| # |
| # Copyright (c) 2011, 2017, Oracle and/or its affiliates. All rights reserved. |
| # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
| # |
| # This code is free software; you can redistribute it and/or modify it |
| # under the terms of the GNU General Public License version 2 only, as |
| # published by the Free Software Foundation. Oracle designates this |
| # particular file as subject to the "Classpath" exception as provided |
| # by Oracle in the LICENSE file that accompanied this code. |
| # |
| # This code is distributed in the hope that it will be useful, but WITHOUT |
| # ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| # FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| # version 2 for more details (a copy is included in the LICENSE file that |
| # accompanied this code). |
| # |
| # You should have received a copy of the GNU General Public License version |
| # 2 along with this work; if not, write to the Free Software Foundation, |
| # Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. |
| # |
| # Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA |
| # or visit www.oracle.com if you need additional information or have any |
| # questions. |
| # |
| |
| ################################################################ |
| # |
| # Setup common utility functions. |
| # |
| ################################################################ |
| |
| ifndef _MAKEBASE_GMK |
| _MAKEBASE_GMK := 1 |
| |
| ifeq ($(wildcard $(SPEC)),) |
| $(error MakeBase.gmk needs SPEC set to a proper spec.gmk) |
| endif |
| |
| # By defining this pseudo target, make will automatically remove targets |
| # if their recipe fails so that a rebuild is automatically triggered on the |
| # next make invocation. |
| .DELETE_ON_ERROR: |
| |
| ################################################################################ |
| # Definitions for special characters |
| ################################################################################ |
| |
| # When calling macros, the spaces between arguments are |
| # often semantically important! Sometimes we need to subst |
| # spaces and commas, therefore we need the following macros. |
| X:= |
| SPACE:=$(X) $(X) |
| COMMA:=, |
| DOLLAR:=$$ |
| HASH:=\# |
| LEFT_PAREN:=( |
| RIGHT_PAREN:=) |
| SQUOTE:=' |
| #' |
| DQUOTE:=" |
| #" |
| define NEWLINE |
| |
| |
| endef |
| |
| # In GNU Make 4.0 and higher, there is a file function for writing to files. |
| ifeq (4.0, $(firstword $(sort 4.0 $(MAKE_VERSION)))) |
| HAS_FILE_FUNCTION := true |
| endif |
| |
| ############################## |
| # Functions |
| ############################## |
| |
| ### Debug functions |
| |
| # Prints the name and value of a variable |
| PrintVar = \ |
| $(info $(strip $1) >$($(strip $1))<) |
| |
| ### Functions for timers |
| |
| # Store the build times in this directory. |
| BUILDTIMESDIR=$(OUTPUTDIR)/make-support/build-times |
| |
| # Record starting time for build of a sub repository. |
| define RecordStartTime |
| $(DATE) '+%Y %m %d %H %M %S' | $(NAWK) '{ print $$1,$$2,$$3,$$4,$$5,$$6,($$4*3600+$$5*60+$$6) }' > $(BUILDTIMESDIR)/build_time_start_$(strip $1) && \ |
| $(DATE) '+%Y-%m-%d %H:%M:%S' > $(BUILDTIMESDIR)/build_time_start_$(strip $1)_human_readable |
| endef |
| |
| # Record ending time and calculate the difference and store it in a |
| # easy to read format. Handles builds that cross midnight. Expects |
| # that a build will never take 24 hours or more. |
| define RecordEndTime |
| $(DATE) '+%Y %m %d %H %M %S' | $(NAWK) '{ print $$1,$$2,$$3,$$4,$$5,$$6,($$4*3600+$$5*60+$$6) }' > $(BUILDTIMESDIR)/build_time_end_$(strip $1) |
| $(DATE) '+%Y-%m-%d %H:%M:%S' > $(BUILDTIMESDIR)/build_time_end_$(strip $1)_human_readable |
| $(ECHO) `$(CAT) $(BUILDTIMESDIR)/build_time_start_$(strip $1)` `$(CAT) $(BUILDTIMESDIR)/build_time_end_$(strip $1)` $1 | \ |
| $(NAWK) '{ F=$$7; T=$$14; if (F > T) { T+=3600*24 }; D=T-F; H=int(D/3600); \ |
| M=int((D-H*3600)/60); S=D-H*3600-M*60; printf("%02d:%02d:%02d %s\n",H,M,S,$$15); }' \ |
| > $(BUILDTIMESDIR)/build_time_diff_$(strip $1) |
| endef |
| |
| # Hook to be called when starting to execute a top-level target |
| define TargetEnter |
| $(PRINTF) "## Starting $(patsubst %-only,%,$@)\n" |
| $(call RecordStartTime,$(patsubst %-only,%,$@)) |
| endef |
| |
| # Hook to be called when finish executing a top-level target |
| define TargetExit |
| $(call RecordEndTime,$(patsubst %-only,%,$@)) |
| $(PRINTF) "## Finished $(patsubst %-only,%,$@) (build time %s)\n\n" \ |
| "`$(CAT) $(BUILDTIMESDIR)/build_time_diff_$(patsubst %-only,%,$@) | $(CUT) -f 1 -d ' '`" |
| endef |
| |
| ################################################################################ |
| # This macro translates $ into \$ to protect the $ from expansion in the shell. |
| # To make this macro resilient against already escaped strings, first remove |
| # any present escapes before escaping so that no double escapes are added. |
| EscapeDollar = $(subst $$,\$$,$(subst \$$,$$,$(strip $1))) |
| |
| ################################################################################ |
| # This macro works just like EscapeDollar above, but for #. |
| EscapeHash = $(subst \#,\\\#,$(subst \\\#,\#,$(strip $1))) |
| |
| ################################################################################ |
| # This macro translates $ into $$ to protect the string from make itself. |
| DoubleDollar = $(subst $$,$$$$,$(strip $1)) |
| |
| ################################################################################ |
