| /* |
| * Copyright 2003-2008 Sun Microsystems, Inc. All Rights Reserved. |
| * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
| * |
| * This code is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 only, as |
| * published by the Free Software Foundation. |
| * |
| * This code is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * version 2 for more details (a copy is included in the LICENSE file that |
| * accompanied this code). |
| * |
| * You should have received a copy of the GNU General Public License version |
| * 2 along with this work; if not, write to the Free Software Foundation, |
| * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. |
| * |
| * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, |
| * CA 95054 USA or visit www.sun.com if you need additional information or |
| * have any questions. |
| * |
| */ |
| |
| #include "incls/_precompiled.incl" |
| #include "incls/_interpreter_x86_64.cpp.incl" |
| |
| #define __ _masm-> |
| |
| const int method_offset = frame::interpreter_frame_method_offset * wordSize; |
| const int bci_offset = frame::interpreter_frame_bcx_offset * wordSize; |
| const int locals_offset = frame::interpreter_frame_locals_offset * wordSize; |
| |
| //----------------------------------------------------------------------------- |
| |
| address TemplateInterpreterGenerator::generate_StackOverflowError_handler() { |
| address entry = __ pc(); |
| |
| #ifdef ASSERT |
| { |
| Label L; |
| __ leaq(rax, Address(rbp, |
| frame::interpreter_frame_monitor_block_top_offset * |
| wordSize)); |
| __ cmpq(rax, rsp); // rax = maximal rsp for current rbp (stack |
| // grows negative) |
| __ jcc(Assembler::aboveEqual, L); // check if frame is complete |
| __ stop ("interpreter frame not set up"); |
| __ bind(L); |
| } |
| #endif // ASSERT |
| // Restore bcp under the assumption that the current frame is still |
| // interpreted |
| __ restore_bcp(); |
| |
| // expression stack must be empty before entering the VM if an |
| // exception happened |
| __ empty_expression_stack(); |
| // throw exception |
| __ call_VM(noreg, |
| CAST_FROM_FN_PTR(address, |
| InterpreterRuntime::throw_StackOverflowError)); |
| return entry; |
| } |
| |
| address TemplateInterpreterGenerator::generate_ArrayIndexOutOfBounds_handler( |
| const char* name) { |
| address entry = __ pc(); |
| // expression stack must be empty before entering the VM if an |
| // exception happened |
| __ empty_expression_stack(); |
| // setup parameters |
| // ??? convention: expect aberrant index in register ebx |
| __ lea(c_rarg1, ExternalAddress((address)name)); |
| __ call_VM(noreg, |
| CAST_FROM_FN_PTR(address, |
| InterpreterRuntime:: |
| throw_ArrayIndexOutOfBoundsException), |
| c_rarg1, rbx); |
| return entry; |
| } |
| |
| address TemplateInterpreterGenerator::generate_ClassCastException_handler() { |
| address entry = __ pc(); |
| |
| // object is at TOS |
| __ popq(c_rarg1); |
| |
| // expression stack must be empty before entering the VM if an |
| // exception happened |
| __ empty_expression_stack(); |
| |
| __ call_VM(noreg, |
| CAST_FROM_FN_PTR(address, |
| InterpreterRuntime:: |
| throw_ClassCastException), |
| c_rarg1); |
| return entry; |
| } |
| |
| address TemplateInterpreterGenerator::generate_exception_handler_common( |
| const char* name, const char* message, bool pass_oop) { |
| assert(!pass_oop || message == NULL, "either oop or message but not both"); |
| address entry = __ pc(); |
| if (pass_oop) { |
| // object is at TOS |
| __ popq(c_rarg2); |
| } |
| // expression stack must be empty before entering the VM if an |
| // exception happened |
| __ empty_expression_stack(); |
| // setup parameters |
| __ lea(c_rarg1, ExternalAddress((address)name)); |
| if (pass_oop) { |
| __ call_VM(rax, CAST_FROM_FN_PTR(address, |
| InterpreterRuntime:: |
| create_klass_exception), |
| c_rarg1, c_rarg2); |
| } else { |
| // kind of lame ExternalAddress can't take NULL because |
| // external_word_Relocation will assert. |
| if (message != NULL) { |
| __ lea(c_rarg2, ExternalAddress((address)message)); |
| } else { |
| __ movptr(c_rarg2, NULL_WORD); |
| } |
| __ call_VM(rax, |
| CAST_FROM_FN_PTR(address, InterpreterRuntime::create_exception), |
| c_rarg1, c_rarg2); |
| } |
| // throw exception |
| __ jump(ExternalAddress(Interpreter::throw_exception_entry())); |
| return entry; |
| } |
| |
| |
| address TemplateInterpreterGenerator::generate_continuation_for(TosState state) { |
| address entry = __ pc(); |
| // NULL last_sp until next java call |
| __ movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), NULL_WORD); |
| __ dispatch_next(state); |
| return entry; |
| } |
| |
| |
| address TemplateInterpreterGenerator::generate_return_entry_for(TosState state, |
| int step) { |
| |
| // amd64 doesn't need to do anything special about compiled returns |
| // to the interpreter so the code that exists on x86 to place a sentinel |
| // here and the specialized cleanup code is not needed here. |
| |
| address entry = __ pc(); |
| |
| // Restore stack bottom in case i2c adjusted stack |
| __ movq(rsp, Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize)); |
| // and NULL it as marker that esp is now tos until next java call |
| __ movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), NULL_WORD); |
| |
| __ restore_bcp(); |
| __ restore_locals(); |
| __ get_cache_and_index_at_bcp(rbx, rcx, 1); |
| __ movl(rbx, Address(rbx, rcx, |
| Address::times_8, |
| in_bytes(constantPoolCacheOopDesc::base_offset()) + |
| 3 * wordSize)); |
| __ andl(rbx, 0xFF); |
| if (TaggedStackInterpreter) __ shll(rbx, 1); // 2 slots per parameter. |
| __ leaq(rsp, Address(rsp, rbx, Address::times_8)); |
| __ dispatch_next(state, step); |
| return entry; |
| } |
| |
| |
| address TemplateInterpreterGenerator::generate_deopt_entry_for(TosState state, |
| int step) { |
| address entry = __ pc(); |
| // NULL last_sp until next java call |
| __ movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), NULL_WORD); |
| __ restore_bcp(); |
| __ restore_locals(); |
| // handle exceptions |
| { |
| Label L; |
| __ cmpq(Address(r15_thread, Thread::pending_exception_offset()), (int) NULL); |
| __ jcc(Assembler::zero, L); |
| __ call_VM(noreg, |
| CAST_FROM_FN_PTR(address, |
| InterpreterRuntime::throw_pending_exception)); |
| __ should_not_reach_here(); |
| __ bind(L); |
| } |
| __ dispatch_next(state, step); |
| return entry; |
| } |
| |
| int AbstractInterpreter::BasicType_as_index(BasicType type) { |
| int i = 0; |
| switch (type) { |
| case T_BOOLEAN: i = 0; break; |
| case T_CHAR : i = 1; break; |
| case T_BYTE : i = 2; break; |
| case T_SHORT : i = 3; break; |
| case T_INT : i = 4; break; |
| case T_LONG : i = 5; break; |
| case T_VOID : i = 6; break; |
| case T_FLOAT : i = 7; break; |
| case T_DOUBLE : i = 8; break; |
| case T_OBJECT : i = 9; break; |
| case T_ARRAY : i = 9; break; |
| default : ShouldNotReachHere(); |
| } |
| assert(0 <= i && i < AbstractInterpreter::number_of_result_handlers, |
| "index out of bounds"); |
| return i; |
| } |
| |
| |
| address TemplateInterpreterGenerator::generate_result_handler_for( |
| BasicType type) { |
| address entry = __ pc(); |
| switch (type) { |
| case T_BOOLEAN: __ c2bool(rax); break; |
| case T_CHAR : __ movzwl(rax, rax); break; |
| case T_BYTE : __ sign_extend_byte(rax); break; |
| case T_SHORT : __ sign_extend_short(rax); break; |
