| <?xml version="1.0" encoding="utf-8"?> |
| <!-- |
| /* |
| ** Copyright 2009, The Android Open Source Project |
| ** |
| ** Licensed under the Apache License, Version 2.0 (the "License"); |
| ** you may not use this file except in compliance with the License. |
| ** You may obtain a copy of the License at |
| ** |
| ** http://www.apache.org/licenses/LICENSE-2.0 |
| ** |
| ** Unless required by applicable law or agreed to in writing, software |
| ** distributed under the License is distributed on an "AS IS" BASIS, |
| ** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| ** See the License for the specific language governing permissions and |
| ** limitations under the License. |
| */ |
| --> |
| |
| <!-- These resources are around just to allow their values to be customized |
| for different hardware and product builds. Do not translate. |
| |
| NOTE: The naming convention is "config_camelCaseValue". Some legacy |
| entries do not follow the convention, but all new entries should. --> |
| |
| <resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2"> |
| <!-- Do not translate. Defines the slots for the right-hand side icons. That is to say, the |
| icons in the status bar that are not notifications. --> |
| <string-array name="config_statusBarIcons"> |
| <item><xliff:g id="id">@string/status_bar_no_calling</xliff:g></item> |
| <item><xliff:g id="id">@string/status_bar_call_strength</xliff:g></item> |
| <item><xliff:g id="id">@string/status_bar_alarm_clock</xliff:g></item> |
| <item><xliff:g id="id">@string/status_bar_rotate</xliff:g></item> |
| <item><xliff:g id="id">@string/status_bar_headset</xliff:g></item> |
| <item><xliff:g id="id">@string/status_bar_data_saver</xliff:g></item> |
| <item><xliff:g id="id">@string/status_bar_ime</xliff:g></item> |
| <item><xliff:g id="id">@string/status_bar_sync_failing</xliff:g></item> |
| <item><xliff:g id="id">@string/status_bar_sync_active</xliff:g></item> |
| <item><xliff:g id="id">@string/status_bar_nfc</xliff:g></item> |
| <item><xliff:g id="id">@string/status_bar_tty</xliff:g></item> |
| <item><xliff:g id="id">@string/status_bar_speakerphone</xliff:g></item> |
| <item><xliff:g id="id">@string/status_bar_cdma_eri</xliff:g></item> |
| <item><xliff:g id="id">@string/status_bar_data_connection</xliff:g></item> |
| <item><xliff:g id="id">@string/status_bar_phone_evdo_signal</xliff:g></item> |
| <item><xliff:g id="id">@string/status_bar_phone_signal</xliff:g></item> |
| <item><xliff:g id="id">@string/status_bar_secure</xliff:g></item> |
| <item><xliff:g id="id">@string/status_bar_managed_profile</xliff:g></item> |
| <item><xliff:g id="id">@string/status_bar_cast</xliff:g></item> |
| <item><xliff:g id="id">@string/status_bar_screen_record</xliff:g></item> |
| <item><xliff:g id="id">@string/status_bar_vpn</xliff:g></item> |
| <item><xliff:g id="id">@string/status_bar_bluetooth</xliff:g></item> |
| <item><xliff:g id="id">@string/status_bar_camera</xliff:g></item> |
| <item><xliff:g id="id">@string/status_bar_microphone</xliff:g></item> |
| <item><xliff:g id="id">@string/status_bar_location</xliff:g></item> |
| <item><xliff:g id="id">@string/status_bar_mute</xliff:g></item> |
| <item><xliff:g id="id">@string/status_bar_volume</xliff:g></item> |
| <item><xliff:g id="id">@string/status_bar_zen</xliff:g></item> |
| <item><xliff:g id="id">@string/status_bar_ethernet</xliff:g></item> |
| <item><xliff:g id="id">@string/status_bar_wifi</xliff:g></item> |
| <item><xliff:g id="id">@string/status_bar_hotspot</xliff:g></item> |
| <item><xliff:g id="id">@string/status_bar_mobile</xliff:g></item> |
| <item><xliff:g id="id">@string/status_bar_airplane</xliff:g></item> |
| <item><xliff:g id="id">@string/status_bar_battery</xliff:g></item> |
| <item><xliff:g id="id">@string/status_bar_sensors_off</xliff:g></item> |
| </string-array> |
| |
| <string translatable="false" name="status_bar_rotate">rotate</string> |
| <string translatable="false" name="status_bar_headset">headset</string> |
| <string translatable="false" name="status_bar_data_saver">data_saver</string> |
| <string translatable="false" name="status_bar_managed_profile">managed_profile</string> |
| <string translatable="false" name="status_bar_ime">ime</string> |
| <string translatable="false" name="status_bar_sync_failing">sync_failing</string> |
| <string translatable="false" name="status_bar_sync_active">sync_active</string> |
| <string translatable="false" name="status_bar_cast">cast</string> |
| <string translatable="false" name="status_bar_hotspot">hotspot</string> |
| <string translatable="false" name="status_bar_location">location</string> |
| <string translatable="false" name="status_bar_bluetooth">bluetooth</string> |
| <string translatable="false" name="status_bar_nfc">nfc</string> |
| <string translatable="false" name="status_bar_tty">tty</string> |
| <string translatable="false" name="status_bar_speakerphone">speakerphone</string> |
| <string translatable="false" name="status_bar_zen">zen</string> |
| <string translatable="false" name="status_bar_mute">mute</string> |
| <string translatable="false" name="status_bar_volume">volume</string> |
| <string translatable="false" name="status_bar_wifi">wifi</string> |
| <string translatable="false" name="status_bar_cdma_eri">cdma_eri</string> |
| <string translatable="false" name="status_bar_data_connection">data_connection</string> |
| <string translatable="false" name="status_bar_phone_evdo_signal">phone_evdo_signal</string> |
| <string translatable="false" name="status_bar_phone_signal">phone_signal</string> |
| <string translatable="false" name="status_bar_battery">battery</string> |
| <string translatable="false" name="status_bar_alarm_clock">alarm_clock</string> |
| <string translatable="false" name="status_bar_secure">secure</string> |
| <string translatable="false" name="status_bar_clock">clock</string> |
| <string translatable="false" name="status_bar_mobile">mobile</string> |
| <string translatable="false" name="status_bar_vpn">vpn</string> |
| <string translatable="false" name="status_bar_ethernet">ethernet</string> |
| <string translatable="false" name="status_bar_microphone">microphone</string> |
| <string translatable="false" name="status_bar_camera">camera</string> |
| <string translatable="false" name="status_bar_airplane">airplane</string> |
| <string translatable="false" name="status_bar_no_calling">no_calling</string> |
| <string translatable="false" name="status_bar_call_strength">call_strength</string> |
| <string translatable="false" name="status_bar_sensors_off">sensors_off</string> |
| <string translatable="false" name="status_bar_screen_record">screen_record</string> |
| |
| <!-- Flag indicating whether the surface flinger has limited |
| alpha compositing functionality in hardware. If set, the window |
| manager will disable alpha trasformation in animations where not |
| strictly needed. --> |
| <bool name="config_sf_limitedAlpha">false</bool> |
| |
| <!-- Default value used to block data calls if ims is not |
| connected. If you use the ims apn DCT will block |
| any other apn from connecting until ims apn is connected--> |
| <bool name="ImsConnectedDefaultValue">false</bool> |
| |
| <!-- Flag indicating whether the surface flinger is inefficient |
| at performing a blur. Used by parts of the UI to turn off |
| the blur effect where it isn't worth the performance hit. |
| As of Honeycomb, blurring is not supported anymore. --> |
| <bool name="config_sf_slowBlur">true</bool> |
| |
| <!-- Flag indicating that the media framework should support playing of sounds on volume |
| key usage. This adds noticeable additional overhead to volume key processing, so |
| is disableable for products for which it is irrelevant. --> |
| <bool name="config_useVolumeKeySounds">true</bool> |
| |
| <!-- The attenuation in dB applied to the sound effects played |
| through AudioManager.playSoundEffect() when no volume is specified. --> |
| <integer name="config_soundEffectVolumeDb">-6</integer> |
| |
| <!-- The attenuation in dB applied to the lock/unlock sounds. --> |
| <integer name="config_lockSoundVolumeDb">-6</integer> |
| |
| <!-- Flag indicating whether the AUDIO_BECOMING_NOISY notification should |
| be sent during a change to the audio output device. --> |
| <bool name="config_sendAudioBecomingNoisy">true</bool> |
| |
| <!-- Flag to disable all transition animations --> |
| <bool name="config_disableTransitionAnimation">false</bool> |
| |
| <!-- The duration (in milliseconds) of a short animation. --> |
| <integer name="config_shortAnimTime">200</integer> |
| |
| <!-- The duration (in milliseconds) of a medium-length animation. --> |
| <integer name="config_mediumAnimTime">400</integer> |
| |
| <!-- The duration (in milliseconds) of a long animation. --> |
| <integer name="config_longAnimTime">500</integer> |
| |
| <!-- The duration (in milliseconds) of the activity open/close and fragment open/close animations. --> |
| <integer name="config_activityShortDur">150</integer> |
| <integer name="config_activityDefaultDur">220</integer> |
| |
| <!-- Fade out time for screen rotation --> |
| <integer name="config_screen_rotation_fade_out">116</integer> |
| |
| <!-- Fade in time for screen rotation --> |
| <integer name="config_screen_rotation_fade_in">200</integer> |
| |
| <!-- Fade in delay time for screen rotation --> |
| <integer name="config_screen_rotation_fade_in_delay">83</integer> |
| |
| <!-- Total time for 90 degree screen rotation animations --> |
| <integer name="config_screen_rotation_total_90">283</integer> |
| |
| <!-- Total time for 180 degree screen rotation animation --> |
| <integer name="config_screen_rotation_total_180">383</integer> |
| |
| <!-- Total time for the rotation background color transition --> |
| <integer name="config_screen_rotation_color_transition">200</integer> |
| |
| <!-- The duration (in milliseconds) of the tooltip show/hide animations. --> |
| <integer name="config_tooltipAnimTime">150</integer> |
| |
| <!-- Duration for the dim animation behind a dialog. This may be either |
| a percentage, which is relative to the duration of the enter/open |
| animation of the window being shown that is dimming behind, or it may |
| be an integer for a constant duration. --> |
| <fraction name="config_dimBehindFadeDuration">100%</fraction> |
| |
| <!-- The maximum width we would prefer dialogs to be. 0 if there is no |
| maximum (let them grow as large as the screen). Actual values are |
| specified for -large and -xlarge configurations. --> |
| <dimen name="config_prefDialogWidth">320dp</dimen> |
| |
| <!-- Enables or disables fading edges when marquee is enabled in TextView. |
| Off by default, since the framebuffer readback used to implement the |
| fading edges is prohibitively expensive on most GPUs. --> |
| <bool name="config_ui_enableFadingMarquee">false</bool> |
| |
| <!-- Enables or disables haptic effect when the text insertion/selection handle is moved |
| manually by the user. Off by default, since the expected haptic feedback may not be |
| available on some devices. --> |
| <bool name="config_enableHapticTextHandle">false</bool> |
| |
| <!-- Whether dialogs should close automatically when the user touches outside |
| of them. This should not normally be modified. --> |
| <bool name="config_closeDialogWhenTouchOutside">true</bool> |
| |
| <!-- Device configuration indicating whether we should avoid using accelerated graphics |
| in certain places to reduce RAM footprint. This is ignored if ro.config.low_ram |
| is true (in that case this is assumed true as well). It can allow you to tune down |
| your device's memory use without going to the point of causing applications to turn |
| off features. --> |
| <bool name="config_avoidGfxAccel">false</bool> |
| |
| <!-- Device configuration setting the minfree tunable in the lowmemorykiller in the kernel. |
| A high value will cause the lowmemorykiller to fire earlier, keeping more memory |
| in the file cache and preventing I/O thrashing, but allowing fewer processes to |
| stay in memory. A low value will keep more processes in memory but may cause |
| thrashing if set too low. Overrides the default value chosen by ActivityManager |
| based on screen size and total memory for the largest lowmemorykiller bucket, and |
| scaled proportionally to the smaller buckets. -1 keeps the default. --> |
| <integer name="config_lowMemoryKillerMinFreeKbytesAbsolute">-1</integer> |
| |
| <!-- Device configuration adjusting the minfree tunable in the lowmemorykiller in the |
| kernel. A high value will cause the lowmemorykiller to fire earlier, keeping more |
| memory in the file cache and preventing I/O thrashing, but allowing fewer processes |
| to stay in memory. A low value will keep more processes in memory but may cause |
| thrashing if set too low. Directly added to the default value chosen by |
| ActivityManager based on screen size and total memory for the largest lowmemorykiller |
| bucket, and scaled proportionally to the smaller buckets. 0 keeps the default. --> |
| <integer name="config_lowMemoryKillerMinFreeKbytesAdjust">0</integer> |
| |
| <!-- Device configuration setting the /proc/sys/vm/extra_free_kbytes tunable in the kernel |
| (if it exists). A high value will increase the amount of memory that the kernel |
| tries to keep free, reducing allocation time and causing the lowmemorykiller to kill |
| earlier. A low value allows more memory to be used by processes but may cause more |
| allocations to block waiting on disk I/O or lowmemorykiller. Overrides the default |
| value chosen by ActivityManager based on screen size. 0 prevents keeping any extra |
| memory over what the kernel keeps by default. -1 keeps the default. --> |
| <integer name="config_extraFreeKbytesAbsolute">-1</integer> |
| |
| <!-- Device configuration adjusting the /proc/sys/vm/extra_free_kbytes tunable in the kernel |
| (if it exists). 0 uses the default value chosen by ActivityManager. A positive value |
| will increase the amount of memory that the kernel tries to keep free, reducing |
| allocation time and causing the lowmemorykiller to kill earlier. A negative value |
| allows more memory to be used by processes but may cause more allocations to block |
| waiting on disk I/O or lowmemorykiller. Directly added to the default value chosen by |
| ActivityManager based on screen size. --> |
| <integer name="config_extraFreeKbytesAdjust">0</integer> |
| |
| <!-- Set this to true to enable the platform's auto-power-save modes like doze and |
| app standby. These are not enabled by default because they require a standard |
| cloud-to-device messaging service for apps to interact correctly with the modes |
| (such as to be able to deliver an instant message to the device even when it is |
| dozing). This should be enabled if you have such services and expect apps to |
| correctly use them when installed on your device. Otherwise, keep this disabled |
| so that applications can still use their own mechanisms. --> |
| <bool name="config_enableAutoPowerModes">false</bool> |
| |
| <!-- Whether (if true) this is a kind of device that can be moved around (eg. phone/laptop), |
| or (if false) something for which movement is either not measurable or should not count |
| toward power states (eg. tv/soundbar). --> |
| <bool name="config_autoPowerModeUseMotionSensor">true</bool> |
| |
| <!-- The threshold angle for any motion detection in auto-power save modes. |
| In hundreths of a degree. --> |
| <integer name="config_autoPowerModeThresholdAngle">200</integer> |
| |
| <!-- The sensor id of an "any motion" sensor used in auto-power save modes. |
| 0 indicates this sensor is not available. --> |
| <integer name="config_autoPowerModeAnyMotionSensor">0</integer> |
| |
| <!-- If an any motion sensor is not available, prefer the wrist tilt detector over the |
| SMD. --> |
| <bool name="config_autoPowerModePreferWristTilt">false</bool> |
| |
| <!-- If a location should be pre-fetched when going into device idle. --> |
| <bool name="config_autoPowerModePrefetchLocation">true</bool> |
| |
| <!-- The duration (in milliseconds) that the radio will scan for a signal |
| when there's no network connection. If the scan doesn't timeout, use zero --> |
| <integer name="config_radioScanningTimeout">0</integer> |
| |
| <!-- XXXXX NOTE THE FOLLOWING RESOURCES USE THE WRONG NAMING CONVENTION. |
| Please don't copy them, copy anything else. --> |
| |
| <!-- This string array should be overridden by the device to present a list of network |
| attributes. This is used by the connectivity manager to decide which networks can coexist |
| based on the hardware --> |
| <!-- An Array of "[Connection name],[ConnectivityManager.TYPE_xxxx], |
| [associated radio-type],[priority],[restoral-timer(ms)],[dependencyMet] --> |
| <!-- the 5th element "resore-time" indicates the number of milliseconds to delay |
| before automatically restore the default connection. Set -1 if the connection |
| does not require auto-restore. --> |
| <!-- the 6th element indicates boot-time dependency-met value. --> |
| <!-- NOTE: The telephony module is no longer reading the configuration below for available |
| APN types. The set of APN types and relevant settings are specified within the telephony |
| module and are non-configurable. Whether or not data connectivity over a cellular network |
| is available at all is controlled by the flag: config_moble_data_capable. --> |
| <string-array translatable="false" name="networkAttributes"> |
| <item>"wifi,1,1,1,-1,true"</item> |
| <item>"mobile,0,0,0,-1,true"</item> |
| <item>"mobile_mms,2,0,2,60000,true"</item> |
| <item>"mobile_supl,3,0,2,60000,true"</item> |
| <item>"mobile_dun,4,0,2,60000,true"</item> |
| <item>"mobile_hipri,5,0,3,60000,true"</item> |
| <item>"mobile_fota,10,0,2,60000,true"</item> |
| <item>"mobile_ims,11,0,2,60000,true"</item> |
| <item>"mobile_cbs,12,0,2,60000,true"</item> |
| <item>"wifi_p2p,13,1,0,-1,true"</item> |
| <item>"mobile_ia,14,0,2,-1,true"</item> |
| <item>"mobile_emergency,15,0,2,-1,true"</item> |
| </string-array> |
| |
| <!-- Array of ConnectivityManager.TYPE_xxxx constants for networks that may only |
| be controlled by systemOrSignature apps. --> |
| <integer-array translatable="false" name="config_protectedNetworks"> |
| <item>10</item> |
| <item>11</item> |
| <item>12</item> |
| <item>14</item> |
| <item>15</item> |
| </integer-array> |
| |
| <!-- This string array should be overridden by the device to present a list of radio |
| attributes. This is used by the connectivity manager to decide which networks can coexist |
| based on the hardware --> |
| <!-- An Array of "[ConnectivityManager connectionType], |
| [# simultaneous connection types]" --> |
| <string-array translatable="false" name="radioAttributes"> |
| <item>"1,1"</item> |
| <item>"0,1"</item> |
| </string-array> |
| |
| <!-- Whether/how to notify the user on network switches. See LingerMonitor.java. --> |
| <integer translatable="false" name="config_networkNotifySwitchType">0</integer> |
| |
| <!-- What types of network switches to notify. See LingerMonitor.java. --> |
| <string-array translatable="false" name="config_networkNotifySwitches"> |
| </string-array> |
| |
| <!-- Whether the device should automatically switch away from Wi-Fi networks that lose |
| Internet access. Actual device behaviour is controlled by |
| Settings.Global.NETWORK_AVOID_BAD_WIFI. This is the default value of that setting. --> |
| <integer translatable="false" name="config_networkAvoidBadWifi">1</integer> |
| |
| <!-- If the hardware supports specially marking packets that caused a wakeup of the |
| main CPU, set this value to the mark used. --> |
| <integer name="config_networkWakeupPacketMark">0</integer> |
| |
| <!-- Mask to use when checking skb mark defined in config_networkWakeupPacketMark above. --> |
| <integer name="config_networkWakeupPacketMask">0</integer> |
| |
| <!-- Whether the APF Filter in the device should filter out IEEE 802.3 Frames |
| Those frames are identified by the field Eth-type having values |
| less than 0x600 --> |
| <bool translatable="false" name="config_apfDrop802_3Frames">true</bool> |
| |
| <!-- An array of Denylisted EtherType, packets with EtherTypes within this array |
| will be dropped |
| TODO: need to put proper values, these are for testing purposes only --> |
| <integer-array translatable="false" name="config_apfEthTypeBlackList"> |
| <item>0x88A2</item> |
| <item>0x88A4</item> |
| <item>0x88B8</item> |
| <item>0x88CD</item> |
| <item>0x88E3</item> |
| </integer-array> |
| |
| <!-- Default value for ConnectivityManager.getMultipathPreference() on metered networks. Actual |
| device behaviour is controlled by Settings.Global.NETWORK_METERED_MULTIPATH_PREFERENCE. |
| This is the default value of that setting. --> |
| <integer translatable="false" name="config_networkMeteredMultipathPreference">0</integer> |
| |
| <!-- Default daily multipath budget used by ConnectivityManager.getMultipathPreference() |
| on metered networks. This default quota only used if quota could not be determined from |
| data plan or data limit/warning set by the user. The value that is actually used is |
| controlled by Settings.Global.NETWORK_DEFAULT_DAILY_MULTIPATH_QUOTA_BYTES. This is the |
| default value of that setting. --> |
| <integer translatable="false" name="config_networkDefaultDailyMultipathQuotaBytes">2500000</integer> |
| |
| <!-- Default supported concurrent socket keepalive slots per transport type, used by |
| ConnectivityManager.createSocketKeepalive() for calculating the number of keepalive |
| offload slots that should be reserved for privileged access. This string array should be |
| overridden by the device to present the capability of creating socket keepalives. --> |
| <!-- An Array of "[NetworkCapabilities.TRANSPORT_*],[supported keepalives] --> |
| <string-array translatable="false" name="config_networkSupportedKeepaliveCount"> |
| <item>0,1</item> |
| <item>1,3</item> |
| </string-array> |
| |
| <!-- Reserved privileged keepalive slots per transport. --> |
| <integer translatable="false" name="config_reservedPrivilegedKeepaliveSlots">2</integer> |
| |
| <!-- Allowed unprivileged keepalive slots per uid. --> |
| <integer translatable="false" name="config_allowedUnprivilegedKeepalivePerUid">2</integer> |
| |
| <!-- This setting is deprecated, please use |
| com.android.networkstack.tethering.R.array.config_tether_usb_regexs instead. --> |
| <string-array translatable="false" name="config_tether_usb_regexs"> |
| </string-array> |
| |
| <!-- This setting is deprecated, please use |
| com.android.networkstack.tethering.R.array.config_tether_wifi_regexs instead. --> |
| <string-array translatable="false" name="config_tether_wifi_regexs"> |
| </string-array> |
| |
| <!-- This setting is deprecated, please use |
| com.android.networkstack.tethering.R.array.config_tether_bluetooth_regexs instead. --> |
| <string-array translatable="false" name="config_tether_bluetooth_regexs"> |
| </string-array> |
| |
| <!-- This setting is deprecated, please use |
| com.android.networkstack.tethering.R.array.config_dhcp_range instead. --> |
| <string-array translatable="false" name="config_tether_dhcp_range"> |
| </string-array> |
| |
| <!-- Regex of wired ethernet ifaces --> |
| <string translatable="false" name="config_ethernet_iface_regex">eth\\d</string> |
| |
| <!-- Configuration of Ethernet interfaces in the following format: |
| <interface name|mac address>;[Network Capabilities];[IP config];[Override Transport] |
| Where |
| [Network Capabilities] Optional. A comma seprated list of network capabilities. |
| Values must be from NetworkCapabilities#NET_CAPABILITY_* constants. |
| The NOT_ROAMING, NOT_CONGESTED and NOT_SUSPENDED capabilities are always |
| added automatically because this configuration provides no way to update |
| them dynamically. |
| [IP config] Optional. If empty or not specified - DHCP will be used, otherwise |
| use the following format to specify static IP configuration: |
| ip=<ip-address/mask> gateway=<ip-address> dns=<comma-sep-ip-addresses> |
| domains=<comma-sep-domains> |
| [Override Transport] Optional. An override network transport type to allow |
| the propagation of an interface type on the other end of a local Ethernet |
| interface. Value must be from NetworkCapabilities#TRANSPORT_* constants. If |
| left out, this will default to TRANSPORT_ETHERNET. |
| --> |
| <string-array translatable="false" name="config_ethernet_interfaces"> |
| <!-- |
| <item>eth1;12,13,14,15;ip=192.168.0.10/24 gateway=192.168.0.1 dns=4.4.4.4,8.8.8.8</item> |
| <item>eth2;;ip=192.168.0.11/24</item> |
| <item>eth3;12,13,14,15;ip=192.168.0.12/24;1</item> |
| --> |
| </string-array> |
| |
| <!-- Whether the internal vehicle network should remain active even when no |
| apps requested it. --> |
| <bool name="config_vehicleInternalNetworkAlwaysRequested">false</bool> |
| |
| <!-- This setting is deprecated, please use |
| com.android.networkstack.tethering.R.array.config_mobile_hotspot_provision_app instead. --> |
| <string-array translatable="false" name="config_mobile_hotspot_provision_app"> |
| <!-- |
| <item>com.example.provisioning</item> |
| <item>com.example.provisioning.Activity</item> |
| --> |
| </string-array> |
| |
| <!-- This setting is deprecated, please use |
| com.android.networkstack.tethering.R.string.config_mobile_hotspot_provision_app_no_ui |
| instead. --> |
| <string translatable="false" name="config_mobile_hotspot_provision_app_no_ui"></string> |
| |
| <!-- This setting is deprecated, please use |
| com.android.networkstack.tethering.R.string.config_mobile_hotspot_provision_response |
| instead. --> |
| <string translatable="false" name="config_mobile_hotspot_provision_response"></string> |
| |
| <!-- This setting is deprecated, please use |
| com.android.networkstack.tethering.R.integer.config_mobile_hotspot_provision_check_period |
| instead. --> |
| <integer translatable="false" name="config_mobile_hotspot_provision_check_period">24</integer> |
| |
| <!-- This setting is deprecated, please use |
| com.android.networkstack.tethering.R.string.config_wifi_tether_enable instead. --> |
| <string translatable="false" name="config_wifi_tether_enable">com.android.settings/.wifi.tether.TetherService</string> |
| |
| <!-- This setting is deprecated, please use |
| com.android.networkstack.tethering.R.array.config_tether_upstream_types. --> |
| <integer-array translatable="false" name="config_tether_upstream_types"> |
| <item>1</item> |
| <item>7</item> |
| <item>0</item> |
| </integer-array> |
| |
| <!-- If the DUN connection for this CDMA device supports more than just DUN --> |
| <!-- traffic you should list them here. --> |
| <!-- If this device is not CDMA this is ignored. If this list is empty on --> |
| <!-- a DUN-requiring CDMA device, the DUN APN will just support just DUN. --> |
| <string-array translatable="false" name="config_cdma_dun_supported_types"> |
| </string-array> |
| |
| <!-- Flag indicating whether we should enable the automatic brightness. |
| Software implementation will be used if config_hardware_auto_brightness_available is not set --> |
| <bool name="config_automatic_brightness_available">false</bool> |
| |
| <!-- Flag indicating whether we should enable the adaptive sleep.--> |
| <bool name="config_adaptive_sleep_available">false</bool> |
| |
| <!-- Flag indicating whether we should enable smart battery. --> |
| <bool name="config_smart_battery_available">false</bool> |
| |
| <!-- Flag indicating whether we should enable camera-based autorotate --> |
| <bool name="config_camera_autorotate">false</bool> |
| |
| <!-- Fast brightness animation ramp rate in brightness units per second--> |
| <integer translatable="false" name="config_brightness_ramp_rate_fast">180</integer> |
| |
| <!-- Slow brightness animation ramp rate in brightness units per second--> |
| <integer translatable="false" name="config_brightness_ramp_rate_slow">60</integer> |
| |
| <!-- Don't name config resources like this. It should look like config_annoyDianne --> |
| <bool name="config_annoy_dianne">true</bool> |
| |
| <!-- XXXXXX END OF RESOURCES USING WRONG NAMING CONVENTION --> |
| |
| <!-- If this is true, notification effects will be played by the notification server. |
| When false, car notification effects will be handled elsewhere. --> |
| <bool name="config_enableServerNotificationEffectsForAutomotive">false</bool> |
| |
| <!-- If this is true, the screen will come on when you unplug usb/power/whatever. --> |
| <bool name="config_unplugTurnsOnScreen">false</bool> |
| |
| <!-- If this is true, the message that USB is only being used for charging will be shown. --> |
| <bool name="config_usbChargingMessage">true</bool> |
| |
| <!-- Set this true only if the device has separate attention and notification lights. --> |
| <bool name="config_useAttentionLight">false</bool> |
| |
| <!-- If this is true, the screen will fade off. --> |
| <bool name="config_animateScreenLights">false</bool> |
| |
| <!-- If this is true, key chords can be used to take a screenshot on the device. --> |
| <bool name="config_enableScreenshotChord">true</bool> |
| |
| <!-- If this is true, allow wake from theater mode when plugged in or unplugged. --> |
| <bool name="config_allowTheaterModeWakeFromUnplug">false</bool> |
| <!-- If this is true, allow wake from theater mode from gesture. --> |
| <bool name="config_allowTheaterModeWakeFromGesture">false</bool> |
| <!-- If this is true, allow wake from theater mode from camera lens cover is switched. --> |
| <bool name="config_allowTheaterModeWakeFromCameraLens">false</bool> |
| <!-- If this is true, allow wake from theater mode from power key press. --> |
| <bool name="config_allowTheaterModeWakeFromPowerKey">true</bool> |
| <!-- If this is true, allow wake from theater mode from regular key press. Setting this value to |
| true implies config_allowTheaterModeWakeFromPowerKey is also true--> |
| <bool name="config_allowTheaterModeWakeFromKey">false</bool> |
| <!-- If this is true, allow wake from theater mode from motion. --> |
| <bool name="config_allowTheaterModeWakeFromMotion">false</bool> |
| <!-- If this is true, allow wake from theater mode from motion. --> |
| <bool name="config_allowTheaterModeWakeFromMotionWhenNotDreaming">false</bool> |
| <!-- If this is true, allow wake from theater mode from lid switch. --> |
| <bool name="config_allowTheaterModeWakeFromLidSwitch">false</bool> |
| <!-- If this is true, allow wake from theater mode when docked. --> |
| <bool name="config_allowTheaterModeWakeFromDock">false</bool> |
| <!-- If this is true, allow wake from theater mode from window layout flag. --> |
| <bool name="config_allowTheaterModeWakeFromWindowLayout">false</bool> |
| <!-- If this is true, go to sleep when theater mode is enabled from button press --> |
| <bool name="config_goToSleepOnButtonPressTheaterMode">true</bool> |
| <!-- If this is true, long press on power button will be available from the non-interactive state --> |
| <bool name="config_supportLongPressPowerWhenNonInteractive">false</bool> |
| |
| <!-- Auto-rotation behavior --> |
| |
| <!-- If true, enables auto-rotation features using the accelerometer. |
| Otherwise, auto-rotation is disabled. Applications may still request |
| to use specific orientations but the sensor is ignored and sensor-based |
| orientations are not available. Furthermore, all auto-rotation related |
| settings are omitted from the system UI. In certain situations we may |
| still use the accelerometer to determine the orientation, such as when |
| docked if the dock is configured to enable the accelerometer. --> |
| <bool name="config_supportAutoRotation">true</bool> |
| |
| <!-- If true, the screen can be rotated via the accelerometer in all 4 |
| rotations as the default behavior. --> |
| <bool name="config_allowAllRotations">false</bool> |
| |
| <!-- If true, the direction rotation is applied to get to an application's requested |
| orientation is reversed. Normally, the model is that landscape is |
| clockwise from portrait; thus on a portrait device an app requesting |
| landscape will cause a clockwise rotation, and on a landscape device an |
| app requesting portrait will cause a counter-clockwise rotation. Setting |
| true here reverses that logic. --> |
| <bool name="config_reverseDefaultRotation">false</bool> |
| |
| <!-- Sets the minimum and maximum tilt tolerance for each possible rotation. |
| This array consists of 4 pairs of values which specify the minimum and maximum |
| tilt angle at which the device will transition into each rotation. |
| |
| The tilt angle represents the direction in which the plane of the screen is facing; |
| it is also known as the angle of elevation. |
| |
| -90 degree tilt means that the screen is facing straight down |
| (the device is being held overhead upside-down) |
| 0 degree tilt means that the screen is facing outwards |
| (the device is being held vertically) |
| 90 degree tilt means that the screen is facing straight up |
| (the device is resting on a flat table) |
| |
| The default tolerances are set conservatively such that the device is more |
| likely to remain in its natural orientation than rotate into a counterclockwise, |
| clockwise, or reversed posture (with an especially strong bias against the latter) |
| to prevent accidental rotation while carrying the device in hand. |
| |
| These thresholds may need to be tuned when the device is intended to be |
| mounted into a dock with a particularly shallow profile wherein rotation |
| would ordinarily have been suppressed. |
| |
| It is helpful to consider the desired behavior both when the device is being |
| held at a positive tilt (typical case) vs. a negative tilt (reading overhead in |
| bed) since they are quite different. In the overhead case, we typically want |
| the device to more strongly prefer to retain its current configuration (in absence |
| of a clear indication that a rotation is desired) since the user's head and neck may |
| be held at an unusual angle. |
| --> |
| <integer-array name="config_autoRotationTiltTolerance"> |
| <!-- rotation: 0 (natural) --> <item>-25</item> <item>70</item> |
| <!-- rotation: 90 (rotate CCW) --> <item>-25</item> <item>65</item> |
| <!-- rotation: 180 (reverse) --> <item>-25</item> <item>60</item> |
| <!-- rotation: 270 (rotate CW) --> <item>-25</item> <item>65</item> |
| </integer-array> |
| |
| <!-- Lid switch behavior --> |
| |
| <!-- The number of degrees to rotate the display when the keyboard is open. |
| A value of -1 means no change in orientation by default. --> |
| <integer name="config_lidOpenRotation">-1</integer> |
| |
| <!-- Indicate whether the lid state impacts the accessibility of |
| the physical keyboard. 0 means it doesn't, 1 means it is accessible |
| when the lid is open, 2 means it is accessible when the lid is |
| closed. The default is 0. --> |
| <integer name="config_lidKeyboardAccessibility">0</integer> |
| |
| <!-- Indicate whether the lid state impacts the accessibility of |
| the navigation buttons. 0 means it doesn't, 1 means it is accessible |
| when the lid is open, 2 means it is accessible when the lid is |
| closed. The default is 0. --> |
| <integer name="config_lidNavigationAccessibility">0</integer> |
| |
| <!-- Indicate whether closing the lid causes the lockscreen to appear. |
| The default is false. --> |
| <bool name="config_lidControlsScreenLock">false</bool> |
| |
| <!-- Indicate whether closing the lid causes the device to go to sleep and opening |
| it causes the device to wake up. |
| The default is false. --> |
| <bool name="config_lidControlsSleep">false</bool> |
| |
| <!-- The device states (supplied by DeviceStateManager) that should be treated as folded by the |
| display fold controller. Default is empty. --> |
| <integer-array name="config_foldedDeviceStates"> |
| <!-- Example: |
| <item>0</item> |
| <item>1</item> |
| <item>2</item> |
| --> |
| </integer-array> |
| |
| <!-- When a device enters any of these states, it should be woken up. States are defined in |
| device_state_configuration.xml. --> |
| <integer-array name="config_deviceStatesOnWhichToWakeUp"> |
| <!-- Example: |
| <item>0</item> |
| <item>1</item> |
| --> |
| </integer-array> |
| |
| <!-- When a device enters any of these states, it should go to sleep. States are defined in |
| device_state_configuration.xml. --> |
| <integer-array name="config_deviceStatesOnWhichToSleep"> |
| <!-- Example: |
| <item>0</item> |
| <item>1</item> |
| --> |
| </integer-array> |
| |
| <!-- Indicate the display area rect for foldable devices in folded state. --> |
| <string name="config_foldedArea"></string> |
| |
| <!-- Indicates whether to enable an animation when unfolding a device or not --> |
| <bool name="config_unfoldTransitionEnabled">false</bool> |
| |
| <!-- Indicates whether to enable hinge angle sensor when using unfold animation --> |
| <bool name="config_unfoldTransitionHingeAngle">false</bool> |
| |
| <!-- Indicates the time needed to time out the fold animation if the device stops in half folded |
| mode. --> |
| <integer name="config_unfoldTransitionHalfFoldedTimeout">600</integer> |
| |
| <!-- Indicates that the device supports having more than one internal display on at the same |
| time. Only applicable to devices with more than one internal display. If this option is |
| set to false, DisplayManager will make additional effort to ensure no more than 1 internal |
| display is powered on at the same time. --> |
| <bool name="config_supportsConcurrentInternalDisplays">true</bool> |
| |
| <!-- Map of DeviceState to rotation lock setting. Each entry must be in the format |
| "key:value", for example: "0:1". |
| The keys are device states, and the values are one of |
| Settings.Secure.DeviceStateRotationLockSetting. |
| Any device state that doesn't have a default set here will be treated as |
| DEVICE_STATE_ROTATION_LOCK_IGNORED meaning it will not have its own rotation lock setting. |
| If this map is missing, the feature is disabled and only one global rotation lock setting |
| will apply, regardless of device state. --> |
| <string-array name="config_perDeviceStateRotationLockDefaults" /> |
| |
| <!-- Dock behavior --> |
| |
| <!-- Control whether to start dream immediately upon docking even if the lockscreen is unlocked. |
| This defaults to true to be consistent with historical behavior. --> |
| <bool name="config_startDreamImmediatelyOnDock">true</bool> |
| |
| <!-- Desk dock behavior --> |
| |
| <!-- The number of degrees to rotate the display when the device is in a desk dock. |
| A value of -1 means no change in orientation by default. --> |
| <integer name="config_deskDockRotation">-1</integer> |
| |
| <!-- Control whether being in the desk dock (and powered) always |
| keeps the screen on. By default it stays on when plugged in to |
