| /* |
| * Copyright (C) 2012 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include <semaphore.h> |
| #include <errno.h> |
| #include "OverrideLog.h" |
| #include "NfcJniUtil.h" |
| #include "NfcAdaptation.h" |
| #include "SyncEvent.h" |
| #include "PeerToPeer.h" |
| #include "SecureElement.h" |
| #include "NfcTag.h" |
| #include "config.h" |
| #include "PowerSwitch.h" |
| #include "JavaClassConstants.h" |
| #include "Pn544Interop.h" |
| |
| extern "C" |
| { |
| #include "nfa_api.h" |
| #include "nfa_p2p_api.h" |
| #include "rw_api.h" |
| #include "nfa_ee_api.h" |
| #include "nfc_brcm_defs.h" |
| #include "nfa_cho_api.h" |
| #include "ce_api.h" |
| } |
| |
| extern UINT8 *p_nfa_dm_lptd_cfg; |
| extern UINT8 *p_nfa_dm_start_up_cfg; |
| extern const UINT8 nfca_version_string []; |
| namespace android |
| { |
| extern bool gIsTagDeactivating; |
| extern bool gIsSelectingRfInterface; |
| extern void nativeNfcTag_doTransceiveStatus (uint8_t * buf, uint32_t buflen); |
| extern void nativeNfcTag_doConnectStatus (jboolean is_connect_ok); |
| extern void nativeNfcTag_doDeactivateStatus (int status); |
| extern void nativeNfcTag_doWriteStatus (jboolean is_write_ok); |
| extern void nativeNfcTag_doCheckNdefResult (tNFA_STATUS status, uint32_t max_size, uint32_t current_size, uint8_t flags); |
| extern void nativeNfcTag_doMakeReadonlyResult (tNFA_STATUS status); |
| extern void nativeNfcTag_doPresenceCheckResult (tNFA_STATUS status); |
| extern void nativeNfcTag_formatStatus (bool is_ok); |
| extern void nativeNfcTag_resetPresenceCheck (); |
| extern void nativeNfcTag_doReadCompleted (tNFA_STATUS status); |
| extern void nativeNfcTag_abortWaits (); |
| extern void nativeLlcpConnectionlessSocket_abortWait (); |
| extern void nativeNfcTag_registerNdefTypeHandler (); |
| extern void nativeLlcpConnectionlessSocket_receiveData (uint8_t* data, uint32_t len, uint32_t remote_sap); |
| } |
| |
| |
| /***************************************************************************** |
| ** |
| ** public variables and functions |
| ** |
| *****************************************************************************/ |
| |
| namespace android |
| { |
| int gGeneralTransceiveTimeout = 1000; |
| jmethodID gCachedNfcManagerNotifyNdefMessageListeners; |
| jmethodID gCachedNfcManagerNotifyTransactionListeners; |
| jmethodID gCachedNfcManagerNotifyLlcpLinkActivation; |
| jmethodID gCachedNfcManagerNotifyLlcpLinkDeactivated; |
| jmethodID gCachedNfcManagerNotifySeFieldActivated; |
| jmethodID gCachedNfcManagerNotifySeFieldDeactivated; |
| jmethodID gCachedNfcManagerNotifySeListenActivated; |
| jmethodID gCachedNfcManagerNotifySeListenDeactivated; |
| const char* gNativeP2pDeviceClassName = "com/android/nfc/dhimpl/NativeP2pDevice"; |
| const char* gNativeLlcpServiceSocketClassName = "com/android/nfc/dhimpl/NativeLlcpServiceSocket"; |
| const char* gNativeLlcpConnectionlessSocketClassName = "com/android/nfc/dhimpl/NativeLlcpConnectionlessSocket"; |
| const char* gNativeLlcpSocketClassName = "com/android/nfc/dhimpl/NativeLlcpSocket"; |
| const char* gNativeNfcTagClassName = "com/android/nfc/dhimpl/NativeNfcTag"; |
| const char* gNativeNfcManagerClassName = "com/android/nfc/dhimpl/NativeNfcManager"; |
| const char* gNativeNfcSecureElementClassName = "com/android/nfc/dhimpl/NativeNfcSecureElement"; |
| void doStartupConfig (); |
| void startStopPolling (bool isStartPolling); |
| void startRfDiscovery (bool isStart); |
| } |
| |
| |
| /***************************************************************************** |
| ** |
| ** private variables and functions |
| ** |
| *****************************************************************************/ |
| namespace android |
| { |
| static jint sLastError = ERROR_BUFFER_TOO_SMALL; |
| static jmethodID sCachedNfcManagerNotifySeApduReceived; |
| static jmethodID sCachedNfcManagerNotifySeMifareAccess; |
| static jmethodID sCachedNfcManagerNotifySeEmvCardRemoval; |
| static jmethodID sCachedNfcManagerNotifyTargetDeselected; |
| static SyncEvent sNfaEnableEvent; //event for NFA_Enable() |
| static SyncEvent sNfaDisableEvent; //event for NFA_Disable() |
| static SyncEvent sNfaEnableDisablePollingEvent; //event for NFA_EnablePolling(), NFA_DisablePolling() |
| static SyncEvent sNfaSetConfigEvent; // event for Set_Config.... |
| static bool sIsNfaEnabled = false; |
| static bool sDiscoveryEnabled = false; //is polling for tag? |
| static bool sIsDisabling = false; |
| static bool sRfEnabled = false; // whether RF discovery is enabled |
| static bool sSeRfActive = false; // whether RF with SE is likely active |
| static bool sP2pActive = false; // whether p2p was last active |
| static int sConnlessSap = 0; |
| static int sConnlessLinkMiu = 0; |
| static bool sAbortConnlessWait = false; |
| static bool sIsSecElemSelected = false; //has NFC service selected a sec elem |
| static UINT8 * sOriginalLptdCfg = NULL; |
| static UINT8 sNewLptdCfg[LPTD_PARAM_LEN]; |
| static UINT32 sConfigUpdated = 0; |
| #define CONFIG_UPDATE_LPTD (1 << 0) |
| #define CONFIG_UPDATE_TECH_MASK (1 << 1) |
| #define DEFAULT_TECH_MASK (NFA_TECHNOLOGY_MASK_A \ |
| | NFA_TECHNOLOGY_MASK_B \ |
| | NFA_TECHNOLOGY_MASK_F \ |
| | NFA_TECHNOLOGY_MASK_ISO15693 \ |
| | NFA_TECHNOLOGY_MASK_B_PRIME \ |
| | NFA_TECHNOLOGY_MASK_A_ACTIVE \ |
| | NFA_TECHNOLOGY_MASK_F_ACTIVE) |
| |
| |
| static void nfaConnectionCallback (UINT8 event, tNFA_CONN_EVT_DATA *eventData); |
| static void nfaDeviceManagementCallback (UINT8 event, tNFA_DM_CBACK_DATA *eventData); |
| static bool isPeerToPeer (tNFA_ACTIVATED& activated); |
| static bool isListenMode(tNFA_ACTIVATED& activated); |
| |
| ///////////////////////////////////////////////////////////// |
| ///////////////////////////////////////////////////////////// |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: getNative |
| ** |
| ** Description: Get native data |
| ** |
| ** Returns: Native data structure. |
| ** |
| *******************************************************************************/ |
| nfc_jni_native_data *getNative (JNIEnv* e, jobject o) |
| { |
| static struct nfc_jni_native_data *sCachedNat = NULL; |
| if (e) |
| { |
| sCachedNat = nfc_jni_get_nat(e, o); |
| } |
| return sCachedNat; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: handleRfDiscoveryEvent |
| ** |
| ** Description: Handle RF-discovery events from the stack. |
| ** discoveredDevice: Discovered device. |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| static void handleRfDiscoveryEvent (tNFC_RESULT_DEVT* discoveredDevice) |
| { |
| if (discoveredDevice->more) |
| { |
| //there is more discovery notification coming |
| return; |
| } |
| |
| bool isP2p = NfcTag::getInstance ().isP2pDiscovered (); |
| if (isP2p) |
| { |
| //select the peer that supports P2P |
| NfcTag::getInstance ().selectP2p(); |
| } |
| else |
| { |
| //select the first of multiple tags that is discovered |
| NfcTag::getInstance ().selectFirstTag(); |
| } |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: nfaConnectionCallback |
| ** |
| ** Description: Receive connection-related events from stack. |
| ** connEvent: Event code. |
| ** eventData: Event data. |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| static void nfaConnectionCallback (UINT8 connEvent, tNFA_CONN_EVT_DATA* eventData) |
