| /* |
| * Copyright 1997-2009 Sun Microsystems, Inc. All Rights Reserved. |
| * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
| * |
| * This code is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 only, as |
| * published by the Free Software Foundation. |
| * |
| * This code is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * version 2 for more details (a copy is included in the LICENSE file that |
| * accompanied this code). |
| * |
| * You should have received a copy of the GNU General Public License version |
| * 2 along with this work; if not, write to the Free Software Foundation, |
| * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. |
| * |
| * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, |
| * CA 95054 USA or visit www.sun.com if you need additional information or |
| * have any questions. |
| * |
| */ |
| |
| inline void MacroAssembler::pd_patch_instruction(address branch, address target) { |
| jint& stub_inst = *(jint*) branch; |
| stub_inst = patched_branch(target - branch, stub_inst, 0); |
| } |
| |
| #ifndef PRODUCT |
| inline void MacroAssembler::pd_print_patched_instruction(address branch) { |
| jint stub_inst = *(jint*) branch; |
| print_instruction(stub_inst); |
| ::tty->print("%s", " (unresolved)"); |
| } |
| #endif // PRODUCT |
| |
| inline bool Address::is_simm13(int offset) { return Assembler::is_simm13(disp() + offset); } |
| |
| |
| // inlines for SPARC assembler -- dmu 5/97 |
| |
| inline void Assembler::check_delay() { |
| # ifdef CHECK_DELAY |
| guarantee( delay_state != at_delay_slot, "must say delayed() when filling delay slot"); |
| delay_state = no_delay; |
| # endif |
| } |
| |
| inline void Assembler::emit_long(int x) { |
| check_delay(); |
| AbstractAssembler::emit_long(x); |
| } |
| |
| inline void Assembler::emit_data(int x, relocInfo::relocType rtype) { |
| relocate(rtype); |
| emit_long(x); |
| } |
| |
| inline void Assembler::emit_data(int x, RelocationHolder const& rspec) { |
| relocate(rspec); |
| emit_long(x); |
| } |
| |
| |
| inline void Assembler::add( Register s1, Register s2, Register d ) { emit_long( op(arith_op) | rd(d) | op3(add_op3) | rs1(s1) | rs2(s2) ); } |
| inline void Assembler::add( Register s1, int simm13a, Register d, relocInfo::relocType rtype ) { emit_data( op(arith_op) | rd(d) | op3(add_op3) | rs1(s1) | immed(true) | simm(simm13a, 13), rtype ); } |
| inline void Assembler::add( Register s1, int simm13a, Register d, RelocationHolder const& rspec ) { emit_data( op(arith_op) | rd(d) | op3(add_op3) | rs1(s1) | immed(true) | simm(simm13a, 13), rspec ); } |
| inline void Assembler::add( const Address& a, Register d, int offset) { add( a.base(), a.disp() + offset, d, a.rspec(offset)); } |
| |
| inline void Assembler::bpr( RCondition c, bool a, Predict p, Register s1, address d, relocInfo::relocType rt ) { v9_only(); emit_data( op(branch_op) | annul(a) | cond(c) | op2(bpr_op2) | wdisp16(intptr_t(d), intptr_t(pc())) | predict(p) | rs1(s1), rt); has_delay_slot(); } |
| inline void Assembler::bpr( RCondition c, bool a, Predict p, Register s1, Label& L) { bpr( c, a, p, s1, target(L)); } |
| |
| inline void Assembler::fb( Condition c, bool a, address d, relocInfo::relocType rt ) { v9_dep(); emit_data( op(branch_op) | annul(a) | cond(c) | op2(fb_op2) | wdisp(intptr_t(d), intptr_t(pc()), 22), rt); has_delay_slot(); } |
| inline void Assembler::fb( Condition c, bool a, Label& L ) { fb(c, a, target(L)); } |
| |
| inline void Assembler::fbp( Condition c, bool a, CC cc, Predict p, address d, relocInfo::relocType rt ) { v9_only(); emit_data( op(branch_op) | annul(a) | cond(c) | op2(fbp_op2) | branchcc(cc) | predict(p) | wdisp(intptr_t(d), intptr_t(pc()), 19), rt); has_delay_slot(); } |
| inline void Assembler::fbp( Condition c, bool a, CC cc, Predict p, Label& L ) { fbp(c, a, cc, p, target(L)); } |
| |
| inline void Assembler::cb( Condition c, bool a, address d, relocInfo::relocType rt ) { v8_only(); emit_data( op(branch_op) | annul(a) | cond(c) | op2(cb_op2) | wdisp(intptr_t(d), intptr_t(pc()), 22), rt); has_delay_slot(); } |
| inline void Assembler::cb( Condition c, bool a, Label& L ) { cb(c, a, target(L)); } |
| |
| inline void Assembler::br( Condition c, bool a, address d, relocInfo::relocType rt ) { v9_dep(); emit_data( op(branch_op) | annul(a) | cond(c) | op2(br_op2) | wdisp(intptr_t(d), intptr_t(pc()), 22), rt); has_delay_slot(); } |
| inline void Assembler::br( Condition c, bool a, Label& L ) { br(c, a, target(L)); } |
| |
| inline void Assembler::bp( Condition c, bool a, CC cc, Predict p, address d, relocInfo::relocType rt ) { v9_only(); emit_data( op(branch_op) | annul(a) | cond(c) | op2(bp_op2) | branchcc(cc) | predict(p) | wdisp(intptr_t(d), intptr_t(pc()), 19), rt); has_delay_slot(); } |
| inline void Assembler::bp( Condition c, bool a, CC cc, Predict p, Label& L ) { bp(c, a, cc, p, target(L)); } |
