| #!/bin/sh |
| |
| # |
| # Copyright (c) 2009, 2012, Oracle and/or its affiliates. All rights reserved. |
| # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
| # |
| # This code is free software; you can redistribute it and/or modify it |
| # under the terms of the GNU General Public License version 2 only, as |
| # published by the Free Software Foundation. |
| # |
| # This code is distributed in the hope that it will be useful, but WITHOUT |
| # ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| # FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| # version 2 for more details (a copy is included in the LICENSE file that |
| # accompanied this code). |
| # |
| # You should have received a copy of the GNU General Public License version |
| # 2 along with this work; if not, write to the Free Software Foundation, |
| # Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. |
| # |
| # Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA |
| # or visit www.oracle.com if you need additional information or have any |
| # questions. |
| # |
| |
| # This file should be used to set the Visual Studio environment |
| # variables normally set by the vcvars32.bat or vcvars64.bat file or |
| # SetEnv.cmd for older SDKs. |
| |
| ######################################################################## |
| # Error functions |
| msg() # message |
| { |
| echo "$1" 1>&2 |
| } |
| error() # message |
| { |
| msg "ERROR: $1" |
| exit 1 |
| } |
| warning() # message |
| { |
| msg "WARNING: $1" |
| } |
| envpath() # path |
| { |
| if [ "${fixpath}" != "" -a -d "$1" ] ; then |
| ${fixpath} "$1" |
| else |
| echo "$1" |
| fi |
| } |
| ######################################################################## |
| |
| |
| # Defaults settings |
| debug="false" |
| verbose="false" |
| |
| set -e |
| |
| CYGWIN="nodosfilewarning ntsec" |
| export CYGWIN |
| |
| # pathsepIn is always ; because the input strings are coming from |
| # vcvarsxx.bat. This is true under all of MKS, Cygwin, MINGW/msys |
| pathsepIn=';' |
| |
| OS="`uname -s`" |
| case "${OS}" in |
| CYGWIN*) |
| pathflag='-c' |
| devnull=/dev/null |
| pathsepOut=':' |
| ;; |
| |
| MINGW*) |
| pathflag='-m' |
| devnull=/dev/null |
| pathsepOut=':' |
| ;; |
| |
| *) |
| # MKS? |
| # Continue using dosname -s |
| pathflag='-s' |
| fixpath="dosname ${pathflag}" |
| fixpath_windows="${fixpath}" |
| fixpath_path="echo" |
| devnull=NUL |
| pathsepOut=';' |
| ;; |
| esac |
| |
| case "${OS}" in |
| CYGWIN*|MINGW*) |
| t=`dirname ${0}` |
| wd=`cd ${t} 2> ${devnull} && pwd` |
| fixpath_script="${wd}/fixpath.pl" |
| if [ ! -f "${fixpath_script}" ] ; then |
| error "Does not exist: ${fixpath_script}" |
| fi |
| fixpath="perl ${fixpath_script} ${pathflag}" |
| fixpath_windows="perl ${fixpath_script} -d" |
| fixpath_path="${fixpath_windows}" |
| ;; |
| esac |
| |
| shellStyle="sh" |
| ## As far as I can tell from hg history, this has not worked |
| ## for a long time because PPID is unset. When run under Cygwin |
