| /* |
| * Copyright (C) 2012 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| /* |
| * Communicate with secure elements that are attached to the NFC |
| * controller. |
| */ |
| #include <semaphore.h> |
| #include <errno.h> |
| #include "OverrideLog.h" |
| #include "SecureElement.h" |
| #include "config.h" |
| #include "PowerSwitch.h" |
| #include "HostAidRouter.h" |
| #include "JavaClassConstants.h" |
| |
| |
| /***************************************************************************** |
| ** |
| ** public variables |
| ** |
| *****************************************************************************/ |
| int gSEId = -1; // secure element ID to use in connectEE(), -1 means not set |
| int gGatePipe = -1; // gate id or static pipe id to use in connectEE(), -1 means not set |
| bool gUseStaticPipe = false; // if true, use gGatePipe as static pipe id. if false, use as gate id |
| |
| namespace android |
| { |
| extern void startRfDiscovery (bool isStart); |
| } |
| |
| ////////////////////////////////////////////// |
| ////////////////////////////////////////////// |
| |
| |
| SecureElement SecureElement::sSecElem; |
| const char* SecureElement::APP_NAME = "nfc_jni"; |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: SecureElement |
| ** |
| ** Description: Initialize member variables. |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| SecureElement::SecureElement () |
| : mActiveEeHandle (NFA_HANDLE_INVALID), |
| mDestinationGate (4), //loopback gate |
| mNfaHciHandle (NFA_HANDLE_INVALID), |
| mNativeData (NULL), |
| mIsInit (false), |
| mActualNumEe (0), |
| mNumEePresent(0), |
| mbNewEE (true), // by default we start w/thinking there are new EE |
| mNewPipeId (0), |
| mNewSourceGate (0), |
| mActiveSeOverride(0), |
| mCommandStatus (NFA_STATUS_OK), |
| mIsPiping (false), |
| mCurrentRouteSelection (NoRoute), |
| mActualResponseSize(0), |
| mUseOberthurWarmReset (false), |
| mActivatedInListenMode (false), |
| mOberthurWarmResetCommand (3), |
| mRfFieldIsOn(false) |
| { |
| memset (&mEeInfo, 0, sizeof(mEeInfo)); |
| memset (&mUiccInfo, 0, sizeof(mUiccInfo)); |
| memset (&mHciCfg, 0, sizeof(mHciCfg)); |
| memset (mResponseData, 0, sizeof(mResponseData)); |
| memset (mAidForEmptySelect, 0, sizeof(mAidForEmptySelect)); |
| memset (&mLastRfFieldToggle, 0, sizeof(mLastRfFieldToggle)); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: ~SecureElement |
| ** |
| ** Description: Release all resources. |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| SecureElement::~SecureElement () |
| { |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: getInstance |
| ** |
| ** Description: Get the SecureElement singleton object. |
| ** |
| ** Returns: SecureElement object. |
| ** |
| *******************************************************************************/ |
| SecureElement& SecureElement::getInstance() |
| { |
| return sSecElem; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: setActiveSeOverride |
| ** |
| ** Description: Specify which secure element to turn on. |
| ** activeSeOverride: ID of secure element |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| void SecureElement::setActiveSeOverride(UINT8 activeSeOverride) |
| { |
| ALOGD ("SecureElement::setActiveSeOverride, seid=0x%X", activeSeOverride); |
| mActiveSeOverride = activeSeOverride; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: initialize |
| ** |
| ** Description: Initialize all member variables. |
| ** native: Native data. |
| ** |
| ** Returns: True if ok. |
| ** |
| *******************************************************************************/ |
| bool SecureElement::initialize (nfc_jni_native_data* native) |
| { |
| static const char fn [] = "SecureElement::initialize"; |
| tNFA_STATUS nfaStat; |
| UINT8 xx = 0, yy = 0; |
| unsigned long num = 0; |
| |
| ALOGD ("%s: enter", fn); |
| |
| if (GetNumValue("NFA_HCI_DEFAULT_DEST_GATE", &num, sizeof(num))) |
| mDestinationGate = num; |
| ALOGD ("%s: Default destination gate: 0x%X", fn, mDestinationGate); |
| |
| // active SE, if not set active all SEs |
| if (GetNumValue("ACTIVE_SE", &num, sizeof(num))) |
| mActiveSeOverride = num; |
| ALOGD ("%s: Active SE override: 0x%X", fn, mActiveSeOverride); |
| |
| if (GetNumValue("OBERTHUR_WARM_RESET_COMMAND", &num, sizeof(num))) |
| { |
| mUseOberthurWarmReset = true; |
| mOberthurWarmResetCommand = (UINT8) num; |
| } |
| |
| mActiveEeHandle = NFA_HANDLE_INVALID; |
| mNfaHciHandle = NFA_HANDLE_INVALID; |
| |
| mNativeData = native; |
| mActualNumEe = MAX_NUM_EE; |
| mbNewEE = true; |
| mNewPipeId = 0; |
| mNewSourceGate = 0; |
| mCurrentRouteSelection = NoRoute; |
| memset (mEeInfo, 0, sizeof(mEeInfo)); |
| memset (&mUiccInfo, 0, sizeof(mUiccInfo)); |
| memset (&mHciCfg, 0, sizeof(mHciCfg)); |
| mUsedAids.clear (); |
| memset(mAidForEmptySelect, 0, sizeof(mAidForEmptySelect)); |
| |
| // Get Fresh EE info. |
| if (! getEeInfo()) |
| return (false); |
| |
| { |
| SyncEventGuard guard (mEeRegisterEvent); |
| ALOGD ("%s: try ee register", fn); |
| nfaStat = NFA_EeRegister (nfaEeCallback); |
| if (nfaStat != NFA_STATUS_OK) |
| { |
| ALOGE ("%s: fail ee register; error=0x%X", fn, nfaStat); |
| return (false); |
| } |
| mEeRegisterEvent.wait (); |
| } |
| |
| // If the controller has an HCI Network, register for that |
| for (xx = 0; xx < mActualNumEe; xx++) |
| { |
| if ((mEeInfo[xx].num_interface > 0) && (mEeInfo[xx].ee_interface[0] == NCI_NFCEE_INTERFACE_HCI_ACCESS) ) |
| { |
| ALOGD ("%s: Found HCI network, try hci register", fn); |
| |
| SyncEventGuard guard (mHciRegisterEvent); |
| |
| nfaStat = NFA_HciRegister (const_cast<char*>(APP_NAME), nfaHciCallback, TRUE); |
| if (nfaStat != NFA_STATUS_OK) |
| { |
| ALOGE ("%s: fail hci register; error=0x%X", fn, nfaStat); |
| return (false); |
| } |
| mHciRegisterEvent.wait(); |
| break; |
| } |
| } |
| |
| mRouteDataSet.initialize (); |
| mRouteDataSet.import (); //read XML file |
| HostAidRouter::getInstance().initialize (); |
| |
| GetStrValue(NAME_AID_FOR_EMPTY_SELECT, (char*)&mAidForEmptySelect[0], sizeof(mAidForEmptySelect)); |
| |
| mIsInit = true; |
| ALOGD ("%s: exit", fn); |
| return (true); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: finalize |
| ** |
| ** Description: Release all resources. |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| void SecureElement::finalize () |
| { |
| static const char fn [] = "SecureElement::finalize"; |
| ALOGD ("%s: enter", fn); |
| tNFA_STATUS nfaStat = NFA_STATUS_FAILED; |
| |
| NFA_EeDeregister (nfaEeCallback); |
| |
| if (mNfaHciHandle != NFA_HANDLE_INVALID) |
| NFA_HciDeregister (const_cast<char*>(APP_NAME)); |
| |
| mNfaHciHandle = NFA_HANDLE_INVALID; |
| mNativeData = NULL; |
| mIsInit = false; |
| mActualNumEe = 0; |
| mNumEePresent = 0; |
| mNewPipeId = 0; |
| mNewSourceGate = 0; |
| mIsPiping = false; |
| memset (mEeInfo, 0, sizeof(mEeInfo)); |
| memset (&mUiccInfo, 0, sizeof(mUiccInfo)); |
| |
| ALOGD ("%s: exit", fn); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: getEeInfo |
| ** |
| ** Description: Get latest information about execution environments from stack. |
| ** |
| ** Returns: True if at least 1 EE is available. |
| ** |
| *******************************************************************************/ |
| bool SecureElement::getEeInfo() |
| { |
| static const char fn [] = "SecureElement::getEeInfo"; |
| ALOGD ("%s: enter; mbNewEE=%d, mActualNumEe=%d", fn, mbNewEE, mActualNumEe); |
| tNFA_STATUS nfaStat = NFA_STATUS_FAILED; |
| UINT8 xx = 0, yy = 0; |
| |
| // If mbNewEE is true then there is new EE info. |
| if (mbNewEE) |
| { |
| mActualNumEe = MAX_NUM_EE; |
| |
| if ((nfaStat = NFA_EeGetInfo (&mActualNumEe, mEeInfo)) != NFA_STATUS_OK) |
| { |
| ALOGE ("%s: fail get info; error=0x%X", fn, nfaStat); |
| mActualNumEe = 0; |
| } |
| else |
| { |
| mbNewEE = false; |
| |
| ALOGD ("%s: num EEs discovered: %u", fn, mActualNumEe); |
| if (mActualNumEe != 0) |
| { |
| for (UINT8 xx = 0; xx < mActualNumEe; xx++) |
| { |
| if ((mEeInfo[xx].num_interface != 0) && (mEeInfo[xx].ee_interface[0] != NCI_NFCEE_INTERFACE_HCI_ACCESS) ) |
| mNumEePresent++; |
| |
| ALOGD ("%s: EE[%u] Handle: 0x%04x Status: %s Num I/f: %u: (0x%02x, 0x%02x) Num TLVs: %u", |
| fn, xx, mEeInfo[xx].ee_handle, eeStatusToString(mEeInfo[xx].ee_status), mEeInfo[xx].num_interface, |
