usbtuner-res/values/strings.xml - platform/packages/apps/TV - Git at Google

 <?Xm version="1.0" encoding="utf-8"?>
 <!--
   ~ Copyright (C) 2015 The Android Open Source Project
   ~
   ~ Licensed under the Apache License, Version 2.0 (the "License");
   ~ you may not use this file except in compliance with the License.
   ~ You may obtain a copy of the License at
   ~
   ~      http://www.apache.org/licenses/LICENSE-2.0
   ~
   ~ Unless required by applicable law or agreed to in writing, software
   ~ distributed under the License is distributed on an "AS IS" BASIS,
   ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
   ~ See the License for the specific language governing permissions and
   ~ limitations under the License.
   -->

 <resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
     <!-- Name of this application. It appears in TV app UI, as one of available TV inputs. -->
     <string name="bt_app_name">TV Tuner</string>
     <!-- Name of this application when one uses USB tuner. It appears in TV app UI, as one of
          available TV inputs. -->
     <string name="ut_app_name">USB TV Tuner</string>
     <!-- Title for an action which turns a feature on [CHAR LIMIT=30] -->
     <string name="ut_setup_on">On</string>
     <!-- Title for an action which turns a feature off [CHAR LIMIT=30] -->
     <string name="ut_setup_off">Off</string>
     <!-- Message shown when the scanning process is being canceled by a user and the scanning
          process needs the time to wait to finish the processing -->
     <string name="ut_setup_cancel">Please wait to finish processing</string>
     <!-- Message that asks a user to select the type of signal to be used for input among
          the choices like terrestrial, cable, or satellite -->
     <string name="ut_select_channel_map">Select your channel source</string>
     <!-- Message that indicates TV input signal is lost due to physical disconnection or bad
          reception -->
     <string name="ut_no_signal">No Signal</string>
     <!-- Message that says TV failed to change to a channel (or tune) -->
     <string name="ut_fail_to_tune">Failed to tune to <xliff:g id="channel_name">%s</xliff:g></string>
     <!-- Message that says TV failed to change(or tune) to a channel which has no title -->
     <string name="ut_fail_to_tune_to_unknown_channel">Failed to tune</string>
     <!-- Message shown when the scanned channels became invalid due to incompatible changes
          found across application versions, hence a user is required to rescan the channels -->
     <string name="ut_rescan_needed">Tuner software has been recently updated. Please re-scan the
         channels.</string>
     <!-- Message that says audio of the current channel is not available due to surround sound
          of TV device disabled -->
     <string name="ut_surround_sound_disabled">Enable surround sound in system sound settings to enable audio</string>
     <!-- Usb Tuner setup common UI breadcrumb -->
     <string name="ut_setup_breadcrumb">Channel tuner setup</string>
     <!-- Title for TV Tuner main setup menu when no channel exists -->
     <string name="bt_setup_new_title">TV Tuner setup</string>
     <!-- Title for USB tuner main setup menu when no channel exists -->
     <string name="ut_setup_new_title">USB channel tuner setup</string>
     <!-- Description for TV tuner main setup menu when no channel exists -->
     <string name="bt_setup_new_description">Verify your TV is connected to a TV signal
         source.\n\nIf using an over-the-air antenna, you may need to adjust its placement or
         direction to receive the most channels. For best results, place it high and near a
         window.</string>
     <!-- Description for USB tuner main setup menu when no channel exists -->
     <string name="ut_setup_new_description">Verify the USB tuner is plugged in and connected
         to a TV signal source.\n\nIf using an over-the-air antenna, you may need to adjust its
         placement or direction to receive the most channels. For best results,
         place it high and near a window.</string>
     <!-- Menu items for USB tuner main setup menu when no channel exists -->
     <string-array name="ut_setup_new_choices">
         <!-- Continue setup -->
         <item>Continue</item>
         <!-- Exit setup -->
         <item>Not now</item>
     </string-array>
     <!-- Title for tuner main setup menu when channel exists already -->
     <string name="bt_setup_again_title">Rerun channel setup?</string>
     <!-- Description for TV tuner main setup menu when channel exists already -->
     <string name="bt_setup_again_description">This will remove the channels found from the TV
         tuner and scan for new channels again.\n\nVerify your TV is connected to a TV signal
         source.\n\nIf using an over-the-air antenna, you may need to adjust its placement or
         direction to receive the most channels. For best results, place it high and near a
         window.</string>
