blob: e3fa306cf169859e47dec51cfe5532a4818d29f7 [file] [log] [blame]
//
// Copyright (C) 2015 Google, Inc.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at:
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
//
#pragma once
#include <memory>
#include <string>
#include <vector>
#include "service/common/bluetooth/adapter_state.h"
#include "service/common/bluetooth/remote_device_props.h"
namespace bluetooth {
class A2dpSinkFactory;
class A2dpSourceFactory;
class AvrcpControlFactory;
class AvrcpTargetFactory;
class GattClientFactory;
class GattServerFactory;
class LowEnergyAdvertiserFactory;
class LowEnergyScannerFactory;
class LowEnergyClientFactory;
// Represents the local Bluetooth adapter.
class Adapter {
public:
// The default values returned before the Adapter is fully initialized and
// powered. The complete values for these fields are obtained following a
// successful call to "Enable".
static const char kDefaultAddress[];
static const char kDefaultName[];
// Observer interface allows other classes to receive notifications from us.
// All of the methods in this interface are declared as optional to allow
// different layers to process only those events that they are interested in.
//
// All methods take in an |adapter| argument which points to the Adapter
// object that the Observer instance was added to.
class Observer {
public:
virtual ~Observer() = default;
// Called when there is a change in the state of the local Bluetooth
// |adapter| from |prev_state| to |new_state|.
virtual void OnAdapterStateChanged(Adapter* adapter,
AdapterState prev_state,
AdapterState new_state);
// Called when there is a change in the connection state between the local
// |adapter| and a remote device with address |device_address|. If the ACL
// state changes from disconnected to connected, then |connected| will be
// true and vice versa.
virtual void OnDeviceConnectionStateChanged(
Adapter* adapter, const std::string& device_address, bool connected);
// Called when scanning is enabled or disabled.
virtual void OnScanEnableChanged(Adapter* adapter, bool scan_enabled);
// Called when a SSP pairing request comes from a remote device.
virtual void OnSspRequest(Adapter* adapter,
const std::string& device_address,
const std::string& device_name, int cod,
int pairing_variant, int pass_key);
// Called when a remote device bond state changes.
virtual void OnBondStateChanged(Adapter* adapter, int status,
const std::string& device_address,
int state);
// Called in response to |GetBondedDevices|.
virtual void OnGetBondedDevices(
Adapter* adapter, int status,
const std::vector<std::string>& bonded_devices);
// Called in response to |GetRemoteDeviceProperties|.
virtual void OnGetRemoteDeviceProperties(Adapter* adapter, int status,
const std::string& device_address,
const RemoteDeviceProps& props);
// Called when a device is found through scanning.
virtual void OnDeviceFound(Adapter* adapter,
const RemoteDeviceProps& props);
};
// Returns an Adapter implementation to be used in production. Don't use these
// in tests; use MockAdapter instead.
static std::unique_ptr<Adapter> Create();
Adapter(const Adapter&) = delete;
Adapter& operator=(const Adapter&) = delete;
virtual ~Adapter() = default;
// Add or remove an observer.
virtual void AddObserver(Observer* observer) = 0;
virtual void RemoveObserver(Observer* observer) = 0;
// Returns the current Adapter state.
virtual AdapterState GetState() const = 0;
// Returns true, if the adapter radio is current powered.
virtual bool IsEnabled() const = 0;
// Enables Bluetooth. This method will send a request to the Bluetooth adapter
// to power up its radio. Returns true, if the request was successfully sent
// to the controller, otherwise returns false. A successful call to this
// method only means that the enable request has been sent to the Bluetooth
// controller and does not imply that the operation itself succeeded.
virtual bool Enable() = 0;
// Powers off the Bluetooth radio. Returns true, if the disable request was
// successfully sent to the Bluetooth controller.
virtual bool Disable() = 0;
// Returns the name currently assigned to the local adapter.
