radio/1.5/IRadio.hal - platform/hardware/interfaces - Git at Google

 /*
  * Copyright (C) 2019 The Android Open Source Project
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */

 package android.hardware.radio@1.5;

 import @1.0::CdmaSmsMessage;
 import @1.2::DataRequestReason;
 import @1.4::IRadio;
 import @1.5::AccessNetwork;
 import @1.5::DataProfileInfo;
 import @1.5::IndicationFilter;
 import @1.5::LinkAddress;
 import @1.5::NetworkScanRequest;
 import @1.5::PersoSubstate;
 import @1.5::RadioAccessNetworks;
 import @1.5::RadioAccessSpecifier;
 import @1.5::SignalThresholdInfo;

 /**
  * This interface is used by telephony and telecom to talk to cellular radio.
  * All the functions have minimum one parameter:
  * serial: which corresponds to serial no. of request. Serial numbers must only be memorized for the
  * duration of a method call. If clients provide colliding serials (including passing the same
  * serial to different methods), multiple responses (one for each method call) must still be served.
  * setResponseFunctions must work with @1.5::IRadioResponse and @1.5::IRadioIndication.
  */
 interface IRadio extends @1.4::IRadio {
     /**
      * Sets the signal strength reporting criteria.
      *
      * The resulting reporting rules are the AND of all the supplied criteria. For each RAN
      * The hysteresisDb and thresholds apply to only the following measured quantities:
      * -GERAN    - RSSI
      * -CDMA2000 - RSSI
      * -UTRAN    - RSCP
      * -EUTRAN   - RSRP/RSRQ/RSSNR
      * -NGRAN    - SSRSRP/SSRSRQ/SSSINR
      *
      * Note: Reporting criteria must be individually set for each RAN. For each RAN, if none of
      * reporting criteria of any measurement is set enabled
      * (see @1.5::SignalThresholdInfo.isEnabled), the reporting criteria for this RAN is
      * implementation-defined. For each RAN, if any of reporting criteria of any measure is set
      * enabled, the reporting criteria of the other measures in this RAN are set disabled
      * (see @1.5::SignalThresholdInfo.isEnabled) until they are set enabled.
      *
      * Response callback is
      * IRadioResponse.setSignalStrengthReportingCriteriaResponse_1_5()
      *
      * @param serial Serial number of request.
      * @param signalThresholdInfo Signal threshold info including the threshold values,
      *                            hysteresisDb, hysteresisMs and isEnabled.
      *                            See @1.5::SignalThresholdInfo for details.
      * @param accessNetwork The type of network for which to apply these thresholds.
      */
     oneway setSignalStrengthReportingCriteria_1_5(int32_t serial,
             SignalThresholdInfo signalThresholdInfo, AccessNetwork accessNetwork);

     /**
      * Sets the link capacity reporting criteria.
      *
      * The resulting reporting criteria are the AND of all the supplied criteria.
      *
      * Note: Reporting criteria must be individually set for each RAN. If unset, reporting criteria
      * for that RAN are implementation-defined.
      *
      * Response callback is IRadioResponse.setLinkCapacityReportingCriteriaResponse_1_5().
      *
      * @param serial Serial number of request.
      * @param hysteresisMs A hysteresis time in milliseconds to prevent flapping. A value of 0
      *     disables hysteresis.
      * @param hysteresisDlKbps An interval in kbps defining the required magnitude change between DL
      *     reports. hysteresisDlKbps must be smaller than the smallest threshold delta. A value of 0
      *     disables hysteresis.
      * @param hysteresisUlKbps An interval in kbps defining the required magnitude change between UL
      *     reports. hysteresisUlKbps must be smaller than the smallest threshold delta. A value of 0
      *     disables hysteresis.
      * @param thresholdsDownlinkKbps A vector of trigger thresholds in kbps for downlink reports. A
      *     vector size of 0 disables the use of DL thresholds for reporting.
      * @param thresholdsUplinkKbps A vector of trigger thresholds in kbps for uplink reports. A
      *     vector size of 0 disables the use of UL thresholds for reporting.
      * @param accessNetwork The type of network for which to apply these thresholds.
      */
     oneway setLinkCapacityReportingCriteria_1_5(int32_t serial, int32_t hysteresisMs,
             int32_t hysteresisDlKbps, int32_t hysteresisUlKbps, vec<int32_t> thresholdsDownlinkKbps,
             vec<int32_t> thresholdsUplinkKbps, AccessNetwork accessNetwork);

