| /* |
| * Copyright 2003-2007 Sun Microsystems, Inc. All Rights Reserved. |
| * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
| * |
| * This code is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 only, as |
| * published by the Free Software Foundation. |
| * |
| * This code is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * version 2 for more details (a copy is included in the LICENSE file that |
| * accompanied this code). |
| * |
| * You should have received a copy of the GNU General Public License version |
| * 2 along with this work; if not, write to the Free Software Foundation, |
| * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. |
| * |
| * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, |
| * CA 95054 USA or visit www.sun.com if you need additional information or |
| * have any questions. |
| * |
| */ |
| |
| #include "incls/_precompiled.incl" |
| #include "incls/_sharedRuntime_x86_32.cpp.incl" |
| |
| #define __ masm-> |
| #ifdef COMPILER2 |
| UncommonTrapBlob *SharedRuntime::_uncommon_trap_blob; |
| #endif // COMPILER2 |
| |
| DeoptimizationBlob *SharedRuntime::_deopt_blob; |
| SafepointBlob *SharedRuntime::_polling_page_safepoint_handler_blob; |
| SafepointBlob *SharedRuntime::_polling_page_return_handler_blob; |
| RuntimeStub* SharedRuntime::_wrong_method_blob; |
| RuntimeStub* SharedRuntime::_ic_miss_blob; |
| RuntimeStub* SharedRuntime::_resolve_opt_virtual_call_blob; |
| RuntimeStub* SharedRuntime::_resolve_virtual_call_blob; |
| RuntimeStub* SharedRuntime::_resolve_static_call_blob; |
| |
| class RegisterSaver { |
| enum { FPU_regs_live = 8 /*for the FPU stack*/+8/*eight more for XMM registers*/ }; |
| // Capture info about frame layout |
| enum layout { |
| fpu_state_off = 0, |
| fpu_state_end = fpu_state_off+FPUStateSizeInWords-1, |
| st0_off, st0H_off, |
| st1_off, st1H_off, |
| st2_off, st2H_off, |
| st3_off, st3H_off, |
| st4_off, st4H_off, |
| st5_off, st5H_off, |
| st6_off, st6H_off, |
| st7_off, st7H_off, |
| |
| xmm0_off, xmm0H_off, |
| xmm1_off, xmm1H_off, |
| xmm2_off, xmm2H_off, |
| xmm3_off, xmm3H_off, |
| xmm4_off, xmm4H_off, |
| xmm5_off, xmm5H_off, |
| xmm6_off, xmm6H_off, |
| xmm7_off, xmm7H_off, |
| flags_off, |
| rdi_off, |
| rsi_off, |
| ignore_off, // extra copy of rbp, |
| rsp_off, |
| rbx_off, |
| rdx_off, |
| rcx_off, |
| rax_off, |
| // The frame sender code expects that rbp will be in the "natural" place and |
| // will override any oopMap setting for it. We must therefore force the layout |
| // so that it agrees with the frame sender code. |
| rbp_off, |
| return_off, // slot for return address |
| reg_save_size }; |
| |
| |
| public: |
| |
| static OopMap* save_live_registers(MacroAssembler* masm, int additional_frame_words, |
| int* total_frame_words, bool verify_fpu = true); |
| static void restore_live_registers(MacroAssembler* masm); |
| |
| static int rax_offset() { return rax_off; } |
| static int rbx_offset() { return rbx_off; } |
| |
| // Offsets into the register save area |
| // Used by deoptimization when it is managing result register |
| // values on its own |
| |
| static int raxOffset(void) { return rax_off; } |
| static int rdxOffset(void) { return rdx_off; } |
| static int rbxOffset(void) { return rbx_off; } |
| static int xmm0Offset(void) { return xmm0_off; } |
| // This really returns a slot in the fp save area, which one is not important |
| static int fpResultOffset(void) { return st0_off; } |
| |
| // During deoptimization only the result register need to be restored |
| // all the other values have already been extracted. |
| |
| static void restore_result_registers(MacroAssembler* masm); |
| |
| }; |
| |
| OopMap* RegisterSaver::save_live_registers(MacroAssembler* masm, int additional_frame_words, |
| int* total_frame_words, bool verify_fpu) { |
| |
| int frame_size_in_bytes = (reg_save_size + additional_frame_words) * wordSize; |
| int frame_words = frame_size_in_bytes / wordSize; |
| *total_frame_words = frame_words; |
| |
| assert(FPUStateSizeInWords == 27, "update stack layout"); |
| |
| // save registers, fpu state, and flags |
| // We assume caller has already has return address slot on the stack |
| // We push epb twice in this sequence because we want the real rbp, |
| // to be under the return like a normal enter and we want to use pushad |
| // We push by hand instead of pusing push |
| __ enter(); |
| __ pushad(); |
| __ pushfd(); |
| __ subl(rsp,FPU_regs_live*sizeof(jdouble)); // Push FPU registers space |
| __ push_FPU_state(); // Save FPU state & init |
| |
| if (verify_fpu) { |
| // Some stubs may have non standard FPU control word settings so |
| // only check and reset the value when it required to be the |
| // standard value. The safepoint blob in particular can be used |
| // in methods which are using the 24 bit control word for |
| // optimized float math. |
| |
| #ifdef ASSERT |
| // Make sure the control word has the expected value |
| Label ok; |
| __ cmpw(Address(rsp, 0), StubRoutines::fpu_cntrl_wrd_std()); |
| __ jccb(Assembler::equal, ok); |
| __ stop("corrupted control word detected"); |
| __ bind(ok); |
| #endif |
| |
| // Reset the control word to guard against exceptions being unmasked |
| // since fstp_d can cause FPU stack underflow exceptions. Write it |
| // into the on stack copy and then reload that to make sure that the |
| // current and future values are correct. |
| __ movw(Address(rsp, 0), StubRoutines::fpu_cntrl_wrd_std()); |
| } |
| |
| __ frstor(Address(rsp, 0)); |
| if (!verify_fpu) { |
| // Set the control word so that exceptions are masked for the |
| // following code. |
| __ fldcw(ExternalAddress(StubRoutines::addr_fpu_cntrl_wrd_std())); |
| } |
| |
| // Save the FPU registers in de-opt-able form |
| |
| __ fstp_d(Address(rsp, st0_off*wordSize)); // st(0) |
| __ fstp_d(Address(rsp, st1_off*wordSize)); // st(1) |
| __ fstp_d(Address(rsp, st2_off*wordSize)); // st(2) |
| __ fstp_d(Address(rsp, st3_off*wordSize)); // st(3) |
| __ fstp_d(Address(rsp, st4_off*wordSize)); // st(4) |
| __ fstp_d(Address(rsp, st5_off*wordSize)); // st(5) |
| __ fstp_d(Address(rsp, st6_off*wordSize)); // st(6) |
| __ fstp_d(Address(rsp, st7_off*wordSize)); // st(7) |
| |
| if( UseSSE == 1 ) { // Save the XMM state |
| __ movflt(Address(rsp,xmm0_off*wordSize),xmm0); |
| __ movflt(Address(rsp,xmm1_off*wordSize),xmm1); |
| __ movflt(Address(rsp,xmm2_off*wordSize),xmm2); |
| __ movflt(Address(rsp,xmm3_off*wordSize),xmm3); |
| __ movflt(Address(rsp,xmm4_off*wordSize),xmm4); |
| __ movflt(Address(rsp,xmm5_off*wordSize),xmm5); |
| __ movflt(Address(rsp,xmm6_off*wordSize),xmm6); |
| __ movflt(Address(rsp,xmm7_off*wordSize),xmm7); |
| } else if( UseSSE >= 2 ) { |
| __ movdbl(Address(rsp,xmm0_off*wordSize),xmm0); |
| __ movdbl(Address(rsp,xmm1_off*wordSize),xmm1); |
| __ movdbl(Address(rsp,xmm2_off*wordSize),xmm2); |
| __ movdbl(Address(rsp,xmm3_off*wordSize),xmm3); |
| __ movdbl(Address(rsp,xmm4_off*wordSize),xmm4); |
| __ movdbl(Address(rsp,xmm5_off*wordSize),xmm5); |
| __ movdbl(Address(rsp,xmm6_off*wordSize),xmm6); |
| __ movdbl(Address(rsp,xmm7_off*wordSize),xmm7); |
| } |
| |
| // Set an oopmap for the call site. This oopmap will map all |
| // oop-registers and debug-info registers as callee-saved. This |
| // will allow deoptimization at this safepoint to find all possible |
| // debug-info recordings, as well as let GC find all oops. |
| |
| OopMapSet *oop_maps = new OopMapSet(); |
| OopMap* map = new OopMap( frame_words, 0 ); |
| |
| #define STACK_OFFSET(x) VMRegImpl::stack2reg((x) + additional_frame_words) |
| |
| map->set_callee_saved(STACK_OFFSET( rax_off), rax->as_VMReg()); |
| map->set_callee_saved(STACK_OFFSET( rcx_off), rcx->as_VMReg()); |
| map->set_callee_saved(STACK_OFFSET( rdx_off), rdx->as_VMReg()); |
| map->set_callee_saved(STACK_OFFSET( rbx_off), rbx->as_VMReg()); |
| // rbp, location is known implicitly, no oopMap |
| map->set_callee_saved(STACK_OFFSET( rsi_off), rsi->as_VMReg()); |
| map->set_callee_saved(STACK_OFFSET( rdi_off), rdi->as_VMReg()); |
| map->set_callee_saved(STACK_OFFSET(st0_off), as_FloatRegister(0)->as_VMReg()); |
| map->set_callee_saved(STACK_OFFSET(st1_off), as_FloatRegister(1)->as_VMReg()); |
| map->set_callee_saved(STACK_OFFSET(st2_off), as_FloatRegister(2)->as_VMReg()); |
| map->set_callee_saved(STACK_OFFSET(st3_off), as_FloatRegister(3)->as_VMReg()); |
| map->set_callee_saved(STACK_OFFSET(st4_off), as_FloatRegister(4)->as_VMReg()); |
| map->set_callee_saved(STACK_OFFSET(st5_off), as_FloatRegister(5)->as_VMReg()); |
| map->set_callee_saved(STACK_OFFSET(st6_off), as_FloatRegister(6)->as_VMReg()); |
| map->set_callee_saved(STACK_OFFSET(st7_off), as_FloatRegister(7)->as_VMReg()); |
| map->set_callee_saved(STACK_OFFSET(xmm0_off), xmm0->as_VMReg()); |
| map->set_callee_saved(STACK_OFFSET(xmm1_off), xmm1->as_VMReg()); |
| map->set_callee_saved(STACK_OFFSET(xmm2_off), xmm2->as_VMReg()); |
| map->set_callee_saved(STACK_OFFSET(xmm3_off), xmm3->as_VMReg()); |
| map->set_callee_saved(STACK_OFFSET(xmm4_off), xmm4->as_VMReg()); |
| map->set_callee_saved(STACK_OFFSET(xmm5_off), xmm5->as_VMReg()); |
| map->set_callee_saved(STACK_OFFSET(xmm6_off), xmm6->as_VMReg()); |
| map->set_callee_saved(STACK_OFFSET(xmm7_off), xmm7->as_VMReg()); |
| // %%% This is really a waste but we'll keep things as they were for now |
| if (true) { |
| #define NEXTREG(x) (x)->as_VMReg()->next() |
| map->set_callee_saved(STACK_OFFSET(st0H_off), NEXTREG(as_FloatRegister(0))); |
| map->set_callee_saved(STACK_OFFSET(st1H_off), NEXTREG(as_FloatRegister(1))); |
| map->set_callee_saved(STACK_OFFSET(st2H_off), NEXTREG(as_FloatRegister(2))); |
| map->set_callee_saved(STACK_OFFSET(st3H_off), NEXTREG(as_FloatRegister(3))); |
| map->set_callee_saved(STACK_OFFSET(st4H_off), NEXTREG(as_FloatRegister(4))); |
| map->set_callee_saved(STACK_OFFSET(st5H_off), NEXTREG(as_FloatRegister(5))); |
| map->set_callee_saved(STACK_OFFSET(st6H_off), NEXTREG(as_FloatRegister(6))); |
| map->set_callee_saved(STACK_OFFSET(st7H_off), NEXTREG(as_FloatRegister(7))); |
| map->set_callee_saved(STACK_OFFSET(xmm0H_off), NEXTREG(xmm0)); |
| map->set_callee_saved(STACK_OFFSET(xmm1H_off), NEXTREG(xmm1)); |
| map->set_callee_saved(STACK_OFFSET(xmm2H_off), NEXTREG(xmm2)); |
| map->set_callee_saved(STACK_OFFSET(xmm3H_off), NEXTREG(xmm3)); |
| map->set_callee_saved(STACK_OFFSET(xmm4H_off), NEXTREG(xmm4)); |
| map->set_callee_saved(STACK_OFFSET(xmm5H_off), NEXTREG(xmm5)); |
| map->set_callee_saved(STACK_OFFSET(xmm6H_off), NEXTREG(xmm6)); |
| map->set_callee_saved(STACK_OFFSET(xmm7H_off), NEXTREG(xmm7)); |
| #undef NEXTREG |
| #undef STACK_OFFSET |
| } |
| |
| return map; |
| |
| } |
| |
| void RegisterSaver::restore_live_registers(MacroAssembler* masm) { |
| |
| // Recover XMM & FPU state |
| if( UseSSE == 1 ) { |
| __ movflt(xmm0,Address(rsp,xmm0_off*wordSize)); |
| __ movflt(xmm1,Address(rsp,xmm1_off*wordSize)); |
| __ movflt(xmm2,Address(rsp,xmm2_off*wordSize)); |
| __ movflt(xmm3,Address(rsp,xmm3_off*wordSize)); |
| __ movflt(xmm4,Address(rsp,xmm4_off*wordSize)); |
| __ movflt(xmm5,Address(rsp,xmm5_off*wordSize)); |
| __ movflt(xmm6,Address(rsp,xmm6_off*wordSize)); |
| __ movflt(xmm7,Address(rsp,xmm7_off*wordSize)); |
| } else if( UseSSE >= 2 ) { |
| __ movdbl(xmm0,Address(rsp,xmm0_off*wordSize)); |
| __ movdbl(xmm1,Address(rsp,xmm1_off*wordSize)); |
| __ movdbl(xmm2,Address(rsp,xmm2_off*wordSize)); |
| __ movdbl(xmm3,Address(rsp,xmm3_off*wordSize)); |
| __ movdbl(xmm4,Address(rsp,xmm4_off*wordSize)); |
| __ movdbl(xmm5,Address(rsp,xmm5_off*wordSize)); |
| __ movdbl(xmm6,Address(rsp,xmm6_off*wordSize)); |
| __ movdbl(xmm7,Address(rsp,xmm7_off*wordSize)); |
| } |
| __ pop_FPU_state(); |
| __ addl(rsp,FPU_regs_live*sizeof(jdouble)); // Pop FPU registers |
| |
| __ popfd(); |
| __ popad(); |
| // Get the rbp, described implicitly by the frame sender code (no oopMap) |
| __ popl(rbp); |
| |
| } |
| |
| void RegisterSaver::restore_result_registers(MacroAssembler* masm) { |
| |
| // Just restore result register. Only used by deoptimization. By |
| // now any callee save register that needs to be restore to a c2 |
| // caller of the deoptee has been extracted into the vframeArray |
| // and will be stuffed into the c2i adapter we create for later |
| // restoration so only result registers need to be restored here. |
| // |
| |
| __ frstor(Address(rsp, 0)); // Restore fpu state |
