| /* |
| * Copyright (c) 2009, 2013, Oracle and/or its affiliates. All rights reserved. |
| * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
| * |
| * This code is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 only, as |
| * published by the Free Software Foundation. Oracle designates this |
| * particular file as subject to the "Classpath" exception as provided |
| * by Oracle in the LICENSE file that accompanied this code. |
| * |
| * This code is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * version 2 for more details (a copy is included in the LICENSE file that |
| * accompanied this code). |
| * |
| * You should have received a copy of the GNU General Public License version |
| * 2 along with this work; if not, write to the Free Software Foundation, |
| * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. |
| * |
| * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA |
| * or visit www.oracle.com if you need additional information or have any |
| * questions. |
| */ |
| package com.sun.nio.sctp; |
| |
| import java.net.SocketAddress; |
| import java.net.InetAddress; |
| import java.io.IOException; |
| import java.util.Set; |
| import java.nio.ByteBuffer; |
| import java.nio.channels.spi.AbstractSelectableChannel; |
| import java.nio.channels.spi.SelectorProvider; |
| import java.nio.channels.ClosedChannelException; |
| import java.nio.channels.SelectionKey; |
| |
| /** |
| * A selectable channel for message-oriented connected SCTP sockets. |
| * |
| * <P> An SCTP channel can only control one SCTP association. |
| * An {@code SCTPChannel} is created by invoking one of the |
| * {@link #open open} methods of this class. A newly-created channel is open but |
| * not yet connected, that is, there is no association setup with a remote peer. |
| * An attempt to invoke an I/O operation upon an unconnected |
| * channel will cause a {@link java.nio.channels.NotYetConnectedException} to be |
| * thrown. An association can be setup by connecting the channel using one of |
| * its {@link #connect connect} methods. Once connected, the channel remains |
| * connected until it is closed. Whether or not a channel is connected may be |
| * determined by invoking {@link #getRemoteAddresses getRemoteAddresses}. |
| * |
| * <p> SCTP channels support <i>non-blocking connection:</i> A |
| * channel may be created and the process of establishing the link to |
| * the remote socket may be initiated via the {@link #connect connect} method |
| * for later completion by the {@link #finishConnect finishConnect} method. |
| * Whether or not a connection operation is in progress may be determined by |
| * invoking the {@link #isConnectionPending isConnectionPending} method. |
| * |
| * <p> Socket options are configured using the |
| * {@link #setOption(SctpSocketOption,Object) setOption} method. An SCTP |
| * channel support the following options: |
| * <blockquote> |
| * <table border summary="Socket options"> |
| * <tr> |
| * <th>Option Name</th> |
| * <th>Description</th> |
| * </tr> |
| * <tr> |
| * <td> {@link SctpStandardSocketOptions#SCTP_DISABLE_FRAGMENTS |
| * SCTP_DISABLE_FRAGMENTS} </td> |
| * <td> Enables or disables message fragmentation </td> |
| * </tr> |
| * <tr> |
| * <td> {@link SctpStandardSocketOptions#SCTP_EXPLICIT_COMPLETE |
| * SCTP_EXPLICIT_COMPLETE} </td> |
| * <td> Enables or disables explicit message completion </td> |
| * </tr> |
| * <tr> |
| * <td> {@link SctpStandardSocketOptions#SCTP_FRAGMENT_INTERLEAVE |
| * SCTP_FRAGMENT_INTERLEAVE} </td> |
| * <td> Controls how the presentation of messages occur for the message |
| * receiver </td> |
| * </tr> |
| * <tr> |
| * <td> {@link SctpStandardSocketOptions#SCTP_INIT_MAXSTREAMS |
| * SCTP_INIT_MAXSTREAMS} </td> |
| * <td> The maximum number of streams requested by the local endpoint during |
| * association initialization </td> |
| * </tr> |
| * <tr> |
| * <td> {@link SctpStandardSocketOptions#SCTP_NODELAY SCTP_NODELAY} </td> |
| * <td> Enables or disable a Nagle-like algorithm </td> |
| * </tr> |
| * <tr> |
| * <td> {@link SctpStandardSocketOptions#SCTP_PRIMARY_ADDR |
| * SCTP_PRIMARY_ADDR} </td> |
| * <td> Requests that the local SCTP stack use the given peer address as the |
| * association primary </td> |
| * </tr> |
| * <tr> |
