blob: 64280233cde164e1d8a79362e32b90ce5b7eddb6 [file] [log] [blame]
/*
* Copyright (C) 2008 The Android Open Source Project
* Copyright (c) 2012-2015, The Linux Foundation. All rights reserved.
*
* Not a Contribution, Apache license notifications and license are retained
* for attribution purposes only.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef ANDROID_COPYBIT_INTERFACE_H
#define ANDROID_COPYBIT_INTERFACE_H
#include <hardware/hardware.h>
#include <stdint.h>
#include <sys/cdefs.h>
#include <sys/types.h>
#include <gralloc_priv.h>
__BEGIN_DECLS
/**
* The id of this module
*/
#define COPYBIT_HARDWARE_MODULE_ID "copybit"
/**
* Name of the graphics device to open
*/
#define COPYBIT_HARDWARE_COPYBIT0 "copybit0"
/* supported pixel-formats. these must be compatible with
* graphics/PixelFormat.java, ui/PixelFormat.h, pixelflinger/format.h
*/
enum {
COPYBIT_FORMAT_RGBA_8888 = HAL_PIXEL_FORMAT_RGBA_8888,
COPYBIT_FORMAT_RGBX_8888 = HAL_PIXEL_FORMAT_RGBX_8888,
COPYBIT_FORMAT_RGB_888 = HAL_PIXEL_FORMAT_RGB_888,
COPYBIT_FORMAT_RGB_565 = HAL_PIXEL_FORMAT_RGB_565,
COPYBIT_FORMAT_BGRA_8888 = HAL_PIXEL_FORMAT_BGRA_8888,
COPYBIT_FORMAT_RGBA_5551 = HAL_PIXEL_FORMAT_RGBA_5551,
COPYBIT_FORMAT_RGBA_4444 = HAL_PIXEL_FORMAT_RGBA_4444,
COPYBIT_FORMAT_YCbCr_422_SP = 0x10,
COPYBIT_FORMAT_YCrCb_420_SP = 0x11,
};
/* name for copybit_set_parameter */
enum {
/* Default blit destination is offline buffer */
/* clients to set this to '1', if blitting to framebuffer */
/* and reset to '0', after calling blit/stretch */
COPYBIT_BLIT_TO_FRAMEBUFFER = 0,
/* rotation of the source image in degrees (0 to 359) */
COPYBIT_ROTATION_DEG = 1,
/* plane alpha value */
COPYBIT_PLANE_ALPHA = 2,
/* enable or disable dithering */
COPYBIT_DITHER = 3,
/* transformation applied (this is a superset of COPYBIT_ROTATION_DEG) */
COPYBIT_TRANSFORM = 4,
/* blurs the copied bitmap. The amount of blurring cannot be changed
* at this time. */
COPYBIT_BLUR = 5,
/* Blend mode */
COPYBIT_BLEND_MODE = 6,
/* FB width */
COPYBIT_FRAMEBUFFER_WIDTH = 7,
/* FB height */
COPYBIT_FRAMEBUFFER_HEIGHT = 8,
COPYBIT_FG_LAYER = 9,
};
/* values for copybit_set_parameter(COPYBIT_TRANSFORM) */
enum {
/* flip source image horizontally */
COPYBIT_TRANSFORM_FLIP_H = HAL_TRANSFORM_FLIP_H,
/* flip source image vertically */
COPYBIT_TRANSFORM_FLIP_V = HAL_TRANSFORM_FLIP_V,
/* rotate source image 90 degres */
COPYBIT_TRANSFORM_ROT_90 = HAL_TRANSFORM_ROT_90,
/* rotate source image 180 degres */
COPYBIT_TRANSFORM_ROT_180 = HAL_TRANSFORM_ROT_180,
/* rotate source image 270 degres */
COPYBIT_TRANSFORM_ROT_270 = HAL_TRANSFORM_ROT_270,
};
/* enable/disable value copybit_set_parameter */
enum {
COPYBIT_DISABLE = 0,
COPYBIT_ENABLE = 1
};
/*
* copybit blending values. same as HWC blending values
*/
enum {
/* no blending */
COPYBIT_BLENDING_NONE = 0x0100,
/* ONE / ONE_MINUS_SRC_ALPHA */
COPYBIT_BLENDING_PREMULT = 0x0105,
/* SRC_ALPHA / ONE_MINUS_SRC_ALPHA */
COPYBIT_BLENDING_COVERAGE = 0x0405
};
/* use get_static_info() to query static informations about the hardware */
enum {
/* Maximum amount of minification supported by the hardware*/
COPYBIT_MINIFICATION_LIMIT = 1,
/* Maximum amount of magnification supported by the hardware */
COPYBIT_MAGNIFICATION_LIMIT = 2,
/* Number of fractional bits support by the scaling engine */
COPYBIT_SCALING_FRAC_BITS = 3,
/* Supported rotation step in degres. */
COPYBIT_ROTATION_STEP_DEG = 4,
};
/* Image structure */
struct copybit_image_t {
/* width */
uint32_t w;
/* height */
uint32_t h;
/* format COPYBIT_FORMAT_xxx */
int32_t format;
/* base of buffer with image */
void *base;
/* handle to the image */
native_handle_t* handle;
/* number of pixels added for the stride */
uint32_t horiz_padding;
/* number of pixels added for the vertical stride */
uint32_t vert_padding;
};
/* Rectangle */
struct copybit_rect_t {
/* left */
int l;
/* top */
int t;
/* right */
int r;
/* bottom */
int b;
};
/* Region */
struct copybit_region_t {
int (*next)(struct copybit_region_t const *region, struct copybit_rect_t *rect);
};
/**
* Every hardware module must have a data structure named HAL_MODULE_INFO_SYM
* and the fields of this data structure must begin with hw_module_t
* followed by module specific information.