     <!-- Description for USB tuner main setup menu when channel exists already -->
     <string name="ut_setup_again_description">This will remove the channels found from the USB
         tuner and scan for new channels again.\n\nVerify the USB tuner is plugged in and connected
         to a TV signal source.\n\nIf using an over-the-air antenna, you may need to adjust its
         placement or direction to receive the most channels. For best results, place it high and
         near a window.</string>
     <!-- Menu items for USB tuner main setup menu when channel exists already -->
     <string-array name="ut_setup_again_choices">
         <!-- Continue setup -->
         <item>Continue</item>
         <!-- Exit setup -->
         <item>Cancel</item>
     </string-array>
     <!-- Title for connection type selection menu -->
     <string name="ut_connection_title">Select the connection type</string>
     <!-- Description for connection type selection menu -->
     <string name="ut_connection_description">Choose Antenna if there is an external antenna
         connected to the tuner. Choose Cable if your channels come from a cable service provider.
         If you are not sure, both types will be scanned, but this may take longer.</string>
     <!-- Menu items for connection type selection menu -->
     <string-array name="ut_connection_choices">
         <!-- Signal coming from the antenna that carries over-the-air, terrestrial channels -->
         <item>Antenna</item>
         <!-- Signal for cable television channels -->
         <item>Cable</item>
         <!-- Not sure what type of connection is provided for channel scanning -->
         <item>Not sure</item>
         <item translatable="false">Development only</item>
     </string-array>
     <!-- Title for channel scanning menu. Use this title with built-in tuners -->
     <string name="bt_channel_scan">TV tuner setup</string>
     <!-- Title for channel scanning menu. Use this title with USB tuners -->
     <string name="ut_channel_scan">USB channel tuner setup</string>
     <!-- Message that says channel is not yet scanned during channel scanning process -->
     <string name="ut_channel_scan_time">This may take several minutes</string>
     <!-- Message that says Tuner is not available -->
     <string name="ut_channel_scan_tuner_unavailable">Tuner is temporarily not available or already
         used by recording.</string>
     <!-- Message that says channels are found during channel scanning process -->
     <plurals name="ut_channel_scan_message">
         <item quantity="one">%1$d channel found</item>
         <item quantity="other">%1$d channels found</item>
     </plurals>
     <!-- Title for a button which will stop channel scanning process -->
     <string name="ut_stop_channel_scan">STOP CHANNEL SCAN</string>
     <!-- Title for channel scanning result menu when channels were found -->
     <plurals name="ut_result_found_title">
         <item quantity="one">%1$d channel found</item>
         <item quantity="other">%1$d channels found</item>
     </plurals>
     <!-- Description for channel scanning result menu when channels were found -->
     <plurals name="ut_result_found_description">
         <item quantity="one">Nice! %1$d channel was found during the channel scan.
             If this doesn’t seem right, try adjusting the antenna position and scan again.</item>
         <item quantity="other">Nice! %1$d channels were found during the channel scan.
             If this doesn’t seem right, try adjusting the antenna position and scan again.</item>
     </plurals>
     <!-- Menu items for channel scanning result menu when channels were found -->
     <string-array name="ut_result_found_choices">
         <item>Done</item>
         <item>Scan again</item>
     </string-array>
     <!-- Title for channel scanning result menu when no channel was found -->
     <string name="ut_result_not_found_title">No Channels found</string>
     <!-- Description for channel scanning result menu when no channel was found -->
     <string name="bt_result_not_found_description">The scan did not find any channels. Verify
         your TV is connected to a TV signal source.\n\nIf using an over-the-air antenna, adjust
         its placement or direction. For best results, place it high and near a window and scan
         again.</string>
     <!-- Description for channel scanning result menu when no channel was found -->
     <string name="ut_result_not_found_description">The scan did not find any channels. Verify the
         USB tuner is plugged in and connected to a TV signal source.\n\nIf using an over-the-air
         antenna, adjust its placement or direction. For best results, place it high and near a
         window and scan again.</string>
     <!-- Menu items for channel scanning result menu when no channel was found -->
     <string-array name="ut_result_not_found_choices">
         <item>Scan again</item>
         <item>Done</item>
     </string-array>