     /**
      * Enable or disable UiccApplications on the SIM. If disabled:
      *  - Modem will not register on any network.
      *  - SIM must be PRESENT, and the IccId of the SIM must still be accessible.
      *  - The corresponding modem stack is still functional, e.g. able to make emergency calls or
      *    do network scan.
      * By default if this API is not called, the uiccApplications must be enabled automatically.
      * It must work for both single SIM and DSDS cases for UX consistency.
      * The preference is per SIM, and must be remembered over power cycle, modem reboot, or SIM
      * insertion / unplug.
      *
      * @param serial Serial number of request.
      * @param enable true if to enable uiccApplications, false to disable.

      * Response callback is IRadioResponse.enableUiccApplicationsResponse()
      */
     oneway enableUiccApplications(int32_t serial, bool enable);

     /**
      * Whether uiccApplications are enabled, or disabled.
      *
      * By default uiccApplications must be enabled, unless enableUiccApplications() with enable
      * being false is called.
      *
      * @param serial Serial number of request.
      *
      * Response callback is IRadioResponse.areUiccApplicationsEnabledResponse()
      */
     oneway areUiccApplicationsEnabled(int32_t serial);

     /**
      * Specify which bands modem's background scan must act on.
      * If specifyChannels is true, it only scans bands specified in specifiers.
      * If specifyChannels is false, it scans all bands.
      *
      * For example, CBRS is only on LTE band 48. By specifying this band,
      * modem saves more power.
      *
      * @param serial Serial number of request.
      * @param specifyChannels whether to scan bands defined in specifiers.
      * @param specifiers which bands to scan. Only used if specifyChannels is true.
      *
      * Response callback is IRadioResponse.setSystemSelectionChannelsResponse()
      */
     oneway setSystemSelectionChannels_1_5(int32_t serial, bool specifyChannels,
             vec<RadioAccessSpecifier> specifiers);

     /**
      * Starts a network scan.
      *
      * @param serial Serial number of request.
      * @param request Defines the radio networks/bands/channels which need to be scanned.
      *
      * Same API as @1.4::IRadio.startNetworkScan_1_4, except using the
      * 1.5 NetworkScanRequest as the input param.
      */
     oneway startNetworkScan_1_5(int32_t serial, NetworkScanRequest request);

     /**
      * Setup a packet data connection. If DataCallResponse.status returns DataCallFailCause:NONE,
      * the data connection must be added to data calls and a unsolDataCallListChanged() must be
      * sent. The call remains until removed by subsequent unsolDataCallIstChanged(). It may be
      * lost due to many factors, including deactivateDataCall() being issued, the radio powered
      * off, reception lost or even transient factors like congestion. This data call list is
      * returned by getDataCallList() and dataCallListChanged().
      *
      * The Radio is expected to:
      *   - Create one data call context.
      *   - Create and configure a dedicated interface for the context.
      *   - The interface must be point to point.
      *   - The interface is configured with one or more addresses and is capable of sending and
      *     receiving packets. The prefix length of the addresses must be /32 for IPv4 and /128
      *     for IPv6.
      *   - Must not modify routing configuration related to this interface; routing management is
      *     exclusively within the purview of the Android OS.
      *   - Support simultaneous data call contexts up to DataRegStateResult.maxDataCalls specified
      *     in the response of getDataRegistrationState.
      *
      * @param serial Serial number of request.
      * @param accessNetwork The access network to setup the data call. If the data connection cannot
      *     be established on the specified access network, the setup request must be failed.
      * @param dataProfileInfo Data profile info.
      * @param roamingAllowed Indicates whether or not data roaming is allowed by the user.
      * @param reason The request reason. Must be DataRequestReason.NORMAL or
      *     DataRequestReason.HANDOVER.
      * @param addresses If the reason is DataRequestReason.HANDOVER, this indicates the list of link
      *     addresses of the existing data connection. This parameter must be ignored unless reason
      *     is DataRequestReason.HANDOVER.
      * @param dnses If the reason is DataRequestReason.HANDOVER, this indicates the list of DNS
      *     addresses of the existing data connection. The format is defined in RFC-4291 section
      *     2.2. For example, "192.0.1.3" or "2001:db8::1". This parameter must be ignored unless
      *     reason is DataRequestReason.HANDOVER.
      *
      * Response function is IRadioResponse.setupDataCallResponse_1_5()
      *
      * Note this API is the same as the 1.4 version except using the
      * 1.5 AccessNetwork, DataProfileInto, and LinkAddress as the input param.
      */
     oneway setupDataCall_1_5(int32_t serial, AccessNetwork accessNetwork,
             DataProfileInfo dataProfileInfo, bool roamingAllowed,
             DataRequestReason reason, vec<LinkAddress> addresses, vec<string> dnses);

