| /* |
| * Copyright 2000-2009 Sun Microsystems, Inc. All Rights Reserved. |
| * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
| * |
| * This code is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 only, as |
| * published by the Free Software Foundation. |
| * |
| * This code is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * version 2 for more details (a copy is included in the LICENSE file that |
| * accompanied this code). |
| * |
| * You should have received a copy of the GNU General Public License version |
| * 2 along with this work; if not, write to the Free Software Foundation, |
| * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. |
| * |
| * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, |
| * CA 95054 USA or visit www.sun.com if you need additional information or |
| * have any questions. |
| * |
| */ |
| |
| # include "incls/_precompiled.incl" |
| # include "incls/_c1_LIRAssembler_sparc.cpp.incl" |
| |
| #define __ _masm-> |
| |
| |
| //------------------------------------------------------------ |
| |
| |
| bool LIR_Assembler::is_small_constant(LIR_Opr opr) { |
| if (opr->is_constant()) { |
| LIR_Const* constant = opr->as_constant_ptr(); |
| switch (constant->type()) { |
| case T_INT: { |
| jint value = constant->as_jint(); |
| return Assembler::is_simm13(value); |
| } |
| |
| default: |
| return false; |
| } |
| } |
| return false; |
| } |
| |
| |
| bool LIR_Assembler::is_single_instruction(LIR_Op* op) { |
| switch (op->code()) { |
| case lir_null_check: |
| return true; |
| |
| |
| case lir_add: |
| case lir_ushr: |
| case lir_shr: |
| case lir_shl: |
| // integer shifts and adds are always one instruction |
| return op->result_opr()->is_single_cpu(); |
| |
| |
| case lir_move: { |
| LIR_Op1* op1 = op->as_Op1(); |
| LIR_Opr src = op1->in_opr(); |
| LIR_Opr dst = op1->result_opr(); |
| |
| if (src == dst) { |
| NEEDS_CLEANUP; |
| // this works around a problem where moves with the same src and dst |
| // end up in the delay slot and then the assembler swallows the mov |
| // since it has no effect and then it complains because the delay slot |
| // is empty. returning false stops the optimizer from putting this in |
| // the delay slot |
| return false; |
| } |
| |
| // don't put moves involving oops into the delay slot since the VerifyOops code |
| // will make it much larger than a single instruction. |
| if (VerifyOops) { |
| return false; |
| } |
| |
| if (src->is_double_cpu() || dst->is_double_cpu() || op1->patch_code() != lir_patch_none || |
| ((src->is_double_fpu() || dst->is_double_fpu()) && op1->move_kind() != lir_move_normal)) { |
| return false; |
| } |
| |
| if (dst->is_register()) { |
| if (src->is_address() && Assembler::is_simm13(src->as_address_ptr()->disp())) { |
| return !PatchALot; |
| } else if (src->is_single_stack()) { |
| return true; |
| } |
| } |
| |
| if (src->is_register()) { |
| if (dst->is_address() && Assembler::is_simm13(dst->as_address_ptr()->disp())) { |
| return !PatchALot; |
| } else if (dst->is_single_stack()) { |
| return true; |
| } |
| } |
| |
| if (dst->is_register() && |
| ((src->is_register() && src->is_single_word() && src->is_same_type(dst)) || |
| (src->is_constant() && LIR_Assembler::is_small_constant(op->as_Op1()->in_opr())))) { |
| return true; |
| } |
| |
| return false; |
| } |
| |
| default: |
| return false; |
| } |
| ShouldNotReachHere(); |
| } |
| |
| |
| LIR_Opr LIR_Assembler::receiverOpr() { |
| return FrameMap::O0_oop_opr; |
| } |
| |
| |
| LIR_Opr LIR_Assembler::incomingReceiverOpr() { |
| return FrameMap::I0_oop_opr; |
| } |
| |
| |
| LIR_Opr LIR_Assembler::osrBufferPointer() { |
| return FrameMap::I0_opr; |
| } |
| |
| |
| int LIR_Assembler::initial_frame_size_in_bytes() { |
| return in_bytes(frame_map()->framesize_in_bytes()); |
| } |
| |
| |
| // inline cache check: the inline cached class is in G5_inline_cache_reg(G5); |
| // we fetch the class of the receiver (O0) and compare it with the cached class. |
| // If they do not match we jump to slow case. |
| int LIR_Assembler::check_icache() { |
| int offset = __ offset(); |
| __ inline_cache_check(O0, G5_inline_cache_reg); |
| return offset; |
| } |
| |
| |
| void LIR_Assembler::osr_entry() { |
| // On-stack-replacement entry sequence (interpreter frame layout described in interpreter_sparc.cpp): |
| // |
| // 1. Create a new compiled activation. |
| // 2. Initialize local variables in the compiled activation. The expression stack must be empty |
| // at the osr_bci; it is not initialized. |
| // 3. Jump to the continuation address in compiled code to resume execution. |
| |
| // OSR entry point |
| offsets()->set_value(CodeOffsets::OSR_Entry, code_offset()); |
| BlockBegin* osr_entry = compilation()->hir()->osr_entry(); |
| ValueStack* entry_state = osr_entry->end()->state(); |
| int number_of_locks = entry_state->locks_size(); |
| |
| // Create a frame for the compiled activation. |
| __ build_frame(initial_frame_size_in_bytes()); |
| |
| // OSR buffer is |
| // |
| // locals[nlocals-1..0] |
| // monitors[number_of_locks-1..0] |
| // |
| // locals is a direct copy of the interpreter frame so in the osr buffer |
| // so first slot in the local array is the last local from the interpreter |
| // and last slot is local[0] (receiver) from the interpreter |
| // |
| // Similarly with locks. The first lock slot in the osr buffer is the nth lock |
| // from the interpreter frame, the nth lock slot in the osr buffer is 0th lock |
| // in the interpreter frame (the method lock if a sync method) |
| |
| // Initialize monitors in the compiled activation. |
| // I0: pointer to osr buffer |
| // |
| // All other registers are dead at this point and the locals will be |
| // copied into place by code emitted in the IR. |
| |
| Register OSR_buf = osrBufferPointer()->as_register(); |
| { assert(frame::interpreter_frame_monitor_size() == BasicObjectLock::size(), "adjust code below"); |
| int monitor_offset = BytesPerWord * method()->max_locals() + |
| (BasicObjectLock::size() * BytesPerWord) * (number_of_locks - 1); |
| for (int i = 0; i < number_of_locks; i++) { |
| int slot_offset = monitor_offset - ((i * BasicObjectLock::size()) * BytesPerWord); |
| #ifdef ASSERT |
| // verify the interpreter's monitor has a non-null object |
| { |
| Label L; |
| __ ld_ptr(OSR_buf, slot_offset + BasicObjectLock::obj_offset_in_bytes(), O7); |
| __ cmp(G0, O7); |
| __ br(Assembler::notEqual, false, Assembler::pt, L); |
| __ delayed()->nop(); |
| __ stop("locked object is NULL"); |
| __ bind(L); |
| } |
| #endif // ASSERT |
| // Copy the lock field into the compiled activation. |
| __ ld_ptr(OSR_buf, slot_offset + BasicObjectLock::lock_offset_in_bytes(), O7); |
| __ st_ptr(O7, frame_map()->address_for_monitor_lock(i)); |
| __ ld_ptr(OSR_buf, slot_offset + BasicObjectLock::obj_offset_in_bytes(), O7); |
| __ st_ptr(O7, frame_map()->address_for_monitor_object(i)); |
| } |
| } |
| } |
| |
| |
| // Optimized Library calls |
| // This is the fast version of java.lang.String.compare; it has not |
| // OSR-entry and therefore, we generate a slow version for OSR's |
| void LIR_Assembler::emit_string_compare(LIR_Opr left, LIR_Opr right, LIR_Opr dst, CodeEmitInfo* info) { |
| Register str0 = left->as_register(); |
| Register str1 = right->as_register(); |
| |
| Label Ldone; |
| |
| Register result = dst->as_register(); |
| { |
| // Get a pointer to the first character of string0 in tmp0 and get string0.count in str0 |
| // Get a pointer to the first character of string1 in tmp1 and get string1.count in str1 |
| // Also, get string0.count-string1.count in o7 and get the condition code set |
| // Note: some instructions have been hoisted for better instruction scheduling |
| |
| Register tmp0 = L0; |
| Register tmp1 = L1; |
| Register tmp2 = L2; |
| |
| int value_offset = java_lang_String:: value_offset_in_bytes(); // char array |
| int offset_offset = java_lang_String::offset_offset_in_bytes(); // first character position |
| int count_offset = java_lang_String:: count_offset_in_bytes(); |
| |
| __ ld_ptr(str0, value_offset, tmp0); |
| __ ld(str0, offset_offset, tmp2); |
| __ add(tmp0, arrayOopDesc::base_offset_in_bytes(T_CHAR), tmp0); |
| __ ld(str0, count_offset, str0); |
| __ sll(tmp2, exact_log2(sizeof(jchar)), tmp2); |
| |
| // str1 may be null |
| add_debug_info_for_null_check_here(info); |
| |
| __ ld_ptr(str1, value_offset, tmp1); |
| __ add(tmp0, tmp2, tmp0); |
| |
| __ ld(str1, offset_offset, tmp2); |
| __ add(tmp1, arrayOopDesc::base_offset_in_bytes(T_CHAR), tmp1); |
| __ ld(str1, count_offset, str1); |
| __ sll(tmp2, exact_log2(sizeof(jchar)), tmp2); |
| __ subcc(str0, str1, O7); |
| __ add(tmp1, tmp2, tmp1); |
| } |
| |
| { |
| // Compute the minimum of the string lengths, scale it and store it in limit |
| Register count0 = I0; |
| Register count1 = I1; |
| Register limit = L3; |
| |
| Label Lskip; |
| __ sll(count0, exact_log2(sizeof(jchar)), limit); // string0 is shorter |
| __ br(Assembler::greater, true, Assembler::pt, Lskip); |
| __ delayed()->sll(count1, exact_log2(sizeof(jchar)), limit); // string1 is shorter |
| __ bind(Lskip); |
| |
| // If either string is empty (or both of them) the result is the difference in lengths |
| __ cmp(limit, 0); |
| __ br(Assembler::equal, true, Assembler::pn, Ldone); |
| __ delayed()->mov(O7, result); // result is difference in lengths |
| } |
| |
| { |
| // Neither string is empty |
| Label Lloop; |
| |
| Register base0 = L0; |
| Register base1 = L1; |
| Register chr0 = I0; |
| Register chr1 = I1; |
| Register limit = L3; |
| |
| // Shift base0 and base1 to the end of the arrays, negate limit |
| __ add(base0, limit, base0); |
| __ add(base1, limit, base1); |
| __ neg(limit); // limit = -min{string0.count, strin1.count} |
| |
| __ lduh(base0, limit, chr0); |
| __ bind(Lloop); |
| __ lduh(base1, limit, chr1); |
| __ subcc(chr0, chr1, chr0); |
| __ br(Assembler::notZero, false, Assembler::pn, Ldone); |
| assert(chr0 == result, "result must be pre-placed"); |
| __ delayed()->inccc(limit, sizeof(jchar)); |
| __ br(Assembler::notZero, true, Assembler::pt, Lloop); |
| __ delayed()->lduh(base0, limit, chr0); |
| } |
| |
| // If strings are equal up to min length, return the length difference. |
| __ mov(O7, result); |
| |
| // Otherwise, return the difference between the first mismatched chars. |
| __ bind(Ldone); |
| } |
| |
| |
| // -------------------------------------------------------------------------------------------- |
| |
| void LIR_Assembler::monitorexit(LIR_Opr obj_opr, LIR_Opr lock_opr, Register hdr, int monitor_no) { |
| if (!GenerateSynchronizationCode) return; |
| |
| Register obj_reg = obj_opr->as_register(); |
| Register lock_reg = lock_opr->as_register(); |
| |
| Address mon_addr = frame_map()->address_for_monitor_lock(monitor_no); |
| Register reg = mon_addr.base(); |
| int offset = mon_addr.disp(); |
| // compute pointer to BasicLock |
| if (mon_addr.is_simm13()) { |
| __ add(reg, offset, lock_reg); |
| } |
| else { |
| __ set(offset, lock_reg); |
| __ add(reg, lock_reg, lock_reg); |
| } |
| // unlock object |
| MonitorAccessStub* slow_case = new MonitorExitStub(lock_opr, UseFastLocking, monitor_no); |
| // _slow_case_stubs->append(slow_case); |
| // temporary fix: must be created after exceptionhandler, therefore as call stub |
| _slow_case_stubs->append(slow_case); |
| if (UseFastLocking) { |
| // try inlined fast unlocking first, revert to slow locking if it fails |
| // note: lock_reg points to the displaced header since the displaced header offset is 0! |
| assert(BasicLock::displaced_header_offset_in_bytes() == 0, "lock_reg must point to the displaced header"); |
| __ unlock_object(hdr, obj_reg, lock_reg, *slow_case->entry()); |
| } else { |
| // always do slow unlocking |
| // note: the slow unlocking code could be inlined here, however if we use |
| // slow unlocking, speed doesn't matter anyway and this solution is |
| // simpler and requires less duplicated code - additionally, the |
| // slow unlocking code is the same in either case which simplifies |
| // debugging |
| __ br(Assembler::always, false, Assembler::pt, *slow_case->entry()); |
| __ delayed()->nop(); |
| } |
| // done |
| __ bind(*slow_case->continuation()); |
| } |
| |
| |
| void LIR_Assembler::emit_exception_handler() { |
| // if the last instruction is a call (typically to do a throw which |
| // is coming at the end after block reordering) the return address |
| // must still point into the code area in order to avoid assertion |
| // failures when searching for the corresponding bci => add a nop |
| // (was bug 5/14/1999 - gri) |
| __ nop(); |
| |
| // generate code for exception handler |
| ciMethod* method = compilation()->method(); |
| |
| address handler_base = __ start_a_stub(exception_handler_size); |
| |
| if (handler_base == NULL) { |
| // not enough space left for the handler |
| bailout("exception handler overflow"); |
| return; |
| } |
| #ifdef ASSERT |
| int offset = code_offset(); |
| #endif // ASSERT |
| compilation()->offsets()->set_value(CodeOffsets::Exceptions, code_offset()); |
| |
| |
| if (compilation()->has_exception_handlers() || JvmtiExport::can_post_exceptions()) { |
| __ call(Runtime1::entry_for(Runtime1::handle_exception_id), relocInfo::runtime_call_type); |
| __ delayed()->nop(); |
| } |
| |
| __ call(Runtime1::entry_for(Runtime1::unwind_exception_id), relocInfo::runtime_call_type); |
| __ delayed()->nop(); |
| debug_only(__ stop("should have gone to the caller");) |
| assert(code_offset() - offset <= exception_handler_size, "overflow"); |
| |