| AC. 0 will not keep it on; or together 1 to stay on when plugged |
| in to AC and 2 to stay on when plugged in to USB. (So 3 for both.) --> |
| <integer name="config_deskDockKeepsScreenOn">1</integer> |
| |
| <!-- Control whether being in the desk dock should enable accelerometer |
| based screen orientation. This defaults to true because it is |
| common for desk docks to be sold in a variety of form factors |
| with different orientations. Since we cannot always tell these docks |
| apart and the docks cannot report their true orientation on their own, |
| we rely on gravity to determine the effective orientation. --> |
| <bool name="config_deskDockEnablesAccelerometer">true</bool> |
| |
| <!-- Car dock behavior --> |
| |
| <!-- The number of degrees to rotate the display when the device is in a car dock. |
| A value of -1 means no change in orientation by default. --> |
| <integer name="config_carDockRotation">-1</integer> |
| |
| <!-- Control whether being in the car dock (and powered) always |
| keeps the screen on. By default it stays on when plugged in to |
| AC. 0 will not keep it on; or together 1 to stay on when plugged |
| in to AC and 2 to stay on when plugged in to USB. (So 3 for both.) --> |
| <integer name="config_carDockKeepsScreenOn">1</integer> |
| |
| <!-- Control whether being in the car dock should enable accelerometer based |
| screen orientation. This defaults to true because putting a device in |
| a car dock make the accelerometer more a physical input (like a lid). --> |
| |
| <bool name="config_carDockEnablesAccelerometer">true</bool> |
| |
| <!-- Control whether to launch Car dock home app when user presses home button or when |
| car dock intent is fired. |
| In mobile device, usually separate home app is expected in car mode, and this should be |
| enabled. But in environments like real car, default home app may be enough, and in that |
| case, this can be disabled (set to false). --> |
| <bool name="config_enableCarDockHomeLaunch">true</bool> |
| |
| <!-- Control whether to force apps to give up control over the display of system bars at all |
| times regardless of System Ui Flags. |
| In the Automotive case, this is helpful if there's a requirement for an UI element to be on |
| screen at all times. Setting this to true also gives System UI the ability to override the |
| visibility controls for the system through the usage of the |
| "SYSTEM_BAR_VISIBILITY_OVERRIDE" setting. |
| Ex: Only setting the config to true will force show system bars for the entire system. |
| Ex: Setting the config to true and the "SYSTEM_BAR_VISIBILITY_OVERRIDE" setting to |
| "immersive.status=apps" will force show navigation bar for all apps and force hide status |
| bar for all apps. --> |
| <bool name="config_remoteInsetsControllerControlsSystemBars">false</bool> |
| |
| <!-- HDMI behavior --> |
| |
| <!-- The number of degrees to rotate the display when the device has HDMI connected |
| but is not in a dock. A value of -1 means no change in orientation by default. |
| Use -1 except on older devices whose Hardware Composer HAL does not |
| provide full support for multiple displays. --> |
| <integer name="config_undockedHdmiRotation">-1</integer> |
| |
| <!-- Control the default UI mode type to use when there is no other type override |
| happening. One of the following values (See Configuration.java): |
| 1 UI_MODE_TYPE_NORMAL |
| 4 UI_MODE_TYPE_TELEVISION |
| 5 UI_MODE_TYPE_APPLIANCE |
| 6 UI_MODE_TYPE_WATCH |
| 7 UI_MODE_TYPE_VR_HEADSET |
| Any other values will have surprising consequences. --> |
| <integer name="config_defaultUiModeType">1</integer> |
| |
| <!-- Control whether to lock UI mode to what is selected from config_defaultUiModeType. |
| Once UI mode is locked, applications cannot change it anymore. --> |
| <bool name="config_lockUiMode">false</bool> |
| |
| <!-- Control whether to lock day/night mode change from normal application. When it is |
| true, day / night mode change is only allowed to apps with MODIFY_DAY_NIGHT_MODE |
| permission. --> |
| <bool name="config_lockDayNightMode">true</bool> |
| |
| <!-- Control the default night mode to use when there is no other mode override set. |
| One of the following values (see UiModeManager.java): |
| 0 - MODE_NIGHT_AUTO |
| 1 - MODE_NIGHT_NO |
| 2 - MODE_NIGHT_YES |
| --> |
| <integer name="config_defaultNightMode">1</integer> |
| |
| <!-- Boolean indicating whether the HWC setColorTransform function can be performed efficiently |
| in hardware. --> |
| <bool name="config_setColorTransformAccelerated">false</bool> |
| |
| <!-- Boolean indicating whether the HWC setColorTransform function can be performed efficiently |
| in hardware for individual layers. --> |
| <bool name="config_setColorTransformAcceleratedPerLayer">false</bool> |
| |
| <!-- Control whether Night display is available. This should only be enabled on devices |
| that have a HWC implementation that can apply the matrix passed to setColorTransform |
| without impacting power, performance, and app compatibility (e.g. protected content). --> |
| <bool name="config_nightDisplayAvailable">@bool/config_setColorTransformAccelerated</bool> |
| |
| <!-- Default mode to control how Night display is automatically activated. |
| One of the following values (see ColorDisplayManager.java): |
| 0 - AUTO_MODE_DISABLED |
| 1 - AUTO_MODE_CUSTOM_TIME |
| 2 - AUTO_MODE_TWILIGHT |
| --> |
| <integer name="config_defaultNightDisplayAutoMode">0</integer> |
| |
| <!-- Default time when Night display is automatically activated. |
| Represented as milliseconds from midnight (e.g. 79200000 == 10pm). --> |
| <integer name="config_defaultNightDisplayCustomStartTime">79200000</integer> |
| |
| <!-- Default time when Night display is automatically deactivated. |
| Represented as milliseconds from midnight (e.g. 21600000 == 6am). --> |
| <integer name="config_defaultNightDisplayCustomEndTime">21600000</integer> |
| |
| <!-- Minimum color temperature, in Kelvin, supported by Night display. --> |
| <integer name="config_nightDisplayColorTemperatureMin">2596</integer> |
| |
| <!-- Default color temperature, in Kelvin, to tint the screen when Night display is |
| activated. --> |
| <integer name="config_nightDisplayColorTemperatureDefault">2850</integer> |
| |
| <!-- Maximum color temperature, in Kelvin, supported by Night display. --> |
| <integer name="config_nightDisplayColorTemperatureMax">4082</integer> |
| |
| <string-array name="config_nightDisplayColorTemperatureCoefficientsNative"> |
| <!-- R a-coefficient --> <item>0.0</item> |
| <!-- R b-coefficient --> <item>0.0</item> |
| <!-- R y-intercept --> <item>1.0</item> |
| <!-- G a-coefficient --> <item>-0.00000000962353339</item> |
| <!-- G b-coefficient --> <item>0.000153045476</item> |
| <!-- G y-intercept --> <item>0.390782778</item> |
| <!-- B a-coefficient --> <item>-0.0000000189359041</item> |
| <!-- B b-coefficient --> <item>0.000302412211</item> |
| <!-- B y-intercept --> <item>-0.198650895</item> |
| </string-array> |
| |
| <string-array name="config_nightDisplayColorTemperatureCoefficients"> |
| <!-- R a-coefficient --> <item>0.0</item> |
| <!-- R b-coefficient --> <item>0.0</item> |
| <!-- R y-intercept --> <item>1.0</item> |
| <!-- G a-coefficient --> <item>-0.00000000962353339</item> |
| <!-- G b-coefficient --> <item>0.000153045476</item> |
| <!-- G y-intercept --> <item>0.390782778</item> |
| <!-- B a-coefficient --> <item>-0.0000000189359041</item> |
| <!-- B b-coefficient --> <item>0.000302412211</item> |
| <!-- B y-intercept --> <item>-0.198650895</item> |
| </string-array> |
| |
| <!-- Control whether bright color reduction is available. This should only be enabled on devices |
| that have a HWC implementation that can apply the matrix passed to setColorTransform |
| without impacting power, performance, and app compatibility (e.g. protected content). --> |
| <bool name="config_reduceBrightColorsAvailable">@bool/config_setColorTransformAccelerated</bool> |
| |
| <string-array name="config_reduceBrightColorsCoefficientsNonlinear"> |
| <!-- a-coefficient --> <item>-0.4429953456</item> |
| <!-- b-coefficient --> <item>-0.2434077725</item> |
| <!-- y-intercept --> <item>0.9809063061</item> |
| </string-array> |
| |
| <string-array name="config_reduceBrightColorsCoefficients"> |
| <!-- a-coefficient --> <item>-0.000000000000001</item> |
| <!-- b-coefficient --> <item>-0.955555555555554</item> |
| <!-- y-intercept --> <item>1.000000000000000</item> |
| </string-array> |
| |
| <!-- Default strength, in percentage, of bright color reduction when activated. --> |
| <integer name="config_reduceBrightColorsStrengthDefault">50</integer> |
| |
| <!-- Minimum strength, in percentage, supported by bright color reduction. --> |
| <integer name="config_reduceBrightColorsStrengthMin">25</integer> |
| |
| <!-- Maximum strength, in percentage, supported by bright color reduction. --> |
| <integer name="config_reduceBrightColorsStrengthMax">90</integer> |
| |
| <!-- Boolean indicating whether display white balance is supported. --> |
| <bool name="config_displayWhiteBalanceAvailable">false</bool> |
| |
| <!-- Boolean indicating whether display white balance should be enabled by default. --> |
| <bool name="config_displayWhiteBalanceEnabledDefault">false</bool> |
| |
| <!-- Minimum color temperature, in Kelvin, supported by display white balance. --> |
| <integer name="config_displayWhiteBalanceColorTemperatureMin">4000</integer> |
| |
| <!-- Maximum color temperature, in Kelvin, supported by display white balance. --> |
| <integer name="config_displayWhiteBalanceColorTemperatureMax">8000</integer> |
| |
| <!-- Default color temperature, in Kelvin, used by display white balance. --> |
| <integer name="config_displayWhiteBalanceColorTemperatureDefault">6500</integer> |
| |
| <!-- The display primaries, in CIE1931 XYZ color space, for display |
| white balance to use in its calculations. The array must include a total of 12 float |
| values: 3 values per color (X, Y, Z) and 4 colors (R, G, B, W) --> |
| <string-array name="config_displayWhiteBalanceDisplayPrimaries"> |
| <!-- Red X --> <item>0.412315</item> |
| <!-- Red Y --> <item>0.212600</item> |
| <!-- Red Z --> <item>0.019327</item> |
| <!-- Green X --> <item>0.357600</item> |
| <!-- Green Y --> <item>0.715200</item> |
| <!-- Green Z --> <item>0.119200</item> |
| <!-- Blue X --> <item>0.180500</item> |
| <!-- Blue Y --> <item>0.072200</item> |
| <!-- Blue Z --> <item>0.950633</item> |
| <!-- White X --> <item>0.950456</item> |
| <!-- White Y --> <item>1.000000</item> |
| <!-- White Z --> <item>1.089058</item> |
| </string-array> |
| |
| <!-- The nominal white coordinates, in CIE1931 XYZ color space, for Display White Balance to |
| use in its calculations. AWB will adapt this white point to the target ambient white |
| point. The array must include a total of 3 float values (X, Y, Z) --> |
| <string-array name="config_displayWhiteBalanceDisplayNominalWhite"> |
| <!-- Nominal White X --> <item>0.950456</item> |
| <!-- Nominal White Y --> <item>1.000000</item> |
| <!-- Nominal White Z --> <item>1.089058</item> |
| </string-array> |
| |
| |
| <!-- Indicate available ColorDisplayManager.COLOR_MODE_xxx. --> |
| <integer-array name="config_availableColorModes"> |
| <!-- Example: |
| <item>0</item> |
| <item>1</item> |
| <item>2</item> |
| --> |
| </integer-array> |
| |
| <!-- Mapping for default ColorDisplayManager.COLOR_MODE_xxx to other color modes, if |
| if applicable. By default, all map to the same value. --> |
| <integer-array name="config_mappedColorModes"> |
| <item>0</item> <!-- COLOR_MODE_NATURAL --> |
| <item>1</item> <!-- COLOR_MODE_BOOSTED --> |
| <item>2</item> <!-- COLOR_MODE_SATURATED --> |
| <item>3</item> <!-- COLOR_MODE_AUTOMATIC --> |
| </integer-array> |
| |
| <!-- Hint to decide whether restored vendor color modes are compatible with the new device. If |
| unset or a match is not made, only the standard color modes will be restored. If set, it |
| should be a unique identifier for the kinds of vendor modes this device supports, such as a |
| manufacturer name. --> |
| <string name="config_vendorColorModesRestoreHint" translatable="false"></string> |
| |
| <!-- Color mode to use when accessibility transforms are enabled. This color mode must be |
| supported by the device, but not necessarily appear in config_availableColorModes. The |
| regularly selected color mode will be used if this value is negative. --> |
| <integer name="config_accessibilityColorMode">-1</integer> |
| |
| <!-- The following two arrays specify which color space to use for display composition when a |
| certain color mode is active. |
| Composition color spaces are defined in android.view.Display.COLOR_MODE_xxx, and color |
| modes are defined in ColorDisplayManager.COLOR_MODE_xxx and |
| ColorDisplayManager.VENDOR_COLOR_MODE_xxx. |
| The color space COLOR_MODE_DEFAULT (0) lets the system select the most appropriate |
| composition color space for currently displayed content. Other values (e.g., |
| COLOR_MODE_SRGB) override system selection; these other color spaces must be supported by |
| the device for for display composition. |
| If a color mode does not have a corresponding color space specified in this array, the |
| currently set composition color space will not be modified.--> |
| <integer-array name="config_displayCompositionColorModes"> |
| </integer-array> |
| <integer-array name="config_displayCompositionColorSpaces"> |
| </integer-array> |
| |
| <!-- Indicate whether to allow the device to suspend when the screen is off |
| due to the proximity sensor. This resource should only be set to true |
| if the sensor HAL correctly handles the proximity sensor as a wake-up source. |
| Otherwise, the device may fail to wake out of suspend reliably. |
| The default is false. --> |
| <bool name="config_suspendWhenScreenOffDueToProximity">false</bool> |
| |
| <!-- The time in milliseconds of prolonged user inactivity after which device goes to sleep, |
| even if wakelocks are held. --> |
| <integer name="config_attentiveTimeout">-1</integer> |
| |
| <!-- How long to show a warning message to user before the device goes to sleep after prolonged |
| user inactivity. --> |
| <integer name="config_attentiveWarningDuration">30000</integer> |
| |
| <!-- Control the behavior when the user long presses the power button. |
| 0 - Nothing |
| 1 - Global actions menu |
| 2 - Power off (with confirmation) |
| 3 - Power off (without confirmation) |
| 4 - Go to voice assist |
| 5 - Go to assistant (Settings.Secure.ASSISTANT) |
| --> |
| <integer name="config_longPressOnPowerBehavior">5</integer> |
| |
| <!-- The time in milliseconds after which a press on power button is considered "long". --> |
| <integer name="config_longPressOnPowerDurationMs">500</integer> |
| |
| <!-- The possible UI options to be surfaced for configuring long press power on duration |
| action. Value set in config_longPressOnPowerDurationMs should be one of the available |
| options to allow users to restore default. --> |
| <integer-array name="config_longPressOnPowerDurationSettings"> |
| <item>250</item> |
| <item>350</item> |
| <item>500</item> |
| <item>650</item> |
| <item>750</item> |
| </integer-array> |
| |
| <!-- Whether the setting to change long press on power behaviour from default to assistant (5) |
| is available in Settings. |
| --> |
| <bool name="config_longPressOnPowerForAssistantSettingAvailable">true</bool> |
| |
| <!-- Control the behavior when the user long presses the power button for a long time. |
| 0 - Nothing |
| 1 - Global actions menu |
| --> |
| <integer name="config_veryLongPressOnPowerBehavior">0</integer> |
| |
| <!-- Control the behavior when the user presses the power and volume up buttons together. |
| 0 - Nothing |
| 1 - Mute toggle |
| 2 - Global actions menu |
| --> |
| <integer name="config_keyChordPowerVolumeUp">2</integer> |
| |
| <!-- Control the behavior when the user long presses the back button. Non-zero values are only |
| valid for watches as part of CDD/CTS. |
| 0 - Nothing |
| 1 - Go to voice assist |
| --> |
| <integer name="config_longPressOnBackBehavior">0</integer> |
| |
| <!-- Allows activities to be launched on a long press on power during device setup. --> |
| <bool name="config_allowStartActivityForLongPressOnPowerInSetup">false</bool> |
| |
| <!-- Control the behavior when the user short presses the power button. |
| 0 - Nothing |
| 1 - Go to sleep (doze) |
| 2 - Really go to sleep (don't doze) |
| 3 - Really go to sleep and go home (don't doze) |
| 4 - Go to home |
| 5 - Dismiss IME if shown. Otherwise go to home |
| --> |
| <integer name="config_shortPressOnPowerBehavior">1</integer> |
| |
| <!-- Control the behavior when the user double presses the power button. |
| 0 - Nothing |
| 1 - Toggle theater mode setting |
| 2 - Brightness boost |
| 3 - Launch target activity defined by config_doublePressOnPowerTargetActivity |
| if available |
| --> |
| <integer name="config_doublePressOnPowerBehavior">0</integer> |
| |
| <!-- Activity name for the default target activity to be launched. Note that |
| config_doublePressOnPowerBehavior must be set to 3 for this to work. [DO NOT TRANSLATE] |
| --> |
| <string name="config_doublePressOnPowerTargetActivity" translatable="false"></string> |
| |
| <!-- Control the behavior when the user triple presses the power button. |
| 0 - Nothing |
| 1 - Toggle theater mode setting |
| 2 - Brightness boost |
| --> |
| <integer name="config_triplePressOnPowerBehavior">0</integer> |
| |
| <!-- Control the behavior when the user presses the sleep button. |
| 0 - Go to sleep (doze) |
| 1 - Go to sleep (doze) and go home |
| --> |
| <integer name="config_shortPressOnSleepBehavior">0</integer> |
| |
| <!-- Control the behavior when the user long presses the stem primary button. |
| Stem primary button is only used on watch form factor. If a device is not |
| a watch, setting this config is no-op. |
| 0 - Nothing |
| 1 - Launch voice assistant |
| --> |
| <integer name="config_longPressOnStemPrimaryBehavior">0</integer> |
| |
| <!-- Control the behavior when the user double presses the stem primary button. |
| Stem primary button is only used on watch form factor. If a device is not |
| a watch, setting this config is no-op. |
| 0 - Nothing |
| 1 - Switch to the recent app |
| --> |
| <integer name="config_doublePressOnStemPrimaryBehavior">0</integer> |
| |
| <!-- Control the behavior when the user triple presses the stem primary button. |
| Stem primary button is only used on watch form factor. If a device is not |
| a watch, setting this config is no-op. |
| 0 - Nothing |
| 1 - Toggle accessibility |
| --> |
| <integer name="config_triplePressOnStemPrimaryBehavior">0</integer> |
| |
| <!-- Control the behavior when the user short presses the stem primary button. |
| Stem primary button is only used on watch form factor. If a device is not |
| a watch, setting this config is no-op. |
| 0 - Nothing |
| 1 - Go to launch all apps |
| --> |
| <integer name="config_shortPressOnStemPrimaryBehavior">0</integer> |
| |
| |
| <!-- Time to wait while a button is pressed before triggering a very long press. --> |
| <integer name="config_veryLongPressTimeout">3500</integer> |
| |
| <!-- Time to wait before sending a HOME intent when waking up from power/home button. |
| (0 - do not send HOME intent on wakeup) |
| --> |
| <integer name="config_wakeUpToLastStateTimeoutMillis">0</integer> |
| |
| <!-- Package name for default keyguard appwidget [DO NOT TRANSLATE] --> |
| <string name="widget_default_package_name" translatable="false"></string> |
| |
| <!-- Class name for default keyguard appwidget [DO NOT TRANSLATE] --> |
| <string name="widget_default_class_name" translatable="false"></string> |
| |
| <!-- Indicate whether the SD card is accessible without removing the battery. --> |
| <bool name="config_batterySdCardAccessibility">false</bool> |
| |
| <!-- List of file paths for USB host busses to exclude from USB host support. |
| For example, if the first USB bus on the device is used to communicate |
| with the modem or some other restricted hardware, add "/dev/bus/usb/001/" |
| to this list. If this is empty, no parts of the host USB bus will be excluded. |
| --> |
| <string-array name="config_usbHostDenylist" translatable="false"> |
| </string-array> |
| |
| <!-- List of paths to serial ports that are available to the serial manager. |
| for example, /dev/ttyUSB0 |
| --> |
| <string-array translatable="false" name="config_serialPorts"> |
| </string-array> |
| |
| <!-- Vibrator pattern for feedback about a long screen/key press --> |
| <integer-array name="config_longPressVibePattern"> |
| <item>0</item> |
| <item>30</item> |
| </integer-array> |
| |
| <!-- Vibrator pattern for feedback about touching a virtual key --> |
| <integer-array name="config_virtualKeyVibePattern"> |
| <item>0</item> |
| <item>20</item> |
| </integer-array> |
| |
| <!-- Vibrator pattern for feedback that simulates a double click effect --> |
| <integer-array name="config_doubleClickVibePattern"> |
| <item>0</item> |
| <item>30</item> |
| <item>100</item> |
| <item>30</item> |
| </integer-array> |
| |
| <!-- Vibrator pattern for feedback when selecting an hour/minute tick of a Clock --> |
| <integer-array name="config_clockTickVibePattern"> |
| <item>0</item> |
| <item>10</item> |
| </integer-array> |
| |
| <!-- Vibrator pattern for feedback about booting with safe mode enabled --> |
| <integer-array name="config_safeModeEnabledVibePattern"> |
| <item>0</item> |
| <item>1</item> |
| <item>20</item> |
| <item>21</item> |
| <item>500</item> |
| <item>600</item> |
| </integer-array> |
| |
| <!-- The URI to associate with each ringtone effect constant, intended to be used with the |
| android.os.VibrationEffect#get(Uri, Context) API. |
| The position of the string in the string-array determines which ringtone effect is chosen. |
| For example, if the URI passed into get match the third string in the string-array, then |
| RINGTONE_3 will be the returned effect --> |
| <string-array translatable="false" name="config_ringtoneEffectUris"> |
| </string-array> |
| |
| <!-- The default intensity level for alarm vibrations. See |
| Settings.System.ALARM_VIBRATION_INTENSITY more details on the constant values and |
| meanings. --> |
| <integer name="config_defaultAlarmVibrationIntensity">2</integer> |
| <!-- The default intensity level for haptic feedback. See |
| Settings.System.HAPTIC_FEEDBACK_INTENSITY more details on the constant values and |
| meanings. --> |
| <integer name="config_defaultHapticFeedbackIntensity">2</integer> |
| <!-- The default intensity level for media vibrations. See |
| Settings.System.MEDIA_VIBRATION_INTENSITY more details on the constant values and |
| meanings. --> |
| <integer name="config_defaultMediaVibrationIntensity">2</integer> |
| <!-- The default intensity level for notification vibrations. See |
| Settings.System.NOTIFICATION_VIBRATION_INTENSITY more details on the constant values and |
| meanings. --> |
| <integer name="config_defaultNotificationVibrationIntensity">2</integer> |
| <!-- The default intensity level for ring vibrations. See |
| Settings.System.RING_VIBRATION_INTENSITY more details on the constant values and |
| meanings. --> |
| <integer name="config_defaultRingVibrationIntensity">2</integer> |
| |
| <!-- Whether to use the strict phone number matcher by default. --> |
| <bool name="config_use_strict_phone_number_comparation">false</bool> |
| |
| <!-- Whether to use the strict phone number matcher in Russia. --> |
| <bool name="config_use_strict_phone_number_comparation_for_russia">true</bool> |
| |
| <!-- Whether to use the strict phone number matcher in Kazakhstan. --> |
| <bool name="config_use_strict_phone_number_comparation_for_kazakhstan">true</bool> |
| |
| <!-- The character count of the minimum match for comparison phone numbers --> |
| <integer name="config_phonenumber_compare_min_match">7</integer> |
| |
| <!-- Display low battery warning when battery level dips to this value. |
| Also, the battery stats are flushed to disk when we hit this level. --> |
| <integer name="config_criticalBatteryWarningLevel">10</integer> |
| |
| <!-- Shutdown if the battery temperature exceeds (this value * 0.1) Celsius. --> |
| <integer name="config_shutdownBatteryTemperature">680</integer> |
| |
| <!-- Display low battery warning when battery level dips to this value --> |
| <integer name="config_lowBatteryWarningLevel">20</integer> |
| |
| <!-- The default suggested battery % at which we enable battery saver automatically. --> |
| <integer name="config_lowBatteryAutoTriggerDefaultLevel">15</integer> |
| |
| <!-- The app which will handle routine based automatic battery saver, if empty the UI for |
| routine based battery saver will be hidden --> |
| <string name="config_batterySaverScheduleProvider"></string> |
| |
| <!-- Close low battery warning when battery level reaches the lowBatteryWarningLevel |
| plus this --> |
| <integer name="config_lowBatteryCloseWarningBump">5</integer> |
| |
| <!-- Default color for notification LED. --> |
| <color name="config_defaultNotificationColor">#ffffffff</color> |
| |
| <!-- Default LED on time for notification LED in milliseconds. --> |
| <integer name="config_defaultNotificationLedOn">500</integer> |
| |
| <!-- Default LED off time for notification LED in milliseconds. --> |
| <integer name="config_defaultNotificationLedOff">2000</integer> |
| |
| <!-- Default value for led color when battery is low on charge --> |
| <integer name="config_notificationsBatteryLowARGB">0xFFFF0000</integer> |
| |
| <!-- Default value for led color when battery is medium charged --> |
| <integer name="config_notificationsBatteryMediumARGB">0xFFFFFF00</integer> |
| |
| <!-- Default value for led color when battery is fully charged --> |
| <integer name="config_notificationsBatteryFullARGB">0xFF00FF00</integer> |
| |
| <!-- Default value for LED on time when the battery is low on charge in miliseconds --> |
| <integer name="config_notificationsBatteryLedOn">125</integer> |
| |
| <!-- Is the notification LED intrusive? Used to decide if there should be a disable option --> |
| <bool name="config_intrusiveNotificationLed">false</bool> |
| |
| <!-- De we do icon badges? Used to decide if there should be a disable option--> |
| <bool name="config_notificationBadging">true</bool> |
| |
| <!-- Default value for LED off time when the battery is low on charge in miliseconds --> |
| <integer name="config_notificationsBatteryLedOff">2875</integer> |
| |
| <!-- If true, only colorized CallStyle notifications will apply custom colors --> |
| <bool name="config_callNotificationActionColorsRequireColorized">true</bool> |
| |
| <!-- Number of notifications to keep in the notification service historical archive --> |
| <integer name="config_notificationServiceArchiveSize">100</integer> |
| |
| <!-- Allow the menu hard key to be disabled in LockScreen on some devices --> |
| <bool name="config_disableMenuKeyInLockScreen">false</bool> |
| |
| <!-- Don't show lock screen before unlock screen (PIN/pattern/password) --> |
| <bool name="config_enableLockBeforeUnlockScreen">false</bool> |
| |
| <!-- Disable lockscreen rotation by default --> |
| <bool name="config_enableLockScreenRotation">false</bool> |
| |
| <!-- Is the device capable of hot swapping an UICC Card --> |
| <bool name="config_hotswapCapable">false</bool> |
| |
| <!-- Component name of the ICC hotswap prompt for restart dialog --> |
| <string name="config_iccHotswapPromptForRestartDialogComponent" translatable="false">@null</string> |
| |
| <!-- Enable puk unlockscreen by default. |
| If unlock screen is disabled, the puk should be unlocked through Emergency Dialer --> |
| <bool name="config_enable_puk_unlock_screen">true</bool> |
| |
| <!-- Enable emergency call when sim is locked or puk locked. Some countries/carriers do not |
| allow emergency calls to be placed without the IMSI, which is locked in the SIM. |
| If so, this should be set to 'false' in an overlay. --> |
| <bool name="config_enable_emergency_call_while_sim_locked">true</bool> |
| |
| <!-- Is the lock-screen disabled for new users by default --> |
| <bool name="config_disableLockscreenByDefault">false</bool> |
| |
| <!-- If true, enables verification of the lockscreen credential in the factory reset protection |
| flow. This should be true if gatekeeper / weaver credentials can still be checked after a |
| factory reset. --> |
| <bool name="config_enableCredentialFactoryResetProtection">true</bool> |
| |
| <!-- Control the behavior when the user long presses the home button. |
| 0 - Nothing |
| 1 - Launch all apps intent |
| 2 - Launch assist intent |
| 3 - Launch notification panel |
| This needs to match the constants in |
| policy/src/com/android/internal/policy/impl/PhoneWindowManager.java |
| --> |
| <integer name="config_longPressOnHomeBehavior">0</integer> |
| |
| <!-- Control the behavior when the user double-taps the home button. |
| 0 - Nothing |
| 1 - Recent apps view in SystemUI |
| 2 - Picture-in-picture menu |
| This needs to match the constants in |
| policy/src/com/android/internal/policy/impl/PhoneWindowManager.java |
| --> |
| <integer name="config_doubleTapOnHomeBehavior">0</integer> |
| |
| <!-- Note: This setting is deprecated, please use |
| config_screenBrightnessSettingMinimumFloat instead --> |
| <integer name="config_screenBrightnessSettingMinimum">10</integer> |
| |
| <!-- Note: This setting is deprecated, please use |
| config_screenBrightnessSettingMaximumFloat instead --> |
| <integer name="config_screenBrightnessSettingMaximum">255</integer> |
| |
| <!-- Note: This setting is deprecated, please use |
| config_screenBrightnessSettingDefaultFloat instead --> |
| <integer name="config_screenBrightnessSettingDefault">102</integer> |
| |
| <!-- Minimum screen brightness setting allowed by power manager. |
| -2 is invalid so setting will resort to int value specified above. |
| Set this to 0.0 to allow screen to go to minimal brightness. |
| The user is forbidden from setting the brightness below this level. --> |
| <item name="config_screenBrightnessSettingMinimumFloat" format="float" type="dimen">-2</item> |
| |
| <!-- Maximum screen brightness allowed by the power manager. |
| -2 is invalid so setting will resort to int value specified above. |
| Set this to 1.0 for maximum brightness range. |
| The user is forbidden from setting the brightness above this level. --> |
| <item name="config_screenBrightnessSettingMaximumFloat" format="float" type="dimen">-2</item> |
| |
| <!-- Default screen brightness setting set. |
| -2 is invalid so setting will resort to int value specified above. |
| Must be in the range specified by minimum and maximum. --> |
| <item name="config_screenBrightnessSettingDefaultFloat" format="float" type="dimen">-2</item> |
| |
| <!-- Note: This setting is deprecated, please use |
| config_screenBrightnessSettingForVrDefaultFloat instead --> |
| <integer name="config_screenBrightnessForVrSettingDefault">86</integer> |
| |
| <!-- Note: This setting is deprecated, please use |
| config_screenBrightnessSettingForVrMinimumFloat instead --> |
| <integer name="config_screenBrightnessForVrSettingMinimum">79</integer> |
| |
| <!-- Note: This setting is deprecated, please use |
| config_screenBrightnessSettingForVrMaximumFloat instead --> |
| <integer name="config_screenBrightnessForVrSettingMaximum">255</integer> |
| |
| <!-- Default screen brightness for VR setting as a float. |
| Equivalent to 86/255--> |
| <item name="config_screenBrightnessSettingForVrDefaultFloat" format="float" type="dimen">0.33464</item> |
| |
| <!-- Minimum screen brightness setting allowed for VR. Device panels start increasing pulse |
| width as brightness decreases below this threshold as float. |
| Equivalent to 79/255 --> |
| <item name="config_screenBrightnessSettingForVrMinimumFloat" format="float" type="dimen">0.307087</item> |
| |
| <!-- Maximum screen brightness setting allowed for VR as float. --> |
| <item name="config_screenBrightnessSettingForVrMaximumFloat" format="float" type="dimen">1.0</item> |
| |
| <!-- Screen brightness used to dim the screen while dozing in a very low power state. |
| May be less than the minimum allowed brightness setting |
| that can be set by the user. --> |
| <integer name="config_screenBrightnessDoze">1</integer> |
| <item name="config_screenBrightnessDozeFloat" format="float" type="dimen">0.0</item> |
| |
| <!-- Whether or not to skip the initial brightness ramps when the display transitions to |
| STATE_ON. Setting this to true will skip the brightness ramp to the last stored active |
| brightness value and will repeat for the following ramp if autobrightness is enabled. --> |
| <bool name="config_skipScreenOnBrightnessRamp">false</bool> |
| |
| <!-- Allow automatic adjusting of the screen brightness while dozing in low power state. --> |
| <bool name="config_allowAutoBrightnessWhileDozing">false</bool> |
| |
| <!-- Stability requirements in milliseconds for accepting a new brightness level. This is used |
| for debouncing the light sensor. Different constants are used to debounce the light sensor |
| when adapting to brighter or darker environments. This parameter controls how quickly |
| brightness changes occur in response to an observed change in light level that exceeds the |
| hysteresis threshold. --> |
| <integer name="config_autoBrightnessBrighteningLightDebounce">4000</integer> |
| <integer name="config_autoBrightnessDarkeningLightDebounce">8000</integer> |
| |
| <!-- Initial light sensor event rate in milliseconds for automatic brightness control. This is |
| used for obtaining the first light sample when the device stops dozing. |
| |
| Set this to -1 to disable this feature. --> |
| <integer name="config_autoBrightnessInitialLightSensorRate">-1</integer> |
| |
| <!-- Light sensor event rate in milliseconds for automatic brightness control. --> |
| <integer name="config_autoBrightnessLightSensorRate">250</integer> |
| |
| <!-- The maximum range of gamma adjustment possible using the screen |
| auto-brightness adjustment setting. --> |
| <fraction name="config_autoBrightnessAdjustmentMaxGamma">300%</fraction> |
| |
| <!-- If we allow automatic adjustment of screen brightness while dozing, how many times we want |
| to reduce it to preserve the battery. Value of 100% means no scaling. --> |
| <fraction name="config_screenAutoBrightnessDozeScaleFactor">100%</fraction> |
| |
| <!-- When the screen is turned on, the previous estimate of the ambient light level at the time |
| the screen was turned off is restored and is used to determine the initial screen |
| brightness. |
| |
| If this flag is true, then the ambient light level estimate will be promptly recomputed |
| after the warm-up interface and the screen brightness will be adjusted immediately. |
| |
| If this flag is false, then the ambient light level estimate will be adjusted more |
| gradually in the same manner that normally happens when the screen is on according to the |
| brightening or dimming debounce thresholds. As a result, it may take somewhat longer to |
| adapt to the environment. This mode may be better suited for watches. --> |
| <bool name="config_autoBrightnessResetAmbientLuxAfterWarmUp">true</bool> |
| |
| <!-- Screen brightness used to dim the screen when the user activity |
| timeout expires. May be less than the minimum allowed brightness setting |
| that can be set by the user. --> |
| <integer name="config_screenBrightnessDim">10</integer> |
| <item name="config_screenBrightnessDimFloat" format="float" type="dimen">0.05</item> |
| |
| <!-- If the screen brightness is already set at or below config_screenBrightnessDim, and the |
| user activity timeout expires, we still want to dim the screen slightly to indicate that |
| the device is about to go to sleep. The screen will dim by this amount in that case. |
| --> |
| <item name="config_screenBrightnessMinimumDimAmountFloat" format="float" type="dimen">0.04</item> |
| |
| <!-- Minimum allowable screen brightness to use in a very dark room. |
| This value sets the floor for the darkest possible auto-brightness |
| adjustment. It is expected to be somewhat less than the first entry in |
| config_autoBrightnessLcdBacklightValues so as to allow the user to have |
| some range of adjustment to dim the screen further than usual in very |
| dark rooms. The contents of the screen must still be clearly visible |
| in darkness (although they may not be visible in a bright room). --> |
| <integer name="config_screenBrightnessDark">1</integer> |
| |
| <!-- Array of lux values to define the minimum brightness curve, which guarantees that any |
| brightness curve that dips below it is rejected by the system. |
| This prevents auto-brightness from setting the screen so dark as to prevent the user from |
| resetting or disabling it. |
| |
| The values must be non-negative and strictly increasing, and correspond to the values in |
| the config_minimumBrightnessCurveNits array. --> |
| <array name="config_minimumBrightnessCurveLux"> |
| <item>0.0</item> |
| <item>2000.0</item> |
| <item>4000.0</item> |
| </array> |
| |
| <!-- Array of nits values to define the minimum brightness curve, which guarantees that any |
| brightness curve that dips below it is rejected by the system. |
| This should map lux to the absolute minimum nits that are still readable in that ambient |
| brightness. |
| |
| The values must be non-negative and non-decreasing, and correspond to the values in the |
| config_minimumBrightnessCurveLux array. --> |
| <array name="config_minimumBrightnessCurveNits"> |
| <item>0.0</item> |
| <item>50.0</item> |
| <item>90.0</item> |
| </array> |
| |
| <!-- Array of light sensor lux values to define our levels for auto backlight brightness support. |
| The N entries of this array define N + 1 control points as follows: |
| (1-based arrays) |
| |
| Point 1: (0, value[1]): lux <= 0 |
| Point 2: (level[1], value[2]): 0 < lux <= level[1] |
| Point 3: (level[2], value[3]): level[2] < lux <= level[3] |
| ... |
| Point N+1: (level[N], value[N+1]): level[N] < lux |
| |
| The control points must be strictly increasing. Each control point |
| corresponds to an entry in the brightness backlight values arrays. |
| For example, if lux == level[1] (first element of the levels array) |
| then the brightness will be determined by value[2] (second element |
| of the brightness values array). |
| |
| Spline interpolation is used to determine the auto-brightness |
| backlight values for lux levels between these control points. |
| |
| Must be overridden in platform specific overlays --> |
| <integer-array name="config_autoBrightnessLevels"> |
| </integer-array> |
| |
| <!-- Array of light sensor lux values to define our levels for auto backlight brightness |
| support whilst in idle mode. |