| |
| // Recover XMM & FPU state |
| if( UseSSE == 1 ) { |
| __ movflt(xmm0, Address(rsp, xmm0_off*wordSize)); |
| } else if( UseSSE >= 2 ) { |
| __ movdbl(xmm0, Address(rsp, xmm0_off*wordSize)); |
| } |
| __ movl(rax, Address(rsp, rax_off*wordSize)); |
| __ movl(rdx, Address(rsp, rdx_off*wordSize)); |
| // Pop all of the register save are off the stack except the return address |
| __ addl(rsp, return_off * wordSize); |
| } |
| |
| // The java_calling_convention describes stack locations as ideal slots on |
| // a frame with no abi restrictions. Since we must observe abi restrictions |
| // (like the placement of the register window) the slots must be biased by |
| // the following value. |
| static int reg2offset_in(VMReg r) { |
| // Account for saved rbp, and return address |
| // This should really be in_preserve_stack_slots |
| return (r->reg2stack() + 2) * VMRegImpl::stack_slot_size; |
| } |
| |
| static int reg2offset_out(VMReg r) { |
| return (r->reg2stack() + SharedRuntime::out_preserve_stack_slots()) * VMRegImpl::stack_slot_size; |
| } |
| |
| // --------------------------------------------------------------------------- |
| // Read the array of BasicTypes from a signature, and compute where the |
| // arguments should go. Values in the VMRegPair regs array refer to 4-byte |
| // quantities. Values less than SharedInfo::stack0 are registers, those above |
| // refer to 4-byte stack slots. All stack slots are based off of the stack pointer |
| // as framesizes are fixed. |
| // VMRegImpl::stack0 refers to the first slot 0(sp). |
| // and VMRegImpl::stack0+1 refers to the memory word 4-byes higher. Register |
| // up to RegisterImpl::number_of_registers) are the 32-bit |
| // integer registers. |
| |
| // Pass first two oop/int args in registers ECX and EDX. |
| // Pass first two float/double args in registers XMM0 and XMM1. |
| // Doubles have precedence, so if you pass a mix of floats and doubles |
| // the doubles will grab the registers before the floats will. |
| |
| // Note: the INPUTS in sig_bt are in units of Java argument words, which are |
| // either 32-bit or 64-bit depending on the build. The OUTPUTS are in 32-bit |
| // units regardless of build. Of course for i486 there is no 64 bit build |
| |
| |
| // --------------------------------------------------------------------------- |
| // The compiled Java calling convention. |
| // Pass first two oop/int args in registers ECX and EDX. |
| // Pass first two float/double args in registers XMM0 and XMM1. |
| // Doubles have precedence, so if you pass a mix of floats and doubles |
| // the doubles will grab the registers before the floats will. |
| int SharedRuntime::java_calling_convention(const BasicType *sig_bt, |
| VMRegPair *regs, |
| int total_args_passed, |
| int is_outgoing) { |
| uint stack = 0; // Starting stack position for args on stack |
| |
| |
| // Pass first two oop/int args in registers ECX and EDX. |
| uint reg_arg0 = 9999; |
| uint reg_arg1 = 9999; |
| |
| // Pass first two float/double args in registers XMM0 and XMM1. |
| // Doubles have precedence, so if you pass a mix of floats and doubles |
| // the doubles will grab the registers before the floats will. |
| // CNC - TURNED OFF FOR non-SSE. |
| // On Intel we have to round all doubles (and most floats) at |
| // call sites by storing to the stack in any case. |
| // UseSSE=0 ==> Don't Use ==> 9999+0 |
| // UseSSE=1 ==> Floats only ==> 9999+1 |
| // UseSSE>=2 ==> Floats or doubles ==> 9999+2 |
| enum { fltarg_dontuse = 9999+0, fltarg_float_only = 9999+1, fltarg_flt_dbl = 9999+2 }; |
| uint fargs = (UseSSE>=2) ? 2 : UseSSE; |
| uint freg_arg0 = 9999+fargs; |
| uint freg_arg1 = 9999+fargs; |
| |
| // Pass doubles & longs aligned on the stack. First count stack slots for doubles |
| int i; |
| for( i = 0; i < total_args_passed; i++) { |
| if( sig_bt[i] == T_DOUBLE ) { |
| // first 2 doubles go in registers |
| if( freg_arg0 == fltarg_flt_dbl ) freg_arg0 = i; |
| else if( freg_arg1 == fltarg_flt_dbl ) freg_arg1 = i; |
| else // Else double is passed low on the stack to be aligned. |
| stack += 2; |
| } else if( sig_bt[i] == T_LONG ) { |
| stack += 2; |
| } |
| } |
| int dstack = 0; // Separate counter for placing doubles |
| |
| // Now pick where all else goes. |
| for( i = 0; i < total_args_passed; i++) { |
| // From the type and the argument number (count) compute the location |
| switch( sig_bt[i] ) { |
| case T_SHORT: |
| case T_CHAR: |
| case T_BYTE: |
| case T_BOOLEAN: |
| case T_INT: |
| case T_ARRAY: |
| case T_OBJECT: |
| case T_ADDRESS: |
| if( reg_arg0 == 9999 ) { |
| reg_arg0 = i; |
| regs[i].set1(rcx->as_VMReg()); |
| } else if( reg_arg1 == 9999 ) { |
| reg_arg1 = i; |
| regs[i].set1(rdx->as_VMReg()); |
| } else { |
| regs[i].set1(VMRegImpl::stack2reg(stack++)); |
| } |
| break; |
| case T_FLOAT: |
| if( freg_arg0 == fltarg_flt_dbl || freg_arg0 == fltarg_float_only ) { |
| freg_arg0 = i; |
| regs[i].set1(xmm0->as_VMReg()); |
| } else if( freg_arg1 == fltarg_flt_dbl || freg_arg1 == fltarg_float_only ) { |
| freg_arg1 = i; |
| regs[i].set1(xmm1->as_VMReg()); |
| } else { |
| regs[i].set1(VMRegImpl::stack2reg(stack++)); |
| } |
| break; |
| case T_LONG: |
| assert(sig_bt[i+1] == T_VOID, "missing Half" ); |
| regs[i].set2(VMRegImpl::stack2reg(dstack)); |
| dstack += 2; |
| break; |
| case T_DOUBLE: |
| assert(sig_bt[i+1] == T_VOID, "missing Half" ); |
| if( freg_arg0 == (uint)i ) { |
| regs[i].set2(xmm0->as_VMReg()); |
| } else if( freg_arg1 == (uint)i ) { |
| regs[i].set2(xmm1->as_VMReg()); |
| } else { |
| regs[i].set2(VMRegImpl::stack2reg(dstack)); |
| dstack += 2; |
| } |
| break; |
| case T_VOID: regs[i].set_bad(); break; |
| break; |
| default: |
| ShouldNotReachHere(); |
| break; |
| } |
| } |
| |
| // return value can be odd number of VMRegImpl stack slots make multiple of 2 |
| return round_to(stack, 2); |
| } |
| |
| // Patch the callers callsite with entry to compiled code if it exists. |
| static void patch_callers_callsite(MacroAssembler *masm) { |
| Label L; |
| __ verify_oop(rbx); |
| __ cmpl(Address(rbx, in_bytes(methodOopDesc::code_offset())), NULL_WORD); |
| __ jcc(Assembler::equal, L); |
| // Schedule the branch target address early. |
| // Call into the VM to patch the caller, then jump to compiled callee |
| // rax, isn't live so capture return address while we easily can |
| __ movl(rax, Address(rsp, 0)); |
| __ pushad(); |
| __ pushfd(); |
| |
| if (UseSSE == 1) { |
| __ subl(rsp, 2*wordSize); |
| __ movflt(Address(rsp, 0), xmm0); |
| __ movflt(Address(rsp, wordSize), xmm1); |
| } |
| if (UseSSE >= 2) { |
| __ subl(rsp, 4*wordSize); |
| __ movdbl(Address(rsp, 0), xmm0); |
| __ movdbl(Address(rsp, 2*wordSize), xmm1); |
| } |
| #ifdef COMPILER2 |
| // C2 may leave the stack dirty if not in SSE2+ mode |
| if (UseSSE >= 2) { |
| __ verify_FPU(0, "c2i transition should have clean FPU stack"); |
| } else { |
| __ empty_FPU_stack(); |
| } |
| #endif /* COMPILER2 */ |
| |
| // VM needs caller's callsite |
| __ pushl(rax); |
| // VM needs target method |
| __ pushl(rbx); |
| __ verify_oop(rbx); |
| __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, SharedRuntime::fixup_callers_callsite))); |
| __ addl(rsp, 2*wordSize); |
| |
| if (UseSSE == 1) { |
| __ movflt(xmm0, Address(rsp, 0)); |
| __ movflt(xmm1, Address(rsp, wordSize)); |
| __ addl(rsp, 2*wordSize); |
| } |
| if (UseSSE >= 2) { |
| __ movdbl(xmm0, Address(rsp, 0)); |
| __ movdbl(xmm1, Address(rsp, 2*wordSize)); |
| __ addl(rsp, 4*wordSize); |
| } |
| |
| __ popfd(); |
| __ popad(); |
| __ bind(L); |
| } |
| |
| |
| // Helper function to put tags in interpreter stack. |
| static void tag_stack(MacroAssembler *masm, const BasicType sig, int st_off) { |
| if (TaggedStackInterpreter) { |
| int tag_offset = st_off + Interpreter::expr_tag_offset_in_bytes(0); |
| if (sig == T_OBJECT || sig == T_ARRAY) { |
| __ movl(Address(rsp, tag_offset), frame::TagReference); |
| } else if (sig == T_LONG || sig == T_DOUBLE) { |
| int next_tag_offset = st_off + Interpreter::expr_tag_offset_in_bytes(1); |
| __ movl(Address(rsp, next_tag_offset), frame::TagValue); |
| __ movl(Address(rsp, tag_offset), frame::TagValue); |
| } else { |
| __ movl(Address(rsp, tag_offset), frame::TagValue); |
| } |
| } |
| } |
| |
| // Double and long values with Tagged stacks are not contiguous. |
| static void move_c2i_double(MacroAssembler *masm, XMMRegister r, int st_off) { |
| int next_off = st_off - Interpreter::stackElementSize(); |
| if (TaggedStackInterpreter) { |
| __ movdbl(Address(rsp, next_off), r); |
| // Move top half up and put tag in the middle. |
| __ movl(rdi, Address(rsp, next_off+wordSize)); |
| __ movl(Address(rsp, st_off), rdi); |
| tag_stack(masm, T_DOUBLE, next_off); |
| } else { |
| __ movdbl(Address(rsp, next_off), r); |
| } |
| } |
| |
| static void gen_c2i_adapter(MacroAssembler *masm, |
| int total_args_passed, |
| int comp_args_on_stack, |
| const BasicType *sig_bt, |
| const VMRegPair *regs, |
| Label& skip_fixup) { |
| // Before we get into the guts of the C2I adapter, see if we should be here |
| // at all. We've come from compiled code and are attempting to jump to the |
| // interpreter, which means the caller made a static call to get here |
| // (vcalls always get a compiled target if there is one). Check for a |
| // compiled target. If there is one, we need to patch the caller's call. |
| patch_callers_callsite(masm); |
| |
| __ bind(skip_fixup); |
| |
| #ifdef COMPILER2 |
| // C2 may leave the stack dirty if not in SSE2+ mode |
| if (UseSSE >= 2) { |
| __ verify_FPU(0, "c2i transition should have clean FPU stack"); |
| } else { |
| __ empty_FPU_stack(); |
| } |
| #endif /* COMPILER2 */ |
| |
| // Since all args are passed on the stack, total_args_passed * interpreter_ |
| // stack_element_size is the |
| // space we need. |
| int extraspace = total_args_passed * Interpreter::stackElementSize(); |
| |
| // Get return address |
| __ popl(rax); |
| |
| // set senderSP value |
| __ movl(rsi, rsp); |
| |
| __ subl(rsp, extraspace); |
| |
| // Now write the args into the outgoing interpreter space |
| for (int i = 0; i < total_args_passed; i++) { |
| if (sig_bt[i] == T_VOID) { |
| assert(i > 0 && (sig_bt[i-1] == T_LONG || sig_bt[i-1] == T_DOUBLE), "missing half"); |
| continue; |
| } |
| |
| // st_off points to lowest address on stack. |
| int st_off = ((total_args_passed - 1) - i) * Interpreter::stackElementSize(); |
| // Say 4 args: |
| // i st_off |
| // 0 12 T_LONG |
| // 1 8 T_VOID |
| // 2 4 T_OBJECT |
| // 3 0 T_BOOL |
| VMReg r_1 = regs[i].first(); |
| VMReg r_2 = regs[i].second(); |
| if (!r_1->is_valid()) { |
| assert(!r_2->is_valid(), ""); |
| continue; |
| } |
| |
| if (r_1->is_stack()) { |
| // memory to memory use fpu stack top |
| int ld_off = r_1->reg2stack() * VMRegImpl::stack_slot_size + extraspace; |
| |
| if (!r_2->is_valid()) { |
| __ movl(rdi, Address(rsp, ld_off)); |
| __ movl(Address(rsp, st_off), rdi); |
| tag_stack(masm, sig_bt[i], st_off); |
| } else { |
| |
| // ld_off == LSW, ld_off+VMRegImpl::stack_slot_size == MSW |
| // st_off == MSW, st_off-wordSize == LSW |
| |
| int next_off = st_off - Interpreter::stackElementSize(); |
| __ movl(rdi, Address(rsp, ld_off)); |
| __ movl(Address(rsp, next_off), rdi); |
| __ movl(rdi, Address(rsp, ld_off + wordSize)); |
| __ movl(Address(rsp, st_off), rdi); |
| tag_stack(masm, sig_bt[i], next_off); |
| } |
| } else if (r_1->is_Register()) { |
| Register r = r_1->as_Register(); |
| if (!r_2->is_valid()) { |
| __ movl(Address(rsp, st_off), r); |
| tag_stack(masm, sig_bt[i], st_off); |
| } else { |
| // long/double in gpr |
| ShouldNotReachHere(); |
| } |
| } else { |
| assert(r_1->is_XMMRegister(), ""); |
| if (!r_2->is_valid()) { |
| __ movflt(Address(rsp, st_off), r_1->as_XMMRegister()); |
| tag_stack(masm, sig_bt[i], st_off); |
| } else { |
| assert(sig_bt[i] == T_DOUBLE || sig_bt[i] == T_LONG, "wrong type"); |
| move_c2i_double(masm, r_1->as_XMMRegister(), st_off); |
| } |
| } |
| } |
| |
| // Schedule the branch target address early. |
| __ movl(rcx, Address(rbx, in_bytes(methodOopDesc::interpreter_entry_offset()))); |
| // And repush original return address |
| __ pushl(rax); |
| __ jmp(rcx); |
| } |
| |
| |
| // For tagged stacks, double or long value aren't contiguous on the stack |
| // so get them contiguous for the xmm load |