| case T_INT : /* nothing to do */ break; |
| case T_LONG : /* nothing to do */ break; |
| case T_VOID : /* nothing to do */ break; |
| case T_FLOAT : /* nothing to do */ break; |
| case T_DOUBLE : /* nothing to do */ break; |
| case T_OBJECT : |
| // retrieve result from frame |
| __ movq(rax, Address(rbp, frame::interpreter_frame_oop_temp_offset*wordSize)); |
| // and verify it |
| __ verify_oop(rax); |
| break; |
| default : ShouldNotReachHere(); |
| } |
| __ ret(0); // return from result handler |
| return entry; |
| } |
| |
| address TemplateInterpreterGenerator::generate_safept_entry_for( |
| TosState state, |
| address runtime_entry) { |
| address entry = __ pc(); |
| __ push(state); |
| __ call_VM(noreg, runtime_entry); |
| __ dispatch_via(vtos, Interpreter::_normal_table.table_for(vtos)); |
| return entry; |
| } |
| |
| |
| |
| // Helpers for commoning out cases in the various type of method entries. |
| // |
| |
| |
| // increment invocation count & check for overflow |
| // |
| // Note: checking for negative value instead of overflow |
| // so we have a 'sticky' overflow test |
| // |
| // rbx: method |
| // ecx: invocation counter |
| // |
| void InterpreterGenerator::generate_counter_incr( |
| Label* overflow, |
| Label* profile_method, |
| Label* profile_method_continue) { |
| |
| const Address invocation_counter(rbx, |
| methodOopDesc::invocation_counter_offset() + |
| InvocationCounter::counter_offset()); |
| const Address backedge_counter(rbx, |
| methodOopDesc::backedge_counter_offset() + |
| InvocationCounter::counter_offset()); |
| |
| if (ProfileInterpreter) { // %%% Merge this into methodDataOop |
| __ incrementl(Address(rbx, |
| methodOopDesc::interpreter_invocation_counter_offset())); |
| } |
| // Update standard invocation counters |
| __ movl(rax, backedge_counter); // load backedge counter |
| |
| __ incrementl(rcx, InvocationCounter::count_increment); |
| __ andl(rax, InvocationCounter::count_mask_value); // mask out the |
| // status bits |
| |
| __ movl(invocation_counter, rcx); // save invocation count |
| __ addl(rcx, rax); // add both counters |
| |
| // profile_method is non-null only for interpreted method so |
| // profile_method != NULL == !native_call |
| |
| if (ProfileInterpreter && profile_method != NULL) { |
| // Test to see if we should create a method data oop |
| __ cmp32(rcx, ExternalAddress((address)&InvocationCounter::InterpreterProfileLimit)); |
| __ jcc(Assembler::less, *profile_method_continue); |
| |
| // if no method data exists, go to profile_method |
| __ test_method_data_pointer(rax, *profile_method); |
| } |
| |
| __ cmp32(rcx, ExternalAddress((address)&InvocationCounter::InterpreterInvocationLimit)); |
| __ jcc(Assembler::aboveEqual, *overflow); |
| } |
| |
| void InterpreterGenerator::generate_counter_overflow(Label* do_continue) { |
| |
| // Asm interpreter on entry |
| // r14 - locals |
| // r13 - bcp |
| // rbx - method |
| // edx - cpool --- DOES NOT APPEAR TO BE TRUE |
| // rbp - interpreter frame |
| |
| // On return (i.e. jump to entry_point) [ back to invocation of interpreter ] |
| // Everything as it was on entry |
| // rdx is not restored. Doesn't appear to really be set. |
| |
| const Address size_of_parameters(rbx, |
| methodOopDesc::size_of_parameters_offset()); |
| |
| // InterpreterRuntime::frequency_counter_overflow takes two |
| // arguments, the first (thread) is passed by call_VM, the second |
| // indicates if the counter overflow occurs at a backwards branch |
| // (NULL bcp). We pass zero for it. The call returns the address |
| // of the verified entry point for the method or NULL if the |
| // compilation did not complete (either went background or bailed |
| // out). |
| __ movl(c_rarg1, 0); |
| __ call_VM(noreg, |
| CAST_FROM_FN_PTR(address, |
| InterpreterRuntime::frequency_counter_overflow), |
| c_rarg1); |
| |
| __ movq(rbx, Address(rbp, method_offset)); // restore methodOop |
| // Preserve invariant that r13/r14 contain bcp/locals of sender frame |
| // and jump to the interpreted entry. |
| __ jmp(*do_continue, relocInfo::none); |
| } |
| |
| // See if we've got enough room on the stack for locals plus overhead. |
| // The expression stack grows down incrementally, so the normal guard |
| // page mechanism will work for that. |
| // |
| // NOTE: Since the additional locals are also always pushed (wasn't |
| // obvious in generate_method_entry) so the guard should work for them |
| // too. |
| // |
| // Args: |
| // rdx: number of additional locals this frame needs (what we must check) |
| // rbx: methodOop |
| // |
| // Kills: |
| // rax |
| void InterpreterGenerator::generate_stack_overflow_check(void) { |
| |
| // monitor entry size: see picture of stack set |
| // (generate_method_entry) and frame_amd64.hpp |
| const int entry_size = frame::interpreter_frame_monitor_size() * wordSize; |
| |
| // total overhead size: entry_size + (saved rbp through expr stack |
| // bottom). be sure to change this if you add/subtract anything |
| // to/from the overhead area |
| const int overhead_size = |
| -(frame::interpreter_frame_initial_sp_offset * wordSize) + entry_size; |
| |
| const int page_size = os::vm_page_size(); |
| |
| Label after_frame_check; |
| |
| // see if the frame is greater than one page in size. If so, |
| // then we need to verify there is enough stack space remaining |
| // for the additional locals. |
| __ cmpl(rdx, (page_size - overhead_size) / Interpreter::stackElementSize()); |
| __ jcc(Assembler::belowEqual, after_frame_check); |
| |
| // compute rsp as if this were going to be the last frame on |
| // the stack before the red zone |
| |
| const Address stack_base(r15_thread, Thread::stack_base_offset()); |
| const Address stack_size(r15_thread, Thread::stack_size_offset()); |
| |
| // locals + overhead, in bytes |
| __ movq(rax, rdx); |
| __ shll(rax, Interpreter::logStackElementSize()); // 2 slots per parameter. |
| __ addq(rax, overhead_size); |
| |
| #ifdef ASSERT |
| Label stack_base_okay, stack_size_okay; |
| // verify that thread stack base is non-zero |
| __ cmpq(stack_base, 0); |
| __ jcc(Assembler::notEqual, stack_base_okay); |
| __ stop("stack base is zero"); |
| __ bind(stack_base_okay); |
| // verify that thread stack size is non-zero |
| __ cmpq(stack_size, 0); |
| __ jcc(Assembler::notEqual, stack_size_okay); |
| __ stop("stack size is zero"); |
| __ bind(stack_size_okay); |
| #endif |
| |
| // Add stack base to locals and subtract stack size |
| __ addq(rax, stack_base); |
| __ subq(rax, stack_size); |
| |
| // add in the red and yellow zone sizes |
| __ addq(rax, (StackRedPages + StackYellowPages) * page_size); |
| |
| // check against the current stack bottom |
| __ cmpq(rsp, rax); |
| __ jcc(Assembler::above, after_frame_check); |
| |
| __ popq(rax); // get return address |
| __ jump(ExternalAddress(Interpreter::throw_StackOverflowError_entry())); |
| |
| // all done with frame size check |
| __ bind(after_frame_check); |
| } |
| |
| // Allocate monitor and lock method (asm interpreter) |
| // |
| // Args: |
| // rbx: methodOop |
| // r14: locals |
| // |
| // Kills: |
| // rax |
| // c_rarg0, c_rarg1, c_rarg2, c_rarg3, ...(param regs) |
| // rscratch1, rscratch2 (scratch regs) |
| void InterpreterGenerator::lock_method(void) { |
| // synchronize method |
| const Address access_flags(rbx, methodOopDesc::access_flags_offset()); |
| const Address monitor_block_top( |