| ## the script quits due to the 1 return from grep. |
| ##parentCsh="` ps -p ${PPID} 2> ${devnull} | grep csh `" |
| ##if [ "${parentCsh}" != "" ] ; then |
| ## shellStyle="csh" |
| ##fi |
| |
| # Check environment first |
| if [ "${PROGRAMFILES}" != "" ] ; then |
| progfiles=`envpath "${PROGRAMFILES}"` |
| elif [ "${ProgramFiles}" != "" ] ; then |
| progfiles=`envpath "${ProgramFiles}"` |
| elif [ "${SYSTEMDRIVE}" != "" ] ; then |
| progfiles=`envpath "${SYSTEMDRIVE}/Program Files"` |
| elif [ "${SystemDrive}" != "" ] ; then |
| progfiles=`envpath "${SystemDrive}/Program Files"` |
| else |
| error "No PROGRAMFILES or SYSTEMDRIVE defined in environment" |
| fi |
| |
| # Arch data model |
| if [ "${PROCESSOR_IDENTIFIER}" != "" ] ; then |
| arch=`echo "${PROCESSOR_IDENTIFIER}" | cut -d' ' -f1` |
| else |
| if [ "${MACHTYPE}" != "" ] ; then |
| if [ "`echo ${MACHTYPE} | grep 64`" != "" ] ; then |
| # Assume this is X64, not IA64 |
| arch="x64" |
| else |
| arch="x86" |
| fi |
| else |
| arch="`uname -m`" |
| fi |
| PROCESSOR_IDENTIFIER="${arch}" |
| export PROCESSOR_IDENTIFIER |
| fi |
| if [ "${arch}" = "X86" -o \ |
| "${arch}" = "386" -o "${arch}" = "i386" -o \ |
| "${arch}" = "486" -o "${arch}" = "i486" -o \ |
| "${arch}" = "586" -o "${arch}" = "i586" -o \ |
| "${arch}" = "686" -o "${arch}" = "i686" -o \ |
| "${arch}" = "86" ] ; then |
| arch="x86" |
| fi |
| if [ "${arch}" = "X64" -o \ |
| "${arch}" = "8664" -o "${arch}" = "i8664" -o \ |
| "${arch}" = "amd64" -o "${arch}" = "AMD64" -o \ |
| "${arch}" = "EM64T" -o "${arch}" = "emt64t" -o \ |
| "${arch}" = "intel64" -o "${arch}" = "Intel64" -o \ |
| "${arch}" = "64" ] ; then |
| arch="x64" |
| binarch64="\\amd64" |
| fi |
| if [ "${arch}" = "IA64" ] ; then |
| arch="ia64" |
| binarch64="\\ia64" |
| fi |
| if [ "${arch}" != "x86" -a "${arch}" != "x64" -a "${arch}" != "ia64" ] ; then |
| error "No PROCESSOR_IDENTIFIER or MACHTYPE environment variables and uname -m is not helping" |
| fi |
| if [ "${arch}" = "x86" ] ; then |
| arch_data_model=32 |
| progfiles32="${progfiles}" |
| progfiles64="${progfiles}" |
| else |
| arch_data_model=64 |
| progfiles32="${progfiles}" |
| if [ "${PROGRAMW6432}" != "" ] ; then |
| progfiles64=`envpath "${PROGRAMW6432}"` |
| else |
| progfiles64=`envpath "C:/Program Files"` |
| fi |
| fi |
| |
| # VS2012 (VC11) |
| if [ "${VS110COMNTOOLS}" = "" ] ; then |
| VS110COMNTOOLS="${progfiles32}/Microsoft Visual Studio 11.0/Common7/Tools/" |
| export VS110COMNTOOLS |
| fi |
| vc11Bin32Dir=`envpath "${VS110COMNTOOLS}"`/../../VC/Bin |
| vc11Bin64Dir="${vc11Bin32Dir}" |
| vc11vars32Bat="vcvars32.bat" |
| vc11vars64Bat="vcvars64.bat" |
| |
| # VS2010 (VC10) |
| if [ "${VS100COMNTOOLS}" = "" ] ; then |
| VS100COMNTOOLS="${progfiles32}/Microsoft Visual Studio 10.0/Common7/Tools/" |
| export VS100COMNTOOLS |
| fi |
| vc10Bin32Dir=`envpath "${VS100COMNTOOLS}"`/../../VC/Bin |
| vc10Bin64Dir="${vc10Bin32Dir}${binarch64}" |
| vc10vars32Bat="vcvars32.bat" |
| vc10vars64Bat="vcvars64.bat" |
| |
| # VS2008 (VC9) |