| __ end_a_stub(); |
| } |
| |
| void LIR_Assembler::emit_deopt_handler() { |
| // if the last instruction is a call (typically to do a throw which |
| // is coming at the end after block reordering) the return address |
| // must still point into the code area in order to avoid assertion |
| // failures when searching for the corresponding bci => add a nop |
| // (was bug 5/14/1999 - gri) |
| __ nop(); |
| |
| // generate code for deopt handler |
| ciMethod* method = compilation()->method(); |
| address handler_base = __ start_a_stub(deopt_handler_size); |
| if (handler_base == NULL) { |
| // not enough space left for the handler |
| bailout("deopt handler overflow"); |
| return; |
| } |
| #ifdef ASSERT |
| int offset = code_offset(); |
| #endif // ASSERT |
| compilation()->offsets()->set_value(CodeOffsets::Deopt, code_offset()); |
| |
| AddressLiteral deopt_blob(SharedRuntime::deopt_blob()->unpack()); |
| |
| __ JUMP(deopt_blob, G3_scratch, 0); // sethi;jmp |
| __ delayed()->nop(); |
| |
| assert(code_offset() - offset <= deopt_handler_size, "overflow"); |
| |
| debug_only(__ stop("should have gone to the caller");) |
| |
| __ end_a_stub(); |
| } |
| |
| |
| void LIR_Assembler::jobject2reg(jobject o, Register reg) { |
| if (o == NULL) { |
| __ set(NULL_WORD, reg); |
| } else { |
| int oop_index = __ oop_recorder()->find_index(o); |
| RelocationHolder rspec = oop_Relocation::spec(oop_index); |
| __ set(NULL_WORD, reg, rspec); // Will be set when the nmethod is created |
| } |
| } |
| |
| |
| void LIR_Assembler::jobject2reg_with_patching(Register reg, CodeEmitInfo *info) { |
| // Allocate a new index in oop table to hold the oop once it's been patched |
| int oop_index = __ oop_recorder()->allocate_index((jobject)NULL); |
| PatchingStub* patch = new PatchingStub(_masm, PatchingStub::load_klass_id, oop_index); |
| |
| AddressLiteral addrlit(NULL, oop_Relocation::spec(oop_index)); |
| assert(addrlit.rspec().type() == relocInfo::oop_type, "must be an oop reloc"); |
| // It may not seem necessary to use a sethi/add pair to load a NULL into dest, but the |
| // NULL will be dynamically patched later and the patched value may be large. We must |
| // therefore generate the sethi/add as a placeholders |
| __ patchable_set(addrlit, reg); |
| |
| patching_epilog(patch, lir_patch_normal, reg, info); |
| } |
| |
| |
| void LIR_Assembler::emit_op3(LIR_Op3* op) { |
| Register Rdividend = op->in_opr1()->as_register(); |
| Register Rdivisor = noreg; |
| Register Rscratch = op->in_opr3()->as_register(); |
| Register Rresult = op->result_opr()->as_register(); |
| int divisor = -1; |
| |
| if (op->in_opr2()->is_register()) { |
| Rdivisor = op->in_opr2()->as_register(); |
| } else { |
| divisor = op->in_opr2()->as_constant_ptr()->as_jint(); |
| assert(Assembler::is_simm13(divisor), "can only handle simm13"); |
| } |
| |
| assert(Rdividend != Rscratch, ""); |
| assert(Rdivisor != Rscratch, ""); |
| assert(op->code() == lir_idiv || op->code() == lir_irem, "Must be irem or idiv"); |
| |
| if (Rdivisor == noreg && is_power_of_2(divisor)) { |
| // convert division by a power of two into some shifts and logical operations |
| if (op->code() == lir_idiv) { |
| if (divisor == 2) { |
| __ srl(Rdividend, 31, Rscratch); |
| } else { |
| __ sra(Rdividend, 31, Rscratch); |
| __ and3(Rscratch, divisor - 1, Rscratch); |
| } |
| __ add(Rdividend, Rscratch, Rscratch); |
| __ sra(Rscratch, log2_intptr(divisor), Rresult); |
| return; |
| } else { |
| if (divisor == 2) { |
| __ srl(Rdividend, 31, Rscratch); |
| } else { |
| __ sra(Rdividend, 31, Rscratch); |
| __ and3(Rscratch, divisor - 1,Rscratch); |
| } |
| __ add(Rdividend, Rscratch, Rscratch); |
| __ andn(Rscratch, divisor - 1,Rscratch); |
| __ sub(Rdividend, Rscratch, Rresult); |
| return; |
| } |
| } |
| |
| __ sra(Rdividend, 31, Rscratch); |
| __ wry(Rscratch); |
| if (!VM_Version::v9_instructions_work()) { |
| // v9 doesn't require these nops |
| __ nop(); |
| __ nop(); |
| __ nop(); |
| __ nop(); |
| } |
| |
| add_debug_info_for_div0_here(op->info()); |
| |
| if (Rdivisor != noreg) { |
| __ sdivcc(Rdividend, Rdivisor, (op->code() == lir_idiv ? Rresult : Rscratch)); |
| } else { |
| assert(Assembler::is_simm13(divisor), "can only handle simm13"); |
| __ sdivcc(Rdividend, divisor, (op->code() == lir_idiv ? Rresult : Rscratch)); |
| } |
| |
| Label skip; |
| __ br(Assembler::overflowSet, true, Assembler::pn, skip); |
| __ delayed()->Assembler::sethi(0x80000000, (op->code() == lir_idiv ? Rresult : Rscratch)); |
| __ bind(skip); |
| |
| if (op->code() == lir_irem) { |
| if (Rdivisor != noreg) { |
| __ smul(Rscratch, Rdivisor, Rscratch); |
| } else { |
| __ smul(Rscratch, divisor, Rscratch); |
| } |
| __ sub(Rdividend, Rscratch, Rresult); |
| } |
| } |
| |
| |
| void LIR_Assembler::emit_opBranch(LIR_OpBranch* op) { |
| #ifdef ASSERT |
| assert(op->block() == NULL || op->block()->label() == op->label(), "wrong label"); |
| if (op->block() != NULL) _branch_target_blocks.append(op->block()); |
| if (op->ublock() != NULL) _branch_target_blocks.append(op->ublock()); |
| #endif |
| assert(op->info() == NULL, "shouldn't have CodeEmitInfo"); |
| |
| if (op->cond() == lir_cond_always) { |
| __ br(Assembler::always, false, Assembler::pt, *(op->label())); |
| } else if (op->code() == lir_cond_float_branch) { |
| assert(op->ublock() != NULL, "must have unordered successor"); |
| bool is_unordered = (op->ublock() == op->block()); |
| Assembler::Condition acond; |
| switch (op->cond()) { |
| case lir_cond_equal: acond = Assembler::f_equal; break; |
| case lir_cond_notEqual: acond = Assembler::f_notEqual; break; |
| case lir_cond_less: acond = (is_unordered ? Assembler::f_unorderedOrLess : Assembler::f_less); break; |
| case lir_cond_greater: acond = (is_unordered ? Assembler::f_unorderedOrGreater : Assembler::f_greater); break; |
| case lir_cond_lessEqual: acond = (is_unordered ? Assembler::f_unorderedOrLessOrEqual : Assembler::f_lessOrEqual); break; |
| case lir_cond_greaterEqual: acond = (is_unordered ? Assembler::f_unorderedOrGreaterOrEqual: Assembler::f_greaterOrEqual); break; |
| default : ShouldNotReachHere(); |
| }; |
| |
| if (!VM_Version::v9_instructions_work()) { |
| __ nop(); |
| } |
| __ fb( acond, false, Assembler::pn, *(op->label())); |
| } else { |
| assert (op->code() == lir_branch, "just checking"); |
| |
| Assembler::Condition acond; |
| switch (op->cond()) { |
| case lir_cond_equal: acond = Assembler::equal; break; |
| case lir_cond_notEqual: acond = Assembler::notEqual; break; |
| case lir_cond_less: acond = Assembler::less; break; |
| case lir_cond_lessEqual: acond = Assembler::lessEqual; break; |
| case lir_cond_greaterEqual: acond = Assembler::greaterEqual; break; |
| case lir_cond_greater: acond = Assembler::greater; break; |
| case lir_cond_aboveEqual: acond = Assembler::greaterEqualUnsigned; break; |
| case lir_cond_belowEqual: acond = Assembler::lessEqualUnsigned; break; |
| default: ShouldNotReachHere(); |
| }; |
| |
| // sparc has different condition codes for testing 32-bit |
| // vs. 64-bit values. We could always test xcc is we could |
| // guarantee that 32-bit loads always sign extended but that isn't |
| // true and since sign extension isn't free, it would impose a |
| // slight cost. |
| #ifdef _LP64 |
| if (op->type() == T_INT) { |
| __ br(acond, false, Assembler::pn, *(op->label())); |
| } else |
| #endif |
| __ brx(acond, false, Assembler::pn, *(op->label())); |
| } |
| // The peephole pass fills the delay slot |
| } |
| |
| |
| void LIR_Assembler::emit_opConvert(LIR_OpConvert* op) { |
| Bytecodes::Code code = op->bytecode(); |
| LIR_Opr dst = op->result_opr(); |
| |
| switch(code) { |
| case Bytecodes::_i2l: { |
| Register rlo = dst->as_register_lo(); |
| Register rhi = dst->as_register_hi(); |
| Register rval = op->in_opr()->as_register(); |
| #ifdef _LP64 |
| __ sra(rval, 0, rlo); |
| #else |
| __ mov(rval, rlo); |
| __ sra(rval, BitsPerInt-1, rhi); |
| #endif |
| break; |
| } |
| case Bytecodes::_i2d: |
| case Bytecodes::_i2f: { |
| bool is_double = (code == Bytecodes::_i2d); |
| FloatRegister rdst = is_double ? dst->as_double_reg() : dst->as_float_reg(); |
| FloatRegisterImpl::Width w = is_double ? FloatRegisterImpl::D : FloatRegisterImpl::S; |
| FloatRegister rsrc = op->in_opr()->as_float_reg(); |
| if (rsrc != rdst) { |
| __ fmov(FloatRegisterImpl::S, rsrc, rdst); |
| } |
| __ fitof(w, rdst, rdst); |
| break; |
| } |
| case Bytecodes::_f2i:{ |
| FloatRegister rsrc = op->in_opr()->as_float_reg(); |
| Address addr = frame_map()->address_for_slot(dst->single_stack_ix()); |
| Label L; |
| // result must be 0 if value is NaN; test by comparing value to itself |
| __ fcmp(FloatRegisterImpl::S, Assembler::fcc0, rsrc, rsrc); |
| if (!VM_Version::v9_instructions_work()) { |
| __ nop(); |
| } |
| __ fb(Assembler::f_unordered, true, Assembler::pn, L); |
| __ delayed()->st(G0, addr); // annuled if contents of rsrc is not NaN |
| __ ftoi(FloatRegisterImpl::S, rsrc, rsrc); |
| // move integer result from float register to int register |
| __ stf(FloatRegisterImpl::S, rsrc, addr.base(), addr.disp()); |
| __ bind (L); |
| break; |
| } |
| case Bytecodes::_l2i: { |
| Register rlo = op->in_opr()->as_register_lo(); |
| Register rhi = op->in_opr()->as_register_hi(); |
| Register rdst = dst->as_register(); |
| #ifdef _LP64 |
| __ sra(rlo, 0, rdst); |
| #else |
| __ mov(rlo, rdst); |
| #endif |
| break; |
| } |
| case Bytecodes::_d2f: |
| case Bytecodes::_f2d: { |
| bool is_double = (code == Bytecodes::_f2d); |
| assert((!is_double && dst->is_single_fpu()) || (is_double && dst->is_double_fpu()), "check"); |
| LIR_Opr val = op->in_opr(); |
| FloatRegister rval = (code == Bytecodes::_d2f) ? val->as_double_reg() : val->as_float_reg(); |
| FloatRegister rdst = is_double ? dst->as_double_reg() : dst->as_float_reg(); |
| FloatRegisterImpl::Width vw = is_double ? FloatRegisterImpl::S : FloatRegisterImpl::D; |
| FloatRegisterImpl::Width dw = is_double ? FloatRegisterImpl::D : FloatRegisterImpl::S; |
| __ ftof(vw, dw, rval, rdst); |
| break; |
| } |
| case Bytecodes::_i2s: |
| case Bytecodes::_i2b: { |
| Register rval = op->in_opr()->as_register(); |
| Register rdst = dst->as_register(); |
| int shift = (code == Bytecodes::_i2b) ? (BitsPerInt - T_BYTE_aelem_bytes * BitsPerByte) : (BitsPerInt - BitsPerShort); |
| __ sll (rval, shift, rdst); |
| __ sra (rdst, shift, rdst); |
| break; |
| } |
| case Bytecodes::_i2c: { |
| Register rval = op->in_opr()->as_register(); |
| Register rdst = dst->as_register(); |
| int shift = BitsPerInt - T_CHAR_aelem_bytes * BitsPerByte; |
| __ sll (rval, shift, rdst); |
| __ srl (rdst, shift, rdst); |
| break; |
| } |
| |
| default: ShouldNotReachHere(); |
| } |
| } |
| |
| |
| void LIR_Assembler::align_call(LIR_Code) { |
| // do nothing since all instructions are word aligned on sparc |
| } |
| |
| |
| void LIR_Assembler::call(address entry, relocInfo::relocType rtype, CodeEmitInfo* info) { |
| __ call(entry, rtype); |
| // the peephole pass fills the delay slot |
| } |
| |
| |
| void LIR_Assembler::ic_call(address entry, CodeEmitInfo* info) { |
| RelocationHolder rspec = virtual_call_Relocation::spec(pc()); |
| __ set_oop((jobject)Universe::non_oop_word(), G5_inline_cache_reg); |
| __ relocate(rspec); |
| __ call(entry, relocInfo::none); |
| // the peephole pass fills the delay slot |
| } |
| |
| |
| void LIR_Assembler::vtable_call(int vtable_offset, CodeEmitInfo* info) { |
| add_debug_info_for_null_check_here(info); |
| __ ld_ptr(O0, oopDesc::klass_offset_in_bytes(), G3_scratch); |
| if (__ is_simm13(vtable_offset) ) { |
| __ ld_ptr(G3_scratch, vtable_offset, G5_method); |
| } else { |
| // This will generate 2 instructions |
| __ set(vtable_offset, G5_method); |
| // ld_ptr, set_hi, set |
| __ ld_ptr(G3_scratch, G5_method, G5_method); |
| } |
| __ ld_ptr(G5_method, methodOopDesc::from_compiled_offset(), G3_scratch); |
| __ callr(G3_scratch, G0); |
| // the peephole pass fills the delay slot |
| } |
| |
| |
| // load with 32-bit displacement |
| int LIR_Assembler::load(Register s, int disp, Register d, BasicType ld_type, CodeEmitInfo *info) { |
| int load_offset = code_offset(); |
| if (Assembler::is_simm13(disp)) { |
| if (info != NULL) add_debug_info_for_null_check_here(info); |
| switch(ld_type) { |
| case T_BOOLEAN: // fall through |
| case T_BYTE : __ ldsb(s, disp, d); break; |
| case T_CHAR : __ lduh(s, disp, d); break; |
| case T_SHORT : __ ldsh(s, disp, d); break; |
| case T_INT : __ ld(s, disp, d); break; |
| case T_ADDRESS:// fall through |
| case T_ARRAY : // fall through |
| case T_OBJECT: __ ld_ptr(s, disp, d); break; |
| default : ShouldNotReachHere(); |
| } |
| } else { |
| __ set(disp, O7); |
| if (info != NULL) add_debug_info_for_null_check_here(info); |
| load_offset = code_offset(); |
| switch(ld_type) { |
| case T_BOOLEAN: // fall through |
| case T_BYTE : __ ldsb(s, O7, d); break; |
| case T_CHAR : __ lduh(s, O7, d); break; |
| case T_SHORT : __ ldsh(s, O7, d); break; |
| case T_INT : __ ld(s, O7, d); break; |
| case T_ADDRESS:// fall through |
| case T_ARRAY : // fall through |
| case T_OBJECT: __ ld_ptr(s, O7, d); break; |
| default : ShouldNotReachHere(); |
| } |
| } |
| if (ld_type == T_ARRAY || ld_type == T_OBJECT) __ verify_oop(d); |
| return load_offset; |
| } |
| |
| |
| // store with 32-bit displacement |
| void LIR_Assembler::store(Register value, Register base, int offset, BasicType type, CodeEmitInfo *info) { |
| if (Assembler::is_simm13(offset)) { |
| if (info != NULL) add_debug_info_for_null_check_here(info); |
| switch (type) { |
| case T_BOOLEAN: // fall through |
