config/display-product.mk

# Display product definitions
PRODUCT_PACKAGES += \
    android.hardware.graphics.mapper@3.0-impl-qti-display \
    android.hardware.graphics.mapper@4.0-impl-qti-display \
    vendor.qti.hardware.display.allocator-service \
    vendor.qti.hardware.display.composer-service \
    android.hardware.memtrack@1.0-impl \
    android.hardware.memtrack@1.0-service \
    gralloc.$(TARGET_BOARD_PLATFORM) \
    lights.$(TARGET_BOARD_PLATFORM) \
    hwcomposer.$(TARGET_BOARD_PLATFORM) \
    memtrack.$(TARGET_BOARD_PLATFORM) \
    libsdmcore \
    libsdmutils \
    libqdMetaData \
    libdisplayconfig.vendor \
    vendor.qti.hardware.display.mapper@2.0.vendor \
    vendor.qti.hardware.display.mapper@3.0.vendor \
    vendor.qti.hardware.display.mapper@4.0.vendor \
    modetest

PRODUCT_PROPERTY_OVERRIDES += \
    persist.demo.hdmirotationlock=false \
    persist.sys.sf.color_saturation=1.0 \
    persist.sys.sf.color_mode=9 \
    debug.sf.hw=0 \
    debug.egl.hw=0 \
    debug.mdpcomp.logs=0 \
    vendor.gralloc.disable_ubwc=0 \
    vendor.display.disable_scaler=0 \
    vendor.display.disable_excl_rect=0 \
    vendor.display.disable_excl_rect_partial_fb=1 \
    vendor.display.comp_mask=0 \
    vendor.display.enable_posted_start_dyn=1 \
    vendor.display.enable_optimize_refresh=1 \
    vendor.display.use_smooth_motion=1

# Enable offline rotator for Bengal.
ifneq ($(TARGET_BOARD_PLATFORM),bengal)
PRODUCT_PROPERTY_OVERRIDES += \
    vendor.display.disable_offline_rotator=1
else
PRODUCT_PROPERTY_OVERRIDES += \
    vendor.display.disable_rotator_ubwc=1 \
    vendor.display.normal_noc_efficiency_factor=0.85 \
    vendor.display.camera_noc_efficiency_factor=0.70 \
    vendor.display.disable_layer_stitch=0 \
    vendor.display.secure_preview_buffer_format=420_sp
endif

ifeq ($(TARGET_BOARD_PLATFORM),kona)
PRODUCT_PROPERTY_OVERRIDES += \
    debug.sf.enable_gl_backpressure=1
endif

ifneq ($(PLATFORM_VERSION), 10)
    PRODUCT_PROPERTY_OVERRIDES +=  vendor.display.enable_async_powermode=0
endif

#Set WCG properties
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.has_wide_color_display=true
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.has_HDR_display=true
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.use_color_management=true
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.wcg_composition_dataspace=143261696
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.protected_contents=true

ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
# Recovery is enabled, logging is enabled
PRODUCT_PROPERTY_OVERRIDES += \
    vendor.display.disable_hw_recovery_dump=0
else
# Recovery is enabled, logging is disabled
PRODUCT_PROPERTY_OVERRIDES += \
    vendor.display.disable_hw_recovery_dump=1
endif

QMAA_ENABLED_HAL_MODULES += display
ifeq ($(TARGET_USES_QMAA),true)
ifeq ($(TARGET_USES_QMAA_OVERRIDE_DISPLAY),true)
PRODUCT_PROPERTY_OVERRIDES += \
    vendor.display.enable_null_display=0
else
TARGET_IS_HEADLESS := true
PRODUCT_PROPERTY_OVERRIDES += \
    vendor.display.enable_null_display=1
endif
endif

# Properties using default value:
#    vendor.display.disable_hw_recovery=0