum width must exceed or equal the minimum width but " + |
| maxWidth + " < " + minWidth); |
| } |
| if (baseDate == null) { |
| if (field.range().isValidValue(baseValue) == false) { |
| throw new IllegalArgumentException("The base value must be within the range of the field"); |
| } |
| if ((((long) baseValue) + EXCEED_POINTS[maxWidth]) > Integer.MAX_VALUE) { |
| throw new DateTimeException("Unable to add printer-parser as the range exceeds the capacity of an int"); |
| } |
| } |
| } |
| |
| /** |
| * Constructor. |
| * The arguments have already been checked. |
| * |
| * @param field the field to format, validated not null |
| * @param minWidth the minimum field width, from 1 to 10 |
| * @param maxWidth the maximum field width, from 1 to 10 |
| * @param baseValue the base value |
| * @param baseDate the base date |
| * @param subsequentWidth the subsequentWidth for this instance |
| */ |
| private ReducedPrinterParser(TemporalField field, int minWidth, int maxWidth, |
| int baseValue, ChronoLocalDate baseDate, int subsequentWidth) { |
| super(field, minWidth, maxWidth, SignStyle.NOT_NEGATIVE, subsequentWidth); |
| this.baseValue = baseValue; |
| this.baseDate = baseDate; |
| } |
| |
| @Override |
| long getValue(DateTimePrintContext context, long value) { |
| long absValue = Math.abs(value); |
| int baseValue = this.baseValue; |
| if (baseDate != null) { |
| Chronology chrono = Chronology.from(context.getTemporal()); |
| baseValue = chrono.date(baseDate).get(field); |
| } |
| if (value >= baseValue && value < baseValue + EXCEED_POINTS[minWidth]) { |
| // Use the reduced value if it fits in minWidth |
| return absValue % EXCEED_POINTS[minWidth]; |
| } |
| // Otherwise truncate to fit in maxWidth |
| return absValue % EXCEED_POINTS[maxWidth]; |
| } |
| |
| @Override |
| int setValue(DateTimeParseContext context, long value, int errorPos, int successPos) { |
| int baseValue = this.baseValue; |
| if (baseDate != null) { |
| Chronology chrono = context.getEffectiveChronology(); |
| baseValue = chrono.date(baseDate).get(field); |
| |
| // In case the Chronology is changed later, add a callback when/if it changes |
| final long initialValue = value; |
| context.addChronoChangedListener( |
| (_unused) -> { |
| /* Repeat the set of the field using the current Chronology |
| * The success/error position is ignored because the value is |
| * intentionally being overwritten. |
| */ |
| setValue(context, initialValue, errorPos, successPos); |
| }); |
| } |
| int parseLen = successPos - errorPos; |
| if (parseLen == minWidth && value >= 0) { |
| long range = EXCEED_POINTS[minWidth]; |
| long lastPart = baseValue % range; |
| long basePart = baseValue - lastPart; |
| if (baseValue > 0) { |
| value = basePart + value; |
| } else { |
| value = basePart - value; |
| } |
| if (value < baseValue) { |
| value += range; |
| } |
| } |
| return context.setParsedField(field, value, errorPos, successPos); |
| } |
| |
| /** |
| * Returns a new instance with fixed width flag set. |
| * |
| * @return a new updated printer-parser, not null |
| */ |
| @Override |
| ReducedPrinterParser withFixedWidth() { |
| if (subsequentWidth == -1) { |
| return this; |
| } |
| return new ReducedPrinterParser(field, minWidth, maxWidth, baseValue, baseDate, -1); |
| } |
| |
| /** |
| * Returns a new instance with an updated subsequent width. |
| * |
| * @param subsequentWidth the width of subsequent non-negative numbers, 0 or greater |
| * @return a new updated printer-parser, not null |
| */ |
| @Override |
| ReducedPrinterParser withSubsequentWidth(int subsequentWidth) { |
| return new ReducedPrinterParser(field, minWidth, maxWidth, baseValue, baseDate, |
| this.subsequentWidth + subsequentWidth); |
| } |
| |
| /** |
| * For a ReducedPrinterParser, fixed width is false if the mode is strict, |
| * otherwise it is set as for NumberPrinterParser. |
| * @param context the context |
| * @return if the field is fixed width |
| * @see DateTimeFormatterBuilder#appendValueReduced(java.time.temporal.TemporalField, int, int, int) |
| */ |
| @Override |
| boolean isFixedWidth(DateTimeParseContext context) { |
| if (context.isStrict() == false) { |
| return false; |
| } |
| return super.isFixedWidth(context); |
| } |
| |
| @Override |
| public String toString() { |
| return "ReducedValue(" + field + "," + minWidth + "," + maxWidth + "," + (baseDate != null ? baseDate : baseValue) + ")"; |
| } |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Prints and parses a numeric date-time field with optional padding. |
| */ |
| static final class FractionPrinterParser implements DateTimePrinterParser { |
| private final TemporalField field; |
| private final int minWidth; |
| private final int maxWidth; |
| private final boolean decimalPoint; |
| |
| /** |
| * Constructor. |
| * |
| * @param field the field to output, not null |
| * @param minWidth the minimum width to output, from 0 to 9 |
| * @param maxWidth the maximum width to output, from 0 to 9 |
| * @param decimalPoint whether to output the localized decimal point symbol |
| */ |
| FractionPrinterParser(TemporalField field, int minWidth, int maxWidth, boolean decimalPoint) { |
| Objects.requireNonNull(field, "field"); |
| if (field.range().isFixed() == false) { |
| throw new IllegalArgumentException("Field must have a fixed set of values: " + field); |
| } |
| if (minWidth < 0 || minWidth > 9) { |
| throw new IllegalArgumentException("Minimum width must be from 0 to 9 inclusive but was " + minWidth); |
| } |
| if (maxWidth < 1 || maxWidth > 9) { |
| throw new IllegalArgumentException("Maximum width must be from 1 to 9 inclusive but was " + maxWidth); |
| } |
| if (maxWidth < minWidth) { |
| throw new IllegalArgumentException("Maximum width must exceed or equal the minimum width but " + |
| maxWidth + " < " + minWidth); |
| } |
| this.field = field; |
| this.minWidth = minWidth; |
| this.maxWidth = maxWidth; |
| this.decimalPoint = decimalPoint; |
| } |
| |
| @Override |
| public boolean format(DateTimePrintContext context, StringBuilder buf) { |
| Long value = context.getValue(field); |
| if (value == null) { |
| return false; |
| } |
| DecimalStyle decimalStyle = context.getDecimalStyle(); |
| BigDecimal fraction = convertToFraction(value); |
| if (fraction.scale() == 0) { // scale is zero if value is zero |
| if (minWidth > 0) { |
| if (decimalPoint) { |
| buf.append(decimalStyle.getDecimalSeparator()); |
| } |
| for (int i = 0; i < minWidth; i++) { |
| buf.append(decimalStyle.getZeroDigit()); |
| } |
| } |
| } else { |
| int outputScale = Math.min(Math.max(fraction.scale(), minWidth), maxWidth); |
| fraction = fraction.setScale(outputScale, RoundingMode.FLOOR); |
| String str = fraction.toPlainString().substring(2); |
| str = decimalStyle.convertNumberToI18N(str); |
| if (decimalPoint) { |
| buf.append(decimalStyle.getDecimalSeparator()); |
| } |
| buf.append(str); |
| } |
| return true; |
| } |
| |
| @Override |
| public int parse(DateTimeParseContext context, CharSequence text, int position) { |
| int effectiveMin = (context.isStrict() ? minWidth : 0); |
| int effectiveMax = (context.isStrict() ? maxWidth : 9); |
| int length = text.length(); |
| if (position == length) { |
| // valid if whole field is optional, invalid if minimum width |
| return (effectiveMin > 0 ? ~position : position); |
| } |
| if (decimalPoint) { |
| if (text.charAt(position) != context.getDecimalStyle().getDecimalSeparator()) { |
| // valid if whole field is optional, invalid if minimum width |