| * <td> {@link SctpStandardSocketOptions#SCTP_SET_PEER_PRIMARY_ADDR |
| * SCTP_SET_PEER_PRIMARY_ADDR} </td> |
| * <td> Requests that the peer mark the enclosed address as the association |
| * primary </td> |
| * </tr> |
| * <tr> |
| * <td> {@link SctpStandardSocketOptions#SO_SNDBUF |
| * SO_SNDBUF} </td> |
| * <td> The size of the socket send buffer </td> |
| * </tr> |
| * <tr> |
| * <td> {@link SctpStandardSocketOptions#SO_RCVBUF |
| * SO_RCVBUF} </td> |
| * <td> The size of the socket receive buffer </td> |
| * </tr> |
| * <tr> |
| * <td> {@link SctpStandardSocketOptions#SO_LINGER |
| * SO_LINGER} </td> |
| * <td> Linger on close if data is present (when configured in blocking mode |
| * only) </td> |
| * </tr> |
| * </table> |
| * </blockquote> |
| * Additional (implementation specific) options may also be supported. The list |
| * of options supported is obtained by invoking the {@link #supportedOptions() |
| * supportedOptions} method. |
| * |
| * <p> SCTP channels are safe for use by multiple concurrent threads. |
| * They support concurrent reading and writing, though at most one thread may be |
| * reading and at most one thread may be writing at any given time. The |
| * {@link #connect connect} and {@link #finishConnect |
| * finishConnect} methods are mutually synchronized against each other, and |
| * an attempt to initiate a send or receive operation while an invocation of one |
| * of these methods is in progress will block until that invocation is complete. |
| * |
| * @since 1.7 |
| */ |
| public abstract class SctpChannel |
| extends AbstractSelectableChannel |
| { |
| /** |
| * Initializes a new instance of this class. |
| * |
| * @param provider |
| * The selector provider for this channel |
| */ |
| protected SctpChannel(SelectorProvider provider) { |
| super(provider); |
| } |
| |
| /** |
| * Opens an SCTP channel. |
| * |
| * <P> The new channel is unbound and unconnected. |
| * |
| * @return A new SCTP channel |
| * |
| * @throws UnsupportedOperationException |
| * If the SCTP protocol is not supported |
| * |
| * @throws IOException |
| * If an I/O error occurs |
| */ |
| public static SctpChannel open() throws |
| IOException { |
| return new sun.nio.ch.sctp.SctpChannelImpl((SelectorProvider)null); |
| } |
| |
| /** |
| * Opens an SCTP channel and connects it to a remote address. |
| * |
| * <P> This is a convenience method and is equivalent to evaluating the |
| * following expression: |
| * <blockquote><pre> |
| * open().connect(remote, maxOutStreams, maxInStreams); |
| * </pre></blockquote> |
| * |
| * @param remote |
| * The remote address to which the new channel is to be connected |
| * |
| * @param maxOutStreams |
| * The number of streams that the application wishes to be able |
| * to send to. Must be non negative and no larger than {@code 65536}. |
| * {@code 0} to use the endpoints default value. |
| * |
| * @param maxInStreams |
| * The maximum number of inbound streams the application is prepared |
| * to support. Must be non negative and no larger than {@code 65536}. |
| * {@code 0} to use the endpoints default value. |
| * |
| * @return A new SCTP channel connected to the given address |
| * |
| * @throws java.nio.channels.AsynchronousCloseException |
| * If another thread closes this channel |
| * while the connect operation is in progress |
| * |
| * @throws java.nio.channels.ClosedByInterruptException |
| * If another thread interrupts the current thread |
| * while the connect operation is in progress, thereby |
| * closing the channel and setting the current thread's |
| * interrupt status |
| * |
| * @throws java.nio.channels.UnresolvedAddressException |
| * If the given remote address is not fully resolved |
| * |
| * @throws java.nio.channels.UnsupportedAddressTypeException |
| * If the type of the given remote address is not supported |
| * |
| * @throws SecurityException |
| * If a security manager has been installed |
| * and it does not permit access to the given remote peer |
| * |
| * @throws UnsupportedOperationException |
| * If the SCTP protocol is not supported |
| * |
| * @throws IOException |
| * If some other I/O error occurs |
| */ |
| public static SctpChannel open(SocketAddress remote, int maxOutStreams, |
| int maxInStreams) throws IOException { |