| { |
| tNFA_STATUS status = NFA_STATUS_FAILED; |
| ALOGD("%s: event= %u", __FUNCTION__, connEvent); |
| |
| if (gIsTagDeactivating && connEvent != NFA_DEACTIVATED_EVT && connEvent != NFA_PRESENCE_CHECK_EVT && connEvent != NFA_DATA_EVT) |
| { |
| // special case to switching frame interface for ISO_DEP tags |
| gIsTagDeactivating = false; |
| ALOGD("%s: deactivating, should get NFA_DEACTIVATED_EVT", __FUNCTION__); |
| nativeNfcTag_doDeactivateStatus(1); |
| } |
| |
| switch (connEvent) |
| { |
| case NFA_POLL_ENABLED_EVT: // whether polling successfully started |
| { |
| ALOGD("%s: NFA_POLL_ENABLED_EVT: status = %u", __FUNCTION__, eventData->status); |
| |
| SyncEventGuard guard (sNfaEnableDisablePollingEvent); |
| sNfaEnableDisablePollingEvent.notifyOne (); |
| } |
| break; |
| |
| case NFA_POLL_DISABLED_EVT: // Listening/Polling stopped |
| { |
| ALOGD("%s: NFA_POLL_DISABLED_EVT: status = %u", __FUNCTION__, eventData->status); |
| |
| SyncEventGuard guard (sNfaEnableDisablePollingEvent); |
| sNfaEnableDisablePollingEvent.notifyOne (); |
| } |
| break; |
| |
| case NFA_RF_DISCOVERY_STARTED_EVT: // RF Discovery started |
| { |
| ALOGD("%s: NFA_RF_DISCOVERY_STARTED_EVT: status = %u", __FUNCTION__, eventData->status); |
| |
| SyncEventGuard guard (sNfaEnableDisablePollingEvent); |
| sNfaEnableDisablePollingEvent.notifyOne (); |
| } |
| break; |
| |
| case NFA_RF_DISCOVERY_STOPPED_EVT: // RF Discovery stopped event |
| { |
| ALOGD("%s: NFA_RF_DISCOVERY_STOPPED_EVT: status = %u", __FUNCTION__, eventData->status); |
| |
| SyncEventGuard guard (sNfaEnableDisablePollingEvent); |
| sNfaEnableDisablePollingEvent.notifyOne (); |
| } |
| break; |
| |
| case NFA_DISC_RESULT_EVT: // NFC link/protocol discovery notificaiton |
| status = eventData->disc_result.status; |
| ALOGD("%s: NFA_DISC_RESULT_EVT: status = %d", __FUNCTION__, status); |
| if (status != NFA_STATUS_OK) |
| { |
| ALOGE("%s: NFA_DISC_RESULT_EVT error: status = %d", __FUNCTION__, status); |
| } |
| else |
| { |
| NfcTag::getInstance().connectionEventHandler(connEvent, eventData); |
| handleRfDiscoveryEvent(&eventData->disc_result.discovery_ntf); |
| } |
| break; |
| |
| case NFA_SELECT_RESULT_EVT: // NFC link/protocol discovery select response |
| ALOGD("%s: NFA_SELECT_RESULT_EVT: status = %d, gIsSelectingRfInterface = %d, sIsDisabling=%d", __FUNCTION__, eventData->status, gIsSelectingRfInterface, sIsDisabling); |
| |
| if (sIsDisabling) |
| break; |
| |
| if (eventData->status != NFA_STATUS_OK) |
| { |
| if (gIsSelectingRfInterface) |
| { |
| nativeNfcTag_doConnectStatus(false); |
| } |
| |
| ALOGE("%s: NFA_SELECT_RESULT_EVT error: status = %d", __FUNCTION__, eventData->status); |
| NFA_Deactivate (FALSE); |
| } |
| break; |
| |
| case NFA_DEACTIVATE_FAIL_EVT: |
| ALOGD("%s: NFA_DEACTIVATE_FAIL_EVT: status = %d", __FUNCTION__, eventData->status); |
| break; |
| |
| case NFA_ACTIVATED_EVT: // NFC link/protocol activated |
| ALOGD("%s: NFA_ACTIVATED_EVT: gIsSelectingRfInterface=%d, sIsDisabling=%d", __FUNCTION__, gIsSelectingRfInterface, sIsDisabling); |
| if (sIsDisabling) |
| break; |
| |
| NfcTag::getInstance().setActivationState (); |
| if (gIsSelectingRfInterface) |
| { |
| nativeNfcTag_doConnectStatus(true); |
| break; |
| } |
| |
| nativeNfcTag_resetPresenceCheck(); |
| if (isPeerToPeer(eventData->activated)) |
| { |
| sP2pActive = true; |
| ALOGD("%s: NFA_ACTIVATED_EVT; is p2p", __FUNCTION__); |
| // Disable RF field events in case of p2p |
| UINT8 nfa_disable_rf_events[] = { 0x00 }; |
| ALOGD ("%s: Disabling RF field events", __FUNCTION__); |
| status = NFA_SetConfig(NCI_PARAM_ID_RF_FIELD_INFO, sizeof(nfa_disable_rf_events), |
| &nfa_disable_rf_events[0]); |
| if (status == NFA_STATUS_OK) { |
| ALOGD ("%s: Disabled RF field events", __FUNCTION__); |
| } else { |
| ALOGE ("%s: Failed to disable RF field events", __FUNCTION__); |
| } |
| } |
| else if (pn544InteropIsBusy() == false) |
| { |
| NfcTag::getInstance().connectionEventHandler (connEvent, eventData); |
| |
| // We know it is not activating for P2P. If it activated in |
| // listen mode then it is likely for and SE transaction. |
| // Send the RF Event. |
| if (isListenMode(eventData->activated)) |
| { |
| sSeRfActive = true; |
| SecureElement::getInstance().notifyListenModeState (true); |
| } |
| } |
| |
| break; |
| |
| case NFA_DEACTIVATED_EVT: // NFC link/protocol deactivated |
| ALOGD("%s: NFA_DEACTIVATED_EVT Type: %u, gIsTagDeactivating: %d", __FUNCTION__, eventData->deactivated.type,gIsTagDeactivating); |
| NfcTag::getInstance().setDeactivationState (eventData->deactivated); |
| if (eventData->deactivated.type != NFA_DEACTIVATE_TYPE_SLEEP) |
| { |
| nativeNfcTag_resetPresenceCheck(); |
| NfcTag::getInstance().connectionEventHandler (connEvent, eventData); |
| nativeNfcTag_abortWaits(); |
| NfcTag::getInstance().abort (); |
| } |
| else if (gIsTagDeactivating) |
| { |
| nativeNfcTag_doDeactivateStatus(0); |
| } |
| |
| // If RF is activated for what we think is a Secure Element transaction |
| // and it is deactivated to either IDLE or DISCOVERY mode, notify w/event. |
| if ((eventData->deactivated.type == NFA_DEACTIVATE_TYPE_IDLE) |
| || (eventData->deactivated.type == NFA_DEACTIVATE_TYPE_DISCOVERY)) |
| { |
| if (sSeRfActive) { |
| sSeRfActive = false; |
| SecureElement::getInstance().notifyListenModeState (false); |
| } else if (sP2pActive) { |
| sP2pActive = false; |
| // Make sure RF field events are re-enabled |
| ALOGD("%s: NFA_ACTIVATED_EVT; is p2p", __FUNCTION__); |
| // Disable RF field events in case of p2p |
| UINT8 nfa_enable_rf_events[] = { 0x01 }; |
| |
| ALOGD ("%s: Enabling RF field events", __FUNCTION__); |
| status = NFA_SetConfig(NCI_PARAM_ID_RF_FIELD_INFO, sizeof(nfa_enable_rf_events), |
| &nfa_enable_rf_events[0]); |
| if (status == NFA_STATUS_OK) { |
| ALOGD ("%s: Enabled RF field events", __FUNCTION__); |
| } else { |
| ALOGE ("%s: Failed to enable RF field events", __FUNCTION__); |
| } |
| } |
| } |
| |
| break; |
| |
| case NFA_TLV_DETECT_EVT: // TLV Detection complete |
| status = eventData->tlv_detect.status; |
| ALOGD("%s: NFA_TLV_DETECT_EVT: status = %d, protocol = %d, num_tlvs = %d, num_bytes = %d", |
| __FUNCTION__, status, eventData->tlv_detect.protocol, |
| eventData->tlv_detect.num_tlvs, eventData->tlv_detect.num_bytes); |
| if (status != NFA_STATUS_OK) |
| { |
| ALOGE("%s: NFA_TLV_DETECT_EVT error: status = %d", __FUNCTION__, status); |
| } |
| break; |
| |
| case NFA_NDEF_DETECT_EVT: // NDEF Detection complete; |
| //if status is failure, it means the tag does not contain any or valid NDEF data; |
| //pass the failure status to the NFC Service; |
| status = eventData->ndef_detect.status; |
| ALOGD("%s: NFA_NDEF_DETECT_EVT: status = 0x%X, protocol = %u, " |
| "max_size = %lu, cur_size = %lu, flags = 0x%X", __FUNCTION__, |
| status, |
| eventData->ndef_detect.protocol, eventData->ndef_detect.max_size, |
| eventData->ndef_detect.cur_size, eventData->ndef_detect.flags); |
| NfcTag::getInstance().connectionEventHandler (connEvent, eventData); |
| nativeNfcTag_doCheckNdefResult(status, |
| eventData->ndef_detect.max_size, eventData->ndef_detect.cur_size, |
| eventData->ndef_detect.flags); |
| break; |
| |
| case NFA_DATA_EVT: // Data message received (for non-NDEF reads) |
