| //===-- RegisterPressure.h - Dynamic Register Pressure -*- C++ -*-------===// |
| // |
| // The LLVM Compiler Infrastructure |
| // |
| // This file is distributed under the University of Illinois Open Source |
| // License. See LICENSE.TXT for details. |
| // |
| //===----------------------------------------------------------------------===// |
| // |
| // This file defines the RegisterPressure class which can be used to track |
| // MachineInstr level register pressure. |
| // |
| //===----------------------------------------------------------------------===// |
| |
| #ifndef LLVM_CODEGEN_REGISTERPRESSURE_H |
| #define LLVM_CODEGEN_REGISTERPRESSURE_H |
| |
| #include "llvm/ADT/SparseSet.h" |
| #include "llvm/CodeGen/SlotIndexes.h" |
| #include "llvm/Target/TargetRegisterInfo.h" |
| |
| namespace llvm { |
| |
| class LiveIntervals; |
| class LiveRange; |
| class RegisterClassInfo; |
| class MachineInstr; |
| |
| /// Base class for register pressure results. |
| struct RegisterPressure { |
| /// Map of max reg pressure indexed by pressure set ID, not class ID. |
| std::vector<unsigned> MaxSetPressure; |
| |
| /// List of live in virtual registers or physical register units. |
| SmallVector<unsigned,8> LiveInRegs; |
| SmallVector<unsigned,8> LiveOutRegs; |
| |
| /// Increase register pressure for each pressure set impacted by this register |
| /// class. Normally called by RegPressureTracker, but may be called manually |
| /// to account for live through (global liveness). |
| /// |
| /// \param Reg is either a virtual register number or register unit number. |
| void increase(unsigned Reg, const TargetRegisterInfo *TRI, |
| const MachineRegisterInfo *MRI); |
| |
| /// Decrease register pressure for each pressure set impacted by this register |
| /// class. This is only useful to account for spilling or rematerialization. |
| /// |
| /// \param Reg is either a virtual register number or register unit number. |
| void decrease(unsigned Reg, const TargetRegisterInfo *TRI, |
| const MachineRegisterInfo *MRI); |
| |
| void dump(const TargetRegisterInfo *TRI) const; |
| }; |
| |
| /// RegisterPressure computed within a region of instructions delimited by |
| /// TopIdx and BottomIdx. During pressure computation, the maximum pressure per |
| /// register pressure set is increased. Once pressure within a region is fully |
| /// computed, the live-in and live-out sets are recorded. |
| /// |
| /// This is preferable to RegionPressure when LiveIntervals are available, |
| /// because delimiting regions by SlotIndex is more robust and convenient than |
| /// holding block iterators. The block contents can change without invalidating |
| /// the pressure result. |
| struct IntervalPressure : RegisterPressure { |
| /// Record the boundary of the region being tracked. |
| SlotIndex TopIdx; |
| SlotIndex BottomIdx; |
| |
| void reset(); |
| |
| void openTop(SlotIndex NextTop); |
| |
| void openBottom(SlotIndex PrevBottom); |
| }; |
| |
| /// RegisterPressure computed within a region of instructions delimited by |
| /// TopPos and BottomPos. This is a less precise version of IntervalPressure for |
| /// use when LiveIntervals are unavailable. |
| struct RegionPressure : RegisterPressure { |
| /// Record the boundary of the region being tracked. |
| MachineBasicBlock::const_iterator TopPos; |
| MachineBasicBlock::const_iterator BottomPos; |
| |
| void reset(); |
| |
| void openTop(MachineBasicBlock::const_iterator PrevTop); |
| |
| void openBottom(MachineBasicBlock::const_iterator PrevBottom); |
| }; |
| |
| /// Capture a change in pressure for a single pressure set. UnitInc may be |
| /// expressed in terms of upward or downward pressure depending on the client |
| /// and will be dynamically adjusted for current liveness. |
| /// |
| /// Pressure increments are tiny, typically 1-2 units, and this is only for |
| /// heuristics, so we don't check UnitInc overflow. Instead, we may have a |
| /// higher level assert that pressure is consistent within a region. We also |
| /// effectively ignore dead defs which don't affect heuristics much. |
| class PressureChange { |
| uint16_t PSetID; // ID+1. 0=Invalid. |
| int16_t UnitInc; |
| public: |
| PressureChange(): PSetID(0), UnitInc(0) {} |
| PressureChange(unsigned id): PSetID(id+1), UnitInc(0) { |
| assert(id < UINT16_MAX && "PSetID overflow."); |