| # ListPathsSafely can be used to print command parameters to a file. This is |
| # typically done if the command line lenght risk being too long for the |
| # OS/shell. In later make versions, the file function can be used for this |
| # purpose. For earlier versions, a more complex implementation is provided. |
| # |
| # The function ListPathsSafely can be called either directly or, more commonly |
| # from a recipe line. If called from a recipe, it will be executed in the |
| # evaluation phase of that recipe, which means that it will write to the file |
| # before any other line in the recipe has been run. |
| ifeq ($(HAS_FILE_FUNCTION), true) |
| # Param 1 - Name of variable containing paths/arguments to output |
| # Param 2 - File to print to |
| # Param 3 - Set to true to append to file instead of overwriting |
| define ListPathsSafely |
| $$(call MakeDir, $$(dir $$(strip $2))) |
| $$(file $$(if $$(filter true, $$(strip $3)),>>,>) \ |
| $$(strip $2),$$(subst $$(SPACE),$$(NEWLINE),$$(strip $$($$(strip $1))))) |
| endef |
| |
| else # HAS_FILE_FUNCTION = false |
| |
| $(eval compress_paths = \ |
| $(strip $(shell $(CAT) $(TOPDIR)/make/common/support/ListPathsSafely-pre-compress.incl))) |
| compress_paths += \ |
| $(subst $(TOPDIR),X97, \ |
| $(subst $(OUTPUTDIR),X98, \ |
| $(subst X,X00, \ |
| $(subst $(SPACE),\n,$(strip $1))))) |
| $(eval compress_paths += \ |
| $(strip $(shell $(CAT) $(TOPDIR)/make/common/support/ListPathsSafely-post-compress.incl))) |
| |
| decompress_paths=$(SED) -f $(TOPDIR)/make/common/support/ListPathsSafely-uncompress.sed \ |
| -e 's|X99|\\n|g' \ |
| -e 's|X98|$(OUTPUTDIR)|g' -e 's|X97|$(TOPDIR)|g' \ |
| -e 's|X00|X|g' |
| |
| ListPathsSafely_IfPrintf = \ |
| $(if $(word $3,$($(strip $1))), \ |
| $(shell $(PRINTF) -- "$(strip $(call EscapeDollar, \ |
| $(call compress_paths, $(wordlist $3,$4,$($(strip $1))))))\n" \ |
| | $(decompress_paths) >> $2)) |
| |
| # Param 1 - Name of variable containing paths/arguments to output |
| # Param 2 - File to print to |
| # Param 3 - Set to true to append to file instead of overwriting |
| define ListPathsSafely |
| ifneq (,$$(word 30001,$$($$(strip $1)))) |
| $$(error Cannot list safely more than 30000 paths. $1 has $$(words $$($$(strip $1))) paths!) |
| endif |
| $$(call MakeDir, $$(dir $2)) |
| ifneq ($$(strip $3), true) |
| $$(shell $(RM) $$(strip $2)) |
| endif |
| |
| $$(call ListPathsSafely_IfPrintf,$1,$2,1,250) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,251,500) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,501,750) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,751,1000) |
| |
| $$(call ListPathsSafely_IfPrintf,$1,$2,1001,1250) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,1251,1500) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,1501,1750) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,1751,2000) |
| |
| $$(call ListPathsSafely_IfPrintf,$1,$2,2001,2250) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,2251,2500) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,2501,2750) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,2751,3000) |
| |
| $$(call ListPathsSafely_IfPrintf,$1,$2,3001,3250) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,3251,3500) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,3501,3750) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,3751,4000) |
| |
| $$(call ListPathsSafely_IfPrintf,$1,$2,4001,4250) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,4251,4500) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,4501,4750) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,4751,5000) |
| |
| $$(call ListPathsSafely_IfPrintf,$1,$2,5001,5250) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,5251,5500) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,5501,5750) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,5751,6000) |
| |
| $$(call ListPathsSafely_IfPrintf,$1,$2,6001,6250) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,6251,6500) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,6501,6750) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,6751,7000) |
| |
| $$(call ListPathsSafely_IfPrintf,$1,$2,7001,7250) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,7251,7500) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,7501,7750) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,7751,8000) |
| |
| $$(call ListPathsSafely_IfPrintf,$1,$2,8001,8250) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,8251,8500) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,8501,8750) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,8751,9000) |
| |
| $$(call ListPathsSafely_IfPrintf,$1,$2,9001,9250) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,9251,9500) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,9501,9750) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,9751,10000) |
| |
| $$(call ListPathsSafely_IfPrintf,$1,$2,10001,10250) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,10251,10500) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,10501,10750) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,10751,11000) |
| |
| $$(call ListPathsSafely_IfPrintf,$1,$2,11001,11250) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,11251,11500) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,11501,11750) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,11751,12000) |
| |