| rbp, |
| frame::interpreter_frame_monitor_block_top_offset * wordSize); |
| const int entry_size = frame::interpreter_frame_monitor_size() * wordSize; |
| |
| #ifdef ASSERT |
| { |
| Label L; |
| __ movl(rax, access_flags); |
| __ testl(rax, JVM_ACC_SYNCHRONIZED); |
| __ jcc(Assembler::notZero, L); |
| __ stop("method doesn't need synchronization"); |
| __ bind(L); |
| } |
| #endif // ASSERT |
| |
| // get synchronization object |
| { |
| const int mirror_offset = klassOopDesc::klass_part_offset_in_bytes() + |
| Klass::java_mirror_offset_in_bytes(); |
| Label done; |
| __ movl(rax, access_flags); |
| __ testl(rax, JVM_ACC_STATIC); |
| // get receiver (assume this is frequent case) |
| __ movq(rax, Address(r14, Interpreter::local_offset_in_bytes(0))); |
| __ jcc(Assembler::zero, done); |
| __ movq(rax, Address(rbx, methodOopDesc::constants_offset())); |
| __ movq(rax, Address(rax, |
| constantPoolOopDesc::pool_holder_offset_in_bytes())); |
| __ movq(rax, Address(rax, mirror_offset)); |
| |
| #ifdef ASSERT |
| { |
| Label L; |
| __ testq(rax, rax); |
| __ jcc(Assembler::notZero, L); |
| __ stop("synchronization object is NULL"); |
| __ bind(L); |
| } |
| #endif // ASSERT |
| |
| __ bind(done); |
| } |
| |
| // add space for monitor & lock |
| __ subq(rsp, entry_size); // add space for a monitor entry |
| __ movq(monitor_block_top, rsp); // set new monitor block top |
| // store object |
| __ movq(Address(rsp, BasicObjectLock::obj_offset_in_bytes()), rax); |
| __ movq(c_rarg1, rsp); // object address |
| __ lock_object(c_rarg1); |
| } |
| |
| // Generate a fixed interpreter frame. This is identical setup for |
| // interpreted methods and for native methods hence the shared code. |
| // |
| // Args: |
| // rax: return address |
| // rbx: methodOop |
| // r14: pointer to locals |
| // r13: sender sp |
| // rdx: cp cache |
| void TemplateInterpreterGenerator::generate_fixed_frame(bool native_call) { |
| // initialize fixed part of activation frame |
| __ pushq(rax); // save return address |
| __ enter(); // save old & set new rbp |
| __ pushq(r13); // set sender sp |
| __ pushq((int)NULL_WORD); // leave last_sp as null |
| __ movq(r13, Address(rbx, methodOopDesc::const_offset())); // get constMethodOop |
| __ leaq(r13, Address(r13, constMethodOopDesc::codes_offset())); // get codebase |
| __ pushq(rbx); // save methodOop |
| if (ProfileInterpreter) { |
| Label method_data_continue; |
| __ movq(rdx, Address(rbx, in_bytes(methodOopDesc::method_data_offset()))); |
| __ testq(rdx, rdx); |
| __ jcc(Assembler::zero, method_data_continue); |
| __ addq(rdx, in_bytes(methodDataOopDesc::data_offset())); |
| __ bind(method_data_continue); |
| __ pushq(rdx); // set the mdp (method data pointer) |
| } else { |
| __ pushq(0); |
| } |
| |
| __ movq(rdx, Address(rbx, methodOopDesc::constants_offset())); |
| __ movq(rdx, Address(rdx, constantPoolOopDesc::cache_offset_in_bytes())); |
| __ pushq(rdx); // set constant pool cache |
| __ pushq(r14); // set locals pointer |
| if (native_call) { |
| __ pushq(0); // no bcp |
| } else { |
| __ pushq(r13); // set bcp |
| } |
| __ pushq(0); // reserve word for pointer to expression stack bottom |
| __ movq(Address(rsp, 0), rsp); // set expression stack bottom |
| } |
| |
| // End of helpers |
| |
| // Interpreter stub for calling a native method. (asm interpreter) |
| // This sets up a somewhat different looking stack for calling the |
| // native method than the typical interpreter frame setup. |
| address InterpreterGenerator::generate_native_entry(bool synchronized) { |
| // determine code generation flags |
| bool inc_counter = UseCompiler || CountCompiledCalls; |
| |
| // rbx: methodOop |
| // r13: sender sp |
| |
| address entry_point = __ pc(); |
| |
| const Address size_of_parameters(rbx, methodOopDesc:: |
| size_of_parameters_offset()); |
| const Address invocation_counter(rbx, methodOopDesc:: |
| invocation_counter_offset() + |
| InvocationCounter::counter_offset()); |
| const Address access_flags (rbx, methodOopDesc::access_flags_offset()); |
| |
| // get parameter size (always needed) |
| __ load_unsigned_word(rcx, size_of_parameters); |
| |
| // native calls don't need the stack size check since they have no |
| // expression stack and the arguments are already on the stack and |
| // we only add a handful of words to the stack |
| |
| // rbx: methodOop |
| // rcx: size of parameters |
| // r13: sender sp |
| __ popq(rax); // get return address |
| |
| // for natives the size of locals is zero |
| |
| // compute beginning of parameters (r14) |
| if (TaggedStackInterpreter) __ shll(rcx, 1); // 2 slots per parameter. |
| __ leaq(r14, Address(rsp, rcx, Address::times_8, -wordSize)); |
| |
| // add 2 zero-initialized slots for native calls |
| // initialize result_handler slot |
| __ pushq((int) NULL); |
| // slot for oop temp |
| // (static native method holder mirror/jni oop result) |
| __ pushq((int) NULL); |
| |
| if (inc_counter) { |
| __ movl(rcx, invocation_counter); // (pre-)fetch invocation count |
| } |
| |
| // initialize fixed part of activation frame |
| generate_fixed_frame(true); |
| |
| // make sure method is native & not abstract |
| #ifdef ASSERT |
| __ movl(rax, access_flags); |
| { |
| Label L; |
| __ testl(rax, JVM_ACC_NATIVE); |
| __ jcc(Assembler::notZero, L); |
| __ stop("tried to execute non-native method as native"); |
| __ bind(L); |
| } |
| { |
| Label L; |
| __ testl(rax, JVM_ACC_ABSTRACT); |
| __ jcc(Assembler::zero, L); |
| __ stop("tried to execute abstract method in interpreter"); |
| __ bind(L); |
| } |
| #endif |
| |
| // Since at this point in the method invocation the exception handler |
| // would try to exit the monitor of synchronized methods which hasn't |
| // been entered yet, we set the thread local variable |
| // _do_not_unlock_if_synchronized to true. The remove_activation will |
| // check this flag. |
| |
| const Address do_not_unlock_if_synchronized(r15_thread, |
| in_bytes(JavaThread::do_not_unlock_if_synchronized_offset())); |
| __ movbool(do_not_unlock_if_synchronized, true); |
| |
| // increment invocation count & check for overflow |
| Label invocation_counter_overflow; |
| if (inc_counter) { |
| generate_counter_incr(&invocation_counter_overflow, NULL, NULL); |
| } |
| |
| Label continue_after_compile; |
| __ bind(continue_after_compile); |
| |
| bang_stack_shadow_pages(true); |
| |
| // reset the _do_not_unlock_if_synchronized flag |
| __ movbool(do_not_unlock_if_synchronized, false); |
| |
| // check for synchronized methods |
| // Must happen AFTER invocation_counter check and stack overflow check, |
| // so method is not locked if overflows. |
| if (synchronized) { |
| lock_method(); |
| } else { |
| // no synchronization necessary |
| #ifdef ASSERT |
| { |
| Label L; |
| __ movl(rax, access_flags); |
| __ testl(rax, JVM_ACC_SYNCHRONIZED); |
| __ jcc(Assembler::zero, L); |
| __ stop("method needs synchronization"); |
| __ bind(L); |
| } |
| #endif |
| } |
| |
| // start execution |
| #ifdef ASSERT |
| { |
| Label L; |
| const Address monitor_block_top(rbp, |
| frame::interpreter_frame_monitor_block_top_offset * wordSize); |
| __ movq(rax, monitor_block_top); |
| __ cmpq(rax, rsp); |
| __ jcc(Assembler::equal, L); |
| __ stop("broken stack frame setup in interpreter"); |
| __ bind(L); |
| } |
| #endif |
| |
| // jvmti support |
| __ notify_method_entry(); |
| |
| // work registers |
