| /* |
| * Copyright (c) 2012, 2013, Oracle and/or its affiliates. All rights reserved. |
| * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
| * |
| * This code is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 only, as |
| * published by the Free Software Foundation. Oracle designates this |
| * particular file as subject to the "Classpath" exception as provided |
| * by Oracle in the LICENSE file that accompanied this code. |
| * |
| * This code is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * version 2 for more details (a copy is included in the LICENSE file that |
| * accompanied this code). |
| * |
| * You should have received a copy of the GNU General Public License version |
| * 2 along with this work; if not, write to the Free Software Foundation, |
| * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. |
| * |
| * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA |
| * or visit www.oracle.com if you need additional information or have any |
| * questions. |
| */ |
| |
| /* |
| * This file is available under and governed by the GNU General Public |
| * License version 2 only, as published by the Free Software Foundation. |
| * However, the following notice accompanied the original version of this |
| * file: |
| * |
| * Copyright (c) 2011-2012, Stephen Colebourne & Michael Nascimento Santos |
| * |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * |
| * * Redistributions of source code must retain the above copyright notice, |
| * this list of conditions and the following disclaimer. |
| * |
| * * Redistributions in binary form must reproduce the above copyright notice, |
| * this list of conditions and the following disclaimer in the documentation |
| * and/or other materials provided with the distribution. |
| * |
| * * Neither the name of JSR-310 nor the names of its contributors |
| * may be used to endorse or promote products derived from this software |
| * without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR |
| * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, |
| * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, |
| * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR |
| * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF |
| * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING |
| * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| package java.time.temporal; |
| |
| import java.io.IOException; |
| import java.io.InvalidObjectException; |
| import java.io.ObjectInputStream; |
| import java.io.Serializable; |
| import java.time.DateTimeException; |
| |
| /** |
| * The range of valid values for a date-time field. |
| * <p> |
| * All {@link TemporalField} instances have a valid range of values. |
| * For example, the ISO day-of-month runs from 1 to somewhere between 28 and 31. |
| * This class captures that valid range. |
| * <p> |
| * It is important to be aware of the limitations of this class. |
| * Only the minimum and maximum values are provided. |
| * It is possible for there to be invalid values within the outer range. |
| * For example, a weird field may have valid values of 1, 2, 4, 6, 7, thus |
| * have a range of '1 - 7', despite that fact that values 3 and 5 are invalid. |
| * <p> |
| * Instances of this class are not tied to a specific field. |
| * |
| * @implSpec |
| * This class is immutable and thread-safe. |
| * |
| * @since 1.8 |
| */ |
| public final class ValueRange implements Serializable { |
| |
| /** |
| * Serialization version. |
| */ |
| private static final long serialVersionUID = -7317881728594519368L; |
| |
| /** |
| * The smallest minimum value. |
| */ |
| private final long minSmallest; |
| /** |
| * The largest minimum value. |
| */ |
| private final long minLargest; |
| /** |
| * The smallest maximum value. |
| */ |
| private final long maxSmallest; |
| /** |
| * The largest maximum value. |
| */ |
| private final long maxLargest; |
| |
| /** |
| * Obtains a fixed value range. |
| * <p> |
| * This factory obtains a range where the minimum and maximum values are fixed. |
| * For example, the ISO month-of-year always runs from 1 to 12. |
| * |
| * @param min the minimum value |
| * @param max the maximum value |
| * @return the ValueRange for min, max, not null |
| * @throws IllegalArgumentException if the minimum is greater than the maximum |
| */ |
| public static ValueRange of(long min, long max) { |
| if (min > max) { |
| throw new IllegalArgumentException("Minimum value must be less than maximum value"); |
| } |
| return new ValueRange(min, min, max, max); |
| } |
| |
| /** |
| * Obtains a variable value range. |
| * <p> |
| * This factory obtains a range where the minimum value is fixed and the maximum value may vary. |
| * For example, the ISO day-of-month always starts at 1, but ends between 28 and 31. |
| * |
| * @param min the minimum value |
| * @param maxSmallest the smallest maximum value |
| * @param maxLargest the largest maximum value |