| $$(call ListPathsSafely_IfPrintf,$1,$2,12001,12250) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,12251,12500) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,12501,12750) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,12751,13000) |
| |
| $$(call ListPathsSafely_IfPrintf,$1,$2,13001,13250) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,13251,13500) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,13501,13750) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,13751,14000) |
| |
| $$(call ListPathsSafely_IfPrintf,$1,$2,14001,14250) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,14251,14500) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,14501,14750) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,14751,15000) |
| |
| $$(call ListPathsSafely_IfPrintf,$1,$2,15001,15250) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,15251,15500) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,15501,15750) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,15751,16000) |
| |
| $$(call ListPathsSafely_IfPrintf,$1,$2,16001,16250) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,16251,16500) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,16501,16750) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,16751,17000) |
| |
| $$(call ListPathsSafely_IfPrintf,$1,$2,17001,17250) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,17251,17500) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,17501,17750) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,17751,18000) |
| |
| $$(call ListPathsSafely_IfPrintf,$1,$2,18001,18250) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,18251,18500) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,18501,18750) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,18751,19000) |
| |
| $$(call ListPathsSafely_IfPrintf,$1,$2,19001,19250) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,19251,19500) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,19501,19750) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,19751,20000) |
| |
| $$(call ListPathsSafely_IfPrintf,$1,$2,20001,20250) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,20251,20500) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,20501,20750) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,20751,21000) |
| |
| $$(call ListPathsSafely_IfPrintf,$1,$2,21001,21250) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,21251,21500) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,21501,21750) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,21751,22000) |
| |
| $$(call ListPathsSafely_IfPrintf,$1,$2,22001,22250) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,22251,22500) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,22501,22750) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,22751,23000) |
| |
| $$(call ListPathsSafely_IfPrintf,$1,$2,23001,23250) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,23251,23500) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,23501,23750) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,23751,24000) |
| |
| $$(call ListPathsSafely_IfPrintf,$1,$2,24001,24250) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,24251,24500) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,24501,24750) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,24751,25000) |
| |
| $$(call ListPathsSafely_IfPrintf,$1,$2,25001,25250) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,25251,25500) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,25501,25750) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,25751,26000) |
| |
| $$(call ListPathsSafely_IfPrintf,$1,$2,26001,26250) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,26251,26500) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,26501,26750) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,26751,27000) |
| |
| $$(call ListPathsSafely_IfPrintf,$1,$2,27001,27250) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,27251,27500) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,27501,27750) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,27751,28000) |
| |
| $$(call ListPathsSafely_IfPrintf,$1,$2,28001,28250) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,28251,28500) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,28501,28750) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,28751,29000) |
| |
| $$(call ListPathsSafely_IfPrintf,$1,$2,29001,29250) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,29251,29500) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,29501,29750) |
| $$(call ListPathsSafely_IfPrintf,$1,$2,29751,30000) |
| endef |
| endif # HAS_FILE_FUNCTION |
| |
| ################################################################################ |
| |
| # A file containing a way to uniquely identify the source code revision that |
| # the build was created from |
| SOURCE_REVISION_TRACKER := $(SUPPORT_OUTPUTDIR)/src-rev/source-revision-tracker |
| |
| # Locate all hg repositories included in the forest, as absolute paths |
| FindAllReposAbs = \ |
| $(strip $(sort $(dir $(filter-out $(TOPDIR)/build/%, $(wildcard \ |
| $(addprefix $(TOPDIR)/, .hg */.hg */*/.hg */*/*/.hg */*/*/*/.hg) \ |
| ))))) |
| |
| # Locate all hg repositories included in the forest, as relative paths |
| FindAllReposRel = \ |
| $(strip $(subst $(TOPDIR)/,.,$(patsubst $(TOPDIR)/%/, %, $(FindAllReposAbs)))) |
| |
| ################################################################################ |
| |
| define SetupLogging |
| ifeq ($$(LOG_PROFILE_TIMES_FILE), true) |
| ifeq ($$(IS_GNU_TIME), yes) |
| SHELL := $$(BASH) $$(TOPDIR)/make/scripts/shell-profiler.sh \ |