| The N entries of this array define N + 1 control points as follows: |
| (1-based arrays) |
| |
| Point 1: (0, value[1]): lux <= 0 |
| Point 2: (level[1], value[2]): 0 < lux <= level[1] |
| Point 3: (level[2], value[3]): level[2] < lux <= level[3] |
| ... |
| Point N+1: (level[N], value[N+1]): level[N] < lux |
| |
| The control points must be strictly increasing. Each control point |
| corresponds to an entry in the brightness backlight values arrays. |
| For example, if lux == level[1] (first element of the levels array) |
| then the brightness will be determined by value[2] (second element |
| of the brightness values array). |
| |
| Spline interpolation is used to determine the auto-brightness |
| backlight values for lux levels between these control points. |
| |
| Must be overridden in platform specific overlays --> |
| <integer-array name="config_autoBrightnessLevelsIdle"> |
| </integer-array> |
| |
| <!-- Timeout (in milliseconds) after which we remove the effects any user interactions might've |
| had on the brightness mapping. This timeout doesn't start until we transition to a |
| non-interactive display policy so that we don't reset while users are using their devices, |
| but also so that we don't erroneously keep the short-term model if the device is dozing |
| but the display is fully on. --> |
| <integer name="config_autoBrightnessShortTermModelTimeout">300000</integer> |
| |
| <!-- Timeout (in milliseconds) after which we start the animation "Android |
| is starting" --> |
| <integer name="config_progressTimeoutFallbackHome">2000</integer> |
| |
| <!-- Array of output values for LCD backlight corresponding to the lux values |
| in the config_autoBrightnessLevels array. This array should have size one greater |
| than the size of the config_autoBrightnessLevels array. |
| The brightness values must be between 0 and 255 and be non-decreasing. |
| This must be overridden in platform specific overlays --> |
| <integer-array name="config_autoBrightnessLcdBacklightValues"> |
| </integer-array> |
| |
| <!-- Array of output values for LCD backlight in doze mode corresponding to the lux values |
| in the config_autoBrightnessLevels array. This array should have size one greater |
| than the size of the config_autoBrightnessLevels array. |
| The brightness values must be between 0 and 255 and be non-decreasing. |
| This must be overridden in platform specific overlays --> |
| <integer-array name="config_autoBrightnessLcdBacklightValues_doze"> |
| </integer-array> |
| |
| <!-- Enables idle screen brightness mode on this device. |
| If this is true, config_autoBrightnessDisplayValuesNitsIdle must be defined. --> |
| <bool name="config_enableIdleScreenBrightnessMode">false</bool> |
| |
| <!-- Array of desired screen brightness in nits corresponding to the lux values |
| in the config_autoBrightnessLevels array. As with config_screenBrightnessMinimumNits and |
| config_screenBrightnessMaximumNits, the display brightness is defined as the measured |
| brightness of an all-white image. |
| |
| If this is defined then: |
| - config_autoBrightnessLcdBacklightValues should not be defined |
| - config_screenBrightnessNits must be defined |
| - config_screenBrightnessBacklight must be defined |
| |
| This array should have size one greater than the size of the config_autoBrightnessLevels |
| array. The brightness values must be non-negative and non-decreasing. This must be |
| overridden in platform specific overlays --> |
| <array name="config_autoBrightnessDisplayValuesNits"> |
| </array> |
| |
| <!-- Array of desired screen brightness in nits for idle screen brightness mode. |
| This array should meet the same requirements as config_autoBrightnessDisplayValuesNits. |
| This array also corresponds to the lux values given in config_autoBrightnessLevelsIdle. |
| In order to activate this mode, config_enableIdleScreenBrightnessMode must be true. --> |
| <array name="config_autoBrightnessDisplayValuesNitsIdle"> |
| </array> |
| |
| <!-- Array of output values for button backlight corresponding to the luX values |
| in the config_autoBrightnessLevels array. This array should have size one greater |
| than the size of the config_autoBrightnessLevels array. |
| The brightness values must be between 0 and 255 and be non-decreasing. |
| This must be overridden in platform specific overlays --> |
| <integer-array name="config_autoBrightnessButtonBacklightValues"> |
| </integer-array> |
| |
| <!-- Array of output values for keyboard backlight corresponding to the lux values |
| in the config_autoBrightnessLevels array. This array should have size one greater |
| than the size of the config_autoBrightnessLevels array. |
| The brightness values must be between 0 and 255 and be non-decreasing. |
| This must be overridden in platform specific overlays --> |
| <integer-array name="config_autoBrightnessKeyboardBacklightValues"> |
| </integer-array> |
| |
| <!-- An array describing the screen's backlight values corresponding to the brightness |
| values in the config_screenBrightnessNits array. |
| |
| This array should be equal in size to config_screenBrightnessBacklight. --> |
| <integer-array name="config_screenBrightnessBacklight"> |
| </integer-array> |
| |
| <!-- An array of floats describing the screen brightness in nits corresponding to the backlight |
| values in the config_screenBrightnessBacklight array. On OLED displays these values |
| should be measured with an all white image while the display is in the fully on state. |
| Note that this value should *not* reflect the maximum brightness value for any high |
| brightness modes but only the maximum brightness value obtainable in a sustainable manner. |
| |
| This array should be equal in size to config_screenBrightnessBacklight --> |
| <array name="config_screenBrightnessNits"> |
| </array> |
| |
| <!-- Array of ambient lux threshold values. This is used for determining hysteresis constraint |
| values by calculating the index to use for lookup and then setting the constraint value |
| to the corresponding value of the array. The new brightening hysteresis constraint value |
| is the n-th element of config_ambientBrighteningThresholds, and the new darkening |
| hysteresis constraint value is the n-th element of config_ambientDarkeningThresholds. |
| |
| The (zero-based) index is calculated as follows: (MAX is the largest index of the array) |
| condition calculated index |
| value < level[0] 0 |
| level[n] <= value < level[n+1] n+1 |
| level[MAX] <= value MAX+1 --> |
| <integer-array name="config_ambientThresholdLevels"> |
| </integer-array> |
| |
| <!-- Array of hysteresis constraint values for brightening, represented as tenths of a |
| percent. The length of this array is assumed to be one greater than |
| config_ambientThresholdLevels. The brightening threshold is calculated as |
| lux * (1.0f + CONSTRAINT_VALUE). When the current lux is higher than this threshold, |
| the screen brightness is recalculated. See the config_ambientThresholdLevels |
| description for how the constraint value is chosen. --> |
| <integer-array name="config_ambientBrighteningThresholds"> |
| <item>100</item> |
| </integer-array> |
| |
| <!-- Array of hysteresis constraint values for darkening, represented as tenths of a |
| percent. The length of this array is assumed to be one greater than |
| config_ambientThresholdLevels. The darkening threshold is calculated as |
| lux * (1.0f - CONSTRAINT_VALUE). When the current lux is lower than this threshold, |
| the screen brightness is recalculated. See the config_ambientThresholdLevels |
| description for how the constraint value is chosen. --> |
| <integer-array name="config_ambientDarkeningThresholds"> |
| <item>200</item> |
| </integer-array> |
| |
| <!-- Array of screen brightness threshold values. This is used for determining hysteresis |
| constraint values by calculating the index to use for lookup and then setting the |
| constraint value to the corresponding value of the array. The new brightening hysteresis |
| constraint value is the n-th element of config_screenBrighteningThresholds, and the new |
| darkening hysteresis constraint value is the n-th element of |
| config_screenDarkeningThresholds. |
| |
| The (zero-based) index is calculated as follows: (MAX is the largest index of the array) |
| condition calculated index |
| value < level[0] 0 |
| level[n] <= value < level[n+1] n+1 |
| level[MAX] <= value MAX+1 --> |
| <integer-array name="config_screenThresholdLevels"> |
| </integer-array> |
| |
| <!-- Array of hysteresis constraint values for brightening, represented as tenths of a |
| percent. The length of this array is assumed to be one greater than |
| config_screenThresholdLevels. The brightening threshold is calculated as |
| screenBrightness * (1.0f + CONSTRAINT_VALUE). When the new screen brightness is higher |
| than this threshold, it is applied. See the config_screenThresholdLevels description for |
| how the constraint value is chosen. --> |
| <integer-array name="config_screenBrighteningThresholds"> |
| <item>100</item> |
| </integer-array> |
| |
| <!-- Array of hysteresis constraint values for darkening, represented as tenths of a |
| percent. The length of this array is assumed to be one greater than |
| config_screenThresholdLevels. The darkening threshold is calculated as |
| screenBrightness * (1.0f - CONSTRAINT_VALUE). When the new screen brightness is lower than |
| this threshold, it is applied. See the config_screenThresholdLevels description for how |
| the constraint value is chosen. --> |
| <integer-array name="config_screenDarkeningThresholds"> |
| <item>200</item> |
| </integer-array> |
| |
| <!-- Amount of time it takes for the light sensor to warm up in milliseconds. |
| For this time after the screen turns on, the Power Manager |
| will not debounce light sensor readings --> |
| <integer name="config_lightSensorWarmupTime">0</integer> |
| |
| <!-- Enables swipe versus poly-finger touch disambiguation in the KeyboardView --> |
| <bool name="config_swipeDisambiguation">true</bool> |
| |
| <!-- Specifies the amount of time to disable virtual keys after the screen is touched |
| in order to filter out accidental virtual key presses due to swiping gestures |
| or taps near the edge of the display. May be 0 to disable the feature. |
| It is recommended that this value be no more than 250 ms. |
| This feature should be disabled for most devices. --> |
| <integer name="config_virtualKeyQuietTimeMillis">0</integer> |
| |
| <!-- A list of potential packages, in priority order, that may contain an |
| ephemeral resolver. Each package will be be queried for a component |
| that has been granted the PACKAGE_EPHEMERAL_AGENT permission. |
| This may be empty if ephemeral apps are not supported. --> |
| <string-array name="config_ephemeralResolverPackage" translatable="false"> |
| <!-- Add packages here --> |
| </string-array> |
| |
| <!-- The set of system packages on device that are queryable by any app regardless of the |
| contents of its manifest. --> |
| <string-array name="config_forceQueryablePackages" translatable="false"> |
| <item>com.android.settings</item> |
| <item>com.android.providers.settings</item> |
| <!-- Add packages here --> |
| </string-array> |
| |
| <!-- If true, will force all packages on any system partition as queryable by any app regardless |
| of the contents of its manifest. --> |
| <bool name="config_forceSystemPackagesQueryable">false</bool> |
| |
| <!-- Component name of the default wallpaper. This will be ImageWallpaper if not |
| specified --> |
| <string name="default_wallpaper_component" translatable="false">@null</string> |
| |
| <!-- By default a product has no distinct default lock wallpaper --> |
| <item name="default_lock_wallpaper" type="drawable">@null</item> |
| |
| <!-- Component name of the built in wallpaper used to display bitmap wallpapers. This must not be null. --> |
| <string name="image_wallpaper_component" translatable="false">com.android.systemui/com.android.systemui.ImageWallpaper</string> |
| |
| <!-- True if WallpaperService is enabled --> |
| <bool name="config_enableWallpaperService">true</bool> |
| |
| <!-- True if the device should block turning display on at boot until wallpaper is ready --> |
| <bool name="config_checkWallpaperAtBoot">true</bool> |
| |
| <!-- Class name of WallpaperManagerService. --> |
| <string name="config_wallpaperManagerServiceName" translatable="false">com.android.server.wallpaper.WallpaperManagerService</string> |
| |
| <!-- Specifies priority of automatic time sources. Suggestions from higher entries in the list |
| take precedence over lower ones. |
| See com.android.server.timedetector.TimeDetectorStrategy for available sources. --> |
| <string-array name="config_autoTimeSourcesPriority"> |
| <item>network</item> |
| <item>telephony</item> |
| </string-array> |
| |
| <!-- Enables the GnssTimeUpdate service. This is the global switch for enabling Gnss time based |
| suggestions to TimeDetector service. See also config_autoTimeSourcesPriority. --> |
| <bool name="config_enableGnssTimeUpdateService">false</bool> |
| |
| <!-- Enables the TimeZoneRuleManager service. This is the global switch for the updateable time |
| zone update mechanism. --> |
| <bool name="config_enableUpdateableTimeZoneRules">false</bool> |
| |
| <!-- Enables APK-based time zone update triggering. Set this to false when updates are triggered |
| via external events and not by APK updates. For example, if an updater checks with a server |
| on a regular schedule. |
| [This is only used if config_enableUpdateableTimeZoneRules is true.] --> |
| <bool name="config_timeZoneRulesUpdateTrackingEnabled">false</bool> |
| |
| <!-- The package of the time zone rules updater application. Expected to be the same |
| for all Android devices that support APK-based time zone rule updates. |
| A package-targeted com.android.intent.action.timezone.TRIGGER_RULES_UPDATE_CHECK intent |
| will be sent to the updater app if the system server detects an update to the updater or |
| data app packages. |
| The package referenced here must have the android.permission.UPDATE_TIME_ZONE_RULES |
| permission. |
| [This is only used if config_enableUpdateableTimeZoneRules and |
| config_timeZoneRulesUpdateTrackingEnabled are true.] --> |
| <string name="config_timeZoneRulesUpdaterPackage" translatable="false">com.android.timezone.updater</string> |
| |
| <!-- The package of the time zone rules data application. Expected to be configured |
| by OEMs to reference their own priv-app APK package. |
| A package-targeted com.android.intent.action.timezone.TRIGGER_RULES_UPDATE_CHECK intent |
| will be sent to the updater app if the system server detects an update to the updater or |
| data app packages. |
| [This is only used if config_enableUpdateableTimeZoneRules and |
| config_timeZoneRulesUpdateTrackingEnabled are true.] --> |
| <string name="config_timeZoneRulesDataPackage" translatable="false"></string> |
| |
| <!-- The allowed time in milliseconds between an update check intent being broadcast and the |
| response being considered overdue. Reliability triggers will not fire in this time. |
| [This is only used if config_enableUpdateableTimeZoneRules and |
| config_timeZoneRulesUpdateTrackingEnabled are true.] --> |
| <!-- 5 minutes --> |
| <integer name="config_timeZoneRulesCheckTimeMillisAllowed">300000</integer> |
| |
| <!-- The number of times a time zone update check is allowed to fail before the system will stop |
| reacting to reliability triggers. |
| [This is only used if config_enableUpdateableTimeZoneRules and |
| config_timeZoneRulesUpdateTrackingEnabled are true.] --> |
| <integer name="config_timeZoneRulesCheckRetryCount">5</integer> |
| |
| <!-- Whether the geolocation time zone detection feature is enabled. Setting this to false means |
| the feature cannot be used. Setting this to true means system server components can be |
| tested and location time zone detection may be used if other configuration allows (see |
| location time zone provider configuration settings below). --> |
| <bool name="config_enableGeolocationTimeZoneDetection" translatable="false">true</bool> |
| |
| <!-- Whether the primary location time zone provider is enabled. |
| This setting is ignored if config_enableGeolocationTimeZoneDetection is false. |
| |
| AOSP does not configure a primary location time zone provider. --> |
| <bool name="config_enablePrimaryLocationTimeZoneProvider" translatable="false">false</bool> |
| |
| <!-- The package hosting the primary location time zone provider. |
| Only used when config_enableGeolocationTimeZoneDetection and |
| config_enablePrimaryLocationTimeZoneProvider are true. |
| |
| See android.service.timezone.TimeZoneProviderService for how to host location time zone |
| provider services. --> |
| <string name="config_primaryLocationTimeZoneProviderPackageName" translatable="false"></string> |
| |
| <!-- Whether the secondary location time zone provider is enabled. |
| This setting is ignored if config_enableGeolocationTimeZoneDetection is false. |
| |
| AOSP does not configure a secondary location time zone provider. --> |
| <bool name="config_enableSecondaryLocationTimeZoneProvider" translatable="false">false</bool> |
| |
| <!-- The package hosting the secondary location time zone provider. |
| Only used when config_enableGeolocationTimeZoneDetection and |
| config_enableSecondaryLocationTimeZoneProvider are true. |
| |
| See android.service.timezone.TimeZoneProviderService for how to host location time zone |
| provider services. --> |
| <string name="config_secondaryLocationTimeZoneProviderPackageName" translatable="false"></string> |
| |
| <!-- Whether the time zone detection logic supports fall back from geolocation suggestions to |
| telephony suggestions temporarily in certain circumstances. Reduces time zone detection |
| latency during some scenarios like air travel. Only useful when both geolocation and |
| telephony time zone detection are supported on a device. |
| See com.android.server.timezonedetector.TimeZoneDetectorStrategy for more information. --> |
| <bool name="config_supportTelephonyTimeZoneFallback" translatable="false">true</bool> |
| |
| <!-- Whether to enable network location overlay which allows network location provider to be |
| replaced by an app at run-time. When disabled, only the |
| config_networkLocationProviderPackageName package will be searched for network location |
| provider, otherwise any system package is eligible. Anyone who wants to disable the overlay |
| mechanism can set it to false. --> |
| <bool name="config_enableNetworkLocationOverlay" translatable="false">true</bool> |
| <!-- Package name providing network location support. Used only when |
| config_enableNetworkLocationOverlay is false. --> |
| <string name="config_networkLocationProviderPackageName" translatable="false">@null</string> |
| |
| <!-- Whether to enable fused location provider overlay which allows fused location provider to |
| be replaced by an app at run-time. When disabled, only the |
| config_fusedLocationProviderPackageName package will be searched for fused location |
| provider, otherwise any system package is eligible. Anyone who wants to disable the overlay |
| mechanism can set it to false. --> |
| <bool name="config_enableFusedLocationOverlay" translatable="false">true</bool> |
| <!-- Package name providing fused location support. Used only when |
| config_enableFusedLocationOverlay is false. --> |
| <string name="config_fusedLocationProviderPackageName" translatable="false">com.android.location.fused</string> |
| |
| <!-- Default value for the ADAS GNSS Location Enabled setting if this setting has never been |
| set before. --> |
| <bool name="config_defaultAdasGnssLocationEnabled" translatable="false">false</bool> |
| |
| <string-array name="config_locationExtraPackageNames" translatable="false"></string-array> |
| |
| <!-- The package name of the default network recommendation app. |
| A network recommendation provider must: |
| * Be granted the SCORE_NETWORKS permission. |
| * Be granted the ACCESS_COARSE_LOCATION permission. |
| * Include a Service for the android.net.scoring.RECOMMEND_NETWORKS action |
| protected by the BIND_NETWORK_RECOMMENDATION_SERVICE permission. |
| |
| This must be set to a valid network recommendation app or empty. |
| --> |
| <string name="config_defaultNetworkRecommendationProviderPackage" translatable="false"></string> |
| |
| <!-- The package name of the default search selector app. Must be granted the POST_NOTIFICATIONS |
| permission. |
| --> |
| <string name="config_defaultSearchSelectorPackageName" translatable="false"></string> |
| |
| <!-- The package name of the default captive portal login app. Must be granted the |
| POST_NOTIFICATIONS permission. |
| --> |
| <string name="config_defaultCaptivePortalLoginPackageName" translatable="false"></string> |
| |
| <!-- Whether to enable geocoder overlay which allows geocoder to be replaced |
| by an app at run-time. When disabled, only the |
| config_geocoderProviderPackageName package will be searched for |
| geocoder, otherwise any system package is eligible. Anyone who wants to |
| disable the overlay mechanism can set it to false. |
| --> |
| <bool name="config_enableGeocoderOverlay" translatable="false">true</bool> |
| <!-- Package name providing geocoder API support. Used only when |
| config_enableGeocoderOverlay is false. --> |
| <string name="config_geocoderProviderPackageName" translatable="false">@null</string> |
| |
| <!-- Whether to enable geofence overlay which allows geofence to be replaced |
| by an app at run-time. When disabled, only the |
| config_geofenceProviderPackageName package will be searched for |
| geofence implementation, otherwise any system package is eligible. Anyone who |
| wants to disable the overlay mechanism can set it to false. |
| --> |
| <bool name="config_enableGeofenceOverlay" translatable="false">true</bool> |
| <!-- Package name providing geofence API support. Used only when |
| config_enableGeofenceOverlay is false. --> |
| <string name="config_geofenceProviderPackageName" translatable="false">@null</string> |
| |
| <!-- Whether to enable Hardware Activity-Recognition overlay which allows Hardware |
| Activity-Recognition to be replaced by an app at run-time. When disabled, only the |
| config_activityRecognitionHardwarePackageName package will be searched for |
| its implementation, otherwise any system package is eligible. Anyone who |
| wants to disable the overlay mechanism can set it to false. |
| --> |
| <bool name="config_enableActivityRecognitionHardwareOverlay" translatable="false">true</bool> |
| <!-- Package name providing Hardware Activity-Recognition API support. Used only when |
| config_enableActivityRecognitionHardwareOverlay is false. --> |
| <string name="config_activityRecognitionHardwarePackageName" translatable="false">@null</string> |
| |
| <!-- Package name(s) containing location provider support. These packages will be auto-granted |
| several permissions by the system, and should be system packages. --> |
| <string-array name="config_locationProviderPackageNames" translatable="false"> |
| <!-- The standard AOSP fused location provider --> |
| <item>com.android.location.fused</item> |
| </string-array> |
| |
| <!-- Package name(s) of Advanced Driver Assistance applications. These packages have additional |
| management of access to location, specific to driving assistance use-cases. They must be system |
| packages. This configuration is only applicable to devices that declare |
| PackageManager.FEATURE_AUTOMOTIVE. --> |
| <string-array name="config_locationDriverAssistancePackageNames" translatable="false"> |
| </string-array> |
| |
| <!-- This string array can be overriden to enable test location providers initially. --> |
| <!-- Array of "[locationProviderName],[requiresNetwork], |
| [requiresSatellite],[requiresCell],[hasMonetaryCost], |
| [supportAltitute],[supportsSpeed],[supportsBearing], |
| [powerRequirement],[accuracy]" --> |
| <!-- powerRequirement is defined in android.location.Criteria |
| 0 = NO_REQUIREMENT / 1 = POWER_LOW / 2 = POWER_MEDIUM / 3 = POWER_HIGH --> |
| <!-- accuracy is defined in anroid.location.Criteria |
| 1 = ACCURACY_FINE / 2 = ACCURACY_COARSE --> |
| <string-array name="config_testLocationProviders" translatable="false"> |
| <!-- Example test network location provider |
| <item>network,false,false,false,false,true,true,true,1,2</item> |
| --> |
| </string-array> |
| |
| <!-- Optional IPsec algorithms enabled by this device, defaulting to empty. OEMs can override |
| it by providing a list of algorithm names in an overlay config.xml file. |
| |
| As Android releases new versions, more algorithms are becoming mandatory. Mandatory |
| algorithms will be automatically enabled on the device. Optional algorithms need |
| to be explicitly declared in this resource to be enabled. |
| * SDK level 28 makes the following algorithms mandatory : "cbc(aes)", "hmac(md5)", |
| "hmac(sha1)", "hmac(sha256)", "hmac(sha384)", "hmac(sha512)", "rfc4106(gcm(aes))" |
| * SDK level 31 makes the following algorithms mandatory : "rfc3686(ctr(aes))", |
| "xcbc(aes)", "cmac(aes)", "rfc7539esp(chacha20,poly1305)" |
| --> |
| <string-array name="config_optionalIpSecAlgorithms" translatable="false"> |
| <!-- Add algorithm here --> |
| </string-array> |
| |
| <!-- Boolean indicating if placing the phone face down will result in a screen off. --> |
| <bool name="config_flipToScreenOffEnabled">true</bool> |
| |
| <!-- Integer to set a max latency the accelerometer will batch sensor requests with. --> |
| <integer name="config_flipToScreenOffMaxLatencyMicros">2000000</integer> |
| |
| <!-- Note: This config is deprecated |
| Boolean indicating if current platform supports bluetooth SCO for off call |
| use cases |
| --> |
| <bool name="config_bluetooth_sco_off_call">true</bool> |
| |
| <!-- Note: This config is deprecated |
| Boolean indicating if current platform need do one-time bluetooth address |
| re-validation |
| --> |
| <bool name="config_bluetooth_address_validation">false</bool> |
| |
| <!-- Note: This config is deprecated, use BluetoothProperties instead. |
| Idle current for bluetooth controller. 0 by default |
| --> |
| <integer translatable="false" name="config_bluetooth_idle_cur_ma">0</integer> |
| |
| <!-- Note: This config is deprecated, use BluetoothProperties instead. |
| Rx current for bluetooth controller. 0 by default |
| --> |
| <integer translatable="false" name="config_bluetooth_rx_cur_ma">0</integer> |
| |
| <!-- Note: This config is deprecated, use BluetoothProperties instead. |
| Tx current for bluetooth controller. 0 by default |
| --> |
| <integer translatable="false" name="config_bluetooth_tx_cur_ma">0</integer> |
| |
| <!-- Note: This config is deprecated, use BluetoothProperties instead. |
| Operating volatage for bluetooth controller. 0 by default |
| --> |
| <integer translatable="false" name="config_bluetooth_operating_voltage_mv">0</integer> |
| |
| <!-- The default data-use polling period. --> |
| <integer name="config_datause_polling_period_sec">600</integer> |
| |
| <!-- The default data-use threshold in bytes. 0 disables--> |
| <integer name="config_datause_threshold_bytes">0</integer> |
| |
| <!-- The default reduced-datarate value in kilobits per sec --> |
| <integer name="config_datause_throttle_kbitsps">300</integer> |
| |
| <!-- The default iface on which to monitor data use --> |
| <string name="config_datause_iface" translatable="false">rmnet0</string> |
| |
| <!-- The default reduced-datarate notification mask --> |
| <!-- 2 means give warning --> |
| <integer name="config_datause_notification_type">2</integer> |
| |
| <!-- If Voice Radio Technology is RIL_RADIO_TECHNOLOGY_LTE:14 or |
| RIL_RADIO_TECHNOLOGY_UNKNOWN:0 this is the value that should be used instead. |
| A configuration value of RIL_RADIO_TECHNOLOGY_UNKNOWN:0 means |
| there is no replacement value and that the default assumption |
| for phone type (GSM) should be used. --> |
| <integer name="config_volte_replacement_rat">0</integer> |
| |
| <!-- Flag indicating whether the current device is "voice capable". |
| If true, this means that the device supports circuit-switched |
| (i.e. voice) phone calls over the telephony network, and is |
| allowed to display the in-call UI while a cellular voice call is |
| active. This can be overridden to false for "data only" devices |
| which can't make voice calls and don't support any in-call UI. |
| |
| Note: this flag is subtly different from the |
| PackageManager.FEATURE_TELEPHONY system feature, which is |
| available on *any* device with a telephony radio, even if the |
| device is data-only. --> |
| <bool name="config_voice_capable">true</bool> |
| |
| <!-- Flag indicating whether all audio streams should be mapped to |
| one single stream. If true, all audio streams are mapped to |
| STREAM_MUSIC as if it's on TV platform. --> |
| <bool name="config_single_volume">false</bool> |
| |
| <!-- Flag indicating whether platform level volume adjustments are enabled for remote sessions |
| on grouped devices. --> |
| <bool name="config_volumeAdjustmentForRemoteGroupSessions">true</bool> |
| |
| <!-- Flag indicating that an outbound call must have a call capable phone account |
| that has declared it can process the call's handle. --> |
| <bool name="config_requireCallCapableAccountForHandle">false</bool> |
| |
| <!-- Flag indicating if the user is notified when the mobile network access is restricted --> |
| <bool name="config_user_notification_of_restrictied_mobile_access">true</bool> |
| |
| <!-- Flag indicating whether the current device allows sms service. |
| If true, this means that the device supports both sending and |
| receiving sms via the telephony network. |
| This can be overridden to false for "data only" devices |
| which can't send and receive sms message. |
| |
| Note: Disable SMS also disable voicemail waiting sms, |
| cell broadcasting sms, and MMS. --> |
| <bool name="config_sms_capable">true</bool> |
| |
| <!-- Default SMS Application. This will be the default SMS application when |
| the phone first boots. The user can then change the default app to one |
| of their choosing. |
| This can be overridden for devices where a different default SMS |
| application is desired. |
| |
| If this string is empty or the specified package does not exist, then |
| the platform will search for an SMS app and use that (if there is one) |
| |
| Note: This config is deprecated, please use config_defaultSms instead. --> |
| <string name="default_sms_application" translatable="false">com.android.messaging</string> |
| |
| <!-- Flag indicating whether the current device supports "Ask every time" for sms--> |
| <bool name="config_sms_ask_every_time_support">true</bool> |
| |
| <!-- Flag indicating whether the current device allows data. |
| If true, this means that the device supports data connectivity through |
| the telephony network. |
| This can be overridden to false for devices that support voice and/or sms . --> |
| <bool name="config_mobile_data_capable">true</bool> |
| |
| <!-- Default web browser. This is the package name of the application that will |
| be the default browser when the device first boots. Afterwards the user |
| can select whatever browser app they wish to use as the default. |
| |
| If this string is empty or the specified package does not exist, then |
| the behavior will be as though no app was named as an explicit default. |
| |
| Note: This config is deprecated, please use config_defaultBrowser instead. --> |
| <string name="default_browser" translatable="false"></string> |
| |
| <!-- The name of the package that will hold the assistant role by default. --> |
| <string name="config_defaultAssistant" translatable="false" /> |
| <!-- Whether the default assistant settings should be shown. --> |
| <bool name="config_showDefaultAssistant">true</bool> |
| <!-- The name of the package that will hold the browser role by default. --> |
| <string name="config_defaultBrowser" translatable="false">@string/default_browser</string> |
| <!-- The name of the package that will hold the dialer role by default. --> |
| <string name="config_defaultDialer" translatable="false">com.android.dialer</string> |
| <!-- The name of the package that will hold the SMS role by default. --> |
| <string name="config_defaultSms" translatable="false">@string/default_sms_application</string> |
| <!-- Whether the default emergency settings should be shown. --> |
| <bool name="config_showDefaultEmergency">false</bool> |
| <!-- Whether the default home settings should be shown. --> |
| <bool name="config_showDefaultHome">true</bool> |
| <!-- The name of the package that will hold the call redirection role by default. --> |
| <string name="config_defaultCallRedirection" translatable="false"></string> |
| <!-- The name of the package that will hold the call screening role by default. --> |
| <string name="config_defaultCallScreening" translatable="false"></string> |
| <!-- The name of the package that will hold the system gallery role. --> |
| <string name="config_systemGallery" translatable="false">com.android.gallery3d</string> |
| <!-- The names of the packages that will hold the automotive projection role. --> |
| <string name="config_systemAutomotiveProjection" translatable="false"></string> |
| <!-- The name of the package that will hold the system cluster service role. --> |
| <string name="config_systemAutomotiveCluster" translatable="false"></string> |
| <!-- The name of the package that will hold the system shell role. --> |
| <string name="config_systemShell" translatable="false">com.android.shell</string> |
| <!-- The name of the package that will hold the system contacts role. --> |
| <string name="config_systemContacts" translatable="false">com.android.contacts</string> |
| <!-- The name of the package that will hold the speech recognizer role by default. --> |
| <string name="config_systemSpeechRecognizer" translatable="false"></string> |
| <!-- The name of the package that will hold the system Wi-Fi coex manager role. --> |
| <string name="config_systemWifiCoexManager" translatable="false"></string> |
| <!-- The name of the package that will hold the wellbeing role. --> |
| <string name="config_systemWellbeing" translatable="false"></string> |
| <!-- The name of the package that will hold the game service role. --> |
| <string name="config_systemGameService" translatable="false"></string> |
| <!-- The name of the package that will hold the television notification handler role --> |
| <string name="config_systemTelevisionNotificationHandler" translatable="false"></string> |
| <!-- The name of the package that will hold the system activity recognizer role. --> |
| <string name="config_systemActivityRecognizer" translatable="false"></string> |
| <!-- The name of the package that will hold the system ui role --> |
| <string name="config_systemUi" translatable="false">com.android.systemui</string> |
| <!-- The name of the package that will hold the television remote service role. |
| TODO(b/189347385) make this a @SystemAPI --> |
| <string name="config_systemTelevisionRemoteService" translatable="false">@string/config_tvRemoteServicePackage</string> |
| <!-- The name of the package that will hold the device management role --> |
| <string name="config_devicePolicyManagement" translatable="false"></string> |
| <!-- The name of the package that will hold the app protection service role. --> |
| <string name="config_systemAppProtectionService" translatable="false"></string> |
| <!-- The name of the package that will hold the system calendar sync manager role. --> |
| <string name="config_systemAutomotiveCalendarSyncManager" translatable="false"></string> |
| <!-- The name of the package that will hold the default automotive navigation role. --> |
| <string name="config_defaultAutomotiveNavigation" translatable="false"></string> |
| |
| <!-- The name of the package that will handle updating the device management role. --> |
| <string name="config_devicePolicyManagementUpdater" translatable="false"></string> |
| |
| <!-- The name of the package that will be allowed to change its components' label/icon. --> |
| <string name="config_overrideComponentUiPackage" translatable="false">com.android.stk</string> |
| |
| <!-- IP address of the dns server to use if nobody else suggests one --> |
| <string name="config_default_dns_server" translatable="false">8.8.8.8</string> |
| |
| <!-- The default mobile provisioning apn. Empty by default, maybe overridden by |
| an mcc/mnc specific config.xml --> |
| <string name="mobile_provisioning_apn" translatable="false"></string> |
| |
| <!-- The default mobile provisioning url. Empty by default, maybe overridden by |
| an mcc/mnc specific config.xml --> |
| <string name="mobile_provisioning_url" translatable="false"></string> |
| |
| <!-- The default character set for GsmAlphabet --> |
| <!-- Empty string means MBCS is not considered --> |
| <string name="gsm_alphabet_default_charset" translatable="false"></string> |
| |
| <!-- Enables SIP on WIFI only --> |
| <bool name="config_sip_wifi_only">false</bool> |
| |
| <!-- Enables built-in SIP phone capability --> |
| <bool name="config_built_in_sip_phone">true</bool> |
| |
| <!-- Boolean indicating if restoring network selection should be skipped --> |
| <!-- The restoring is handled by modem if it is true--> |
| <bool translatable="false" name="skip_restoring_network_selection">false</bool> |
| |
| <!-- Maximum number of database connections opened and managed by framework layer |
| to handle queries on each database when using Write-Ahead Logging. --> |
| <integer name="db_connection_pool_size">4</integer> |
| |
| <!-- The default journal mode to use use when Write-Ahead Logging is not active. |
| Choices are: OFF, DELETE, TRUNCATE, PERSIST and MEMORY. |
| PERSIST may improve performance by reducing how often journal blocks are |
| reallocated (compared to truncation) resulting in better data block locality |
| and less churn of the storage media. |
| |
| The PERSIST mode results in data persisting in the journal beyond the life of |
| a transaction, so it interacts poorly with SECURE_DELETE. --> |
| <string name="db_default_journal_mode" translatable="false">TRUNCATE</string> |
| |
| <!-- Maximum size of the persistent journal file in bytes. |
| If the journal file grows to be larger than this amount then SQLite will |
| truncate it after committing the transaction. --> |
| <integer name="db_journal_size_limit">524288</integer> |
| |
| <!-- When opening a database with WAL enabled and if the wal file already exists and larger |
| than this size in bytes, we'll truncate it. --> |
| <integer name="db_wal_truncate_size">1048576</integer> |
| |
