| /* Copyright (c) 2011-2012, The Linux Foundation. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials provided |
| * with the distribution. |
| * * Neither the name of The Linux Foundation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS |
| * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR |
| * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, |
| * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE |
| * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN |
| * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #ifndef ANDROID_HARDWARE_QUALCOMM_CAMERA_USBCAM_H |
| #define ANDROID_HARDWARE_QUALCOMM_CAMERA_USBCAM_H |
| |
| extern "C" { |
| #include <sys/time.h> |
| } |
| |
| #include "QCameraHWI.h" |
| |
| extern "C" { |
| |
| /*#include <hardware/camera.h>*/ |
| |
| int usbcam_get_number_of_cameras(); |
| int usbcam_get_camera_info(int camera_id, struct camera_info *info); |
| |
| int usbcam_camera_device_open(const struct hw_module_t* module, const char* id, |
| struct hw_device_t** device); |
| |
| hw_device_t * usbcam_open_camera_device(int cameraId); |
| |
| int usbcam_close_camera_device( hw_device_t *); |
| |
| namespace android { |
| |
| /** Set the ANativeWindow to which preview frames are sent */ |
| int usbcam_set_preview_window(struct camera_device *, |
| struct preview_stream_ops *window); |
| |
| /** Set the notification and data callbacks */ |
| void usbcam_set_CallBacks(struct camera_device *, |
| camera_notify_callback notify_cb, |
| camera_data_callback data_cb, |
| camera_data_timestamp_callback data_cb_timestamp, |
| camera_request_memory get_memory, |
| void *user); |
| |
| /** |
| * The following three functions all take a msg_type, which is a bitmask of |
| * the messages defined in include/ui/Camera.h |
| */ |
| |
| /** |
| * Enable a message, or set of messages. |
| */ |
| void usbcam_enable_msg_type(struct camera_device *, int32_t msg_type); |
| |
| /** |
| * Disable a message, or a set of messages. |
| * |
| * Once received a call to disableMsgType(CAMERA_MSG_VIDEO_FRAME), camera |
| * HAL should not rely on its client to call releaseRecordingFrame() to |
| * release video recording frames sent out by the cameral HAL before and |
| * after the disableMsgType(CAMERA_MSG_VIDEO_FRAME) call. Camera HAL |
| * clients must not modify/access any video recording frame after calling |
| * disableMsgType(CAMERA_MSG_VIDEO_FRAME). |
| */ |
| void usbcam_disable_msg_type(struct camera_device *, int32_t msg_type); |
| |
| /** |
| * Query whether a message, or a set of messages, is enabled. Note that |
| * this is operates as an AND, if any of the messages queried are off, this |
| * will return false. |
| */ |
| int usbcam_msg_type_enabled(struct camera_device *, int32_t msg_type); |
| |
| /** |
| * Start preview mode. |
| */ |
| int usbcam_start_preview(struct camera_device *); |
| |
| /** |
| * Stop a previously started preview. |
| */ |
| void usbcam_stop_preview(struct camera_device *); |
| |
| /** |
| * Returns true if preview is enabled. |
| */ |
| int usbcam_preview_enabled(struct camera_device *); |
| |
| /** |
| * Request the camera HAL to store meta data or real YUV data in the video |
| * buffers sent out via CAMERA_MSG_VIDEO_FRAME for a recording session. If |
| * it is not called, the default camera HAL behavior is to store real YUV |
| * data in the video buffers. |
| * |
| * This method should be called before startRecording() in order to be |
| * effective. |
| * |
| * If meta data is stored in the video buffers, it is up to the receiver of |
| * the video buffers to interpret the contents and to find the actual frame |
| * data with the help of the meta data in the buffer. How this is done is |
| * outside of the scope of this method. |
| * |
| * Some camera HALs may not support storing meta data in the video buffers, |
| * but all camera HALs should support storing real YUV data in the video |
| * buffers. If the camera HAL does not support storing the meta data in the |
| * video buffers when it is requested to do do, INVALID_OPERATION must be |
| * returned. It is very useful for the camera HAL to pass meta data rather |