| return (effectiveMin > 0 ? ~position : position); |
| } |
| position++; |
| } |
| int minEndPos = position + effectiveMin; |
| if (minEndPos > length) { |
| return ~position; // need at least min width digits |
| } |
| int maxEndPos = Math.min(position + effectiveMax, length); |
| int total = 0; // can use int because we are only parsing up to 9 digits |
| int pos = position; |
| while (pos < maxEndPos) { |
| char ch = text.charAt(pos++); |
| int digit = context.getDecimalStyle().convertToDigit(ch); |
| if (digit < 0) { |
| if (pos < minEndPos) { |
| return ~position; // need at least min width digits |
| } |
| pos--; |
| break; |
| } |
| total = total * 10 + digit; |
| } |
| BigDecimal fraction = new BigDecimal(total).movePointLeft(pos - position); |
| long value = convertFromFraction(fraction); |
| return context.setParsedField(field, value, position, pos); |
| } |
| |
| /** |
| * Converts a value for this field to a fraction between 0 and 1. |
| * <p> |
| * The fractional value is between 0 (inclusive) and 1 (exclusive). |
| * It can only be returned if the {@link java.time.temporal.TemporalField#range() value range} is fixed. |
| * The fraction is obtained by calculation from the field range using 9 decimal |
| * places and a rounding mode of {@link RoundingMode#FLOOR FLOOR}. |
| * The calculation is inaccurate if the values do not run continuously from smallest to largest. |
| * <p> |
| * For example, the second-of-minute value of 15 would be returned as 0.25, |
| * assuming the standard definition of 60 seconds in a minute. |
| * |
| * @param value the value to convert, must be valid for this rule |
| * @return the value as a fraction within the range, from 0 to 1, not null |
| * @throws DateTimeException if the value cannot be converted to a fraction |
| */ |
| private BigDecimal convertToFraction(long value) { |
| ValueRange range = field.range(); |
| range.checkValidValue(value, field); |
| BigDecimal minBD = BigDecimal.valueOf(range.getMinimum()); |
| BigDecimal rangeBD = BigDecimal.valueOf(range.getMaximum()).subtract(minBD).add(BigDecimal.ONE); |
| BigDecimal valueBD = BigDecimal.valueOf(value).subtract(minBD); |
| BigDecimal fraction = valueBD.divide(rangeBD, 9, RoundingMode.FLOOR); |
| // stripTrailingZeros bug |
| return fraction.compareTo(BigDecimal.ZERO) == 0 ? BigDecimal.ZERO : fraction.stripTrailingZeros(); |
| } |
| |
| /** |
| * Converts a fraction from 0 to 1 for this field to a value. |
| * <p> |
| * The fractional value must be between 0 (inclusive) and 1 (exclusive). |
| * It can only be returned if the {@link java.time.temporal.TemporalField#range() value range} is fixed. |
| * The value is obtained by calculation from the field range and a rounding |
| * mode of {@link RoundingMode#FLOOR FLOOR}. |
| * The calculation is inaccurate if the values do not run continuously from smallest to largest. |
| * <p> |
| * For example, the fractional second-of-minute of 0.25 would be converted to 15, |
| * assuming the standard definition of 60 seconds in a minute. |
| * |
| * @param fraction the fraction to convert, not null |
| * @return the value of the field, valid for this rule |
| * @throws DateTimeException if the value cannot be converted |
| */ |
| private long convertFromFraction(BigDecimal fraction) { |
| ValueRange range = field.range(); |
| BigDecimal minBD = BigDecimal.valueOf(range.getMinimum()); |
| BigDecimal rangeBD = BigDecimal.valueOf(range.getMaximum()).subtract(minBD).add(BigDecimal.ONE); |
| BigDecimal valueBD = fraction.multiply(rangeBD).setScale(0, RoundingMode.FLOOR).add(minBD); |
| return valueBD.longValueExact(); |
| } |
| |
| @Override |
| public String toString() { |
| String decimal = (decimalPoint ? ",DecimalPoint" : ""); |
| return "Fraction(" + field + "," + minWidth + "," + maxWidth + decimal + ")"; |
| } |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Prints or parses field text. |
| */ |
| static final class TextPrinterParser implements DateTimePrinterParser { |
| private final TemporalField field; |
| private final TextStyle textStyle; |
| private final DateTimeTextProvider provider; |
| /** |
| * The cached number printer parser. |
| * Immutable and volatile, so no synchronization needed. |
| */ |
| private volatile NumberPrinterParser numberPrinterParser; |
| |
| /** |
| * Constructor. |
| * |
| * @param field the field to output, not null |
| * @param textStyle the text style, not null |
| * @param provider the text provider, not null |
| */ |
| TextPrinterParser(TemporalField field, TextStyle textStyle, DateTimeTextProvider provider) { |
| // validated by caller |
| this.field = field; |
| this.textStyle = textStyle; |
| this.provider = provider; |
| } |
| |
| @Override |
| public boolean format(DateTimePrintContext context, StringBuilder buf) { |
| Long value = context.getValue(field); |
| if (value == null) { |
| return false; |
| } |
| String text; |
| Chronology chrono = context.getTemporal().query(TemporalQueries.chronology()); |
| if (chrono == null || chrono == IsoChronology.INSTANCE) { |
| text = provider.getText(field, value, textStyle, context.getLocale()); |
| } else { |
| text = provider.getText(chrono, field, value, textStyle, context.getLocale()); |
| } |
| if (text == null) { |
| return numberPrinterParser().format(context, buf); |
| } |
| buf.append(text); |
| return true; |
| } |
| |
| @Override |
| public int parse(DateTimeParseContext context, CharSequence parseText, int position) { |
| int length = parseText.length(); |
| if (position < 0 || position > length) { |
| throw new IndexOutOfBoundsException(); |
| } |
| TextStyle style = (context.isStrict() ? textStyle : null); |
| Chronology chrono = context.getEffectiveChronology(); |
| Iterator<Entry<String, Long>> it; |
| if (chrono == null || chrono == IsoChronology.INSTANCE) { |
| it = provider.getTextIterator(field, style, context.getLocale()); |
| } else { |
| it = provider.getTextIterator(chrono, field, style, context.getLocale()); |
| } |
| if (it != null) { |
| while (it.hasNext()) { |
| Entry<String, Long> entry = it.next(); |
| String itText = entry.getKey(); |
| if (context.subSequenceEquals(itText, 0, parseText, position, itText.length())) { |
| return context.setParsedField(field, entry.getValue(), position, position + itText.length()); |
| } |
| } |
| if (context.isStrict()) { |
| return ~position; |
| } |
| } |
| return numberPrinterParser().parse(context, parseText, position); |
| } |
| |
| /** |
| * Create and cache a number printer parser. |
| * @return the number printer parser for this field, not null |
| */ |
| private NumberPrinterParser numberPrinterParser() { |
| if (numberPrinterParser == null) { |
| numberPrinterParser = new NumberPrinterParser(field, 1, 19, SignStyle.NORMAL); |
| } |
| return numberPrinterParser; |
| } |
| |
| @Override |
| public String toString() { |
| if (textStyle == TextStyle.FULL) { |
| return "Text(" + field + ")"; |
| } |
| return "Text(" + field + "," + textStyle + ")"; |
| } |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Prints or parses an ISO-8601 instant. |
| */ |
| static final class InstantPrinterParser implements DateTimePrinterParser { |
| // days in a 400 year cycle = 146097 |
| // days in a 10,000 year cycle = 146097 * 25 |
| // seconds per day = 86400 |
| private static final long SECONDS_PER_10000_YEARS = 146097L * 25L * 86400L; |
| private static final long SECONDS_0000_TO_1970 = ((146097L * 5L) - (30L * 365L + 7L)) * 86400L; |