     /**
      * Set an APN to initial attach network.
      *
      * @param serial Serial number of request.
      * @param dataProfileInfo data profile containing APN settings
      *
      * Response callback is IRadioResponse.setInitialAttachApnResponse_1_5()
      *
      * Note this API is the same as the 1.4 version except using the 1.5 DataProfileInfo
      * as the input param.
      */
     oneway setInitialAttachApn_1_5(int32_t serial, DataProfileInfo dataProfileInfo);

     /**
      * Send data profiles of the current carrier to the modem.
      *
      * @param serial Serial number of request.
      * @param profiles Array of DataProfileInfo to set.
      *
      * Response callback is IRadioResponse.setDataProfileResponse_1_5()
      *
      * Note this API is the same as the 1.4 version except using the 1.5 DataProfileInfo
      * as the input param.
      */
     oneway setDataProfile_1_5(int32_t serial, vec<DataProfileInfo> profiles);

     /**
      * Toggle radio on and off (for "airplane" mode)
      * If the radio is turned off/on the radio modem subsystem
      * is expected return to an initialized state. For instance,
      * any voice and data calls must be terminated and all associated
      * lists emptied.
      *
      * When setting radio power on to exit from airplane mode to place an emergency call on this
      * logical modem, powerOn, forEmergencyCall and preferredForEmergencyCall must be true. In
      * this case, this modem is optimized to scan only emergency call bands, until:
      * 1) Emergency call is completed; or
      * 2) Another setRadioPower_1_5 is issued with forEmergencyCall being false or
      * preferredForEmergencyCall being false; or
      * 3) Timeout after 30 seconds if dial or emergencyDial is not called.
      * Once one of these conditions is reached, the modem should move into normal operation.
      *
      * @param serial Serial number of request.
      * @param powerOn To turn on radio -> on = true, to turn off radio -> on = false.
      * @param forEmergencyCall To indication to radio if this request is due to emergency call.
      *      No effect if powerOn is false.
      * @param preferredForEmergencyCall indicate whether the following emergency call will be sent
      *      on this modem or not. No effect if forEmergencyCall is false, or powerOn is false.
      *
      * Response callback is IRadioConfigResponse. setRadioPowerResponse_1_5.
      */
     oneway setRadioPower_1_5(int32_t serial, bool powerOn, bool forEmergencyCall,
             bool preferredForEmergencyCall);

     /**
      * Sets the indication filter.
      *
      * Prevents the reporting of specified unsolicited indications from the radio. This is used
      * for power saving in instances when those indications are not needed. If unset, defaults to
      * @1.5::IndicationFilter:ALL.
      *
      * @param serial Serial number of request.
      * @param indicationFilter 32-bit bitmap of IndicationFilter. Bits set to 1 indicate the
      *     indications are enabled. See @1.5::IndicationFilter for the definition of each bit.
      *
      * Response callback is IRadioResponse.setIndicationFilterResponse()
      */
     oneway setIndicationFilter_1_5(int32_t serial, bitfield<IndicationFilter> indicationFilter);

     /**
      * Get all the barring info for the current camped cell applicable to the current user.
      *
      * @param serial Serial number of request.
      *
      * Response callback is IRadioResponse.getBarringInfoResponse()
      */
     oneway getBarringInfo(int32_t serial);

     /**
      * Request current voice registration state.
      *
      * @param serial Serial number of request.
      *
      * Response function is IRadioResponse.getVoiceRegistrationStateResponse_1_5()
      */
     oneway getVoiceRegistrationState_1_5(int32_t serial);