| if [ "${VS90COMNTOOLS}" = "" ] ; then |
| VS90COMNTOOLS="${progfiles32}/Microsoft Visual Studio 9.0/Common7/Tools/" |
| export VS90COMNTOOLS |
| fi |
| vc9Bin32Dir=`envpath "${VS90COMNTOOLS}"`/../../VC/Bin |
| vc9Bin64Dir="${vc9Bin32Dir}" |
| vc9vars32Bat="vcvars32.bat" |
| vc9vars64Bat="vcvars64.bat" |
| |
| # VS2005 (VC8) |
| if [ "${VS80COMNTOOLS}" = "" ] ; then |
| VS80COMNTOOLS="${progfiles32}/Microsoft Visual Studio 8.0/Common7/Tools/" |
| export VS80COMNTOOLS |
| fi |
| vc8Bin32Dir=`envpath "${VS80COMNTOOLS}"`/../../VC/Bin |
| vc8Bin64Dir="${progfiles64}/Microsoft Platform SDK" |
| vc8vars32Bat="vcvars32.bat" |
| vc8vars64Bat="SetEnv.cmd /X64" |
| |
| # VS2003 (VC7) |
| if [ "${VS71COMNTOOLS}" = "" ] ; then |
| VS71COMNTOOLS="${progfiles32}/Microsoft Visual Studio .NET 2003/Common7/Tools/" |
| export VS71COMNTOOLS |
| fi |
| vc7Bin32Dir=`envpath "${VS71COMNTOOLS}"`/../../VC7/Bin |
| vc7Bin64Dir="${progfiles64}/Microsoft Platform SDK" |
| vc7vars32Bat="vcvars32.bat" |
| vc7vars64Bat="SetEnv.cmd /X64" |
| |
| # Force user to select |
| vcSelection="" |
| |
| # Parse options |
| usage="Usage: $0 [-help] [-debug] [-v] [-c] [-s] [-p] [-v11] [-v10] [-v9] [-v8] [-v7] [-32] [-64]" |
| while [ $# -gt 0 ] ; do |
| if [ "$1" = "-help" ] ; then |
| msg "${usage}" |
| msg " -help Print out this help message" |
| msg " -debug Print out extra env variables to help debug this script" |
| msg " -v Verbose output warns about missing directories" |
| msg " -c Print out csh style output" |
| msg " -s Print out sh style output" |
| msg " -p Print out properties style output" |
| msg " -v11 Use Visual Studio 11 VS2012" |
| msg " -v10 Use Visual Studio 10 VS2010" |
| msg " -v9 Use Visual Studio 9 VS2008" |
| msg " -v8 Use Visual Studio 8 VS2005" |
| msg " -v7 Use Visual Studio 7 VS2003" |
| msg " -32 Force 32bit" |
| msg " -64 Force 64bit" |
| exit 0 |
| elif [ "$1" = "-debug" ] ; then |
| debug="true" |
| shift |
| elif [ "$1" = "-v" ] ; then |
| verbose="true" |
| shift |
| elif [ "$1" = "-c" ] ; then |
| shellStyle="csh" |
| shift |
| elif [ "$1" = "-s" ] ; then |
| shellStyle="sh" |
| shift |
| elif [ "$1" = "-p" ] ; then |
| shellStyle="props" |
| shift |
| elif [ "$1" = "-v11" ] ; then |
| vcBin32Dir="${vc11Bin32Dir}" |
| vcBin64Dir="${vc11Bin64Dir}" |
| vcvars32Bat="${vc11vars32Bat}" |
| vcvars64Bat="${vc11vars64Bat}" |
| vcSelection="11" |
| shift |
| elif [ "$1" = "-v10" ] ; then |
| vcBin32Dir="${vc10Bin32Dir}" |
| vcBin64Dir="${vc10Bin64Dir}" |
| vcvars32Bat="${vc10vars32Bat}" |
| vcvars64Bat="${vc10vars64Bat}" |
| vcSelection="10" |
| shift |
| elif [ "$1" = "-v9" ] ; then |
| vcBin32Dir="${vc9Bin32Dir}" |
| vcBin64Dir="${vc9Bin64Dir}" |
| vcvars32Bat="${vc9vars32Bat}" |
| vcvars64Bat="${vc9vars64Bat}" |
| vcSelection="9" |
| shift |
| elif [ "$1" = "-v8" ] ; then |
| vcBin32Dir="${vc8Bin32Dir}" |
| vcBin64Dir="${vc8Bin64Dir}" |
| vcvars32Bat="${vc8vars32Bat}" |
| vcvars64Bat="${vc8vars64Bat}" |
| vcSelection="8" |
| shift |
| elif [ "$1" = "-v7" ] ; then |
| vcBin32Dir="${vc7Bin32Dir}" |