| SctpChannel ssc = SctpChannel.open(); |
| ssc.connect(remote, maxOutStreams, maxInStreams); |
| return ssc; |
| } |
| |
| /** |
| * Returns the association on this channel's socket. |
| * |
| * @return the association, or {@code null} if the channel's socket is not |
| * connected. |
| * |
| * @throws ClosedChannelException |
| * If the channel is closed |
| * |
| * @throws IOException |
| * If some other I/O error occurs |
| */ |
| public abstract Association association() throws IOException; |
| |
| /** |
| * Binds the channel's socket to a local address. |
| * |
| * <P> This method is used to establish a relationship between the socket |
| * and the local addresses. Once a relationship is established then |
| * the socket remains bound until the channel is closed. This relationship |
| * may not necesssarily be with the address {@code local} as it may be removed |
| * by {@link #unbindAddress unbindAddress}, but there will always be at least |
| * one local address bound to the channel's socket once an invocation of |
| * this method successfully completes. |
| * |
| * <P> Once the channel's socket has been successfully bound to a specific |
| * address, that is not automatically assigned, more addresses |
| * may be bound to it using {@link #bindAddress bindAddress}, or removed |
| * using {@link #unbindAddress unbindAddress}. |
| * |
| * @param local |
| * The local address to bind the socket, or {@code null} to |
| * bind the socket to an automatically assigned socket address |
| * |
| * @return This channel |
| * |
| * @throws java.nio.channels.AlreadyConnectedException |
| * If this channel is already connected |
| * |
| * @throws java.nio.channels.ClosedChannelException |
| * If this channel is closed |
| * |
| * @throws java.nio.channels.ConnectionPendingException |
| * If a non-blocking connection operation is already in progress on this channel |
| * |
| * @throws java.nio.channels.AlreadyBoundException |
| * If this channel is already bound |
| * |
| * @throws java.nio.channels.UnsupportedAddressTypeException |
| * If the type of the given address is not supported |
| * |
| * @throws IOException |
| * If some other I/O error occurs |
| * |
| * @throws SecurityException |
| * If a security manager has been installed and its |
| * {@link SecurityManager#checkListen checkListen} method denies |
| * the operation |
| */ |
| public abstract SctpChannel bind(SocketAddress local) |
| throws IOException; |
| |
| /** |
| * Adds the given address to the bound addresses for the channel's |
| * socket. |
| * |
| * <P> The given address must not be the {@link |
| * java.net.InetAddress#isAnyLocalAddress wildcard} address. |
| * The channel must be first bound using {@link #bind bind} before |
| * invoking this method, otherwise {@link |
| * java.nio.channels.NotYetBoundException} is thrown. The {@link #bind bind} |
| * method takes a {@code SocketAddress} as its argument which typically |
| * contains a port number as well as an address. Addresses subquently bound |
| * using this method are simply addresses as the SCTP port number remains |
| * the same for the lifetime of the channel. |
| * |
| * <P> Adding addresses to a connected association is optional functionality. |
| * If the endpoint supports dynamic address reconfiguration then it may |
| * send the appropriate message to the peer to change the peers address |
| * lists. |
| * |
| * @param address |
| * The address to add to the bound addresses for the socket |
| * |
| * @return This channel |
| * |
| * @throws java.nio.channels.ClosedChannelException |
| * If this channel is closed |
| * |
| * @throws java.nio.channels.ConnectionPendingException |
| * If a non-blocking connection operation is already in progress on |
| * this channel |
| * |
| * @throws java.nio.channels.NotYetBoundException |
| * If this channel is not yet bound |
| * |
| * @throws java.nio.channels.AlreadyBoundException |
| * If this channel is already bound to the given address |
| * |
| * @throws IllegalArgumentException |
| * If address is {@code null} or the {@link |
| * java.net.InetAddress#isAnyLocalAddress wildcard} address |
| * |
| * @throws IOException |
| * If some other I/O error occurs |
| */ |
| public abstract SctpChannel bindAddress(InetAddress address) |
| throws IOException; |