| mEeInfo[xx].ee_interface[0], mEeInfo[xx].ee_interface[1], mEeInfo[xx].num_tlvs); |
| |
| for (yy = 0; yy < mEeInfo[xx].num_tlvs; yy++) |
| { |
| ALOGD ("%s: EE[%u] TLV[%u] Tag: 0x%02x Len: %u Values[]: 0x%02x 0x%02x 0x%02x ...", |
| fn, xx, yy, mEeInfo[xx].ee_tlv[yy].tag, mEeInfo[xx].ee_tlv[yy].len, mEeInfo[xx].ee_tlv[yy].info[0], |
| mEeInfo[xx].ee_tlv[yy].info[1], mEeInfo[xx].ee_tlv[yy].info[2]); |
| } |
| } |
| } |
| } |
| } |
| ALOGD ("%s: exit; mActualNumEe=%d, mNumEePresent=%d", fn, mActualNumEe,mNumEePresent); |
| return (mActualNumEe != 0); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function TimeDiff |
| ** |
| ** Description Computes time difference in milliseconds. |
| ** |
| ** Returns Time difference in milliseconds |
| ** |
| *******************************************************************************/ |
| static UINT32 TimeDiff(timespec start, timespec end) |
| { |
| end.tv_sec -= start.tv_sec; |
| end.tv_nsec -= start.tv_nsec; |
| |
| if (end.tv_nsec < 0) { |
| end.tv_nsec += 10e8; |
| end.tv_sec -=1; |
| } |
| |
| return (end.tv_sec * 1000) + (end.tv_nsec / 10e5); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function: isRfFieldOn |
| ** |
| ** Description: Can be used to determine if the SE is in an RF field |
| ** |
| ** Returns: True if the SE is activated in an RF field |
| ** |
| *******************************************************************************/ |
| bool SecureElement::isRfFieldOn() { |
| AutoMutex mutex(mMutex); |
| if (mRfFieldIsOn) { |
| return true; |
| } |
| struct timespec now; |
| int ret = clock_gettime(CLOCK_MONOTONIC, &now); |
| if (ret == -1) { |
| ALOGE("isRfFieldOn(): clock_gettime failed"); |
| return false; |
| } |
| if (TimeDiff(mLastRfFieldToggle, now) < 50) { |
| // If it was less than 50ms ago that RF field |
| // was turned off, still return ON. |
| return true; |
| } else { |
| return false; |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function: isActivatedInListenMode |
| ** |
| ** Description: Can be used to determine if the SE is activated in listen mode |
| ** |
| ** Returns: True if the SE is activated in listen mode |
| ** |
| *******************************************************************************/ |
| bool SecureElement::isActivatedInListenMode() { |
| return mActivatedInListenMode; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function: getListOfEeHandles |
| ** |
| ** Description: Get the list of handles of all execution environments. |
| ** e: Java Virtual Machine. |
| ** |
| ** Returns: List of handles of all execution environments. |
| ** |
| *******************************************************************************/ |
| jintArray SecureElement::getListOfEeHandles (JNIEnv* e) |
| { |
| static const char fn [] = "SecureElement::getListOfEeHandles"; |
| ALOGD ("%s: enter", fn); |
| if (mNumEePresent == 0) |
| return NULL; |
| jintArray list = NULL; |
| |
| if (!mIsInit) |
| { |
| ALOGE ("%s: not init", fn); |
| return (NULL); |
| } |
| |
| // Get Fresh EE info. |
| if (! getEeInfo()) |
| return (NULL); |
| |
| list = e->NewIntArray (mNumEePresent); //allocate array |
| jint jj = 0; |
| int cnt = 0; |
| for (int ii = 0; ii < mActualNumEe && cnt < mNumEePresent; ii++) |
| { |
| ALOGD ("%s: %u = 0x%X", fn, ii, mEeInfo[ii].ee_handle); |
| if ((mEeInfo[ii].num_interface == 0) || (mEeInfo[ii].ee_interface[0] == NCI_NFCEE_INTERFACE_HCI_ACCESS) ) |
| { |
| continue; |
| } |
| |
| jj = mEeInfo[ii].ee_handle & ~NFA_HANDLE_GROUP_EE; |
| e->SetIntArrayRegion (list, cnt++, 1, &jj); |
| } |
| //e->DeleteLocalRef (list); |
| |
| ALOGD("%s: exit", fn); |
| return list; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: activate |
| ** |
| ** Description: Turn on the secure element. |
| ** seID: ID of secure element; 0xF3 or 0xF4. |
| ** |
| ** Returns: True if ok. |
| ** |
| *******************************************************************************/ |
| bool SecureElement::activate (jint seID) |
| { |
| static const char fn [] = "SecureElement::activate"; |
| tNFA_STATUS nfaStat = NFA_STATUS_FAILED; |
| int numActivatedEe = 0; |
| |
| ALOGD ("%s: enter; seID=0x%X", fn, seID); |
| |
| if (!mIsInit) |
| { |
| ALOGE ("%s: not init", fn); |
| return false; |
| } |
| |
| if (mActiveEeHandle != NFA_HANDLE_INVALID) |
| { |
| ALOGD ("%s: already active", fn); |
| return true; |
| } |
| |
| // Get Fresh EE info if needed. |
| if (! getEeInfo()) |
| { |
| ALOGE ("%s: no EE info", fn); |
| return false; |
| } |
| |
| UINT16 overrideEeHandle = 0; |
| if (mActiveSeOverride) |
| overrideEeHandle = NFA_HANDLE_GROUP_EE | mActiveSeOverride; |
| |
| if (mRfFieldIsOn) { |
| ALOGE("%s: RF field indication still on, resetting", fn); |
| mRfFieldIsOn = false; |
| } |
| |
| ALOGD ("%s: override ee h=0x%X", fn, overrideEeHandle ); |
| //activate every discovered secure element |
| for (int index=0; index < mActualNumEe; index++) |
| { |
| tNFA_EE_INFO& eeItem = mEeInfo[index]; |
| |
| if ((eeItem.ee_handle == EE_HANDLE_0xF3) || (eeItem.ee_handle == EE_HANDLE_0xF4)) |
| { |
| if (overrideEeHandle && (overrideEeHandle != eeItem.ee_handle) ) |
| continue; // do not enable all SEs; only the override one |
| |
| if (eeItem.ee_status != NFC_NFCEE_STATUS_INACTIVE) |
| { |
| ALOGD ("%s: h=0x%X already activated", fn, eeItem.ee_handle); |
| numActivatedEe++; |
| continue; |
| } |
| |
| { |
| SyncEventGuard guard (mEeSetModeEvent); |
| ALOGD ("%s: set EE mode activate; h=0x%X", fn, eeItem.ee_handle); |
| if ((nfaStat = NFA_EeModeSet (eeItem.ee_handle, NFA_EE_MD_ACTIVATE)) == NFA_STATUS_OK) |
| { |
| mEeSetModeEvent.wait (); //wait for NFA_EE_MODE_SET_EVT |
| if (eeItem.ee_status == NFC_NFCEE_STATUS_ACTIVE) |
| numActivatedEe++; |
| } |
| else |
| ALOGE ("%s: NFA_EeModeSet failed; error=0x%X", fn, nfaStat); |
| } |
| } |
| } //for |
| |
| mActiveEeHandle = getDefaultEeHandle(); |
| if (mActiveEeHandle == NFA_HANDLE_INVALID) |
| ALOGE ("%s: ee handle not found", fn); |
| ALOGD ("%s: exit; active ee h=0x%X", fn, mActiveEeHandle); |
| return mActiveEeHandle != NFA_HANDLE_INVALID; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: deactivate |
| ** |
| ** Description: Turn off the secure element. |
| ** seID: ID of secure element; 0xF3 or 0xF4. |
| ** |
| ** Returns: True if ok. |
| ** |
| *******************************************************************************/ |
| bool SecureElement::deactivate (jint seID) |
| { |
| static const char fn [] = "SecureElement::deactivate"; |
| tNFA_STATUS nfaStat = NFA_STATUS_FAILED; |
| int numDeactivatedEe = 0; |
| bool retval = false; |
| |
| ALOGD ("%s: enter; seID=0x%X, mActiveEeHandle=0x%X", fn, seID, mActiveEeHandle); |
| |
| if (!mIsInit) |
| { |
| ALOGE ("%s: not init", fn); |
| goto TheEnd; |
| } |
| |
| //if the controller is routing to sec elems or piping, |
| //then the secure element cannot be deactivated |
| if ((mCurrentRouteSelection == SecElemRoute) || mIsPiping) |
| { |
| ALOGE ("%s: still busy", fn); |
| goto TheEnd; |
| } |
| |
| if (mActiveEeHandle == NFA_HANDLE_INVALID) |
| { |
| ALOGE ("%s: invalid EE handle", fn); |
| goto TheEnd; |
| } |
| |
| mActiveEeHandle = NFA_HANDLE_INVALID; |
| retval = true; |
| |
| TheEnd: |
| ALOGD ("%s: exit; ok=%u", fn, retval); |
| return retval; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: notifyTransactionListenersOfAid |
| ** |
| ** Description: Notify the NFC service about a transaction event from secure element. |
| ** aid: Buffer contains application ID. |
| ** aidLen: Length of application ID. |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| void SecureElement::notifyTransactionListenersOfAid (const UINT8* aidBuffer, UINT8 aidBufferLen) |
| { |
| static const char fn [] = "SecureElement::notifyTransactionListenersOfAid"; |
| ALOGD ("%s: enter; aid len=%u", fn, aidBufferLen); |
| |
| if (aidBufferLen == 0) |
| return; |
| |
| jobject tlvJavaArray = NULL; |
| JNIEnv* e = NULL; |
| UINT8* tlv = 0; |
| const UINT16 tlvMaxLen = aidBufferLen + 10; |
| UINT16 tlvActualLen = 0; |
| bool stat = false; |
| |
| mNativeData->vm->AttachCurrentThread (&e, NULL); |
| if (e == NULL) |
| { |
| ALOGE ("%s: jni env is null", fn); |
| return; |
| } |
| |
| tlv = new UINT8 [tlvMaxLen]; |
| if (tlv == NULL) |
| { |
| ALOGE ("%s: fail allocate tlv", fn); |
| goto TheEnd; |
| } |
| |
