blob: e5c63cb3e5868c9ddf560233c4983578836afa38 [file] [log] [blame]
<?xml version="1.0" encoding="utf-8"?>
<!-- Copyright (C) 2007 The Android Open Source Project
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
-->
<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
<!-- Strings for Dialog yes button -->
<string name="yes">"Yes"</string>
<!-- Strings for Dialog no button -->
<string name="no">"No"</string>
<!-- Strings for Dialog create button -->
<string name="create">Create</string>
<!-- Strings for Dialog allow button -->
<string name="allow">Allow</string>
<!-- Strings for Dialog deny button -->
<string name="deny">Deny</string>
<!-- Strings for Dialog close button [CHAR LIMIT=20] -->
<string name="dlg_close">Close</string>
<!-- Strings for Dialog switch button [CHAR LIMIT=20] -->
<string name="dlg_switch">Switch</string>
<!-- Device Info --> <skip />
<!-- Device Info screen. Used for a status item's value when the proper value is not known -->
<string name="device_info_default">Unknown</string>
<!-- [CHAR LIMIT=NONE] Device Info screen. Countdown for user taps to enable development settings -->
<plurals name="show_dev_countdown">
<item quantity="one">You are now <xliff:g id="step_count">%1$d</xliff:g> step away from being a developer.</item>
<item quantity="other">You are now <xliff:g id="step_count">%1$d</xliff:g> steps away from being a developer.</item>
</plurals>
<!-- [CHAR LIMIT=NONE] Device Info screen. Confirmation that developer settings are enabled -->
<string name="show_dev_on">You are now a developer!</string>
<!-- [CHAR LIMIT=NONE] Device Info screen. Okay we get it, stop pressing, you already have it on -->
<string name="show_dev_already">No need, you are already a developer.</string>
<!-- Category headings in left-pane header menu --> <skip />
<!-- Settings main menu category heading. Wireless and networks (Wi-Fi, Bluetooth, data usage...). [CHAR LIMIT=40] -->
<string name="header_category_wireless_networks">Wireless &amp; networks</string>
<!-- Settings main menu category heading. Wireless and networks (Wi-Fi, Bluetooth, data usage...). [CHAR LIMIT=40] -->
<string name="header_category_connections">Connections</string>
<!-- Settings main menu category heading. Device (Sound, display, battery, applications...). [CHAR LIMIT=40] -->
<string name="header_category_device">Device</string>
<!-- Settings main menu category heading. Personal (Accounts, security, language, backup...). [CHAR LIMIT=40] -->
<string name="header_category_personal">Personal</string>
<!-- Settings main menu category heading. Personal (Accounts, security, language, backup...). [CHAR LIMIT=40] -->
<string name="header_category_access">Access</string>
<!-- Settings main menu category heading. System (Updates, data, accessibility, about phone). [CHAR LIMIT=40] -->
<string name="header_category_system">System</string>
<!-- Phone info -->
<!-- Phone Info screen. Button label to turn on the radio . Only shown in diagnostic screen, so precise translation is not needed. -->
<string name="turn_on_radio">Turn on radio</string>
<!-- Phone Info screen. Button label to turn off the radio . Only shown in diagnostic screen, so precise translation is not needed. -->
<string name="turn_off_radio">Turn off radio</string>
<!-- Phone SMS over IMS on. Only shown in diagnostic screen, so precise translation is not needed. -->
<string name="sms_over_ims_on">Turn on SMS over IMS</string>
<!-- Phone SMS over IMS off. Only shown in diagnostic screen, so precise translation is not needed. -->
<string name="sms_over_ims_off">Turn off SMS over IMS</string>
<!-- Phone SMS over IMS IMS registration required on. Only shown in diagnostic screen, so precise translation is not needed. -->
<string name="ims_reg_required_on">Turn on IMS registration required</string>
<!-- Phone IMS registration required off. Only shown in diagnostic screen, so precise translation is not needed. -->
<string name="ims_reg_required_off">Turn off IMS registration required</string>
<!-- VoLTE provisioning flag on. Only shown in diagnostic screen, so precise translation is not needed. -->
<string name="volte_provisioned_flag_on">Turn on VoLTE provisioned flag</string>
<!-- VoLTE provisioning flag off. Only shown in diagnostic screen, so precise translation is not needed. -->
<string name="volte_provisioned_flag_off">Turn off VoLTE provisioned flag</string>
<!-- Phone ram dump on. Only shown in diagnostic screen, so precise translation is not needed. -->
<string name="lte_ram_dump_on">Turn on lte ram dump</string>
<!-- Phone ram dump off. Only shown in diagnostic screen, so precise translation is not needed. -->
<string name="lte_ram_dump_off">Turn off lte ram dump</string>
<!-- Phone Info screen. Menu item label. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radioInfo_menu_viewADN">View SIM address book</string>
<!-- Phone Info screen. Menu item label. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radioInfo_menu_viewFDN">View Fixed Dialing Numbers</string>
<!-- Phone Info screen. Menu item label. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radioInfo_menu_viewSDN">View Service Dialing Numbers</string>
<!-- Phone Info screen. Menu item label. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radioInfo_menu_getPDP">Get PDP list</string>
<!-- Phone Info screen. Status label. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radioInfo_service_in">In service</string>
<!-- Phone Info screen. Status label. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radioInfo_service_out">Out of service</string>
<!-- Phone Info screen. Status label. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radioInfo_service_emergency">Emergency calls only</string>
<!-- Phone Info screen. Status label. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radioInfo_service_off">Radio off</string>
<!-- Phone Info screen. Status label. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radioInfo_roaming_in">Roaming</string>
<!-- Phone Info screen. Status label. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radioInfo_roaming_not">Not roaming</string>
<!-- Phone Info screen. Status label. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radioInfo_phone_idle">Idle</string>
<!-- Phone Info screen. Status label. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radioInfo_phone_ringing">Ringing</string>
<!-- Phone Info screen. Status label. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radioInfo_phone_offhook">Call in progress</string>
<!-- Phone Info screen. Status label. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radioInfo_data_disconnected">Disconnected</string>
<!-- Phone Info screen. Status label. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radioInfo_data_connecting">Connecting</string>
<!-- Phone Info screen. Status label. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radioInfo_data_connected">Connected</string>
<!-- Phone Info screen. Status label. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radioInfo_data_suspended">Suspended</string>
<!-- Used for diagnostic info screens, precise translation isn't needed -->
<string name="radioInfo_unknown">unknown</string>
<!-- Phone Info screen. Units shown after a value. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radioInfo_display_packets">pkts</string>
<!-- Phone Info screen. Units shown after a value. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radioInfo_display_bytes">bytes</string>
<!-- Phone Info screen. Units shown after a value. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radioInfo_display_dbm">dBm</string>
<!-- Phone Info screen. Units shown after a value. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radioInfo_display_asu">asu</string>
<!-- Used for diagnostic info screens, precise translation isn't needed -->
<string name="radioInfo_lac">LAC</string>
<!-- Used for diagnostic info screens, precise translation isn't needed -->
<string name="radioInfo_cid">CID</string>
<!-- Used for diagnostic info screens, precise translation isn't needed. Unmounts the SD card from the phone, meaning it will become available for an attached computer [CHAR LIMIT=25] -->
<string name="sdcard_unmount" product="nosdcard">Unmount USB storage</string>
<!-- Used for diagnostic info screens, precise translation isn't needed. Unmounts the SD card from the phone, meaning it will become available for an attached computer -->
<string name="sdcard_unmount" product="default">Unmount SD card</string>
<!-- Used for diagnostic info screens, precise translation isn't needed. Formats the SD card in the phone, meaning it will be erased and reformatted [CHAR LIMIT=25] -->
<string name="sdcard_format" product="nosdcard">Erase USB storage</string>
<!-- Used for diagnostic info screens, precise translation isn't needed. Formats the SD card in the phone, meaning it will be erased and reformatted -->
<string name="sdcard_format" product="default">Erase SD card</string>
<!-- choice for the font size spinner -->
<string name="small_font">Small</string>
<!-- choice for the font size spinner -->
<string name="medium_font">Medium</string>
<!-- choice for the font size spinner -->
<string name="large_font">Large</string>
<!-- Do not translate. label for font size preview. Does not need to be translated. -->
<string name="font_size_preview_text">Servez à ce monsieur une bière et des kiwis.</string>
<!-- Button. Chosen when they want to save the chosen text size. -->
<string name="font_size_save">OK</string>
<!-- Title for a notification shown. [CHAR LIMIT=25] -->
<string name="sdcard_setting" product="nosdcard">USB storage</string>
<!-- Title for a notification shown. -->
<string name="sdcard_setting" product="default">SD card</string>
<!-- Battery Info screen. Value for a status item. Used for diagnostic info screens, precise translation isn't needed -->
<string name="battery_info_status_unknown">Unknown</string>
<!-- [CHAR_LIMIT=20] Battery use screen. Battery status shown in chart label when charging from an unknown source. -->
<string name="battery_info_status_charging">Charging</string>
<!-- [CHAR_LIMIT=20] Battery use screen. Battery status shown in chart label when charging on AC. -->
<string name="battery_info_status_charging_ac">Charging on AC</string>
<!-- [CHAR_LIMIT=20] Battery use screen. Battery status shown in chart label when charging over USB. -->
<string name="battery_info_status_charging_usb">Charging over USB</string>
<!-- [CHAR_LIMIT=20] Battery use screen. Battery status shown in chart label when charging over a wireless connection. -->
<string name="battery_info_status_charging_wireless">Charging wirelessly</string>
<!-- Battery Info screen. Value for a status item. Used for diagnostic info screens, precise translation isn't needed -->
<string name="battery_info_status_discharging">Not charging</string>
<!-- Battery Info screen. Value for a status item. Used for diagnostic info screens, precise translation isn't needed -->
<string name="battery_info_status_not_charging">Not charging</string>
<!-- Battery Info screen. Value for a status item. Used for diagnostic info screens, precise translation isn't needed -->
<string name="battery_info_status_full">Full</string>
<!-- Used as setting title (for checkbox) on second screen after selecting Bluetooth settings -->
<string name="bluetooth">Bluetooth</string>
<!-- Bluetooth settings screen, summary after selecting Discoverable check box [CHAR LIMIT=50] -->
<string name="bluetooth_is_discoverable">Visible to all nearby Bluetooth devices (<xliff:g id="discoverable_time_period">%1$s</xliff:g>)</string>
<!-- Bluetooth settings screen, summary when Discoverable duration is set to "forever" [CHAR LIMIT=50] -->
<string name="bluetooth_is_discoverable_always">Visible to all nearby Bluetooth devices</string>
<!-- Bluetooth settings screen, summary text when not discoverable and no paired devices [CHAR LIMIT=50] -->
<string name="bluetooth_not_visible_to_other_devices">Not visible to other Bluetooth devices</string>
<!-- Bluetooth settings screen, summary text when not discoverable with paired devices [CHAR LIMIT=50] -->
<string name="bluetooth_only_visible_to_paired_devices">Only visible to paired devices</string>
<!-- Bluetooth settings screen, option name to pick discoverability timeout duration (a list dialog comes up) -->
<string name="bluetooth_visibility_timeout">Visibility timeout</string>
<!-- Bluetooth settings screen, check box label whether or not to allow
bluetooth voice dialing when lock screen is up-->
<string name="bluetooth_lock_voice_dialing">Lock voice dialing</string>
<!-- Bluetooth settings screen, lock voice dialing checkbox summary text -->
<string name="bluetooth_lock_voice_dialing_summary">
Prevent use of the bluetooth dialer when the screen is locked
</string>
<!-- Bluetooth settings screen, heading above the list of nearby bluetooth devices -->
<string name="bluetooth_devices">Bluetooth devices</string>
<!-- Bluetooth settings screen, title for the current bluetooth name setting -->
<string name="bluetooth_device_name">Device name</string>
<!-- Bluetooth settings screen, image description for device details button. This opens the screen to rename, unpair, etc. a single device. -->
<string name="bluetooth_device_details">Device settings</string>
<!-- Bluetooth settings screen, image description for profile of a device details button. -->
<string name="bluetooth_profile_details">Profile settings</string>
<!-- Bluetooth settings screen, summary text when there isn't a name set (for the name setting) -->
<string name="bluetooth_name_not_set">No name set, using account name</string>
<!-- Bluetooth settings screen, menu item to scan for nearby bluetooth devices -->
<string name="bluetooth_scan_for_devices">Scan for devices</string>
<!-- Bluetooth settings screen, menu item to change this device's Bluetooth name. [CHAR LIMIT=30] -->
<string name="bluetooth_rename_device">Rename this device</string>
<!-- Bluetooth settings screen, confirmation button for rename device dialog. [CHAR LIMIT=20] -->
<string name="bluetooth_rename_button">Rename</string>
<!-- Bluetooth settings. Dialog title to confirm disconnecting from all profiles of a device. [CHAR LIMIT=30] -->
<string name="bluetooth_disconnect_title">Disconnect?</string>
<!-- Bluetooth settings. Message for disconnecting from all profiles of a bluetooth device. [CHAR LIMIT=NONE] -->
<string name="bluetooth_disconnect_all_profiles">This will end your connection with:&lt;br>&lt;b><xliff:g id="device_name">%1$s</xliff:g>&lt;/b></string>
<!-- Bluetooth Settings. text displayed when user has restriction DISALLOW_CONFIG_BLUETOOTH [CHAR LIMIT=NONE]-->
<string name="bluetooth_empty_list_user_restricted">You don\u2019t have permission to change Bluetooth settings.</string>
<!-- Bluetooth Visibility message. This message informs the user that their device is now visible to other bluetooth devices. [CHAR LIMIT=NONE] -->
<string name="bluetooth_is_visible_message"><xliff:g id="device_name">%1$s</xliff:g> is visible to nearby devices while Bluetooth settings is open.</string>
<!-- Bluetooth Visibility discoonect question. Asks the user if they wish to disconnect a paired bluetooth device. [CHAR LIMIT=50] -->
<string name="bluetooth_is_disconnect_question">Disconnect <xliff:g id="device_name">%1$s</xliff:g>?</string>
<!-- Bluetooth broadcasting settings, option to enable/disable broadcasting -->
<string name="bluetooth_broadcasting">Broadcasting</string>
<!-- Bluetooth settings. Dialog title to disable a single profile of a device. [CHAR LIMIT=40] -->
<string name="bluetooth_disable_profile_title">Disable profile?</string>
<!-- Bluetooth settings. Message for disabling a profile of a bluetooth device. [CHAR LIMIT=NONE] -->
<string name="bluetooth_disable_profile_message">This will disable:&lt;br>&lt;b><xliff:g id="profile_name">%1$s</xliff:g>&lt;/b>&lt;br>&lt;br>From:&lt;br>&lt;b><xliff:g id="device_name">%2$s</xliff:g>&lt;/b></string>
<!-- Bluetooth settings. Message when the device state is unknown -->
<string name="bluetooth_unknown" />
<!--Bluetooth settings screen, summary text for Bluetooth device with no name -->
<string name="bluetooth_device">Unnamed Bluetooth device</string>
<!--Bluetooth settings screen, text that appears in heading bar when scanning for devices -->
<string name="progress_scanning">Searching</string>
<!--Bluetooth settings screen, text that appears when scanning for devices is finished and no nearby bluetooth device was found [CHAR LIMIT=40]-->
<string name="bluetooth_no_devices_found">No nearby Bluetooth devices were found.</string>
<!-- Notification ticker text (shown in the status bar) when a Bluetooth device wants to pair with us -->
<string name="bluetooth_notif_ticker">Bluetooth pairing request</string>
<!-- Notification title when a Bluetooth device wants to pair with us -->
<string name="bluetooth_notif_title">Pairing request</string>
<!-- Notification message when a Bluetooth device wants to pair with us -->
<string name="bluetooth_notif_message">Touch to pair with <xliff:g id="device_name">%1$s</xliff:g>.</string>
<!-- Bluetooth settings screen, menu to show the list of received files [CHAR LIMIT=30] -->
<string name="bluetooth_show_received_files">Show received files</string>
<!-- Strings for BluetoothDevicePicker [CHAR LIMIT=40]-->
<string name="device_picker">Choose Bluetooth device</string>
<!-- Strings for dialog title when asking to the user whether to allow an app to enable discovery mode -->
<string name="bluetooth_permission_request">"Bluetooth permission request"</string>
<!-- This string asks the user whether or not to allow an app to enable bluetooth. [CHAR LIMIT=100] -->
<string name="bluetooth_ask_enablement">An app wants to turn Bluetooth ON for this device.</string>
<!-- Strings for asking to the user whether to allow an app to enable discovery mode -->
<string name="bluetooth_ask_discovery" product="tablet">An app wants to make your tablet visible to other Bluetooth devices for <xliff:g id="timeout">%1$d</xliff:g> seconds.</string>
<!-- Strings for asking to the user whether to allow an app to enable discovery mode -->
<string name="bluetooth_ask_discovery" product="default">An app wants to make your phone visible to other Bluetooth devices for <xliff:g id="timeout">%1$d</xliff:g> seconds.</string>
<!-- Strings for asking to the user whether to allow an app to enable lasting discovery mode -->
<string name="bluetooth_ask_lasting_discovery" product="tablet">An app wants to make your tablet visible to other Bluetooth devices. You can change this later in Bluetooth settings.</string>
<string name="bluetooth_ask_lasting_discovery" product="default">An app wants to make your phone visible to other Bluetooth devices. You can change this later in Bluetooth settings.</string>
<!-- Strings for asking to the user whether to allow an app to start broadcasting -->
<string name="bluetooth_ask_start_broadcast" product="default"><xliff:g id="app_name">%1$s</xliff:g> wants to turn on Bluetooth broadcasting to communicate with other devices nearby. You can change this later in Bluetooth settings.</string>
<!-- Strings for asking to the user whether to allow an app to enable bluetooth and start broadcasting -->
<string name="bluetooth_ask_enablement_and_start_broadcast" product="default"><xliff:g id="app_name">%1$s</xliff:g> wants to turn on Bluetooth and Bluetooth broadcasting to communicate with other devices nearby. You can change this later in Bluetooth settings.</string>
<!-- Strings for bluetooth broadcasting explanation -->
<string name="bluetooth_broadcasting_explaination" product="default">When this feature is turned on, your phone can communicate with other devices nearby.\n\nBroadcasting uses low-power Bluetooth signals.</string>
<!-- Strings for asking to the user whether to allow an app to enable bluetooth and discovery mode -->
<string name="bluetooth_ask_enablement_and_discovery" product="tablet">An app wants to turn on Bluetooth and make your tablet visible to other devices for <xliff:g id="timeout">%1$d</xliff:g> seconds.</string>
<!-- Strings for asking to the user whether to allow an app to enable bluetooth and discovery mode -->
<string name="bluetooth_ask_enablement_and_discovery" product="default">An app wants to turn on Bluetooth and make your phone visible to other devices for <xliff:g id="timeout">%1$d</xliff:g> seconds.</string>
<!-- Strings for asking to the user whether to allow an app to enable bluetooth and discovery mode -->
<string name="bluetooth_ask_enablement_and_lasting_discovery" product="tablet">An app wants to turn on Bluetooth and make your tablet visible to other devices. You can change this later in Bluetooth settings.</string>
<string name="bluetooth_ask_enablement_and_lasting_discovery" product="default">An app wants to turn on Bluetooth and make your phone visible to other devices. You can change this later in Bluetooth settings.</string>
<!-- Strings for msg to display to user while bluetooth is turning on [CHAR LIMIT=60] -->
<string name="bluetooth_turning_on">"Turning Bluetooth on\u2026"</string>
<!-- Strings for msg to display to user while bluetooth is turning off [CHAR LIMIT=60] -->
<string name="bluetooth_turning_off">"Turning Bluetooth off\u2026"</string>
<!-- Strings for device profile auto connect setting -->
<string name="bluetooth_auto_connect">Auto-connect</string>
<!-- Activity label of BluetoothPermissionActivity [CHAR LIMIT=none]-->
<string name="bluetooth_connection_permission_request">"Bluetooth connection request"</string>
<!-- Notification message when a remote Bluetooth device wants to connect to a Bluetooth profile [CHAR LIMIT=none]-->
<string name="bluetooth_connection_notif_message">"Touch to connect to \u0022<xliff:g id="device_name">%1$s</xliff:g>\u0022."</string>
<!-- Bluetooth connection permission Alert Activity text [CHAR LIMIT=none]-->
<string name="bluetooth_connection_dialog_text">"Do you want to connect to \u0022<xliff:g id="device_name">%1$s</xliff:g>\u0022?"</string>
<!-- Activity label of BluetoothPbPermissionActivity, also used as Strings in the permission dialog [CHAR LIMIT=none] -->
<string name="bluetooth_phonebook_request">"Phone book access request"</string>
