Move adb/fastboot bash completion into adb/fastboot.
Bug: http://b/74443706
Test: bash completion still works.
Change-Id: I9da3a0ae748a202407652f513c990e9d05f8b01a
diff --git a/adb.bash b/adb.bash
new file mode 100644
index 0000000..d36bec3
--- /dev/null
+++ b/adb.bash
@@ -0,0 +1,499 @@
+# /* vim: set ai ts=4 ft=sh: */
+#
+# Copyright 2011, The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+_adb() {
+ if ! type -t "$1" >/dev/null; then
+ return
+ fi
+
+ if type -t _init_completion >/dev/null; then
+ _init_completion || return
+ fi
+
+ local where i cur serial
+ COMPREPLY=()
+
+ serial="${ANDROID_SERIAL:-none}"
+ where=OPTIONS
+ for ((i=1; i <= COMP_CWORD; i++)); do
+ cur="${COMP_WORDS[i]}"
+ case "${cur}" in
+ -s)
+ where=OPT_SERIAL
+ ;;
+ -p)
+ where=OPT_PATH
+ ;;
+ -*)
+ where=OPTIONS
+ ;;
+ *)
+ if [[ $where == OPT_SERIAL ]]; then
+ where=OPT_SERIAL_ARG
+ serial=${cur}
+ else
+ where=COMMAND
+ break
+ fi
+ ;;
+ esac
+ done
+
+ if [[ $where == COMMAND && $i -ge $COMP_CWORD ]]; then
+ where=OPTIONS
+ fi
+
+ OPTIONS="-d -e -s -p"
+ COMMAND="devices connect disconnect push pull sync shell emu logcat lolcat forward jdwp install uninstall bugreport help version start-server kill-server get-state get-serialno status-window remount reboot reboot-bootloader root usb tcpip disable-verity"
+
+ case $where in
+ OPTIONS|OPT_SERIAL|OPT_PATH)
+ COMPREPLY=( $(compgen -W "$OPTIONS $COMMAND" -- "$cur") )
+ ;;
+ OPT_SERIAL_ARG)
+ local devices=$(command adb devices 2> /dev/null | grep -v "List of devices" | awk '{ print $1 }')
+ COMPREPLY=( $(compgen -W "${devices}" -- ${cur}) )
+ ;;
+ COMMAND)
+ if [[ $i -eq $COMP_CWORD ]]; then
+ COMPREPLY=( $(compgen -W "$COMMAND" -- "$cur") )
+ else
+ i=$((i+1))
+ case "${cur}" in
+ install)
+ _adb_cmd_install "$serial" $i
+ ;;
+ sideload)
+ _adb_cmd_sideload "$serial" $i
+ ;;
+ pull)
+ _adb_cmd_pull "$serial" $i
+ ;;
+ push)
+ _adb_cmd_push "$serial" $i
+ ;;
+ reboot)
+ if [[ $COMP_CWORD == $i ]]; then
+ args="bootloader recovery"
+ COMPREPLY=( $(compgen -W "${args}" -- "${COMP_WORDS[i]}") )
+ fi
+ ;;
+ shell)
+ _adb_cmd_shell "$serial" $i
+ ;;
+ uninstall)
+ _adb_cmd_uninstall "$serial" $i
+ ;;
+ esac
+ fi
+ ;;
+ esac
+
+ return 0
+}
+
+_adb_cmd_install() {
+ local serial i cur where
+
+ serial=$1
+ i=$2
+
+ where=OPTIONS
+ for ((; i <= COMP_CWORD; i++)); do
+ cur="${COMP_WORDS[i]}"
+ case "${cur}" in
+ -*)
+ where=OPTIONS