| private final int fractionalDigits; |
| |
| InstantPrinterParser(int fractionalDigits) { |
| this.fractionalDigits = fractionalDigits; |
| } |
| |
| @Override |
| public boolean format(DateTimePrintContext context, StringBuilder buf) { |
| // use INSTANT_SECONDS, thus this code is not bound by Instant.MAX |
| Long inSecs = context.getValue(INSTANT_SECONDS); |
| Long inNanos = null; |
| if (context.getTemporal().isSupported(NANO_OF_SECOND)) { |
| inNanos = context.getTemporal().getLong(NANO_OF_SECOND); |
| } |
| if (inSecs == null) { |
| return false; |
| } |
| long inSec = inSecs; |
| int inNano = NANO_OF_SECOND.checkValidIntValue(inNanos != null ? inNanos : 0); |
| // format mostly using LocalDateTime.toString |
| if (inSec >= -SECONDS_0000_TO_1970) { |
| // current era |
| long zeroSecs = inSec - SECONDS_PER_10000_YEARS + SECONDS_0000_TO_1970; |
| long hi = Math.floorDiv(zeroSecs, SECONDS_PER_10000_YEARS) + 1; |
| long lo = Math.floorMod(zeroSecs, SECONDS_PER_10000_YEARS); |
| LocalDateTime ldt = LocalDateTime.ofEpochSecond(lo - SECONDS_0000_TO_1970, 0, ZoneOffset.UTC); |
| if (hi > 0) { |
| buf.append('+').append(hi); |
| } |
| buf.append(ldt); |
| if (ldt.getSecond() == 0) { |
| buf.append(":00"); |
| } |
| } else { |
| // before current era |
| long zeroSecs = inSec + SECONDS_0000_TO_1970; |
| long hi = zeroSecs / SECONDS_PER_10000_YEARS; |
| long lo = zeroSecs % SECONDS_PER_10000_YEARS; |
| LocalDateTime ldt = LocalDateTime.ofEpochSecond(lo - SECONDS_0000_TO_1970, 0, ZoneOffset.UTC); |
| int pos = buf.length(); |
| buf.append(ldt); |
| if (ldt.getSecond() == 0) { |
| buf.append(":00"); |
| } |
| if (hi < 0) { |
| if (ldt.getYear() == -10_000) { |
| buf.replace(pos, pos + 2, Long.toString(hi - 1)); |
| } else if (lo == 0) { |
| buf.insert(pos, hi); |
| } else { |
| buf.insert(pos + 1, Math.abs(hi)); |
| } |
| } |
| } |
| // add fraction |
| if ((fractionalDigits < 0 && inNano > 0) || fractionalDigits > 0) { |
| buf.append('.'); |
| int div = 100_000_000; |
| for (int i = 0; ((fractionalDigits == -1 && inNano > 0) || |
| (fractionalDigits == -2 && (inNano > 0 || (i % 3) != 0)) || |
| i < fractionalDigits); i++) { |
| int digit = inNano / div; |
| buf.append((char) (digit + '0')); |
| inNano = inNano - (digit * div); |
| div = div / 10; |
| } |
| } |
| buf.append('Z'); |
| return true; |
| } |
| |
| @Override |
| public int parse(DateTimeParseContext context, CharSequence text, int position) { |
| // new context to avoid overwriting fields like year/month/day |
| int minDigits = (fractionalDigits < 0 ? 0 : fractionalDigits); |
| int maxDigits = (fractionalDigits < 0 ? 9 : fractionalDigits); |
| CompositePrinterParser parser = new DateTimeFormatterBuilder() |
| .append(DateTimeFormatter.ISO_LOCAL_DATE).appendLiteral('T') |
| .appendValue(HOUR_OF_DAY, 2).appendLiteral(':') |
| .appendValue(MINUTE_OF_HOUR, 2).appendLiteral(':') |
| .appendValue(SECOND_OF_MINUTE, 2) |
| .appendFraction(NANO_OF_SECOND, minDigits, maxDigits, true) |
| .appendLiteral('Z') |
| .toFormatter().toPrinterParser(false); |
| DateTimeParseContext newContext = context.copy(); |
| int pos = parser.parse(newContext, text, position); |
| if (pos < 0) { |
| return pos; |
| } |
| // parser restricts most fields to 2 digits, so definitely int |
| // correctly parsed nano is also guaranteed to be valid |
| long yearParsed = newContext.getParsed(YEAR); |
| int month = newContext.getParsed(MONTH_OF_YEAR).intValue(); |
| int day = newContext.getParsed(DAY_OF_MONTH).intValue(); |
| int hour = newContext.getParsed(HOUR_OF_DAY).intValue(); |
| int min = newContext.getParsed(MINUTE_OF_HOUR).intValue(); |
| Long secVal = newContext.getParsed(SECOND_OF_MINUTE); |
| Long nanoVal = newContext.getParsed(NANO_OF_SECOND); |
| int sec = (secVal != null ? secVal.intValue() : 0); |
| int nano = (nanoVal != null ? nanoVal.intValue() : 0); |
| int days = 0; |
| if (hour == 24 && min == 0 && sec == 0 && nano == 0) { |
| hour = 0; |
| days = 1; |
| } else if (hour == 23 && min == 59 && sec == 60) { |
| context.setParsedLeapSecond(); |
| sec = 59; |
| } |
| int year = (int) yearParsed % 10_000; |
| long instantSecs; |
| try { |
| LocalDateTime ldt = LocalDateTime.of(year, month, day, hour, min, sec, 0).plusDays(days); |
| instantSecs = ldt.toEpochSecond(ZoneOffset.UTC); |
| instantSecs += Math.multiplyExact(yearParsed / 10_000L, SECONDS_PER_10000_YEARS); |
| } catch (RuntimeException ex) { |
| return ~position; |
| } |
| int successPos = pos; |
| successPos = context.setParsedField(INSTANT_SECONDS, instantSecs, position, successPos); |
| return context.setParsedField(NANO_OF_SECOND, nano, position, successPos); |
| } |
| |
| @Override |
| public String toString() { |
| return "Instant()"; |
| } |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Prints or parses an offset ID. |
| */ |
| static final class OffsetIdPrinterParser implements DateTimePrinterParser { |
| static final String[] PATTERNS = new String[] { |
| "+HH", "+HHmm", "+HH:mm", "+HHMM", "+HH:MM", "+HHMMss", "+HH:MM:ss", "+HHMMSS", "+HH:MM:SS", |
| }; // order used in pattern builder |
| static final OffsetIdPrinterParser INSTANCE_ID_Z = new OffsetIdPrinterParser("+HH:MM:ss", "Z"); |
| static final OffsetIdPrinterParser INSTANCE_ID_ZERO = new OffsetIdPrinterParser("+HH:MM:ss", "0"); |
| |
| private final String noOffsetText; |
| private final int type; |
| |
| /** |
| * Constructor. |
| * |
| * @param pattern the pattern |
| * @param noOffsetText the text to use for UTC, not null |
| */ |
| OffsetIdPrinterParser(String pattern, String noOffsetText) { |
| Objects.requireNonNull(pattern, "pattern"); |
| Objects.requireNonNull(noOffsetText, "noOffsetText"); |
| this.type = checkPattern(pattern); |
| this.noOffsetText = noOffsetText; |
| } |
| |
| private int checkPattern(String pattern) { |
| for (int i = 0; i < PATTERNS.length; i++) { |
| if (PATTERNS[i].equals(pattern)) { |
| return i; |
| } |
| } |
| throw new IllegalArgumentException("Invalid zone offset pattern: " + pattern); |
| } |
| |
| @Override |
| public boolean format(DateTimePrintContext context, StringBuilder buf) { |
| Long offsetSecs = context.getValue(OFFSET_SECONDS); |
| if (offsetSecs == null) { |
| return false; |
| } |
| int totalSecs = Math.toIntExact(offsetSecs); |
| if (totalSecs == 0) { |
| buf.append(noOffsetText); |
| } else { |
| int absHours = Math.abs((totalSecs / 3600) % 100); // anything larger than 99 silently dropped |
| int absMinutes = Math.abs((totalSecs / 60) % 60); |
| int absSeconds = Math.abs(totalSecs % 60); |
| int bufPos = buf.length(); |
| int output = absHours; |
| buf.append(totalSecs < 0 ? "-" : "+") |
| .append((char) (absHours / 10 + '0')).append((char) (absHours % 10 + '0')); |
| if (type >= 3 || (type >= 1 && absMinutes > 0)) { |
| buf.append((type % 2) == 0 ? ":" : "") |
| .append((char) (absMinutes / 10 + '0')).append((char) (absMinutes % 10 + '0')); |
| output += absMinutes; |
| if (type >= 7 || (type >= 5 && absSeconds > 0)) { |
| buf.append((type % 2) == 0 ? ":" : "") |
| .append((char) (absSeconds / 10 + '0')).append((char) (absSeconds % 10 + '0')); |
| output += absSeconds; |
| } |
| } |
| if (output == 0) { |
| buf.setLength(bufPos); |
| buf.append(noOffsetText); |
| } |
| } |
| return true; |
| } |
| |
| @Override |
| public int parse(DateTimeParseContext context, CharSequence text, int position) { |
| int length = text.length(); |
| int noOffsetLen = noOffsetText.length(); |
| if (noOffsetLen == 0) { |
| if (position == length) { |