| const Register method = rbx; |
| const Register t = r11; |
| |
| // allocate space for parameters |
| __ get_method(method); |
| __ verify_oop(method); |
| __ load_unsigned_word(t, |
| Address(method, |
| methodOopDesc::size_of_parameters_offset())); |
| __ shll(t, Interpreter::logStackElementSize()); |
| |
| __ subq(rsp, t); |
| __ subq(rsp, frame::arg_reg_save_area_bytes); // windows |
| __ andq(rsp, -16); // must be 16 byte boundry (see amd64 ABI) |
| |
| // get signature handler |
| { |
| Label L; |
| __ movq(t, Address(method, methodOopDesc::signature_handler_offset())); |
| __ testq(t, t); |
| __ jcc(Assembler::notZero, L); |
| __ call_VM(noreg, |
| CAST_FROM_FN_PTR(address, |
| InterpreterRuntime::prepare_native_call), |
| method); |
| __ get_method(method); |
| __ movq(t, Address(method, methodOopDesc::signature_handler_offset())); |
| __ bind(L); |
| } |
| |
| // call signature handler |
| assert(InterpreterRuntime::SignatureHandlerGenerator::from() == r14, |
| "adjust this code"); |
| assert(InterpreterRuntime::SignatureHandlerGenerator::to() == rsp, |
| "adjust this code"); |
| assert(InterpreterRuntime::SignatureHandlerGenerator::temp() == rscratch1, |
| "adjust this code"); |
| |
| // The generated handlers do not touch RBX (the method oop). |
| // However, large signatures cannot be cached and are generated |
| // each time here. The slow-path generator can do a GC on return, |
| // so we must reload it after the call. |
| __ call(t); |
| __ get_method(method); // slow path can do a GC, reload RBX |
| |
| |
| // result handler is in rax |
| // set result handler |
| __ movq(Address(rbp, |
| (frame::interpreter_frame_result_handler_offset) * wordSize), |
| rax); |
| |
| // pass mirror handle if static call |
| { |
| Label L; |
| const int mirror_offset = klassOopDesc::klass_part_offset_in_bytes() + |
| Klass::java_mirror_offset_in_bytes(); |
| __ movl(t, Address(method, methodOopDesc::access_flags_offset())); |
| __ testl(t, JVM_ACC_STATIC); |
| __ jcc(Assembler::zero, L); |
| // get mirror |
| __ movq(t, Address(method, methodOopDesc::constants_offset())); |
| __ movq(t, Address(t, constantPoolOopDesc::pool_holder_offset_in_bytes())); |
| __ movq(t, Address(t, mirror_offset)); |
| // copy mirror into activation frame |
| __ movq(Address(rbp, frame::interpreter_frame_oop_temp_offset * wordSize), |
| t); |
| // pass handle to mirror |
| __ leaq(c_rarg1, |
| Address(rbp, frame::interpreter_frame_oop_temp_offset * wordSize)); |
| __ bind(L); |
| } |
| |
| // get native function entry point |
| { |
| Label L; |
| __ movq(rax, Address(method, methodOopDesc::native_function_offset())); |
| ExternalAddress unsatisfied(SharedRuntime::native_method_throw_unsatisfied_link_error_entry()); |
| __ movptr(rscratch2, unsatisfied.addr()); |
| __ cmpq(rax, rscratch2); |
| __ jcc(Assembler::notEqual, L); |
| __ call_VM(noreg, |
| CAST_FROM_FN_PTR(address, |
| InterpreterRuntime::prepare_native_call), |
| method); |
| __ get_method(method); |
| __ verify_oop(method); |
| __ movq(rax, Address(method, methodOopDesc::native_function_offset())); |
| __ bind(L); |
| } |
| |
| // pass JNIEnv |
| __ leaq(c_rarg0, Address(r15_thread, JavaThread::jni_environment_offset())); |
| |
| // It is enough that the pc() points into the right code |
| // segment. It does not have to be the correct return pc. |
| __ set_last_Java_frame(rsp, rbp, (address) __ pc()); |
| |
| // change thread state |
| #ifdef ASSERT |
| { |
| Label L; |
| __ movl(t, Address(r15_thread, JavaThread::thread_state_offset())); |
| __ cmpl(t, _thread_in_Java); |
| __ jcc(Assembler::equal, L); |
| __ stop("Wrong thread state in native stub"); |
| __ bind(L); |
| } |
| #endif |
| |
| // Change state to native |
| |
| __ movl(Address(r15_thread, JavaThread::thread_state_offset()), |
| _thread_in_native); |
| |
| // Call the native method. |
| __ call(rax); |
| // result potentially in rax or xmm0 |
| |
| // Depending on runtime options, either restore the MXCSR |
| // register after returning from the JNI Call or verify that |
| // it wasn't changed during -Xcheck:jni. |
| if (RestoreMXCSROnJNICalls) { |
| __ ldmxcsr(ExternalAddress(StubRoutines::amd64::mxcsr_std())); |
| } |
| else if (CheckJNICalls) { |
| __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, StubRoutines::amd64::verify_mxcsr_entry()))); |
| } |
| |
| // NOTE: The order of these pushes is known to frame::interpreter_frame_result |
| // in order to extract the result of a method call. If the order of these |
| // pushes change or anything else is added to the stack then the code in |
| // interpreter_frame_result must also change. |
| |
| __ push(dtos); |
| __ push(ltos); |
| |
| // change thread state |
| __ movl(Address(r15_thread, JavaThread::thread_state_offset()), |
| _thread_in_native_trans); |
| |
| if (os::is_MP()) { |
| if (UseMembar) { |
| // Force this write out before the read below |
| __ membar(Assembler::Membar_mask_bits( |
| Assembler::LoadLoad | Assembler::LoadStore | |
| Assembler::StoreLoad | Assembler::StoreStore)); |
| } else { |
| // Write serialization page so VM thread can do a pseudo remote membar. |
| // We use the current thread pointer to calculate a thread specific |
| // offset to write to within the page. This minimizes bus traffic |
| // due to cache line collision. |
| __ serialize_memory(r15_thread, rscratch2); |
| } |
| } |
| |
| // check for safepoint operation in progress and/or pending suspend requests |
| { |
| Label Continue; |
| __ cmp32(ExternalAddress(SafepointSynchronize::address_of_state()), |
| SafepointSynchronize::_not_synchronized); |
| |
| Label L; |
| __ jcc(Assembler::notEqual, L); |
| __ cmpl(Address(r15_thread, JavaThread::suspend_flags_offset()), 0); |
| __ jcc(Assembler::equal, Continue); |
| __ bind(L); |
| |
| // Don't use call_VM as it will see a possible pending exception |
| // and forward it and never return here preventing us from |
| // clearing _last_native_pc down below. Also can't use |
| // call_VM_leaf either as it will check to see if r13 & r14 are |
| // preserved and correspond to the bcp/locals pointers. So we do a |
| // runtime call by hand. |
| // |
| __ movq(c_rarg0, r15_thread); |
| __ movq(r12, rsp); // remember sp |
| __ subq(rsp, frame::arg_reg_save_area_bytes); // windows |
| __ andq(rsp, -16); // align stack as required by ABI |
| __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, JavaThread::check_special_condition_for_native_trans))); |
| __ movq(rsp, r12); // restore sp |
| __ reinit_heapbase(); |
| __ bind(Continue); |
| } |
| |
| // change thread state |
| __ movl(Address(r15_thread, JavaThread::thread_state_offset()), _thread_in_Java); |
| |
| // reset_last_Java_frame |
| __ reset_last_Java_frame(true, true); |
| |
| // reset handle block |
| __ movq(t, Address(r15_thread, JavaThread::active_handles_offset())); |
| __ movptr(Address(t, JNIHandleBlock::top_offset_in_bytes()), NULL_WORD); |
| |
| // If result is an oop unbox and store it in frame where gc will see it |
| // and result handler will pick it up |
| |
| { |
| Label no_oop, store_result; |
| __ lea(t, ExternalAddress(AbstractInterpreter::result_handler(T_OBJECT))); |
| __ cmpq(t, Address(rbp, frame::interpreter_frame_result_handler_offset*wordSize)); |
| __ jcc(Assembler::notEqual, no_oop); |
| // retrieve result |
| __ pop(ltos); |
| __ testq(rax, rax); |
| __ jcc(Assembler::zero, store_result); |
