| /* |
| * Copyright 2023 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "CursorInputMapper.h" |
| |
| #include <list> |
| #include <optional> |
| #include <string> |
| #include <tuple> |
| #include <variant> |
| |
| #include <android-base/logging.h> |
| #include <android/configuration.h> |
| #include <android_companion_virtualdevice_flags.h> |
| #include <com_android_input_flags.h> |
| #include <gmock/gmock.h> |
| #include <gtest/gtest.h> |
| #include <input/AccelerationCurve.h> |
| #include <input/DisplayViewport.h> |
| #include <input/InputEventLabels.h> |
| #include <linux/input-event-codes.h> |
| #include <linux/input.h> |
| #include <utils/Timers.h> |
| |
| #include "InputMapperTest.h" |
| #include "InputReaderBase.h" |
| #include "InterfaceMocks.h" |
| #include "NotifyArgs.h" |
| #include "ScopedFlagOverride.h" |
| #include "TestEventMatchers.h" |
| #include "ui/Rotation.h" |
| |
| #define TAG "CursorInputMapper_test" |
| |
| namespace input_flags = com::android::input::flags; |
| |
| namespace android { |
| |
| using testing::AllOf; |
| using testing::Return; |
| using testing::VariantWith; |
| constexpr auto ACTION_DOWN = AMOTION_EVENT_ACTION_DOWN; |
| constexpr auto ACTION_MOVE = AMOTION_EVENT_ACTION_MOVE; |
| constexpr auto ACTION_UP = AMOTION_EVENT_ACTION_UP; |
| constexpr auto BUTTON_PRESS = AMOTION_EVENT_ACTION_BUTTON_PRESS; |
| constexpr auto BUTTON_RELEASE = AMOTION_EVENT_ACTION_BUTTON_RELEASE; |
| constexpr auto HOVER_MOVE = AMOTION_EVENT_ACTION_HOVER_MOVE; |
| constexpr auto INVALID_CURSOR_POSITION = AMOTION_EVENT_INVALID_CURSOR_POSITION; |
| constexpr auto AXIS_X = AMOTION_EVENT_AXIS_X; |
| constexpr auto AXIS_Y = AMOTION_EVENT_AXIS_Y; |
| constexpr auto AXIS_RELATIVE_X = AMOTION_EVENT_AXIS_RELATIVE_X; |
| constexpr auto AXIS_RELATIVE_Y = AMOTION_EVENT_AXIS_RELATIVE_Y; |
| constexpr ui::LogicalDisplayId DISPLAY_ID = ui::LogicalDisplayId::DEFAULT; |
| constexpr ui::LogicalDisplayId SECONDARY_DISPLAY_ID = ui::LogicalDisplayId{DISPLAY_ID.val() + 1}; |
| constexpr int32_t DISPLAY_WIDTH = 480; |
| constexpr int32_t DISPLAY_HEIGHT = 800; |
| |
| constexpr int32_t TRACKBALL_MOVEMENT_THRESHOLD = 6; |
| |
| namespace { |
| |
| DisplayViewport createPrimaryViewport(ui::Rotation orientation, |
| int32_t densityDpi = ACONFIGURATION_DENSITY_XHIGH, |
| float xDpi = ACONFIGURATION_DENSITY_NONE, |
| float yDpi = ACONFIGURATION_DENSITY_NONE) { |
| const bool isRotated = |
| orientation == ui::Rotation::Rotation90 || orientation == ui::Rotation::Rotation270; |
| DisplayViewport v; |
| v.displayId = DISPLAY_ID; |
| v.orientation = orientation; |
| v.logicalRight = isRotated ? DISPLAY_HEIGHT : DISPLAY_WIDTH; |
| v.logicalBottom = isRotated ? DISPLAY_WIDTH : DISPLAY_HEIGHT; |
| v.physicalRight = isRotated ? DISPLAY_HEIGHT : DISPLAY_WIDTH; |
| v.physicalBottom = isRotated ? DISPLAY_WIDTH : DISPLAY_HEIGHT; |
| v.deviceWidth = isRotated ? DISPLAY_HEIGHT : DISPLAY_WIDTH; |
| v.deviceHeight = isRotated ? DISPLAY_WIDTH : DISPLAY_HEIGHT; |
| v.isActive = true; |
| v.uniqueId = "local:1"; |
| v.densityDpi = densityDpi; |
| v.xDpi = xDpi; |
| v.yDpi = yDpi; |
| return v; |
| } |
| |
| DisplayViewport createSecondaryViewport() { |
| DisplayViewport v; |
| v.displayId = SECONDARY_DISPLAY_ID; |
| v.orientation = ui::Rotation::Rotation0; |
| v.logicalRight = DISPLAY_HEIGHT; |
| v.logicalBottom = DISPLAY_WIDTH; |
| v.physicalRight = DISPLAY_HEIGHT; |
| v.physicalBottom = DISPLAY_WIDTH; |
| v.deviceWidth = DISPLAY_HEIGHT; |
| v.deviceHeight = DISPLAY_WIDTH; |
| v.isActive = true; |
| v.uniqueId = "local:2"; |
| v.type = ViewportType::EXTERNAL; |
| return v; |
| } |
| |
| // In a number of these tests, we want to check that some pointer motion is reported without |
| // specifying an exact value, as that would require updating the tests every time the pointer |
| // ballistics was changed. To do this, we make some matchers that only check the sign of a |
| // particular axis. |
| MATCHER_P(WithPositiveAxis, axis, "MotionEvent with a positive axis value") { |
| *result_listener << "expected 1 pointer with a positive " |
| << InputEventLookup::getAxisLabel(axis) << " axis but got " |
| << arg.pointerCoords.size() << " pointers, with axis value " |
| << arg.pointerCoords[0].getAxisValue(axis); |
| return arg.pointerCoords.size() == 1 && arg.pointerCoords[0].getAxisValue(axis) > 0; |
| } |
| |
| MATCHER_P(WithZeroAxis, axis, "MotionEvent with a zero axis value") { |
| *result_listener << "expected 1 pointer with a zero " << InputEventLookup::getAxisLabel(axis) |
| << " axis but got " << arg.pointerCoords.size() |
| << " pointers, with axis value " << arg.pointerCoords[0].getAxisValue(axis); |
| return arg.pointerCoords.size() == 1 && arg.pointerCoords[0].getAxisValue(axis) == 0; |
| } |
| |
| MATCHER_P(WithNegativeAxis, axis, "MotionEvent with a negative axis value") { |
| *result_listener << "expected 1 pointer with a negative " |
| << InputEventLookup::getAxisLabel(axis) << " axis but got " |
| << arg.pointerCoords.size() << " pointers, with axis value " |
| << arg.pointerCoords[0].getAxisValue(axis); |
| return arg.pointerCoords.size() == 1 && arg.pointerCoords[0].getAxisValue(axis) < 0; |
| } |
| |
| } // namespace |
| |
| namespace vd_flags = android::companion::virtualdevice::flags; |
| |
| /** |
| * Unit tests for CursorInputMapper. |
| * These classes are named 'CursorInputMapperUnitTest...' to avoid name collision with the existing |
| * 'CursorInputMapperTest...' classes. If all of the CursorInputMapper tests are migrated here, the |
| * name can be simplified to 'CursorInputMapperTest'. |
| * |
| * TODO(b/283812079): move the remaining CursorInputMapper tests here. The ones that are left all |
| * depend on viewport association, for which we'll need to fake InputDeviceContext. |
| */ |
| class CursorInputMapperUnitTestBase : public InputMapperUnitTest { |
| protected: |
| void SetUp() override { SetUp(BUS_USB, /*isExternal=*/false); } |
| void SetUp(int bus, bool isExternal) override { |
| InputMapperUnitTest::SetUp(bus, isExternal); |
| |
| // Current scan code state - all keys are UP by default |
| setScanCodeState(KeyState::UP, |
| {BTN_LEFT, BTN_RIGHT, BTN_MIDDLE, BTN_BACK, BTN_SIDE, BTN_FORWARD, |
| BTN_EXTRA, BTN_TASK}); |
| EXPECT_CALL(mMockEventHub, hasRelativeAxis(EVENTHUB_ID, REL_WHEEL)) |
| .WillRepeatedly(Return(false)); |
| EXPECT_CALL(mMockEventHub, hasRelativeAxis(EVENTHUB_ID, REL_HWHEEL)) |
| .WillRepeatedly(Return(false)); |
| EXPECT_CALL(mMockEventHub, hasRelativeAxis(EVENTHUB_ID, REL_WHEEL_HI_RES)) |
| .WillRepeatedly(Return(false)); |
| EXPECT_CALL(mMockEventHub, hasRelativeAxis(EVENTHUB_ID, REL_HWHEEL_HI_RES)) |
| .WillRepeatedly(Return(false)); |
| |
| mFakePolicy->setDefaultPointerDisplayId(DISPLAY_ID); |
| mFakePolicy->addDisplayViewport(createPrimaryViewport(ui::Rotation::Rotation0)); |
| } |
| |
| void createMapper() { |