| memcpy (tlv, aidBuffer, aidBufferLen); |
| tlvActualLen = aidBufferLen; |
| |
| tlvJavaArray = e->NewByteArray (tlvActualLen); |
| if (tlvJavaArray == NULL) |
| { |
| ALOGE ("%s: fail allocate array", fn); |
| goto TheEnd; |
| } |
| |
| e->SetByteArrayRegion ((jbyteArray)tlvJavaArray, 0, tlvActualLen, (jbyte *)tlv); |
| if (e->ExceptionCheck()) |
| { |
| e->ExceptionClear(); |
| ALOGE ("%s: fail fill array", fn); |
| goto TheEnd; |
| } |
| |
| e->CallVoidMethod (mNativeData->manager, android::gCachedNfcManagerNotifyTransactionListeners, tlvJavaArray); |
| if (e->ExceptionCheck()) |
| { |
| e->ExceptionClear(); |
| ALOGE ("%s: fail notify", fn); |
| goto TheEnd; |
| } |
| |
| TheEnd: |
| if (tlvJavaArray) |
| e->DeleteLocalRef (tlvJavaArray); |
| mNativeData->vm->DetachCurrentThread (); |
| delete [] tlv; |
| ALOGD ("%s: exit", fn); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: connectEE |
| ** |
| ** Description: Connect to the execution environment. |
| ** |
| ** Returns: True if ok. |
| ** |
| *******************************************************************************/ |
| bool SecureElement::connectEE () |
| { |
| static const char fn [] = "SecureElement::connectEE"; |
| tNFA_STATUS nfaStat = NFA_STATUS_FAILED; |
| bool retVal = false; |
| UINT8 destHost = 0; |
| unsigned long num = 0; |
| char pipeConfName[40]; |
| tNFA_HANDLE eeHandle = mActiveEeHandle; |
| |
| ALOGD ("%s: enter, mActiveEeHandle: 0x%04x, SEID: 0x%x, pipe_gate_num=%d, use pipe=%d", |
| fn, mActiveEeHandle, gSEId, gGatePipe, gUseStaticPipe); |
| |
| if (!mIsInit) |
| { |
| ALOGE ("%s: not init", fn); |
| return (false); |
| } |
| |
| if (gSEId != -1) |
| { |
| eeHandle = gSEId | NFA_HANDLE_GROUP_EE; |
| ALOGD ("%s: Using SEID: 0x%x", fn, eeHandle ); |
| } |
| |
| if (eeHandle == NFA_HANDLE_INVALID) |
| { |
| ALOGE ("%s: invalid handle 0x%X", fn, eeHandle); |
| return (false); |
| } |
| |
| tNFA_EE_INFO *pEE = findEeByHandle (eeHandle); |
| |
| if (pEE == NULL) |
| { |
| ALOGE ("%s: Handle 0x%04x NOT FOUND !!", fn, eeHandle); |
| return (false); |
| } |
| |
| // Disable RF discovery completely while the DH is connected |
| android::startRfDiscovery(false); |
| |
| mNewSourceGate = 0; |
| |
| if (gGatePipe == -1) |
| { |
| // pipe/gate num was not specifed by app, get from config file |
| mNewPipeId = 0; |
| |
| // Construct the PIPE name based on the EE handle (e.g. NFA_HCI_STATIC_PIPE_ID_F3 for UICC0). |
| snprintf (pipeConfName, sizeof(pipeConfName), "NFA_HCI_STATIC_PIPE_ID_%02X", eeHandle & NFA_HANDLE_MASK); |
| |
| if (GetNumValue(pipeConfName, &num, sizeof(num)) && (num != 0)) |
| { |
| mNewPipeId = num; |
| ALOGD ("%s: Using static pipe id: 0x%X", __FUNCTION__, mNewPipeId); |
| } |
| else |
| { |
| ALOGD ("%s: Did not find value '%s' defined in the .conf", __FUNCTION__, pipeConfName); |
| } |
| } |
| else |
| { |
| if (gUseStaticPipe) |
| { |
| mNewPipeId = gGatePipe; |
| } |
| else |
| { |
| mNewPipeId = 0; |
| mDestinationGate= gGatePipe; |
| } |
| } |
| |
| // If the .conf file had a static pipe to use, just use it. |
| if (mNewPipeId != 0) |
| { |
| UINT8 host = (mNewPipeId == STATIC_PIPE_0x70) ? 0x02 : 0x03; |
| UINT8 gate = (mNewPipeId == STATIC_PIPE_0x70) ? 0xF0 : 0xF1; |
| nfaStat = NFA_HciAddStaticPipe(mNfaHciHandle, host, gate, mNewPipeId); |
| if (nfaStat != NFA_STATUS_OK) |
| { |
| ALOGE ("%s: fail create static pipe; error=0x%X", fn, nfaStat); |
| retVal = false; |
| goto TheEnd; |
| } |
| } |
| else |
| { |
| if ( (pEE->num_tlvs >= 1) && (pEE->ee_tlv[0].tag == NFA_EE_TAG_HCI_HOST_ID) ) |
| destHost = pEE->ee_tlv[0].info[0]; |
| else |
| destHost = 2; |
| |
| // Get a list of existing gates and pipes |
| { |
| ALOGD ("%s: get gate, pipe list", fn); |
| SyncEventGuard guard (mPipeListEvent); |
| nfaStat = NFA_HciGetGateAndPipeList (mNfaHciHandle); |
| if (nfaStat == NFA_STATUS_OK) |
| { |
| mPipeListEvent.wait(); |
| if (mHciCfg.status == NFA_STATUS_OK) |
| { |
| for (UINT8 xx = 0; xx < mHciCfg.num_pipes; xx++) |
| { |
| if ( (mHciCfg.pipe[xx].dest_host == destHost) |
| && (mHciCfg.pipe[xx].dest_gate == mDestinationGate) ) |
| { |
| mNewSourceGate = mHciCfg.pipe[xx].local_gate; |
| mNewPipeId = mHciCfg.pipe[xx].pipe_id; |
| |
| ALOGD ("%s: found configured gate: 0x%02x pipe: 0x%02x", fn, mNewSourceGate, mNewPipeId); |
| break; |
| } |
| } |
| } |
| } |
| } |
| |
| if (mNewSourceGate == 0) |
| { |
| ALOGD ("%s: allocate gate", fn); |
| //allocate a source gate and store in mNewSourceGate |
| SyncEventGuard guard (mAllocateGateEvent); |
| if ((nfaStat = NFA_HciAllocGate (mNfaHciHandle)) != NFA_STATUS_OK) |
| { |
| ALOGE ("%s: fail allocate source gate; error=0x%X", fn, nfaStat); |
| goto TheEnd; |
| } |
| mAllocateGateEvent.wait (); |
| if (mCommandStatus != NFA_STATUS_OK) |
| goto TheEnd; |
| } |
| |
| if (mNewPipeId == 0) |
| { |
| ALOGD ("%s: create pipe", fn); |
| SyncEventGuard guard (mCreatePipeEvent); |
| nfaStat = NFA_HciCreatePipe (mNfaHciHandle, mNewSourceGate, destHost, mDestinationGate); |
| if (nfaStat != NFA_STATUS_OK) |
| { |
| ALOGE ("%s: fail create pipe; error=0x%X", fn, nfaStat); |
| goto TheEnd; |
| } |
| mCreatePipeEvent.wait (); |
| if (mCommandStatus != NFA_STATUS_OK) |
| goto TheEnd; |
| } |
| |
| { |
| ALOGD ("%s: open pipe", fn); |
| SyncEventGuard guard (mPipeOpenedEvent); |
| nfaStat = NFA_HciOpenPipe (mNfaHciHandle, mNewPipeId); |
| if (nfaStat != NFA_STATUS_OK) |
| { |
| ALOGE ("%s: fail open pipe; error=0x%X", fn, nfaStat); |
| goto TheEnd; |
| } |
| mPipeOpenedEvent.wait (); |
| if (mCommandStatus != NFA_STATUS_OK) |
| goto TheEnd; |
| } |
| } |
| |
| retVal = true; |
| |
| TheEnd: |
| mIsPiping = retVal; |
| if (!retVal) |
| { |
| // if open failed we need to de-allocate the gate |
| disconnectEE(0); |
| } |
| |
| ALOGD ("%s: exit; ok=%u", fn, retVal); |
| return retVal; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: disconnectEE |
| ** |
| ** Description: Disconnect from the execution environment. |
| ** seID: ID of secure element. |
| ** |
| ** Returns: True if ok. |
| ** |
| *******************************************************************************/ |
| bool SecureElement::disconnectEE (jint seID) |
| { |
| static const char fn [] = "SecureElement::disconnectEE"; |
| tNFA_STATUS nfaStat = NFA_STATUS_FAILED; |
| tNFA_HANDLE eeHandle = seID; |
| |
| ALOGD("%s: seID=0x%X; handle=0x%04x", fn, seID, eeHandle); |
| |
| if (mUseOberthurWarmReset) |
| { |
| //send warm-reset command to Oberthur secure element which deselects the applet; |
| //this is an Oberthur-specific command; |
| ALOGD("%s: try warm-reset on pipe id 0x%X; cmd=0x%X", fn, mNewPipeId, mOberthurWarmResetCommand); |
| SyncEventGuard guard (mRegistryEvent); |
| nfaStat = NFA_HciSetRegistry (mNfaHciHandle, mNewPipeId, |
| 1, 1, &mOberthurWarmResetCommand); |
| if (nfaStat == NFA_STATUS_OK) |
| { |
| mRegistryEvent.wait (); |
| ALOGD("%s: completed warm-reset on pipe 0x%X", fn, mNewPipeId); |
| } |
| } |
| |
| if (mNewSourceGate) |
| { |
| SyncEventGuard guard (mDeallocateGateEvent); |
| if ((nfaStat = NFA_HciDeallocGate (mNfaHciHandle, mNewSourceGate)) == NFA_STATUS_OK) |
| mDeallocateGateEvent.wait (); |
| else |
| ALOGE ("%s: fail dealloc gate; error=0x%X", fn, nfaStat); |
| } |
| mIsPiping = false; |
| // Re-enable RF discovery |
| // Note that it only effactuates the current configuration, |
| // so if polling/listening were configured OFF (forex because |
| // the screen was off), they will stay OFF with this call. |
| android::startRfDiscovery(true); |
| return true; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: transceive |
| ** |
| ** Description: Send data to the secure element; read it's response. |
| ** xmitBuffer: Data to transmit. |
| ** xmitBufferSize: Length of data. |
| ** recvBuffer: Buffer to receive response. |
| ** recvBufferMaxSize: Maximum size of buffer. |
| ** recvBufferActualSize: Actual length of response. |
| ** timeoutMillisec: timeout in millisecond. |
| ** |
| ** Returns: True if ok. |
| ** |
| *******************************************************************************/ |
| bool SecureElement::transceive (UINT8* xmitBuffer, INT32 xmitBufferSize, UINT8* recvBuffer, |
| INT32 recvBufferMaxSize, INT32& recvBufferActualSize, INT32 timeoutMillisec) |
| { |
| static const char fn [] = "SecureElement::transceive"; |