| return context.setParsedField(OFFSET_SECONDS, 0, position, position); |
| } |
| } else { |
| if (position == length) { |
| return ~position; |
| } |
| if (context.subSequenceEquals(text, position, noOffsetText, 0, noOffsetLen)) { |
| return context.setParsedField(OFFSET_SECONDS, 0, position, position + noOffsetLen); |
| } |
| } |
| |
| // parse normal plus/minus offset |
| char sign = text.charAt(position); // IOOBE if invalid position |
| if (sign == '+' || sign == '-') { |
| // starts |
| int negative = (sign == '-' ? -1 : 1); |
| int[] array = new int[4]; |
| array[0] = position + 1; |
| if ((parseNumber(array, 1, text, true) || |
| parseNumber(array, 2, text, type >=3) || |
| parseNumber(array, 3, text, false)) == false) { |
| // success |
| long offsetSecs = negative * (array[1] * 3600L + array[2] * 60L + array[3]); |
| return context.setParsedField(OFFSET_SECONDS, offsetSecs, position, array[0]); |
| } |
| } |
| // handle special case of empty no offset text |
| if (noOffsetLen == 0) { |
| return context.setParsedField(OFFSET_SECONDS, 0, position, position + noOffsetLen); |
| } |
| return ~position; |
| } |
| |
| /** |
| * Parse a two digit zero-prefixed number. |
| * |
| * @param array the array of parsed data, 0=pos,1=hours,2=mins,3=secs, not null |
| * @param arrayIndex the index to parse the value into |
| * @param parseText the offset ID, not null |
| * @param required whether this number is required |
| * @return true if an error occurred |
| */ |
| private boolean parseNumber(int[] array, int arrayIndex, CharSequence parseText, boolean required) { |
| if ((type + 3) / 2 < arrayIndex) { |
| return false; // ignore seconds/minutes |
| } |
| int pos = array[0]; |
| if ((type % 2) == 0 && arrayIndex > 1) { |
| if (pos + 1 > parseText.length() || parseText.charAt(pos) != ':') { |
| return required; |
| } |
| pos++; |
| } |
| if (pos + 2 > parseText.length()) { |
| return required; |
| } |
| char ch1 = parseText.charAt(pos++); |
| char ch2 = parseText.charAt(pos++); |
| if (ch1 < '0' || ch1 > '9' || ch2 < '0' || ch2 > '9') { |
| return required; |
| } |
| int value = (ch1 - 48) * 10 + (ch2 - 48); |
| if (value < 0 || value > 59) { |
| return required; |
| } |
| array[arrayIndex] = value; |
| array[0] = pos; |
| return false; |
| } |
| |
| @Override |
| public String toString() { |
| String converted = noOffsetText.replace("'", "''"); |
| return "Offset(" + PATTERNS[type] + ",'" + converted + "')"; |
| } |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Prints or parses an offset ID. |
| */ |
| static final class LocalizedOffsetIdPrinterParser implements DateTimePrinterParser { |
| private final TextStyle style; |
| |
| /** |
| * Constructor. |
| * |
| * @param style the style, not null |
| */ |
| LocalizedOffsetIdPrinterParser(TextStyle style) { |
| this.style = style; |
| } |
| |
| private static StringBuilder appendHMS(StringBuilder buf, int t) { |
| return buf.append((char)(t / 10 + '0')) |
| .append((char)(t % 10 + '0')); |
| } |
| |
| @Override |
| public boolean format(DateTimePrintContext context, StringBuilder buf) { |
| Long offsetSecs = context.getValue(OFFSET_SECONDS); |
| if (offsetSecs == null) { |
| return false; |
| } |
| String gmtText = "GMT"; // TODO: get localized version of 'GMT' |
| if (gmtText != null) { |
| buf.append(gmtText); |
| } |
| int totalSecs = Math.toIntExact(offsetSecs); |
| if (totalSecs != 0) { |
| int absHours = Math.abs((totalSecs / 3600) % 100); // anything larger than 99 silently dropped |
| int absMinutes = Math.abs((totalSecs / 60) % 60); |
| int absSeconds = Math.abs(totalSecs % 60); |
| buf.append(totalSecs < 0 ? "-" : "+"); |
| if (style == TextStyle.FULL) { |
| appendHMS(buf, absHours); |
| buf.append(':'); |
| appendHMS(buf, absMinutes); |
| if (absSeconds != 0) { |
| buf.append(':'); |
| appendHMS(buf, absSeconds); |
| } |
| } else { |
| if (absHours >= 10) { |
| buf.append((char)(absHours / 10 + '0')); |
| } |
| buf.append((char)(absHours % 10 + '0')); |
| if (absMinutes != 0 || absSeconds != 0) { |
| buf.append(':'); |
| appendHMS(buf, absMinutes); |
| if (absSeconds != 0) { |
| buf.append(':'); |
| appendHMS(buf, absSeconds); |
| } |
| } |
| } |
| } |
| return true; |
| } |
| |
| int getDigit(CharSequence text, int position) { |
| char c = text.charAt(position); |
| if (c < '0' || c > '9') { |
| return -1; |
| } |
| return c - '0'; |
| } |
| |
| @Override |
| public int parse(DateTimeParseContext context, CharSequence text, int position) { |
| int pos = position; |
| int end = pos + text.length(); |
| String gmtText = "GMT"; // TODO: get localized version of 'GMT' |
| if (gmtText != null) { |
| if (!context.subSequenceEquals(text, pos, gmtText, 0, gmtText.length())) { |
| return ~position; |
| } |
| pos += gmtText.length(); |
| } |
| // parse normal plus/minus offset |
| int negative = 0; |
| if (pos == end) { |
| return context.setParsedField(OFFSET_SECONDS, 0, position, pos); |
| } |
| char sign = text.charAt(pos); // IOOBE if invalid position |
| if (sign == '+') { |
| negative = 1; |
| } else if (sign == '-') { |
| negative = -1; |
| } else { |
| return context.setParsedField(OFFSET_SECONDS, 0, position, pos); |
| } |
| pos++; |
| int h = 0; |
| int m = 0; |
| int s = 0; |
| if (style == TextStyle.FULL) { |
| int h1 = getDigit(text, pos++); |
| int h2 = getDigit(text, pos++); |
| if (h1 < 0 || h2 < 0 || text.charAt(pos++) != ':') { |
| return ~position; |
| } |
| h = h1 * 10 + h2; |
| int m1 = getDigit(text, pos++); |
| int m2 = getDigit(text, pos++); |
| if (m1 < 0 || m2 < 0) { |
| return ~position; |
| } |
| m = m1 * 10 + m2; |
| if (pos + 2 < end && text.charAt(pos) == ':') { |
| int s1 = getDigit(text, pos + 1); |
| int s2 = getDigit(text, pos + 2); |
| if (s1 >= 0 && s2 >= 0) { |
| s = s1 * 10 + s2; |
| pos += 3; |
| } |
| } |
| } else { |
| h = getDigit(text, pos++); |
| if (h < 0) { |
| return ~position; |
| } |
| if (pos < end) { |
| int h2 = getDigit(text, pos); |
| if (h2 >=0) { |
| h = h * 10 + h2; |
| pos++; |
| } |
| if (pos + 2 < end && text.charAt(pos) == ':') { |
| if (pos + 2 < end && text.charAt(pos) == ':') { |
| int m1 = getDigit(text, pos + 1); |
| int m2 = getDigit(text, pos + 2); |
| if (m1 >= 0 && m2 >= 0) { |
| m = m1 * 10 + m2; |
| pos += 3; |
| if (pos + 2 < end && text.charAt(pos) == ':') { |
| int s1 = getDigit(text, pos + 1); |
| int s2 = getDigit(text, pos + 2); |
| if (s1 >= 0 && s2 >= 0) { |
| s = s1 * 10 + s2; |
| pos += 3; |
| } |
| } |
| } |
| } |
| } |
| } |
| } |
| long offsetSecs = negative * (h * 3600L + m * 60L + s); |
| return context.setParsedField(OFFSET_SECONDS, offsetSecs, position, pos); |
| } |
| |
| @Override |
| public String toString() { |
| return "LocalizedOffset(" + style + ")"; |
| } |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Prints or parses a zone ID. |
| */ |
| static final class ZoneTextPrinterParser extends ZoneIdPrinterParser { |
| |
| /** The text style to output. */ |
| private final TextStyle textStyle; |
| |
| /** The preferred zoneid map */ |
| private Set<String> preferredZones; |
| |
| ZoneTextPrinterParser(TextStyle textStyle, Set<ZoneId> preferredZones) { |
| super(TemporalQueries.zone(), "ZoneText(" + textStyle + ")"); |
| this.textStyle = Objects.requireNonNull(textStyle, "textStyle"); |
| if (preferredZones != null && preferredZones.size() != 0) { |
| this.preferredZones = new HashSet<>(); |
| for (ZoneId id : preferredZones) { |
| this.preferredZones.add(id.getId()); |
| } |
| } |
| } |
| |
| private static final int STD = 0; |