| |
| inline void Assembler::call( address d, relocInfo::relocType rt ) { emit_data( op(call_op) | wdisp(intptr_t(d), intptr_t(pc()), 30), rt); has_delay_slot(); assert(rt != relocInfo::virtual_call_type, "must use virtual_call_Relocation::spec"); } |
| inline void Assembler::call( Label& L, relocInfo::relocType rt ) { call( target(L), rt); } |
| |
| inline void Assembler::flush( Register s1, Register s2) { emit_long( op(arith_op) | op3(flush_op3) | rs1(s1) | rs2(s2)); } |
| inline void Assembler::flush( Register s1, int simm13a) { emit_data( op(arith_op) | op3(flush_op3) | rs1(s1) | immed(true) | simm(simm13a, 13)); } |
| |
| inline void Assembler::jmpl( Register s1, Register s2, Register d ) { emit_long( op(arith_op) | rd(d) | op3(jmpl_op3) | rs1(s1) | rs2(s2)); has_delay_slot(); } |
| inline void Assembler::jmpl( Register s1, int simm13a, Register d, RelocationHolder const& rspec ) { emit_data( op(arith_op) | rd(d) | op3(jmpl_op3) | rs1(s1) | immed(true) | simm(simm13a, 13), rspec); has_delay_slot(); } |
| |
| inline void Assembler::jmpl( Address& a, Register d, int offset) { jmpl( a.base(), a.disp() + offset, d, a.rspec(offset)); } |
| |
| |
| inline void Assembler::ldf( FloatRegisterImpl::Width w, Register s1, Register s2, FloatRegister d) { emit_long( op(ldst_op) | fd(d, w) | alt_op3(ldf_op3, w) | rs1(s1) | rs2(s2) ); } |
| inline void Assembler::ldf( FloatRegisterImpl::Width w, Register s1, int simm13a, FloatRegister d) { emit_data( op(ldst_op) | fd(d, w) | alt_op3(ldf_op3, w) | rs1(s1) | immed(true) | simm(simm13a, 13)); } |
| |
| inline void Assembler::ldf( FloatRegisterImpl::Width w, const Address& a, FloatRegister d, int offset) { relocate(a.rspec(offset)); ldf( w, a.base(), a.disp() + offset, d); } |
| |
| inline void Assembler::ldfsr( Register s1, Register s2) { v9_dep(); emit_long( op(ldst_op) | op3(ldfsr_op3) | rs1(s1) | rs2(s2) ); } |
| inline void Assembler::ldfsr( Register s1, int simm13a) { v9_dep(); emit_data( op(ldst_op) | op3(ldfsr_op3) | rs1(s1) | immed(true) | simm(simm13a, 13)); } |
| inline void Assembler::ldxfsr( Register s1, Register s2) { v9_only(); emit_long( op(ldst_op) | rd(G1) | op3(ldfsr_op3) | rs1(s1) | rs2(s2) ); } |
| inline void Assembler::ldxfsr( Register s1, int simm13a) { v9_only(); emit_data( op(ldst_op) | rd(G1) | op3(ldfsr_op3) | rs1(s1) | immed(true) | simm(simm13a, 13)); } |
| |
| inline void Assembler::ldc( Register s1, Register s2, int crd) { v8_only(); emit_long( op(ldst_op) | fcn(crd) | op3(ldc_op3 ) | rs1(s1) | rs2(s2) ); } |
| inline void Assembler::ldc( Register s1, int simm13a, int crd) { v8_only(); emit_data( op(ldst_op) | fcn(crd) | op3(ldc_op3 ) | rs1(s1) | immed(true) | simm(simm13a, 13)); } |
| inline void Assembler::lddc( Register s1, Register s2, int crd) { v8_only(); emit_long( op(ldst_op) | fcn(crd) | op3(lddc_op3 ) | rs1(s1) | rs2(s2) ); } |
| inline void Assembler::lddc( Register s1, int simm13a, int crd) { v8_only(); emit_data( op(ldst_op) | fcn(crd) | op3(lddc_op3 ) | rs1(s1) | immed(true) | simm(simm13a, 13)); } |
| inline void Assembler::ldcsr( Register s1, Register s2, int crd) { v8_only(); emit_long( op(ldst_op) | fcn(crd) | op3(ldcsr_op3) | rs1(s1) | rs2(s2) ); } |
| inline void Assembler::ldcsr( Register s1, int simm13a, int crd) { v8_only(); emit_data( op(ldst_op) | fcn(crd) | op3(ldcsr_op3) | rs1(s1) | immed(true) | simm(simm13a, 13)); } |
| |
| inline void Assembler::ldsb( Register s1, Register s2, Register d) { emit_long( op(ldst_op) | rd(d) | op3(ldsb_op3) | rs1(s1) | rs2(s2) ); } |
| inline void Assembler::ldsb( Register s1, int simm13a, Register d) { emit_data( op(ldst_op) | rd(d) | op3(ldsb_op3) | rs1(s1) | immed(true) | simm(simm13a, 13)); } |
| |
| inline void Assembler::ldsh( Register s1, Register s2, Register d) { emit_long( op(ldst_op) | rd(d) | op3(ldsh_op3) | rs1(s1) | rs2(s2) ); } |
| inline void Assembler::ldsh( Register s1, int simm13a, Register d) { emit_data( op(ldst_op) | rd(d) | op3(ldsh_op3) | rs1(s1) | immed(true) | simm(simm13a, 13)); } |
| inline void Assembler::ldsw( Register s1, Register s2, Register d) { emit_long( op(ldst_op) | rd(d) | op3(ldsw_op3) | rs1(s1) | rs2(s2) ); } |
| inline void Assembler::ldsw( Register s1, int simm13a, Register d) { emit_data( op(ldst_op) | rd(d) | op3(ldsw_op3) | rs1(s1) | immed(true) | simm(simm13a, 13)); } |
| inline void Assembler::ldub( Register s1, Register s2, Register d) { emit_long( op(ldst_op) | rd(d) | op3(ldub_op3) | rs1(s1) | rs2(s2) ); } |
| inline void Assembler::ldub( Register s1, int simm13a, Register d) { emit_data( op(ldst_op) | rd(d) | op3(ldub_op3) | rs1(s1) | immed(true) | simm(simm13a, 13)); } |
| inline void Assembler::lduh( Register s1, Register s2, Register d) { emit_long( op(ldst_op) | rd(d) | op3(lduh_op3) | rs1(s1) | rs2(s2) ); } |