| gnutime $$(TIME) \ |
| $$(OUTPUTDIR)/build-profile.log $$(SHELL) |
| else ifneq ($$(FLOCK), ) |
| SHELL := $$(BASH) $$(TOPDIR)/make/scripts/shell-profiler.sh \ |
| flock $$(FLOCK) \ |
| $$(OUTPUTDIR)/build-profile.log $$(SHELL) |
| endif |
| endif |
| |
| ifeq ($$(LOG_LEVEL), trace) |
| SHELL_NO_RECURSE := $$(SHELL) |
| # Shell redefinition trick inspired by http://www.cmcrossroads.com/ask-mr-make/6535-tracing-rule-execution-in-gnu-make |
| # For each target executed, will print |
| # Building <TARGET> (from <FIRST PREREQUISITE>) (<ALL NEWER PREREQUISITES> newer) |
| # but with a limit of 20 on <ALL NEWER PREREQUISITES>, to avoid cluttering logs too much |
| # (and causing a crash on Cygwin). |
| SHELL = $$(warning $$(if $$@,Building $$@,Running shell command) $$(if $$<, (from $$<))$$(if $$?, ($$(wordlist 1, 20, $$?) $$(if $$(wordlist 21, 22, $$?), ... [in total $$(words $$?) files]) newer)))$$(SHELL_NO_RECURSE) -x |
| endif |
| |
| # The warn level can never be turned off |
| LogWarn = $$(info $$(strip $$1)) |
| LOG_WARN := |
| ifneq ($$(findstring $$(LOG_LEVEL), info debug trace),) |
| LogInfo = $$(info $$(strip $$1)) |
| LOG_INFO := |
| else |
| LogInfo = |
| LOG_INFO := > /dev/null |
| endif |
| ifneq ($$(findstring $$(LOG_LEVEL), debug trace),) |
| LogDebug = $$(info $$(strip $$1)) |
| LOG_DEBUG := |
| else |
| LogDebug = |
| LOG_DEBUG := > /dev/null |
| endif |
| ifneq ($$(findstring $$(LOG_LEVEL), trace),) |
| LogTrace = $$(info $$(strip $$1)) |
| LOG_TRACE := |
| else |
| LogTrace = |
| LOG_TRACE := > /dev/null |
| endif |
| endef |
| |
| # Make sure logging is setup for everyone that includes MakeBase.gmk. |
| $(eval $(call SetupLogging)) |
| |
| ################################################################################ |
| # Creates a sequence of increasing numbers (inclusive). |
| # Param 1 - starting number |
| # Param 2 - ending number |
| sequence = \ |
| $(wordlist $1, $2, $(strip \ |
| $(eval SEQUENCE_COUNT :=) \ |
| $(call _sequence-do,$(strip $2)))) |
| |
| _sequence-do = \ |
| $(if $(word $1, $(SEQUENCE_COUNT)),, \ |
| $(eval SEQUENCE_COUNT += .) \ |
| $(words $(SEQUENCE_COUNT)) \ |
| $(call _sequence-do,$1)) |
| |
| ################################################################################ |
| |
| MAX_PARAMS := 35 |
| PARAM_SEQUENCE := $(call sequence, 2, $(MAX_PARAMS)) |
| |
| # Template for creating a macro taking named parameters. To use it, assign the |
| # template to a variable with the name you want for your macro, using '=' |
| # assignment. Then define a macro body with the suffix "Body". The Body macro |
| # should take 1 parameter which should be a unique string for that invocation |
| # of the macro. |
| # Ex: |
| # SetupFoo = $(NamedParamsMacroTemplate) |
| # define SetupFooBody |
| # # do something |
| # # access parameters as $$($1_BAR) |
| # endef |
| # Call it like this |
| # $(eval $(call SetupFoo, BUILD_SOMETHING, \ |
| # BAR := some parameter value, \ |
| # )) |
| define NamedParamsMacroTemplate |
| $(if $($(MAX_PARAMS)),$(error Internal makefile error: \ |
| Too many named arguments to macro, please update MAX_PARAMS in MakeBase.gmk)) |
| # Iterate over 2 3 4... and evaluate the named parameters with $1_ as prefix |
| $(foreach i,$(PARAM_SEQUENCE), $(if $(strip $($i)),\ |
| $(strip $1)_$(strip $(call EscapeHash, $(call DoubleDollar, $($i))))$(NEWLINE))) |
| # Debug print all named parameter names and values |
| $(if $(findstring $(LOG_LEVEL),debug trace), \ |
| $(info $0 $(strip $1) $(foreach i,$(PARAM_SEQUENCE), \ |
| $(if $(strip $($i)),$(NEWLINE) $(strip [$i] $(if $(filter $(LOG_LEVEL), trace), \ |
| $($i), $(wordlist 1, 20, $($(i))) $(if $(word 21, $($(i))), ...))))))) |
| |
| $(if $(DEBUG_$(strip $1)), |
| $(info -------- <<< Begin expansion of $(strip $1)) \ |
| $(info $(call $(0)Body,$(strip $1))) \ |
| $(info -------- >>> End expansion of $(strip $1)) \ |
| ) |
| |
| $(call $(0)Body,$(strip $1)) |
| endef |
| |
| ################################################################################ |
| # Replace question marks with space in string. This macro needs to be called on |
| # files from CacheFind in case any of them contains space in their file name, |
| # since CacheFind replaces space with ?. |
| # Param 1 - String to replace in |
| DecodeSpace = \ |
| $(subst ?,$(SPACE),$(strip $1)) |
| EncodeSpace = \ |
| $(subst $(SPACE),?,$(strip $1)) |
| |
| ################################################################################ |
| # Make directory without forking mkdir if not needed |
| # 1: List of directories to create |
| MakeDir = \ |
| $(strip \ |
| $(eval MakeDir_dirs_to_make := $(strip $(foreach d, $1, $(if $(wildcard $d), , \ |
| "$(call DecodeSpace, $d)")))) \ |
| $(if $(MakeDir_dirs_to_make), $(shell $(MKDIR) -p $(MakeDir_dirs_to_make))) \ |
| ) |
| |
| ################################################################################ |
| # Assign a variable only if it is empty |
| # Param 1 - Variable to assign |
| # Param 2 - Value to assign |
| SetIfEmpty = \ |
| $(if $($(strip $1)),,$(eval $(strip $1) := $2)) |
| |
| ################################################################################ |
| # All install-file and related macros automatically call DecodeSpace when needed. |
| |
| ifeq ($(OPENJDK_TARGET_OS),solaris) |
| # On Solaris, if the target is a symlink and exists, cp won't overwrite. |
| # Cp has to operate in recursive mode to allow for -P flag, to preserve soft links. If the |
