| /* |
| * Copyright 1997-2006 Sun Microsystems, Inc. All Rights Reserved. |
| * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
| * |
| * This code is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 only, as |
| * published by the Free Software Foundation. |
| * |
| * This code is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * version 2 for more details (a copy is included in the LICENSE file that |
| * accompanied this code). |
| * |
| * You should have received a copy of the GNU General Public License version |
| * 2 along with this work; if not, write to the Free Software Foundation, |
| * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. |
| * |
| * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, |
| * CA 95054 USA or visit www.sun.com if you need additional information or |
| * have any questions. |
| * |
| */ |
| |
| #include "incls/_precompiled.incl" |
| #include "incls/_assembler.cpp.incl" |
| |
| |
| // Implementation of AbstractAssembler |
| // |
| // The AbstractAssembler is generating code into a CodeBuffer. To make code generation faster, |
| // the assembler keeps a copy of the code buffers boundaries & modifies them when |
| // emitting bytes rather than using the code buffers accessor functions all the time. |
| // The code buffer is updated via set_code_end(...) after emiting a whole instruction. |
| |
| AbstractAssembler::AbstractAssembler(CodeBuffer* code) { |
| if (code == NULL) return; |
| CodeSection* cs = code->insts(); |
| cs->clear_mark(); // new assembler kills old mark |
| _code_section = cs; |
| _code_begin = cs->start(); |
| _code_limit = cs->limit(); |
| _code_pos = cs->end(); |
| _oop_recorder= code->oop_recorder(); |
| if (_code_begin == NULL) { |
| vm_exit_out_of_memory1(0, "CodeCache: no room for %s", code->name()); |
| } |
| } |
| |
| void AbstractAssembler::set_code_section(CodeSection* cs) { |
| assert(cs->outer() == code_section()->outer(), "sanity"); |
| assert(cs->is_allocated(), "need to pre-allocate this section"); |
| cs->clear_mark(); // new assembly into this section kills old mark |
| _code_section = cs; |
| _code_begin = cs->start(); |
| _code_limit = cs->limit(); |
| _code_pos = cs->end(); |
| } |
| |
| // Inform CodeBuffer that incoming code and relocation will be for stubs |
| address AbstractAssembler::start_a_stub(int required_space) { |
| CodeBuffer* cb = code(); |
| CodeSection* cs = cb->stubs(); |
| assert(_code_section == cb->insts(), "not in insts?"); |
| sync(); |
| if (cs->maybe_expand_to_ensure_remaining(required_space) |
| && cb->blob() == NULL) { |
| return NULL; |
| } |
| set_code_section(cs); |
| return pc(); |
| } |
| |
| // Inform CodeBuffer that incoming code and relocation will be code |
| // Should not be called if start_a_stub() returned NULL |
| void AbstractAssembler::end_a_stub() { |
| assert(_code_section == code()->stubs(), "not in stubs?"); |
| sync(); |
| set_code_section(code()->insts()); |
| } |
| |
| // Inform CodeBuffer that incoming code and relocation will be for stubs |
| address AbstractAssembler::start_a_const(int required_space, int required_align) { |
| CodeBuffer* cb = code(); |
| CodeSection* cs = cb->consts(); |
| assert(_code_section == cb->insts(), "not in insts?"); |
| sync(); |
| address end = cs->end(); |
| int pad = -(intptr_t)end & (required_align-1); |
| if (cs->maybe_expand_to_ensure_remaining(pad + required_space)) { |
| if (cb->blob() == NULL) return NULL; |
| end = cs->end(); // refresh pointer |
| } |
| if (pad > 0) { |
| while (--pad >= 0) { *end++ = 0; } |
| cs->set_end(end); |
| } |
| set_code_section(cs); |
| return end; |
| } |
| |
| // Inform CodeBuffer that incoming code and relocation will be code |
| // Should not be called if start_a_const() returned NULL |
| void AbstractAssembler::end_a_const() { |
| assert(_code_section == code()->consts(), "not in consts?"); |
| sync(); |
| set_code_section(code()->insts()); |
| } |
| |
| |
| void AbstractAssembler::flush() { |
| sync(); |
| ICache::invalidate_range(addr_at(0), offset()); |
| } |
| |
| |
| void AbstractAssembler::a_byte(int x) { |
| emit_byte(x); |
| } |
| |
| |
| void AbstractAssembler::a_long(jint x) { |
| emit_long(x); |
| } |
| |
| // Labels refer to positions in the (to be) generated code. There are bound |
| // and unbound |
| // |
| // Bound labels refer to known positions in the already generated code. |
| // offset() is the position the label refers to. |
| // |
| // Unbound labels refer to unknown positions in the code to be generated; it |
| // may contain a list of unresolved displacements that refer to it |
| #ifndef PRODUCT |