| * @return the ValueRange for min, smallest max, largest max, not null |
| * @throws IllegalArgumentException if |
| * the minimum is greater than the smallest maximum, |
| * or the smallest maximum is greater than the largest maximum |
| */ |
| public static ValueRange of(long min, long maxSmallest, long maxLargest) { |
| return of(min, min, maxSmallest, maxLargest); |
| } |
| |
| /** |
| * Obtains a fully variable value range. |
| * <p> |
| * This factory obtains a range where both the minimum and maximum value may vary. |
| * |
| * @param minSmallest the smallest minimum value |
| * @param minLargest the largest minimum value |
| * @param maxSmallest the smallest maximum value |
| * @param maxLargest the largest maximum value |
| * @return the ValueRange for smallest min, largest min, smallest max, largest max, not null |
| * @throws IllegalArgumentException if |
| * the smallest minimum is greater than the smallest maximum, |
| * or the smallest maximum is greater than the largest maximum |
| * or the largest minimum is greater than the largest maximum |
| */ |
| public static ValueRange of(long minSmallest, long minLargest, long maxSmallest, long maxLargest) { |
| if (minSmallest > minLargest) { |
| throw new IllegalArgumentException("Smallest minimum value must be less than largest minimum value"); |
| } |
| if (maxSmallest > maxLargest) { |
| throw new IllegalArgumentException("Smallest maximum value must be less than largest maximum value"); |
| } |
| if (minLargest > maxLargest) { |
| throw new IllegalArgumentException("Minimum value must be less than maximum value"); |
| } |
| return new ValueRange(minSmallest, minLargest, maxSmallest, maxLargest); |
| } |
| |
| /** |
| * Restrictive constructor. |
| * |
| * @param minSmallest the smallest minimum value |
| * @param minLargest the largest minimum value |
| * @param maxSmallest the smallest minimum value |
| * @param maxLargest the largest minimum value |
| */ |
| private ValueRange(long minSmallest, long minLargest, long maxSmallest, long maxLargest) { |
| this.minSmallest = minSmallest; |
| this.minLargest = minLargest; |
| this.maxSmallest = maxSmallest; |
| this.maxLargest = maxLargest; |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Is the value range fixed and fully known. |
| * <p> |
| * For example, the ISO day-of-month runs from 1 to between 28 and 31. |
| * Since there is uncertainty about the maximum value, the range is not fixed. |
| * However, for the month of January, the range is always 1 to 31, thus it is fixed. |
| * |
| * @return true if the set of values is fixed |
| */ |
| public boolean isFixed() { |
| return minSmallest == minLargest && maxSmallest == maxLargest; |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Gets the minimum value that the field can take. |
| * <p> |
| * For example, the ISO day-of-month always starts at 1. |
| * The minimum is therefore 1. |
| * |
| * @return the minimum value for this field |
| */ |
| public long getMinimum() { |
| return minSmallest; |
| } |
| |
| /** |
| * Gets the largest possible minimum value that the field can take. |
| * <p> |
| * For example, the ISO day-of-month always starts at 1. |
| * The largest minimum is therefore 1. |
| * |
| * @return the largest possible minimum value for this field |
| */ |
| public long getLargestMinimum() { |
| return minLargest; |
| } |
| |
| /** |
| * Gets the smallest possible maximum value that the field can take. |
| * <p> |
| * For example, the ISO day-of-month runs to between 28 and 31 days. |
| * The smallest maximum is therefore 28. |
| * |
| * @return the smallest possible maximum value for this field |
| */ |
| public long getSmallestMaximum() { |
| return maxSmallest; |
| } |
| |
| /** |
| * Gets the maximum value that the field can take. |
| * <p> |
| * For example, the ISO day-of-month runs to between 28 and 31 days. |
| * The maximum is therefore 31. |
| * |
| * @return the maximum value for this field |
| */ |
| public long getMaximum() { |
| return maxLargest; |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Checks if all values in the range fit in an {@code int}. |
| * <p> |
| * This checks that all valid values are within the bounds of an {@code int}. |
| * <p> |
| * For example, the ISO month-of-year has values from 1 to 12, which fits in an {@code int}. |
| * By comparison, ISO nano-of-day runs from 1 to 86,400,000,000,000 which does not fit in an {@code int}. |
| * <p> |
| * This implementation uses {@link #getMinimum()} and {@link #getMaximum()}. |
| * |
| * @return true if a valid value always fits in an {@code int} |
| */ |
| public boolean isIntValue() { |
| return getMinimum() >= Integer.MIN_VALUE && getMaximum() <= Integer.MAX_VALUE; |
| } |
| |
| /** |
| * Checks if the value is within the valid range. |
| * <p> |
| * This checks that the value is within the stored range of values. |
| * |
| * @param value the value to check |
| * @return true if the value is valid |
| */ |
| public boolean isValidValue(long value) { |