<!-- Bluetooth phone book permission Alert Activity text [CHAR LIMIT=none] -->
<string name="bluetooth_pb_acceptance_dialog_text">%1$s wants to access your contacts and call history. Give access to %2$s?</string>
<!-- Bluetooth phone book permission Alert Activity checkbox text [CHAR LIMIT=none] -->
<string name="bluetooth_remember_choice">Don\u2019t ask again</string>
<!--FIXME SHOULD BE REMOVED AND ALL LANG VERSIONS FIXED TO ABOVE NAME -->
<string name="bluetooth_pb_remember_choice">Don\u2019t ask again</string>
<!-- Activity label of BluetoothMessagePermissionActivity, also used as Strings in the permission dialog [CHAR LIMIT=none] -->
<string name="bluetooth_map_request">"Message access request"</string>
<!-- Bluetooth message permission Alert Activity text [CHAR LIMIT=none] -->
<string name="bluetooth_map_acceptance_dialog_text">%1$s wants to access your messages. Give access to %2$s?</string>
<!-- Activity label of BluetoothMessagePermissionActivity for SIM access profile. Also used as Strings in the permission dialog [CHAR LIMIT=none] -->
<string name="bluetooth_sap_request">"SIM access request"</string>
<!-- Bluetooth SIM access permission Alert Activity text [CHAR LIMIT=none] -->
<string name="bluetooth_sap_acceptance_dialog_text"><xliff:g id="device_name">%1$s</xliff:g> wants to access your SIM card. Granting access to the SIM card will disable data connectivity on your device for the duration of the connection. Give access to <xliff:g id="device_name">%2$s?</xliff:g></string>
<!-- Date & time settings screen title -->
<string name="date_and_time">Date &amp; time</string>
<!-- The title of the activity to pick a time zone. -->
<string name="choose_timezone">Choose time zone</string>
<!-- Label of preview text when tweaking font size -->
<string name="display_preview_label">Preview:</string>
<!-- Label for chosen font size -->
<string name="display_font_size_label">Font size:</string>
<!-- Used for diagnostic screens, precise translation is not necessary -->
<string name="intent_sender_data_label"><xliff:g id="data">Data:</xliff:g></string>
<!-- Used for diagnostic screens, precise translation is not necessary -->
<string name="intent_sender_sendbroadcast_text">Send <xliff:g id="broadcast">broadcast</xliff:g></string>
<!-- Used for diagnostic screens, precise translation is not necessary -->
<string name="intent_sender_action_label"><xliff:g id="action">Action</xliff:g>:</string>
<!-- Used for diagnostic screens, precise translation is not necessary -->
<string name="intent_sender_startactivity_text">Start <xliff:g id="activity">activity</xliff:g></string>
<!-- Used for diagnostic screens, precise translation is not necessary -->
<string name="intent_sender_resource_label"><xliff:g id="resource">Resource</xliff:g>: </string>
<!-- Used for diagnostic screens, precise translation is not necessary -->
<string name="intent_sender_account_label">Account: </string>
<!-- HTTP proxy settings title -->
<string name="proxy_settings_title">Proxy</string>
<!-- HTTP proxy settings. Button to clear the proxy box. -->
<string name="proxy_clear_text">Clear</string>
<!-- HTTP proxy settings. The port number label. -->
<string name="proxy_port_label">Proxy port</string>
<!-- HTTP proxy settings. The hint text field for port. -->
<string name="proxy_port_hint" translatable="false">8080</string>
<!-- HTTP proxy settings. The exclusion list label. -->
<string name="proxy_exclusionlist_label">Bypass proxy for</string>
<!-- HTTP proxy settings. The hint text for proxy exclusion list. [CHAR LIMIT=50]-->
<string name="proxy_exclusionlist_hint">example.com,mycomp.test.com,localhost</string>
<!-- HTTP proxy settings. The button to restore the defaults. -->
<string name="proxy_defaultView_text">Restore defaults</string>
<!-- HTTP proxy settings. The button to save. -->
<string name="proxy_action_text">Done</string>
<!-- HTTP proxy settings. The text field for the hostname -->
<string name="proxy_hostname_label">Proxy hostname</string>
<!-- HTTP proxy settings. The hint text field for the hostname. [CHAR LIMIT=50] -->
<string name="proxy_hostname_hint">proxy.example.com</string>
<!-- HTTP proxy settings. Title if there is an error-->
<string name="proxy_error">Attention</string>
<!-- HTTP proxy settings. Button to get rid of error box-->
<string name="proxy_error_dismiss">OK</string>
<!-- HTTP proxy settings. The error if the hostname is not valid -->
<string name="proxy_error_invalid_host">The hostname you typed isn\u2019t valid.</string>
<!-- HTTP proxy settings. The error if the exclusion list is not valid -->
<string name="proxy_error_invalid_exclusion_list">The exclusion list you typed isn\u2019t properly formatted. Type a comma-separated list of excluded domains.</string>
<!-- HTTP proxy settings. Error msg -->
<string name="proxy_error_empty_port">You need to complete the port field.</string>
<!-- HTTP proxy settings. Error msg -->
<string name="proxy_error_empty_host_set_port">The port field must be empty if the host field is empty.</string>
<!-- HTTP proxy settings. Error msg -->
<string name="proxy_error_invalid_port">The port you typed isn\u2019t valid.</string>
<!-- HTTP proxy settings. Warning message about limited application support [CHAR LIMIT=100]-->
<string name="proxy_warning_limited_support">The HTTP proxy is used by the browser but may not be used by the other apps.</string>
<!-- HTTP proxy settings. Title for Proxy-Auto Config URL. [CHAR LIMIT=25] -->
<string name="proxy_url_title">"PAC URL: "</string>
<!-- HTTP proxy settings. Hint for Proxy-Auto Config URL. -->
<string name="proxy_url_hint" translatable="false">https://www.example.com/proxy.pac</string>
<!-- Radio Info screen. Label for a status item. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radio_info_signal_location_label">Location:</string>
<!-- Radio Info screen. Label for a status item. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radio_info_neighboring_location_label">Neighboring CID:</string>
<!-- Radio Info screen. Label for a status item. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radio_info_cellinfo_label">CellInfo:</string>
<!-- Radio Info screen. Label for a status item. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radio_info_dcrtinfo_label">DcRtInfo:</string>
<!-- Radio Info screen. Label for a status item. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radio_info_data_attempts_label">Data attempts:</string>
<!-- Radio Info screen. Label for a status item. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radio_info_gprs_service_label">GPRS service:</string>
<!-- Radio Info screen. Label for a status item. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radio_info_roaming_label">Roaming:</string>
<!-- Radio Info screen. Label for a status item. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radio_info_imei_label">IMEI:</string>
<!-- Radio Info screen. Label for a status item. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radio_info_call_redirect_label">Call redirect:</string>
<!-- Radio Info screen. Label for a status item. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radio_info_ppp_resets_label">Number of PPP reset since boot:</string>
<!-- Radio Info screen. Label for a status item. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radio_info_gsm_disconnects_label">GSM disconnects:</string>
<!-- Radio Info screen. Label for a status item. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radio_info_current_network_label">Current network:</string>
<!-- Radio Info screen. Label for a status item. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radio_info_data_successes_label">Data successes:</string>
<!-- Radio Info screen. Label for a status item. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radio_info_ppp_received_label">PPP received:</string>
<!-- Radio Info screen. Label for a status item. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radio_info_gsm_service_label">GSM service:</string>
<!-- Radio Info screen. Label for a status item. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radio_info_signal_strength_label">Signal strength:</string>
<!-- Radio Info screen. Label for a status item. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radio_info_call_status_label">Call status:</string>
<!-- Radio Info screen. Label for a status item. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radio_info_ppp_sent_label">PPP sent:</string>
<!-- Radio Info screen. Label for a status item. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radio_info_radio_resets_label">Radio resets:</string>
<!-- Radio Info screen. Label for a status item. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radio_info_message_waiting_label">Message waiting:</string>
<!-- Radio Info screen. Label for a status item. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radio_info_phone_number_label">Phone number:</string>
<!-- Radio Info screen. Label for a status item. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radio_info_band_mode_label">Select radio band</string>
<!-- Radio Info screen. Label for a status item. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radio_info_network_type_label">Network type:</string>
<!-- Radio Info screen. Label for a status item. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radio_info_set_perferred_label">Set preferred network type:</string>
<!-- Radio Info screen. Label for a status item. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radio_info_ping_ipaddr">Ping IpAddr:</string>
<!-- Radio Info screen. Label for a status item. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radio_info_ping_hostname">Ping Hostname(www.google.com):</string>
<!-- Radio Info screen. Label for a status item. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radio_info_http_client_test">HTTP Client test:</string>
<!-- Radio Info screen. Label for a status item. Used for diagnostic info screens, precise translation isn't needed -->
<string name="ping_test_label">Run ping test</string>
<!-- Radio Info screen. Label for a status item. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radio_info_smsc_label">SMSC:</string>
<!-- Radio Info screen. Label for a status item. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radio_info_smsc_update_label">Update</string>
<!-- Radio Info screen. Label for a status item. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radio_info_smsc_refresh_label">Refresh</string>
<!-- Radio Info screen. Label for a status item. Used for diagnostic info screens, precise translation isn't needed -->
<string name="radio_info_toggle_dns_check_label">Toggle DNS check</string>
<!-- Radio Info screen. Label for a status item. Used for diagnostic info screens, precise translation isn't needed -->
<string name="oem_radio_info_label">OEM-specific Info/Settings</string>
<!-- Band Mode Selection -->
<!-- Band mode screen. Title of activity. -->
<string name="band_mode_title">Set GSM/UMTS band</string>
<!-- Band mode screen. Loading message. -->
<string name="band_mode_loading">Loading band list\u2026</string>
<!-- Band mode screen. Button caption to set the bandmode. -->
<string name="band_mode_set">Set</string>
<!-- Band mode screen. Status message when unsuccessful. -->
<string name="band_mode_failed">Unsuccessful</string>
<!-- Band mode screen. Statusm essage when successful. -->
<string name="band_mode_succeeded">Successful</string>
<!-- Instructions after the user changes the mass storage settings -->
<string name="sdcard_changes_instructions">Changes take effect when USB cable is reconnected.</string>
<!-- Enable USB mass storage mode checkbox title -->
<string name="sdcard_settings_screen_mass_storage_text">Enable USB mass storage</string>
<!-- The label for total bytes on SD card -->
<string name="sdcard_settings_total_bytes_label">Total bytes:</string>
<!-- Message when there is no SD card present [CHAR LIMIT=30] -->
<string name="sdcard_settings_not_present_status" product="nosdcard">USB storage not mounted.</string>
<!-- Message when there is no SD card present -->
<string name="sdcard_settings_not_present_status" product="default">No SD card.</string>
<!-- Th label for the available (free) sapce on the SD card -->
<string name="sdcard_settings_available_bytes_label">Available bytes:</string>
<!-- Message when the SD card is being used by the computer as mass storage [CHAR LIMIT=30] -->
<string name="sdcard_settings_mass_storage_status" product="nosdcard">USB storage is being used as a mass storage device.</string>
<!-- Message when the SD card is being used by the computer as mass storage -->
<string name="sdcard_settings_mass_storage_status" product="default">SD card is being used as a mass storage device.</string>
<!-- Message when it is safe to remove the SD card [CHAR LIMIT=30] -->
<string name="sdcard_settings_unmounted_status" product="nosdcard">It\u2019s now safe to remove the USB storage.</string>
<!-- Message when it is safe to remove the SD card -->
<string name="sdcard_settings_unmounted_status" product="default">It\u2019s now safe to remove the SD card.</string>
<!-- Error message when the SD card was removed without properly unmounting [CHAR LIMIT=30] -->
<string name="sdcard_settings_bad_removal_status" product="nosdcard">USB storage was removed while still in use!</string>
<!-- Error message when the SD card was removed without properly unmounting -->
<string name="sdcard_settings_bad_removal_status" product="default">SD card was removed while still in use!</string>
<!-- Label for used bytes on the SD card -->
<string name="sdcard_settings_used_bytes_label">Used bytes:</string>
<!-- Message when it is scanning the SD card for new files [CHAR LIMIT=30] -->
<string name="sdcard_settings_scanning_status" product="nosdcard">Scanning USB storage for media\u2026</string>
<!-- Message when it is scanning the SD card for new files -->
<string name="sdcard_settings_scanning_status" product="default">Scanning SD card for media\u2026</string>
<!-- Message when the SD card is mounted as read only [CHAR LIMIT=30] -->
<string name="sdcard_settings_read_only_status" product="nosdcard">USB storage mounted read-only.</string>
<!-- Message when the SD card is mounted as read only -->
<string name="sdcard_settings_read_only_status" product="default">SD card mounted read-only.</string>
<!-- Used in setup wizard Wi-Fi screen. The button label for going to the next screen without submitting. [CHAR LIMIT=20] -->
<string name="skip_label">Skip</string>
<!-- Used in setup wizard Wi-Fi screen. The button label for going to the next screen and submitting. [CHAR LIMIT=20] -->
<string name="next_label">Next</string>
<!-- LocalePicker -->
<!-- Title for the locale picker activity -->
<string name="language_picker_title">Language</string>
<!-- The title of the dialog to pick an activity. This is shown when there are multiple activities that can do a particular action. For example, suppose you click on the "Share" menu item in the Browser. Since you can share the webpage URL via many communication methods, this dialog would come up with choices like "Email", "IM", etc. This is a generic message, and the previous example is a single possible scenario (so please don't assume it's for the browser or anything :) ). -->
<string name="activity_picker_label">Choose activity</string>
<!-- Do not translate. -->
<string name="debug_intent_sender_label">Debug intent sender</string>
<!-- The title of the activity to see random device info. -->
<string name="device_info_label">Device info</string>
<!-- The title of the activity to adjust display settings -->
<string name="display_label">Screen</string>
<!-- The title of the activity to see phone info -->
<string name="phone_info_label" product="tablet">Tablet info</string>
<!-- The title of the activity to see phone info -->
<string name="phone_info_label" product="default">Phone info</string>
<!-- The title of the activity to adjust SD card settings [CHAR LIMIT=25] -->
<string name="sd_card_settings_label" product="nosdcard">USB storage</string>
<!-- The title of the activity to adjust SD card settings-->
<string name="sd_card_settings_label" product="default">SD card</string>
<!-- The title of the activity to adjust proxy settings -->
<string name="proxy_settings_label">Proxy settings</string>
<!-- ======================================================================================= -->
<!-- NEW STUFF -->
<!-- ======================================================================================= -->
<!-- Button label for generic cancel action [CHAR LIMIT=20] -->
<string name="cancel">Cancel</string>
<!-- Button label for generic OK action [CHAR LIMIT=20] -->
<string name="okay">OK</string>
<!-- Button label for generic forget action [CHAR LIMIT=20] -->
<string name="forget">Forget</string>
<!-- Button label for generic save action [CHAR LIMIT=20] -->
<string name="save">Save</string>
<!-- Button label for generic done action [CHAR LIMIT=20] -->
<string name="done">Done</string>
<!-- Title of the Settings activity shown within the application itself. -->
<string name="settings_label">Settings</string>
<!-- Title of the Settings activity shown in the Launcher. [CHAR LIMIT=20] -->
<string name="settings_label_launcher">Settings</string>
<!-- Label for option to select a settings panel as a shortcut -->
<string name="settings_shortcut">Settings shortcut</string>
<!-- Wireless controls settings screen, setting check box label -->
<string name="airplane_mode">Airplane mode</string>
<!-- Main Settings screen settings title for things like airplane mode, tethering, NFC, VPN. This will take you to another screen with those settings. [CHAR LIMIT=30] -->
<string name="radio_controls_title">More</string>
<!-- Wireless Settings screen title for things like Wi-Fi, bluetooth, airplane mode. -->
<string name="wireless_networks_settings_title">Wireless &amp; networks</string>
<!-- Main Settings screen settings summary text for the "Wireless controls" setting -->
<string name="radio_controls_summary">Manage Wi\u2011Fi, Bluetooth, airplane mode, cellular networks, &amp; VPNs</string>
<!-- check box cellular data title [CHAR LIMIT=30] -->
<string name="cellular_data_title">Cellular data</string>
<!-- check box Calls title [CHAR LIMIT=30] -->
<string name="calls_title">Calls</string>
<!-- check box SMS Messges title [CHAR LIMIT=30] -->
<string name="sms_messages_title">SMS messages</string>
<!-- check box cellular data summary [CHAR LIMIT=41] -->
<string name="cellular_data_summary">Allow data usage over cellular network</string>
<!-- check box to allow data usage when roaming [CHAR LIMIT=41] -->
<string name="allow_data_usage_title">Allow data usage when roaming</string>
<!-- mobile network settings screen, setting check box title -->
<string name="roaming">Data roaming</string>
<!-- mobile network settings screen, setting option summary text when check box is selected -->
<string name="roaming_enable">Connect to data services when roaming</string>
<!-- mobile network settings screen, setting option summary text when check box is clear -->
<string name="roaming_disable">Connect to data services when roaming</string>
<!-- mobile network settings screen, dialog message when you are roaming and clear the "Data roaming" check box -->
<string name="roaming_reenable_message">You have lost data connectivity because you left your home network with data roaming turned off.</string>
<!-- mobile network settings screen, button on dialog box that appears when you are roaming and clear the "Data roaming" check box -->
<string name="roaming_turn_it_on_button">Turn it on</string>
<!-- mobile network settings screen, message in dialog box that appears when you select the "Data roaming" check box -->
<string name="roaming_warning">When you allow data roaming, you may incur significant roaming charges!</string>
<!-- mobile network settings screen, message in dialog box that appears when you select the "Data roaming" check box. This is for multiuser tablets [CHAR LIMIT=none] -->
<string name="roaming_warning_multiuser" product="tablet">When you allow data roaming, you may incur significant roaming charges!\n\nThis setting affects all users on this tablet.</string>
<!-- mobile network settings screen, message in dialog box that appears when you select the "Data roaming" check box. This is for multiuser phones [CHAR LIMIT=none] -->
<string name="roaming_warning_multiuser" product="default">When you allow data roaming, you may incur significant roaming charges!\n\nThis setting affects all users on this phone.</string>
<!-- mobile network settings screen, title of dialog box that appears when you select the "Data roaming" check box -->
<string name="roaming_reenable_title">Allow data roaming?</string>
<!-- mobile network settings screen, setting option name -->
<string name="networks">Operator selection</string>
<!-- mobile network settings screen, setting option summary text -->
<string name="sum_carrier_select">Choose a network operator</string>
<!-- Date and time settings --><skip />
<!-- Main Settings screen setting option name to go into the date and time settings-->
<string name="date_and_time_settings_title">Date &amp; time</string>
<!-- Title for Date & Time settings screen in SetupWizard [CHAR LIMIT=40] -->
<string name="date_and_time_settings_title_setup_wizard">Set date and time</string>
<!-- Main Settings screen setting option summary text for the item to go into the date and time settings. -->
<string name="date_and_time_settings_summary">Set date, time, time zone, &amp; formats</string>
<!-- Date & time setting screen setting check box title if the date and time should be determined automatically [CHAR LIMIT=30] -->
<string name="date_time_auto">Automatic date &amp; time</string>
<!-- Date & time setting screen setting option summary text when Automatic check box is selected
(that is, when date and time should be determined automatically) [CHAR LIMIT=100] -->
<string name="date_time_auto_summaryOn">Use network-provided time</string>
<!-- Date & time setting screen setting option summary text when Automatic check box is clear
[CHAR LIMIT=100] -->