| case T_BYTE : __ stb(value, base, offset); break; |
| case T_CHAR : __ sth(value, base, offset); break; |
| case T_SHORT : __ sth(value, base, offset); break; |
| case T_INT : __ stw(value, base, offset); break; |
| case T_ADDRESS:// fall through |
| case T_ARRAY : // fall through |
| case T_OBJECT: __ st_ptr(value, base, offset); break; |
| default : ShouldNotReachHere(); |
| } |
| } else { |
| __ set(offset, O7); |
| if (info != NULL) add_debug_info_for_null_check_here(info); |
| switch (type) { |
| case T_BOOLEAN: // fall through |
| case T_BYTE : __ stb(value, base, O7); break; |
| case T_CHAR : __ sth(value, base, O7); break; |
| case T_SHORT : __ sth(value, base, O7); break; |
| case T_INT : __ stw(value, base, O7); break; |
| case T_ADDRESS:// fall through |
| case T_ARRAY : //fall through |
| case T_OBJECT: __ st_ptr(value, base, O7); break; |
| default : ShouldNotReachHere(); |
| } |
| } |
| // Note: Do the store before verification as the code might be patched! |
| if (type == T_ARRAY || type == T_OBJECT) __ verify_oop(value); |
| } |
| |
| |
| // load float with 32-bit displacement |
| void LIR_Assembler::load(Register s, int disp, FloatRegister d, BasicType ld_type, CodeEmitInfo *info) { |
| FloatRegisterImpl::Width w; |
| switch(ld_type) { |
| case T_FLOAT : w = FloatRegisterImpl::S; break; |
| case T_DOUBLE: w = FloatRegisterImpl::D; break; |
| default : ShouldNotReachHere(); |
| } |
| |
| if (Assembler::is_simm13(disp)) { |
| if (info != NULL) add_debug_info_for_null_check_here(info); |
| if (disp % BytesPerLong != 0 && w == FloatRegisterImpl::D) { |
| __ ldf(FloatRegisterImpl::S, s, disp + BytesPerWord, d->successor()); |
| __ ldf(FloatRegisterImpl::S, s, disp , d); |
| } else { |
| __ ldf(w, s, disp, d); |
| } |
| } else { |
| __ set(disp, O7); |
| if (info != NULL) add_debug_info_for_null_check_here(info); |
| __ ldf(w, s, O7, d); |
| } |
| } |
| |
| |
| // store float with 32-bit displacement |
| void LIR_Assembler::store(FloatRegister value, Register base, int offset, BasicType type, CodeEmitInfo *info) { |
| FloatRegisterImpl::Width w; |
| switch(type) { |
| case T_FLOAT : w = FloatRegisterImpl::S; break; |
| case T_DOUBLE: w = FloatRegisterImpl::D; break; |
| default : ShouldNotReachHere(); |
| } |
| |
| if (Assembler::is_simm13(offset)) { |
| if (info != NULL) add_debug_info_for_null_check_here(info); |
| if (w == FloatRegisterImpl::D && offset % BytesPerLong != 0) { |
| __ stf(FloatRegisterImpl::S, value->successor(), base, offset + BytesPerWord); |
| __ stf(FloatRegisterImpl::S, value , base, offset); |
| } else { |
| __ stf(w, value, base, offset); |
| } |
| } else { |
| __ set(offset, O7); |
| if (info != NULL) add_debug_info_for_null_check_here(info); |
| __ stf(w, value, O7, base); |
| } |
| } |
| |
| |
| int LIR_Assembler::store(LIR_Opr from_reg, Register base, int offset, BasicType type, bool unaligned) { |
| int store_offset; |
| if (!Assembler::is_simm13(offset + (type == T_LONG) ? wordSize : 0)) { |
| assert(!unaligned, "can't handle this"); |
| // for offsets larger than a simm13 we setup the offset in O7 |
| __ set(offset, O7); |
| store_offset = store(from_reg, base, O7, type); |
| } else { |
| if (type == T_ARRAY || type == T_OBJECT) __ verify_oop(from_reg->as_register()); |
| store_offset = code_offset(); |
| switch (type) { |
| case T_BOOLEAN: // fall through |
| case T_BYTE : __ stb(from_reg->as_register(), base, offset); break; |
| case T_CHAR : __ sth(from_reg->as_register(), base, offset); break; |
| case T_SHORT : __ sth(from_reg->as_register(), base, offset); break; |
| case T_INT : __ stw(from_reg->as_register(), base, offset); break; |
| case T_LONG : |
| #ifdef _LP64 |
| if (unaligned || PatchALot) { |
| __ srax(from_reg->as_register_lo(), 32, O7); |
| __ stw(from_reg->as_register_lo(), base, offset + lo_word_offset_in_bytes); |
| __ stw(O7, base, offset + hi_word_offset_in_bytes); |
| } else { |
| __ stx(from_reg->as_register_lo(), base, offset); |
| } |
| #else |
| assert(Assembler::is_simm13(offset + 4), "must be"); |
| __ stw(from_reg->as_register_lo(), base, offset + lo_word_offset_in_bytes); |
| __ stw(from_reg->as_register_hi(), base, offset + hi_word_offset_in_bytes); |
| #endif |
| break; |
| case T_ADDRESS:// fall through |
| case T_ARRAY : // fall through |
| case T_OBJECT: __ st_ptr(from_reg->as_register(), base, offset); break; |
| case T_FLOAT : __ stf(FloatRegisterImpl::S, from_reg->as_float_reg(), base, offset); break; |
| case T_DOUBLE: |
| { |
| FloatRegister reg = from_reg->as_double_reg(); |
| // split unaligned stores |
| if (unaligned || PatchALot) { |
| assert(Assembler::is_simm13(offset + 4), "must be"); |
| __ stf(FloatRegisterImpl::S, reg->successor(), base, offset + 4); |
| __ stf(FloatRegisterImpl::S, reg, base, offset); |
| } else { |
| __ stf(FloatRegisterImpl::D, reg, base, offset); |
| } |
| break; |
| } |
| default : ShouldNotReachHere(); |
| } |
| } |
| return store_offset; |
| } |
| |
| |
| int LIR_Assembler::store(LIR_Opr from_reg, Register base, Register disp, BasicType type) { |
| if (type == T_ARRAY || type == T_OBJECT) __ verify_oop(from_reg->as_register()); |
| int store_offset = code_offset(); |
| switch (type) { |
| case T_BOOLEAN: // fall through |
| case T_BYTE : __ stb(from_reg->as_register(), base, disp); break; |
| case T_CHAR : __ sth(from_reg->as_register(), base, disp); break; |
| case T_SHORT : __ sth(from_reg->as_register(), base, disp); break; |
| case T_INT : __ stw(from_reg->as_register(), base, disp); break; |
| case T_LONG : |
| #ifdef _LP64 |
| __ stx(from_reg->as_register_lo(), base, disp); |
| #else |
| assert(from_reg->as_register_hi()->successor() == from_reg->as_register_lo(), "must match"); |
| __ std(from_reg->as_register_hi(), base, disp); |
| #endif |
| break; |
| case T_ADDRESS:// fall through |
| case T_ARRAY : // fall through |
| case T_OBJECT: __ st_ptr(from_reg->as_register(), base, disp); break; |
| case T_FLOAT : __ stf(FloatRegisterImpl::S, from_reg->as_float_reg(), base, disp); break; |
| case T_DOUBLE: __ stf(FloatRegisterImpl::D, from_reg->as_double_reg(), base, disp); break; |
| default : ShouldNotReachHere(); |
| } |
| return store_offset; |
| } |
| |
| |
| int LIR_Assembler::load(Register base, int offset, LIR_Opr to_reg, BasicType type, bool unaligned) { |
| int load_offset; |
| if (!Assembler::is_simm13(offset + (type == T_LONG) ? wordSize : 0)) { |
| assert(base != O7, "destroying register"); |
| assert(!unaligned, "can't handle this"); |
| // for offsets larger than a simm13 we setup the offset in O7 |
| __ set(offset, O7); |
| load_offset = load(base, O7, to_reg, type); |
| } else { |
| load_offset = code_offset(); |
| switch(type) { |
| case T_BOOLEAN: // fall through |
| case T_BYTE : __ ldsb(base, offset, to_reg->as_register()); break; |
| case T_CHAR : __ lduh(base, offset, to_reg->as_register()); break; |
| case T_SHORT : __ ldsh(base, offset, to_reg->as_register()); break; |
| case T_INT : __ ld(base, offset, to_reg->as_register()); break; |
| case T_LONG : |
| if (!unaligned) { |
| #ifdef _LP64 |
| __ ldx(base, offset, to_reg->as_register_lo()); |
| #else |
| assert(to_reg->as_register_hi()->successor() == to_reg->as_register_lo(), |
| "must be sequential"); |
| __ ldd(base, offset, to_reg->as_register_hi()); |
| #endif |
| } else { |
| #ifdef _LP64 |
| assert(base != to_reg->as_register_lo(), "can't handle this"); |
| __ ld(base, offset + hi_word_offset_in_bytes, to_reg->as_register_lo()); |
| __ sllx(to_reg->as_register_lo(), 32, to_reg->as_register_lo()); |
| __ ld(base, offset + lo_word_offset_in_bytes, to_reg->as_register_lo()); |
| #else |
| if (base == to_reg->as_register_lo()) { |
| __ ld(base, offset + hi_word_offset_in_bytes, to_reg->as_register_hi()); |
| __ ld(base, offset + lo_word_offset_in_bytes, to_reg->as_register_lo()); |
| } else { |
| __ ld(base, offset + lo_word_offset_in_bytes, to_reg->as_register_lo()); |
| __ ld(base, offset + hi_word_offset_in_bytes, to_reg->as_register_hi()); |
| } |
| #endif |
| } |
| break; |
| case T_ADDRESS:// fall through |
| case T_ARRAY : // fall through |
| case T_OBJECT: __ ld_ptr(base, offset, to_reg->as_register()); break; |
| case T_FLOAT: __ ldf(FloatRegisterImpl::S, base, offset, to_reg->as_float_reg()); break; |
| case T_DOUBLE: |
| { |
| FloatRegister reg = to_reg->as_double_reg(); |
| // split unaligned loads |
| if (unaligned || PatchALot) { |
| __ ldf(FloatRegisterImpl::S, base, offset + BytesPerWord, reg->successor()); |
| __ ldf(FloatRegisterImpl::S, base, offset, reg); |
| } else { |
| __ ldf(FloatRegisterImpl::D, base, offset, to_reg->as_double_reg()); |
| } |
| break; |
| } |
| default : ShouldNotReachHere(); |
| } |
| if (type == T_ARRAY || type == T_OBJECT) __ verify_oop(to_reg->as_register()); |
| } |
| return load_offset; |
| } |
| |
| |
| int LIR_Assembler::load(Register base, Register disp, LIR_Opr to_reg, BasicType type) { |
| int load_offset = code_offset(); |
| switch(type) { |
| case T_BOOLEAN: // fall through |
| case T_BYTE : __ ldsb(base, disp, to_reg->as_register()); break; |
| case T_CHAR : __ lduh(base, disp, to_reg->as_register()); break; |
| case T_SHORT : __ ldsh(base, disp, to_reg->as_register()); break; |
| case T_INT : __ ld(base, disp, to_reg->as_register()); break; |
| case T_ADDRESS:// fall through |
| case T_ARRAY : // fall through |
| case T_OBJECT: __ ld_ptr(base, disp, to_reg->as_register()); break; |
| case T_FLOAT: __ ldf(FloatRegisterImpl::S, base, disp, to_reg->as_float_reg()); break; |
| case T_DOUBLE: __ ldf(FloatRegisterImpl::D, base, disp, to_reg->as_double_reg()); break; |
| case T_LONG : |
| #ifdef _LP64 |
| __ ldx(base, disp, to_reg->as_register_lo()); |
| #else |
| assert(to_reg->as_register_hi()->successor() == to_reg->as_register_lo(), |
| "must be sequential"); |
| __ ldd(base, disp, to_reg->as_register_hi()); |
| #endif |
| break; |
| default : ShouldNotReachHere(); |
| } |
| if (type == T_ARRAY || type == T_OBJECT) __ verify_oop(to_reg->as_register()); |
| return load_offset; |
| } |
| |
| |
| // load/store with an Address |
| void LIR_Assembler::load(const Address& a, Register d, BasicType ld_type, CodeEmitInfo *info, int offset) { |
| load(a.base(), a.disp() + offset, d, ld_type, info); |
| } |
| |
| |
| void LIR_Assembler::store(Register value, const Address& dest, BasicType type, CodeEmitInfo *info, int offset) { |
| store(value, dest.base(), dest.disp() + offset, type, info); |
| } |
| |
| |
| // loadf/storef with an Address |
| void LIR_Assembler::load(const Address& a, FloatRegister d, BasicType ld_type, CodeEmitInfo *info, int offset) { |
| load(a.base(), a.disp() + offset, d, ld_type, info); |
| } |
| |
| |
| void LIR_Assembler::store(FloatRegister value, const Address& dest, BasicType type, CodeEmitInfo *info, int offset) { |
| store(value, dest.base(), dest.disp() + offset, type, info); |
| } |
| |
| |
| // load/store with an Address |
| void LIR_Assembler::load(LIR_Address* a, Register d, BasicType ld_type, CodeEmitInfo *info) { |
| load(as_Address(a), d, ld_type, info); |
| } |
| |
| |
| void LIR_Assembler::store(Register value, LIR_Address* dest, BasicType type, CodeEmitInfo *info) { |
| store(value, as_Address(dest), type, info); |
| } |
| |
| |
| // loadf/storef with an Address |
| void LIR_Assembler::load(LIR_Address* a, FloatRegister d, BasicType ld_type, CodeEmitInfo *info) { |
| load(as_Address(a), d, ld_type, info); |
| } |
| |
| |
| void LIR_Assembler::store(FloatRegister value, LIR_Address* dest, BasicType type, CodeEmitInfo *info) { |
| store(value, as_Address(dest), type, info); |
| } |
| |
| |
| void LIR_Assembler::const2stack(LIR_Opr src, LIR_Opr dest) { |
| LIR_Const* c = src->as_constant_ptr(); |
| switch (c->type()) { |
| case T_INT: |
| case T_FLOAT: { |
| Register src_reg = O7; |
| int value = c->as_jint_bits(); |
| if (value == 0) { |
| src_reg = G0; |
| } else { |
| __ set(value, O7); |
| } |
| Address addr = frame_map()->address_for_slot(dest->single_stack_ix()); |
| __ stw(src_reg, addr.base(), addr.disp()); |
| break; |
| } |
| case T_OBJECT: { |
| Register src_reg = O7; |
| jobject2reg(c->as_jobject(), src_reg); |
| Address addr = frame_map()->address_for_slot(dest->single_stack_ix()); |
| __ st_ptr(src_reg, addr.base(), addr.disp()); |
| break; |
| } |
| case T_LONG: |
| case T_DOUBLE: { |
| Address addr = frame_map()->address_for_double_slot(dest->double_stack_ix()); |
| |
| Register tmp = O7; |
| int value_lo = c->as_jint_lo_bits(); |
| if (value_lo == 0) { |
| tmp = G0; |
| } else { |
| __ set(value_lo, O7); |
| } |
| __ stw(tmp, addr.base(), addr.disp() + lo_word_offset_in_bytes); |
| int value_hi = c->as_jint_hi_bits(); |
| if (value_hi == 0) { |
| tmp = G0; |
| } else { |
| __ set(value_hi, O7); |
| } |
| __ stw(tmp, addr.base(), addr.disp() + hi_word_offset_in_bytes); |
| break; |
| } |
| default: |
| Unimplemented(); |
| } |
| } |
| |
| |
| void LIR_Assembler::const2mem(LIR_Opr src, LIR_Opr dest, BasicType type, CodeEmitInfo* info ) { |
| LIR_Const* c = src->as_constant_ptr(); |
| LIR_Address* addr = dest->as_address_ptr(); |
| Register base = addr->base()->as_pointer_register(); |
| |
| if (info != NULL) { |
| add_debug_info_for_null_check_here(info); |
| } |
| switch (c->type()) { |
| case T_INT: |
| case T_FLOAT: { |
| LIR_Opr tmp = FrameMap::O7_opr; |
| int value = c->as_jint_bits(); |
| if (value == 0) { |
| tmp = FrameMap::G0_opr; |
| } else if (Assembler::is_simm13(value)) { |
| __ set(value, O7); |
| } |
| if (addr->index()->is_valid()) { |
| assert(addr->disp() == 0, "must be zero"); |
