| /* |
| * Copyright (C) 2016 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include <errno.h> |
| |
| #include "common.h" |
| #include "roamcommand.h" |
| #include "vendor_definitions.h" |
| |
| RoamCommand::RoamCommand(wifi_handle handle, int id, u32 vendor_id, u32 subcmd) |
| : WifiVendorCommand(handle, id, vendor_id, subcmd) |
| { |
| } |
| |
| RoamCommand::~RoamCommand() |
| { |
| } |
| |
| /* This function implements creation of Vendor command */ |
| int RoamCommand::create() { |
| int ret = mMsg.create(NL80211_CMD_VENDOR, 0, 0); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| /* Insert the oui in the msg */ |
| ret = mMsg.put_u32(NL80211_ATTR_VENDOR_ID, mVendor_id); |
| if (ret < 0) |
| goto out; |
| /* Insert the subcmd in the msg */ |
| ret = mMsg.put_u32(NL80211_ATTR_VENDOR_SUBCMD, mSubcmd); |
| if (ret < 0) |
| goto out; |
| |
| ALOGV("%s: mVendor_id = %d, Subcmd = %d.", |
| __FUNCTION__, mVendor_id, mSubcmd); |
| out: |
| return ret; |
| } |
| |
| int RoamCommand::requestResponse() |
| { |
| return WifiCommand::requestResponse(mMsg); |
| } |
| |
| wifi_error wifi_set_bssid_blacklist(wifi_request_id id, |
| wifi_interface_handle iface, |
| wifi_bssid_params params) |
| { |
| int ret = 0, i; |
| RoamCommand *roamCommand; |
| struct nlattr *nlData, *nlBssids; |
| interface_info *ifaceInfo = getIfaceInfo(iface); |
| wifi_handle wifiHandle = getWifiHandle(iface); |
| hal_info *info = getHalInfo(wifiHandle); |
| |
| if (!(info->supported_feature_set & WIFI_FEATURE_GSCAN)) { |
| ALOGE("%s: GSCAN is not supported by driver", |
| __FUNCTION__); |
| return WIFI_ERROR_NOT_SUPPORTED; |
| } |
| |
| for (i = 0; i < params.num_bssid; i++) { |
| ALOGV("BSSID: %d : %02x:%02x:%02x:%02x:%02x:%02x", i, |
| params.bssids[i][0], params.bssids[i][1], |
| params.bssids[i][2], params.bssids[i][3], |
| params.bssids[i][4], params.bssids[i][5]); |
| } |
| |
| roamCommand = |
| new RoamCommand(wifiHandle, |
| id, |
| OUI_QCA, |
| QCA_NL80211_VENDOR_SUBCMD_ROAM); |
| if (roamCommand == NULL) { |
| ALOGE("%s: Error roamCommand NULL", __FUNCTION__); |
| return WIFI_ERROR_UNKNOWN; |
| } |
| |
| /* Create the NL message. */ |
| ret = roamCommand->create(); |
| if (ret < 0) |
| goto cleanup; |
| |
| /* Set the interface Id of the message. */ |
| ret = roamCommand->set_iface_id(ifaceInfo->name); |
| if (ret < 0) |
| goto cleanup; |
| |
| /* Add the vendor specific attributes for the NL command. */ |
| nlData = roamCommand->attr_start(NL80211_ATTR_VENDOR_DATA); |
| if (!nlData) |
| goto cleanup; |
| |
| if (roamCommand->put_u32(QCA_WLAN_VENDOR_ATTR_ROAMING_SUBCMD, |
| QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SET_BLACKLIST_BSSID) || |
| roamCommand->put_u32( |
| QCA_WLAN_VENDOR_ATTR_ROAMING_REQ_ID, |
| id) || |
| roamCommand->put_u32( |
| QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_NUM_BSSID, |
| params.num_bssid)) { |
| goto cleanup; |
| } |
| |
| nlBssids = roamCommand->attr_start( |
| QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS); |
| for (i = 0; i < params.num_bssid; i++) { |
| struct nlattr *nl_ssid = roamCommand->attr_start(i); |
| |
| if (roamCommand->put_addr( |
| QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_BSSID, |
| (u8 *)params.bssids[i])) { |
| goto cleanup; |
| } |
| |
| roamCommand->attr_end(nl_ssid); |
| } |
| roamCommand->attr_end(nlBssids); |
| |
| roamCommand->attr_end(nlData); |
| |
| ret = roamCommand->requestResponse(); |
| if (ret != 0) { |
| ALOGE("wifi_set_bssid_blacklist(): requestResponse Error:%d", ret); |
| } |
| |
| cleanup: |
| delete roamCommand; |
| return (wifi_error)ret; |
| |
| } |
| |
| wifi_error wifi_set_ssid_white_list(wifi_request_id id, wifi_interface_handle iface, |
| int num_networks, ssid_t *ssid_list) |
| { |
| wifi_error result = WIFI_SUCCESS; |
| int ret = 0, i; |
| RoamCommand *roamCommand; |
