blob: 818d305a72f014b9a7772cf2e69d706a6f64eb08 [file] [log] [blame]
/*
* Copyright (C) 2015 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#define TRACE_TAG ADB
#include "sysdeps.h"
#include <signal.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <thread>
#include <android-base/errors.h>
#include <android-base/file.h>
#include <android-base/logging.h>
#include <android-base/stringprintf.h>
#include "adb.h"
#include "adb_auth.h"
#include "adb_client.h"
#include "adb_listeners.h"
#include "adb_mdns.h"
#include "adb_utils.h"
#include "adb_wifi.h"
#include "client/usb.h"
#include "commandline.h"
#include "sysdeps/chrono.h"
#include "transport.h"
const char** __adb_argv;
const char** __adb_envp;
static void setup_daemon_logging() {
const std::string log_file_path(GetLogFilePath());
int fd = unix_open(log_file_path, O_WRONLY | O_CREAT | O_APPEND, 0640);
if (fd == -1) {
PLOG(FATAL) << "cannot open " << log_file_path;
}
if (dup2(fd, STDOUT_FILENO) == -1) {
PLOG(FATAL) << "cannot redirect stdout";
}
if (dup2(fd, STDERR_FILENO) == -1) {
PLOG(FATAL) << "cannot redirect stderr";
}
unix_close(fd);
fprintf(stderr, "--- adb starting (pid %d) ---\n", getpid());
LOG(INFO) << adb_version();
}
void adb_server_cleanup() {
// Upon exit, we want to clean up in the following order:
// 1. close_smartsockets, so that we don't get any new clients
// 2. kick_all_transports, to avoid writing only part of a packet to a transport.
// 3. usb_cleanup, to tear down the USB stack.
// 4. mdns_cleanup, to tear down mdns stack.
close_smartsockets();
kick_all_transports();
usb_cleanup();
mdns_cleanup();
}
static void intentionally_leak() {
void* p = ::operator new(1);
// The analyzer is upset about this leaking. NOLINTNEXTLINE
LOG(INFO) << "leaking pointer " << p;
}
// one_device: if null, server owns all devices, else server owns only
// device where atransport::MatchesTarget(one_device) is true.
int adb_server_main(int is_daemon, const std::string& socket_spec, const char* one_device,
int ack_reply_fd) {
#if defined(_WIN32)
// adb start-server starts us up with stdout and stderr hooked up to
// anonymous pipes. When the C Runtime sees this, it makes stderr and
// stdout buffered, but to improve the chance that error output is seen,
// unbuffer stdout and stderr just like if we were run at the console.
// This also keeps stderr unbuffered when it is redirected to adb.log.
if (is_daemon) {
if (setvbuf(stdout, nullptr, _IONBF, 0) == -1) {
PLOG(FATAL) << "cannot make stdout unbuffered";
}
if (setvbuf(stderr, nullptr, _IONBF, 0) == -1) {
PLOG(FATAL) << "cannot make stderr unbuffered";
}
}
// TODO: On Ctrl-C, consider trying to kill a starting up adb server (if we're in
// launch_server) by calling GenerateConsoleCtrlEvent().
// On Windows, SIGBREAK is when Ctrl-Break is pressed or the console window is closed. It should
// act like Ctrl-C.
signal(SIGBREAK, [](int) { raise(SIGINT); });
#endif
signal(SIGINT, [](int) { fdevent_run_on_looper([]() { exit(0); }); });
if (one_device) {
transport_set_one_device(one_device);
}
const char* reject_kill_server = getenv("ADB_REJECT_KILL_SERVER");
if (reject_kill_server && strcmp(reject_kill_server, "1") == 0) {
adb_set_reject_kill_server(true);
}
const char* leak = getenv("ADB_LEAK");
if (leak && strcmp(leak, "1") == 0) {
intentionally_leak();
}
if (is_daemon) {
close_stdin();
setup_daemon_logging();
}
atexit(adb_server_cleanup);
init_reconnect_handler();
if (!getenv("ADB_MDNS") || strcmp(getenv("ADB_MDNS"), "0") != 0) {
init_mdns_transport_discovery();
}
if (!getenv("ADB_USB") || strcmp(getenv("ADB_USB"), "0") != 0) {
if (should_use_libusb()) {
libusb::usb_init();
} else {
usb_init();
}
} else {
adb_notify_device_scan_complete();
}
if (!getenv("ADB_EMU") || strcmp(getenv("ADB_EMU"), "0") != 0) {
local_init(android::base::StringPrintf("tcp:%d", DEFAULT_ADB_LOCAL_TRANSPORT_PORT));
}
std::string error;
auto start = std::chrono::steady_clock::now();
// If we told a previous adb server to quit because of version mismatch, we can get to this
// point before it's finished exiting. Retry for a while to give it some time. Don't actually
// accept any connections until adb_wait_for_device_initialization finishes below.