virtual std::string GetName() const = 0;
// Sets the name assigned to the local Bluetooth adapter. This is the name
// that the local controller will present to remote devices.
virtual bool SetName(const std::string& name) = 0;
// Returns the local adapter addess in string form (XX:XX:XX:XX:XX:XX).
virtual std::string GetAddress() const = 0;
// Set discoverability mode.
virtual bool SetScanMode(int scan_mode) = 0;
// Enable or disable discoverability.
virtual bool SetScanEnable(bool scan_enable) = 0;
// Reply to an SSP request received in |OnSspRequest|.
virtual bool SspReply(const std::string& device_address, int variant,
bool accept, int32_t pass_key) = 0;
// Create a bond with device specified by |device_address|.
virtual bool CreateBond(const std::string& device_address, int transport) = 0;
// Returns true if the local adapter supports the Low-Energy
// multi-advertisement feature.
virtual bool IsMultiAdvertisementSupported() = 0;
// Returns true if the remote device with address |device_address| is
// currently connected. This is not a const method as it modifies the state of
// the associated internal mutex.
virtual bool IsDeviceConnected(const std::string& device_address) = 0;
// Returns the total number of trackable advertisements as supported by the
// underlying hardware.
virtual int GetTotalNumberOfTrackableAdvertisements() = 0;
// Returns true if hardware-backed scan filtering is supported.
virtual bool IsOffloadedFilteringSupported() = 0;
// Returns true if hardware-backed batch scanning is supported.
virtual bool IsOffloadedScanBatchingSupported() = 0;
// When the stack call completes, |OnGetBondedDevices| will be called.
virtual bool GetBondedDevices() = 0;
// When the stack call completets, |OnBondStateChanged| will be called.
virtual bool RemoveBond(const std::string& device_address) = 0;
// When the stack call completets, |OnGetRemoteDeviceProperties| will be
// called.
virtual bool GetRemoteDeviceProperties(const std::string& device_address) = 0;
// Returns a pointer to the A2dpSinkFactory. This can be used to
// register per-application A2dpSinkClient instances to perform A2DP sink
// operations.
virtual A2dpSinkFactory* GetA2dpSinkFactory() const = 0;
// Returns a pointer to the A2dpSourceFactory. This can be used to
// register per-application A2dpSourceClient instances to perform A2DP source
// operations.
virtual A2dpSourceFactory* GetA2dpSourceFactory() const = 0;
// Returns a pointer to the AvrcpControlFactory. This can be used to register
// per-application AvrcpControlClient instances to perform AVRCP control
// operations.
virtual AvrcpControlFactory* GetAvrcpControlFactory() const = 0;
// Returns a pointer to the AvrcpTargetFactory. This can be used to register
// per-application AvrcpTargetClient instances to perform AVRCP target
// operations.
virtual AvrcpTargetFactory* GetAvrcpTargetFactory() const = 0;
// Returns a pointer to the LowEnergyClientFactory. This can be used to
// register per-application LowEnergyClient instances to perform BLE GAP
// operations.
virtual LowEnergyClientFactory* GetLowEnergyClientFactory() const = 0;
// Returns a pointer to the LowEnergyScannerFactory. This can be used to
// register per-application LowEnergyScanner instances to perform scanning.
virtual LowEnergyScannerFactory* GetLeScannerFactory() const = 0;
// Returns a pointer to the LowEnergyAdvertiserFactory. This can be used to
// register per-application LowEnergyAdvertiser instances to perform
// advertising.
virtual LowEnergyAdvertiserFactory* GetLeAdvertiserFactory() const = 0;
// Returns a pointer to the GattClientFactory. This can be used to register
// per-application GATT server instances.
virtual GattClientFactory* GetGattClientFactory() const = 0;
// Returns a pointer to the GattServerFactory. This can be used to register
// per-application GATT server instances.
virtual GattServerFactory* GetGattServerFactory() const = 0;
protected:
Adapter() = default;
};
} // namespace bluetooth