*/
struct copybit_module_t {
struct hw_module_t common;
};
/**
* Every device data structure must begin with hw_device_t
* followed by module specific public methods and attributes.
*/
struct copybit_device_t {
struct hw_device_t common;
/**
* Set a copybit parameter.
*
* @param dev from open
* @param name one for the COPYBIT_NAME_xxx
* @param value one of the COPYBIT_VALUE_xxx
*
* @return 0 if successful
*/
int (*set_parameter)(struct copybit_device_t *dev, int name, int value);
/**
* Get a static copybit information.
*
* @param dev from open
* @param name one of the COPYBIT_STATIC_xxx
*
* @return value or -EINVAL if error
*/
int (*get)(struct copybit_device_t *dev, int name);
/**
* Execute the bit blit copy operation
*
* @param dev from open
* @param dst is the destination image
* @param src is the source image
* @param region the clip region
*
* @return 0 if successful
*/
int (*blit)(struct copybit_device_t *dev,
struct copybit_image_t const *dst,
struct copybit_image_t const *src,
struct copybit_region_t const *region);
/**
* Give acquire fence to copybit to be used in upcoming stretch
* call
*
* @param dev from open
* @param acquireFenceFd is the acquire fence
*
* @return 0 if successful
*/
int (*set_sync)(struct copybit_device_t *dev,
int acquireFenceFd);
/**
* Execute the stretch bit blit copy operation
*
* @param dev from open
* @param dst is the destination image
* @param src is the source image
* @param dst_rect is the destination rectangle
* @param src_rect is the source rectangle
* @param region the clip region
*
* @return 0 if successful
*/
int (*stretch)(struct copybit_device_t *dev,
struct copybit_image_t const *dst,
struct copybit_image_t const *src,
struct copybit_rect_t const *dst_rect,
struct copybit_rect_t const *src_rect,
struct copybit_region_t const *region);
/**
* Fill the rect on dst with RGBA color
*
* @param dev from open
* @param dst is destination image
* @param rect is destination rectangle
* @param color is RGBA color to fill
*
* @return 0 if successful
*/
int (*fill_color)(struct copybit_device_t *dev,
struct copybit_image_t const *dst,
struct copybit_rect_t const *rect,
uint32_t color);
/**
* Execute the completion of the copybit draw operation.
*
* @param dev from open
*
* @return 0 if successful
*/
int (*finish)(struct copybit_device_t *dev);
/**
* Trigger the copybit draw operation(async).
*
* @param dev from open
*
* @param fd - gets the fencefd
*
* @return 0 if successful
*/
int (*flush_get_fence)(struct copybit_device_t *dev, int* fd);
/* Clears the buffer
*/
int (*clear)(struct copybit_device_t *dev, struct copybit_image_t const *buf,
struct copybit_rect_t *rect);
};
/** convenience API for opening and closing a device */
static inline int copybit_open(const struct hw_module_t* module,
struct copybit_device_t** device) {
return module->methods->open(module,
COPYBIT_HARDWARE_COPYBIT0, (struct hw_device_t**)device);
}
static inline int copybit_close(struct copybit_device_t* device) {
return device->common.close(&device->common);
}
__END_DECLS
#endif // ANDROID_COPYBIT_INTERFACE_H