while (install_listener(socket_spec, kSmartSocketConnectTo, nullptr, INSTALL_LISTENER_DISABLED,
nullptr, &error) != INSTALL_STATUS_OK) {
if (std::chrono::steady_clock::now() - start > 0.5s) {
LOG(FATAL) << "could not install *smartsocket* listener: " << error;
}
std::this_thread::sleep_for(100ms);
}
adb_auth_init();
if (is_daemon) {
#if !defined(_WIN32)
// Start a new session for the daemon. Do this here instead of after the fork so
// that a ctrl-c between the "starting server" and "done starting server" messages
// gets a chance to terminate the server.
// setsid will fail with EPERM if it's already been a lead process of new session.
// Ignore such error.
if (setsid() == -1 && errno != EPERM) {
PLOG(FATAL) << "setsid() failed";
}
#endif
}
// Wait for the USB scan to complete before notifying the parent that we're up.
// We need to perform this in a thread, because we would otherwise block the event loop.
std::thread notify_thread([ack_reply_fd]() {
adb_wait_for_device_initialization();
if (ack_reply_fd >= 0) {
// Any error output written to stderr now goes to adb.log. We could
// keep around a copy of the stderr fd and use that to write any errors
// encountered by the following code, but that is probably overkill.
#if defined(_WIN32)
const HANDLE ack_reply_handle = cast_int_to_handle(ack_reply_fd);
const CHAR ack[] = "OK\n";
const DWORD bytes_to_write = arraysize(ack) - 1;
DWORD written = 0;
if (!WriteFile(ack_reply_handle, ack, bytes_to_write, &written, NULL)) {
LOG(FATAL) << "cannot write ACK to handle " << ack_reply_handle
<< android::base::SystemErrorCodeToString(GetLastError());
}
if (written != bytes_to_write) {
LOG(FATAL) << "cannot write " << bytes_to_write << " bytes of ACK: only wrote "
<< written << " bytes";
}
CloseHandle(ack_reply_handle);
#else
// TODO(danalbert): Can't use SendOkay because we're sending "OK\n", not
// "OKAY".
if (!android::base::WriteStringToFd("OK\n", ack_reply_fd)) {
PLOG(FATAL) << "error writing ACK to fd " << ack_reply_fd;
}
unix_close(ack_reply_fd);
#endif
}
// We don't accept() client connections until this point: this way, clients
// can't see wonky state early in startup even if they're connecting directly
// to the server instead of going through the adb program.
fdevent_run_on_looper([] { enable_server_sockets(); });
});
notify_thread.detach();
#if defined(__linux__)
// Write our location to .android/adb.$PORT, so that older clients can exec us.
std::string path;
if (!android::base::Readlink("/proc/self/exe", &path)) {
PLOG(ERROR) << "failed to readlink /proc/self/exe";
}
std::optional<std::string> server_executable_path = adb_get_server_executable_path();
if (server_executable_path) {
if (!android::base::WriteStringToFile(path, *server_executable_path)) {
PLOG(ERROR) << "failed to write server path to " << path;
}
}
#endif
D("Event loop starting");
fdevent_loop();
return 0;
}
int main(int argc, char* argv[], char* envp[]) {
__adb_argv = const_cast<const char**>(argv);
__adb_envp = const_cast<const char**>(envp);
adb_trace_init(argv);
return adb_commandline(argc - 1, const_cast<const char**>(argv + 1));
}