| inline void Assembler::lduh( Register s1, int simm13a, Register d) { emit_data( op(ldst_op) | rd(d) | op3(lduh_op3) | rs1(s1) | immed(true) | simm(simm13a, 13)); } |
| inline void Assembler::lduw( Register s1, Register s2, Register d) { emit_long( op(ldst_op) | rd(d) | op3(lduw_op3) | rs1(s1) | rs2(s2) ); } |
| inline void Assembler::lduw( Register s1, int simm13a, Register d) { emit_data( op(ldst_op) | rd(d) | op3(lduw_op3) | rs1(s1) | immed(true) | simm(simm13a, 13)); } |
| |
| inline void Assembler::ldx( Register s1, Register s2, Register d) { v9_only(); emit_long( op(ldst_op) | rd(d) | op3(ldx_op3) | rs1(s1) | rs2(s2) ); } |
| inline void Assembler::ldx( Register s1, int simm13a, Register d) { v9_only(); emit_data( op(ldst_op) | rd(d) | op3(ldx_op3) | rs1(s1) | immed(true) | simm(simm13a, 13)); } |
| inline void Assembler::ldd( Register s1, Register s2, Register d) { v9_dep(); assert(d->is_even(), "not even"); emit_long( op(ldst_op) | rd(d) | op3(ldd_op3) | rs1(s1) | rs2(s2) ); } |
| inline void Assembler::ldd( Register s1, int simm13a, Register d) { v9_dep(); assert(d->is_even(), "not even"); emit_data( op(ldst_op) | rd(d) | op3(ldd_op3) | rs1(s1) | immed(true) | simm(simm13a, 13)); } |
| |
| #ifdef _LP64 |
| // Make all 32 bit loads signed so 64 bit registers maintain proper sign |
| inline void Assembler::ld( Register s1, Register s2, Register d) { ldsw( s1, s2, d); } |
| inline void Assembler::ld( Register s1, int simm13a, Register d) { ldsw( s1, simm13a, d); } |
| #else |
| inline void Assembler::ld( Register s1, Register s2, Register d) { lduw( s1, s2, d); } |
| inline void Assembler::ld( Register s1, int simm13a, Register d) { lduw( s1, simm13a, d); } |
| #endif |
| |
| inline void Assembler::ldub( Register s1, RegisterOrConstant s2, Register d) { |
| if (s2.is_register()) ldsb(s1, s2.as_register(), d); |
| else ldsb(s1, s2.as_constant(), d); |
| } |
| inline void Assembler::ldsb( Register s1, RegisterOrConstant s2, Register d) { |
| if (s2.is_register()) ldsb(s1, s2.as_register(), d); |
| else ldsb(s1, s2.as_constant(), d); |
| } |
| inline void Assembler::lduh( Register s1, RegisterOrConstant s2, Register d) { |
| if (s2.is_register()) ldsh(s1, s2.as_register(), d); |
| else ldsh(s1, s2.as_constant(), d); |
| } |
| inline void Assembler::ldsh( Register s1, RegisterOrConstant s2, Register d) { |
| if (s2.is_register()) ldsh(s1, s2.as_register(), d); |
| else ldsh(s1, s2.as_constant(), d); |
| } |
| inline void Assembler::lduw( Register s1, RegisterOrConstant s2, Register d) { |
| if (s2.is_register()) ldsw(s1, s2.as_register(), d); |
| else ldsw(s1, s2.as_constant(), d); |
| } |
| inline void Assembler::ldsw( Register s1, RegisterOrConstant s2, Register d) { |
| if (s2.is_register()) ldsw(s1, s2.as_register(), d); |
| else ldsw(s1, s2.as_constant(), d); |
| } |
| inline void Assembler::ldx( Register s1, RegisterOrConstant s2, Register d) { |
| if (s2.is_register()) ldx(s1, s2.as_register(), d); |
| else ldx(s1, s2.as_constant(), d); |
| } |
| inline void Assembler::ld( Register s1, RegisterOrConstant s2, Register d) { |
| if (s2.is_register()) ld(s1, s2.as_register(), d); |
| else ld(s1, s2.as_constant(), d); |
| } |
| inline void Assembler::ldd( Register s1, RegisterOrConstant s2, Register d) { |
| if (s2.is_register()) ldd(s1, s2.as_register(), d); |
| else ldd(s1, s2.as_constant(), d); |
| } |
| |
| // form effective addresses this way: |
| inline void Assembler::add( Register s1, RegisterOrConstant s2, Register d, int offset) { |
| if (s2.is_register()) add(s1, s2.as_register(), d); |
| else { add(s1, s2.as_constant() + offset, d); offset = 0; } |
| if (offset != 0) add(d, offset, d); |
| } |
| |
| inline void Assembler::ld( const Address& a, Register d, int offset ) { relocate(a.rspec(offset)); ld( a.base(), a.disp() + offset, d ); } |
| inline void Assembler::ldsb( const Address& a, Register d, int offset ) { relocate(a.rspec(offset)); ldsb( a.base(), a.disp() + offset, d ); } |
| inline void Assembler::ldsh( const Address& a, Register d, int offset ) { relocate(a.rspec(offset)); ldsh( a.base(), a.disp() + offset, d ); } |
| inline void Assembler::ldsw( const Address& a, Register d, int offset ) { relocate(a.rspec(offset)); ldsw( a.base(), a.disp() + offset, d ); } |
| inline void Assembler::ldub( const Address& a, Register d, int offset ) { relocate(a.rspec(offset)); ldub( a.base(), a.disp() + offset, d ); } |
| inline void Assembler::lduh( const Address& a, Register d, int offset ) { relocate(a.rspec(offset)); lduh( a.base(), a.disp() + offset, d ); } |
| inline void Assembler::lduw( const Address& a, Register d, int offset ) { relocate(a.rspec(offset)); lduw( a.base(), a.disp() + offset, d ); } |
| inline void Assembler::ldd( const Address& a, Register d, int offset ) { relocate(a.rspec(offset)); ldd( a.base(), a.disp() + offset, d ); } |