| private static final int DST = 1; |
| private static final int GENERIC = 2; |
| |
| // BEGIN Android-added: Lists of types used by getDisplayName(). |
| private static final TimeZoneNames.NameType[] TYPES = new TimeZoneNames.NameType[] { |
| TimeZoneNames.NameType.LONG_STANDARD, |
| TimeZoneNames.NameType.SHORT_STANDARD, |
| TimeZoneNames.NameType.LONG_DAYLIGHT, |
| TimeZoneNames.NameType.SHORT_DAYLIGHT, |
| TimeZoneNames.NameType.LONG_GENERIC, |
| TimeZoneNames.NameType.SHORT_GENERIC, |
| }; |
| |
| private static final TimeZoneNames.NameType[] FULL_TYPES = new TimeZoneNames.NameType[] { |
| TimeZoneNames.NameType.LONG_STANDARD, |
| TimeZoneNames.NameType.LONG_DAYLIGHT, |
| TimeZoneNames.NameType.LONG_GENERIC, |
| }; |
| |
| private static final TimeZoneNames.NameType[] SHORT_TYPES = new TimeZoneNames.NameType[] { |
| TimeZoneNames.NameType.SHORT_STANDARD, |
| TimeZoneNames.NameType.SHORT_DAYLIGHT, |
| TimeZoneNames.NameType.SHORT_GENERIC, |
| }; |
| // END Android-added: Lists of types used by getDisplayName(). |
| |
| private static final Map<String, SoftReference<Map<Locale, String[]>>> cache = |
| new ConcurrentHashMap<>(); |
| |
| private String getDisplayName(String id, int type, Locale locale) { |
| if (textStyle == TextStyle.NARROW) { |
| return null; |
| } |
| String[] names; |
| SoftReference<Map<Locale, String[]>> ref = cache.get(id); |
| Map<Locale, String[]> perLocale = null; |
| if (ref == null || (perLocale = ref.get()) == null || |
| (names = perLocale.get(locale)) == null) { |
| // BEGIN Android-changed: use ICU TimeZoneNames instead of TimeZoneNameUtility. |
| /* |
| names = TimeZoneNameUtility.retrieveDisplayNames(id, locale); |
| if (names == null) { |
| return null; |
| } |
| names = Arrays.copyOfRange(names, 0, 7); |
| names[5] = |
| TimeZoneNameUtility.retrieveGenericDisplayName(id, TimeZone.LONG, locale); |
| if (names[5] == null) { |
| names[5] = names[0]; // use the id |
| } |
| names[6] = |
| TimeZoneNameUtility.retrieveGenericDisplayName(id, TimeZone.SHORT, locale); |
| */ |
| TimeZoneNames timeZoneNames = TimeZoneNames.getInstance(locale); |
| names = new String[TYPES.length + 1]; |
| // Zeroth index used for id, other indexes based on NameType constant + 1. |
| names[0] = id; |
| String canonicalId = ZoneMeta.getCanonicalCLDRID(id); |
| timeZoneNames.getDisplayNames(canonicalId, TYPES, System.currentTimeMillis(), |
| /* dest */ names, /* destoffset */ 1); |
| if (names == null) { |
| return null; |
| } |
| if (names[1] == null || names[2] == null || names[3] == null || names[4] == null) { |
| // Use "GMT+XX:XX" analogous to java.util.TimeZone.getDisplayName() |
| TimeZone tz = TimeZone.getTimeZone(id); |
| String stdString = TimeZone.createGmtOffsetString( |
| /* includeGmt */ true, /* includeMinuteSeparator */ true, |
| tz.getRawOffset()); |
| String dstString = TimeZone.createGmtOffsetString( |
| /* includeGmt */ true, /* includeMinuteSeparator */ true, |
| tz.getRawOffset() + tz.getDSTSavings()); |
| names[1] = names[1] != null ? names[1] : stdString; |
| names[2] = names[2] != null ? names[2] : stdString; |
| names[3] = names[3] != null ? names[3] : dstString; |
| names[4] = names[4] != null ? names[4] : dstString; |
| } |
| if (names[5] == null) { |
| names[5] = names[0]; // use the id |
| } |
| // END Android-changed: use ICU TimeZoneNames instead of TimeZoneNameUtility. |
| if (names[6] == null) { |
| names[6] = names[0]; |
| } |
| if (perLocale == null) { |
| perLocale = new ConcurrentHashMap<>(); |
| } |
| perLocale.put(locale, names); |
| cache.put(id, new SoftReference<>(perLocale)); |
| } |
| switch (type) { |
| case STD: |
| return names[textStyle.zoneNameStyleIndex() + 1]; |
| case DST: |
| return names[textStyle.zoneNameStyleIndex() + 3]; |
| } |
| return names[textStyle.zoneNameStyleIndex() + 5]; |
| } |
| |
| @Override |
| public boolean format(DateTimePrintContext context, StringBuilder buf) { |
| ZoneId zone = context.getValue(TemporalQueries.zoneId()); |
| if (zone == null) { |
| return false; |
| } |
| String zname = zone.getId(); |
| if (!(zone instanceof ZoneOffset)) { |
| TemporalAccessor dt = context.getTemporal(); |
| String name = getDisplayName(zname, |
| dt.isSupported(ChronoField.INSTANT_SECONDS) |
| ? (zone.getRules().isDaylightSavings(Instant.from(dt)) ? DST : STD) |
| : GENERIC, |
| context.getLocale()); |
| if (name != null) { |
| zname = name; |
| } |
| } |
| buf.append(zname); |
| return true; |
| } |
| |
| // cache per instance for now |
| private final Map<Locale, Entry<Integer, SoftReference<PrefixTree>>> |
| cachedTree = new HashMap<>(); |
| private final Map<Locale, Entry<Integer, SoftReference<PrefixTree>>> |
| cachedTreeCI = new HashMap<>(); |
| |
| @Override |
| protected PrefixTree getTree(DateTimeParseContext context) { |
| if (textStyle == TextStyle.NARROW) { |
| return super.getTree(context); |
| } |
| Locale locale = context.getLocale(); |
| boolean isCaseSensitive = context.isCaseSensitive(); |
| Set<String> regionIds = ZoneRulesProvider.getAvailableZoneIds(); |
| int regionIdsSize = regionIds.size(); |
| |
| Map<Locale, Entry<Integer, SoftReference<PrefixTree>>> cached = |
| isCaseSensitive ? cachedTree : cachedTreeCI; |
| |
| Entry<Integer, SoftReference<PrefixTree>> entry = null; |
| PrefixTree tree = null; |
| String[][] zoneStrings = null; |
| if ((entry = cached.get(locale)) == null || |
| (entry.getKey() != regionIdsSize || |
| (tree = entry.getValue().get()) == null)) { |
| tree = PrefixTree.newTree(context); |
| // BEGIN Android-changed: use ICU TimeZoneNames to get Zone names. |
| /* |
| zoneStrings = TimeZoneNameUtility.getZoneStrings(locale); |
| for (String[] names : zoneStrings) { |
| String zid = names[0]; |
| if (!regionIds.contains(zid)) { |
| continue; |
| } |
| tree.add(zid, zid); // don't convert zid -> metazone |
| zid = ZoneName.toZid(zid, locale); |
| int i = textStyle == TextStyle.FULL ? 1 : 2; |
| for (; i < names.length; i += 2) { |
| tree.add(names[i], zid); |
| } |
| } |
| // if we have a set of preferred zones, need a copy and |
| // add the preferred zones again to overwrite |
| if (preferredZones != null) { |
| for (String[] names : zoneStrings) { |
| String zid = names[0]; |
| if (!preferredZones.contains(zid) || !regionIds.contains(zid)) { |
| continue; |
| } |
| int i = textStyle == TextStyle.FULL ? 1 : 2; |
| for (; i < names.length; i += 2) { |
| tree.add(names[i], zid); |
| } |
| } |
| } |
| */ |
| TimeZoneNames timeZoneNames = TimeZoneNames.getInstance(locale); |
| long now = System.currentTimeMillis(); |
| TimeZoneNames.NameType[] types = |
| textStyle == TextStyle.FULL ? FULL_TYPES : SHORT_TYPES; |
| String[] names = new String[types.length]; |
| for (String zid : regionIds) { |
| tree.add(zid, zid); // don't convert zid -> metazone |
| zid = ZoneName.toZid(zid, locale); |
| timeZoneNames.getDisplayNames(zid, types, now, names, 0); |
| for (int i = 0; i < names.length; i++) { |
| if (names[i] != null) { |
| tree.add(names[i], zid); |
| } |
| } |
| } |
| // if we have a set of preferred zones, need a copy and |
| // add the preferred zones again to overwrite |
| if (preferredZones != null) { |
| for (String zid : regionIds) { |
| if (!preferredZones.contains(zid)) { |
| continue; |
| } |
| String canonicalId = ZoneName.toZid(zid, locale); |
| timeZoneNames.getDisplayNames(canonicalId, types, now, names, 0); |
| for (int i = 0; i < names.length; i++) { |
| if (names[i] != null) { |
| tree.add(names[i], zid); |
| } |
