blob: 65cfc1a60bdc4e7b6d7151505992b58f3ad6be48 [file] [log] [blame]
/******************************************************************************
*
* Copyright (C) 2017 ST Microelectronics S.A.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
*
******************************************************************************/
#define LOG_TAG "NfcNciHalWrapper"
#include <cutils/properties.h>
#include <errno.h>
#include <hardware/nfc.h>
#include <log/log.h>
#include <string.h>
#include <unistd.h>
#include "android_logmsg.h"
#include "hal_fd.h"
#include "halcore.h"
extern void HalCoreCallback(void* context, uint32_t event, const void* d,
size_t length);
extern bool I2cOpenLayer(void* dev, HAL_CALLBACK callb, HALHANDLE* pHandle);
extern void I2cCloseLayer();
extern void I2cRecovery();
typedef struct {
struct nfc_nci_device nci_device; // nci_device must be first struct member
// below declarations are private variables within HAL
nfc_stack_callback_t* p_cback;
nfc_stack_data_callback_t* p_data_cback;
HALHANDLE hHAL;
} st21nfc_dev_t;
static void halWrapperDataCallback(uint16_t data_len, uint8_t* p_data);
static void halWrapperCallback(uint8_t event, uint8_t event_status);
nfc_stack_callback_t* mHalWrapperCallback = NULL;
nfc_stack_data_callback_t* mHalWrapperDataCallback = NULL;
hal_wrapper_state_e mHalWrapperState = HAL_WRAPPER_STATE_CLOSED;
HALHANDLE mHalHandle = NULL;
uint8_t mClfMode;
uint8_t mFwUpdateTaskMask;
int mRetryFwDwl;
uint8_t mFwUpdateResMask = 0;
uint8_t* ConfigBuffer = NULL;
uint8_t mError_count = 0;
bool mIsActiveRW = false;
pthread_mutex_t mutex = PTHREAD_MUTEX_INITIALIZER;
pthread_cond_t ready_cond = PTHREAD_COND_INITIALIZER;
static const uint8_t ApduGetAtr[] = {0x2F, 0x04, 0x05, 0x80,
0x8A, 0x00, 0x00, 0x04};
static const uint8_t nciHeaderPropSetConfig[9] = {0x2F, 0x02, 0x98, 0x04, 0x00,
0x14, 0x01, 0x00, 0x92};
static uint8_t nciPropEnableFwDbgTraces[256];
static uint8_t nciPropGetFwDbgTracesConfig[] = {0x2F, 0x02, 0x05, 0x03,
0x00, 0x14, 0x01, 0x00};
static bool isDebuggable;
bool mReadFwConfigDone = false;
bool mHciCreditLent = false;
bool mfactoryReset = false;
bool ready_flag = 0;
bool mTimerStarted = false;
bool forceRecover = false;
void wait_ready() {
pthread_mutex_lock(&mutex);
while (!ready_flag) {
pthread_cond_wait(&ready_cond, &mutex);
}
pthread_mutex_unlock(&mutex);
}
void set_ready(bool ready) {
pthread_mutex_lock(&mutex);
ready_flag = ready;
pthread_cond_signal(&ready_cond);
pthread_mutex_unlock(&mutex);
}
bool hal_wrapper_open(st21nfc_dev_t* dev, nfc_stack_callback_t* p_cback,
nfc_stack_data_callback_t* p_data_cback,
HALHANDLE* pHandle) {
bool result;
STLOG_HAL_D("%s", __func__);
mFwUpdateResMask = hal_fd_init();
mRetryFwDwl = 5;
mFwUpdateTaskMask = 0;
mHalWrapperState = HAL_WRAPPER_STATE_OPEN;
mHciCreditLent = false;
mReadFwConfigDone = false;
mError_count = 0;
mHalWrapperCallback = p_cback;
mHalWrapperDataCallback = p_data_cback;
dev->p_data_cback = halWrapperDataCallback;
dev->p_cback = halWrapperCallback;
result = I2cOpenLayer(dev, HalCoreCallback, pHandle);
if (!result || !(*pHandle)) {
return -1; // We are doomed, stop it here, NOW !