| * than the actual frame data directly to the video encoder, since the |
| * amount of the uncompressed frame data can be very large if video size is |
| * large. |
| * |
| * @param enable if true to instruct the camera HAL to store |
| * meta data in the video buffers; false to instruct |
| * the camera HAL to store real YUV data in the video |
| * buffers. |
| * |
| * @return OK on success. |
| */ |
| int usbcam_store_meta_data_in_buffers(struct camera_device *, int enable); |
| |
| /** |
| * Start record mode. When a record image is available, a |
| * CAMERA_MSG_VIDEO_FRAME message is sent with the corresponding |
| * frame. Every record frame must be released by a camera HAL client via |
| * releaseRecordingFrame() before the client calls |
| * disableMsgType(CAMERA_MSG_VIDEO_FRAME). After the client calls |
| * disableMsgType(CAMERA_MSG_VIDEO_FRAME), it is the camera HAL's |
| * responsibility to manage the life-cycle of the video recording frames, |
| * and the client must not modify/access any video recording frames. |
| */ |
| int usbcam_start_recording(struct camera_device *); |
| |
| /** |
| * Stop a previously started recording. |
| */ |
| void usbcam_stop_recording(struct camera_device *); |
| |
| /** |
| * Returns true if recording is enabled. |
| */ |
| int usbcam_recording_enabled(struct camera_device *); |
| |
| /** |
| * Release a record frame previously returned by CAMERA_MSG_VIDEO_FRAME. |
| * |
| * It is camera HAL client's responsibility to release video recording |
| * frames sent out by the camera HAL before the camera HAL receives a call |
| * to disableMsgType(CAMERA_MSG_VIDEO_FRAME). After it receives the call to |
| * disableMsgType(CAMERA_MSG_VIDEO_FRAME), it is the camera HAL's |
| * responsibility to manage the life-cycle of the video recording frames. |
| */ |
| void usbcam_release_recording_frame(struct camera_device *, |
| const void *opaque); |
| |
| /** |
| * Start auto focus, the notification callback routine is called with |
| * CAMERA_MSG_FOCUS once when focusing is complete. autoFocus() will be |
| * called again if another auto focus is needed. |
| */ |
| int usbcam_auto_focus(struct camera_device *); |
| |
| /** |
| * Cancels auto-focus function. If the auto-focus is still in progress, |
| * this function will cancel it. Whether the auto-focus is in progress or |
| * not, this function will return the focus position to the default. If |
| * the camera does not support auto-focus, this is a no-op. |
| */ |
| int usbcam_cancel_auto_focus(struct camera_device *); |
| |
| /** |
| * Take a picture. |
| */ |
| int usbcam_take_picture(struct camera_device *); |
| |
| /** |
| * Cancel a picture that was started with takePicture. Calling this method |
| * when no picture is being taken is a no-op. |
| */ |
| int usbcam_cancel_picture(struct camera_device *); |
| |
| /** |
| * Set the camera parameters. This returns BAD_VALUE if any parameter is |
| * invalid or not supported. |
| */ |
| int usbcam_set_parameters(struct camera_device *, const char *parms); |
| |
| //status_t setParameters(const QCameraParameters& params); |
| /** Retrieve the camera parameters. The buffer returned by the camera HAL |
| must be returned back to it with put_parameters, if put_parameters |
| is not NULL. |
| */ |
| char* usbcam_get_parameters(struct camera_device *); |
| |
| /** The camera HAL uses its own memory to pass us the parameters when we |
| call get_parameters. Use this function to return the memory back to |
| the camera HAL, if put_parameters is not NULL. If put_parameters |
| is NULL, then you have to use free() to release the memory. |
| */ |
| void usbcam_put_parameters(struct camera_device *, char *); |
| |
| /** |
| * Send command to camera driver. |
| */ |
| int usbcam_send_command(struct camera_device *, |
| int32_t cmd, int32_t arg1, int32_t arg2); |
| |
| /** |
| * Release the hardware resources owned by this object. Note that this is |
| * *not* done in the destructor. |
| */ |
| void usbcam_release(struct camera_device *); |
| |
| /** |
| * Dump state of the camera hardware |
| */ |
| int usbcam_dump(struct camera_device *, int fd); |
| |
| }; // namespace android |
| |
| } //extern "C" |
| |
| #endif |