| /* |
| * Copyright (C) 2010-2014 NXP Semiconductors |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| /* |
| * NFC Status Values - Function Return Codes |
| */ |
| |
| #ifndef PHNFCSTATUS_H |
| #define PHNFCSTATUS_H |
| |
| #include <phNfcTypes.h> |
| |
| /* Internally required by PHNFCSTVAL. */ |
| #define PHNFCSTSHL8 (8U) |
| /* Required by PHNFCSTVAL. */ |
| #define PHNFCSTBLOWER ((NFCSTATUS)(0x00FFU)) |
| |
| /* |
| * NFC Status Composition Macro |
| * |
| * This is the macro which must be used to compose status values. |
| * |
| * phNfcCompID Component ID, as defined in phNfcCompId.h . |
| * phNfcStatus Status values, as defined in phNfcStatus.h . |
| * |
| * The macro is not required for the NFCSTATUS_SUCCESS value. |
| * This is the only return value to be used directly. |
| * For all other values it shall be used in assignment and conditional |
| * statements, e.g.: |
| * NFCSTATUS status = PHNFCSTVAL(phNfcCompID, phNfcStatus); ... |
| * if (status == PHNFCSTVAL(phNfcCompID, phNfcStatus)) ... |
| */ |
| #define PHNFCSTVAL(phNfcCompID, phNfcStatus) \ |
| (((phNfcStatus) == (NFCSTATUS_SUCCESS)) \ |
| ? (NFCSTATUS_SUCCESS) \ |
| : ((((NFCSTATUS)(phNfcStatus)) & (PHNFCSTBLOWER)) | \ |
| (((uint16_t)(phNfcCompID)) << (PHNFCSTSHL8)))) |
| |
| /* |
| * PHNFCSTATUS |
| * Get grp_retval from Status Code |
| */ |
| #define PHNFCSTATUS(phNfcStatus) ((phNfcStatus)&0x00FFU) |
| #define PHNFCCID(phNfcStatus) (((phNfcStatus)&0xFF00U) >> 8) |
| |
| #define PHNFC_I2C_FRAGMENT_SIZE 512 |
| /* |
| * Status Codes |
| * |
| * Generic Status codes for the NFC components. Combined with the Component ID |
| * they build the value (status) returned by each function. |
| * Example: |
| * grp_comp_id "Component ID" - e.g. 0x10, plus |
| * status code as listed in this file - e.g. 0x03 |
| * result in a status value of 0x0003. |
| */ |
| |
| /* |
| * The function indicates successful completion |
| */ |
| #define NFCSTATUS_SUCCESS (0x0000) |
| |
| /* |
| * The function indicates successful completion |
| */ |
| #define NFCSTATUS_OK (NFCSTATUS_SUCCESS) |
| |
| /* |
| * At least one parameter could not be properly interpreted |
| */ |
| #define NFCSTATUS_INVALID_PARAMETER (0x0001) |
| |
| /* |
| * The buffer provided by the caller is too small |
| */ |
| #define NFCSTATUS_BUFFER_TOO_SMALL (0x0003) |
| |
| /* |
| * Device specifier/handle value is invalid for the operation |
| */ |
| #define NFCSTATUS_INVALID_DEVICE (0x0006) |
| |
| /* |
| * The function executed successfully but could have returned |
| * more information than space provided by the caller |
| */ |
| #define NFCSTATUS_MORE_INFORMATION (0x0008) |
| |
| /* |
| * No response from the remote device received: Time-out |
| */ |
| #define NFCSTATUS_RF_TIMEOUT (0x0009) |
| |
| /* |
| * RF Error during data transaction with the remote device |
| */ |
| #define NFCSTATUS_RF_ERROR (0x000A) |
| |
| /* |
| * Not enough resources Memory, Timer etc(e.g. allocation failed.) |
| */ |
| #define NFCSTATUS_INSUFFICIENT_RESOURCES (0x000C) |
| |
| /* |
| * A non-blocking function returns this immediately to indicate |
| * that an internal operation is in progress |
| */ |
| #define NFCSTATUS_PENDING (0x000D) |
| |
| /* |
