| /* | |
| * Copyright (C) 2008 The Android Open Source Project | |
| * | |
| * Licensed under the Apache License, Version 2.0 (the "License"); | |
| * you may not use this file except in compliance with the License. | |
| * You may obtain a copy of the License at | |
| * | |
| * http://www.apache.org/licenses/LICENSE-2.0 | |
| * | |
| * Unless required by applicable law or agreed to in writing, software | |
| * distributed under the License is distributed on an "AS IS" BASIS, | |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| * See the License for the specific language governing permissions and | |
| * limitations under the License. | |
| */ | |
| #include <hardware/hardware.h> | |
| #include <cutils/properties.h> | |
| #include <dlfcn.h> | |
| #include <string.h> | |
| #include <pthread.h> | |
| #include <errno.h> | |
| #include <limits.h> | |
| #include <stdio.h> | |
| #include <stdlib.h> | |
| #include <unistd.h> | |
| #define LOG_TAG "HAL" | |
| #include <log/log.h> | |
| #if !defined(__ANDROID_RECOVERY__) | |
| #include <vndksupport/linker.h> | |
| #endif | |
| /** Base path of the hal modules */ | |
| #if defined(__LP64__) | |
| #define HAL_LIBRARY_PATH1 "/system/lib64/hw" | |
| #define HAL_LIBRARY_PATH2 "/vendor/lib64/hw" | |
| #define HAL_LIBRARY_PATH3 "/odm/lib64/hw" | |
| #else | |
| #define HAL_LIBRARY_PATH1 "/system/lib/hw" | |
| #define HAL_LIBRARY_PATH2 "/vendor/lib/hw" | |
| #define HAL_LIBRARY_PATH3 "/odm/lib/hw" | |
| #endif | |
| /** | |
| * There are a set of variant filename for modules. The form of the filename | |
| * is "<MODULE_ID>.variant.so" so for the led module the Dream variants | |
| * of base "ro.product.board", "ro.board.platform" and "ro.arch" would be: | |
| * | |
| * led.trout.so | |
| * led.msm7k.so | |
| * led.ARMV6.so | |
| * led.default.so | |
| */ | |
| static const char *variant_keys[] = { | |
| "ro.hardware", /* This goes first so that it can pick up a different | |
| file on the emulator. */ | |
| "ro.product.board", | |
| "ro.board.platform", | |
| "ro.arch" | |
| }; | |
| static const int HAL_VARIANT_KEYS_COUNT = | |
| (sizeof(variant_keys)/sizeof(variant_keys[0])); | |
| /** | |
| * Load the file defined by the variant and if successful | |
| * return the dlopen handle and the hmi. | |
| * @return 0 = success, !0 = failure. | |
| */ | |
| static int load(const char *id, | |
| const char *path, | |
| const struct hw_module_t **pHmi) | |
| { | |
| int status = -EINVAL; | |
| void *handle = NULL; | |
| struct hw_module_t *hmi = NULL; | |
| #ifdef __ANDROID_VNDK__ | |
| const bool try_system = false; | |
| #else | |
| const bool try_system = true; | |
| #endif | |
| /* | |
| * load the symbols resolving undefined symbols before | |
| * dlopen returns. Since RTLD_GLOBAL is not or'd in with | |
| * RTLD_NOW the external symbols will not be global | |
| */ | |
| if (try_system && | |
| strncmp(path, HAL_LIBRARY_PATH1, strlen(HAL_LIBRARY_PATH1)) == 0) { | |
| /* If the library is in system partition, no need to check | |
| * sphal namespace. Open it with dlopen. | |
| */ | |
| handle = dlopen(path, RTLD_NOW); | |
| } else { | |
| #if defined(__ANDROID_RECOVERY__) | |
| handle = dlopen(path, RTLD_NOW); | |
| #else | |
| handle = android_load_sphal_library(path, RTLD_NOW); | |
| #endif | |
| } | |
| if (handle == NULL) { | |
| char const *err_str = dlerror(); | |
| ALOGE("load: module=%s\n%s", path, err_str?err_str:"unknown"); | |
| status = -EINVAL; | |
| goto done; | |
| } | |
| /* Get the address of the struct hal_module_info. */ | |
| const char *sym = HAL_MODULE_INFO_SYM_AS_STR; | |
| hmi = (struct hw_module_t *)dlsym(handle, sym); | |
| if (hmi == NULL) { | |
| ALOGE("load: couldn't find symbol %s", sym); | |
| status = -EINVAL; | |
| goto done; | |