| ALOGD("%s: NFA_DATA_EVT: len = %d", __FUNCTION__, eventData->data.len); |
| nativeNfcTag_doTransceiveStatus(eventData->data.p_data,eventData->data.len); |
| break; |
| |
| case NFA_SELECT_CPLT_EVT: // Select completed |
| status = eventData->status; |
| ALOGD("%s: NFA_SELECT_CPLT_EVT: status = %d", __FUNCTION__, status); |
| if (status != NFA_STATUS_OK) |
| { |
| ALOGE("%s: NFA_SELECT_CPLT_EVT error: status = %d", __FUNCTION__, status); |
| } |
| break; |
| |
| case NFA_READ_CPLT_EVT: // NDEF-read or tag-specific-read completed |
| ALOGD("%s: NFA_READ_CPLT_EVT: status = 0x%X", __FUNCTION__, eventData->status); |
| nativeNfcTag_doReadCompleted (eventData->status); |
| NfcTag::getInstance().connectionEventHandler (connEvent, eventData); |
| break; |
| |
| case NFA_WRITE_CPLT_EVT: // Write completed |
| ALOGD("%s: NFA_WRITE_CPLT_EVT: status = %d", __FUNCTION__, eventData->status); |
| nativeNfcTag_doWriteStatus (eventData->status == NFA_STATUS_OK); |
| break; |
| |
| case NFA_SET_TAG_RO_EVT: // Tag set as Read only |
| ALOGD("%s: NFA_SET_TAG_RO_EVT: status = %d", __FUNCTION__, eventData->status); |
| nativeNfcTag_doMakeReadonlyResult(eventData->status); |
| break; |
| |
| case NFA_CE_NDEF_WRITE_START_EVT: // NDEF write started |
| ALOGD("%s: NFA_CE_NDEF_WRITE_START_EVT: status: %d", __FUNCTION__, eventData->status); |
| |
| if (eventData->status != NFA_STATUS_OK) |
| ALOGE("%s: NFA_CE_NDEF_WRITE_START_EVT error: status = %d", __FUNCTION__, eventData->status); |
| break; |
| |
| case NFA_CE_NDEF_WRITE_CPLT_EVT: // NDEF write completed |
| ALOGD("%s: FA_CE_NDEF_WRITE_CPLT_EVT: len = %lu", __FUNCTION__, eventData->ndef_write_cplt.len); |
| break; |
| |
| case NFA_LLCP_ACTIVATED_EVT: // LLCP link is activated |
| ALOGD("%s: NFA_LLCP_ACTIVATED_EVT: is_initiator: %d remote_wks: %d, remote_lsc: %d, remote_link_miu: %d, local_link_miu: %d", |
| __FUNCTION__, |
| eventData->llcp_activated.is_initiator, |
| eventData->llcp_activated.remote_wks, |
| eventData->llcp_activated.remote_lsc, |
| eventData->llcp_activated.remote_link_miu, |
| eventData->llcp_activated.local_link_miu); |
| |
| PeerToPeer::getInstance().llcpActivatedHandler (getNative(0, 0), eventData->llcp_activated); |
| break; |
| |
| case NFA_LLCP_DEACTIVATED_EVT: // LLCP link is deactivated |
| ALOGD("%s: NFA_LLCP_DEACTIVATED_EVT", __FUNCTION__); |
| PeerToPeer::getInstance().llcpDeactivatedHandler (getNative(0, 0), eventData->llcp_deactivated); |
| break; |
| |
| case NFA_PRESENCE_CHECK_EVT: |
| ALOGD("%s: NFA_PRESENCE_CHECK_EVT", __FUNCTION__); |
| nativeNfcTag_doPresenceCheckResult (eventData->status); |
| break; |
| |
| case NFA_FORMAT_CPLT_EVT: |
| ALOGD("%s: NFA_FORMAT_CPLT_EVT: status=0x%X", __FUNCTION__, eventData->status); |
| nativeNfcTag_formatStatus (eventData->status == NFA_STATUS_OK); |
| break; |
| |
| case NFA_I93_CMD_CPLT_EVT: |
| ALOGD("%s: NFA_I93_CMD_CPLT_EVT: status=0x%X", __FUNCTION__, eventData->status); |
| break; |
| |
| case NFA_CE_UICC_LISTEN_CONFIGURED_EVT : |
| ALOGD("%s: NFA_CE_UICC_LISTEN_CONFIGURED_EVT : status=0x%X", __FUNCTION__, eventData->status); |
| SecureElement::getInstance().connectionEventHandler (connEvent, eventData); |
| break; |
| |
| case NFA_SET_P2P_LISTEN_TECH_EVT: |
| ALOGD("%s: NFA_SET_P2P_LISTEN_TECH_EVT", __FUNCTION__); |
| PeerToPeer::getInstance().connectionEventHandler (connEvent, eventData); |
| break; |
| |
| default: |
| ALOGE("%s: unknown event ????", __FUNCTION__); |
| break; |
| } |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: nfcManager_initNativeStruc |
| ** |
| ** Description: Initialize variables. |
| ** e: JVM environment. |
| ** o: Java object. |
| ** |
| ** Returns: True if ok. |
| ** |
| *******************************************************************************/ |
| static jboolean nfcManager_initNativeStruc (JNIEnv* e, jobject o) |
| { |
| nfc_jni_native_data* nat = NULL; |
| jclass cls = NULL; |
| jobject obj = NULL; |
| jfieldID f = 0; |
| |
| ALOGD ("%s: enter", __FUNCTION__); |
| |
| nat = (nfc_jni_native_data*)malloc(sizeof(struct nfc_jni_native_data)); |
| if (nat == NULL) |
| { |
| ALOGE ("%s: fail allocate native data", __FUNCTION__); |
| return JNI_FALSE; |
| } |
| |
| memset (nat, 0, sizeof(*nat)); |
| e->GetJavaVM (&(nat->vm)); |
| nat->env_version = e->GetVersion (); |
| nat->manager = e->NewGlobalRef (o); |
| |
| cls = e->GetObjectClass (o); |
| f = e->GetFieldID (cls, "mNative", "I"); |
| e->SetIntField (o, f, (jint)nat); |
| |
| /* Initialize native cached references */ |
| gCachedNfcManagerNotifyNdefMessageListeners = e->GetMethodID (cls, |
| "notifyNdefMessageListeners", "(Lcom/android/nfc/dhimpl/NativeNfcTag;)V"); |
| gCachedNfcManagerNotifyTransactionListeners = e->GetMethodID (cls, |
| "notifyTransactionListeners", "([B)V"); |
| gCachedNfcManagerNotifyLlcpLinkActivation = e->GetMethodID (cls, |
| "notifyLlcpLinkActivation", "(Lcom/android/nfc/dhimpl/NativeP2pDevice;)V"); |
| gCachedNfcManagerNotifyLlcpLinkDeactivated = e->GetMethodID (cls, |
| "notifyLlcpLinkDeactivated", "(Lcom/android/nfc/dhimpl/NativeP2pDevice;)V"); |
| sCachedNfcManagerNotifyTargetDeselected = e->GetMethodID (cls, |
| "notifyTargetDeselected","()V"); |
| gCachedNfcManagerNotifySeFieldActivated = e->GetMethodID (cls, |
| "notifySeFieldActivated", "()V"); |
| gCachedNfcManagerNotifySeFieldDeactivated = e->GetMethodID (cls, |
| "notifySeFieldDeactivated", "()V"); |
| gCachedNfcManagerNotifySeListenActivated = e->GetMethodID (cls, |
| "notifySeListenActivated", "()V"); |
| gCachedNfcManagerNotifySeListenDeactivated = e->GetMethodID (cls, |
| "notifySeListenDeactivated", "()V"); |
| |
| sCachedNfcManagerNotifySeApduReceived = e->GetMethodID(cls, |
| "notifySeApduReceived", "([B)V"); |
| |
| sCachedNfcManagerNotifySeMifareAccess = e->GetMethodID(cls, |
| "notifySeMifareAccess", "([B)V"); |
| |
| sCachedNfcManagerNotifySeEmvCardRemoval = e->GetMethodID(cls, |
| "notifySeEmvCardRemoval", "()V"); |
| |
| if (nfc_jni_cache_object(e,gNativeNfcTagClassName, &(nat->cached_NfcTag)) == -1) |
| { |
| ALOGE ("%s: fail cache NativeNfcTag", __FUNCTION__); |
| return JNI_FALSE; |
| } |
| |
| if (nfc_jni_cache_object(e,gNativeP2pDeviceClassName, &(nat->cached_P2pDevice)) == -1) |
| { |
| ALOGE ("%s: fail cache NativeP2pDevice", __FUNCTION__); |
| return JNI_FALSE; |
| } |
| |
| ALOGD ("%s: exit", __FUNCTION__); |
| return JNI_TRUE; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: nfaDeviceManagementCallback |
| ** |
| ** Description: Receive device management events from stack. |
| ** dmEvent: Device-management event ID. |
| ** eventData: Data associated with event ID. |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| void nfaDeviceManagementCallback (UINT8 dmEvent, tNFA_DM_CBACK_DATA* eventData) |
| { |
| ALOGD ("%s: enter; event=0x%X", __FUNCTION__, dmEvent); |
| |
| switch (dmEvent) |
| { |
| case NFA_DM_ENABLE_EVT: /* Result of NFA_Enable */ |
| { |
| SyncEventGuard guard (sNfaEnableEvent); |
| ALOGD ("%s: NFA_DM_ENABLE_EVT; status=0x%X", |
| __FUNCTION__, eventData->status); |
| sIsNfaEnabled = eventData->status == NFA_STATUS_OK; |
| sIsDisabling = false; |
| sNfaEnableEvent.notifyOne (); |
| } |
| break; |
| |
| case NFA_DM_DISABLE_EVT: /* Result of NFA_Disable */ |
| { |
| SyncEventGuard guard (sNfaDisableEvent); |
| ALOGD ("%s: NFA_DM_DISABLE_EVT", __FUNCTION__); |