| * A board communication error occurred |
| * (e.g. Configuration went wrong) |
| */ |
| #define NFCSTATUS_BOARD_COMMUNICATION_ERROR (0x000F) |
| |
| /* |
| * Invalid State of the particular state machine |
| */ |
| #define NFCSTATUS_INVALID_STATE (0x0011) |
| |
| /* |
| * This Layer is Not initialized, hence initialization required. |
| */ |
| #define NFCSTATUS_NOT_INITIALISED (0x0031) |
| |
| /* |
| * The Layer is already initialized, hence initialization repeated. |
| */ |
| #define NFCSTATUS_ALREADY_INITIALISED (0x0032) |
| |
| /* |
| * Feature not supported |
| */ |
| #define NFCSTATUS_FEATURE_NOT_SUPPORTED (0x0033) |
| |
| /* The Unregistration command has failed because the user wants to unregister |
| * on |
| * an element for which he was not registered |
| */ |
| #define NFCSTATUS_NOT_REGISTERED (0x0034) |
| |
| /* The Registration command has failed because the user wants to register on |
| * an element for which he is already registered |
| */ |
| #define NFCSTATUS_ALREADY_REGISTERED (0x0035) |
| |
| /* Single Tag with Multiple |
| Protocol support detected */ |
| #define NFCSTATUS_MULTIPLE_PROTOCOLS (0x0036) |
| |
| /* |
| * Feature not supported |
| */ |
| #define NFCSTATUS_MULTIPLE_TAGS (0x0037) |
| |
| /* |
| * A DESELECT event has occurred |
| */ |
| #define NFCSTATUS_DESELECTED (0x0038) |
| |
| /* |
| * A RELEASE event has occurred |
| */ |
| #define NFCSTATUS_RELEASED (0x0039) |
| |
| /* |
| * The operation is currently not possible or not allowed |
| */ |
| #define NFCSTATUS_NOT_ALLOWED (0x003A) |
| |
| /* |
| * FW version error while performing FW download, |
| * FW major version mismatch (cannot downgrade FW major version) or FW version |
| * already upto date |
| * User may be trying to flash Mobile FW on top of Infra FW, which is not |
| * allowed |
| * Download appropriate version of FW |
| */ |
| #define NFCSTATUS_FW_VERSION_ERROR (0x003C) |
| |
| /* |
| * The system is busy with the previous operation. |
| */ |
| #define NFCSTATUS_BUSY (0x006F) |
| |
| /* NDEF Mapping error codes */ |
| |
| /* The remote device (type) is not valid for this request. */ |
| #define NFCSTATUS_INVALID_REMOTE_DEVICE (0x001D) |
| |
| /* Read operation failed */ |
| #define NFCSTATUS_READ_FAILED (0x0014) |
| |
| /* |
| * Write operation failed |
| */ |
| #define NFCSTATUS_WRITE_FAILED (0x0015) |
| |
| /* Non Ndef Compliant */ |
| #define NFCSTATUS_NO_NDEF_SUPPORT (0x0016) |
| |
| /* Could not proceed further with the write operation: reached card EOF*/ |
| #define NFCSTATUS_EOF_NDEF_CONTAINER_REACHED (0x001A) |
| |
| /* Incorrect number of bytes received from the card*/ |
| #define NFCSTATUS_INVALID_RECEIVE_LENGTH (0x001B) |
| |
| /* The data format/composition is not understood/correct. */ |
| #define NFCSTATUS_INVALID_FORMAT (0x001C) |
| |
| /* There is not sufficient storage available. */ |
| #define NFCSTATUS_INSUFFICIENT_STORAGE (0x001F) |
| |
| /* The Ndef Format procedure has failed. */ |
| #define NFCSTATUS_FORMAT_ERROR (0x0023) |
| |
| /* The NCI Cedit error */ |
| #define NFCSTATUS_CREDIT_TIMEOUT (0x0024) |
| |
| /* |
| * Response Time out for the control message(NFCC not responded) |
| */ |
| #define NFCSTATUS_RESPONSE_TIMEOUT (0x0025) |
| |
| /* |