| tNFA_STATUS nfaStat = NFA_STATUS_FAILED; |
| bool isSuccess = false; |
| bool waitOk = false; |
| UINT8 newSelectCmd[NCI_MAX_AID_LEN + 10]; |
| |
| ALOGD ("%s: enter; xmitBufferSize=%ld; recvBufferMaxSize=%ld; timeout=%ld", fn, xmitBufferSize, recvBufferMaxSize, timeoutMillisec); |
| |
| // Check if we need to replace an "empty" SELECT command. |
| // 1. Has there been a AID configured, and |
| // 2. Is that AID a valid length (i.e 16 bytes max), and |
| // 3. Is the APDU at least 4 bytes (for header), and |
| // 4. Is INS == 0xA4 (SELECT command), and |
| // 5. Is P1 == 0x04 (SELECT by AID), and |
| // 6. Is the APDU len 4 or 5 bytes. |
| // |
| // Note, the length of the configured AID is in the first |
| // byte, and AID starts from the 2nd byte. |
| if (mAidForEmptySelect[0] // 1 |
| && (mAidForEmptySelect[0] <= NCI_MAX_AID_LEN) // 2 |
| && (xmitBufferSize >= 4) // 3 |
| && (xmitBuffer[1] == 0xA4) // 4 |
| && (xmitBuffer[2] == 0x04) // 5 |
| && (xmitBufferSize <= 5)) // 6 |
| { |
| UINT8 idx = 0; |
| |
| // Copy APDU command header from the input buffer. |
| memcpy(&newSelectCmd[0], &xmitBuffer[0], 4); |
| idx = 4; |
| |
| // Set the Lc value to length of the new AID |
| newSelectCmd[idx++] = mAidForEmptySelect[0]; |
| |
| // Copy the AID |
| memcpy(&newSelectCmd[idx], &mAidForEmptySelect[1], mAidForEmptySelect[0]); |
| idx += mAidForEmptySelect[0]; |
| |
| // If there is an Le (5th byte of APDU), add it to the end. |
| if (xmitBufferSize == 5) |
| newSelectCmd[idx++] = xmitBuffer[4]; |
| |
| // Point to the new APDU |
| xmitBuffer = &newSelectCmd[0]; |
| xmitBufferSize = idx; |
| |
| ALOGD ("%s: Empty AID SELECT cmd detected, substituting AID from config file, new length=%d", fn, idx); |
| } |
| |
| { |
| SyncEventGuard guard (mTransceiveEvent); |
| mActualResponseSize = 0; |
| memset (mResponseData, 0, sizeof(mResponseData)); |
| if ((mNewPipeId == STATIC_PIPE_0x70) || (mNewPipeId == STATIC_PIPE_0x71)) |
| nfaStat = NFA_HciSendEvent (mNfaHciHandle, mNewPipeId, EVT_SEND_DATA, xmitBufferSize, xmitBuffer, sizeof(mResponseData), mResponseData, 0); |
| else |
| nfaStat = NFA_HciSendEvent (mNfaHciHandle, mNewPipeId, NFA_HCI_EVT_POST_DATA, xmitBufferSize, xmitBuffer, sizeof(mResponseData), mResponseData, 0); |
| |
| if (nfaStat == NFA_STATUS_OK) |
| { |
| waitOk = mTransceiveEvent.wait (timeoutMillisec); |
| if (waitOk == false) //timeout occurs |
| { |
| ALOGE ("%s: wait response timeout", fn); |
| goto TheEnd; |
| } |
| } |
| else |
| { |
| ALOGE ("%s: fail send data; error=0x%X", fn, nfaStat); |
| goto TheEnd; |
| } |
| } |
| |
| if (mActualResponseSize > recvBufferMaxSize) |
| recvBufferActualSize = recvBufferMaxSize; |
| else |
| recvBufferActualSize = mActualResponseSize; |
| |
| memcpy (recvBuffer, mResponseData, recvBufferActualSize); |
| isSuccess = true; |
| |
| TheEnd: |
| ALOGD ("%s: exit; isSuccess: %d; recvBufferActualSize: %ld", fn, isSuccess, recvBufferActualSize); |
| return (isSuccess); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: notifyListenModeState |
| ** |
| ** Description: Notify the NFC service about whether the SE was activated |
| ** in listen mode. |
| ** isActive: Whether the secure element is activated. |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| void SecureElement::notifyListenModeState (bool isActivated) { |
| static const char fn [] = "SecureElement::notifyListenMode"; |
| JNIEnv *e = NULL; |
| |
| ALOGD ("%s: enter; listen mode active=%u", fn, isActivated); |
| mNativeData->vm->AttachCurrentThread (&e, NULL); |
| |
| if (e == NULL) |
| { |
| ALOGE ("%s: jni env is null", fn); |
| return; |
| } |
| |
| mActivatedInListenMode = isActivated; |
| if (isActivated) { |
| e->CallVoidMethod (mNativeData->manager, android::gCachedNfcManagerNotifySeListenActivated); |
| } |
| else { |
| e->CallVoidMethod (mNativeData->manager, android::gCachedNfcManagerNotifySeListenDeactivated); |
| } |
| |
| if (e->ExceptionCheck()) |
| { |
| e->ExceptionClear(); |
| ALOGE ("%s: fail notify", fn); |
| } |
| |
| mNativeData->vm->DetachCurrentThread (); |
| ALOGD ("%s: exit", fn); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function: notifyRfFieldEvent |
| ** |
| ** Description: Notify the NFC service about RF field events from the stack. |
| ** isActive: Whether any secure element is activated. |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| void SecureElement::notifyRfFieldEvent (bool isActive) |
| { |
| static const char fn [] = "SecureElement::notifyRfFieldEvent"; |
| JNIEnv *e = NULL; |
| |
| ALOGD ("%s: enter; is active=%u", fn, isActive); |
| mNativeData->vm->AttachCurrentThread (&e, NULL); |
| |
| if (e == NULL) |
| { |
| ALOGE ("%s: jni env is null", fn); |
| return; |
| } |
| |
| mMutex.lock(); |
| int ret = clock_gettime (CLOCK_MONOTONIC, &mLastRfFieldToggle); |
| if (ret == -1) { |
| ALOGE("%s: clock_gettime failed", fn); |
| // There is no good choice here... |
| } |
| if (isActive) { |
| mRfFieldIsOn = true; |
| e->CallVoidMethod (mNativeData->manager, android::gCachedNfcManagerNotifySeFieldActivated); |
| } |
| else { |
| mRfFieldIsOn = false; |
| e->CallVoidMethod (mNativeData->manager, android::gCachedNfcManagerNotifySeFieldDeactivated); |
| } |
| mMutex.unlock(); |
| |
| if (e->ExceptionCheck()) |
| { |
| e->ExceptionClear(); |
| ALOGE ("%s: fail notify", fn); |
| } |
| mNativeData->vm->DetachCurrentThread (); |
| ALOGD ("%s: exit", fn); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: storeUiccInfo |
| ** |
| ** Description: Store a copy of the execution environment information from the stack. |
| ** info: execution environment information. |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| void SecureElement::storeUiccInfo (tNFA_EE_DISCOVER_REQ& info) |
| { |
| static const char fn [] = "SecureElement::storeUiccInfo"; |
| ALOGD ("%s: Status: %u Num EE: %u", fn, info.status, info.num_ee); |
| |
| SyncEventGuard guard (mUiccInfoEvent); |
| memcpy (&mUiccInfo, &info, sizeof(mUiccInfo)); |
| for (UINT8 xx = 0; xx < info.num_ee; xx++) |
| { |
| //for each technology (A, B, F, B'), print the bit field that shows |
| //what protocol(s) is support by that technology |
| ALOGD ("%s EE[%u] Handle: 0x%04x techA: 0x%02x techB: 0x%02x techF: 0x%02x techBprime: 0x%02x", |
| fn, xx, info.ee_disc_info[xx].ee_handle, |
| info.ee_disc_info[xx].la_protocol, |
| info.ee_disc_info[xx].lb_protocol, |
| info.ee_disc_info[xx].lf_protocol, |
| info.ee_disc_info[xx].lbp_protocol); |
| } |
| mUiccInfoEvent.notifyOne (); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: getUiccId |
| ** |
| ** Description: Get the ID of the secure element. |
| ** eeHandle: Handle to the secure element. |
| ** uid: Array to receive the ID. |
| ** |
| ** Returns: True if ok. |
| ** |
| *******************************************************************************/ |
| bool SecureElement::getUiccId (tNFA_HANDLE eeHandle, jbyteArray& uid) |
| { |
| static const char fn [] = "SecureElement::getUiccId"; |
| ALOGD ("%s: ee h=0x%X", fn, eeHandle); |
| bool retval = false; |
| JNIEnv* e = NULL; |
| |
| mNativeData->vm->AttachCurrentThread (&e, NULL); |
| if (e == NULL) |
| { |
| ALOGE ("%s: jni env is null", fn); |
| return false; |
| } |
| |
| findUiccByHandle (eeHandle); |
| //cannot get UID from the stack; nothing to do |
| |
| TheEnd: |
| mNativeData->vm->DetachCurrentThread (); |
| ALOGD ("%s: exit; ret=%u", fn, retval); |
| return retval; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: getTechnologyList |
| ** |
| ** Description: Get all the technologies supported by a secure element. |
| ** eeHandle: Handle of secure element. |
| ** techList: List to receive the technologies. |
| ** |
| ** Returns: True if ok. |
| ** |
| *******************************************************************************/ |
| bool SecureElement::getTechnologyList (tNFA_HANDLE eeHandle, jintArray& techList) |
| { |
| static const char fn [] = "SecureElement::getTechnologyList"; |
| ALOGD ("%s: ee h=0x%X", fn, eeHandle); |
| bool retval = false; |
| JNIEnv* e = NULL; |
| jint theList = 0; |
| |
| mNativeData->vm->AttachCurrentThread (&e, NULL); |
| if (e == NULL) |
| { |
| ALOGE ("%s: jni env is null", fn); |
| return false; |
| } |
| |
| tNFA_EE_DISCOVER_INFO *pUICC = findUiccByHandle (eeHandle); |
| |
| if (pUICC->la_protocol != 0) |