| sIsNfaEnabled = false; |
| sIsDisabling = false; |
| sNfaDisableEvent.notifyOne (); |
| } |
| break; |
| |
| case NFA_DM_SET_CONFIG_EVT: //result of NFA_SetConfig |
| ALOGD ("%s: NFA_DM_SET_CONFIG_EVT", __FUNCTION__); |
| { |
| SyncEventGuard guard (sNfaSetConfigEvent); |
| sNfaSetConfigEvent.notifyOne(); |
| } |
| break; |
| |
| case NFA_DM_GET_CONFIG_EVT: /* Result of NFA_GetConfig */ |
| ALOGD ("%s: NFA_DM_GET_CONFIG_EVT", __FUNCTION__); |
| break; |
| |
| case NFA_DM_RF_FIELD_EVT: |
| ALOGD ("%s: NFA_DM_RF_FIELD_EVT; status=0x%X; field status=%u", __FUNCTION__, |
| eventData->rf_field.status, eventData->rf_field.rf_field_status); |
| |
| if (!sIsDisabling && eventData->rf_field.status == NFA_STATUS_OK) |
| SecureElement::getInstance().notifyRfFieldEvent (eventData->rf_field.rf_field_status == NFA_DM_RF_FIELD_ON); |
| break; |
| |
| case NFA_DM_NFCC_TRANSPORT_ERR_EVT: |
| case NFA_DM_NFCC_TIMEOUT_EVT: |
| { |
| if (dmEvent == NFA_DM_NFCC_TIMEOUT_EVT) |
| ALOGD ("%s: NFA_DM_NFCC_TIMEOUT_EVT; abort all outstanding operations", __FUNCTION__); |
| else |
| ALOGD ("%s: NFA_DM_NFCC_TRANSPORT_ERR_EVT; abort all outstanding operations", __FUNCTION__); |
| |
| nativeNfcTag_abortWaits(); |
| NfcTag::getInstance().abort (); |
| sAbortConnlessWait = true; |
| nativeLlcpConnectionlessSocket_abortWait(); |
| { |
| ALOGD ("%s: aborting sNfaEnableDisablePollingEvent", __FUNCTION__); |
| SyncEventGuard guard (sNfaEnableDisablePollingEvent); |
| sNfaEnableDisablePollingEvent.notifyOne(); |
| } |
| { |
| ALOGD ("%s: aborting sNfaEnableEvent", __FUNCTION__); |
| SyncEventGuard guard (sNfaEnableEvent); |
| sNfaEnableEvent.notifyOne(); |
| } |
| { |
| ALOGD ("%s: aborting sNfaDisableEvent", __FUNCTION__); |
| SyncEventGuard guard (sNfaDisableEvent); |
| sNfaDisableEvent.notifyOne(); |
| } |
| sDiscoveryEnabled = false; |
| PowerSwitch::getInstance ().abort (); |
| |
| if (!sIsDisabling && sIsNfaEnabled) |
| { |
| NFA_Disable(FALSE); |
| sIsDisabling = true; |
| } |
| else |
| { |
| sIsNfaEnabled = false; |
| sIsDisabling = false; |
| } |
| PowerSwitch::getInstance ().initialize (PowerSwitch::UNKNOWN_LEVEL); |
| ALOGD ("%s: aborted all waiting events", __FUNCTION__); |
| } |
| break; |
| |
| case NFA_DM_PWR_MODE_CHANGE_EVT: |
| PowerSwitch::getInstance ().deviceManagementCallback (dmEvent, eventData); |
| break; |
| |
| default: |
| ALOGD ("%s: unhandled event", __FUNCTION__); |
| break; |
| } |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: nfcManager_doInitialize |
| ** |
| ** Description: Turn on NFC. |
| ** e: JVM environment. |
| ** o: Java object. |
| ** |
| ** Returns: True if ok. |
| ** |
| *******************************************************************************/ |
| static jboolean nfcManager_doInitialize (JNIEnv* e, jobject o) |
| { |
| ALOGD ("%s: enter; NCI_VERSION=0x%02X", __FUNCTION__, NCI_VERSION); |
| tNFA_STATUS stat = NFA_STATUS_OK; |
| |
| if (sIsNfaEnabled) |
| { |
| ALOGD ("%s: already enabled", __FUNCTION__); |
| goto TheEnd; |
| } |
| |
| PowerSwitch::getInstance ().initialize (PowerSwitch::FULL_POWER); |
| |
| { |
| unsigned long num = 0; |
| |
| NfcAdaptation& theInstance = NfcAdaptation::GetInstance(); |
| theInstance.Initialize(); //start GKI, NCI task, NFC task |
| |
| { |
| SyncEventGuard guard (sNfaEnableEvent); |
| tHAL_NFC_ENTRY* halFuncEntries = theInstance.GetHalEntryFuncs (); |
| |
| NFA_Init (halFuncEntries); |
| |
| stat = NFA_Enable (nfaDeviceManagementCallback, nfaConnectionCallback); |
| if (stat == NFA_STATUS_OK) |
| { |
| num = initializeGlobalAppLogLevel (); |
| CE_SetTraceLevel (num); |
| LLCP_SetTraceLevel (num); |
| NFC_SetTraceLevel (num); |
| RW_SetTraceLevel (num); |
| NFA_SetTraceLevel (num); |
| NFA_ChoSetTraceLevel (num); |
| NFA_P2pSetTraceLevel (num); |
| NFA_SnepSetTraceLevel (num); |
| sNfaEnableEvent.wait(); //wait for NFA command to finish |
| } |
| } |
| |
| if (stat == NFA_STATUS_OK) |
| { |
| //sIsNfaEnabled indicates whether stack started successfully |
| if (sIsNfaEnabled) |
| { |
| SecureElement::getInstance().initialize (getNative(e, o)); |
| nativeNfcTag_registerNdefTypeHandler (); |
| NfcTag::getInstance().initialize (getNative(e, o)); |
| PeerToPeer::getInstance().initialize (); |
| PeerToPeer::getInstance().handleNfcOnOff (true); |
| |
| ///////////////////////////////////////////////////////////////////////////////// |
| // Add extra configuration here (work-arounds, etc.) |
| |
| struct nfc_jni_native_data *nat = getNative(e, o); |
| |
| if ( nat ) |
| { |
| if (GetNumValue(NAME_POLLING_TECH_MASK, &num, sizeof(num))) |
| nat->tech_mask = num; |
| else |
| nat->tech_mask = DEFAULT_TECH_MASK; |
| |
| ALOGD ("%s: tag polling tech mask=0x%X", __FUNCTION__, nat->tech_mask); |
| } |
| |
| // Always restore LPTD Configuration to the stack default. |
| if (sOriginalLptdCfg != NULL) |
| p_nfa_dm_lptd_cfg = sOriginalLptdCfg; |
| |
| // if this value exists, set polling interval. |
| if (GetNumValue(NAME_NFA_DM_DISC_DURATION_POLL, &num, sizeof(num))) |
| NFA_SetRfDiscoveryDuration(num); |
| |
| // Do custom NFCA startup configuration. |
| doStartupConfig(); |
| goto TheEnd; |
| } |
| } |
| |
| ALOGE ("%s: fail nfa enable; error=0x%X", __FUNCTION__, stat); |
| |
| if (sIsNfaEnabled) |
| stat = NFA_Disable (FALSE /* ungraceful */); |
| |
| theInstance.Finalize(); |
| } |
| |
| TheEnd: |
| if (sIsNfaEnabled) |
| PowerSwitch::getInstance ().setLevel (PowerSwitch::LOW_POWER); |
| ALOGD ("%s: exit", __FUNCTION__); |
| return sIsNfaEnabled ? JNI_TRUE : JNI_FALSE; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: nfcManager_enableDiscovery |
| ** |
| ** Description: Start polling and listening for devices. |
| ** e: JVM environment. |
| ** o: Java object. |
| ** mode: Not used. |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| static void nfcManager_enableDiscovery (JNIEnv* e, jobject o) |
| { |
| tNFA_TECHNOLOGY_MASK tech_mask = DEFAULT_TECH_MASK; |
| struct nfc_jni_native_data *nat = getNative(e, o); |
| |
| if (nat) |
| tech_mask = (tNFA_TECHNOLOGY_MASK)nat->tech_mask; |
| |
| ALOGD ("%s: enter; tech_mask = %02x", __FUNCTION__, tech_mask); |
| |
| if (sDiscoveryEnabled) |
| { |
| ALOGE ("%s: already polling", __FUNCTION__); |
| return; |
| } |
| |
| tNFA_STATUS stat = NFA_STATUS_OK; |
| |
| ALOGD ("%s: sIsSecElemSelected=%u", __FUNCTION__, sIsSecElemSelected); |
| |
| PowerSwitch::getInstance ().setLevel (PowerSwitch::FULL_POWER); |
| |
| if (sRfEnabled) { |
| // Stop RF discovery to reconfigure |
| startRfDiscovery(false); |
| } |
| |
| { |
| SyncEventGuard guard (sNfaEnableDisablePollingEvent); |
| stat = NFA_EnablePolling (tech_mask); |
| if (stat == NFA_STATUS_OK) |
| { |
| ALOGD ("%s: wait for enable event", __FUNCTION__); |
| sDiscoveryEnabled = true; |
| sNfaEnableDisablePollingEvent.wait (); //wait for NFA_POLL_ENABLED_EVT |
| ALOGD ("%s: got enabled event", __FUNCTION__); |
| } |
| else |
| { |
| ALOGE ("%s: fail enable discovery; error=0x%X", __FUNCTION__, stat); |
| } |
| } |
| |
| // Start P2P listening if tag polling was enabled or the mask was 0. |
| if (sDiscoveryEnabled || (tech_mask == 0)) |
| { |
| ALOGD ("%s: Enable p2pListening", __FUNCTION__); |
| PeerToPeer::getInstance().enableP2pListening (true); |
| |
| //if NFC service has deselected the sec elem, then apply default routes |