| inline void Assembler::ldx( const Address& a, Register d, int offset ) { relocate(a.rspec(offset)); ldx( a.base(), a.disp() + offset, d ); } |
| |
| |
| inline void Assembler::ldstub( Register s1, Register s2, Register d) { emit_long( op(ldst_op) | rd(d) | op3(ldstub_op3) | rs1(s1) | rs2(s2) ); } |
| inline void Assembler::ldstub( Register s1, int simm13a, Register d) { emit_data( op(ldst_op) | rd(d) | op3(ldstub_op3) | rs1(s1) | immed(true) | simm(simm13a, 13)); } |
| |
| |
| inline void Assembler::prefetch(Register s1, Register s2, PrefetchFcn f) { v9_only(); emit_long( op(ldst_op) | fcn(f) | op3(prefetch_op3) | rs1(s1) | rs2(s2) ); } |
| inline void Assembler::prefetch(Register s1, int simm13a, PrefetchFcn f) { v9_only(); emit_data( op(ldst_op) | fcn(f) | op3(prefetch_op3) | rs1(s1) | immed(true) | simm(simm13a, 13)); } |
| |
| inline void Assembler::prefetch(const Address& a, PrefetchFcn f, int offset) { v9_only(); relocate(a.rspec(offset)); prefetch(a.base(), a.disp() + offset, f); } |
| |
| |
| inline void Assembler::rett( Register s1, Register s2 ) { emit_long( op(arith_op) | op3(rett_op3) | rs1(s1) | rs2(s2)); has_delay_slot(); } |
| inline void Assembler::rett( Register s1, int simm13a, relocInfo::relocType rt) { emit_data( op(arith_op) | op3(rett_op3) | rs1(s1) | immed(true) | simm(simm13a, 13), rt); has_delay_slot(); } |
| |
| inline void Assembler::sethi( int imm22a, Register d, RelocationHolder const& rspec ) { emit_data( op(branch_op) | rd(d) | op2(sethi_op2) | hi22(imm22a), rspec); } |
| |
| // pp 222 |
| |
| inline void Assembler::stf( FloatRegisterImpl::Width w, FloatRegister d, Register s1, Register s2) { emit_long( op(ldst_op) | fd(d, w) | alt_op3(stf_op3, w) | rs1(s1) | rs2(s2) ); } |
| inline void Assembler::stf( FloatRegisterImpl::Width w, FloatRegister d, Register s1, int simm13a) { emit_data( op(ldst_op) | fd(d, w) | alt_op3(stf_op3, w) | rs1(s1) | immed(true) | simm(simm13a, 13)); } |
| |
| inline void Assembler::stf( FloatRegisterImpl::Width w, FloatRegister d, const Address& a, int offset) { relocate(a.rspec(offset)); stf(w, d, a.base(), a.disp() + offset); } |
| |
| inline void Assembler::stfsr( Register s1, Register s2) { v9_dep(); emit_long( op(ldst_op) | op3(stfsr_op3) | rs1(s1) | rs2(s2) ); } |
| inline void Assembler::stfsr( Register s1, int simm13a) { v9_dep(); emit_data( op(ldst_op) | op3(stfsr_op3) | rs1(s1) | immed(true) | simm(simm13a, 13)); } |
| inline void Assembler::stxfsr( Register s1, Register s2) { v9_only(); emit_long( op(ldst_op) | rd(G1) | op3(stfsr_op3) | rs1(s1) | rs2(s2) ); } |
| inline void Assembler::stxfsr( Register s1, int simm13a) { v9_only(); emit_data( op(ldst_op) | rd(G1) | op3(stfsr_op3) | rs1(s1) | immed(true) | simm(simm13a, 13)); } |
| |
| // p 226 |
| |
| inline void Assembler::stb( Register d, Register s1, Register s2) { emit_long( op(ldst_op) | rd(d) | op3(stb_op3) | rs1(s1) | rs2(s2) ); } |
| inline void Assembler::stb( Register d, Register s1, int simm13a) { emit_data( op(ldst_op) | rd(d) | op3(stb_op3) | rs1(s1) | immed(true) | simm(simm13a, 13)); } |
| inline void Assembler::sth( Register d, Register s1, Register s2) { emit_long( op(ldst_op) | rd(d) | op3(sth_op3) | rs1(s1) | rs2(s2) ); } |
| inline void Assembler::sth( Register d, Register s1, int simm13a) { emit_data( op(ldst_op) | rd(d) | op3(sth_op3) | rs1(s1) | immed(true) | simm(simm13a, 13)); } |
| inline void Assembler::stw( Register d, Register s1, Register s2) { emit_long( op(ldst_op) | rd(d) | op3(stw_op3) | rs1(s1) | rs2(s2) ); } |
| inline void Assembler::stw( Register d, Register s1, int simm13a) { emit_data( op(ldst_op) | rd(d) | op3(stw_op3) | rs1(s1) | immed(true) | simm(simm13a, 13)); } |
| |
| |
| inline void Assembler::stx( Register d, Register s1, Register s2) { v9_only(); emit_long( op(ldst_op) | rd(d) | op3(stx_op3) | rs1(s1) | rs2(s2) ); } |
| inline void Assembler::stx( Register d, Register s1, int simm13a) { v9_only(); emit_data( op(ldst_op) | rd(d) | op3(stx_op3) | rs1(s1) | immed(true) | simm(simm13a, 13)); } |
| inline void Assembler::std( Register d, Register s1, Register s2) { v9_dep(); assert(d->is_even(), "not even"); emit_long( op(ldst_op) | rd(d) | op3(std_op3) | rs1(s1) | rs2(s2) ); } |
| inline void Assembler::std( Register d, Register s1, int simm13a) { v9_dep(); assert(d->is_even(), "not even"); emit_data( op(ldst_op) | rd(d) | op3(std_op3) | rs1(s1) | immed(true) | simm(simm13a, 13)); } |
| |
| inline void Assembler::st( Register d, Register s1, Register s2) { stw(d, s1, s2); } |
| inline void Assembler::st( Register d, Register s1, int simm13a) { stw(d, s1, simm13a); } |
| |
| inline void Assembler::stb( Register d, Register s1, RegisterOrConstant s2) { |
| if (s2.is_register()) stb(d, s1, s2.as_register()); |
| else stb(d, s1, s2.as_constant()); |
| } |
