| ########################## Start of libnfc-nci.conf ########################### |
| ############################################################################### |
| # Application options |
| NFC_DEBUG_ENABLED=1 |
| ############################################################################### |
| # performance measurement |
| # Change this setting to control how often USERIAL log the performance (throughput) |
| # data on read/write/poll |
| # defailt is to log performance dara for every 100 read or write |
| #REPORT_PERFORMANCE_MEASURE=100 |
| ############################################################################### |
| # File used for NFA storage |
| NFA_STORAGE="/data/nfc" |
| ############################################################################### |
| # When screen is turned off, specify the desired power state of the controller. |
| # 0: power-off-sleep state; DEFAULT |
| # 1: full-power state |
| # 2: screen-off card-emulation (CE4/CE3/CE1 modes are used) |
| SCREEN_OFF_POWER_STATE=1 |
| ############################################################################### |
| # Force tag polling for the following technology(s). |
| # The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h. |
| # Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B | |
| # NFA_TECHNOLOGY_MASK_F | NFA_TECHNOLOGY_MASK_ISO15693 | |
| # NFA_TECHNOLOGY_MASK_B_PRIME | NFA_TECHNOLOGY_MASK_KOVIO | |
| # NFA_TECHNOLOGY_MASK_ACTIVE |
| # |
| # Notable bits: |
| # NFA_TECHNOLOGY_MASK_A 0x01 /* NFC Technology A */ |
| # NFA_TECHNOLOGY_MASK_B 0x02 /* NFC Technology B */ |
| # NFA_TECHNOLOGY_MASK_F 0x04 /* NFC Technology F */ |
| # NFA_TECHNOLOGY_MASK_ISO15693 0x08 /* Proprietary Technology */ |
| # NFA_TECHNOLOGY_MASK_KOVIO 0x20 /* Proprietary Technology */ |
| # NFA_TECHNOLOGY_MASK_ACTIVE 0x40 /* NFC Technology Active */ |
| POLLING_TECH_MASK=0x6F |
| ############################################################################### |
| # Force P2P to only listen for the following technology(s). |
| # The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h. |
| # Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_F | |
| # NFA_TECHNOLOGY_MASK_ACTIVE |
| # |
| # Notable bits: |
| # NFA_TECHNOLOGY_MASK_A 0x01 /* NFC Technology A */ |
| # NFA_TECHNOLOGY_MASK_F 0x04 /* NFC Technology F */ |
| # NFA_TECHNOLOGY_MASK_ACTIVE 0x40 /* NFC Technology Active */ |
| P2P_LISTEN_TECH_MASK=0x45 |
| PRESERVE_STORAGE=0x01 |
| ############################################################################### |
| # Override the stack default for NFA_EE_MAX_EE_SUPPORTED set in nfc_target.h. |
| # The value is set assumeing discovery of 0x00(Host), 0xC0(Ese) and 0x80(UICC). |
| # If a platform will exclude and SE, this value can be reduced so that the stack |
| # will not wait any longer than necessary. |
| # Maximum EE supported number |
| NFA_MAX_EE_SUPPORTED=0x02 |
| ############################################################################### |
| # AID_MATCHING constants |
| # AID_MATCHING_EXACT_ONLY 0x00 |
| # AID_MATCHING_EXACT_OR_PREFIX 0x01 |
| # AID_MATCHING_PREFIX_ONLY 0x02 |
| # AID_MATCHING_EXACT_OR_SUBSET_OR_PREFIX 0x03 |
| AID_MATCHING_MODE=0x03 |
| ############################################################################### |
| # Enable/Disable Block Route feature. |
| # Block Route will restrict routing to first matched rule |
| # Block Route enable 0x01 |
| # Block Route disable 0x00 |
| NFA_BLOCK_ROUTE=0x00 |
| ############################################################################### |
| #Set the default Felica T3T System Code : |
| #This settings will be used when application does not set this parameter |
| DEFAULT_SYS_CODE={FE:FF} |
| ############################################################################### |