| static void move_i2c_double(MacroAssembler *masm, XMMRegister r, Register saved_sp, int ld_off) { |
| int next_val_off = ld_off - Interpreter::stackElementSize(); |
| if (TaggedStackInterpreter) { |
| // use tag slot temporarily for MSW |
| __ movl(rsi, Address(saved_sp, ld_off)); |
| __ movl(Address(saved_sp, next_val_off+wordSize), rsi); |
| __ movdbl(r, Address(saved_sp, next_val_off)); |
| // restore tag |
| __ movl(Address(saved_sp, next_val_off+wordSize), frame::TagValue); |
| } else { |
| __ movdbl(r, Address(saved_sp, next_val_off)); |
| } |
| } |
| |
| static void gen_i2c_adapter(MacroAssembler *masm, |
| int total_args_passed, |
| int comp_args_on_stack, |
| const BasicType *sig_bt, |
| const VMRegPair *regs) { |
| // we're being called from the interpreter but need to find the |
| // compiled return entry point. The return address on the stack |
| // should point at it and we just need to pull the old value out. |
| // load up the pointer to the compiled return entry point and |
| // rewrite our return pc. The code is arranged like so: |
| // |
| // .word Interpreter::return_sentinel |
| // .word address_of_compiled_return_point |
| // return_entry_point: blah_blah_blah |
| // |
| // So we can find the appropriate return point by loading up the word |
| // just prior to the current return address we have on the stack. |
| // |
| // We will only enter here from an interpreted frame and never from after |
| // passing thru a c2i. Azul allowed this but we do not. If we lose the |
| // race and use a c2i we will remain interpreted for the race loser(s). |
| // This removes all sorts of headaches on the x86 side and also eliminates |
| // the possibility of having c2i -> i2c -> c2i -> ... endless transitions. |
| |
| |
| // Note: rsi contains the senderSP on entry. We must preserve it since |
| // we may do a i2c -> c2i transition if we lose a race where compiled |
| // code goes non-entrant while we get args ready. |
| |
| // Pick up the return address |
| __ movl(rax, Address(rsp, 0)); |
| |
| // If UseSSE >= 2 then no cleanup is needed on the return to the |
| // interpreter so skip fixing up the return entry point unless |
| // VerifyFPU is enabled. |
| if (UseSSE < 2 || VerifyFPU) { |
| Label skip, chk_int; |
| // If we were called from the call stub we need to do a little bit different |
| // cleanup than if the interpreter returned to the call stub. |
| |
| ExternalAddress stub_return_address(StubRoutines::_call_stub_return_address); |
| __ cmp32(rax, stub_return_address.addr()); |
| __ jcc(Assembler::notEqual, chk_int); |
| assert(StubRoutines::i486::get_call_stub_compiled_return() != NULL, "must be set"); |
| __ lea(rax, ExternalAddress(StubRoutines::i486::get_call_stub_compiled_return())); |
| __ jmp(skip); |
| |
| // It must be the interpreter since we never get here via a c2i (unlike Azul) |
| |
| __ bind(chk_int); |
| #ifdef ASSERT |
| { |
| Label ok; |
| __ cmpl(Address(rax, -8), Interpreter::return_sentinel); |
| __ jcc(Assembler::equal, ok); |
| __ int3(); |
| __ bind(ok); |
| } |
| #endif // ASSERT |
| __ movl(rax, Address(rax, -4)); |
| __ bind(skip); |
| } |
| |
| // rax, now contains the compiled return entry point which will do an |
| // cleanup needed for the return from compiled to interpreted. |
| |
| // Must preserve original SP for loading incoming arguments because |
| // we need to align the outgoing SP for compiled code. |
| __ movl(rdi, rsp); |
| |
| // Cut-out for having no stack args. Since up to 2 int/oop args are passed |
| // in registers, we will occasionally have no stack args. |
| int comp_words_on_stack = 0; |
| if (comp_args_on_stack) { |
| // Sig words on the stack are greater-than VMRegImpl::stack0. Those in |
| // registers are below. By subtracting stack0, we either get a negative |
| // number (all values in registers) or the maximum stack slot accessed. |
| // int comp_args_on_stack = VMRegImpl::reg2stack(max_arg); |
| // Convert 4-byte stack slots to words. |
| comp_words_on_stack = round_to(comp_args_on_stack*4, wordSize)>>LogBytesPerWord; |
| // Round up to miminum stack alignment, in wordSize |
| comp_words_on_stack = round_to(comp_words_on_stack, 2); |
| __ subl(rsp, comp_words_on_stack * wordSize); |
| } |
| |
| // Align the outgoing SP |
| __ andl(rsp, -(StackAlignmentInBytes)); |
| |
| // push the return address on the stack (note that pushing, rather |
| // than storing it, yields the correct frame alignment for the callee) |
| __ pushl(rax); |
| |
| // Put saved SP in another register |
| const Register saved_sp = rax; |
| __ movl(saved_sp, rdi); |
| |
| |
| // Will jump to the compiled code just as if compiled code was doing it. |
| // Pre-load the register-jump target early, to schedule it better. |
| __ movl(rdi, Address(rbx, in_bytes(methodOopDesc::from_compiled_offset()))); |
| |
| // Now generate the shuffle code. Pick up all register args and move the |
| // rest through the floating point stack top. |
| for (int i = 0; i < total_args_passed; i++) { |
| if (sig_bt[i] == T_VOID) { |
| // Longs and doubles are passed in native word order, but misaligned |
| // in the 32-bit build. |
| assert(i > 0 && (sig_bt[i-1] == T_LONG || sig_bt[i-1] == T_DOUBLE), "missing half"); |
| continue; |
| } |
| |
| // Pick up 0, 1 or 2 words from SP+offset. |
| |
| assert(!regs[i].second()->is_valid() || regs[i].first()->next() == regs[i].second(), |
| "scrambled load targets?"); |
| // Load in argument order going down. |
| int ld_off = (total_args_passed - i)*Interpreter::stackElementSize() + Interpreter::value_offset_in_bytes(); |
| // Point to interpreter value (vs. tag) |
| int next_off = ld_off - Interpreter::stackElementSize(); |
| // |
| // |
| // |
| VMReg r_1 = regs[i].first(); |
| VMReg r_2 = regs[i].second(); |
| if (!r_1->is_valid()) { |
| assert(!r_2->is_valid(), ""); |
| continue; |
| } |
| if (r_1->is_stack()) { |
| // Convert stack slot to an SP offset (+ wordSize to account for return address ) |
| int st_off = regs[i].first()->reg2stack()*VMRegImpl::stack_slot_size + wordSize; |
| |
| // We can use rsi as a temp here because compiled code doesn't need rsi as an input |
| // and if we end up going thru a c2i because of a miss a reasonable value of rsi |
| // we be generated. |
| if (!r_2->is_valid()) { |
| // __ fld_s(Address(saved_sp, ld_off)); |
| // __ fstp_s(Address(rsp, st_off)); |
| __ movl(rsi, Address(saved_sp, ld_off)); |
| __ movl(Address(rsp, st_off), rsi); |
| } else { |
| // Interpreter local[n] == MSW, local[n+1] == LSW however locals |
| // are accessed as negative so LSW is at LOW address |
| |
| // ld_off is MSW so get LSW |
| // st_off is LSW (i.e. reg.first()) |
| // __ fld_d(Address(saved_sp, next_off)); |
| // __ fstp_d(Address(rsp, st_off)); |
| __ movl(rsi, Address(saved_sp, next_off)); |
| __ movl(Address(rsp, st_off), rsi); |
| __ movl(rsi, Address(saved_sp, ld_off)); |
| __ movl(Address(rsp, st_off + wordSize), rsi); |
| } |
| } else if (r_1->is_Register()) { // Register argument |
| Register r = r_1->as_Register(); |
| assert(r != rax, "must be different"); |
| if (r_2->is_valid()) { |
| assert(r_2->as_Register() != rax, "need another temporary register"); |
| // Remember r_1 is low address (and LSB on x86) |
| // So r_2 gets loaded from high address regardless of the platform |
| __ movl(r_2->as_Register(), Address(saved_sp, ld_off)); |
| __ movl(r, Address(saved_sp, next_off)); |
| } else { |
| __ movl(r, Address(saved_sp, ld_off)); |
| } |
| } else { |
| assert(r_1->is_XMMRegister(), ""); |
| if (!r_2->is_valid()) { |
| __ movflt(r_1->as_XMMRegister(), Address(saved_sp, ld_off)); |
| } else { |
| move_i2c_double(masm, r_1->as_XMMRegister(), saved_sp, ld_off); |
| } |
| } |
| } |
| |
| // 6243940 We might end up in handle_wrong_method if |
| // the callee is deoptimized as we race thru here. If that |
| // happens we don't want to take a safepoint because the |
| // caller frame will look interpreted and arguments are now |
| // "compiled" so it is much better to make this transition |
| // invisible to the stack walking code. Unfortunately if |
| // we try and find the callee by normal means a safepoint |
| // is possible. So we stash the desired callee in the thread |
| // and the vm will find there should this case occur. |
| |
| __ get_thread(rax); |
| __ movl(Address(rax, JavaThread::callee_target_offset()), rbx); |
| |
| // move methodOop to rax, in case we end up in an c2i adapter. |
| // the c2i adapters expect methodOop in rax, (c2) because c2's |
| // resolve stubs return the result (the method) in rax,. |
| // I'd love to fix this. |
| __ movl(rax, rbx); |
| |
| __ jmp(rdi); |
| } |
| |
| // --------------------------------------------------------------- |
| AdapterHandlerEntry* SharedRuntime::generate_i2c2i_adapters(MacroAssembler *masm, |
| int total_args_passed, |
| int comp_args_on_stack, |
| const BasicType *sig_bt, |
| const VMRegPair *regs) { |
| address i2c_entry = __ pc(); |
| |
| gen_i2c_adapter(masm, total_args_passed, comp_args_on_stack, sig_bt, regs); |
| |
| // ------------------------------------------------------------------------- |
| // Generate a C2I adapter. On entry we know rbx, holds the methodOop during calls |
| // to the interpreter. The args start out packed in the compiled layout. They |
| // need to be unpacked into the interpreter layout. This will almost always |
| // require some stack space. We grow the current (compiled) stack, then repack |
| // the args. We finally end in a jump to the generic interpreter entry point. |
| // On exit from the interpreter, the interpreter will restore our SP (lest the |
| // compiled code, which relys solely on SP and not EBP, get sick). |
| |
| address c2i_unverified_entry = __ pc(); |
| Label skip_fixup; |
| |
| Register holder = rax; |
| Register receiver = rcx; |
| Register temp = rbx; |
| |
| { |
| |
| Label missed; |
| |
| __ verify_oop(holder); |
| __ movl(temp, Address(receiver, oopDesc::klass_offset_in_bytes())); |
| __ verify_oop(temp); |
| |
| __ cmpl(temp, Address(holder, compiledICHolderOopDesc::holder_klass_offset())); |
| __ movl(rbx, Address(holder, compiledICHolderOopDesc::holder_method_offset())); |
| __ jcc(Assembler::notEqual, missed); |
| // Method might have been compiled since the call site was patched to |
| // interpreted if that is the case treat it as a miss so we can get |
| // the call site corrected. |
| __ cmpl(Address(rbx, in_bytes(methodOopDesc::code_offset())), NULL_WORD); |
| __ jcc(Assembler::equal, skip_fixup); |
| |
| __ bind(missed); |
| __ jump(RuntimeAddress(SharedRuntime::get_ic_miss_stub())); |
| } |
| |
| address c2i_entry = __ pc(); |
| |
| gen_c2i_adapter(masm, total_args_passed, comp_args_on_stack, sig_bt, regs, skip_fixup); |
| |
| __ flush(); |
| return new AdapterHandlerEntry(i2c_entry, c2i_entry, c2i_unverified_entry); |
| } |
| |
| int SharedRuntime::c_calling_convention(const BasicType *sig_bt, |
| VMRegPair *regs, |
| int total_args_passed) { |
| // We return the amount of VMRegImpl stack slots we need to reserve for all |
| // the arguments NOT counting out_preserve_stack_slots. |
| |
| uint stack = 0; // All arguments on stack |
| |
| for( int i = 0; i < total_args_passed; i++) { |
| // From the type and the argument number (count) compute the location |
| switch( sig_bt[i] ) { |
| case T_BOOLEAN: |
| case T_CHAR: |
| case T_FLOAT: |
| case T_BYTE: |
| case T_SHORT: |
| case T_INT: |
| case T_OBJECT: |
| case T_ARRAY: |
| case T_ADDRESS: |
| regs[i].set1(VMRegImpl::stack2reg(stack++)); |
| break; |
| case T_LONG: |
| case T_DOUBLE: // The stack numbering is reversed from Java |
| // Since C arguments do not get reversed, the ordering for |
| // doubles on the stack must be opposite the Java convention |
| assert(sig_bt[i+1] == T_VOID, "missing Half" ); |
| regs[i].set2(VMRegImpl::stack2reg(stack)); |
| stack += 2; |
| break; |
| case T_VOID: regs[i].set_bad(); break; |
| default: |
| ShouldNotReachHere(); |
| break; |
| } |
| } |
| return stack; |
| } |
| |
| // A simple move of integer like type |
| static void simple_move32(MacroAssembler* masm, VMRegPair src, VMRegPair dst) { |
| if (src.first()->is_stack()) { |
| if (dst.first()->is_stack()) { |
| // stack to stack |
| // __ ld(FP, reg2offset(src.first()) + STACK_BIAS, L5); |
| // __ st(L5, SP, reg2offset(dst.first()) + STACK_BIAS); |
| __ movl(rax, Address(rbp, reg2offset_in(src.first()))); |