| theList = TARGET_TYPE_ISO14443_3A; |
| else if (pUICC->lb_protocol != 0) |
| theList = TARGET_TYPE_ISO14443_3B; |
| else if (pUICC->lf_protocol != 0) |
| theList = TARGET_TYPE_FELICA; |
| else if (pUICC->lbp_protocol != 0) |
| theList = TARGET_TYPE_ISO14443_3B; |
| else |
| theList = TARGET_TYPE_UNKNOWN; |
| |
| TheEnd: |
| mNativeData->vm->DetachCurrentThread (); |
| ALOGD ("%s: exit; ret=%u", fn, retval); |
| return retval; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: adjustRoutes |
| ** |
| ** Description: Adjust routes in the controller's listen-mode routing table. |
| ** selection: which set of routes to configure the controller. |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| void SecureElement::adjustRoutes (RouteSelection selection) |
| { |
| static const char fn [] = "SecureElement::adjustRoutes"; |
| ALOGD ("%s: enter; selection=%u", fn, selection); |
| tNFA_STATUS nfaStat = NFA_STATUS_FAILED; |
| RouteDataSet::Database* db = mRouteDataSet.getDatabase (RouteDataSet::DefaultRouteDatabase); |
| |
| if (selection == SecElemRoute) |
| db = mRouteDataSet.getDatabase (RouteDataSet::SecElemRouteDatabase); |
| |
| mCurrentRouteSelection = selection; |
| adjustProtocolRoutes (db, selection); |
| adjustTechnologyRoutes (db, selection); |
| HostAidRouter::getInstance ().deleteAllRoutes (); //stop all AID routes to host |
| |
| if (db->empty()) |
| { |
| ALOGD ("%s: no route configuration", fn); |
| goto TheEnd; |
| } |
| |
| |
| TheEnd: |
| NFA_EeUpdateNow (); //apply new routes now |
| ALOGD ("%s: exit", fn); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: applyRoutes |
| ** |
| ** Description: Read route data from file and apply them again. |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| void SecureElement::applyRoutes () |
| { |
| static const char fn [] = "SecureElement::applyRoutes"; |
| ALOGD ("%s: enter", fn); |
| if (mCurrentRouteSelection != NoRoute) |
| { |
| mRouteDataSet.import (); //read XML file |
| adjustRoutes (mCurrentRouteSelection); |
| } |
| ALOGD ("%s: exit", fn); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: adjustProtocolRoutes |
| ** |
| ** Description: Adjust default routing based on protocol in NFC listen mode. |
| ** isRouteToEe: Whether routing to EE (true) or host (false). |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| void SecureElement::adjustProtocolRoutes (RouteDataSet::Database* db, RouteSelection routeSelection) |
| { |
| static const char fn [] = "SecureElement::adjustProtocolRoutes"; |
| ALOGD ("%s: enter", fn); |
| tNFA_STATUS nfaStat = NFA_STATUS_FAILED; |
| const tNFA_PROTOCOL_MASK protoMask = NFA_PROTOCOL_MASK_ISO_DEP; |
| |
| /////////////////////// |
| // delete route to host |
| /////////////////////// |
| { |
| ALOGD ("%s: delete route to host", fn); |
| SyncEventGuard guard (mRoutingEvent); |
| if ((nfaStat = NFA_EeSetDefaultProtoRouting (NFA_EE_HANDLE_DH, 0, 0, 0)) == NFA_STATUS_OK) |
| mRoutingEvent.wait (); |
| else |
| ALOGE ("%s: fail delete route to host; error=0x%X", fn, nfaStat); |
| } |
| |
| /////////////////////// |
| // delete route to every sec elem |
| /////////////////////// |
| for (int i=0; i < mActualNumEe; i++) |
| { |
| if ((mEeInfo[i].num_interface != 0) && |
| (mEeInfo[i].ee_interface[0] != NFC_NFCEE_INTERFACE_HCI_ACCESS) && |
| (mEeInfo[i].ee_status == NFA_EE_STATUS_ACTIVE)) |
| { |
| ALOGD ("%s: delete route to EE h=0x%X", fn, mEeInfo[i].ee_handle); |
| SyncEventGuard guard (mRoutingEvent); |
| if ((nfaStat = NFA_EeSetDefaultProtoRouting (mEeInfo[i].ee_handle, 0, 0, 0)) == NFA_STATUS_OK) |
| mRoutingEvent.wait (); |
| else |
| ALOGE ("%s: fail delete route to EE; error=0x%X", fn, nfaStat); |
| } |
| } |
| |
| ////////////////////// |
| // configure route for every discovered sec elem |
| ////////////////////// |
| for (int i=0; i < mActualNumEe; i++) |
| { |
| //if sec elem is active |
| if ((mEeInfo[i].num_interface != 0) && |
| (mEeInfo[i].ee_interface[0] != NFC_NFCEE_INTERFACE_HCI_ACCESS) && |
| (mEeInfo[i].ee_status == NFA_EE_STATUS_ACTIVE)) |
| { |
| tNFA_PROTOCOL_MASK protocolsSwitchOn = 0; //all protocols that are active at full power |
| tNFA_PROTOCOL_MASK protocolsSwitchOff = 0; //all protocols that are active when phone is turned off |
| tNFA_PROTOCOL_MASK protocolsBatteryOff = 0; //all protocols that are active when there is no power |
| |
| //for every route in XML, look for protocol route; |
| //collect every protocol according to it's desired power mode |
| for (RouteDataSet::Database::iterator iter = db->begin(); iter != db->end(); iter++) |
| { |
| RouteData* routeData = *iter; |
| RouteDataForProtocol* route = NULL; |
| if (routeData->mRouteType != RouteData::ProtocolRoute) |
| continue; //skip other kinds of routing data |
| route = (RouteDataForProtocol*) (*iter); |
| if (route->mNfaEeHandle == mEeInfo[i].ee_handle) |
| { |
| if (route->mSwitchOn) |
| protocolsSwitchOn |= route->mProtocol; |
| if (route->mSwitchOff) |
| protocolsSwitchOff |= route->mProtocol; |
| if (route->mBatteryOff) |
| protocolsBatteryOff |= route->mProtocol; |
| } |
| } |
| |
| if (protocolsSwitchOn | protocolsSwitchOff | protocolsBatteryOff) |
| { |
| ALOGD ("%s: route to EE h=0x%X", fn, mEeInfo[i].ee_handle); |
| SyncEventGuard guard (mRoutingEvent); |
| nfaStat = NFA_EeSetDefaultProtoRouting (mEeInfo[i].ee_handle, |
| protocolsSwitchOn, protocolsSwitchOff, protocolsBatteryOff); |
| if (nfaStat == NFA_STATUS_OK) |
| mRoutingEvent.wait (); |
| else |
| ALOGE ("%s: fail route to EE; error=0x%X", fn, nfaStat); |
| } |
| } //if sec elem is active |
| } //for every discovered sec elem |
| |
| ////////////////////// |
| // configure route to host |
| ////////////////////// |
| { |
| tNFA_PROTOCOL_MASK protocolsSwitchOn = 0; //all protocols that are active at full power |
| tNFA_PROTOCOL_MASK protocolsSwitchOff = 0; //all protocols that are active when phone is turned off |
| tNFA_PROTOCOL_MASK protocolsBatteryOff = 0; //all protocols that are active when there is no power |
| |
| //for every route in XML, look for protocol route; |
| //collect every protocol according to it's desired power mode |
| for (RouteDataSet::Database::iterator iter = db->begin(); iter != db->end(); iter++) |
| { |
| RouteData* routeData = *iter; |
| RouteDataForProtocol* route = NULL; |
| if (routeData->mRouteType != RouteData::ProtocolRoute) |
| continue; //skip other kinds of routing data |
| route = (RouteDataForProtocol*) (*iter); |
| if (route->mNfaEeHandle == NFA_EE_HANDLE_DH) |
| { |
| if (route->mSwitchOn) |
| protocolsSwitchOn |= route->mProtocol; |
| if (route->mSwitchOff) |
| protocolsSwitchOff |= route->mProtocol; |
| if (route->mBatteryOff) |
| protocolsBatteryOff |= route->mProtocol; |
| } |
| } |
| |
| if (protocolsSwitchOn | protocolsSwitchOff | protocolsBatteryOff) |
| { |
| ALOGD ("%s: route to EE h=0x%X", fn, NFA_EE_HANDLE_DH); |
| SyncEventGuard guard (mRoutingEvent); |
| nfaStat = NFA_EeSetDefaultProtoRouting (NFA_EE_HANDLE_DH, |
| protocolsSwitchOn, protocolsSwitchOff, protocolsBatteryOff); |
| if (nfaStat == NFA_STATUS_OK) |
| mRoutingEvent.wait (); |
| else |
| ALOGE ("%s: fail route to EE; error=0x%X", fn, nfaStat); |
| } |
| } |
| |
| ////////////////////// |
| // if route database is empty, setup a default route |
| ////////////////////// |
| if (db->empty()) |
| { |
| tNFA_HANDLE eeHandle = NFA_EE_HANDLE_DH; |
| if (routeSelection == SecElemRoute) |
| eeHandle = mActiveEeHandle; |
| ALOGD ("%s: route to default EE h=0x%X", fn, eeHandle); |
| SyncEventGuard guard (mRoutingEvent); |
| nfaStat = NFA_EeSetDefaultProtoRouting (eeHandle, protoMask, 0, 0); |
| if (nfaStat == NFA_STATUS_OK) |
| mRoutingEvent.wait (); |
| else |
| ALOGE ("%s: fail route to EE; error=0x%X", fn, nfaStat); |
| } |
| ALOGD ("%s: exit", fn); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: adjustTechnologyRoutes |
| ** |
| ** Description: Adjust default routing based on technology in NFC listen mode. |
| ** isRouteToEe: Whether routing to EE (true) or host (false). |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| void SecureElement::adjustTechnologyRoutes (RouteDataSet::Database* db, RouteSelection routeSelection) |
| { |
| static const char fn [] = "SecureElement::adjustTechnologyRoutes"; |
| ALOGD ("%s: enter", fn); |
| tNFA_STATUS nfaStat = NFA_STATUS_FAILED; |