<string name="date_time_auto_summaryOff">Use network-provided time</string>
<!-- Date & time setting screen setting check box title if the time zone should be determined automatically [CHAR LIMIT=30] -->
<string name="zone_auto">Automatic time zone</string>
<!-- Date & time setting screen setting option summary text when Automatic time zone check box is selected (that is, when date and time should be determined automatically)
[CHAR LIMIT=100] -->
<string name="zone_auto_summaryOn">Use network-provided time zone</string>
<!-- Date & time setting screen setting option summary text when Automatic time zone check box is clear
[CHAR LIMIT=100] -->
<string name="zone_auto_summaryOff">Use network-provided time zone</string>
<!-- Date & time setting screen setting check box title [CHAR LIMIT=30] -->
<string name="date_time_24hour_title">24\u2011hour format</string>
<!-- Date & time setting screen setting check box title -->
<string name="date_time_24hour">Use 24-hour format</string>
<!-- Date & time setting screen setting option title [CHAR LIMIT=30] -->
<string name="date_time_set_time_title">Time</string>
<!-- Date & time setting screen setting option title -->
<string name="date_time_set_time">Set time</string>
<!-- Date & time setting screen setting option title [CHAR LIMIT=30] -->
<string name="date_time_set_timezone_title">Time zone</string>
<!-- Date & time setting screen setting option title -->
<string name="date_time_set_timezone">Select time zone</string>
<!-- Date & time setting screen setting option title [CHAR LIMIT=30] -->
<string name="date_time_set_date_title">Date</string>
<!-- Date & time setting screen setting option title -->
<string name="date_time_set_date">Set date</string>
<!-- Menu item on Select time zone screen -->
<string name="zone_list_menu_sort_alphabetically">Sort alphabetically</string>
<!-- Menu item on Select time zone screen -->
<string name="zone_list_menu_sort_by_timezone">Sort by time zone</string>
<!-- Title string shown above DatePicker, letting a user select system date
[CHAR LIMIT=20] -->
<string name="date_picker_title">Date</string>
<!-- Title string shown above TimePicker, letting a user select system time
[CHAR LIMIT=20] -->
<string name="time_picker_title">Time</string>
<!-- Security Settings --><skip />
<!-- Security settings screen, setting option name to change screen timeout -->
<string name="lock_after_timeout">Automatically lock</string>
<!-- Security settings screen, setting option summary to change screen timeout -->
<string name="lock_after_timeout_summary"><xliff:g id="timeout_string">%1$s</xliff:g> after sleep</string>
<!-- Security settings screen, setting option summary to change screen timeout, with additional explanation-->
<string name="lock_immediately_summary_with_exception">Immediately after sleep, except when kept unlocked by <xliff:g id="trust_agent_name">%1$s</xliff:g></string>
<!-- Security settings screen, setting option summary to change screen timeout, with additional explanation-->
<string name="lock_after_timeout_summary_with_exception"><xliff:g id="timeout_string">%1$s</xliff:g> after sleep, except when kept unlocked by <xliff:g id="trust_agent_name">%2$s</xliff:g></string>
<!-- Text shown next to checkbox for showing owner info on LockScreen [CHAR LIMIT=50]-->
<string name="show_owner_info_on_lockscreen_label">Show owner info on lock screen</string>
<!-- Text shown for title of owner info setting [CHAR LIMIT=20]-->
<string name="owner_info_settings_title">Lock screen message</string>
<!-- Text shown for title of settings checkbox to enable widgets [CHAR LIMIT=20]-->
<string name="security_enable_widgets_title">Enable widgets</string>
<!-- Summary for settings checkbox to disable widgets when the setting has been disabled by an installed device admin [CHAR LIMIT=50] -->
<string name="security_enable_widgets_disabled_summary">Disabled by administrator</string>
<!-- Text shown for summary of owner info setting (if none set) [CHAR LIMIT=40]-->
<string name="owner_info_settings_summary">None</string>
<!-- Description of how many characters are used in owner info [CHAR LIMIT=40]-->
<string name="owner_info_settings_status"><xliff:g id="count" example="90">%1$d</xliff:g> / <xliff:g id="count" example="100">%2$d</xliff:g></string>
<!-- Hint text shown in owner info edit text [CHAR LIMIT=50] -->
<string name="owner_info_settings_edit_text_hint">E.g., Joe\u2019s Android.</string>
<!-- Text shown for title of user info setting [CHAR LIMIT=20]-->
<string name="user_info_settings_title">User info</string>
<!-- Text shown next to checkbox for showing profile info on LockScreen [CHAR LIMIT=50]-->
<string name="show_profile_info_on_lockscreen_label">Show profile info on lock screen</string>
<!-- Text shown for title of profile info setting [CHAR LIMIT=20]-->
<string name="profile_info_settings_title">Profile info</string>
<!-- Main Settings screen setting option title for the item to take you to the Accounts screen [CHAR LIMIT=22] -->
<string name="Accounts_settings_title">Accounts</string>
<!-- Main Settings screen setting option title for the item to take you to the location screen -->
<string name="location_settings_title">Location</string>
<!-- Main Settings screen setting option title for the item to take you to the accounts screen [CHAR LIMIT=22] -->
<string name="account_settings_title">Accounts</string>
<!-- Main Settings screen setting option title for the item to take you to the security screen -->
<string name="security_settings_title">Security</string>
<!-- Main Settings screen setting option summary text for the item tot ake you to the security and location screen -->
<string name="security_settings_summary">Set My Location, screen unlock, SIM card lock, credential storage lock</string>
<!-- Main Settings screen setting option summary text for the item to take you to the CDMA security and location screen -->
<string name="cdma_security_settings_summary">Set My Location, screen unlock, credential storage lock</string>
<!-- In the security screen, the header title for settings related to Passwords-->
<string name="security_passwords_title">Passwords</string>
<!-- Fingerprint enrollment and settings --><skip />
<!-- Title shown for menu item that launches fingerprint settings or enrollment [CHAR LIMIT=22] -->
<string name="security_settings_fingerprint_preference_title">Fingerprint</string>
<!-- Fingerprint managment category title - configuration options for managing enrolled fingerprints [CHAR LIMIT=22] -->
<string name="fingerprint_manage_category_title">Manage fingerprints</string>
<!-- Fingerprint category title - configuration options for managing fingerprint enrollment [CHAR LIMIT=22] -->
<string name="fingerprint_usage_category_title">Use fingerprint for</string>
<!-- Preference to add another fingerprint -->
<string name="fingerprint_add_title">Add fingerprint</string>
<!-- switch for allowing fingerprint to be used for keyguard -->
<string name="fingerprint_enable_keyguard_toggle_title">screen lock</string>
<!-- message shown for menu item that launches fingerprint settings or enrollment -->
<plurals name="security_settings_fingerprint_preference_summary">
<item quantity="one"><xliff:g id="count">%1$d</xliff:g> fingerprint set up</item>
<item quantity="other"><xliff:g id="count">%1$d</xliff:g> fingerprints set up</item>
</plurals>
<!-- Introduction title shown in fingerprint enrollment dialog [CHAR LIMIT=29] -->
<string name="security_settings_fingerprint_enroll_onboard_title">Fingerprint setup</string>
<!-- Introduction message shown in fingerprint enrollment dialog when the user needs to choose an
alternate screen unlock (pin, pattern or password) as a backup to fingerprint. -->
<string name="security_settings_fingerprint_enroll_onboard_message">To use your fingerprint to unlock your screen or confirm purchases, you\u2019ll need to:</string>
<!-- Introduction message shown in fingerprint enrollment dialog, first item to describe what
the user needs to do. -->
<string name="security_settings_fingerprint_enroll_onboard_message_1">Set up your backup screen lock method</string>
<!-- Introduction message shown in fingerprint enrollment dialog, second item to describe what
the user needs to do. -->
<string name="security_settings_fingerprint_enroll_onboard_message_2">Add your fingerprint</string>
<!-- Introduction title shown in fingerprint enrollment to introduce the fingerprint feature[CHAR LIMIT=29] -->
<string name="security_settings_fingerprint_enroll_introduction_title">Unlock with fingerprint</string>
<!-- Introduction detail message shown in fingerprint enrollment dialog [CHAR LIMIT=NONE]-->
<string name="security_settings_fingerprint_enroll_introduction_message">Just touch the fingerprint sensor to unlock your phone, authorize purchases, or sign in to apps. Be careful whose fingerprints you add - any fingerprints added will be able to do these things.</string>
<!-- Introduction detail message shown in fingerprint enrollment dialog to warn the user [CHAR LIMIT=NONE]-->
<string name="security_settings_fingerprint_enroll_introduction_message_warning">Note: Your fingerprint may be less secure than a strong pattern or PIN.</string>
<!-- Link text shown bellow the warning to learn morn about fingerprint risk [CHAR LIMIT=22]-->
<string name="security_settings_fingerprint_enroll_introduction_risk_link_text">Learn more</string>
<!-- Button text to cancel enrollment from the introduction [CHAR LIMIT=22] -->
<string name="security_settings_fingerprint_enroll_introduction_cancel">Cancel</string>
<!-- Button text to continue to the next screen from the introduction [CHAR LIMIT=22] -->
<string name="security_settings_fingerprint_enroll_introduction_continue">Continue</string>
<!-- Introduction title shown in fingerprint enrollment dialog to locate the sensor [CHAR LIMIT=29] -->
<string name="security_settings_fingerprint_enroll_find_sensor_title">Find the sensor</string>
<!-- Message shown in fingerprint enrollment dialog to locate the sensor -->
<string name="security_settings_fingerprint_enroll_find_sensor_message">
Locate the fingerprint sensor on the back of your phone.</string>
<!-- Content description of graphic that shows where the fingerprint of the device is [CHAR LIMIT=NONE] -->
<string name="security_settings_fingerprint_enroll_find_sensor_content_description">Illustration with device and fingerprint sensor location</string>
<!-- Label text shown in fingerprint dialog for renaming a fingerprint template [CHAR LIMIT=22] -->
<string name="security_settings_fingerprint_enroll_dialog_name_label">Name</string>
<!-- Button text shown in fingerprint dialog that allows the user to rename a fingerprint template [CHAR LIMIT=22] -->
<string name="security_settings_fingerprint_enroll_dialog_ok">OK</string>
<!-- Button text shown in fingerprint dialog that allows the user to delete the fingerprint template [CHAR LIMIT=22] -->
<string name="security_settings_fingerprint_enroll_dialog_delete">Delete</string>
<!-- Title shown in fingerprint enrollment dialog to begin enrollment [CHAR LIMIT=29]-->
<string name="security_settings_fingerprint_enroll_start_title">Let\u2019s start!</string>
<!-- Message shown in fingerprint enrollment dialog to begin enrollment [CHAR LIMIT=NONE] -->
<string name="security_settings_fingerprint_enroll_start_message">Put your finger on the sensor and lift after you feel a vibration</string>
<!-- Title shown in fingerprint enrollment dialog to repeat touching the fingerprint sensor [CHAR LIMIT=29] -->
<string name="security_settings_fingerprint_enroll_repeat_title">Great! Now repeat</string>
<!-- Message shown in fingerprint enrollment dialog to repeat touching the fingerprint sensor [CHAR LIMIT=NONE] -->
<string name="security_settings_fingerprint_enroll_repeat_message">Move your finger slightly to add all the different parts of your fingerprint</string>
<!-- Title shown in fingerprint enrollment dialog once enrollment is completed [CHAR LIMIT=29] -->
<string name="security_settings_fingerprint_enroll_finish_title">Fingerprint added!</string>
<!-- Message shown in fingerprint enrollment dialog once enrollment is completed -->
<string name="security_settings_fingerprint_enroll_finish_message">Whenever you see this icon, you can use your fingerprint for identification or to authorize a purchase.</string>
<!-- Message shown when fingerprint enrollment is completed during setup wizard [CHAR LIMIT=NONE] -->
<string name="setup_fingerprint_enroll_finish_message">Just touch the fingerprint sensor to wake and unlock your device.</string>
<!-- Message shown when fingerprint enrollment is completed, telling user about the fingerprint icon that will be shown whenever they can use their fingerprint [CHAR LIMIT=NONE] -->
<string name="setup_fingerprint_enroll_finish_message_secondary">When you see this icon, you can use your fingerprint.</string>
<!-- Button text to setup screen lock in onboard dialog [CHAR LIMIT=34] -->
<string name="security_settings_fingerprint_enroll_setup_screen_lock">Set up screen lock</string>
<!-- Button text to exit fingerprint wizard after everything is done [CHAR LIMIT=15] -->
<string name="security_settings_fingerprint_enroll_done">Done</string>
<!-- Dialog title for dialog which shows when user touches the icon on the screen, instead of the sensor at the back [CHAR LIMIT=45] -->
<string name="security_settings_fingerprint_enroll_touch_dialog_title">Whoops, that\u2019s not the sensor</string>
<!-- Dialog message for dialog which shows when user touches the icon on the screen, instead of the sensor at the back [CHAR LIMIT=45] -->
<string name="security_settings_fingerprint_enroll_touch_dialog_message">Use the fingerprint sensor on your device.</string>
<!-- Button text shown at the end of enrollment that allows the user to add another fingerprint -->
<string name="fingerprint_enroll_button_add">Add another</string>
<!-- Button text shown at the end of enrollment that allows the user to move to the next step -->
<string name="fingerprint_enroll_button_next">Next</string>
<!-- Text shown in fingerprint settings explaining what the fingerprint can be used for. [CHAR LIMIT=NONE] -->
<string name="security_settings_fingerprint_enroll_disclaimer">In addition to unlocking your phone, you can also use your fingerprint to authorize purchases and app access. <annotation id="url">Learn more</annotation></string>
<!-- Text shown in fingerprint settings explaining what the fingerprint can be used for in the case unlocking is disabled [CHAR LIMIT=NONE] -->
<string name="security_settings_fingerprint_enroll_disclaimer_lockscreen_disabled">Screen lock option disabled. You can still use your fingerprint to authorize purchases and app access. <annotation id="url">Learn more</annotation></string>
<!-- Text shown in fingerprint enroll when we didn't observe progress for a few seconds. [CHAR LIMIT=100] -->
<string name="security_settings_fingerprint_enroll_lift_touch_again">Lift finger, then touch sensor again</string>
<!-- Text shown when "Add fingerprint" button is disabled -->
<string name="fingerprint_add_max">You can add up to <xliff:g id="count" example="5">%d</xliff:g> fingerprints</string>
<!-- Title shown in a dialog which asks the user to confirm when the last fingerprint gets deleted by him. [CHAR LIMIT=35]-->
<string name="fingerprint_last_delete_title">Remove all fingerprints?</string>
<!-- Message shown in a dialog which asks the user to confirm when the last fingerprint gets deleted by him. [CHAR LIMIT=NONE]-->
<string name="fingerprint_last_delete_message">You won\'t be able to use your fingerprints to unlock your phone, authorize purchases, or sign in to apps with them.</string>
<!-- Button to confirm the last removing the last fingerprint. [CHAR LIMIT=20]-->
<string name="fingerprint_last_delete_confirm">Yes, remove</string>
<!-- Content description for the fingerprint icon when the user is prompted to enter his credentials. Not shown on the screen. [CHAR LIMIT=NONE] -->
<string name="confirm_fingerprint_icon_content_description">Use your fingerprint to continue.</string>
<!-- Title of the preferences category for preference items to control encryption -->
<string name="crypt_keeper_settings_title">Encryption</string>
<!-- Title of the preferences item to control encryption -->
<string name="crypt_keeper_encrypt_title" product="tablet">Encrypt tablet</string>
<!-- Title of the preferences item to control encryption -->
<string name="crypt_keeper_encrypt_title" product="default">Encrypt phone</string>
<!-- Summary of the preferences item to control encryption, when encryption is active -->
<string name="crypt_keeper_encrypted_summary">Encrypted</string>
<!-- Informational text in the first confirmation screen before starting device encryption -->
<string name="crypt_keeper_desc" product="tablet">
You can encrypt your accounts, settings, downloaded apps and their data,
media, and other files. After you encrypt your tablet, assuming you\u2019ve set up a screen lock
(that is, a pattern or numeric PIN or password), you\u2019ll need to unlock the screen to decrypt
the tablet every time you power it on. The only other way to decrypt is to perform a factory
data reset, erasing all your data.\n\nEncryption takes an hour or more. You must start with
a charged battery and keep your tablet plugged in throughout the process. If you interrupt it,
you\u2019ll lose some or all of your data</string>
<!-- Informational text in the first confirmation screen before starting device encryption -->
<string name="crypt_keeper_desc" product="default">
You can encrypt your accounts, settings, downloaded apps and their data,
media, and other files. After you encrypt your phone, assuming you\u2019ve set up a screen lock
(that is, a pattern or numeric PIN or password), you\u2019ll need to unlock the screen to decrypt
the phone every time you power it on. The only other way to decrypt is to perform a factory
data reset, erasing all your data.\n\nEncryption takes an hour or more. You must start with
a charged battery and keep your phone plugged in throughout the process. If you interrupt it,
you\u2019ll lose some or all of your data.</string>
<!-- Button text to start encryption process -->
<string name="crypt_keeper_button_text" product="tablet">Encrypt tablet</string>
<!-- Button text to start encryption process -->
<string name="crypt_keeper_button_text" product="default">Encrypt phone</string>
<!-- Warning string that will be displayed when encryption cannot be started -->
<string name="crypt_keeper_low_charge_text">Charge your battery and try again.</string>
<!-- Warning string that will be displayed when encryption cannot be started -->
<string name="crypt_keeper_unplugged_text">Plug in your charger and try again.</string>
<!-- Dialog title, shown when encryption cannot proceed because a PIN/Password is needed -->
<string name="crypt_keeper_dialog_need_password_title">No lock screen PIN or password</string>
<!-- Dialog message, shown when encryption cannot proceed because a PIN/Password is needed -->
<string name="crypt_keeper_dialog_need_password_message">You need to set a lock screen PIN or
password before you can start encryption.</string>
<!-- Title of the final confirmation screen before starting device encryption -->
<string name="crypt_keeper_confirm_title">Encrypt?</string>
<!-- Warning text in the final confirmation screen before starting device encryption -->
<string name="crypt_keeper_final_desc" product="tablet">
The encryption operation is irreversible and if you interrupt it, you\u2019ll lose data.
Encryption takes an hour or more, during which the tablet will restart several times.
</string>
<!-- Warning text in the final confirmation screen before starting device encryption -->
<string name="crypt_keeper_final_desc" product="default">
The encryption operation is irreversible and if you interrupt it, you\u2019ll lose data.
Encryption takes an hour or more, during which the phone will restart several times.
</string>
<!-- Title of the progress screen while encrypting the device -->
<string name="crypt_keeper_setup_title">Encrypting</string>
<!-- Informational text on the progress screen while encrypting the device -->
<string name="crypt_keeper_setup_description" product="tablet">Wait while your tablet
is being encrypted. <xliff:g id="percent" example="50">^1</xliff:g>% complete.</string>
<!-- Informational text on the progress screen while encrypting the device -->
<string name="crypt_keeper_setup_description" product="default">Wait while your phone
is being encrypted. <xliff:g id="percent" example="50">^1</xliff:g>% complete.</string>
<string name="crypt_keeper_setup_time_remaining" product="tablet">Wait while your tablet
is being encrypted. Time remaining: <xliff:g id="duration" example="1:23">^1</xliff:g></string>
<string name="crypt_keeper_setup_time_remaining" product="default">Wait while your phone
is being encrypted. Time remaining: <xliff:g id="duration" example="1:23">^1</xliff:g></string>
<string name="crypt_keeper_force_power_cycle" product="tablet">To unlock your tablet, turn it off and then on.</string>
<string name="crypt_keeper_force_power_cycle" product="default">To unlock your phone, turn it off and then on.</string>
<!-- Warn user their device will be wiped if they make x more failed attempts -->
<string name="crypt_keeper_warn_wipe">Warning: Your device will be wiped after
<xliff:g id="count" example="7">^1</xliff:g> more failed attempts to be unlocked!
</string>
<!-- Informational text on the password entry screen prompting the user for their password -->
<string name="crypt_keeper_enter_password">Type your password</string>
<!-- Title of the encryption screen when encrypting the device failed -->
<string name="crypt_keeper_failed_title">Encryption unsuccessful</string>
<!-- Informational text when encryption fails -->
<string name="crypt_keeper_failed_summary" product="tablet">
Encryption was interrupted and can\u2019t complete. As a result, the data on
your tablet is no longer accessible.
\n\n
To resume using your tablet, you need to perform a factory reset.
When you set up your tablet after the reset, you\u2019ll have an opportunity
to restore any data that was backed up to your Google Account.