| |
| /** |
| * Removes the given address from the bound addresses for the channel's |
| * socket. |
| * |
| * <P> The given address must not be the {@link |
| * java.net.InetAddress#isAnyLocalAddress wildcard} address. |
| * The channel must be first bound using {@link #bind bind} before |
| * invoking this method, otherwise {@link java.nio.channels.NotYetBoundException} |
| * is thrown. If this method is invoked on a channel that does not have |
| * {@code address} as one of its bound addresses or that has only one |
| * local address bound to it, then this method throws |
| * {@link IllegalUnbindException}. |
| * The initial address that the channel's socket is bound to using {@link |
| * #bind bind} may be removed from the bound addresses for the channel's socket. |
| * |
| * <P> Removing addresses from a connected association is optional |
| * functionality. If the endpoint supports dynamic address reconfiguration |
| * then it may send the appropriate message to the peer to change the peers |
| * address lists. |
| * |
| * @param address |
| * The address to remove from the bound addresses for the socket |
| * |
| * @return This channel |
| * |
| * @throws java.nio.channels.ClosedChannelException |
| * If this channel is closed |
| * |
| * @throws java.nio.channels.ConnectionPendingException |
| * If a non-blocking connection operation is already in progress on |
| * this channel |
| * |
| * @throws java.nio.channels.NotYetBoundException |
| * If this channel is not yet bound |
| * |
| * @throws IllegalArgumentException |
| * If address is {@code null} or the {@link |
| * java.net.InetAddress#isAnyLocalAddress wildcard} address |
| * |
| * @throws IllegalUnbindException |
| * If {@code address} is not bound to the channel's socket. or |
| * the channel has only one address bound to it |
| * |
| * @throws IOException |
| * If some other I/O error occurs |
| */ |
| public abstract SctpChannel unbindAddress(InetAddress address) |
| throws IOException; |
| |
| /** |
| * Connects this channel's socket. |
| * |
| * <P> If this channel is in non-blocking mode then an invocation of this |
| * method initiates a non-blocking connection operation. If the connection |
| * is established immediately, as can happen with a local connection, then |
| * this method returns {@code true}. Otherwise this method returns |
| * {@code false} and the connection operation must later be completed by |
| * invoking the {@link #finishConnect finishConnect} method. |
| * |
| * <P> If this channel is in blocking mode then an invocation of this |
| * method will block until the connection is established or an I/O error |
| * occurs. |
| * |
| * <P> If a security manager has been installed then this method verifies |
| * that its {@link java.lang.SecurityManager#checkConnect checkConnect} |
| * method permits connecting to the address and port number of the given |
| * remote peer. |
| * |
| * <p> This method may be invoked at any time. If a {@link #send send} or |
| * {@link #receive receive} operation upon this channel is invoked while an |
| * invocation of this method is in progress then that operation will first |
| * block until this invocation is complete. If a connection attempt is |
| * initiated but fails, that is, if an invocation of this method throws a |
| * checked exception, then the channel will be closed. |
| * |
| * @param remote |
| * The remote peer to which this channel is to be connected |
| * |
| * @return {@code true} if a connection was established, {@code false} if |
| * this channel is in non-blocking mode and the connection |
| * operation is in progress |
| * |
| * @throws java.nio.channels.AlreadyConnectedException |
| * If this channel is already connected |
| * |
| * @throws java.nio.channels.ConnectionPendingException |
| * If a non-blocking connection operation is already in progress on |
| * this channel |
| * |
| * @throws java.nio.channels.ClosedChannelException |
| * If this channel is closed |
| * |
| * @throws java.nio.channels.AsynchronousCloseException |
| * If another thread closes this channel |
| * while the connect operation is in progress |
| * |
| * @throws java.nio.channels.ClosedByInterruptException |
| * If another thread interrupts the current thread |
