| /* |
| * Copyright (c) 2012, 2013, Oracle and/or its affiliates. All rights reserved. |
| * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
| * |
| * This code is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 only, as |
| * published by the Free Software Foundation. Oracle designates this |
| * particular file as subject to the "Classpath" exception as provided |
| * by Oracle in the LICENSE file that accompanied this code. |
| * |
| * This code is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * version 2 for more details (a copy is included in the LICENSE file that |
| * accompanied this code). |
| * |
| * You should have received a copy of the GNU General Public License version |
| * 2 along with this work; if not, write to the Free Software Foundation, |
| * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. |
| * |
| * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA |
| * or visit www.oracle.com if you need additional information or have any |
| * questions. |
| */ |
| package java.util.stream; |
| |
| import java.util.Spliterator; |
| import java.util.function.IntFunction; |
| |
| /** |
| * Helper class for executing <a href="package-summary.html#StreamOps"> |
| * stream pipelines</a>, capturing all of the information about a stream |
| * pipeline (output shape, intermediate operations, stream flags, parallelism, |
| * etc) in one place. |
| * |
| * <p> |
| * A {@code PipelineHelper} describes the initial segment of a stream pipeline, |
| * including its source, intermediate operations, and may additionally |
| * incorporate information about the terminal (or stateful) operation which |
| * follows the last intermediate operation described by this |
| * {@code PipelineHelper}. The {@code PipelineHelper} is passed to the |
| * {@link TerminalOp#evaluateParallel(PipelineHelper, java.util.Spliterator)}, |
| * {@link TerminalOp#evaluateSequential(PipelineHelper, java.util.Spliterator)}, |
| * and {@link AbstractPipeline#opEvaluateParallel(PipelineHelper, java.util.Spliterator, |
| * java.util.function.IntFunction)}, methods, which can use the |
| * {@code PipelineHelper} to access information about the pipeline such as |
| * head shape, stream flags, and size, and use the helper methods |
| * such as {@link #wrapAndCopyInto(Sink, Spliterator)}, |
| * {@link #copyInto(Sink, Spliterator)}, and {@link #wrapSink(Sink)} to execute |
| * pipeline operations. |
| * |
| * @param <P_OUT> type of output elements from the pipeline |
| * @since 1.8 |
| * @hide Visible for CTS testing only (OpenJDK8 tests). |
| */ |
| // Android-changed: Made public for CTS tests only. |
| public abstract class PipelineHelper<P_OUT> { |
| |
| /** |
| * Gets the stream shape for the source of the pipeline segment. |
| * |
| * @return the stream shape for the source of the pipeline segment. |
| */ |
| abstract StreamShape getSourceShape(); |
| |
| /** |
| * Gets the combined stream and operation flags for the output of the described |
| * pipeline. This will incorporate stream flags from the stream source, all |
| * the intermediate operations and the terminal operation. |
| * |
| * @return the combined stream and operation flags |
| * @see StreamOpFlag |
| */ |
| // Android-changed: Made public for CTS tests only. |
| public abstract int getStreamAndOpFlags(); |
| |
| /** |
| * Returns the exact output size of the portion of the output resulting from |
| * applying the pipeline stages described by this {@code PipelineHelper} to |
| * the the portion of the input described by the provided |
| * {@code Spliterator}, if known. If not known or known infinite, will |
| * return {@code -1}. |
| * |
| * @apiNote |
| * The exact output size is known if the {@code Spliterator} has the |
| * {@code SIZED} characteristic, and the operation flags |
| * {@link StreamOpFlag#SIZED} is known on the combined stream and operation |
| * flags. |
| * |
| * @param spliterator the spliterator describing the relevant portion of the |
| * source data |
| * @return the exact size if known, or -1 if infinite or unknown |
| */ |
| abstract<P_IN> long exactOutputSizeIfKnown(Spliterator<P_IN> spliterator); |
| |
| /** |
| * Applies the pipeline stages described by this {@code PipelineHelper} to |
| * the provided {@code Spliterator} and send the results to the provided |
| * {@code Sink}. |
| * |
| * @implSpec |
| * The implementation behaves as if: |
| * <pre>{@code |
| * intoWrapped(wrapSink(sink), spliterator); |
| * }</pre> |
| * |