| inline void Assembler::sth( Register d, Register s1, RegisterOrConstant s2) { |
| if (s2.is_register()) sth(d, s1, s2.as_register()); |
| else sth(d, s1, s2.as_constant()); |
| } |
| inline void Assembler::stx( Register d, Register s1, RegisterOrConstant s2) { |
| if (s2.is_register()) stx(d, s1, s2.as_register()); |
| else stx(d, s1, s2.as_constant()); |
| } |
| inline void Assembler::std( Register d, Register s1, RegisterOrConstant s2) { |
| if (s2.is_register()) std(d, s1, s2.as_register()); |
| else std(d, s1, s2.as_constant()); |
| } |
| inline void Assembler::st( Register d, Register s1, RegisterOrConstant s2) { |
| if (s2.is_register()) st(d, s1, s2.as_register()); |
| else st(d, s1, s2.as_constant()); |
| } |
| |
| inline void Assembler::stb( Register d, const Address& a, int offset) { relocate(a.rspec(offset)); stb( d, a.base(), a.disp() + offset); } |
| inline void Assembler::sth( Register d, const Address& a, int offset) { relocate(a.rspec(offset)); sth( d, a.base(), a.disp() + offset); } |
| inline void Assembler::stw( Register d, const Address& a, int offset) { relocate(a.rspec(offset)); stw( d, a.base(), a.disp() + offset); } |
| inline void Assembler::st( Register d, const Address& a, int offset) { relocate(a.rspec(offset)); st( d, a.base(), a.disp() + offset); } |
| inline void Assembler::std( Register d, const Address& a, int offset) { relocate(a.rspec(offset)); std( d, a.base(), a.disp() + offset); } |
| inline void Assembler::stx( Register d, const Address& a, int offset) { relocate(a.rspec(offset)); stx( d, a.base(), a.disp() + offset); } |
| |
| // v8 p 99 |
| |
| inline void Assembler::stc( int crd, Register s1, Register s2) { v8_only(); emit_long( op(ldst_op) | fcn(crd) | op3(stc_op3 ) | rs1(s1) | rs2(s2) ); } |
| inline void Assembler::stc( int crd, Register s1, int simm13a) { v8_only(); emit_data( op(ldst_op) | fcn(crd) | op3(stc_op3 ) | rs1(s1) | immed(true) | simm(simm13a, 13)); } |
| inline void Assembler::stdc( int crd, Register s1, Register s2) { v8_only(); emit_long( op(ldst_op) | fcn(crd) | op3(stdc_op3) | rs1(s1) | rs2(s2) ); } |
| inline void Assembler::stdc( int crd, Register s1, int simm13a) { v8_only(); emit_data( op(ldst_op) | fcn(crd) | op3(stdc_op3) | rs1(s1) | immed(true) | simm(simm13a, 13)); } |
| inline void Assembler::stcsr( int crd, Register s1, Register s2) { v8_only(); emit_long( op(ldst_op) | fcn(crd) | op3(stcsr_op3) | rs1(s1) | rs2(s2) ); } |
| inline void Assembler::stcsr( int crd, Register s1, int simm13a) { v8_only(); emit_data( op(ldst_op) | fcn(crd) | op3(stcsr_op3) | rs1(s1) | immed(true) | simm(simm13a, 13)); } |
| inline void Assembler::stdcq( int crd, Register s1, Register s2) { v8_only(); emit_long( op(ldst_op) | fcn(crd) | op3(stdcq_op3) | rs1(s1) | rs2(s2) ); } |
| inline void Assembler::stdcq( int crd, Register s1, int simm13a) { v8_only(); emit_data( op(ldst_op) | fcn(crd) | op3(stdcq_op3) | rs1(s1) | immed(true) | simm(simm13a, 13)); } |
| |
| |
| // pp 231 |
| |
| inline void Assembler::swap( Register s1, Register s2, Register d) { v9_dep(); emit_long( op(ldst_op) | rd(d) | op3(swap_op3) | rs1(s1) | rs2(s2) ); } |
| inline void Assembler::swap( Register s1, int simm13a, Register d) { v9_dep(); emit_data( op(ldst_op) | rd(d) | op3(swap_op3) | rs1(s1) | immed(true) | simm(simm13a, 13)); } |
| |
| inline void Assembler::swap( Address& a, Register d, int offset ) { relocate(a.rspec(offset)); swap( a.base(), a.disp() + offset, d ); } |
| |
| |
| // Use the right loads/stores for the platform |
| inline void MacroAssembler::ld_ptr( Register s1, Register s2, Register d ) { |
| #ifdef _LP64 |
| Assembler::ldx( s1, s2, d); |
| #else |
| Assembler::ld( s1, s2, d); |
| #endif |
| } |
| |
| inline void MacroAssembler::ld_ptr( Register s1, int simm13a, Register d ) { |
| #ifdef _LP64 |
| Assembler::ldx( s1, simm13a, d); |
| #else |
| Assembler::ld( s1, simm13a, d); |
| #endif |
| } |
| |
| inline void MacroAssembler::ld_ptr( Register s1, RegisterOrConstant s2, Register d ) { |
| #ifdef _LP64 |
| Assembler::ldx( s1, s2, d); |
| #else |
| Assembler::ld( s1, s2, d); |
| #endif |
| } |
| |
| inline void MacroAssembler::ld_ptr( const Address& a, Register d, int offset ) { |
| #ifdef _LP64 |
| Assembler::ldx( a, d, offset ); |
| #else |
| Assembler::ld( a, d, offset ); |
| #endif |
| } |
| |
| inline void MacroAssembler::st_ptr( Register d, Register s1, Register s2 ) { |
| #ifdef _LP64 |
| Assembler::stx( d, s1, s2); |
| #else |
| Assembler::st( d, s1, s2); |
| #endif |
| } |
| |
| inline void MacroAssembler::st_ptr( Register d, Register s1, int simm13a ) { |
| #ifdef _LP64 |
| Assembler::stx( d, s1, simm13a); |
| #else |
| Assembler::st( d, s1, simm13a); |
| #endif |
| } |
| |
| inline void MacroAssembler::st_ptr( Register d, Register s1, RegisterOrConstant s2 ) { |
| #ifdef _LP64 |
| Assembler::stx( d, s1, s2); |