| * while the connect operation is in progress, thereby |
| * closing the channel and setting the current thread's |
| * interrupt status |
| * |
| * @throws java.nio.channels.UnresolvedAddressException |
| * If the given remote address is not fully resolved |
| * |
| * @throws java.nio.channels.UnsupportedAddressTypeException |
| * If the type of the given remote address is not supported |
| * |
| * @throws SecurityException |
| * If a security manager has been installed |
| * and it does not permit access to the given remote peer |
| * |
| * @throws IOException |
| * If some other I/O error occurs |
| */ |
| public abstract boolean connect(SocketAddress remote) throws IOException; |
| |
| /** |
| * Connects this channel's socket. |
| * |
| * <P> This is a convience method and is equivalent to evaluating the |
| * following expression: |
| * <blockquote><pre> |
| * setOption(SctpStandardSocketOptions.SCTP_INIT_MAXSTREAMS, SctpStandardSocketOption.InitMaxStreams.create(maxInStreams, maxOutStreams)) |
| * .connect(remote); |
| * </pre></blockquote> |
| * |
| * <P> The {@code maxOutStreams} and {@code maxInStreams} parameters |
| * represent the maximum number of streams that the application wishes to be |
| * able to send to and receive from. They are negotiated with the remote |
| * peer and may be limited by the operating system. |
| * |
| * @param remote |
| * The remote peer to which this channel is to be connected |
| * |
| * @param maxOutStreams |
| * Must be non negative and no larger than {@code 65536}. |
| * {@code 0} to use the endpoints default value. |
| * |
| * @param maxInStreams |
| * Must be non negative and no larger than {@code 65536}. |
| * {@code 0} to use the endpoints default value. |
| * |
| * @return {@code true} if a connection was established, {@code false} if |
| * this channel is in non-blocking mode and the connection operation |
| * is in progress |
| * |
| * @throws java.nio.channels.AlreadyConnectedException |
| * If this channel is already connected |
| * |
| * @throws java.nio.channels.ConnectionPendingException |
| * If a non-blocking connection operation is already in progress on |
| * this channel |
| * |
| * @throws java.nio.channels.ClosedChannelException |
| * If this channel is closed |
| * |
| * @throws java.nio.channels.AsynchronousCloseException |
| * If another thread closes this channel |
| * while the connect operation is in progress |
| * |
| * @throws java.nio.channels.ClosedByInterruptException |
| * If another thread interrupts the current thread |
| * while the connect operation is in progress, thereby |
| * closing the channel and setting the current thread's |
| * interrupt status |
| * |
| * @throws java.nio.channels.UnresolvedAddressException |
| * If the given remote address is not fully resolved |
| * |
| * @throws java.nio.channels.UnsupportedAddressTypeException |
| * If the type of the given remote address is not supported |
| * |
| * @throws SecurityException |
| * If a security manager has been installed |
| * and it does not permit access to the given remote peer |
| * |
| * @throws IOException |
| * If some other I/O error occurs |
| */ |
| public abstract boolean connect(SocketAddress remote, |
| int maxOutStreams, |
| int maxInStreams) |
| throws IOException; |
| |
| /** |
| * Tells whether or not a connection operation is in progress on this channel. |
| * |
| * @return {@code true} if, and only if, a connection operation has been initiated |
| * on this channel but not yet completed by invoking the |
| * {@link #finishConnect} method |
| */ |
| public abstract boolean isConnectionPending(); |
| |
| /** |
| * Finishes the process of connecting an SCTP channel. |
| * |
| * <P> A non-blocking connection operation is initiated by placing a socket |
| * channel in non-blocking mode and then invoking one of its {@link #connect |
| * connect} methods. Once the connection is established, or the attempt has |
| * failed, the channel will become connectable and this method may |
| * be invoked to complete the connection sequence. If the connection |
| * operation failed then invoking this method will cause an appropriate |
| * {@link java.io.IOException} to be thrown. |
| * |
| * <P> If this channel is already connected then this method will not block |
