| # |
| # Copyright (c) 1998, 2013, Oracle and/or its affiliates. All rights reserved. |
| # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
| # |
| # This code is free software; you can redistribute it and/or modify it |
| # under the terms of the GNU General Public License version 2 only, as |
| # published by the Free Software Foundation. |
| # |
| # This code is distributed in the hope that it will be useful, but WITHOUT |
| # ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| # FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| # version 2 for more details (a copy is included in the LICENSE file that |
| # accompanied this code). |
| # |
| # You should have received a copy of the GNU General Public License version |
| # 2 along with this work; if not, write to the Free Software Foundation, |
| # Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. |
| # |
| # Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA |
| # or visit www.oracle.com if you need additional information or have any |
| # questions. |
| # |
| # |
| |
| #------------------------------------------------------------------------ |
| # CC, CXX & AS |
| |
| # If a SPEC is not set already, then use these defaults. |
| ifeq ($(SPEC),) |
| CXX = g++ |
| CC = gcc |
| AS = $(CC) -c |
| MCS = /usr/ccs/bin/mcs |
| endif |
| |
| Compiler = gcc |
| |
| # -dumpversion in gcc-2.91 shows "egcs-2.91.66". In later version, it only |
| # prints the numbers (e.g. "2.95", "3.2.1") |
| CC_VER_MAJOR := $(shell $(CC) -dumpversion | sed 's/egcs-//' | cut -d'.' -f1) |
| CC_VER_MINOR := $(shell $(CC) -dumpversion | sed 's/egcs-//' | cut -d'.' -f2) |
| CC_VER_MICRO := $(shell $(CC) -dumpversion | sed 's/egcs-//' | cut -d'.' -f3) |
| |
| # Check for the versions of C++ and C compilers ($CXX and $CC) used. |
| |
| # Get the last thing on the line that looks like x.x+ (x is a digit). |
| COMPILER_REV := \ |
| $(shell $(CXX) -dumpversion | sed 's/egcs-//' | cut -d'.' -f1) |
| CC_COMPILER_REV := \ |
| $(shell $(CC) -dumpversion | sed 's/egcs-//' | cut -d'.' -f2) |
| |
| |
| # check for precompiled headers support |
| ifneq "$(shell expr \( $(CC_VER_MAJOR) \> 3 \) \| \( \( $(CC_VER_MAJOR) = 3 \) \& \( $(CC_VER_MINOR) \>= 4 \) \))" "0" |
| # Allow the user to turn off precompiled headers from the command line. |
| ifneq ($(USE_PRECOMPILED_HEADER),0) |
| PRECOMPILED_HEADER_DIR=. |
| PRECOMPILED_HEADER_SRC=$(GAMMADIR)/src/share/vm/precompiled/precompiled.hpp |
| PRECOMPILED_HEADER=$(PRECOMPILED_HEADER_DIR)/precompiled.hpp.gch |
| endif |
| endif |
| |
| |
| #------------------------------------------------------------------------ |
| # Compiler flags |
| |
| # position-independent code |
| PICFLAG = -fPIC |
| |
| VM_PICFLAG/LIBJVM = $(PICFLAG) |
| VM_PICFLAG/AOUT = |
| VM_PICFLAG = $(VM_PICFLAG/$(LINK_INTO)) |
| |
| CFLAGS += $(VM_PICFLAG) |
| CFLAGS += -fno-rtti |
| CFLAGS += -fno-exceptions |
| CFLAGS += -D_REENTRANT |
| CFLAGS += -fcheck-new |
| |
| ARCHFLAG = $(ARCHFLAG/$(BUILDARCH)) |
| |
| ARCHFLAG/sparc = -m32 -mcpu=v9 |
| ARCHFLAG/sparcv9 = -m64 -mcpu=v9 |
| ARCHFLAG/i486 = -m32 -march=i586 |
| ARCHFLAG/amd64 = -m64 -march=k8 |
| |
| |
| # Optional sub-directory in /usr/lib where BUILDARCH libraries are kept. |
| ISA_DIR=$(ISA_DIR/$(BUILDARCH)) |
| ISA_DIR/amd64=/amd64 |
| ISA_DIR/i486= |
| ISA_DIR/sparcv9=/64 |
| |
| |
| CFLAGS += $(ARCHFLAG) |
| AOUT_FLAGS += $(ARCHFLAG) |
| LFLAGS += $(ARCHFLAG) |
| ASFLAGS += $(ARCHFLAG) |
| |
| ifeq ($(BUILDARCH), amd64) |
| ASFLAGS += -march=k8 -march=amd64 |
| LFLAGS += -march=k8 |
| endif |
| |
| |
| # Use C++ Interpreter |
| ifdef CC_INTERP |
| CFLAGS += -DCC_INTERP |
| endif |
| |
| # Keep temporary files (.ii, .s) |
| ifdef NEED_ASM |
| CFLAGS += -save-temps |
| else |
| CFLAGS += -pipe |
| endif |
| |
| |
| # Compiler warnings are treated as errors |
| WARNINGS_ARE_ERRORS = -Werror |
| |
| # Enable these warnings. See 'info gcc' about details on these options |
| WARNING_FLAGS = -Wpointer-arith -Wconversion -Wsign-compare -Wundef -Wformat=2 |