}
isDebuggable = property_get_int32("ro.debuggable", 0);
mHalHandle = *pHandle;
HalSendDownstreamTimer(mHalHandle, 10000);
return 1;
}
int hal_wrapper_close(int call_cb, int nfc_mode) {
STLOG_HAL_V("%s - Sending PROP_NFC_MODE_SET_CMD(%d)", __func__, nfc_mode);
uint8_t propNfcModeSetCmdQb[] = {0x2f, 0x02, 0x02, 0x02, (uint8_t)nfc_mode};
mHalWrapperState = HAL_WRAPPER_STATE_CLOSING;
// Send PROP_NFC_MODE_SET_CMD
if (!HalSendDownstreamTimer(mHalHandle, propNfcModeSetCmdQb,
sizeof(propNfcModeSetCmdQb), 40)) {
STLOG_HAL_E("NFC-NCI HAL: %s HalSendDownstreamTimer failed", __func__);
return -1;
}
// Let the CLF receive and process this
usleep(50000);
I2cCloseLayer();
if (call_cb) mHalWrapperCallback(HAL_NFC_CLOSE_CPLT_EVT, HAL_NFC_STATUS_OK);
return 1;
}
void hal_wrapper_send_core_config_prop() {
long retlen = 0;
int isfound = 0;
// allocate buffer for setting parameters
ConfigBuffer = (uint8_t*)malloc(256 * sizeof(uint8_t));
if (ConfigBuffer != NULL) {
isfound = GetByteArrayValue(NAME_CORE_CONF_PROP, (char*)ConfigBuffer, 256,
&retlen);
if (isfound > 0) {
STLOG_HAL_V("%s - Enter", __func__);
set_ready(0);
if (!HalSendDownstreamTimer(mHalHandle, ConfigBuffer, retlen, 500)) {
STLOG_HAL_E("NFC-NCI HAL: %s SendDownstream failed", __func__);
}
mHalWrapperState = HAL_WRAPPER_STATE_PROP_CONFIG;
wait_ready();
}
free(ConfigBuffer);
ConfigBuffer = NULL;
}
}
void hal_wrapper_send_vs_config() {
STLOG_HAL_V("%s - Enter", __func__);
set_ready(0);
if (!HalSendDownstreamTimer(mHalHandle, nciPropGetFwDbgTracesConfig,
sizeof(nciPropGetFwDbgTracesConfig), 500)) {
STLOG_HAL_E("%s - SendDownstream failed", __func__);
}
mReadFwConfigDone = true;
wait_ready();
}
void hal_wrapper_send_config() {
hal_wrapper_send_core_config_prop();
mHalWrapperState = HAL_WRAPPER_STATE_PROP_CONFIG;
hal_wrapper_send_vs_config();
}
void hal_wrapper_factoryReset() {
mfactoryReset = true;
STLOG_HAL_V("%s - mfactoryReset = %d", __func__, mfactoryReset);
}
void hal_wrapper_update_complete() {
STLOG_HAL_V("%s ", __func__);
mHalWrapperCallback(HAL_NFC_OPEN_CPLT_EVT, HAL_NFC_STATUS_OK);
mHalWrapperState = HAL_WRAPPER_STATE_OPEN_CPLT;
}
void halWrapperDataCallback(uint16_t data_len, uint8_t* p_data) {