| void AbstractAssembler::print(Label& L) { |
| if (L.is_bound()) { |
| tty->print_cr("bound label to %d|%d", L.loc_pos(), L.loc_sect()); |
| } else if (L.is_unbound()) { |
| L.print_instructions((MacroAssembler*)this); |
| } else { |
| tty->print_cr("label in inconsistent state (loc = %d)", L.loc()); |
| } |
| } |
| #endif // PRODUCT |
| |
| |
| void AbstractAssembler::bind(Label& L) { |
| if (L.is_bound()) { |
| // Assembler can bind a label more than once to the same place. |
| guarantee(L.loc() == locator(), "attempt to redefine label"); |
| return; |
| } |
| L.bind_loc(locator()); |
| L.patch_instructions((MacroAssembler*)this); |
| } |
| |
| void AbstractAssembler::generate_stack_overflow_check( int frame_size_in_bytes) { |
| if (UseStackBanging) { |
| // Each code entry causes one stack bang n pages down the stack where n |
| // is configurable by StackBangPages. The setting depends on the maximum |
| // depth of VM call stack or native before going back into java code, |
| // since only java code can raise a stack overflow exception using the |
| // stack banging mechanism. The VM and native code does not detect stack |
| // overflow. |
| // The code in JavaCalls::call() checks that there is at least n pages |
| // available, so all entry code needs to do is bang once for the end of |
| // this shadow zone. |
| // The entry code may need to bang additional pages if the framesize |
| // is greater than a page. |
| |
| const int page_size = os::vm_page_size(); |
| int bang_end = StackShadowPages*page_size; |
| |
| // This is how far the previous frame's stack banging extended. |
| const int bang_end_safe = bang_end; |
| |
| if (frame_size_in_bytes > page_size) { |
| bang_end += frame_size_in_bytes; |
| } |
| |
| int bang_offset = bang_end_safe; |
| while (bang_offset <= bang_end) { |
| // Need at least one stack bang at end of shadow zone. |
| bang_stack_with_offset(bang_offset); |
| bang_offset += page_size; |
| } |
| } // end (UseStackBanging) |
| } |
| |
| void Label::add_patch_at(CodeBuffer* cb, int branch_loc) { |
| assert(_loc == -1, "Label is unbound"); |
| if (_patch_index < PatchCacheSize) { |
| _patches[_patch_index] = branch_loc; |
| } else { |
| if (_patch_overflow == NULL) { |
| _patch_overflow = cb->create_patch_overflow(); |
| } |
| _patch_overflow->push(branch_loc); |
| } |
| ++_patch_index; |
| } |
| |
| void Label::patch_instructions(MacroAssembler* masm) { |
| assert(is_bound(), "Label is bound"); |
| CodeBuffer* cb = masm->code(); |
| int target_sect = CodeBuffer::locator_sect(loc()); |
| address target = cb->locator_address(loc()); |
| while (_patch_index > 0) { |
| --_patch_index; |
| int branch_loc; |
| if (_patch_index >= PatchCacheSize) { |
| branch_loc = _patch_overflow->pop(); |
| } else { |
| branch_loc = _patches[_patch_index]; |
| } |
| int branch_sect = CodeBuffer::locator_sect(branch_loc); |
| address branch = cb->locator_address(branch_loc); |
| if (branch_sect == CodeBuffer::SECT_CONSTS) { |
| // The thing to patch is a constant word. |
| *(address*)branch = target; |
| continue; |
| } |
| |
| #ifdef ASSERT |
| // Cross-section branches only work if the |
| // intermediate section boundaries are frozen. |
| if (target_sect != branch_sect) { |
| for (int n = MIN2(target_sect, branch_sect), |
| nlimit = (target_sect + branch_sect) - n; |
| n < nlimit; n++) { |
| CodeSection* cs = cb->code_section(n); |
| assert(cs->is_frozen(), "cross-section branch needs stable offsets"); |
| } |
| } |
| #endif //ASSERT |
| |
| // Push the target offset into the branch instruction. |
| masm->pd_patch_instruction(branch, target); |
| } |
| } |
| |
| |
| void AbstractAssembler::block_comment(const char* comment) { |
| if (sect() == CodeBuffer::SECT_INSTS) { |
| code_section()->outer()->block_comment(offset(), comment); |
| } |
| } |
| |
| |
| #ifndef PRODUCT |
| void Label::print_instructions(MacroAssembler* masm) const { |
| CodeBuffer* cb = masm->code(); |
| for (int i = 0; i < _patch_index; ++i) { |
| int branch_loc; |
| if (i >= PatchCacheSize) { |
| branch_loc = _patch_overflow->at(i - PatchCacheSize); |
| } else { |
| branch_loc = _patches[i]; |
| } |
| int branch_pos = CodeBuffer::locator_pos(branch_loc); |
| int branch_sect = CodeBuffer::locator_sect(branch_loc); |
| address branch = cb->locator_address(branch_loc); |
| tty->print_cr("unbound label"); |
| tty->print("@ %d|%d ", branch_pos, branch_sect); |
| if (branch_sect == CodeBuffer::SECT_CONSTS) { |
| tty->print_cr(PTR_FORMAT, *(address*)branch); |
| continue; |
| } |
| masm->pd_print_patched_instruction(branch); |
| tty->cr(); |
| } |
| } |
| #endif // ndef PRODUCT |