| } |
| } |
| } |
| // END Android-changed: use ICU TimeZoneNames to get Zone names. |
| cached.put(locale, new SimpleImmutableEntry<>(regionIdsSize, new SoftReference<>(tree))); |
| } |
| return tree; |
| } |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Prints or parses a zone ID. |
| */ |
| static class ZoneIdPrinterParser implements DateTimePrinterParser { |
| private final TemporalQuery<ZoneId> query; |
| private final String description; |
| |
| ZoneIdPrinterParser(TemporalQuery<ZoneId> query, String description) { |
| this.query = query; |
| this.description = description; |
| } |
| |
| @Override |
| public boolean format(DateTimePrintContext context, StringBuilder buf) { |
| ZoneId zone = context.getValue(query); |
| if (zone == null) { |
| return false; |
| } |
| buf.append(zone.getId()); |
| return true; |
| } |
| |
| /** |
| * The cached tree to speed up parsing. |
| */ |
| private static volatile Entry<Integer, PrefixTree> cachedPrefixTree; |
| private static volatile Entry<Integer, PrefixTree> cachedPrefixTreeCI; |
| |
| protected PrefixTree getTree(DateTimeParseContext context) { |
| // prepare parse tree |
| Set<String> regionIds = ZoneRulesProvider.getAvailableZoneIds(); |
| final int regionIdsSize = regionIds.size(); |
| Entry<Integer, PrefixTree> cached = context.isCaseSensitive() |
| ? cachedPrefixTree : cachedPrefixTreeCI; |
| if (cached == null || cached.getKey() != regionIdsSize) { |
| synchronized (this) { |
| cached = context.isCaseSensitive() ? cachedPrefixTree : cachedPrefixTreeCI; |
| if (cached == null || cached.getKey() != regionIdsSize) { |
| cached = new SimpleImmutableEntry<>(regionIdsSize, PrefixTree.newTree(regionIds, context)); |
| if (context.isCaseSensitive()) { |
| cachedPrefixTree = cached; |
| } else { |
| cachedPrefixTreeCI = cached; |
| } |
| } |
| } |
| } |
| return cached.getValue(); |
| } |
| |
| /** |
| * This implementation looks for the longest matching string. |
| * For example, parsing Etc/GMT-2 will return Etc/GMC-2 rather than just |
| * Etc/GMC although both are valid. |
| */ |
| @Override |
| public int parse(DateTimeParseContext context, CharSequence text, int position) { |
| int length = text.length(); |
| if (position > length) { |
| throw new IndexOutOfBoundsException(); |
| } |
| if (position == length) { |
| return ~position; |
| } |
| |
| // handle fixed time-zone IDs |
| char nextChar = text.charAt(position); |
| if (nextChar == '+' || nextChar == '-') { |
| return parseOffsetBased(context, text, position, position, OffsetIdPrinterParser.INSTANCE_ID_Z); |
| } else if (length >= position + 2) { |
| char nextNextChar = text.charAt(position + 1); |
| if (context.charEquals(nextChar, 'U') && context.charEquals(nextNextChar, 'T')) { |
| if (length >= position + 3 && context.charEquals(text.charAt(position + 2), 'C')) { |
| return parseOffsetBased(context, text, position, position + 3, OffsetIdPrinterParser.INSTANCE_ID_ZERO); |
| } |
| return parseOffsetBased(context, text, position, position + 2, OffsetIdPrinterParser.INSTANCE_ID_ZERO); |
| } else if (context.charEquals(nextChar, 'G') && length >= position + 3 && |
| context.charEquals(nextNextChar, 'M') && context.charEquals(text.charAt(position + 2), 'T')) { |
| return parseOffsetBased(context, text, position, position + 3, OffsetIdPrinterParser.INSTANCE_ID_ZERO); |
| } |
| } |
| |
| // parse |
| PrefixTree tree = getTree(context); |
| ParsePosition ppos = new ParsePosition(position); |
| String parsedZoneId = tree.match(text, ppos); |
| if (parsedZoneId == null) { |
| if (context.charEquals(nextChar, 'Z')) { |
| context.setParsed(ZoneOffset.UTC); |
| return position + 1; |
| } |
| return ~position; |
| } |
| context.setParsed(ZoneId.of(parsedZoneId)); |
| return ppos.getIndex(); |
| } |
| |
| /** |
| * Parse an offset following a prefix and set the ZoneId if it is valid. |
| * To matching the parsing of ZoneId.of the values are not normalized |
| * to ZoneOffsets. |
| * |
| * @param context the parse context |
| * @param text the input text |
| * @param prefixPos start of the prefix |
| * @param position start of text after the prefix |
| * @param parser parser for the value after the prefix |
| * @return the position after the parse |
| */ |
| private int parseOffsetBased(DateTimeParseContext context, CharSequence text, int prefixPos, int position, OffsetIdPrinterParser parser) { |
| String prefix = text.toString().substring(prefixPos, position).toUpperCase(); |
| if (position >= text.length()) { |
| context.setParsed(ZoneId.of(prefix)); |
| return position; |
| } |
| |
| // Android-added: "GMT0" is considered a valid ZoneId. |
| if (text.charAt(position) == '0' && prefix.equals("GMT")) { |
| context.setParsed(ZoneId.of("GMT0")); |
| return position + 1; |
| } |
| |
| // '0' or 'Z' after prefix is not part of a valid ZoneId; use bare prefix |
| if (text.charAt(position) == '0' || |
| context.charEquals(text.charAt(position), 'Z')) { |
| context.setParsed(ZoneId.of(prefix)); |
| return position; |
| } |
| |
| DateTimeParseContext newContext = context.copy(); |
| int endPos = parser.parse(newContext, text, position); |
| try { |
| if (endPos < 0) { |
| if (parser == OffsetIdPrinterParser.INSTANCE_ID_Z) { |
| return ~prefixPos; |
| } |
| context.setParsed(ZoneId.of(prefix)); |
| return position; |
| } |
| int offset = (int) newContext.getParsed(OFFSET_SECONDS).longValue(); |
| ZoneOffset zoneOffset = ZoneOffset.ofTotalSeconds(offset); |
| context.setParsed(ZoneId.ofOffset(prefix, zoneOffset)); |
| return endPos; |
| } catch (DateTimeException dte) { |
| return ~prefixPos; |
| } |
| } |
| |
| @Override |
| public String toString() { |
| return description; |
| } |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * A String based prefix tree for parsing time-zone names. |
| */ |
| static class PrefixTree { |
| protected String key; |
| protected String value; |
| protected char c0; // performance optimization to avoid the |
| // boundary check cost of key.charat(0) |
| protected PrefixTree child; |
| protected PrefixTree sibling; |
| |
| private PrefixTree(String k, String v, PrefixTree child) { |
| this.key = k; |
| this.value = v; |
| this.child = child; |
| if (k.length() == 0){ |
| c0 = 0xffff; |
| } else { |
| c0 = key.charAt(0); |
| } |
| } |
| |
| /** |
| * Creates a new prefix parsing tree based on parse context. |
| * |
| * @param context the parse context |
| * @return the tree, not null |
| */ |
| public static PrefixTree newTree(DateTimeParseContext context) { |
| //if (!context.isStrict()) { |
| // return new LENIENT("", null, null); |
| //} |
| if (context.isCaseSensitive()) { |
| return new PrefixTree("", null, null); |
| } |
| return new CI("", null, null); |
| } |
| |
| /** |
| * Creates a new prefix parsing tree. |
| * |
| * @param keys a set of strings to build the prefix parsing tree, not null |
| * @param context the parse context |
| * @return the tree, not null |
| */ |
| public static PrefixTree newTree(Set<String> keys, DateTimeParseContext context) { |
| PrefixTree tree = newTree(context); |
| for (String k : keys) { |
| tree.add0(k, k); |
| } |
| return tree; |
| } |
| |
| /** |
| * Clone a copy of this tree |
| */ |
| public PrefixTree copyTree() { |
| PrefixTree copy = new PrefixTree(key, value, null); |
| if (child != null) { |
| copy.child = child.copyTree(); |
| } |
| if (sibling != null) { |
| copy.sibling = sibling.copyTree(); |
| } |
| return copy; |
| } |
| |
| |
| /** |
| * Adds a pair of {key, value} into the prefix tree. |