| store(tmp, base, addr->index()->as_pointer_register(), type); |
| } else { |
| assert(Assembler::is_simm13(addr->disp()), "can't handle larger addresses"); |
| store(tmp, base, addr->disp(), type); |
| } |
| break; |
| } |
| case T_LONG: |
| case T_DOUBLE: { |
| assert(!addr->index()->is_valid(), "can't handle reg reg address here"); |
| assert(Assembler::is_simm13(addr->disp()) && |
| Assembler::is_simm13(addr->disp() + 4), "can't handle larger addresses"); |
| |
| Register tmp = O7; |
| int value_lo = c->as_jint_lo_bits(); |
| if (value_lo == 0) { |
| tmp = G0; |
| } else { |
| __ set(value_lo, O7); |
| } |
| store(tmp, base, addr->disp() + lo_word_offset_in_bytes, T_INT); |
| int value_hi = c->as_jint_hi_bits(); |
| if (value_hi == 0) { |
| tmp = G0; |
| } else { |
| __ set(value_hi, O7); |
| } |
| store(tmp, base, addr->disp() + hi_word_offset_in_bytes, T_INT); |
| break; |
| } |
| case T_OBJECT: { |
| jobject obj = c->as_jobject(); |
| LIR_Opr tmp; |
| if (obj == NULL) { |
| tmp = FrameMap::G0_opr; |
| } else { |
| tmp = FrameMap::O7_opr; |
| jobject2reg(c->as_jobject(), O7); |
| } |
| // handle either reg+reg or reg+disp address |
| if (addr->index()->is_valid()) { |
| assert(addr->disp() == 0, "must be zero"); |
| store(tmp, base, addr->index()->as_pointer_register(), type); |
| } else { |
| assert(Assembler::is_simm13(addr->disp()), "can't handle larger addresses"); |
| store(tmp, base, addr->disp(), type); |
| } |
| |
| break; |
| } |
| default: |
| Unimplemented(); |
| } |
| } |
| |
| |
| void LIR_Assembler::const2reg(LIR_Opr src, LIR_Opr dest, LIR_PatchCode patch_code, CodeEmitInfo* info) { |
| LIR_Const* c = src->as_constant_ptr(); |
| LIR_Opr to_reg = dest; |
| |
| switch (c->type()) { |
| case T_INT: |
| { |
| jint con = c->as_jint(); |
| if (to_reg->is_single_cpu()) { |
| assert(patch_code == lir_patch_none, "no patching handled here"); |
| __ set(con, to_reg->as_register()); |
| } else { |
| ShouldNotReachHere(); |
| assert(to_reg->is_single_fpu(), "wrong register kind"); |
| |
| __ set(con, O7); |
| Address temp_slot(SP, (frame::register_save_words * wordSize) + STACK_BIAS); |
| __ st(O7, temp_slot); |
| __ ldf(FloatRegisterImpl::S, temp_slot, to_reg->as_float_reg()); |
| } |
| } |
| break; |
| |
| case T_LONG: |
| { |
| jlong con = c->as_jlong(); |
| |
| if (to_reg->is_double_cpu()) { |
| #ifdef _LP64 |
| __ set(con, to_reg->as_register_lo()); |
| #else |
| __ set(low(con), to_reg->as_register_lo()); |
| __ set(high(con), to_reg->as_register_hi()); |
| #endif |
| #ifdef _LP64 |
| } else if (to_reg->is_single_cpu()) { |
| __ set(con, to_reg->as_register()); |
| #endif |
| } else { |
| ShouldNotReachHere(); |
| assert(to_reg->is_double_fpu(), "wrong register kind"); |
| Address temp_slot_lo(SP, ((frame::register_save_words ) * wordSize) + STACK_BIAS); |
| Address temp_slot_hi(SP, ((frame::register_save_words) * wordSize) + (longSize/2) + STACK_BIAS); |
| __ set(low(con), O7); |
| __ st(O7, temp_slot_lo); |
| __ set(high(con), O7); |
| __ st(O7, temp_slot_hi); |
| __ ldf(FloatRegisterImpl::D, temp_slot_lo, to_reg->as_double_reg()); |
| } |
| } |
| break; |
| |
| case T_OBJECT: |
| { |
| if (patch_code == lir_patch_none) { |
| jobject2reg(c->as_jobject(), to_reg->as_register()); |
| } else { |
| jobject2reg_with_patching(to_reg->as_register(), info); |
| } |
| } |
| break; |
| |
| case T_FLOAT: |
| { |
| address const_addr = __ float_constant(c->as_jfloat()); |
| if (const_addr == NULL) { |
| bailout("const section overflow"); |
| break; |
| } |
| RelocationHolder rspec = internal_word_Relocation::spec(const_addr); |
| AddressLiteral const_addrlit(const_addr, rspec); |
| if (to_reg->is_single_fpu()) { |
| __ patchable_sethi(const_addrlit, O7); |
| __ relocate(rspec); |
| __ ldf(FloatRegisterImpl::S, O7, const_addrlit.low10(), to_reg->as_float_reg()); |
| |
| } else { |
| assert(to_reg->is_single_cpu(), "Must be a cpu register."); |
| |
| __ set(const_addrlit, O7); |
| load(O7, 0, to_reg->as_register(), T_INT); |
| } |
| } |
| break; |
| |
| case T_DOUBLE: |
| { |
| address const_addr = __ double_constant(c->as_jdouble()); |
| if (const_addr == NULL) { |
| bailout("const section overflow"); |
| break; |
| } |
| RelocationHolder rspec = internal_word_Relocation::spec(const_addr); |
| |
| if (to_reg->is_double_fpu()) { |
| AddressLiteral const_addrlit(const_addr, rspec); |
| __ patchable_sethi(const_addrlit, O7); |
| __ relocate(rspec); |
| __ ldf (FloatRegisterImpl::D, O7, const_addrlit.low10(), to_reg->as_double_reg()); |
| } else { |
| assert(to_reg->is_double_cpu(), "Must be a long register."); |
| #ifdef _LP64 |
| __ set(jlong_cast(c->as_jdouble()), to_reg->as_register_lo()); |
| #else |
| __ set(low(jlong_cast(c->as_jdouble())), to_reg->as_register_lo()); |
| __ set(high(jlong_cast(c->as_jdouble())), to_reg->as_register_hi()); |
| #endif |
| } |
| |
| } |
| break; |
| |
| default: |
| ShouldNotReachHere(); |
| } |
| } |
| |
| Address LIR_Assembler::as_Address(LIR_Address* addr) { |
| Register reg = addr->base()->as_register(); |
| return Address(reg, addr->disp()); |
| } |
| |
| |
| void LIR_Assembler::stack2stack(LIR_Opr src, LIR_Opr dest, BasicType type) { |
| switch (type) { |
| case T_INT: |
| case T_FLOAT: { |
| Register tmp = O7; |
| Address from = frame_map()->address_for_slot(src->single_stack_ix()); |
| Address to = frame_map()->address_for_slot(dest->single_stack_ix()); |
| __ lduw(from.base(), from.disp(), tmp); |
| __ stw(tmp, to.base(), to.disp()); |
| break; |
| } |
| case T_OBJECT: { |
| Register tmp = O7; |
| Address from = frame_map()->address_for_slot(src->single_stack_ix()); |
| Address to = frame_map()->address_for_slot(dest->single_stack_ix()); |
| __ ld_ptr(from.base(), from.disp(), tmp); |
| __ st_ptr(tmp, to.base(), to.disp()); |
| break; |
| } |
| case T_LONG: |
| case T_DOUBLE: { |
| Register tmp = O7; |
| Address from = frame_map()->address_for_double_slot(src->double_stack_ix()); |
| Address to = frame_map()->address_for_double_slot(dest->double_stack_ix()); |
| __ lduw(from.base(), from.disp(), tmp); |
| __ stw(tmp, to.base(), to.disp()); |
| __ lduw(from.base(), from.disp() + 4, tmp); |
| __ stw(tmp, to.base(), to.disp() + 4); |
| break; |
| } |
| |
| default: |
| ShouldNotReachHere(); |
| } |
| } |
| |
| |
| Address LIR_Assembler::as_Address_hi(LIR_Address* addr) { |
| Address base = as_Address(addr); |
| return Address(base.base(), base.disp() + hi_word_offset_in_bytes); |
| } |
| |
| |
| Address LIR_Assembler::as_Address_lo(LIR_Address* addr) { |
| Address base = as_Address(addr); |
| return Address(base.base(), base.disp() + lo_word_offset_in_bytes); |
| } |
| |
| |
| void LIR_Assembler::mem2reg(LIR_Opr src_opr, LIR_Opr dest, BasicType type, |
| LIR_PatchCode patch_code, CodeEmitInfo* info, bool unaligned) { |
| |
| LIR_Address* addr = src_opr->as_address_ptr(); |
| LIR_Opr to_reg = dest; |
| |
| Register src = addr->base()->as_pointer_register(); |
| Register disp_reg = noreg; |
| int disp_value = addr->disp(); |
| bool needs_patching = (patch_code != lir_patch_none); |
| |
| if (addr->base()->type() == T_OBJECT) { |
| __ verify_oop(src); |
| } |
| |
| PatchingStub* patch = NULL; |
| if (needs_patching) { |
| patch = new PatchingStub(_masm, PatchingStub::access_field_id); |
| assert(!to_reg->is_double_cpu() || |
| patch_code == lir_patch_none || |
| patch_code == lir_patch_normal, "patching doesn't match register"); |
| } |
| |
| if (addr->index()->is_illegal()) { |
| if (!Assembler::is_simm13(disp_value) && (!unaligned || Assembler::is_simm13(disp_value + 4))) { |
| if (needs_patching) { |
| __ patchable_set(0, O7); |
| } else { |
| __ set(disp_value, O7); |
| } |
| disp_reg = O7; |
| } |
| } else if (unaligned || PatchALot) { |
| __ add(src, addr->index()->as_register(), O7); |
| src = O7; |
| } else { |
| disp_reg = addr->index()->as_pointer_register(); |
| assert(disp_value == 0, "can't handle 3 operand addresses"); |
| } |
| |
| // remember the offset of the load. The patching_epilog must be done |
| // before the call to add_debug_info, otherwise the PcDescs don't get |
| // entered in increasing order. |
| int offset = code_offset(); |
| |
| assert(disp_reg != noreg || Assembler::is_simm13(disp_value), "should have set this up"); |
| if (disp_reg == noreg) { |
| offset = load(src, disp_value, to_reg, type, unaligned); |
| } else { |
| assert(!unaligned, "can't handle this"); |
| offset = load(src, disp_reg, to_reg, type); |
| } |
| |
| if (patch != NULL) { |
| patching_epilog(patch, patch_code, src, info); |
| } |
| |
| if (info != NULL) add_debug_info_for_null_check(offset, info); |
| } |
| |
| |
| void LIR_Assembler::prefetchr(LIR_Opr src) { |
| LIR_Address* addr = src->as_address_ptr(); |
| Address from_addr = as_Address(addr); |
| |
| if (VM_Version::has_v9()) { |
| __ prefetch(from_addr, Assembler::severalReads); |
| } |
| } |
| |
| |
| void LIR_Assembler::prefetchw(LIR_Opr src) { |
| LIR_Address* addr = src->as_address_ptr(); |
| Address from_addr = as_Address(addr); |
| |
| if (VM_Version::has_v9()) { |
| __ prefetch(from_addr, Assembler::severalWritesAndPossiblyReads); |
| } |
| } |
| |
| |
| void LIR_Assembler::stack2reg(LIR_Opr src, LIR_Opr dest, BasicType type) { |
| Address addr; |
| if (src->is_single_word()) { |
| addr = frame_map()->address_for_slot(src->single_stack_ix()); |
| } else if (src->is_double_word()) { |
| addr = frame_map()->address_for_double_slot(src->double_stack_ix()); |
| } |
| |
| bool unaligned = (addr.disp() - STACK_BIAS) % 8 != 0; |
| load(addr.base(), addr.disp(), dest, dest->type(), unaligned); |
| } |
| |
| |
| void LIR_Assembler::reg2stack(LIR_Opr from_reg, LIR_Opr dest, BasicType type, bool pop_fpu_stack) { |
| Address addr; |
| if (dest->is_single_word()) { |
| addr = frame_map()->address_for_slot(dest->single_stack_ix()); |
| } else if (dest->is_double_word()) { |
| addr = frame_map()->address_for_slot(dest->double_stack_ix()); |
| } |
| bool unaligned = (addr.disp() - STACK_BIAS) % 8 != 0; |
| store(from_reg, addr.base(), addr.disp(), from_reg->type(), unaligned); |
| } |
| |
| |
| void LIR_Assembler::reg2reg(LIR_Opr from_reg, LIR_Opr to_reg) { |
| if (from_reg->is_float_kind() && to_reg->is_float_kind()) { |
| if (from_reg->is_double_fpu()) { |
| // double to double moves |
| assert(to_reg->is_double_fpu(), "should match"); |
| __ fmov(FloatRegisterImpl::D, from_reg->as_double_reg(), to_reg->as_double_reg()); |
| } else { |
| // float to float moves |
| assert(to_reg->is_single_fpu(), "should match"); |
| __ fmov(FloatRegisterImpl::S, from_reg->as_float_reg(), to_reg->as_float_reg()); |
| } |
| } else if (!from_reg->is_float_kind() && !to_reg->is_float_kind()) { |
| if (from_reg->is_double_cpu()) { |
| #ifdef _LP64 |
| __ mov(from_reg->as_pointer_register(), to_reg->as_pointer_register()); |
| #else |
| assert(to_reg->is_double_cpu() && |
| from_reg->as_register_hi() != to_reg->as_register_lo() && |
| from_reg->as_register_lo() != to_reg->as_register_hi(), |
| "should both be long and not overlap"); |
| // long to long moves |
| __ mov(from_reg->as_register_hi(), to_reg->as_register_hi()); |
| __ mov(from_reg->as_register_lo(), to_reg->as_register_lo()); |
| #endif |
| #ifdef _LP64 |
| } else if (to_reg->is_double_cpu()) { |
| // int to int moves |
| __ mov(from_reg->as_register(), to_reg->as_register_lo()); |
| #endif |
| } else { |
| // int to int moves |
| __ mov(from_reg->as_register(), to_reg->as_register()); |
| } |
| } else { |
| ShouldNotReachHere(); |
| } |
| if (to_reg->type() == T_OBJECT || to_reg->type() == T_ARRAY) { |
| __ verify_oop(to_reg->as_register()); |
| } |
| } |
| |
| |
| void LIR_Assembler::reg2mem(LIR_Opr from_reg, LIR_Opr dest, BasicType type, |
| LIR_PatchCode patch_code, CodeEmitInfo* info, bool pop_fpu_stack, |
| bool unaligned) { |
| LIR_Address* addr = dest->as_address_ptr(); |
| |
| Register src = addr->base()->as_pointer_register(); |
| Register disp_reg = noreg; |
| int disp_value = addr->disp(); |
| bool needs_patching = (patch_code != lir_patch_none); |
| |
| if (addr->base()->is_oop_register()) { |
| __ verify_oop(src); |
| } |
| |
| PatchingStub* patch = NULL; |
| if (needs_patching) { |
| patch = new PatchingStub(_masm, PatchingStub::access_field_id); |
| assert(!from_reg->is_double_cpu() || |
| patch_code == lir_patch_none || |
| patch_code == lir_patch_normal, "patching doesn't match register"); |
| } |
| |
| if (addr->index()->is_illegal()) { |
| if (!Assembler::is_simm13(disp_value) && (!unaligned || Assembler::is_simm13(disp_value + 4))) { |
| if (needs_patching) { |
| __ patchable_set(0, O7); |
| } else { |
| __ set(disp_value, O7); |
| } |
| disp_reg = O7; |
| } |
| } else if (unaligned || PatchALot) { |
| __ add(src, addr->index()->as_register(), O7); |
| src = O7; |
| } else { |
| disp_reg = addr->index()->as_pointer_register(); |
| assert(disp_value == 0, "can't handle 3 operand addresses"); |
| } |
| |
| // remember the offset of the store. The patching_epilog must be done |
| // before the call to add_debug_info_for_null_check, otherwise the PcDescs don't get |
| // entered in increasing order. |
| int offset; |
| |
| assert(disp_reg != noreg || Assembler::is_simm13(disp_value), "should have set this up"); |
| if (disp_reg == noreg) { |
| offset = store(from_reg, src, disp_value, type, unaligned); |
| } else { |
| assert(!unaligned, "can't handle this"); |
| offset = store(from_reg, src, disp_reg, type); |
| } |
| |
| if (patch != NULL) { |
| patching_epilog(patch, patch_code, src, info); |
| } |
| |
| if (info != NULL) add_debug_info_for_null_check(offset, info); |
| } |
| |
| |