     /**
      * Request current data registration state.
      *
      * @param serial Serial number of request.
      *
      * Response function is IRadioResponse.getDataRegistrationStateResponse_1_5()
      */
     oneway getDataRegistrationState_1_5(int32_t serial);

     /*
      * Manually select a specified network.
      * This request must not respond until the new operator is selected and registered.
      * Per TS 23.122, the RAN is just the initial suggested value.
      * If registration fails, the RAN is not available afterwards, or the RAN is not within
      * the network types specified by IRadio::setPreferredNetworkTypeBitmap, then the modem
      * will need to select the next best RAN for network registration.
      *
      * @param serial Serial number of request.
      * @param operatorNumeric String specifying MCCMNC of network to select (eg "310170").
      * @param ran Initial suggested radio access network type. If value is UNKNOWN, the modem
      *     will select the next best RAN for network registration.
      *
      * Response function is IRadioResponse.setNetworkSelectionModeManualResponse_1_5()
      */
     oneway setNetworkSelectionModeManual_1_5(int32_t serial, string operatorNumeric,
             RadioAccessNetworks ran);

     /**
      * Send an SMS message. Identical to sendCdmaSms,
      * except that more messages are expected to be sent soon.
      *
      * @param serial Serial number of request.
      * @param sms Cdma Sms to be sent described by CdmaSmsMessage in types.hal
      *
      * Response callback is IRadioResponse.sendCdmaSMSExpectMoreResponse()
      */
     oneway sendCdmaSmsExpectMore(int32_t serial, CdmaSmsMessage sms);

     /**
      * Request that deactivates one category of device personalization. Device personalization
      * generally binds the device so it can only be used on one carrier or even one carrier subnet
      * (See TS 22.022). When the user has gained the rights to unbind the device (at the end of a
      * contract period or other event), the controlKey will be delivered to either the user for
      * manual entry or to a carrier app on the device for automatic entry.
      *
      * @param serial Serial number of request.
      * @param persoType SIM personalization type.
      * @param controlKey the unlock code for removing persoType personalization from this device
      *
      * Response function is IRadioResponse.supplySimDepersonalizationResponse()
      */
     oneway supplySimDepersonalization(int32_t serial, PersoSubstate persoType, string controlKey);
 };
	/*
	* Copyright (C) 2019 The Android Open Source Project
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/

	package android.hardware.radio@1.5;

	import @1.0::CdmaSmsMessage;
	import @1.2::DataRequestReason;
	import @1.4::IRadio;
	import @1.5::AccessNetwork;
	import @1.5::DataProfileInfo;
	import @1.5::IndicationFilter;
	import @1.5::LinkAddress;
	import @1.5::NetworkScanRequest;
	import @1.5::PersoSubstate;
	import @1.5::RadioAccessNetworks;
	import @1.5::RadioAccessSpecifier;
	import @1.5::SignalThresholdInfo;

	/**
	* This interface is used by telephony and telecom to talk to cellular radio.
	* All the functions have minimum one parameter:
	* serial: which corresponds to serial no. of request. Serial numbers must only be memorized for the
	* duration of a method call. If clients provide colliding serials (including passing the same
	* serial to different methods), multiple responses (one for each method call) must still be served.
	* setResponseFunctions must work with @1.5::IRadioResponse and @1.5::IRadioIndication.
	*/
	interface IRadio extends @1.4::IRadio {
	/**
	* Sets the signal strength reporting criteria.
	*
	* The resulting reporting rules are the AND of all the supplied criteria. For each RAN
	* The hysteresisDb and thresholds apply to only the following measured quantities:
	* -GERAN - RSSI
	* -CDMA2000 - RSSI
	* -UTRAN - RSCP
	* -EUTRAN - RSRP/RSRQ/RSSNR
	* -NGRAN - SSRSRP/SSRSRQ/SSSINR
	*
	* Note: Reporting criteria must be individually set for each RAN. For each RAN, if none of
	* reporting criteria of any measurement is set enabled
	* (see @1.5::SignalThresholdInfo.isEnabled), the reporting criteria for this RAN is
	* implementation-defined. For each RAN, if any of reporting criteria of any measure is set
	* enabled, the reporting criteria of the other measures in this RAN are set disabled
	* (see @1.5::SignalThresholdInfo.isEnabled) until they are set enabled.
	*
	* Response callback is
	* IRadioResponse.setSignalStrengthReportingCriteriaResponse_1_5()
	*
	* @param serial Serial number of request.
	* @param signalThresholdInfo Signal threshold info including the threshold values,
	* hysteresisDb, hysteresisMs and isEnabled.
	* See @1.5::SignalThresholdInfo for details.
	* @param accessNetwork The type of network for which to apply these thresholds.
	*/
	oneway setSignalStrengthReportingCriteria_1_5(int32_t serial,
	SignalThresholdInfo signalThresholdInfo, AccessNetwork accessNetwork);