| __ movl(Address(rsp, reg2offset_out(dst.first())), rax); |
| } else { |
| // stack to reg |
| __ movl(dst.first()->as_Register(), Address(rbp, reg2offset_in(src.first()))); |
| } |
| } else if (dst.first()->is_stack()) { |
| // reg to stack |
| __ movl(Address(rsp, reg2offset_out(dst.first())), src.first()->as_Register()); |
| } else { |
| __ movl(dst.first()->as_Register(), src.first()->as_Register()); |
| } |
| } |
| |
| // An oop arg. Must pass a handle not the oop itself |
| static void object_move(MacroAssembler* masm, |
| OopMap* map, |
| int oop_handle_offset, |
| int framesize_in_slots, |
| VMRegPair src, |
| VMRegPair dst, |
| bool is_receiver, |
| int* receiver_offset) { |
| |
| // Because of the calling conventions we know that src can be a |
| // register or a stack location. dst can only be a stack location. |
| |
| assert(dst.first()->is_stack(), "must be stack"); |
| // must pass a handle. First figure out the location we use as a handle |
| |
| if (src.first()->is_stack()) { |
| // Oop is already on the stack as an argument |
| Register rHandle = rax; |
| Label nil; |
| __ xorl(rHandle, rHandle); |
| __ cmpl(Address(rbp, reg2offset_in(src.first())), NULL_WORD); |
| __ jcc(Assembler::equal, nil); |
| __ leal(rHandle, Address(rbp, reg2offset_in(src.first()))); |
| __ bind(nil); |
| __ movl(Address(rsp, reg2offset_out(dst.first())), rHandle); |
| |
| int offset_in_older_frame = src.first()->reg2stack() + SharedRuntime::out_preserve_stack_slots(); |
| map->set_oop(VMRegImpl::stack2reg(offset_in_older_frame + framesize_in_slots)); |
| if (is_receiver) { |
| *receiver_offset = (offset_in_older_frame + framesize_in_slots) * VMRegImpl::stack_slot_size; |
| } |
| } else { |
| // Oop is in an a register we must store it to the space we reserve |
| // on the stack for oop_handles |
| const Register rOop = src.first()->as_Register(); |
| const Register rHandle = rax; |
| int oop_slot = (rOop == rcx ? 0 : 1) * VMRegImpl::slots_per_word + oop_handle_offset; |
| int offset = oop_slot*VMRegImpl::stack_slot_size; |
| Label skip; |
| __ movl(Address(rsp, offset), rOop); |
| map->set_oop(VMRegImpl::stack2reg(oop_slot)); |
| __ xorl(rHandle, rHandle); |
| __ cmpl(rOop, NULL_WORD); |
| __ jcc(Assembler::equal, skip); |
| __ leal(rHandle, Address(rsp, offset)); |
| __ bind(skip); |
| // Store the handle parameter |
| __ movl(Address(rsp, reg2offset_out(dst.first())), rHandle); |
| if (is_receiver) { |
| *receiver_offset = offset; |
| } |
| } |
| } |
| |
| // A float arg may have to do float reg int reg conversion |
| static void float_move(MacroAssembler* masm, VMRegPair src, VMRegPair dst) { |
| assert(!src.second()->is_valid() && !dst.second()->is_valid(), "bad float_move"); |
| |
| // Because of the calling convention we know that src is either a stack location |
| // or an xmm register. dst can only be a stack location. |
| |
| assert(dst.first()->is_stack() && ( src.first()->is_stack() || src.first()->is_XMMRegister()), "bad parameters"); |
| |
| if (src.first()->is_stack()) { |
| __ movl(rax, Address(rbp, reg2offset_in(src.first()))); |
| __ movl(Address(rsp, reg2offset_out(dst.first())), rax); |
| } else { |
| // reg to stack |
| __ movflt(Address(rsp, reg2offset_out(dst.first())), src.first()->as_XMMRegister()); |
| } |
| } |
| |
| // A long move |
| static void long_move(MacroAssembler* masm, VMRegPair src, VMRegPair dst) { |
| |
| // The only legal possibility for a long_move VMRegPair is: |
| // 1: two stack slots (possibly unaligned) |
| // as neither the java or C calling convention will use registers |
| // for longs. |
| |
| if (src.first()->is_stack() && dst.first()->is_stack()) { |
| assert(src.second()->is_stack() && dst.second()->is_stack(), "must be all stack"); |
| __ movl(rax, Address(rbp, reg2offset_in(src.first()))); |
| __ movl(rbx, Address(rbp, reg2offset_in(src.second()))); |
| __ movl(Address(rsp, reg2offset_out(dst.first())), rax); |
| __ movl(Address(rsp, reg2offset_out(dst.second())), rbx); |
| } else { |
| ShouldNotReachHere(); |
| } |
| } |
| |
| // A double move |
| static void double_move(MacroAssembler* masm, VMRegPair src, VMRegPair dst) { |
| |
| // The only legal possibilities for a double_move VMRegPair are: |
| // The painful thing here is that like long_move a VMRegPair might be |
| |
| // Because of the calling convention we know that src is either |
| // 1: a single physical register (xmm registers only) |
| // 2: two stack slots (possibly unaligned) |
| // dst can only be a pair of stack slots. |
| |
| assert(dst.first()->is_stack() && (src.first()->is_XMMRegister() || src.first()->is_stack()), "bad args"); |
| |
| if (src.first()->is_stack()) { |
| // source is all stack |
| __ movl(rax, Address(rbp, reg2offset_in(src.first()))); |
| __ movl(rbx, Address(rbp, reg2offset_in(src.second()))); |
| __ movl(Address(rsp, reg2offset_out(dst.first())), rax); |
| __ movl(Address(rsp, reg2offset_out(dst.second())), rbx); |
| } else { |
| // reg to stack |
| // No worries about stack alignment |
| __ movdbl(Address(rsp, reg2offset_out(dst.first())), src.first()->as_XMMRegister()); |
| } |
| } |
| |
| |
| void SharedRuntime::save_native_result(MacroAssembler *masm, BasicType ret_type, int frame_slots) { |
| // We always ignore the frame_slots arg and just use the space just below frame pointer |
| // which by this time is free to use |
| switch (ret_type) { |
| case T_FLOAT: |
| __ fstp_s(Address(rbp, -wordSize)); |
| break; |
| case T_DOUBLE: |
| __ fstp_d(Address(rbp, -2*wordSize)); |
| break; |
| case T_VOID: break; |
| case T_LONG: |
| __ movl(Address(rbp, -wordSize), rax); |
| __ movl(Address(rbp, -2*wordSize), rdx); |
| break; |
| default: { |
| __ movl(Address(rbp, -wordSize), rax); |
| } |
| } |
| } |
| |
| void SharedRuntime::restore_native_result(MacroAssembler *masm, BasicType ret_type, int frame_slots) { |
| // We always ignore the frame_slots arg and just use the space just below frame pointer |
| // which by this time is free to use |
| switch (ret_type) { |
| case T_FLOAT: |
| __ fld_s(Address(rbp, -wordSize)); |
| break; |
| case T_DOUBLE: |
| __ fld_d(Address(rbp, -2*wordSize)); |
| break; |
| case T_LONG: |
| __ movl(rax, Address(rbp, -wordSize)); |
| __ movl(rdx, Address(rbp, -2*wordSize)); |
| break; |
| case T_VOID: break; |
| default: { |
| __ movl(rax, Address(rbp, -wordSize)); |
| } |
| } |
| } |
| |
| // --------------------------------------------------------------------------- |
| // Generate a native wrapper for a given method. The method takes arguments |
| // in the Java compiled code convention, marshals them to the native |
| // convention (handlizes oops, etc), transitions to native, makes the call, |
| // returns to java state (possibly blocking), unhandlizes any result and |
| // returns. |
| nmethod *SharedRuntime::generate_native_wrapper(MacroAssembler *masm, |
| methodHandle method, |
| int total_in_args, |
| int comp_args_on_stack, |
| BasicType *in_sig_bt, |
| VMRegPair *in_regs, |
| BasicType ret_type) { |
| |
| // An OopMap for lock (and class if static) |
| OopMapSet *oop_maps = new OopMapSet(); |
| |
| // We have received a description of where all the java arg are located |
| // on entry to the wrapper. We need to convert these args to where |
| // the jni function will expect them. To figure out where they go |
| // we convert the java signature to a C signature by inserting |
| // the hidden arguments as arg[0] and possibly arg[1] (static method) |
| |
| int total_c_args = total_in_args + 1; |
| if (method->is_static()) { |
| total_c_args++; |
| } |
| |
| BasicType* out_sig_bt = NEW_RESOURCE_ARRAY(BasicType, total_c_args); |
| VMRegPair* out_regs = NEW_RESOURCE_ARRAY(VMRegPair, total_c_args); |
| |
| int argc = 0; |
| out_sig_bt[argc++] = T_ADDRESS; |
| if (method->is_static()) { |
| out_sig_bt[argc++] = T_OBJECT; |
| } |
| |
| int i; |
| for (i = 0; i < total_in_args ; i++ ) { |
| out_sig_bt[argc++] = in_sig_bt[i]; |
| } |
| |
| |
| // Now figure out where the args must be stored and how much stack space |
| // they require (neglecting out_preserve_stack_slots but space for storing |
| // the 1st six register arguments). It's weird see int_stk_helper. |
| // |
| int out_arg_slots; |
| out_arg_slots = c_calling_convention(out_sig_bt, out_regs, total_c_args); |
| |
| // Compute framesize for the wrapper. We need to handlize all oops in |
| // registers a max of 2 on x86. |
| |
| // Calculate the total number of stack slots we will need. |
| |
| // First count the abi requirement plus all of the outgoing args |
| int stack_slots = SharedRuntime::out_preserve_stack_slots() + out_arg_slots; |
| |
| // Now the space for the inbound oop handle area |
| |
| int oop_handle_offset = stack_slots; |
| stack_slots += 2*VMRegImpl::slots_per_word; |
| |
| // Now any space we need for handlizing a klass if static method |
| |
| int klass_slot_offset = 0; |
| int klass_offset = -1; |
| int lock_slot_offset = 0; |
| bool is_static = false; |
| int oop_temp_slot_offset = 0; |
| |
| if (method->is_static()) { |
| klass_slot_offset = stack_slots; |
| stack_slots += VMRegImpl::slots_per_word; |
| klass_offset = klass_slot_offset * VMRegImpl::stack_slot_size; |
| is_static = true; |
| } |
| |
| // Plus a lock if needed |
| |
| if (method->is_synchronized()) { |
| lock_slot_offset = stack_slots; |
| stack_slots += VMRegImpl::slots_per_word; |
| } |
| |
| // Now a place (+2) to save return values or temp during shuffling |
| // + 2 for return address (which we own) and saved rbp, |
| stack_slots += 4; |
| |
| // Ok The space we have allocated will look like: |
| // |
| // |
| // FP-> | | |
| // |---------------------| |
| // | 2 slots for moves | |
| // |---------------------| |
| // | lock box (if sync) | |
| // |---------------------| <- lock_slot_offset (-lock_slot_rbp_offset) |
| // | klass (if static) | |
| // |---------------------| <- klass_slot_offset |
| // | oopHandle area | |
| // |---------------------| <- oop_handle_offset (a max of 2 registers) |
| // | outbound memory | |
| // | based arguments | |
| // | | |
| // |---------------------| |
| // | | |
| // SP-> | out_preserved_slots | |
| // |
| // |
| // **************************************************************************** |
| // WARNING - on Windows Java Natives use pascal calling convention and pop the |
| // arguments off of the stack after the jni call. Before the call we can use |
| // instructions that are SP relative. After the jni call we switch to FP |
| // relative instructions instead of re-adjusting the stack on windows. |
| // **************************************************************************** |
| |
| |
| // Now compute actual number of stack words we need rounding to make |
| // stack properly aligned. |
| stack_slots = round_to(stack_slots, 2 * VMRegImpl::slots_per_word); |
| |
| int stack_size = stack_slots * VMRegImpl::stack_slot_size; |
| |
| intptr_t start = (intptr_t)__ pc(); |
| |
| // First thing make an ic check to see if we should even be here |
| |
| // We are free to use all registers as temps without saving them and |
| // restoring them except rbp,. rbp, is the only callee save register |
| // as far as the interpreter and the compiler(s) are concerned. |
| |
| |
| const Register ic_reg = rax; |
| const Register receiver = rcx; |
| Label hit; |
| Label exception_pending; |
| |
| |
| __ verify_oop(receiver); |
| __ cmpl(ic_reg, Address(receiver, oopDesc::klass_offset_in_bytes())); |
| __ jcc(Assembler::equal, hit); |
| |
| __ jump(RuntimeAddress(SharedRuntime::get_ic_miss_stub())); |
| |
| // verified entry must be aligned for code patching. |
| // and the first 5 bytes must be in the same cache line |
| // if we align at 8 then we will be sure 5 bytes are in the same line |
| __ align(8); |
| |
| __ bind(hit); |
| |
| int vep_offset = ((intptr_t)__ pc()) - start; |
| |
| #ifdef COMPILER1 |
| if (InlineObjectHash && method->intrinsic_id() == vmIntrinsics::_hashCode) { |
| // Object.hashCode can pull the hashCode from the header word |
| // instead of doing a full VM transition once it's been computed. |
| // Since hashCode is usually polymorphic at call sites we can't do |
| // this optimization at the call site without a lot of work. |
| Label slowCase; |
| Register receiver = rcx; |
| Register result = rax; |
| __ movl(result, Address(receiver, oopDesc::mark_offset_in_bytes())); |