| * Device is already connected |
| */ |
| #define NFCSTATUS_ALREADY_CONNECTED (0x0026) |
| |
| /* |
| * Device is already connected |
| */ |
| #define NFCSTATUS_ANOTHER_DEVICE_CONNECTED (0x0027) |
| |
| /* |
| * Single Target Detected and Activated |
| */ |
| #define NFCSTATUS_SINGLE_TAG_ACTIVATED (0x0028) |
| |
| /* |
| * Single Target Detected |
| */ |
| #define NFCSTATUS_SINGLE_TAG_DISCOVERED (0x0029) |
| |
| /* |
| * Secure element Detected and Activated |
| */ |
| #define NFCSTATUS_SECURE_ELEMENT_ACTIVATED (0x0028) |
| |
| /* |
| * Unknown error Status Codes |
| */ |
| #define NFCSTATUS_UNKNOWN_ERROR (0x00FE) |
| |
| /* |
| * Status code for failure |
| */ |
| #define NFCSTATUS_FAILED (0x00FF) |
| |
| /* |
| * The function/command has been aborted |
| */ |
| #define NFCSTATUS_CMD_ABORTED (0x0002) |
| |
| /* |
| * No target found after poll |
| */ |
| #define NFCSTATUS_NO_TARGET_FOUND (0x000A) |
| |
| /* Attempt to disconnect a not connected remote device. */ |
| #define NFCSTATUS_NO_DEVICE_CONNECTED (0x000B) |
| |
| /* External RF field detected. */ |
| #define NFCSTATUS_EXTERNAL_RF_DETECTED (0x000E) |
| |
| /* Message is not allowed by the state machine |
| * (e.g. configuration went wrong) |
| */ |
| #define NFCSTATUS_MSG_NOT_ALLOWED_BY_FSM (0x0010) |
| |
| /* |
| * No access has been granted |
| */ |
| #define NFCSTATUS_ACCESS_DENIED (0x001E) |
| |
| /* No registry node matches the specified input data. */ |
| #define NFCSTATUS_NODE_NOT_FOUND (0x0017) |
| |
| /* The current module is busy ; one might retry later */ |
| #define NFCSTATUS_SMX_BAD_STATE (0x00F0) |
| |
| /* The Abort mechanism has failed for unexpected reason: user can try again*/ |
| #define NFCSTATUS_ABORT_FAILED (0x00F2) |
| |
| /* The Registration command has failed because the user wants to register as |
| * target |
| * on a operating mode not supported |
| */ |
| #define NFCSTATUS_REG_OPMODE_NOT_SUPPORTED (0x00F5) |
| |
| /* |
| * Shutdown in progress, cannot handle the request at this time. |
| */ |
| #define NFCSTATUS_SHUTDOWN (0x0091) |
| |
| /* |
| * Target is no more in RF field |
| */ |
| #define NFCSTATUS_TARGET_LOST (0x0092) |
| |
| /* |
| * Request is rejected |
| */ |
| #define NFCSTATUS_REJECTED (0x0093) |
| |
| /* |
| * Target is not connected |
| */ |
| #define NFCSTATUS_TARGET_NOT_CONNECTED (0x0094) |
| |
| /* |
| * Invalid handle for the operation |
| */ |
| #define NFCSTATUS_INVALID_HANDLE (0x0095) |
| |
| /* |
| * Process aborted |
| */ |
| #define NFCSTATUS_ABORTED (0x0096) |
| |
| /* |
| * Requested command is not supported |
| */ |
| #define NFCSTATUS_COMMAND_NOT_SUPPORTED (0x0097) |
| |
| /* |
| * Tag is not NDEF compilant |
| */ |
| #define NFCSTATUS_NON_NDEF_COMPLIANT (0x0098) |
| |
| /* |
| * Not enough memory available to complete the requested operation |
| */ |
| #define NFCSTATUS_NOT_ENOUGH_MEMORY (0x001F) |
| |
| /* |
| * Indicates incoming connection |
| */ |
| #define NFCSTATUS_INCOMING_CONNECTION (0x0045) |
| |
| /* |
| * Indicates Connection was successful |
| */ |
| #define NFCSTATUS_CONNECTION_SUCCESS (0x0046) |
| |
| /* |
| * Indicates Connection failed |
| */ |
| #define NFCSTATUS_CONNECTION_FAILED (0x0047) |
| |
| #endif /* PHNFCSTATUS_H */ |