| <?Xm version="1.0" encoding="utf-8"?> |
| <!-- |
| ~ Copyright (C) 2015 The Android Open Source Project |
| ~ |
| ~ Licensed under the Apache License, Version 2.0 (the "License"); |
| ~ you may not use this file except in compliance with the License. |
| ~ You may obtain a copy of the License at |
| ~ |
| ~ http://www.apache.org/licenses/LICENSE-2.0 |
| ~ |
| ~ Unless required by applicable law or agreed to in writing, software |
| ~ distributed under the License is distributed on an "AS IS" BASIS, |
| ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| ~ See the License for the specific language governing permissions and |
| ~ limitations under the License. |
| --> |
| |
| <resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2"> |
| <!-- Name of this application. It appears in TV app UI, as one of available TV inputs. --> |
| <string name="bt_app_name">TV Tuner</string> |
| <!-- Name of this application when one uses USB tuners. It appears in TV app UI, as one of |
| available TV inputs. --> |
| <string name="ut_app_name">USB TV Tuner</string> |
| <!-- Name of this application when one uses network tuners. It appears in TV app UI, as one of |
| available TV inputs. --> |
| <string name="nt_app_name">Network TV Tuner (BETA)</string> |
| <!-- Message shown when the scanning process is being canceled by a user and the scanning |
| process needs the time to wait to finish the processing --> |
| <string name="ut_setup_cancel">Please wait to finish processing</string> |
| <!-- Message shown when the scanned channels became invalid due to incompatible changes |
| found across application versions, hence a user is required to rescan the channels --> |
| <string name="ut_rescan_needed">Tuner software has been recently updated. Please re-scan the |
| channels.</string> |
| <!-- Message that says audio of the current channel is not available due to surround sound |
| of TV device disabled --> |
| <string name="ut_surround_sound_disabled">Enable surround sound in system sound settings to enable audio</string> |
| <!-- Message that says audio of the current channel is not available due to AC3 passthrough is not usable --> |
| <string name="audio_passthrough_not_supported">Cannot play audio. Please try another TV</string> |
| <!-- Usb Tuner setup common UI breadcrumb --> |
| <string name="ut_setup_breadcrumb">Channel tuner setup</string> |
| <!-- Title for TV Tuner main setup menu when no channel exists --> |
| <string name="bt_setup_new_title">TV Tuner setup</string> |
| <!-- Title for USB tuner main setup menu when no channel exists --> |
| <string name="ut_setup_new_title">USB channel tuner setup</string> |
| <!-- Title for network tuner main setup menu when no channel exists --> |
| <string name="nt_setup_new_title">Network tuner setup</string> |
| <!-- Description for TV tuner main setup menu when no channel exists --> |
| <string name="bt_setup_new_description">Verify your TV is connected to a TV signal |
| source.\n\nIf using an over-the-air antenna, you may need to adjust its placement or |
| direction to receive the most channels. For best results, place it high and near a |
| window.</string> |
| <!-- Description for USB tuner main setup menu when no channel exists --> |
| <string name="ut_setup_new_description">Verify the USB tuner is plugged in and connected |
| to a TV signal source.\n\nIf using an over-the-air antenna, you may need to adjust its |
| placement or direction to receive the most channels. For best results, |
| place it high and near a window.</string> |
| <!-- Description for network tuner main setup menu when no channel exists --> |
| <string name="nt_setup_new_description">Verify the network tuner is powered on and connected |
| to a TV signal source.\n\nIf using an over-the-air antenna, you may need to adjust its |
| placement or direction to receive the most channels. For best results, |
| place it high and near a window.</string> |
| <!-- Menu items for USB tuner main setup menu when no channel exists --> |
| <string-array name="ut_setup_new_choices"> |
| <!-- Continue setup --> |
| <item>Continue</item> |
| <!-- Exit setup --> |
| <item>Not now</item> |
| </string-array> |
| <!-- Title for tuner main setup menu when channel exists already --> |
| <string name="bt_setup_again_title">Rerun channel setup?</string> |
| <!-- Description for TV tuner main setup menu when channel exists already --> |
| <string name="bt_setup_again_description">This will remove the channels found from the TV |
| tuner and scan for new channels again.\n\nVerify your TV is connected to a TV signal |
| source.\n\nIf using an over-the-air antenna, you may need to adjust its placement or |
| direction to receive the most channels. For best results, place it high and near a |
| window.</string> |
| <!-- Description for USB tuner main setup menu when channel exists already --> |