| |
| // check if locked |
| __ testl (result, markOopDesc::unlocked_value); |
| __ jcc (Assembler::zero, slowCase); |
| |
| if (UseBiasedLocking) { |
| // Check if biased and fall through to runtime if so |
| __ testl (result, markOopDesc::biased_lock_bit_in_place); |
| __ jcc (Assembler::notZero, slowCase); |
| } |
| |
| // get hash |
| __ andl (result, markOopDesc::hash_mask_in_place); |
| // test if hashCode exists |
| __ jcc (Assembler::zero, slowCase); |
| __ shrl (result, markOopDesc::hash_shift); |
| __ ret(0); |
| __ bind (slowCase); |
| } |
| #endif // COMPILER1 |
| |
| // The instruction at the verified entry point must be 5 bytes or longer |
| // because it can be patched on the fly by make_non_entrant. The stack bang |
| // instruction fits that requirement. |
| |
| // Generate stack overflow check |
| |
| if (UseStackBanging) { |
| __ bang_stack_with_offset(StackShadowPages*os::vm_page_size()); |
| } else { |
| // need a 5 byte instruction to allow MT safe patching to non-entrant |
| __ fat_nop(); |
| } |
| |
| // Generate a new frame for the wrapper. |
| __ enter(); |
| // -2 because return address is already present and so is saved rbp, |
| __ subl(rsp, stack_size - 2*wordSize); |
| |
| // Frame is now completed as far a size and linkage. |
| |
| int frame_complete = ((intptr_t)__ pc()) - start; |
| |
| // Calculate the difference between rsp and rbp,. We need to know it |
| // after the native call because on windows Java Natives will pop |
| // the arguments and it is painful to do rsp relative addressing |
| // in a platform independent way. So after the call we switch to |
| // rbp, relative addressing. |
| |
| int fp_adjustment = stack_size - 2*wordSize; |
| |
| #ifdef COMPILER2 |
| // C2 may leave the stack dirty if not in SSE2+ mode |
| if (UseSSE >= 2) { |
| __ verify_FPU(0, "c2i transition should have clean FPU stack"); |
| } else { |
| __ empty_FPU_stack(); |
| } |
| #endif /* COMPILER2 */ |
| |
| // Compute the rbp, offset for any slots used after the jni call |
| |
| int lock_slot_rbp_offset = (lock_slot_offset*VMRegImpl::stack_slot_size) - fp_adjustment; |
| int oop_temp_slot_rbp_offset = (oop_temp_slot_offset*VMRegImpl::stack_slot_size) - fp_adjustment; |
| |
| // We use rdi as a thread pointer because it is callee save and |
| // if we load it once it is usable thru the entire wrapper |
| const Register thread = rdi; |
| |
| // We use rsi as the oop handle for the receiver/klass |
| // It is callee save so it survives the call to native |
| |
| const Register oop_handle_reg = rsi; |
| |
| __ get_thread(thread); |
| |
| |
| // |
| // We immediately shuffle the arguments so that any vm call we have to |
| // make from here on out (sync slow path, jvmti, etc.) we will have |
| // captured the oops from our caller and have a valid oopMap for |
| // them. |
| |
| // ----------------- |
| // The Grand Shuffle |
| // |
| // Natives require 1 or 2 extra arguments over the normal ones: the JNIEnv* |
| // and, if static, the class mirror instead of a receiver. This pretty much |
| // guarantees that register layout will not match (and x86 doesn't use reg |
| // parms though amd does). Since the native abi doesn't use register args |
| // and the java conventions does we don't have to worry about collisions. |
| // All of our moved are reg->stack or stack->stack. |
| // We ignore the extra arguments during the shuffle and handle them at the |
| // last moment. The shuffle is described by the two calling convention |
| // vectors we have in our possession. We simply walk the java vector to |
| // get the source locations and the c vector to get the destinations. |
| |
| int c_arg = method->is_static() ? 2 : 1 ; |
| |
| // Record rsp-based slot for receiver on stack for non-static methods |
| int receiver_offset = -1; |
| |
| // This is a trick. We double the stack slots so we can claim |
| // the oops in the caller's frame. Since we are sure to have |
| // more args than the caller doubling is enough to make |
| // sure we can capture all the incoming oop args from the |
| // caller. |
| // |
| OopMap* map = new OopMap(stack_slots * 2, 0 /* arg_slots*/); |
| |
| // Mark location of rbp, |
| // map->set_callee_saved(VMRegImpl::stack2reg( stack_slots - 2), stack_slots * 2, 0, rbp->as_VMReg()); |
| |
| // We know that we only have args in at most two integer registers (rcx, rdx). So rax, rbx |
| // Are free to temporaries if we have to do stack to steck moves. |
| // All inbound args are referenced based on rbp, and all outbound args via rsp. |
| |
| for (i = 0; i < total_in_args ; i++, c_arg++ ) { |
| switch (in_sig_bt[i]) { |
| case T_ARRAY: |
| case T_OBJECT: |
| object_move(masm, map, oop_handle_offset, stack_slots, in_regs[i], out_regs[c_arg], |
| ((i == 0) && (!is_static)), |
| &receiver_offset); |
| break; |
| case T_VOID: |
| break; |
| |
| case T_FLOAT: |
| float_move(masm, in_regs[i], out_regs[c_arg]); |
| break; |
| |
| case T_DOUBLE: |
| assert( i + 1 < total_in_args && |
| in_sig_bt[i + 1] == T_VOID && |
| out_sig_bt[c_arg+1] == T_VOID, "bad arg list"); |
| double_move(masm, in_regs[i], out_regs[c_arg]); |
| break; |
| |
| case T_LONG : |
| long_move(masm, in_regs[i], out_regs[c_arg]); |
| break; |
| |
| case T_ADDRESS: assert(false, "found T_ADDRESS in java args"); |
| |
| default: |
| simple_move32(masm, in_regs[i], out_regs[c_arg]); |
| } |
| } |
| |
| // Pre-load a static method's oop into rsi. Used both by locking code and |
| // the normal JNI call code. |
| if (method->is_static()) { |
| |
| // load opp into a register |
| __ movoop(oop_handle_reg, JNIHandles::make_local(Klass::cast(method->method_holder())->java_mirror())); |
| |
| // Now handlize the static class mirror it's known not-null. |
| __ movl(Address(rsp, klass_offset), oop_handle_reg); |
| map->set_oop(VMRegImpl::stack2reg(klass_slot_offset)); |
| |
| // Now get the handle |
| __ leal(oop_handle_reg, Address(rsp, klass_offset)); |
| // store the klass handle as second argument |
| __ movl(Address(rsp, wordSize), oop_handle_reg); |
| } |
| |
| // Change state to native (we save the return address in the thread, since it might not |
| // be pushed on the stack when we do a a stack traversal). It is enough that the pc() |
| // points into the right code segment. It does not have to be the correct return pc. |
| // We use the same pc/oopMap repeatedly when we call out |
| |
| intptr_t the_pc = (intptr_t) __ pc(); |
| oop_maps->add_gc_map(the_pc - start, map); |
| |
| __ set_last_Java_frame(thread, rsp, noreg, (address)the_pc); |
| |
| |
| // We have all of the arguments setup at this point. We must not touch any register |
| // argument registers at this point (what if we save/restore them there are no oop? |
| |
| { |
| SkipIfEqual skip_if(masm, &DTraceMethodProbes, 0); |
| __ movoop(rax, JNIHandles::make_local(method())); |
| __ call_VM_leaf( |
| CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_entry), |
| thread, rax); |
| } |
| |
| |
| // These are register definitions we need for locking/unlocking |
| const Register swap_reg = rax; // Must use rax, for cmpxchg instruction |
| const Register obj_reg = rcx; // Will contain the oop |
| const Register lock_reg = rdx; // Address of compiler lock object (BasicLock) |
| |
| Label slow_path_lock; |
| Label lock_done; |
| |
| // Lock a synchronized method |
| if (method->is_synchronized()) { |
| |
| |
| const int mark_word_offset = BasicLock::displaced_header_offset_in_bytes(); |
| |
| // Get the handle (the 2nd argument) |
| __ movl(oop_handle_reg, Address(rsp, wordSize)); |
| |
| // Get address of the box |
| |
| __ leal(lock_reg, Address(rbp, lock_slot_rbp_offset)); |
| |
| // Load the oop from the handle |
| __ movl(obj_reg, Address(oop_handle_reg, 0)); |
| |
| if (UseBiasedLocking) { |
| // Note that oop_handle_reg is trashed during this call |
| __ biased_locking_enter(lock_reg, obj_reg, swap_reg, oop_handle_reg, false, lock_done, &slow_path_lock); |
| } |
| |
| // Load immediate 1 into swap_reg %rax, |
| __ movl(swap_reg, 1); |
| |
| // Load (object->mark() | 1) into swap_reg %rax, |
| __ orl(swap_reg, Address(obj_reg, 0)); |
| |
| // Save (object->mark() | 1) into BasicLock's displaced header |
| __ movl(Address(lock_reg, mark_word_offset), swap_reg); |
| |
| if (os::is_MP()) { |
| __ lock(); |
| } |
| |
| // src -> dest iff dest == rax, else rax, <- dest |
| // *obj_reg = lock_reg iff *obj_reg == rax, else rax, = *(obj_reg) |
| __ cmpxchg(lock_reg, Address(obj_reg, 0)); |
| __ jcc(Assembler::equal, lock_done); |
| |
| // Test if the oopMark is an obvious stack pointer, i.e., |
| // 1) (mark & 3) == 0, and |
| // 2) rsp <= mark < mark + os::pagesize() |
| // These 3 tests can be done by evaluating the following |
| // expression: ((mark - rsp) & (3 - os::vm_page_size())), |
| // assuming both stack pointer and pagesize have their |
| // least significant 2 bits clear. |
| // NOTE: the oopMark is in swap_reg %rax, as the result of cmpxchg |
| |
| __ subl(swap_reg, rsp); |
| __ andl(swap_reg, 3 - os::vm_page_size()); |
| |
| // Save the test result, for recursive case, the result is zero |
| __ movl(Address(lock_reg, mark_word_offset), swap_reg); |
| __ jcc(Assembler::notEqual, slow_path_lock); |
| // Slow path will re-enter here |
| __ bind(lock_done); |
| |
| if (UseBiasedLocking) { |
| // Re-fetch oop_handle_reg as we trashed it above |
| __ movl(oop_handle_reg, Address(rsp, wordSize)); |
| } |
| } |
| |
| |
| // Finally just about ready to make the JNI call |
| |
| |
| // get JNIEnv* which is first argument to native |
| |
| __ leal(rdx, Address(thread, in_bytes(JavaThread::jni_environment_offset()))); |
| __ movl(Address(rsp, 0), rdx); |
| |
| // Now set thread in native |
| __ movl(Address(thread, JavaThread::thread_state_offset()), _thread_in_native); |
| |
| __ call(RuntimeAddress(method->native_function())); |
| |
| // WARNING - on Windows Java Natives use pascal calling convention and pop the |
| // arguments off of the stack. We could just re-adjust the stack pointer here |
| // and continue to do SP relative addressing but we instead switch to FP |
| // relative addressing. |
| |
| // Unpack native results. |
| switch (ret_type) { |
| case T_BOOLEAN: __ c2bool(rax); break; |
| case T_CHAR : __ andl(rax, 0xFFFF); break; |
| case T_BYTE : __ sign_extend_byte (rax); break; |
| case T_SHORT : __ sign_extend_short(rax); break; |
| case T_INT : /* nothing to do */ break; |
| case T_DOUBLE : |
| case T_FLOAT : |
| // Result is in st0 we'll save as needed |
| break; |
| case T_ARRAY: // Really a handle |
| case T_OBJECT: // Really a handle |
| break; // can't de-handlize until after safepoint check |
| case T_VOID: break; |
| case T_LONG: break; |
| default : ShouldNotReachHere(); |
| } |
| |
| // Switch thread to "native transition" state before reading the synchronization state. |
| // This additional state is necessary because reading and testing the synchronization |
| // state is not atomic w.r.t. GC, as this scenario demonstrates: |
| // Java thread A, in _thread_in_native state, loads _not_synchronized and is preempted. |
| // VM thread changes sync state to synchronizing and suspends threads for GC. |
| // Thread A is resumed to finish this native method, but doesn't block here since it |
| // didn't see any synchronization is progress, and escapes. |
| __ movl(Address(thread, JavaThread::thread_state_offset()), _thread_in_native_trans); |
| |
| if(os::is_MP()) { |
| if (UseMembar) { |
| __ membar(); // Force this write out before the read below |
| } else { |
| // Write serialization page so VM thread can do a pseudo remote membar. |
| // We use the current thread pointer to calculate a thread specific |
| // offset to write to within the page. This minimizes bus traffic |
| // due to cache line collision. |
| __ serialize_memory(thread, rcx); |
| } |
| } |
| |
| if (AlwaysRestoreFPU) { |
| // Make sure the control word is correct. |
| __ fldcw(ExternalAddress(StubRoutines::addr_fpu_cntrl_wrd_std())); |
| } |
| |
| // check for safepoint operation in progress and/or pending suspend requests |
| { Label Continue; |
| |
| __ cmp32(ExternalAddress((address)SafepointSynchronize::address_of_state()), |
| SafepointSynchronize::_not_synchronized); |
| |
| Label L; |
| __ jcc(Assembler::notEqual, L); |
| __ cmpl(Address(thread, JavaThread::suspend_flags_offset()), 0); |