| if (!sIsSecElemSelected) |
| stat = SecureElement::getInstance().routeToDefault (); |
| } |
| |
| // Actually start discovery. |
| startRfDiscovery (true); |
| |
| PowerSwitch::getInstance ().setModeOn (PowerSwitch::DISCOVERY); |
| |
| ALOGD ("%s: exit", __FUNCTION__); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: nfcManager_disableDiscovery |
| ** |
| ** Description: Stop polling and listening for devices. |
| ** e: JVM environment. |
| ** o: Java object. |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| void nfcManager_disableDiscovery (JNIEnv* e, jobject o) |
| { |
| tNFA_STATUS status = NFA_STATUS_OK; |
| ALOGD ("%s: enter;", __FUNCTION__); |
| |
| pn544InteropAbortNow (); |
| if (sDiscoveryEnabled == false) |
| { |
| ALOGD ("%s: already disabled", __FUNCTION__); |
| goto TheEnd; |
| } |
| |
| // Stop RF Discovery. |
| startRfDiscovery (false); |
| |
| if (sDiscoveryEnabled) |
| { |
| SyncEventGuard guard (sNfaEnableDisablePollingEvent); |
| status = NFA_DisablePolling (); |
| if (status == NFA_STATUS_OK) |
| { |
| sDiscoveryEnabled = false; |
| sNfaEnableDisablePollingEvent.wait (); //wait for NFA_POLL_DISABLED_EVT |
| } |
| else |
| ALOGE ("%s: Failed to disable polling; error=0x%X", __FUNCTION__, status); |
| } |
| |
| PeerToPeer::getInstance().enableP2pListening (false); |
| |
| //if nothing is active after this, then tell the controller to power down |
| if (! PowerSwitch::getInstance ().setModeOff (PowerSwitch::DISCOVERY)) |
| PowerSwitch::getInstance ().setLevel (PowerSwitch::LOW_POWER); |
| |
| TheEnd: |
| ALOGD ("%s: exit", __FUNCTION__); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function nfc_jni_cache_object_local |
| ** |
| ** Description Allocates a java object and calls it's constructor |
| ** |
| ** Returns -1 on failure, 0 on success |
| ** |
| *******************************************************************************/ |
| int nfc_jni_cache_object_local (JNIEnv *e, const char *className, jobject *cachedObj) |
| { |
| jclass cls = NULL; |
| jobject obj = NULL; |
| jmethodID ctor = 0; |
| |
| cls = e->FindClass (className); |
| if(cls == NULL) |
| { |
| ALOGE ("%s: find class error", __FUNCTION__); |
| return -1; |
| } |
| |
| ctor = e->GetMethodID (cls, "<init>", "()V"); |
| obj = e->NewObject (cls, ctor); |
| if (obj == NULL) |
| { |
| ALOGE ("%s: create object error", __FUNCTION__); |
| return -1; |
| } |
| |
| *cachedObj = e->NewLocalRef (obj); |
| if (*cachedObj == NULL) |
| { |
| e->DeleteLocalRef (obj); |
| ALOGE ("%s: global ref error", __FUNCTION__); |
| return -1; |
| } |
| e->DeleteLocalRef (obj); |
| return 0; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: nfcManager_doCreateLlcpServiceSocket |
| ** |
| ** Description: Create a new LLCP server socket. |
| ** e: JVM environment. |
| ** o: Java object. |
| ** nSap: Service access point. |
| ** sn: Service name |
| ** miu: Maximum information unit. |
| ** rw: Receive window size. |
| ** linearBufferLength: Max buffer size. |
| ** |
| ** Returns: NativeLlcpServiceSocket Java object. |
| ** |
| *******************************************************************************/ |
| static jobject nfcManager_doCreateLlcpServiceSocket (JNIEnv* e, jobject o, jint nSap, jstring sn, jint miu, jint rw, jint linearBufferLength) |
| { |
| bool stat = false; |
| jobject serviceSocket = NULL; |
| jclass clsNativeLlcpServiceSocket = NULL; |
| jfieldID f = 0; |
| PeerToPeer::tJNI_HANDLE jniHandle = PeerToPeer::getInstance().getNewJniHandle (); |
| const char* serviceName = e->GetStringUTFChars (sn, JNI_FALSE); //convert jstring, which is unicode, into char* |
| std::string serviceName2 (serviceName); |
| |
| e->ReleaseStringUTFChars (sn, serviceName); //free the string |
| ALOGD ("%s: enter: sap=%i; name=%s; miu=%i; rw=%i; buffLen=%i", __FUNCTION__, nSap, serviceName2.c_str(), miu, rw, linearBufferLength); |
| |
| /* Create new NativeLlcpServiceSocket object */ |
| if (nfc_jni_cache_object(e, gNativeLlcpServiceSocketClassName, &(serviceSocket)) == -1) |
| { |
| ALOGE ("%s: Llcp socket object creation error", __FUNCTION__); |
| return NULL; |
| } |
| |
| /* Get NativeLlcpServiceSocket class object */ |
| clsNativeLlcpServiceSocket = e->GetObjectClass (serviceSocket); |
| if (e->ExceptionCheck()) |
| { |
| e->ExceptionClear(); |
| ALOGE("%s: Llcp Socket get object class error", __FUNCTION__); |
| return NULL; |
| } |
| |
| if (!PeerToPeer::getInstance().registerServer (jniHandle, serviceName2.c_str())) |
| { |
| ALOGE("%s: RegisterServer error", __FUNCTION__); |
| return NULL; |
| } |
| |
| /* Set socket handle to be the same as the NfaHandle*/ |
| f = e->GetFieldID (clsNativeLlcpServiceSocket, "mHandle", "I"); |
| e->SetIntField (serviceSocket, f, (jint) jniHandle); |
| ALOGD ("%s: socket Handle = 0x%X", __FUNCTION__, jniHandle); |
| |
| /* Set socket linear buffer length */ |
| f = e->GetFieldID (clsNativeLlcpServiceSocket, "mLocalLinearBufferLength", "I"); |
| e->SetIntField (serviceSocket, f,(jint)linearBufferLength); |
| ALOGD ("%s: buffer length = %d", __FUNCTION__, linearBufferLength); |
| |
| /* Set socket MIU */ |
| f = e->GetFieldID (clsNativeLlcpServiceSocket, "mLocalMiu", "I"); |
| e->SetIntField (serviceSocket, f,(jint)miu); |
| ALOGD ("%s: MIU = %d", __FUNCTION__, miu); |
| |
| /* Set socket RW */ |
| f = e->GetFieldID (clsNativeLlcpServiceSocket, "mLocalRw", "I"); |
| e->SetIntField (serviceSocket, f,(jint)rw); |
| ALOGD ("%s: RW = %d", __FUNCTION__, rw); |
| |
| sLastError = 0; |
| ALOGD ("%s: exit", __FUNCTION__); |
| return serviceSocket; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: nfcManager_doGetLastError |
| ** |
| ** Description: Get the last error code. |
| ** e: JVM environment. |
| ** o: Java object. |
| ** |
| ** Returns: Last error code. |
| ** |
| *******************************************************************************/ |
| static jint nfcManager_doGetLastError(JNIEnv* e, jobject o) |
| { |
| ALOGD ("%s: last error=%i", __FUNCTION__, sLastError); |
| return sLastError; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: nfcManager_doDeinitialize |
| ** |
| ** Description: Turn off NFC. |
| ** e: JVM environment. |
| ** o: Java object. |
| ** |
| ** Returns: True if ok. |
| ** |
| *******************************************************************************/ |
| static jboolean nfcManager_doDeinitialize (JNIEnv* e, jobject o) |
| { |
| ALOGD ("%s: enter", __FUNCTION__); |
| |
| sIsDisabling = true; |
| pn544InteropAbortNow (); |
| SecureElement::getInstance().finalize (); |
| |
| if (sIsNfaEnabled) |
| { |
| SyncEventGuard guard (sNfaDisableEvent); |
| tNFA_STATUS stat = NFA_Disable (TRUE /* graceful */); |
| if (stat == NFA_STATUS_OK) |
| { |
| ALOGD ("%s: wait for completion", __FUNCTION__); |
| sNfaDisableEvent.wait (); //wait for NFA command to finish |
| PeerToPeer::getInstance ().handleNfcOnOff (false); |
| } |
| else |
| { |
| ALOGE ("%s: fail disable; error=0x%X", __FUNCTION__, stat); |
| } |
| } |
| nativeNfcTag_abortWaits(); |
| NfcTag::getInstance().abort (); |
| sAbortConnlessWait = true; |
| nativeLlcpConnectionlessSocket_abortWait(); |
| sIsNfaEnabled = false; |
| sDiscoveryEnabled = false; |
| sIsDisabling = false; |
| sIsSecElemSelected = false; |
| |
| { |
| //unblock NFA_EnablePolling() and NFA_DisablePolling() |