| #else |
| Assembler::st( d, s1, s2); |
| #endif |
| } |
| |
| inline void MacroAssembler::st_ptr( Register d, const Address& a, int offset) { |
| #ifdef _LP64 |
| Assembler::stx( d, a, offset); |
| #else |
| Assembler::st( d, a, offset); |
| #endif |
| } |
| |
| // Use the right loads/stores for the platform |
| inline void MacroAssembler::ld_long( Register s1, Register s2, Register d ) { |
| #ifdef _LP64 |
| Assembler::ldx(s1, s2, d); |
| #else |
| Assembler::ldd(s1, s2, d); |
| #endif |
| } |
| |
| inline void MacroAssembler::ld_long( Register s1, int simm13a, Register d ) { |
| #ifdef _LP64 |
| Assembler::ldx(s1, simm13a, d); |
| #else |
| Assembler::ldd(s1, simm13a, d); |
| #endif |
| } |
| |
| inline void MacroAssembler::ld_long( Register s1, RegisterOrConstant s2, Register d ) { |
| #ifdef _LP64 |
| Assembler::ldx(s1, s2, d); |
| #else |
| Assembler::ldd(s1, s2, d); |
| #endif |
| } |
| |
| inline void MacroAssembler::ld_long( const Address& a, Register d, int offset ) { |
| #ifdef _LP64 |
| Assembler::ldx(a, d, offset ); |
| #else |
| Assembler::ldd(a, d, offset ); |
| #endif |
| } |
| |
| inline void MacroAssembler::st_long( Register d, Register s1, Register s2 ) { |
| #ifdef _LP64 |
| Assembler::stx(d, s1, s2); |
| #else |
| Assembler::std(d, s1, s2); |
| #endif |
| } |
| |
| inline void MacroAssembler::st_long( Register d, Register s1, int simm13a ) { |
| #ifdef _LP64 |
| Assembler::stx(d, s1, simm13a); |
| #else |
| Assembler::std(d, s1, simm13a); |
| #endif |
| } |
| |
| inline void MacroAssembler::st_long( Register d, Register s1, RegisterOrConstant s2 ) { |
| #ifdef _LP64 |
| Assembler::stx(d, s1, s2); |
| #else |
| Assembler::std(d, s1, s2); |
| #endif |
| } |
| |
| inline void MacroAssembler::st_long( Register d, const Address& a, int offset ) { |
| #ifdef _LP64 |
| Assembler::stx(d, a, offset); |
| #else |
| Assembler::std(d, a, offset); |
| #endif |
| } |
| |
| // Functions for isolating 64 bit shifts for LP64 |
| |
| inline void MacroAssembler::sll_ptr( Register s1, Register s2, Register d ) { |
| #ifdef _LP64 |
| Assembler::sllx(s1, s2, d); |
| #else |
| Assembler::sll(s1, s2, d); |
| #endif |
| } |
| |
| inline void MacroAssembler::sll_ptr( Register s1, int imm6a, Register d ) { |
| #ifdef _LP64 |
| Assembler::sllx(s1, imm6a, d); |
| #else |
| Assembler::sll(s1, imm6a, d); |
| #endif |
| } |
| |
| inline void MacroAssembler::srl_ptr( Register s1, Register s2, Register d ) { |
| #ifdef _LP64 |
| Assembler::srlx(s1, s2, d); |
| #else |
| Assembler::srl(s1, s2, d); |
| #endif |
| } |
| |
| inline void MacroAssembler::srl_ptr( Register s1, int imm6a, Register d ) { |
| #ifdef _LP64 |
| Assembler::srlx(s1, imm6a, d); |
| #else |
| Assembler::srl(s1, imm6a, d); |
| #endif |
| } |
| |
| inline void MacroAssembler::sll_ptr( Register s1, RegisterOrConstant s2, Register d ) { |
| if (s2.is_register()) sll_ptr(s1, s2.as_register(), d); |
| else sll_ptr(s1, s2.as_constant(), d); |
| } |
| |
| // Use the right branch for the platform |
| |
| inline void MacroAssembler::br( Condition c, bool a, Predict p, address d, relocInfo::relocType rt ) { |
| if (VM_Version::v9_instructions_work()) |
| Assembler::bp(c, a, icc, p, d, rt); |
| else |
| Assembler::br(c, a, d, rt); |
| } |
| |
| inline void MacroAssembler::br( Condition c, bool a, Predict p, Label& L ) { |
| br(c, a, p, target(L)); |
| } |
| |
| |
| // Branch that tests either xcc or icc depending on the |
| // architecture compiled (LP64 or not) |
| inline void MacroAssembler::brx( Condition c, bool a, Predict p, address d, relocInfo::relocType rt ) { |
| #ifdef _LP64 |
| Assembler::bp(c, a, xcc, p, d, rt); |
| #else |
| MacroAssembler::br(c, a, p, d, rt); |
| #endif |
| } |
| |
| inline void MacroAssembler::brx( Condition c, bool a, Predict p, Label& L ) { |
| brx(c, a, p, target(L)); |
| } |
| |
| inline void MacroAssembler::ba( bool a, Label& L ) { |
| br(always, a, pt, L); |
| } |
| |
| // Warning: V9 only functions |
| inline void MacroAssembler::bp( Condition c, bool a, CC cc, Predict p, address d, relocInfo::relocType rt ) { |
| Assembler::bp(c, a, cc, p, d, rt); |
| } |
| |
| inline void MacroAssembler::bp( Condition c, bool a, CC cc, Predict p, Label& L ) { |
| Assembler::bp(c, a, cc, p, L); |
| } |
| |
| inline void MacroAssembler::fb( Condition c, bool a, Predict p, address d, relocInfo::relocType rt ) { |
| if (VM_Version::v9_instructions_work()) |
| fbp(c, a, fcc0, p, d, rt); |
| else |
| Assembler::fb(c, a, d, rt); |
| } |
| |
| inline void MacroAssembler::fb( Condition c, bool a, Predict p, Label& L ) { |
| fb(c, a, p, target(L)); |
| } |
| |
| inline void MacroAssembler::fbp( Condition c, bool a, CC cc, Predict p, address d, relocInfo::relocType rt ) { |
| Assembler::fbp(c, a, cc, p, d, rt); |
| } |
| |
| inline void MacroAssembler::fbp( Condition c, bool a, CC cc, Predict p, Label& L ) { |