| const tNFA_TECHNOLOGY_MASK techMask = NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B; |
| |
| /////////////////////// |
| // delete route to host |
| /////////////////////// |
| { |
| ALOGD ("%s: delete route to host", fn); |
| SyncEventGuard guard (mRoutingEvent); |
| if ((nfaStat = NFA_EeSetDefaultTechRouting (NFA_EE_HANDLE_DH, 0, 0, 0)) == NFA_STATUS_OK) |
| mRoutingEvent.wait (); |
| else |
| ALOGE ("%s: fail delete route to host; error=0x%X", fn, nfaStat); |
| } |
| |
| /////////////////////// |
| // delete route to every sec elem |
| /////////////////////// |
| for (int i=0; i < mActualNumEe; i++) |
| { |
| if ((mEeInfo[i].num_interface != 0) && |
| (mEeInfo[i].ee_interface[0] != NFC_NFCEE_INTERFACE_HCI_ACCESS) && |
| (mEeInfo[i].ee_status == NFA_EE_STATUS_ACTIVE)) |
| { |
| ALOGD ("%s: delete route to EE h=0x%X", fn, mEeInfo[i].ee_handle); |
| SyncEventGuard guard (mRoutingEvent); |
| if ((nfaStat = NFA_EeSetDefaultTechRouting (mEeInfo[i].ee_handle, 0, 0, 0)) == NFA_STATUS_OK) |
| mRoutingEvent.wait (); |
| else |
| ALOGE ("%s: fail delete route to EE; error=0x%X", fn, nfaStat); |
| } |
| } |
| |
| ////////////////////// |
| // configure route for every discovered sec elem |
| ////////////////////// |
| for (int i=0; i < mActualNumEe; i++) |
| { |
| //if sec elem is active |
| if ((mEeInfo[i].num_interface != 0) && |
| (mEeInfo[i].ee_interface[0] != NFC_NFCEE_INTERFACE_HCI_ACCESS) && |
| (mEeInfo[i].ee_status == NFA_EE_STATUS_ACTIVE)) |
| { |
| tNFA_TECHNOLOGY_MASK techsSwitchOn = 0; //all techs that are active at full power |
| tNFA_TECHNOLOGY_MASK techsSwitchOff = 0; //all techs that are active when phone is turned off |
| tNFA_TECHNOLOGY_MASK techsBatteryOff = 0; //all techs that are active when there is no power |
| |
| //for every route in XML, look for tech route; |
| //collect every tech according to it's desired power mode |
| for (RouteDataSet::Database::iterator iter = db->begin(); iter != db->end(); iter++) |
| { |
| RouteData* routeData = *iter; |
| RouteDataForTechnology* route = NULL; |
| if (routeData->mRouteType != RouteData::TechnologyRoute) |
| continue; //skip other kinds of routing data |
| route = (RouteDataForTechnology*) (*iter); |
| if (route->mNfaEeHandle == mEeInfo[i].ee_handle) |
| { |
| if (route->mSwitchOn) |
| techsSwitchOn |= route->mTechnology; |
| if (route->mSwitchOff) |
| techsSwitchOff |= route->mTechnology; |
| if (route->mBatteryOff) |
| techsBatteryOff |= route->mTechnology; |
| } |
| } |
| |
| if (techsSwitchOn | techsSwitchOff | techsBatteryOff) |
| { |
| ALOGD ("%s: route to EE h=0x%X", fn, mEeInfo[i].ee_handle); |
| SyncEventGuard guard (mRoutingEvent); |
| nfaStat = NFA_EeSetDefaultTechRouting (mEeInfo[i].ee_handle, |
| techsSwitchOn, techsSwitchOff, techsBatteryOff); |
| if (nfaStat == NFA_STATUS_OK) |
| mRoutingEvent.wait (); |
| else |
| ALOGE ("%s: fail route to EE; error=0x%X", fn, nfaStat); |
| } |
| } //if sec elem is active |
| } //for every discovered sec elem |
| |
| ////////////////////// |
| // configure route to host |
| ////////////////////// |
| { |
| tNFA_TECHNOLOGY_MASK techsSwitchOn = 0; //all techs that are active at full power |
| tNFA_TECHNOLOGY_MASK techsSwitchOff = 0; //all techs that are active when phone is turned off |
| tNFA_TECHNOLOGY_MASK techsBatteryOff = 0; //all techs that are active when there is no power |
| |
| //for every route in XML, look for protocol route; |
| //collect every protocol according to it's desired power mode |
| for (RouteDataSet::Database::iterator iter = db->begin(); iter != db->end(); iter++) |
| { |
| RouteData* routeData = *iter; |
| RouteDataForTechnology * route = NULL; |
| if (routeData->mRouteType != RouteData::TechnologyRoute) |
| continue; //skip other kinds of routing data |
| route = (RouteDataForTechnology*) (*iter); |
| if (route->mNfaEeHandle == NFA_EE_HANDLE_DH) |
| { |
| if (route->mSwitchOn) |
| techsSwitchOn |= route->mTechnology; |
| if (route->mSwitchOff) |
| techsSwitchOff |= route->mTechnology; |
| if (route->mBatteryOff) |
| techsBatteryOff |= route->mTechnology; |
| } |
| } |
| |
| if (techsSwitchOn | techsSwitchOff | techsBatteryOff) |
| { |
| ALOGD ("%s: route to EE h=0x%X", fn, NFA_EE_HANDLE_DH); |
| SyncEventGuard guard (mRoutingEvent); |
| nfaStat = NFA_EeSetDefaultTechRouting (NFA_EE_HANDLE_DH, |
| techsSwitchOn, techsSwitchOff, techsBatteryOff); |
| if (nfaStat == NFA_STATUS_OK) |
| mRoutingEvent.wait (); |
| else |
| ALOGE ("%s: fail route to EE; error=0x%X", fn, nfaStat); |
| } |
| } |
| |
| ////////////////////// |
| // if route database is empty, setup a default route |
| ////////////////////// |
| if (db->empty()) |
| { |
| tNFA_HANDLE eeHandle = NFA_EE_HANDLE_DH; |
| if (routeSelection == SecElemRoute) |
| eeHandle = mActiveEeHandle; |
| ALOGD ("%s: route to default EE h=0x%X", fn, eeHandle); |
| SyncEventGuard guard (mRoutingEvent); |
| nfaStat = NFA_EeSetDefaultTechRouting (eeHandle, techMask, 0, 0); |
| if (nfaStat == NFA_STATUS_OK) |
| mRoutingEvent.wait (); |
| else |
| ALOGE ("%s: fail route to EE; error=0x%X", fn, nfaStat); |
| } |
| ALOGD ("%s: exit", fn); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: nfaEeCallback |
| ** |
| ** Description: Receive execution environment-related events from stack. |
| ** event: Event code. |
| ** eventData: Event data. |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| void SecureElement::nfaEeCallback (tNFA_EE_EVT event, tNFA_EE_CBACK_DATA* eventData) |
| { |
| static const char fn [] = "SecureElement::nfaEeCallback"; |
| |
| switch (event) |
| { |
| case NFA_EE_REGISTER_EVT: |
| { |
| SyncEventGuard guard (sSecElem.mEeRegisterEvent); |
| ALOGD ("%s: NFA_EE_REGISTER_EVT; status=%u", fn, eventData->ee_register); |
| sSecElem.mEeRegisterEvent.notifyOne(); |
| } |
| break; |
| |
| case NFA_EE_MODE_SET_EVT: |
| { |
| ALOGD ("%s: NFA_EE_MODE_SET_EVT; status: 0x%04X handle: 0x%04X mActiveEeHandle: 0x%04X", fn, |
| eventData->mode_set.status, eventData->mode_set.ee_handle, sSecElem.mActiveEeHandle); |
| |
| if (eventData->mode_set.status == NFA_STATUS_OK) |
| { |
| tNFA_EE_INFO *pEE = sSecElem.findEeByHandle (eventData->mode_set.ee_handle); |
| if (pEE) |
| { |
| pEE->ee_status ^= 1; |
| ALOGD ("%s: NFA_EE_MODE_SET_EVT; pEE->ee_status: %s (0x%04x)", fn, SecureElement::eeStatusToString(pEE->ee_status), pEE->ee_status); |
| } |
| else |
| ALOGE ("%s: NFA_EE_MODE_SET_EVT; EE: 0x%04x not found. mActiveEeHandle: 0x%04x", fn, eventData->mode_set.ee_handle, sSecElem.mActiveEeHandle); |
| } |
| SyncEventGuard guard (sSecElem.mEeSetModeEvent); |
| sSecElem.mEeSetModeEvent.notifyOne(); |
| } |
| break; |
| |
| case NFA_EE_SET_TECH_CFG_EVT: |
| { |
| ALOGD ("%s: NFA_EE_SET_TECH_CFG_EVT; status=0x%X", fn, eventData->status); |
| SyncEventGuard guard (sSecElem.mRoutingEvent); |
| sSecElem.mRoutingEvent.notifyOne (); |
| } |
| break; |
| |
| case NFA_EE_SET_PROTO_CFG_EVT: |
| { |
| ALOGD ("%s: NFA_EE_SET_PROTO_CFG_EVT; status=0x%X", fn, eventData->status); |
| SyncEventGuard guard (sSecElem.mRoutingEvent); |
| sSecElem.mRoutingEvent.notifyOne (); |
| } |
| break; |
| |
| case NFA_EE_ACTION_EVT: |
| { |
| tNFA_EE_ACTION& action = eventData->action; |
| if (action.trigger == NFC_EE_TRIG_SELECT) |
| ALOGD ("%s: NFA_EE_ACTION_EVT; h=0x%X; trigger=select (0x%X)", fn, action.ee_handle, action.trigger); |
| else if (action.trigger == NFC_EE_TRIG_APP_INIT) |
| { |
| tNFC_APP_INIT& app_init = action.param.app_init; |
| ALOGD ("%s: NFA_EE_ACTION_EVT; h=0x%X; trigger=app-init (0x%X); aid len=%u; data len=%u", fn, |
| action.ee_handle, action.trigger, app_init.len_aid, app_init.len_data); |
| //if app-init operation is successful; |
| //app_init.data[] contains two bytes, which are the status codes of the event; |
| //app_init.data[] does not contain an APDU response; |
| //see EMV Contactless Specification for Payment Systems; Book B; Entry Point Specification; |
| //version 2.1; March 2011; section 3.3.3.5; |
| if ( (app_init.len_data > 1) && |
| (app_init.data[0] == 0x90) && |
| (app_init.data[1] == 0x00) ) |
| { |
| sSecElem.notifyTransactionListenersOfAid (app_init.aid, app_init.len_aid); |
| } |
| } |
| else if (action.trigger == NFC_EE_TRIG_RF_PROTOCOL) |
| ALOGD ("%s: NFA_EE_ACTION_EVT; h=0x%X; trigger=rf protocol (0x%X)", fn, action.ee_handle, action.trigger); |