| vcBin64Dir="${vc7Bin64Dir}" |
| vcvars32Bat="${vc7vars32Bat}" |
| vcvars64Bat="${vc7vars64Bat}" |
| vcSelection="7" |
| shift |
| elif [ "$1" = "-32" ] ; then |
| arch_data_model=32 |
| shift |
| elif [ "$1" = "-64" ] ; then |
| arch_data_model=64 |
| shift |
| else |
| msg "${usage}" |
| error "Unknown option: $1" |
| fi |
| done |
| |
| # Need to pick |
| if [ "${vcSelection}" = "" ] ; then |
| msg "${usage}" |
| error "You must pick the version" |
| fi |
| |
| # Which vcvars bat file to run |
| if [ "${arch_data_model}" = "32" ] ; then |
| vcBinDir="${vcBin32Dir}" |
| vcvarsBat="${vcvars32Bat}" |
| fi |
| if [ "${arch_data_model}" = "64" ] ; then |
| vcBinDir="${vcBin64Dir}" |
| vcvarsBat="${vcvars64Bat}" |
| fi |
| |
| # Do not allow any error returns |
| set -e |
| |
| # Different systems have different awk's |
| if [ -f /usr/bin/nawk ] ; then |
| awk="nawk" |
| elif [ -f /usr/bin/gawk ] ; then |
| awk="gawk" |
| else |
| awk="awk" |
| fi |
| |
| if [ "${verbose}" = "true" ] ; then |
| echo "# Welcome to verbose mode" |
| set -x |
| fi |
| |
| if [ "${debug}" = "true" ] ; then |
| echo "# Welcome to debug mode" |
| set -x |
| fi |
| |
| # Temp file area |
| tmp="/tmp/vsvars.$$" |
| rm -f -r ${tmp} |
| mkdir -p ${tmp} |
| |
| # Check paths |
| checkPaths() # var path sep |
| { |
| set -e |
| sep="$3" |
| checklist="${tmp}/checklist" |
| printf "%s\n" "$2" | \ |
| sed -e 's@\\@/@g' | \ |
| sed -e 's@//@/@g' | \ |
| ${awk} -F"${sep}" '{for(i=1;i<=NF;i++){printf "%s\n",$i;}}' \ |
| > ${checklist} |
| cat ${checklist} | while read orig; do |
| if [ "${orig}" != "" ] ; then |
| if [ ! -d "${orig}" ] ; then |
| warning "Directory in $1 does not exist: ${orig}" |
| fi |
| fi |
| done |
| } |
| |
| # Remove all duplicate entries |
| removeDeadDups() # string sepIn sepOut |
| { |
| set -e |
| sepIn="$2" |
| sepOut="$3" |
| pathlist="${tmp}/pathlist" |
| printf "%s\n" "$1" | \ |
| sed -e 's@\\@/@g' | \ |
| sed -e 's@//@/@g' | \ |
| ${awk} -F"${sepIn}" '{for(i=1;i<=NF;i++){printf "%s\n",$i;}}' \ |
| > ${pathlist} |
| upaths="${tmp}/upaths" |
| cat ${pathlist} | while read orig; do |
| p="${orig}" |
| if [ "${fixpath}" != "" ] ; then |
| if [ "${p}" != "" ] ; then |
| if [ -d "${p}" ] ; then |
| short=`${fixpath} "${p}"` |
| if [ "${short}" != "" -a -d "${short}" ] ; then |
| p="${short}" |
| fi |
| echo "${p}" >> ${upaths} |
| fi |
| fi |
| fi |
| done |
| newpaths="" |
| for i in `cat ${upaths}` ; do |
| # For some reason, \r characters can get into this |
| i=`echo "${i}" | tr -d '\r' | sed -e 's@/$@@'` |
| if [ "${newpaths}" = "" ] ; then |
| newpaths="${i}" |
| else |
| newpaths="${newpaths}${sepOut}${i}" |
| fi |
| done |
| printf "%s\n" "${newpaths}" | \ |
| ${awk} -F"${sepOut}" \ |
| '{a[$1];printf "%s",$1;for(i=2;i<=NF;i++){if(!($i in a)){a[$i];printf "%s%s",FS,$i;}};printf "\n";}' |
| } |
| |
| # Create bat file to process Visual Studio vcvars*.bat files |
| createBat() # batfile bindir command |
| { |
| bat="$1" |
| bindir="$2" |
| command="$3" |