| * |
| * @param k the key, not null |
| * @param v the value, not null |
| * @return true if the pair is added successfully |
| */ |
| public boolean add(String k, String v) { |
| return add0(k, v); |
| } |
| |
| private boolean add0(String k, String v) { |
| k = toKey(k); |
| int prefixLen = prefixLength(k); |
| if (prefixLen == key.length()) { |
| if (prefixLen < k.length()) { // down the tree |
| String subKey = k.substring(prefixLen); |
| PrefixTree c = child; |
| while (c != null) { |
| if (isEqual(c.c0, subKey.charAt(0))) { |
| return c.add0(subKey, v); |
| } |
| c = c.sibling; |
| } |
| // add the node as the child of the current node |
| c = newNode(subKey, v, null); |
| c.sibling = child; |
| child = c; |
| return true; |
| } |
| // have an existing <key, value> already, overwrite it |
| // if (value != null) { |
| // return false; |
| //} |
| value = v; |
| return true; |
| } |
| // split the existing node |
| PrefixTree n1 = newNode(key.substring(prefixLen), value, child); |
| key = k.substring(0, prefixLen); |
| child = n1; |
| if (prefixLen < k.length()) { |
| PrefixTree n2 = newNode(k.substring(prefixLen), v, null); |
| child.sibling = n2; |
| value = null; |
| } else { |
| value = v; |
| } |
| return true; |
| } |
| |
| /** |
| * Match text with the prefix tree. |
| * |
| * @param text the input text to parse, not null |
| * @param off the offset position to start parsing at |
| * @param end the end position to stop parsing |
| * @return the resulting string, or null if no match found. |
| */ |
| public String match(CharSequence text, int off, int end) { |
| if (!prefixOf(text, off, end)){ |
| return null; |
| } |
| if (child != null && (off += key.length()) != end) { |
| PrefixTree c = child; |
| do { |
| if (isEqual(c.c0, text.charAt(off))) { |
| String found = c.match(text, off, end); |
| if (found != null) { |
| return found; |
| } |
| return value; |
| } |
| c = c.sibling; |
| } while (c != null); |
| } |
| return value; |
| } |
| |
| /** |
| * Match text with the prefix tree. |
| * |
| * @param text the input text to parse, not null |
| * @param pos the position to start parsing at, from 0 to the text |
| * length. Upon return, position will be updated to the new parse |
| * position, or unchanged, if no match found. |
| * @return the resulting string, or null if no match found. |
| */ |
| public String match(CharSequence text, ParsePosition pos) { |
| int off = pos.getIndex(); |
| int end = text.length(); |
| if (!prefixOf(text, off, end)){ |
| return null; |
| } |
| off += key.length(); |
| if (child != null && off != end) { |
| PrefixTree c = child; |
| do { |
| if (isEqual(c.c0, text.charAt(off))) { |
| pos.setIndex(off); |
| String found = c.match(text, pos); |
| if (found != null) { |
| return found; |
| } |
| break; |
| } |
| c = c.sibling; |
| } while (c != null); |
| } |
| pos.setIndex(off); |
| return value; |
| } |
| |
| protected String toKey(String k) { |
| return k; |
| } |
| |
| protected PrefixTree newNode(String k, String v, PrefixTree child) { |
| return new PrefixTree(k, v, child); |
| } |
| |
| protected boolean isEqual(char c1, char c2) { |
| return c1 == c2; |
| } |
| |
| protected boolean prefixOf(CharSequence text, int off, int end) { |
| if (text instanceof String) { |
| return ((String)text).startsWith(key, off); |
| } |
| int len = key.length(); |
| if (len > end - off) { |
| return false; |
| } |
| int off0 = 0; |
| while (len-- > 0) { |
| if (!isEqual(key.charAt(off0++), text.charAt(off++))) { |
| return false; |
| } |
| } |
| return true; |
| } |
| |
| private int prefixLength(String k) { |
| int off = 0; |
| while (off < k.length() && off < key.length()) { |
| if (!isEqual(k.charAt(off), key.charAt(off))) { |
| return off; |
| } |
| off++; |
| } |
| return off; |
| } |
| |
| /** |
| * Case Insensitive prefix tree. |
| */ |
| private static class CI extends PrefixTree { |
| |
| private CI(String k, String v, PrefixTree child) { |
| super(k, v, child); |
| } |
| |
| @Override |
| protected CI newNode(String k, String v, PrefixTree child) { |
| return new CI(k, v, child); |
| } |
| |
| @Override |
| protected boolean isEqual(char c1, char c2) { |
| return DateTimeParseContext.charEqualsIgnoreCase(c1, c2); |
| } |
| |
| @Override |
| protected boolean prefixOf(CharSequence text, int off, int end) { |
| int len = key.length(); |
| if (len > end - off) { |
| return false; |
| } |
| int off0 = 0; |
| while (len-- > 0) { |
| if (!isEqual(key.charAt(off0++), text.charAt(off++))) { |
| return false; |
| } |
| } |
| return true; |
| } |
| } |
| |
| /** |
| * Lenient prefix tree. Case insensitive and ignores characters |
| * like space, underscore and slash. |
| */ |
| private static class LENIENT extends CI { |
| |
| private LENIENT(String k, String v, PrefixTree child) { |
| super(k, v, child); |
| } |
| |
| @Override |
| protected CI newNode(String k, String v, PrefixTree child) { |
| return new LENIENT(k, v, child); |
| } |
| |
| private boolean isLenientChar(char c) { |
| return c == ' ' || c == '_' || c == '/'; |
| } |
| |
| protected String toKey(String k) { |
| for (int i = 0; i < k.length(); i++) { |
| if (isLenientChar(k.charAt(i))) { |
| StringBuilder sb = new StringBuilder(k.length()); |
| sb.append(k, 0, i); |
| i++; |
| while (i < k.length()) { |
| if (!isLenientChar(k.charAt(i))) { |
| sb.append(k.charAt(i)); |
| } |
| i++; |
| } |
| return sb.toString(); |
| } |
| } |
| return k; |
| } |
| |
| @Override |
| public String match(CharSequence text, ParsePosition pos) { |
| int off = pos.getIndex(); |
| int end = text.length(); |
| int len = key.length(); |
| int koff = 0; |
| while (koff < len && off < end) { |
| if (isLenientChar(text.charAt(off))) { |
| off++; |
| continue; |
| } |
| if (!isEqual(key.charAt(koff++), text.charAt(off++))) { |
| return null; |
| } |
| } |
| if (koff != len) { |
| return null; |
| } |
| if (child != null && off != end) { |
| int off0 = off; |
| while (off0 < end && isLenientChar(text.charAt(off0))) { |
| off0++; |
| } |
| if (off0 < end) { |
| PrefixTree c = child; |
| do { |
| if (isEqual(c.c0, text.charAt(off0))) { |
| pos.setIndex(off0); |
| String found = c.match(text, pos); |
| if (found != null) { |
| return found; |
| } |
| break; |
| } |
| c = c.sibling; |
| } while (c != null); |
| } |
| } |
| pos.setIndex(off); |
| return value; |
| } |
| } |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Prints or parses a chronology. |
| */ |
| static final class ChronoPrinterParser implements DateTimePrinterParser { |
| /** The text style to output, null means the ID. */ |
| private final TextStyle textStyle; |
| |
| ChronoPrinterParser(TextStyle textStyle) { |
| // validated by caller |
| this.textStyle = textStyle; |
| } |
| |
| @Override |
| public boolean format(DateTimePrintContext context, StringBuilder buf) { |
| Chronology chrono = context.getValue(TemporalQueries.chronology()); |
| if (chrono == null) { |
| return false; |
| } |
| if (textStyle == null) { |
| buf.append(chrono.getId()); |
| } else { |
| buf.append(getChronologyName(chrono, context.getLocale())); |
| } |
| return true; |
| } |
| |
| @Override |
| public int parse(DateTimeParseContext context, CharSequence text, int position) { |
| // simple looping parser to find the chronology |
| if (position < 0 || position > text.length()) { |
| throw new IndexOutOfBoundsException(); |
| } |
| Set<Chronology> chronos = Chronology.getAvailableChronologies(); |
| Chronology bestMatch = null; |