| else if (action.trigger == NFC_EE_TRIG_RF_TECHNOLOGY) |
| ALOGD ("%s: NFA_EE_ACTION_EVT; h=0x%X; trigger=rf tech (0x%X)", fn, action.ee_handle, action.trigger); |
| else |
| ALOGE ("%s: NFA_EE_ACTION_EVT; h=0x%X; unknown trigger (0x%X)", fn, action.ee_handle, action.trigger); |
| } |
| break; |
| |
| case NFA_EE_DISCOVER_REQ_EVT: |
| ALOGD ("%s: NFA_EE_DISCOVER_REQ_EVT; status=0x%X; num ee=%u", __FUNCTION__, |
| eventData->discover_req.status, eventData->discover_req.num_ee); |
| sSecElem.storeUiccInfo (eventData->discover_req); |
| break; |
| |
| case NFA_EE_NO_CB_ERR_EVT: |
| ALOGD ("%s: NFA_EE_NO_CB_ERR_EVT status=%u", fn, eventData->status); |
| break; |
| |
| case NFA_EE_ADD_AID_EVT: |
| { |
| ALOGD ("%s: NFA_EE_ADD_AID_EVT status=%u", fn, eventData->status); |
| SyncEventGuard guard (sSecElem.mAidAddRemoveEvent); |
| sSecElem.mAidAddRemoveEvent.notifyOne (); |
| } |
| break; |
| |
| case NFA_EE_REMOVE_AID_EVT: |
| { |
| ALOGD ("%s: NFA_EE_REMOVE_AID_EVT status=%u", fn, eventData->status); |
| SyncEventGuard guard (sSecElem.mAidAddRemoveEvent); |
| sSecElem.mAidAddRemoveEvent.notifyOne (); |
| } |
| break; |
| |
| case NFA_EE_NEW_EE_EVT: |
| { |
| ALOGD ("%s: NFA_EE_NEW_EE_EVT h=0x%X; status=%u", fn, |
| eventData->new_ee.ee_handle, eventData->new_ee.ee_status); |
| // Indicate there are new EE |
| sSecElem.mbNewEE = true; |
| } |
| break; |
| |
| default: |
| ALOGE ("%s: unknown event=%u ????", fn, event); |
| break; |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function getSeVerInfo |
| ** |
| ** Description Gets version information and id for a secure element. The |
| ** seIndex parmeter is the zero based index of the secure |
| ** element to get verion info for. The version infommation |
| ** is returned as a string int the verInfo parameter. |
| ** |
| ** Returns ture on success, false on failure |
| ** |
| *******************************************************************************/ |
| bool SecureElement::getSeVerInfo(int seIndex, char * verInfo, int verInfoSz, UINT8 * seid) |
| { |
| ALOGD("%s: enter, seIndex=%d", __FUNCTION__, seIndex); |
| |
| if (seIndex > (mActualNumEe-1)) |
| { |
| ALOGE("%s: invalid se index: %d, only %d SEs in system", __FUNCTION__, seIndex, mActualNumEe); |
| return false; |
| } |
| |
| *seid = mEeInfo[seIndex].ee_handle; |
| |
| if ((mEeInfo[seIndex].num_interface == 0) || (mEeInfo[seIndex].ee_interface[0] == NCI_NFCEE_INTERFACE_HCI_ACCESS) ) |
| { |
| return false; |
| } |
| |
| strncpy(verInfo, "Version info not available", verInfoSz-1); |
| verInfo[verInfoSz-1] = '\0'; |
| |
| UINT8 pipe = (mEeInfo[seIndex].ee_handle == EE_HANDLE_0xF3) ? 0x70 : 0x71; |
| UINT8 host = (pipe == STATIC_PIPE_0x70) ? 0x02 : 0x03; |
| UINT8 gate = (pipe == STATIC_PIPE_0x70) ? 0xF0 : 0xF1; |
| |
| tNFA_STATUS nfaStat = NFA_HciAddStaticPipe(mNfaHciHandle, host, gate, pipe); |
| if (nfaStat != NFA_STATUS_OK) |
| { |
| ALOGE ("%s: NFA_HciAddStaticPipe() failed, pipe = 0x%x, error=0x%X", __FUNCTION__, pipe, nfaStat); |
| return true; |
| } |
| |
| SyncEventGuard guard (mVerInfoEvent); |
| if (NFA_STATUS_OK == (nfaStat = NFA_HciGetRegistry (mNfaHciHandle, pipe, 0x02))) |
| { |
| if (false == mVerInfoEvent.wait(200)) |
| { |
| ALOGE ("%s: wait response timeout", __FUNCTION__); |
| } |
| else |
| { |
| snprintf(verInfo, verInfoSz-1, "Oberthur OS S/N: 0x%02x%02x%02x", mVerInfo[0], mVerInfo[1], mVerInfo[2]); |
| verInfo[verInfoSz-1] = '\0'; |
| } |
| } |
| else |
| { |
| ALOGE ("%s: NFA_HciGetRegistry () failed: 0x%X", __FUNCTION__, nfaStat); |
| } |
| return true; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function getActualNumEe |
| ** |
| ** Description Returns number of secure elements we know about. |
| ** |
| ** Returns Number of secure elements we know about. |
| ** |
| *******************************************************************************/ |
| UINT8 SecureElement::getActualNumEe() |
| { |
| return mActualNumEe; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function: nfaHciCallback |
| ** |
| ** Description: Receive Host Controller Interface-related events from stack. |
| ** event: Event code. |
| ** eventData: Event data. |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| void SecureElement::nfaHciCallback (tNFA_HCI_EVT event, tNFA_HCI_EVT_DATA* eventData) |
| { |
| static const char fn [] = "SecureElement::nfaHciCallback"; |
| ALOGD ("%s: event=0x%X", fn, event); |
| |
| switch (event) |
| { |
| case NFA_HCI_REGISTER_EVT: |
| { |
| ALOGD ("%s: NFA_HCI_REGISTER_EVT; status=0x%X; handle=0x%X", fn, |
| eventData->hci_register.status, eventData->hci_register.hci_handle); |
| SyncEventGuard guard (sSecElem.mHciRegisterEvent); |
| sSecElem.mNfaHciHandle = eventData->hci_register.hci_handle; |
| sSecElem.mHciRegisterEvent.notifyOne(); |
| } |
| break; |
| |
| case NFA_HCI_ALLOCATE_GATE_EVT: |
| { |
| ALOGD ("%s: NFA_HCI_ALLOCATE_GATE_EVT; status=0x%X; gate=0x%X", fn, eventData->status, eventData->allocated.gate); |
| SyncEventGuard guard (sSecElem.mAllocateGateEvent); |
| sSecElem.mCommandStatus = eventData->status; |
| sSecElem.mNewSourceGate = (eventData->allocated.status == NFA_STATUS_OK) ? eventData->allocated.gate : 0; |
| sSecElem.mAllocateGateEvent.notifyOne(); |
| } |
| break; |
| |
| case NFA_HCI_DEALLOCATE_GATE_EVT: |
| { |
| tNFA_HCI_DEALLOCATE_GATE& deallocated = eventData->deallocated; |
| ALOGD ("%s: NFA_HCI_DEALLOCATE_GATE_EVT; status=0x%X; gate=0x%X", fn, deallocated.status, deallocated.gate); |
| SyncEventGuard guard (sSecElem.mDeallocateGateEvent); |
| sSecElem.mDeallocateGateEvent.notifyOne(); |
| } |
| break; |
| |
| case NFA_HCI_GET_GATE_PIPE_LIST_EVT: |
| { |
| ALOGD ("%s: NFA_HCI_GET_GATE_PIPE_LIST_EVT; status=0x%X; num_pipes: %u num_gates: %u", fn, |
| eventData->gates_pipes.status, eventData->gates_pipes.num_pipes, eventData->gates_pipes.num_gates); |
| SyncEventGuard guard (sSecElem.mPipeListEvent); |
| sSecElem.mCommandStatus = eventData->gates_pipes.status; |
| sSecElem.mHciCfg = eventData->gates_pipes; |
| sSecElem.mPipeListEvent.notifyOne(); |
| } |
| break; |
| |
| case NFA_HCI_CREATE_PIPE_EVT: |
| { |
| ALOGD ("%s: NFA_HCI_CREATE_PIPE_EVT; status=0x%X; pipe=0x%X; src gate=0x%X; dest host=0x%X; dest gate=0x%X", fn, |
| eventData->created.status, eventData->created.pipe, eventData->created.source_gate, eventData->created.dest_host, eventData->created.dest_gate); |
| SyncEventGuard guard (sSecElem.mCreatePipeEvent); |
| sSecElem.mCommandStatus = eventData->created.status; |
| sSecElem.mNewPipeId = eventData->created.pipe; |
| sSecElem.mCreatePipeEvent.notifyOne(); |
| } |
| break; |
| |
| case NFA_HCI_OPEN_PIPE_EVT: |
| { |
| ALOGD ("%s: NFA_HCI_OPEN_PIPE_EVT; status=0x%X; pipe=0x%X", fn, eventData->opened.status, eventData->opened.pipe); |
| SyncEventGuard guard (sSecElem.mPipeOpenedEvent); |
| sSecElem.mCommandStatus = eventData->opened.status; |
| sSecElem.mPipeOpenedEvent.notifyOne(); |
| } |
| break; |
| |
| case NFA_HCI_EVENT_SENT_EVT: |
| ALOGD ("%s: NFA_HCI_EVENT_SENT_EVT; status=0x%X", fn, eventData->evt_sent.status); |
| break; |
| |
| case NFA_HCI_RSP_RCVD_EVT: //response received from secure element |
| { |
| tNFA_HCI_RSP_RCVD& rsp_rcvd = eventData->rsp_rcvd; |
| ALOGD ("%s: NFA_HCI_RSP_RCVD_EVT; status: 0x%X; code: 0x%X; pipe: 0x%X; len: %u", fn, |
| rsp_rcvd.status, rsp_rcvd.rsp_code, rsp_rcvd.pipe, rsp_rcvd.rsp_len); |
| } |
| break; |
| |
| case NFA_HCI_GET_REG_RSP_EVT : |
| ALOGD ("%s: NFA_HCI_GET_REG_RSP_EVT; status: 0x%X; pipe: 0x%X, len: %d", fn, |
| eventData->registry.status, eventData->registry.pipe, eventData->registry.data_len); |
| if (eventData->registry.data_len >= 19 && ((eventData->registry.pipe == STATIC_PIPE_0x70) || (eventData->registry.pipe == STATIC_PIPE_0x71))) |
| { |
| SyncEventGuard guard (sSecElem.mVerInfoEvent); |
| // Oberthur OS version is in bytes 16,17, and 18 |
| sSecElem.mVerInfo[0] = eventData->registry.reg_data[16]; |
| sSecElem.mVerInfo[1] = eventData->registry.reg_data[17]; |
| sSecElem.mVerInfo[2] = eventData->registry.reg_data[18]; |
| sSecElem.mVerInfoEvent.notifyOne (); |
| } |
| break; |
| |
| case NFA_HCI_EVENT_RCVD_EVT: |
| ALOGD ("%s: NFA_HCI_EVENT_RCVD_EVT; code: 0x%X; pipe: 0x%X; data len: %u", fn, |
| eventData->rcvd_evt.evt_code, eventData->rcvd_evt.pipe, eventData->rcvd_evt.evt_len); |
