MLK-11800 dts: imx7d-sdb: correct flexcan stby gpio pin
According to schematic, the pad used for CAN STBY signal
should be EPDC_DATA14, not GPIO1_IO07. So correct it.
And due to pin is conflict with epdc, so we also update
the imx7d-sdb-epdc.dts.
Reported-by: Peng Fan <Peng.Fan@freescale.com>
Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com>
diff --git a/arch/arm/boot/dts/imx7d-sdb-epdc.dts b/arch/arm/boot/dts/imx7d-sdb-epdc.dts
index 9dcb9d7..fc2c656 100644
--- a/arch/arm/boot/dts/imx7d-sdb-epdc.dts
+++ b/arch/arm/boot/dts/imx7d-sdb-epdc.dts
@@ -20,6 +20,10 @@
status = "disabled";
};
+&flexcan2 {
+ status = "disabled";
+};
+
&max17135 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 696f9ba..b286a18 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -63,7 +63,7 @@
regulator-name = "can2-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ gpio = <&gpio2 14 GPIO_ACTIVE_LOW>;
};
reg_vref_1v8: regulator@3 {
@@ -930,7 +930,7 @@
pinctrl_hog_2: hoggrp-2 {
fsl,pins = <
MX7D_PAD_GPIO1_IO05__GPIO1_IO5 0x14
- MX7D_PAD_GPIO1_IO07__GPIO1_IO7 0x59 /* CAN_STBY */
+ MX7D_PAD_EPDC_DATA14__GPIO2_IO14 0x59 /* CAN_STBY */
MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B 0x74
>;
};