| } |
| |
| bool isValid() const { return PSetID > 0; } |
| |
| unsigned getPSet() const { |
| assert(isValid() && "invalid PressureChange"); |
| return PSetID - 1; |
| } |
| // If PSetID is invalid, return UINT16_MAX to give it lowest priority. |
| unsigned getPSetOrMax() const { return (PSetID - 1) & UINT16_MAX; } |
| |
| int getUnitInc() const { return UnitInc; } |
| |
| void setUnitInc(int Inc) { UnitInc = Inc; } |
| |
| bool operator==(const PressureChange &RHS) const { |
| return PSetID == RHS.PSetID && UnitInc == RHS.UnitInc; |
| } |
| }; |
| |
| template <> struct isPodLike<PressureChange> { |
| static const bool value = true; |
| }; |
| |
| /// List of PressureChanges in order of increasing, unique PSetID. |
| /// |
| /// Use a small fixed number, because we can fit more PressureChanges in an |
| /// empty SmallVector than ever need to be tracked per register class. If more |
| /// PSets are affected, then we only track the most constrained. |
| class PressureDiff { |
| // The initial design was for MaxPSets=4, but that requires PSet partitions, |
| // which are not yet implemented. (PSet partitions are equivalent PSets given |
| // the register classes actually in use within the scheduling region.) |
| enum { MaxPSets = 16 }; |
| |
| PressureChange PressureChanges[MaxPSets]; |
| public: |
| typedef PressureChange* iterator; |
| typedef const PressureChange* const_iterator; |
| iterator begin() { return &PressureChanges[0]; } |
| iterator end() { return &PressureChanges[MaxPSets]; } |
| const_iterator begin() const { return &PressureChanges[0]; } |
| const_iterator end() const { return &PressureChanges[MaxPSets]; } |
| |
| void addPressureChange(unsigned RegUnit, bool IsDec, |
| const MachineRegisterInfo *MRI); |
| }; |
| |
| /// Array of PressureDiffs. |
| class PressureDiffs { |
| PressureDiff *PDiffArray; |
| unsigned Size; |
| unsigned Max; |
| public: |
| PressureDiffs(): PDiffArray(nullptr), Size(0), Max(0) {} |
| ~PressureDiffs() { free(PDiffArray); } |
| |
| void clear() { Size = 0; } |
| |
| void init(unsigned N); |
| |
| PressureDiff &operator[](unsigned Idx) { |
| assert(Idx < Size && "PressureDiff index out of bounds"); |
| return PDiffArray[Idx]; |
| } |
| const PressureDiff &operator[](unsigned Idx) const { |
| return const_cast<PressureDiffs*>(this)->operator[](Idx); |
| } |
| }; |
| |
| /// Store the effects of a change in pressure on things that MI scheduler cares |
| /// about. |
| /// |
| /// Excess records the value of the largest difference in register units beyond |
| /// the target's pressure limits across the affected pressure sets, where |
| /// largest is defined as the absolute value of the difference. Negative |
| /// ExcessUnits indicates a reduction in pressure that had already exceeded the |
| /// target's limits. |
| /// |
| /// CriticalMax records the largest increase in the tracker's max pressure that |
| /// exceeds the critical limit for some pressure set determined by the client. |
| /// |
| /// CurrentMax records the largest increase in the tracker's max pressure that |
| /// exceeds the current limit for some pressure set determined by the client. |
| struct RegPressureDelta { |
| PressureChange Excess; |
| PressureChange CriticalMax; |
| PressureChange CurrentMax; |
| |
| RegPressureDelta() {} |
| |
| bool operator==(const RegPressureDelta &RHS) const { |
| return Excess == RHS.Excess && CriticalMax == RHS.CriticalMax |
| && CurrentMax == RHS.CurrentMax; |
| } |
| bool operator!=(const RegPressureDelta &RHS) const { |
| return !operator==(RHS); |
| } |
| }; |
| |
| /// \brief A set of live virtual registers and physical register units. |
| /// |
| /// Virtual and physical register numbers require separate sparse sets, but most |
| /// of the RegisterPressureTracker handles them uniformly. |
| struct LiveRegSet { |
| SparseSet<unsigned> PhysRegs; |
| SparseSet<unsigned, VirtReg2IndexFunctor> VirtRegs; |
| |
| bool contains(unsigned Reg) const { |
| if (TargetRegisterInfo::isVirtualRegister(Reg)) |
| return VirtRegs.count(Reg); |
| return PhysRegs.count(Reg); |
| } |
| |
| bool insert(unsigned Reg) { |
| if (TargetRegisterInfo::isVirtualRegister(Reg)) |
| return VirtRegs.insert(Reg).second; |
| return PhysRegs.insert(Reg).second; |
| } |
| |
| bool erase(unsigned Reg) { |
| if (TargetRegisterInfo::isVirtualRegister(Reg)) |