| if ((eventData->rcvd_evt.pipe == STATIC_PIPE_0x70) || (eventData->rcvd_evt.pipe == STATIC_PIPE_0x71)) |
| { |
| ALOGD ("%s: NFA_HCI_EVENT_RCVD_EVT; data from static pipe", fn); |
| SyncEventGuard guard (sSecElem.mTransceiveEvent); |
| sSecElem.mActualResponseSize = (eventData->rcvd_evt.evt_len > MAX_RESPONSE_SIZE) ? MAX_RESPONSE_SIZE : eventData->rcvd_evt.evt_len; |
| sSecElem.mTransceiveEvent.notifyOne (); |
| } |
| else if (eventData->rcvd_evt.evt_code == NFA_HCI_EVT_POST_DATA) |
| { |
| ALOGD ("%s: NFA_HCI_EVENT_RCVD_EVT; NFA_HCI_EVT_POST_DATA", fn); |
| SyncEventGuard guard (sSecElem.mTransceiveEvent); |
| sSecElem.mActualResponseSize = (eventData->rcvd_evt.evt_len > MAX_RESPONSE_SIZE) ? MAX_RESPONSE_SIZE : eventData->rcvd_evt.evt_len; |
| sSecElem.mTransceiveEvent.notifyOne (); |
| } |
| else if (eventData->rcvd_evt.evt_code == NFA_HCI_EVT_TRANSACTION) |
| { |
| ALOGD ("%s: NFA_HCI_EVENT_RCVD_EVT; NFA_HCI_EVT_TRANSACTION", fn); |
| // If we got an AID, notify any listeners |
| if ((eventData->rcvd_evt.evt_len > 3) && (eventData->rcvd_evt.p_evt_buf[0] == 0x81) ) |
| sSecElem.notifyTransactionListenersOfAid (&eventData->rcvd_evt.p_evt_buf[2], eventData->rcvd_evt.p_evt_buf[1]); |
| } |
| break; |
| |
| case NFA_HCI_SET_REG_RSP_EVT: //received response to write registry command |
| { |
| tNFA_HCI_REGISTRY& registry = eventData->registry; |
| ALOGD ("%s: NFA_HCI_SET_REG_RSP_EVT; status=0x%X; pipe=0x%X", fn, registry.status, registry.pipe); |
| SyncEventGuard guard (sSecElem.mRegistryEvent); |
| sSecElem.mRegistryEvent.notifyOne (); |
| break; |
| } |
| |
| default: |
| ALOGE ("%s: unknown event code=0x%X ????", fn, event); |
| break; |
| } |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: findEeByHandle |
| ** |
| ** Description: Find information about an execution environment. |
| ** eeHandle: Handle to execution environment. |
| ** |
| ** Returns: Information about an execution environment. |
| ** |
| *******************************************************************************/ |
| tNFA_EE_INFO *SecureElement::findEeByHandle (tNFA_HANDLE eeHandle) |
| { |
| for (UINT8 xx = 0; xx < mActualNumEe; xx++) |
| { |
| if (mEeInfo[xx].ee_handle == eeHandle) |
| return (&mEeInfo[xx]); |
| } |
| return (NULL); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: getDefaultEeHandle |
| ** |
| ** Description: Get the handle to the execution environment. |
| ** |
| ** Returns: Handle to the execution environment. |
| ** |
| *******************************************************************************/ |
| tNFA_HANDLE SecureElement::getDefaultEeHandle () |
| { |
| UINT16 overrideEeHandle = NFA_HANDLE_GROUP_EE | mActiveSeOverride; |
| // Find the first EE that is not the HCI Access i/f. |
| for (UINT8 xx = 0; xx < mActualNumEe; xx++) |
| { |
| if (mActiveSeOverride && (overrideEeHandle != mEeInfo[xx].ee_handle)) |
| continue; //skip all the EE's that are ignored |
| if ((mEeInfo[xx].num_interface != 0) && |
| (mEeInfo[xx].ee_interface[0] != NCI_NFCEE_INTERFACE_HCI_ACCESS) && |
| (mEeInfo[xx].ee_status != NFC_NFCEE_STATUS_INACTIVE)) |
| return (mEeInfo[xx].ee_handle); |
| } |
| return NFA_HANDLE_INVALID; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: findUiccByHandle |
| ** |
| ** Description: Find information about an execution environment. |
| ** eeHandle: Handle of the execution environment. |
| ** |
| ** Returns: Information about the execution environment. |
| ** |
| *******************************************************************************/ |
| tNFA_EE_DISCOVER_INFO *SecureElement::findUiccByHandle (tNFA_HANDLE eeHandle) |
| { |
| for (UINT8 index = 0; index < mUiccInfo.num_ee; index++) |
| { |
| if (mUiccInfo.ee_disc_info[index].ee_handle == eeHandle) |
| { |
| return (&mUiccInfo.ee_disc_info[index]); |
| } |
| } |
| ALOGE ("SecureElement::findUiccByHandle: ee h=0x%4x not found", eeHandle); |
| return NULL; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: eeStatusToString |
| ** |
| ** Description: Convert status code to status text. |
| ** status: Status code |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| const char* SecureElement::eeStatusToString (UINT8 status) |
| { |
| switch (status) |
| { |
| case NFC_NFCEE_STATUS_ACTIVE: |
| return("Connected/Active"); |
| case NFC_NFCEE_STATUS_INACTIVE: |
| return("Connected/Inactive"); |
| case NFC_NFCEE_STATUS_REMOVED: |
| return("Removed"); |
| } |
| return("?? Unknown ??"); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: connectionEventHandler |
| ** |
| ** Description: Receive card-emulation related events from stack. |
| ** event: Event code. |
| ** eventData: Event data. |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| void SecureElement::connectionEventHandler (UINT8 event, tNFA_CONN_EVT_DATA* eventData) |
| { |
| switch (event) |
| { |
| case NFA_CE_UICC_LISTEN_CONFIGURED_EVT: |
| { |
| SyncEventGuard guard (mUiccListenEvent); |
| mUiccListenEvent.notifyOne (); |
| } |
| break; |
| } |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: routeToSecureElement |
| ** |
| ** Description: Adjust controller's listen-mode routing table so transactions |
| ** are routed to the secure elements. |
| ** |
| ** Returns: True if ok. |
| ** |
| *******************************************************************************/ |
| bool SecureElement::routeToSecureElement () |
| { |
| static const char fn [] = "SecureElement::routeToSecureElement"; |
| ALOGD ("%s: enter", fn); |
| tNFA_STATUS nfaStat = NFA_STATUS_FAILED; |
| tNFA_TECHNOLOGY_MASK tech_mask = NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B; |
| bool retval = false; |
| |
| if (! mIsInit) |
| { |
| ALOGE ("%s: not init", fn); |
| return false; |
| } |
| |
| if (mCurrentRouteSelection == SecElemRoute) |
| { |
| ALOGE ("%s: already sec elem route", fn); |
| return true; |
| } |
| |
| if (mActiveEeHandle == NFA_HANDLE_INVALID) |
| { |
| ALOGE ("%s: invalid EE handle", fn); |
| return false; |
| } |
| |
| adjustRoutes (SecElemRoute); |
| |
| { |
| unsigned long num = 0; |
| if (GetNumValue("UICC_LISTEN_TECH_MASK", &num, sizeof(num))) |
| tech_mask = num; |
| ALOGD ("%s: start UICC listen; h=0x%X; tech mask=0x%X", fn, mActiveEeHandle, tech_mask); |
| SyncEventGuard guard (mUiccListenEvent); |
| nfaStat = NFA_CeConfigureUiccListenTech (mActiveEeHandle, tech_mask); |
| if (nfaStat == NFA_STATUS_OK) |
| { |
| mUiccListenEvent.wait (); |
| retval = true; |
| } |
| else |
| ALOGE ("%s: fail to start UICC listen", fn); |
| } |
| |
| ALOGD ("%s: exit; ok=%u", fn, retval); |
| return retval; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: routeToDefault |
| ** |
| ** Description: Adjust controller's listen-mode routing table so transactions |
| ** are routed to the default destination. |
| ** |
| ** Returns: True if ok. |
| ** |
| *******************************************************************************/ |
| bool SecureElement::routeToDefault () |
| { |
| static const char fn [] = "SecureElement::routeToDefault"; |
| tNFA_STATUS nfaStat = NFA_STATUS_FAILED; |
| bool retval = false; |
| |
| ALOGD ("%s: enter", fn); |
| if (! mIsInit) |
| { |
| ALOGE ("%s: not init", fn); |
| return false; |
| } |
| |
| if (mCurrentRouteSelection == DefaultRoute) |
| { |
| ALOGD ("%s: already default route", fn); |
| return true; |
| } |
| |
| if (mActiveEeHandle != NFA_HANDLE_INVALID) |
| { |
| ALOGD ("%s: stop UICC listen; EE h=0x%X", fn, mActiveEeHandle); |
| SyncEventGuard guard (mUiccListenEvent); |
| nfaStat = NFA_CeConfigureUiccListenTech (mActiveEeHandle, 0); |
| if (nfaStat == NFA_STATUS_OK) |
| { |
| mUiccListenEvent.wait (); |
| retval = true; |
| } |
| else |
| ALOGE ("%s: fail to stop UICC listen", fn); |
| } |
| else |
| retval = true; |
| |
| adjustRoutes (DefaultRoute); |
| |
| ALOGD ("%s: exit; ok=%u", fn, retval); |
| return retval; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: isBusy |
| ** |
| ** Description: Whether controller is routing listen-mode events to |
| ** secure elements or a pipe is connected. |
| ** |
| ** Returns: True if either case is true. |
| ** |
| *******************************************************************************/ |
| bool SecureElement::isBusy () |
| { |
| bool retval = (mCurrentRouteSelection == SecElemRoute) || mIsPiping; |
| ALOGD ("SecureElement::isBusy: %u", retval); |
| return retval; |
| } |
| |