uint8_t propNfcModeSetCmdOn[] = {0x2f, 0x02, 0x02, 0x02, 0x01};
uint8_t coreInitCmd[] = {0x20, 0x01, 0x02, 0x00, 0x00};
uint8_t coreResetCmd[] = {0x20, 0x00, 0x01, 0x01};
unsigned long num = 0;
int nciPropEnableFwDbgTraces_size = sizeof(nciPropEnableFwDbgTraces);
switch (mHalWrapperState) {
case HAL_WRAPPER_STATE_CLOSED: // 0
STLOG_HAL_V("%s - mHalWrapperState = HAL_WRAPPER_STATE_CLOSED", __func__);
break;
case HAL_WRAPPER_STATE_OPEN: // 1
// CORE_RESET_NTF
STLOG_HAL_V("%s - mHalWrapperState = HAL_WRAPPER_STATE_OPEN", __func__);
if ((p_data[0] == 0x60) && (p_data[1] == 0x00)) {
mFwUpdateTaskMask = ft_cmd_HwReset(p_data, &mClfMode);
if (mfactoryReset == true) {
STLOG_HAL_V(
"%s - first boot after factory reset detected - start FW update",
__func__);
if ((mFwUpdateResMask & FW_PATCH_AVAILABLE) &&
(mFwUpdateResMask & FW_CUSTOM_PARAM_AVAILABLE)) {
mFwUpdateTaskMask = FW_UPDATE_NEEDED | CONF_UPDATE_NEEDED;
mfactoryReset = false;
}
}
STLOG_HAL_V(
"%s - mFwUpdateTaskMask = %d, mClfMode = %d, mRetryFwDwl = %d",
__func__, mFwUpdateTaskMask, mClfMode, mRetryFwDwl);
// CLF in MODE LOADER & Update needed.
if (mClfMode == FT_CLF_MODE_LOADER) {
HalSendDownstreamStopTimer(mHalHandle);
STLOG_HAL_V("%s --- CLF mode is LOADER ---", __func__);
if (mRetryFwDwl == 0) {
STLOG_HAL_V(
"%s - Reached maximum nb of retries, FW update failed, exiting",
__func__);
mHalWrapperCallback(HAL_NFC_OPEN_CPLT_EVT, HAL_NFC_STATUS_FAILED);
I2cCloseLayer();
} else {
STLOG_HAL_V("%s - Send APDU_GET_ATR_CMD", __func__);
mRetryFwDwl--;
if (!HalSendDownstreamTimer(mHalHandle, ApduGetAtr,
sizeof(ApduGetAtr),
FW_TIMER_DURATION)) {
STLOG_HAL_E("%s - SendDownstream failed", __func__);
}
mHalWrapperState = HAL_WRAPPER_STATE_UPDATE;
}
} else if (mFwUpdateTaskMask == 0 || mRetryFwDwl == 0) {
STLOG_HAL_V("%s - Proceeding with normal startup", __func__);
if (p_data[3] == 0x01) {
// Normal mode, start HAL
mHalWrapperCallback(HAL_NFC_OPEN_CPLT_EVT, HAL_NFC_STATUS_OK);
mHalWrapperState = HAL_WRAPPER_STATE_OPEN_CPLT;
} else {
// No more retries or CLF not in correct mode
mHalWrapperCallback(HAL_NFC_OPEN_CPLT_EVT, HAL_NFC_STATUS_FAILED);
}
// CLF in MODE ROUTER & Update needed.