	/**
	* Sets the link capacity reporting criteria.
	*
	* The resulting reporting criteria are the AND of all the supplied criteria.
	*
	* Note: Reporting criteria must be individually set for each RAN. If unset, reporting criteria
	* for that RAN are implementation-defined.
	*
	* Response callback is IRadioResponse.setLinkCapacityReportingCriteriaResponse_1_5().
	*
	* @param serial Serial number of request.
	* @param hysteresisMs A hysteresis time in milliseconds to prevent flapping. A value of 0
	* disables hysteresis.
	* @param hysteresisDlKbps An interval in kbps defining the required magnitude change between DL
	* reports. hysteresisDlKbps must be smaller than the smallest threshold delta. A value of 0
	* disables hysteresis.
	* @param hysteresisUlKbps An interval in kbps defining the required magnitude change between UL
	* reports. hysteresisUlKbps must be smaller than the smallest threshold delta. A value of 0
	* disables hysteresis.
	* @param thresholdsDownlinkKbps A vector of trigger thresholds in kbps for downlink reports. A
	* vector size of 0 disables the use of DL thresholds for reporting.
	* @param thresholdsUplinkKbps A vector of trigger thresholds in kbps for uplink reports. A
	* vector size of 0 disables the use of UL thresholds for reporting.
	* @param accessNetwork The type of network for which to apply these thresholds.
	*/
	oneway setLinkCapacityReportingCriteria_1_5(int32_t serial, int32_t hysteresisMs,
	int32_t hysteresisDlKbps, int32_t hysteresisUlKbps, vec<int32_t> thresholdsDownlinkKbps,
	vec<int32_t> thresholdsUplinkKbps, AccessNetwork accessNetwork);

	/**
	* Enable or disable UiccApplications on the SIM. If disabled:
	* - Modem will not register on any network.
	* - SIM must be PRESENT, and the IccId of the SIM must still be accessible.
	* - The corresponding modem stack is still functional, e.g. able to make emergency calls or
	* do network scan.
	* By default if this API is not called, the uiccApplications must be enabled automatically.
	* It must work for both single SIM and DSDS cases for UX consistency.
	* The preference is per SIM, and must be remembered over power cycle, modem reboot, or SIM
	* insertion / unplug.
	*
	* @param serial Serial number of request.
	* @param enable true if to enable uiccApplications, false to disable.

	* Response callback is IRadioResponse.enableUiccApplicationsResponse()
	*/
	oneway enableUiccApplications(int32_t serial, bool enable);

	/**
	* Whether uiccApplications are enabled, or disabled.
	*
	* By default uiccApplications must be enabled, unless enableUiccApplications() with enable
	* being false is called.
	*
	* @param serial Serial number of request.
	*
	* Response callback is IRadioResponse.areUiccApplicationsEnabledResponse()
	*/
	oneway areUiccApplicationsEnabled(int32_t serial);

	/**
	* Specify which bands modem's background scan must act on.
	* If specifyChannels is true, it only scans bands specified in specifiers.
	* If specifyChannels is false, it scans all bands.
	*
	* For example, CBRS is only on LTE band 48. By specifying this band,
	* modem saves more power.
	*
	* @param serial Serial number of request.
	* @param specifyChannels whether to scan bands defined in specifiers.
	* @param specifiers which bands to scan. Only used if specifyChannels is true.
	*
	* Response callback is IRadioResponse.setSystemSelectionChannelsResponse()
	*/
	oneway setSystemSelectionChannels_1_5(int32_t serial, bool specifyChannels,
	vec<RadioAccessSpecifier> specifiers);