| <!-- The database synchronization mode when using the default journal mode. |
| FULL is safest and preserves durability at the cost of extra fsyncs. |
| NORMAL also preserves durability in non-WAL modes and uses checksums to ensure |
| integrity although there is a small chance that an error might go unnoticed. |
| Choices are: FULL, NORMAL, OFF. --> |
| <string name="db_default_sync_mode" translatable="false">FULL</string> |
| |
| <!-- The database synchronization mode when using Write-Ahead Logging. |
| From https://www.sqlite.org/pragma.html#pragma_synchronous: |
| WAL mode is safe from corruption with synchronous=NORMAL, and probably DELETE mode is safe |
| too on modern filesystems. WAL mode is always consistent with synchronous=NORMAL, but WAL |
| mode does lose durability. A transaction committed in WAL mode with |
| synchronous=NORMAL might roll back following a power loss or system crash. |
| Transactions are durable across application crashes regardless of the synchronous setting |
| or journal mode. The synchronous=NORMAL setting is a good choice for most applications |
| running in WAL mode. |
| Choices are: FULL, NORMAL, OFF. --> |
| <string name="db_wal_sync_mode" translatable="false">NORMAL</string> |
| |
| <!-- The Write-Ahead Log auto-checkpoint interval in database pages (typically 1 to 4KB). |
| The log is checkpointed automatically whenever it exceeds this many pages. |
| When a database is reopened, its journal mode is set back to the default |
| journal mode, which may cause a checkpoint operation to occur. Checkpoints |
| can also happen at other times when transactions are committed. |
| The bigger the WAL file, the longer a checkpoint operation takes, so we try |
| to keep the WAL file relatively small to avoid long delays. |
| The size of the WAL file is also constrained by 'db_journal_size_limit'. --> |
| <integer name="db_wal_autocheckpoint">100</integer> |
| |
| <!-- The number of milliseconds that SQLite connection is allowed to be idle before it |
| is closed and removed from the pool --> |
| <integer name="db_default_idle_connection_timeout">30000</integer> |
| |
| <!-- Max space (in MB) allocated to DownloadManager to store the downloaded |
| files if they are to be stored in DownloadManager's data dir, |
| which typically is /data/data/com.android.providers.downloads/files --> |
| <integer name="config_downloadDataDirSize">200</integer> |
| |
| <!-- Max number of downloads allowed to proceed concurrently --> |
| <integer name="config_MaxConcurrentDownloadsAllowed">5</integer> |
| |
| <!-- When the free space available in DownloadManager's data dir falls |
| below the percentage value specified by this param, DownloadManager |
| starts removing files to try to make percentage of available |
| free space above this threshold value. --> |
| <integer name="config_downloadDataDirLowSpaceThreshold">10</integer> |
| |
| <!-- The URL that should be sent in an x-wap-profile header with an HTTP request, |
| as defined in the Open Mobile Alliance User Agent Profile specification |
| OMA-TS-UAProf-V2_0-20060206-A Section 8.1.1.1. If the URL contains a '%s' |
| format string then that substring will be replaced with the value of |
| Build.MODEL. The format string shall not be escaped. --> |
| <string name="config_useragentprofile_url" translatable="false"></string> |
| |
| <!-- When a database query is executed, the results returned are paginated |
| in pages of size (in KB) indicated by this value --> |
| <integer name="config_cursorWindowSize">2048</integer> |
| |
| <!-- Sets whether menu shortcuts should be displayed on panel menus when |
| a keyboard is present. --> |
| <bool name="config_showMenuShortcutsWhenKeyboardPresent">false</bool> |
| |
| <!-- Do not translate. Defines the slots is Two Digit Number for dialing normally not USSD. |
| |
| Note: This config is deprecated, please use carrier config which is |
| CarrierConfigManager.KEY_MMI_TWO_DIGIT_NUMBER_PATTERN_STRING_ARRAY instead. --> |
| <string-array name="config_twoDigitNumberPattern" translatable="false"> |
| </string-array> |
| |
| <!-- If this value is true, Sms encoded as octet is decoded by utf8 decoder. |
| If false, decoded by Latin decoder. --> |
| <bool name="config_sms_utf8_support">false</bool> |
| |
| <!-- If this value is true, The mms content-disposition field is supported correctly. |
| If false, Content-disposition fragments are ignored --> |
| <bool name="config_mms_content_disposition_support">true</bool> |
| |
| <!-- MMS user agent string --> |
| <string name="config_mms_user_agent" translatable="false"></string> |
| |
| <!-- MMS user agent prolfile url --> |
| <string name="config_mms_user_agent_profile_url" translatable="false"></string> |
| |
| <!-- National Language Identifier codes for the following two config items. |
| (from 3GPP TS 23.038 V9.1.1 Table 6.2.1.2.4.1): |
| 0 - reserved |
| 1 - Turkish |
| 2 - Spanish (single shift table only) |
| 3 - Portuguese |
| 4 - Bengali |
| 5 - Gujarati |
| 6 - Hindi |
| 7 - Kannada |
| 8 - Malayalam |
| 9 - Oriya |
| 10 - Punjabi |
| 11 - Tamil |
| 12 - Telugu |
| 13 - Urdu |
| 14+ - reserved --> |
| |
| <!-- National language single shift tables to enable for SMS encoding. |
| Decoding is always enabled. 3GPP TS 23.038 states that this feature |
| should not be enabled until a formal request is issued by the relevant |
| national regulatory body. Array elements are codes from the table above. |
| Example 1: devices sold in Turkey must include table 1 to conform with |
| By-Law Number 27230. (http://www.btk.gov.tr/eng/pdf/2009/BY-LAW_SMS.pdf) |
| Example 2: devices sold in India should include tables 4 through 13 |
| to enable use of the new Release 9 tables for Indic languages. --> |
| <integer-array name="config_sms_enabled_single_shift_tables"></integer-array> |
| |
| <!-- National language locking shift tables to enable for SMS encoding. |
| Decoding is always enabled. 3GPP TS 23.038 states that this feature |
| should not be enabled until a formal request is issued by the relevant |
| national regulatory body. Array elements are codes from the table above. |
| Example 1: devices sold in Turkey must include table 1 after the |
| Turkish Telecommunication Authority requires locking shift encoding |
| to be enabled (est. July 2012). (http://www.btk.gov.tr/eng/pdf/2009/BY-LAW_SMS.pdf) |
| See also: http://www.mobitech.com.tr/tr/ersanozturkblog_en/index.php?entry=entry090223-160014 |
| Example 2: devices sold in India should include tables 4 through 13 |
| to enable use of the new Release 9 tables for Indic languages. --> |
| <integer-array name="config_sms_enabled_locking_shift_tables"></integer-array> |
| |
| <!-- Set to true if the RSSI should always display CDMA signal strength even on EVDO --> |
| <bool name="config_alwaysUseCdmaRssi">false</bool> |
| |
| |
| <!-- If this value is true, duplicate Source/Destination port fields |
| in WDP header of some carriers OMADM wap push are supported. |
| ex: MSGTYPE-TotalSegments-CurrentSegment |
| -SourcePortDestPort-SourcePortDestPort-OMADM PDU |
| If false, not supported. --> |
| <bool name="config_duplicate_port_omadm_wappush">false</bool> |
| |
| <!-- Maximum numerical value that will be shown in a status bar |
| notification icon or in the notification itself. Will be replaced |
| with @string/status_bar_notification_info_overflow when shown in the |
| UI. --> |
| <integer name="status_bar_notification_info_maxnum">999</integer> |
| |
| <!-- Path to an ISO image to be shared with via USB mass storage. |
| This is intended to allow packaging drivers or tools for installation on a PC. --> |
| <string translatable="false" name="config_isoImagePath"></string> |
| |
| <!-- Whether the system enables per-display focus. If the system has the input method for each |
| display, this value should be true. --> |
| <bool name="config_perDisplayFocusEnabled">false</bool> |
| |
| <!-- Whether a software navigation bar should be shown. NOTE: in the future this may be |
| autodetected from the Configuration. --> |
| <bool name="config_showNavigationBar">false</bool> |
| |
| <!-- Whether action menu items should be displayed in ALLCAPS or not. |
| Defaults to true. If this is not appropriate for specific locales |
| it should be disabled in that locale's resources. --> |
| <bool name="config_actionMenuItemAllCaps">true</bool> |
| |
| <!-- Remote server that can provide NTP responses. --> |
| <string translatable="false" name="config_ntpServer">time.android.com</string> |
| <!-- Normal polling frequency in milliseconds --> |
| <integer name="config_ntpPollingInterval">64800000</integer> |
| <!-- Try-again polling interval in milliseconds, in case the network request failed --> |
| <integer name="config_ntpPollingIntervalShorter">60000</integer> |
| <!-- Number of times to try again with the shorter interval, before backing |
| off until the normal polling interval. A value < 0 indicates infinite. --> |
| <integer name="config_ntpRetry">3</integer> |
| <!-- Timeout to wait for NTP server response in milliseconds. --> |
| <integer name="config_ntpTimeout">5000</integer> |
| |
| <!-- Default network policy warning threshold, in megabytes. --> |
| <integer name="config_networkPolicyDefaultWarning">2048</integer> |
| |
| <!-- Set and Unsets WiMAX --> |
| <bool name="config_wimaxEnabled">false</bool> |
| <!-- Location of the wimax framwork jar location --> |
| <string name="config_wimaxServiceJarLocation" translatable="false"></string> |
| <!-- Location of the wimax native library locaiton --> |
| <string name="config_wimaxNativeLibLocation" translatable="false"></string> |
| <!-- Name of the wimax manager class --> |
| <string name="config_wimaxManagerClassname" translatable="false"></string> |
| <!-- Name of the wimax service class --> |
| <string name="config_wimaxServiceClassname" translatable="false"></string> |
| <!-- Name of the wimax state tracker clas --> |
| <string name="config_wimaxStateTrackerClassname" translatable="false"></string> |
| |
| <!-- Specifies whether the dreams feature should be supported. |
| When true, the system will allow the user to configure dreams (screensavers) |
| to launch when a user activity timeout occurs or the system is told to nap. |
| When false, the dreams feature will be disabled (this does not affect dozing). |
| |
| Consider setting this resource to false or disabling dreams by default when a |
| doze component is specified below since dreaming will supercede dozing and |
| will prevent the system from entering a low power state until the dream ends. --> |
| <bool name="config_dreamsSupported">true</bool> |
| |
| <!-- If supported, are dreams enabled? (by default) --> |
| <bool name="config_dreamsEnabledByDefault">true</bool> |
| <!-- If supported and enabled, are dreams activated when docked? (by default) --> |
| <bool name="config_dreamsActivatedOnDockByDefault">true</bool> |
| <!-- If supported and enabled, are dreams activated when asleep and charging? (by default) --> |
| <bool name="config_dreamsActivatedOnSleepByDefault">false</bool> |
| <!-- ComponentName of the default dream (Settings.Secure.DEFAULT_SCREENSAVER_COMPONENT) --> |
| <string name="config_dreamsDefaultComponent" translatable="false">com.android.deskclock/com.android.deskclock.Screensaver</string> |
| <!-- ComponentNames of the dreams that we should hide --> |
| <string-array name="config_disabledDreamComponents" translatable="false"> |
| </string-array> |
| <!-- The list of supported dream complications --> |
| <integer-array name="config_supportedDreamComplications"> |
| </integer-array> |
| <!-- The list of dream complications which should be enabled by default --> |
| <integer-array name="config_dreamComplicationsEnabledByDefault"> |
| </integer-array> |
| |
| <!-- Are we allowed to dream while not plugged in? --> |
| <bool name="config_dreamsEnabledOnBattery">false</bool> |
| <!-- Minimum battery level to allow dreaming when powered. |
| Use -1 to disable this safety feature. --> |
| <integer name="config_dreamsBatteryLevelMinimumWhenPowered">-1</integer> |
| <!-- Minimum battery level to allow dreaming when not powered. |
| Use -1 to disable this safety feature. --> |
| <integer name="config_dreamsBatteryLevelMinimumWhenNotPowered">15</integer> |
| <!-- If the battery level drops by this percentage and the user activity timeout |
| has expired, then assume the device is receiving insufficient current to charge |
| effectively and terminate the dream. Use -1 to disable this safety feature. --> |
| <integer name="config_dreamsBatteryLevelDrainCutoff">5</integer> |
| <!-- Limit of how long the device can remain unlocked due to attention checking. --> |
| <integer name="config_attentionMaximumExtension">900000</integer> <!-- 15 minutes. --> |
| <!-- Is the system user the only user allowed to dream. --> |
| <bool name="config_dreamsOnlyEnabledForSystemUser">false</bool> |
| |
| <!-- Whether to dismiss the active dream when an activity is started. Doesn't apply to |
| assistant activities (ACTIVITY_TYPE_ASSISTANT) --> |
| <bool name="config_dismissDreamOnActivityStart">true</bool> |
| |
| <!-- The prefix of dream component names that are loggable. If empty, logs "other" for all. --> |
| <string name="config_loggable_dream_prefix" translatable="false"></string> |
| |
| <!-- ComponentName of a dream to show whenever the system would otherwise have |
| gone to sleep. When the PowerManager is asked to go to sleep, it will instead |
| try to start this dream if possible. The dream should typically call startDozing() |
| to put the display into a low power state and allow the application processor |
| to be suspended. When the dream ends, the system will go to sleep as usual. |
| Specify the component name or an empty string if none. |
| |
| Note that doze dreams are not subject to the same start conditions as ordinary dreams. |
| Doze dreams will run whenever the power manager is in a dozing state. --> |
| <string name="config_dozeComponent" translatable="false"></string> |
| |
| <!-- If true, the doze component is not started until after the screen has been |
| turned off and the screen off animation has been performed. --> |
| <bool name="config_dozeAfterScreenOffByDefault">false</bool> |
| |
| <!-- Doze: should the TYPE_PICK_UP_GESTURE sensor be used as a pulse signal. --> |
| <bool name="config_dozePulsePickup">false</bool> |
| |
| <!-- Type of the double tap sensor. Empty if double tap is not supported. --> |
| <string name="config_dozeDoubleTapSensorType" translatable="false"></string> |
| |
| <!-- Type of the tap sensor. Empty if tap is not supported. --> |
| <string name="config_dozeTapSensorType" translatable="false"></string> |
| |
| <!-- Type of the ambient tap sensor per device posture (defined by WM Jetpack posture). |
| Unspecified values use config_dozeTapSensor --> |
| <string-array name="config_dozeTapSensorPostureMapping" translatable="false"> |
| </string-array> |
| |
| <!-- Type of the long press sensor. Empty if long press is not supported. --> |
| <string name="config_dozeLongPressSensorType" translatable="false"></string> |
| |
| <!-- Type of the udfps long press sensor. Empty if long press is not supported. --> |
| <string name="config_dozeUdfpsLongPressSensorType" translatable="false"></string> |
| |
| <!-- If the sensor that wakes up the lock screen is available or not. --> |
| <bool name="config_dozeWakeLockScreenSensorAvailable">false</bool> |
| <integer name="config_dozeWakeLockScreenDebounce">300</integer> |
| |
| <!-- Type of the quick pickup sensor. Empty if quick pickup is not supported. --> |
| <string name="config_quickPickupSensorType" translatable="false"></string> |
| |
| <!-- Control whether the always on display mode is available. This should only be enabled on |
| devices where the display has been tuned to be power efficient in DOZE and/or DOZE_SUSPEND |
| states. --> |
| <bool name="config_dozeAlwaysOnDisplayAvailable">false</bool> |
| |
| <!-- Control whether the always on display mode is enabled by default. This value will be used |
| during initialization when the setting is still null. --> |
| <bool name="config_dozeAlwaysOnEnabled">true</bool> |
| |
| <!-- If AOD can show an ambient version of the wallpaper --> |
| <bool name="config_dozeSupportsAodWallpaper">true</bool> |
| |
| <!-- Whether the display blanks itself when transitioning from a doze to a non-doze state --> |
| <bool name="config_displayBlanksAfterDoze">false</bool> |
| |
| <!-- True if the display hardware only has brightness buckets rather than a full range of |
| backlight values --> |
| <bool name="config_displayBrightnessBucketsInDoze">false</bool> |
| |
| <!-- Power Management: Specifies whether to decouple the auto-suspend state of the |
| device from the display on/off state. |
| |
| When false, autosuspend_disable() will be called before the display is turned on |
| and autosuspend_enable() will be called after the display is turned off. |
| This mode provides best compatibility for devices using legacy power management |
| features such as early suspend / late resume. |
| |
| When true, autosuspend_display() and autosuspend_enable() will be called |
| independently of whether the display is being turned on or off. This mode |
| enables the power manager to suspend the application processor while the |
| display is on. |
| |
| This resource should be set to "true" when a doze component has been specified |
| to maximize power savings but not all devices support it. |
| |
| Refer to autosuspend.h for details. |
| --> |
| <bool name="config_powerDecoupleAutoSuspendModeFromDisplay">false</bool> |
| |
| <!-- Power Management: Specifies whether to decouple the interactive state of the |
| device from the display on/off state. |
| |
| When false, setInteractive(..., true) will be called before the display is turned on |
| and setInteractive(..., false) will be called after the display is turned off. |
| This mode provides best compatibility for devices that expect the interactive |
| state to be tied to the display state. |
| |
| When true, setInteractive(...) will be called independently of whether the display |
| is being turned on or off. This mode enables the power manager to reduce |
| clocks and disable the touch controller while the display is on. |
| |
| This resource should be set to "true" when a doze component has been specified |
| to maximize power savings but not all devices support it. |
| |
| Refer to power.h for details. |
| --> |
| <bool name="config_powerDecoupleInteractiveModeFromDisplay">false</bool> |
| |
| <!-- User activity timeout: Minimum screen off timeout in milliseconds. |
| |
| Sets a lower bound for the {@link Settings.System#SCREEN_OFF_TIMEOUT} setting |
| which determines how soon the device will go to sleep when there is no |
| user activity. |
| |
| This value must be greater than zero, otherwise the device will immediately |
| fall asleep again as soon as it is awoken. |
| --> |
| <integer name="config_minimumScreenOffTimeout">10000</integer> |
| |
| <!-- User activity timeout: Maximum screen dim duration in milliseconds. |
| |
| Sets an upper bound for how long the screen will dim before the device goes |
| to sleep when there is no user activity. The dim duration is subtracted from |
| the overall screen off timeout to determine the screen dim timeout. |
| When the screen dim timeout expires, the screen will dim, shortly thereafter |
| the device will go to sleep. |
| |
| If the screen off timeout is very short, the dim duration may be reduced |
| proportionally. See config_maximumScreenDimRatio. |
| |
| This value may be zero in which case the screen will not dim before the |
| device goes to sleep. |
| --> |
| <integer name="config_maximumScreenDimDuration">7000</integer> |
| |
| <!-- User activity timeout: Maximum screen dim duration as a percentage of screen off timeout. |
| |
| This resource is similar to config_maximumScreenDimDuration but the maximum |
| screen dim duration is defined as a ratio of the overall screen off timeout |
| instead of as an absolute value in milliseconds. This is useful for reducing |
| the dim duration when the screen off timeout is very short. |
| |
| When computing the screen dim duration, the power manager uses the lesser |
| of the effective durations expressed by config_maximumScreenDimDuration and |
| config_maximumScreenDimRatio. |
| |
| This value must be between 0% and 100%. If the value is zero, the screen will not |
| dim before the device goes to sleep. |
| --> |
| <fraction name="config_maximumScreenDimRatio">20%</fraction> |
| |
| <!-- Minimum size of the scrollbar thumb's touch target. --> |
| <dimen name="config_minScrollbarTouchTarget">48dp</dimen> |
| |
| <!-- Base "touch slop" value used by ViewConfiguration as a |
| movement threshold where scrolling should begin. --> |
| <dimen name="config_viewConfigurationTouchSlop">8dp</dimen> |
| |
| <!-- Base "hover slop" value used by ViewConfiguration as a |
| movement threshold under which hover is considered "stationary". --> |
| <dimen name="config_viewConfigurationHoverSlop">4dp</dimen> |
| |
| <!-- Multiplier for gesture thresholds when a MotionEvent classification is ambiguous. --> |
| <item name="config_ambiguousGestureMultiplier" format="float" type="dimen">2.0</item> |
| |
| <!-- Minimum velocity to initiate a fling, as measured in dips per second. --> |
| <dimen name="config_viewMinFlingVelocity">50dp</dimen> |
| |
| <!-- Maximum velocity to initiate a fling, as measured in dips per second. --> |
| <dimen name="config_viewMaxFlingVelocity">8000dp</dimen> |
| |
| <!-- Amount of time in ms the user needs to press the relevant key to bring up the |
| global actions dialog --> |
| <integer name="config_globalActionsKeyTimeout">500</integer> |
| |
| <!-- Amount of time in ms the user needs to press the relevant keys to trigger the |
| screenshot chord --> |
| <integer name="config_screenshotChordKeyTimeout">0</integer> |
| |
| <!-- Default width of a vertical scrollbar and height of a horizontal scrollbar. |
| Takes effect only if the scrollbar drawables have no intrinsic size. --> |
| <dimen name="config_scrollbarSize">4dp</dimen> |
| |
| <!-- Distance that should be scrolled, per axis value, in response to a horizontal |
| {@link MotionEvent#ACTION_SCROLL} event. --> |
| <dimen name="config_horizontalScrollFactor">64dp</dimen> |
| |
| <!-- Distance that should be scrolled, per axis value, in response to a vertical |
| {@link MotionEvent#ACTION_SCROLL} event. --> |
| <dimen name="config_verticalScrollFactor">64dp</dimen> |
| |
| <!-- Obsolete. Distance that should be scrolled, per axis value, in response to a |
| {@link MotionEvent#ACTION_SCROLL} event. --> |
| <dimen name="config_scrollFactor">64dp</dimen> |
| |
| <!-- Maximum number of grid columns permitted in the ResolverActivity |
| used for picking activities to handle an intent. --> |
| <integer name="config_maxResolverActivityColumns">3</integer> |
| |
| <!-- Array of OEM specific USB mode override config. |
| OEM can override a certain USB mode depending on ro.bootmode. |
| Specify an array of below items to set override rule. |
| [bootmode]:[original USB mode]:[USB mode used]--> |
| <integer-array translatable="false" name="config_oemUsbModeOverride"> |
| </integer-array> |
| |
| <!-- Set to true to add links to Cell Broadcast app from Settings and MMS app. --> |
| <bool name="config_cellBroadcastAppLinks">true</bool> |
| |
| <!-- The default value if the SyncStorageEngine should sync automatically or not --> |
| <bool name="config_syncstorageengine_masterSyncAutomatically">true</bool> |
| |
| <!-- Maximum number of supported users --> |
| <integer name="config_multiuserMaximumUsers">1</integer> |
| |
| <!-- Maximum number of users we allow to be running at a time --> |
| <integer name="config_multiuserMaxRunningUsers">3</integer> |
| |
| <!-- Whether to delay user data locking for background user. |
| If false, user switched-out from user switching will still be in running state until |
| config_multiuserMaxRunningUsers is reached. Once config_multiuserMaxRunningUsers is |
| reached, user will be stopped and user data is locked. |
| If true, user switched out from user switching will always be stopped but its user data |
| is not locked. Total number of unlocked users will be limited by |
| config_multiuserMaxRunningUsers. Once that limit is reached, least recently stopped user |
| will be locked. --> |
| <bool name="config_multiuserDelayUserDataLocking">false</bool> |
| |
| <!-- Whether to automatically switch a non-primary user back to the primary user after a |
| timeout when the device is docked. --> |
| <bool name="config_enableTimeoutToUserZeroWhenDocked">false</bool> |
| |
| <!-- Whether to only install system packages on a user if they're allowlisted for that user |
| type. These are flags and can be freely combined. |
| 0 - disable allowlist (install all system packages; no logging) |
| 1 - enforce (only install system packages if they are allowlisted) |
| 2 - log (log non-allowlisted packages) |
| 4 - any package not mentioned in the allowlist file is implicitly allowlisted on all users |
| 8 - same as 4, but just for the SYSTEM user |
| 16 - ignore OTAs (don't install system packages during OTAs) |
| Common scenarios: |
| - to enable feature (fully enforced) for a complete allowlist: 1 |
| - to enable feature for an incomplete allowlist (so use implicit allowlist mode): 5 |
| - to enable feature but implicitly allowlist for SYSTEM user to ease local development: 9 |
| - to disable feature completely if it had never been enabled: 16 |
| - to henceforth disable feature and try to undo its previous effects: 0 |
| Note: This list must be kept current with PACKAGE_WHITELIST_MODE_PROP in |
| frameworks/base/services/core/java/com/android/server/pm/UserSystemPackageInstaller.java --> |
| <integer name="config_userTypePackageWhitelistMode">13</integer> <!-- 1+4+8 --> |
| |
| <!-- Whether UI for multi user should be shown --> |
| <bool name="config_enableMultiUserUI">false</bool> |
| |
| <!-- Whether the new Auto Selection Network UI should be shown --> |
| <bool name="config_enableNewAutoSelectNetworkUI">false</bool> |
| |
| <!-- If true, then we do not ask user for permission for apps to connect to USB devices. |
| Do not set this to true for production devices. Doing so will cause you to fail CTS. --> |
| <bool name="config_disableUsbPermissionDialogs">false</bool> |
| |
| <!-- Activity to handle Usb Device connection in USB Host side. Keeping it to null value will |
| lead into handling it inside system using Intent resolution. Non-null contents will have |
| format of package-name/ActivityClassName. --> |
| <string name="config_UsbDeviceConnectionHandling_component" translatable="false">@null</string> |
| |
| <!-- Minimum span needed to begin a touch scaling gesture. |
| If the span is equal to or greater than this size, a scaling gesture |
| will begin, where supported. (See android.view.ScaleGestureDetector) |
| |
| This also takes into account the size of any active touch points. |
| Devices with screens that deviate too far from their assigned density |
| bucket should consider tuning this value in a device-specific overlay. |
| For best results, care should be taken such that this value remains |
| larger than the minimum reported touchMajor/touchMinor values |
| reported by the hardware. --> |
| <dimen name="config_minScalingSpan">27mm</dimen> |
| |
| <!-- Minimum accepted value for touchMajor while scaling. This may be tuned |
| per-device in overlays. --> |
| <dimen name="config_minScalingTouchMajor">48dp</dimen> |
| |
| <!-- Safe headphone volume index. When music stream volume is below this index |
| the SPL on headphone output is compliant to EN 60950 requirements for portable music |
| players. --> |
| <integer name="config_safe_media_volume_index">10</integer> |
| |
| <!-- Safe USB headset gain. This value is used to ensure that the SPL on the USB |
| headset output is compliant to EN 60950 requirements for portable music players. --> |
| <integer name="config_safe_media_volume_usb_mB">-3700</integer> |
| |
| <!-- Configure mobile network MTU. The standard default is set here but each carrier |
| may have a specific value set in an overlay config.xml file. --> |
| <integer name="config_mobile_mtu">1500</integer> |
| |
| <!-- Configure mobile tcp buffer sizes in the form: |
| rat-name:rmem_min,rmem_def,rmem_max,wmem_min,wmem_def,wmem_max |
| If no value is found for the rat-name in use, the system default will be applied. |
| |
| This is deprecated. Please use config_mobile_tcp_buffers for rat-based TCP buffers sizes or |
| config_tcp_buffers for rat-independent TCP buffer sizes. |
| --> |
| <string-array name="config_mobile_tcp_buffers"> |
| </string-array> |
| |
| <!-- Configure ethernet tcp buffersizes in the form: |
| rmem_min,rmem_def,rmem_max,wmem_min,wmem_def,wmem_max --> |
| <string name="config_ethernet_tcp_buffers" translatable="false">524288,1048576,3145728,524288,1048576,2097152</string> |
| |
| <!-- Whether WiFi display is supported by this device. |
| There are many prerequisites for this feature to work correctly. |
| Here are a few of them: |
| * The WiFi radio must support WiFi P2P. |
| * The WiFi radio must support concurrent connections to the WiFi display and |
| to an access point. |
| * The Audio Server audio_policy_configuration.xml file must specify a rule for |
| the "r_submix" remote submix module. This module is used to record and stream system |
| audio output to the WiFi display encoder in the media server. |
| * The remote submix module "audio.r_submix.default" must be installed on the device. |
| * The device must be provisioned with HDCP keys (for protected content). |
| --> |
| <bool name="config_enableWifiDisplay">false</bool> |
| |
| <!-- When true, local displays that do not contain any of their own content will automatically |
| mirror the content of the default display. --> |
| <bool name="config_localDisplaysMirrorContent">true</bool> |
| |
| <!-- Controls if local secondary displays should be private or not. Value specified in the array |
| represents physical port address of each display and display in this list will be marked |
| as private. {@see android.view.Display#FLAG_PRIVATE} --> |
| <integer-array translatable="false" name="config_localPrivateDisplayPorts"></integer-array> |
| |
| <!-- The default mode for the default display. One of the following values (See Display.java): |
| 0 - COLOR_MODE_DEFAULT |
| 7 - COLOR_MODE_SRGB |
| --> |
| <integer name="config_defaultDisplayDefaultColorMode">0</integer> |
| |
| <!-- When true use the linux /dev/input/event subsystem to detect the switch changes |
| on the headphone/microphone jack. When false use the older uevent framework. --> |
| <bool name="config_useDevInputEventForAudioJack">false</bool> |
| |
| <!-- Whether safe headphone volume is enabled or not (country specific). --> |
| <bool name="config_safe_media_volume_enabled">true</bool> |
| |
| <!-- Whether safe headphone volume warning dialog is disabled on Vol+ (operator specific). --> |
| <bool name="config_safe_media_disable_on_volume_up">true</bool> |
| |
| <!-- Set to true if the wifi display supports compositing content stored |
| in gralloc protected buffers. For this to be true, there must exist |
| a protected hardware path for surface flinger to composite and send |
| protected buffers to the wifi display video encoder. |
| |
| If this flag is false, we advise applications not to use protected |
| buffers (if possible) when presenting content to a wifi display because |
| the content may be blanked. |
| |
| This flag controls whether the {@link Display#FLAG_SUPPORTS_PROTECTED_BUFFERS} |
| flag is set for wifi displays. |
| --> |
| <bool name="config_wifiDisplaySupportsProtectedBuffers">false</bool> |
| |
| <!-- Whether camera shutter sound is forced or not (country specific). --> |
| <bool name="config_camera_sound_forced">false</bool> |
| |
| <!-- Set to true if we need to not prefer an APN. |
| This is being added to enable a simple scenario of pre-paid |
| provisioning on some carriers, working around a bug (7305641) |
| where if the preferred is used we don't try the others. --> |
| <bool name="config_dontPreferApn">false</bool> |
| |
| <!-- Set to true if after a provisioning apn the radio should be restarted --> |
| <bool name="config_restartRadioAfterProvisioning">false</bool> |
| |
| <!-- Vibrator pattern to be used as the default for notifications |
| that specify DEFAULT_VIBRATE. |
| --> |
| <integer-array name="config_defaultNotificationVibePattern"> |
| <item>0</item> |
| <item>350</item> |
| <item>250</item> |
| <item>350</item> |
| </integer-array> |
| |
| <!-- A vibration waveform for notifications that specify DEFAULT_VIBRATE. |
| This value is a float array with values grouped as |
| { targetAmplitude (within [0,1]), targetFrequency (in hertz), duration (in milliseconds) } |
| This is only applied on devices with vibration frequency control. If the device doesn't |
| support frequency control, then the vibration specified in |
| config_defaultNotificationVibePattern is used instead. |
| --> |
| <array name="config_defaultNotificationVibeWaveform"> |
| </array> |
| |
| <!-- Vibrator pattern to be used as the default for notifications |
| that do not specify vibration but vibrate anyway because the device |
| is in vibrate mode. |
| --> |
| <integer-array name="config_notificationFallbackVibePattern"> |
| <item>0</item> |
| <item>100</item> |
| <item>150</item> |
| <item>100</item> |
| </integer-array> |
| |
| <!-- A vibration waveform for notifications that do not specify vibration but vibrate anyway, |
| because the device is in vibrate mode. This value is a float array with values grouped as |
| { targetAmplitude (within [0,1]), targetFrequency (in hertz), duration (in milliseconds) } |
| This is only applied on devices with vibration frequency control. If the device doesn't |
| support frequency control, then the vibration specified in |
| config_notificationFallbackVibePattern is used instead. |
| --> |
| <array name="config_notificationFallbackVibeWaveform"> |
| </array> |
| |
| <!-- Flag indicating if the speed up audio on mt call code should be executed --> |
| <bool name="config_speed_up_audio_on_mt_calls">false</bool> |
| |
| <!-- Class name of the framework account picker activity. |
| Can be customized for other product types --> |
| <string name="config_chooseAccountActivity" translatable="false" |
| >android/android.accounts.ChooseAccountActivity</string> |
| <!-- Class name of the account type and account picker activity. |
| Can be customized for other product types --> |
| <string name="config_chooseTypeAndAccountActivity" translatable="false" |
| >android/android.accounts.ChooseTypeAndAccountActivity</string> |
| <!-- Name of the activity that will handle requests to the system to choose an activity for |
| the purposes of resolving an intent. --> |
| <string name="config_chooserActivity" translatable="false" |
| >com.android.intentresolver/.ChooserActivity</string> |
| <!-- Component name of a custom ResolverActivity (Intent resolver) to be used instead of |
| the default framework version. If left empty, then the framework version will be used. |
| Example: com.google.android.myapp/.resolver.MyResolverActivity --> |
| <string name="config_customResolverActivity" translatable="false"></string> |
| |
| <!-- Name of the activity or service that prompts the user to reject, accept, or allowlist |
| an adb host's public key, when an unwhitelisted host connects to the local adbd. |
| Can be customized for other product types --> |
| <string name="config_customAdbPublicKeyConfirmationComponent" |
| >com.android.systemui/com.android.systemui.usb.UsbDebuggingActivity</string> |
| |
| <!-- Name of the activity that prompts the secondary user to acknowledge they need to |
| switch to the primary user to enable USB debugging. |
| Can be customized for other product types --> |
| <string name="config_customAdbPublicKeyConfirmationSecondaryUserComponent" |
| >com.android.systemui/com.android.systemui.usb.UsbDebuggingSecondaryUserActivity</string> |
| |
| <!-- Name of the activity or service that prompts the user to reject, accept, or allowlist |
| a wireless network for wireless debugging. |
| Can be customized for other product types --> |
| <string name="config_customAdbWifiNetworkConfirmationComponent" |
| >com.android.systemui/com.android.systemui.wifi.WifiDebuggingActivity</string> |
| |
| <!-- Name of the activity that prompts the secondary user to acknowledge they need to |
| switch to the primary user to enable wireless debugging. |
| Can be customized for other product types --> |
| <string name="config_customAdbWifiNetworkConfirmationSecondaryUserComponent" |
| >com.android.systemui/com.android.systemui.wifi.WifiDebuggingSecondaryUserActivity</string> |
| |
| <!-- Component name of the activity that shows the usb containment status. --> |
| <string name="config_usbContaminantActivity" translatable="false" |
| >com.android.systemui/com.android.systemui.usb.UsbContaminantActivity</string> |
| |
| <!-- Component name of the activity that shows the request for access to a usb device. --> |
| <string name="config_usbPermissionActivity" translatable="false" |
| >com.android.systemui/com.android.systemui.usb.UsbPermissionActivity</string> |
| |
| <!-- Component name of the activity that shows more information about a usb accessory. --> |
| <string name="config_usbAccessoryUriActivity" translatable="false" |
| >com.android.systemui/com.android.systemui.usb.UsbAccessoryUriActivity</string> |
| |
| <!-- Component name of the activity that confirms the activity to start when a usb device is |
| plugged in. --> |
| <string name="config_usbConfirmActivity" translatable="false" |
| >com.android.systemui/com.android.systemui.usb.UsbConfirmActivity</string> |
| |
| <!-- Component name of the activity to select the activity to start when a usb device is plugged |
| in. --> |
| <string name="config_usbResolverActivity" translatable="false" |
| >com.android.systemui/com.android.systemui.usb.UsbResolverActivity</string> |
| |
| <!-- Component name of the activity used to inform a user about a sensory being blocked because |
| of privacy settings. --> |
| <string name="config_sensorUseStartedActivity" translatable="false" |
| >com.android.systemui/com.android.systemui.sensorprivacy.SensorUseStartedActivity</string> |
| |
| <!-- Component name of the activity used to inform a user about a sensory being blocked because |
| of hardware privacy switches. --> |
| <string name="config_sensorUseStartedActivity_hwToggle" translatable="false" |
| >com.android.systemui/com.android.systemui.sensorprivacy.SensorUseStartedActivity</string> |
| |
| <!-- Component name of the activity used to ask a user to confirm system language change after |
| receiving <Set Menu Language> CEC message. --> |