| void LIR_Assembler::return_op(LIR_Opr result) { |
| // the poll may need a register so just pick one that isn't the return register |
| #ifdef TIERED |
| if (result->type_field() == LIR_OprDesc::long_type) { |
| // Must move the result to G1 |
| // Must leave proper result in O0,O1 and G1 (TIERED only) |
| __ sllx(I0, 32, G1); // Shift bits into high G1 |
| __ srl (I1, 0, I1); // Zero extend O1 (harmless?) |
| __ or3 (I1, G1, G1); // OR 64 bits into G1 |
| } |
| #endif // TIERED |
| __ set((intptr_t)os::get_polling_page(), L0); |
| __ relocate(relocInfo::poll_return_type); |
| __ ld_ptr(L0, 0, G0); |
| __ ret(); |
| __ delayed()->restore(); |
| } |
| |
| |
| int LIR_Assembler::safepoint_poll(LIR_Opr tmp, CodeEmitInfo* info) { |
| __ set((intptr_t)os::get_polling_page(), tmp->as_register()); |
| if (info != NULL) { |
| add_debug_info_for_branch(info); |
| } else { |
| __ relocate(relocInfo::poll_type); |
| } |
| |
| int offset = __ offset(); |
| __ ld_ptr(tmp->as_register(), 0, G0); |
| |
| return offset; |
| } |
| |
| |
| void LIR_Assembler::emit_static_call_stub() { |
| address call_pc = __ pc(); |
| address stub = __ start_a_stub(call_stub_size); |
| if (stub == NULL) { |
| bailout("static call stub overflow"); |
| return; |
| } |
| |
| int start = __ offset(); |
| __ relocate(static_stub_Relocation::spec(call_pc)); |
| |
| __ set_oop(NULL, G5); |
| // must be set to -1 at code generation time |
| AddressLiteral addrlit(-1); |
| __ jump_to(addrlit, G3); |
| __ delayed()->nop(); |
| |
| assert(__ offset() - start <= call_stub_size, "stub too big"); |
| __ end_a_stub(); |
| } |
| |
| |
| void LIR_Assembler::comp_op(LIR_Condition condition, LIR_Opr opr1, LIR_Opr opr2, LIR_Op2* op) { |
| if (opr1->is_single_fpu()) { |
| __ fcmp(FloatRegisterImpl::S, Assembler::fcc0, opr1->as_float_reg(), opr2->as_float_reg()); |
| } else if (opr1->is_double_fpu()) { |
| __ fcmp(FloatRegisterImpl::D, Assembler::fcc0, opr1->as_double_reg(), opr2->as_double_reg()); |
| } else if (opr1->is_single_cpu()) { |
| if (opr2->is_constant()) { |
| switch (opr2->as_constant_ptr()->type()) { |
| case T_INT: |
| { jint con = opr2->as_constant_ptr()->as_jint(); |
| if (Assembler::is_simm13(con)) { |
| __ cmp(opr1->as_register(), con); |
| } else { |
| __ set(con, O7); |
| __ cmp(opr1->as_register(), O7); |
| } |
| } |
| break; |
| |
| case T_OBJECT: |
| // there are only equal/notequal comparisions on objects |
| { jobject con = opr2->as_constant_ptr()->as_jobject(); |
| if (con == NULL) { |
| __ cmp(opr1->as_register(), 0); |
| } else { |
| jobject2reg(con, O7); |
| __ cmp(opr1->as_register(), O7); |
| } |
| } |
| break; |
| |
| default: |
| ShouldNotReachHere(); |
| break; |
| } |
| } else { |
| if (opr2->is_address()) { |
| LIR_Address * addr = opr2->as_address_ptr(); |
| BasicType type = addr->type(); |
| if ( type == T_OBJECT ) __ ld_ptr(as_Address(addr), O7); |
| else __ ld(as_Address(addr), O7); |
| __ cmp(opr1->as_register(), O7); |
| } else { |
| __ cmp(opr1->as_register(), opr2->as_register()); |
| } |
| } |
| } else if (opr1->is_double_cpu()) { |
| Register xlo = opr1->as_register_lo(); |
| Register xhi = opr1->as_register_hi(); |
| if (opr2->is_constant() && opr2->as_jlong() == 0) { |
| assert(condition == lir_cond_equal || condition == lir_cond_notEqual, "only handles these cases"); |
| #ifdef _LP64 |
| __ orcc(xhi, G0, G0); |
| #else |
| __ orcc(xhi, xlo, G0); |
| #endif |
| } else if (opr2->is_register()) { |
| Register ylo = opr2->as_register_lo(); |
| Register yhi = opr2->as_register_hi(); |
| #ifdef _LP64 |
| __ cmp(xlo, ylo); |
| #else |
| __ subcc(xlo, ylo, xlo); |
| __ subccc(xhi, yhi, xhi); |
| if (condition == lir_cond_equal || condition == lir_cond_notEqual) { |
| __ orcc(xhi, xlo, G0); |
| } |
| #endif |
| } else { |
| ShouldNotReachHere(); |
| } |
| } else if (opr1->is_address()) { |
| LIR_Address * addr = opr1->as_address_ptr(); |
| BasicType type = addr->type(); |
| assert (opr2->is_constant(), "Checking"); |
| if ( type == T_OBJECT ) __ ld_ptr(as_Address(addr), O7); |
| else __ ld(as_Address(addr), O7); |
| __ cmp(O7, opr2->as_constant_ptr()->as_jint()); |
| } else { |
| ShouldNotReachHere(); |
| } |
| } |
| |
| |
| void LIR_Assembler::comp_fl2i(LIR_Code code, LIR_Opr left, LIR_Opr right, LIR_Opr dst, LIR_Op2* op){ |
| if (code == lir_cmp_fd2i || code == lir_ucmp_fd2i) { |
| bool is_unordered_less = (code == lir_ucmp_fd2i); |
| if (left->is_single_fpu()) { |
| __ float_cmp(true, is_unordered_less ? -1 : 1, left->as_float_reg(), right->as_float_reg(), dst->as_register()); |
| } else if (left->is_double_fpu()) { |
| __ float_cmp(false, is_unordered_less ? -1 : 1, left->as_double_reg(), right->as_double_reg(), dst->as_register()); |
| } else { |
| ShouldNotReachHere(); |
| } |
| } else if (code == lir_cmp_l2i) { |
| __ lcmp(left->as_register_hi(), left->as_register_lo(), |
| right->as_register_hi(), right->as_register_lo(), |
| dst->as_register()); |
| } else { |
| ShouldNotReachHere(); |
| } |
| } |
| |
| |
| void LIR_Assembler::cmove(LIR_Condition condition, LIR_Opr opr1, LIR_Opr opr2, LIR_Opr result) { |
| |
| Assembler::Condition acond; |
| switch (condition) { |
| case lir_cond_equal: acond = Assembler::equal; break; |
| case lir_cond_notEqual: acond = Assembler::notEqual; break; |
| case lir_cond_less: acond = Assembler::less; break; |
| case lir_cond_lessEqual: acond = Assembler::lessEqual; break; |
| case lir_cond_greaterEqual: acond = Assembler::greaterEqual; break; |
| case lir_cond_greater: acond = Assembler::greater; break; |
| case lir_cond_aboveEqual: acond = Assembler::greaterEqualUnsigned; break; |
| case lir_cond_belowEqual: acond = Assembler::lessEqualUnsigned; break; |
| default: ShouldNotReachHere(); |
| }; |
| |
| if (opr1->is_constant() && opr1->type() == T_INT) { |
| Register dest = result->as_register(); |
| // load up first part of constant before branch |
| // and do the rest in the delay slot. |
| if (!Assembler::is_simm13(opr1->as_jint())) { |
| __ sethi(opr1->as_jint(), dest); |
| } |
| } else if (opr1->is_constant()) { |
| const2reg(opr1, result, lir_patch_none, NULL); |
| } else if (opr1->is_register()) { |
| reg2reg(opr1, result); |
| } else if (opr1->is_stack()) { |
| stack2reg(opr1, result, result->type()); |
| } else { |
| ShouldNotReachHere(); |
| } |
| Label skip; |
| __ br(acond, false, Assembler::pt, skip); |
| if (opr1->is_constant() && opr1->type() == T_INT) { |
| Register dest = result->as_register(); |
| if (Assembler::is_simm13(opr1->as_jint())) { |
| __ delayed()->or3(G0, opr1->as_jint(), dest); |
| } else { |
| // the sethi has been done above, so just put in the low 10 bits |
| __ delayed()->or3(dest, opr1->as_jint() & 0x3ff, dest); |
| } |
| } else { |
| // can't do anything useful in the delay slot |
| __ delayed()->nop(); |
| } |
| if (opr2->is_constant()) { |
| const2reg(opr2, result, lir_patch_none, NULL); |
| } else if (opr2->is_register()) { |
| reg2reg(opr2, result); |
| } else if (opr2->is_stack()) { |
| stack2reg(opr2, result, result->type()); |
| } else { |
| ShouldNotReachHere(); |
| } |
| __ bind(skip); |
| } |
| |
| |
| void LIR_Assembler::arith_op(LIR_Code code, LIR_Opr left, LIR_Opr right, LIR_Opr dest, CodeEmitInfo* info, bool pop_fpu_stack) { |
| assert(info == NULL, "unused on this code path"); |
| assert(left->is_register(), "wrong items state"); |
| assert(dest->is_register(), "wrong items state"); |
| |
| if (right->is_register()) { |
| if (dest->is_float_kind()) { |
| |
| FloatRegister lreg, rreg, res; |
| FloatRegisterImpl::Width w; |
| if (right->is_single_fpu()) { |
| w = FloatRegisterImpl::S; |
| lreg = left->as_float_reg(); |
| rreg = right->as_float_reg(); |
| res = dest->as_float_reg(); |
| } else { |
| w = FloatRegisterImpl::D; |
| lreg = left->as_double_reg(); |
| rreg = right->as_double_reg(); |
| res = dest->as_double_reg(); |
| } |
| |
| switch (code) { |
| case lir_add: __ fadd(w, lreg, rreg, res); break; |
| case lir_sub: __ fsub(w, lreg, rreg, res); break; |
| case lir_mul: // fall through |
| case lir_mul_strictfp: __ fmul(w, lreg, rreg, res); break; |
| case lir_div: // fall through |
| case lir_div_strictfp: __ fdiv(w, lreg, rreg, res); break; |
| default: ShouldNotReachHere(); |
| } |
| |
| } else if (dest->is_double_cpu()) { |
| #ifdef _LP64 |
| Register dst_lo = dest->as_register_lo(); |
| Register op1_lo = left->as_pointer_register(); |
| Register op2_lo = right->as_pointer_register(); |
| |
| switch (code) { |
| case lir_add: |
| __ add(op1_lo, op2_lo, dst_lo); |
| break; |
| |
| case lir_sub: |
| __ sub(op1_lo, op2_lo, dst_lo); |
| break; |
| |
| default: ShouldNotReachHere(); |
| } |
| #else |
| Register op1_lo = left->as_register_lo(); |
| Register op1_hi = left->as_register_hi(); |
| Register op2_lo = right->as_register_lo(); |
| Register op2_hi = right->as_register_hi(); |
| Register dst_lo = dest->as_register_lo(); |
| Register dst_hi = dest->as_register_hi(); |
| |
| switch (code) { |
| case lir_add: |
| __ addcc(op1_lo, op2_lo, dst_lo); |
| __ addc (op1_hi, op2_hi, dst_hi); |
| break; |
| |
| case lir_sub: |
| __ subcc(op1_lo, op2_lo, dst_lo); |
| __ subc (op1_hi, op2_hi, dst_hi); |
| break; |
| |
| default: ShouldNotReachHere(); |
| } |
| #endif |
| } else { |
| assert (right->is_single_cpu(), "Just Checking"); |
| |
| Register lreg = left->as_register(); |
| Register res = dest->as_register(); |
| Register rreg = right->as_register(); |
| switch (code) { |
| case lir_add: __ add (lreg, rreg, res); break; |
| case lir_sub: __ sub (lreg, rreg, res); break; |
| case lir_mul: __ mult (lreg, rreg, res); break; |
| default: ShouldNotReachHere(); |
| } |
| } |
| } else { |
| assert (right->is_constant(), "must be constant"); |
| |
| if (dest->is_single_cpu()) { |
| Register lreg = left->as_register(); |
| Register res = dest->as_register(); |
| int simm13 = right->as_constant_ptr()->as_jint(); |
| |
| switch (code) { |
| case lir_add: __ add (lreg, simm13, res); break; |
| case lir_sub: __ sub (lreg, simm13, res); break; |
| case lir_mul: __ mult (lreg, simm13, res); break; |
| default: ShouldNotReachHere(); |
| } |
| } else { |
| Register lreg = left->as_pointer_register(); |
| Register res = dest->as_register_lo(); |
| long con = right->as_constant_ptr()->as_jlong(); |
| assert(Assembler::is_simm13(con), "must be simm13"); |
| |
| switch (code) { |
| case lir_add: __ add (lreg, (int)con, res); break; |
| case lir_sub: __ sub (lreg, (int)con, res); break; |
| case lir_mul: __ mult (lreg, (int)con, res); break; |
| default: ShouldNotReachHere(); |
| } |
| } |
| } |
| } |
| |
| |
| void LIR_Assembler::fpop() { |
| // do nothing |
| } |
| |
| |
| void LIR_Assembler::intrinsic_op(LIR_Code code, LIR_Opr value, LIR_Opr thread, LIR_Opr dest, LIR_Op* op) { |
| switch (code) { |
| case lir_sin: |
| case lir_tan: |
| case lir_cos: { |
| assert(thread->is_valid(), "preserve the thread object for performance reasons"); |
| assert(dest->as_double_reg() == F0, "the result will be in f0/f1"); |
| break; |
| } |
| case lir_sqrt: { |
| assert(!thread->is_valid(), "there is no need for a thread_reg for dsqrt"); |
| FloatRegister src_reg = value->as_double_reg(); |
| FloatRegister dst_reg = dest->as_double_reg(); |
| __ fsqrt(FloatRegisterImpl::D, src_reg, dst_reg); |
| break; |
| } |
| case lir_abs: { |
| assert(!thread->is_valid(), "there is no need for a thread_reg for fabs"); |
| FloatRegister src_reg = value->as_double_reg(); |
| FloatRegister dst_reg = dest->as_double_reg(); |
| __ fabs(FloatRegisterImpl::D, src_reg, dst_reg); |
| break; |
| } |
| default: { |
| ShouldNotReachHere(); |
| break; |
| } |
| } |
| } |
| |
| |
| void LIR_Assembler::logic_op(LIR_Code code, LIR_Opr left, LIR_Opr right, LIR_Opr dest) { |
| if (right->is_constant()) { |
| if (dest->is_single_cpu()) { |
| int simm13 = right->as_constant_ptr()->as_jint(); |
| switch (code) { |
| case lir_logic_and: __ and3 (left->as_register(), simm13, dest->as_register()); break; |
| case lir_logic_or: __ or3 (left->as_register(), simm13, dest->as_register()); break; |
| case lir_logic_xor: __ xor3 (left->as_register(), simm13, dest->as_register()); break; |
| default: ShouldNotReachHere(); |
| } |
| } else { |
| long c = right->as_constant_ptr()->as_jlong(); |
| assert(c == (int)c && Assembler::is_simm13(c), "out of range"); |
| int simm13 = (int)c; |
| switch (code) { |
| case lir_logic_and: |
| #ifndef _LP64 |
| __ and3 (left->as_register_hi(), 0, dest->as_register_hi()); |
| #endif |
| __ and3 (left->as_register_lo(), simm13, dest->as_register_lo()); |
| break; |
| |
| case lir_logic_or: |
| #ifndef _LP64 |
| __ or3 (left->as_register_hi(), 0, dest->as_register_hi()); |
| #endif |
| __ or3 (left->as_register_lo(), simm13, dest->as_register_lo()); |
| break; |
| |
| case lir_logic_xor: |
| #ifndef _LP64 |
| __ xor3 (left->as_register_hi(), 0, dest->as_register_hi()); |
| #endif |
| __ xor3 (left->as_register_lo(), simm13, dest->as_register_lo()); |
| break; |
| |
| default: ShouldNotReachHere(); |
| } |
| } |
| } else { |
| assert(right->is_register(), "right should be in register"); |
| |
| if (dest->is_single_cpu()) { |
| switch (code) { |
| case lir_logic_and: __ and3 (left->as_register(), right->as_register(), dest->as_register()); break; |
| case lir_logic_or: __ or3 (left->as_register(), right->as_register(), dest->as_register()); break; |
| case lir_logic_xor: __ xor3 (left->as_register(), right->as_register(), dest->as_register()); break; |
| default: ShouldNotReachHere(); |
| } |
| } else { |
| #ifdef _LP64 |
| Register l = (left->is_single_cpu() && left->is_oop_register()) ? left->as_register() : |