| stdout="${bat}.stdout" |
| rm -f ${bat} ${stdout} |
| echo "Output from: ${command}" > ${stdout} |
| bdir=`envpath "${bindir}"` |
| cat > ${bat} << EOF |
| REM Pick the right vcvars bat file |
| REM Empty these out so we only get the additions we want |
| set INCLUDE= |
| set LIB= |
| set LIBPATH= |
| set MSVCDIR= |
| set MSSdk= |
| set Mstools= |
| set DevEnvDir= |
| set VCINSTALLDIR= |
| set VSINSTALLDIR= |
| set WindowsSdkDir= |
| REM Run the vcvars bat file, send all output to stderr |
| call `${fixpath_windows} ${bdir}`\\${command} > `${fixpath_windows} "${stdout}"` |
| REM Echo out env var settings |
| echo VS_VS71COMNTOOLS="%VS71COMNTOOLS%" |
| echo export VS_VS71COMNTOOLS |
| echo VS_VS80COMNTOOLS="%VS80COMNTOOLS%" |
| echo export VS_VS80COMNTOOLS |
| echo VS_VS90COMNTOOLS="%VS90COMNTOOLS%" |
| echo export VS_VS90COMNTOOLS |
| echo VS_VS100COMNTOOLS="%VS100COMNTOOLS%" |
| echo export VS_VS100COMNTOOLS |
| echo VS_VS110COMNTOOLS="%VS110COMNTOOLS%" |
| echo export VS_VS110COMNTOOLS |
| echo VS_VCINSTALLDIR="%VCINSTALLDIR%" |
| echo export VS_VCINSTALLDIR |
| echo VS_VSINSTALLDIR="%VSINSTALLDIR%" |
| echo export VS_VSINSTALLDIR |
| echo VS_DEVENVDIR="%DevEnvDir%" |
| echo export VS_DEVENVDIR |
| echo VS_MSVCDIR="%MSVCDIR%" |
| echo export VS_MSVCDIR |
| echo VS_MSSDK="%MSSdk%" |
| echo export VS_MSSDK |
| echo VS_MSTOOLS="%Mstools%" |
| echo export VS_MSTOOLS |
| echo VS_WINDOWSSDKDIR="%WindowsSdkDir%" |
| echo export VS_WINDOWSSDKDIR |
| echo VS_INCLUDE="%INCLUDE%" |
| echo export VS_INCLUDE |
| echo VS_LIB="%LIB%" |
| echo export VS_LIB |
| echo VS_LIBPATH="%LIBPATH%" |
| echo export VS_LIBPATH |
| echo VS_WPATH="%PATH%" |
| echo export VS_WPATH |
| EOF |
| chmod a+x ${bat} |
| } |
| |
| # Create env file |
| createEnv() # batfile envfile |
| { |
| rm -f ${1}.stdout ${1}.temp1 ${1}.temp2 |
| batfile=`${fixpath} ${1}` |
| cmd.exe -Q -C < "$batfile" 1> ${1}.temp1 2> ${1}.temp2 |
| cat ${1}.temp1 | \ |
| sed -e 's@^Microsoft.*@@' \ |
| -e 's@^.*Copyright.*@@' \ |
| -e 's@^.*>REM.*@@' \ |
| -e 's@^.*>set.*@@' \ |
| -e 's@^.*>echo.*@@' \ |
| -e 's@^.*>call.*@@' \ |
| -e 's@^.*>$@@' \ |
| -e 's@\\@/@g' | \ |
| sed -e 's@//@/@g' > $2 |
| if [ -f "${1}.stdout" ] ; then |
| cat ${1}.stdout 1>&2 |
| fi |
| chmod a+x $2 |
| } |
| |
| printEnv() # name pname vsname val |
| { |
| name="$1" |
| pname="$2" |
| vsname="$3" |
| val="$4" |
| if [ "${val}" != "" ] ; then |
| if [ "${shellStyle}" = "csh" ] ; then |
| if [ "${debug}" = "true" ] ; then |
| echo "setenv ${vsname} \"${val}\";" |
| fi |
| echo "setenv ${name} \"${val}\";" |
| elif [ "${shellStyle}" = "sh" ] ; then |
| if [ "${debug}" = "true" ] ; then |
| echo "${vsname}=\"${val}\";" |
| echo "export ${vsname};" |
| fi |
| echo "${name}=\"${val}\";" |
| echo "export ${name};" |
| elif [ "${shellStyle}" = "props" ] ; then |
| echo "vs.${pname}=${val}" |
| fi |
| fi |
| } |
| |
| ############################################################################# |
| |
| # Get Visual Studio settings |