| SyncEventGuard guard (sNfaEnableDisablePollingEvent); |
| sNfaEnableDisablePollingEvent.notifyOne (); |
| } |
| |
| NfcAdaptation& theInstance = NfcAdaptation::GetInstance(); |
| theInstance.Finalize(); |
| |
| ALOGD ("%s: exit", __FUNCTION__); |
| return JNI_TRUE; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: nfcManager_doCreateLlcpSocket |
| ** |
| ** Description: Create a LLCP connection-oriented socket. |
| ** e: JVM environment. |
| ** o: Java object. |
| ** nSap: Service access point. |
| ** miu: Maximum information unit. |
| ** rw: Receive window size. |
| ** linearBufferLength: Max buffer size. |
| ** |
| ** Returns: NativeLlcpSocket Java object. |
| ** |
| *******************************************************************************/ |
| static jobject nfcManager_doCreateLlcpSocket (JNIEnv* e, jobject o, jint nSap, jint miu, jint rw, jint linearBufferLength) |
| { |
| ALOGD ("%s: enter; sap=%d; miu=%d; rw=%d; buffer len=%d", __FUNCTION__, nSap, miu, rw, linearBufferLength); |
| jobject clientSocket = NULL; |
| jclass clsNativeLlcpSocket; |
| jfieldID f; |
| PeerToPeer::tJNI_HANDLE jniHandle = PeerToPeer::getInstance().getNewJniHandle (); |
| bool stat = false; |
| |
| stat = PeerToPeer::getInstance().createClient (jniHandle, miu, rw); |
| |
| /* Create new NativeLlcpSocket object */ |
| if (nfc_jni_cache_object_local(e, gNativeLlcpSocketClassName, &(clientSocket)) == -1) |
| { |
| ALOGE ("%s: fail Llcp socket creation", __FUNCTION__); |
| goto TheEnd; |
| } |
| |
| /* Get NativeConnectionless class object */ |
| clsNativeLlcpSocket = e->GetObjectClass (clientSocket); |
| if (e->ExceptionCheck()) |
| { |
| e->ExceptionClear(); |
| ALOGE ("%s: fail get class object", __FUNCTION__); |
| goto TheEnd; |
| } |
| |
| /* Set socket SAP */ |
| f = e->GetFieldID (clsNativeLlcpSocket, "mSap", "I"); |
| e->SetIntField (clientSocket, f, (jint) nSap); |
| |
| /* Set socket handle */ |
| f = e->GetFieldID (clsNativeLlcpSocket, "mHandle", "I"); |
| e->SetIntField (clientSocket, f, (jint) jniHandle); |
| |
| /* Set socket MIU */ |
| f = e->GetFieldID (clsNativeLlcpSocket, "mLocalMiu", "I"); |
| e->SetIntField (clientSocket, f, (jint) miu); |
| |
| /* Set socket RW */ |
| f = e->GetFieldID (clsNativeLlcpSocket, "mLocalRw", "I"); |
| e->SetIntField (clientSocket, f, (jint) rw); |
| |
| TheEnd: |
| ALOGD ("%s: exit", __FUNCTION__); |
| return clientSocket; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: nfcManager_doCreateLlcpConnectionlessSocket |
| ** |
| ** Description: Create a connection-less socket. |
| ** e: JVM environment. |
| ** o: Java object. |
| ** nSap: Service access point. |
| ** sn: Service name. |
| ** |
| ** Returns: NativeLlcpConnectionlessSocket Java object. |
| ** |
| *******************************************************************************/ |
| static jobject nfcManager_doCreateLlcpConnectionlessSocket (JNIEnv *e, jobject o, jint nSap, jstring sn) |
| { |
| ALOGD ("%s: nSap=0x%X", __FUNCTION__, nSap); |
| return NULL; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: nfcManager_doGetSecureElementList |
| ** |
| ** Description: Get a list of secure element handles. |
| ** e: JVM environment. |
| ** o: Java object. |
| ** |
| ** Returns: List of secure element handles. |
| ** |
| *******************************************************************************/ |
| static jintArray nfcManager_doGetSecureElementList(JNIEnv *e, jobject o) |
| { |
| ALOGD ("%s", __FUNCTION__); |
| return SecureElement::getInstance().getListOfEeHandles (e); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: nfcManager_doSelectSecureElement |
| ** |
| ** Description: NFC controller starts routing data in listen mode. |
| ** e: JVM environment. |
| ** o: Java object. |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| static void nfcManager_doSelectSecureElement(JNIEnv *e, jobject o) |
| { |
| ALOGD ("%s: enter", __FUNCTION__); |
| bool stat = true; |
| |
| PowerSwitch::getInstance ().setLevel (PowerSwitch::FULL_POWER); |
| |
| if (sRfEnabled) { |
| // Stop RF Discovery if we were polling |
| startRfDiscovery (false); |
| } |
| |
| if (sIsSecElemSelected) |
| { |
| ALOGD ("%s: already selected", __FUNCTION__); |
| goto TheEnd; |
| } |
| |
| stat = SecureElement::getInstance().activate (0xABCDEF); |
| if (stat) |
| SecureElement::getInstance().routeToSecureElement (); |
| sIsSecElemSelected = true; |
| |
| TheEnd: |
| startRfDiscovery (true); |
| |
| PowerSwitch::getInstance ().setModeOn (PowerSwitch::SE_ROUTING); |
| |
| ALOGD ("%s: exit", __FUNCTION__); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: nfcManager_doDeselectSecureElement |
| ** |
| ** Description: NFC controller stops routing data in listen mode. |
| ** e: JVM environment. |
| ** o: Java object. |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| static void nfcManager_doDeselectSecureElement(JNIEnv *e, jobject o) |
| { |
| ALOGD ("%s: enter", __FUNCTION__); |
| bool stat = false; |
| bool bRestartDiscovery = false; |
| |
| if (! sIsSecElemSelected) |
| { |
| ALOGE ("%s: already deselected", __FUNCTION__); |
| goto TheEnd; |
| } |
| |
| if (PowerSwitch::getInstance ().getLevel() == PowerSwitch::LOW_POWER) |
| { |
| ALOGD ("%s: do not deselect while power is OFF", __FUNCTION__); |
| sIsSecElemSelected = false; |
| goto TheEnd; |
| } |
| |
| if (sRfEnabled) { |
| // Stop RF Discovery if we were polling |
| startRfDiscovery (false); |
| bRestartDiscovery = true; |
| } |
| |
| stat = SecureElement::getInstance().routeToDefault (); |
| sIsSecElemSelected = false; |
| |
| //if controller is not routing to sec elems AND there is no pipe connected, |
| //then turn off the sec elems |
| if (SecureElement::getInstance().isBusy() == false) |
| SecureElement::getInstance().deactivate (0xABCDEF); |
| |
| TheEnd: |
| if (bRestartDiscovery) |
| startRfDiscovery (true); |
| |
| //if nothing is active after this, then tell the controller to power down |
| if (! PowerSwitch::getInstance ().setModeOff (PowerSwitch::SE_ROUTING)) |
| PowerSwitch::getInstance ().setLevel (PowerSwitch::LOW_POWER); |
| |
| ALOGD ("%s: exit", __FUNCTION__); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: isPeerToPeer |
| ** |
| ** Description: Whether the activation data indicates the peer supports NFC-DEP. |
| ** activated: Activation data. |
| ** |
| ** Returns: True if the peer supports NFC-DEP. |
| ** |
| *******************************************************************************/ |
| static bool isPeerToPeer (tNFA_ACTIVATED& activated) |
| { |
| return activated.activate_ntf.protocol == NFA_PROTOCOL_NFC_DEP; |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function: isListenMode |
| ** |
| ** Description: Indicates whether the activation data indicates it is |
| ** listen mode. |
| ** |
| ** Returns: True if this listen mode. |
| ** |
| *******************************************************************************/ |
| static bool isListenMode(tNFA_ACTIVATED& activated) |
| { |
| return ((NFC_DISCOVERY_TYPE_LISTEN_A == activated.activate_ntf.rf_tech_param.mode) |
| || (NFC_DISCOVERY_TYPE_LISTEN_B == activated.activate_ntf.rf_tech_param.mode) |
| || (NFC_DISCOVERY_TYPE_LISTEN_F == activated.activate_ntf.rf_tech_param.mode) |
| || (NFC_DISCOVERY_TYPE_LISTEN_A_ACTIVE == activated.activate_ntf.rf_tech_param.mode) |