	/**
	* Starts a network scan.
	*
	* @param serial Serial number of request.
	* @param request Defines the radio networks/bands/channels which need to be scanned.
	*
	* Same API as @1.4::IRadio.startNetworkScan_1_4, except using the
	* 1.5 NetworkScanRequest as the input param.
	*/
	oneway startNetworkScan_1_5(int32_t serial, NetworkScanRequest request);

	/**
	* Setup a packet data connection. If DataCallResponse.status returns DataCallFailCause:NONE,
	* the data connection must be added to data calls and a unsolDataCallListChanged() must be
	* sent. The call remains until removed by subsequent unsolDataCallIstChanged(). It may be
	* lost due to many factors, including deactivateDataCall() being issued, the radio powered
	* off, reception lost or even transient factors like congestion. This data call list is
	* returned by getDataCallList() and dataCallListChanged().
	*
	* The Radio is expected to:
	* - Create one data call context.
	* - Create and configure a dedicated interface for the context.
	* - The interface must be point to point.
	* - The interface is configured with one or more addresses and is capable of sending and
	* receiving packets. The prefix length of the addresses must be /32 for IPv4 and /128
	* for IPv6.
	* - Must not modify routing configuration related to this interface; routing management is
	* exclusively within the purview of the Android OS.
	* - Support simultaneous data call contexts up to DataRegStateResult.maxDataCalls specified
	* in the response of getDataRegistrationState.
	*
	* @param serial Serial number of request.
	* @param accessNetwork The access network to setup the data call. If the data connection cannot
	* be established on the specified access network, the setup request must be failed.
	* @param dataProfileInfo Data profile info.
	* @param roamingAllowed Indicates whether or not data roaming is allowed by the user.
	* @param reason The request reason. Must be DataRequestReason.NORMAL or
	* DataRequestReason.HANDOVER.
	* @param addresses If the reason is DataRequestReason.HANDOVER, this indicates the list of link
	* addresses of the existing data connection. This parameter must be ignored unless reason
	* is DataRequestReason.HANDOVER.
	* @param dnses If the reason is DataRequestReason.HANDOVER, this indicates the list of DNS
	* addresses of the existing data connection. The format is defined in RFC-4291 section
	* 2.2. For example, "192.0.1.3" or "2001:db8::1". This parameter must be ignored unless
	* reason is DataRequestReason.HANDOVER.
	*
	* Response function is IRadioResponse.setupDataCallResponse_1_5()
	*
	* Note this API is the same as the 1.4 version except using the
	* 1.5 AccessNetwork, DataProfileInto, and LinkAddress as the input param.
	*/
	oneway setupDataCall_1_5(int32_t serial, AccessNetwork accessNetwork,
	DataProfileInfo dataProfileInfo, bool roamingAllowed,
	DataRequestReason reason, vec<LinkAddress> addresses, vec<string> dnses);

	/**
	* Set an APN to initial attach network.
	*
	* @param serial Serial number of request.
	* @param dataProfileInfo data profile containing APN settings
	*
	* Response callback is IRadioResponse.setInitialAttachApnResponse_1_5()
	*
	* Note this API is the same as the 1.4 version except using the 1.5 DataProfileInfo
	* as the input param.
	*/
	oneway setInitialAttachApn_1_5(int32_t serial, DataProfileInfo dataProfileInfo);

	/**
	* Send data profiles of the current carrier to the modem.
	*
	* @param serial Serial number of request.
	* @param profiles Array of DataProfileInfo to set.
	*
	* Response callback is IRadioResponse.setDataProfileResponse_1_5()
	*
	* Note this API is the same as the 1.4 version except using the 1.5 DataProfileInfo
	* as the input param.
	*/
	oneway setDataProfile_1_5(int32_t serial, vec<DataProfileInfo> profiles);