| mMapper = createInputMapper<CursorInputMapper>(*mDeviceContext, mReaderConfiguration); |
| } |
| |
| void setPointerCapture(bool enabled) { |
| mReaderConfiguration.pointerCaptureRequest.window = enabled ? sp<BBinder>::make() : nullptr; |
| mReaderConfiguration.pointerCaptureRequest.mode = |
| enabled ? PointerCaptureMode::ABSOLUTE : PointerCaptureMode::UNCAPTURED; |
| mReaderConfiguration.pointerCaptureRequest.seq = 1; |
| int32_t generation = mDevice->getGeneration(); |
| std::list<NotifyArgs> args = |
| mMapper->reconfigure(ARBITRARY_TIME, mReaderConfiguration, |
| InputReaderConfiguration::Change::POINTER_CAPTURE); |
| ASSERT_THAT(args, |
| ElementsAre(VariantWith<NotifyDeviceResetArgs>( |
| AllOf(WithDeviceId(DEVICE_ID), WithEventTime(ARBITRARY_TIME))))); |
| |
| // Check that generation also got bumped |
| ASSERT_GT(mDevice->getGeneration(), generation); |
| } |
| |
| void testRotation(int32_t originalX, int32_t originalY, |
| const testing::Matcher<NotifyMotionArgs>& coordsMatcher) { |
| std::list<NotifyArgs> args; |
| args += process(ARBITRARY_TIME, EV_REL, REL_X, originalX); |
| args += process(ARBITRARY_TIME, EV_REL, REL_Y, originalY); |
| args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); |
| ASSERT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(ACTION_MOVE), coordsMatcher)))); |
| } |
| }; |
| |
| class CursorInputMapperUnitTest : public CursorInputMapperUnitTestBase { |
| protected: |
| void SetUp() override { |
| vd_flags::high_resolution_scroll(false); |
| CursorInputMapperUnitTestBase::SetUp(); |
| } |
| }; |
| |
| TEST_F(CursorInputMapperUnitTest, GetSourcesReturnsMouseInPointerMode) { |
| mPropertyMap.addProperty("cursor.mode", "pointer"); |
| createMapper(); |
| |
| ASSERT_EQ(AINPUT_SOURCE_MOUSE, mMapper->getSources()); |
| } |
| |
| TEST_F(CursorInputMapperUnitTest, GetSourcesReturnsTrackballInNavigationMode) { |
| mPropertyMap.addProperty("cursor.mode", "navigation"); |
| createMapper(); |
| |
| ASSERT_EQ(AINPUT_SOURCE_TRACKBALL, mMapper->getSources()); |
| } |
| |
| /** |
| * Move the mouse and then click the button. Check whether HOVER_EXIT is generated when hovering |
| * ends. Currently, it is not. |
| */ |
| TEST_F(CursorInputMapperUnitTest, HoverAndLeftButtonPress) { |
| createMapper(); |
| std::list<NotifyArgs> args; |
| |
| // Move the cursor a little |
| args += process(EV_REL, REL_X, 10); |
| args += process(EV_REL, REL_Y, 20); |
| args += process(EV_SYN, SYN_REPORT, 0); |
| ASSERT_THAT(args, ElementsAre(VariantWith<NotifyMotionArgs>(WithMotionAction(HOVER_MOVE)))); |
| |
| // Now click the mouse button |
| args.clear(); |
| args += process(EV_KEY, BTN_LEFT, 1); |
| args += process(EV_SYN, SYN_REPORT, 0); |
| |
| ASSERT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>(WithMotionAction(ACTION_DOWN)), |
| VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(BUTTON_PRESS), |
| WithActionButton(AMOTION_EVENT_BUTTON_PRIMARY))))); |
| ASSERT_THAT(args, |
| Each(VariantWith<NotifyMotionArgs>(WithButtonState(AMOTION_EVENT_BUTTON_PRIMARY)))); |
| |
| // Move some more. |
| args.clear(); |
| args += process(EV_REL, REL_X, 10); |
| args += process(EV_REL, REL_Y, 20); |
| args += process(EV_SYN, SYN_REPORT, 0); |
| ASSERT_THAT(args, ElementsAre(VariantWith<NotifyMotionArgs>(WithMotionAction(ACTION_MOVE)))); |
| |
| // Release the button |
| args.clear(); |
| args += process(EV_KEY, BTN_LEFT, 0); |
| args += process(EV_SYN, SYN_REPORT, 0); |
| ASSERT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(BUTTON_RELEASE), |
| WithActionButton(AMOTION_EVENT_BUTTON_PRIMARY))), |
| VariantWith<NotifyMotionArgs>(WithMotionAction(ACTION_UP)), |
| VariantWith<NotifyMotionArgs>(WithMotionAction(HOVER_MOVE)))); |
| } |
| |
| TEST_F(CursorInputMapperUnitTest, MoveAndButtonChangeInSameFrame) { |
| createMapper(); |
| std::list<NotifyArgs> args; |
| |
| // Move the cursor and press the button |
| args += process(EV_REL, REL_X, -10); |
| args += process(EV_REL, REL_Y, 20); |
| args += process(EV_KEY, BTN_LEFT, 1); |
| args += process(EV_SYN, SYN_REPORT, 0); |
| ASSERT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(HOVER_MOVE), WithButtonState(0), |
| WithNegativeAxis(AXIS_RELATIVE_X), |
| WithPositiveAxis(AXIS_RELATIVE_Y), WithPressure(0.0f))), |
| VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(ACTION_DOWN), |
| WithButtonState(AMOTION_EVENT_BUTTON_PRIMARY), |
| WithZeroAxis(AXIS_RELATIVE_X), |
| WithZeroAxis(AXIS_RELATIVE_Y), WithPressure(1.0f))), |
| VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(BUTTON_PRESS), |
| WithActionButton(AMOTION_EVENT_BUTTON_PRIMARY), |
| WithButtonState(AMOTION_EVENT_BUTTON_PRIMARY), |
| WithZeroAxis(AXIS_RELATIVE_X), |
| WithZeroAxis(AXIS_RELATIVE_Y), WithPressure(1.0f))))); |
| |
| // Move some more and release the button |
| args.clear(); |
| args += process(EV_REL, REL_X, 10); |
| args += process(EV_REL, REL_Y, -5); |
| args += process(EV_KEY, BTN_LEFT, 0); |
| args += process(EV_SYN, SYN_REPORT, 0); |
| ASSERT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(ACTION_MOVE), |
| WithButtonState(AMOTION_EVENT_BUTTON_PRIMARY), |
| WithPositiveAxis(AXIS_RELATIVE_X), |
| WithNegativeAxis(AXIS_RELATIVE_Y), WithPressure(1.0f))), |
| VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(BUTTON_RELEASE), |
| WithActionButton(AMOTION_EVENT_BUTTON_PRIMARY), |
| WithButtonState(0), WithZeroAxis(AXIS_RELATIVE_X), |
| WithZeroAxis(AXIS_RELATIVE_Y), WithPressure(0.0f))), |
| VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(ACTION_UP), WithButtonState(0), |
| WithZeroAxis(AXIS_RELATIVE_X), |
| WithZeroAxis(AXIS_RELATIVE_Y), WithPressure(0.0f))), |
| VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(HOVER_MOVE), WithButtonState(0), |
| WithZeroAxis(AXIS_RELATIVE_X), |
| WithZeroAxis(AXIS_RELATIVE_Y), WithPressure(0.0f))))); |
| } |
| |
| /** |
| * Test that enabling mouse swap primary button will have the left click result in a |
| * `SECONDARY_BUTTON` event and a right click will result in a `PRIMARY_BUTTON` event. |
| */ |
| TEST_F(CursorInputMapperUnitTest, SwappedPrimaryButtonPress) { |
| mReaderConfiguration.mouseSwapPrimaryButtonEnabled = true; |
| createMapper(); |
| std::list<NotifyArgs> args; |
| |
| // Now click the left mouse button , expect a `SECONDARY_BUTTON` button state. |
| args.clear(); |
| args += process(EV_KEY, BTN_LEFT, 1); |
| args += process(EV_SYN, SYN_REPORT, 0); |
| |
| ASSERT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>(WithMotionAction(ACTION_DOWN)), |
| VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(BUTTON_PRESS), |
| WithActionButton(AMOTION_EVENT_BUTTON_SECONDARY))))); |
| ASSERT_THAT(args, |
| Each(VariantWith<NotifyMotionArgs>( |
| WithButtonState(AMOTION_EVENT_BUTTON_SECONDARY)))); |
| |
| // Release the left button. |
| args.clear(); |
| args += process(EV_KEY, BTN_LEFT, 0); |
| args += process(EV_SYN, SYN_REPORT, 0); |
| |
| ASSERT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(BUTTON_RELEASE), |