| } | |
| /* Check that the id matches */ | |
| if (strcmp(id, hmi->id) != 0) { | |
| ALOGE("load: id=%s != hmi->id=%s", id, hmi->id); | |
| status = -EINVAL; | |
| goto done; | |
| } | |
| hmi->dso = handle; | |
| /* success */ | |
| status = 0; | |
| done: | |
| if (status != 0) { | |
| hmi = NULL; | |
| if (handle != NULL) { | |
| dlclose(handle); | |
| handle = NULL; | |
| } | |
| } else { | |
| ALOGV("loaded HAL id=%s path=%s hmi=%p handle=%p", | |
| id, path, hmi, handle); | |
| } | |
| *pHmi = hmi; | |
| return status; | |
| } | |
| /* | |
| * If path is in in_path. | |
| */ | |
| static bool path_in_path(const char *path, const char *in_path) { | |
| char real_path[PATH_MAX]; | |
| if (realpath(path, real_path) == NULL) return false; | |
| char real_in_path[PATH_MAX]; | |
| if (realpath(in_path, real_in_path) == NULL) return false; | |
| const size_t real_in_path_len = strlen(real_in_path); | |
| if (strncmp(real_path, real_in_path, real_in_path_len) != 0) { | |
| return false; | |
| } | |
| return strlen(real_path) > real_in_path_len && | |
| real_path[real_in_path_len] == '/'; | |
| } | |
| /* | |
| * Check if a HAL with given name and subname exists, if so return 0, otherwise | |
| * otherwise return negative. On success path will contain the path to the HAL. | |
| */ | |
| static int hw_module_exists(char *path, size_t path_len, const char *name, | |
| const char *subname) | |
| { | |
| snprintf(path, path_len, "%s/%s.%s.so", | |
| HAL_LIBRARY_PATH3, name, subname); | |
| if (path_in_path(path, HAL_LIBRARY_PATH3) && access(path, R_OK) == 0) | |
| return 0; | |
| snprintf(path, path_len, "%s/%s.%s.so", | |
| HAL_LIBRARY_PATH2, name, subname); | |
| if (path_in_path(path, HAL_LIBRARY_PATH2) && access(path, R_OK) == 0) | |
| return 0; | |
| #ifndef __ANDROID_VNDK__ | |
| snprintf(path, path_len, "%s/%s.%s.so", | |
| HAL_LIBRARY_PATH1, name, subname); | |
| if (path_in_path(path, HAL_LIBRARY_PATH1) && access(path, R_OK) == 0) | |
| return 0; | |
| #endif | |
| return -ENOENT; | |
| } | |
| int hw_get_module_by_class(const char *class_id, const char *inst, | |
| const struct hw_module_t **module) | |
| { | |
| int i = 0; | |
| char prop[PATH_MAX] = {0}; | |
| char path[PATH_MAX] = {0}; | |
| char name[PATH_MAX] = {0}; | |
| char prop_name[PATH_MAX] = {0}; | |
| if (inst) | |
| snprintf(name, PATH_MAX, "%s.%s", class_id, inst); | |
| else | |
| strlcpy(name, class_id, PATH_MAX); | |
| /* | |
| * Here we rely on the fact that calling dlopen multiple times on | |
| * the same .so will simply increment a refcount (and not load | |
| * a new copy of the library). | |
| * We also assume that dlopen() is thread-safe. | |
| */ | |
| /* First try a property specific to the class and possibly instance */ | |
| snprintf(prop_name, sizeof(prop_name), "ro.hardware.%s", name); | |
| if (property_get(prop_name, prop, NULL) > 0) { | |
| if (hw_module_exists(path, sizeof(path), name, prop) == 0) { | |
| goto found; | |
| } | |
| } | |
| /* Loop through the configuration variants looking for a module */ | |
| for (i=0 ; i<HAL_VARIANT_KEYS_COUNT; i++) { | |
| if (property_get(variant_keys[i], prop, NULL) == 0) { | |
| continue; | |
| } | |
| if (hw_module_exists(path, sizeof(path), name, prop) == 0) { | |
| goto found; | |
| } | |
| } | |
| /* Nothing found, try the default */ | |
| if (hw_module_exists(path, sizeof(path), name, "default") == 0) { | |
| goto found; | |
| } | |
| return -ENOENT; | |
| found: | |
| /* load the module, if this fails, we're doomed, and we should not try | |
| * to load a different variant. */ | |
| return load(class_id, path, module); | |
| } | |
| int hw_get_module(const char *id, const struct hw_module_t **module) | |
| { | |
| return hw_get_module_by_class(id, NULL, module); | |
| } |