} else if (mClfMode == FT_CLF_MODE_ROUTER) {
if ((mFwUpdateTaskMask & FW_UPDATE_NEEDED) &&
(mFwUpdateResMask & FW_PATCH_AVAILABLE)) {
STLOG_HAL_V(
"%s - CLF in ROUTER mode, FW update needed, try upgrade FW -",
__func__);
mRetryFwDwl--;
if (!HalSendDownstream(mHalHandle, coreResetCmd,
sizeof(coreResetCmd))) {
STLOG_HAL_E("%s - SendDownstream failed", __func__);
}
mHalWrapperState = HAL_WRAPPER_STATE_EXIT_HIBERNATE_INTERNAL;
} else if ((mFwUpdateTaskMask & CONF_UPDATE_NEEDED) &&
(mFwUpdateResMask & FW_CUSTOM_PARAM_AVAILABLE)) {
if (!HalSendDownstream(mHalHandle, coreResetCmd,
sizeof(coreResetCmd))) {
STLOG_HAL_E("%s - SendDownstream failed", __func__);
}
mHalWrapperState = HAL_WRAPPER_STATE_APPLY_CUSTOM_PARAM;
} else if ((mFwUpdateTaskMask & UWB_CONF_UPDATE_NEEDED) &&
(mFwUpdateResMask & FW_UWB_PARAM_AVAILABLE)) {
if (!HalSendDownstream(mHalHandle, coreResetCmd,
sizeof(coreResetCmd))) {
STLOG_HAL_E("%s - SendDownstream failed", __func__);
}
mHalWrapperState = HAL_WRAPPER_STATE_APPLY_UWB_PARAM;
}
}
} else {
mHalWrapperDataCallback(data_len, p_data);
}
break;
case HAL_WRAPPER_STATE_OPEN_CPLT: // 2
STLOG_HAL_V("%s - mHalWrapperState = HAL_WRAPPER_STATE_OPEN_CPLT",
__func__);
// CORE_INIT_RSP
if ((p_data[0] == 0x40) && (p_data[1] == 0x01)) {
} else if ((p_data[0] == 0x60) && (p_data[1] == 0x06)) {
STLOG_HAL_V("%s - Sending PROP_NFC_MODE_SET_CMD", __func__);
// Send PROP_NFC_MODE_SET_CMD(ON)
if (!HalSendDownstreamTimer(mHalHandle, propNfcModeSetCmdOn,
sizeof(propNfcModeSetCmdOn), 100)) {
STLOG_HAL_E("NFC-NCI HAL: %s HalSendDownstreamTimer failed",
__func__);
}
mHalWrapperState = HAL_WRAPPER_STATE_NFC_ENABLE_ON;
} else {
mHalWrapperDataCallback(data_len, p_data);
}
break;
case HAL_WRAPPER_STATE_NFC_ENABLE_ON: // 3
STLOG_HAL_V("%s - mHalWrapperState = HAL_WRAPPER_STATE_NFC_ENABLE_ON",
__func__);
// PROP_NFC_MODE_SET_RSP
if ((p_data[0] == 0x4f) && (p_data[1] == 0x02)) {
// DO nothing: wait for core_reset_ntf or timer timeout
}
// CORE_RESET_NTF
else if ((p_data[0] == 0x60) && (p_data[1] == 0x00)) {
// Stop timer
HalSendDownstreamStopTimer(mHalHandle);
if (forceRecover == true) {
forceRecover = false;
mHalWrapperDataCallback(data_len, p_data);
break;
}
// Send CORE_INIT_CMD
STLOG_HAL_V("%s - Sending CORE_INIT_CMD", __func__);
if (!HalSendDownstream(mHalHandle, coreInitCmd, sizeof(coreInitCmd))) {
STLOG_HAL_E("NFC-NCI HAL: %s SendDownstream failed", __func__);
}
}
// CORE_INIT_RSP
else if ((p_data[0] == 0x40) && (p_data[1] == 0x01)) {
STLOG_HAL_D("%s - NFC mode enabled", __func__);
// Do we need to lend a credit ?
if (p_data[13] == 0x00) {
STLOG_HAL_D("%s - 1 credit lent", __func__);
p_data[13] = 0x01;
mHciCreditLent = true;
}
mHalWrapperState = HAL_WRAPPER_STATE_READY;
mHalWrapperDataCallback(data_len, p_data);
}
break;
case HAL_WRAPPER_STATE_PROP_CONFIG: // 4
STLOG_HAL_V("%s - mHalWrapperState = HAL_WRAPPER_STATE_PROP_CONFIG",
__func__);
// CORE_SET_CONFIG_RSP
if ((p_data[0] == 0x40) && (p_data[1] == 0x02)) {
HalSendDownstreamStopTimer(mHalHandle);
set_ready(1);
STLOG_HAL_V("%s - Received config RSP, read FW dDBG config", __func__);
} else if (mHciCreditLent && (p_data[0] == 0x60) && (p_data[1] == 0x06)) {
// CORE_CONN_CREDITS_NTF
if (p_data[4] == 0x01) { // HCI connection
mHciCreditLent = false;
STLOG_HAL_D("%s - credit returned", __func__);
if (p_data[5] == 0x01) {
// no need to send this.