| int matchLen = -1; |
| for (Chronology chrono : chronos) { |
| String name; |
| if (textStyle == null) { |
| name = chrono.getId(); |
| } else { |
| name = getChronologyName(chrono, context.getLocale()); |
| } |
| int nameLen = name.length(); |
| if (nameLen > matchLen && context.subSequenceEquals(text, position, name, 0, nameLen)) { |
| bestMatch = chrono; |
| matchLen = nameLen; |
| } |
| } |
| if (bestMatch == null) { |
| return ~position; |
| } |
| context.setParsed(bestMatch); |
| return position + matchLen; |
| } |
| |
| /** |
| * Returns the chronology name of the given chrono in the given locale |
| * if available, or the chronology Id otherwise. The regular ResourceBundle |
| * search path is used for looking up the chronology name. |
| * |
| * @param chrono the chronology, not null |
| * @param locale the locale, not null |
| * @return the chronology name of chrono in locale, or the id if no name is available |
| * @throws NullPointerException if chrono or locale is null |
| */ |
| private String getChronologyName(Chronology chrono, Locale locale) { |
| // Android-changed: Use ICU LocaleDisplayNames. http://b/28832222 |
| // String key = "calendarname." + chrono.getCalendarType(); |
| // String name = DateTimeTextProvider.getLocalizedResource(key, locale); |
| LocaleDisplayNames displayNames = LocaleDisplayNames.getInstance(ULocale.forLocale(locale)); |
| String name = displayNames.keyValueDisplayName("calendar", chrono.getCalendarType()); |
| return name != null ? name : chrono.getId(); |
| } |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Prints or parses a localized pattern. |
| */ |
| static final class LocalizedPrinterParser implements DateTimePrinterParser { |
| /** Cache of formatters. */ |
| private static final ConcurrentMap<String, DateTimeFormatter> FORMATTER_CACHE = new ConcurrentHashMap<>(16, 0.75f, 2); |
| |
| private final FormatStyle dateStyle; |
| private final FormatStyle timeStyle; |
| |
| /** |
| * Constructor. |
| * |
| * @param dateStyle the date style to use, may be null |
| * @param timeStyle the time style to use, may be null |
| */ |
| LocalizedPrinterParser(FormatStyle dateStyle, FormatStyle timeStyle) { |
| // validated by caller |
| this.dateStyle = dateStyle; |
| this.timeStyle = timeStyle; |
| } |
| |
| @Override |
| public boolean format(DateTimePrintContext context, StringBuilder buf) { |
| Chronology chrono = Chronology.from(context.getTemporal()); |
| return formatter(context.getLocale(), chrono).toPrinterParser(false).format(context, buf); |
| } |
| |
| @Override |
| public int parse(DateTimeParseContext context, CharSequence text, int position) { |
| Chronology chrono = context.getEffectiveChronology(); |
| return formatter(context.getLocale(), chrono).toPrinterParser(false).parse(context, text, position); |
| } |
| |
| /** |
| * Gets the formatter to use. |
| * <p> |
| * The formatter will be the most appropriate to use for the date and time style in the locale. |
| * For example, some locales will use the month name while others will use the number. |
| * |
| * @param locale the locale to use, not null |
| * @param chrono the chronology to use, not null |
| * @return the formatter, not null |
| * @throws IllegalArgumentException if the formatter cannot be found |
| */ |
| private DateTimeFormatter formatter(Locale locale, Chronology chrono) { |
| String key = chrono.getId() + '|' + locale.toString() + '|' + dateStyle + timeStyle; |
| DateTimeFormatter formatter = FORMATTER_CACHE.get(key); |
| if (formatter == null) { |
| String pattern = getLocalizedDateTimePattern(dateStyle, timeStyle, chrono, locale); |
| formatter = new DateTimeFormatterBuilder().appendPattern(pattern).toFormatter(locale); |
| DateTimeFormatter old = FORMATTER_CACHE.putIfAbsent(key, formatter); |
| if (old != null) { |
| formatter = old; |
| } |
| } |
| return formatter; |
| } |
| |
| @Override |
| public String toString() { |
| return "Localized(" + (dateStyle != null ? dateStyle : "") + "," + |
| (timeStyle != null ? timeStyle : "") + ")"; |
| } |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Prints or parses a localized pattern from a localized field. |
| * The specific formatter and parameters is not selected until the |
| * the field is to be printed or parsed. |
| * The locale is needed to select the proper WeekFields from which |
| * the field for day-of-week, week-of-month, or week-of-year is selected. |
| */ |
| static final class WeekBasedFieldPrinterParser implements DateTimePrinterParser { |
| private char chr; |
| private int count; |
| |
| /** |
| * Constructor. |
| * |
| * @param chr the pattern format letter that added this PrinterParser. |
| * @param count the repeat count of the format letter |
| */ |
| WeekBasedFieldPrinterParser(char chr, int count) { |
| this.chr = chr; |
| this.count = count; |
| } |
| |
| @Override |
| public boolean format(DateTimePrintContext context, StringBuilder buf) { |
| return printerParser(context.getLocale()).format(context, buf); |
| } |
| |
| @Override |
| public int parse(DateTimeParseContext context, CharSequence text, int position) { |
| return printerParser(context.getLocale()).parse(context, text, position); |
| } |
| |
| /** |
| * Gets the printerParser to use based on the field and the locale. |
| * |
| * @param locale the locale to use, not null |
| * @return the formatter, not null |
| * @throws IllegalArgumentException if the formatter cannot be found |
| */ |
| private DateTimePrinterParser printerParser(Locale locale) { |
| WeekFields weekDef = WeekFields.of(locale); |
| TemporalField field = null; |
| switch (chr) { |
| case 'Y': |
| field = weekDef.weekBasedYear(); |
| if (count == 2) { |
| return new ReducedPrinterParser(field, 2, 2, 0, ReducedPrinterParser.BASE_DATE, 0); |
| } else { |
| return new NumberPrinterParser(field, count, 19, |
| (count < 4) ? SignStyle.NORMAL : SignStyle.EXCEEDS_PAD, -1); |
| } |
| case 'e': |
| case 'c': |
| field = weekDef.dayOfWeek(); |
| break; |
| case 'w': |
| field = weekDef.weekOfWeekBasedYear(); |
| break; |
| case 'W': |
| field = weekDef.weekOfMonth(); |
| break; |
| default: |
| throw new IllegalStateException("unreachable"); |
| } |
| return new NumberPrinterParser(field, (count == 2 ? 2 : 1), 2, SignStyle.NOT_NEGATIVE); |
| } |
| |
| @Override |
| public String toString() { |
| StringBuilder sb = new StringBuilder(30); |
| sb.append("Localized("); |
| if (chr == 'Y') { |
| if (count == 1) { |
| sb.append("WeekBasedYear"); |
| } else if (count == 2) { |
| sb.append("ReducedValue(WeekBasedYear,2,2,2000-01-01)"); |
| } else { |
| sb.append("WeekBasedYear,").append(count).append(",") |
| .append(19).append(",") |
| .append((count < 4) ? SignStyle.NORMAL : SignStyle.EXCEEDS_PAD); |
| } |
| } else { |
| switch (chr) { |
| case 'c': |
| case 'e': |
| sb.append("DayOfWeek"); |
| break; |
| case 'w': |
| sb.append("WeekOfWeekBasedYear"); |
| break; |
| case 'W': |
| sb.append("WeekOfMonth"); |
| break; |
| default: |
| break; |
| } |
| sb.append(","); |
| sb.append(count); |
| } |
| sb.append(")"); |
| return sb.toString(); |
| } |
| } |
| |
| //------------------------------------------------------------------------- |
| /** |
| * Length comparator. |
| */ |
| static final Comparator<String> LENGTH_SORT = new Comparator<String>() { |
| @Override |
| public int compare(String str1, String str2) { |
| return str1.length() == str2.length() ? str1.compareTo(str2) : str1.length() - str2.length(); |
| } |
| }; |
| } |