| __ movq(rax, Address(rax, 0)); |
| __ bind(store_result); |
| __ movq(Address(rbp, frame::interpreter_frame_oop_temp_offset*wordSize), rax); |
| // keep stack depth as expected by pushing oop which will eventually be discarde |
| __ push(ltos); |
| __ bind(no_oop); |
| } |
| |
| |
| { |
| Label no_reguard; |
| __ cmpl(Address(r15_thread, JavaThread::stack_guard_state_offset()), |
| JavaThread::stack_guard_yellow_disabled); |
| __ jcc(Assembler::notEqual, no_reguard); |
| |
| __ pushaq(); // XXX only save smashed registers |
| __ movq(r12, rsp); // remember sp |
| __ subq(rsp, frame::arg_reg_save_area_bytes); // windows |
| __ andq(rsp, -16); // align stack as required by ABI |
| __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, SharedRuntime::reguard_yellow_pages))); |
| __ movq(rsp, r12); // restore sp |
| __ popaq(); // XXX only restore smashed registers |
| __ reinit_heapbase(); |
| |
| __ bind(no_reguard); |
| } |
| |
| |
| // The method register is junk from after the thread_in_native transition |
| // until here. Also can't call_VM until the bcp has been |
| // restored. Need bcp for throwing exception below so get it now. |
| __ get_method(method); |
| __ verify_oop(method); |
| |
| // restore r13 to have legal interpreter frame, i.e., bci == 0 <=> |
| // r13 == code_base() |
| __ movq(r13, Address(method, methodOopDesc::const_offset())); // get constMethodOop |
| __ leaq(r13, Address(r13, constMethodOopDesc::codes_offset())); // get codebase |
| // handle exceptions (exception handling will handle unlocking!) |
| { |
| Label L; |
| __ cmpq(Address(r15_thread, Thread::pending_exception_offset()), (int) NULL); |
| __ jcc(Assembler::zero, L); |
| // Note: At some point we may want to unify this with the code |
| // used in call_VM_base(); i.e., we should use the |
| // StubRoutines::forward_exception code. For now this doesn't work |
| // here because the rsp is not correctly set at this point. |
| __ MacroAssembler::call_VM(noreg, |
| CAST_FROM_FN_PTR(address, |
| InterpreterRuntime::throw_pending_exception)); |
| __ should_not_reach_here(); |
| __ bind(L); |
| } |
| |
| // do unlocking if necessary |
| { |
| Label L; |
| __ movl(t, Address(method, methodOopDesc::access_flags_offset())); |
| __ testl(t, JVM_ACC_SYNCHRONIZED); |
| __ jcc(Assembler::zero, L); |
| // the code below should be shared with interpreter macro |
| // assembler implementation |
| { |
| Label unlock; |
| // BasicObjectLock will be first in list, since this is a |
| // synchronized method. However, need to check that the object |
| // has not been unlocked by an explicit monitorexit bytecode. |
| const Address monitor(rbp, |
| (intptr_t)(frame::interpreter_frame_initial_sp_offset * |
| wordSize - sizeof(BasicObjectLock))); |
| |
| // monitor expect in c_rarg1 for slow unlock path |
| __ leaq(c_rarg1, monitor); // address of first monitor |
| |
| __ movq(t, Address(c_rarg1, BasicObjectLock::obj_offset_in_bytes())); |
| __ testq(t, t); |
| __ jcc(Assembler::notZero, unlock); |
| |
| // Entry already unlocked, need to throw exception |
| __ MacroAssembler::call_VM(noreg, |
| CAST_FROM_FN_PTR(address, |
| InterpreterRuntime::throw_illegal_monitor_state_exception)); |
| __ should_not_reach_here(); |
| |
| __ bind(unlock); |
| __ unlock_object(c_rarg1); |
| } |
| __ bind(L); |
| } |
| |
| // jvmti support |
| // Note: This must happen _after_ handling/throwing any exceptions since |
| // the exception handler code notifies the runtime of method exits |
| // too. If this happens before, method entry/exit notifications are |
| // not properly paired (was bug - gri 11/22/99). |
| __ notify_method_exit(vtos, InterpreterMacroAssembler::NotifyJVMTI); |
| |
| // restore potential result in edx:eax, call result handler to |
| // restore potential result in ST0 & handle result |
| |
| __ pop(ltos); |
| __ pop(dtos); |
| |
| __ movq(t, Address(rbp, |
| (frame::interpreter_frame_result_handler_offset) * wordSize)); |
| __ call(t); |
| |
| // remove activation |
| __ movq(t, Address(rbp, |
| frame::interpreter_frame_sender_sp_offset * |
| wordSize)); // get sender sp |
| __ leave(); // remove frame anchor |
| __ popq(rdi); // get return address |
| __ movq(rsp, t); // set sp to sender sp |
| __ jmp(rdi); |
| |
| if (inc_counter) { |
| // Handle overflow of counter and compile method |
| __ bind(invocation_counter_overflow); |
| generate_counter_overflow(&continue_after_compile); |
| } |
| |
| return entry_point; |
| } |
| |
| // |
| // Generic interpreted method entry to (asm) interpreter |
| // |
| address InterpreterGenerator::generate_normal_entry(bool synchronized) { |
| // determine code generation flags |
| bool inc_counter = UseCompiler || CountCompiledCalls; |
| |
| // ebx: methodOop |
| // r13: sender sp |
| address entry_point = __ pc(); |
| |
| const Address size_of_parameters(rbx, |
| methodOopDesc::size_of_parameters_offset()); |
| const Address size_of_locals(rbx, methodOopDesc::size_of_locals_offset()); |
| const Address invocation_counter(rbx, |
| methodOopDesc::invocation_counter_offset() + |
| InvocationCounter::counter_offset()); |
| const Address access_flags(rbx, methodOopDesc::access_flags_offset()); |
| |
| // get parameter size (always needed) |
| __ load_unsigned_word(rcx, size_of_parameters); |
| |
| // rbx: methodOop |
| // rcx: size of parameters |
| // r13: sender_sp (could differ from sp+wordSize if we were called via c2i ) |
| |
| __ load_unsigned_word(rdx, size_of_locals); // get size of locals in words |
| __ subl(rdx, rcx); // rdx = no. of additional locals |
| |
| // YYY |
| // __ incrementl(rdx); |
| // __ andl(rdx, -2); |
| |
| // see if we've got enough room on the stack for locals plus overhead. |
| generate_stack_overflow_check(); |
| |
| // get return address |
| __ popq(rax); |
| |
| // compute beginning of parameters (r14) |
| if (TaggedStackInterpreter) __ shll(rcx, 1); // 2 slots per parameter. |
| __ leaq(r14, Address(rsp, rcx, Address::times_8, -wordSize)); |
| |
| // rdx - # of additional locals |
| // allocate space for locals |
| // explicitly initialize locals |
| { |
| Label exit, loop; |
| __ testl(rdx, rdx); |
| __ jcc(Assembler::lessEqual, exit); // do nothing if rdx <= 0 |
| __ bind(loop); |
| if (TaggedStackInterpreter) __ pushq((int) NULL); // push tag |
| __ pushq((int) NULL); // initialize local variables |
| __ decrementl(rdx); // until everything initialized |
| __ jcc(Assembler::greater, loop); |
| __ bind(exit); |
| } |
| |
| // (pre-)fetch invocation count |
| if (inc_counter) { |
| __ movl(rcx, invocation_counter); |
| } |
| // initialize fixed part of activation frame |
| generate_fixed_frame(false); |
| |
| // make sure method is not native & not abstract |
| #ifdef ASSERT |
| __ movl(rax, access_flags); |
| { |
| Label L; |
| __ testl(rax, JVM_ACC_NATIVE); |
| __ jcc(Assembler::zero, L); |
| __ stop("tried to execute native method as non-native"); |
| __ bind(L); |
| } |
| { |
| Label L; |
| __ testl(rax, JVM_ACC_ABSTRACT); |
| __ jcc(Assembler::zero, L); |
| __ stop("tried to execute abstract method in interpreter"); |
| __ bind(L); |
| } |
| #endif |
| |
| // Since at this point in the method invocation the exception |
| // handler would try to exit the monitor of synchronized methods |
| // which hasn't been entered yet, we set the thread local variable |
| // _do_not_unlock_if_synchronized to true. The remove_activation |