| left->as_register_lo(); |
| Register r = (right->is_single_cpu() && right->is_oop_register()) ? right->as_register() : |
| right->as_register_lo(); |
| |
| switch (code) { |
| case lir_logic_and: __ and3 (l, r, dest->as_register_lo()); break; |
| case lir_logic_or: __ or3 (l, r, dest->as_register_lo()); break; |
| case lir_logic_xor: __ xor3 (l, r, dest->as_register_lo()); break; |
| default: ShouldNotReachHere(); |
| } |
| #else |
| switch (code) { |
| case lir_logic_and: |
| __ and3 (left->as_register_hi(), right->as_register_hi(), dest->as_register_hi()); |
| __ and3 (left->as_register_lo(), right->as_register_lo(), dest->as_register_lo()); |
| break; |
| |
| case lir_logic_or: |
| __ or3 (left->as_register_hi(), right->as_register_hi(), dest->as_register_hi()); |
| __ or3 (left->as_register_lo(), right->as_register_lo(), dest->as_register_lo()); |
| break; |
| |
| case lir_logic_xor: |
| __ xor3 (left->as_register_hi(), right->as_register_hi(), dest->as_register_hi()); |
| __ xor3 (left->as_register_lo(), right->as_register_lo(), dest->as_register_lo()); |
| break; |
| |
| default: ShouldNotReachHere(); |
| } |
| #endif |
| } |
| } |
| } |
| |
| |
| int LIR_Assembler::shift_amount(BasicType t) { |
| int elem_size = type2aelembytes(t); |
| switch (elem_size) { |
| case 1 : return 0; |
| case 2 : return 1; |
| case 4 : return 2; |
| case 8 : return 3; |
| } |
| ShouldNotReachHere(); |
| return -1; |
| } |
| |
| |
| void LIR_Assembler::throw_op(LIR_Opr exceptionPC, LIR_Opr exceptionOop, CodeEmitInfo* info, bool unwind) { |
| assert(exceptionOop->as_register() == Oexception, "should match"); |
| assert(unwind || exceptionPC->as_register() == Oissuing_pc, "should match"); |
| |
| info->add_register_oop(exceptionOop); |
| |
| if (unwind) { |
| __ call(Runtime1::entry_for(Runtime1::unwind_exception_id), relocInfo::runtime_call_type); |
| __ delayed()->nop(); |
| } else { |
| // reuse the debug info from the safepoint poll for the throw op itself |
| address pc_for_athrow = __ pc(); |
| int pc_for_athrow_offset = __ offset(); |
| RelocationHolder rspec = internal_word_Relocation::spec(pc_for_athrow); |
| __ set(pc_for_athrow, Oissuing_pc, rspec); |
| add_call_info(pc_for_athrow_offset, info); // for exception handler |
| |
| __ call(Runtime1::entry_for(Runtime1::handle_exception_id), relocInfo::runtime_call_type); |
| __ delayed()->nop(); |
| } |
| } |
| |
| |
| void LIR_Assembler::emit_arraycopy(LIR_OpArrayCopy* op) { |
| Register src = op->src()->as_register(); |
| Register dst = op->dst()->as_register(); |
| Register src_pos = op->src_pos()->as_register(); |
| Register dst_pos = op->dst_pos()->as_register(); |
| Register length = op->length()->as_register(); |
| Register tmp = op->tmp()->as_register(); |
| Register tmp2 = O7; |
| |
| int flags = op->flags(); |
| ciArrayKlass* default_type = op->expected_type(); |
| BasicType basic_type = default_type != NULL ? default_type->element_type()->basic_type() : T_ILLEGAL; |
| if (basic_type == T_ARRAY) basic_type = T_OBJECT; |
| |
| // set up the arraycopy stub information |
| ArrayCopyStub* stub = op->stub(); |
| |
| // always do stub if no type information is available. it's ok if |
| // the known type isn't loaded since the code sanity checks |
| // in debug mode and the type isn't required when we know the exact type |
| // also check that the type is an array type. |
| // We also, for now, always call the stub if the barrier set requires a |
| // write_ref_pre barrier (which the stub does, but none of the optimized |
| // cases currently does). |
| if (op->expected_type() == NULL || |
| Universe::heap()->barrier_set()->has_write_ref_pre_barrier()) { |
| __ mov(src, O0); |
| __ mov(src_pos, O1); |
| __ mov(dst, O2); |
| __ mov(dst_pos, O3); |
| __ mov(length, O4); |
| __ call_VM_leaf(tmp, CAST_FROM_FN_PTR(address, Runtime1::arraycopy)); |
| |
| __ br_zero(Assembler::less, false, Assembler::pn, O0, *stub->entry()); |
| __ delayed()->nop(); |
| __ bind(*stub->continuation()); |
| return; |
| } |
| |
| assert(default_type != NULL && default_type->is_array_klass(), "must be true at this point"); |
| |
| // make sure src and dst are non-null and load array length |
| if (flags & LIR_OpArrayCopy::src_null_check) { |
| __ tst(src); |
| __ br(Assembler::equal, false, Assembler::pn, *stub->entry()); |
| __ delayed()->nop(); |
| } |
| |
| if (flags & LIR_OpArrayCopy::dst_null_check) { |
| __ tst(dst); |
| __ br(Assembler::equal, false, Assembler::pn, *stub->entry()); |
| __ delayed()->nop(); |
| } |
| |
| if (flags & LIR_OpArrayCopy::src_pos_positive_check) { |
| // test src_pos register |
| __ tst(src_pos); |
| __ br(Assembler::less, false, Assembler::pn, *stub->entry()); |
| __ delayed()->nop(); |
| } |
| |
| if (flags & LIR_OpArrayCopy::dst_pos_positive_check) { |
| // test dst_pos register |
| __ tst(dst_pos); |
| __ br(Assembler::less, false, Assembler::pn, *stub->entry()); |
| __ delayed()->nop(); |
| } |
| |
| if (flags & LIR_OpArrayCopy::length_positive_check) { |
| // make sure length isn't negative |
| __ tst(length); |
| __ br(Assembler::less, false, Assembler::pn, *stub->entry()); |
| __ delayed()->nop(); |
| } |
| |
| if (flags & LIR_OpArrayCopy::src_range_check) { |
| __ ld(src, arrayOopDesc::length_offset_in_bytes(), tmp2); |
| __ add(length, src_pos, tmp); |
| __ cmp(tmp2, tmp); |
| __ br(Assembler::carrySet, false, Assembler::pn, *stub->entry()); |
| __ delayed()->nop(); |
| } |
| |
| if (flags & LIR_OpArrayCopy::dst_range_check) { |
| __ ld(dst, arrayOopDesc::length_offset_in_bytes(), tmp2); |
| __ add(length, dst_pos, tmp); |
| __ cmp(tmp2, tmp); |
| __ br(Assembler::carrySet, false, Assembler::pn, *stub->entry()); |
| __ delayed()->nop(); |
| } |
| |
| if (flags & LIR_OpArrayCopy::type_check) { |
| __ ld_ptr(src, oopDesc::klass_offset_in_bytes(), tmp); |
| __ ld_ptr(dst, oopDesc::klass_offset_in_bytes(), tmp2); |
| __ cmp(tmp, tmp2); |
| __ br(Assembler::notEqual, false, Assembler::pt, *stub->entry()); |
| __ delayed()->nop(); |
| } |
| |
| #ifdef ASSERT |
| if (basic_type != T_OBJECT || !(flags & LIR_OpArrayCopy::type_check)) { |
| // Sanity check the known type with the incoming class. For the |
| // primitive case the types must match exactly with src.klass and |
| // dst.klass each exactly matching the default type. For the |
| // object array case, if no type check is needed then either the |
| // dst type is exactly the expected type and the src type is a |
| // subtype which we can't check or src is the same array as dst |
| // but not necessarily exactly of type default_type. |
| Label known_ok, halt; |
| jobject2reg(op->expected_type()->encoding(), tmp); |
| __ ld_ptr(dst, oopDesc::klass_offset_in_bytes(), tmp2); |
| if (basic_type != T_OBJECT) { |
| __ cmp(tmp, tmp2); |
| __ br(Assembler::notEqual, false, Assembler::pn, halt); |
| __ delayed()->ld_ptr(src, oopDesc::klass_offset_in_bytes(), tmp2); |
| __ cmp(tmp, tmp2); |
| __ br(Assembler::equal, false, Assembler::pn, known_ok); |
| __ delayed()->nop(); |
| } else { |
| __ cmp(tmp, tmp2); |
| __ br(Assembler::equal, false, Assembler::pn, known_ok); |
| __ delayed()->cmp(src, dst); |
| __ br(Assembler::equal, false, Assembler::pn, known_ok); |
| __ delayed()->nop(); |
| } |
| __ bind(halt); |
| __ stop("incorrect type information in arraycopy"); |
| __ bind(known_ok); |
| } |
| #endif |
| |
| int shift = shift_amount(basic_type); |
| |
| Register src_ptr = O0; |
| Register dst_ptr = O1; |
| Register len = O2; |
| |
| __ add(src, arrayOopDesc::base_offset_in_bytes(basic_type), src_ptr); |
| if (shift == 0) { |
| __ add(src_ptr, src_pos, src_ptr); |
| } else { |
| __ sll(src_pos, shift, tmp); |
| __ add(src_ptr, tmp, src_ptr); |
| } |
| |
| __ add(dst, arrayOopDesc::base_offset_in_bytes(basic_type), dst_ptr); |
| if (shift == 0) { |
| __ add(dst_ptr, dst_pos, dst_ptr); |
| } else { |
| __ sll(dst_pos, shift, tmp); |
| __ add(dst_ptr, tmp, dst_ptr); |
| } |
| |
| if (basic_type != T_OBJECT) { |
| if (shift == 0) { |
| __ mov(length, len); |
| } else { |
| __ sll(length, shift, len); |
| } |
| __ call_VM_leaf(tmp, CAST_FROM_FN_PTR(address, Runtime1::primitive_arraycopy)); |
| } else { |
| // oop_arraycopy takes a length in number of elements, so don't scale it. |
| __ mov(length, len); |
| __ call_VM_leaf(tmp, CAST_FROM_FN_PTR(address, Runtime1::oop_arraycopy)); |
| } |
| |
| __ bind(*stub->continuation()); |
| } |
| |
| |
| void LIR_Assembler::shift_op(LIR_Code code, LIR_Opr left, LIR_Opr count, LIR_Opr dest, LIR_Opr tmp) { |
| if (dest->is_single_cpu()) { |
| #ifdef _LP64 |
| if (left->type() == T_OBJECT) { |
| switch (code) { |
| case lir_shl: __ sllx (left->as_register(), count->as_register(), dest->as_register()); break; |
| case lir_shr: __ srax (left->as_register(), count->as_register(), dest->as_register()); break; |
| case lir_ushr: __ srl (left->as_register(), count->as_register(), dest->as_register()); break; |
| default: ShouldNotReachHere(); |
| } |
| } else |
| #endif |
| switch (code) { |
| case lir_shl: __ sll (left->as_register(), count->as_register(), dest->as_register()); break; |
| case lir_shr: __ sra (left->as_register(), count->as_register(), dest->as_register()); break; |
| case lir_ushr: __ srl (left->as_register(), count->as_register(), dest->as_register()); break; |
| default: ShouldNotReachHere(); |
| } |
| } else { |
| #ifdef _LP64 |
| switch (code) { |
| case lir_shl: __ sllx (left->as_register_lo(), count->as_register(), dest->as_register_lo()); break; |
| case lir_shr: __ srax (left->as_register_lo(), count->as_register(), dest->as_register_lo()); break; |
| case lir_ushr: __ srlx (left->as_register_lo(), count->as_register(), dest->as_register_lo()); break; |
| default: ShouldNotReachHere(); |
| } |
| #else |
| switch (code) { |
| case lir_shl: __ lshl (left->as_register_hi(), left->as_register_lo(), count->as_register(), dest->as_register_hi(), dest->as_register_lo(), G3_scratch); break; |
| case lir_shr: __ lshr (left->as_register_hi(), left->as_register_lo(), count->as_register(), dest->as_register_hi(), dest->as_register_lo(), G3_scratch); break; |
| case lir_ushr: __ lushr (left->as_register_hi(), left->as_register_lo(), count->as_register(), dest->as_register_hi(), dest->as_register_lo(), G3_scratch); break; |
| default: ShouldNotReachHere(); |
| } |
| #endif |
| } |
| } |
| |
| |
| void LIR_Assembler::shift_op(LIR_Code code, LIR_Opr left, jint count, LIR_Opr dest) { |
| #ifdef _LP64 |
| if (left->type() == T_OBJECT) { |
| count = count & 63; // shouldn't shift by more than sizeof(intptr_t) |
| Register l = left->as_register(); |
| Register d = dest->as_register_lo(); |
| switch (code) { |
| case lir_shl: __ sllx (l, count, d); break; |
| case lir_shr: __ srax (l, count, d); break; |
| case lir_ushr: __ srlx (l, count, d); break; |
| default: ShouldNotReachHere(); |
| } |
| return; |
| } |
| #endif |
| |
| if (dest->is_single_cpu()) { |
| count = count & 0x1F; // Java spec |
| switch (code) { |
| case lir_shl: __ sll (left->as_register(), count, dest->as_register()); break; |
| case lir_shr: __ sra (left->as_register(), count, dest->as_register()); break; |
| case lir_ushr: __ srl (left->as_register(), count, dest->as_register()); break; |
| default: ShouldNotReachHere(); |
| } |
| } else if (dest->is_double_cpu()) { |
| count = count & 63; // Java spec |
| switch (code) { |
| case lir_shl: __ sllx (left->as_pointer_register(), count, dest->as_pointer_register()); break; |
| case lir_shr: __ srax (left->as_pointer_register(), count, dest->as_pointer_register()); break; |
| case lir_ushr: __ srlx (left->as_pointer_register(), count, dest->as_pointer_register()); break; |
| default: ShouldNotReachHere(); |
| } |
| } else { |
| ShouldNotReachHere(); |
| } |
| } |
| |
| |
| void LIR_Assembler::emit_alloc_obj(LIR_OpAllocObj* op) { |
| assert(op->tmp1()->as_register() == G1 && |
| op->tmp2()->as_register() == G3 && |
| op->tmp3()->as_register() == G4 && |
| op->obj()->as_register() == O0 && |
| op->klass()->as_register() == G5, "must be"); |
| if (op->init_check()) { |
| __ ld(op->klass()->as_register(), |
| instanceKlass::init_state_offset_in_bytes() + sizeof(oopDesc), |
| op->tmp1()->as_register()); |
| add_debug_info_for_null_check_here(op->stub()->info()); |
| __ cmp(op->tmp1()->as_register(), instanceKlass::fully_initialized); |
| __ br(Assembler::notEqual, false, Assembler::pn, *op->stub()->entry()); |
| __ delayed()->nop(); |
| } |
| __ allocate_object(op->obj()->as_register(), |
| op->tmp1()->as_register(), |
| op->tmp2()->as_register(), |
| op->tmp3()->as_register(), |
| op->header_size(), |
| op->object_size(), |
| op->klass()->as_register(), |
| *op->stub()->entry()); |
| __ bind(*op->stub()->continuation()); |
| __ verify_oop(op->obj()->as_register()); |
| } |
| |
| |
| void LIR_Assembler::emit_alloc_array(LIR_OpAllocArray* op) { |
| assert(op->tmp1()->as_register() == G1 && |
| op->tmp2()->as_register() == G3 && |
| op->tmp3()->as_register() == G4 && |
| op->tmp4()->as_register() == O1 && |
| op->klass()->as_register() == G5, "must be"); |
| if (UseSlowPath || |
| (!UseFastNewObjectArray && (op->type() == T_OBJECT || op->type() == T_ARRAY)) || |
| (!UseFastNewTypeArray && (op->type() != T_OBJECT && op->type() != T_ARRAY))) { |
| __ br(Assembler::always, false, Assembler::pn, *op->stub()->entry()); |
| __ delayed()->nop(); |
| } else { |
| __ allocate_array(op->obj()->as_register(), |
| op->len()->as_register(), |
| op->tmp1()->as_register(), |
| op->tmp2()->as_register(), |
| op->tmp3()->as_register(), |
| arrayOopDesc::header_size(op->type()), |
| type2aelembytes(op->type()), |