| struct nlattr *nlData, *nlSsids; |
| interface_info *ifaceInfo = getIfaceInfo(iface); |
| wifi_handle wifiHandle = getWifiHandle(iface); |
| char ssid[MAX_SSID_LENGTH + 1]; |
| |
| ALOGV("%s: Number of SSIDs : %d", __FUNCTION__, num_networks); |
| |
| roamCommand = new RoamCommand( |
| wifiHandle, |
| id, |
| OUI_QCA, |
| QCA_NL80211_VENDOR_SUBCMD_ROAM); |
| if (roamCommand == NULL) { |
| ALOGE("%s: Failed to create object of RoamCommand class", __FUNCTION__); |
| return WIFI_ERROR_UNKNOWN; |
| } |
| |
| /* Create the NL message. */ |
| ret = roamCommand->create(); |
| if (ret < 0) { |
| ALOGE("%s: Failed to create NL message, Error: %d", __FUNCTION__, ret); |
| result = WIFI_ERROR_UNKNOWN; |
| goto cleanup; |
| } |
| |
| /* Set the interface Id of the message. */ |
| ret = roamCommand->set_iface_id(ifaceInfo->name); |
| if (ret < 0) { |
| ALOGE("%s: Failed to set interface Id of message, Error: %d", __FUNCTION__, ret); |
| result = WIFI_ERROR_UNKNOWN; |
| goto cleanup; |
| } |
| |
| /* Add the vendor specific attributes for the NL command. */ |
| nlData = roamCommand->attr_start(NL80211_ATTR_VENDOR_DATA); |
| if (!nlData) { |
| result = WIFI_ERROR_UNKNOWN; |
| goto cleanup; |
| } |
| |
| if (roamCommand->put_u32(QCA_WLAN_VENDOR_ATTR_ROAMING_SUBCMD, |
| QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SSID_WHITE_LIST) || |
| roamCommand->put_u32(QCA_WLAN_VENDOR_ATTR_ROAMING_REQ_ID, id) || |
| roamCommand->put_u32(QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID_NUM_NETWORKS, |
| num_networks)) { |
| ALOGE("%s: Failed to add vendor atributes, Error: %d", __FUNCTION__, ret); |
| result = WIFI_ERROR_UNKNOWN; |
| goto cleanup; |
| } |
| |
| nlSsids = roamCommand->attr_start(QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID_LIST); |
| for (i = 0; i < num_networks; i++) { |
| struct nlattr *nl_ssid = roamCommand->attr_start(i); |
| |
| memcpy(ssid, ssid_list[i].ssid_str, ssid_list[i].length); |
| ssid[ssid_list[i].length] = '\0'; |
| ALOGV("ssid[%d] : %s", i, ssid); |
| |
| if (roamCommand->put_bytes(QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID, ssid, |
| (ssid_list[i].length + 1))) { |
| ALOGE("%s: Failed to add ssid atribute, Error: %d", __FUNCTION__, ret); |
| result = WIFI_ERROR_UNKNOWN; |
| goto cleanup; |
| } |
| |
| roamCommand->attr_end(nl_ssid); |
| } |
| roamCommand->attr_end(nlSsids); |
| |
| roamCommand->attr_end(nlData); |
| |
| ret = roamCommand->requestResponse(); |
| if (ret != 0) { |
| ALOGE("%s: Failed to send request, Error:%d", __FUNCTION__, ret); |
| result = WIFI_ERROR_UNKNOWN; |
| } |
| |
| cleanup: |
| delete roamCommand; |
| return result; |
| } |
| |
| wifi_error wifi_get_roaming_capabilities(wifi_interface_handle iface, |
| wifi_roaming_capabilities *caps) |
| { |
| wifi_handle wifiHandle = getWifiHandle(iface); |
| hal_info *info = getHalInfo(wifiHandle); |
| |
| if (!caps) { |
| ALOGE("%s: Invalid Buffer provided. Exit", __FUNCTION__); |
| return WIFI_ERROR_INVALID_ARGS; |
| } |
| |
| if (!info) { |
| ALOGE("%s: hal_info is NULL", __FUNCTION__); |
| return WIFI_ERROR_INVALID_ARGS; |
| } |
| |
| memcpy(caps, &info->capa.roaming_capa, sizeof(wifi_roaming_capabilities)); |
| |
| return WIFI_SUCCESS; |
| } |
| |
| wifi_error wifi_configure_roaming(wifi_interface_handle iface, wifi_roaming_config *roaming_config) |
| { |
| wifi_error ret; |
| int requestId; |
| wifi_bssid_params bssid_params; |
| wifi_handle wifiHandle = getWifiHandle(iface); |
| hal_info *info = getHalInfo(wifiHandle); |
| |
| if (!roaming_config) { |
| ALOGE("%s: Invalid Buffer provided. Exit", __FUNCTION__); |
| return WIFI_ERROR_INVALID_ARGS; |
| } |
| |
| /* No request id from caller, so generate one and pass it on to the driver. |
| * Generate it randomly. |
| */ |
| requestId = get_requestid(); |
| |
| /* Set bssid blacklist */ |