</string>
<!-- Informational text when encryption fails -->
<string name="crypt_keeper_failed_summary" product="default">
Encryption was interrupted and can\u2019t complete. As a result, the data on
your phone is no longer accessible.
\n\nTo resume using your phone, you need to perform a factory reset.
When you set up your phone after the reset, you\u2019ll have an opportunity
to restore any data that was backed up to your Google Account.
</string>
<!-- Title of the encryption screen when decrypting the device failed -->
<string name="crypt_keeper_data_corrupt_title">Decryption unsuccessful</string>
<!-- Informational text when encryption fails -->
<string name="crypt_keeper_data_corrupt_summary" product="tablet">
The password you entered is correct, but unfortunately your data is
corrupt.
\n\nTo resume using your tablet, you need to perform a factory reset.
When you set up your tablet after the reset, you\u2019ll have an opportunity
to restore any data that was backed up to your Google Account.
</string>
<!-- Informational text when encryption fails -->
<string name="crypt_keeper_data_corrupt_summary" product="default">
The password you entered is correct, but unfortunately your data is
corrupt.
\n\nTo resume using your phone, you need to perform a factory reset.
When you set up your phone after the reset, you\u2019ll have an opportunity
to restore any data that was backed up to your Google Account.
</string>
<!-- Image button description to switch input method -->
<string name="crypt_keeper_switch_input_method">Switch input method</string>
<!-- Unlock Picker Settings --><skip />
<!-- Security Picker --><skip />
<!-- Title for security picker to choose the unlock method: None/Pattern/PIN/Password [CHAR LIMIT=22] -->
<string name="lock_settings_picker_title">Choose screen lock</string>
<!-- Message shown in screen lock picker while setting up the backup/fallback screen lock method for fingerprint. Users can choose to use this method to unlock the screen instead of fingerprint, or when fingerprint is not accepted. [CHAR LIMIT=80] [BACKUP_MESSAGE_ID=2799884038398627882] -->
<string name="lock_settings_picker_fingerprint_message">Choose your backup screen lock method</string>
<!-- Main Security lock settings --><skip />
<!-- Title for PreferenceScreen to launch picker for security method when there is none [CHAR LIMIT=22] -->
<string name="unlock_set_unlock_launch_picker_title">Screen lock</string>
<!-- Title for PreferenceScreen to change security method: None/Pattern/PIN/Password [CHAR LIMIT=22] -->
<string name="unlock_set_unlock_launch_picker_change_title">Change lock screen</string>
<!-- Summary for PreferenceScreen to changeecurity method: None/Pattern/PIN/Password [CHAR LIMIT=45] -->
<string name="unlock_set_unlock_launch_picker_change_summary">Change or disable pattern, PIN, or password security</string>
<!-- Summary for PreferenceScreen to changeecurity method: None/Pattern/PIN/Password [CHAR LIMIT=45] -->
<string name="unlock_set_unlock_launch_picker_enable_summary">Choose a method to lock the screen</string>
<!-- Title for preference that disables unlock security [CHAR LIMIT=22] -->
<string name="unlock_set_unlock_off_title">None</string>
<!-- Summary for preference that disables unlock security [CHAR LIMIT=45] -->
<string name="unlock_set_unlock_off_summary"></string>
<!-- Title for preference that disables unlock security [CHAR LIMIT=22] -->
<string name="unlock_set_unlock_none_title">Swipe</string>
<!-- Summary for preference that disables unlock security [CHAR LIMIT=45]-->
<string name="unlock_set_unlock_none_summary">No security</string>
<!-- Title for preference that guides the user through creating an unlock pattern [CHAR LIMIT=22]-->
<string name="unlock_set_unlock_pattern_title">Pattern</string>
<!-- Summary for preference that guides the user through creating an unlock pattern [CHAR LIMIT=45] -->
<string name="unlock_set_unlock_pattern_summary">Medium security</string>
<!-- Title for preference that guides the user through creating an unlock PIN (Personal Identification Number) [CHAR LIMIT=22] -->
<string name="unlock_set_unlock_pin_title">PIN</string>
<!-- Summary for preference that guides the user through creating an unlock PIN (Personal Identification Number) [CHAR LIMIT=45] -->
<string name="unlock_set_unlock_pin_summary">Medium to high security</string>
<!-- Title for preference that guides the user through creating an unlock password [CHAR LIMIT=22] -->
<string name="unlock_set_unlock_password_title">Password</string>
<!-- Title for preference that guides the user through creating an unlock password [CHAR LIMIT=45] -->
<string name="unlock_set_unlock_password_summary">High security</string>
<!-- Summary specifying that this is the current screen lock setting [CHAR LIMIT=45] -->
<string name="current_screen_lock">Current screen lock</string>
<!-- Summary for preference that has been disabled by because of the DevicePolicyAdmin, or because device encryption is enabled, or because there are credentials in the credential storage [CHAR LIMIT=50] -->
<string name="unlock_set_unlock_disabled_summary">Disabled by administrator, encryption policy, or credential storage</string>
<!-- Summary for "Configure lockscreen" when lock screen is off [CHAR LIMIT=45] -->
<string name="unlock_set_unlock_mode_off">None</string>
<!-- Summary for "Configure lockscreen" when security is disabled [CHAR LIMIT=45] -->
<string name="unlock_set_unlock_mode_none">Swipe</string>
<!-- Summary for "Configure lockscreen" when security pattern is enabled [CHAR LIMIT=45] -->
<string name="unlock_set_unlock_mode_pattern">Pattern</string>
<!-- Summary for "Configure lockscreen" when security PIN is enabled [CHAR LIMIT=45] -->
<string name="unlock_set_unlock_mode_pin">PIN</string>
<!-- Summary for "Configure lockscreen" when security password is enabled [CHAR LIMIT=45] -->
<string name="unlock_set_unlock_mode_password">Password</string>
<!-- Footer text in when choosing screen lock type during setup wizard, telling the user that
they can add fingerprint after they complete setup wizard. The text "Settings > Security"
should match settings_label and security_settings_title [CHAR LIMIT=NONE] -->
<string name="unlock_setup_wizard_fingerprint_details">Once you\u2019ve set up a screen lock, you can also set up your fingerprint in Settings &gt; Security.</string>
<!-- Title for option to turn of password/pin/pattern unlock. [CHAR LIMIT=22] -->
<string name="unlock_disable_lock_title">Turn off screen lock</string>
<!-- Title of the dialog shown when the user removes the device lock [CHAR LIMIT=NONE] -->
<string name="unlock_disable_frp_warning_title">Remove device protection?</string>
<!-- Content of the dialog shown when the user removes the device lock pattern [CHAR LIMIT=NONE] -->
<string name="unlock_disable_frp_warning_content_pattern">"Device protection features will not work without your pattern."</string>
<!-- Content of the dialog shown when the user removes the device lock pattern and the user has fingerprints enrolled [CHAR LIMIT=NONE] -->
<string name="unlock_disable_frp_warning_content_pattern_fingerprint">"Device protection features will not work without your pattern.<xliff:g id="empty_line">\n\n</xliff:g>Your saved fingerprints will also be removed from this device and you won't be able to unlock your phone, authorize purchases, or sign in to apps with them."</string>
<!-- Content of the dialog shown when the user removes the device lock PIN [CHAR LIMIT=NONE] -->
<string name="unlock_disable_frp_warning_content_pin">"Device protection features will not work without your PIN."</string>
<!-- Content of the dialog shown when the user removes the device lock PIN and the user has fingerprints enrolled [CHAR LIMIT=NONE] -->
<string name="unlock_disable_frp_warning_content_pin_fingerprint">"Device protection features will not work without your PIN.<xliff:g id="empty_line">\n\n</xliff:g>Your saved fingerprints will also be removed from this device and you won't be able to unlock your phone, authorize purchases, or sign in to apps with them."</string>
<!-- Content of the dialog shown when the user removes the device lock password [CHAR LIMIT=NONE] -->
<string name="unlock_disable_frp_warning_content_password">"Device protection features will not work without your password."</string>
<!-- Content of the dialog shown when the user removes the device lock password and the user has fingerprints enrolled [CHAR LIMIT=NONE] -->
<string name="unlock_disable_frp_warning_content_password_fingerprint">"Device protection features will not work without your password.<xliff:g id="empty_line">\n\n</xliff:g>Your saved fingerprints will also be removed from this device and you won't be able to unlock your phone, authorize purchases, or sign in to apps with them."</string>
<!-- Content of the dialog shown when the user removes the device lock of unknown type [CHAR LIMIT=NONE] -->
<string name="unlock_disable_frp_warning_content_unknown">"Device protection features will not work without your screen lock."</string>
<!-- Content of the dialog shown when the user removes the device lock of unknown type and the user has fingerprints enrolled [CHAR LIMIT=NONE] -->
<string name="unlock_disable_frp_warning_content_unknown_fingerprint">"Device protection features will not work without your screen lock.<xliff:g id="empty_line">\n\n</xliff:g>Your saved fingerprints will also be removed from this device and you won't be able to unlock your phone, authorize purchases, or sign in to apps with them."</string>
<!-- Affirmative action of the dialog shown when the user removes the device lock [CHAR LIMIT=25] -->
<string name="unlock_disable_frp_warning_ok">Yes, remove</string>
<!-- Title shown on security settings to allow the user to change their lockscreen pattern [CHAR LIMIT=22] -->
<string name="unlock_change_lock_pattern_title">Change unlock pattern</string>
<!-- Title shown on security settings to allow the user to change their lockscreen PIN [CHAR LIMIT=22] -->
<string name="unlock_change_lock_pin_title">Change unlock PIN</string>
<!-- Title shown on security settings to allow the user to change their lockscreen password [CHAR LIMIT=22]-->
<string name="unlock_change_lock_password_title">Change unlock password</string>
<!-- Hint shown in dialog screen when password is too short -->
<string name="lockpassword_password_too_short">Password must be at least %d characters</string>
<!-- Hint shown in dialog screen when PIN is too short -->
<string name="lockpassword_pin_too_short">PIN must be at least %d digits</string>
<!-- Hint shown after minimum password criteria is met -->
<string name="lockpassword_press_continue">Touch Continue when done</string>
<!-- Hint shown after minimum password criteria is met -->
<string name="lockpassword_continue_label">Continue</string>
<!-- Error shown in popup when password is too long -->
<string name="lockpassword_password_too_long">Password must be fewer than <xliff:g id="number" example="17">%d</xliff:g> characters.</string>
<!-- Error shown in popup when PIN is too long -->
<string name="lockpassword_pin_too_long">PIN must be fewer than <xliff:g id="number" example="17">%d</xliff:g> digits.</string>
<!-- Error shown when in PIN mode and user enters a non-digit -->
<string name="lockpassword_pin_contains_non_digits">PIN must contain only digits 0-9.</string>
<!-- Error shown when in PIN mode and PIN has been used recently. Please keep this string short! -->
<string name="lockpassword_pin_recently_used">Device administrator doesn\u2019t allow using a recent PIN.</string>
<!-- Error shown when in PASSWORD mode and user enters an invalid character -->
<string name="lockpassword_illegal_character">Password contains an illegal character.</string>
<!-- Error shown when in PASSWORD mode and password is all digits -->
<string name="lockpassword_password_requires_alpha">Password must contain at least one letter.</string>
<!-- Error shown when in PASSWORD mode and password doesn't contain any digits -->
<string name="lockpassword_password_requires_digit">Password must contain at least one digit.</string>
<!-- Error shown when in PASSWORD mode and password doesn't contain any symbols -->
<string name="lockpassword_password_requires_symbol">Password must contain at least one symbol.</string>
<!-- Error shown when in PASSWORD mode and password doesn't contain the required number of letters -->
<plurals name="lockpassword_password_requires_letters">
<item quantity="one">Password must contain at least 1 letter.</item>
<item quantity="other">Password must contain at least %d letters.</item>
</plurals>
<!-- Error shown when in PASSWORD mode and password doesn't contain the required number of lowercase letters -->
<plurals name="lockpassword_password_requires_lowercase">
<item quantity="one">Password must contain at least 1 lowercase letter.</item>
<item quantity="other">Password must contain at least %d lowercase letters.</item>
</plurals>
<!-- Error shown when in PASSWORD mode and password doesn't contain the required number of uppercase letters -->
<plurals name="lockpassword_password_requires_uppercase">
<item quantity="one">Password must contain at least 1 uppercase letter.</item>
<item quantity="other">Password must contain at least %d uppercase letters.</item>
</plurals>
<!-- Error shown when in PASSWORD mode and password doesn't contain the required number of numerical digits -->
<plurals name="lockpassword_password_requires_numeric">
<item quantity="one">Password must contain at least 1 numerical digit.</item>
<item quantity="other">Password must contain at least %d numerical digits.</item>
</plurals>
<!-- Error shown when in PASSWORD mode and password doesn't contain the required number of special symbols -->
<plurals name="lockpassword_password_requires_symbols">
<item quantity="one">Password must contain at least 1 special symbol.</item>
<item quantity="other">Password must contain at least %d special symbols.</item>
</plurals>
<!-- Error shown when in PASSWORD mode and password doesn't contain the required number of non-letter characters -->
<plurals name="lockpassword_password_requires_nonletter">
<item quantity="one">Password must contain at least 1 non-letter character.</item>
<item quantity="other">Password must contain at least %d non-letter characters.</item>
</plurals>
<!-- Error shown when in PASSWORD mode and password has been used recently. Please keep this string short! -->
<string name="lockpassword_password_recently_used">Device administrator doesn\u2019t allow using a recent password.</string>
<!-- [CHAR_LIMIT=NONE] Error shown when the user tries to set an ascending or descending sequence of digits -->
<string name="lockpassword_pin_no_sequential_digits">An ascending, descending or repeated sequence of digits is forbidden</string>
<!-- Label for ChoosePassword/PIN OK button -->
<string name="lockpassword_ok_label">OK</string>
<!-- Label for ChoosePassword/PIN OK button -->
<string name="lockpassword_cancel_label">Cancel</string>
<!-- Label for LockPatternTutorial Cancel button -->
<string name="lockpattern_tutorial_cancel_label">Cancel</string>
<!-- Label for LockPatternTutorial Continue button -->
<string name="lockpattern_tutorial_continue_label">Next</string>
<!-- Toast shown when lock pattern or password successfully setup. [CHAR LIMIT=64] -->
<string name="lock_setup" msgid="5507462851158901718">Setup is complete.</string>
<!-- In the security screen, the header title for settings related to device admins -->
<string name="device_admin_title">Device administration</string>
<!-- Title of preference to manage device admins -->
<string name="manage_device_admin">Device administrators</string>
<!-- Summary of preference to manage device policies -->
<string name="manage_device_admin_summary">View or deactivate device administrators</string>
<!-- Title of preference to manage trust agents -->
<string name="manage_trust_agents">Trust agents</string>
<!-- Summary shown when trust agent settings is disabled because the user hasn't set up primary security -->
<string name="disabled_because_no_backup_security">To use, first set a screen lock</string>
<!-- Summary of preference to manage device policies -->
<string name="manage_trust_agents_summary">View or deactivate trust agents</string>
<!-- Bluetooth settings -->
<!-- Bluetooth settings check box title on Main Settings screen -->
<string name="bluetooth_quick_toggle_title">Bluetooth</string>
<!-- Bluetooth settings check box summary for turning on bluetooth -->
<string name="bluetooth_quick_toggle_summary">Turn on Bluetooth</string>
<!--Used as title on second screen after selecting Bluetooth settings -->
<string name="bluetooth_settings">Bluetooth</string>
<!--Wireless controls screen, settings title for the item to take you to the bluetooth settings screen -->
<string name="bluetooth_settings_title">Bluetooth</string>
<!--Wireless controls screen, settings summary for the item tot ake you to the bluetooth settings screen -->
<string name="bluetooth_settings_summary">Manage connections, set device name &amp; discoverability</string>
<!-- ======================================================================================= -->
<!-- Note: The opening brackets of HTML style tags are escaped (e.g. "<b>" is "&lt;b>") in -->
<!-- the following resources to enable formatting followed by HTML styling, as described -->
<!-- here: http://developer.android.com/guide/topics/resources/string-resource.html -->
<!-- ======================================================================================= -->
<!-- Title for the dialog to enter PIN. [CHAR LIMIT=40] -->
<string name="bluetooth_pairing_request">Pair with <xliff:g id="device_name">%1$s</xliff:g>?</string>
<!-- Message when bluetooth is informing the user of the pairing key. [CHAR LIMIT=NONE] -->
<string name="bluetooth_pairing_key_msg">Bluetooth pairing code</string>
<!-- Message when bluetooth dialog for passkey entry is showing. [CHAR LIMIT=NONE] -->
<string name="bluetooth_enter_passkey_msg">Type the pairing code then press Return or Enter</string>
<!-- Checkbox label for alphanumeric PIN entry (default is numeric PIN). [CHAR LIMIT=50] -->
<string name="bluetooth_enable_alphanumeric_pin">PIN contains letters or symbols</string>
<!-- Bluetooth PIN hint text (below the text entry box). [CHAR LIMIT=30] -->
<string name="bluetooth_pin_values_hint">Usually 0000 or 1234</string>
<!-- Bluetooth PIN hint text (below the text entry box). [CHAR LIMIT=30] -->
<string name="bluetooth_pin_values_hint_16_digits">Must be 16 digits</string>
<!-- Pairing dialog text to remind user to enter the PIN on the other device. [CHAR LIMIT=NONE] -->
<string name="bluetooth_enter_pin_other_device">You may also need to type this PIN on the other device.</string>
<!-- Pairing dialog text to remind user to enter the passkey on the other device. [CHAR LIMIT=NONE] -->
<string name="bluetooth_enter_passkey_other_device">You may also need to type this passkey on the other device.</string>
<!-- Message for confirmation of passkey to complete pairing. [CHAR LIMIT=NONE] -->
<string name="bluetooth_confirm_passkey_msg">To pair with:&lt;br>&lt;b><xliff:g id="device_name">%1$s</xliff:g>&lt;/b>&lt;br>&lt;br>Make sure it is showing this passkey:&lt;br>&lt;b><xliff:g id="passkey">%2$s</xliff:g>&lt;/b></string>
<!-- Message when bluetooth incoming pairing request for (2.1 devices) dialog is showing -->
<string name="bluetooth_incoming_pairing_msg">From:&lt;br>&lt;b><xliff:g id="device_name">%1$s</xliff:g>&lt;/b>&lt;br>&lt;br>Pair with this device?</string>
<!-- Message when bluetooth dialog when passkey or pin needs to be displayed. -->
<string name="bluetooth_display_passkey_pin_msg">To pair with:<xliff:g id="bold1">&lt;br>&lt;b></xliff:g><xliff:g id="device_name">%1$s</xliff:g><xliff:g id="end_bold1">&lt;/b>&lt;br>&lt;br></xliff:g>Type on it:<xliff:g id="bold2">&lt;br>&lt;b></xliff:g><xliff:g id="passkey">%2$s</xliff:g><xliff:g id="end_bold2">&lt;/b></xliff:g>, then press Return or Enter.</string>
<!-- Checkbox message in pairing dialogs. [CHAR LIMIT=NONE] -->
<string name="bluetooth_pairing_shares_phonebook">Allow <xliff:g id="device_name">%1$s</xliff:g> to access your contacts and call history</string>
<!-- Title for BT error dialogs. -->
<string name="bluetooth_error_title"></string>
<!-- Message for the error dialog when BT connecting operation fails generically. -->
<string name="bluetooth_connecting_error_message">Couldn\u2019t connect to <xliff:g id="device_name">%1$s</xliff:g>.</string>
<!-- Bluetooth settings: The title of the preference (list item) that initiates a scan for devices -->
<string name="bluetooth_preference_scan_title">Scan for devices</string>
<!-- Bluetooth settings: The title of the action button that initiates a search for nearby devices [CHAR LIMIT=20] -->
<string name="bluetooth_search_for_devices">Refresh</string>
<!-- Bluetooth settings: The title of the action button while a search for nearby devices is in progress [CHAR LIMIT=20] -->
<string name="bluetooth_searching_for_devices">Searching\u2026</string>
<!-- Bluetooth settings: The sub heading for device settings. [CHAR LIMIT=30] -->
<string name="bluetooth_preference_device_settings">Device settings</string>
<!-- Bluetooth settings: Paired dialog title [CHAR LIMIT=40] -->
<string name="bluetooth_preference_paired_dialog_title">Paired device</string>
<!-- Bluetooth settings: Name label [CHAR LIMIT=40] -->
<string name="bluetooth_preference_paired_dialog_name_label">Name</string>
<!-- Bluetooth settings: Checkbox label for enable/disable internet connection. [CHAR LIMIT=40] -->
<string name="bluetooth_preference_paired_dialog_internet_option">Internet connection</string>
<!-- Bluetooth settings: Checkbox label for enable/disable keyboard connection. [CHAR LIMIT=40] -->
<string name="bluetooth_preference_paired_dialog_keyboard_option">Keyboard</string>
<!-- Bluetooth settings: Checkbox label for enable/disable contacts connection. [CHAR LIMIT=40] -->
<string name="bluetooth_preference_paired_dialog_contacts_option">Contacts and call history</string>
<!-- Bluetooth settings: pairing dialog title. [CHAR LIMIT=40] -->
<string name="bluetooth_pairing_dialog_title">Pair with this device?</string>