| <string name="config_hdmiCecSetMenuLanguageActivity" |
| >com.android.systemui/com.android.systemui.hdmi.HdmiCecSetMenuLanguageActivity</string> |
| |
| <!-- Name of the dialog that is used to request the user's consent for a Platform VPN --> |
| <string name="config_platformVpnConfirmDialogComponent" translatable="false" |
| >com.android.vpndialogs/com.android.vpndialogs.PlatformVpnConfirmDialog</string> |
| |
| <!-- Name of the dialog that is used to request the user's consent for a VpnService VPN --> |
| <string name="config_customVpnConfirmDialogComponent" translatable="false" |
| >com.android.vpndialogs/com.android.vpndialogs.ConfirmDialog</string> |
| |
| <!-- Name of the dialog that is used to inform the user that always-on VPN is disconnected --> |
| <string name="config_customVpnAlwaysOnDisconnectedDialogComponent" translatable="false" |
| >com.android.vpndialogs/com.android.vpndialogs.AlwaysOnDisconnectedDialog</string> |
| |
| <!-- Name of the dialog that is used to install the carrier app when the SIM is inserted --> |
| <string name="config_carrierAppInstallDialogComponent" translatable="false" |
| >com.android.simappdialog/com.android.simappdialog.InstallCarrierAppActivity</string> |
| |
| <!-- Apps that are authorized to access shared accounts, overridden by product overlays --> |
| <string name="config_appsAuthorizedForSharedAccounts" translatable="false">;com.android.settings;</string> |
| |
| <!-- System settings intelligence package name --> |
| <string name="config_systemSettingsIntelligence" translatable="false"> |
| com.android.settings.intelligence |
| </string> |
| |
| <!-- System bluetooth stack package name --> |
| <string name="config_systemBluetoothStack" translatable="false"> |
| com.android.bluetooth.services |
| </string> |
| |
| <!-- Flag indicating that the media framework should not allow changes or mute on any |
| stream or global volumes. --> |
| <bool name="config_useFixedVolume">false</bool> |
| |
| <!-- The list of IMEs which should be disabled until used. |
| This function suppresses update notifications for these pre-installed apps. |
| We need to set this configuration carefully that they should not have functionarities |
| other than "IME" or "Spell Checker". In InputMethodManagerService, |
| the listed IMEs are disabled until used when all of the following conditions are met. |
| 1. Not selected as an enabled IME in the Settings |
| 2. Not selected as a spell checker in the Settings |
| 3. Installed |
| 4. A pre-installed IME |
| 5. Not enabled |
| And the disabled_until_used state for an IME is released by InputMethodManagerService |
| when the IME is selected as an enabled IME. --> |
| <string-array name="config_disabledUntilUsedPreinstalledImes" translatable="false"> |
| <item>com.android.inputmethod.latin</item> |
| </string-array> |
| |
| <!-- Make the IME killable by the lowmemorykiller by raising its oom_score_adj. --> |
| <bool name="config_killableInputMethods">false</bool> |
| |
| <!-- Prevent the InputMethodManagerService from starting up the IME unless |
| the currently focused view is a text editor. --> |
| <bool name="config_preventImeStartupUnlessTextEditor">false</bool> |
| |
| <!-- These IMEs are known not to behave well when evicted from memory and thus are exempt |
| from the IME startup prevention behavior that is enabled by |
| config_preventImeStartupUnlessTextEditor. --> |
| <string-array name="config_nonPreemptibleInputMethods" translatable="false" /> |
| |
| <!-- Flag indicating that enhanced confirmation mode is enabled. --> |
| <bool name="config_enhancedConfirmationModeEnabled">true</bool> |
| |
| <!-- The list of classes that should be added to the notification ranking pipeline. |
| See {@link com.android.server.notification.NotificationSignalExtractor} |
| If you add a new extractor to this list make sure to update |
| NotificationManagerService.handleRankingSort()--> |
| <string-array name="config_notificationSignalExtractors"> |
| <!-- many of the following extractors depend on the notification channel, so this |
| extractor must come first --> |
| <item>com.android.server.notification.NotificationChannelExtractor</item> |
| <item>com.android.server.notification.NotificationAdjustmentExtractor</item> |
| <item>com.android.server.notification.BubbleExtractor</item> |
| <!-- depends on AdjustmentExtractor--> |
| <item>com.android.server.notification.ValidateNotificationPeople</item> |
| <item>com.android.server.notification.PriorityExtractor</item> |
| <!-- depends on PriorityExtractor --> |
| <item>com.android.server.notification.ZenModeExtractor</item> |
| <item>com.android.server.notification.ImportanceExtractor</item> |
| <!-- depends on ImportanceExtractor--> |
| <item>com.android.server.notification.NotificationIntrusivenessExtractor</item> |
| <item>com.android.server.notification.VisibilityExtractor</item> |
| <!-- Depends on ZenModeExtractor --> |
| <item>com.android.server.notification.BadgeExtractor</item> |
| <item>com.android.server.notification.CriticalNotificationExtractor</item> |
| |
| </string-array> |
| |
| <!-- Default Gravity setting for the system Toast view. Equivalent to: Gravity.CENTER_HORIZONTAL | Gravity.BOTTOM --> |
| <integer name="config_toastDefaultGravity">0x00000051</integer> |
| |
| <!-- set to false if we need to show user confirmation |
| when alpha identifier is not provided by the UICC --> |
| <bool name="config_stkNoAlphaUsrCnf">true</bool> |
| |
| <!-- Threshold (in ms) under which a screen off / screen on will be considered a reset of the |
| immersive mode confirmation prompt.--> |
| <integer name="config_immersive_mode_confirmation_panic">5000</integer> |
| |
| <!-- For some operators, PDU has garbages. To fix it, need to use valid index --> |
| <integer name="config_valid_wappush_index">-1</integer> |
| |
| <!-- call barring MMI code from TS 22.030 Annex B --> |
| <string-array translatable="false" name="config_callBarringMMI"> |
| <item>33</item> |
| <item>331</item> |
| <item>332</item> |
| <item>35</item> |
| <item>351</item> |
| <item>330</item> |
| <item>333</item> |
| <item>353</item> |
| </string-array> |
| |
| <!-- Ims supported call barring MMI code --> |
| <string-array translatable="false" name="config_callBarringMMI_for_ims"> |
| <item>33</item> |
| <item>331</item> |
| <item>332</item> |
| <item>35</item> |
| <item>351</item> |
| <item>330</item> |
| <item>333</item> |
| <item>353</item> |
| </string-array> |
| |
| <!-- Override the default detection behavior for the framework method |
| android.view.ViewConfiguration#hasPermanentMenuKey(). |
| Valid settings are: |
| 0 - No change. Use the default autodetection behavior. |
| 1 - The device DOES have a permanent menu key; ignore autodetection. |
| 2 - The device DOES NOT have a permanent menu key; ignore autodetection. --> |
| <integer name="config_overrideHasPermanentMenuKey">0</integer> |
| |
| <!-- Override the DPad detection behavior for configuration purposes --> |
| <bool name="config_hasPermanentDpad">false</bool> |
| |
| <!-- default window inset isRound property --> |
| <bool name="config_windowIsRound">false</bool> |
| |
| <!-- Override this value if the device has a chin, i.e. area that is not actual part of the |
| screen but you would like to be treated as a real display. The value is the height of the |
| chin. --> |
| <integer name="config_windowOutsetBottom">0</integer> |
| |
| <!-- Package name for default network scorer app; overridden by product overlays. --> |
| <string name="config_defaultNetworkScorerPackageName"></string> |
| |
| <!-- The amount to scale fullscreen snapshots for Overview and snapshot starting windows. --> |
| <item name="config_highResTaskSnapshotScale" format="float" type="dimen">1.0</item> |
| |
| <!-- The amount to scale reduced scale snapshots for Overview and snapshot starting windows. |
| Reduced scale snapshots are loaded before full screen snapshots to improve load times and |
| minimize the chance the user will see an empty task card. If set to 0, reduced scale |
| snapshots are disabled, and snapshots will only be stored at config_highResTaskSnapshotScale |
| --> |
| <item name="config_lowResTaskSnapshotScale" format="float" type="dimen">0.5</item> |
| |
| <!-- Feature flag to store TaskSnapshot in 16 bit pixel format to save memory. --> |
| <bool name="config_use16BitTaskSnapshotPixelFormat">false</bool> |
| |
| <!-- Determines whether recent tasks are provided to the user. Default device has recents |
| property. If this is false, then the following recents config flags are ignored. --> |
| <bool name="config_hasRecents">true</bool> |
| |
| <!-- Component name for the activity that will be presenting the Recents UI, which will receive |
| special permissions for API related to fetching and presenting recent tasks. The default |
| configuration uses Launcehr3QuickStep as default launcher and points to the corresponding |
| recents component. When using a different default launcher, change this appropriately or |
| use the default systemui implementation: com.android.systemui/.recents.RecentsActivity --> |
| <string name="config_recentsComponentName" translatable="false" |
| >com.android.launcher3/com.android.quickstep.RecentsActivity</string> |
| |
| <!-- SystemUi service component --> |
| <string name="config_systemUIServiceComponent" translatable="false" |
| >com.android.systemui/com.android.systemui.SystemUIService</string> |
| |
| <!-- Package handling Quick controls --> |
| <string name="config_controlsPackage" translatable="false" |
| >com.android.systemui</string> |
| |
| <!-- Keyguard component --> |
| <string name="config_keyguardComponent" translatable="false" |
| >com.android.systemui/com.android.systemui.keyguard.KeyguardService</string> |
| |
| <!-- Screen record dialog component --> |
| <string name="config_screenRecorderComponent" translatable="false" |
| >com.android.systemui/com.android.systemui.screenrecord.ScreenRecordDialog</string> |
| |
| <!-- The component name of a special dock app that merely launches a dream. |
| We don't want to launch this app when docked because it causes an unnecessary |
| activity transition. We just want to start the dream. --> |
| <string name="config_somnambulatorComponent" translatable="false" |
| >com.android.systemui/com.android.systemui.Somnambulator</string> |
| |
| <!-- The component name of a special dock app that merely launches a dream. |
| We don't want to launch this app when docked because it causes an unnecessary |
| activity transition. We just want to start the dream.. --> |
| <string name="config_screenshotServiceComponent" translatable="false" |
| >com.android.systemui/com.android.systemui.screenshot.TakeScreenshotService</string> |
| |
| <!-- The component notified when there is an error while taking a screenshot. --> |
| <string name="config_screenshotErrorReceiverComponent" translatable="false" |
| >com.android.systemui/com.android.systemui.screenshot.ScreenshotServiceErrorReceiver</string> |
| |
| <!-- The component for the activity shown to grant permissions for a slice. --> |
| <string name="config_slicePermissionComponent" translatable="false" |
| >com.android.systemui/com.android.systemui.SlicePermissionActivity</string> |
| |
| <!-- The minimum number of visible recent tasks to be presented to the user through the |
| SystemUI. Can be -1 if there is no minimum limit. --> |
| <integer name="config_minNumVisibleRecentTasks_grid">-1</integer> |
| |
| <!-- The maximum number of visible recent tasks to be presented to the user through the |
| SystemUI. Can be -1 if there is no maximum limit. --> |
| <integer name="config_maxNumVisibleRecentTasks_grid">9</integer> |
| |
| <!-- The minimum number of visible recent tasks to be presented to the user through the |
| SystemUI. Can be -1 if there is no minimum limit. --> |
| <integer name="config_minNumVisibleRecentTasks_lowRam">-1</integer> |
| |
| <!-- The maximum number of visible recent tasks to be presented to the user through the |
| SystemUI. Can be -1 if there is no maximum limit. --> |
| <integer name="config_maxNumVisibleRecentTasks_lowRam">9</integer> |
| |
| <!-- The minimum number of visible recent tasks to be presented to the user through the |
| SystemUI. Can be -1 if there is no minimum limit. --> |
| <integer name="config_minNumVisibleRecentTasks">5</integer> |
| |
| <!-- The maximum number of visible recent tasks to be presented to the user through the |
| SystemUI. Can be -1 if there is no maximum limit. --> |
| <integer name="config_maxNumVisibleRecentTasks">-1</integer> |
| |
| <!-- The duration in which a recent task is considered in session and should be visible. --> |
| <integer name="config_activeTaskDurationHours">6</integer> |
| |
| <!-- default window ShowCircularMask property --> |
| <bool name="config_windowShowCircularMask">false</bool> |
| |
| <!-- default value for whether circular emulators (ro.emulator.circular) |
| should show a display overlay on the screen --> |
| <bool name="config_windowEnableCircularEmulatorDisplayOverlay">false</bool> |
| |
| <!-- Defines the default set of global actions. Actions may still be disabled or hidden based |
| on the current state of the device. |
| Each item must be one of the following strings: |
| "power" = Power off |
| "settings" = An action to launch settings |
| "airplane" = Airplane mode toggle |
| "bugreport" = Take bug report, if available |
| "silent" = silent mode |
| "users" = list of users |
| "restart" = restart device |
| "emergency" = Launch emergency dialer |
| "lockdown" = Lock down device until the user authenticates |
| "logout" = Logout the current user |
| --> |
| <string-array translatable="false" name="config_globalActionsList"> |
| <item>emergency</item> |
| <item>lockdown</item> |
| <item>power</item> |
| <item>restart</item> |
| <item>logout</item> |
| <item>screenshot</item> |
| <item>bugreport</item> |
| </string-array> |
| |
| <!-- Number of milliseconds to hold a wake lock to ensure that drawing is fully |
| flushed to the display while dozing. This value needs to be large enough |
| to account for processing and rendering time plus a frame or two of latency |
| in the display pipeline plus some slack just to be sure. --> |
| <integer name="config_drawLockTimeoutMillis">120</integer> |
| |
| <!-- An array of device capabilities defined by GSMA SGP.22 v2.0. |
| The first item is the capability name that the device supports. The second item is the |
| major version. The minor and revision versions are default to 0s. |
| The device capabilities and their definition in the spec are: |
| gsm : gsmSupportedRelease |
| utran : utranSupportedRelease |
| cdma1x : cdma2000onexSupportedRelease |
| hrpd : cdma2000hrpdSupportedRelease |
| ehrpd : cdma2000ehrpdSupportedRelease |
| eutran : eutranSupportedRelease |
| nfc : contactlessSupportedRelease |
| crl : rspCrlSupportedVersion |
| nrepc : nrEpcSupportedRelease |
| nr5gc : nr5gcSupportedRelease |
| eutran5gc : eutran5gcSupportedRelease |
| --> |
| <string-array translatable="false" name="config_telephonyEuiccDeviceCapabilities"> |
| <!-- Example: |
| <item>"gsm,11"</item> |
| <item>"utran,11"</item> |
| <item>"cdma1x,1"</item> |
| <item>"hrpd,3"</item> |
| <item>"ehrpd,12"</item> |
| <item>"eutran,11"</item> |
| <item>"nfc,1"</item> |
| <item>"crl,1"</item> |
| <item>"nrepc,15"</item> |
| <item>"nr5gc,15"</item> |
| <item>"eutran5gc,15"</item> |
| --> |
| </string-array> |
| |
| <!-- default telephony hardware configuration for this platform. |
| --> |
| <!-- this string array should be overridden by the device to present a list |
| telephony hardware resource. this is used by the telephony device controller |
| (TDC) to offer the basic capabilities of the hardware to the telephony |
| framework |
| --> |
| <!-- an array of "[hardware type],[hardware-uuid],[state],[[hardware-type specific]]" |
| with, [[hardware-type specific]] in: |
| - "[[ril-model],[rat],[max-active-voice],[max-active-data],[max-active-standby]]" |
| for 'modem' hardware |
| - "[[associated-modem-uuid]]" |
| for 'sim' hardware. |
| refer to HardwareConfig in com.android.internal.telephony for specific details/values |
| those elements can carry. |
| --> |
| <string-array translatable="false" name="config_telephonyHardware"> |
| <!-- modem --> |
| <item>0,modem,0,0,0,1,1,1</item> |
| <!-- sim --> |
| <item>1,sim,0,modem</item> |
| </string-array> |
| |
| <!-- This string array can be overriden to add an additional DRM support for WebView EME. --> |
| <!-- Array of "[keySystemName],[UuidOfMediaDrm]" --> |
| <string-array name="config_keySystemUuidMapping" translatable="false"> |
| <!-- Example: |
| <item>"x-com.microsoft.playready,9A04F079-9840-4286-AB92-E65BE0885F95"</item> |
| --> |
| </string-array> |
| |
| <!-- Flag indicating which package name can access the persistent data partition --> |
| <string name="config_persistentDataPackageName" translatable="false"></string> |
| |
| <!-- Flag indicating which package name can access DeviceConfig table --> |
| <string name="config_deviceConfiguratorPackageName" translatable="false"></string> |
| |
| <!-- Flag indicating apps will skip sending hold request before merge. In this case |
| IMS service implementation will do both.i.e.hold followed by merge. --> |
| <bool name="skipHoldBeforeMerge">true</bool> |
| |
| <!-- Flag indicating whether the IMS service can be turned off. If false then |
| the service will not be turned-off completely (the ImsManager.turnOffIms() will |
| be disabled) but individual Features can be disabled using ImsConfig.setFeatureValue() --> |
| <bool name="imsServiceAllowTurnOff">true</bool> |
| |
| <!-- Flag specifying whether VoLTE is available on device --> |
| <bool name="config_device_volte_available">false</bool> |
| |
| <!-- Flag specifying whether VoLTE should be available for carrier: independent of |
| carrier provisioning. If false: hard disabled. If true: then depends on carrier |
| provisioning, availability etc --> |
| <bool name="config_carrier_volte_available">false</bool> |
| |
| <!-- Flag specifying whether VoLTE TTY is supported --> |
| <bool name="config_carrier_volte_tty_supported">true</bool> |
| |
| <!-- Flag specifying whether VT is available on device --> |
| <bool name="config_device_vt_available">false</bool> |
| |
| <!-- Flag specifying whether the device will use the "allow_hold_in_ims_call" carrier config |
| option. When false, the device will support holding of IMS calls, regardless of the |
| carrier config setting. --> |
| <bool name="config_device_respects_hold_carrier_config">true</bool> |
| |
| <!-- Flag specifying whether VT should be available for carrier: independent of |
| carrier provisioning. If false: hard disabled. If true: then depends on carrier |
| provisioning, availability etc --> |
| <bool name="config_carrier_vt_available">false</bool> |
| |
| <!-- Flag specifying whether WFC over IMS is available on device --> |
| <bool name="config_device_wfc_ims_available">false</bool> |
| |
| <!-- Flag specifying whether WFC over IMS should be available for carrier: independent of |
| carrier provisioning. If false: hard disabled. If true: then depends on carrier |
| provisioning, availability etc --> |
| <bool name="config_carrier_wfc_ims_available">false</bool> |
| |
| <!-- Whether to use voip audio mode for ims call --> |
| <bool name="config_use_voip_mode_for_ims">false</bool> |
| |
| <!-- Boolean indicating USSD over IMS is allowed. |
| If it is not supported due to modem limitations, USSD send over the CS pipe instead.--> |
| <bool name="config_allow_ussd_over_ims">false</bool> |
| |
| <!-- String array containing numbers that shouldn't be logged. Country-specific. --> |
| <string-array name="unloggable_phone_numbers" /> |
| |
| <bool name="config_networkSamplingWakesDevice">true</bool> |
| |
| <!--From SmsMessage--> |
| <!--Support decoding the user data payload as pack GSM 8-bit (a GSM alphabet |
| string that's stored in 8-bit unpacked format) characters.--> |
| <bool translatable="false" name="config_sms_decode_gsm_8bit_data">false</bool> |
| |
| <!-- Configures encoding type to parse the User Data of an SMS for reserved TP-DCS value. |
| Refer to SmsConstants.java |
| ENCODING_UNKNOWN = 0; |
| ENCODING_7BIT = 1; |
| ENCODING_8BIT = 2; |
| ENCODING_16BIT = 3; |
| ENCODING_KSC5601 = 4; |
| --> |
| <integer name="default_reserved_data_coding_scheme">2</integer> |
| |
| <!-- If EMS is not supported, framework breaks down EMS into single segment SMS |
| and adds page info " x/y". This config is used to set which carrier doesn't |
| support EMS and whether page info should be added at the beginning or the end. |
| We use tag 'prefix' for position beginning and 'suffix' for position end. |
| And use gid to distinguish different carriers which using same mcc and mnc. |
| Examples: <item>simOperatorNumber;position;gid(optional)</item>> |
| --> |
| <string-array translatable="false" name="no_ems_support_sim_operators"> |
| <!-- VZW --> |
| <item>20404;suffix;BAE0000000000000</item> |
| </string-array> |
| |
| <bool name="config_auto_attach_data_on_creation">true</bool> |
| |
| <!-- Sprint need a 70 ms delay for 3way call --> |
| <integer name="config_cdma_3waycall_flash_delay">0</integer> |
| |
| <!-- If there is no preload VM number in the sim card, carriers such as |
| Verizon require to load a default vm number from the configurantion. |
| Define config_default_vm_number for this purpose. And there are two |
| optional formats for this configuration as below: |
| (1)<item>voicemail number</item> |
| (2)<item>voicemail number;gid</item> |
| The logic to pick up the correct voicemail number: |
| (1) If the config_default_vm_number array has no gid special item, the last one will be |
| picked |
| (2) If the config_default_vm_number array has gid special item and it matches the current |
| sim's gid, it will be picked. |
| (3) If the config_default_vm_number array has gid special item but it doesn't match the |
| current sim's gid, the last one without gid will be picked --> |
| <string-array translatable="false" name="config_default_vm_number" /> |
| |
| <!--SIM does not save, but the voice mail number to be changed. --> |
| <bool name="editable_voicemailnumber">false</bool> |
| |
| <!-- service number convert map in roaming network. --> |
| <!-- [dialstring],[replacement][,optional gid] --> |
| <string-array translatable="false" name="dial_string_replace"> |
| </string-array> |
| |
| <!-- Flag indicating whether radio is to be restarted on the error of |
| PDP_FAIL_REGULAR_DEACTIVATION/0x24 --> |
| <bool name="config_restart_radio_on_pdp_fail_regular_deactivation">false</bool> |
| |
| <!-- networks that don't want data deactivate when shutdown the phone |
| note this is dependent on the operator of the network we're on, |
| not operator on the SIM --> |
| <string-array translatable="false" name="networks_not_clear_data"> |
| <item>71203</item> |
| <item>71606</item> |
| <item>71610</item> |
| <item>732101</item> |
| </string-array> |
| |
| <!-- Config determines whether to update phone object when voice registration |
| state changes. Voice radio tech change will always trigger an update of |
| phone object irrespective of this config --> |
| <bool name="config_switch_phone_on_voice_reg_state_change">true</bool> |
| |
| <bool name="config_sms_force_7bit_encoding">false</bool> |
| |
| <!-- Number of physical SIM slots on the device. This includes both eSIM and pSIM slots, and |
| is not necessarily the same as the number of phones/logical modems supported by the device. |
| For example, a multi-sim device can have 2 phones/logical modems, but 3 physical slots, |
| or a single SIM device can have 1 phones/logical modems, but 2 physical slots (one eSIM |
| and one pSIM) --> |
| <integer name="config_num_physical_slots">1</integer> |
| |
| <!--The default "usage setting" indicating that the device is either a voice-centric |
| device (1) or a data-centric device (2). A voice-centric device will require that any cellular |
| service that it uses provides access to voice capability, and a data-centric device will |
| likewise require that the network provides access to data services. These settings are |
| sent to the cellular modem and control the behavior in accordance with 3gpp TS 24.301 sec 4.3 |
| (and equivalent functionality in other generations of cellular).--> |
| <integer name="config_default_cellular_usage_setting">1</integer> |
| |
| <!--The list of supported cellular usage settings for this device.--> |
| <integer-array translatable="false" name="config_supported_cellular_usage_settings"> |
| <item>1</item> <!-- USAGE_SETTING_VOICE_CENTRIC --> |
| <item>2</item> <!-- USAGE_SETTING_DATA_CENTRIC --> |
| </integer-array> |
| |
| <!--Thresholds for LTE dbm in status bar--> |
| <integer-array translatable="false" name="config_lteDbmThresholds"> |
| <item>-140</item> <!-- SIGNAL_STRENGTH_NONE_OR_UNKNOWN --> |
| <item>-128</item> <!-- SIGNAL_STRENGTH_POOR --> |
| <item>-118</item> <!-- SIGNAL_STRENGTH_MODERATE --> |
| <item>-108</item> <!-- SIGNAL_STRENGTH_GOOD --> |
| <item>-98</item> <!-- SIGNAL_STRENGTH_GREAT --> |
| <item>-44</item> |
| </integer-array> |
| |
| <!-- Enabled built-in zen mode condition providers --> |
| <string-array translatable="false" name="config_system_condition_providers"> |
| <item>countdown</item> |
| <item>schedule</item> |
| <item>event</item> |
| </string-array> |
| |
| <!-- Priority repeat caller threshold, in minutes --> |
| <integer name="config_zen_repeat_callers_threshold">15</integer> |
| |
| <!-- Flags enabling default window features. See Window.java --> |
| <bool name="config_defaultWindowFeatureOptionsPanel">true</bool> |
| <bool name="config_defaultWindowFeatureContextMenu">true</bool> |
| |
| <!-- If true, the transition for a RemoteViews is read from a resource instead of using the |
| default scale-up transition. --> |
| <bool name="config_overrideRemoteViewsActivityTransition">false</bool> |
| |
| <!-- The maximum bitmap size that can be written to a MediaMetadata object. This value |
| is the max width/height allowed in dips.--> |
| <dimen name="config_mediaMetadataBitmapMaxSize">320dp</dimen> |
| |
| <string translatable="false" name="prohibit_manual_network_selection_in_gobal_mode">false</string> |
| |
| <!-- An array of CDMA roaming indicators which means international roaming --> |
| <integer-array translatable="false" name="config_cdma_international_roaming_indicators" /> |
| |
| <!-- flag to indicate if EF LI/EF PL should be used for system language --> |
| <bool name="config_use_sim_language_file">false</bool> |
| |
| <!-- Use ERI text for network name on CDMA LTE --> |
| <bool name="config_LTE_eri_for_network_name">true</bool> |
| |
| <!-- Whether to start in touch mode --> |
| <bool name="config_defaultInTouchMode">true</bool> |
| |
| <!-- Time adjustment, in milliseconds, applied to the default double tap threshold |
| used for gesture detection by the screen magnifier. --> |
| <integer name="config_screen_magnification_multi_tap_adjustment">-50</integer> |
| |
| <!-- Scale factor threshold used by the screen magnifier to determine when to switch from |
| panning to scaling the magnification viewport. --> |
| <item name="config_screen_magnification_scaling_threshold" format="float" type="dimen">0.3</item> |
| |
| <!-- Whether to support magnification area. If not enabled, it would hide the entry in |
| magnification settings and adjust the default magnification capability. --> |
| <bool name="config_magnification_area">true</bool> |
| |
| <!-- If true, the display will be shifted around in ambient mode. --> |
| <bool name="config_enableBurnInProtection">false</bool> |
| |
| <!-- Specifies the maximum burn-in offset displacement from the center. If -1, no maximum value |
| will be used. --> |
| <integer name="config_burnInProtectionMaxRadius">-1</integer> |
| |
| <!-- Specifies the minimum burn-in offset horizontally. --> |
| <integer name="config_burnInProtectionMinHorizontalOffset">0</integer> |
| |
| <!-- Specifies the maximum burn-in offset horizontally. --> |
| <integer name="config_burnInProtectionMaxHorizontalOffset">0</integer> |
| |
| <!-- Specifies the minimum burn-in offset vertically. --> |
| <integer name="config_burnInProtectionMinVerticalOffset">0</integer> |
| |
| <!-- Specifies the maximum burn-in offset vertically. --> |
| <integer name="config_burnInProtectionMaxVerticalOffset">0</integer> |
| |
| <!-- Limit for the number of face templates per user --> |
| <integer name="config_faceMaxTemplatesPerUser">1</integer> |
| |
| <!-- For performance and storage reasons, limit the number of fingerprints per user --> |
| <integer name="config_fingerprintMaxTemplatesPerUser">5</integer> |
| |
| <!-- Specify if the fingerprint hardware support gestures--> |
| <bool name="config_fingerprintSupportsGestures">false</bool> |
| |
| <!-- This config is used to force VoiceInteractionService to start on certain low ram devices. |
| It declares the package name of VoiceInteractionService that should be started. --> |
| <string translatable="false" name="config_forceVoiceInteractionServicePackage"></string> |
| |
| <!-- This config is ued to determine whether animations are allowed in low power mode. --> |
| <bool name="config_allowAnimationsInLowPowerMode">false</bool> |
| |
| <!-- Whether device supports double tap to wake --> |
| <bool name="config_supportDoubleTapWake">false</bool> |
| |
| <!-- The RadioAccessFamilies supported by the device. |
| Empty is viewed as "all". Only used on devices which |
| don't support RIL_REQUEST_GET_RADIO_CAPABILITY |
| format is UMTS|LTE|... --> |
| <string translatable="false" name="config_radio_access_family"></string> |
| |
| <!-- Whether the main built-in display is round. This will affect |
| Configuration.screenLayout's SCREENLAYOUT_ROUND_MASK flags for Configurations on the |
| main built-in display. Change this in device-specific overlays. |
| Defaults to the older, deprecated config_windowIsRound already used in |
| some existing device-specific resource overlays. --> |
| <bool name="config_mainBuiltInDisplayIsRound">@bool/config_windowIsRound</bool> |
| |
| <!-- The bounding path of the cutout region of the main built-in display. |
| Must either be empty if there is no cutout region, or a string that is parsable by |
| {@link android.util.PathParser}. |
| |
| The path is assumed to be specified in display coordinates with pixel units and in |
| the display's native orientation, with the origin of the coordinate system at the |
| center top of the display. Optionally, you can append either `@left` or `@right` to the |
| end of the path string, in order to change the path origin to either the top left, |
| or top right of the display. |
| |
| To facilitate writing device-independent emulation overlays, the marker `@dp` can be |
| appended after the path string to interpret coordinates in dp instead of px units. |
| Note that a physical cutout should be configured in pixels for the best results. |
| |
| Example for a 10px x 10px square top-center cutout: |
| <string ...>M -5,0 L -5,10 L 5,10 L 5,0 Z</string> |
| Example for a 10dp x 10dp square top-center cutout: |
| <string ...>M -5,0 L -5,10 L 5,10 L 5,0 Z @dp</string> |
| |
| @see https://www.w3.org/TR/SVG/paths.html#PathData |
| --> |
| <string translatable="false" name="config_mainBuiltInDisplayCutout"></string> |
| |
| <!-- Like config_mainBuiltInDisplayCutout, but this path is used to report the |
| one single bounding rect per device edge to the app via |
| {@link DisplayCutout#getBoundingRect}. Note that this path should try to match the visual |
| appearance of the cutout as much as possible, and may be smaller than |
| config_mainBuiltInDisplayCutout |
| --> |
| <string translatable="false" name="config_mainBuiltInDisplayCutoutRectApproximation">@string/config_mainBuiltInDisplayCutout</string> |
| |
| <!-- Whether the display cutout region of the main built-in display should be forced to |
| black in software (to avoid aliasing or emulate a cutout that is not physically existent). |
| --> |
| <bool name="config_fillMainBuiltInDisplayCutout">false</bool> |
| |
| <!-- If true, and there is a cutout on the main built in display, the cutout will be masked |
| by shrinking the display such that it does not overlap the cutout area. --> |
| <bool name="config_maskMainBuiltInDisplayCutout">false</bool> |
| |
| <!-- Ultrasound support for Mic/speaker path --> |
| <!-- Whether the default microphone audio source supports near-ultrasound frequencies |
| (range of 18 - 21 kHz). --> |
| <bool name="config_supportMicNearUltrasound">true</bool> |
| <!-- Whether the default speaker audio output path supports near-ultrasound frequencies |
| (range of 18 - 21 kHz). --> |
| <bool name="config_supportSpeakerNearUltrasound">true</bool> |
| |
| <!-- Whether the Unprocessed audio source supports the required frequency range and level --> |
| <bool name="config_supportAudioSourceUnprocessed">false</bool> |
| |
| <!-- Flag indicating device support for EAP SIM, AKA, AKA' --> |
| <bool name="config_eap_sim_based_auth_supported">true</bool> |
| |
| <!-- How long history of previous vibrations should be kept for the dumpsys. --> |
| <integer name="config_previousVibrationsDumpLimit">50</integer> |
| |
| <!-- The default vibration strength, must be between 1 and 255 inclusive. --> |
| <integer name="config_defaultVibrationAmplitude">255</integer> |
| |
| <!-- The max vibration strength allowed in audio haptic channels, must be positive or zero if |
| limit is unknown. --> |
| <item name="config_hapticChannelMaxVibrationAmplitude" format="float" type="dimen">0</item> |
| |
| <!-- If the device should still vibrate even in low power mode, for certain priority vibrations |
| (e.g. accessibility, alarms). This is mainly for Wear devices that don't have speakers. --> |
| <bool name="config_allowPriorityVibrationsInLowPowerMode">false</bool> |
| |
| <!-- The duration (in milliseconds) that should be used to convert vibration ramps to a sequence |
| of fixed amplitude steps on devices without PWLE support. --> |
| <integer name="config_vibrationWaveformRampStepDuration">5</integer> |
| |
| <!-- The duration (in milliseconds) that should be applied to waveform vibrations that ends in |
| non-zero amplitudes, to bring the vibrator amplitude down to zero using this timing. --> |
| <integer name="config_vibrationWaveformRampDownDuration">0</integer> |
| |
| <!-- Number of retries Cell Data should attempt for a given error code before |
| restarting the modem. |
| Error codes not listed will not lead to modem restarts. |
| Array of "code#,retry#" --> |
| <string-array name="config_cell_retries_per_error_code"> |
| </string-array> |
| |
| <!-- Set initial MaxRetry value for operators --> |
| <integer name="config_mdc_initial_max_retry">1</integer> |
| |
| <!-- The OEM specified sensor type for the gesture to launch the camera app. --> |
| <integer name="config_cameraLaunchGestureSensorType">-1</integer> |
| <!-- The OEM specified sensor string type for the gesture to launch camera app, this value |
| must match the value of config_cameraLaunchGestureSensorType in OEM's HAL --> |
| <string translatable="false" name="config_cameraLaunchGestureSensorStringType"></string> |
| |
| <!-- Allow the gesture to double tap the power button twice to start the camera while the device |
| is non-interactive. --> |
| <bool name="config_cameraDoubleTapPowerGestureEnabled">true</bool> |
| |
| <!-- Allow the gesture to quick tap the power button multiple times to start the emergency sos |
| experience while the device is non-interactive. --> |
| <bool name="config_emergencyGestureEnabled">true</bool> |
| |
| <!-- Allow the gesture power + volume up to change the ringer mode while the device |
| is interactive. --> |
| <bool name="config_volumeHushGestureEnabled">true</bool> |
| |
| <!-- Name of the component to handle network policy notifications. If present, |
| disables NetworkPolicyManagerService's presentation of data-usage notifications. --> |
| <string translatable="false" name="config_networkPolicyNotificationComponent"></string> |
| |
| <!-- The BT name of the keyboard packaged with the device. If this is defined, SystemUI will |
| automatically try to pair with it when the device exits tablet mode. --> |
| <string translatable="false" name="config_packagedKeyboardName"></string> |
| |
| <!-- The device supports freeform window management. Windows have title bars and can be moved |
| and resized. If you set this to true, you also need to add |
| PackageManager.FEATURE_FREEFORM_WINDOW_MANAGEMENT feature to your device specification. |
| The duplication is necessary, because this information is used before the features are |
| available to the system.--> |
| <bool name="config_freeformWindowManagement">false</bool> |
| |
| <!-- If set, this will force all windows to draw the status bar background, including the apps |
| that have not requested doing so (via the WindowManager.FLAG_DRAWS_SYSTEM_BAR_BACKGROUNDS |
| flag). --> |
| <bool name="config_forceWindowDrawsStatusBarBackground">true</bool> |
| |
| <!-- Controls the opacity of the navigation bar depending on the visibility of the |
| various workspace stacks. |
| 0 - Nav bar is always opaque when either the freeform stack or docked stack is visible. |
| 1 - Nav bar is always translucent when the freeform stack is visible, otherwise always |
| opaque. |
| 2 - Nav bar is never forced opaque. |
| --> |
| <integer name="config_navBarOpacityMode">0</integer> |
| |
| <!-- Controls the navigation bar interaction mode: |
| 0: 3 button mode (back, home, overview buttons) |
| 1: 2 button mode (back, home buttons + swipe up for overview) |
| 2: gestures only for back, home and overview --> |
| <integer name="config_navBarInteractionMode">0</integer> |
| |
| <!-- Controls whether the nav bar can move from the bottom to the side in landscape. |
| Only applies if the device display is not square. --> |
| <bool name="config_navBarCanMove">true</bool> |
| |
| <!-- Controls whether the navigation bar lets through taps. --> |
| <bool name="config_navBarTapThrough">false</bool> |
| |
| <!-- Controls whether the IME renders the back and IME switcher buttons or not. --> |
| <bool name="config_imeDrawsImeNavBar">false</bool> |
| |
| <!-- Controls whether the side edge gestures can always trigger the transient nav bar to |
| show. --> |
| <bool name="config_navBarAlwaysShowOnSideEdgeGesture">false</bool> |
| |
| <!-- Controls the size of the back gesture inset. --> |
| <dimen name="config_backGestureInset">0dp</dimen> |
| |
| <!-- Array of values used in Gesture Navigation settings page to reduce/increase the back |
| gesture's inset size. These values will be multiplied into the default width, read from the |
| gesture navigation overlay package, in order to create 3 different sizes which are selectable |