| if (roaming_config->num_blacklist_bssid > info->capa.roaming_capa.max_blacklist_size) { |
| ALOGE("%s: Number of blacklist bssids(%d) provided is more than maximum blacklist bssids(%d)" |
| " supported", __FUNCTION__, roaming_config->num_blacklist_bssid, |
| info->capa.roaming_capa.max_blacklist_size); |
| return WIFI_ERROR_NOT_SUPPORTED; |
| } |
| bssid_params.num_bssid = roaming_config->num_blacklist_bssid; |
| |
| memcpy(bssid_params.bssids, roaming_config->blacklist_bssid, |
| (bssid_params.num_bssid * sizeof(mac_addr))); |
| |
| ret = wifi_set_bssid_blacklist(requestId, iface, bssid_params); |
| if (ret != WIFI_SUCCESS) { |
| ALOGE("%s: Failed to configure blacklist bssids", __FUNCTION__); |
| return WIFI_ERROR_UNKNOWN; |
| } |
| |
| /* Set ssid whitelist */ |
| if (roaming_config->num_whitelist_ssid > info->capa.roaming_capa.max_whitelist_size) { |
| ALOGE("%s: Number of whitelist ssid(%d) provided is more than maximum whitelist ssids(%d) " |
| "supported", __FUNCTION__, roaming_config->num_whitelist_ssid, |
| info->capa.roaming_capa.max_whitelist_size); |
| return WIFI_ERROR_NOT_SUPPORTED; |
| } |
| ret = wifi_set_ssid_white_list(requestId, iface, roaming_config->num_whitelist_ssid, |
| roaming_config->whitelist_ssid); |
| if (ret != WIFI_SUCCESS) |
| ALOGE("%s: Failed to configure whitelist ssids", __FUNCTION__); |
| |
| return ret; |
| } |
| |
| /* Enable/disable firmware roaming */ |
| wifi_error wifi_enable_firmware_roaming(wifi_interface_handle iface, fw_roaming_state_t state) |
| { |
| wifi_error result = WIFI_SUCCESS; |
| int requestId, ret; |
| RoamCommand *roamCommand; |
| struct nlattr *nlData; |
| interface_info *ifaceInfo = getIfaceInfo(iface); |
| wifi_handle wifiHandle = getWifiHandle(iface); |
| qca_roaming_policy policy; |
| |
| ALOGV("%s: set firmware roam state : %d", __FUNCTION__, state); |
| |
| if (state == ROAMING_ENABLE) { |
| policy = QCA_ROAMING_ALLOWED_WITHIN_ESS; |
| } else if(state == ROAMING_DISABLE) { |
| policy = QCA_ROAMING_NOT_ALLOWED; |
| } else { |
| ALOGE("%s: Invalid state provided: %d. Exit \n", __FUNCTION__, state); |
| return WIFI_ERROR_INVALID_ARGS; |
| } |
| |
| /* No request id from caller, so generate one and pass it on to the driver. |
| * Generate it randomly. |
| */ |
| requestId = get_requestid(); |
| |
| roamCommand = |
| new RoamCommand(wifiHandle, |
| requestId, |
| OUI_QCA, |
| QCA_NL80211_VENDOR_SUBCMD_ROAMING); |
| if (roamCommand == NULL) { |
| ALOGE("%s: Failed to create object of RoamCommand class", __FUNCTION__); |
| return WIFI_ERROR_UNKNOWN; |
| } |
| |
| /* Create the NL message. */ |
| ret = roamCommand->create(); |
| if (ret < 0) { |
| ALOGE("%s: Failed to create NL message, Error: %d", __FUNCTION__, ret); |
| result = WIFI_ERROR_UNKNOWN; |
| goto cleanup; |
| } |
| |
| /* Set the interface Id of the message. */ |
| ret = roamCommand->set_iface_id(ifaceInfo->name); |
| if (ret < 0) { |
| ALOGE("%s: Failed to set interface Id of message, Error: %d", __FUNCTION__, ret); |
| result = WIFI_ERROR_UNKNOWN; |
| goto cleanup; |
| } |
| |
| /* Add the vendor specific attributes for the NL command. */ |
| nlData = roamCommand->attr_start(NL80211_ATTR_VENDOR_DATA); |
| if (!nlData) { |
| result = WIFI_ERROR_UNKNOWN; |
| goto cleanup; |
| } |
| |
| if (roamCommand->put_u32(QCA_WLAN_VENDOR_ATTR_ROAMING_POLICY, policy)) { |
| ALOGE("%s: Failed to add roaming policy atribute, Error: %d", __FUNCTION__, ret); |
| result = WIFI_ERROR_UNKNOWN; |
| goto cleanup; |
| } |
| |
| roamCommand->attr_end(nlData); |
| |
| ret = roamCommand->requestResponse(); |
| if (ret != 0) { |
| ALOGE("%s: Failed to send request, Error:%d", __FUNCTION__, ret); |
| if (ret == -EBUSY) |
| result = WIFI_ERROR_BUSY; |
| else |
| result = WIFI_ERROR_UNKNOWN; |
| } |
| |
| cleanup: |
| delete roamCommand; |
| return result; |
| } |