| // will check this flag. |
| |
| const Address do_not_unlock_if_synchronized(r15_thread, |
| in_bytes(JavaThread::do_not_unlock_if_synchronized_offset())); |
| __ movbool(do_not_unlock_if_synchronized, true); |
| |
| // increment invocation count & check for overflow |
| Label invocation_counter_overflow; |
| Label profile_method; |
| Label profile_method_continue; |
| if (inc_counter) { |
| generate_counter_incr(&invocation_counter_overflow, |
| &profile_method, |
| &profile_method_continue); |
| if (ProfileInterpreter) { |
| __ bind(profile_method_continue); |
| } |
| } |
| |
| Label continue_after_compile; |
| __ bind(continue_after_compile); |
| |
| // check for synchronized interpreted methods |
| bang_stack_shadow_pages(false); |
| |
| // reset the _do_not_unlock_if_synchronized flag |
| __ movbool(do_not_unlock_if_synchronized, false); |
| |
| // check for synchronized methods |
| // Must happen AFTER invocation_counter check and stack overflow check, |
| // so method is not locked if overflows. |
| if (synchronized) { |
| // Allocate monitor and lock method |
| lock_method(); |
| } else { |
| // no synchronization necessary |
| #ifdef ASSERT |
| { |
| Label L; |
| __ movl(rax, access_flags); |
| __ testl(rax, JVM_ACC_SYNCHRONIZED); |
| __ jcc(Assembler::zero, L); |
| __ stop("method needs synchronization"); |
| __ bind(L); |
| } |
| #endif |
| } |
| |
| // start execution |
| #ifdef ASSERT |
| { |
| Label L; |
| const Address monitor_block_top (rbp, |
| frame::interpreter_frame_monitor_block_top_offset * wordSize); |
| __ movq(rax, monitor_block_top); |
| __ cmpq(rax, rsp); |
| __ jcc(Assembler::equal, L); |
| __ stop("broken stack frame setup in interpreter"); |
| __ bind(L); |
| } |
| #endif |
| |
| // jvmti support |
| __ notify_method_entry(); |
| |
| __ dispatch_next(vtos); |
| |
| // invocation counter overflow |
| if (inc_counter) { |
| if (ProfileInterpreter) { |
| // We have decided to profile this method in the interpreter |
| __ bind(profile_method); |
| |
| __ call_VM(noreg, |
| CAST_FROM_FN_PTR(address, InterpreterRuntime::profile_method), |
| r13, true); |
| |
| __ movq(rbx, Address(rbp, method_offset)); // restore methodOop |
| __ movq(rax, Address(rbx, |
| in_bytes(methodOopDesc::method_data_offset()))); |
| __ movq(Address(rbp, frame::interpreter_frame_mdx_offset * wordSize), |
| rax); |
| __ test_method_data_pointer(rax, profile_method_continue); |
| __ addq(rax, in_bytes(methodDataOopDesc::data_offset())); |
| __ movq(Address(rbp, frame::interpreter_frame_mdx_offset * wordSize), |
| rax); |
| __ jmp(profile_method_continue); |
| } |
| // Handle overflow of counter and compile method |
| __ bind(invocation_counter_overflow); |
| generate_counter_overflow(&continue_after_compile); |
| } |
| |
| return entry_point; |
| } |
| |
| // Entry points |
| // |
| // Here we generate the various kind of entries into the interpreter. |
| // The two main entry type are generic bytecode methods and native |
| // call method. These both come in synchronized and non-synchronized |
| // versions but the frame layout they create is very similar. The |
| // other method entry types are really just special purpose entries |
| // that are really entry and interpretation all in one. These are for |
| // trivial methods like accessor, empty, or special math methods. |
| // |
| // When control flow reaches any of the entry types for the interpreter |
| // the following holds -> |
| // |
| // Arguments: |
| // |
| // rbx: methodOop |
| // |
| // Stack layout immediately at entry |
| // |
| // [ return address ] <--- rsp |
| // [ parameter n ] |
| // ... |
| // [ parameter 1 ] |
| // [ expression stack ] (caller's java expression stack) |
| |
| // Assuming that we don't go to one of the trivial specialized entries |
| // the stack will look like below when we are ready to execute the |
| // first bytecode (or call the native routine). The register usage |
| // will be as the template based interpreter expects (see |
| // interpreter_amd64.hpp). |
| // |
| // local variables follow incoming parameters immediately; i.e. |
| // the return address is moved to the end of the locals). |
| // |
| // [ monitor entry ] <--- rsp |
| // ... |
| // [ monitor entry ] |
| // [ expr. stack bottom ] |
| // [ saved r13 ] |
| // [ current r14 ] |
| // [ methodOop ] |
| // [ saved ebp ] <--- rbp |
| // [ return address ] |
| // [ local variable m ] |
| // ... |
| // [ local variable 1 ] |
| // [ parameter n ] |
| // ... |
| // [ parameter 1 ] <--- r14 |
| |
| address AbstractInterpreterGenerator::generate_method_entry( |
| AbstractInterpreter::MethodKind kind) { |
| // determine code generation flags |
| bool synchronized = false; |
| address entry_point = NULL; |
| |
| switch (kind) { |
| case Interpreter::zerolocals : break; |
| case Interpreter::zerolocals_synchronized: synchronized = true; break; |
| case Interpreter::native : entry_point = ((InterpreterGenerator*) this)->generate_native_entry(false); break; |
| case Interpreter::native_synchronized : entry_point = ((InterpreterGenerator*) this)->generate_native_entry(true); break; |
| case Interpreter::empty : entry_point = ((InterpreterGenerator*) this)->generate_empty_entry(); break; |
| case Interpreter::accessor : entry_point = ((InterpreterGenerator*) this)->generate_accessor_entry(); break; |
| case Interpreter::abstract : entry_point = ((InterpreterGenerator*) this)->generate_abstract_entry(); break; |
| case Interpreter::java_lang_math_sin : break; |
| case Interpreter::java_lang_math_cos : break; |
| case Interpreter::java_lang_math_tan : break; |
| case Interpreter::java_lang_math_abs : break; |
| case Interpreter::java_lang_math_log : break; |
| case Interpreter::java_lang_math_log10 : break; |
| case Interpreter::java_lang_math_sqrt : entry_point = ((InterpreterGenerator*) this)->generate_math_entry(kind); break; |
| default : ShouldNotReachHere(); break; |
| } |
| |
| if (entry_point) { |
| return entry_point; |
| } |
| |
| return ((InterpreterGenerator*) this)-> |
| generate_normal_entry(synchronized); |
| } |
| |
| // How much stack a method activation needs in words. |
| int AbstractInterpreter::size_top_interpreter_activation(methodOop method) { |
| const int entry_size = frame::interpreter_frame_monitor_size(); |
| |
| // total overhead size: entry_size + (saved rbp thru expr stack |
| // bottom). be sure to change this if you add/subtract anything |
| // to/from the overhead area |
| const int overhead_size = |
| -(frame::interpreter_frame_initial_sp_offset) + entry_size; |
| |
| const int stub_code = frame::entry_frame_after_call_words; |
| const int method_stack = (method->max_locals() + method->max_stack()) * |
| Interpreter::stackElementWords(); |
| return (overhead_size + method_stack + stub_code); |
| } |
| |
| int AbstractInterpreter::layout_activation(methodOop method, |
| int tempcount, |
| int popframe_extra_args, |
| int moncount, |
| int callee_param_count, |
| int callee_locals, |
| frame* caller, |
| frame* interpreter_frame, |
| bool is_top_frame) { |
| // Note: This calculation must exactly parallel the frame setup |
| // in AbstractInterpreterGenerator::generate_method_entry. |
| // If interpreter_frame!=NULL, set up the method, locals, and monitors. |
| // The frame interpreter_frame, if not NULL, is guaranteed to be the |
| // right size, as determined by a previous call to this method. |