break;
} else {
if (p_data[5] != 0x00 && p_data[5] != 0xFF) {
// send with 1 less
p_data[5]--;
}
}
}
mHalWrapperDataCallback(data_len, p_data);
} else if (p_data[0] == 0x4f) {
// PROP_RSP
if (mReadFwConfigDone == true) {
mReadFwConfigDone = false;
HalSendDownstreamStopTimer(mHalHandle);
set_ready(1);
// NFC_STATUS_OK
if (p_data[3] == 0x00) {
bool confNeeded = false;
bool firmware_debug_enabled =
property_get_int32("persist.vendor.nfc.firmware_debug_enabled", 0);
// Check if FW DBG shall be set
if (GetNumValue(NAME_STNFC_FW_DEBUG_ENABLED, &num, sizeof(num)) ||
isDebuggable) {
if (firmware_debug_enabled) num = 1;
// If conf file indicate set needed and not yet enabled
if ((num == 1) && (p_data[7] == 0x00)) {
STLOG_HAL_D("%s - FW DBG traces enabling needed", __func__);
nciPropEnableFwDbgTraces[9] = 0x01;
confNeeded = true;
} else if ((num == 0) && (p_data[7] == 0x01)) {
STLOG_HAL_D("%s - FW DBG traces disabling needed", __func__);
nciPropEnableFwDbgTraces[9] = 0x00;
confNeeded = true;
} else {
STLOG_HAL_D("%s - No changes in FW DBG traces config needed",
__func__);
}
if (data_len < 9 || p_data[6] == 0 || p_data[6] < (data_len - 7)
|| p_data[6] > (sizeof(nciPropEnableFwDbgTraces) - 9)) {
if (confNeeded) {
android_errorWriteLog(0x534e4554, "169328517");
confNeeded = false;
}
}
if (confNeeded) {
memcpy(nciPropEnableFwDbgTraces, nciHeaderPropSetConfig, 9);
memcpy(&nciPropEnableFwDbgTraces[10], &p_data[8],
p_data[6] - 1);
if ((9 + p_data[6]) < sizeof(nciPropEnableFwDbgTraces)) {
nciPropEnableFwDbgTraces_size = 9 + p_data[6];
}
confNeeded = false;
if (!HalSendDownstream(mHalHandle, nciPropEnableFwDbgTraces,
nciPropEnableFwDbgTraces_size)) {
STLOG_HAL_E("%s - SendDownstream failed", __func__);
}
break;
}
}
}
}
// Exit state, all processing done
mHalWrapperCallback(HAL_NFC_POST_INIT_CPLT_EVT, HAL_NFC_STATUS_OK);
mHalWrapperState = HAL_WRAPPER_STATE_READY;
}
break;
case HAL_WRAPPER_STATE_READY: // 5
STLOG_HAL_V("%s - mHalWrapperState = HAL_WRAPPER_STATE_READY", __func__);
if (!((p_data[0] == 0x60) && (p_data[3] == 0xa0))) {
if (mHciCreditLent && (p_data[0] == 0x60) && (p_data[1] == 0x06)) {
if (p_data[4] == 0x01) { // HCI connection
mHciCreditLent = false;
STLOG_HAL_D("%s - credit returned", __func__);
if (p_data[5] == 0x01) {
// no need to send this.