| via a slider component. --> |
| <array name="config_backGestureInsetScales"> |
| <item>0.60</item> |
| <item>1.00</item> |
| <item>1.33</item> |
| </array> |
| |
| <!-- Controls whether the navbar needs a scrim with |
| {@link Window#setEnsuringNavigationBarContrastWhenTransparent}. --> |
| <bool name="config_navBarNeedsScrim">true</bool> |
| |
| <!-- Controls whether seamless rotation should be allowed even though the navbar can move |
| (which normally prevents seamless rotation). --> |
| <bool name="config_allowSeamlessRotationDespiteNavBarMoving">false</bool> |
| |
| <!-- Controls whether hints for gestural navigation are shown when the device is setup. |
| This should only be set when the device has gestural navigation enabled by default. --> |
| <bool name="config_showGesturalNavigationHints">false</bool> |
| |
| <!-- Controls the free snap mode for the docked stack divider. In this mode, the divider can be |
| snapped to any position between the first target and the last target. --> |
| <bool name="config_dockedStackDividerFreeSnapMode">false</bool> |
| |
| <!-- The minimum aspect ratio (width/height) that is supported for picture-in-picture. Any |
| ratio smaller than this is considered too tall and thin to be usable. Currently, this |
| is the inverse of the max landscape aspect ratio (1:2.39), but this is an extremely |
| skinny aspect ratio that is not expected to be widely used. --> |
| <item name="config_pictureInPictureMinAspectRatio" format="float" type="dimen">0.41841004184</item> |
| |
| <!-- The maximum aspect ratio (width/height) that is supported for picture-in-picture. Any |
| ratio larger than this is considered to wide and short to be usable. Currently 2.39:1. --> |
| <item name="config_pictureInPictureMaxAspectRatio" format="float" type="dimen">2.39</item> |
| |
| <!-- The maximum number of actions that is supported for picture-in-picture. This number |
| must be no less than 3 for back compatibility. --> |
| <integer name="config_pictureInPictureMaxNumberOfActions">3</integer> |
| |
| <!-- The behavior when an activity has not specified a preference to dock big overlays or not. |
| Docking puts the activity side-by-side next to the big overlay windows. --> |
| <bool name="config_dockBigOverlayWindows">false</bool> |
| |
| <!-- Controls the snap mode for the docked stack divider |
| 0 - 3 snap targets: left/top has 16:9 ratio, 1:1, and right/bottom has 16:9 ratio |
| 1 - 3 snap targets: fixed ratio, 1:1, (1 - fixed ratio) |
| 2 - 1 snap target: 1:1 |
| --> |
| <integer name="config_dockedStackDividerSnapMode">0</integer> |
| |
| <!-- The maximum aspect ratio (longerSide/shorterSide) that is treated as close-to-square. The |
| orientation requests from apps would be ignored if the display is close-to-square. --> |
| <item name="config_closeToSquareDisplayMaxAspectRatio" format="float" type="dimen">1.333</item> |
| |
| <!-- List of comma separated package names for which we the system will not show crash, ANR, |
| etc. dialogs. --> |
| <string translatable="false" name="config_appsNotReportingCrashes"></string> |
| |
| <!-- Inactivity threshold (in milliseconds) used in JobScheduler. JobScheduler will consider |
| the device to be "idle" after being inactive for this long. --> |
| <integer name="config_jobSchedulerInactivityIdleThreshold">1860000</integer> |
| <!-- The alarm window (in milliseconds) that JobScheduler uses to enter the idle state --> |
| <integer name="config_jobSchedulerIdleWindowSlop">300000</integer> |
| |
| <!-- If true, jobs from background user will be restricted --> |
| <bool name="config_jobSchedulerRestrictBackgroundUser">false</bool> |
| <!-- The length of grace period after user becomes background user --> |
| <integer name="config_jobSchedulerUserGracePeriod">60000</integer> |
| |
| <!-- If true, all guest users created on the device will be ephemeral. --> |
| <bool name="config_guestUserEphemeral">false</bool> |
| |
| <!-- Whether device should always have a guest user available. If true, guest user will be |
| created on boot, and a new guest user will be created in the background anytime the current |
| guest user is removed. Instead of showing "Add guest" and "Remove guest", the UI will show |
| "Guest" and "Reset guest". --> |
| <bool name="config_guestUserAutoCreated">false</bool> |
| |
| <!-- Enforce strong auth on boot. Setting this to false represents a security risk and should |
| not be ordinarily done. The only case in which this might be permissible is in a car head |
| unit where there are hardware mechanisms to protect the device (physical keys) and not |
| much in the way of user data. |
| --> |
| <bool name="config_strongAuthRequiredOnBoot">true</bool> |
| |
| <!-- Wallpaper cropper package. Used as the default cropper if the active launcher doesn't |
| handle wallpaper cropping. |
| --> |
| <string name="config_wallpaperCropperPackage" translatable="false">com.android.wallpapercropper</string> |
| |
| <!-- True if the device supports at least one form of multi-window. |
| E.g. freeform, split-screen, picture-in-picture. --> |
| <bool name="config_supportsMultiWindow">true</bool> |
| |
| <!-- True if the device supports split screen as a form of multi-window. --> |
| <bool name="config_supportsSplitScreenMultiWindow">true</bool> |
| |
| <!-- Whether the device supports non-resizable activity in multi windowing modes. |
| -1: The device doesn't support non-resizable in multi windowing modes. |
| 0: The device supports non-resizable in multi windowing modes only if this is a large |
| screen (smallest width >= {@link config_largeScreenSmallestScreenWidthDp}). |
| 1: The device always supports non-resizable in multi windowing modes. |
| --> |
| <integer name="config_supportsNonResizableMultiWindow">0</integer> |
| |
| <!-- Whether the device checks the activity min width/height to determine if it can be shown in |
| multi windowing modes. |
| -1: The device ignores the activity min width/height when determining if it can be shown in |
| multi windowing modes. |
| 0: If this is a small screen (smallest width < |
| {@link config_largeScreenSmallestScreenWidthDp}), the device compares the activity min |
| width/height with the min multi windowing modes dimensions the device supports to |
| determine if the activity can be shown in multi windowing modes |
| 1: The device always compare the activity min width/height with the min multi windowing |
| modes dimensions {@link config_minPercentageMultiWindowSupportWidth} the device |
| supports to determine if the activity can be shown in multi windowing modes. |
| --> |
| <integer name="config_respectsActivityMinWidthHeightMultiWindow">0</integer> |
| |
| <!-- This value is only used when the device checks activity min height to determine if it |
| can be shown in multi windowing modes. |
| If the activity min height is greater than this percentage of the display height in |
| portrait, it will not be allowed to be shown in multi windowing modes. |
| The value should be between [0 - 1]. |
| --> |
| <item name="config_minPercentageMultiWindowSupportHeight" format="float" type="dimen">0.3</item> |
| |
| <!-- This value is only used when the device checks activity min width to determine if it |
| can be shown in multi windowing modes. |
| If the activity min width is greater than this percentage of the display width in |
| landscape, it will not be allowed to be shown in multi windowing modes. |
| The value should be between [0 - 1]. |
| --> |
| <item name="config_minPercentageMultiWindowSupportWidth" format="float" type="dimen">0.5</item> |
| |
| <!-- If the display smallest screen width is greater or equal to this value, we will treat it |
| as a large screen device, which will have some multi window features enabled by default. |
| --> |
| <integer name="config_largeScreenSmallestScreenWidthDp">600</integer> |
| |
| <!-- True if the device is using legacy split. --> |
| <bool name="config_useLegacySplit">false</bool> |
| |
| <!-- True if the device supports running activities on secondary displays. --> |
| <bool name="config_supportsMultiDisplay">true</bool> |
| |
| <!-- Indicates whether the device supports bubble notifications or not. --> |
| <bool name="config_supportsBubble">true</bool> |
| |
| <!-- True if the device has no home screen. That is a launcher activity |
| where the user can launch other applications from. --> |
| <bool name="config_noHomeScreen">false</bool> |
| |
| <!-- True if the device supports system decorations on secondary displays. --> |
| <bool name="config_supportsSystemDecorsOnSecondaryDisplays">true</bool> |
| |
| <!-- True if the device supports insecure lock screen. --> |
| <bool name="config_supportsInsecureLockScreen">true</bool> |
| |
| <!-- True if the device requires AppWidgetService even if it does not have |
| the PackageManager.FEATURE_APP_WIDGETS feature --> |
| <bool name="config_enableAppWidgetService">false</bool> |
| |
| <!-- True if the device supports Sustained Performance Mode--> |
| <bool name="config_sustainedPerformanceModeSupported">false</bool> |
| |
| <!-- File used to enable the double touch gesture. |
| TODO: move to input HAL once ready. --> |
| <string name="config_doubleTouchGestureEnableFile"></string> |
| |
| <!-- Comma-separated list of unbundled packages which can connect to the |
| tv remote provider. The tv remote service is an example of such a |
| service. --> |
| <string name="config_tvRemoteServicePackage" translatable="false"></string> |
| |
| <!-- The package name of the package implementing the custom notification panel --> |
| <string name="config_notificationHandlerPackage" translatable="false"></string> |
| |
| <!-- True if the device supports persisting security logs across reboots. |
| This requires the device's kernel to have pstore and pmsg enabled, |
| and DRAM to be powered and refreshed through all stages of reboot. --> |
| <bool name="config_supportPreRebootSecurityLogs">false</bool> |
| |
| <!-- Default files to pin via Pinner Service --> |
| <string-array translatable="false" name="config_defaultPinnerServiceFiles"> |
| </string-array> |
| |
| <!-- True if camera app should be pinned via Pinner Service --> |
| <bool name="config_pinnerCameraApp">false</bool> |
| |
| <!-- True if home app should be pinned via Pinner Service --> |
| <bool name="config_pinnerHomeApp">false</bool> |
| |
| <!-- True if assistant app should be pinned via Pinner Service --> |
| <bool name="config_pinnerAssistantApp">false</bool> |
| |
| <!-- Number of days preloaded file cache should be preserved on a device before it can be |
| deleted --> |
| <integer name="config_keepPreloadsMinDays">7</integer> |
| |
| <!-- Flag indicating whether round icons should be parsed from the application manifest. --> |
| <bool name="config_useRoundIcon">false</bool> |
| |
| <!-- Flag indicating whether the assist disclosure can be disabled using |
| ASSIST_DISCLOSURE_ENABLED. --> |
| <bool name="config_allowDisablingAssistDisclosure">true</bool> |
| |
| <!-- True if the device supports system navigation keys. --> |
| <bool name="config_supportSystemNavigationKeys">false</bool> |
| |
| <!-- emergency call number for the emergency affordance --> |
| <string name="config_emergency_call_number" translatable="false">112</string> |
| |
| <!-- Package name that provides Emergency Dialer --> |
| <string name="config_emergency_dialer_package" translatable="false">com.android.phone</string> |
| |
| <!-- Do not translate. Mcc codes whose existence trigger the presence of emergency |
| affordances--> |
| <string-array name="config_emergency_iso_country_codes" translatable="false"> |
| <item>in</item> |
| </string-array> |
| |
| <!-- Package name for the device provisioning package. --> |
| <string name="config_deviceProvisioningPackage"></string> |
| |
| <!-- Colon separated list of package names that should be granted DND access --> |
| <string name="config_defaultDndAccessPackages" translatable="false">com.android.camera2</string> |
| |
| <!-- User restrictions set when the first user is created. |
| Note: Also update appropriate overlay files. --> |
| <string-array translatable="false" name="config_defaultFirstUserRestrictions"> |
| </string-array> |
| |
| <!-- Specifies whether certain permissions should be individually controlled. --> |
| <bool name="config_permissionsIndividuallyControlled">false</bool> |
| |
| <!-- Specifies whether the user has to give consent to manage wireless (wifi + bluetooth). --> |
| <bool name="config_wirelessConsentRequired">false</bool> |
| |
| <!-- Default value for android:focusableInTouchMode for some framework scrolling containers. |
| ListView/GridView are notably absent since this is their default anyway. |
| Set to true for watch devices. --> |
| <bool name="config_focusScrollContainersInTouchMode">false</bool> |
| |
| <string name="config_networkOverLimitComponent" translatable="false">com.android.systemui/com.android.systemui.net.NetworkOverLimitActivity</string> |
| <string name="config_dataUsageSummaryComponent" translatable="false">com.android.settings/com.android.settings.Settings$DataUsageSummaryActivity</string> |
| |
| <!-- Flag specifying whether user-switch operations have custom UI. When false, user-switch |
| UI is handled by ActivityManagerService --> |
| <bool name="config_customUserSwitchUi">false</bool> |
| |
| <!-- A array of regex to treat a SMS as VVM SMS if the message body matches. |
| Each item represents an entry, which consists of two parts: |
| a comma (,) separated list of MCCMNC the regex applies to, followed by a semicolon (;), and |
| then the regex itself. --> |
| <string-array translatable="false" name="config_vvmSmsFilterRegexes"> |
| <!-- Verizon requires any SMS that starts with //VZWVVM to be treated as a VVM SMS--> |
| <item>310004,310010,310012,310013,310590,310890,310910,311110,311270,311271,311272,311273,311274,311275,311276,311277,311278,311279,311280,311281,311282,311283,311284,311285,311286,311287,311288,311289,311390,311480,311481,311482,311483,311484,311485,311486,311487,311488,311489;^//VZWVVM.*</item> |
| </string-array> |
| |
| <!-- This config is holding calling number conversion map - expected to convert to emergency |
| number. Formats for this config as below: |
| <item>[dialstring1],[dialstring2],[dialstring3]:[replacement]</item> |
| |
| E.g. for Taiwan Type Approval, 110 and 119 should be converted to 112. |
| <item>110,119:112</item> |
| --> |
| <string-array translatable="false" name="config_convert_to_emergency_number_map" /> |
| |
| <!-- An array of packages for which notifications cannot be blocked. |
| Should only be used for core device functionality that must not be |
| rendered inoperative for safety reasons, like the phone dialer and |
| SMS handler. --> |
| <string-array translatable="false" name="config_nonBlockableNotificationPackages"> |
| <item>com.android.dialer</item> |
| <item>com.android.messaging</item> |
| <item>com.android.cellbroadcastreceiver.module</item> |
| </string-array> |
| |
| <!-- An array of packages that can make sound on the ringer stream in priority-only DND |
| mode --> |
| <string-array translatable="false" name="config_priorityOnlyDndExemptPackages"> |
| <item>com.android.dialer</item> |
| <item>com.android.server.telecom</item> |
| <item>com.android.systemui</item> |
| <item>android</item> |
| </string-array> |
| |
| <!-- The default value for transition animation scale found in developer settings. |
| 1.0 corresponds to 1x animator scale, 0 means that there will be no transition |
| animations. Note that this is only a default and will be overridden by a |
| user-set value if toggled by settings so the "Transition animation scale" setting |
| should also be hidden if intended to be permanent. --> |
| <item name="config_appTransitionAnimationDurationScaleDefault" format="float" type="dimen">1.0</item> |
| |
| <!-- Flag indicates that whether non-system apps can be installed on internal storage. --> |
| <bool name="config_allow3rdPartyAppOnInternal">true</bool> |
| |
| <!-- Specifies the path that is used by AdaptiveIconDrawable class to crop launcher icons. --> |
| <string name="config_icon_mask" translatable="false">"M50,0L92,0C96.42,0 100,4.58 100 8L100,92C100, 96.42 96.42 100 92 100L8 100C4.58, 100 0 96.42 0 92L0 8 C 0 4.42 4.42 0 8 0L50 0Z"</string> |
| |
| <!-- The component name, flattened to a string, for the default accessibility service to be |
| enabled by the accessibility shortcut. This service must be trusted, as it can be activated |
| without explicit consent of the user. If no accessibility service with the specified name |
| exists on the device, the accessibility shortcut will be disabled by default. --> |
| <string name="config_defaultAccessibilityService" translatable="false"></string> |
| |
| <!-- Flag indicates that whether escrow token API is enabled for TrustAgent --> |
| <!-- Warning: This API can be dangerous when not implemented properly. In particular, |
| escrow token must NOT be retrievable from device storage. In other words, either |
| escrow token is not stored on device or its ciphertext is stored on device while |
| the decryption key is not. Before enabling this feature, please ensure you've read |
| and followed the pertinent sections of the escrow tokens section of the CDD <link>--> |
| <!-- TODO(b/35230407) complete the link field --> |
| <bool name="config_allowEscrowTokenForTrustAgent">false</bool> |
| |
| <!-- A flattened ComponentName which corresponds to the only trust agent that should be enabled |
| by default. If the default value is used, or set to an empty string, the restriction will |
| not be applied. --> |
| <string name="config_defaultTrustAgent" translatable="false"></string> |
| |
| <!-- Colon separated list of package names that should be granted Notification Listener access --> |
| <string name="config_defaultListenerAccessPackages" translatable="false"></string> |
| |
| <!-- Maximum size, specified in pixels, to restrain the display space width to. Height and |
| density will be scaled accordingly to maintain aspect ratio. A value of 0 indicates no |
| constraint will be enforced. --> |
| <integer name="config_maxUiWidth">0</integer> |
| |
| <!-- Whether the device supports quick settings and its associated APIs --> |
| <bool name="config_quickSettingsSupported">true</bool> |
| |
| <!-- The component name, flattened to a string, for the default autofill service |
| to enabled for an user. This service must be trusted, as it can be activated |
| without explicit consent of the user. If no autofill service with the |
| specified name exists on the device, autofill will be disabled by default. |
| --> |
| <string name="config_defaultAutofillService" translatable="false"></string> |
| |
| <!-- The package name for the OEM custom system textclassifier service. |
| This service must be trusted, as it can be activated without explicit consent of the user. |
| Example: "com.android.textclassifier" |
| If this is empty, the default textclassifier service (i.e. config_servicesExtensionPackage) |
| will be used. |
| |
| See android.view.textclassifier.TextClassificationManager. |
| --> |
| <string name="config_defaultTextClassifierPackage" translatable="false"></string> |
| |
| |
| <!-- The package name for the system companion device manager service. |
| This service must be trusted, as it can be activated without explicit consent of the user. |
| Example: "com.android.companiondevicemanager" |
| See android.companion.CompanionDeviceManager. |
| --> |
| <string name="config_companionDeviceManagerPackage" translatable="false"></string> |
| |
| <!-- A list of packages managing companion device(s) by the same manufacturers as the main |
| device. It will fall back to showing a prompt if the association has been called multiple |
| times in a short period. |
| Note that config_companionDeviceManagerPackage and config_companionDeviceCerts are |
| parallel arrays. |
| --> |
| <string-array name="config_companionDevicePackages" translatable="false"></string-array> |
| |
| <!-- A list of SHA256 Certificates managing companion device(s) by the same manufacturers as |
| the main device. It will fall back to showing a prompt if the association has been called |
| multiple times in a short period. |
| Note that config_companionDeviceCerts and config_companionDeviceManagerPackage are parallel |
| arrays. |
| Example: "1A:2B:3C:4D" |
| --> |
| <string-array name="config_companionDeviceCerts" translatable="false"></string-array> |
| |
| <!-- The package name for the default wellbeing app. |
| This package must be trusted, as it has the permissions to control other applications |
| on the device. |
| Example: "com.android.wellbeing" |
| --> |
| <string name="config_defaultWellbeingPackage" translatable="false"></string> |
| |
| <!-- The component name for the default system attention service. |
| This service must be trusted, as it can be activated without explicit consent of the user. |
| See android.attention.AttentionManagerService. |
| --> |
| <string name="config_defaultAttentionService" translatable="false"></string> |
| |
| <!-- The component name for the default system rotation resolver service. |
| This service must be trusted, as it can be activated without explicit consent of the user. |
| See android.service.rotationresolver.RotationResolverService. |
| --> |
| <string name="config_defaultRotationResolverService" translatable="false"></string> |
| |
| <!-- The component name for the default system AmbientContextEvent detection service. |
| This service must be trusted, as it can be activated without explicit consent of the user. |
| See android.service.ambientcontext.AmbientContextDetectionService. |
| --> |
| <string name="config_defaultAmbientContextDetectionService" translatable="false"></string> |
| |
| <!-- Component name that accepts ACTION_SEND intents for requesting ambient context consent. --> |
| <string translatable="false" name="config_defaultAmbientContextConsentComponent"></string> |
| |
| <!-- Intent extra key for the caller's package name while requesting ambient context consent. |
| --> |
| <string translatable="false" name="config_ambientContextPackageNameExtraKey"></string> |
| |
| <!-- Intent extra key for the event code int array while requesting ambient context consent. --> |
| <string translatable="false" name="config_ambientContextEventArrayExtraKey"></string> |
| |
| <!-- The component name for the system-wide captions manager service. |
| This service must be trusted, as the system binds to it and keeps it running. |
| Example: "com.android.captions/.SystemCaptionsManagerService" |
| --> |
| <string name="config_defaultSystemCaptionsManagerService" translatable="false"></string> |
| |
| <!-- Indicates whether the system wide captions service should also support |
| call captioning. |
| --> |
| <bool name="config_systemCaptionsServiceCallsEnabled" translatable="false"></bool> |
| |
| <!-- The package name for the incident report approver app. |
| This app is usually PermissionController or an app that replaces it. When |
| a bugreport or incident report with EXPLICT-level sharing flags is going to be |
| shared, this app will be sent the PENDING_INCIDENT_REPORTS_CHANGED broadcast. |
| --> |
| <string name="config_incidentReportApproverPackage" translatable="false">com.android.permissioncontroller</string> |
| |
| <!-- The package name for the system's content capture service. |
| This service must be trusted, as it can be activated without explicit consent of the user. |
| If no service with the specified name exists on the device, content capture will be |
| disabled. |
| Example: "com.android.contentcapture/.ContentcaptureService" |
| --> |
| <string name="config_defaultContentCaptureService" translatable="false"></string> |
| |
| <!-- The package name for the system's augmented autofill service. |
| This service must be trusted, as it can be activated without explicit consent of the user. |
| If no service with the specified name exists on the device, augmented autofill wil be |
| disabled. |
| Example: "com.android.augmentedautofill/.AugmentedAutofillService" |
| --> |
| <string name="config_defaultAugmentedAutofillService" translatable="false"></string> |
| |
| <!-- The package name list for the system's cloudsearch service. |
| This service returns cloudsearch results. |
| This service must be trusted, as it can be activated without explicit consent of the user. |
| If no service with the specified name exists on the device, cloudsearch will be disabled. |
| Example: "com.android.intelligence/.CloudSearchService" |
| config_defaultCloudSearchServices is for the multiple provider case. |
| --> |
| <string-array name="config_defaultCloudSearchServices"></string-array> |
| |
| <!-- The package name for the system's translation service. |
| This service must be trusted, as it can be activated without explicit consent of the user. |
| If no service with the specified name exists on the device, translation wil be |
| disabled. |
| Example: "com.android.translation/.TranslationService" |
| --> |
| <string name="config_defaultTranslationService" translatable="false"></string> |
| |
| <!-- The package name for the system's app prediction service. |
| This service must be trusted, as it can be activated without explicit consent of the user. |
| Example: "com.android.intelligence/.AppPredictionService" |
| --> |
| <string name="config_defaultAppPredictionService" translatable="false"></string> |
| |
| <!-- The package name for the system's content suggestions service. |
| Provides suggestions for text and image selection regions in snapshots of apps and should |
| be able to classify the type of entities in those selections. |
| |
| This service must be trusted, as it can be activated without explicit consent of the user. |
| If no service with the specified name exists on the device, content suggestions wil be |
| disabled. |
| Example: "com.android.contentsuggestions/.ContentSuggestionsService" |
| --> |
| <string name="config_defaultContentSuggestionsService" translatable="false"></string> |
| |
| <!-- The package name for the system's search ui service. |
| This service returns search results when provided with an input string. |
| |
| This service must be trusted, as it can be activated without explicit consent of the user. |
| If no service with the specified name exists on the device, on device search wil be |
| disabled. |
| Example: "com.android.intelliegence/.SearchUiService" |
| --> |
| <string name="config_defaultSearchUiService" translatable="false"></string> |
| |
| <!-- The package name for the system's smartspace service. |
| This service returns smartspace results. |
| |
| This service must be trusted, as it can be activated without explicit consent of the user. |
| If no service with the specified name exists on the device, smartspace will be disabled. |
| Example: "com.android.intelligence/.SmartspaceService" |
| --> |
| <string name="config_defaultSmartspaceService" translatable="false"></string> |
| |
| <!-- The package name for the system's speech recognition service. |
| This service must be trusted, as it can be activated without explicit consent of the user. |
| Example: "com.android.speech/.RecognitionService" |
| --> |
| <string name="config_defaultOnDeviceSpeechRecognitionService" translatable="false"></string> |
| |
| <string name="config_defaultMusicRecognitionService" translatable="false"></string> |
| |
| <!-- The package name for the system's wallpaper effects generation service. |
| This service returns wallpaper effects results. |
| This service must be trusted, as it can be activated without explicit consent of the user. |
| If no service with the specified name exists on the device, wallpaper effects |
| generation service will be disabled. |
| Example: "com.android.intelligence/.WallpaperEffectsGenerationService" |
| --> |
| <string name="config_defaultWallpaperEffectsGenerationService" translatable="false"></string> |
| |
| <!-- The package name for the default retail demo app. |
| This package must be trusted, as it has the permissions to query the usage stats on the |
| device. |
| Example: "com.google.android.retaildemo" |
| --> |
| <string name="config_retailDemoPackage" translatable="false"></string> |
| |
| <!-- The package signature hash for the default retail demo app. |
| This package must be trusted, as it has the permissions to query the usage stats on the |
| device. |
| --> |
| <string name="config_retailDemoPackageSignature" translatable="false"></string> |
| |
| <!-- Whether the device uses the default focus highlight when focus state isn't specified. --> |
| <bool name="config_useDefaultFocusHighlight">true</bool> |
| |
| <!-- Flag indicating that the entire notification header can be clicked to expand the |
| notification. If false, then the expand icon has to be clicked in order for the expand |
| to occur. The expand button will have increased touch boundaries to accomodate this. --> |
| <bool name="config_notificationHeaderClickableForExpand">false</bool> |
| |
| <!-- Default data warning level in mb --> |
| <integer name="default_data_warning_level_mb">2048</integer> |
| |
| <!-- When true, indicates that the vendor's IMS implementation requires a workaround when |
| sending a request to enable or disable the camera while the video session is also |
| paused. --> |
| <bool name="config_useVideoPauseWorkaround">false</bool> |
| |
| <!-- Whether to send a custom package name with the PSD.--> |
| <bool name="config_sendPackageName">false</bool> |
| |
| <!-- Name for the set of keys associating package names --> |
| <string name="config_helpPackageNameKey" translatable="false"></string> |
| |
| <!-- Name for the set of values of package names --> |
| <string name="config_helpPackageNameValue" translatable="false"></string> |
| |
| <!-- Intent key for the package name keys --> |
| <string name="config_helpIntentExtraKey" translatable="false"></string> |
| |
| <!-- Intent key for package name values --> |
| <string name="config_helpIntentNameKey" translatable="false"></string> |
| |
| <!-- Intent key for the package name keys --> |
| <string name="config_feedbackIntentExtraKey" translatable="false"></string> |
| |
| <!-- Intent key for package name values --> |
| <string name="config_feedbackIntentNameKey" translatable="false"></string> |
| |
| <!-- The apps that need to be hidden when they are disabled --> |
| <string-array name="config_hideWhenDisabled_packageNames"></string-array> |
| |
| <!-- Additional non-platform defined global settings exposed to Instant Apps --> |
| <string-array name="config_allowedGlobalInstantAppSettings"></string-array> |
| |
| <!-- Additional non-platform defined system settings exposed to Instant Apps --> |
| <string-array name="config_allowedSystemInstantAppSettings"></string-array> |
| |
| <!-- Additional non-platform defined secure settings exposed to Instant Apps --> |
| <string-array name="config_allowedSecureInstantAppSettings"></string-array> |
| |
| <!-- Handle volume keys directly in Window Manager without passing them to the foreground app --> |
| <bool name="config_handleVolumeKeysInWindowManager">false</bool> |
| |
| <!-- Rely or not on hardcoded aliased streams table within AudioService --> |
| <bool name="config_handleVolumeAliasesUsingVolumeGroups">false</bool> |
| |
| <!-- Volume level of in-call notification tone playback [0..1] --> |
| <item name="config_inCallNotificationVolume" format="float" type="dimen">.10</item> |
| |
| <!-- URI for in call notification sound --> |
| <string translatable="false" name="config_inCallNotificationSound">/product/media/audio/ui/InCallNotification.ogg</string> |
| |
| <!-- URI for camera shutter sound --> |
| <string translatable="false" name="config_cameraShutterSound">/product/media/audio/ui/camera_click.ogg</string> |
| |
| <!-- URI for default ringtone sound file to be used for silent ringer vibration --> |
| <string translatable="false" name="config_defaultRingtoneVibrationSound"></string> |
| |
| <!-- Default number of notifications from the same app before they are automatically grouped by the OS --> |
| <integer translatable="false" name="config_autoGroupAtCount">2</integer> |
| |
| <!-- The OEM specified sensor type for the lift trigger to launch the camera app. --> |
| <integer name="config_cameraLiftTriggerSensorType">-1</integer> |
| <!-- The OEM specified sensor string type for the gesture to launch camera app, this value |
| must match the value of config_cameraLiftTriggerSensorType in OEM's HAL --> |
| <string translatable="false" name="config_cameraLiftTriggerSensorStringType"></string> |
| |
| <!-- Default number of days to retain for the automatic storage manager. --> |
| <integer translatable="false" name="config_storageManagerDaystoRetainDefault">90</integer> |
| |
| <!-- Name of a font family to use for headlines. If empty, falls back to platform default --> |
| <string name="config_headlineFontFamily" translatable="false"></string> |
| <!-- Allows setting custom fontFeatureSettings on specific text. --> |
| <string name="config_headlineFontFeatureSettings" translatable="false"></string> |
| |
| <!-- An array of packages that need to be treated as type system in battery settings --> |
| <string-array translatable="false" name="config_batteryPackageTypeSystem"> |
| <item>com.android.providers.calendar</item> |
| <item>com.android.providers.media</item> |
| <item>com.android.systemui</item> |
| </string-array> |
| |
| <!-- An array of packages that need to be treated as type service in battery settings --> |
| <string-array translatable="false" name="config_batteryPackageTypeService"/> |
| |
| <!-- Flag indicating whether or not to enable night mode detection. --> |
| <bool name="config_enableNightMode">true</bool> |
| |
| <!-- Flag indicating that the actions buttons for a notification should be tinted with by the |
| color supplied by the Notification.Builder if present. --> |
| <bool name="config_tintNotificationActionButtons">true</bool> |
| |
| <!-- Show area update info settings in CellBroadcastReceiver and information in SIM status in Settings app --> |
| <bool name="config_showAreaUpdateInfoSettings">false</bool> |
| |
| <!-- Enable the RingtonePickerActivity in 'com.android.providers.media'. --> |
| <bool name="config_defaultRingtonePickerEnabled">true</bool> |
| |
| <!-- Allow SystemUI to show the shutdown dialog --> |
| <bool name="config_showSysuiShutdown">true</bool> |
| |
| <!-- The stable device width and height in pixels. If these aren't set to a positive number |
| then the device will use the width and height of the default display the first time it's |
| booted. --> |
| <integer name="config_stableDeviceDisplayWidth">-1</integer> |
| <integer name="config_stableDeviceDisplayHeight">-1</integer> |
| |
| <!-- List of countries in which we display 'No service' on status bar |
| instead of 'Emergency calls only' when SIM is unready. --> |
| <string-array translatable="false" name="config_display_no_service_when_sim_unready"> |
| <item>"DE"</item> |
| <item>"GB"</item> |
| <item>"JP"</item> |
| </string-array> |
| |
| <!-- Class names of device specific services inheriting com.android.server.SystemService. The |
| classes are instantiated in the order of the array. --> |
| <string-array translatable="false" name="config_deviceSpecificSystemServices"></string-array> |
| |
| <!-- Class name of the device specific implementation to replace the DevicePolicyManagerService |
| or empty if the default should be used. --> |
| <string translatable="false" name="config_deviceSpecificDevicePolicyManagerService"></string> |
| |
| <!-- Class name of the device specific implementation to replace the AudioService |
| or empty if the default should be used. --> |
| <string translatable="false" name="config_deviceSpecificAudioService"></string> |
| |
| <!-- Class name of the device specific implementation of DisplayAreaPolicy.Provider |
| or empty if the default should be used. --> |
| <string translatable="false" name="config_deviceSpecificDisplayAreaPolicyProvider"></string> |
| |
| <!-- Class name of the device specific implementation of DeviceStatePolicy.Provider |
| or empty if the default should be used. --> |
| <string translatable="false" name="config_deviceSpecificDeviceStatePolicyProvider"></string> |
| |
| <!-- Component name of media projection permission dialog --> |
| <string name="config_mediaProjectionPermissionDialogComponent" translatable="false">com.android.systemui/com.android.systemui.media.MediaProjectionPermissionActivity</string> |
| |
| <!-- Corner radius of system dialogs --> |
| <dimen name="config_dialogCornerRadius">2dp</dimen> |
| <!-- Corner radius of system buttons --> |
| <dimen name="config_buttonCornerRadius">@dimen/control_corner_material</dimen> |
| <!-- Corner radius for bottom sheet system dialogs --> |
| <dimen name="config_bottomDialogCornerRadius">@dimen/config_dialogCornerRadius</dimen> |
| <!-- Corner radius of system progress bars --> |
| <dimen name="config_progressBarCornerRadius">@dimen/progress_bar_corner_material</dimen> |
| <!-- Controls whether system buttons use all caps for text --> |
| <bool name="config_buttonTextAllCaps">true</bool> |
| <!-- Name of the font family used for system surfaces where the font should use medium weight --> |
| <string name="config_headlineFontFamilyMedium" translateable="false">@string/font_family_button_material</string> |
| <!-- Name of a font family to use for body text. --> |
| <string name="config_bodyFontFamily" translatable="false">sans-serif</string> |
| <!-- Name of a font family to use for medium body text. --> |
| <string name="config_bodyFontFamilyMedium" translatable="false">sans-serif-medium</string> |
| |
| <!-- Size of icon shown beside a preference locked by admin --> |
| <dimen name="config_restrictedIconSize">@dimen/restricted_icon_size_material</dimen> |
| |
| <string translatable="false" name="config_batterySaverDeviceSpecificConfig"></string> |
| |
| <!-- Component name that should be granted Notification Assistant access --> |
| <string name="config_defaultAssistantAccessComponent" translatable="false">android.ext.services/android.ext.services.notification.Assistant</string> |
| |
| <bool name="config_keepRestrictedProfilesInBackground">true</bool> |
| |
| <!-- Wear devices: Controls the radios affected by Activity Mode. --> |
| <string-array name="config_wearActivityModeRadios"> |
| <item>"wifi"</item> |
| </string-array> |
| |
| <!-- Default hyphenation frequency setting (0=NONE, 1=NORMAL, 2=FULL). --> |
| <item name="config_preferredHyphenationFrequency" format="integer" type="dimen">0</item> |
| |
| <!-- Package name for ManagedProvisioning which is responsible for provisioning work profiles. --> |
| <string name="config_managed_provisioning_package" translatable="false">com.android.managedprovisioning</string> |
| |