<!-- Bluetooth settings: share phone book title. [CHAR LIMIT=40] -->
<string name="bluetooth_pairing_dialog_sharing_phonebook_title">Share phone book?</string>
<!-- Bluetooth settings: Message informing user that a bluetooth wants to access contant and call history. [CHAR LIMIT=100] -->
<string name="bluetooth_pairing_dialog_contants_request"><xliff:g id="device_name">%1$s</xliff:g> wants to access your contacts and call history.</string>
<!-- Bluetooth settings: paring permission message. [CHAR LIMIT=100] -->
<string name="bluetooth_pairing_dialog_paring_request"><xliff:g id="device_name">%1$s</xliff:g> wants to pair with Bluetooth. When connected, it will have access to your contacts and call history.</string>
<!-- Bluetooth settings: The sub heading for devices which have already been paired with this device. [CHAR LIMIT=40] -->
<string name="bluetooth_preference_paired_devices">Paired devices</string>
<!-- Bluetooth settings: The sub heading for available devices during and after scanning. [CHAR LIMIT=40] -->
<string name="bluetooth_preference_found_devices">Available devices</string>
<!-- Bluetooth settings: The message displayed if no Bluetooth devices were found. [CHAR LIMIT=40] -->
<string name="bluetooth_preference_no_found_devices">No devices available</string>
<!-- Bluetooth settings. Context menu item for a device. Action will connect to all profiles on the device. -->
<string name="bluetooth_device_context_connect">Connect</string>
<!-- Bluetooth settings. Context menu item for a device. Action will disconnect from all profiles on the device. -->
<string name="bluetooth_device_context_disconnect">Disconnect</string>
<!-- Bluetooth settings. Context menu item for a device. Action will first pair, and then connect to all profiles on the device. -->
<string name="bluetooth_device_context_pair_connect">Pair &amp; connect</string>
<!-- Bluetooth settings. Context menu item for a device. Action will remove pairing with the device. -->
<string name="bluetooth_device_context_unpair">Unpair</string>
<!-- Bluetooth settings. Context menu item for a device. Action will disconnect and remove pairing with the device. -->
<string name="bluetooth_device_context_disconnect_unpair">Disconnect &amp; unpair</string>
<!-- Bluetooth settings. Context menu item for a device. Action will take the user to another screen where they can choose exactly which profiles to connect to. -->
<string name="bluetooth_device_context_connect_advanced">Options\u2026</string>
<!-- Bluetooth settings. Menu option to Bluetooth advanced settings [CHAR LIMIT=20]-->
<string name="bluetooth_menu_advanced">Advanced</string>
<!-- Bluetooth settings. Title of the advanced bluetooth settings screen [CHAR LIMIT=30]-->
<string name="bluetooth_advanced_titlebar">Advanced Bluetooth</string>
<!-- Bluetooth settings. Text displayed when Bluetooth is off and device list is empty [CHAR LIMIT=50]-->
<string name="bluetooth_empty_list_bluetooth_off">When Bluetooth is turned on, your device can communicate with other nearby Bluetooth devices.</string>
<!-- Message to describe "BLE scan always available feature" when Bluetooth is off. The
place-holders "LINK_BEGIN" and "LINK_END" must NOT be translated. They mark a link to bring
the user to "scanning settings" screen. -->
<string name="ble_scan_notify_text">To improve location accuracy, system apps and services can
still detect Bluetooth devices. You can change this in
<xliff:g id="link_begin">LINK_BEGIN</xliff:g>scanning
settings<xliff:g id="link_end">LINK_END</xliff:g>.</string>
<!-- Bluetooth settings. The title of the screen to pick which profiles to connect to on the device. For example, headphones may have both A2DP and headset, this allows the user to choose which one he wants to connect to. -->
<string name="bluetooth_connect_specific_profiles_title">Connect to\u2026</string>
<!-- Bluetooth settings. Message for disconnecting from the A2DP profile. [CHAR LIMIT=80] -->
<string name="bluetooth_disconnect_a2dp_profile"><xliff:g id="device_name">%1$s</xliff:g> will be disconnected from media audio.</string>
<!-- Bluetooth settings. Message for disconnecting from the headset profile. [CHAR LIMIT=80] -->
<string name="bluetooth_disconnect_headset_profile"><xliff:g id="device_name">%1$s</xliff:g> will be disconnected from handsfree audio.</string>
<!-- Bluetooth settings. Message for disconnecting from the HID profile. [CHAR LIMIT=80] -->
<string name="bluetooth_disconnect_hid_profile"><xliff:g id="device_name">%1$s</xliff:g> will be disconnected from input device.</string>
<!-- Bluetooth settings. Message for disconnecting from the PAN profile (user role). [CHAR LIMIT=80] -->
<string name="bluetooth_disconnect_pan_user_profile">Internet access via <xliff:g id="device_name">%1$s</xliff:g> will be disconnected.</string>
<!-- Bluetooth settings. Message for disconnecting from the PAN profile (NAP role). [CHAR LIMIT=80] -->
<string name="bluetooth_disconnect_pan_nap_profile" product="tablet"><xliff:g id="device_name">%1$s</xliff:g> will be disconnected from sharing this tablet\u2019s Internet connection.</string>
<!-- Bluetooth settings. Message for disconnecting from the PAN profile (NAP role). [CHAR LIMIT=80] -->
<string name="bluetooth_disconnect_pan_nap_profile" product="default"><xliff:g id="device_name">%1$s</xliff:g> will be disconnected from sharing this phone\u2019s Internet connection.</string>
<!-- Bluetooth settings. Connection options screen. The title of the screen. [CHAR LIMIT=40] -->
<string name="bluetooth_device_advanced_title">Paired Bluetooth device</string>
<!-- Bluetooth settings. Connection options screen. The title of the checkbox that controls whether the device is in "online" mode or "offline" mode. This essentially is the checkbox that controls whether any checks / unchecks on a profile should be applied immediately, or next time the device is connected. -->
<string name="bluetooth_device_advanced_online_mode_title">Connect</string>
<!-- Bluetooth settings. Connection options screen. The summary of the online mode checkbox. This describes what the setting does in the context of the screen. -->
<string name="bluetooth_device_advanced_online_mode_summary">Connect to Bluetooth device</string>
<!-- Bluetooth settings. Connection options screen. The title of the header that is above all of the profiles.
When a user decides what Bluetooth capabilities to use with the device. -->
<string name="bluetooth_device_advanced_profile_header_title">Use for</string>
<!-- Bluetooth settings. Connection options screen. Title for option to rename the device. [CHAR LIMIT=30] -->
<string name="bluetooth_device_advanced_rename_device">Rename</string>
<!-- Bluetooth settings. Connection options screen. Title for checkbox to enable incoming file transfers [CHAR LIMIT=30] -->
<string name="bluetooth_device_advanced_enable_opp_title">Allow incoming file transfers</string>
<!-- Bluetooth settings. Connection options screen. The summary for the checkbox preference when PAN is connected (user role). [CHAR LIMIT=25]-->
<string name="bluetooth_pan_user_profile_summary_connected">Connected to device for Internet access</string>
<!-- Bluetooth settings. Connection options screen. The summary for the checkbox preference when PAN is connected (NAP role). [CHAR LIMIT=25]-->
<string name="bluetooth_pan_nap_profile_summary_connected">Sharing local Internet connection with device</string>
<!-- Bluetooth settings. Dock Setting Title -->
<string name="bluetooth_dock_settings">Dock Settings</string>
<!-- Bluetooth settings. Dock Setting Dialog Title -->
<string name="bluetooth_dock_settings_title">Use dock for audio</string>
<!-- Bluetooth settings. Dock Setting Dialog - Checkbox selection 1: Use dock as speaker phone -->
<string name="bluetooth_dock_settings_headset">As speaker phone</string>
<!-- Bluetooth settings. Dock Setting Dialog - Checkbox selection 2: Use dock for media audio -->
<string name="bluetooth_dock_settings_a2dp">For music and media</string>
<!-- Bluetooth settings. Dock Setting Dialog - Remember setting and don't ask user again -->
<string name="bluetooth_dock_settings_remember">Remember settings</string>
<!-- Wifi Assistant title. [CHAR LIMIT=40] -->
<string name="wifi_assistant_title">Wi\u2011Fi Assistant</string>
<!-- Wifi Display settings. The title of the screen. [CHAR LIMIT=40] -->
<string name="wifi_display_settings_title">Cast</string>
<!-- Wifi Display settings. The title of a menu item to enable wireless display [CHAR LIMIT=40] -->
<string name="wifi_display_enable_menu_item">Enable wireless display</string>
<!-- Wifi Display settings. Text that appears when scanning for devices is finished and no nearby device was found [CHAR LIMIT=40]-->
<string name="wifi_display_no_devices_found">No nearby devices were found.</string>
<!-- Wifi Display settings. The status summary for connecting devices. [CHAR LIMIT=40] -->
<string name="wifi_display_status_connecting">Connecting</string>
<!-- Wifi Display settings. The status summary for connected devices. [CHAR LIMIT=40] -->
<string name="wifi_display_status_connected">Connected</string>
<!-- Wifi Display settings. The status summary for devices that's already in use. [CHAR LIMIT=40] -->
<string name="wifi_display_status_in_use">In use</string>
<!-- Wifi Display settings. The status summary for devices that's not available. [CHAR LIMIT=40] -->
<string name="wifi_display_status_not_available">Unavailable</string>
<!-- Wifi Display settings. Image description for device details button. This opens the screen to rename, unpair, etc. a single device. -->
<string name="wifi_display_details">Display settings</string>
<!-- Wifi Display settings. Options dialog. The title of the dialog. [CHAR LIMIT=40] -->
<string name="wifi_display_options_title">Wireless display options</string>
<!-- Wifi Display settings. Options dialog. The forget button text. [CHAR LIMIT=20] -->
<string name="wifi_display_options_forget">Forget</string>
<!-- Wifi Display settings. Options dialog. The done button text. [CHAR LIMIT=20] -->
<string name="wifi_display_options_done">Done</string>
<!-- Wifi Display settings. Options dialog. The name label used when prompting the user to rename the display. [CHAR LIMIT=20] -->
<string name="wifi_display_options_name">Name</string>
<!-- Wifi Display settings. The sub heading for wireless display certification options. [CHAR LIMIT=40] -->
<string name="wifi_display_certification_heading" translatable="false">Certification</string>
<!-- Wifi Display settings. The section title for wireless display session info. [CHAR LIMIT=40] -->
<string name="wifi_display_session_info" translatable="false">Session info</string>
<!-- Wifi Display settings. The checkbox title for enabling listen mode during certification process. [CHAR LIMIT=40] -->
<string name="wifi_display_listen_mode" translatable="false">Enable listen mode</string>
<!-- Wifi Display settings. The checkbox title for enabling autonomous GO during certification process. [CHAR LIMIT=40] -->
<string name="wifi_display_autonomous_go" translatable="false">Enable autonomous GO</string>
<!-- Wifi Display settings. The button text for sending pause trigger during certification process. [CHAR LIMIT=40] -->
<string name="wifi_display_pause" translatable="false">Pause</string>
<!-- Wifi Display settings. The button text for sending play (resume) trigger during certification process. [CHAR LIMIT=40] -->
<string name="wifi_display_resume" translatable="false">Resume</string>
<!-- Wifi Display settings. The dropdown menu title for choosing WPS configuration during certification process. [CHAR LIMIT=40] -->
<string name="wifi_display_wps_config" translatable="false">WPS configuration</string>
<!-- Wifi Display settings. The dropdown menu title for choosing listen channel during certification process. [CHAR LIMIT=40] -->
<string name="wifi_display_listen_channel" translatable="false">Listen channel</string>
<!-- Wifi Display settings. The dropdown menu title for choosing operating channel during certification process. [CHAR LIMIT=40] -->
<string name="wifi_display_operating_channel" translatable="false">Operating channel</string>
<!-- Wifi 2.4GHz is used as an universal itendifier for 2.4GHz band -->
<string name="wifi_band_24ghz">2.4 GHz</string>
<!-- Wifi Internal 5GHz as an universal itendifier for 5GHz band -->
<string name="wifi_band_5ghz">5 GHz</string>
<!-- Link speed on Wifi Status screen -->
<string name="link_speed">%1$d Mbps</string>
<!-- Wifi Alert message when tapping on a preference for a config locked down by device owner. [CHAR LIMIT=200] -->
<string name="wifi_alert_lockdown_by_device_owner"><xliff:g id="app_name">%1$s</xliff:g> manages your device and doesn\u2019t allow modifying or deleting this Wi-Fi network. For more information, contact your administrator.</string>
<!-- NFC settings -->
<!-- Used in the 1st-level settings screen to turn on NFC -->
<string name="nfc_quick_toggle_title">NFC</string>
<!-- Description of NFC in the 1st level settings screen, for a tablet. [CHAR LIMIT=NONE] -->
<string name="nfc_quick_toggle_summary" product="tablet">Allow data exchange when the tablet touches another device</string>
<!-- Description of NFC in the 1st level settings screen, for a phone. [CHAR LIMIT=NONE] -->
<string name="nfc_quick_toggle_summary" product="default">Allow data exchange when the phone touches another device</string>
<!-- Used to enter the Android Beam sharing preferences screen. This phrase is a trademark. [CHAR LIMIT=32] -->
<string name="android_beam_settings_title">Android Beam</string>
<!-- Used to describe the on state of the Android Beam feature [CHAR LIMIT=NONE] -->
<string name="android_beam_on_summary">Ready to transmit app content via NFC</string>
<!-- Used to describe the off state of the Android Beam feature [CHAR LIMIT=NONE] -->
<string name="android_beam_off_summary">Off</string>
<!-- Used to describe the enabled state of the Android Beam feature when NFC, which it relies on, is turned off [CHAR LIMIT=NONE] -->
<string name="android_beam_disabled_summary">Unavailable because NFC is turned off</string>
<!-- Used in the Android Beam sharing preferences screen. This phrase is a trademark. [CHAR LIMIT=32] -->
<string name="android_beam_label">Android Beam</string>
<!-- Explanation of the Android Beam feature in the Android Beam settings panel. The use of "beam" here is as a verb and not considered trademarked. [CHAR LIMIT=NONE] -->
<string name="android_beam_explained">When this feature is turned on, you can beam app content to another NFC-capable device by holding the devices close together. For example, you can beam Browser pages, YouTube videos, People contacts, and more.\n\nJust bring the devices together (typically back to back) and then touch your screen. The app determines what gets beamed.</string>
<!-- Network service discovery settings -->
<!-- Used in the 1st-level settings screen to turn on NSD -->
<string name="nsd_quick_toggle_title">Network service discovery</string>
<!-- Description of NFC in the 1st level settings screen. [CHAR LIMIT=NONE] -->
<string name="nsd_quick_toggle_summary">Allow apps on other devices to discover apps on this device</string>
<!-- Wi-Fi Settings --> <skip />
<!-- Used in the 1st-level settings screen to turn on Wi-Fi -->
<string name="wifi_quick_toggle_title">Wi\u2011Fi</string>
<!-- Used in the 1st-level settings screen as the turn-on summary -->
<string name="wifi_quick_toggle_summary">Turn on Wi\u2011Fi</string>
<!-- Used in the 1st-level settings screen to go to the 2nd-level settings screen [CHAR LIMIT=20]-->
<string name="wifi_settings">Wi\u2011Fi</string>
<!-- Title of the Wi-fi settings screen -->
<string name="wifi_settings_category">Wi\u2011Fi settings</string>
<!-- Title of the Wi-fi settings entry in the left top level menu -->
<string name="wifi_settings_title">Wi\u2011Fi</string>
<!-- Summary text of the Wi-fi settings screen -->
<string name="wifi_settings_summary">Set up &amp; manage wireless access points</string>
<!-- Used in the 1st-level settings screen to turn on Wi-Fi [CHAR LIMIT=60] -->
<string name="wifi_setup_wizard_title">Select Wi\u2011Fi network</string>
<!-- Used by Account creation for turning on Wi-Fi [CHAR LIMIT=60] -->
<string name="wifi_select_network">Select Wi\u2011Fi</string>
<!-- Summary text when turning Wi-Fi or bluetooth on -->
<string name="wifi_starting">Turning Wi\u2011Fi on\u2026</string>
<!-- Summary text when turning Wi-Fi or bluetooth off -->
<string name="wifi_stopping">Turning off Wi\u2011Fi\u2026</string>
<!-- Summary text when Wi-Fi or bluetooth has error -->
<string name="wifi_error">Error</string>
<!-- Summary text when wifi SoftAP started failed due to no legal usable channel allowed in this region by regulatory -->
<string name="wifi_sap_no_channel_error">5 GHz band not available in this country</string>
<!-- Toast message when Wi-Fi or bluetooth is disallowed in airplane mode -->
<string name="wifi_in_airplane_mode">In Airplane mode</string>
<!-- Checkbox title for option to notify user when open networks are nearby -->
<string name="wifi_notify_open_networks">Network notification</string>
<!-- Checkbox summary for option to notify user when open networks are nearby [CHAR LIMIT=60]-->
<string name="wifi_notify_open_networks_summary">Notify whenever a public network is available</string>
<!-- Checkbox title for option to toggle poor network detection -->
<string name="wifi_poor_network_detection">Avoid poor connections</string>
<!-- Checkbox summary for option to toggle poor network detection -->
<string name="wifi_poor_network_detection_summary">Don\u2019t use a Wi\u2011Fi network unless it has a good Internet connection</string>
<!-- Checkbox summary for option to toggle poor network detection [CHAR LIMIT=60] -->
<string name="wifi_avoid_poor_network_detection_summary">Only use networks that have a good Internet connection</string>
<!-- Checkbox title for option to connect to open Wi-Fi automatically [CHAR LIMIT=40] -->
<string name="wifi_automatically_connect_title">Use open Wi\u2011Fi automatically</string>
<!-- Checkbox summary for option to connect to open Wi-Fi automatically [CHAR LIMIT=100] -->
<string name="wifi_automatically_connect_summary">Let a Wi\u2011Fi assistant automatically connect to open networks determined to be high quality</string>
<!-- Dialog title for option to select an app which connects to open Wi-Fi automatically [CHAR LIMIT=40] -->
<string name="wifi_select_assistant_dialog_title">Choose assistant</string>
<!-- Preference title for option to install certificates -->
<string name="wifi_install_credentials">Install certificates</string>
<!-- Message to describe "Wi-Fi scan always available feature" when Wi-Fi is off. The
place-holders "LINK_BEGIN" and "LINK_END" must NOT be translated. They mark a link to bring
the user to "scanning settings" screen. -->
<string name="wifi_scan_notify_text">To improve location accuracy, system apps and services can
still scan for Wi\u2011Fi networks. You can change this in
<xliff:g id="link_begin">LINK_BEGIN</xliff:g>scanning
settings<xliff:g id="link_end">LINK_END</xliff:g>.</string>
<!-- Wifi scan always mode checkbox text -->
<string name="wifi_scan_notify_remember_choice">Don\u2019t show again</string>
<!-- Setting title for setting the wifi sleep policy. Do we keep Wi-Fi active when the screen turns off? -->
<string name="wifi_setting_sleep_policy_title">Keep Wi\u2011Fi on during sleep</string>
<!-- Setting title for setting the wifi sleep policy. Do we keep Wi-Fi active when the screen turns off? [CHAR LIMIT=30] -->
<string name="wifi_setting_on_during_sleep_title">Wi\u2011Fi on during sleep</string>
<!-- Generic error message when the sleep policy could not be set. -->
<string name="wifi_setting_sleep_policy_error">There was a problem changing the setting</string>
<!-- Checkbox title for option to toggle suspend power optimizations [CHAR LIMIT=30] -->
<string name="wifi_suspend_efficiency_title">Improve efficiency</string>
<!-- Checkbox title for option to toggle suspend power optimizations -->
<string name="wifi_suspend_optimizations">Wi\u2011Fi optimization</string>
<!-- Checkbox summary for option to toggle suspend power optimizations -->
<string name="wifi_suspend_optimizations_summary">Minimize battery usage when Wi\u2011Fi is on</string>
<!-- Checkbox summary for option to toggle suspend power optimizations [CHAR LIMIT=30] -->
<string name="wifi_limit_optimizations_summary">Limit battery used by Wi\u2011Fi</string>
<!-- Checkbox title. Should we switch to using cellular data if Wi-Fi is still connected but the Wi-Fi network we're connected to no longer has Internet access (e.g., due to an outage)? -->
<string name="wifi_switch_away_when_unvalidated">Switch to cellular data if Wi\u2011Fi loses Internet access.</string>
<!-- Action bar text message to manually add a wifi network [CHAR LIMIT=20]-->
<string name="wifi_add_network">Add network</string>
<!-- Header for the list of wifi networks-->
<string name="wifi_access_points">Wi\u2011Fi networks</string>
<!-- Menu option to do WPS Push Button [CHAR LIMIT=25]-->
<string name="wifi_menu_wps_pbc">WPS Push Button</string>
<!-- Content description for menu button in Wifi setup. Not shown on the screen. [CHAR LIMIT=NONE] -->
<string name="wifi_menu_more_options">More options</string>
<!-- Menu option to do WPS Pin Entry [CHAR LIMIT=25]-->
<string name="wifi_menu_wps_pin">WPS Pin Entry</string>
<!-- Menu option to launch Wi-Fi Direct settings [CHAR LIMIT=20]-->
<string name="wifi_menu_p2p">Wi\u2011Fi Direct</string>
<!-- Menu option to scan Wi-Fi networks -->
<string name="wifi_menu_scan">Scan</string>
<!-- Menu option to Wi-Fi advanced settings -->
<string name="wifi_menu_advanced">Advanced</string>
<!-- Menu option to connect to a Wi-Fi network -->
<string name="wifi_menu_connect">Connect to network</string>
<!-- Menu option to remember a temporary Wi-Fi network -->
<string name="wifi_menu_remember">Remember network</string>
<!-- Menu option to delete a Wi-Fi network -->
<string name="wifi_menu_forget">Forget network</string>
<!-- Menu option to modify a Wi-Fi network configuration -->
<string name="wifi_menu_modify">Modify network</string>