     <!-- Recommendation card of USB channel tuner setup strings. -->
     <!-- Content title of the recommendation card to launch the setup application of
          USB tuner TV input for scanning channels. This text is shown only when the card is
          focused. -->
     <string name="ut_setup_recommendation_card_focused_title">Scan for TV channels</string>
     <!-- Content text and info of the recommendation card to launch the setup application of
          built-in tuner TV input for scanning channels. -->
     <string name="bt_setup_recommendation_card_title">TV Tuner setup</string>
     <!-- Content text and info of the recommendation card to launch the setup application of
          USB tuner TV input for scanning channels. -->
     <string name="ut_setup_recommendation_card_title">USB TV Tuner setup</string>

     <!-- Message when usb tuner device is unplugged. [CHAR LIMIT=NONE] -->
     <string name="msg_usb_device_detached">USB TV tuner disconnected.</string>
 </resources>
	<?Xm version="1.0" encoding="utf-8"?>
	<!--
	~ Copyright (C) 2015 The Android Open Source Project
	~
	~ Licensed under the Apache License, Version 2.0 (the "License");
	~ you may not use this file except in compliance with the License.
	~ You may obtain a copy of the License at
	~
	~ http://www.apache.org/licenses/LICENSE-2.0
	~
	~ Unless required by applicable law or agreed to in writing, software
	~ distributed under the License is distributed on an "AS IS" BASIS,
	~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	~ See the License for the specific language governing permissions and
	~ limitations under the License.
	-->

	<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
	<!-- Name of this application. It appears in TV app UI, as one of available TV inputs. -->
	<string name="bt_app_name">TV Tuner</string>
	<!-- Name of this application when one uses USB tuner. It appears in TV app UI, as one of
	available TV inputs. -->
	<string name="ut_app_name">USB TV Tuner</string>
	<!-- Title for an action which turns a feature on [CHAR LIMIT=30] -->
	<string name="ut_setup_on">On</string>
	<!-- Title for an action which turns a feature off [CHAR LIMIT=30] -->
	<string name="ut_setup_off">Off</string>
	<!-- Message shown when the scanning process is being canceled by a user and the scanning
	process needs the time to wait to finish the processing -->
	<string name="ut_setup_cancel">Please wait to finish processing</string>
	<!-- Message that asks a user to select the type of signal to be used for input among
	the choices like terrestrial, cable, or satellite -->
	<string name="ut_select_channel_map">Select your channel source</string>
	<!-- Message that indicates TV input signal is lost due to physical disconnection or bad
	reception -->
	<string name="ut_no_signal">No Signal</string>
	<!-- Message that says TV failed to change to a channel (or tune) -->
	<string name="ut_fail_to_tune">Failed to tune to <xliff:g id="channel_name">%s</xliff:g></string>
	<!-- Message that says TV failed to change(or tune) to a channel which has no title -->
	<string name="ut_fail_to_tune_to_unknown_channel">Failed to tune</string>
	<!-- Message shown when the scanned channels became invalid due to incompatible changes
	found across application versions, hence a user is required to rescan the channels -->
	<string name="ut_rescan_needed">Tuner software has been recently updated. Please re-scan the
	channels.</string>
	<!-- Message that says audio of the current channel is not available due to surround sound
	of TV device disabled -->
	<string name="ut_surround_sound_disabled">Enable surround sound in system sound settings to enable audio</string>
	<!-- Usb Tuner setup common UI breadcrumb -->
	<string name="ut_setup_breadcrumb">Channel tuner setup</string>
	<!-- Title for TV Tuner main setup menu when no channel exists -->
	<string name="bt_setup_new_title">TV Tuner setup</string>
	<!-- Title for USB tuner main setup menu when no channel exists -->
	<string name="ut_setup_new_title">USB channel tuner setup</string>
	<!-- Description for TV tuner main setup menu when no channel exists -->
	<string name="bt_setup_new_description">Verify your TV is connected to a TV signal
	source.\n\nIf using an over-the-air antenna, you may need to adjust its placement or
	direction to receive the most channels. For best results, place it high and near a
	window.</string>
	<!-- Description for USB tuner main setup menu when no channel exists -->
	<string name="ut_setup_new_description">Verify the USB tuner is plugged in and connected
	to a TV signal source.\n\nIf using an over-the-air antenna, you may need to adjust its
	placement or direction to receive the most channels. For best results,
	place it high and near a window.</string>
	<!-- Menu items for USB tuner main setup menu when no channel exists -->
	<string-array name="ut_setup_new_choices">
	<!-- Continue setup -->
	<item>Continue</item>
	<!-- Exit setup -->
	<item>Not now</item>
	</string-array>
	<!-- Title for tuner main setup menu when channel exists already -->
	<string name="bt_setup_again_title">Rerun channel setup?</string>
	<!-- Description for TV tuner main setup menu when channel exists already -->
	<string name="bt_setup_again_description">This will remove the channels found from the TV
	tuner and scan for new channels again.\n\nVerify your TV is connected to a TV signal
	source.\n\nIf using an over-the-air antenna, you may need to adjust its placement or
	direction to receive the most channels. For best results, place it high and near a