| * @param sink the {@code Sink} to receive the results |
| * @param spliterator the spliterator describing the source input to process |
| */ |
| abstract<P_IN, S extends Sink<P_OUT>> S wrapAndCopyInto(S sink, Spliterator<P_IN> spliterator); |
| |
| /** |
| * Pushes elements obtained from the {@code Spliterator} into the provided |
| * {@code Sink}. If the stream pipeline is known to have short-circuiting |
| * stages in it (see {@link StreamOpFlag#SHORT_CIRCUIT}), the |
| * {@link Sink#cancellationRequested()} is checked after each |
| * element, stopping if cancellation is requested. |
| * |
| * @implSpec |
| * This method conforms to the {@code Sink} protocol of calling |
| * {@code Sink.begin} before pushing elements, via {@code Sink.accept}, and |
| * calling {@code Sink.end} after all elements have been pushed. |
| * |
| * @param wrappedSink the destination {@code Sink} |
| * @param spliterator the source {@code Spliterator} |
| */ |
| abstract<P_IN> void copyInto(Sink<P_IN> wrappedSink, Spliterator<P_IN> spliterator); |
| |
| /** |
| * Pushes elements obtained from the {@code Spliterator} into the provided |
| * {@code Sink}, checking {@link Sink#cancellationRequested()} after each |
| * element, and stopping if cancellation is requested. |
| * |
| * @implSpec |
| * This method conforms to the {@code Sink} protocol of calling |
| * {@code Sink.begin} before pushing elements, via {@code Sink.accept}, and |
| * calling {@code Sink.end} after all elements have been pushed or if |
| * cancellation is requested. |
| * |
| * @param wrappedSink the destination {@code Sink} |
| * @param spliterator the source {@code Spliterator} |
| */ |
| abstract <P_IN> void copyIntoWithCancel(Sink<P_IN> wrappedSink, Spliterator<P_IN> spliterator); |
| |
| /** |
| * Takes a {@code Sink} that accepts elements of the output type of the |
| * {@code PipelineHelper}, and wrap it with a {@code Sink} that accepts |
| * elements of the input type and implements all the intermediate operations |
| * described by this {@code PipelineHelper}, delivering the result into the |
| * provided {@code Sink}. |
| * |
| * @param sink the {@code Sink} to receive the results |
| * @return a {@code Sink} that implements the pipeline stages and sends |
| * results to the provided {@code Sink} |
| */ |
| // Android-changed: Made public for CTS tests only. |
| public abstract<P_IN> Sink<P_IN> wrapSink(Sink<P_OUT> sink); |
| |
| /** |
| * |
| * @param spliterator |
| * @param <P_IN> |
| * @return |
| */ |
| abstract<P_IN> Spliterator<P_OUT> wrapSpliterator(Spliterator<P_IN> spliterator); |
| |
| /** |
| * Constructs a @{link Node.Builder} compatible with the output shape of |
| * this {@code PipelineHelper}. |
| * |
| * @param exactSizeIfKnown if >=0 then a builder will be created that has a |
| * fixed capacity of exactly sizeIfKnown elements; if < 0 then the |
| * builder has variable capacity. A fixed capacity builder will fail |
| * if an element is added after the builder has reached capacity. |
| * @param generator a factory function for array instances |
| * @return a {@code Node.Builder} compatible with the output shape of this |
| * {@code PipelineHelper} |
| */ |
| abstract Node.Builder<P_OUT> makeNodeBuilder(long exactSizeIfKnown, |
| IntFunction<P_OUT[]> generator); |
| |
| /** |
| * Collects all output elements resulting from applying the pipeline stages |
| * to the source {@code Spliterator} into a {@code Node}. |
| * |
| * @implNote |
| * If the pipeline has no intermediate operations and the source is backed |
| * by a {@code Node} then that {@code Node} will be returned (or flattened |
| * and then returned). This reduces copying for a pipeline consisting of a |
| * stateful operation followed by a terminal operation that returns an |
| * array, such as: |
| * <pre>{@code |
| * stream.sorted().toArray(); |
| * }</pre> |
| * |
| * @param spliterator the source {@code Spliterator} |
| * @param flatten if true and the pipeline is a parallel pipeline then the |
| * {@code Node} returned will contain no children, otherwise the |
| * {@code Node} may represent the root in a tree that reflects the |
| * shape of the computation tree. |
| * @param generator a factory function for array instances |
| * @return the {@code Node} containing all output elements |
| */ |
| // Android-changed: Made public for CTS tests only. |
| public abstract<P_IN> Node<P_OUT> evaluate(Spliterator<P_IN> spliterator, |
| boolean flatten, |
| IntFunction<P_OUT[]> generator); |
| } |