<!-- Menu option to write a Wi-Fi configuration token to an NFC tag [CHAR_LIMIT=30]-->
<string name="wifi_menu_write_to_nfc">Write to NFC tag</string>
<!-- Wi-Fi settings. text displayed when Wi-Fi is off and network list is empty [CHAR LIMIT=50]-->
<string name="wifi_empty_list_wifi_off">To see available networks, turn Wi\u2011Fi on.</string>
<!-- Wi-Fi settings. text displayed when Wi-Fi is on and network list is empty [CHAR LIMIT=50]-->
<string name="wifi_empty_list_wifi_on">Searching for Wi\u2011Fi networks\u2026</string>
<!-- Wifi Settings. text displayed when user has restriction DISALLOW_CONFIG_WIFI [CHAR LIMIT=NONE]-->
<string name="wifi_empty_list_user_restricted">You don\u2019t have permission to change the Wi\u2011Fi network.</string>
<!-- Wi-Fi settings. title for setup other network button [CHAR LIMIT=35]-->
<string name="wifi_other_network">Add another network</string>
<!-- Wi-Fi settings. content description for more button [CHAR LIMIT=50]-->
<string name="wifi_more">More</string>
<!-- Wi-Fi settings. wps menu title [CHAR LIMIT=25]-->
<string name="wifi_setup_wps">Automatic setup (WPS)</string>
<!-- Dialog for Access Points --> <skip />
<!-- Label to show/hide advanced options [CHAR LIMIT=40] -->
<string name="wifi_show_advanced">Advanced options</string>
<!-- Title for the WPS setup dialog [CHAR LIMIT=50] -->
<string name="wifi_wps_setup_title">Wi\u2011Fi Protected Setup</string>
<!-- Message in WPS dialog at start up [CHAR LIMIT=150] -->
<string name="wifi_wps_setup_msg">Starting WPS\u2026</string>
<!-- Message in WPS dialog for PBC after start up [CHAR LIMIT=150] -->
<string name="wifi_wps_onstart_pbc">Press the Wi\u2011Fi Protected Setup button on your router. It may be called \u201cWPS\u201d or marked with this symbol:</string>
<!-- Message in WPS dialog for PIN after start up [CHAR LIMIT=150] -->
<string name="wifi_wps_onstart_pin">Enter pin <xliff:g id="number">%1$s</xliff:g> on your Wi\u2011Fi router. The setup can take up to two minutes to complete.</string>
<!-- Text displayed when WPS succeeds [CHAR LIMIT=150] -->
<string name="wifi_wps_complete">WPS succeeded. Connecting to the network\u2026</string>
<!-- Text displayed when Wi-Fi is connected through WPS [CHAR LIMIT=150] -->
<string name="wifi_wps_connected">Connected to Wi\u2011Fi network <xliff:g id="network_name">%s</xliff:g></string>
<!-- Text displayed when WPS setup is in progress [CHAR LIMIT=150] -->
<string name="wifi_wps_in_progress">WPS is already in progress and can take up to two minutes to complete</string>
<!-- Text displayed when WPS fails to start [CHAR LIMIT=150] -->
<string name="wifi_wps_failed_generic">WPS failed. Please try again in a few minutes.</string>
<!-- Text displayed when WPS fails due to WEP [CHAR LIMIT=150] -->
<string name="wifi_wps_failed_wep">The wireless router security setting (WEP) is not supported</string>
<!-- Text displayed when WPS fails to TKIP [CHAR LIMIT=150] -->
<string name="wifi_wps_failed_tkip">The wireless router security setting (TKIP) is not supported</string>
<!-- Text displayed when WPS fails due to authentication issues [CHAR LIMIT=150] -->
<string name="wifi_wps_failed_auth">Authentication failure. Please try again.</string>
<!-- Text displayed when WPS fails due to another session [CHAR LIMIT=150] -->
<string name="wifi_wps_failed_overlap">Another WPS session was detected. Please try again in a few minutes.</string>
<!-- Label for the SSID of the network -->
<string name="wifi_ssid">Network name</string>
<!-- Hint for a text field to enter the SSID of a hidden wifi network. [CHAR LIMIT=35] -->
<string name="wifi_ssid_hint">Enter the SSID</string>
<!-- Label for the security of the connection -->
<string name="wifi_security">Security</string>
<!-- Label for the signal strength of the connection -->
<string name="wifi_signal">Signal strength</string>
<!-- Label for the status of the connection -->
<string name="wifi_status">Status</string>
<!-- Label for the link speed of the connection -->
<string name="wifi_speed">Link speed</string>
<!-- Label for the frequency band of the connection -->
<string name="wifi_frequency">Frequency</string>
<!-- Label for the IP address of the connection -->
<string name="wifi_ip_address">IP address</string>
<!-- Hint text for the IP address -->
<string name="wifi_ip_address_hint" translatable="false">192.168.1.128</string>
<!-- Label for Passpoint network -->
<string name="passpoint_label">Saved via</string>
<!-- Content for Passpoint network -->
<string name="passpoint_content"><xliff:g id="name">%1$s</xliff:g> credentials</string>
<!-- Label for the EAP method of the network -->
<string name="wifi_eap_method">EAP method</string>
<!-- Label for the phase2 -->
<string name="please_select_phase2">Phase 2 authentication</string>
<!-- Label for the EAP CA certificate of the network -->
<string name="wifi_eap_ca_cert">CA certificate</string>
<!-- Label for the EAP user certificate of the network -->
<string name="wifi_eap_user_cert">User certificate</string>
<!-- Label for the EAP identity of the network -->
<string name="wifi_eap_identity">Identity</string>
<!-- Label for the EAP anonymous identity of the network -->
<string name="wifi_eap_anonymous">Anonymous identity</string>
<!-- Label for the password of the secured network -->
<string name="wifi_password">Password</string>
<!-- Label for the check box to show password -->
<string name="wifi_show_password">Show password</string>
<!-- Label for the RadioGroup to choose wifi ap band -->
<string name="wifi_ap_band_config">Select AP Band</string>
<!-- Label for the radio button to choose wifi ap 2.4 GHz band -->
<string name="wifi_ap_choose_2G">2.4 GHz Band</string>
<!-- Label for the radio button to choose wifi ap 5GHz band -->
<string name="wifi_ap_choose_5G">5 GHz Band</string>
<!-- Label for the spinner to show ip settings [CHAR LIMIT=25] -->
<string name="wifi_ip_settings">IP settings</string>
<!-- Hint for unchanged fields -->
<string name="wifi_unchanged">(unchanged)</string>
<!-- Hint for unspecified fields -->
<string name="wifi_unspecified">(unspecified)</string>
<!-- Substring of status line when Wi-Fi Protected Setup (WPS) is available and
string is listed first [CHAR LIMIT=20]-->
<string name="wifi_wps_available_first_item">WPS available</string>
<!-- Substring of wifi status when Wi-Fi Protected Setup (WPS) is available and
string is listed after a wifi_secured_* string-->
<string name="wifi_wps_available_second_item">\u0020(WPS available)</string>
<!-- Message in WriteWifiConfigToNfcDialog when prompted to enter network password [CHAR_LIMIT=40] -->
<string name="wifi_wps_nfc_enter_password">Enter your network password</string>
<string name="wifi_scan_always_turnon_message">To improve location accuracy and for other purposes, <xliff:g id="app_name">%1$s</xliff:g> wants to turn on network scanning, even when Wi-Fi is off.\n\nAllow this for all apps that want to scan?</string>
<!-- Message informing the user how to turn off [CHAR LIMIT=200] -->
<string name="wifi_scan_always_turnoff_message">To turn this off, go to Advanced in the overflow menu.</string>
<string name="wifi_scan_always_confirm_allow">Allow</string>
<string name="wifi_scan_always_confirm_deny">Deny</string>
<!-- Dialog label to sign in to a Hotspot. [CHAR LIMIT=50]-->
<string name="wifi_hotspot_title">Sign in to connect?</string>
<!-- Dialog message to sign in to a Hotspot. [CHAR LIMIT=50]-->
<string name="wifi_hotspot_message"><xliff:g id="app_name">%1$s</xliff:g> requires you to sign in online before you connect to the network.</string>
<!-- Wifi settings button to connect in to a Hotspot. [CHAR LIMIT=50]-->
<string name="wifi_hotspot_connect">CONNECT</string>
<!-- Dialog text to tell the user that the selected network does not have Internet access. -->
<string name="no_internet_access_text">This network has no Internet access. Stay connected?</string>
<string name="no_internet_access_remember">Don\u2019t ask again for this network</string>
<!-- Button label to connect to a Wi-Fi network -->
<string name="wifi_connect">Connect</string>
<!-- Failured notification for connect -->
<string name="wifi_failed_connect_message">Failed to connect to network</string>
<!-- Button label to delete a Wi-Fi network -->
<string name="wifi_forget">Forget</string>
<!-- Failured notification for forget -->
<string name="wifi_failed_forget_message">Failed to forget network</string>
<!-- Button label to save a Wi-Fi network configuration -->
<string name="wifi_save">Save</string>
<!-- Failured notification for save -->
<string name="wifi_failed_save_message">Failed to save network</string>
<!-- Button label to dismiss the dialog -->
<string name="wifi_cancel">Cancel</string>
<!-- Button for skipping a step after having been warned of a potential concern [CHAR LIMIT=30] -->
<string name="wifi_skip_anyway">Skip anyway</string>
<!-- Button for going to the previous screen or step [CHAR LIMIT=20] -->
<string name="wifi_dont_skip">Don\u2019t skip</string>
<!-- Text warning about skipping Wi-Fi with a mobile connect (tablet) [CHAR LIMIT=NONE]-->
<string name="wifi_skipped_message" product="tablet">WARNING: if you skip Wi\u2011Fi, your tablet will only use cellular data for initial downloads and updates. To avoid possible data charges, connect to Wi\u2011Fi.</string>
<!-- Text warning about skipping Wi-Fi with a mobile connect (device) [CHAR LIMIT=NONE]-->
<string name="wifi_skipped_message" product="device">WARNING: if you skip Wi\u2011Fi, your device will only use cellular data for initial downloads and updates. To avoid possible data charges, connect to Wi\u2011Fi.</string>
<!-- Text warning about skipping Wi-Fi with a mobile connect (phone) [CHAR LIMIT=NONE]-->
<string name="wifi_skipped_message" product="default">WARNING: if you skip Wi\u2011Fi, your phone will only use cellular data for initial downloads and updates. To avoid possible data charges, connect to Wi\u2011Fi.</string>
<!-- Text warning about skipping Wi-Fi without a mobile connect (tablet) [CHAR LIMIT=NONE] -->
<string name="wifi_and_mobile_skipped_message" product="tablet">If you skip Wi\u2011Fi:\n\n<li>Your tablet won\u2019t have an Internet connection.</li>\n\n<li>You won\u2019t get software updates until you connect to the Internet.</li>\n\n<li>You can\u2019t activate device protection features at this time.</li></string>
<!-- Text warning about skipping Wi-Fi without a mobile connect (device) [CHAR LIMIT=NONE] -->
<string name="wifi_and_mobile_skipped_message" product="device">If you skip Wi\u2011Fi:\n\n<li>Your device won\u2019t have an Internet connection.</li>\n\n<li>You won\u2019t get software updates until you connect to the Internet.</li>\n\n<li>You can\u2019t activate device protection features at this time.</li></string>
<!-- Text warning about skipping Wi-Fi without a mobile connect (phone) [CHAR LIMIT=NONE] -->
<string name="wifi_and_mobile_skipped_message" product="default">If you skip Wi\u2011Fi:\n\n<li>Your phone won\u2019t have an Internet connection.</li>\n\n<li>You won\u2019t get software updates until you connect to the Internet.</li>\n\n<li>You can\u2019t activate device protection features at this time.</li></string>
<!-- Text alerting that Wi-Fi couldn't connect (tablet) [CHAR LIMIT=NONE] -->
<string name="wifi_connect_failed_message" product="tablet">The tablet was unable to connect to this Wi\u2011Fi network.</string>
<!-- Text alerting that Wi-Fi couldn't connect (device) [CHAR LIMIT=NONE] -->
<string name="wifi_connect_failed_message" product="device">The device was unable to connect to this Wi\u2011Fi network.</string>
<!-- Text alerting that Wi-Fi couldn't connect (phone) [CHAR LIMIT=NONE] -->
<string name="wifi_connect_failed_message" product="default">The phone was unable to connect to this Wi\u2011Fi network.</string>
<!-- Wi-Fi Advanced Settings --> <skip />
<!-- Wi-Fi settings screen, Saved networks, settings section. This is a header shown above Saved networks wifi settings. [CHAR LIMIT=30] -->
<string name="wifi_saved_access_points_titlebar">Saved networks</string>
<!-- Wi-Fi settings screen, advanced, settings section. This is a header shown above advanced wifi settings. [CHAR LIMIT=30] -->
<string name="wifi_advanced_titlebar">Advanced Wi\u2011Fi</string>
<!-- Wi-Fi settings screen, setting title for setting the band [CHAR LIMIT=50]-->
<string name="wifi_setting_frequency_band_title">Wi\u2011Fi frequency band</string>
<!-- Wi-Fi settings screen, setting summary for setting the wifi frequency band [CHAR LIMIT=50]-->
<string name="wifi_setting_frequency_band_summary">Specify the frequency range of operation</string>
<!-- Wi-Fi settings screen, error message when the frequency band could not be set [CHAR LIMIT=50]. -->
<string name="wifi_setting_frequency_band_error">There was a problem setting the frequency band.</string>
<!-- Wi-Fi settings screen, advanced, title of the item to show the Wi-Fi device's MAC address. -->
<string name="wifi_advanced_mac_address_title">MAC address</string>
<!-- Title of the screen to adjust IP settings -->
<!-- Wi-Fi settings screen, advanced, title of the item to show the Wi-Fi device's current IP address. -->
<string name="wifi_advanced_ip_address_title">IP address</string>
<!-- Wifi saved access points. Used as a label under the shortcut icon that goes to Wifi saved access points. [CHAR LIMIT=20] -->
<string name="wifi_saved_access_points_label">Saved networks</string>
<!-- Wifi Advanced settings. Used as a label under the shortcut icon that goes to Wifi advanced settings. [CHAR LIMIT=20] -->
<string name="wifi_advanced_settings_label">IP settings</string>
<!-- Menu item to save the IP settings -->
<string name="wifi_ip_settings_menu_save">Save</string>
<!-- Menu ietm to cancel the IP settings -->
<string name="wifi_ip_settings_menu_cancel">Cancel</string>
<!-- Error message if the IP address is not valid [CHAR LIMIT=50]-->
<string name="wifi_ip_settings_invalid_ip_address">Type a valid IP address.</string>
<!-- Error message if the gateway is not valid [CHAR LIMIT=50]-->
<string name="wifi_ip_settings_invalid_gateway">Type a valid gateway address.</string>
<!-- Error message if the dns is not valid [CHAR LIMIT=50]-->
<string name="wifi_ip_settings_invalid_dns">Type a valid DNS address.</string>
<!-- Error message if the network prefix length is not valid [CHAR LIMIT=50]-->
<string name="wifi_ip_settings_invalid_network_prefix_length">Type a network prefix length between 0 and 32.</string>
<!-- Label for the DNS (first one) -->
<string name="wifi_dns1">DNS 1</string>
<!-- Hint text for DNS -->
<string name="wifi_dns1_hint" translatable="false">8.8.8.8</string>
<!-- Label for the DNS (second one)-->
<string name="wifi_dns2">DNS 2</string>
<!-- Hint text for DNS -->
<string name="wifi_dns2_hint" translatable="false">8.8.4.4</string>
<!-- Label for the gateway of the network -->
<string name="wifi_gateway">Gateway</string>
<!-- Hint text for the gateway -->
<string name="wifi_gateway_hint" translatable="false">192.168.1.1</string>
<!-- Label for the network prefix of the network [CHAR LIMIT=25]-->
<string name="wifi_network_prefix_length">Network prefix length</string>
<!-- Hint text for network prefix length -->
<string name="wifi_network_prefix_length_hint" translatable="false">24</string>
<!-- Wi-Fi p2p / Wi-Fi Direct settings -->
<!-- Used in the 1st-level settings screen to launch Wi-fi Direct settings [CHAR LIMIT=25] -->
<string name="wifi_p2p_settings_title">Wi\u2011Fi Direct</string>
<string name="wifi_p2p_device_info">Device information</string>
<string name="wifi_p2p_persist_network">Remember this connection</string>
<!-- Menu option to discover peers-->
<string name="wifi_p2p_menu_search">Search for devices</string>
<!-- Menu option when discovery is in progress [CHAR LIMIT=25] -->
<string name="wifi_p2p_menu_searching">Searching\u2026</string>
<!-- Menu option to Rename-->
<string name="wifi_p2p_menu_rename">Rename device</string>
<!-- Title for available p2p devices -->
<string name="wifi_p2p_peer_devices">Peer devices</string>
<!-- Title for remembered p2p groups -->
<string name="wifi_p2p_remembered_groups">Remembered groups</string>
<!-- Toast text for a failed connection initiation -->
<string name="wifi_p2p_failed_connect_message">Couldn\u2019t connect.</string>
<!-- Message text for failure to rename -->
<string name="wifi_p2p_failed_rename_message">Failed to rename device.</string>
<!-- Title for disconnect dialog -->
<string name="wifi_p2p_disconnect_title">Disconnect?</string>
<!-- Message text for disconnection from one device-->
<string name="wifi_p2p_disconnect_message">If you disconnect, your connection with <xliff:g id="peer_name">%1$s</xliff:g> will end.</string>
<!-- Message text for disconnection from multiple devices-->
<string name="wifi_p2p_disconnect_multiple_message">If you disconnect, your connection with <xliff:g id="peer_name">%1$s</xliff:g> and <xliff:g id="peer_count">%2$s</xliff:g> other devices will end.</string>
<!-- Title for cancel connect dialog -->
<string name="wifi_p2p_cancel_connect_title">Cancel invitation?</string>
<!-- Message text for disconnection from one device-->
<string name="wifi_p2p_cancel_connect_message">Do you want to cancel invitation to connect with <xliff:g id="peer_name">%1$s</xliff:g>?</string>
<!-- Message text for remembered group deletion-->
<string name="wifi_p2p_delete_group_message">Forget this group?</string>
<!-- Wifi AP settings-->
<!-- Label for Wifi tether checkbox. Toggles Access Point on/off -->
<string name="wifi_tether_checkbox_text">Portable Wi\u2011Fi hotspot</string>
<!-- Label for Wifi tether checkbox. Toggles Access Point on/off [CHAR LIMIT=30] -->
<string name="wifi_hotspot_checkbox_text">Wi\u2011Fi hotspot</string>
<!-- Label for Wifi tether checkbox summary. Toggles Access Point on/off [CHAR LIMIT=60] -->
<string name="wifi_hotspot_checkbox_text_summary">Use cellular connection to provide Wi\u2011Fi network</string>
<!-- Summary text when turning hotspot on -->
<string name="wifi_tether_starting">Turning hotspot on\u2026</string>
<!-- Summary text when turning hotspot off -->
<string name="wifi_tether_stopping">Turning off hotspot\u2026</string>
<!-- Subtext for wifi tether checkbox on success -->
<string name="wifi_tether_enabled_subtext">Portable hotspot <xliff:g id="network_ssid">%1$s</xliff:g> active</string>
<!-- Subtext for wifi tether checkbox on failure -->
<string name="wifi_tether_failed_subtext">Portable Wi\u2011Fi hotspot error</string>
<!-- Used to open the ssid and security dialog for Wifi Access Point -->
<string name="wifi_tether_configure_ap_text">Set up Wi\u2011Fi hotspot</string>
<!-- Used to open the ssid and security dialog for Wifi Access Point. [CHAR LIMIT=30]-->
<string name="wifi_hotspot_configure_ap_text">Wi\u2011Fi hotspot setup</string>
<!-- Summary Used to open the ssid and security dialog for Wifi Access Point. [CHAR LIMIT=60] -->
<string name="wifi_hotspot_configure_ap_text_summary">AndroidAP WPA2 PSK portable Wi\u2011Fi hotspot</string>
<!-- Subtext on configuration preference to indicate SSID and security chosen -->
<string name="wifi_tether_configure_subtext"><xliff:g id="network_ssid">%1$s</xliff:g> <xliff:g id="network_security">%2$s</xliff:g> portable Wi\u2011Fi hotspot</string>
<!-- Default access point SSID used for tethering -->
<string name="wifi_tether_configure_ssid_default">AndroidHotspot</string>
<!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
Wi-Fi Testing on the diagnostic screen-->
<string name="testing_wifi_info" translatable="false">Wi-Fi information</string>
<!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
Menu item for WifiManager disableNetwork API-->
<string name="disableNetwork" translatable="false">disableNetwork</string>
<!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
Menu item for WifiManager enableNetwork API-->
<string name="enableNetwork" translatable="false">enableNetwork</string>
<!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
Menu item for WifiManager disconnect API-->
<string name="disconnect" translatable="false">disconnect</string>
<!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
Menu item for WifiManager getConfiguredNetworks API-->
<string name="getConfiguredNetworks" translatable="false">getConfiguredNetworks</string>
<!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
Menu item for WifiManager getConnectionInfo API-->
<string name="getConnectionInfo" translatable="false">getConnectionInfo</string>
<!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
Menu item on Wifi information screen-->
<string name="wifi_api_test" translatable="false">Wi-Fi API</string>
<!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
Menu item on Wifi information screen-->
<string name="wifi_status_test" translatable="false">Wi-Fi status</string>
<!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
Button text on Wifi Status screen-->
<string name="wifi_update" translatable="false">Refresh stats</string>
<!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
Label on Wifi Status screen-->
<string name="wifi_state_label" translatable="false">Wi-Fi state:</string>
<!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
Label on Wifi Status screen-->
<string name="network_state_label" translatable="false">Network state:</string>
<!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
Label on Wifi Status screen-->
<string name="supplicant_state_label" translatable="false">Supplicant state:</string>
<!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
Label on Wifi Status screen-->
<string name="rssi_label" translatable="false">RSSI:</string>
<!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
Label on Wifi Status screen-->
<string name="bssid_label" translatable="false">BSSID:</string>
<!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
Label on Wifi Status screen-->
<string name="ssid_label" translatable="false">SSID:</string>
<!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
Label on Wifi Status screen-->
<string name="hidden_ssid_label" translatable="false">Hidden SSID:</string>
<!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
Label on Wifi Status screen-->