| WithActionButton(AMOTION_EVENT_BUTTON_SECONDARY))), |
| VariantWith<NotifyMotionArgs>(WithMotionAction(ACTION_UP)), |
| VariantWith<NotifyMotionArgs>(WithMotionAction(HOVER_MOVE)))); |
| |
| // Now click the right mouse button , expect a `PRIMARY_BUTTON` button state. |
| args.clear(); |
| args += process(EV_KEY, BTN_RIGHT, 1); |
| args += process(EV_SYN, SYN_REPORT, 0); |
| |
| ASSERT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>(WithMotionAction(ACTION_DOWN)), |
| VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(BUTTON_PRESS), |
| WithActionButton(AMOTION_EVENT_BUTTON_PRIMARY))))); |
| ASSERT_THAT(args, |
| Each(VariantWith<NotifyMotionArgs>(WithButtonState(AMOTION_EVENT_BUTTON_PRIMARY)))); |
| |
| // Release the right button. |
| args.clear(); |
| args += process(EV_KEY, BTN_RIGHT, 0); |
| args += process(EV_SYN, SYN_REPORT, 0); |
| ASSERT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>(WithMotionAction(BUTTON_RELEASE)), |
| VariantWith<NotifyMotionArgs>(WithMotionAction(ACTION_UP)), |
| VariantWith<NotifyMotionArgs>(WithMotionAction(HOVER_MOVE)))); |
| |
| ASSERT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(BUTTON_RELEASE), |
| WithActionButton(AMOTION_EVENT_BUTTON_PRIMARY))), |
| VariantWith<NotifyMotionArgs>(WithMotionAction(ACTION_UP)), |
| VariantWith<NotifyMotionArgs>(WithMotionAction(HOVER_MOVE)))); |
| } |
| |
| /** |
| * Set pointer capture and check that ACTION_MOVE events are emitted from CursorInputMapper. |
| * During pointer capture, source should be set to MOUSE_RELATIVE. When the capture is disabled, |
| * the events should be generated normally: |
| * 1) The source should return to SOURCE_MOUSE |
| * 2) Cursor position should be incremented by the relative device movements |
| * 3) Cursor position of NotifyMotionArgs should now be getting populated. |
| * When it's not SOURCE_MOUSE, CursorInputMapper doesn't populate cursor position values. |
| */ |
| TEST_F(CursorInputMapperUnitTest, ProcessPointerCapture) { |
| createMapper(); |
| setPointerCapture(true); |
| std::list<NotifyArgs> args; |
| |
| // Move. |
| args += process(EV_REL, REL_X, 10); |
| args += process(EV_REL, REL_Y, 20); |
| args += process(EV_SYN, SYN_REPORT, 0); |
| |
| ASSERT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(ACTION_MOVE), |
| WithSource(AINPUT_SOURCE_MOUSE_RELATIVE), WithCoords(10.0f, 20.0f), |
| WithRelativeMotion(10.0f, 20.0f), |
| WithCursorPosition(INVALID_CURSOR_POSITION, |
| INVALID_CURSOR_POSITION))))); |
| |
| // Button press. |
| args.clear(); |
| args += process(EV_KEY, BTN_MOUSE, 1); |
| args += process(EV_SYN, SYN_REPORT, 0); |
| ASSERT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(ACTION_DOWN), |
| WithSource(AINPUT_SOURCE_MOUSE_RELATIVE), |
| WithCoords(0.0f, 0.0f), WithPressure(1.0f))), |
| VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(BUTTON_PRESS), |
| WithSource(AINPUT_SOURCE_MOUSE_RELATIVE), |
| WithCoords(0.0f, 0.0f), WithPressure(1.0f))))); |
| |
| // Button release. |
| args.clear(); |
| args += process(EV_KEY, BTN_MOUSE, 0); |
| args += process(EV_SYN, SYN_REPORT, 0); |
| ASSERT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>(WithMotionAction(BUTTON_RELEASE)), |
| VariantWith<NotifyMotionArgs>(WithMotionAction(ACTION_UP)))); |
| ASSERT_THAT(args, |
| Each(VariantWith<NotifyMotionArgs>(AllOf(WithSource(AINPUT_SOURCE_MOUSE_RELATIVE), |
| WithCoords(0.0f, 0.0f), |
| WithPressure(0.0f))))); |
| |
| // Another move. |
| args.clear(); |
| args += process(EV_REL, REL_X, 30); |
| args += process(EV_REL, REL_Y, 40); |
| args += process(EV_SYN, SYN_REPORT, 0); |
| ASSERT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(ACTION_MOVE), |
| WithSource(AINPUT_SOURCE_MOUSE_RELATIVE), WithCoords(30.0f, 40.0f), |
| WithRelativeMotion(30.0f, 40.0f))))); |
| |
| // Disable pointer capture. Afterwards, events should be generated the usual way. |
| setPointerCapture(false); |
| const auto expectedCoords = WithCoords(0, 0); |
| const auto expectedCursorPosition = |
| WithCursorPosition(INVALID_CURSOR_POSITION, INVALID_CURSOR_POSITION); |
| args.clear(); |
| args += process(EV_REL, REL_X, 10); |
| args += process(EV_REL, REL_Y, 20); |
| args += process(EV_SYN, SYN_REPORT, 0); |
| ASSERT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(HOVER_MOVE), WithSource(AINPUT_SOURCE_MOUSE), |
| expectedCoords, expectedCursorPosition, |
| WithPositiveAxis(AMOTION_EVENT_AXIS_RELATIVE_X), |
| WithPositiveAxis(AMOTION_EVENT_AXIS_RELATIVE_Y))))); |
| } |
| |
| TEST_F(CursorInputMapperUnitTest, PopulateDeviceInfoReturnsScaledRangeInNavigationMode) { |
| mPropertyMap.addProperty("cursor.mode", "navigation"); |
| createMapper(); |
| |
| InputDeviceInfo info; |
| mMapper->populateDeviceInfo(info); |
| |
| ASSERT_NO_FATAL_FAILURE(assertMotionRange(info, AINPUT_MOTION_RANGE_X, AINPUT_SOURCE_TRACKBALL, |
| -1.0f, 1.0f, 0.0f, |
| 1.0f / TRACKBALL_MOVEMENT_THRESHOLD)); |
| ASSERT_NO_FATAL_FAILURE(assertMotionRange(info, AINPUT_MOTION_RANGE_Y, AINPUT_SOURCE_TRACKBALL, |
| -1.0f, 1.0f, 0.0f, |
| 1.0f / TRACKBALL_MOVEMENT_THRESHOLD)); |
| ASSERT_NO_FATAL_FAILURE(assertMotionRange(info, AINPUT_MOTION_RANGE_PRESSURE, |
| AINPUT_SOURCE_TRACKBALL, 0.0f, 1.0f, 0.0f, 0.0f)); |
| } |
| |
| TEST_F(CursorInputMapperUnitTest, ProcessShouldSetAllFieldsAndIncludeGlobalMetaState) { |
| mPropertyMap.addProperty("cursor.mode", "navigation"); |
| createMapper(); |
| |
| EXPECT_CALL(mMockInputReaderContext, getGlobalMetaState()) |
| .WillRepeatedly(Return(AMETA_SHIFT_LEFT_ON | AMETA_SHIFT_ON)); |
| |
| std::list<NotifyArgs> args; |
| |
| // Button press. |
| // Mostly testing non x/y behavior here so we don't need to check again elsewhere. |
| args += process(ARBITRARY_TIME, EV_KEY, BTN_MOUSE, 1); |
| args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); |
| EXPECT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>(WithMotionAction(ACTION_DOWN)), |
| VariantWith<NotifyMotionArgs>(WithMotionAction(BUTTON_PRESS)))); |
| EXPECT_THAT(args, |
| Each(VariantWith<NotifyMotionArgs>( |
| AllOf(WithEventTime(ARBITRARY_TIME), WithDeviceId(DEVICE_ID), |
| WithSource(AINPUT_SOURCE_TRACKBALL), |
| WithFlags(ftl::Flags<MotionFlag>()), WithPolicyFlags(0), |
| WithMetaState(AMETA_SHIFT_LEFT_ON | AMETA_SHIFT_ON), |
| WithButtonState(AMOTION_EVENT_BUTTON_PRIMARY), WithPointerCount(1), |
| WithPointerId(0, 0), WithToolType(ToolType::MOUSE), |
| WithCoords(0.0f, 0.0f), WithPressure(1.0f), |
| WithPrecision(TRACKBALL_MOVEMENT_THRESHOLD, |
| TRACKBALL_MOVEMENT_THRESHOLD), |
| WithDownTime(ARBITRARY_TIME))))); |
| args.clear(); |
| |
| // Button release. Should have same down time. |
| args += process(ARBITRARY_TIME + 1, EV_KEY, BTN_MOUSE, 0); |
| args += process(ARBITRARY_TIME + 1, EV_SYN, SYN_REPORT, 0); |
| EXPECT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>(WithMotionAction(BUTTON_RELEASE)), |
| VariantWith<NotifyMotionArgs>(WithMotionAction(ACTION_UP)))); |