| // It is also guaranteed to be walkable even though it is in a skeletal state |
| |
| // fixed size of an interpreter frame: |
| int max_locals = method->max_locals() * Interpreter::stackElementWords(); |
| int extra_locals = (method->max_locals() - method->size_of_parameters()) * |
| Interpreter::stackElementWords(); |
| |
| int overhead = frame::sender_sp_offset - |
| frame::interpreter_frame_initial_sp_offset; |
| // Our locals were accounted for by the caller (or last_frame_adjust |
| // on the transistion) Since the callee parameters already account |
| // for the callee's params we only need to account for the extra |
| // locals. |
| int size = overhead + |
| (callee_locals - callee_param_count)*Interpreter::stackElementWords() + |
| moncount * frame::interpreter_frame_monitor_size() + |
| tempcount* Interpreter::stackElementWords() + popframe_extra_args; |
| if (interpreter_frame != NULL) { |
| #ifdef ASSERT |
| assert(caller->unextended_sp() == interpreter_frame->interpreter_frame_sender_sp(), |
| "Frame not properly walkable"); |
| assert(caller->sp() == interpreter_frame->sender_sp(), "Frame not properly walkable(2)"); |
| #endif |
| |
| interpreter_frame->interpreter_frame_set_method(method); |
| // NOTE the difference in using sender_sp and |
| // interpreter_frame_sender_sp interpreter_frame_sender_sp is |
| // the original sp of the caller (the unextended_sp) and |
| // sender_sp is fp+16 XXX |
| intptr_t* locals = interpreter_frame->sender_sp() + max_locals - 1; |
| |
| interpreter_frame->interpreter_frame_set_locals(locals); |
| BasicObjectLock* montop = interpreter_frame->interpreter_frame_monitor_begin(); |
| BasicObjectLock* monbot = montop - moncount; |
| interpreter_frame->interpreter_frame_set_monitor_end(monbot); |
| |
| // Set last_sp |
| intptr_t* esp = (intptr_t*) monbot - |
| tempcount*Interpreter::stackElementWords() - |
| popframe_extra_args; |
| interpreter_frame->interpreter_frame_set_last_sp(esp); |
| |
| // All frames but the initial (oldest) interpreter frame we fill in have |
| // a value for sender_sp that allows walking the stack but isn't |
| // truly correct. Correct the value here. |
| if (extra_locals != 0 && |
| interpreter_frame->sender_sp() == |
| interpreter_frame->interpreter_frame_sender_sp()) { |
| interpreter_frame->set_interpreter_frame_sender_sp(caller->sp() + |
| extra_locals); |
| } |
| *interpreter_frame->interpreter_frame_cache_addr() = |
| method->constants()->cache(); |
| } |
| return size; |
| } |
| |
| //----------------------------------------------------------------------------- |
| // Exceptions |
| |
| void TemplateInterpreterGenerator::generate_throw_exception() { |
| // Entry point in previous activation (i.e., if the caller was |
| // interpreted) |
| Interpreter::_rethrow_exception_entry = __ pc(); |
| // Restore sp to interpreter_frame_last_sp even though we are going |
| // to empty the expression stack for the exception processing. |
| __ movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), NULL_WORD); |
| // rax: exception |
| // rdx: return address/pc that threw exception |
| __ restore_bcp(); // r13 points to call/send |
| __ restore_locals(); |
| __ reinit_heapbase(); // restore r12 as heapbase. |
| // Entry point for exceptions thrown within interpreter code |
| Interpreter::_throw_exception_entry = __ pc(); |
| // expression stack is undefined here |
| // rax: exception |
| // r13: exception bcp |
| __ verify_oop(rax); |
| __ movq(c_rarg1, rax); |
| |
| // expression stack must be empty before entering the VM in case of |
| // an exception |
| __ empty_expression_stack(); |
| // find exception handler address and preserve exception oop |
| __ call_VM(rdx, |
| CAST_FROM_FN_PTR(address, |
| InterpreterRuntime::exception_handler_for_exception), |
| c_rarg1); |
| // rax: exception handler entry point |
| // rdx: preserved exception oop |
| // r13: bcp for exception handler |
| __ push_ptr(rdx); // push exception which is now the only value on the stack |
| __ jmp(rax); // jump to exception handler (may be _remove_activation_entry!) |
| |
| // If the exception is not handled in the current frame the frame is |
| // removed and the exception is rethrown (i.e. exception |
| // continuation is _rethrow_exception). |
| // |
| // Note: At this point the bci is still the bxi for the instruction |
| // which caused the exception and the expression stack is |
| // empty. Thus, for any VM calls at this point, GC will find a legal |
| // oop map (with empty expression stack). |
| |
| // In current activation |
| // tos: exception |
| // esi: exception bcp |
| |
| // |
| // JVMTI PopFrame support |
| // |
| |
| Interpreter::_remove_activation_preserving_args_entry = __ pc(); |
| __ empty_expression_stack(); |
| // Set the popframe_processing bit in pending_popframe_condition |
| // indicating that we are currently handling popframe, so that |
| // call_VMs that may happen later do not trigger new popframe |
| // handling cycles. |
| __ movl(rdx, Address(r15_thread, JavaThread::popframe_condition_offset())); |
| __ orl(rdx, JavaThread::popframe_processing_bit); |
| __ movl(Address(r15_thread, JavaThread::popframe_condition_offset()), rdx); |
| |
| { |
| // Check to see whether we are returning to a deoptimized frame. |
| // (The PopFrame call ensures that the caller of the popped frame is |
| // either interpreted or compiled and deoptimizes it if compiled.) |
| // In this case, we can't call dispatch_next() after the frame is |
| // popped, but instead must save the incoming arguments and restore |
| // them after deoptimization has occurred. |
| // |
| // Note that we don't compare the return PC against the |
| // deoptimization blob's unpack entry because of the presence of |
| // adapter frames in C2. |
| Label caller_not_deoptimized; |
| __ movq(c_rarg1, Address(rbp, frame::return_addr_offset * wordSize)); |
| __ super_call_VM_leaf(CAST_FROM_FN_PTR(address, |
| InterpreterRuntime::interpreter_contains), c_rarg1); |
| __ testl(rax, rax); |
| __ jcc(Assembler::notZero, caller_not_deoptimized); |
| |
| // Compute size of arguments for saving when returning to |
| // deoptimized caller |
| __ get_method(rax); |
| __ load_unsigned_word(rax, Address(rax, in_bytes(methodOopDesc:: |
| size_of_parameters_offset()))); |
| __ shll(rax, Interpreter::logStackElementSize()); |
| __ restore_locals(); // XXX do we need this? |
| __ subq(r14, rax); |
| __ addq(r14, wordSize); |
| // Save these arguments |
| __ super_call_VM_leaf(CAST_FROM_FN_PTR(address, |
| Deoptimization:: |
| popframe_preserve_args), |
| r15_thread, rax, r14); |
| |
| __ remove_activation(vtos, rdx, |
| /* throw_monitor_exception */ false, |
| /* install_monitor_exception */ false, |
| /* notify_jvmdi */ false); |
| |
| // Inform deoptimization that it is responsible for restoring |
| // these arguments |
| __ movl(Address(r15_thread, JavaThread::popframe_condition_offset()), |
| JavaThread::popframe_force_deopt_reexecution_bit); |
| |
| // Continue in deoptimization handler |
| __ jmp(rdx); |
| |
| __ bind(caller_not_deoptimized); |
| } |
| |
| __ remove_activation(vtos, rdx, /* rdx result (retaddr) is not used */ |
| /* throw_monitor_exception */ false, |
| /* install_monitor_exception */ false, |
| /* notify_jvmdi */ false); |
| |
| // Finish with popframe handling |
| // A previous I2C followed by a deoptimization might have moved the |