| CFLAGS_WARN/DEFAULT = $(WARNINGS_ARE_ERRORS) $(WARNING_FLAGS) |
| |
| # Special cases |
| CFLAGS_WARN/BYFILE = $(CFLAGS_WARN/$@)$(CFLAGS_WARN/DEFAULT$(CFLAGS_WARN/$@)) |
| |
| # optimization control flags (Used by fastdebug and release variants) |
| OPT_CFLAGS/NOOPT=-O0 |
| OPT_CFLAGS/DEBUG=-O0 |
| OPT_CFLAGS/SIZE=-Os |
| OPT_CFLAGS/SPEED=-O3 |
| |
| OPT_CFLAGS_DEFAULT ?= SPEED |
| |
| # Hotspot uses very unstrict aliasing turn this optimization off |
| # This option is added to CFLAGS rather than OPT_CFLAGS |
| # so that OPT_CFLAGS overrides get this option too. |
| CFLAGS += -fno-strict-aliasing |
| |
| ifdef OPT_CFLAGS |
| ifneq ("$(origin OPT_CFLAGS)", "command line") |
| $(error " Use OPT_EXTRAS instead of OPT_CFLAGS to add extra flags to OPT_CFLAGS.") |
| endif |
| endif |
| |
| OPT_CFLAGS = $(OPT_CFLAGS/$(OPT_CFLAGS_DEFAULT)) $(OPT_EXTRAS) |
| |
| # The gcc compiler segv's on ia64 when compiling bytecodeInterpreter.cpp |
| # if we use expensive-optimizations |
| # Note: all ia64 setting reflect the ones for linux |
| # No actial testing was performed: there is no Solaris on ia64 presently |
| ifeq ($(BUILDARCH), ia64) |
| OPT_CFLAGS/bytecodeInterpreter.o += -fno-expensive-optimizations |
| endif |
| |
| # Work around some compiler bugs. |
| ifeq ($(USE_CLANG), true) |
| ifeq ($(shell expr $(CC_VER_MAJOR) = 4 \& $(CC_VER_MINOR) = 2), 1) |
| OPT_CFLAGS/loopTransform.o += $(OPT_CFLAGS/NOOPT) |
| endif |
| else |
| # Do not allow GCC 4.1.1 |
| ifeq ($(shell expr $(CC_VER_MAJOR) = 4 \& $(CC_VER_MINOR) = 1 \& $(CC_VER_MICRO) = 1), 1) |
| $(error "GCC $(CC_VER_MAJOR).$(CC_VER_MINOR).$(CC_VER_MICRO) not supported because of https://gcc.gnu.org/bugzilla/show_bug.cgi?id=27724") |
| endif |
| # 6835796. Problem in GCC 4.3.0 with mulnode.o optimized compilation. |
| ifeq ($(shell expr $(CC_VER_MAJOR) = 4 \& $(CC_VER_MINOR) = 3), 1) |
| OPT_CFLAGS/mulnode.o += $(OPT_CFLAGS/NOOPT) |
| endif |
| endif |
| |
| # Flags for generating make dependency flags. |
| ifneq ($(CC_VER_MAJOR), 2) |
| DEPFLAGS = -fpch-deps -MMD -MP -MF $(DEP_DIR)/$(@:%=%.d) |
| endif |
| |
| # -DDONT_USE_PRECOMPILED_HEADER will exclude all includes in precompiled.hpp. |
| ifeq ($(USE_PRECOMPILED_HEADER),0) |
| CFLAGS += -DDONT_USE_PRECOMPILED_HEADER |
| endif |
| |
| #------------------------------------------------------------------------ |
| # Linker flags |
| |
| # statically link libstdc++.so, work with gcc but ignored by g++ |
| STATIC_STDCXX = -Wl,-Bstatic -lstdc++ -Wl,-Bdynamic |
| |
| |
| ifdef USE_GNULD |
| # statically link libgcc and/or libgcc_s, libgcc does not exist before gcc-3.x. |
| ifneq ($(CC_VER_MAJOR), 2) |
| STATIC_LIBGCC += -static-libgcc |
| endif |
| |
| # Enable linker optimization |
| LFLAGS += -Xlinker -O1 |
| |
| ifneq (, findstring(debug,$(BUILD_FLAVOR))) |
| # for relocations read-only |
| LFLAGS += -Xlinker -z -Xlinker relro |
| |
| ifeq ($(BUILD_FLAVOR), debug) |
| # disable incremental relocations linking |
| LFLAGS += -Xlinker -z -Xlinker now |
| endif |
| endif |
| |
| ifeq ($(BUILDARCH), ia64) |
| # Note: all ia64 setting reflect the ones for linux |
| # No actual testing was performed: there is no Solaris on ia64 presently |
| LFLAGS += -Wl,-relax |
| endif |
| |
| # Use $(MAPFLAG:FILENAME=real_file_name) to specify a map file. |
| MAPFLAG = -Xlinker --version-script=FILENAME |
| else |
| MAPFLAG = -Xlinker -M -Xlinker FILENAME |
| endif |
| |
| # Use $(SONAMEFLAG:SONAME=soname) to specify the intrinsic name of a shared obj |
| SONAMEFLAG = -Xlinker -soname=SONAME |
| |
| # Build shared library |
| SHARED_FLAG = -shared |
| |
| #------------------------------------------------------------------------ |
| # Debug flags |
| |
| # Allow no optimizations. |
| DEBUG_CFLAGS=-O0 |
| |
| # Enable debug symbols |
| DEBUG_CFLAGS += -g |
| |
| # Enable bounds checking. |
| ifeq "$(shell expr \( $(CC_VER_MAJOR) \> 3 \) )" "1" |
| # stack smashing checks. |
| DEBUG_CFLAGS += -fstack-protector-all --param ssp-buffer-size=1 |
| endif |