| EXPECT_THAT(args, |
| Each(VariantWith<NotifyMotionArgs>( |
| AllOf(WithEventTime(ARBITRARY_TIME + 1), WithDeviceId(DEVICE_ID), |
| WithSource(AINPUT_SOURCE_TRACKBALL), |
| WithFlags(ftl::Flags<MotionFlag>()), WithPolicyFlags(0), |
| WithMetaState(AMETA_SHIFT_LEFT_ON | AMETA_SHIFT_ON), |
| WithButtonState(0), WithPointerCount(1), WithPointerId(0, 0), |
| WithToolType(ToolType::MOUSE), WithCoords(0.0f, 0.0f), |
| WithPressure(0.0f), |
| WithPrecision(TRACKBALL_MOVEMENT_THRESHOLD, |
| TRACKBALL_MOVEMENT_THRESHOLD), |
| WithDownTime(ARBITRARY_TIME))))); |
| } |
| |
| TEST_F(CursorInputMapperUnitTest, ProcessShouldHandleIndependentXYUpdates) { |
| mPropertyMap.addProperty("cursor.mode", "navigation"); |
| createMapper(); |
| |
| std::list<NotifyArgs> args; |
| |
| // Motion in X but not Y. |
| args += process(ARBITRARY_TIME, EV_REL, REL_X, 1); |
| args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); |
| EXPECT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(ACTION_MOVE), WithPressure(0.0f), |
| WithPositiveAxis(AXIS_X), WithZeroAxis(AXIS_Y))))); |
| args.clear(); |
| |
| // Motion in Y but not X. |
| args += process(ARBITRARY_TIME, EV_REL, REL_Y, -2); |
| args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); |
| EXPECT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(ACTION_MOVE), WithPressure(0.0f), |
| WithZeroAxis(AXIS_X), WithNegativeAxis(AXIS_Y))))); |
| args.clear(); |
| } |
| |
| TEST_F(CursorInputMapperUnitTest, ProcessShouldHandleIndependentButtonUpdates) { |
| mPropertyMap.addProperty("cursor.mode", "navigation"); |
| createMapper(); |
| |
| std::list<NotifyArgs> args; |
| |
| // Button press. |
| args += process(ARBITRARY_TIME, EV_KEY, BTN_MOUSE, 1); |
| args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); |
| EXPECT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>(WithMotionAction(ACTION_DOWN)), |
| VariantWith<NotifyMotionArgs>(WithMotionAction(BUTTON_PRESS)))); |
| EXPECT_THAT(args, |
| Each(VariantWith<NotifyMotionArgs>( |
| AllOf(WithCoords(0.0f, 0.0f), WithPressure(1.0f))))); |
| args.clear(); |
| |
| // Button release. |
| args += process(ARBITRARY_TIME, EV_KEY, BTN_MOUSE, 0); |
| args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); |
| EXPECT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>(WithMotionAction(BUTTON_RELEASE)), |
| VariantWith<NotifyMotionArgs>(WithMotionAction(ACTION_UP)))); |
| EXPECT_THAT(args, |
| Each(VariantWith<NotifyMotionArgs>( |
| AllOf(WithCoords(0.0f, 0.0f), WithPressure(0.0f))))); |
| } |
| |
| TEST_F(CursorInputMapperUnitTest, ProcessShouldHandleCombinedXYAndButtonUpdates) { |
| mPropertyMap.addProperty("cursor.mode", "navigation"); |
| createMapper(); |
| |
| std::list<NotifyArgs> args; |
| |
| // Combined X, Y and Button. |
| args += process(ARBITRARY_TIME, EV_REL, REL_X, 1); |
| args += process(ARBITRARY_TIME, EV_REL, REL_Y, -2); |
| args += process(ARBITRARY_TIME, EV_KEY, BTN_MOUSE, 1); |
| args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); |
| EXPECT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(ACTION_MOVE), WithPressure(0.0f), |
| WithPositiveAxis(AXIS_X), WithNegativeAxis(AXIS_Y))), |
| VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(ACTION_DOWN), WithPressure(1.0f), |
| WithZeroAxis(AXIS_X), WithZeroAxis(AXIS_Y))), |
| VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(BUTTON_PRESS), WithPressure(1.0f), |
| WithZeroAxis(AXIS_X), WithZeroAxis(AXIS_Y))))); |
| args.clear(); |
| |
| // Move X, Y a bit while pressed. |
| args += process(ARBITRARY_TIME, EV_REL, REL_X, 2); |
| args += process(ARBITRARY_TIME, EV_REL, REL_Y, 1); |
| args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); |
| EXPECT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(ACTION_MOVE), WithPressure(1.0f), |
| WithPositiveAxis(AXIS_X), WithPositiveAxis(AXIS_Y))))); |
| args.clear(); |
| |
| // Release Button. |
| args += process(ARBITRARY_TIME, EV_KEY, BTN_MOUSE, 0); |
| args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); |
| EXPECT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>(WithMotionAction(BUTTON_RELEASE)), |
| VariantWith<NotifyMotionArgs>(WithMotionAction(ACTION_UP)))); |
| EXPECT_THAT(args, |
| Each(VariantWith<NotifyMotionArgs>( |
| AllOf(WithCoords(0.0f, 0.0f), WithPressure(0.0f))))); |
| args.clear(); |
| } |
| |
| TEST_F(CursorInputMapperUnitTest, ProcessShouldNotRotateMotionsWhenOrientationAware) { |
| // InputReader works in the un-rotated coordinate space, so orientation-aware devices do not |
| // need to be rotated. |
| mPropertyMap.addProperty("cursor.mode", "navigation"); |
| mPropertyMap.addProperty("cursor.orientationAware", "1"); |
| EXPECT_CALL((*mDevice), getAssociatedViewport) |
| .WillRepeatedly(Return(createPrimaryViewport(ui::Rotation::Rotation90))); |
| mMapper = createInputMapper<CursorInputMapper>(*mDeviceContext, mReaderConfiguration); |
| |
| constexpr auto X = AXIS_X; |
| constexpr auto Y = AXIS_Y; |
| ASSERT_NO_FATAL_FAILURE(testRotation( 0, 1, AllOf(WithZeroAxis(X), WithPositiveAxis(Y)))); |
| ASSERT_NO_FATAL_FAILURE(testRotation( 1, 1, AllOf(WithPositiveAxis(X), WithPositiveAxis(Y)))); |
| ASSERT_NO_FATAL_FAILURE(testRotation( 1, 0, AllOf(WithPositiveAxis(X), WithZeroAxis(Y)))); |
| ASSERT_NO_FATAL_FAILURE(testRotation( 1, -1, AllOf(WithPositiveAxis(X), WithNegativeAxis(Y)))); |
| ASSERT_NO_FATAL_FAILURE(testRotation( 0, -1, AllOf(WithZeroAxis(X), WithNegativeAxis(Y)))); |
| ASSERT_NO_FATAL_FAILURE(testRotation(-1, -1, AllOf(WithNegativeAxis(X), WithNegativeAxis(Y)))); |
| ASSERT_NO_FATAL_FAILURE(testRotation(-1, 0, AllOf(WithNegativeAxis(X), WithZeroAxis(Y)))); |
| ASSERT_NO_FATAL_FAILURE(testRotation(-1, 1, AllOf(WithNegativeAxis(X), WithPositiveAxis(Y)))); |
| } |
| |
| TEST_F(CursorInputMapperUnitTest, ProcessShouldRotateMotionsWhenNotOrientationAware) { |
| // Since InputReader works in the un-rotated coordinate space, only devices that are not |
| // orientation-aware are affected by display rotation. |
| mPropertyMap.addProperty("cursor.mode", "navigation"); |
| EXPECT_CALL((*mDevice), getAssociatedViewport) |
| .WillRepeatedly(Return(createPrimaryViewport(ui::Rotation::Rotation0))); |
| mMapper = createInputMapper<CursorInputMapper>(*mDeviceContext, mReaderConfiguration); |
| |
| constexpr auto X = AXIS_X; |
| constexpr auto Y = AXIS_Y; |
| ASSERT_NO_FATAL_FAILURE(testRotation( 0, 1, AllOf(WithZeroAxis(X), WithPositiveAxis(Y)))); |
| ASSERT_NO_FATAL_FAILURE(testRotation( 1, 1, AllOf(WithPositiveAxis(X), WithPositiveAxis(Y)))); |
| ASSERT_NO_FATAL_FAILURE(testRotation( 1, 0, AllOf(WithPositiveAxis(X), WithZeroAxis(Y)))); |
| ASSERT_NO_FATAL_FAILURE(testRotation( 1, -1, AllOf(WithPositiveAxis(X), WithNegativeAxis(Y)))); |
| ASSERT_NO_FATAL_FAILURE(testRotation( 0, -1, AllOf(WithZeroAxis(X), WithNegativeAxis(Y)))); |
| ASSERT_NO_FATAL_FAILURE(testRotation(-1, -1, AllOf(WithNegativeAxis(X), WithNegativeAxis(Y)))); |
