| /* |
| * Copyright (c) 1998, 2002, Oracle and/or its affiliates. All rights reserved. |
| * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
| * |
| * This code is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 only, as |
| * published by the Free Software Foundation. Oracle designates this |
| * particular file as subject to the "Classpath" exception as provided |
| * by Oracle in the LICENSE file that accompanied this code. |
| * |
| * This code is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * version 2 for more details (a copy is included in the LICENSE file that |
| * accompanied this code). |
| * |
| * You should have received a copy of the GNU General Public License version |
| * 2 along with this work; if not, write to the Free Software Foundation, |
| * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. |
| * |
| * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA |
| * or visit www.oracle.com if you need additional information or have any |
| * questions. |
| */ |
| |
| package javax.sound.midi; |
| |
| /** |
| * A <code>SysexMessage</code> object represents a MIDI system exclusive message. |
| * <p> |
| * When a system exclusive message is read from a MIDI file, it always has |
| * a defined length. Data from a system exclusive message from a MIDI file |
| * should be stored in the data array of a <code>SysexMessage</code> as |
| * follows: the system exclusive message status byte (0xF0 or 0xF7), all |
| * message data bytes, and finally the end-of-exclusive flag (0xF7). |
| * The length reported by the <code>SysexMessage</code> object is therefore |
| * the length of the system exclusive data plus two: one byte for the status |
| * byte and one for the end-of-exclusive flag. |
| * <p> |
| * As dictated by the Standard MIDI Files specification, two status byte values are legal |
| * for a <code>SysexMessage</code> read from a MIDI file: |
| * <ul> |
| * <li>0xF0: System Exclusive message (same as in MIDI wire protocol)</li> |
| * <li>0xF7: Special System Exclusive message</li> |
| * </ul> |
| * <p> |
| * When Java Sound is used to handle system exclusive data that is being received |
| * using MIDI wire protocol, it should place the data in one or more |
| * <code>SysexMessages</code>. In this case, the length of the system exclusive data |
| * is not known in advance; the end of the system exclusive data is marked by an |
| * end-of-exclusive flag (0xF7) in the MIDI wire byte stream. |
| * <ul> |
| * <li>0xF0: System Exclusive message (same as in MIDI wire protocol)</li> |
| * <li>0xF7: End of Exclusive (EOX)</li> |
| * </ul> |
| * The first <code>SysexMessage</code> object containing data for a particular system |
| * exclusive message should have the status value 0xF0. If this message contains all |
| * the system exclusive data |
| * for the message, it should end with the status byte 0xF7 (EOX). |
| * Otherwise, additional system exclusive data should be sent in one or more |
| * <code>SysexMessages</code> with a status value of 0xF7. The <code>SysexMessage</code> |
| * containing the last of the data for the system exclusive message should end with the |
| * value 0xF7 (EOX) to mark the end of the system exclusive message. |
| * <p> |
| * If system exclusive data from <code>SysexMessages</code> objects is being transmitted |
| * using MIDI wire protocol, only the initial 0xF0 status byte, the system exclusive |
| * data itself, and the final 0xF7 (EOX) byte should be propagated; any 0xF7 status |
| * bytes used to indicate that a <code>SysexMessage</code> contains continuing system |
| * exclusive data should not be propagated via MIDI wire protocol. |
| * |
| * @author David Rivas |
| * @author Kara Kytle |
| * @author Florian Bomers |
| */ |
| public class SysexMessage extends MidiMessage { |
| |
| |
| // Status byte defines |
| |
| |
| /** |
| * Status byte for System Exclusive message (0xF0, or 240). |
| * @see MidiMessage#getStatus |
| */ |
| public static final int SYSTEM_EXCLUSIVE = 0xF0; // 240 |
| |
| |
| /** |
| * Status byte for Special System Exclusive message (0xF7, or 247), which is used |
| * in MIDI files. It has the same value as END_OF_EXCLUSIVE, which |
| * is used in the real-time "MIDI wire" protocol. |
| * @see MidiMessage#getStatus |
| */ |
| public static final int SPECIAL_SYSTEM_EXCLUSIVE = 0xF7; // 247 |
| |
| |
| // Instance variables |
| |
| |
| /* |
| * The data bytes for this system exclusive message. These are |
| * initialized to <code>null</code> and are set explicitly |
| * by {@link #setMessage(int, byte[], int, long) setMessage}. |
| */ |
| //protected byte[] data = null; |
| |
| |
| /** |
| * Constructs a new <code>SysexMessage</code>. The |
| * contents of the new message are guaranteed to specify |
| * a valid MIDI message. Subsequently, you may set the |
| * contents of the message using one of the <code>setMessage</code> |