| __ jcc(Assembler::equal, Continue); |
| __ bind(L); |
| |
| // Don't use call_VM as it will see a possible pending exception and forward it |
| // and never return here preventing us from clearing _last_native_pc down below. |
| // Also can't use call_VM_leaf either as it will check to see if rsi & rdi are |
| // preserved and correspond to the bcp/locals pointers. So we do a runtime call |
| // by hand. |
| // |
| save_native_result(masm, ret_type, stack_slots); |
| __ pushl(thread); |
| __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, |
| JavaThread::check_special_condition_for_native_trans))); |
| __ increment(rsp, wordSize); |
| // Restore any method result value |
| restore_native_result(masm, ret_type, stack_slots); |
| |
| __ bind(Continue); |
| } |
| |
| // change thread state |
| __ movl(Address(thread, JavaThread::thread_state_offset()), _thread_in_Java); |
| |
| Label reguard; |
| Label reguard_done; |
| __ cmpl(Address(thread, JavaThread::stack_guard_state_offset()), JavaThread::stack_guard_yellow_disabled); |
| __ jcc(Assembler::equal, reguard); |
| |
| // slow path reguard re-enters here |
| __ bind(reguard_done); |
| |
| // Handle possible exception (will unlock if necessary) |
| |
| // native result if any is live |
| |
| // Unlock |
| Label slow_path_unlock; |
| Label unlock_done; |
| if (method->is_synchronized()) { |
| |
| Label done; |
| |
| // Get locked oop from the handle we passed to jni |
| __ movl(obj_reg, Address(oop_handle_reg, 0)); |
| |
| if (UseBiasedLocking) { |
| __ biased_locking_exit(obj_reg, rbx, done); |
| } |
| |
| // Simple recursive lock? |
| |
| __ cmpl(Address(rbp, lock_slot_rbp_offset), NULL_WORD); |
| __ jcc(Assembler::equal, done); |
| |
| // Must save rax, if if it is live now because cmpxchg must use it |
| if (ret_type != T_FLOAT && ret_type != T_DOUBLE && ret_type != T_VOID) { |
| save_native_result(masm, ret_type, stack_slots); |
| } |
| |
| // get old displaced header |
| __ movl(rbx, Address(rbp, lock_slot_rbp_offset)); |
| |
| // get address of the stack lock |
| __ leal(rax, Address(rbp, lock_slot_rbp_offset)); |
| |
| // Atomic swap old header if oop still contains the stack lock |
| if (os::is_MP()) { |
| __ lock(); |
| } |
| |
| // src -> dest iff dest == rax, else rax, <- dest |
| // *obj_reg = rbx, iff *obj_reg == rax, else rax, = *(obj_reg) |
| __ cmpxchg(rbx, Address(obj_reg, 0)); |
| __ jcc(Assembler::notEqual, slow_path_unlock); |
| |
| // slow path re-enters here |
| __ bind(unlock_done); |
| if (ret_type != T_FLOAT && ret_type != T_DOUBLE && ret_type != T_VOID) { |
| restore_native_result(masm, ret_type, stack_slots); |
| } |
| |
| __ bind(done); |
| |
| } |
| |
| { |
| SkipIfEqual skip_if(masm, &DTraceMethodProbes, 0); |
| // Tell dtrace about this method exit |
| save_native_result(masm, ret_type, stack_slots); |
| __ movoop(rax, JNIHandles::make_local(method())); |
| __ call_VM_leaf( |
| CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_exit), |
| thread, rax); |
| restore_native_result(masm, ret_type, stack_slots); |
| } |
| |
| // We can finally stop using that last_Java_frame we setup ages ago |
| |
| __ reset_last_Java_frame(thread, false, true); |
| |
| // Unpack oop result |
| if (ret_type == T_OBJECT || ret_type == T_ARRAY) { |
| Label L; |
| __ cmpl(rax, NULL_WORD); |
| __ jcc(Assembler::equal, L); |
| __ movl(rax, Address(rax, 0)); |
| __ bind(L); |
| __ verify_oop(rax); |
| } |
| |
| // reset handle block |
| __ movl(rcx, Address(thread, JavaThread::active_handles_offset())); |
| |
| __ movl(Address(rcx, JNIHandleBlock::top_offset_in_bytes()), 0); |
| |
| // Any exception pending? |
| __ cmpl(Address(thread, in_bytes(Thread::pending_exception_offset())), NULL_WORD); |
| __ jcc(Assembler::notEqual, exception_pending); |
| |
| |
| // no exception, we're almost done |
| |
| // check that only result value is on FPU stack |
| __ verify_FPU(ret_type == T_FLOAT || ret_type == T_DOUBLE ? 1 : 0, "native_wrapper normal exit"); |
| |
| // Fixup floating pointer results so that result looks like a return from a compiled method |
| if (ret_type == T_FLOAT) { |
| if (UseSSE >= 1) { |
| // Pop st0 and store as float and reload into xmm register |
| __ fstp_s(Address(rbp, -4)); |
| __ movflt(xmm0, Address(rbp, -4)); |
| } |
| } else if (ret_type == T_DOUBLE) { |
| if (UseSSE >= 2) { |
| // Pop st0 and store as double and reload into xmm register |
| __ fstp_d(Address(rbp, -8)); |
| __ movdbl(xmm0, Address(rbp, -8)); |
| } |
| } |
| |
| // Return |
| |
| __ leave(); |
| __ ret(0); |
| |
| // Unexpected paths are out of line and go here |
| |
| // Slow path locking & unlocking |
| if (method->is_synchronized()) { |
| |
| // BEGIN Slow path lock |
| |
| __ bind(slow_path_lock); |
| |
| // has last_Java_frame setup. No exceptions so do vanilla call not call_VM |
| // args are (oop obj, BasicLock* lock, JavaThread* thread) |
| __ pushl(thread); |
| __ pushl(lock_reg); |
| __ pushl(obj_reg); |
| __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, SharedRuntime::complete_monitor_locking_C))); |
| __ addl(rsp, 3*wordSize); |
| |
| #ifdef ASSERT |
| { Label L; |
| __ cmpl(Address(thread, in_bytes(Thread::pending_exception_offset())), (int)NULL_WORD); |
| __ jcc(Assembler::equal, L); |
| __ stop("no pending exception allowed on exit from monitorenter"); |
| __ bind(L); |
| } |
| #endif |
| __ jmp(lock_done); |
| |
| // END Slow path lock |
| |
| // BEGIN Slow path unlock |
| __ bind(slow_path_unlock); |
| |
| // Slow path unlock |
| |
| if (ret_type == T_FLOAT || ret_type == T_DOUBLE ) { |
| save_native_result(masm, ret_type, stack_slots); |
| } |
| // Save pending exception around call to VM (which contains an EXCEPTION_MARK) |
| |
| __ pushl(Address(thread, in_bytes(Thread::pending_exception_offset()))); |
| __ movl(Address(thread, in_bytes(Thread::pending_exception_offset())), NULL_WORD); |
| |
| |
| // should be a peal |
| // +wordSize because of the push above |
| __ leal(rax, Address(rbp, lock_slot_rbp_offset)); |
| __ pushl(rax); |
| |
| __ pushl(obj_reg); |
| __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, SharedRuntime::complete_monitor_unlocking_C))); |
| __ addl(rsp, 2*wordSize); |
| #ifdef ASSERT |
| { |
| Label L; |
| __ cmpl(Address(thread, in_bytes(Thread::pending_exception_offset())), NULL_WORD); |
| __ jcc(Assembler::equal, L); |
| __ stop("no pending exception allowed on exit complete_monitor_unlocking_C"); |
| __ bind(L); |
| } |
| #endif /* ASSERT */ |
| |
| __ popl(Address(thread, in_bytes(Thread::pending_exception_offset()))); |
| |
| if (ret_type == T_FLOAT || ret_type == T_DOUBLE ) { |
| restore_native_result(masm, ret_type, stack_slots); |
| } |
| __ jmp(unlock_done); |
| // END Slow path unlock |
| |
| } |
| |
| // SLOW PATH Reguard the stack if needed |
| |
| __ bind(reguard); |
| save_native_result(masm, ret_type, stack_slots); |
| { |
| __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, SharedRuntime::reguard_yellow_pages))); |
| } |
| restore_native_result(masm, ret_type, stack_slots); |
| __ jmp(reguard_done); |
| |
| |
| // BEGIN EXCEPTION PROCESSING |
| |
| // Forward the exception |
| __ bind(exception_pending); |
| |
| // remove possible return value from FPU register stack |
| __ empty_FPU_stack(); |
| |
| // pop our frame |
| __ leave(); |
| // and forward the exception |
| __ jump(RuntimeAddress(StubRoutines::forward_exception_entry())); |
| |
| __ flush(); |
| |
| nmethod *nm = nmethod::new_native_nmethod(method, |
| masm->code(), |
| vep_offset, |
| frame_complete, |
| stack_slots / VMRegImpl::slots_per_word, |
| (is_static ? in_ByteSize(klass_offset) : in_ByteSize(receiver_offset)), |
| in_ByteSize(lock_slot_offset*VMRegImpl::stack_slot_size), |
| oop_maps); |
| return nm; |
| |
| } |
| |
| // this function returns the adjust size (in number of words) to a c2i adapter |
| // activation for use during deoptimization |
| int Deoptimization::last_frame_adjust(int callee_parameters, int callee_locals ) { |
| return (callee_locals - callee_parameters) * Interpreter::stackElementWords(); |
| } |
| |
| |
| uint SharedRuntime::out_preserve_stack_slots() { |
| return 0; |
| } |
| |
| |
| //------------------------------generate_deopt_blob---------------------------- |
| void SharedRuntime::generate_deopt_blob() { |
| // allocate space for the code |
| ResourceMark rm; |
| // setup code generation tools |
| CodeBuffer buffer("deopt_blob", 1024, 1024); |
| MacroAssembler* masm = new MacroAssembler(&buffer); |
| int frame_size_in_words; |
| OopMap* map = NULL; |
| // Account for the extra args we place on the stack |
| // by the time we call fetch_unroll_info |
| const int additional_words = 2; // deopt kind, thread |
| |
| OopMapSet *oop_maps = new OopMapSet(); |
| |
| // ------------- |
| // This code enters when returning to a de-optimized nmethod. A return |
| // address has been pushed on the the stack, and return values are in |
| // registers. |
| // If we are doing a normal deopt then we were called from the patched |
| // nmethod from the point we returned to the nmethod. So the return |
| // address on the stack is wrong by NativeCall::instruction_size |
| // We will adjust the value to it looks like we have the original return |
| // address on the stack (like when we eagerly deoptimized). |
| // In the case of an exception pending with deoptimized then we enter |
| // with a return address on the stack that points after the call we patched |
| // into the exception handler. We have the following register state: |
| // rax,: exception |
| // rbx,: exception handler |
| // rdx: throwing pc |
| // So in this case we simply jam rdx into the useless return address and |
| // the stack looks just like we want. |
| // |
| // At this point we need to de-opt. We save the argument return |
| // registers. We call the first C routine, fetch_unroll_info(). This |
| // routine captures the return values and returns a structure which |
| // describes the current frame size and the sizes of all replacement frames. |
| // The current frame is compiled code and may contain many inlined |
| // functions, each with their own JVM state. We pop the current frame, then |
| // push all the new frames. Then we call the C routine unpack_frames() to |
| // populate these frames. Finally unpack_frames() returns us the new target |
| // address. Notice that callee-save registers are BLOWN here; they have |
| // already been captured in the vframeArray at the time the return PC was |
| // patched. |
| address start = __ pc(); |
| Label cont; |
| |
| // Prolog for non exception case! |
| |
| // Save everything in sight. |
| |
| map = RegisterSaver::save_live_registers(masm, additional_words, &frame_size_in_words); |
| // Normal deoptimization |
| __ pushl(Deoptimization::Unpack_deopt); |
| __ jmp(cont); |
| |
| int reexecute_offset = __ pc() - start; |
| |
| // Reexecute case |
| // return address is the pc describes what bci to do re-execute at |
| |
| // No need to update map as each call to save_live_registers will produce identical oopmap |
| (void) RegisterSaver::save_live_registers(masm, additional_words, &frame_size_in_words); |
| |
| __ pushl(Deoptimization::Unpack_reexecute); |
| __ jmp(cont); |
| |
| int exception_offset = __ pc() - start; |
| |
| // Prolog for exception case |
| |
| // all registers are dead at this entry point, except for rax, and |
| // rdx which contain the exception oop and exception pc |
| // respectively. Set them in TLS and fall thru to the |
| // unpack_with_exception_in_tls entry point. |
| |
| __ get_thread(rdi); |
| __ movl(Address(rdi, JavaThread::exception_pc_offset()), rdx); |
| __ movl(Address(rdi, JavaThread::exception_oop_offset()), rax); |
| |
| int exception_in_tls_offset = __ pc() - start; |
| |
| // new implementation because exception oop is now passed in JavaThread |
| |
| // Prolog for exception case |
| // All registers must be preserved because they might be used by LinearScan |
| // Exceptiop oop and throwing PC are passed in JavaThread |
| // tos: stack at point of call to method that threw the exception (i.e. only |
| // args are on the stack, no return address) |
| |
| // make room on stack for the return address |
| // It will be patched later with the throwing pc. The correct value is not |
| // available now because loading it from memory would destroy registers. |
| __ pushl(0); |
