nci/jni/extns/pn54x/src/mifare/phFriNfc_SmtCrdFmt.c

/*
 * Copyright (C) 2015 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/*
 * Smart Card Completion Routing component
 */

#include <phNfcTypes.h>
#include<phFriNfc.h>
#include <phFriNfc_SmtCrdFmt.h>
#include <phNfcCompId.h>
#include <phFriNfc_MifStdFormat.h>


/*******************************************************************************
**
** Function         phFriNfc_SmtCrdFmt_HCrHandler
**
** Description      This function is called to complete Completion Routine when gets error.
**
** Returns          none.
**
*******************************************************************************/
void phFriNfc_SmtCrdFmt_HCrHandler(phFriNfc_sNdefSmtCrdFmt_t  *NdefSmtCrdFmt, NFCSTATUS Status)
{
    /* set the state back to the Reset_Init state*/
    NdefSmtCrdFmt->State =  PH_FRINFC_SMTCRDFMT_STATE_RESET_INIT;

    /* set the completion routine*/
    NdefSmtCrdFmt->CompletionRoutine[PH_FRINFC_SMTCRDFMT_CR_FORMAT].
        CompletionRoutine(NdefSmtCrdFmt->CompletionRoutine->Context, Status);

    return;
}

/*******************************************************************************
**
** Function         phFriNfc_NdefSmtCrd_Reset
**
** Description      Resets the component instance to the initial state and initializes the
**                  internal variables.
**                  This function has to be called at the beginning, after creating an instance of
**                  phFriNfc_sNdefSmtCrdFmt_t.  Use this function to reset the instance and/or to switch
**                  to a different underlying card types.
**
** Returns          NFCSTATUS_SUCCESS if operation successful.
**                  NFCSTATUS_INVALID_PARAMETER if at least one parameter of the function is invalid.
**
*******************************************************************************/
NFCSTATUS phFriNfc_NdefSmtCrd_Reset(phFriNfc_sNdefSmtCrdFmt_t       *NdefSmtCrdFmt,
                                    void                            *LowerDevice,
                                    phHal_sRemoteDevInformation_t   *psRemoteDevInfo,
                                    uint8_t                         *SendRecvBuffer,
                                    uint16_t                        *SendRecvBuffLen)
{
    NFCSTATUS   result = NFCSTATUS_SUCCESS;
    uint8_t     index;
    if (    (SendRecvBuffLen == NULL) || (NdefSmtCrdFmt == NULL) || (psRemoteDevInfo == NULL) ||
            (SendRecvBuffer == NULL) ||  (LowerDevice == NULL) ||
            (*SendRecvBuffLen == 0) ||
            (*SendRecvBuffLen < PH_FRINFC_SMTCRDFMT_MAX_SEND_RECV_BUF_SIZE) )
    {
        result = PHNFCSTVAL(CID_FRI_NFC_NDEF_SMTCRDFMT, NFCSTATUS_INVALID_PARAMETER);
    }
    else
    {
        /* Initialize the state to Init */
        NdefSmtCrdFmt->State = PH_FRINFC_SMTCRDFMT_STATE_RESET_INIT;

        for(index = 0;index<PH_FRINFC_SMTCRDFMT_CR;index++)
        {
            /* Initialize the NdefMap Completion Routine to Null */
            NdefSmtCrdFmt->CompletionRoutine[index].CompletionRoutine = NULL;
            /* Initialize the NdefMap Completion Routine context to Null  */
            NdefSmtCrdFmt->CompletionRoutine[index].Context = NULL;
        }

        /* Lower Device(Always Overlapped HAL Struct initialized in application
         * is registered in NdefMap Lower Device)
         */
        NdefSmtCrdFmt->pTransceiveInfo = LowerDevice;

        /* Remote Device info received from Manual Device Discovery is registered here */
        NdefSmtCrdFmt->psRemoteDevInfo = psRemoteDevInfo;

        /* Trx Buffer registered */
        NdefSmtCrdFmt->SendRecvBuf = SendRecvBuffer;

        /* Trx Buffer Size */
        NdefSmtCrdFmt->SendRecvLength = SendRecvBuffLen;

        /* Register Transfer Buffer Length */
        NdefSmtCrdFmt->SendLength = 0;

        /* Initialize the Format status flag*/
        NdefSmtCrdFmt->FmtProcStatus = 0;

        /* Reset the Card Type */
        NdefSmtCrdFmt->CardType = 0;

        /* Reset MapCompletion Info*/
        NdefSmtCrdFmt->SmtCrdFmtCompletionInfo.CompletionRoutine = NULL;
        NdefSmtCrdFmt->SmtCrdFmtCompletionInfo.Context = NULL;