| * and will immediately return {@code true}. If this channel is in |
| * non-blocking mode then this method will return {@code false} if the |
| * connection process is not yet complete. If this channel is in blocking |
| * mode then this method will block until the connection either completes |
| * or fails, and will always either return {@code true} or throw a checked |
| * exception describing the failure. |
| * |
| * <P> This method may be invoked at any time. If a {@link #send send} or {@link #receive receive} |
| * operation upon this channel is invoked while an invocation of this |
| * method is in progress then that operation will first block until this |
| * invocation is complete. If a connection attempt fails, that is, if an |
| * invocation of this method throws a checked exception, then the channel |
| * will be closed. |
| * |
| * @return {@code true} if, and only if, this channel's socket is now |
| * connected |
| * |
| * @throws java.nio.channels.NoConnectionPendingException |
| * If this channel is not connected and a connection operation |
| * has not been initiated |
| * |
| * @throws java.nio.channels.ClosedChannelException |
| * If this channel is closed |
| * |
| * @throws java.nio.channels.AsynchronousCloseException |
| * If another thread closes this channel |
| * while the connect operation is in progress |
| * |
| * @throws java.nio.channels.ClosedByInterruptException |
| * If another thread interrupts the current thread |
| * while the connect operation is in progress, thereby |
| * closing the channel and setting the current thread's |
| * interrupt status |
| * |
| * @throws IOException |
| * If some other I/O error occurs |
| */ |
| public abstract boolean finishConnect() throws IOException; |
| |
| /** |
| * Returns all of the socket addresses to which this channel's socket is |
| * bound. |
| * |
| * @return All the socket addresses that this channel's socket is |
| * bound to, or an empty {@code Set} if the channel's socket is not |
| * bound |
| * |
| * @throws ClosedChannelException |
| * If the channel is closed |
| * |
| * @throws IOException |
| * If an I/O error occurs |
| */ |
| public abstract Set<SocketAddress> getAllLocalAddresses() |
| throws IOException; |
| |
| /** |
| * Returns all of the remote addresses to which this channel's socket |
| * is connected. |
| * |
| * <P> If the channel is connected to a remote peer that is bound to |
| * multiple addresses then it is these addresses that the channel's socket |
| * is connected. |
| * |
| * @return All of the remote addresses to which this channel's socket |
| * is connected, or an empty {@code Set} if the channel's socket is |
| * not connected |
| * |
| * @throws ClosedChannelException |
| * If the channel is closed |
| * |
| * @throws IOException |
| * If an I/O error occurs |
| */ |
| public abstract Set<SocketAddress> getRemoteAddresses() |
| throws IOException; |
| |
| /** |
| * Shutdown a connection without closing the channel. |
| * |
| * <P> Sends a shutdown command to the remote peer, effectively preventing |
| * any new data from being written to the socket by either peer. Further |
| * sends will throw {@link java.nio.channels.ClosedChannelException}. The |
| * channel remains open to allow the for any data (and notifications) to be |
| * received that may have been sent by the peer before it received the |
| * shutdown command. If the channel is already shutdown then invoking this |
| * method has no effect. |
| * |
| * @return This channel |
| * |
| * @throws java.nio.channels.NotYetConnectedException |
| * If this channel is not yet connected |
| * |
| * @throws java.nio.channels.ClosedChannelException |
| * If this channel is closed |
| * |
| * @throws IOException |
| * If some other I/O error occurs |
| */ |
| public abstract SctpChannel shutdown() throws IOException; |
| |
| /** |
| * Returns the value of a socket option. |
| * |
| * @param <T> |
| * The type of the socket option value |
| * |
| * @param name |
| * The socket option |
| * |
| * @return The value of the socket option. A value of {@code null} may be |
| * a valid value for some socket options. |
| * |
| * @throws UnsupportedOperationException |
| * If the socket option is not supported by this channel |
| * |
| * @throws ClosedChannelException |