| <!-- Whether or not swipe up gesture's opt-in setting is available on this device --> |
| <bool name="config_swipe_up_gesture_setting_available">true</bool> |
| |
| <!-- Applications which are disabled unless matching a particular sku --> |
| <string-array name="config_disableApksUnlessMatchedSku_apk_list" translatable="false" /> |
| <string-array name="config_disableApkUnlessMatchedSku_skus_list" translatable="false" /> |
| |
| <!-- Whether or not we should show the option to show battery percentage --> |
| <bool name="config_battery_percentage_setting_available">true</bool> |
| |
| <!-- Whether or not battery saver should be "sticky" when manually enabled. --> |
| <bool name="config_batterySaverStickyBehaviourDisabled">false</bool> |
| |
| <!-- Config flag to track default disable threshold for Dynamic power savings enabled battery saver. --> |
| <integer name="config_dynamicPowerSavingsDefaultDisableThreshold">80</integer> |
| |
| <!-- Model of potentially misprovisioned devices. If none is specified in an overlay, an |
| empty string is passed in. --> |
| <string name="config_misprovisionedDeviceModel" translatable="false"></string> |
| |
| <!-- Brand value for attestation of misprovisioned device. --> |
| <string name="config_misprovisionedBrandValue" translatable="false"></string> |
| |
| <!-- Pre-scale volume at volume step 1 for Absolute Volume --> |
| <fraction name="config_prescaleAbsoluteVolume_index1">60%</fraction> |
| |
| <!-- Pre-scale volume at volume step 2 for Absolute Volume --> |
| <fraction name="config_prescaleAbsoluteVolume_index2">80%</fraction> |
| |
| <!-- Pre-scale volume at volume step 3 for Absolute Volume --> |
| <fraction name="config_prescaleAbsoluteVolume_index3">90%</fraction> |
| |
| <!-- Whether or not the "SMS app service" feature is enabled --> |
| <bool name="config_useSmsAppService">true</bool> |
| |
| <!-- Class name for the InputEvent compatibility processor override. |
| Empty string means use the default compatibility processor |
| (android.view.InputEventCompatProcessor). --> |
| <string name="config_inputEventCompatProcessorOverrideClassName" translatable="false"></string> |
| |
| <!-- Component name for the default module metadata provider on this device --> |
| <string name="config_defaultModuleMetadataProvider" translatable="false">com.android.modulemetadata</string> |
| |
| <!-- This is the default launcher package with an activity to use on secondary displays that |
| support system decorations. |
| This launcher package must have an activity that supports multiple instances and has |
| corresponding launch mode set in AndroidManifest. |
| {@see android.view.Display#FLAG_SHOULD_SHOW_SYSTEM_DECORATIONS} --> |
| <string name="config_secondaryHomePackage" translatable="false">com.android.launcher3</string> |
| |
| <!-- Force secondary home launcher specified in config_secondaryHomePackage always. If this is |
| not set, secondary home launcher can be replaced by user. --> |
| <bool name ="config_useSystemProvidedLauncherForSecondary">false</bool> |
| |
| <!-- If device supports corner radius on windows. |
| This should be turned off on low-end devices to improve animation performance. --> |
| <bool name="config_supportsRoundedCornersOnWindows">true</bool> |
| |
| <!-- If the sensor that skips media is available or not. --> |
| <bool name="config_skipSensorAvailable">false</bool> |
| |
| <!-- If the sensor that silences alerts is available or not. --> |
| <bool name="config_silenceSensorAvailable">false</bool> |
| |
| <!-- Enable Zram writeback feature to allow unused pages in zram be written to flash. --> |
| <bool name="config_zramWriteback">false</bool> |
| |
| <!-- Whether cbrs is supported on the device or not --> |
| <bool translatable="false" name="config_cbrs_supported">false</bool> |
| |
| <!-- Whether or not aware is enabled by default --> |
| <bool name="config_awareSettingAvailable">false</bool> |
| |
| <!-- Display White-Balance --> |
| |
| <!-- See AmbientSensor.AmbientBrightnessSensor. |
| The ambient brightness sensor rate (in milliseconds). Must be positive. --> |
| <integer name="config_displayWhiteBalanceBrightnessSensorRate">250</integer> |
| |
| <!-- See AmbientFilter. |
| How long ambient brightness changes are kept and taken into consideration |
| (in milliseconds). Must be positive. --> |
| <integer name="config_displayWhiteBalanceBrightnessFilterHorizon">10000</integer> |
| |
| <!-- See AmbientFilter.WeightedMovingAverageAmbientFilter. |
| Recent changes are prioritised by integrating their duration over y = x + intercept |
| (the higher it is, the less prioritised recent changes are). Must be a non-negative |
| number, or NaN to avoid this implementation. --> |
| <item name="config_displayWhiteBalanceBrightnessFilterIntercept" format="float" type="dimen">10.0</item> |
| |
| <!-- See AmbientSensor.AmbientColorTemperatureSensor. |
| The ambient color temperature sensor name. --> |
| <string name="config_displayWhiteBalanceColorTemperatureSensorName">com.google.sensor.color</string> |
| |
| <!-- See AmbientSensor.AmbientColorTemperatureSensor. |
| The ambient color temperature sensor rate (in milliseconds). Must be positive. --> |
| <integer name="config_displayWhiteBalanceColorTemperatureSensorRate">250</integer> |
| |
| <!-- See AmbientFilter. |
| How long ambient color temperature changes are kept and taken into consideration |
| (in milliseconds). Must be positive. --> |
| <integer name="config_displayWhiteBalanceColorTemperatureFilterHorizon">10000</integer> |
| |
| <!-- See AmbientFilter.WeightedMovingAverageAmbientFilter. |
| Recent changes are prioritised by integrating their duration over y = x + intercept |
| (the higher it is, the less prioritised recent changes are). Must be a non-negative |
| number, or NaN to avoid this implementation. --> |
| <item name="config_displayWhiteBalanceColorTemperatureFilterIntercept" format="float" |
| type="dimen">10.0</item> |
| |
| <!-- See DisplayWhiteBalanceThrottler. |
| The debounce time (in milliseconds) for increasing the screen color temperature, throttled |
| if time > lastTime + debounce. Must be non-negative. --> |
| <integer name="config_displayWhiteBalanceIncreaseDebounce">5000</integer> |
| |
| <!-- See DisplayWhiteBalanceThrottler. |
| The debounce time (in milliseconds) for decreasing the screen color tempearture, throttled |
| if time < lastTime - debounce. Must be non-negative. --> |
| <integer name="config_displayWhiteBalanceDecreaseDebounce">5000</integer> |
| |
| <!-- See DisplayWhiteBalanceThrottler. |
| The ambient color temperature values used to determine the threshold as the corresponding |
| value in config_displayWhiteBalance{Increase,Decrease}Threholds. Must be non-empty, the |
| same length as config_displayWhiteBalance{Increase,Decrease}Thresholds, and contain |
| non-negative, strictly increasing numbers. |
| |
| For example, if: |
| |
| - baseThresolds = [0, 100, 1000]; |
| - increaseThresholds = [0.1, 0.15, 0.2]; |
| - decreaseThresholds = [0.1, 0.05, 0.0]; |
| |
| Then, given the ambient color temperature INCREASED from X to Y (so X < Y): |
| - If 0 <= Y < 100, we require Y > (1 + 0.1) * X = 1.1X; |
| - If 100 <= Y < 1000, we require Y > (1 + 0.15) * X = 1.15X; |
| - If 1000 <= Y, we require Y > (1 + 0.2) * X = 1.2X. |
| |
| Or, if the ambient color temperature DECREASED from X to Y (so X > Y): |
| - If 0 <= Y < 100, we require Y < (1 - 0.1) * X = 0.9X; |
| - If 100 <= Y < 1000, we require Y < (1 - 0.05) * X = 0.95X; |
| - If 1000 <= Y, we require Y < (1 - 0) * X = X. |
| |
| NOTE: the numbers in this example are made up, and don't represent how actual base, |
| increase or decrease thresholds would look like. --> |
| <array name="config_displayWhiteBalanceBaseThresholds"> |
| <item>0.0</item> |
| </array> |
| |
| <!-- See DisplayWhiteBalanceThrottler. |
| The increase threshold values, throttled if value < value * (1 + threshold). Must be |
| non-empty, the same length as config_displayWhiteBalanceBaseThresholds, and contain |
| non-negative numbers. --> |
| <array name="config_displayWhiteBalanceIncreaseThresholds"> |
| <item>0.1</item> |
| </array> |
| |
| <!-- See DisplayWhiteBalanceThrottler. |
| The decrease threshold values, throttled if value > value * (1 - threshold). Must be |
| non-empty, the same length as config_displayWhiteBalanceBaseThresholds, and contain |
| non-negative numbers. --> |
| <array name="config_displayWhiteBalanceDecreaseThresholds"> |
| <item>0.1</item> |
| </array> |
| |
| <!-- See DisplayWhiteBalanceController. |
| A float array containing a list of ambient brightnesses, in Lux. This array, |
| together with config_displayWhiteBalanceLowLightAmbientBiases, is used to generate a |
| lookup table used in DisplayWhiteBalanceController. This lookup table is used to map |
| ambient brightness readings to a bias, where the bias is used to linearly interpolate |
| between ambient color temperature and |
| config_displayWhiteBalanceLowLightAmbientColorTemperature. |
| This table is optional. If used, this array must, |
| 1) Contain at least two entries |
| 2) Be the same length as config_displayWhiteBalanceLowLightAmbientBiases. --> |
| <array name ="config_displayWhiteBalanceLowLightAmbientBrightnesses"> |
| <item>10.0</item> |
| <item>10.0</item> |
| </array> |
| |
| <!-- See DisplayWhiteBalanceController. |
| An array containing a list of biases. See |
| config_displayWhiteBalanceLowLightAmbientBrightnesses for additional details. |
| This array must be in the range of [0.0, 1.0]. --> |
| <array name ="config_displayWhiteBalanceLowLightAmbientBiases"> |
| <item>0.0</item> |
| <item>1.0</item> |
| </array> |
| |
| <!-- See DisplayWhiteBalanceController. |
| The ambient color temperature (in cct) to which we interpolate towards using the |
| the look up table generated by config_displayWhiteBalanceLowLightAmbientBrightnesses |
| and config_displayWhiteBalanceLowLightAmbientBiases. --> |
| <item name="config_displayWhiteBalanceLowLightAmbientColorTemperature" format="float" type="dimen">6500.0</item> |
| |
| <!-- See DisplayWhiteBalanceController. |
| A float array containing a list of ambient brightnesses, in Lux. This array, |
| together with config_displayWhiteBalanceHighLightAmbientBiases, is used to generate a |
| lookup table used in DisplayWhiteBalanceController. This lookup table is used to map |
| ambient brightness readings to a bias, where the bias is used to linearly interpolate |
| between ambient color temperature and |
| config_displayWhiteBalanceHighLightAmbientColorTemperature. |
| This table is optional. If used, this array must, |
| 1) Contain at least two entries |
| 2) Be the same length as config_displayWhiteBalanceHighLightAmbientBiases. --> |
| <array name ="config_displayWhiteBalanceHighLightAmbientBrightnesses"> |
| </array> |
| |
| <!-- See DisplayWhiteBalanceController. |
| An array containing a list of biases. See |
| config_displayWhiteBalanceHighLightAmbientBrightnesses for additional details. |
| This array must be in the range of [0.0, 1.0]. --> |
| <array name ="config_displayWhiteBalanceHighLightAmbientBiases"> |
| </array> |
| |
| <!-- See DisplayWhiteBalanceController. |
| The ambient color temperature (in cct) to which we interpolate towards using the |
| the look up table generated by config_displayWhiteBalanceHighLightAmbientBrightnesses |
| and config_displayWhiteBalanceHighLightAmbientBiases. --> |
| <item name="config_displayWhiteBalanceHighLightAmbientColorTemperature" format="float" type="dimen">8000.0</item> |
| |
| <!-- See DisplayWhiteBalanceController. |
| A float array containing a list of ambient color temperatures, in Kelvin. This array, |
| together with config_displayWhiteBalanceDisplayColorTemperatures, is used to generate a |
| lookup table used in DisplayWhiteBalanceController. This lookup table is used to map |
| ambient color temperature readings to a target color temperature for the display. |
| This table is optional. If used, this array must, |
| 1) Contain at least two entries |
| 2) Be the same length as config_displayWhiteBalanceDisplayColorTemperatures. --> |
| <array name="config_displayWhiteBalanceAmbientColorTemperatures"> |
| </array> |
| |
| <!-- See DisplayWhiteBalanceController. |
| An array containing a list of display color temperatures, in Kelvin. See |
| config_displayWhiteBalanceAmbientColorTemperatures for additional details. |
| The same restrictions apply to this array. --> |
| <array name="config_displayWhiteBalanceDisplayColorTemperatures"> |
| </array> |
| |
| <!-- See DisplayWhiteBalanceController. |
| The same as config_displayWhiteBalanceAmbientColorTemperatures, but with a stronger |
| visual adjustment. --> |
| <array name="config_displayWhiteBalanceStrongAmbientColorTemperatures"> |
| </array> |
| |
| <!-- See DisplayWhiteBalanceController. |
| The same as config_displayWhiteBalanceDisplayColorTemperatures, but with a stronger |
| visual adjustment. --> |
| <array name="config_displayWhiteBalanceStrongDisplayColorTemperatures"> |
| </array> |
| |
| <!-- All of the paths defined for the batterymeter are defined on a 12x20 canvas, and must |
| be parsable by android.utill.PathParser --> |
| <string name="config_batterymeterPerimeterPath" translatable="false"> |
| M3.5,2 v0 H1.33 C0.6,2 0,2.6 0,3.33 V13v5.67 C0,19.4 0.6,20 1.33,20 h9.33 C11.4,20 12,19.4 12,18.67 V13V3.33 C12,2.6 11.4,2 10.67,2 H8.5 V0 H3.5 z M2,18v-7V4h8v9v5H2L2,18z |
| </string> |
| <string name="config_batterymeterErrorPerimeterPath" translatable="false">@string/config_batterymeterPerimeterPath</string> |
| <string name="config_batterymeterFillMask" translatable="false"> |
| M2,18 v-14 h8 v14 z |
| </string> |
| <string name="config_batterymeterBoltPath" translatable="false"> |
| M5,17.5 V12 H3 L7,4.5 V10 h2 L5,17.5 z |
| </string> |
| <string name="config_batterymeterPowersavePath" translatable="false"> |
| M9,10l-2,0l0,-2l-2,0l0,2l-2,0l0,2l2,0l0,2l2,0l0,-2l2,0z |
| </string> |
| |
| <!-- Attribution path for SignalDrawable as defined on a 24x24 canvas. --> |
| <string name="config_signalAttributionPath" translatable="false"> |
| M20,10h2v8h-2z M20,20h2v2h-2z |
| </string> |
| <!-- config_signalCutout{Height,Width}Fraction define fraction of the 24x24 canvas that |
| should be cut out to display config_signalAttributionPath. --> |
| <item name="config_signalCutoutWidthFraction" format="float" type="dimen">7</item> |
| <item name="config_signalCutoutHeightFraction" format="float" type="dimen">17</item> |
| |
| <!-- A dual tone battery meter draws the perimeter path twice - once to define the shape |
| and a second time clipped to the fill level to indicate charge --> |
| <bool name="config_batterymeterDualTone">false</bool> |
| |
| <!-- The default refresh rate for a given device. Change this value to set a higher default |
| refresh rate. If the hardware composer on the device supports display modes with a higher |
| refresh rate than the default value specified here, the framework may use those higher |
| refresh rate modes if an app chooses one by setting preferredDisplayModeId or calling |
| setFrameRate(). |
| If a non-zero value is set for config_defaultPeakRefreshRate, then |
| config_defaultRefreshRate may be set to 0, in which case the value set for |
| config_defaultPeakRefreshRate will act as the default frame rate. --> |
| <integer name="config_defaultRefreshRate">60</integer> |
| |
| <!-- The default peak refresh rate for a given device. Change this value if you want to prevent |
| the framework from using higher refresh rates, even if display modes with higher refresh |
| rates are available from hardware composer. Only has an effect if the value is |
| non-zero. --> |
| <integer name="config_defaultPeakRefreshRate">0</integer> |
| |
| <!-- The display uses different gamma curves for different refresh rates. It's hard for panel |
| vendor to tune the curves to have exact same brightness for different refresh rate. So |
| flicker could be observed at switch time. The issue is worse at the gamma lower end. |
| In addition, human eyes are more sensitive to the flicker at darker environment. |
| To prevent flicker, we only support higher refresh rates if the display brightness is above |
| a threshold. And the darker environment could have higher threshold. |
| For example, no higher refresh rate if |
| display brightness <= disp0 && ambient brightness <= amb0 |
| || display brightness <= disp1 && ambient brightness <= amb1 --> |
| <integer-array translatable="false" name="config_brightnessThresholdsOfPeakRefreshRate"> |
| <!-- |
| <item>disp0</item> |
| <item>disp1</item> |
| --> |
| </integer-array> |
| <integer-array translatable="false" name="config_ambientThresholdsOfPeakRefreshRate"> |
| <!-- |
| <item>amb0</item> |
| <item>amb1</item> |
| --> |
| </integer-array> |
| |
| <!-- Default refresh rate in the zone defined by brightness and ambient thresholds. |
| If non-positive, then the refresh rate is unchanged even if thresholds are configured. --> |
| <integer name="config_defaultRefreshRateInZone">0</integer> |
| |
| <!-- The display uses different gamma curves for different refresh rates. It's hard for panel |
| vendor to tune the curves to have exact same brightness for different refresh rate. So |
| flicker could be observed at switch time. The issue can be observed on the screen with |
| even full white content at the high brightness. To prevent flickering, we support fixed |
| refresh rates if the display and ambient brightness are equal to or above the provided |
| thresholds. You can define multiple threshold levels as higher brightness environments |
| may have lower display brightness requirements for the flickering is visible. And the |
| high brightness environment could have higher threshold. |
| For example, fixed refresh rate if |
| display brightness >= disp0 && ambient brightness >= amb0 |
| || display brightness >= disp1 && ambient brightness >= amb1 --> |
| <integer-array translatable="false" name="config_highDisplayBrightnessThresholdsOfFixedRefreshRate"> |
| <!-- |
| <item>disp0</item> |
| <item>disp1</item> |
| --> |
| </integer-array> |
| |
| <integer-array translatable="false" name="config_highAmbientBrightnessThresholdsOfFixedRefreshRate"> |
| <!-- |
| <item>amb0</item> |
| <item>amb1</item> |
| --> |
| </integer-array> |
| |
| <!-- Default refresh rate in the high zone defined by brightness and ambient thresholds. |
| If non-positive, then the refresh rate is unchanged even if thresholds are configured. --> |
| <integer name="config_fixedRefreshRateInHighZone">0</integer> |
| |
| <!-- Default refresh rate while the device has high brightness mode enabled for Sunlight. |
| This value overrides values from DisplayDeviceConfig --> |
| <integer name="config_defaultRefreshRateInHbmSunlight">0</integer> |
| |
| <!-- Default refresh rate while the device has high brightness mode enabled for HDR. --> |
| <integer name="config_defaultRefreshRateInHbmHdr">0</integer> |
| |
| <!-- The type of the light sensor to be used by the display framework for things like |
| auto-brightness. If unset, then it just gets the default sensor of type TYPE_LIGHT. --> |
| <string name="config_displayLightSensorType" translatable="false" /> |
| |
| <!-- Whether or not to enable automatic heap dumps for the system server on debuggable builds. --> |
| <bool name="config_debugEnableAutomaticSystemServerHeapDumps">false</bool> |
| |
| <!-- Trigger a heap dump if the system server pss usage exceeds this threshold. 400 MB --> |
| <integer name="config_debugSystemServerPssThresholdBytes">419430400</integer> |
| |
| <!-- See DropBoxManagerService. |
| The minimum period in milliseconds between broadcasts for entries with low priority |
| dropbox tags. --> |
| <integer name="config_dropboxLowPriorityBroadcastRateLimitPeriod">2000</integer> |
| |
| <!-- See DropBoxManagerService. |
| An array of dropbox entry tags to marked as low priority. Low priority broadcasts will be |
| rated limited to a period defined by config_dropboxLowPriorityBroadcastRateLimitPeriod |
| (high frequency broadcasts for the tag will be dropped) --> |
| <string-array name="config_dropboxLowPriorityTags" translatable="false"> |
| <item>data_app_strictmode</item> |
| <item>data_app_wtf</item> |
| <item>keymaster</item> |
| <item>netstats</item> |
| <item>system_app_strictmode</item> |
| <item>system_app_wtf</item> |
| <item>system_server_strictmode</item> |
| <item>system_server_wtf</item> |
| </string-array> |
| |
| <!-- Which binder services to include in incident reports containing restricted images. --> |
| <string-array name="config_restrictedImagesServices" translatable="false"/> |
| |
| <string name="config_biometric_prompt_ui_package">com.android.systemui</string> |
| <!-- List of biometric sensors on the device, in decreasing strength. Consumed by AuthService |
| when registering authenticators with BiometricService. Format must be ID:Modality:Strength, |
| where: IDs are unique per device, Modality as defined in BiometricAuthenticator.java, |
| and Strength as defined in Authenticators.java --> |
| <string-array name="config_biometric_sensors" translatable="false" > |
| <!-- <item>0:2:15</item> ID0:Fingerprint:Strong --> |
| </string-array> |
| <!--If true, allows the device to load udfps components on older HIDL implementations --> |
| <bool name="allow_test_udfps" translatable="false" >false</bool> |
| |
| <!-- The properties of a UDFPS sensor in pixels, in the order listed below: --> |
| <integer-array name="config_udfps_sensor_props" translatable="false" > |
| <!-- |
| <item>sensorLocationX</item> |
| <item>sensorLocationY</item> |
| <item>sensorRadius</item> |
| --> |
| </integer-array> |
| |
| <!-- An array of arrays of side fingerprint sensor properties relative to each display. |
| Note: this value is temporary and is expected to be queried directly |
| from the HAL in the future. --> |
| <array name="config_sfps_sensor_props" translatable="false"> |
| <!-- |
| <array> |
| <item>displayId</item> |
| <item>sensorLocationX</item> |
| <item>sensorLocationY</item> |
| <item>sensorRadius</item> |
| <array> |
| --> |
| </array> |
| |
| <!-- How long it takes for the HW to start illuminating after the illumination is requested. --> |
| <integer name="config_udfps_illumination_transition_ms">50</integer> |
| |
| <!-- Indicates whether device has a power button fingerprint sensor. --> |
| <bool name="config_is_powerbutton_fps" translatable="false" >false</bool> |
| |
| <!-- When each intermediate UDFPS enroll stage ends, as a fraction of total progress. --> |
| <string-array name="config_udfps_enroll_stage_thresholds" translatable="false"> |
| <item>0.25</item> |
| <item>0.5</item> |
| <item>0.75</item> |
| <item>0.875</item> |
| </string-array> |
| |
| <!-- Messages that should not be shown to the user during face auth enrollment. This should be |
| used to hide messages that may be too chatty or messages that the user can't do much about. |
| Entries are defined in android.hardware.biometrics.face@1.0 types.hal --> |
| <integer-array name="config_face_acquire_enroll_ignorelist" translatable="false" > |
| </integer-array> |
| <!-- Same as the above, but are defined by vendorCodes --> |
| <integer-array name="config_face_acquire_vendor_enroll_ignorelist" translatable="false" > |
| </integer-array> |
| |
| <!-- Messages that should not be shown to the user during face authentication, on keyguard. |
| This includes both lockscreen and bouncer. This should be used to hide messages that may be |
| too chatty or messages that the user can't do much about. Entries are defined in |
| android.hardware.biometrics.face@1.0 types.hal --> |
| <integer-array name="config_face_acquire_keyguard_ignorelist" translatable="false" > |
| </integer-array> |
| <!-- Same as the above, but are defined by vendorCodes --> |
| <integer-array name="config_face_acquire_vendor_keyguard_ignorelist" translatable="false" > |
| </integer-array> |
| |
| <!-- Messages that should not be shown to the user during face authentication, on |
| BiometricPrompt. This should be used to hide messages that may be too chatty or messages |
| that the user can't do much about. Entries are defined in |
| android.hardware.biometrics.face@1.0 types.hal --> |
| <integer-array name="config_face_acquire_biometricprompt_ignorelist" translatable="false" > |
| </integer-array> |
| <!-- Same as the above, but are defined by vendorCodes --> |
| <integer-array name="config_face_acquire_vendor_biometricprompt_ignorelist" translatable="false" > |
| </integer-array> |
| |
| <!-- True if the sensor is able to provide self illumination in dark secnarios, without support |
| from above the HAL. This configuration is only applicable to IBiometricsFace@1.0 and its |
| minor revisions. --> |
| <bool name="config_faceAuthSupportsSelfIllumination">true</bool> |
| |
| <!-- If face auth sends the user directly to home/last open app, or stays on keyguard --> |
| <bool name="config_faceAuthDismissesKeyguard">true</bool> |
| |
| <!-- The component name for the default profile supervisor, which can be set as a profile owner |
| even after user setup is complete. The defined component should be used for supervision purposes |
| only. The component must be part of a system app. --> |
| <string name="config_defaultSupervisionProfileOwnerComponent" translatable="false"></string> |
| |
| <!-- The package name of the default supervision package. --> |
| <string name="config_systemSupervision" translatable="false"></string> |
| |
| <!-- Trigger a warning for notifications with RemoteView objects that are larger in bytes than |
| this value (default 1MB)--> |
| <integer name="config_notificationWarnRemoteViewSizeBytes">2000000</integer> |
| |
| <!-- Strip notification RemoteView objects that are larger in bytes than this value (also log) |
| (default 2MB) --> |
| <integer name="config_notificationStripRemoteViewSizeBytes">5000000</integer> |
| |
| <!-- List of packages that can use the Conversation space for their category messages |
| notifications until they target R --> |
| <string-array name="config_notificationMsgPkgsAllowedAsConvos" translatable="false"/> |
| |
| <!-- Sharesheet: define a max number of targets per application for new shortcuts-based direct share introduced in Q --> |
| <integer name="config_maxShortcutTargetsPerApp">3</integer> |
| |
| <!-- The package name for the vendor implementation of ACTION_FACTORY_RESET. For some vendors, |
| the default implementation of ACTION_FACTORY_RESET does not work, so it is needed to re-route |
| this intent to this package. This is being used in MasterClearReceiver.java. --> |
| <string name="config_factoryResetPackage" translatable="false"></string> |
| |
| <!-- The list of packages to automatically opt out of refresh rates higher than 60hz because |
| of known compatibility issues. --> |
| <string-array name="config_highRefreshRateBlacklist"></string-array> |
| |
| <!-- Whether or not to hide the navigation bar when the soft keyboard is visible in order to |
| create additional screen real estate outside beyond the keyboard. Note that the user needs |
| to have a confirmed way to dismiss the keyboard when desired. --> |
| <bool name="config_automotiveHideNavBarForKeyboard">false</bool> |
| |
| <!-- Whether or not to show the built-in charging animation when the device begins charging |
| wirelessly. --> |
| <bool name="config_showBuiltinWirelessChargingAnim">true</bool> |
| |
| <!-- A list of potential packages, in priority order, that can supply rules to |
| AppIntegrityManager. These need to be apps on the system partition. --> |
| <string-array name="config_integrityRuleProviderPackages" translatable="false"> |
| <!-- Add packages here --> |
| </string-array> |
| |
| <!-- Whether or not wcg (wide color gamut) should be enabled on this device, |
| we only enabled it while the device has ability of mixed color spaces composition --> |
| <bool name="config_enableWcgMode">false</bool> |
| |
| <!-- When true, enables the allowlisted app to handle bug reports from power menu short press. --> |
| <bool name="config_bugReportHandlerEnabled">false</bool> |
| |
| <!-- The package name for the default bug report handler app from power menu short press. This app must be allowlisted. --> |
| <string name="config_defaultBugReportHandlerApp" translatable="false"></string> |
| |
| <!-- When true, enables the allowlisted app to upload profcollect reports. --> |
| <bool name="config_profcollectReportUploaderEnabled">false</bool> |
| |
| <!-- The package name for the default profcollect report uploader app. This app must be allowlisted. --> |
| <string name="config_defaultProfcollectReportUploaderApp" translatable="false"></string> |
| |
| <!-- The action name for the default profcollect report uploader app. --> |
| <string name="config_defaultProfcollectReportUploaderAction" translatable="false"></string> |
| |
| <!-- The default value used for RawContacts.ACCOUNT_NAME when contacts are inserted without this |
| column set. These contacts are stored locally on the device and will not be removed even |
| if no android.account.Account with this name exists. A null string will be used if the |
| value is left empty. When this is non-empty then config_rawContactsLocalAccountType |
| should also be non-empty. --> |
| <string name="config_rawContactsLocalAccountName" translatable="false"></string> |
| |
| <!-- The default value used for RawContacts.ACCOUNT_TYPE when contacts are inserted without this |
| column set. These contacts are stored locally on the device and will not be removed even |
| if no android.account.Account with this type exists. A null string will be used if the |
| value is left empty. When this is non-empty then config_rawContactsLocalAccountName |
| should also be non-empty.--> |
| <string name="config_rawContactsLocalAccountType" translatable="false"></string> |
| |
| <!-- Whether or not to use assistant stream volume separately from music volume --> |
| <bool name="config_useAssistantVolume">false</bool> |
| |
| <!-- Whether to use a custom Bugreport handling. When true, ACTION_CUSTOM_BUGREPORT_REQUESTED |
| intent is broadcasted on bugreporting chord (instead of the default full bugreport |
| generation). --> |
| <bool name="config_customBugreport">false</bool> |
| |
| <!-- Names of packages that should not be suspended when personal use is blocked by policy. --> |
| <string-array name="config_packagesExemptFromSuspension" translatable="false"> |
| <!-- Add packages here, example: --> |
| <!-- <item>com.android.settings</item> --> |
| </string-array> |
| |
| |
| <!-- Class name of the custom country detector to be used. --> |
| <string name="config_customCountryDetector" translatable="false">com.android.server.location.ComprehensiveCountryDetector</string> |
| |
| <!-- Package name of the required service extension package. --> |
| <string name="config_servicesExtensionPackage" translatable="false">android.ext.services</string> |
| |
| <!-- Retention policy: number of records to kept for the historical exit info per package. --> |
| <integer name="config_app_exit_info_history_list_size">16</integer> |
| |
| <!-- Packages that can't be killed even if it's requested to be killed on imperceptible --> |
| <string-array name="config_defaultImperceptibleKillingExemptionPkgs" translatable="false" /> |
| |
| <!-- Proc States that can't be killed even if it's requested to be killed on imperceptible --> |
| <integer-array name="config_defaultImperceptibleKillingExemptionProcStates"> |
| <item>0</item> <!-- PROCESS_STATE_PERSISTENT --> |
| <item>1</item> <!-- PROCESS_STATE_PERSISTENT_UI --> |
| <item>2</item> <!-- PROCESS_STATE_TOP --> |
| <item>4</item> <!-- PROCESS_STATE_FOREGROUND_SERVICE --> |
| <item>12</item> <!-- PROCESS_STATE_TOP_SLEEPING --> |
| </integer-array> |
| |
| <!-- Component name that accepts ACTION_SEND intents for nearby (proximity-based) sharing. |
| Used by ChooserActivity. --> |
| <string translatable="false" name="config_defaultNearbySharingComponent"></string> |
| |
| <!-- URI used for Nearby Share SliceProvider scanning. --> |
| <string translatable="false" name="config_defaultNearbySharingSliceUri"></string> |
| |
| <!-- Component name that accepts settings intents for saved devices. |
| Used by FastPairSettingsFragment. --> |
| <string translatable="false" name="config_defaultNearbyFastPairSettingsDevicesComponent"></string> |
| |
| <!-- Boolean indicating whether frameworks needs to reset cell broadcast geo-fencing |
| check after reboot or airplane mode toggling --> |
| <bool translatable="false" name="reset_geo_fencing_check_after_boot_or_apm">false</bool> |
| |
| <!-- Boolean indicating whether all CB messages should be disabled on this device. This config |
| is intended to be used by OEMs who need to disable CB messages for regulatory requirements, |
| (e.g. the device is a tablet in a country where tablets should not receive CB messages) --> |
| <bool translatable="false" name="config_disable_all_cb_messages">false</bool> |
| |
| <!-- Screen Wake Keys |
| Determines whether the specified key groups can be used to wake up the device. --> |
| <bool name="config_wakeOnDpadKeyPress">true</bool> |
| <bool name="config_wakeOnAssistKeyPress">true</bool> |
| <bool name="config_wakeOnBackKeyPress">true</bool> |
| |
| <!-- Whether to default to an expanded list of users on the lock screen user switcher. --> |
| <bool name="config_expandLockScreenUserSwitcher">false</bool> |
| |
| <!-- Toasts posted from these packages will be shown to the current user, regardless of the user |
| the process belongs to. This is useful for packages that run under a single user but serve |
| multiple users, e.g. the system. |
| These packages MUST be able to add flag SYSTEM_FLAG_SHOW_FOR_ALL_USERS to a window. --> |
| <string-array name="config_toastCrossUserPackages" translatable="false"> |
| <item>android</item> |
| <item>com.android.systemui</item> |
| </string-array> |
| |
| <!-- Component name of custom media key dispatcher class used by MediaSessionService. --> |
| <string name="config_customMediaKeyDispatcher"></string> |
| |
| <!-- Component name of custom media session policy provider class used by |
| MediaSessionService. --> |
| <string name="config_customMediaSessionPolicyProvider"></string> |
| |
| <!-- The min scale for the wallpaper when it's zoomed out --> |
| <item name="config_wallpaperMinScale" format="float" type="dimen">1</item> |
| |
| <!-- The max scale for the wallpaper when it's zoomed in --> |
| <item name="config_wallpaperMaxScale" format="float" type="dimen">1.10</item> |
| |
| <!-- If true, the wallpaper will scale regardless of the value of shouldZoomOutWallpaper() --> |
| <bool name="config_alwaysScaleWallpaper">false</bool> |
| |
| <!-- Package name that will receive an explicit manifest broadcast for |
| android.os.action.POWER_SAVE_MODE_CHANGED. --> |
| <string name="config_powerSaveModeChangedListenerPackage" translatable="false"></string> |
| |
| <!-- Set to true to enable the user switcher on the keyguard. --> |
| <bool name="config_keyguardUserSwitcher">false</bool> |
| |
| <!-- If true, show multiuser switcher by default unless the user specifically disables it. --> |
| <bool name="config_showUserSwitcherByDefault">false</bool> |
| |
| <!-- Set to true to make assistant show in front of the dream/screensaver. --> |
| <bool name="config_assistantOnTopOfDream">false</bool> |
| |
| <!-- pdp data retry for cause 29, 33 and 55 --> |
| <bool name="config_pdp_reject_enable_retry">false</bool> |
| <!-- pdp data reject retry delay in ms --> |
| <integer name="config_pdp_reject_retry_delay_ms">-1</integer> |
| |
| <!-- Duration in milliseconds for device to vibrate on mash press on power |
| button. --> |
| <integer name="config_mashPressVibrateTimeOnPowerButton">0</integer> |
| |
| <!-- Whether or not to enable the binder heavy hitter watcher by default --> |
| <bool name="config_defaultBinderHeavyHitterWatcherEnabled">false</bool> |
| |
| <!-- The default batch size for the binder heavy hitter watcher --> |
| <integer name="config_defaultBinderHeavyHitterWatcherBatchSize">2000</integer> |
| |
| <!-- The default threshold for the binder heavy hitter watcher --> |
| <item name="config_defaultBinderHeavyHitterWatcherThreshold" format="float" type="dimen"> |
| 0.333 |
| </item> |
| |
| <!-- Whether or not to enable the binder heavy hitter auto sampler by default --> |
| <bool name="config_defaultBinderHeavyHitterAutoSamplerEnabled">false</bool> |
| |
| <!-- The default batch size for the binder heavy hitter auto sampler --> |
| <integer name="config_defaultBinderHeavyHitterAutoSamplerBatchSize">400</integer> |
| |
| <!-- The default threshold for the binder heavy hitter auto sampler --> |
| <item name="config_defaultBinderHeavyHitterAutoSamplerThreshold" format="float" type="dimen"> |
| 0.333 |
| </item> |
| |
| <!-- Component names of the services which will keep critical code path warm --> |
| <string-array name="config_keep_warming_services" translatable="false" /> |
| |
| <!-- WindowsManager JetPack display features --> |
| <string name="config_display_features" translatable="false" /> |
| |
| <!-- Map of System DeviceState supplied by DeviceStateManager to WM Jetpack posture. Must be in |
| the format [System DeviceState]:[WM Jetpack Posture], for example: "0:1". --> |
| <string-array name="config_device_state_postures" translatable="false" /> |
| |
| <!-- Aspect ratio of letterboxing for fixed orientation. Values <= 1.0 will be ignored. |
| Note: Activity min/max aspect ratio restrictions will still be respected. |
| Therefore this override can control the maximum screen area that can be occupied by |
| the app in the letterbox mode. --> |
| <item name="config_fixedOrientationLetterboxAspectRatio" format="float" type="dimen">0.0</item> |
| |
| <!-- Corners radius for activity presented the letterbox mode. Values < 0 enable rounded |
| corners with radius equal to min between device bottom corner radii. Default 0 value turns |
| off rounded corners logic in LetterboxUiController. --> |
| <integer name="config_letterboxActivityCornersRadius">0</integer> |
| |
| <!-- Blur radius for the Option 3 in R.integer.config_letterboxBackgroundType. Values < 0 are |
| ignored and 0 is used. --> |
| <dimen name="config_letterboxBackgroundWallpaperBlurRadius">31dp</dimen> |
| |
| <!-- Alpha of a black translucent scrim showed over wallpaper letterbox background when |
| the Option 3 is selected for R.integer.config_letterboxBackgroundType. |
| Values < 0 or >= 1 are ignored and 0.0 (transparent) is used instead. --> |
| <item name="config_letterboxBackgroundWallaperDarkScrimAlpha" format="float" type="dimen"> |
| 0.5 |
| </item> |
| |
| <!-- Corners appearance of the letterbox background. |
| 0 - Solid background using color specified in R.color.config_letterboxBackgroundColor. |
| 1 - Color specified in R.attr.colorBackground for the letterboxed application. |