| ASSERT_NO_FATAL_FAILURE(testRotation(-1, 0, AllOf(WithNegativeAxis(X), WithZeroAxis(Y)))); |
| ASSERT_NO_FATAL_FAILURE(testRotation(-1, 1, AllOf(WithNegativeAxis(X), WithPositiveAxis(Y)))); |
| |
| EXPECT_CALL((*mDevice), getAssociatedViewport) |
| .WillRepeatedly(Return(createPrimaryViewport(ui::Rotation::Rotation90))); |
| std::list<NotifyArgs> args = |
| mMapper->reconfigure(ARBITRARY_TIME, mReaderConfiguration, |
| InputReaderConfiguration::Change::DISPLAY_INFO); |
| ASSERT_NO_FATAL_FAILURE(testRotation( 0, 1, AllOf(WithNegativeAxis(X), WithZeroAxis(Y)))); |
| ASSERT_NO_FATAL_FAILURE(testRotation( 1, 1, AllOf(WithNegativeAxis(X), WithPositiveAxis(Y)))); |
| ASSERT_NO_FATAL_FAILURE(testRotation( 1, 0, AllOf(WithZeroAxis(X), WithPositiveAxis(Y)))); |
| ASSERT_NO_FATAL_FAILURE(testRotation( 1, -1, AllOf(WithPositiveAxis(X), WithPositiveAxis(Y)))); |
| ASSERT_NO_FATAL_FAILURE(testRotation( 0, -1, AllOf(WithPositiveAxis(X), WithZeroAxis(Y)))); |
| ASSERT_NO_FATAL_FAILURE(testRotation(-1, -1, AllOf(WithPositiveAxis(X), WithNegativeAxis(Y)))); |
| ASSERT_NO_FATAL_FAILURE(testRotation(-1, 0, AllOf(WithZeroAxis(X), WithNegativeAxis(Y)))); |
| ASSERT_NO_FATAL_FAILURE(testRotation(-1, 1, AllOf(WithNegativeAxis(X), WithNegativeAxis(Y)))); |
| |
| EXPECT_CALL((*mDevice), getAssociatedViewport) |
| .WillRepeatedly(Return(createPrimaryViewport(ui::Rotation::Rotation180))); |
| args = mMapper->reconfigure(ARBITRARY_TIME, mReaderConfiguration, |
| InputReaderConfiguration::Change::DISPLAY_INFO); |
| ASSERT_NO_FATAL_FAILURE(testRotation( 0, 1, AllOf(WithZeroAxis(X), WithNegativeAxis(Y)))); |
| ASSERT_NO_FATAL_FAILURE(testRotation( 1, 1, AllOf(WithNegativeAxis(X), WithNegativeAxis(Y)))); |
| ASSERT_NO_FATAL_FAILURE(testRotation( 1, 0, AllOf(WithNegativeAxis(X), WithZeroAxis(Y)))); |
| ASSERT_NO_FATAL_FAILURE(testRotation( 1, -1, AllOf(WithNegativeAxis(X), WithPositiveAxis(Y)))); |
| ASSERT_NO_FATAL_FAILURE(testRotation( 0, -1, AllOf(WithZeroAxis(X), WithPositiveAxis(Y)))); |
| ASSERT_NO_FATAL_FAILURE(testRotation(-1, -1, AllOf(WithPositiveAxis(X), WithPositiveAxis(Y)))); |
| ASSERT_NO_FATAL_FAILURE(testRotation(-1, 0, AllOf(WithPositiveAxis(X), WithZeroAxis(Y)))); |
| ASSERT_NO_FATAL_FAILURE(testRotation(-1, 1, AllOf(WithPositiveAxis(X), WithNegativeAxis(Y)))); |
| |
| EXPECT_CALL((*mDevice), getAssociatedViewport) |
| .WillRepeatedly(Return(createPrimaryViewport(ui::Rotation::Rotation270))); |
| args = mMapper->reconfigure(ARBITRARY_TIME, mReaderConfiguration, |
| InputReaderConfiguration::Change::DISPLAY_INFO); |
| ASSERT_NO_FATAL_FAILURE(testRotation( 0, 1, AllOf(WithPositiveAxis(X), WithZeroAxis(Y)))); |
| ASSERT_NO_FATAL_FAILURE(testRotation( 1, 1, AllOf(WithPositiveAxis(X), WithNegativeAxis(Y)))); |
| ASSERT_NO_FATAL_FAILURE(testRotation( 1, 0, AllOf(WithZeroAxis(X), WithNegativeAxis(Y)))); |
| ASSERT_NO_FATAL_FAILURE(testRotation( 1, -1, AllOf(WithNegativeAxis(X), WithNegativeAxis(Y)))); |
| ASSERT_NO_FATAL_FAILURE(testRotation( 0, -1, AllOf(WithNegativeAxis(X), WithZeroAxis(Y)))); |
| ASSERT_NO_FATAL_FAILURE(testRotation(-1, -1, AllOf(WithNegativeAxis(X), WithPositiveAxis(Y)))); |
| ASSERT_NO_FATAL_FAILURE(testRotation(-1, 0, AllOf(WithZeroAxis(X), WithPositiveAxis(Y)))); |
| ASSERT_NO_FATAL_FAILURE(testRotation(-1, 1, AllOf(WithPositiveAxis(X), WithPositiveAxis(Y)))); |
| } |
| |
| TEST_F(CursorInputMapperUnitTest, PopulateDeviceInfoReturnsRangeFromPolicy) { |
| mPropertyMap.addProperty("cursor.mode", "pointer"); |
| mFakePolicy->clearViewports(); |
| createMapper(); |
| |
| InputDeviceInfo info; |
| mMapper->populateDeviceInfo(info); |
| |
| // Initially there should not be a valid motion range because there's no viewport or pointer |
| // bounds. |
| ASSERT_EQ(nullptr, info.getMotionRange(AINPUT_MOTION_RANGE_X, AINPUT_SOURCE_MOUSE)); |
| ASSERT_EQ(nullptr, info.getMotionRange(AINPUT_MOTION_RANGE_Y, AINPUT_SOURCE_MOUSE)); |
| ASSERT_NO_FATAL_FAILURE(assertMotionRange(info, AINPUT_MOTION_RANGE_PRESSURE, |
| AINPUT_SOURCE_MOUSE, 0.0f, 1.0f, 0.0f, 0.0f)); |
| |
| // When the viewport and the default pointer display ID is set, then there should be a valid |
| // motion range. |
| mFakePolicy->setDefaultPointerDisplayId(DISPLAY_ID); |
| mFakePolicy->addDisplayViewport(createPrimaryViewport(ui::Rotation::Rotation0)); |
| std::list<NotifyArgs> args = |
| mMapper->reconfigure(systemTime(), mReaderConfiguration, |
| InputReaderConfiguration::Change::DISPLAY_INFO); |
| ASSERT_THAT(args, testing::IsEmpty()); |
| |
| InputDeviceInfo info2; |
| mMapper->populateDeviceInfo(info2); |
| |
| ASSERT_NO_FATAL_FAILURE(assertMotionRange(info2, AINPUT_MOTION_RANGE_X, AINPUT_SOURCE_MOUSE, 0, |
| DISPLAY_WIDTH - 1, 0.0f, 0.0f)); |
| ASSERT_NO_FATAL_FAILURE(assertMotionRange(info2, AINPUT_MOTION_RANGE_Y, AINPUT_SOURCE_MOUSE, 0, |
| DISPLAY_HEIGHT - 1, 0.0f, 0.0f)); |
| ASSERT_NO_FATAL_FAILURE(assertMotionRange(info2, AINPUT_MOTION_RANGE_PRESSURE, |
| AINPUT_SOURCE_MOUSE, 0.0f, 1.0f, 0.0f, 0.0f)); |
| } |
| |
| TEST_F(CursorInputMapperUnitTest, ConfigureDisplayIdWithAssociatedViewport) { |
| DisplayViewport primaryViewport = createPrimaryViewport(ui::Rotation::Rotation90); |
| DisplayViewport secondaryViewport = createSecondaryViewport(); |
| mReaderConfiguration.setDisplayViewports({primaryViewport, secondaryViewport}); |
| // Set up the secondary display as the display on which the pointer should be shown. |
| // The InputDevice is not associated with any display. |
| EXPECT_CALL((*mDevice), getAssociatedViewport).WillRepeatedly(Return(secondaryViewport)); |
| mMapper = createInputMapper<CursorInputMapper>(*mDeviceContext, mReaderConfiguration); |
| |
| std::list<NotifyArgs> args; |
| // Ensure input events are generated for the secondary display. |
| args += process(ARBITRARY_TIME, EV_REL, REL_X, 10); |
| args += process(ARBITRARY_TIME, EV_REL, REL_Y, 20); |
| args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); |
| ASSERT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(HOVER_MOVE), WithSource(AINPUT_SOURCE_MOUSE), |
| WithDisplayId(SECONDARY_DISPLAY_ID), WithCoords(0.0f, 0.0f))))); |
| } |
| |
| TEST_F(CursorInputMapperUnitTest, |
| ConfigureDisplayIdShouldGenerateEventForMismatchedPointerDisplay) { |
| DisplayViewport primaryViewport = createPrimaryViewport(ui::Rotation::Rotation90); |
| DisplayViewport secondaryViewport = createSecondaryViewport(); |
| mReaderConfiguration.setDisplayViewports({primaryViewport, secondaryViewport}); |
| // Set up the primary display as the display on which the pointer should be shown. |
| // Associate the InputDevice with the secondary display. |
| EXPECT_CALL((*mDevice), getAssociatedViewport).WillRepeatedly(Return(secondaryViewport)); |
| mMapper = createInputMapper<CursorInputMapper>(*mDeviceContext, mReaderConfiguration); |
| |
| // With PointerChoreographer enabled, there could be a PointerController for the associated |