| * If this channel is closed |
| * |
| * @throws IOException |
| * If an I/O error occurs |
| * |
| * @see SctpStandardSocketOptions |
| */ |
| public abstract <T> T getOption(SctpSocketOption<T> name) |
| throws IOException; |
| |
| /** |
| * Sets the value of a socket option. |
| * |
| * @param <T> |
| * The type of the socket option value |
| * |
| * @param name |
| * The socket option |
| * |
| * @param value |
| * The value of the socket option. A value of {@code null} may be |
| * a valid value for some socket options. |
| * |
| * @return This channel |
| * |
| * @throws UnsupportedOperationException |
| * If the socket option is not supported by this channel |
| * |
| * @throws IllegalArgumentException |
| * If the value is not a valid value for this socket option |
| * |
| * @throws ClosedChannelException |
| * If this channel is closed |
| * |
| * @throws IOException |
| * If an I/O error occurs |
| * |
| * @see SctpStandardSocketOptions |
| */ |
| public abstract <T> SctpChannel setOption(SctpSocketOption<T> name, T value) |
| throws IOException; |
| |
| /** |
| * Returns a set of the socket options supported by this channel. |
| * |
| * <P> This method will continue to return the set of options even after the |
| * channel has been closed. |
| * |
| * @return A set of the socket options supported by this channel |
| */ |
| public abstract Set<SctpSocketOption<?>> supportedOptions(); |
| |
| /** |
| * Returns an operation set identifying this channel's supported operations. |
| * |
| * <P> SCTP channels support connecting, reading, and writing, so this |
| * method returns {@code (}{@link SelectionKey#OP_CONNECT} |
| * {@code |} {@link SelectionKey#OP_READ} {@code |} {@link |
| * SelectionKey#OP_WRITE}{@code )}. |
| * |
| * @return The valid-operation set |
| */ |
| @Override |
| public final int validOps() { |
| return (SelectionKey.OP_READ | |
| SelectionKey.OP_WRITE | |
| SelectionKey.OP_CONNECT); |
| } |
| |
| /** |
| * Receives a message into the given buffer and/or handles a notification. |
| * |
| * <P> If a message or notification is immediately available, or if this |
| * channel is in blocking mode and one eventually becomes available, then |
| * the message or notification is returned or handled, respectively. If this |
| * channel is in non-blocking mode and a message or notification is not |
| * immediately available then this method immediately returns {@code null}. |
| * |
| * <P> If this method receives a message it is copied into the given byte |
| * buffer. The message is transferred into the given byte buffer starting at |
| * its current position and the buffers position is incremented by the |
| * number of bytes read. If there are fewer bytes remaining in the buffer |
| * than are required to hold the message, or the underlying input buffer |
| * does not contain the complete message, then an invocation of {@link |
| * MessageInfo#isComplete isComplete} on the returned {@code |
| * MessageInfo} will return {@code false}, and more invocations of this |
| * method will be necessary to completely consume the messgae. Only |
| * one message at a time will be partially delivered in any stream. The |
| * socket option {@link SctpStandardSocketOptions#SCTP_FRAGMENT_INTERLEAVE |
| * SCTP_FRAGMENT_INTERLEAVE} controls various aspects of what interlacing of |
| * messages occurs. |
| * |
| * <P> If this method receives a notification then the appropriate method of |
| * the given handler, if there is one, is invoked. If the handler returns |
| * {@link HandlerResult#CONTINUE CONTINUE} then this method will try to |
| * receive another message/notification, otherwise, if {@link |
| * HandlerResult#RETURN RETURN} is returned this method will return {@code |
| * null}. If an uncaught exception is thrown by the handler it will be |
| * propagated up the stack through this method. |
| * |
| * <P> This method may be invoked at any time. If another thread has |
| * already initiated a receive operation upon this channel, then an |
| * invocation of this method will block until the first operation is |
| * complete. The given handler is invoked without holding any locks used |
| * to enforce the above synchronization policy, that way handlers |
| * will not stall other threads from receiving. A handler should not invoke |