<string name="ipaddr_label" translatable="false">IPaddr:</string>
<!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
Label on Wifi Status screen-->
<string name="macaddr_label" translatable="false">MAC addr:</string>
<!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
Label on Wifi Status screen-->
<string name="networkid_label" translatable="false">Network ID:</string>
<!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
Label on Wifi Status screen-->
<string name="link_speed_label" translatable="false">Link speed:</string>
<!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
Label on Wifi Status screen-->
<string name="scan_list_label" translatable="false">Scan results:</string>
<!-- wifi state values-->
<!-- Do not translate. Used for diagnostic screens, precise translation is not necessary -->
<string name="wifi_state_disabling" translatable="false">Disabling</string>
<!-- Do not translate. Used for diagnostic screens, precise translation is not necessary -->
<string name="wifi_state_disabled" translatable="false">Disabled</string>
<!-- Do not translate. Used for diagnostic screens, precise translation is not necessary -->
<string name="wifi_state_enabling" translatable="false">Enabling</string>
<!-- Do not translate. Used for diagnostic screens, precise translation is not necessary -->
<string name="wifi_state_enabled" translatable="false">Enabled</string>
<!-- Do not translate. Used for diagnostic screens, precise translation is not necessary -->
<string name="wifi_state_unknown" translatable="false">Unknown</string>
<!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
Menu item on Wifi information screen-->
<string name="wifi_config_info" translatable="false">Wi-Fi config</string>
<!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
Label on Wifi Configuration screen-->
<string name="config_list_label" translatable="false">Configured networks</string>
<!-- Wireless networks, item title to go into the WFC settings [CHAR LIMIT=30] -->
<string name="wifi_calling_settings_title">Wi-Fi calling</string>
<!-- WFC mode [CHAR LIMIT=30] -->
<string name="wifi_calling_mode_title">Calling preference</string>
<!-- WFC mode dialog [CHAR LIMIT=30] -->
<string name="wifi_calling_mode_dialog_title">Wi-Fi calling mode</string>
<string-array name="wifi_calling_mode_choices">
<item>Wi-Fi preferred</item>
<item>Cellular preferred</item>
</string-array>
<string-array name="wifi_calling_mode_values">
<item>"2"</item>
<item>"1"</item>
</string-array>
<!-- Wi-Fi Calling settings. Text displayed when Wi-Fi Calling is off -->
<string name="wifi_calling_off_explanation">When Wi-Fi calling is on, your phone can route calls via Wi-Fi networks or your carrier\u2019s network, depending on your preference and which signal is stronger. Before turning on this feature, check with your carrier regarding fees and other details.</string>
<!-- Sound and alerts settings -->
<skip/>
<!-- Main Settings screen setting option name to go into the display settings screen -->
<string name="home_settings">Home</string>
<string name="display_settings_title">Display</string>
<!-- Sound settings screen heading -->
<string name="sound_settings">Sound</string>
<!-- Sound settings screen, setting option summary text -->
<string name="ringtone_summary">""</string>
<!-- Sound settings screen, volume title -->
<string name="all_volume_title">Volumes</string>
<!-- Sound settings screen, music effects title [CHAR LIMIT=30]-->
<string name="musicfx_title">Music effects</string>
<!-- Sound settings screen, setting option name -->
<string name="ring_volume_title">Ringer volume</string>
<!-- Sound settings screen, setting option name checkbox -->
<string name="vibrate_in_silent_title">Vibrate when silent</string>
<!-- Sound settings screen, setting option name -->
<string name="notification_sound_title">Default notification sound</string>
<!-- Sound settings screen, the title of the volume bar to adjust the incoming call volume -->
<string name="incoming_call_volume_title">Ringtone</string>
<!-- Sound settings screen, the title of the volume bar to adjust the notification volume -->
<string name="notification_volume_title">Notification</string>
<!-- Sound settings screen, the caption of the checkbox for having the notification volume be
the same as the incoming call volume. -->
<string name="checkbox_notification_same_as_incoming_call">Use incoming call volume for notifications</string>
<!-- Home settings screen, text indicating that a launcer does not support work profiles [CHAR LIMIT=100] -->
<string name="home_work_profile_not_supported">Doesn\u2019t support work profiles</string>
<!-- Sound settings screen, setting option title-->
<string name="notification_sound_dialog_title">Default notification sound</string>
<!-- Sound settings screen, setting option name -->
<string name="media_volume_title">Media</string>
<!-- Sound settings screen, setting option summary text -->
<string name="media_volume_summary">Set volume for music and videos</string>
<!-- Sound settings screen, alarm volume slider title -->
<string name="alarm_volume_title">Alarm</string>
<!-- Sound settings screen, dock settings summary-->
<string name="dock_settings_summary">Audio settings for the attached dock</string>
<!-- Sound settings screen, setting check box label -->
<string name="dtmf_tone_enable_title">Dial pad touch tones</string>
<!-- Sound settings screen, setting check box label -->
<string name="sound_effects_enable_title">Touch sounds</string>
<!-- Sound settings screen, setting check box label -->
<string name="lock_sounds_enable_title">Screen lock sound</string>
<!-- Sound settings screen, setting check box label -->
<string name="haptic_feedback_enable_title">Vibrate on touch</string>
<!-- Sound settings screen, setting option name checkbox to enable/disable audio recording features that improve audio recording in noisy environments -->
<string name="audio_record_proc_title">Noise cancellation</string>
<!-- Volume description for media volume -->
<string name="volume_media_description">Music, video, games, &amp; other media</string>
<!-- Volume description for ringtone and notification volume -->
<string name="volume_ring_description">Ringtone &amp; notifications</string>
<!-- Volume description for notification volume -->
<string name="volume_notification_description">Notifications</string>
<!-- Volume description for alarm volume -->
<string name="volume_alarm_description">Alarms</string>
<!-- Image description for ringer volume mute button. -->
<string name="volume_ring_mute">Mute ringtone &amp; notifications</string>
<!-- Image description for media volume mute button. -->
<string name="volume_media_mute">Mute music &amp; other media</string>
<!-- Image description for notification volume mute button. -->
<string name="volume_notification_mute">Mute notifications</string>
<!-- Image description for alarm volume mute button. -->
<string name="volume_alarm_mute">Mute alarms</string>
<!-- Dock settings title, top level -->
<string name="dock_settings">Dock</string>
<!-- Dock settings title -->
<string name="dock_settings_title">Dock settings</string>
<!-- Dock audio settings -->
<string name="dock_audio_settings_title">Audio</string>
<!-- Dock audio summary for docked to desk dock -->
<string name="dock_audio_summary_desk">Settings for the attached desktop dock</string>
<!-- Dock audio summary for docked to car dock -->
<string name="dock_audio_summary_car">Settings for the attached car dock</string>
<!-- Dock audio summary for undocked -->
<string name="dock_audio_summary_none" product="tablet">Tablet not docked</string>
<!-- Dock audio summary for undocked -->
<string name="dock_audio_summary_none" product="default">Phone not docked</string>
<!-- Dock audio summary for docked to unknown -->
<string name="dock_audio_summary_unknown">Settings for the attached dock</string>
<!-- Dock not found dialog title -->
<string name="dock_not_found_title">Dock not found</string>
<!-- Dock not found dialog text -->
<string name="dock_not_found_text" product="tablet">You need to dock the tablet before setting up dock audio.</string>
<!-- Dock not found dialog text -->
<string name="dock_not_found_text" product="default">You need to dock the phone before setting up dock audio.</string>
<!-- Dock settings screen, dock events SFX setting check box label -->
<string name="dock_sounds_enable_title">Dock insert sound</string>
<!-- Dock settings screen, setting option summary text when check box is selected -->
<string name="dock_sounds_enable_summary_on" product="tablet">Play sound when inserting or removing tablet from dock</string>
<!-- Dock settings screen, setting option summary text when check box is selected -->
<string name="dock_sounds_enable_summary_on" product="default">Play sound when inserting or removing phone from dock</string>
<!-- Sound settings screen, setting option summary text when check box is clear -->
<string name="dock_sounds_enable_summary_off" product="tablet">Don\u2019t play sound when inserting or removing tablet from dock</string>
<!-- Sound settings screen, setting option summary text when check box is clear -->
<string name="dock_sounds_enable_summary_off" product="default">Don\u2019t play sound when inserting or removing phone from dock</string>
<!-- Account settings header. [CHAR LIMIT=30] -->
<string name="account_settings">Accounts</string>
<!-- Header for items under the personal user [CHAR LIMIT=30] -->
<string name="category_personal">Personal</string>
<!-- Header for items under the work user [CHAR LIMIT=30] -->
<string name="category_work">Work</string>
<!-- Content description for work profile accounts group [CHAR LIMIT=NONE] -->
<string name="accessibility_category_work">Work profile accounts - <xliff:g id="managed_by" example="Managed by Corporate application">%s</xliff:g></string>
<!-- Content description for personal profile accounts group [CHAR LIMIT=NONE] -->
<string name="accessibility_category_personal">Personal profile accounts</string>
<!-- Content description for work profile details page title [CHAR LIMIT=NONE] -->
<string name="accessibility_work_account_title">Work account - <xliff:g id="managed_by" example="Email provider">%s</xliff:g></string>
<!-- Content description for personal profile details page title [CHAR LIMIT=NONE] -->
<string name="accessibility_personal_account_title">Personal account - <xliff:g id="managed_by" example="Email provider">%s</xliff:g></string>
<!-- Main Settings screen, setting option name to go into search settings -->
<string name="search_settings">Search</string>
<!-- Main Settings screen, setting option summary to go into search settings -->
<string name="search_settings_summary">Manage search settings and history</string>
<!-- Display settings --><skip/>
<!-- Sound & display settings screen, section header for settings related to display -->
<string name="display_settings">Display</string>
<!-- Sound & display settings screen, accelerometer-based rotation check box label -->
<string name="accelerometer_title">Auto-rotate screen</string>
<!-- Sound & display settings screen, accelerometer-based rotation summary text when check box is selected -->
<string name="accelerometer_summary_on" product="tablet">Switch orientation automatically when rotating tablet</string>
<!-- Sound & display settings screen, accelerometer-based rotation summary text when check box is selected -->
<string name="accelerometer_summary_on" product="default">Switch orientation automatically when rotating phone</string>
<!-- Sound & display settings screen, accelerometer-based rotation summary text when check box is clear -->
<string name="accelerometer_summary_off" product="tablet">Switch orientation automatically when rotating tablet</string>
<!-- Sound & display settings screen, accelerometer-based rotation summary text when check box is clear -->
<string name="accelerometer_summary_off" product="default">Switch orientation automatically when rotating phone</string>
<!-- Sound & display settings screen, setting option name to change brightness level -->
<string name="brightness">Brightness level</string>
<!-- Sound & display settings screen, setting option name to change brightness level [CHAR LIMIT=30] -->
<string name="brightness_title">Brightness</string>
<!-- Sound & display settings screen, setting option summary to change brightness level -->
<string name="brightness_summary">Adjust the brightness of the screen</string>
<!-- Sound & display settings screen, setting option name to enable adaptive brightness [CHAR LIMIT=30] -->
<string name="auto_brightness_title">Adaptive brightness</string>
<!-- Sound & display settings screen, setting option summary to enable adaptive brightness [CHAR LIMIT=100] -->
<string name="auto_brightness_summary">Optimize brightness level for available light</string>
<!-- Sound & display settings screen, setting option name to change the user interface theme [CHAR LIMIT=30] -->
<string name="night_mode_title">Theme</string>
<!-- Sound & display settings screen, setting option summary to change the user interface theme [CHAR LIMIT=100] -->
<string name="night_mode_summary">%s</string>
<!-- Sound & display settings screen, theme setting value to prefer a light-colored user interface [CHAR LIMIT=30] -->
<string name="night_mode_no">Light</string>
<!-- Sound & display settings screen, theme setting value to prefer a dark-colored user interface [CHAR LIMIT=30] -->
<string name="night_mode_yes">Dark</string>
<!-- Sound & display settings screen, theme setting value to automatically switch between a light- or dark-colored user interface [CHAR LIMIT=30] -->
<string name="night_mode_auto">Automatic</string>
<!-- Sound & display settings screen, setting option name to change screen timeout -->
<string name="screen_timeout">Sleep</string>
<!-- Sound & display settings screen, setting option name to change screen timeout [CHAR LIMIT=30] -->
<string name="screen_timeout_title">Screen turns off</string>
<!-- Sound & display settings screen, setting option summary to change screen timeout -->
<string name="screen_timeout_summary">After <xliff:g id="timeout_description">%1$s</xliff:g> of inactivity</string>
<!-- Wallpaper settings title [CHAR LIMIT=30] -->
<string name="wallpaper_settings_title">Wallpaper</string>
<!-- Wallpaper settings fragment title [CHAR LIMIT=30] -->
<string name="wallpaper_settings_fragment_title">Choose wallpaper from</string>
<!-- Display settings screen, trigger for screen saver options -->
<string name="screensaver_settings_title">Daydream</string>
<!-- Display settings screen, summary fragment for screen saver options, activated when docked or asleep and charging -->
<string name="screensaver_settings_summary_either_long">When docked or asleep and charging</string>
<!-- Dream settings screen, dialog option, activated when docked or asleep and charging -->
<string name="screensaver_settings_summary_either_short">Either</string>
<!-- Display settings screen, summary fragment for screen saver options, activated when asleep and charging -->
<string name="screensaver_settings_summary_sleep">While charging</string>
<!-- Display settings screen, summary fragment for screen saver options, activated when docked -->
<string name="screensaver_settings_summary_dock">While docked</string>
<!-- Display settings screen, summary for screen saver options, screen saver is turned off -->
<string name="screensaver_settings_summary_off">Off</string>
<!-- Dream settings screen, caption for when dreams are disabled -->
<string name="screensaver_settings_disabled_prompt">To control what happens when the phone is docked and/or sleeping, turn Daydream on.</string>
<!-- Dream settings screen, action label, when to dream -->
<string name="screensaver_settings_when_to_dream">When to daydream</string>
<!-- Dream settings screen, button label to start dreaming -->
<string name="screensaver_settings_dream_start">Start now</string>
<!-- Dream settings screen, button label for settings for a specific screensaver -->
<string name="screensaver_settings_button">Settings</string>
<!-- Sound & display settings screen, setting option name to change whether the screen adjusts automatically based on lighting conditions -->
<string name="automatic_brightness">Automatic brightness</string>
<!-- [CHAR LIMIT=40] Display settings screen, setting option name to change whether the device wakes up when a lift gesture is detected. -->
<string name="lift_to_wake_title">Lift to wake</string>
<!-- [CHAR LIMIT=30] Display settings screen, setting option name to change whether the ambient display feature is enabled. -->
<string name="doze_title">Ambient display</string>
<!-- [CHAR LIMIT=NONE] Display settings screen, setting description for the ambient display feature. -->
<string name="doze_summary">Wake screen when you pick up device or receive notifications</string>
<!-- [CHAR LIMIT=30] Sound & display settings screen, setting option name to change font size -->
<string name="title_font_size">Font size</string>
<!-- Sound & display settings screen, setting option summary displaying the currently selected font size -->
<string name="summary_font_size" translatable="false">%1$s</string>
<!-- [CHAR LIMIT=40] Sound & display settings screen, title of dialog for picking font size -->
<string name="dialog_title_font_size">Font size</string>
<!-- SIM lock settings title [CHAR LIMIT=40] -->
<string name="sim_lock_settings">SIM card lock settings</string>
<!-- Security & location settings screen, setting option name [CHAR LIMIT=40] -->
<string name="sim_lock_settings_category">Set up SIM card lock</string>
<!-- Security & location settings screen, section heading for settings related to sim card locking [CHAR LIMIT=40] -->
<string name="sim_lock_settings_title">SIM card lock</string>
<!-- SIM card lock settings screen, setting check box label [CHAR LIMIT=40] -->
<string name="sim_pin_toggle">Lock SIM card</string>
<!-- SIM card lock settings screen, setting option summary text when SIM lock check box is selected [CHAR LIMIT=40] -->
<string name="sim_lock_on" product="tablet">Require PIN to use tablet</string>
<!-- SIM card lock settings screen, setting option summary text when SIM lock check box is selected [CHAR LIMIT=40] -->
<string name="sim_lock_on" product="default">Require PIN to use phone</string>
<!-- SIM card lock settings screen, setting option summary text when SIM lock check box is clear [CHAR LIMIT=40] -->
<string name="sim_lock_off" product="tablet">Require PIN to use tablet</string>
<!-- SIM card lock settings screen, setting option summary text when SIM lock check box is clear [CHAR LIMIT=40] -->
<string name="sim_lock_off" product="default">Require PIN to use phone</string>
<!-- SIM card lock settings screen, setting option name to change the SIM PIN [CHAR LIMIT=40] -->
<string name="sim_pin_change">Change SIM PIN</string>
<!-- SIM card lock settings screen, SIM PIN dialog message instruction [CHAR LIMIT=40] -->
<string name="sim_enter_pin">SIM PIN</string>
<!-- SIM card lock settings screen, SIM PIN dialog message instruction [CHAR LIMIT=40] -->
<string name="sim_enable_sim_lock">Lock SIM card</string>
<!-- SIM card lock settings screen, SIM PIN dialog message instruction [CHAR LIMIT=40] -->
<string name="sim_disable_sim_lock">Unlock SIM card</string>
<!-- SIM card lock settings screen, SIM PIN dialog message instruction [CHAR LIMIT=40] -->
<string name="sim_enter_old">Old SIM PIN</string>
<!-- SIM card lock settings screen, SIM PIN dialog message instruction [CHAR LIMIT=40] -->
<string name="sim_enter_new">New SIM PIN</string>
<!-- SIM card lock settings screen, Re-type new PIN. [CHAR LIMIT=40] -->
<string name="sim_reenter_new">Re\u2011type new PIN</string>
<!-- SIM card lock settings screen, SIM PIN dialog message instruction [CHAR LIMIT=40] -->
<string name="sim_change_pin">SIM PIN</string>
<!-- SIM card lock settings screen, SIM PIN dialog message when wrong PIN is entered [CHAR LIMIT=40] -->
<string name="sim_bad_pin">Incorrect PIN</string>
<!-- SIM card lock settings screen, SIM PIN dialog message when PINs don't match [CHAR LIMIT=40] -->
<string name="sim_pins_dont_match">PINs don\u2019t match</string>
<!-- SIM card lock settings screen, toast after not entering correct SIM PIN [CHAR LIMIT=40] -->
<string name="sim_change_failed">Can\u2019t change PIN.\nPossibly incorrect PIN.</string>
<!-- SIM card lock settings screen, SIM PIN dialog message when the entered PIN is correct [CHAR LIMIT=40] -->
<string name="sim_change_succeeded">SIM PIN changed successfully</string>
<!-- SIM card lock settings screen, toast after not entering correct SIM PIN [CHAR LIMIT=40] -->
<string name="sim_lock_failed">Can\u2019t change SIM card lock state.\nPossibly incorrect PIN.</string>
<!-- SIM card lock settings screen, SIM PIN dialog button labels: [CHAR LIMIT=40] -->
<string name="sim_enter_ok">OK</string>
<!-- SIM card lock settings screen, SIM PIN dialog button labels: [CHAR LIMIT=40] -->
<string name="sim_enter_cancel">Cancel</string>
<!-- Multiple SIMs found title. [CHAR LIMIT=40] -->
<string name="sim_multi_sims_title">Multiple SIMs found</string>
<!-- Multiple SIMs found summary. [CHAR LIMIT=100] -->
<string name="sim_multi_sims_summary">Choose the SIM you prefer for cellular data.</string>
<!-- Title asking user if they wish to change the default sim for cellular data. [CHAR LIMIT=30] -->
<string name="sim_change_data_title">Change data SIM?</string>
<!-- Message confirming the user wishes to change the default data SIM from one to another. [CHAR LIMIT=NONE] -->
<string name="sim_change_data_message">Use <xliff:g id="new_sim">%1$s</xliff:g> instead of <xliff:g id="old_sim">%2$s</xliff:g> for cellular data?</string>
<!-- Title for the dialog asking to user to change the preferred SIM [CHAR LIMIT=30] -->
<string name="sim_preferred_title">Update preferred SIM card?</string>
<!-- Message for the dialog asking to user to change the preferred SIM [CHAR LIMIT=NONE] -->
<string name="sim_preferred_message"><xliff:g id="new_sim">%1$s</xliff:g> is the only SIM in your device. Do you want to use this SIM for cellular data, calls, and SMS messages?</string>
<!-- Instructions telling the user that they entered the wrong SIM PIN for the last time.