+ ;;
+ *)
+ where=FILE
+ break
+ ;;
+ esac
+ done
+
+ cur="${COMP_WORDS[COMP_CWORD]}"
+ if [[ $where == OPTIONS ]]; then
+ COMPREPLY=( $(compgen -W "-d -l -r -s" -- "${cur}") )
+ return
+ fi
+
+ _adb_util_complete_local_file "${cur}" '!*.apk'
+}
+
+_adb_cmd_sideload() {
+ local serial i cur
+
+ serial=$1
+ i=$2
+
+ cur="${COMP_WORDS[COMP_CWORD]}"
+
+ _adb_util_complete_local_file "${cur}" '!*.zip'
+}
+
+_adb_cmd_push() {
+ local serial IFS=$'\n' i cur
+
+ serial=$1
+ i=$2
+
+ cur="${COMP_WORDS[COMP_CWORD]}"
+
+ if [[ $COMP_CWORD == $i ]]; then
+ _adb_util_complete_local_file "${cur}"
+ elif [[ $COMP_CWORD == $(($i+1)) ]]; then
+ if [ "${cur}" == "" ]; then
+ cur="/"
+ fi
+ _adb_util_list_files $serial "${cur}"
+ fi
+}
+
+_adb_cmd_pull() {
+ local serial IFS=$'\n' i cur
+
+ serial=$1
+ i=$2
+
+ cur="${COMP_WORDS[COMP_CWORD]}"
+
+ if [[ $COMP_CWORD == $i ]]; then
+ if [ "${cur}" == "" ]; then
+ cur="/"
+ fi
+ _adb_util_list_files $serial "${cur}"
+ elif [[ $COMP_CWORD == $(($i+1)) ]]; then
+ _adb_util_complete_local_file "${cur}"
+ fi
+}
+
+_adb_cmd_shell() {
+ local serial IFS=$'\n' i cur
+ local -a args
+
+ serial=$1
+ i=$2
+
+ cur="${COMP_WORDS[i]}"
+ if [ "$serial" != "none" ]; then
+ args=(-s $serial)
+ fi
+
+ if [[ $i -eq $COMP_CWORD && ${cur:0:1} != "/" ]]; then
+ paths=$(command adb ${args[@]} shell echo '$'PATH 2> /dev/null | tr -d '\r' | tr : '\n')
+ COMMAND=$(command adb ${args[@]} shell ls $paths '2>' /dev/null | tr -d '\r' | {
+ while read -r tmp; do
+ command=${tmp##*/}
+ printf '%s\n' "$command"
+ done
+ })
+ COMPREPLY=( $(compgen -W "$COMMAND" -- "$cur") )
+ return 0
+ fi
+
+ i=$((i+1))
+ case "$cur" in
+ ls)
+ _adb_shell_file_command $serial $i "--color -A -C -F -H -L -R -S -Z -a -c -d -f -h -i -k -l -m -n -p -q -r -s -t -u -x -1"
+ ;;
+ cat)
+ _adb_shell_file_command $serial $i "-h -e -t -u -v"
+ ;;
+ dumpsys)
+ _adb_cmd_shell_dumpsys "$serial" $i
+ ;;
+ am)
+ _adb_cmd_shell_am "$serial" $i
+ ;;
+ pm)
+ _adb_cmd_shell_pm "$serial" $i
+ ;;
+ /*)
+ _adb_util_list_files $serial "$cur"
+ ;;
+ *)
+ COMPREPLY=( )
+ ;;
+ esac
+
+ return 0
+}
+
+_adb_cmd_shell_dumpsys() {
+ local serial i cur
+ local -a args
+ local candidates
+
+ unset IFS
+
+ serial=$1
+ i=$2
+
+ if [ "$serial" != "none" ]; then
+ args=(-s $serial)
+ fi
+
+ if (( $i == $COMP_CWORD )) ; then
+ cur="${COMP_WORDS[COMP_CWORD]}"
+ # First line is a header, so need "1d".