| # name of the target file differs from the source file, rename after copy. |
| # If the source and target parent directories are the same, recursive copy doesn't work |
| # so we fall back on regular copy, which isn't preserving symlinks. |
| define install-file |
| $(call MakeDir, $(@D)) |
| $(RM) '$(call DecodeSpace, $@)' |
| if [ '$(call DecodeSpace, $(dir $@))' != \ |
| '$(call DecodeSpace, $(dir $(call EncodeSpace, $<)))' ]; then \ |
| $(CP) -f -r -P '$(call DecodeSpace, $<)' '$(call DecodeSpace, $(@D))'; \ |
| if [ '$(call DecodeSpace, $(@F))' != \ |
| '$(call DecodeSpace, $(notdir $(call EncodeSpace, $(<))))' ]; then \ |
| $(MV) '$(call DecodeSpace, $(@D)/$(<F))' '$(call DecodeSpace, $@)'; \ |
| fi; \ |
| else \ |
| if [ -L '$(call DecodeSpace, $<)' ]; then \ |
| $(ECHO) "Source file is a symlink and target is in the same directory: $< $@" ; \ |
| exit 1; \ |
| fi; \ |
| $(CP) -f '$(call DecodeSpace, $<)' '$(call DecodeSpace, $@)'; \ |
| fi |
| endef |
| else ifeq ($(OPENJDK_TARGET_OS),macosx) |
| # On mac, extended attributes sometimes creep into the source files, which may later |
| # cause the creation of ._* files which confuses testing. Clear these with xattr if |
| # set. Some files get their write permissions removed after being copied to the |
| # output dir. When these are copied again to images, xattr would fail. By only clearing |
| # attributes when they are present, failing on this is avoided. |
| # |
| # If copying a soft link to a directory, need to delete the target first to avoid |
| # weird errors. |
| define install-file |
| $(call MakeDir, $(@D)) |
| $(RM) '$(call DecodeSpace, $@)' |
| $(CP) -fRP '$(call DecodeSpace, $<)' '$(call DecodeSpace, $@)' |
| if [ -n "`$(XATTR) -l '$(call DecodeSpace, $@)'`" ]; then $(XATTR) -c '$(call DecodeSpace, $@)'; fi |
| endef |
| else |
| define install-file |
| $(call MakeDir, $(@D)) |
| $(CP) -fP '$(call DecodeSpace, $<)' '$(call DecodeSpace, $@)' |
| endef |
| endif |
| |
| # Variant of install file that does not preserve symlinks |
| define install-file-nolink |
| $(call MakeDir, $(@D)) |
| $(CP) -f '$(call DecodeSpace, $<)' '$(call DecodeSpace, $@)' |
| endef |
| |
| ################################################################################ |
| # Take two paths and return the path of the last common directory. |
| # Ex: /foo/bar/baz, /foo/bar/banan -> /foo/bar |
| # foo/bar/baz, /foo/bar -> <empty> |
| # |
| # The x prefix is used to preserve the presence of the initial slash |
| # |
| # $1 - Path to compare |
| # $2 - Other path to compare |
| FindCommonPathPrefix = \ |
| $(patsubst x%,%,$(subst $(SPACE),/,$(strip \ |
| $(call FindCommonPathPrefixHelper, \ |
| $(subst /,$(SPACE),x$(strip $1)), $(subst /,$(SPACE),x$(strip $2))) \ |
| ))) |
| |
| FindCommonPathPrefixHelper = \ |
| $(if $(call equals, $(firstword $1), $(firstword $2)), \ |
| $(firstword $1) \ |
| $(call FindCommonPathPrefixHelper, \ |
| $(wordlist 2, $(words $1), $1), $(wordlist 2, $(words $2), $2) \ |
| ) \ |
| ) |
| |
| # Convert a partial path into as many directory levels of ../, removing |
| # leading and following /. |
| # Ex: foo/bar/baz/ -> ../../.. |
| # foo/bar -> ../.. |
| # /foo -> .. |
| DirToDotDot = \ |
| $(subst $(SPACE),/,$(foreach d, $(subst /,$(SPACE),$1),..)) |
| |
| # Computes the relative path from a directory to a file |
| # $1 - File to compute the relative path to |
| # $2 - Directory to compute the relative path from |
| RelativePath = \ |
| $(eval $1_prefix := $(call FindCommonPathPrefix, $1, $2)) \ |
| $(eval $1_dotdots := $(call DirToDotDot, $(patsubst $($(strip $1)_prefix)/%, %, $2))) \ |
| $(eval $1_suffix := $(patsubst $($(strip $1)_prefix)/%, %, $1)) \ |
| $($(strip $1)_dotdots)/$($(strip $1)_suffix) |
| |
| ################################################################################ |
| # link-file-* works similarly to install-file but creates a symlink instead. |
| # There are two versions, either creating a relative or an absolute link. Be |
| # careful when using this on Windows since the symlink created is only valid in |
| # the unix emulation environment. |
| define link-file-relative |
| $(call MakeDir, $(@D)) |
| $(RM) '$(call DecodeSpace, $@)' |
| $(LN) -s '$(call DecodeSpace, $(call RelativePath, $<, $(@D)))' '$(call DecodeSpace, $@)' |
| endef |
| |
| define link-file-absolute |
| $(call MakeDir, $(@D)) |
| $(RM) '$(call DecodeSpace, $@)' |
| $(LN) -s '$(call DecodeSpace, $<)' '$(call DecodeSpace, $@)' |
| endef |
| |
| ################################################################################ |
| # Filter out duplicate sub strings while preserving order. Keeps the first occurance. |
| uniq = \ |
| $(if $1,$(firstword $1) $(call uniq,$(filter-out $(firstword $1),$1))) |
| |
| # Returns all whitespace-separated words in $2 where at least one of the |
| # whitespace-separated words in $1 is a substring. |
| containing = \ |
| $(strip \ |
| $(foreach v,$(strip $2),\ |
| $(call uniq,$(foreach p,$(strip $1),$(if $(findstring $p,$v),$v))))) |
| |
| # Returns all whitespace-separated words in $2 where none of the |
| # whitespace-separated words in $1 is a substring. |
| not-containing = \ |
| $(strip $(filter-out $(call containing,$1,$2),$2)) |
| |
| # Return a list of all string elements that are duplicated in $1. |
| dups = \ |
| $(strip $(foreach v, $(sort $1), $(if $(filter-out 1, \ |
| $(words $(filter $v, $1))), $v))) |
| |
| # String equals |
| equals = \ |
| $(and $(findstring $(strip $1),$(strip $2)),\ |
| $(findstring $(strip $2),$(strip $1))) |
| |