	/**
	* Toggle radio on and off (for "airplane" mode)
	* If the radio is turned off/on the radio modem subsystem
	* is expected return to an initialized state. For instance,
	* any voice and data calls must be terminated and all associated
	* lists emptied.
	*
	* When setting radio power on to exit from airplane mode to place an emergency call on this
	* logical modem, powerOn, forEmergencyCall and preferredForEmergencyCall must be true. In
	* this case, this modem is optimized to scan only emergency call bands, until:
	* 1) Emergency call is completed; or
	* 2) Another setRadioPower_1_5 is issued with forEmergencyCall being false or
	* preferredForEmergencyCall being false; or
	* 3) Timeout after 30 seconds if dial or emergencyDial is not called.
	* Once one of these conditions is reached, the modem should move into normal operation.
	*
	* @param serial Serial number of request.
	* @param powerOn To turn on radio -> on = true, to turn off radio -> on = false.
	* @param forEmergencyCall To indication to radio if this request is due to emergency call.
	* No effect if powerOn is false.
	* @param preferredForEmergencyCall indicate whether the following emergency call will be sent
	* on this modem or not. No effect if forEmergencyCall is false, or powerOn is false.
	*
	* Response callback is IRadioConfigResponse. setRadioPowerResponse_1_5.
	*/
	oneway setRadioPower_1_5(int32_t serial, bool powerOn, bool forEmergencyCall,
	bool preferredForEmergencyCall);

	/**
	* Sets the indication filter.
	*
	* Prevents the reporting of specified unsolicited indications from the radio. This is used
	* for power saving in instances when those indications are not needed. If unset, defaults to
	* @1.5::IndicationFilter:ALL.
	*
	* @param serial Serial number of request.
	* @param indicationFilter 32-bit bitmap of IndicationFilter. Bits set to 1 indicate the
	* indications are enabled. See @1.5::IndicationFilter for the definition of each bit.
	*
	* Response callback is IRadioResponse.setIndicationFilterResponse()
	*/
	oneway setIndicationFilter_1_5(int32_t serial, bitfield<IndicationFilter> indicationFilter);

	/**
	* Get all the barring info for the current camped cell applicable to the current user.
	*
	* @param serial Serial number of request.
	*
	* Response callback is IRadioResponse.getBarringInfoResponse()
	*/
	oneway getBarringInfo(int32_t serial);

	/**
	* Request current voice registration state.
	*
	* @param serial Serial number of request.
	*
	* Response function is IRadioResponse.getVoiceRegistrationStateResponse_1_5()
	*/
	oneway getVoiceRegistrationState_1_5(int32_t serial);

	/**
	* Request current data registration state.
	*
	* @param serial Serial number of request.
	*
	* Response function is IRadioResponse.getDataRegistrationStateResponse_1_5()
	*/
	oneway getDataRegistrationState_1_5(int32_t serial);

	/*
	* Manually select a specified network.
	* This request must not respond until the new operator is selected and registered.
	* Per TS 23.122, the RAN is just the initial suggested value.
	* If registration fails, the RAN is not available afterwards, or the RAN is not within
	* the network types specified by IRadio::setPreferredNetworkTypeBitmap, then the modem
	* will need to select the next best RAN for network registration.
	*
	* @param serial Serial number of request.
	* @param operatorNumeric String specifying MCCMNC of network to select (eg "310170").
	* @param ran Initial suggested radio access network type. If value is UNKNOWN, the modem
	* will select the next best RAN for network registration.
	*
	* Response function is IRadioResponse.setNetworkSelectionModeManualResponse_1_5()
	*/
	oneway setNetworkSelectionModeManual_1_5(int32_t serial, string operatorNumeric,
	RadioAccessNetworks ran);

	/**
	* Send an SMS message. Identical to sendCdmaSms,
	* except that more messages are expected to be sent soon.
	*
	* @param serial Serial number of request.
	* @param sms Cdma Sms to be sent described by CdmaSmsMessage in types.hal
	*
	* Response callback is IRadioResponse.sendCdmaSMSExpectMoreResponse()
	*/
	oneway sendCdmaSmsExpectMore(int32_t serial, CdmaSmsMessage sms);

	/**
	* Request that deactivates one category of device personalization. Device personalization
	* generally binds the device so it can only be used on one carrier or even one carrier subnet
	* (See TS 22.022). When the user has gained the rights to unbind the device (at the end of a
	* contract period or other event), the controlKey will be delivered to either the user for
	* manual entry or to a carrier app on the device for automatic entry.
	*
	* @param serial Serial number of request.
	* @param persoType SIM personalization type.
	* @param controlKey the unlock code for removing persoType personalization from this device
	*
	* Response function is IRadioResponse.supplySimDepersonalizationResponse()
	*/
	oneway supplySimDepersonalization(int32_t serial, PersoSubstate persoType, string controlKey);
	};