| // display even if it is different from the pointer display. So the mapper should generate an |
| // event. |
| std::list<NotifyArgs> args; |
| args += process(ARBITRARY_TIME, EV_REL, REL_X, 10); |
| args += process(ARBITRARY_TIME, EV_REL, REL_Y, 20); |
| args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); |
| ASSERT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(HOVER_MOVE), WithSource(AINPUT_SOURCE_MOUSE), |
| WithDisplayId(SECONDARY_DISPLAY_ID), WithCoords(0.0f, 0.0f))))); |
| } |
| |
| TEST_F(CursorInputMapperUnitTest, ProcessShouldHandleAllButtonsWithZeroCoords) { |
| mPropertyMap.addProperty("cursor.mode", "pointer"); |
| createMapper(); |
| |
| std::list<NotifyArgs> args; |
| |
| // press BTN_LEFT, release BTN_LEFT |
| args += process(ARBITRARY_TIME, EV_KEY, BTN_LEFT, 1); |
| args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); |
| EXPECT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>(WithMotionAction(ACTION_DOWN)), |
| VariantWith<NotifyMotionArgs>(WithMotionAction(BUTTON_PRESS)))); |
| EXPECT_THAT(args, |
| Each(VariantWith<NotifyMotionArgs>( |
| AllOf(WithButtonState(AMOTION_EVENT_BUTTON_PRIMARY), WithCoords(0.0f, 0.0f), |
| WithPressure(1.0f))))); |
| args.clear(); |
| args += process(ARBITRARY_TIME, EV_KEY, BTN_LEFT, 0); |
| args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); |
| EXPECT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>(WithMotionAction(BUTTON_RELEASE)), |
| VariantWith<NotifyMotionArgs>(WithMotionAction(ACTION_UP)), |
| VariantWith<NotifyMotionArgs>(WithMotionAction(HOVER_MOVE)))); |
| EXPECT_THAT(args, |
| Each(VariantWith<NotifyMotionArgs>( |
| AllOf(WithButtonState(0), WithCoords(0.0f, 0.0f), WithPressure(0.0f))))); |
| args.clear(); |
| |
| // press BTN_RIGHT + BTN_MIDDLE, release BTN_RIGHT, release BTN_MIDDLE |
| args += process(ARBITRARY_TIME, EV_KEY, BTN_RIGHT, 1); |
| args += process(ARBITRARY_TIME, EV_KEY, BTN_MIDDLE, 1); |
| args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); |
| EXPECT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(ACTION_DOWN), |
| WithButtonState(AMOTION_EVENT_BUTTON_SECONDARY | |
| AMOTION_EVENT_BUTTON_TERTIARY))), |
| VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(BUTTON_PRESS), |
| WithButtonState(AMOTION_EVENT_BUTTON_TERTIARY))), |
| VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(BUTTON_PRESS), |
| WithButtonState(AMOTION_EVENT_BUTTON_SECONDARY | |
| AMOTION_EVENT_BUTTON_TERTIARY))))); |
| EXPECT_THAT(args, |
| Each(VariantWith<NotifyMotionArgs>( |
| AllOf(WithCoords(0.0f, 0.0f), WithPressure(1.0f))))); |
| args.clear(); |
| |
| args += process(ARBITRARY_TIME, EV_KEY, BTN_RIGHT, 0); |
| args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); |
| EXPECT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(BUTTON_RELEASE), |
| WithButtonState(AMOTION_EVENT_BUTTON_TERTIARY), |
| WithCoords(0.0f, 0.0f), WithPressure(1.0f))))); |
| args.clear(); |
| |
| args += process(ARBITRARY_TIME, EV_KEY, BTN_MIDDLE, 0); |
| args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); |
| EXPECT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>(WithMotionAction(BUTTON_RELEASE)), |
| VariantWith<NotifyMotionArgs>(WithMotionAction(ACTION_UP)), |
| VariantWith<NotifyMotionArgs>(WithMotionAction(HOVER_MOVE)))); |
| EXPECT_THAT(args, |
| Each(VariantWith<NotifyMotionArgs>( |
| AllOf(WithButtonState(0), WithCoords(0.0f, 0.0f), WithPressure(0.0f))))); |
| } |
| |
| class CursorInputMapperButtonKeyTest |
| : public CursorInputMapperUnitTest, |
| public testing::WithParamInterface< |
| std::tuple<int32_t /*evdevCode*/, int32_t /*expectedButtonState*/, |
| int32_t /*expectedKeyCode*/>> {}; |
| |
| TEST_P(CursorInputMapperButtonKeyTest, ProcessShouldHandleButtonKeyWithZeroCoords) { |
| auto [evdevCode, expectedButtonState, expectedKeyCode] = GetParam(); |
| mPropertyMap.addProperty("cursor.mode", "pointer"); |
| createMapper(); |
| |
| std::list<NotifyArgs> args; |
| |
| args += process(ARBITRARY_TIME, EV_KEY, evdevCode, 1); |
| args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); |
| EXPECT_THAT(args, |
| ElementsAre(VariantWith<NotifyKeyArgs>(AllOf(WithKeyAction(AKEY_EVENT_ACTION_DOWN), |
| WithKeyCode(expectedKeyCode))), |
| VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(BUTTON_PRESS), |
| WithButtonState(expectedButtonState), |
| WithCoords(0.0f, 0.0f), WithPressure(0.0f))))); |
| args.clear(); |
| |
| args += process(ARBITRARY_TIME, EV_KEY, evdevCode, 0); |
| args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); |
| EXPECT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(BUTTON_RELEASE), WithButtonState(0), |
| WithCoords(0.0f, 0.0f), WithPressure(0.0f))), |
| VariantWith<NotifyKeyArgs>(AllOf(WithKeyAction(AKEY_EVENT_ACTION_UP), |
| WithKeyCode(expectedKeyCode))))); |
| } |
| |
| INSTANTIATE_TEST_SUITE_P( |
| SideExtraBackAndForward, CursorInputMapperButtonKeyTest, |
| testing::Values(std::make_tuple(BTN_SIDE, AMOTION_EVENT_BUTTON_BACK, AKEYCODE_BACK), |
| std::make_tuple(BTN_EXTRA, AMOTION_EVENT_BUTTON_FORWARD, AKEYCODE_FORWARD), |
| std::make_tuple(BTN_BACK, AMOTION_EVENT_BUTTON_BACK, AKEYCODE_BACK), |
| std::make_tuple(BTN_FORWARD, AMOTION_EVENT_BUTTON_FORWARD, |
| AKEYCODE_FORWARD))); |
| |
| TEST_F(CursorInputMapperUnitTest, ProcessWhenModeIsPointerShouldKeepZeroCoords) { |
| mPropertyMap.addProperty("cursor.mode", "pointer"); |
| createMapper(); |
| |
| std::list<NotifyArgs> args; |
| |
| args += process(ARBITRARY_TIME, EV_REL, REL_X, 10); |
| args += process(ARBITRARY_TIME, EV_REL, REL_Y, 20); |
| args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); |
| EXPECT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>( |
| AllOf(WithSource(AINPUT_SOURCE_MOUSE), WithMotionAction(HOVER_MOVE), |
| WithCoords(0.0f, 0.0f), WithPressure(0.0f), WithSize(0.0f), |
| WithTouchDimensions(0.0f, 0.0f), WithToolDimensions(0.0f, 0.0f), |
| WithOrientation(0.0f), WithDistance(0.0f))))); |
| } |
| |
| TEST_F(CursorInputMapperUnitTest, ProcessRegularScroll) { |
| createMapper(); |
| |
| std::list<NotifyArgs> args; |
| args += process(ARBITRARY_TIME, EV_REL, REL_WHEEL, 1); |
| args += process(ARBITRARY_TIME, EV_REL, REL_HWHEEL, 1); |
| args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); |
| |
| EXPECT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>(WithMotionAction(HOVER_MOVE)), |
| VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(AMOTION_EVENT_ACTION_SCROLL), |
| WithScroll(1.0f, 1.0f))))); |
| EXPECT_THAT(args, Each(VariantWith<NotifyMotionArgs>(WithSource(AINPUT_SOURCE_MOUSE)))); |
| } |
| |
| TEST_F(CursorInputMapperUnitTest, ProcessHighResScroll) { |
| vd_flags::high_resolution_scroll(true); |
| EXPECT_CALL(mMockEventHub, hasRelativeAxis(EVENTHUB_ID, REL_WHEEL_HI_RES)) |
| .WillRepeatedly(Return(true)); |
| EXPECT_CALL(mMockEventHub, hasRelativeAxis(EVENTHUB_ID, REL_HWHEEL_HI_RES)) |
| .WillRepeatedly(Return(true)); |
| createMapper(); |