+ candidates=$(command adb ${args[@]} shell dumpsys -l 2> /dev/null | sed -e '1d;s/^ *//' | tr -d '\r')
+ candidates="-l $candidates"
+ COMPREPLY=( $(compgen -W "$candidates" -- "$cur") )
+ return 0
+ fi
+
+ COMPREPLY=( )
+ return 0
+}
+
+_adb_cmd_shell_am() {
+ local serial i cur
+ local candidates
+
+ unset IFS
+
+ serial=$1
+ i=$2
+
+ if (( $i == $COMP_CWORD )) ; then
+ cur="${COMP_WORDS[COMP_CWORD]}"
+ candidates="broadcast clear-debug-app clear-watch-heap dumpheap force-stop get-config get-inactive hang idle-maintenance instrument kill kill-all monitor package-importance profile restart screen-compat send-trim-memory set-debug-app set-inactive set-watch-heap stack start startservice start-user stopservice stop-user suppress-resize-config-changes switch-user task to-app-uri to-intent-uri to-uri"
+ COMPREPLY=( $(compgen -W "$candidates" -- "$cur") )
+ return 0
+ fi
+
+ COMPREPLY=( )
+ return 0
+}
+
+
+_adb_cmd_shell_pm() {
+ local serial i cur
+ local candidates
+
+ unset IFS
+
+ serial=$1
+ i=$2
+
+ if (( $i == $COMP_CWORD )) ; then
+ cur="${COMP_WORDS[COMP_CWORD]}"
+ candidates="-l -lf -p clear create-user default-state disable"
+ candidates+=" disable-until-used disable-user dump enable"
+ candidates+=" get-app-link get-install-location get-max-users"
+ candidates+=" get-max-running-users grant hide install"
+ candidates+=" install-abandon install-commit install-create"
+ candidates+=" install-write list move-package"
+ candidates+=" move-primary-storage path remove-user"
+ candidates+=" reset-permissions revoke set-app-link"
+ candidates+=" set-installer set-install-location"
+ candidates+=" set-permission-enforced trim-caches unhide"
+ candidates+=" uninstall"
+ COMPREPLY=( $(compgen -W "$candidates" -- "$cur") )
+ return 0
+ fi
+
+ if (( $i + 1 == $COMP_CWORD )) && [[ "${COMP_WORDS[COMP_CWORD -1]}" == "list" ]] ; then
+ cur="${COMP_WORDS[COMP_CWORD]}"
+ candidates="packages permission-groups permissions instrumentation features libraries users"
+ COMPREPLY=( $(compgen -W "$candidates" -- "$cur") )
+ return 0
+ fi
+
+ COMPREPLY=( )
+ return 0
+}
+
+_adb_cmd_uninstall() {
+ local serial i where cur packages
+
+ serial=$1
+ i=$2
+ if [ "$serial" != "none" ]; then
+ args=(-s $serial)
+ fi
+
+ where=OPTIONS
+ for ((; i <= COMP_CWORD; i++)); do
+ cur="${COMP_WORDS[i]}"
+ case "${cur}" in
+ -*)
+ where=OPTIONS
+ ;;
+ *)
+ where=FILE
+ break
+ ;;
+ esac
+ done
+
+ cur="${COMP_WORDS[COMP_CWORD]}"
+ if [[ $where == OPTIONS ]]; then
+ COMPREPLY=( $(compgen -W "-k" -- "${cur}") )
+ fi
+
+ packages="$(
+ command adb ${args[@]} shell pm list packages '2>' /dev/null 2> /dev/null | tr -d '\r' | {
+ while read -r tmp; do
+ local package=${tmp#package:}
+ echo -n "${package} "
+ done
+ }
+ )"
+
