blob: 9c39bc4420c8e5e2b6db7082666e8417ddaac283 [file] [log] [blame]
/*
* Copyright (C) 2021 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package android.hardware.radio;
/** @hide */
@VintfStability
@Backing(type="int")
@JavaDerive(toString=true)
enum RadioError {
/**
* Success
*/
NONE = 0,
/**
* If radio did not start or is resetting
*/
RADIO_NOT_AVAILABLE = 1,
GENERIC_FAILURE = 2,
/**
* For PIN/PIN2 methods only
*/
PASSWORD_INCORRECT = 3,
/**
* Operation requires SIM PIN2 to be entered
*/
SIM_PIN2 = 4,
/**
* Operation requires SIM PUK2 to be entered
*/
SIM_PUK2 = 5,
/**
* Optional API
*/
REQUEST_NOT_SUPPORTED = 6,
CANCELLED = 7,
/**
* Data ops are not allowed during voice call on a Class C GPRS device
*/
OP_NOT_ALLOWED_DURING_VOICE_CALL = 8,
/**
* Data ops are not allowed before device registers in network
*/
OP_NOT_ALLOWED_BEFORE_REG_TO_NW = 9,
/**
* Fail to send SMS and need to retry
*/
SMS_SEND_FAIL_RETRY = 10,
/**
* Fail to set the location where CDMA subscription shall be retrieved because of SIM or
* RUIM card absent
*/
SIM_ABSENT = 11,
/**
* Fail to find CDMA subscription from specified location
*/
SUBSCRIPTION_NOT_AVAILABLE = 12,
/**
* HW does not support preferred network type
*/
MODE_NOT_SUPPORTED = 13,
/**
* Command failed becausee recipient is not on FDN list
*/
FDN_CHECK_FAILURE = 14,
/**
* Network selection failed due to illegal SIM or ME
*/
ILLEGAL_SIM_OR_ME = 15,
/**
* No logical channel available
*/
MISSING_RESOURCE = 16,
/**
* Application not found on SIM
*/
NO_SUCH_ELEMENT = 17,
/**
* DIAL request modified to USSD
*/
DIAL_MODIFIED_TO_USSD = 18,
/**
* DIAL request modified to SS
*/
DIAL_MODIFIED_TO_SS = 19,
/**
* DIAL request modified to DIAL with different data
*/
DIAL_MODIFIED_TO_DIAL = 20,
/**
* USSD request modified to DIAL
*/
USSD_MODIFIED_TO_DIAL = 21,
/**
* USSD request modified to SS
*/
USSD_MODIFIED_TO_SS = 22,
/**
* USSD request modified to different USSD request
*/
USSD_MODIFIED_TO_USSD = 23,
/**
* SS request modified to DIAL
*/
SS_MODIFIED_TO_DIAL = 24,
/**
* SS request modified to USSD
*/
SS_MODIFIED_TO_USSD = 25,
/**
* Subscription not supported by RIL
*/
SUBSCRIPTION_NOT_SUPPORTED = 26,
/**
* SS request modified to different SS request
*/
SS_MODIFIED_TO_SS = 27,
/**
* LCE service not supported(36 in RILConstants.java)
*/
LCE_NOT_SUPPORTED = 36,
/**
* Not sufficieent memory to process the request
*/
NO_MEMORY = 37,
/**
* Modem hit unexpected error scenario while handling this request
*/
INTERNAL_ERR = 38,
/**
* Hit platform or system error
*/
SYSTEM_ERR = 39,
/**
* Vendor RIL got unexpected or incorrect response from modem for this request
*/
MODEM_ERR = 40,
/**
* Unexpected request for the current state
*/
INVALID_STATE = 41,
/**
* Not sufficient resource to process the request
*/
NO_RESOURCES = 42,
/**
* Received error from SIM card
*/
SIM_ERR = 43,
/**
* Received invalid arguments in request
*/
INVALID_ARGUMENTS = 44,
/**
* Cannot process the request in current SIM state
*/
INVALID_SIM_STATE = 45,
/**
* Cannot process the request in current modem state
*/
INVALID_MODEM_STATE = 46,
/**
* Received invalid call ID in request
*/
INVALID_CALL_ID = 47,
/**
* ACK received when there is no SMS to ack
*/
NO_SMS_TO_ACK = 48,
/**
* Received error from network. This generic error code should be used only when the error
* cannot be mapped to other specific network error codes.
