| #!/system/bin/sh | |
| # | |
| # Copyright (C) 2018 The Android Open Source Project | |
| # | |
| # Licensed under the Apache License, Version 2.0 (the "License"); | |
| # you may not use this file except in compliance with the License. | |
| # You may obtain a copy of the License at | |
| # | |
| # http://www.apache.org/licenses/LICENSE-2.0 | |
| # | |
| # Unless required by applicable law or agreed to in writing, software | |
| # distributed under the License is distributed on an "AS IS" BASIS, | |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| # See the License for the specific language governing permissions and | |
| # limitations under the License. | |
| # performance test setup for 2018 devices | |
| stop vendor.thermal-engine | |
| setprop vendor.powerhal.init 0 | |
| setprop ctl.restart vendor.power-hal-aidl | |
| setprop ctl.interface_restart android.hardware.power@1.0::IPower/default | |
| cpubase=/sys/devices/system/cpu | |
| gov=cpufreq/scaling_governor | |
| cpu=4 | |
| top=7 | |
| cpufreq=2016000 | |
| # Set the bigcores at 2016000. | |
| while [ $((cpu < $top)) -eq 1 ]; do | |
| echo 1 > $cpubase/cpu${cpu}/online | |
| echo performance > $cpubase/cpu${cpu}/$gov | |
| echo $cpufreq > /sys/devices/system/cpu/cpu$cpu/cpufreq/scaling_max_freq | |
| S=`cat $cpubase/cpu${cpu}/cpufreq/scaling_cur_freq` | |
| echo "set cpu $cpu to $S kHz" | |
| cpu=$(($cpu + 1)) | |
| done | |
| cpu=0 | |
| top=4 | |
| # Disable the silver cores. | |
| while [ $((cpu < $top)) -eq 1 ]; do | |
| echo "disable cpu $cpu" | |
| echo 0 > $cpubase/cpu${cpu}/online | |
| cpu=$(($cpu + 1)) | |
| done | |
| cpu=7 | |
| top=8 | |
| # Disable the big+ core. | |
| while [ $((cpu < $top)) -eq 1 ]; do | |
| echo "disable cpu $cpu" | |
| echo 0 > $cpubase/cpu${cpu}/online | |
| cpu=$(($cpu + 1)) | |
| done | |
| echo "disable GPU bus split" | |
| echo 0 > /sys/class/kgsl/kgsl-3d0/bus_split | |
| echo "enable GPU force clock on" | |
| echo 1 > /sys/class/kgsl/kgsl-3d0/force_clk_on | |
| echo "set GPU idle timer to 10000" | |
| echo 10000 > /sys/class/kgsl/kgsl-3d0/idle_timer | |
| # 0 381 572 762 1144 1571 2086 2597 2929 3879 4943 5931 6881 | |
| echo performance > /sys/class/devfreq/soc:qcom,gpubw/governor | |
| echo -n "set GPU bus frequency to max at " | |
| cat /sys/class/devfreq/soc:qcom,gpubw/cur_freq | |
| # 257000000 345000000 427000000 585000000 | |
| G=427000000 | |
| echo performance > /sys/class/kgsl/kgsl-3d0/devfreq/governor | |
| echo $G > /sys/class/kgsl/kgsl-3d0/devfreq/min_freq | |
| echo $G > /sys/class/kgsl/kgsl-3d0/devfreq/max_freq | |
| echo -n "set GPU frequency to " | |
| cat /sys/class/kgsl/kgsl-3d0/devfreq/cur_freq |