+ COMPREPLY=( ${COMPREPLY[@]:-} $(compgen -W "${packages}" -- "${cur}") )
+}
+
+_adb_shell_file_command() {
+ local serial i cur file options
+ local -a args
+
+ serial=$1
+ i=$2
+ if [ "$serial" != "none" ]; then
+ args=(-s $serial)
+ fi
+ options=$3
+
+ where=OPTIONS
+ for ((; i <= COMP_CWORD; i++)); do
+ cur="${COMP_WORDS[i]}"
+ case "${cur}" in
+ -*)
+ where=OPTIONS
+ ;;
+ *)
+ where=FILE
+ break
+ ;;
+ esac
+ done
+
+ file="${COMP_WORDS[COMP_CWORD]}"
+ if [[ ${file} == "" ]]; then
+ file="/"
+ fi
+
+ case $where in
+ OPTIONS)
+ unset IFS
+ COMPREPLY=( $(compgen -W "$options" -- "$cur") )
+ ;;
+ FILE)
+ _adb_util_list_files $serial "$file"
+ ;;
+ esac
+
+ return 0
+}
+
+_adb_util_list_files() {
+ local serial dir IFS=$'\n'
+ local -a toks
+ local -a args
+
+ serial="$1"
+ file="$2"
+
+ if [ "$serial" != "none" ]; then
+ args=(-s $serial)
+ fi
+
+ if [[ $( command adb ${args[@]} shell ls -dF / '2>/dev/null' | tr -d '\r' ) == "d /" ]] ; then
+ toks=( ${toks[@]-} $(
+ command adb ${args[@]} shell ls -dF ${file}"*" '2>' /dev/null 2> /dev/null | tr -d '\r' | {
+ while read -r tmp; do
+ filetype=${tmp%% *}
+ filename=${tmp:${#filetype}+1}
+ if [[ ${filetype:${#filetype}-1:1} == d ]]; then
+ printf '%s/\n' "$filename"
+ else
+ printf '%s\n' "$filename"
+ fi
+ done
+ }
+ ))
+ else
+ toks=( ${toks[@]-} $(
+ command adb ${args[@]} shell ls -dp ${file}"*" '2>/dev/null' 2> /dev/null | tr -d '\r'
+ ))
+ fi
+
+ # Since we're probably doing file completion here, don't add a space after.
+ if [[ $(type -t compopt) = "builtin" ]]; then
+ compopt -o nospace
+ fi
+
+ COMPREPLY=( ${COMPREPLY[@]:-} "${toks[@]}" )
+}
+
+_adb_util_complete_local_file()
+{
+ local file xspec i j IFS=$'\n'
+ local -a dirs files
+
+ file=$1
+ xspec=$2
+
+ # Since we're probably doing file completion here, don't add a space after.
+ if [[ $(type -t compopt) = "builtin" ]]; then
+ compopt -o plusdirs
+ if [[ "${xspec}" == "" ]]; then
+ COMPREPLY=( ${COMPREPLY[@]:-} $(compgen -f -- "${cur}") )
+ else
+ compopt +o filenames
+ COMPREPLY=( ${COMPREPLY[@]:-} $(compgen -f -X "${xspec}" -- "${cur}") )
+ fi
+ else
+ # Work-around for shells with no compopt
+
+ dirs=( $(compgen -d -- "${cur}" ) )
+
+ if [[ "${xspec}" == "" ]]; then
+ files=( ${COMPREPLY[@]:-} $(compgen -f -- "${cur}") )
+ else
+ files=( ${COMPREPLY[@]:-} $(compgen -f -X "${xspec}" -- "${cur}") )
+ fi
+
+ COMPREPLY=( $(
+ for i in "${files[@]}"; do
+ local skip=
+ for j in "${dirs[@]}"; do
+ if [[ $i == $j ]]; then
+ skip=1
+ break
+ fi
+ done
+ [[ -n $skip ]] || printf "%s\n" "$i"
+ done
+ ))
+
+ COMPREPLY=( ${COMPREPLY[@]:-} $(
+ for i in "${dirs[@]}"; do
+ printf "%s/\n" "$i"
+ done
+ ))
+ fi
+}
+
+
+if [[ $(type -t compopt) = "builtin" ]]; then
+ complete -F _adb adb
+else
+ complete -o nospace -F _adb adb
+fi