break;
} else {
if (p_data[5] != 0x00 && p_data[5] != 0xFF) {
// send with 1 less
p_data[5]--;
}
}
}
} else if ((p_data[0] == 0x6f) && (p_data[1] == 0x05)) {
// start timer
mTimerStarted = true;
HalSendDownstreamTimer(mHalHandle, 5000);
mIsActiveRW = true;
} else if ((p_data[0] == 0x6f) && (p_data[1] == 0x06)) {
// stop timer
if (mTimerStarted) {
HalSendDownstreamStopTimer(mHalHandle);
mTimerStarted = false;
}
if(mIsActiveRW == true) {
mIsActiveRW = false;
} else {
mError_count ++;
STLOG_HAL_E("Error Act -> Act count=%d", mError_count);
if(mError_count > 20) {
mError_count = 0;
STLOG_HAL_E("NFC Recovery Start");
mTimerStarted = true;
HalSendDownstreamTimer(mHalHandle, 1);
}
}
} else if (((p_data[0] == 0x61) && (p_data[1] == 0x05)) ||
((p_data[0] == 0x61) && (p_data[1] == 0x03))) {
mError_count = 0;
// stop timer
if (mTimerStarted) {
HalSendDownstreamStopTimer(mHalHandle);
mTimerStarted = false;
}
} else if ((p_data[0] == 0x60) && (p_data[1] == 0x07) && (p_data[3] == 0xE1)) {
// Core Generic Error - Buffer Overflow Ntf - Restart all
STLOG_HAL_E("Core Generic Error - restart");
p_data[0] = 0x60;
p_data[1] = 0x00;
p_data[2] = 0x03;
p_data[3] = 0xE1;
p_data[4] = 0x00;
p_data[5] = 0x00;
data_len = 0x6;
}
mHalWrapperDataCallback(data_len, p_data);
} else {
STLOG_HAL_V("%s - Core reset notification - Nfc mode ", __func__);
}
break;
case HAL_WRAPPER_STATE_CLOSING: // 6
STLOG_HAL_V("%s - mHalWrapperState = HAL_WRAPPER_STATE_CLOSING",
__func__);
hal_fd_close();
if ((p_data[0] == 0x4f) && (p_data[1] == 0x02)) {
// intercept this expected message, don t forward.
mHalWrapperState = HAL_WRAPPER_STATE_CLOSED;
} else {
mHalWrapperDataCallback(data_len, p_data);
}
break;
case HAL_WRAPPER_STATE_EXIT_HIBERNATE_INTERNAL: // 6
STLOG_HAL_V(
"%s - mHalWrapperState = HAL_WRAPPER_STATE_EXIT_HIBERNATE_INTERNAL",
__func__);
ExitHibernateHandler(mHalHandle, data_len, p_data);
break;
case HAL_WRAPPER_STATE_UPDATE: // 7
STLOG_HAL_V("%s - mHalWrapperState = HAL_WRAPPER_STATE_UPDATE", __func__);
UpdateHandler(mHalHandle, data_len, p_data);
break;
case HAL_WRAPPER_STATE_APPLY_CUSTOM_PARAM: // 8
STLOG_HAL_V(
"%s - mHalWrapperState = HAL_WRAPPER_STATE_APPLY_CUSTOM_PARAM",
__func__);
ApplyCustomParamHandler(mHalHandle, data_len, p_data);
break;
case HAL_WRAPPER_STATE_APPLY_UWB_PARAM: // 9
STLOG_HAL_V("%s - mHalWrapperState = HAL_WRAPPER_STATE_APPLY_UWB_PARAM",
__func__);
ApplyUwbParamHandler(mHalHandle, data_len, p_data);
break;
case HAL_WRAPPER_STATE_SET_ACTIVERW_TIMER: // 10
if (mIsActiveRW == true) {
STLOG_HAL_V(
"%s - mHalWrapperState = "
"HAL_WRAPPER_STATE_SET_ACTIVERW_TIMER",
__func__);
// start timer
mTimerStarted = true;
HalSendDownstreamTimer(mHalHandle, 5000);
// Chip state should back to Active
// at screen off state.