| * methods. |
| * @see #setMessage |
| */ |
| public SysexMessage() { |
| this(new byte[2]); |
| // Default sysex message data: SOX followed by EOX |
| data[0] = (byte) (SYSTEM_EXCLUSIVE & 0xFF); |
| data[1] = (byte) (ShortMessage.END_OF_EXCLUSIVE & 0xFF); |
| } |
| |
| /** |
| * Constructs a new {@code SysexMessage} and sets the data for |
| * the message. The first byte of the data array must be a valid system |
| * exclusive status byte (0xF0 or 0xF7). |
| * The contents of the message can be changed by using one of |
| * the {@code setMessage} methods. |
| * |
| * @param data the system exclusive message data including the status byte |
| * @param length the length of the valid message data in the array, |
| * including the status byte; it should be non-negative and less than |
| * or equal to {@code data.length} |
| * @throws InvalidMidiDataException if the parameter values |
| * do not specify a valid MIDI meta message. |
| * @see #setMessage(byte[], int) |
| * @see #setMessage(int, byte[], int) |
| * @see #getData() |
| * @since 1.7 |
| */ |
| public SysexMessage(byte[] data, int length) |
| throws InvalidMidiDataException { |
| super(null); |
| setMessage(data, length); |
| } |
| |
| /** |
| * Constructs a new {@code SysexMessage} and sets the data for the message. |
| * The contents of the message can be changed by using one of |
| * the {@code setMessage} methods. |
| * |
| * @param status the status byte for the message; it must be a valid system |
| * exclusive status byte (0xF0 or 0xF7) |
| * @param data the system exclusive message data (without the status byte) |
| * @param length the length of the valid message data in the array; |
| * it should be non-negative and less than or equal to |
| * {@code data.length} |
| * @throws InvalidMidiDataException if the parameter values |
| * do not specify a valid MIDI meta message. |
| * @see #setMessage(byte[], int) |
| * @see #setMessage(int, byte[], int) |
| * @see #getData() |
| * @since 1.7 |
| */ |
| public SysexMessage(int status, byte[] data, int length) |
| throws InvalidMidiDataException { |
| super(null); |
| setMessage(status, data, length); |
| } |
| |
| |
| /** |
| * Constructs a new <code>SysexMessage</code>. |
| * @param data an array of bytes containing the complete message. |
| * The message data may be changed using the <code>setMessage</code> |
| * method. |
| * @see #setMessage |
| */ |
| protected SysexMessage(byte[] data) { |
| super(data); |
| } |
| |
| |
| /** |
| * Sets the data for the system exclusive message. The |
| * first byte of the data array must be a valid system |
| * exclusive status byte (0xF0 or 0xF7). |
| * @param data the system exclusive message data |
| * @param length the length of the valid message data in |
| * the array, including the status byte. |
| */ |
| public void setMessage(byte[] data, int length) throws InvalidMidiDataException { |
| int status = (data[0] & 0xFF); |
| if ((status != 0xF0) && (status != 0xF7)) { |
| throw new InvalidMidiDataException("Invalid status byte for sysex message: 0x" + Integer.toHexString(status)); |
| } |
| super.setMessage(data, length); |
| } |
| |
| |
| /** |
| * Sets the data for the system exclusive message. |
| * @param status the status byte for the message (0xF0 or 0xF7) |
| * @param data the system exclusive message data |
| * @param length the length of the valid message data in |
| * the array |
| */ |
| public void setMessage(int status, byte[] data, int length) throws InvalidMidiDataException { |
| if ( (status != 0xF0) && (status != 0xF7) ) { |
| throw new InvalidMidiDataException("Invalid status byte for sysex message: 0x" + Integer.toHexString(status)); |
| } |
| if (length < 0 || length > data.length) { |
| throw new IndexOutOfBoundsException("length out of bounds: "+length); |
| } |
| this.length = length + 1; |
| |
| if (this.data==null || this.data.length < this.length) { |
| this.data = new byte[this.length]; |
| } |
| |
| this.data[0] = (byte) (status & 0xFF); |
| if (length > 0) { |
| System.arraycopy(data, 0, this.data, 1, length); |
| } |
| } |
| |
| |
| /** |
| * Obtains a copy of the data for the system exclusive message. |
| * The returned array of bytes does not include the status byte. |
| * @return array containing the system exclusive message data. |
| */ |
| public byte[] getData() { |
| byte[] returnedArray = new byte[length - 1]; |
| System.arraycopy(data, 1, returnedArray, 0, (length - 1)); |
| return returnedArray; |
| } |
| |
| |
| /** |
| * Creates a new object of the same class and with the same contents |
| * as this object. |
| * @return a clone of this instance |
| */ |
| public Object clone() { |
| byte[] newData = new byte[length]; |
| System.arraycopy(data, 0, newData, 0, newData.length); |
| SysexMessage event = new SysexMessage(newData); |
| return event; |
| } |
| } |