| # Remove a whole list of prefixes |
| # $1 - List of prefixes |
| # $2 - List of elements to process |
| remove-prefixes = \ |
| $(strip $(if $1,$(patsubst $(firstword $1)%,%,\ |
| $(call remove-prefixes,$(filter-out $(firstword $1),$1),$2)),$2)) |
| |
| # Convert the string given to upper case, without any $(shell) |
| # Inspired by http://lists.gnu.org/archive/html/help-make/2013-09/msg00009.html |
| uppercase_table := a,A b,B c,C d,D e,E f,F g,G h,H i,I j,J k,K l,L m,M n,N o,O \ |
| p,P q,Q r,R s,S t,T u,U v,V w,W x,X y,Y z,Z |
| |
| uppercase_internal = \ |
| $(if $(strip $1), $$(subst $(firstword $1), $(call uppercase_internal, \ |
| $(wordlist 2, $(words $1), $1), $2)), $2) |
| |
| # Convert a string to upper case. Works only on a-z. |
| # $1 - The string to convert |
| uppercase = \ |
| $(strip \ |
| $(eval uppercase_result := $(call uppercase_internal, $(uppercase_table), $1)) \ |
| $(uppercase_result) \ |
| ) |
| |
| ################################################################################ |
| |
| ifneq ($(DISABLE_CACHE_FIND), true) |
| # In Cygwin, finds are very costly, both because of expensive forks and because |
| # of bad file system caching. Find is used extensively in $(shell) commands to |
| # find source files. This makes rerunning make with no or few changes rather |
| # expensive. To speed this up, these two macros are used to cache the results |
| # of simple find commands for reuse. |
| # |
| # Runs a find and stores both the directories where it was run and the results. |
| # This macro can be called multiple times to add to the cache. Only finds files |
| # with no filters. |
| # |
| # Files containing space will get spaces replaced with ? because GNU Make |
| # cannot handle lists of files with space in them. By using ?, make will match |
| # the wildcard to space in many situations so we don't need to replace back |
| # to space on every use. While not a complete solution it does allow some uses |
| # of CacheFind to function with spaces in file names, including for |
| # SetupCopyFiles. |
| # |
| # Needs to be called with $(eval ) |
| # |
| # Even if the performance benifit is negligible on other platforms, keep the |
| # functionality active unless explicitly disabled to exercise it more. |
| # |
| # Initialize FIND_CACHE_DIRS with := to make it a non recursively-expanded variable |
| FIND_CACHE_DIRS := |
| # Param 1 - Dirs to find in |
| # Param 2 - (optional) specialization. Normally "-a \( ... \)" expression. |
| define FillCacheFind |
| # Filter out already cached dirs. The - is needed when FIND_CACHE_DIRS is empty |
| # since filter out will then return empty. |
| FIND_CACHE_NEW_DIRS := $$(filter-out $$(addsuffix /%,\ |
| - $(FIND_CACHE_DIRS)) $(FIND_CACHE_DIRS), $1) |
| ifneq ($$(FIND_CACHE_NEW_DIRS), ) |
| # Remove any trailing slash from dirs in the cache dir list |
| FIND_CACHE_DIRS += $$(patsubst %/,%, $$(FIND_CACHE_NEW_DIRS)) |
| FIND_CACHE := $$(sort $$(FIND_CACHE) $$(shell $(FIND) $$(FIND_CACHE_NEW_DIRS) \ |
| \( -type f -o -type l \) $2 | $(TR) ' ' '?')) |
| endif |
| endef |
| |
| # Mimics find by looking in the cache if all of the directories have been cached. |
| # Otherwise reverts to shell find. This is safe to call on all platforms, even if |
| # cache is deactivated. |
| # |
| # $1 can be either a directory or a file. If it's a directory, make |
| # sure we have exactly one trailing slash before the wildcard. |
| # The extra - is needed when FIND_CACHE_DIRS is empty but should be harmless. |
| # |
| # Param 1 - Dirs to find in |
| # Param 2 - (optional) specialization. Normally "-a \( ... \)" expression. |
| define CacheFind |
| $(if $(filter-out $(addsuffix /%,- $(FIND_CACHE_DIRS)) $(FIND_CACHE_DIRS),$1), \ |
| $(if $(wildcard $1), $(shell $(FIND) $1 \( -type f -o -type l \) $2 \ |
| | $(TR) ' ' '?')), \ |
| $(filter $(addsuffix /%,$(patsubst %/,%,$1)) $1,$(FIND_CACHE))) |
| endef |
| |
| else |
| # If CacheFind is disabled, just run the find command. |
| # Param 1 - Dirs to find in |
| # Param 2 - (optional) specialization. Normally "-a \( ... \)" expression. |
| define CacheFind |
| $(shell $(FIND) $1 \( -type f -o -type l \) $2 | $(TR) ' ' '?') |
| endef |
| endif |
| |
| ################################################################################ |
| |
| define AddFileToCopy |
| # Helper macro for SetupCopyFiles |
| # 1 : Source file |
| # 2 : Dest file |
| # 3 : Variable to add targets to |
| # 4 : Macro to call for copy operation |
| # 5 : Action text to log |
| $2: $1 |
| $$(call LogInfo, $(strip $5) $$(patsubst $(OUTPUTDIR)/%,%,$$(call DecodeSpace, $$@))) |
| $$($$(strip $4)) |
| |
| $3 += $2 |
| endef |
| |
| # Returns the value of the first argument |
| identity = \ |
| $(strip $1) |
| |
| # Setup make rules for copying files, with an option to do more complex |
| # processing instead of copying. |
| # |
| # Parameter 1 is the name of the rule. This name is used as variable prefix, |
| # and the targets generated are listed in a variable by that name. |
| # |
| # Remaining parameters are named arguments. These include: |
| # SRC : Source root dir (defaults to dir of first file) |
| # DEST : Dest root dir |
| # FILES : List of files to copy with absolute paths, or path relative to SRC. |
| # Must be in SRC. |
| # FLATTEN : Set to flatten the directory structure in the DEST dir. |
| # MACRO : Optionally override the default macro used for making the copy. |
| # Default is 'install-file' |
| # NAME_MACRO : Optionally supply a macro that rewrites the target file name |