| |
| std::list<NotifyArgs> args; |
| args += process(ARBITRARY_TIME, EV_REL, REL_WHEEL_HI_RES, 60); |
| args += process(ARBITRARY_TIME, EV_REL, REL_HWHEEL_HI_RES, 60); |
| args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); |
| |
| EXPECT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>(WithMotionAction(HOVER_MOVE)), |
| VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(AMOTION_EVENT_ACTION_SCROLL), |
| WithScroll(0.5f, 0.5f))))); |
| EXPECT_THAT(args, Each(VariantWith<NotifyMotionArgs>(WithSource(AINPUT_SOURCE_MOUSE)))); |
| } |
| |
| TEST_F(CursorInputMapperUnitTest, HighResScrollIgnoresRegularScroll) { |
| vd_flags::high_resolution_scroll(true); |
| EXPECT_CALL(mMockEventHub, hasRelativeAxis(EVENTHUB_ID, REL_WHEEL_HI_RES)) |
| .WillRepeatedly(Return(true)); |
| EXPECT_CALL(mMockEventHub, hasRelativeAxis(EVENTHUB_ID, REL_HWHEEL_HI_RES)) |
| .WillRepeatedly(Return(true)); |
| createMapper(); |
| |
| std::list<NotifyArgs> args; |
| args += process(ARBITRARY_TIME, EV_REL, REL_WHEEL_HI_RES, 60); |
| args += process(ARBITRARY_TIME, EV_REL, REL_HWHEEL_HI_RES, 60); |
| args += process(ARBITRARY_TIME, EV_REL, REL_WHEEL, 1); |
| args += process(ARBITRARY_TIME, EV_REL, REL_HWHEEL, 1); |
| args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); |
| |
| EXPECT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>(WithMotionAction(HOVER_MOVE)), |
| VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(AMOTION_EVENT_ACTION_SCROLL), |
| WithScroll(0.5f, 0.5f))))); |
| EXPECT_THAT(args, Each(VariantWith<NotifyMotionArgs>(WithSource(AINPUT_SOURCE_MOUSE)))); |
| } |
| |
| TEST_F(CursorInputMapperUnitTest, ProcessReversedVerticalScroll) { |
| mReaderConfiguration.mouseReverseVerticalScrollingEnabled = true; |
| createMapper(); |
| |
| std::list<NotifyArgs> args; |
| args += process(ARBITRARY_TIME, EV_REL, REL_WHEEL, 1); |
| args += process(ARBITRARY_TIME, EV_REL, REL_HWHEEL, 1); |
| args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); |
| |
| // Reversed vertical scrolling only affects the y-axis, expect it to be -1.0f to indicate the |
| // inverted scroll direction. |
| EXPECT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>(WithMotionAction(HOVER_MOVE)), |
| VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(AMOTION_EVENT_ACTION_SCROLL), |
| WithScroll(1.0f, -1.0f))))); |
| EXPECT_THAT(args, Each(VariantWith<NotifyMotionArgs>(WithSource(AINPUT_SOURCE_MOUSE)))); |
| } |
| |
| TEST_F(CursorInputMapperUnitTest, ProcessHighResReversedVerticalScroll) { |
| mReaderConfiguration.mouseReverseVerticalScrollingEnabled = true; |
| vd_flags::high_resolution_scroll(true); |
| EXPECT_CALL(mMockEventHub, hasRelativeAxis(EVENTHUB_ID, REL_WHEEL_HI_RES)) |
| .WillRepeatedly(Return(true)); |
| EXPECT_CALL(mMockEventHub, hasRelativeAxis(EVENTHUB_ID, REL_HWHEEL_HI_RES)) |
| .WillRepeatedly(Return(true)); |
| createMapper(); |
| |
| std::list<NotifyArgs> args; |
| args += process(ARBITRARY_TIME, EV_REL, REL_WHEEL_HI_RES, 60); |
| args += process(ARBITRARY_TIME, EV_REL, REL_HWHEEL_HI_RES, 60); |
| args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); |
| |
| EXPECT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>(WithMotionAction(HOVER_MOVE)), |
| VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(AMOTION_EVENT_ACTION_SCROLL), |
| WithScroll(0.5f, -0.5f))))); |
| EXPECT_THAT(args, Each(VariantWith<NotifyMotionArgs>(WithSource(AINPUT_SOURCE_MOUSE)))); |
| } |
| |
| /** |
| * When Pointer Capture is enabled, we expect to report unprocessed relative movements, so any |
| * pointer acceleration or speed processing should not be applied. |
| */ |
| TEST_F(CursorInputMapperUnitTest, PointerCaptureDisablesVelocityProcessing) { |
| mPropertyMap.addProperty("cursor.mode", "pointer"); |
| createMapper(); |
| |
| NotifyMotionArgs motionArgs; |
| std::list<NotifyArgs> args; |
| |
| // Move and verify scale is applied. |
| args += process(ARBITRARY_TIME, EV_REL, REL_X, 10); |
| args += process(ARBITRARY_TIME, EV_REL, REL_Y, 20); |
| args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); |
| EXPECT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>( |
| AllOf(WithSource(AINPUT_SOURCE_MOUSE), WithMotionAction(HOVER_MOVE))))); |
| motionArgs = std::get<NotifyMotionArgs>(args.front()); |
| const float relX = motionArgs.pointerCoords[0].getAxisValue(AMOTION_EVENT_AXIS_RELATIVE_X); |
| const float relY = motionArgs.pointerCoords[0].getAxisValue(AMOTION_EVENT_AXIS_RELATIVE_Y); |
| ASSERT_GT(relX, 10); |
| ASSERT_GT(relY, 20); |
| args.clear(); |
| |
| // Enable Pointer Capture |
| setPointerCapture(true); |
| |
| // Move and verify scale is not applied. |
| args += process(ARBITRARY_TIME, EV_REL, REL_X, 10); |
| args += process(ARBITRARY_TIME, EV_REL, REL_Y, 20); |
| args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); |
| EXPECT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>( |
| AllOf(WithSource(AINPUT_SOURCE_MOUSE_RELATIVE), |
| WithMotionAction(ACTION_MOVE), WithRelativeMotion(10, 20))))); |
| } |
| |
| TEST_F(CursorInputMapperUnitTest, ConfigureDisplayIdNoAssociatedViewport) { |
| // Set up the default display. |
| mFakePolicy->clearViewports(); |
| mFakePolicy->addDisplayViewport(createPrimaryViewport(ui::Rotation::Rotation0)); |
| |
| // Set up the secondary display as the display on which the pointer should be shown. |
| // The InputDevice is not associated with any display. |
| mFakePolicy->addDisplayViewport(createSecondaryViewport()); |
| mFakePolicy->setDefaultPointerDisplayId(SECONDARY_DISPLAY_ID); |
| |
| createMapper(); |
| |
| // Ensure input events are generated without display ID or coords, because they will be decided |
| // later by PointerChoreographer. |
| std::list<NotifyArgs> args; |
| args += process(ARBITRARY_TIME, EV_REL, REL_X, 10); |
| args += process(ARBITRARY_TIME, EV_REL, REL_Y, 20); |
| args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); |
| EXPECT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(HOVER_MOVE), WithSource(AINPUT_SOURCE_MOUSE), |
| WithDisplayId(ui::LogicalDisplayId::INVALID), |
| WithCoords(0.0f, 0.0f))))); |
| } |
| |
| TEST_F(CursorInputMapperUnitTest, PointerAccelerationDisabled) { |
| mReaderConfiguration.mousePointerAccelerationEnabled = false; |
| mReaderConfiguration.mousePointerSpeed = 3; |
| mPropertyMap.addProperty("cursor.mode", "pointer"); |
| createMapper(); |
| |
| std::list<NotifyArgs> reconfigureArgs; |
| |
| reconfigureArgs += mMapper->reconfigure(ARBITRARY_TIME, mReaderConfiguration, |
| InputReaderConfiguration::Change::POINTER_SPEED); |
| |
| std::vector<AccelerationCurveSegment> curve = |
| createFlatAccelerationCurve(mReaderConfiguration.mousePointerSpeed); |
| double baseGain = curve[0].baseGain; |
| |
| std::list<NotifyArgs> motionArgs; |
| motionArgs += process(ARBITRARY_TIME, EV_REL, REL_X, 10); |
| motionArgs += process(ARBITRARY_TIME, EV_REL, REL_Y, 20); |