| // outgoing arguments further up the stack. PopFrame expects the |
| // mutations to those outgoing arguments to be preserved and other |
| // constraints basically require this frame to look exactly as |
| // though it had previously invoked an interpreted activation with |
| // no space between the top of the expression stack (current |
| // last_sp) and the top of stack. Rather than force deopt to |
| // maintain this kind of invariant all the time we call a small |
| // fixup routine to move the mutated arguments onto the top of our |
| // expression stack if necessary. |
| __ movq(c_rarg1, rsp); |
| __ movq(c_rarg2, Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize)); |
| // PC must point into interpreter here |
| __ set_last_Java_frame(noreg, rbp, __ pc()); |
| __ super_call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::popframe_move_outgoing_args), r15_thread, c_rarg1, c_rarg2); |
| __ reset_last_Java_frame(true, true); |
| // Restore the last_sp and null it out |
| __ movq(rsp, Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize)); |
| __ movptr(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), NULL_WORD); |
| |
| __ restore_bcp(); // XXX do we need this? |
| __ restore_locals(); // XXX do we need this? |
| // The method data pointer was incremented already during |
| // call profiling. We have to restore the mdp for the current bcp. |
| if (ProfileInterpreter) { |
| __ set_method_data_pointer_for_bcp(); |
| } |
| |
| // Clear the popframe condition flag |
| __ movl(Address(r15_thread, JavaThread::popframe_condition_offset()), |
| JavaThread::popframe_inactive); |
| |
| __ dispatch_next(vtos); |
| // end of PopFrame support |
| |
| Interpreter::_remove_activation_entry = __ pc(); |
| |
| // preserve exception over this code sequence |
| __ pop_ptr(rax); |
| __ movq(Address(r15_thread, JavaThread::vm_result_offset()), rax); |
| // remove the activation (without doing throws on illegalMonitorExceptions) |
| __ remove_activation(vtos, rdx, false, true, false); |
| // restore exception |
| __ movq(rax, Address(r15_thread, JavaThread::vm_result_offset())); |
| __ movptr(Address(r15_thread, JavaThread::vm_result_offset()), NULL_WORD); |
| __ verify_oop(rax); |
| |
| // In between activations - previous activation type unknown yet |
| // compute continuation point - the continuation point expects the |
| // following registers set up: |
| // |
| // rax: exception |
| // rdx: return address/pc that threw exception |
| // rsp: expression stack of caller |
| // rbp: ebp of caller |
| __ pushq(rax); // save exception |
| __ pushq(rdx); // save return address |
| __ super_call_VM_leaf(CAST_FROM_FN_PTR(address, |
| SharedRuntime::exception_handler_for_return_address), |
| rdx); |
| __ movq(rbx, rax); // save exception handler |
| __ popq(rdx); // restore return address |
| __ popq(rax); // restore exception |
| // Note that an "issuing PC" is actually the next PC after the call |
| __ jmp(rbx); // jump to exception |
| // handler of caller |
| } |
| |
| |
| // |
| // JVMTI ForceEarlyReturn support |
| // |
| address TemplateInterpreterGenerator::generate_earlyret_entry_for(TosState state) { |
| address entry = __ pc(); |
| |
| __ restore_bcp(); |
| __ restore_locals(); |
| __ empty_expression_stack(); |
| __ load_earlyret_value(state); |
| |
| __ movq(rdx, Address(r15_thread, JavaThread::jvmti_thread_state_offset())); |
| Address cond_addr(rdx, JvmtiThreadState::earlyret_state_offset()); |
| |
| // Clear the earlyret state |
| __ movl(cond_addr, JvmtiThreadState::earlyret_inactive); |
| |
| __ remove_activation(state, rsi, |
| false, /* throw_monitor_exception */ |
| false, /* install_monitor_exception */ |
| true); /* notify_jvmdi */ |
| __ jmp(rsi); |
| |
| return entry; |
| } // end of ForceEarlyReturn support |
| |
| |
| //----------------------------------------------------------------------------- |
| // Helper for vtos entry point generation |
| |
| void TemplateInterpreterGenerator::set_vtos_entry_points(Template* t, |
| address& bep, |
| address& cep, |
| address& sep, |
| address& aep, |
| address& iep, |
| address& lep, |
| address& fep, |
| address& dep, |
| address& vep) { |
| assert(t->is_valid() && t->tos_in() == vtos, "illegal template"); |
| Label L; |
| aep = __ pc(); __ push_ptr(); __ jmp(L); |
| fep = __ pc(); __ push_f(); __ jmp(L); |
| dep = __ pc(); __ push_d(); __ jmp(L); |
| lep = __ pc(); __ push_l(); __ jmp(L); |
| bep = cep = sep = |
| iep = __ pc(); __ push_i(); |
| vep = __ pc(); |
| __ bind(L); |
| generate_and_dispatch(t); |
| } |
| |
| |
| //----------------------------------------------------------------------------- |
| // Generation of individual instructions |
| |
| // helpers for generate_and_dispatch |
| |
| |
| InterpreterGenerator::InterpreterGenerator(StubQueue* code) |
| : TemplateInterpreterGenerator(code) { |
| generate_all(); // down here so it can be "virtual" |
| } |
| |
| //----------------------------------------------------------------------------- |
| |
| // Non-product code |
| #ifndef PRODUCT |
| address TemplateInterpreterGenerator::generate_trace_code(TosState state) { |
| address entry = __ pc(); |
| |
| __ push(state); |
| __ pushq(c_rarg0); |
| __ pushq(c_rarg1); |
| __ pushq(c_rarg2); |
| __ pushq(c_rarg3); |
| __ movq(c_rarg2, rax); // Pass itos |
| #ifdef _WIN64 |
| __ movflt(xmm3, xmm0); // Pass ftos |
| #endif |
| __ call_VM(noreg, |
| CAST_FROM_FN_PTR(address, SharedRuntime::trace_bytecode), |
| c_rarg1, c_rarg2, c_rarg3); |
| __ popq(c_rarg3); |
| __ popq(c_rarg2); |
| __ popq(c_rarg1); |
| __ popq(c_rarg0); |
| __ pop(state); |
| __ ret(0); // return from result handler |
| |
| return entry; |
| } |
| |
| void TemplateInterpreterGenerator::count_bytecode() { |
| __ incrementl(ExternalAddress((address) &BytecodeCounter::_counter_value)); |
| } |
| |
| void TemplateInterpreterGenerator::histogram_bytecode(Template* t) { |
| __ incrementl(ExternalAddress((address) &BytecodeHistogram::_counters[t->bytecode()])); |
| } |
| |
| void TemplateInterpreterGenerator::histogram_bytecode_pair(Template* t) { |
| __ mov32(rbx, ExternalAddress((address) &BytecodePairHistogram::_index)); |
| __ shrl(rbx, BytecodePairHistogram::log2_number_of_codes); |
| __ orl(rbx, |
| ((int) t->bytecode()) << |
| BytecodePairHistogram::log2_number_of_codes); |
| __ mov32(ExternalAddress((address) &BytecodePairHistogram::_index), rbx); |
| __ lea(rscratch1, ExternalAddress((address) BytecodePairHistogram::_counters)); |
| __ incrementl(Address(rscratch1, rbx, Address::times_4)); |
| } |
| |
| |
| void TemplateInterpreterGenerator::trace_bytecode(Template* t) { |
| // Call a little run-time stub to avoid blow-up for each bytecode. |
| // The run-time runtime saves the right registers, depending on |
| // the tosca in-state for the given template. |
| |
| assert(Interpreter::trace_code(t->tos_in()) != NULL, |
| "entry must have been generated"); |
| __ movq(r12, rsp); // remember sp |
| __ andq(rsp, -16); // align stack as required by ABI |
| __ call(RuntimeAddress(Interpreter::trace_code(t->tos_in()))); |
| __ movq(rsp, r12); // restore sp |
| __ reinit_heapbase(); |
| } |
| |
| |
| void TemplateInterpreterGenerator::stop_interpreter_at() { |
| Label L; |
| __ cmp32(ExternalAddress((address) &BytecodeCounter::_counter_value), |
| StopInterpreterAt); |
| __ jcc(Assembler::notEqual, L); |
| __ int3(); |
| __ bind(L); |
| } |
| #endif // !PRODUCT |