| |
| // Save everything in sight. |
| |
| // No need to update map as each call to save_live_registers will produce identical oopmap |
| (void) RegisterSaver::save_live_registers(masm, additional_words, &frame_size_in_words); |
| |
| // Now it is safe to overwrite any register |
| |
| // store the correct deoptimization type |
| __ pushl(Deoptimization::Unpack_exception); |
| |
| // load throwing pc from JavaThread and patch it as the return address |
| // of the current frame. Then clear the field in JavaThread |
| __ get_thread(rdi); |
| __ movl(rdx, Address(rdi, JavaThread::exception_pc_offset())); |
| __ movl(Address(rbp, wordSize), rdx); |
| __ movl(Address(rdi, JavaThread::exception_pc_offset()), NULL_WORD); |
| |
| #ifdef ASSERT |
| // verify that there is really an exception oop in JavaThread |
| __ movl(rax, Address(rdi, JavaThread::exception_oop_offset())); |
| __ verify_oop(rax); |
| |
| // verify that there is no pending exception |
| Label no_pending_exception; |
| __ movl(rax, Address(rdi, Thread::pending_exception_offset())); |
| __ testl(rax, rax); |
| __ jcc(Assembler::zero, no_pending_exception); |
| __ stop("must not have pending exception here"); |
| __ bind(no_pending_exception); |
| #endif |
| |
| __ bind(cont); |
| |
| // Compiled code leaves the floating point stack dirty, empty it. |
| __ empty_FPU_stack(); |
| |
| |
| // Call C code. Need thread and this frame, but NOT official VM entry |
| // crud. We cannot block on this call, no GC can happen. |
| __ get_thread(rcx); |
| __ pushl(rcx); |
| // fetch_unroll_info needs to call last_java_frame() |
| __ set_last_Java_frame(rcx, noreg, noreg, NULL); |
| |
| __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, Deoptimization::fetch_unroll_info))); |
| |
| // Need to have an oopmap that tells fetch_unroll_info where to |
| // find any register it might need. |
| |
| oop_maps->add_gc_map( __ pc()-start, map); |
| |
| // Discard arg to fetch_unroll_info |
| __ popl(rcx); |
| |
| __ get_thread(rcx); |
| __ reset_last_Java_frame(rcx, false, false); |
| |
| // Load UnrollBlock into EDI |
| __ movl(rdi, rax); |
| |
| // Move the unpack kind to a safe place in the UnrollBlock because |
| // we are very short of registers |
| |
| Address unpack_kind(rdi, Deoptimization::UnrollBlock::unpack_kind_offset_in_bytes()); |
| // retrieve the deopt kind from where we left it. |
| __ popl(rax); |
| __ movl(unpack_kind, rax); // save the unpack_kind value |
| |
| Label noException; |
| __ cmpl(rax, Deoptimization::Unpack_exception); // Was exception pending? |
| __ jcc(Assembler::notEqual, noException); |
| __ movl(rax, Address(rcx, JavaThread::exception_oop_offset())); |
| __ movl(rdx, Address(rcx, JavaThread::exception_pc_offset())); |
| __ movl(Address(rcx, JavaThread::exception_oop_offset()), NULL_WORD); |
| __ movl(Address(rcx, JavaThread::exception_pc_offset()), NULL_WORD); |
| |
| __ verify_oop(rax); |
| |
| // Overwrite the result registers with the exception results. |
| __ movl(Address(rsp, RegisterSaver::raxOffset()*wordSize), rax); |
| __ movl(Address(rsp, RegisterSaver::rdxOffset()*wordSize), rdx); |
| |
| __ bind(noException); |
| |
| // Stack is back to only having register save data on the stack. |
| // Now restore the result registers. Everything else is either dead or captured |
| // in the vframeArray. |
| |
| RegisterSaver::restore_result_registers(masm); |
| |
| // All of the register save area has been popped of the stack. Only the |
| // return address remains. |
| |
| // Pop all the frames we must move/replace. |
| // |
| // Frame picture (youngest to oldest) |
| // 1: self-frame (no frame link) |
| // 2: deopting frame (no frame link) |
| // 3: caller of deopting frame (could be compiled/interpreted). |
| // |
| // Note: by leaving the return address of self-frame on the stack |
| // and using the size of frame 2 to adjust the stack |
| // when we are done the return to frame 3 will still be on the stack. |
| |
| // Pop deoptimized frame |
| __ addl(rsp,Address(rdi,Deoptimization::UnrollBlock::size_of_deoptimized_frame_offset_in_bytes())); |
| |
| // sp should be pointing at the return address to the caller (3) |
| |
| // Stack bang to make sure there's enough room for these interpreter frames. |
| if (UseStackBanging) { |
| __ movl(rbx, Address(rdi ,Deoptimization::UnrollBlock::total_frame_sizes_offset_in_bytes())); |
| __ bang_stack_size(rbx, rcx); |
| } |
| |
| // Load array of frame pcs into ECX |
| __ movl(rcx,Address(rdi,Deoptimization::UnrollBlock::frame_pcs_offset_in_bytes())); |
| |
| __ popl(rsi); // trash the old pc |
| |
| // Load array of frame sizes into ESI |
| __ movl(rsi,Address(rdi,Deoptimization::UnrollBlock::frame_sizes_offset_in_bytes())); |
| |
| Address counter(rdi, Deoptimization::UnrollBlock::counter_temp_offset_in_bytes()); |
| |
| __ movl(rbx, Address(rdi, Deoptimization::UnrollBlock::number_of_frames_offset_in_bytes())); |
| __ movl(counter, rbx); |
| |
| // Pick up the initial fp we should save |
| __ movl(rbp, Address(rdi, Deoptimization::UnrollBlock::initial_fp_offset_in_bytes())); |
| |
| // Now adjust the caller's stack to make up for the extra locals |
| // but record the original sp so that we can save it in the skeletal interpreter |
| // frame and the stack walking of interpreter_sender will get the unextended sp |
| // value and not the "real" sp value. |
| |
| Address sp_temp(rdi, Deoptimization::UnrollBlock::sender_sp_temp_offset_in_bytes()); |
| __ movl(sp_temp, rsp); |
| __ subl(rsp, Address(rdi, Deoptimization::UnrollBlock::caller_adjustment_offset_in_bytes())); |
| |
| // Push interpreter frames in a loop |
| Label loop; |
| __ bind(loop); |
| __ movl(rbx, Address(rsi, 0)); // Load frame size |
| #ifdef CC_INTERP |
| __ subl(rbx, 4*wordSize); // we'll push pc and ebp by hand and |
| #ifdef ASSERT |
| __ pushl(0xDEADDEAD); // Make a recognizable pattern |
| __ pushl(0xDEADDEAD); |
| #else /* ASSERT */ |
| __ subl(rsp, 2*wordSize); // skip the "static long no_param" |
| #endif /* ASSERT */ |
| #else /* CC_INTERP */ |
| __ subl(rbx, 2*wordSize); // we'll push pc and rbp, by hand |
| #endif /* CC_INTERP */ |
| __ pushl(Address(rcx, 0)); // save return address |
| __ enter(); // save old & set new rbp, |
| __ subl(rsp, rbx); // Prolog! |
| __ movl(rbx, sp_temp); // sender's sp |
| #ifdef CC_INTERP |
| __ movl(Address(rbp, |
| -(sizeof(BytecodeInterpreter)) + in_bytes(byte_offset_of(BytecodeInterpreter, _sender_sp))), |
| rbx); // Make it walkable |
| #else /* CC_INTERP */ |
| // This value is corrected by layout_activation_impl |
| __ movl(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), NULL_WORD ); |
| __ movl(Address(rbp, frame::interpreter_frame_sender_sp_offset * wordSize), rbx); // Make it walkable |
| #endif /* CC_INTERP */ |
| __ movl(sp_temp, rsp); // pass to next frame |
| __ addl(rsi, 4); // Bump array pointer (sizes) |
| __ addl(rcx, 4); // Bump array pointer (pcs) |
| __ decrement(counter); // decrement counter |
| __ jcc(Assembler::notZero, loop); |
| __ pushl(Address(rcx, 0)); // save final return address |
| |
| // Re-push self-frame |
| __ enter(); // save old & set new rbp, |
| |
| // Return address and rbp, are in place |
| // We'll push additional args later. Just allocate a full sized |
| // register save area |
| __ subl(rsp, (frame_size_in_words-additional_words - 2) * wordSize); |
| |
| // Restore frame locals after moving the frame |
| __ movl(Address(rsp, RegisterSaver::raxOffset()*wordSize), rax); |
| __ movl(Address(rsp, RegisterSaver::rdxOffset()*wordSize), rdx); |
| __ fstp_d(Address(rsp, RegisterSaver::fpResultOffset()*wordSize)); // Pop float stack and store in local |
| if( UseSSE>=2 ) __ movdbl(Address(rsp, RegisterSaver::xmm0Offset()*wordSize), xmm0); |
| if( UseSSE==1 ) __ movflt(Address(rsp, RegisterSaver::xmm0Offset()*wordSize), xmm0); |
| |
| // Set up the args to unpack_frame |
| |
| __ pushl(unpack_kind); // get the unpack_kind value |
| __ get_thread(rcx); |
| __ pushl(rcx); |
| |
| // set last_Java_sp, last_Java_fp |
| __ set_last_Java_frame(rcx, noreg, rbp, NULL); |
| |
| // Call C code. Need thread but NOT official VM entry |
| // crud. We cannot block on this call, no GC can happen. Call should |
| // restore return values to their stack-slots with the new SP. |
| __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, Deoptimization::unpack_frames))); |
| // Set an oopmap for the call site |
| oop_maps->add_gc_map( __ pc()-start, new OopMap( frame_size_in_words, 0 )); |
| |
| // rax, contains the return result type |
| __ pushl(rax); |
| |
| __ get_thread(rcx); |
| __ reset_last_Java_frame(rcx, false, false); |
| |
| // Collect return values |
| __ movl(rax,Address(rsp, (RegisterSaver::raxOffset() + additional_words + 1)*wordSize)); |
| __ movl(rdx,Address(rsp, (RegisterSaver::rdxOffset() + additional_words + 1)*wordSize)); |
| |
| // Clear floating point stack before returning to interpreter |
| __ empty_FPU_stack(); |
| |
| // Check if we should push the float or double return value. |
| Label results_done, yes_double_value; |
| __ cmpl(Address(rsp, 0), T_DOUBLE); |
| __ jcc (Assembler::zero, yes_double_value); |
| __ cmpl(Address(rsp, 0), T_FLOAT); |
| __ jcc (Assembler::notZero, results_done); |
| |
| // return float value as expected by interpreter |
| if( UseSSE>=1 ) __ movflt(xmm0, Address(rsp, (RegisterSaver::xmm0Offset() + additional_words + 1)*wordSize)); |
| else __ fld_d(Address(rsp, (RegisterSaver::fpResultOffset() + additional_words + 1)*wordSize)); |
| __ jmp(results_done); |
| |
| // return double value as expected by interpreter |
| __ bind(yes_double_value); |
| if( UseSSE>=2 ) __ movdbl(xmm0, Address(rsp, (RegisterSaver::xmm0Offset() + additional_words + 1)*wordSize)); |
| else __ fld_d(Address(rsp, (RegisterSaver::fpResultOffset() + additional_words + 1)*wordSize)); |
| |
| __ bind(results_done); |
| |
| // Pop self-frame. |
| __ leave(); // Epilog! |
| |
| // Jump to interpreter |
| __ ret(0); |
| |
| // ------------- |
| // make sure all code is generated |
| masm->flush(); |
| |
| _deopt_blob = DeoptimizationBlob::create( &buffer, oop_maps, 0, exception_offset, reexecute_offset, frame_size_in_words); |
| _deopt_blob->set_unpack_with_exception_in_tls_offset(exception_in_tls_offset); |
| } |
| |
| |
| #ifdef COMPILER2 |
| //------------------------------generate_uncommon_trap_blob-------------------- |
| void SharedRuntime::generate_uncommon_trap_blob() { |
| // allocate space for the code |
| ResourceMark rm; |
| // setup code generation tools |
| CodeBuffer buffer("uncommon_trap_blob", 512, 512); |
| MacroAssembler* masm = new MacroAssembler(&buffer); |
| |
| enum frame_layout { |
| arg0_off, // thread sp + 0 // Arg location for |
| arg1_off, // unloaded_class_index sp + 1 // calling C |
| // The frame sender code expects that rbp will be in the "natural" place and |
| // will override any oopMap setting for it. We must therefore force the layout |
| // so that it agrees with the frame sender code. |
| rbp_off, // callee saved register sp + 2 |
| return_off, // slot for return address sp + 3 |
| framesize |
| }; |
| |
| address start = __ pc(); |
| // Push self-frame. |
| __ subl(rsp, return_off*wordSize); // Epilog! |
| |
| // rbp, is an implicitly saved callee saved register (i.e. the calling |
| // convention will save restore it in prolog/epilog) Other than that |
| // there are no callee save registers no that adapter frames are gone. |
| __ movl(Address(rsp, rbp_off*wordSize),rbp); |
| |
| // Clear the floating point exception stack |
| __ empty_FPU_stack(); |
| |
| // set last_Java_sp |
| __ get_thread(rdx); |
| __ set_last_Java_frame(rdx, noreg, noreg, NULL); |
| |
| // Call C code. Need thread but NOT official VM entry |
| // crud. We cannot block on this call, no GC can happen. Call should |
| // capture callee-saved registers as well as return values. |
| __ movl(Address(rsp, arg0_off*wordSize),rdx); |
| // argument already in ECX |
| __ movl(Address(rsp, arg1_off*wordSize),rcx); |
| __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, Deoptimization::uncommon_trap))); |
| |
| // Set an oopmap for the call site |
| OopMapSet *oop_maps = new OopMapSet(); |
| OopMap* map = new OopMap( framesize, 0 ); |
| // No oopMap for rbp, it is known implicitly |
| |
| oop_maps->add_gc_map( __ pc()-start, map); |
| |
| __ get_thread(rcx); |