}
mHalWrapperState = HAL_WRAPPER_STATE_READY;
mHalWrapperDataCallback(data_len, p_data);
break;
}
}
static void halWrapperCallback(uint8_t event, __attribute__((unused))uint8_t event_status) {
uint8_t coreInitCmd[] = {0x20, 0x01, 0x02, 0x00, 0x00};
switch (mHalWrapperState) {
case HAL_WRAPPER_STATE_CLOSING:
if (event == HAL_WRAPPER_TIMEOUT_EVT) {
STLOG_HAL_D("NFC-NCI HAL: %s Timeout. Close anyway", __func__);
HalSendDownstreamStopTimer(mHalHandle);
hal_fd_close();
mHalWrapperState = HAL_WRAPPER_STATE_CLOSED;
return;
}
break;
case HAL_WRAPPER_STATE_OPEN:
if (event == HAL_WRAPPER_TIMEOUT_EVT) {
STLOG_HAL_D("NFC-NCI HAL: %s Timeout accessing the CLF.", __func__);
HalSendDownstreamStopTimer(mHalHandle);
I2cRecovery();
return;
}
break;
case HAL_WRAPPER_STATE_CLOSED:
if (event == HAL_WRAPPER_TIMEOUT_EVT) {
STLOG_HAL_D("NFC-NCI HAL: %s Timeout. Close anyway", __func__);
HalSendDownstreamStopTimer(mHalHandle);
return;
}
break;
case HAL_WRAPPER_STATE_UPDATE:
if (event == HAL_WRAPPER_TIMEOUT_EVT) {
STLOG_HAL_E("%s - Timer for FW update procedure timeout, retry",
__func__);
HalSendDownstreamStopTimer(mHalHandle);
resetHandlerState();
I2cResetPulse();
mHalWrapperState = HAL_WRAPPER_STATE_OPEN;
}
break;
case HAL_WRAPPER_STATE_NFC_ENABLE_ON:
if (event == HAL_WRAPPER_TIMEOUT_EVT) {
// timeout
// Send CORE_INIT_CMD
STLOG_HAL_V("%s - Sending CORE_INIT_CMD", __func__);
if (!HalSendDownstream(mHalHandle, coreInitCmd, sizeof(coreInitCmd))) {
STLOG_HAL_E("NFC-NCI HAL: %s SendDownstream failed", __func__);
}
return;
}
break;
case HAL_WRAPPER_STATE_PROP_CONFIG:
if (event == HAL_WRAPPER_TIMEOUT_EVT) {
STLOG_HAL_E("%s - Timer when sending conf parameters, retry", __func__);
HalSendDownstreamStopTimer(mHalHandle);
resetHandlerState();
I2cResetPulse();
mHalWrapperState = HAL_WRAPPER_STATE_OPEN;
}
break;
case HAL_WRAPPER_STATE_READY:
if (event == HAL_WRAPPER_TIMEOUT_EVT) {
if (mTimerStarted) {
STLOG_HAL_E("NFC-NCI HAL: %s Timeout.. Recover", __func__);
STLOG_HAL_E("%s mIsActiveRW = %d", __func__, mIsActiveRW);
HalSendDownstreamStopTimer(mHalHandle);
mTimerStarted = false;
forceRecover = true;
resetHandlerState();
I2cResetPulse();
mHalWrapperState = HAL_WRAPPER_STATE_OPEN;
}
return;
}
break;
default:
break;
}
mHalWrapperCallback(event, event_status);
}
/*******************************************************************************
**
** Function nfc_set_state
**
** Description Set the state of NFC stack
**
** Returns void
**
*******************************************************************************/
void hal_wrapper_set_state(hal_wrapper_state_e new_wrapper_state) {
ALOGD("nfc_set_state %d->%d", mHalWrapperState, new_wrapper_state);
mHalWrapperState = new_wrapper_state;
}