| Assembler::fbp(c, a, cc, p, L); |
| } |
| |
| inline void MacroAssembler::jmp( Register s1, Register s2 ) { jmpl( s1, s2, G0 ); } |
| inline void MacroAssembler::jmp( Register s1, int simm13a, RelocationHolder const& rspec ) { jmpl( s1, simm13a, G0, rspec); } |
| |
| // Call with a check to see if we need to deal with the added |
| // expense of relocation and if we overflow the displacement |
| // of the quick call instruction./ |
| // Check to see if we have to deal with relocations |
| inline void MacroAssembler::call( address d, relocInfo::relocType rt ) { |
| #ifdef _LP64 |
| intptr_t disp; |
| // NULL is ok because it will be relocated later. |
| // Must change NULL to a reachable address in order to |
| // pass asserts here and in wdisp. |
| if ( d == NULL ) |
| d = pc(); |
| |
| // Is this address within range of the call instruction? |
| // If not, use the expensive instruction sequence |
| disp = (intptr_t)d - (intptr_t)pc(); |
| if ( disp != (intptr_t)(int32_t)disp ) { |
| relocate(rt); |
| Address dest(O7, (address)d); |
| sethi(dest, /*ForceRelocatable=*/ true); |
| jmpl(dest, O7); |
| } |
| else { |
| Assembler::call( d, rt ); |
| } |
| #else |
| Assembler::call( d, rt ); |
| #endif |
| } |
| |
| inline void MacroAssembler::call( Label& L, relocInfo::relocType rt ) { |
| MacroAssembler::call( target(L), rt); |
| } |
| |
| |
| |
| inline void MacroAssembler::callr( Register s1, Register s2 ) { jmpl( s1, s2, O7 ); } |
| inline void MacroAssembler::callr( Register s1, int simm13a, RelocationHolder const& rspec ) { jmpl( s1, simm13a, O7, rspec); } |
| |
| // prefetch instruction |
| inline void MacroAssembler::iprefetch( address d, relocInfo::relocType rt ) { |
| if (VM_Version::v9_instructions_work()) |
| Assembler::bp( never, true, xcc, pt, d, rt ); |
| } |
| inline void MacroAssembler::iprefetch( Label& L) { iprefetch( target(L) ); } |
| |
| |
| // clobbers o7 on V8!! |
| // returns delta from gotten pc to addr after |
| inline int MacroAssembler::get_pc( Register d ) { |
| int x = offset(); |
| if (VM_Version::v9_instructions_work()) |
| rdpc(d); |
| else { |
| Label lbl; |
| Assembler::call(lbl, relocInfo::none); // No relocation as this is call to pc+0x8 |
| if (d == O7) delayed()->nop(); |
| else delayed()->mov(O7, d); |
| bind(lbl); |
| } |
| return offset() - x; |
| } |
| |
| |
| // Note: All MacroAssembler::set_foo functions are defined out-of-line. |
| |
| |
| // Loads the current PC of the following instruction as an immediate value in |
| // 2 instructions. All PCs in the CodeCache are within 2 Gig of each other. |
| inline intptr_t MacroAssembler::load_pc_address( Register reg, int bytes_to_skip ) { |
| intptr_t thepc = (intptr_t)pc() + 2*BytesPerInstWord + bytes_to_skip; |
| #ifdef _LP64 |
| Unimplemented(); |
| #else |
| Assembler::sethi( thepc & ~0x3ff, reg, internal_word_Relocation::spec((address)thepc)); |
| Assembler::add(reg,thepc & 0x3ff, reg, internal_word_Relocation::spec((address)thepc)); |
| #endif |
| return thepc; |
| } |
| |
| inline void MacroAssembler::load_address( Address& a, int offset ) { |
| assert_not_delayed(); |
| #ifdef _LP64 |
| sethi(a); |
| add(a, a.base(), offset); |
| #else |
| if (a.hi() == 0 && a.rtype() == relocInfo::none) { |
| set(a.disp() + offset, a.base()); |
| } |
| else { |
| sethi(a); |
| add(a, a.base(), offset); |
| } |
| #endif |
| } |
| |
| |
| inline void MacroAssembler::split_disp( Address& a, Register temp ) { |
| assert_not_delayed(); |
| a = a.split_disp(); |
| Assembler::sethi(a.hi(), temp, a.rspec()); |
| add(a.base(), temp, a.base()); |
| } |
| |
| |
| inline void MacroAssembler::load_contents( Address& a, Register d, int offset ) { |
| assert_not_delayed(); |
| sethi(a); |
| ld(a, d, offset); |
| } |
| |
| |
| inline void MacroAssembler::load_ptr_contents( Address& a, Register d, int offset ) { |
| assert_not_delayed(); |
| sethi(a); |
| ld_ptr(a, d, offset); |
| } |
| |
| |
| inline void MacroAssembler::store_contents( Register s, Address& a, int offset ) { |
| assert_not_delayed(); |
| sethi(a); |
| st(s, a, offset); |
| } |
| |
| |
| inline void MacroAssembler::store_ptr_contents( Register s, Address& a, int offset ) { |
| assert_not_delayed(); |
| sethi(a); |
| st_ptr(s, a, offset); |
| } |
| |
| |
| // This code sequence is relocatable to any address, even on LP64. |
| inline void MacroAssembler::jumpl_to( Address& a, Register d, int offset ) { |
| assert_not_delayed(); |
| // Force fixed length sethi because NativeJump and NativeFarCall don't handle |
| // variable length instruction streams. |
| sethi(a, /*ForceRelocatable=*/ true); |
| jmpl(a, d, offset); |
| } |
| |
| |
| inline void MacroAssembler::jump_to( Address& a, int offset ) { |
| jumpl_to( a, G0, offset ); |
| } |
| |
| |