| return VirtRegs.erase(Reg); |
| return PhysRegs.erase(Reg); |
| } |
| }; |
| |
| /// Track the current register pressure at some position in the instruction |
| /// stream, and remember the high water mark within the region traversed. This |
| /// does not automatically consider live-through ranges. The client may |
| /// independently adjust for global liveness. |
| /// |
| /// Each RegPressureTracker only works within a MachineBasicBlock. Pressure can |
| /// be tracked across a larger region by storing a RegisterPressure result at |
| /// each block boundary and explicitly adjusting pressure to account for block |
| /// live-in and live-out register sets. |
| /// |
| /// RegPressureTracker holds a reference to a RegisterPressure result that it |
| /// computes incrementally. During downward tracking, P.BottomIdx or P.BottomPos |
| /// is invalid until it reaches the end of the block or closeRegion() is |
| /// explicitly called. Similarly, P.TopIdx is invalid during upward |
| /// tracking. Changing direction has the side effect of closing region, and |
| /// traversing past TopIdx or BottomIdx reopens it. |
| class RegPressureTracker { |
| const MachineFunction *MF; |
| const TargetRegisterInfo *TRI; |
| const RegisterClassInfo *RCI; |
| const MachineRegisterInfo *MRI; |
| const LiveIntervals *LIS; |
| |
| /// We currently only allow pressure tracking within a block. |
| const MachineBasicBlock *MBB; |
| |
| /// Track the max pressure within the region traversed so far. |
| RegisterPressure &P; |
| |
| /// Run in two modes dependending on whether constructed with IntervalPressure |
| /// or RegisterPressure. If requireIntervals is false, LIS are ignored. |
| bool RequireIntervals; |
| |
| /// True if UntiedDefs will be populated. |
| bool TrackUntiedDefs; |
| |
| /// Register pressure corresponds to liveness before this instruction |
| /// iterator. It may point to the end of the block or a DebugValue rather than |
| /// an instruction. |
| MachineBasicBlock::const_iterator CurrPos; |
| |
| /// Pressure map indexed by pressure set ID, not class ID. |
| std::vector<unsigned> CurrSetPressure; |
| |
| /// Set of live registers. |
| LiveRegSet LiveRegs; |
| |
| /// Set of vreg defs that start a live range. |
| SparseSet<unsigned, VirtReg2IndexFunctor> UntiedDefs; |
| /// Live-through pressure. |
| std::vector<unsigned> LiveThruPressure; |
| |
| public: |
| RegPressureTracker(IntervalPressure &rp) : |
| MF(nullptr), TRI(nullptr), RCI(nullptr), LIS(nullptr), MBB(nullptr), P(rp), |
| RequireIntervals(true), TrackUntiedDefs(false) {} |
| |
| RegPressureTracker(RegionPressure &rp) : |
| MF(nullptr), TRI(nullptr), RCI(nullptr), LIS(nullptr), MBB(nullptr), P(rp), |
| RequireIntervals(false), TrackUntiedDefs(false) {} |
| |
| void reset(); |
| |
| void init(const MachineFunction *mf, const RegisterClassInfo *rci, |
| const LiveIntervals *lis, const MachineBasicBlock *mbb, |
| MachineBasicBlock::const_iterator pos, |
| bool ShouldTrackUntiedDefs = false); |
| |
| /// Force liveness of virtual registers or physical register |
| /// units. Particularly useful to initialize the livein/out state of the |
| /// tracker before the first call to advance/recede. |
| void addLiveRegs(ArrayRef<unsigned> Regs); |
| |
| /// Get the MI position corresponding to this register pressure. |
| MachineBasicBlock::const_iterator getPos() const { return CurrPos; } |
| |
| // Reset the MI position corresponding to the register pressure. This allows |
| // schedulers to move instructions above the RegPressureTracker's |
| // CurrPos. Since the pressure is computed before CurrPos, the iterator |
| // position changes while pressure does not. |
| void setPos(MachineBasicBlock::const_iterator Pos) { CurrPos = Pos; } |
| |
| /// \brief Get the SlotIndex for the first nondebug instruction including or |
| /// after the current position. |
| SlotIndex getCurrSlot() const; |
| |
| /// Recede across the previous instruction. |
| bool recede(SmallVectorImpl<unsigned> *LiveUses = nullptr, |
| PressureDiff *PDiff = nullptr); |
| |
| /// Advance across the current instruction. |
| bool advance(); |
| |
| /// Finalize the region boundaries and recored live ins and live outs. |
| void closeRegion(); |
| |
| /// Initialize the LiveThru pressure set based on the untied defs found in |
| /// RPTracker. |