| |
| __ reset_last_Java_frame(rcx, false, false); |
| |
| // Load UnrollBlock into EDI |
| __ movl(rdi, rax); |
| |
| // Pop all the frames we must move/replace. |
| // |
| // Frame picture (youngest to oldest) |
| // 1: self-frame (no frame link) |
| // 2: deopting frame (no frame link) |
| // 3: caller of deopting frame (could be compiled/interpreted). |
| |
| // Pop self-frame. We have no frame, and must rely only on EAX and ESP. |
| __ addl(rsp,(framesize-1)*wordSize); // Epilog! |
| |
| // Pop deoptimized frame |
| __ addl(rsp,Address(rdi,Deoptimization::UnrollBlock::size_of_deoptimized_frame_offset_in_bytes())); |
| |
| // sp should be pointing at the return address to the caller (3) |
| |
| // Stack bang to make sure there's enough room for these interpreter frames. |
| if (UseStackBanging) { |
| __ movl(rbx, Address(rdi ,Deoptimization::UnrollBlock::total_frame_sizes_offset_in_bytes())); |
| __ bang_stack_size(rbx, rcx); |
| } |
| |
| |
| // Load array of frame pcs into ECX |
| __ movl(rcx,Address(rdi,Deoptimization::UnrollBlock::frame_pcs_offset_in_bytes())); |
| |
| __ popl(rsi); // trash the pc |
| |
| // Load array of frame sizes into ESI |
| __ movl(rsi,Address(rdi,Deoptimization::UnrollBlock::frame_sizes_offset_in_bytes())); |
| |
| Address counter(rdi, Deoptimization::UnrollBlock::counter_temp_offset_in_bytes()); |
| |
| __ movl(rbx, Address(rdi, Deoptimization::UnrollBlock::number_of_frames_offset_in_bytes())); |
| __ movl(counter, rbx); |
| |
| // Pick up the initial fp we should save |
| __ movl(rbp, Address(rdi, Deoptimization::UnrollBlock::initial_fp_offset_in_bytes())); |
| |
| // Now adjust the caller's stack to make up for the extra locals |
| // but record the original sp so that we can save it in the skeletal interpreter |
| // frame and the stack walking of interpreter_sender will get the unextended sp |
| // value and not the "real" sp value. |
| |
| Address sp_temp(rdi, Deoptimization::UnrollBlock::sender_sp_temp_offset_in_bytes()); |
| __ movl(sp_temp, rsp); |
| __ subl(rsp, Address(rdi, Deoptimization::UnrollBlock::caller_adjustment_offset_in_bytes())); |
| |
| // Push interpreter frames in a loop |
| Label loop; |
| __ bind(loop); |
| __ movl(rbx, Address(rsi, 0)); // Load frame size |
| #ifdef CC_INTERP |
| __ subl(rbx, 4*wordSize); // we'll push pc and ebp by hand and |
| #ifdef ASSERT |
| __ pushl(0xDEADDEAD); // Make a recognizable pattern |
| __ pushl(0xDEADDEAD); // (parm to RecursiveInterpreter...) |
| #else /* ASSERT */ |
| __ subl(rsp, 2*wordSize); // skip the "static long no_param" |
| #endif /* ASSERT */ |
| #else /* CC_INTERP */ |
| __ subl(rbx, 2*wordSize); // we'll push pc and rbp, by hand |
| #endif /* CC_INTERP */ |
| __ pushl(Address(rcx, 0)); // save return address |
| __ enter(); // save old & set new rbp, |
| __ subl(rsp, rbx); // Prolog! |
| __ movl(rbx, sp_temp); // sender's sp |
| #ifdef CC_INTERP |
| __ movl(Address(rbp, |
| -(sizeof(BytecodeInterpreter)) + in_bytes(byte_offset_of(BytecodeInterpreter, _sender_sp))), |
| rbx); // Make it walkable |
| #else /* CC_INTERP */ |
| // This value is corrected by layout_activation_impl |
| __ movl(Address(rbp, frame::interpreter_frame_last_sp_offset * wordSize), NULL_WORD ); |
| __ movl(Address(rbp, frame::interpreter_frame_sender_sp_offset * wordSize), rbx); // Make it walkable |
| #endif /* CC_INTERP */ |
| __ movl(sp_temp, rsp); // pass to next frame |
| __ addl(rsi, 4); // Bump array pointer (sizes) |
| __ addl(rcx, 4); // Bump array pointer (pcs) |
| __ decrement(counter); // decrement counter |
| __ jcc(Assembler::notZero, loop); |
| __ pushl(Address(rcx, 0)); // save final return address |
| |
| // Re-push self-frame |
| __ enter(); // save old & set new rbp, |
| __ subl(rsp, (framesize-2) * wordSize); // Prolog! |
| |
| |
| // set last_Java_sp, last_Java_fp |
| __ get_thread(rdi); |
| __ set_last_Java_frame(rdi, noreg, rbp, NULL); |
| |
| // Call C code. Need thread but NOT official VM entry |
| // crud. We cannot block on this call, no GC can happen. Call should |
| // restore return values to their stack-slots with the new SP. |
| __ movl(Address(rsp,arg0_off*wordSize),rdi); |
| __ movl(Address(rsp,arg1_off*wordSize), Deoptimization::Unpack_uncommon_trap); |
| __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, Deoptimization::unpack_frames))); |
| // Set an oopmap for the call site |
| oop_maps->add_gc_map( __ pc()-start, new OopMap( framesize, 0 ) ); |
| |
| __ get_thread(rdi); |
| __ reset_last_Java_frame(rdi, true, false); |
| |
| // Pop self-frame. |
| __ leave(); // Epilog! |
| |
| // Jump to interpreter |
| __ ret(0); |
| |
| // ------------- |
| // make sure all code is generated |
| masm->flush(); |
| |
| _uncommon_trap_blob = UncommonTrapBlob::create(&buffer, oop_maps, framesize); |
| } |
| #endif // COMPILER2 |
| |
| //------------------------------generate_handler_blob------ |
| // |
| // Generate a special Compile2Runtime blob that saves all registers, |
| // setup oopmap, and calls safepoint code to stop the compiled code for |
| // a safepoint. |
| // |
| static SafepointBlob* generate_handler_blob(address call_ptr, bool cause_return) { |
| |
| // Account for thread arg in our frame |
| const int additional_words = 1; |
| int frame_size_in_words; |
| |
| assert (StubRoutines::forward_exception_entry() != NULL, "must be generated before"); |
| |
| ResourceMark rm; |
| OopMapSet *oop_maps = new OopMapSet(); |
| OopMap* map; |
| |
| // allocate space for the code |
| // setup code generation tools |
| CodeBuffer buffer("handler_blob", 1024, 512); |
| MacroAssembler* masm = new MacroAssembler(&buffer); |
| |
| const Register java_thread = rdi; // callee-saved for VC++ |
| address start = __ pc(); |
| address call_pc = NULL; |
| |
| // If cause_return is true we are at a poll_return and there is |
| // the return address on the stack to the caller on the nmethod |
| // that is safepoint. We can leave this return on the stack and |
| // effectively complete the return and safepoint in the caller. |
| // Otherwise we push space for a return address that the safepoint |
| // handler will install later to make the stack walking sensible. |
| if( !cause_return ) |
| __ pushl(rbx); // Make room for return address (or push it again) |
| |
| map = RegisterSaver::save_live_registers(masm, additional_words, &frame_size_in_words, false); |
| |
| // The following is basically a call_VM. However, we need the precise |
| // address of the call in order to generate an oopmap. Hence, we do all the |
| // work ourselves. |
| |
| // Push thread argument and setup last_Java_sp |
| __ get_thread(java_thread); |
| __ pushl(java_thread); |
| __ set_last_Java_frame(java_thread, noreg, noreg, NULL); |
| |
| // if this was not a poll_return then we need to correct the return address now. |
| if( !cause_return ) { |
| __ movl(rax, Address(java_thread, JavaThread::saved_exception_pc_offset())); |
| __ movl(Address(rbp, wordSize), rax); |
| } |
| |
| // do the call |
| __ call(RuntimeAddress(call_ptr)); |
| |
| // Set an oopmap for the call site. This oopmap will map all |
| // oop-registers and debug-info registers as callee-saved. This |
| // will allow deoptimization at this safepoint to find all possible |
| // debug-info recordings, as well as let GC find all oops. |
| |
| oop_maps->add_gc_map( __ pc() - start, map); |
| |
| // Discard arg |
| __ popl(rcx); |
| |
| Label noException; |
| |
| // Clear last_Java_sp again |
| __ get_thread(java_thread); |
| __ reset_last_Java_frame(java_thread, false, false); |
| |
| __ cmpl(Address(java_thread, Thread::pending_exception_offset()), NULL_WORD); |
| __ jcc(Assembler::equal, noException); |
| |
| // Exception pending |
| |
| RegisterSaver::restore_live_registers(masm); |
| |
| __ jump(RuntimeAddress(StubRoutines::forward_exception_entry())); |
| |
| __ bind(noException); |
| |
| // Normal exit, register restoring and exit |
| RegisterSaver::restore_live_registers(masm); |
| |
| __ ret(0); |
| |
| // make sure all code is generated |
| masm->flush(); |
| |
| // Fill-out other meta info |
| return SafepointBlob::create(&buffer, oop_maps, frame_size_in_words); |
| } |
| |
| // |
| // generate_resolve_blob - call resolution (static/virtual/opt-virtual/ic-miss |
| // |
| // Generate a stub that calls into vm to find out the proper destination |
| // of a java call. All the argument registers are live at this point |
| // but since this is generic code we don't know what they are and the caller |
| // must do any gc of the args. |
| // |
| static RuntimeStub* generate_resolve_blob(address destination, const char* name) { |
| assert (StubRoutines::forward_exception_entry() != NULL, "must be generated before"); |
| |
| // allocate space for the code |
| ResourceMark rm; |
| |
| CodeBuffer buffer(name, 1000, 512); |
| MacroAssembler* masm = new MacroAssembler(&buffer); |
| |
| int frame_size_words; |
| enum frame_layout { |
| thread_off, |
| extra_words }; |
| |
| OopMapSet *oop_maps = new OopMapSet(); |
| OopMap* map = NULL; |
| |
| int start = __ offset(); |
| |
| map = RegisterSaver::save_live_registers(masm, extra_words, &frame_size_words); |
| |
| int frame_complete = __ offset(); |
| |
| const Register thread = rdi; |
| __ get_thread(rdi); |
| |
| __ pushl(thread); |
| __ set_last_Java_frame(thread, noreg, rbp, NULL); |
| |
| __ call(RuntimeAddress(destination)); |
| |
| |
| // Set an oopmap for the call site. |
| // We need this not only for callee-saved registers, but also for volatile |
| // registers that the compiler might be keeping live across a safepoint. |
| |
| oop_maps->add_gc_map( __ offset() - start, map); |
| |
| // rax, contains the address we are going to jump to assuming no exception got installed |
| |
| __ addl(rsp, wordSize); |
| |
| // clear last_Java_sp |
| __ reset_last_Java_frame(thread, true, false); |
| // check for pending exceptions |
| Label pending; |
| __ cmpl(Address(thread, Thread::pending_exception_offset()), NULL_WORD); |
| __ jcc(Assembler::notEqual, pending); |
| |
| // get the returned methodOop |
| __ movl(rbx, Address(thread, JavaThread::vm_result_offset())); |
| __ movl(Address(rsp, RegisterSaver::rbx_offset() * wordSize), rbx); |
| |
| __ movl(Address(rsp, RegisterSaver::rax_offset() * wordSize), rax); |
| |
| RegisterSaver::restore_live_registers(masm); |
| |
| // We are back the the original state on entry and ready to go. |
| |
| __ jmp(rax); |
| |
| // Pending exception after the safepoint |
| |
| __ bind(pending); |
| |
| RegisterSaver::restore_live_registers(masm); |
| |
| // exception pending => remove activation and forward to exception handler |
| |
| __ get_thread(thread); |
| __ movl(Address(thread, JavaThread::vm_result_offset()), NULL_WORD); |
| __ movl(rax, Address(thread, Thread::pending_exception_offset())); |
| __ jump(RuntimeAddress(StubRoutines::forward_exception_entry())); |
| |
| // ------------- |
| // make sure all code is generated |
| masm->flush(); |
| |
| // return the blob |
| // frame_size_words or bytes?? |
| return RuntimeStub::new_runtime_stub(name, &buffer, frame_complete, frame_size_words, oop_maps, true); |
| } |
| |
| void SharedRuntime::generate_stubs() { |
| |
| _wrong_method_blob = generate_resolve_blob(CAST_FROM_FN_PTR(address, SharedRuntime::handle_wrong_method), |
| "wrong_method_stub"); |
| |
| _ic_miss_blob = generate_resolve_blob(CAST_FROM_FN_PTR(address, SharedRuntime::handle_wrong_method_ic_miss), |
| "ic_miss_stub"); |
| |
| _resolve_opt_virtual_call_blob = generate_resolve_blob(CAST_FROM_FN_PTR(address, SharedRuntime::resolve_opt_virtual_call_C), |
| "resolve_opt_virtual_call"); |
| |
| _resolve_virtual_call_blob = generate_resolve_blob(CAST_FROM_FN_PTR(address, SharedRuntime::resolve_virtual_call_C), |
| "resolve_virtual_call"); |
| |
| _resolve_static_call_blob = generate_resolve_blob(CAST_FROM_FN_PTR(address, SharedRuntime::resolve_static_call_C), |
| "resolve_static_call"); |
| |
| _polling_page_safepoint_handler_blob = |
| generate_handler_blob(CAST_FROM_FN_PTR(address, |
| SafepointSynchronize::handle_polling_page_exception), false); |
| |
| _polling_page_return_handler_blob = |
| generate_handler_blob(CAST_FROM_FN_PTR(address, |
| SafepointSynchronize::handle_polling_page_exception), true); |
| |
| generate_deopt_blob(); |
| #ifdef COMPILER2 |
| generate_uncommon_trap_blob(); |
| #endif // COMPILER2 |
| } |