	window.</string>
	<!-- Description for USB tuner main setup menu when channel exists already -->
	<string name="ut_setup_again_description">This will remove the channels found from the USB
	tuner and scan for new channels again.\n\nVerify the USB tuner is plugged in and connected
	to a TV signal source.\n\nIf using an over-the-air antenna, you may need to adjust its
	placement or direction to receive the most channels. For best results, place it high and
	near a window.</string>
	<!-- Menu items for USB tuner main setup menu when channel exists already -->
	<string-array name="ut_setup_again_choices">
	<!-- Continue setup -->
	<item>Continue</item>
	<!-- Exit setup -->
	<item>Cancel</item>
	</string-array>
	<!-- Title for connection type selection menu -->
	<string name="ut_connection_title">Select the connection type</string>
	<!-- Description for connection type selection menu -->
	<string name="ut_connection_description">Choose Antenna if there is an external antenna
	connected to the tuner. Choose Cable if your channels come from a cable service provider.
	If you are not sure, both types will be scanned, but this may take longer.</string>
	<!-- Menu items for connection type selection menu -->
	<string-array name="ut_connection_choices">
	<!-- Signal coming from the antenna that carries over-the-air, terrestrial channels -->
	<item>Antenna</item>
	<!-- Signal for cable television channels -->
	<item>Cable</item>
	<!-- Not sure what type of connection is provided for channel scanning -->
	<item>Not sure</item>
	<item translatable="false">Development only</item>
	</string-array>
	<!-- Title for channel scanning menu. Use this title with built-in tuners -->
	<string name="bt_channel_scan">TV tuner setup</string>
	<!-- Title for channel scanning menu. Use this title with USB tuners -->
	<string name="ut_channel_scan">USB channel tuner setup</string>
	<!-- Message that says channel is not yet scanned during channel scanning process -->
	<string name="ut_channel_scan_time">This may take several minutes</string>
	<!-- Message that says Tuner is not available -->
	<string name="ut_channel_scan_tuner_unavailable">Tuner is temporarily not available or already
	used by recording.</string>
	<!-- Message that says channels are found during channel scanning process -->
	<plurals name="ut_channel_scan_message">
	<item quantity="one">%1$d channel found</item>
	<item quantity="other">%1$d channels found</item>
	</plurals>
	<!-- Title for a button which will stop channel scanning process -->
	<string name="ut_stop_channel_scan">STOP CHANNEL SCAN</string>
	<!-- Title for channel scanning result menu when channels were found -->
	<plurals name="ut_result_found_title">
	<item quantity="one">%1$d channel found</item>
	<item quantity="other">%1$d channels found</item>
	</plurals>
	<!-- Description for channel scanning result menu when channels were found -->
	<plurals name="ut_result_found_description">
	<item quantity="one">Nice! %1$d channel was found during the channel scan.
	If this doesn’t seem right, try adjusting the antenna position and scan again.</item>
	<item quantity="other">Nice! %1$d channels were found during the channel scan.
	If this doesn’t seem right, try adjusting the antenna position and scan again.</item>
	</plurals>
	<!-- Menu items for channel scanning result menu when channels were found -->
	<string-array name="ut_result_found_choices">
	<item>Done</item>
	<item>Scan again</item>
	</string-array>
	<!-- Title for channel scanning result menu when no channel was found -->
	<string name="ut_result_not_found_title">No Channels found</string>
	<!-- Description for channel scanning result menu when no channel was found -->
	<string name="bt_result_not_found_description">The scan did not find any channels. Verify
	your TV is connected to a TV signal source.\n\nIf using an over-the-air antenna, adjust
	its placement or direction. For best results, place it high and near a window and scan
	again.</string>
	<!-- Description for channel scanning result menu when no channel was found -->
	<string name="ut_result_not_found_description">The scan did not find any channels. Verify the
	USB tuner is plugged in and connected to a TV signal source.\n\nIf using an over-the-air
	antenna, adjust its placement or direction. For best results, place it high and near a
	window and scan again.</string>
	<!-- Menu items for channel scanning result menu when no channel was found -->
	<string-array name="ut_result_not_found_choices">
	<item>Scan again</item>
	<item>Done</item>
	</string-array>

	<!-- Recommendation card of USB channel tuner setup strings. -->
	<!-- Content title of the recommendation card to launch the setup application of
	USB tuner TV input for scanning channels. This text is shown only when the card is
	focused. -->
	<string name="ut_setup_recommendation_card_focused_title">Scan for TV channels</string>
	<!-- Content text and info of the recommendation card to launch the setup application of
	built-in tuner TV input for scanning channels. -->
	<string name="bt_setup_recommendation_card_title">TV Tuner setup</string>
	<!-- Content text and info of the recommendation card to launch the setup application of
	USB tuner TV input for scanning channels. -->
	<string name="ut_setup_recommendation_card_title">USB TV Tuner setup</string>

	<!-- Message when usb tuner device is unplugged. [CHAR LIMIT=NONE] -->
	<string name="msg_usb_device_detached">USB TV tuner disconnected.</string>
	</resources>