| op->klass()->as_register(), |
| *op->stub()->entry()); |
| } |
| __ bind(*op->stub()->continuation()); |
| } |
| |
| |
| void LIR_Assembler::emit_opTypeCheck(LIR_OpTypeCheck* op) { |
| LIR_Code code = op->code(); |
| if (code == lir_store_check) { |
| Register value = op->object()->as_register(); |
| Register array = op->array()->as_register(); |
| Register k_RInfo = op->tmp1()->as_register(); |
| Register klass_RInfo = op->tmp2()->as_register(); |
| Register Rtmp1 = op->tmp3()->as_register(); |
| |
| __ verify_oop(value); |
| |
| CodeStub* stub = op->stub(); |
| Label done; |
| __ cmp(value, 0); |
| __ br(Assembler::equal, false, Assembler::pn, done); |
| __ delayed()->nop(); |
| load(array, oopDesc::klass_offset_in_bytes(), k_RInfo, T_OBJECT, op->info_for_exception()); |
| load(value, oopDesc::klass_offset_in_bytes(), klass_RInfo, T_OBJECT, NULL); |
| |
| // get instance klass |
| load(k_RInfo, objArrayKlass::element_klass_offset_in_bytes() + sizeof(oopDesc), k_RInfo, T_OBJECT, NULL); |
| // perform the fast part of the checking logic |
| __ check_klass_subtype_fast_path(klass_RInfo, k_RInfo, Rtmp1, O7, &done, stub->entry(), NULL); |
| |
| // call out-of-line instance of __ check_klass_subtype_slow_path(...): |
| assert(klass_RInfo == G3 && k_RInfo == G1, "incorrect call setup"); |
| __ call(Runtime1::entry_for(Runtime1::slow_subtype_check_id), relocInfo::runtime_call_type); |
| __ delayed()->nop(); |
| __ cmp(G3, 0); |
| __ br(Assembler::equal, false, Assembler::pn, *stub->entry()); |
| __ delayed()->nop(); |
| __ bind(done); |
| } else if (op->code() == lir_checkcast) { |
| // we always need a stub for the failure case. |
| CodeStub* stub = op->stub(); |
| Register obj = op->object()->as_register(); |
| Register k_RInfo = op->tmp1()->as_register(); |
| Register klass_RInfo = op->tmp2()->as_register(); |
| Register dst = op->result_opr()->as_register(); |
| Register Rtmp1 = op->tmp3()->as_register(); |
| ciKlass* k = op->klass(); |
| |
| if (obj == k_RInfo) { |
| k_RInfo = klass_RInfo; |
| klass_RInfo = obj; |
| } |
| if (op->profiled_method() != NULL) { |
| ciMethod* method = op->profiled_method(); |
| int bci = op->profiled_bci(); |
| |
| // We need two temporaries to perform this operation on SPARC, |
| // so to keep things simple we perform a redundant test here |
| Label profile_done; |
| __ cmp(obj, 0); |
| __ br(Assembler::notEqual, false, Assembler::pn, profile_done); |
| __ delayed()->nop(); |
| // Object is null; update methodDataOop |
| ciMethodData* md = method->method_data(); |
| if (md == NULL) { |
| bailout("out of memory building methodDataOop"); |
| return; |
| } |
| ciProfileData* data = md->bci_to_data(bci); |
| assert(data != NULL, "need data for checkcast"); |
| assert(data->is_BitData(), "need BitData for checkcast"); |
| Register mdo = k_RInfo; |
| Register data_val = Rtmp1; |
| jobject2reg(md->encoding(), mdo); |
| |
| int mdo_offset_bias = 0; |
| if (!Assembler::is_simm13(md->byte_offset_of_slot(data, DataLayout::header_offset()) + data->size_in_bytes())) { |
| // The offset is large so bias the mdo by the base of the slot so |
| // that the ld can use simm13s to reference the slots of the data |
| mdo_offset_bias = md->byte_offset_of_slot(data, DataLayout::header_offset()); |
| __ set(mdo_offset_bias, data_val); |
| __ add(mdo, data_val, mdo); |
| } |
| |
| |
| Address flags_addr(mdo, md->byte_offset_of_slot(data, DataLayout::flags_offset()) - mdo_offset_bias); |
| __ ldub(flags_addr, data_val); |
| __ or3(data_val, BitData::null_seen_byte_constant(), data_val); |
| __ stb(data_val, flags_addr); |
| __ bind(profile_done); |
| } |
| |
| Label done; |
| // patching may screw with our temporaries on sparc, |
| // so let's do it before loading the class |
| if (k->is_loaded()) { |
| jobject2reg(k->encoding(), k_RInfo); |
| } else { |
| jobject2reg_with_patching(k_RInfo, op->info_for_patch()); |
| } |
| assert(obj != k_RInfo, "must be different"); |
| __ cmp(obj, 0); |
| __ br(Assembler::equal, false, Assembler::pn, done); |
| __ delayed()->nop(); |
| |
| // get object class |
| // not a safepoint as obj null check happens earlier |
| load(obj, oopDesc::klass_offset_in_bytes(), klass_RInfo, T_OBJECT, NULL); |
| if (op->fast_check()) { |
| assert_different_registers(klass_RInfo, k_RInfo); |
| __ cmp(k_RInfo, klass_RInfo); |
| __ br(Assembler::notEqual, false, Assembler::pt, *stub->entry()); |
| __ delayed()->nop(); |
| __ bind(done); |
| } else { |
| bool need_slow_path = true; |
| if (k->is_loaded()) { |
| if (k->super_check_offset() != sizeof(oopDesc) + Klass::secondary_super_cache_offset_in_bytes()) |
| need_slow_path = false; |
| // perform the fast part of the checking logic |
| __ check_klass_subtype_fast_path(klass_RInfo, k_RInfo, Rtmp1, noreg, |
| (need_slow_path ? &done : NULL), |
| stub->entry(), NULL, |
| RegisterOrConstant(k->super_check_offset())); |
| } else { |
| // perform the fast part of the checking logic |
| __ check_klass_subtype_fast_path(klass_RInfo, k_RInfo, Rtmp1, O7, |
| &done, stub->entry(), NULL); |
| } |
| if (need_slow_path) { |
| // call out-of-line instance of __ check_klass_subtype_slow_path(...): |
| assert(klass_RInfo == G3 && k_RInfo == G1, "incorrect call setup"); |
| __ call(Runtime1::entry_for(Runtime1::slow_subtype_check_id), relocInfo::runtime_call_type); |
| __ delayed()->nop(); |
| __ cmp(G3, 0); |
| __ br(Assembler::equal, false, Assembler::pn, *stub->entry()); |
| __ delayed()->nop(); |
| } |
| __ bind(done); |
| } |
| __ mov(obj, dst); |
| } else if (code == lir_instanceof) { |
| Register obj = op->object()->as_register(); |
| Register k_RInfo = op->tmp1()->as_register(); |
| Register klass_RInfo = op->tmp2()->as_register(); |
| Register dst = op->result_opr()->as_register(); |
| Register Rtmp1 = op->tmp3()->as_register(); |
| ciKlass* k = op->klass(); |
| |
| Label done; |
| if (obj == k_RInfo) { |
| k_RInfo = klass_RInfo; |
| klass_RInfo = obj; |
| } |
| // patching may screw with our temporaries on sparc, |
| // so let's do it before loading the class |
| if (k->is_loaded()) { |
| jobject2reg(k->encoding(), k_RInfo); |
| } else { |
| jobject2reg_with_patching(k_RInfo, op->info_for_patch()); |
| } |
| assert(obj != k_RInfo, "must be different"); |
| __ cmp(obj, 0); |
| __ br(Assembler::equal, true, Assembler::pn, done); |
| __ delayed()->set(0, dst); |
| |
| // get object class |
| // not a safepoint as obj null check happens earlier |
| load(obj, oopDesc::klass_offset_in_bytes(), klass_RInfo, T_OBJECT, NULL); |
| if (op->fast_check()) { |
| __ cmp(k_RInfo, klass_RInfo); |
| __ br(Assembler::equal, true, Assembler::pt, done); |
| __ delayed()->set(1, dst); |
| __ set(0, dst); |
| __ bind(done); |
| } else { |
| bool need_slow_path = true; |
| if (k->is_loaded()) { |
| if (k->super_check_offset() != sizeof(oopDesc) + Klass::secondary_super_cache_offset_in_bytes()) |
| need_slow_path = false; |
| // perform the fast part of the checking logic |
| __ check_klass_subtype_fast_path(klass_RInfo, k_RInfo, O7, noreg, |
| (need_slow_path ? &done : NULL), |
| (need_slow_path ? &done : NULL), NULL, |
| RegisterOrConstant(k->super_check_offset()), |
| dst); |
| } else { |
| assert(dst != klass_RInfo && dst != k_RInfo, "need 3 registers"); |
| // perform the fast part of the checking logic |
| __ check_klass_subtype_fast_path(klass_RInfo, k_RInfo, O7, dst, |
| &done, &done, NULL, |
| RegisterOrConstant(-1), |
| dst); |
| } |
| if (need_slow_path) { |
| // call out-of-line instance of __ check_klass_subtype_slow_path(...): |
| assert(klass_RInfo == G3 && k_RInfo == G1, "incorrect call setup"); |
| __ call(Runtime1::entry_for(Runtime1::slow_subtype_check_id), relocInfo::runtime_call_type); |
| __ delayed()->nop(); |
| __ mov(G3, dst); |
| } |
| __ bind(done); |
| } |
| } else { |
| ShouldNotReachHere(); |
| } |
| |
| } |
| |
| |
| void LIR_Assembler::emit_compare_and_swap(LIR_OpCompareAndSwap* op) { |
| if (op->code() == lir_cas_long) { |
| assert(VM_Version::supports_cx8(), "wrong machine"); |
| Register addr = op->addr()->as_pointer_register(); |
| Register cmp_value_lo = op->cmp_value()->as_register_lo(); |
| Register cmp_value_hi = op->cmp_value()->as_register_hi(); |
| Register new_value_lo = op->new_value()->as_register_lo(); |
| Register new_value_hi = op->new_value()->as_register_hi(); |
| Register t1 = op->tmp1()->as_register(); |
| Register t2 = op->tmp2()->as_register(); |
| #ifdef _LP64 |
| __ mov(cmp_value_lo, t1); |
| __ mov(new_value_lo, t2); |
| #else |
| // move high and low halves of long values into single registers |
| __ sllx(cmp_value_hi, 32, t1); // shift high half into temp reg |
| __ srl(cmp_value_lo, 0, cmp_value_lo); // clear upper 32 bits of low half |
| __ or3(t1, cmp_value_lo, t1); // t1 holds 64-bit compare value |
| __ sllx(new_value_hi, 32, t2); |
| __ srl(new_value_lo, 0, new_value_lo); |
| __ or3(t2, new_value_lo, t2); // t2 holds 64-bit value to swap |
| #endif |
| // perform the compare and swap operation |
| __ casx(addr, t1, t2); |
| // generate condition code - if the swap succeeded, t2 ("new value" reg) was |
| // overwritten with the original value in "addr" and will be equal to t1. |
| __ cmp(t1, t2); |
| |
| } else if (op->code() == lir_cas_int || op->code() == lir_cas_obj) { |
| Register addr = op->addr()->as_pointer_register(); |
| Register cmp_value = op->cmp_value()->as_register(); |
| Register new_value = op->new_value()->as_register(); |
| Register t1 = op->tmp1()->as_register(); |
| Register t2 = op->tmp2()->as_register(); |
| __ mov(cmp_value, t1); |
| __ mov(new_value, t2); |
| #ifdef _LP64 |
| if (op->code() == lir_cas_obj) { |
| __ casx(addr, t1, t2); |
| } else |
| #endif |
| { |
| __ cas(addr, t1, t2); |
| } |
| __ cmp(t1, t2); |
| } else { |
| Unimplemented(); |
| } |
| } |
| |
| void LIR_Assembler::set_24bit_FPU() { |
| Unimplemented(); |
| } |
| |
| |
| void LIR_Assembler::reset_FPU() { |
| Unimplemented(); |
| } |
| |
| |
| void LIR_Assembler::breakpoint() { |
| __ breakpoint_trap(); |
| } |
| |
| |
| void LIR_Assembler::push(LIR_Opr opr) { |
| Unimplemented(); |
| } |
| |
| |
| void LIR_Assembler::pop(LIR_Opr opr) { |
| Unimplemented(); |
| } |
| |
| |
| void LIR_Assembler::monitor_address(int monitor_no, LIR_Opr dst_opr) { |
| Address mon_addr = frame_map()->address_for_monitor_lock(monitor_no); |
| Register dst = dst_opr->as_register(); |
| Register reg = mon_addr.base(); |
| int offset = mon_addr.disp(); |
| // compute pointer to BasicLock |
| if (mon_addr.is_simm13()) { |
| __ add(reg, offset, dst); |
| } else { |
| __ set(offset, dst); |
| __ add(dst, reg, dst); |
| } |
| } |
| |
| |
| void LIR_Assembler::emit_lock(LIR_OpLock* op) { |
| Register obj = op->obj_opr()->as_register(); |
| Register hdr = op->hdr_opr()->as_register(); |
| Register lock = op->lock_opr()->as_register(); |
| |
| // obj may not be an oop |
| if (op->code() == lir_lock) { |
| MonitorEnterStub* stub = (MonitorEnterStub*)op->stub(); |
| if (UseFastLocking) { |
| assert(BasicLock::displaced_header_offset_in_bytes() == 0, "lock_reg must point to the displaced header"); |
| // add debug info for NullPointerException only if one is possible |
| if (op->info() != NULL) { |
| add_debug_info_for_null_check_here(op->info()); |
| } |
| __ lock_object(hdr, obj, lock, op->scratch_opr()->as_register(), *op->stub()->entry()); |
| } else { |
| // always do slow locking |
| // note: the slow locking code could be inlined here, however if we use |
| // slow locking, speed doesn't matter anyway and this solution is |
| // simpler and requires less duplicated code - additionally, the |
| // slow locking code is the same in either case which simplifies |
| // debugging |
| __ br(Assembler::always, false, Assembler::pt, *op->stub()->entry()); |
| __ delayed()->nop(); |
| } |
| } else { |
| assert (op->code() == lir_unlock, "Invalid code, expected lir_unlock"); |
| if (UseFastLocking) { |
| assert(BasicLock::displaced_header_offset_in_bytes() == 0, "lock_reg must point to the displaced header"); |
| __ unlock_object(hdr, obj, lock, *op->stub()->entry()); |
| } else { |
| // always do slow unlocking |
| // note: the slow unlocking code could be inlined here, however if we use |
| // slow unlocking, speed doesn't matter anyway and this solution is |
| // simpler and requires less duplicated code - additionally, the |
| // slow unlocking code is the same in either case which simplifies |
| // debugging |
| __ br(Assembler::always, false, Assembler::pt, *op->stub()->entry()); |
| __ delayed()->nop(); |
| } |
| } |
| __ bind(*op->stub()->continuation()); |
| } |
| |
| |
| void LIR_Assembler::emit_profile_call(LIR_OpProfileCall* op) { |
| ciMethod* method = op->profiled_method(); |
| int bci = op->profiled_bci(); |
| |
| // Update counter for all call types |
| ciMethodData* md = method->method_data(); |
| if (md == NULL) { |
| bailout("out of memory building methodDataOop"); |
| return; |
| } |
| ciProfileData* data = md->bci_to_data(bci); |
| assert(data->is_CounterData(), "need CounterData for calls"); |
| assert(op->mdo()->is_single_cpu(), "mdo must be allocated"); |
| assert(op->tmp1()->is_single_cpu(), "tmp1 must be allocated"); |
| Register mdo = op->mdo()->as_register(); |
| Register tmp1 = op->tmp1()->as_register(); |
| jobject2reg(md->encoding(), mdo); |
| int mdo_offset_bias = 0; |
| if (!Assembler::is_simm13(md->byte_offset_of_slot(data, CounterData::count_offset()) + |
| data->size_in_bytes())) { |
| // The offset is large so bias the mdo by the base of the slot so |
| // that the ld can use simm13s to reference the slots of the data |