| if [ "${fixpath}" != "" ] ; then |
| |
| # Create bat file to run |
| batfile="${tmp}/vs-to-env.bat" |
| if [ ! -d "${vcBinDir}" ] ; then |
| error "Does not exist: ${vcBinDir}" |
| elif [ "${vcvarsBat}" = "" ] ; then |
| error "No vcvars script: ${vcvarsBat}" |
| else |
| createBat "${batfile}" "${vcBinDir}" "${vcvarsBat}" |
| fi |
| |
| # Run bat file to create environment variable settings |
| envfile="${tmp}/env.sh" |
| createEnv "${batfile}" "${envfile}" |
| |
| # Read in the VS_* settings |
| . ${envfile} |
| |
| # Derive unix style path, save old, and define new (remove dups) |
| VS_UPATH=`${fixpath_path} "${VS_WPATH}"` |
| export VS_UPATH |
| VS_OPATH=`printf "%s" "${PATH}" | sed -e 's@\\\\@/@g'` |
| export VS_OPATH |
| VS_PATH=`removeDeadDups "${VS_UPATH}${pathsepIn}${VS_OPATH}" "${pathsepIn}" "${pathsepOut}"` |
| export VS_PATH |
| |
| fi |
| |
| # Adjustments due to differences in vcvars*bat files |
| if [ "${VS_MSVCDIR}" = "" ] ; then |
| VS_MSVCDIR="${VS_VCINSTALLDIR}" |
| fi |
| if [ "${VS_DEVENVDIR}" = "" ] ; then |
| VS_DEVENVDIR="${VS_VSINSTALLDIR}" |
| fi |
| |
| # Print env settings |
| # env vs.prop vs env value |
| # ------- ------- ---------- ----- |
| printEnv INCLUDE include VS_INCLUDE "${VS_INCLUDE}" |
| printEnv LIB lib VS_LIB "${VS_LIB}" |
| printEnv LIBPATH libpath VS_LIBPATH "${VS_LIBPATH}" |
| if [ "${debug}" = "true" ] ; then |
| printEnv UPATH upath VS_UPATH "${VS_UPATH}" |
| printEnv WPATH wpath VS_WPATH "${VS_WPATH}" |
| printEnv OPATH opath VS_OPATH "${VS_OPATH}" |
| fi |
| printEnv PATH path VS_PATH "${VS_PATH}" |
| printEnv VCINSTALLDIR vcinstalldir VS_VCINSTALLDIR "${VS_VCINSTALLDIR}" |
| printEnv VSINSTALLDIR vsinstalldir VS_VSINSTALLDIR "${VS_VSINSTALLDIR}" |
| printEnv MSVCDIR msvcdir VS_MSVCDIR "${VS_MSVCDIR}" |
| printEnv MSSDK mssdk VS_MSSDK "${VS_MSSDK}" |
| printEnv MSTOOLS mstools VS_MSTOOLS "${VS_MSTOOLS}" |
| printEnv DEVENVDIR devenvdir VS_DEVENVDIR "${VS_DEVENVDIR}" |
| printEnv WINDOWSSDKDIR windowssdkdir VS_WINDOWSSDKDIR "${VS_WINDOWSSDKDIR}" |
| if [ "${vcSelection}" = "11" ] ; then |
| printEnv VS110COMNTOOLS vs110comntools VS_VS110COMNTOOLS "${VS_VS110COMNTOOLS}" |
| elif [ "${vcSelection}" = "10" ] ; then |
| printEnv VS100COMNTOOLS vs100comntools VS_VS100COMNTOOLS "${VS_VS100COMNTOOLS}" |
| elif [ "${vcSelection}" = "9" ] ; then |
| printEnv VS90COMNTOOLS vs90comntools VS_VS90COMNTOOLS "${VS_VS90COMNTOOLS}" |
| elif [ "${vcSelection}" = "7" ] ; then |
| printEnv VS71COMNTOOLS vs71comntools VS_VS71COMNTOOLS "${VS_VS71COMNTOOLS}" |
| elif [ "${vcSelection}" = "8" ] ; then |
| printEnv VS80COMNTOOLS vs80comntools VS_VS80COMNTOOLS "${VS_VS80COMNTOOLS}" |
| fi |
| |
| # Check final settings |
| if [ "${verbose}" = "true" ] ; then |
| checkPaths "Windows PATH" "${VS_WPATH}" ";" |
| checkPaths LIB "${VS_LIB}" ";" |
| checkPaths INCLUDE "${VS_INCLUDE}" ";" |
| checkPaths PATH "${VS_PATH}" "${pathsepIn}" |
| fi |
| |
| # Remove all temp files |
| if [ "${debug}" != "true" ] ; then |
| rm -f -r ${tmp} |
| fi |
| |
| exit 0 |
| |