Displayed in a dialog box. [CHAR LIMIT=100] -->
<string name="wrong_pin_code_pukked">Incorrect SIM PIN code you must now contact your carrier to unlock your device.</string>
<!-- Instructions telling the user that they entered the wrong SIM PIN while trying to unlock the keyguard. Displayed in a dialog box. [CHAR LIMIT=100] -->
<plurals name="wrong_pin_code">
<item quantity="one">Incorrect SIM PIN code, you have <xliff:g id="number">%d</xliff:g> remaining attempt before you must contact your carrier to unlock your device.</item>
<item quantity="other">Incorrect SIM PIN code, you have <xliff:g id="number">%d</xliff:g> remaining attempts.</item>
</plurals>
<!-- Instructions telling the user that the operation to unlock the keyguard with SIM PIN failed. Displayed in one line in a large font. [CHAR LIMIT=40] -->
<string name="pin_failed">SIM PIN operation failed!</string>
<!-- Advanced (used for diagnostics) device info activity title [CHAR LIMIT=40] -->
<string name="device_info_settings" product="tablet">Tablet status</string>
<!-- Advanced (used for diagnostics) device info activity title [CHAR LIMIT=40] -->
<string name="device_info_settings" product="default">Phone status</string>
<!-- About phone screen, list item title. Takes the user to the screen for seeing and installing system updates. [CHAR LIMIT=40] -->
<string name="system_update_settings_list_item_title">System updates</string>
<!-- About phone screen, list item summary. Takes the user to the screen for seeing and installing system updates. [CHAR LIMIT=40] -->
<string name="system_update_settings_list_item_summary">""</string>
<!-- About phone screen, status item label [CHAR LIMIT=40] -->
<string name="firmware_version">Android version</string>
<!-- About phone screen, status item label [CHAR LIMIT=60] -->
<string name="security_patch">Android security patch level</string>
<!-- About phone screen, status item label [CHAR LIMIT=40] -->
<string name="model_number">Model number</string>
<!-- About phone screen, fcc equipment id label [CHAR LIMIT=40] -->
<string name="fcc_equipment_id">Equipment ID</string>
<!-- About phone screen, setting option name [CHAR LIMIT=40] -->
<string name="baseband_version">Baseband version</string>
<!-- About phone screen, setting option name [CHAR LIMIT=40] -->
<string name="kernel_version">Kernel version</string>
<!-- About phone screen, setting option name [CHAR LIMIT=40] -->
<string name="build_number">Build number</string>
<!-- About phone screen, setting option name [CHAR LIMIT=40] -->
<string name="selinux_status">SELinux status</string>
<!-- About phone screen, show when a value of some status item is unavailable. -->
<string name="device_info_not_available">Not available</string>
<!-- About phone screen, phone status screen title -->
<string name="device_status_activity_title">Status</string>
<!-- About phone screen, title of the item to go into the Phone status screen -->
<string name="device_status">Status</string>
<!-- About tablet screen, summary of the item that takes you to tablet status screen -->
<string name="device_status_summary" product="tablet">Status of the battery, network, and other information</string>
<!-- About phone screen, summary of the item to go into the phone status screen -->
<string name="device_status_summary" product="default">Phone number, signal, etc.</string>
<!-- Main settings screen item's title to go into the storage settings screen [CHAR LIMIT=25] -->
<string name="storage_settings" >Storage</string>
<!-- Main settings screen item's title to go into the storage & USB settings screen [CHAR LIMIT=25] -->
<string name="storage_usb_settings" >Storage &amp; USB</string>
<!-- Storage settings screen title -->
<string name="storage_settings_title">Storage settings</string>
<!-- [CHAR LIMIT=100] Main settings screen item's summary for the SD card and storage settings -->
<string name="storage_settings_summary" product="nosdcard">Unmount USB storage, view available storage</string>
<!-- [CHAR LIMIT=100] Main settings screen item's summary for the SD card and storage settings -->
<string name="storage_settings_summary" product="default">Unmount SD card, view available storage</string>
<!-- Do not translate. About phone, status item title -->
<string name="status_imei">IMEI</string>
<!-- Do not translate. About phone, status item title -->
<string name="status_imei_sv">IMEI SV</string>
<!-- About tablet, status item title. The Mobile Directory Number [CHAR LIMIT=30] -->
<string name="status_number" product="tablet">MDN</string>
<!-- About phone, status item title. The phone number of the current device [CHAR LIMIT=30] -->
<string name="status_number" product="default">My phone number</string>
<!-- About phone, status item title. The phone MIN number of the current device.-->
<string name="status_min_number">MIN</string>
<!-- About phone, status item title. The phone MSID number of the current device.-->
<string name="status_msid_number">MSID</string>
<!-- About phone, status item title. The phone PRL Version of the current device.-->
<string name="status_prl_version">PRL version</string>
<!-- About phone, status item title. The phone MEID number of the current LTE/CDMA device. [CHAR LIMIT=30] -->
<string name="status_meid_number">MEID</string>
<!-- About phone, status item title. The ICCID of the current LTE device. [CHAR LIMIT=30] -->
<string name="status_icc_id">ICCID</string>
<!-- About phone, status item title for the type of data phone network we're connected to, for example 3G or Edge or GPRS -->
<string name="status_network_type">Cellular network type</string>
<!-- About phone, status item title for the latest area info cell broadcast received (Brazil only). -->
<string name="status_latest_area_info">Operator info</string>
<!-- About phone, status item title. The status of data access. For example, the value may be "Connected" -->
<string name="status_data_state">Cellular network state</string>
<!-- About phone, status item title. The status of whether we have service. for example, the value may be "In service" -->
<string name="status_service_state">Service state</string>
<!-- About phone, status item title. The current cell tower signal strength -->
<string name="status_signal_strength">Signal strength</string>
<!-- About phone, status item title, The status for roaming. For example, the value might be "Not roaming" -->
<string name="status_roaming">Roaming</string>
<!-- About phone, status item title. The cell carrier that the user is connected to. -->
<string name="status_operator">Network</string>
<!-- About phone, status item title. The MAC address of the Wi-Fi network adapter. -->
<string name="status_wifi_mac_address">Wi\u2011Fi MAC address</string>
<!-- About phone, status item title. The bluetooth adapter's hardware address-->
<string name="status_bt_address">Bluetooth address</string>
<!-- About phone, status item title. The hardware serial number. [CHAR LIMIT=30]-->
<string name="status_serial_number">Serial number</string>
<!-- About phone, status item value if the actual value is not available. -->
<string name="status_unavailable">Unavailable</string>
<!-- About phone, status item title. How long the device has been running since its last reboot. -->
<string name="status_up_time">Up time</string>
<!-- About phone, status item title. How much time the device has had its main CPU awake. -->
<string name="status_awake_time">Awake time</string>
<!-- SD card & phone storage settings screen heading. This is displayed above items that pertain to the phone's internal storage -->
<string name="internal_memory">Internal storage</string>
<!-- SD card & phone storage settings screen heading. This is displayed above items that pertain to the SD card [CHAR LIMIT=30] -->
<string name="sd_memory" product="nosdcard">USB storage</string>
<!-- SD card & phone storage settings screen heading. This is displayed above items that pertain to the SD card -->
<string name="sd_memory" product="default">SD card</string>
<!-- SD card & phone storage settings title. The amount of free space for some storage partition. For example, this is listed under both the "Internal phone storage" section and the "SD card" section. -->
<string name="memory_available">Available</string>
<!-- SD card & phone storage settings title. The amount of free space for some storage partition when the volume is read-only. [CHAR LIMIT=64] -->
<string name="memory_available_read_only">Available (read-only)</string>
<!-- SD card & phone storage settings screen heading. The total amount of storage space for some storage partition. For example, this is listed under both the "Internal phone storage" section and the "SD card" section -->
<string name="memory_size">Total space</string>
<!-- SD card & phone storage settings summary. Displayed when the total memory usage is being calculated. Will be replaced with a number like "12.3 GB" when finished calucating. [CHAR LIMIT=30] -->
<string name="memory_calculating_size">Calculating\u2026</string>
<!-- SD card & phone storage settings title. Displayed as a title when showing the total usage of applications installed. Below it will be a number like "123.4 MB" indicating used storage. [CHAR LIMIT=50] -->
<string name="memory_apps_usage">Apps &amp; app data</string>
<!-- SD card & phone storage settings title. Displayed as a title when showing the total usage of media on the device. Below it will be a number like "123.4 MB" indicating used storage. [CHAR LIMIT=50] -->
<string name="memory_media_usage">Media</string>
<!-- SD card & phone storage settings title. Displayed as a title when showing the total usage of /sdcard/Download on the device. Below it will be a number like "123.4 MB" indicating used storage. [CHAR LIMIT=50] -->
<string name="memory_downloads_usage">Downloads</string>
<!-- SD card & phone storage settings title. Displayed as a title when showing the total usage of all pictures, videos in /sdcard/DCIM, /sdcard/Pictures folders on the device. Below it will be a number like "123.4 MB" indicating used storage. [CHAR LIMIT=50] -->
<string name="memory_dcim_usage">Pictures, videos</string>
<!-- SD card & phone storage settings title. Displayed as a title when showing the total usage of audio files in /sdcard on the device. Below it will be a number like "123.4 MB" indicating used storage. [CHAR LIMIT=50] -->
<string name="memory_music_usage">Audio (music, ringtones, podcasts, etc.)</string>
<!-- SD card & phone storage settings title. Displayed as a title when showing the total usage of misc files on the device. Below it will be a number like "123.4 MB" indicating used storage. [CHAR LIMIT=50] -->
<string name="memory_media_misc_usage">Other files</string>
<!-- Storage item representing all cached data on device. [CHAR LIMIT=48] -->
<string name="memory_media_cache_usage">Cached data</string>
<!-- SD card & phone storage settings item title that will result in the phone unmounting the SD card. This will be done before the user phyiscally removes the SD card from the phone. Kind of like the "Safely remove" on some operating systems. [CHAR LIMIT=25] -->
<string name="sd_eject" product="nosdcard">Unmount shared storage</string>
<!-- SD card & phone storage settings item title that will result in the phone unmounting the SD card. This will be done before the user phyiscally removes the SD card from the phone. Kind of like the "Safely remove" on some operating systems. -->
<string name="sd_eject" product="default">Unmount SD card</string>
<!-- SD card & phone storage settings item title that will result in the phone unmounting the SD card. This will be done before the user phyiscally removes the SD card from the phone. Kind of like the "Safely remove" on some operating systems. [CHAR LIMIT=30] -->
<string name="sd_eject_summary" product="nosdcard">Unmount the internal USB storage</string>
<!-- SD card & phone storage settings item title that will result in the phone unmounting the SD card. This will be done before the user phyiscally removes the SD card from the phone. Kind of like the "Safely remove" on some operating systems. -->
<string name="sd_eject_summary" product="default">Unmount the SD card so you can safely remove it</string>
<!-- SD card & phone storage settings item title for toggling PTP mode on and off. When PTP mode is on the device will appear on the USB bus as a PTP camera device instead of an MTP music player. -->
<!-- SD card & phone storage settings item summary that is displayed when no SD card is inserted. This version of the string can probably never come up on current hardware. [CHAR LIMIT=25] -->
<string name="sd_insert_summary" product="nosdcard">Insert USB storage for mounting</string>
<!-- SD card & phone storage settings item summary that is displayed when no SD card is inserted -->
<string name="sd_insert_summary" product="default">Insert an SD card for mounting</string>
<!-- Storage setting item that will mount USB storage if it unmounted. A user should never see this. [CHAR LIMIT=25] -->
<string name="sd_mount" product="nosdcard">Mount USB storage</string>
<!-- SD card & phone storage settings item title that will result in the phone mounting the SD card. -->
<string name="sd_mount" product="default">Mount SD card</string>
<!-- Subtext for Mount USB storage in Storage settings. User should never see this since we use automount. -->
<string name="sd_mount_summary" product="nosdcard"></string>
<!-- Subtext for Mount SD Card in Storage settings. User should never see this since we use automount. -->
<string name="sd_mount_summary" product="default"></string>
<!-- SD card & phone storage settings item title that will result in the phone formatting the USB storage. [CHAR LIMIT=25] -->
<string name="sd_format" product="nosdcard">Erase USB storage</string>
<!-- SD card & phone storage settings item title that will result in the phone formatting the SD card. [CHAR LIMIT=25] -->
<string name="sd_format" product="default">Erase SD card</string>
<!-- SD card & phone storage settings item title that will result in the phone unmounting the SD card. [CHAR LIMIT=80] -->
<string name="sd_format_summary" product="nosdcard">Erases all data on the internal USB storage, such as music and photos</string>
<!-- SD card & phone storage settings item title that will result in the phone unmounting the SD card. [CHAR LIMIT=80] -->
<string name="sd_format_summary" product="default">Erases all data on the SD card, such as music and photos</string>
<!-- SD card status when it is mounted as read only. Will be appended to size, starts with an unbreakable space -->
<!-- Title of dialog asking user to confirm before clearing all caches. [CHAR LIMIT=48] -->
<string name="memory_clear_cache_title">Clear cached data?</string>
<!-- Message of dialog asking user to confirm before clearing all caches. [CHAR LIMIT=48] -->
<string name="memory_clear_cache_message">This will clear cached data for all apps.</string>
<!-- SD card & phone storage settings item summary that will result in the phone connected to PC and MTP/PTP enabled. [CHAR LIMIT=80] -->
<string name="mtp_ptp_mode_summary">MTP or PTP function is active</string>
<!-- SD card eject confirmation dialog title [CHAR LIMIT=25] -->
<string name="dlg_confirm_unmount_title" product="nosdcard">Unmount USB storage?</string>
<!-- SD card eject confirmation dialog title -->
<string name="dlg_confirm_unmount_title" product="default">Unmount SD card?</string>
<!-- SD card eject confirmation dialog [CHAR LIMIT=NONE] -->
<string name="dlg_confirm_unmount_text" product="nosdcard">If you unmount the USB storage, some apps you are using will stop and may be unavailable until you remount the USB storage.</string>
<!-- SD card eject confirmation dialog -->
<string name="dlg_confirm_unmount_text" product="default">If you unmount the SD card, some apps you are using will stop and may be unavailable until you remount the SD card.</string>
<!-- SD card eject error dialog title [CHAR LIMIT=30] -->
<string name="dlg_error_unmount_title" product="nosdcard"></string>
<!-- SD card eject error dialog title -->
<string name="dlg_error_unmount_title" product="default"></string>
<!-- SD card eject error dialog text [CHAR LIMIT=NONE] -->
<string name="dlg_error_unmount_text" product="nosdcard">Couldn\u2019t unmount USB storage. Try again later.</string>
<!-- SD card eject error dialog text -->
<string name="dlg_error_unmount_text" product="default">Couldn\u2019t unmount SD card. Try again later.</string>
<!-- SD card unmount informative text [CHAR LIMIT=NONE] -->
<string name="unmount_inform_text" product="nosdcard">USB storage will be unmounted.</string>
<!-- SD card unmount informative text [CHAR LIMIT=NONE] -->
<string name="unmount_inform_text" product="default">SD card will be unmounted.</string>
<!-- SD card eject progress title -->
<string name="sd_ejecting_title">Unmounting</string>
<!-- SD card eject progress text -->
<string name="sd_ejecting_summary">Unmount in progress</string>