        /* Reset Mifare Standard Container elements*/
        phFriNfc_MfStd_Reset(NdefSmtCrdFmt);
    }

    return (result);
}

/*******************************************************************************
**
** Function         phFriNfc_NdefSmtCrd_SetCR
**
** Description      This function allows the caller to set a Completion Routine (notifier).
**
** Returns          NFCSTATUS_SUCCESS if operation successful.
**                  NFCSTATUS_INVALID_PARAMETER if at least one parameter of the function is invalid.
**
*******************************************************************************/
NFCSTATUS phFriNfc_NdefSmtCrd_SetCR(phFriNfc_sNdefSmtCrdFmt_t     *NdefSmtCrdFmt,
                                    uint8_t                       FunctionID,
                                    pphFriNfc_Cr_t                CompletionRoutine,
                                    void                          *CompletionRoutineContext)
{
    NFCSTATUS   status = NFCSTATUS_SUCCESS;
    if ((NdefSmtCrdFmt == NULL) || (FunctionID >= PH_FRINFC_SMTCRDFMT_CR) ||
        (CompletionRoutine == NULL) || (CompletionRoutineContext == NULL))
    {
        status = PHNFCSTVAL(CID_FRI_NFC_NDEF_SMTCRDFMT, NFCSTATUS_INVALID_PARAMETER);
    }
    else
    {
        /* Register the application callback with the NdefMap Completion Routine */
        NdefSmtCrdFmt->CompletionRoutine[FunctionID].CompletionRoutine = CompletionRoutine;

        /* Register the application context with the NdefMap Completion Routine context */
        NdefSmtCrdFmt->CompletionRoutine[FunctionID].Context = CompletionRoutineContext;
    }
    return status;
}

/*******************************************************************************
**
** Function         phFriNfc_NdefSmtCrd_Process
**
** Description      This function is called by the lower layer (OVR HAL)
**                  when an I/O operation has finished. The internal state machine decides
**                  whether to call into the lower device again or to complete the process
**                  by calling into the upper layer's completion routine, stored within this
**                  component's context (phFriNfc_sNdefSmtCrdFmt_t).
**
** Returns          none.
**
*******************************************************************************/
void phFriNfc_NdefSmtCrd_Process(void *Context, NFCSTATUS Status)
{
    if ( Context != NULL )
    {
        phFriNfc_sNdefSmtCrdFmt_t  *NdefSmtCrdFmt = (phFriNfc_sNdefSmtCrdFmt_t *)Context;

        switch ( NdefSmtCrdFmt->psRemoteDevInfo->RemDevType )
        {
            case phNfc_eMifare_PICC :
            case phNfc_eISO14443_3A_PICC:
                if((NdefSmtCrdFmt->CardType == PH_FRINFC_SMTCRDFMT_MFSTD_1K_CRD) ||
                    (NdefSmtCrdFmt->CardType == PH_FRINFC_SMTCRDFMT_MFSTD_4K_CRD) ||
                    (NdefSmtCrdFmt->CardType == PH_FRINFC_SMTCRDFMT_MFSTD_2K_CRD))
                {
                    /* Remote device is Mifare Standard card */
                    phFriNfc_MfStd_Process(NdefSmtCrdFmt,Status);

                }
                else
                {
                    Status = PHNFCSTVAL(CID_FRI_NFC_NDEF_SMTCRDFMT,
                                         NFCSTATUS_INVALID_REMOTE_DEVICE);
                }
            break;
            default :
                /* Remote device opmode not recognized.
                 * Probably not NDEF compliant
                 */
                Status = PHNFCSTVAL(CID_FRI_NFC_NDEF_SMTCRDFMT,
                                    NFCSTATUS_INVALID_REMOTE_DEVICE);
                /* set the state back to the Reset_Init state*/
                NdefSmtCrdFmt->State =  PH_FRINFC_SMTCRDFMT_STATE_RESET_INIT;

                /* set the completion routine*/
                NdefSmtCrdFmt->CompletionRoutine[PH_FRINFC_SMTCRDFMT_CR_INVALID_OPE].
                CompletionRoutine(NdefSmtCrdFmt->CompletionRoutine->Context, Status);
            break;
        }
    }
    else
    {
        Status = PHNFCSTVAL(CID_FRI_NFC_NDEF_SMTCRDFMT,\
                            NFCSTATUS_INVALID_PARAMETER);
        /* The control should not come here. As Context itself is NULL ,
         * Can't call the CR
         */
    }

    return;
}