| || (NFC_DISCOVERY_TYPE_LISTEN_F_ACTIVE == activated.activate_ntf.rf_tech_param.mode) |
| || (NFC_DISCOVERY_TYPE_LISTEN_ISO15693 == activated.activate_ntf.rf_tech_param.mode) |
| || (NFC_DISCOVERY_TYPE_LISTEN_B_PRIME == activated.activate_ntf.rf_tech_param.mode)); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function: nfcManager_doCheckLlcp |
| ** |
| ** Description: Not used. |
| ** |
| ** Returns: True |
| ** |
| *******************************************************************************/ |
| static jboolean nfcManager_doCheckLlcp(JNIEnv *e, jobject o) |
| { |
| ALOGD("%s", __FUNCTION__); |
| return JNI_TRUE; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: nfcManager_doActivateLlcp |
| ** |
| ** Description: Not used. |
| ** |
| ** Returns: True |
| ** |
| *******************************************************************************/ |
| static jboolean nfcManager_doActivateLlcp(JNIEnv *e, jobject o) |
| { |
| ALOGD("%s", __FUNCTION__); |
| return JNI_TRUE; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: nfcManager_doAbort |
| ** |
| ** Description: Not used. |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| static void nfcManager_doAbort(JNIEnv *e, jobject o) |
| { |
| ALOGE("%s: abort()", __FUNCTION__); |
| abort(); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: nfcManager_doDownload |
| ** |
| ** Description: Not used. |
| ** |
| ** Returns: True |
| ** |
| *******************************************************************************/ |
| static jboolean nfcManager_doDownload(JNIEnv *e, jobject o) |
| { |
| ALOGD("%s", __FUNCTION__); |
| return JNI_TRUE; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: nfcManager_doResetTimeouts |
| ** |
| ** Description: Not used. |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| static void nfcManager_doResetTimeouts(JNIEnv *e, jobject o) |
| { |
| ALOGD ("%s: %d millisec", __FUNCTION__, DEFAULT_GENERAL_TRANS_TIMEOUT); |
| gGeneralTransceiveTimeout = DEFAULT_GENERAL_TRANS_TIMEOUT; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: nfcManager_doSetTimeout |
| ** |
| ** Description: Set timeout value. |
| ** e: JVM environment. |
| ** o: Java object. |
| ** timeout: Timeout value. |
| ** |
| ** Returns: True if ok. |
| ** |
| *******************************************************************************/ |
| static bool nfcManager_doSetTimeout(JNIEnv *e, jobject o, jint tech, jint timeout) |
| { |
| if (timeout <= 0) |
| { |
| ALOGE("%s: Timeout must be positive.",__FUNCTION__); |
| return false; |
| } |
| |
| ALOGD ("%s: timeout=%d", __FUNCTION__, timeout); |
| gGeneralTransceiveTimeout = timeout; |
| return true; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: nfcManager_doGetTimeout |
| ** |
| ** Description: Get timeout value. |
| ** e: JVM environment. |
| ** o: Java object. |
| ** tech: Not used. |
| ** |
| ** Returns: Timeout value. |
| ** |
| *******************************************************************************/ |
| static jint nfcManager_doGetTimeout(JNIEnv *e, jobject o, jint tech) |
| { |
| ALOGD ("%s: timeout=%d", __FUNCTION__, gGeneralTransceiveTimeout); |
| return gGeneralTransceiveTimeout; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: nfcManager_doDump |
| ** |
| ** Description: Not used. |
| ** e: JVM environment. |
| ** o: Java object. |
| ** |
| ** Returns: Text dump. |
| ** |
| *******************************************************************************/ |
| static jstring nfcManager_doDump(JNIEnv *e, jobject o) |
| { |
| char buffer[100]; |
| snprintf(buffer, sizeof(buffer), "libnfc llc error_count=%u", /*libnfc_llc_error_count*/ 0); |
| return e->NewStringUTF(buffer); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: nfcManager_doSetP2pInitiatorModes |
| ** |
| ** Description: Set P2P initiator's activation modes. |
| ** e: JVM environment. |
| ** o: Java object. |
| ** modes: Active and/or passive modes. The values are specified |
| ** in external/libnfc-nxp/inc/phNfcTypes.h. See |
| ** enum phNfc_eP2PMode_t. |
| ** |
| ** Returns: None. |
| ** |
| *******************************************************************************/ |
| static void nfcManager_doSetP2pInitiatorModes (JNIEnv *e, jobject o, jint modes) |
| { |
| ALOGD ("%s: modes=0x%X", __FUNCTION__, modes); |
| struct nfc_jni_native_data *nat = getNative(e, o); |
| |
| tNFA_TECHNOLOGY_MASK mask = 0; |
| if (modes & 0x01) mask |= NFA_TECHNOLOGY_MASK_A; |
| if (modes & 0x02) mask |= NFA_TECHNOLOGY_MASK_F; |
| if (modes & 0x04) mask |= NFA_TECHNOLOGY_MASK_F; |
| if (modes & 0x08) mask |= NFA_TECHNOLOGY_MASK_A_ACTIVE; |
| if (modes & 0x10) mask |= NFA_TECHNOLOGY_MASK_F_ACTIVE; |
| if (modes & 0x20) mask |= NFA_TECHNOLOGY_MASK_F_ACTIVE; |
| nat->tech_mask = mask; |
| |
| //this function is not called by the NFC service nor exposed by public API. |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: nfcManager_doSetP2pTargetModes |
| ** |
| ** Description: Set P2P target's activation modes. |
| ** e: JVM environment. |
| ** o: Java object. |
| ** modes: Active and/or passive modes. |
| ** |
| ** Returns: None. |
| ** |
| *******************************************************************************/ |
| static void nfcManager_doSetP2pTargetModes (JNIEnv *e, jobject o, jint modes) |
| { |
| ALOGD ("%s: modes=0x%X", __FUNCTION__, modes); |
| // Map in the right modes |
| tNFA_TECHNOLOGY_MASK mask = 0; |
| if (modes & 0x01) mask |= NFA_TECHNOLOGY_MASK_A; |
| if (modes & 0x02) mask |= NFA_TECHNOLOGY_MASK_F; |
| if (modes & 0x04) mask |= NFA_TECHNOLOGY_MASK_F; |
| if (modes & 0x08) mask |= NFA_TECHNOLOGY_MASK_A_ACTIVE | NFA_TECHNOLOGY_MASK_F_ACTIVE; |
| |
| PeerToPeer::getInstance().setP2pListenMask(mask); |
| //this function is not called by the NFC service nor exposed by public API. |
| } |
| |
| /***************************************************************************** |
| ** |
| ** JNI functions for android-4.0.1_r1 |
| ** |
| *****************************************************************************/ |
| static JNINativeMethod gMethods[] = |
| { |
| {"doDownload", "()Z", |
| (void *)nfcManager_doDownload}, |
| |
| {"initializeNativeStructure", "()Z", |
| (void*) nfcManager_initNativeStruc}, |
| |
| {"doInitialize", "()Z", |
| (void*) nfcManager_doInitialize}, |
| |
| {"doDeinitialize", "()Z", |
| (void*) nfcManager_doDeinitialize}, |
| |
| {"enableDiscovery", "()V", |
| (void*) nfcManager_enableDiscovery}, |
| |
| {"doGetSecureElementList", "()[I", |
| (void *)nfcManager_doGetSecureElementList}, |
| |
| {"doSelectSecureElement", "()V", |
| (void *)nfcManager_doSelectSecureElement}, |
| |
| {"doDeselectSecureElement", "()V", |
| (void *)nfcManager_doDeselectSecureElement}, |
| |
| {"doCheckLlcp", "()Z", |
| (void *)nfcManager_doCheckLlcp}, |
| |
| {"doActivateLlcp", "()Z", |
| (void *)nfcManager_doActivateLlcp}, |
| |
| {"doCreateLlcpConnectionlessSocket", "(ILjava/lang/String;)Lcom/android/nfc/dhimpl/NativeLlcpConnectionlessSocket;", |
| (void *)nfcManager_doCreateLlcpConnectionlessSocket}, |
| |
| {"doCreateLlcpServiceSocket", "(ILjava/lang/String;III)Lcom/android/nfc/dhimpl/NativeLlcpServiceSocket;", |
| (void*) nfcManager_doCreateLlcpServiceSocket}, |
| |
| {"doCreateLlcpSocket", "(IIII)Lcom/android/nfc/dhimpl/NativeLlcpSocket;", |