| # based on the source file name |
| # LOG_ACTION : Optionally specify a different action text for log messages |
| SetupCopyFiles = $(NamedParamsMacroTemplate) |
| define SetupCopyFilesBody |
| |
| ifeq ($$($1_MACRO), ) |
| $1_MACRO := install-file |
| endif |
| |
| # Default SRC to the dir of the first file. |
| ifeq ($$($1_SRC), ) |
| $1_SRC := $$(dir $$(firstword $$($1_FILES))) |
| endif |
| |
| ifeq ($$($1_NAME_MACRO), ) |
| $1_NAME_MACRO := identity |
| endif |
| |
| ifeq ($$($1_LOG_ACTION), ) |
| $1_LOG_ACTION := Copying |
| endif |
| |
| # Remove any trailing slash from SRC and DEST |
| $1_SRC := $$(patsubst %/,%,$$($1_SRC)) |
| $1_DEST := $$(patsubst %/,%,$$($1_DEST)) |
| |
| $$(foreach f, $$(patsubst $$($1_SRC)/%,%,$$($1_FILES)), \ |
| $$(eval $$(call AddFileToCopy, $$($1_SRC)/$$f, \ |
| $$($1_DEST)/$$(call $$(strip $$($1_NAME_MACRO)),$$(if $$($1_FLATTEN),$$(notdir $$f),$$f)), \ |
| $1, $$($1_MACRO), $$($1_LOG_ACTION)))) |
| |
| endef |
| |
| ################################################################################ |
| # Parse a multiple-keyword variable, like FOO="KEYWORD1=val1;KEYWORD2=val2;..." |
| # These will be converted into a series of variables like FOO_KEYWORD1=val1, |
| # FOO_KEYWORD2=val2, etc. Unknown keywords will cause an error. |
| # |
| # Parameter 1 is the name of the rule, and is also the name of the variable. |
| # |
| # Remaining parameters are named arguments. These include: |
| # KEYWORDS A list of valid keywords |
| # STRING_KEYWORDS A list of valid keywords, processed as string. This means |
| # that '%20' will be replaced by ' ' to allow for multi-word strings. |
| # |
| ParseKeywordVariable = $(NamedParamsMacroTemplate) |
| define ParseKeywordVariableBody |
| ifneq ($$($1), ) |
| # To preserve spaces, substitute them with a hopefully unique pattern |
| # before splitting and then re-substitute spaces back. |
| $1_MANGLED := $$(subst $$(SPACE),||||,$$($1)) |
| $$(foreach mangled_part, $$(subst ;, , $$($1_MANGLED)), \ |
| $$(eval mangled_part_eval := $$(call DoubleDollar, $$(mangled_part))) \ |
| $$(eval part := $$$$(subst ||||,$$$$(SPACE),$$$$(mangled_part_eval))) \ |
| $$(eval $1_NO_MATCH := true) \ |
| $$(foreach keyword, $$($1_KEYWORDS), \ |
| $$(eval keyword_eval := $$(call DoubleDollar, $$(keyword))) \ |
| $$(if $$(filter $$(keyword)=%, $$(part)), \ |
| $$(eval $(strip $1)_$$$$(keyword_eval) := $$$$(strip $$$$(patsubst $$$$(keyword_eval)=%, %, $$$$(part)))) \ |
| $$(eval $1_NO_MATCH := ) \ |
| ) \ |
| ) \ |
| $$(foreach keyword, $$($1_STRING_KEYWORDS), \ |
| $$(eval keyword_eval := $$(call DoubleDollar, $$(keyword))) \ |
| $$(if $$(filter $$(keyword)=%, $$(part)), \ |
| $$(eval $(strip $1)_$$$$(keyword_eval) := $$$$(strip $$$$(subst %20, , $$$$(patsubst $$$$(keyword_eval)=%, %, $$$$(part))))) \ |
| $$(eval $1_NO_MATCH := ) \ |
| ) \ |
| ) \ |
| $$(if $$($1_NO_MATCH), \ |
| $$(if $$(filter $$(part), $$($1_KEYWORDS) $$($1_STRING_KEYWORDS)), \ |
| $$(info Keyword $$(part) for $1 needs to be assigned a value.) \ |
| , \ |
| $$(info $$(part) is not a valid keyword for $1.) \ |
| $$(info Valid keywords: $$($1_KEYWORDS) $$($1_STRING_KEYWORDS).) \ |
| ) \ |
| $$(error Cannot continue) \ |
| ) \ |
| ) |
| endif |
| endef |
| |
| ################################################################################ |
| # ShellQuote |
| # |
| # Quotes a string with single quotes and replaces single quotes with '\'' so |
| # that the contents survives being given to the shell. |
| |
| ShellQuote = \ |
| $(SQUOTE)$(subst $(SQUOTE),$(SQUOTE)\$(SQUOTE)$(SQUOTE),$(strip $1))$(SQUOTE) |
| |
| ################################################################################ |
| # FixPath |
| # |
| # On Windows, converts a path from cygwin/unix style (e.g. /bin/foo) into |
| # "mixed mode" (e.g. c:/cygwin/bin/foo). On other platforms, return the path |
| # unchanged. |
| # This is normally not needed since we use the FIXPATH prefix for command lines, |
| # but might be needed in certain circumstances. |
| ifeq ($(OPENJDK_TARGET_OS), windows) |
| FixPath = \ |
| $(shell $(CYGPATH) -m $1) |
| else |
| FixPath = \ |
| $1 |
| endif |
| |
| ################################################################################ |
| # Write to and read from file |
| |
| # Param 1 - File to read |
| ReadFile = \ |
| $(shell $(CAT) $1) |
| |
| # Param 1 - Text to write |
| # Param 2 - File to write to |
| ifeq ($(HAS_FILE_FUNCTION), true) |
| WriteFile = \ |
| $(file >$2,$(strip $1)) |
| else |
| # Use printf to get consistent behavior on all platforms. |
| WriteFile = \ |
| $(shell $(PRINTF) "%s" $(call ShellQuote, $1) > $2) |
| endif |
| |
| ################################################################################ |
| # DependOnVariable |
| # |
| # This macro takes a variable name and puts the value in a file only if the |
| # value has changed since last. The name of the file is returned. This can be |
| # used to create rule dependencies on make variable values. The following |
| # example would get rebuilt if the value of SOME_VAR was changed: |
| # |
| # path/to/some-file: $(call DependOnVariable, SOME_VAR) |
| # echo $(SOME_VAR) > $@ |
| # |
| # Note that leading and trailing white space in the value is ignored. |
| # |
| |
| # Defines the sub directory structure to store variable value file in |
| DependOnVariableDirName = \ |
| $(strip $(addsuffix $(if $(MODULE),/$(MODULE)), \ |
| $(subst $(TOPDIR)/,, $(if $(filter /%, $(firstword $(MAKEFILE_LIST))), \ |
| $(firstword $(MAKEFILE_LIST)), \ |