*/
NETWORK_ERR = 49,
/**
* Operation denied due to overly-frequent requests
*/
REQUEST_RATE_LIMITED = 50,
/**
* SIM is busy
*/
SIM_BUSY = 51,
/**
* The target EF is full
*/
SIM_FULL = 52,
/**
* Request is rejected by network
*/
NETWORK_REJECT = 53,
/**
* Not allowed the request not
*/
OPERATION_NOT_ALLOWED = 54,
/**
* The request record is empty
*/
EMPTY_RECORD = 55,
/**
* Invalid SMS format
*/
INVALID_SMS_FORMAT = 56,
/**
* Message not encoded properly
*/
ENCODING_ERR = 57,
/**
* SMSC addrss specified is invalid
*/
INVALID_SMSC_ADDRESS = 58,
/**
* No such entry present to perform the request
*/
NO_SUCH_ENTRY = 59,
/**
* Network is not ready to perform the request
*/
NETWORK_NOT_READY = 60,
/**
* Device does not have this value provisioned
*/
NOT_PROVISIONED = 61,
/**
* Device does not have subscription
*/
NO_SUBSCRIPTION = 62,
/**
* Network cannot be found
*/
NO_NETWORK_FOUND = 63,
/**
* Operation cannot be performed because the device is currently in use
*/
DEVICE_IN_USE = 64,
/**
* Operation aborted
*/
ABORTED = 65,
/**
* Response from vendor had invalid data
*/
INVALID_RESPONSE = 66,
OEM_ERROR_1 = 501,
OEM_ERROR_2 = 502,
OEM_ERROR_3 = 503,
OEM_ERROR_4 = 504,
OEM_ERROR_5 = 505,
OEM_ERROR_6 = 506,
OEM_ERROR_7 = 507,
OEM_ERROR_8 = 508,
OEM_ERROR_9 = 509,
OEM_ERROR_10 = 510,
OEM_ERROR_11 = 511,
OEM_ERROR_12 = 512,
OEM_ERROR_13 = 513,
OEM_ERROR_14 = 514,
OEM_ERROR_15 = 515,
OEM_ERROR_16 = 516,
OEM_ERROR_17 = 517,
OEM_ERROR_18 = 518,
OEM_ERROR_19 = 519,
OEM_ERROR_20 = 520,
OEM_ERROR_21 = 521,
OEM_ERROR_22 = 522,
OEM_ERROR_23 = 523,
OEM_ERROR_24 = 524,
OEM_ERROR_25 = 525,
/**
* 1X voice and SMS are not allowed simulteneously.
*/
SIMULTANEOUS_SMS_AND_CALL_NOT_ALLOWED = 67,
/**
* Access is barred.
*/
ACCESS_BARRED = 68,
/**
* SMS is blocked due to call control, e.g., resource unavailable
* in the SMR entity.
*/
BLOCKED_DUE_TO_CALL = 69,
/**
* Returned from setRadioPowerResponse when detecting RF HW issues. Some RF Front-End (RFFE)
* components like antenna are considered critical for modem to provide telephony service.
* This RadioError is used when modem detect such RFFE problem.
*/
RF_HARDWARE_ISSUE = 70,
/**
* Returned from setRadioPowerResponse when detecting no RF calibration issue.
* Unlike RF_HARDWARE_ISSUE, this is a SW problem and no HW repair is needed.
*/
NO_RF_CALIBRATION_INFO = 71,
}