| <string name="ut_setup_again_description">This will remove the channels found from the USB |
| tuner and scan for new channels again.\n\nVerify the USB tuner is plugged in and connected |
| to a TV signal source.\n\nIf using an over-the-air antenna, you may need to adjust its |
| placement or direction to receive the most channels. For best results, place it high and |
| near a window.</string> |
| <!-- Description for network tuner main setup menu when channel exists already --> |
| <string name="nt_setup_again_description">This will remove the channels found from the network |
| tuner and scan for new channels again.\n\nVerify the network tuner is powered on and |
| connected to a TV signal source.\n\nIf using an over-the-air antenna, you may need to adjust |
| its placement or direction to receive the most channels. For best results, place it high and |
| near a window.</string> |
| <!-- Menu items for USB tuner main setup menu when channel exists already --> |
| <string-array name="ut_setup_again_choices"> |
| <!-- Continue setup --> |
| <item>Continue</item> |
| <!-- Exit setup --> |
| <item>Cancel</item> |
| </string-array> |
| <!-- Title for connection type selection menu --> |
| <string name="ut_connection_title">Select the connection type</string> |
| <!-- Description for connection type selection menu --> |
| <string name="ut_connection_description">Choose Antenna if there is an external antenna |
| connected to the tuner. Choose Cable if your channels come from a cable service provider. |
| If you are not sure, both types will be scanned, but this may take longer.</string> |
| <!-- Menu items for connection type selection menu --> |
| <string-array name="ut_connection_choices"> |
| <!-- Signal coming from the antenna that carries over-the-air, terrestrial channels --> |
| <item>Antenna</item> |
| <!-- Signal for cable television channels --> |
| <item>Cable</item> |
| <!-- Not sure what type of connection is provided for channel scanning --> |
| <item>Not sure</item> |
| <item translatable="false">Development only</item> |
| </string-array> |
| <!-- Title for channel scanning menu. Use this title with built-in tuners --> |
| <string name="bt_channel_scan">TV tuner setup</string> |
| <!-- Title for channel scanning menu. Use this title with USB tuners --> |
| <string name="ut_channel_scan">USB channel tuner setup</string> |
| <!-- Title for channel scanning menu. Use this title with network tuners --> |
| <string name="nt_channel_scan">Network channel tuner setup</string> |
| <!-- Message that says channel is not yet scanned during channel scanning process --> |
| <string name="ut_channel_scan_time">This may take several minutes</string> |
| <!-- Message that says Tuner is not available --> |
| <string name="ut_channel_scan_tuner_unavailable">Tuner is temporarily not available or already |
| used by recording.</string> |
| <!-- Message that says channels are found during channel scanning process --> |
| <plurals name="ut_channel_scan_message"> |
| <item quantity="one">%1$d channel found</item> |
| <item quantity="other">%1$d channels found</item> |
| </plurals> |
| <!-- Title for a button which will stop channel scanning process --> |
| <string name="ut_stop_channel_scan">STOP CHANNEL SCAN</string> |
| |
| <!-- Title for lineup selection menu when TV lineups are found --> |
| <string name="ut_lineup_title_lineups_found" >Select a TV lineup</string> |
| <!-- Description for lineup selection menu when TV lineups are found.--> |
| <string name="ut_lineup_description_lineups_found" >Choose how you receive your TV signal.</string> |
| <!-- Title for lineup selection menu when no TV lineups is found --> |
| <string name="ut_lineup_title_lineups_not_found" >No TV lineups found</string> |
| <!-- Description for lineup selection menu when no TV lineups is found --> |
| <string name="ut_lineup_description_lineups_not_found" >Please make sure your device is connected to the internet and the zip code / postal code is correct.</string> |
| <!-- Title for lineup selection menu when fetching lineups --> |
| <string name="ut_lineup_title_fetching_lineups">Fetching TV lineups…</string> |
| <!-- Description for lineup selection menu when fetching lineups --> |
| <string name="ut_lineup_description_fetching_lineups">This may take a few minutes. Please wait…</string> |
| <!-- Description for a button when no channels match --> |
| <string name="ut_lineup_no_channels_matched">No channels match</string> |
| <!-- Number of matched channels for lineup selection menu when lineups were found --> |
| <plurals name="ut_lineup_channels_matched"> |
| <item quantity="one"><xliff:g id="channels_matched_one">%1$d</xliff:g> channel matches</item> |
| <item quantity="other"><xliff:g id="channels_matched_other">%1$d</xliff:g> channels match</item> |
| </plurals> |
| <!-- A button to select a specific TV lineup of channels for the channels received by a "Television Antenna" --> |