| mdo_offset_bias = md->byte_offset_of_slot(data, CounterData::count_offset()); |
| __ set(mdo_offset_bias, O7); |
| __ add(mdo, O7, mdo); |
| } |
| |
| Address counter_addr(mdo, md->byte_offset_of_slot(data, CounterData::count_offset()) - mdo_offset_bias); |
| __ lduw(counter_addr, tmp1); |
| __ add(tmp1, DataLayout::counter_increment, tmp1); |
| __ stw(tmp1, counter_addr); |
| Bytecodes::Code bc = method->java_code_at_bci(bci); |
| // Perform additional virtual call profiling for invokevirtual and |
| // invokeinterface bytecodes |
| if ((bc == Bytecodes::_invokevirtual || bc == Bytecodes::_invokeinterface) && |
| Tier1ProfileVirtualCalls) { |
| assert(op->recv()->is_single_cpu(), "recv must be allocated"); |
| Register recv = op->recv()->as_register(); |
| assert_different_registers(mdo, tmp1, recv); |
| assert(data->is_VirtualCallData(), "need VirtualCallData for virtual calls"); |
| ciKlass* known_klass = op->known_holder(); |
| if (Tier1OptimizeVirtualCallProfiling && known_klass != NULL) { |
| // We know the type that will be seen at this call site; we can |
| // statically update the methodDataOop rather than needing to do |
| // dynamic tests on the receiver type |
| |
| // NOTE: we should probably put a lock around this search to |
| // avoid collisions by concurrent compilations |
| ciVirtualCallData* vc_data = (ciVirtualCallData*) data; |
| uint i; |
| for (i = 0; i < VirtualCallData::row_limit(); i++) { |
| ciKlass* receiver = vc_data->receiver(i); |
| if (known_klass->equals(receiver)) { |
| Address data_addr(mdo, md->byte_offset_of_slot(data, |
| VirtualCallData::receiver_count_offset(i)) - |
| mdo_offset_bias); |
| __ lduw(data_addr, tmp1); |
| __ add(tmp1, DataLayout::counter_increment, tmp1); |
| __ stw(tmp1, data_addr); |
| return; |
| } |
| } |
| |
| // Receiver type not found in profile data; select an empty slot |
| |
| // Note that this is less efficient than it should be because it |
| // always does a write to the receiver part of the |
| // VirtualCallData rather than just the first time |
| for (i = 0; i < VirtualCallData::row_limit(); i++) { |
| ciKlass* receiver = vc_data->receiver(i); |
| if (receiver == NULL) { |
| Address recv_addr(mdo, md->byte_offset_of_slot(data, VirtualCallData::receiver_offset(i)) - |
| mdo_offset_bias); |
| jobject2reg(known_klass->encoding(), tmp1); |
| __ st_ptr(tmp1, recv_addr); |
| Address data_addr(mdo, md->byte_offset_of_slot(data, VirtualCallData::receiver_count_offset(i)) - |
| mdo_offset_bias); |
| __ lduw(data_addr, tmp1); |
| __ add(tmp1, DataLayout::counter_increment, tmp1); |
| __ stw(tmp1, data_addr); |
| return; |
| } |
| } |
| } else { |
| load(Address(recv, oopDesc::klass_offset_in_bytes()), recv, T_OBJECT); |
| Label update_done; |
| uint i; |
| for (i = 0; i < VirtualCallData::row_limit(); i++) { |
| Label next_test; |
| // See if the receiver is receiver[n]. |
| Address receiver_addr(mdo, md->byte_offset_of_slot(data, VirtualCallData::receiver_offset(i)) - |
| mdo_offset_bias); |
| __ ld_ptr(receiver_addr, tmp1); |
| __ verify_oop(tmp1); |
| __ cmp(recv, tmp1); |
| __ brx(Assembler::notEqual, false, Assembler::pt, next_test); |
| __ delayed()->nop(); |
| Address data_addr(mdo, md->byte_offset_of_slot(data, VirtualCallData::receiver_count_offset(i)) - |
| mdo_offset_bias); |
| __ lduw(data_addr, tmp1); |
| __ add(tmp1, DataLayout::counter_increment, tmp1); |
| __ stw(tmp1, data_addr); |
| __ br(Assembler::always, false, Assembler::pt, update_done); |
| __ delayed()->nop(); |
| __ bind(next_test); |
| } |
| |
| // Didn't find receiver; find next empty slot and fill it in |
| for (i = 0; i < VirtualCallData::row_limit(); i++) { |
| Label next_test; |
| Address recv_addr(mdo, md->byte_offset_of_slot(data, VirtualCallData::receiver_offset(i)) - |
| mdo_offset_bias); |
| load(recv_addr, tmp1, T_OBJECT); |
| __ tst(tmp1); |
| __ brx(Assembler::notEqual, false, Assembler::pt, next_test); |
| __ delayed()->nop(); |
| __ st_ptr(recv, recv_addr); |
| __ set(DataLayout::counter_increment, tmp1); |
| __ st_ptr(tmp1, mdo, md->byte_offset_of_slot(data, VirtualCallData::receiver_count_offset(i)) - |
| mdo_offset_bias); |
| if (i < (VirtualCallData::row_limit() - 1)) { |
| __ br(Assembler::always, false, Assembler::pt, update_done); |
| __ delayed()->nop(); |
| } |
| __ bind(next_test); |
| } |
| |
| __ bind(update_done); |
| } |
| } |
| } |
| |
| |
| void LIR_Assembler::align_backward_branch_target() { |
| __ align(16); |
| } |
| |
| |
| void LIR_Assembler::emit_delay(LIR_OpDelay* op) { |
| // make sure we are expecting a delay |
| // this has the side effect of clearing the delay state |
| // so we can use _masm instead of _masm->delayed() to do the |
| // code generation. |
| __ delayed(); |
| |
| // make sure we only emit one instruction |
| int offset = code_offset(); |
| op->delay_op()->emit_code(this); |
| #ifdef ASSERT |
| if (code_offset() - offset != NativeInstruction::nop_instruction_size) { |
| op->delay_op()->print(); |
| } |
| assert(code_offset() - offset == NativeInstruction::nop_instruction_size, |
| "only one instruction can go in a delay slot"); |
| #endif |
| |
| // we may also be emitting the call info for the instruction |
| // which we are the delay slot of. |
| CodeEmitInfo * call_info = op->call_info(); |
| if (call_info) { |
| add_call_info(code_offset(), call_info); |
| } |
| |
| if (VerifyStackAtCalls) { |
| _masm->sub(FP, SP, O7); |
| _masm->cmp(O7, initial_frame_size_in_bytes()); |
| _masm->trap(Assembler::notEqual, Assembler::ptr_cc, G0, ST_RESERVED_FOR_USER_0+2 ); |
| } |
| } |
| |
| |
| void LIR_Assembler::negate(LIR_Opr left, LIR_Opr dest) { |
| assert(left->is_register(), "can only handle registers"); |
| |
| if (left->is_single_cpu()) { |
| __ neg(left->as_register(), dest->as_register()); |
| } else if (left->is_single_fpu()) { |
| __ fneg(FloatRegisterImpl::S, left->as_float_reg(), dest->as_float_reg()); |
| } else if (left->is_double_fpu()) { |
| __ fneg(FloatRegisterImpl::D, left->as_double_reg(), dest->as_double_reg()); |
| } else { |
| assert (left->is_double_cpu(), "Must be a long"); |
| Register Rlow = left->as_register_lo(); |
| Register Rhi = left->as_register_hi(); |
| #ifdef _LP64 |
| __ sub(G0, Rlow, dest->as_register_lo()); |
| #else |
| __ subcc(G0, Rlow, dest->as_register_lo()); |
| __ subc (G0, Rhi, dest->as_register_hi()); |
| #endif |
| } |
| } |
| |
| |
| void LIR_Assembler::fxch(int i) { |
| Unimplemented(); |
| } |
| |
| void LIR_Assembler::fld(int i) { |
| Unimplemented(); |
| } |
| |
| void LIR_Assembler::ffree(int i) { |
| Unimplemented(); |
| } |
| |
| void LIR_Assembler::rt_call(LIR_Opr result, address dest, |
| const LIR_OprList* args, LIR_Opr tmp, CodeEmitInfo* info) { |
| |
| // if tmp is invalid, then the function being called doesn't destroy the thread |
| if (tmp->is_valid()) { |
| __ save_thread(tmp->as_register()); |
| } |
| __ call(dest, relocInfo::runtime_call_type); |
| __ delayed()->nop(); |
| if (info != NULL) { |
| add_call_info_here(info); |
| } |
| if (tmp->is_valid()) { |
| __ restore_thread(tmp->as_register()); |
| } |
| |
| #ifdef ASSERT |
| __ verify_thread(); |
| #endif // ASSERT |
| } |
| |
| |
| void LIR_Assembler::volatile_move_op(LIR_Opr src, LIR_Opr dest, BasicType type, CodeEmitInfo* info) { |
| #ifdef _LP64 |
| ShouldNotReachHere(); |
| #endif |
| |
| NEEDS_CLEANUP; |
| if (type == T_LONG) { |
| LIR_Address* mem_addr = dest->is_address() ? dest->as_address_ptr() : src->as_address_ptr(); |
| |
| // (extended to allow indexed as well as constant displaced for JSR-166) |
| Register idx = noreg; // contains either constant offset or index |
| |
| int disp = mem_addr->disp(); |
| if (mem_addr->index() == LIR_OprFact::illegalOpr) { |
| if (!Assembler::is_simm13(disp)) { |
| idx = O7; |
| __ set(disp, idx); |
| } |
| } else { |
| assert(disp == 0, "not both indexed and disp"); |
| idx = mem_addr->index()->as_register(); |
| } |
| |
| int null_check_offset = -1; |
| |
| Register base = mem_addr->base()->as_register(); |
| if (src->is_register() && dest->is_address()) { |
| // G4 is high half, G5 is low half |
| if (VM_Version::v9_instructions_work()) { |
| // clear the top bits of G5, and scale up G4 |
| __ srl (src->as_register_lo(), 0, G5); |
| __ sllx(src->as_register_hi(), 32, G4); |
| // combine the two halves into the 64 bits of G4 |
| __ or3(G4, G5, G4); |
| null_check_offset = __ offset(); |
| if (idx == noreg) { |
| __ stx(G4, base, disp); |
| } else { |
| __ stx(G4, base, idx); |
| } |
| } else { |
| __ mov (src->as_register_hi(), G4); |
| __ mov (src->as_register_lo(), G5); |
| null_check_offset = __ offset(); |
| if (idx == noreg) { |
| __ std(G4, base, disp); |
| } else { |
| __ std(G4, base, idx); |
| } |
| } |
| } else if (src->is_address() && dest->is_register()) { |
| null_check_offset = __ offset(); |
| if (VM_Version::v9_instructions_work()) { |
| if (idx == noreg) { |
| __ ldx(base, disp, G5); |
| } else { |
| __ ldx(base, idx, G5); |
| } |
| __ srax(G5, 32, dest->as_register_hi()); // fetch the high half into hi |
| __ mov (G5, dest->as_register_lo()); // copy low half into lo |
| } else { |
| if (idx == noreg) { |
| __ ldd(base, disp, G4); |
| } else { |
| __ ldd(base, idx, G4); |
| } |
| // G4 is high half, G5 is low half |
| __ mov (G4, dest->as_register_hi()); |
| __ mov (G5, dest->as_register_lo()); |
| } |
| } else { |
| Unimplemented(); |
| } |
| if (info != NULL) { |
| add_debug_info_for_null_check(null_check_offset, info); |
| } |
| |
| } else { |
| // use normal move for all other volatiles since they don't need |
| // special handling to remain atomic. |
| move_op(src, dest, type, lir_patch_none, info, false, false); |
| } |
| } |
| |
| void LIR_Assembler::membar() { |
| // only StoreLoad membars are ever explicitly needed on sparcs in TSO mode |
| __ membar( Assembler::Membar_mask_bits(Assembler::StoreLoad) ); |
| } |
| |
| void LIR_Assembler::membar_acquire() { |
| // no-op on TSO |
| } |
| |
| void LIR_Assembler::membar_release() { |
| // no-op on TSO |
| } |
| |
| // Macro to Pack two sequential registers containing 32 bit values |
| // into a single 64 bit register. |
| // rs and rs->successor() are packed into rd |
| // rd and rs may be the same register. |
| // Note: rs and rs->successor() are destroyed. |
| void LIR_Assembler::pack64( Register rs, Register rd ) { |
| __ sllx(rs, 32, rs); |
| __ srl(rs->successor(), 0, rs->successor()); |
| __ or3(rs, rs->successor(), rd); |
| } |
| |
| // Macro to unpack a 64 bit value in a register into |
| // two sequential registers. |
| // rd is unpacked into rd and rd->successor() |
| void LIR_Assembler::unpack64( Register rd ) { |
| __ mov(rd, rd->successor()); |
| __ srax(rd, 32, rd); |
| __ sra(rd->successor(), 0, rd->successor()); |
| } |
| |
| |
| void LIR_Assembler::leal(LIR_Opr addr_opr, LIR_Opr dest) { |
| LIR_Address* addr = addr_opr->as_address_ptr(); |
| assert(addr->index()->is_illegal() && addr->scale() == LIR_Address::times_1 && Assembler::is_simm13(addr->disp()), "can't handle complex addresses yet"); |
| __ add(addr->base()->as_register(), addr->disp(), dest->as_register()); |
| } |
| |
| |
| void LIR_Assembler::get_thread(LIR_Opr result_reg) { |
| assert(result_reg->is_register(), "check"); |
| __ mov(G2_thread, result_reg->as_register()); |
| } |
| |
| |
| void LIR_Assembler::peephole(LIR_List* lir) { |
| LIR_OpList* inst = lir->instructions_list(); |
| for (int i = 0; i < inst->length(); i++) { |
| LIR_Op* op = inst->at(i); |
| switch (op->code()) { |
| case lir_cond_float_branch: |
| case lir_branch: { |
| LIR_OpBranch* branch = op->as_OpBranch(); |
| assert(branch->info() == NULL, "shouldn't be state on branches anymore"); |
| LIR_Op* delay_op = NULL; |
| // we'd like to be able to pull following instructions into |
| // this slot but we don't know enough to do it safely yet so |
| // only optimize block to block control flow. |
| if (LIRFillDelaySlots && branch->block()) { |
| LIR_Op* prev = inst->at(i - 1); |
| if (prev && LIR_Assembler::is_single_instruction(prev) && prev->info() == NULL) { |
| // swap previous instruction into delay slot |
| inst->at_put(i - 1, op); |
| inst->at_put(i, new LIR_OpDelay(prev, op->info())); |
| #ifndef PRODUCT |
| if (LIRTracePeephole) { |
| tty->print_cr("delayed"); |
| inst->at(i - 1)->print(); |
| inst->at(i)->print(); |
| } |
| #endif |
| continue; |
| } |
| } |
| |
| if (!delay_op) { |
| delay_op = new LIR_OpDelay(new LIR_Op0(lir_nop), NULL); |
| } |
| inst->insert_before(i + 1, delay_op); |
| break; |
| } |
| case lir_static_call: |
| case lir_virtual_call: |
| case lir_icvirtual_call: |
| case lir_optvirtual_call: { |
| LIR_Op* delay_op = NULL; |
| LIR_Op* prev = inst->at(i - 1); |
| if (LIRFillDelaySlots && prev && prev->code() == lir_move && prev->info() == NULL && |
| (op->code() != lir_virtual_call || |
| !prev->result_opr()->is_single_cpu() || |
| prev->result_opr()->as_register() != O0) && |
| LIR_Assembler::is_single_instruction(prev)) { |
| // Only moves without info can be put into the delay slot. |
| // Also don't allow the setup of the receiver in the delay |
| // slot for vtable calls. |
| inst->at_put(i - 1, op); |
| inst->at_put(i, new LIR_OpDelay(prev, op->info())); |
| #ifndef PRODUCT |
| if (LIRTracePeephole) { |
| tty->print_cr("delayed"); |
| inst->at(i - 1)->print(); |
| inst->at(i)->print(); |
| } |
| #endif |
| continue; |
| } |
| |
| if (!delay_op) { |
| delay_op = new LIR_OpDelay(new LIR_Op0(lir_nop), op->as_OpJavaCall()->info()); |
| inst->insert_before(i + 1, delay_op); |
| } |
| break; |
| } |
| } |
| } |
| } |
| |
| |
| |
| |
| #undef __ |