| inline void MacroAssembler::jump_indirect_to( Address& a, Register temp, |
| int ld_offset, int jmp_offset ) { |
| assert_not_delayed(); |
| //sethi(a); // sethi is caller responsibility for this one |
| ld_ptr(a, temp, ld_offset); |
| jmp(temp, jmp_offset); |
| } |
| |
| |
| inline void MacroAssembler::set_oop( jobject obj, Register d ) { |
| set_oop(allocate_oop_address(obj, d)); |
| } |
| |
| |
| inline void MacroAssembler::set_oop_constant( jobject obj, Register d ) { |
| set_oop(constant_oop_address(obj, d)); |
| } |
| |
| |
| inline void MacroAssembler::set_oop( Address obj_addr ) { |
| assert(obj_addr.rspec().type()==relocInfo::oop_type, "must be an oop reloc"); |
| load_address(obj_addr); |
| } |
| |
| |
| inline void MacroAssembler::load_argument( Argument& a, Register d ) { |
| if (a.is_register()) |
| mov(a.as_register(), d); |
| else |
| ld (a.as_address(), d); |
| } |
| |
| inline void MacroAssembler::store_argument( Register s, Argument& a ) { |
| if (a.is_register()) |
| mov(s, a.as_register()); |
| else |
| st_ptr (s, a.as_address()); // ABI says everything is right justified. |
| } |
| |
| inline void MacroAssembler::store_ptr_argument( Register s, Argument& a ) { |
| if (a.is_register()) |
| mov(s, a.as_register()); |
| else |
| st_ptr (s, a.as_address()); |
| } |
| |
| |
| #ifdef _LP64 |
| inline void MacroAssembler::store_float_argument( FloatRegister s, Argument& a ) { |
| if (a.is_float_register()) |
| // V9 ABI has F1, F3, F5 are used to pass instead of O0, O1, O2 |
| fmov(FloatRegisterImpl::S, s, a.as_float_register() ); |
| else |
| // Floats are stored in the high half of the stack entry |
| // The low half is undefined per the ABI. |
| stf(FloatRegisterImpl::S, s, a.as_address(), sizeof(jfloat)); |
| } |
| |
| inline void MacroAssembler::store_double_argument( FloatRegister s, Argument& a ) { |
| if (a.is_float_register()) |
| // V9 ABI has D0, D2, D4 are used to pass instead of O0, O1, O2 |
| fmov(FloatRegisterImpl::D, s, a.as_double_register() ); |
| else |
| stf(FloatRegisterImpl::D, s, a.as_address()); |
| } |
| |
| inline void MacroAssembler::store_long_argument( Register s, Argument& a ) { |
| if (a.is_register()) |
| mov(s, a.as_register()); |
| else |
| stx(s, a.as_address()); |
| } |
| #endif |
| |
| inline void MacroAssembler::clrb( Register s1, Register s2) { stb( G0, s1, s2 ); } |
| inline void MacroAssembler::clrh( Register s1, Register s2) { sth( G0, s1, s2 ); } |
| inline void MacroAssembler::clr( Register s1, Register s2) { stw( G0, s1, s2 ); } |
| inline void MacroAssembler::clrx( Register s1, Register s2) { stx( G0, s1, s2 ); } |
| |
| inline void MacroAssembler::clrb( Register s1, int simm13a) { stb( G0, s1, simm13a); } |
| inline void MacroAssembler::clrh( Register s1, int simm13a) { sth( G0, s1, simm13a); } |
| inline void MacroAssembler::clr( Register s1, int simm13a) { stw( G0, s1, simm13a); } |
| inline void MacroAssembler::clrx( Register s1, int simm13a) { stx( G0, s1, simm13a); } |
| |
| // returns if membar generates anything, obviously this code should mirror |
| // membar below. |
| inline bool MacroAssembler::membar_has_effect( Membar_mask_bits const7a ) { |
| if( !os::is_MP() ) return false; // Not needed on single CPU |
| if( VM_Version::v9_instructions_work() ) { |
| const Membar_mask_bits effective_mask = |
| Membar_mask_bits(const7a & ~(LoadLoad | LoadStore | StoreStore)); |
| return (effective_mask != 0); |
| } else { |
| return true; |
| } |
| } |
| |
| inline void MacroAssembler::membar( Membar_mask_bits const7a ) { |
| // Uniprocessors do not need memory barriers |
| if (!os::is_MP()) return; |
| // Weakened for current Sparcs and TSO. See the v9 manual, sections 8.4.3, |
| // 8.4.4.3, a.31 and a.50. |
| if( VM_Version::v9_instructions_work() ) { |
| // Under TSO, setting bit 3, 2, or 0 is redundant, so the only value |
| // of the mmask subfield of const7a that does anything that isn't done |
| // implicitly is StoreLoad. |
| const Membar_mask_bits effective_mask = |
| Membar_mask_bits(const7a & ~(LoadLoad | LoadStore | StoreStore)); |
| if ( effective_mask != 0 ) { |
| Assembler::membar( effective_mask ); |
| } |
| } else { |
| // stbar is the closest there is on v8. Equivalent to membar(StoreStore). We |
| // do not issue the stbar because to my knowledge all v8 machines implement TSO, |
| // which guarantees that all stores behave as if an stbar were issued just after |
| // each one of them. On these machines, stbar ought to be a nop. There doesn't |
| // appear to be an equivalent of membar(StoreLoad) on v8: TSO doesn't require it, |
| // it can't be specified by stbar, nor have I come up with a way to simulate it. |
| // |
| // Addendum. Dave says that ldstub guarantees a write buffer flush to coherent |
| // space. Put one here to be on the safe side. |
| Assembler::ldstub(SP, 0, G0); |
| } |
| } |