| <string name="ut_lineup_name_antenna">Antenna</string> |
| <!-- Title for channel scanning result menu when channels were found --> |
| <plurals name="ut_result_found_title"> |
| <item quantity="one">%1$d channel found</item> |
| <item quantity="other">%1$d channels found</item> |
| </plurals> |
| <!-- Channel description for channel scanning result menu when channels were found "scan again" should match the button in string ut_result_found_choices--> |
| <string name="ut_result_found_description">If that seems incorrect, try adjusting your antenna and scan again.</string> |
| <!-- Rescan description for channel scanning result menu when channels were found --> |
| <!-- Menu items for channel scanning result menu when channels were found --> |
| <string-array name="ut_result_found_choices"> |
| <item>Done</item> |
| <item>Scan again</item> |
| </string-array> |
| <!-- Title for channel scanning result menu when no channel was found --> |
| <string name="ut_result_not_found_title">No Channels found</string> |
| <!-- Description for channel scanning result menu when no channel was found --> |
| <string name="bt_result_not_found_description">The scan did not find any channels. Verify |
| your TV is connected to a TV signal source.\n\nIf using an over-the-air antenna, adjust |
| its placement or direction. For best results, place it high and near a window and scan |
| again.</string> |
| <!-- Description for channel scanning result menu when no channel was found with USB tuners--> |
| <string name="ut_result_not_found_description">The scan did not find any channels. Verify the |
| USB tuner is plugged in and connected to a TV signal source.\n\nIf using an over-the-air |
| antenna, adjust its placement or direction. For best results, place it high and near a |
| window and scan again.</string> |
| <!-- Description for channel scanning result menu when no channel was found with network |
| tuners --> |
| <string name="nt_result_not_found_description">The scan did not find any channels. Verify the |
| network tuner is powered on and connected to a TV signal source.\n\nIf using an over-the-air |
| antenna, adjust its placement or direction. For best results, place it high and near a |
| window and scan again.</string> |
| <!-- Menu items for channel scanning result menu when no channel was found --> |
| <string-array name="ut_result_not_found_choices"> |
| <item>Scan again</item> |
| <item>Done</item> |
| </string-array> |
| |
| <!-- Notification of USB channel tuner setup strings. --> |
| <!-- Name of notification channel which is for tuner setup. "USB Tuner" is a TV Tuner that is connected via a USB connection.--> |
| <string name="ut_setup_notification_channel_name" >USB Tuner setup</string> |
| <!-- Content title of the notification to launch the setup application of |
| USB tuner TV input for scanning channels. --> |
| <string name="ut_setup_notification_content_title">Scan for TV channels</string> |
| <!-- Content text and info of the notification to launch the setup application of |
| built-in tuner TV input for scanning channels. --> |
| <string name="bt_setup_notification_content_text">TV Tuner setup</string> |
| <!-- Content text and info of the notification to launch the setup application of |
| USB tuner TV input for scanning channels. --> |
| <string name="ut_setup_notification_content_text">USB TV Tuner setup</string> |
| <!-- Content text and info of the notification to launch the setup application of |
| network tuner TV input for scanning channels. --> |
| <string name="nt_setup_notification_content_text">Network TV Tuner setup</string> |
| |
| <!-- Message when USB tuner device is unplugged or disconnected. [CHAR LIMIT=NONE] --> |
| <string name="msg_usb_tuner_disconnected">USB TV tuner disconnected.</string> |
| <!-- Message when Network tuner device is unplugged or disconnected. [CHAR LIMIT=NONE] --> |
| <string name="msg_network_tuner_disconnected">Network tuner disconnected.</string> |
| |
| <!-- Title of postal/zip code input guided step fragment [CHAR LIMIT=30] --> |
| <string name="postal_code_guidance_title">Enter your ZIP Code.</string> |
| <!-- Description of postal/zip code input guided step fragment [CHAR LIMIT=NONE] --> |
| <string name="postal_code_guidance_description">Live TV app will use the ZIP Code to provide a complete program guide for the TV channels.</string> |
| <!-- Description of postal/zip code input edit text view to prompt users entering ZIP Code [CHAR LIMIT=30] --> |
| <string name="postal_code_action_description">Enter your ZIP Code</string> |
| <!-- Warning message shown in description field of postal/zip code input edit text view when user enters an invalid ZIP Code and presses Done [CHAR LIMIT=30] --> |
| <string name="postal_code_invalid_warning">Invalid ZIP Code</string> |
| |
| </resources> |