| (void*) nfcManager_doCreateLlcpSocket}, |
| |
| {"doGetLastError", "()I", |
| (void*) nfcManager_doGetLastError}, |
| |
| {"disableDiscovery", "()V", |
| (void*) nfcManager_disableDiscovery}, |
| |
| {"doSetTimeout", "(II)Z", |
| (void *)nfcManager_doSetTimeout}, |
| |
| {"doGetTimeout", "(I)I", |
| (void *)nfcManager_doGetTimeout}, |
| |
| {"doResetTimeouts", "()V", |
| (void *)nfcManager_doResetTimeouts}, |
| |
| {"doAbort", "()V", |
| (void *)nfcManager_doAbort}, |
| |
| {"doSetP2pInitiatorModes", "(I)V", |
| (void *)nfcManager_doSetP2pInitiatorModes}, |
| |
| {"doSetP2pTargetModes", "(I)V", |
| (void *)nfcManager_doSetP2pTargetModes}, |
| |
| {"doDump", "()Ljava/lang/String;", |
| (void *)nfcManager_doDump}, |
| }; |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: register_com_android_nfc_NativeNfcManager |
| ** |
| ** Description: Regisgter JNI functions with Java Virtual Machine. |
| ** e: Environment of JVM. |
| ** |
| ** Returns: Status of registration. |
| ** |
| *******************************************************************************/ |
| int register_com_android_nfc_NativeNfcManager (JNIEnv *e) |
| { |
| ALOGD ("%s: enter", __FUNCTION__); |
| PowerSwitch::getInstance ().initialize (PowerSwitch::UNKNOWN_LEVEL); |
| ALOGD ("%s: exit", __FUNCTION__); |
| return jniRegisterNativeMethods (e, gNativeNfcManagerClassName, gMethods, NELEM (gMethods)); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: startRfDiscovery |
| ** |
| ** Description: Ask stack to start polling and listening for devices. |
| ** isStart: Whether to start. |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| void startRfDiscovery(bool isStart) |
| { |
| tNFA_STATUS status = NFA_STATUS_FAILED; |
| |
| ALOGD ("%s: is start=%d", __FUNCTION__, isStart); |
| SyncEventGuard guard (sNfaEnableDisablePollingEvent); |
| status = isStart ? NFA_StartRfDiscovery () : NFA_StopRfDiscovery (); |
| if (status == NFA_STATUS_OK) |
| { |
| sNfaEnableDisablePollingEvent.wait (); //wait for NFA_RF_DISCOVERY_xxxx_EVT |
| sRfEnabled = isStart; |
| } |
| else |
| { |
| ALOGE ("%s: Failed to start/stop RF discovery; error=0x%X", __FUNCTION__, status); |
| } |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: doStartupConfig |
| ** |
| ** Description: Configure the NFC controller. |
| ** |
| ** Returns: None |
| ** |
| *******************************************************************************/ |
| void doStartupConfig() |
| { |
| unsigned long num = 0; |
| struct nfc_jni_native_data *nat = getNative(0, 0); |
| tNFA_STATUS stat = NFA_STATUS_FAILED; |
| |
| // Enable the "RC workaround" to allow our stack/firmware to work with a retail |
| // Nexus S that causes IOP issues. Only enable if value exists and set to 1. |
| if (GetNumValue(NAME_USE_NXP_P2P_RC_WORKAROUND, &num, sizeof(num)) && (num == 1)) |
| { |
| #if (NCI_VERSION > NCI_VERSION_20791B0) |
| UINT8 nfa_dm_rc_workaround[] = { 0x03, 0x0f, 0xab }; |
| #else |
| UINT8 nfa_dm_rc_workaround[] = { 0x01, 0x0f, 0xab, 0x01 }; |
| #endif |
| |
| ALOGD ("%s: Configure RC work-around", __FUNCTION__); |
| SyncEventGuard guard (sNfaSetConfigEvent); |
| stat = NFA_SetConfig(NCI_PARAM_ID_FW_WORKAROUND, sizeof(nfa_dm_rc_workaround), &nfa_dm_rc_workaround[0]); |
| if (stat == NFA_STATUS_OK) |
| sNfaSetConfigEvent.wait (); |
| } |
| |
| // If polling for Active mode, set the ordering so that we choose Active over Passive mode first. |
| if (nat && (nat->tech_mask & (NFA_TECHNOLOGY_MASK_A_ACTIVE | NFA_TECHNOLOGY_MASK_F_ACTIVE))) |
| { |
| UINT8 act_mode_order_param[] = { 0x01 }; |
| SyncEventGuard guard (sNfaSetConfigEvent); |
| stat = NFA_SetConfig(NCI_PARAM_ID_ACT_ORDER, sizeof(act_mode_order_param), &act_mode_order_param[0]); |
| if (stat == NFA_STATUS_OK) |
| sNfaSetConfigEvent.wait (); |
| } |
| |
| // Set configuration to allow UICC to Power off if there is no traffic. |
| if (GetNumValue(NAME_UICC_IDLE_TIMEOUT, &num, sizeof(num)) && (num != 0)) |
| { |
| // 61 => The least significant bit of this byte enables the power off when Idle mode. |
| // 00 87 93 03 == > These 4 bytes form a 4 byte value which decides the idle timeout(in us) |
| // value to trigger the uicc deactivation. |
| // e.g. in current example its value is 0x3938700 i.e. 60000000 is 60 seconds. |
| UINT8 swpcfg_param[] = { 0x61, 0x00, 0x82, 0x04, 0x20, 0xA1, 0x07, 0x00, |
| 0x90, 0xD0, 0x03, 0x00, 0x00, 0x87, 0x93, 0x03 }; |
| |
| ALOGD ("%s: Configure UICC idle-timeout to %lu ms", __FUNCTION__, num); |
| |
| // Set the timeout from the .conf file value. |
| num *= 1000; |
| UINT8 * p = &swpcfg_param[12]; |
| UINT32_TO_STREAM(p, num) |
| |
| SyncEventGuard guard (sNfaSetConfigEvent); |
| stat = NFA_SetConfig(NCI_PARAM_ID_SWPCFG, sizeof(swpcfg_param), &swpcfg_param[0]); |
| if (stat == NFA_STATUS_OK) |
| sNfaSetConfigEvent.wait (); |
| } |
| |
| // Set antenna tuning configuration if configured. |
| #define PREINIT_DSP_CFG_SIZE 30 |
| UINT8 preinit_dsp_param[PREINIT_DSP_CFG_SIZE]; |
| |
| if (GetStrValue(NAME_PREINIT_DSP_CFG, (char*)&preinit_dsp_param[0], sizeof(preinit_dsp_param))) |
| { |
| SyncEventGuard guard (sNfaSetConfigEvent); |
| stat = NFA_SetConfig(NCI_PARAM_ID_PREINIT_DSP_CFG, sizeof(preinit_dsp_param), &preinit_dsp_param[0]); |
| if (stat == NFA_STATUS_OK) |
| sNfaSetConfigEvent.wait (); |
| } |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: nfcManager_isNfcActive |
| ** |
| ** Description: Used externaly to determine if NFC is active or not. |
| ** |
| ** Returns: 'true' if the NFC stack is running, else 'false'. |
| ** |
| *******************************************************************************/ |
| bool nfcManager_isNfcActive() |
| { |
| return sIsNfaEnabled; |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function: startStopPolling |
| ** |
| ** Description: Start or stop polling. |
| ** isStartPolling: true to start polling; false to stop polling. |
| ** |
| ** Returns: None. |
| ** |
| *******************************************************************************/ |
| void startStopPolling (bool isStartPolling) |
| { |
| ALOGD ("%s: enter; isStart=%u", __FUNCTION__, isStartPolling); |
| tNFA_STATUS stat = NFA_STATUS_FAILED; |
| |
| startRfDiscovery (false); |
| if (isStartPolling) |
| { |
| tNFA_TECHNOLOGY_MASK tech_mask = DEFAULT_TECH_MASK; |
| unsigned long num = 0; |
| if (GetNumValue(NAME_POLLING_TECH_MASK, &num, sizeof(num))) |
| tech_mask = num; |
| |
| SyncEventGuard guard (sNfaEnableDisablePollingEvent); |
| ALOGD ("%s: enable polling", __FUNCTION__); |
| stat = NFA_EnablePolling (tech_mask); |
| if (stat == NFA_STATUS_OK) |
| { |
| ALOGD ("%s: wait for enable event", __FUNCTION__); |
| sNfaEnableDisablePollingEvent.wait (); //wait for NFA_POLL_ENABLED_EVT |
| } |
| else |
| ALOGE ("%s: fail enable polling; error=0x%X", __FUNCTION__, stat); |
| } |
| else |
| { |
| SyncEventGuard guard (sNfaEnableDisablePollingEvent); |
| ALOGD ("%s: disable polling", __FUNCTION__); |
| stat = NFA_DisablePolling (); |
| if (stat == NFA_STATUS_OK) |
| { |
| sNfaEnableDisablePollingEvent.wait (); //wait for NFA_POLL_DISABLED_EVT |
| } |
| else |
| ALOGE ("%s: fail disable polling; error=0x%X", __FUNCTION__, stat); |
| } |
| startRfDiscovery (true); |
| ALOGD ("%s: exit", __FUNCTION__); |
| } |
| |
| |
| } /* namespace android */ |