| $(CURDIR)/$(firstword $(MAKEFILE_LIST)))))) |
| |
| # Defines the name of the file to store variable value in. Generates a name |
| # unless parameter 2 is given. |
| # Param 1 - Name of variable |
| # Param 2 - (optional) name of file to store value in |
| DependOnVariableFileName = \ |
| $(strip $(if $(strip $2), $2, \ |
| $(MAKESUPPORT_OUTPUTDIR)/vardeps/$(DependOnVariableDirName)/$(strip $1).vardeps)) |
| |
| # Does the actual work with parameters stripped. |
| # If the file exists AND the contents is the same as the variable, do nothing |
| # else print a new file. |
| # Always returns the name of the file where the value was printed. |
| # Param 1 - Name of variable |
| # Param 2 - (optional) name of file to store value in |
| DependOnVariableHelper = \ |
| $(strip \ |
| $(eval -include $(call DependOnVariableFileName, $1, $2)) \ |
| $(if $(call equals, $(strip $($1)), $(strip $($1_old))),,\ |
| $(call MakeDir, $(dir $(call DependOnVariableFileName, $1, $2))) \ |
| $(if $(findstring $(LOG_LEVEL), trace), \ |
| $(info NewVariable $1: >$(strip $($1))<) \ |
| $(info OldVariable $1: >$(strip $($1_old))<)) \ |
| $(call WriteFile, $1_old:=$(call DoubleDollar,$(call EscapeHash,$($1))), \ |
| $(call DependOnVariableFileName, $1, $2))) \ |
| $(call DependOnVariableFileName, $1, $2) \ |
| ) |
| |
| # Main macro |
| # Param 1 - Name of variable |
| # Param 2 - (optional) name of file to store value in |
| DependOnVariable = \ |
| $(call DependOnVariableHelper,$(strip $1),$(strip $2)) |
| |
| # LogCmdlines is only intended to be used by ExecuteWithLog |
| ifeq ($(LOG_CMDLINES), true) |
| LogCmdlines = $(info $(strip $1)) |
| else |
| LogCmdlines = |
| endif |
| |
| ################################################################################ |
| # ExecuteWithLog will run a command and log the output appropriately. This is |
| # meant to be used by commands that do "real" work, like a compilation. |
| # The output is stored in a specified log file, which is displayed at the end |
| # of the build in case of failure. The command line itself is stored in a file, |
| # and also logged to stdout if the LOG=cmdlines option has been given. |
| # |
| # NOTE: If the command redirects stdout, the caller needs to wrap it in a |
| # subshell (by adding parentheses around it), otherwise the redirect to the |
| # subshell tee process will create a race condition where the target file may |
| # not be fully written when the make recipe is done. |
| # |
| # Param 1 - The path to base the name of the log file / command line file on |
| # Param 2 - The command to run |
| ExecuteWithLog = \ |
| $(call LogCmdlines, Exececuting: [$(strip $2)]) \ |
| $(call WriteFile, $2, $(strip $1).cmdline) \ |
| ( $(strip $2) > >($(TEE) $(strip $1).log) 2> >($(TEE) $(strip $1).log >&2) || \ |
| ( exitcode=$(DOLLAR)? && \ |
| $(CP) $(strip $1).log $(MAKESUPPORT_OUTPUTDIR)/failure-logs/$(subst /,_,$(patsubst $(OUTPUTDIR)/%,%,$(strip $1))).log && \ |
| $(CP) $(strip $1).cmdline $(MAKESUPPORT_OUTPUTDIR)/failure-logs/$(subst /,_,$(patsubst $(OUTPUTDIR)/%,%,$(strip $1))).cmdline && \ |
| exit $(DOLLAR)exitcode ) ) |
| |
| ################################################################################ |
| # Find lib dir for module |
| # Param 1 - module name |
| FindLibDirForModule = \ |
| $(SUPPORT_OUTPUTDIR)/modules_libs/$(strip $1) |
| |
| ################################################################################ |
| # Return a string suitable for use after a -classpath or --module-path option. It |
| # will be correct and safe to use on all platforms. Arguments are given as space |
| # separate classpath entries. Safe for multiple nested calls. |
| # param 1 : A space separated list of classpath entries |
| # The surrounding strip is needed to keep additional whitespace out |
| PathList = \ |
| "$(subst $(SPACE),$(PATH_SEP),$(strip $(subst $(DQUOTE),,$1)))" |
| |
| ################################################################################ |
| # Check if a specified hotspot variant is being built, or at least one of a |
| # list of variants. Will return 'true' or 'false'. |
| # $1 - the variant to test for |
| check-jvm-variant = \ |
| $(strip \ |
| $(if $(filter-out $(VALID_JVM_VARIANTS), $1), \ |
| $(error Internal error: Invalid variant tested: $1)) \ |
| $(if $(filter $1, $(JVM_VARIANTS)), true, false)) |
| |
| ################################################################################ |
| # Converts a space separated list to a comma separated list. |
| # |
| # Replacing double-comma with a single comma is to workaround the issue with |
| # some version of make on windows that doesn't substitute spaces with one comma |
| # properly. |
| CommaList = \ |
| $(strip \ |
| $(subst $(COMMA)$(COMMA),$(COMMA),$(subst $(SPACE),$(COMMA),$(strip $1))) \ |
| ) |
| |
| ################################################################################ |
| # Converts a space separated list to a colon separated list. |
| # |
| # Replacing double-colon with a single colon is to workaround the issue with |
| # some version of make on windows that doesn't substitute spaces with one colon |
| # properly. |
| ColonList = \ |
| $(strip \ |
| $(subst ::,:,$(subst $(SPACE),:,$(strip $1))) \ |
| ) |
| |
| ################################################################################ |
| |
| # Hook to include the corresponding custom file, if present. |
| $(eval $(call IncludeCustomExtension, common/MakeBase.gmk)) |
| |
| endif # _MAKEBASE_GMK |