| 2 - Color specified in R.attr.colorBackgroundFloating for the letterboxed application. |
| 3 - Wallpaper with dimmed with blur or/and dark scrim. At least one of the following |
| parameters should be > 0: config_letterboxBackgroundWallpaperBlurRadius, |
| config_letterboxBackgroundWallaperDarkScrimAlpha. If it's not the case or blur radius |
| provided but blur isn't supported by the device and this option |
| is selected then implementation will default to option 0. |
| If given value is outside of this range, the option 0 will be assummed. --> |
| <integer name="config_letterboxBackgroundType">0</integer> |
| |
| <!-- Color of the letterbox background if one following conditions is true |
| - Option 0 is selected for R.integer.config_letterboxBackgroundType. |
| - Option 1 is selected for R.integer.config_letterboxBackgroundType and |
| R.attr.colorBackground isn't specified for the app. |
| - Option 2 is selected for R.integer.config_letterboxBackgroundType and |
| R.attr.colorBackgroundFloating isn't specified for the app. |
| - Option 3 is selected for R.integer.config_letterboxBackgroundType and blur requested |
| but isn't supported on the device or both dark scrim alpha and blur radius aren't |
| provided. |
| --> |
| <color name="config_letterboxBackgroundColor">@android:color/system_neutral2_900</color> |
| |
| <!-- Horizonal position of a center of the letterboxed app window. |
| 0 corresponds to the left side of the screen and 1 to the right side. If given value < 0 |
| or > 1, it is ignored and central positionis used (0.5). --> |
| <item name="config_letterboxHorizontalPositionMultiplier" format="float" type="dimen">0.5</item> |
| |
| <!-- Whether reachability repositioning is allowed for letterboxed fullscreen apps in landscape |
| device orientation. --> |
| <bool name="config_letterboxIsReachabilityEnabled">false</bool> |
| |
| <!-- Default horizonal position of the letterboxed app window when reachability is |
| enabled and an app is fullscreen in landscape device orientation. When reachability is |
| enabled, the position can change between left, center and right. This config defines the |
| default one: |
| - Option 0 - Left. |
| - Option 1 - Center. |
| - Option 2 - Right. |
| If given value is outside of this range, the option 1 (center) is assummed. --> |
| <integer name="config_letterboxDefaultPositionForReachability">1</integer> |
| |
| <!-- Whether displaying letterbox education is enabled for letterboxed fullscreen apps. --> |
| <bool name="config_letterboxIsEducationEnabled">false</bool> |
| |
| <!-- Whether a camera compat controller is enabled to allow the user to apply or revert |
| treatment for stretched issues in camera viewfinder. --> |
| <bool name="config_isCameraCompatControlForStretchedIssuesEnabled">false</bool> |
| |
| <!-- If true, hide the display cutout with display area --> |
| <bool name="config_hideDisplayCutoutWithDisplayArea">false</bool> |
| |
| <!-- The timeout value in milliseconds used by SelectionActionModeHelper for each selections |
| when TextClassifier has been initialized. --> |
| <integer name="config_smartSelectionInitializedTimeoutMillis">200</integer> |
| |
| <!-- The timeout value in milliseconds used by SelectionActionModeHelper for each selections |
| when TextClassifier has not been initialized. --> |
| <integer name="config_smartSelectionInitializingTimeoutMillis">500</integer> |
| |
| <!-- The delay in milliseconds before focused Views set themselves as preferred to keep clear. |
| Set to -1 if Views should not set themselves as preferred to keep clear. --> |
| <integer name="config_preferKeepClearForFocusDelayMillis">-1</integer> |
| |
| <!-- Indicates that default fitness tracker app needs to request sensor and location permissions. --> |
| <bool name="config_trackerAppNeedsPermissions">false</bool> |
| |
| <!-- Package with global data query permissions for AppSearch --> |
| <string name="config_globalAppSearchDataQuerierPackage" translatable="false"></string> |
| |
| <!-- If true, attach the navigation bar to the app during app transition --> |
| <bool name="config_attachNavBarToAppDuringTransition">false</bool> |
| |
| <!-- Flag indicating that the media framework should play a back sound when a back-transition |
| happens that doesn't result in bringing the home task to the front. |
| This is currently only used on TV. --> |
| <bool name="config_enableBackSound">false</bool> |
| |
| <!-- Chooser image editing activity. Must handle ACTION_EDIT image/png intents. |
| If omitted, image editing will not be offered via Chooser. |
| This name is in the ComponentName flattened format (package/class) [DO NOT TRANSLATE] --> |
| <string name="config_systemImageEditor" translatable="false"></string> |
| |
| <!-- Whether to force WindowOrientationListener to keep listening to its sensor, even when |
| dreaming. This allows the AoD to rotate on devices without a wake device_orientation |
| sensor. Note that this flag should only be enabled for development/testing use. --> |
| <bool name="config_forceOrientationListenerEnabledWhileDreaming">false</bool> |
| |
| <!-- Whether the device enable the standalone (SA) mode of 5G NR.--> |
| <bool name="config_telephony5gStandalone">false</bool> |
| <!-- Whether the device enable the non-standalone (NSA) mode of 5G NR.--> |
| <bool name="config_telephony5gNonStandalone">false</bool> |
| |
| <!-- Whether to select voice/data/sms preference without user confirmation --> |
| <bool name="config_voice_data_sms_auto_fallback">false</bool> |
| |
| <!-- Whether to allow the caching of the SIM PIN for verification after unattended reboot --> |
| <bool name="config_allow_pin_storage_for_unattended_reboot">true</bool> |
| |
| <!-- CEC Configuration --> |
| <bool name="config_cecHdmiCecEnabled_userConfigurable">true</bool> |
| <bool name="config_cecHdmiCecControlEnabled_allowed">true</bool> |
| <bool name="config_cecHdmiCecControlEnabled_default">true</bool> |
| <bool name="config_cecHdmiCecControlDisabled_allowed">true</bool> |
| <bool name="config_cecHdmiCecControlDisabled_default">false</bool> |
| |
| <bool name="config_cecHdmiCecVersion_userConfigurable">true</bool> |
| <bool name="config_cecHdmiCecVersion14b_allowed">true</bool> |
| <bool name="config_cecHdmiCecVersion14b_default">false</bool> |
| <bool name="config_cecHdmiCecVersion20_allowed">true</bool> |
| <bool name="config_cecHdmiCecVersion20_default">true</bool> |
| |
| <bool name="config_cecRoutingControl_userConfigurable">true</bool> |
| <bool name="config_cecRoutingControlEnabled_allowed">true</bool> |
| <bool name="config_cecRoutingControlEnabled_default">false</bool> |
| <bool name="config_cecRoutingControlDisabled_allowed">true</bool> |
| <bool name="config_cecRoutingControlDisabled_default">true</bool> |
| |
| <bool name="config_cecPowerControlMode_userConfigurable">true</bool> |
| <bool name="config_cecPowerControlModeTv_allowed">true</bool> |
| <bool name="config_cecPowerControlModeTv_default">false</bool> |
| <bool name="config_cecPowerControlModeTvAndAudioSystem_allowed">true</bool> |
| <bool name="config_cecPowerControlModeTvAndAudioSystem_default">true</bool> |
| <bool name="config_cecPowerControlModeBroadcast_allowed">true</bool> |
| <bool name="config_cecPowerControlModeBroadcast_default">false</bool> |
| <bool name="config_cecPowerControlModeNone_allowed">true</bool> |
| <bool name="config_cecPowerControlModeNone_default">false</bool> |
| |
| <bool name="config_cecPowerStateChangeOnActiveSourceLost_userConfigurable">true</bool> |
| <bool name="config_cecPowerStateChangeOnActiveSourceLostNone_allowed">true</bool> |
| <bool name="config_cecPowerStateChangeOnActiveSourceLostNone_default">false</bool> |
| <bool name="config_cecPowerStateChangeOnActiveSourceLostStandbyNow_allowed">true</bool> |
| <bool name="config_cecPowerStateChangeOnActiveSourceLostStandbyNow_default">true</bool> |
| |
| <bool name="config_cecSystemAudioControl_userConfigurable">true</bool> |
| <bool name="config_cecSystemAudioControlEnabled_allowed">true</bool> |
| <bool name="config_cecSystemAudioControlEnabled_default">true</bool> |
| <bool name="config_cecSystemAudioControlDisabled_allowed">true</bool> |
| <bool name="config_cecSystemAudioControlDisabled_default">false</bool> |
| |
| <bool name="config_cecSystemAudioModeMuting_userConfigurable">true</bool> |
| <bool name="config_cecSystemAudioModeMutingEnabled_allowed">true</bool> |
| <bool name="config_cecSystemAudioModeMutingEnabled_default">true</bool> |
| <bool name="config_cecSystemAudioModeMutingDisabled_allowed">true</bool> |
| <bool name="config_cecSystemAudioModeMutingDisabled_default">false</bool> |
| |
| <bool name="config_cecVolumeControlMode_userConfigurable">true</bool> |
| <bool name="config_cecVolumeControlModeEnabled_allowed">true</bool> |
| <bool name="config_cecVolumeControlModeEnabled_default">true</bool> |
| <bool name="config_cecVolumeControlModeDisabled_allowed">true</bool> |
| <bool name="config_cecVolumeControlModeDisabled_default">false</bool> |
| |
| <bool name="config_cecTvWakeOnOneTouchPlay_userConfigurable">true</bool> |
| <bool name="config_cecTvWakeOnOneTouchPlayEnabled_allowed">true</bool> |
| <bool name="config_cecTvWakeOnOneTouchPlayEnabled_default">true</bool> |
| <bool name="config_cecTvWakeOnOneTouchPlayDisabled_allowed">true</bool> |
| <bool name="config_cecTvWakeOnOneTouchPlayDisabled_default">false</bool> |
| |
| <bool name="config_cecTvSendStandbyOnSleep_userConfigurable">true</bool> |
| <bool name="config_cecTvSendStandbyOnSleepEnabled_allowed">true</bool> |
| <bool name="config_cecTvSendStandbyOnSleepEnabled_default">true</bool> |
| <bool name="config_cecTvSendStandbyOnSleepDisabled_allowed">true</bool> |
| <bool name="config_cecTvSendStandbyOnSleepDisabled_default">false</bool> |
| |
| <bool name="config_cecSetMenuLanguage_userConfigurable">true</bool> |
| <bool name="config_cecSetMenuLanguageEnabled_allowed">true</bool> |
| <bool name="config_cecSetMenuLanguageEnabled_default">true</bool> |
| <bool name="config_cecSetMenuLanguageDisabled_allowed">true</bool> |
| <bool name="config_cecSetMenuLanguageDisabled_default">false</bool> |
| |
| <bool name="config_cecRcProfileTv_userConfigurable">true</bool> |
| <bool name="config_cecRcProfileTvNone_allowed">true</bool> |
| <bool name="config_cecRcProfileTvNone_default">true</bool> |
| <bool name="config_cecRcProfileTvOne_allowed">true</bool> |
| <bool name="config_cecRcProfileTvOne_default">false</bool> |
| <bool name="config_cecRcProfileTvTwo_allowed">true</bool> |
| <bool name="config_cecRcProfileTvTwo_default">false</bool> |
| <bool name="config_cecRcProfileTvThree_allowed">true</bool> |
| <bool name="config_cecRcProfileTvThree_default">false</bool> |
| <bool name="config_cecRcProfileTvFour_allowed">true</bool> |
| <bool name="config_cecRcProfileTvFour_default">false</bool> |
| |
| <bool name="config_cecRcProfileSourceRootMenu_userConfigurable">true</bool> |
| <bool name="config_cecRcProfileSourceRootMenuHandled_allowed">true</bool> |
| <bool name="config_cecRcProfileSourceRootMenuHandled_default">true</bool> |
| <bool name="config_cecRcProfileSourceRootMenuNotHandled_allowed">true</bool> |
| <bool name="config_cecRcProfileSourceRootMenuNotHandled_default">false</bool> |
| |
| <bool name="config_cecRcProfileSourceSetupMenu_userConfigurable">true</bool> |
| <bool name="config_cecRcProfileSourceSetupMenuHandled_allowed">true</bool> |
| <bool name="config_cecRcProfileSourceSetupMenuHandled_default">true</bool> |
| <bool name="config_cecRcProfileSourceSetupMenuNotHandled_allowed">true</bool> |
| <bool name="config_cecRcProfileSourceSetupMenuNotHandled_default">false</bool> |
| |
| <bool name="config_cecRcProfileSourceContentsMenu_userConfigurable">true</bool> |
| <bool name="config_cecRcProfileSourceContentsMenuHandled_allowed">true</bool> |
| <bool name="config_cecRcProfileSourceContentsMenuHandled_default">false</bool> |
| <bool name="config_cecRcProfileSourceContentsMenuNotHandled_allowed">true</bool> |
| <bool name="config_cecRcProfileSourceContentsMenuNotHandled_default">true</bool> |
| |
| <bool name="config_cecRcProfileSourceTopMenu_userConfigurable">true</bool> |
| <bool name="config_cecRcProfileSourceTopMenuHandled_allowed">true</bool> |
| <bool name="config_cecRcProfileSourceTopMenuHandled_default">false</bool> |
| <bool name="config_cecRcProfileSourceTopMenuNotHandled_allowed">true</bool> |
| <bool name="config_cecRcProfileSourceTopMenuNotHandled_default">true</bool> |
| |
| <bool name="config_cecRcProfileSourceMediaContextSensitiveMenu_userConfigurable">true</bool> |
| <bool name="config_cecRcProfileSourceMediaContextSensitiveMenuHandled_allowed">true</bool> |
| <bool name="config_cecRcProfileSourceMediaContextSensitiveMenuHandled_default">false</bool> |
| <bool name="config_cecRcProfileSourceMediaContextSensitiveMenuNotHandled_allowed">true</bool> |
| <bool name="config_cecRcProfileSourceMediaContextSensitiveMenuNotHandled_default">true</bool> |
| |
| <!-- Which Short Audio Descriptors a TV should query via CEC --> |
| <bool name="config_cecQuerySadLpcm_userConfigurable">true</bool> |
| <bool name="config_cecQuerySadLpcmEnabled_allowed">true</bool> |
| <bool name="config_cecQuerySadLpcmEnabled_default">true</bool> |
| <bool name="config_cecQuerySadLpcmDisabled_allowed">true</bool> |
| <bool name="config_cecQuerySadLpcmDisabled_default">false</bool> |
| |
| <bool name="config_cecQuerySadDd_userConfigurable">true</bool> |
| <bool name="config_cecQuerySadDdEnabled_allowed">true</bool> |
| <bool name="config_cecQuerySadDdEnabled_default">true</bool> |
| <bool name="config_cecQuerySadDdDisabled_allowed">true</bool> |
| <bool name="config_cecQuerySadDdDisabled_default">false</bool> |
| |
| <bool name="config_cecQuerySadMpeg1_userConfigurable">true</bool> |
| <bool name="config_cecQuerySadMpeg1Enabled_allowed">true</bool> |
| <bool name="config_cecQuerySadMpeg1Enabled_default">true</bool> |
| <bool name="config_cecQuerySadMpeg1Disabled_allowed">true</bool> |
| <bool name="config_cecQuerySadMpeg1Disabled_default">false</bool> |
| |
| <bool name="config_cecQuerySadMp3_userConfigurable">true</bool> |
| <bool name="config_cecQuerySadMp3Enabled_allowed">true</bool> |
| <bool name="config_cecQuerySadMp3Enabled_default">true</bool> |
| <bool name="config_cecQuerySadMp3Disabled_allowed">true</bool> |
| <bool name="config_cecQuerySadMp3Disabled_default">false</bool> |
| |
| <bool name="config_cecQuerySadMpeg2_userConfigurable">true</bool> |
| <bool name="config_cecQuerySadMpeg2Enabled_allowed">true</bool> |
| <bool name="config_cecQuerySadMpeg2Enabled_default">true</bool> |
| <bool name="config_cecQuerySadMpeg2Disabled_allowed">true</bool> |
| <bool name="config_cecQuerySadMpeg2Disabled_default">false</bool> |
| |
| <bool name="config_cecQuerySadAac_userConfigurable">true</bool> |
| <bool name="config_cecQuerySadAacEnabled_allowed">true</bool> |
| <bool name="config_cecQuerySadAacEnabled_default">true</bool> |
| <bool name="config_cecQuerySadAacDisabled_allowed">true</bool> |
| <bool name="config_cecQuerySadAacDisabled_default">false</bool> |
| |
| <bool name="config_cecQuerySadDts_userConfigurable">true</bool> |
| <bool name="config_cecQuerySadDtsEnabled_allowed">true</bool> |
| <bool name="config_cecQuerySadDtsEnabled_default">true</bool> |
| <bool name="config_cecQuerySadDtsDisabled_allowed">true</bool> |
| <bool name="config_cecQuerySadDtsDisabled_default">false</bool> |
| |
| <bool name="config_cecQuerySadAtrac_userConfigurable">true</bool> |
| <bool name="config_cecQuerySadAtracEnabled_allowed">true</bool> |
| <bool name="config_cecQuerySadAtracEnabled_default">true</bool> |
| <bool name="config_cecQuerySadAtracDisabled_allowed">true</bool> |
| <bool name="config_cecQuerySadAtracDisabled_default">false</bool> |
| |
| <bool name="config_cecQuerySadOnebitaudio_userConfigurable">true</bool> |
| <bool name="config_cecQuerySadOnebitaudioEnabled_allowed">true</bool> |
| <bool name="config_cecQuerySadOnebitaudioEnabled_default">true</bool> |
| <bool name="config_cecQuerySadOnebitaudioDisabled_allowed">true</bool> |
| <bool name="config_cecQuerySadOnebitaudioDisabled_default">false</bool> |
| |
| <bool name="config_cecQuerySadDdp_userConfigurable">true</bool> |
| <bool name="config_cecQuerySadDdpEnabled_allowed">true</bool> |
| <bool name="config_cecQuerySadDdpEnabled_default">true</bool> |
| <bool name="config_cecQuerySadDdpDisabled_allowed">true</bool> |
| <bool name="config_cecQuerySadDdpDisabled_default">false</bool> |
| |
| <bool name="config_cecQuerySadDtshd_userConfigurable">true</bool> |
| <bool name="config_cecQuerySadDtshdEnabled_allowed">true</bool> |
| <bool name="config_cecQuerySadDtshdEnabled_default">true</bool> |
| <bool name="config_cecQuerySadDtshdDisabled_allowed">true</bool> |
| <bool name="config_cecQuerySadDtshdDisabled_default">false</bool> |
| |
| <bool name="config_cecQuerySadTruehd_userConfigurable">true</bool> |
| <bool name="config_cecQuerySadTruehdEnabled_allowed">true</bool> |
| <bool name="config_cecQuerySadTruehdEnabled_default">true</bool> |
| <bool name="config_cecQuerySadTruehdDisabled_allowed">true</bool> |
| <bool name="config_cecQuerySadTruehdDisabled_default">false</bool> |
| |
| <bool name="config_cecQuerySadDst_userConfigurable">true</bool> |
| <bool name="config_cecQuerySadDstEnabled_allowed">true</bool> |
| <bool name="config_cecQuerySadDstEnabled_default">true</bool> |
| <bool name="config_cecQuerySadDstDisabled_allowed">true</bool> |
| <bool name="config_cecQuerySadDstDisabled_default">false</bool> |
| |
| <bool name="config_cecQuerySadWmapro_userConfigurable">true</bool> |
| <bool name="config_cecQuerySadWmaproEnabled_allowed">true</bool> |
| <bool name="config_cecQuerySadWmaproEnabled_default">true</bool> |
| <bool name="config_cecQuerySadWmaproDisabled_allowed">true</bool> |
| <bool name="config_cecQuerySadWmaproDisabled_default">false</bool> |
| |
| <bool name="config_cecQuerySadMax_userConfigurable">true</bool> |
| <bool name="config_cecQuerySadMaxEnabled_allowed">true</bool> |
| <bool name="config_cecQuerySadMaxEnabled_default">true</bool> |
| <bool name="config_cecQuerySadMaxDisabled_allowed">true</bool> |
| <bool name="config_cecQuerySadMaxDisabled_default">false</bool> |
| |
| <!-- Whether app hibernation deletes OAT artifact files as part of global hibernation. --> |
| <bool name="config_hibernationDeletesOatArtifactsEnabled">true</bool> |
| |
| <!-- Package name of the on-device intelligent processor for system UI |
| features. Examples include the search functionality or the app |
| predictor. --> |
| <string name="config_systemUiIntelligence" translatable="false"></string> |
| <!-- Package name of the on-device intelligent processor for ambient audio. |
| Ambient audio is the sound surrounding the device captured by the DSP |
| or the microphone. In other words, the device is continuously |
| processing audio data in background. --> |
| <string name="config_systemAmbientAudioIntelligence" translatable="false"></string> |
| <!-- Package name of the on-device intelligent processor for audio. The |
| difference of 'ambient audio' and 'audio' is that in 'audio', the |
| user intentionally and consciously aware that the device is recording |
| or using the microphone. |
| --> |
| <string name="config_systemAudioIntelligence" translatable="false"></string> |
| <!-- Package name of the on-device intelligent processor for notification. |
| --> |
| <string name="config_systemNotificationIntelligence" translatable="false"></string> |
| <!-- Package name of the on-device intelligent processor for text. Examples |
| include providing autofill functionality based on incoming text |
| messages. --> |
| <string name="config_systemTextIntelligence" translatable="false"></string> |
| <!-- Package name of the on-device intelligent processor for visual |
| features. Examples include the autorotate feature. --> |
| <string name="config_systemVisualIntelligence" translatable="false"></string> |
| <!-- On-device package for providing companion device associations. --> |
| <string name="config_systemCompanionDeviceProvider" translatable="false"></string> |
| |
| <!-- Whether this device is supporting the software microphone toggle --> |
| <bool name="config_supportsMicToggle">false</bool> |
| <!-- Whether this device is supporting the camera toggle --> |
| <bool name="config_supportsCamToggle">false</bool> |
| <!-- Whether this device is supporting the hardware microphone toggle --> |
| <bool name="config_supportsHardwareMicToggle">false</bool> |
| <!-- Whether this device is supporting the hardware camera toggle --> |
| <bool name="config_supportsHardwareCamToggle">false</bool> |
| <!-- Whether a camera intent is launched when the lens cover is toggled --> |
| <bool name="config_launchCameraOnCameraLensCoverToggle">true</bool> |
| <!-- Whether changing sensor privacy SW setting requires device to be unlocked --> |
| <bool name="config_sensorPrivacyRequiresAuthentication">true</bool> |
| |
| <!-- List containing the allowed install sources for accessibility service. --> |
| <string-array name="config_accessibility_allowed_install_source" translatable="false"/> |
| |
| <!-- Default value for Settings.ASSIST_LONG_PRESS_HOME_ENABLED --> |
| <bool name="config_assistLongPressHomeEnabledDefault">true</bool> |
| <!-- Default value for Settings.ASSIST_TOUCH_GESTURE_ENABLED --> |
| <bool name="config_assistTouchGestureEnabledDefault">true</bool> |
| |
| <!-- The maximum byte size of the information contained in the bundle of |
| HotwordDetectedResult. --> |
| <integer translatable="false" name="config_hotwordDetectedResultMaxBundleSize">0</integer> |
| |
| <!-- The amount of dimming to apply to wallpapers with mid range luminance. 0 displays |
| the wallpaper at full brightness. 1 displays the wallpaper as fully black. --> |
| <item name="config_wallpaperDimAmount" format="float" type="dimen">0.05</item> |
| |
| <!-- The default number of times per second that the seconds hand on AnalogClock ticks. If set |
| to 0, the seconds hand will be disabled. --> |
| <integer name="config_defaultAnalogClockSecondsHandFps">1</integer> |
| |
| <!-- List of shared library packages that should be loaded by the classloader after the |
| code and resources provided by applications. This value will be set by the manufacturer --> |
| <string-array name="config_sharedLibrariesLoadedAfterApp" translatable="false"> |
| </string-array> |
| |
| <!-- the number of the max cached processes in the system. --> |
| <integer name="config_customizedMaxCachedProcesses">32</integer> |
| |
| <!-- Whether this device should support taking app snapshots on closure --> |
| <bool name="config_disableTaskSnapshots">false</bool> |
| |
| <!-- The display cutout configs for secondary built-in display. --> |
| <string name="config_secondaryBuiltInDisplayCutout" translatable="false"></string> |
| <string name="config_secondaryBuiltInDisplayCutoutRectApproximation" translatable="false"> |
| @string/config_secondaryBuiltInDisplayCutout |
| </string> |
| <bool name="config_fillSecondaryBuiltInDisplayCutout">false</bool> |
| <bool name="config_maskSecondaryBuiltInDisplayCutout">false</bool> |
| |
| <!-- An array contains unique ids of all built-in displays and the unique id of a display can be |
| obtained from {@link Display#getUniqueId}. This array should be set for multi-display |
| devices if there are different display related configs(e.g. display cutout, rounded corner) |
| between each built-in display. |
| It is used as an index for multi-display related configs: |
| First look up the index of the unique id of the given built-in display unique id in this |
| array and use this index to get the info in corresponding config arrays such as: |
| - config_displayCutoutPathArray |
| - config_displayCutoutApproximationRectArray |
| - config_fillBuiltInDisplayCutoutArray |
| - config_maskBuiltInDisplayCutoutArray |
| - config_waterfallCutoutArray |
| - config_roundedCornerRadiusArray |
| - config_roundedCornerTopRadiusArray |
| - config_roundedCornerBottomRadiusArray |
| - config_builtInDisplayIsRoundArray (config in SystemUI resource) |
| - config_roundedCornerMultipleRadiusArray (config in SystemUI resource) |
| - config_roundedCornerDrawableArray (config in SystemUI resource) |
| - config_roundedCornerTopDrawableArray (config in SystemUI resource) |
| - config_roundedCornerBottomDrawableArray (config in SystemUI resource) |
| |
| Leave this array empty for single display device and the system will load the default main |
| built-in related configs. |
| --> |
| <string-array name="config_displayUniqueIdArray" translatable="false"> |
| <!-- Example: |
| <item>"local:1234567891"</item> // main built-in display |
| <item>"local:1234567892"</item> // secondary built-in display |
| --> |
| </string-array> |
| |
| <!-- The display cutout path config for each display in a multi-display device. --> |
| <string-array name="config_displayCutoutPathArray" translatable="false"> |
| <item>@string/config_mainBuiltInDisplayCutout</item> |
| <item>@string/config_secondaryBuiltInDisplayCutout</item> |
| </string-array> |
| |
| <!-- The display cutout approximation rect config for each display in a multi-display device. |
| --> |
| <string-array name="config_displayCutoutApproximationRectArray" translatable="false"> |
| <item>@string/config_mainBuiltInDisplayCutoutRectApproximation</item> |
| <item>@string/config_secondaryBuiltInDisplayCutoutRectApproximation</item> |
| </string-array> |
| |
| <!-- The maskBuiltInDisplayCutout config for each display in a multi-display device. --> |
| <array name="config_maskBuiltInDisplayCutoutArray" translatable="false"> |
| <item>@bool/config_maskMainBuiltInDisplayCutout</item> |
| <item>@bool/config_maskSecondaryBuiltInDisplayCutout</item> |
| </array> |
| |
| <!-- The fillBuiltInDisplayCutout config for each display in a multi-display device. --> |
| <array name="config_fillBuiltInDisplayCutoutArray" translatable="false"> |
| <item>@bool/config_fillMainBuiltInDisplayCutout</item> |
| <item>@bool/config_fillSecondaryBuiltInDisplayCutout</item> |
| </array> |
| |
| <array name="config_mainBuiltInDisplayWaterfallCutout" translatable="false"> |
| <item>@dimen/waterfall_display_left_edge_size</item> |
| <item>@dimen/waterfall_display_top_edge_size</item> |
| <item>@dimen/waterfall_display_right_edge_size</item> |
| <item>@dimen/waterfall_display_bottom_edge_size</item> |
| </array> |
| |
| <array name="config_secondaryBuiltInDisplayWaterfallCutout" translatable="false"> |
| <item>@dimen/secondary_waterfall_display_left_edge_size</item> |
| <item>@dimen/secondary_waterfall_display_top_edge_size</item> |
| <item>@dimen/secondary_waterfall_display_right_edge_size</item> |
| <item>@dimen/secondary_waterfall_display_bottom_edge_size</item> |
| </array> |
| |
| <!-- The waterfall cutout config for each display in a multi-display device. --> |
| <array name="config_waterfallCutoutArray" translatable="false"> |
| <item>@array/config_mainBuiltInDisplayWaterfallCutout</item> |
| <item>@array/config_secondaryBuiltInDisplayWaterfallCutout</item> |
| </array> |
| |
| <!-- The component name of the activity for the companion-device-manager notification access |
| confirmation. --> |
| <string name="config_notificationAccessConfirmationActivity" translatable="false"> |
| com.android.settings/com.android.settings.notification.NotificationAccessConfirmationActivity |
| </string> |
| |
| <!-- Whether the airplane mode should be reset when device boots in non-safemode after exiting |
| from safemode. |
| This flag should be enabled only when the product does not have any UI to toggle airplane |
| mode like automotive devices.--> |
| <bool name="config_autoResetAirplaneMode">false</bool> |
| |
| <!-- Wear OS: the name of the package containing the device's sysui. --> |
| <string name="config_wearSysUiPackage" translatable="false"/> |
| |
| <!-- Wear OS: the name of the main activity of the device's sysui. --> |
| <string name="config_wearSysUiMainActivity" translatable="false"/> |
| |
| <bool name="config_secondaryBuiltInDisplayIsRound">@bool/config_windowIsRound</bool> |
| |
| <!-- The display round config for each display in a multi-display device. --> |
| <array name="config_builtInDisplayIsRoundArray" translatable="false"> |
| <item>@bool/config_mainBuiltInDisplayIsRound</item> |
| <item>@bool/config_secondaryBuiltInDisplayIsRound</item> |
| </array> |
| |
| <!-- The rounded corner radius for each display in a multi-display device. --> |
| <array name="config_roundedCornerRadiusArray" translatable="false"> |
| <item>@dimen/rounded_corner_radius</item> |
| <item>@dimen/secondary_rounded_corner_radius</item> |
| </array> |
| |
| <!-- The top rounded corner radius for each display in a multi-display device. --> |
| <array name="config_roundedCornerTopRadiusArray" translatable="false"> |
| <item>@dimen/rounded_corner_radius_top</item> |
| <item>@dimen/secondary_rounded_corner_radius_top</item> |
| </array> |
| |
| <!-- The bottom rounded corner radius for each display in a multi-display device. --> |
| <array name="config_roundedCornerBottomRadiusArray" translatable="false"> |
| <item>@dimen/rounded_corner_radius_bottom</item> |
| <item>@dimen/secondary_rounded_corner_radius_bottom</item> |
| </array> |
| |
| <!-- The rounded corner radius adjustment for each display in a multi-display device. --> |
| <array name="config_roundedCornerRadiusAdjustmentArray" translatable="false"> |
| <item>@dimen/rounded_corner_radius_adjustment</item> |
| <item>@dimen/secondary_rounded_corner_radius_adjustment</item> |
| </array> |
| |
| <!-- The rounded corner radius top adjustment for each display in a multi-display device. --> |
| <array name="config_roundedCornerTopRadiusAdjustmentArray" translatable="false"> |
| <item>@dimen/rounded_corner_radius_top_adjustment</item> |
| <item>@dimen/secondary_rounded_corner_radius_top_adjustment</item> |
| </array> |
| |
| <!-- The rounded corner radius bottom adjustment for each display in a multi-display device. --> |
| <array name="config_roundedCornerBottomRadiusAdjustmentArray" translatable="false"> |
| <item>@dimen/rounded_corner_radius_bottom_adjustment</item> |
| <item>@dimen/secondary_rounded_corner_radius_bottom_adjustment</item> |
| </array> |
| |
| <!-- Shape of the work badge icon for viewport size 24. --> |
| <string name="config_work_badge_path_24" translatable="false"> |
| M20,6h-4L16,4c0,-1.11 -0.89,-2 -2,-2h-4c-1.11,0 -2,0.89 -2,2v2L4,6c-1.11,0 -1.99,0.89 -1.99,2L2,19c0,1.11 0.89,2 2,2h16c1.11,0 2,-0.89 2,-2L22,8c0,-1.11 -0.89,-2 -2,-2zM14,6h-4L10,4h4v2z |
| </string> |
| |
| <!-- GNSS configurations to override carrier config. Empty by default--> |
| <string-array name="config_gnssParameters" translatable="false"> |
| <!-- Add configurations here, example: --> |
| <!-- <item>SUPL_HOST=supl.google.com</item> --> |
| </string-array> |
| |
| <integer name="config_chooser_max_targets_per_row">4</integer> |
| |
| <!-- Package that provides the supervised user creation flow. This package must include an |
| activity with an intent filter for {@link UserManager.ACTION_CREATE_SUPERVISED_USER}. |
| When this resource is defined, an extra button in user settings screen will be shown |
| with a title defined in @*android:string/supervised_user_creation_label |
| and an icon defined in @*android:drawable/ic_add_supervised_user. |
| That button will fire an intent targeted for this package with the mentioned action. |
| When this resource is empty, that button will not be shown. --> |
| <string name="config_supervisedUserCreationPackage" translatable="false"></string> |
| |
| <!-- Determines whether SafetyCenter feature is enabled. --> |
| <bool name="config_enableSafetyCenter">true</bool> |
| |
| <!-- Flag indicating if help links for Settings app should be enabled. --> |
| <bool name="config_settingsHelpLinksEnabled">false</bool> |
| |
| <!-- Whether or not to enable the lock screen entry point for the QR code scanner. --> |
| <bool name="config_enableQrCodeScannerOnLockScreen">false</bool> |
| |
| <!-- Default component for QR code scanner --> |
| <string name="config_defaultQrCodeComponent"></string> |
| |
| <!-- Whether Low Power Standby is supported and can be enabled. --> |
| <bool name="config_lowPowerStandbySupported">false</bool> |
| |
| <!-- If supported, whether Low Power Standby is enabled by default. --> |
| <bool name="config_lowPowerStandbyEnabledByDefault">false</bool> |
| |
| <!-- The amount of time after becoming non-interactive (in ms) after which |
| Low Power Standby can activate. --> |
| <integer name="config_lowPowerStandbyNonInteractiveTimeout">5000</integer> |
| |
| |
| <!-- Mapping to select an Intent.EXTRA_DOCK_STATE value from extcon state |
| key-value pairs. Each entry is evaluated in order and is of the form: |
| "[EXTRA_DOCK_STATE value],key1=value1,key2=value2[,...]" |
| An entry with no key-value pairs is valid and can be used as a wildcard. |
| --> |
| <string-array name="config_dockExtconStateMapping"> |
| </string-array> |
| |
| <!-- Whether or not the monitoring on the apps' background battery drain is enabled --> |
| <bool name="config_bg_current_drain_monitor_enabled">true</bool> |
| |
| <!-- The threshold of the background current drain (in percentage) to the restricted |
| standby bucket. |
| --> |
| <array name="config_bg_current_drain_threshold_to_restricted_bucket"> |
| <item>2.0</item> <!-- regular device --> |
| <item>4.0</item> <!-- low ram device --> |
| </array> |
| |
| <!-- The threshold of the background current drain (in percentage) to the background |
| restricted level. |
| --> |
| <array name="config_bg_current_drain_threshold_to_bg_restricted"> |
| <item>4.0</item> <!-- regular device --> |
| <item>8.0</item> <!-- low ram device --> |
| </array> |
| |
| <!-- The background current drain monitoring window size. --> |
| <integer name="config_bg_current_drain_window">86400</integer> |
| |
| <!-- The types of battery drain we're checking on each app; if the sum of the battery drain |
| exceeds the threshold, it'll be moved to restricted standby bucket. The value must be |
| one of or combination of the definitions in AppBatteryPolicy. |
| --> |
| <integer name="config_bg_current_drain_types_to_restricted_bucket">20</integer> |
| |
| <!-- The types of battery drain we're checking on each app; if the sum of the battery drain |
| exceeds the threshold, it'll be moved to background restricted level. The value must be |
| one of or combination of the definitions in AppBatteryPolicy. |
| --> |
| <integer name="config_bg_current_drain_types_to_bg_restricted">28</integer> |
| |
| <!-- The power usage components we're monitoring. Must one of the definition in BatteryConsumer. |
| --> |
| <integer name="config_bg_current_drain_power_components">-1</integer> |
| |
| <!-- Whether or not enable the different threshold based on the durations of |
| certain event type. |
| --> |
| <bool name="config_bg_current_drain_event_duration_based_threshold_enabled">false</bool> |
| |
| <!-- The threshold of the background current drain (in percentage) to the restricted |
| standby bucket for legitimate case with higher background current drain. |
| --> |
| <array name="config_bg_current_drain_high_threshold_to_restricted_bucket"> |
| <item>30.0</item> <!-- regular device --> |
| <item>60.0</item> <!-- low ram device --> |
| </array> |
| |
| <!-- The threshold of the background current drain (in percentage) to the background |
| restricted level for legitimate case with higher background current drain. |
| --> |
| <array name="config_bg_current_drain_high_threshold_to_bg_restricted"> |
| <item>20.0</item> <!-- regular device --> |
| <item>40.0</item> <!-- low ram device --> |
| </array> |
| |
| <!-- The threshold of minimal time of hosting a foreground service with type "mediaPlayback" |
| or a media session, over the given window, so it'd subject towards the higher background |
| current drain threshold. |
| --> |
| <integer name="config_bg_current_drain_media_playback_min_duration">1800</integer> |
| |
| <!-- The threshold of minimal time of hosting a foreground service with type "location" |
| over the given window, so it'd subject towards the higher background |
| current drain threshold. |
| --> |
| <integer name="config_bg_current_drain_location_min_duration">1800</integer> |
| |
| <!-- The behavior for an app with a FGS and its notification is still showing, when the system |
| detects it's abusive and should be put into bg restricted level. True - we'll |
| show the prompt to user, False - we'll not show it. |
| --> |
| <bool name="config_bg_prompt_fgs_with_noti_to_bg_restricted">false</bool> |
| |
| <!-- The behavior when the system detects it's abusive, should the system prompt the user |
| to put it into the bg restricted level. |
| True - we'll show the prompt to user, False - we'll not show it. |
| --> |
| <bool name="config_bg_prompt_abusive_apps_to_bg_restricted">false</bool> |
| |
| <!-- The types of state where we'll exempt its battery usage during that state. |
| The state here must be one or a combination of STATE_TYPE_* in BaseAppStateTracker. |
| --> |
| <integer name="config_bg_current_drain_exempted_types">25</integer> |
| |
| <!-- The behavior when an app has the permission ACCESS_BACKGROUND_LOCATION granted, |
| whether or not the system will use a higher threshold towards its background battery usage |
| because of it. |
| --> |
| <bool name="config_bg_current_drain_high_threshold_by_bg_location">false</bool> |
| |
| <!-- Start safety protection resources to be overlaid --> |
| |
| <!-- Safety protection icon to be overlaid --> |
| <item name="ic_safety_protection" type="drawable">@null</item> |
| |
| <!-- Display text for safety protection to be overlaid. This is translatable --> |
| <string name="safety_protection_display_text"></string> |
| |
| <!-- End safety protection resources to be overlaid --> |
| |
| <!-- List of the labels of requestable device state config values --> |
| <string-array name="config_deviceStatesAvailableForAppRequests"/> |
| |
| <!-- Interval in milliseconds to average light sensor values for camera light brightness --> |
| <integer name="config_cameraPrivacyLightAlsAveragingIntervalMillis">3000</integer> |
| <!-- Light sensor's lux value to use as the threshold between using day or night brightness --> |
| <integer name="config_cameraPrivacyLightAlsNightThreshold">4</integer> |
| |
| <!-- List of system components which are allowed to receive ServiceState entries in an |
| un-sanitized form, even if the location toggle is off. This is intended ONLY for system |
| components, such as the telephony stack, which require access to the full ServiceState for |
| tasks such as network registration. --> |
| <string-array name="config_serviceStateLocationAllowedPackages"> |
| <item>"com.android.phone"</item> |
| </string-array> |
| </resources> |