| * the {@code receive} method of this channel, if it does an |
| * {@link IllegalReceiveException} will be thrown. |
| * |
| * @param <T> |
| * The type of the attachment |
| * |
| * @param dst |
| * The buffer into which message bytes are to be transferred |
| * |
| * @param attachment |
| * The object to attach to the receive operation; can be |
| * {@code null} |
| * |
| * @param handler |
| * A handler to handle notifications from the SCTP stack, or {@code |
| * null} to ignore any notifications. |
| * |
| * @return The {@code MessageInfo}, {@code null} if this channel is in |
| * non-blocking mode and no messages are immediately available or |
| * the notification handler returns {@link HandlerResult#RETURN |
| * RETURN} after handling a notification |
| * |
| * @throws java.nio.channels.ClosedChannelException |
| * If this channel is closed |
| * |
| * @throws java.nio.channels.AsynchronousCloseException |
| * If another thread closes this channel |
| * while the read operation is in progress |
| * |
| * @throws java.nio.channels.ClosedByInterruptException |
| * If another thread interrupts the current thread |
| * while the read operation is in progress, thereby |
| * closing the channel and setting the current thread's |
| * interrupt status |
| * |
| * @throws java.nio.channels.NotYetConnectedException |
| * If this channel is not yet connected |
| * |
| * @throws IllegalReceiveException |
| * If the given handler invokes the {@code receive} method of this |
| * channel |
| * |
| * @throws IOException |
| * If some other I/O error occurs |
| */ |
| public abstract <T> MessageInfo receive(ByteBuffer dst, |
| T attachment, |
| NotificationHandler<T> handler) |
| throws IOException; |
| |
| /** |
| * Sends a message via this channel. |
| * |
| * <P> If this channel is in non-blocking mode and there is sufficient room |
| * in the underlying output buffer, or if this channel is in blocking mode |
| * and sufficient room becomes available, then the remaining bytes in the |
| * given byte buffer are transmitted as a single message. Sending a message |
| * is atomic unless explicit message completion {@link |
| * SctpStandardSocketOptions#SCTP_EXPLICIT_COMPLETE SCTP_EXPLICIT_COMPLETE} |
| * socket option is enabled on this channel's socket. |
| * |
| * <P> The message is transferred from the byte buffer as if by a regular |
| * {@link java.nio.channels.WritableByteChannel#write(java.nio.ByteBuffer) |
| * write} operation. |
| * |
| * <P> The bytes will be written to the stream number that is specified by |
| * {@link MessageInfo#streamNumber streamNumber} in the given {@code |
| * messageInfo}. |
| * |
| * <P> This method may be invoked at any time. If another thread has already |
| * initiated a send operation upon this channel, then an invocation of |
| * this method will block until the first operation is complete. |
| * |
| * @param src |
| * The buffer containing the message to be sent |
| * |
| * @param messageInfo |
| * Ancillary data about the message to be sent |
| * |
| * @return The number of bytes sent, which will be either the number of |
| * bytes that were remaining in the messages buffer when this method |
| * was invoked or, if this channel is non-blocking, may be zero if |
| * there was insufficient room for the message in the underlying |
| * output buffer |
| * |
| * @throws InvalidStreamException |
| * If {@code streamNumner} is negative or greater than or equal to |
| * the maximum number of outgoing streams |
| * |
| * @throws java.nio.channels.ClosedChannelException |
| * If this channel is closed |
| * |
| * @throws java.nio.channels.AsynchronousCloseException |
| * If another thread closes this channel |
| * while the read operation is in progress |
| * |
| * @throws java.nio.channels.ClosedByInterruptException |
| * If another thread interrupts the current thread |
| * while the read operation is in progress, thereby |
| * closing the channel and setting the current thread's |
| * interrupt status |
| * |
| * @throws java.nio.channels.NotYetConnectedException |
| * If this channel is not yet connected |
| * |
| * @throws IOException |
| * If some other I/O error occurs |
| */ |
| public abstract int send(ByteBuffer src, MessageInfo messageInfo) |
| throws IOException; |
| } |