| return (value >= getMinimum() && value <= getMaximum()); |
| } |
| |
| /** |
| * Checks if the value is within the valid range and that all values |
| * in the range fit in an {@code int}. |
| * <p> |
| * This method combines {@link #isIntValue()} and {@link #isValidValue(long)}. |
| * |
| * @param value the value to check |
| * @return true if the value is valid and fits in an {@code int} |
| */ |
| public boolean isValidIntValue(long value) { |
| return isIntValue() && isValidValue(value); |
| } |
| |
| /** |
| * Checks that the specified value is valid. |
| * <p> |
| * This validates that the value is within the valid range of values. |
| * The field is only used to improve the error message. |
| * |
| * @param value the value to check |
| * @param field the field being checked, may be null |
| * @return the value that was passed in |
| * @see #isValidValue(long) |
| */ |
| public long checkValidValue(long value, TemporalField field) { |
| if (isValidValue(value) == false) { |
| throw new DateTimeException(genInvalidFieldMessage(field, value)); |
| } |
| return value; |
| } |
| |
| /** |
| * Checks that the specified value is valid and fits in an {@code int}. |
| * <p> |
| * This validates that the value is within the valid range of values and that |
| * all valid values are within the bounds of an {@code int}. |
| * The field is only used to improve the error message. |
| * |
| * @param value the value to check |
| * @param field the field being checked, may be null |
| * @return the value that was passed in |
| * @see #isValidIntValue(long) |
| */ |
| public int checkValidIntValue(long value, TemporalField field) { |
| if (isValidIntValue(value) == false) { |
| throw new DateTimeException(genInvalidFieldMessage(field, value)); |
| } |
| return (int) value; |
| } |
| |
| private String genInvalidFieldMessage(TemporalField field, long value) { |
| if (field != null) { |
| return "Invalid value for " + field + " (valid values " + this + "): " + value; |
| } else { |
| return "Invalid value (valid values " + this + "): " + value; |
| } |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Restore the state of an ValueRange from the stream. |
| * Check that the values are valid. |
| * @throws InvalidObjectException if |
| * the smallest minimum is greater than the smallest maximum, |
| * or the smallest maximum is greater than the largest maximum |
| * or the largest minimum is greater than the largest maximum |
| */ |
| private void readObject(ObjectInputStream s) |
| throws IOException, ClassNotFoundException, InvalidObjectException |
| { |
| s.defaultReadObject(); |
| if (minSmallest > minLargest) { |
| throw new InvalidObjectException("Smallest minimum value must be less than largest minimum value"); |
| } |
| if (maxSmallest > maxLargest) { |
| throw new InvalidObjectException("Smallest maximum value must be less than largest maximum value"); |
| } |
| if (minLargest > maxLargest) { |
| throw new InvalidObjectException("Minimum value must be less than maximum value"); |
| } |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Checks if this range is equal to another range. |
| * <p> |
| * The comparison is based on the four values, minimum, largest minimum, |
| * smallest maximum and maximum. |
| * Only objects of type {@code ValueRange} are compared, other types return false. |
| * |
| * @param obj the object to check, null returns false |
| * @return true if this is equal to the other range |
| */ |
| @Override |
| public boolean equals(Object obj) { |
| if (obj == this) { |
| return true; |
| } |
| if (obj instanceof ValueRange) { |
| ValueRange other = (ValueRange) obj; |
| return minSmallest == other.minSmallest && minLargest == other.minLargest && |
| maxSmallest == other.maxSmallest && maxLargest == other.maxLargest; |
| } |
| return false; |
| } |
| |
| /** |
| * A hash code for this range. |
| * |
| * @return a suitable hash code |
| */ |
| @Override |
| public int hashCode() { |
| long hash = minSmallest + minLargest << 16 + minLargest >> 48 + maxSmallest << 32 + |
| maxSmallest >> 32 + maxLargest << 48 + maxLargest >> 16; |
| return (int) (hash ^ (hash >>> 32)); |
| } |
| |
| //----------------------------------------------------------------------- |
| /** |
| * Outputs this range as a {@code String}. |
| * <p> |
| * The format will be '{min}/{largestMin} - {smallestMax}/{max}', |
| * where the largestMin or smallestMax sections may be omitted, together |
| * with associated slash, if they are the same as the min or max. |
| * |
| * @return a string representation of this range, not null |
| */ |
| @Override |
| public String toString() { |
| StringBuilder buf = new StringBuilder(); |
| buf.append(minSmallest); |
| if (minSmallest != minLargest) { |
| buf.append('/').append(minLargest); |
| } |
| buf.append(" - ").append(maxSmallest); |
| if (maxSmallest != maxLargest) { |
| buf.append('/').append(maxLargest); |
| } |
| return buf.toString(); |
| } |
| |
| } |