| void initLiveThru(const RegPressureTracker &RPTracker); |
| |
| /// Copy an existing live thru pressure result. |
| void initLiveThru(ArrayRef<unsigned> PressureSet) { |
| LiveThruPressure.assign(PressureSet.begin(), PressureSet.end()); |
| } |
| |
| ArrayRef<unsigned> getLiveThru() const { return LiveThruPressure; } |
| |
| /// Get the resulting register pressure over the traversed region. |
| /// This result is complete if either advance() or recede() has returned true, |
| /// or if closeRegion() was explicitly invoked. |
| RegisterPressure &getPressure() { return P; } |
| const RegisterPressure &getPressure() const { return P; } |
| |
| /// Get the register set pressure at the current position, which may be less |
| /// than the pressure across the traversed region. |
| std::vector<unsigned> &getRegSetPressureAtPos() { return CurrSetPressure; } |
| |
| void discoverLiveOut(unsigned Reg); |
| void discoverLiveIn(unsigned Reg); |
| |
| bool isTopClosed() const; |
| bool isBottomClosed() const; |
| |
| void closeTop(); |
| void closeBottom(); |
| |
| /// Consider the pressure increase caused by traversing this instruction |
| /// bottom-up. Find the pressure set with the most change beyond its pressure |
| /// limit based on the tracker's current pressure, and record the number of |
| /// excess register units of that pressure set introduced by this instruction. |
| void getMaxUpwardPressureDelta(const MachineInstr *MI, |
| PressureDiff *PDiff, |
| RegPressureDelta &Delta, |
| ArrayRef<PressureChange> CriticalPSets, |
| ArrayRef<unsigned> MaxPressureLimit); |
| |
| void getUpwardPressureDelta(const MachineInstr *MI, |
| /*const*/ PressureDiff &PDiff, |
| RegPressureDelta &Delta, |
| ArrayRef<PressureChange> CriticalPSets, |
| ArrayRef<unsigned> MaxPressureLimit) const; |
| |
| /// Consider the pressure increase caused by traversing this instruction |
| /// top-down. Find the pressure set with the most change beyond its pressure |
| /// limit based on the tracker's current pressure, and record the number of |
| /// excess register units of that pressure set introduced by this instruction. |
| void getMaxDownwardPressureDelta(const MachineInstr *MI, |
| RegPressureDelta &Delta, |
| ArrayRef<PressureChange> CriticalPSets, |
| ArrayRef<unsigned> MaxPressureLimit); |
| |
| /// Find the pressure set with the most change beyond its pressure limit after |
| /// traversing this instruction either upward or downward depending on the |
| /// closed end of the current region. |
| void getMaxPressureDelta(const MachineInstr *MI, |
| RegPressureDelta &Delta, |
| ArrayRef<PressureChange> CriticalPSets, |
| ArrayRef<unsigned> MaxPressureLimit) { |
| if (isTopClosed()) |
| return getMaxDownwardPressureDelta(MI, Delta, CriticalPSets, |
| MaxPressureLimit); |
| |
| assert(isBottomClosed() && "Uninitialized pressure tracker"); |
| return getMaxUpwardPressureDelta(MI, nullptr, Delta, CriticalPSets, |
| MaxPressureLimit); |
| } |
| |
| /// Get the pressure of each PSet after traversing this instruction bottom-up. |
| void getUpwardPressure(const MachineInstr *MI, |
| std::vector<unsigned> &PressureResult, |
| std::vector<unsigned> &MaxPressureResult); |
| |
| /// Get the pressure of each PSet after traversing this instruction top-down. |
| void getDownwardPressure(const MachineInstr *MI, |
| std::vector<unsigned> &PressureResult, |
| std::vector<unsigned> &MaxPressureResult); |
| |
| void getPressureAfterInst(const MachineInstr *MI, |
| std::vector<unsigned> &PressureResult, |
| std::vector<unsigned> &MaxPressureResult) { |
| if (isTopClosed()) |
| return getUpwardPressure(MI, PressureResult, MaxPressureResult); |
| |
| assert(isBottomClosed() && "Uninitialized pressure tracker"); |
| return getDownwardPressure(MI, PressureResult, MaxPressureResult); |
| } |
| |
| bool hasUntiedDef(unsigned VirtReg) const { |
| return UntiedDefs.count(VirtReg); |
| } |
| |
| void dump() const; |
| |
| protected: |
| const LiveRange *getLiveRange(unsigned Reg) const; |
| |
| void increaseRegPressure(ArrayRef<unsigned> Regs); |
| void decreaseRegPressure(ArrayRef<unsigned> Regs); |
| |
| void bumpUpwardPressure(const MachineInstr *MI); |
| void bumpDownwardPressure(const MachineInstr *MI); |
| }; |
| |
| void dumpRegSetPressure(ArrayRef<unsigned> SetPressure, |
| const TargetRegisterInfo *TRI); |
| } // end namespace llvm |
| |
| #endif |