| motionArgs += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); |
| |
| const float expectedRelX = 10 * baseGain; |
| const float expectedRelY = 20 * baseGain; |
| ASSERT_THAT(motionArgs, |
| ElementsAre(VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(HOVER_MOVE), |
| WithRelativeMotion(expectedRelX, expectedRelY))))); |
| } |
| |
| TEST_F(CursorInputMapperUnitTest, ConfigureAccelerationWithAssociatedViewport) { |
| mPropertyMap.addProperty("cursor.mode", "pointer"); |
| DisplayViewport primaryViewport = createPrimaryViewport(ui::Rotation::Rotation0); |
| mReaderConfiguration.setDisplayViewports({primaryViewport}); |
| EXPECT_CALL((*mDevice), getAssociatedViewport).WillRepeatedly(Return(primaryViewport)); |
| mMapper = createInputMapper<CursorInputMapper>(*mDeviceContext, mReaderConfiguration); |
| |
| std::list<NotifyArgs> args; |
| |
| // Verify that acceleration is being applied by default by checking that the movement is scaled. |
| args += process(ARBITRARY_TIME, EV_REL, REL_X, 10); |
| args += process(ARBITRARY_TIME, EV_REL, REL_Y, 20); |
| args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); |
| ASSERT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(HOVER_MOVE), WithDisplayId(DISPLAY_ID))))); |
| const auto& coords = get<NotifyMotionArgs>(args.back()).pointerCoords[0]; |
| ASSERT_GT(coords.getAxisValue(AMOTION_EVENT_AXIS_RELATIVE_X), 10.f); |
| ASSERT_GT(coords.getAxisValue(AMOTION_EVENT_AXIS_RELATIVE_Y), 20.f); |
| |
| // Disable acceleration for the display, and verify that acceleration is no longer applied. |
| mReaderConfiguration.displaysWithMouseScalingDisabled.emplace(DISPLAY_ID); |
| args += mMapper->reconfigure(ARBITRARY_TIME, mReaderConfiguration, |
| InputReaderConfiguration::Change::POINTER_SPEED); |
| args.clear(); |
| |
| args += process(ARBITRARY_TIME, EV_REL, REL_X, 10); |
| args += process(ARBITRARY_TIME, EV_REL, REL_Y, 20); |
| args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); |
| ASSERT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>(AllOf(WithMotionAction(HOVER_MOVE), |
| WithDisplayId(DISPLAY_ID), |
| WithRelativeMotion(10, 20))))); |
| } |
| |
| TEST_F(CursorInputMapperUnitTest, ConfigureAccelerationOnDisplayChange) { |
| mPropertyMap.addProperty("cursor.mode", "pointer"); |
| DisplayViewport primaryViewport = createPrimaryViewport(ui::Rotation::Rotation0); |
| mReaderConfiguration.setDisplayViewports({primaryViewport}); |
| // Disable acceleration for the display. |
| mReaderConfiguration.displaysWithMouseScalingDisabled.emplace(DISPLAY_ID); |
| |
| // Don't associate the device with the display yet. |
| EXPECT_CALL((*mDevice), getAssociatedViewport).WillRepeatedly(Return(std::nullopt)); |
| mMapper = createInputMapper<CursorInputMapper>(*mDeviceContext, mReaderConfiguration); |
| |
| std::list<NotifyArgs> args; |
| |
| // Verify that acceleration is being applied by default by checking that the movement is scaled. |
| args += process(ARBITRARY_TIME, EV_REL, REL_X, 10); |
| args += process(ARBITRARY_TIME, EV_REL, REL_Y, 20); |
| args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); |
| ASSERT_THAT(args, ElementsAre(VariantWith<NotifyMotionArgs>(WithMotionAction(HOVER_MOVE)))); |
| const auto& coords = get<NotifyMotionArgs>(args.back()).pointerCoords[0]; |
| ASSERT_GT(coords.getAxisValue(AMOTION_EVENT_AXIS_RELATIVE_X), 10.f); |
| ASSERT_GT(coords.getAxisValue(AMOTION_EVENT_AXIS_RELATIVE_Y), 20.f); |
| |
| // Now associate the device with the display, and verify that acceleration is disabled. |
| EXPECT_CALL((*mDevice), getAssociatedViewport).WillRepeatedly(Return(primaryViewport)); |
| args += mMapper->reconfigure(ARBITRARY_TIME, mReaderConfiguration, |
| InputReaderConfiguration::Change::DISPLAY_INFO); |
| args.clear(); |
| |
| args += process(ARBITRARY_TIME, EV_REL, REL_X, 10); |
| args += process(ARBITRARY_TIME, EV_REL, REL_Y, 20); |
| args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); |
| ASSERT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(HOVER_MOVE), WithDisplayId(DISPLAY_ID), |
| WithRelativeMotion(10, 20))))); |
| } |
| |
| // TODO(b/432649760): DensityDependentCursorUnitTest can be merged with |
| // XYDensityDependentCursorUnitTest when corrosponding flags are fully released |
| class DensityDependentCursorUnitTest : public CursorInputMapperUnitTest { |
| protected: |
| std::unique_ptr<ScopedFlagOverride> mScaleWithDpiFlagOverride; |
| std::unique_ptr<ScopedFlagOverride> mSeparateXYFlagOverride; |
| |
| void SetUp() override { |
| ReadFlagValueFunction read_xy = input_flags::use_separate_xy_dpi_scaling_for_mice; |
| WriteFlagValueFunction write_xy = input_flags::use_separate_xy_dpi_scaling_for_mice; |
| mSeparateXYFlagOverride = std::make_unique<ScopedFlagOverride>(read_xy, write_xy, false); |
| |
| ReadFlagValueFunction read_scale = input_flags::scale_cursor_speed_with_dpi; |
| WriteFlagValueFunction write_scale = input_flags::scale_cursor_speed_with_dpi; |
| mScaleWithDpiFlagOverride = |
| std::make_unique<ScopedFlagOverride>(read_scale, write_scale, true); |
| |
| CursorInputMapperUnitTest::SetUp(); |
| } |
| |
| void createViewport(int32_t densityDpi, float xDpi = ACONFIGURATION_DENSITY_NONE, |
| float yDpi = ACONFIGURATION_DENSITY_NONE) { |
| DisplayViewport viewport = |
| createPrimaryViewport(ui::Rotation::Rotation0, densityDpi, xDpi, yDpi); |
| mReaderConfiguration.setDisplayViewports({viewport}); |
| EXPECT_CALL((*mDevice), getAssociatedViewport).WillRepeatedly(Return(viewport)); |
| } |
| |
| std::list<NotifyArgs> processRelativeMove(int32_t rawRelativeX, int32_t rawRelativeY) { |
| std::list<NotifyArgs> args; |
| args += process(ARBITRARY_TIME, EV_REL, REL_X, rawRelativeX); |
| args += process(ARBITRARY_TIME, EV_REL, REL_Y, rawRelativeY); |
| args += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); |
| return args; |
| } |
| |
| std::tuple<float, float> getBaselineCursorMoves(int32_t rawRelativeX, int32_t rawRelativeY) { |
| // Cursor moves are not scaled for display density ACONFIGURATION_DENSITY_XHIGH, which is |
| // considered baseline. Acceleration will still apply. |
| createViewport(ACONFIGURATION_DENSITY_XHIGH); |
| mMapper = createInputMapper<CursorInputMapper>(*mDeviceContext, mReaderConfiguration); |
| |
| std::list<NotifyArgs> args = processRelativeMove(rawRelativeX, rawRelativeY); |
| auto coords = get<NotifyMotionArgs>(args.back()).pointerCoords[0]; |
| return {coords.getAxisValue(AMOTION_EVENT_AXIS_RELATIVE_X), |
| coords.getAxisValue(AMOTION_EVENT_AXIS_RELATIVE_Y)}; |
| } |
| }; |
| |
| TEST_F(DensityDependentCursorUnitTest, ScalesCursorMoveWithDisplayDensity) { |
| // Use same move values on different density displays, generated events should be scaled |
| // according to the display density. |
| const int32_t rawRelativeX = 10; |
| const int32_t rawRelativeY = 20; |
| const auto [baselineRelativeX, baselineRelativeY] = |
| getBaselineCursorMoves(rawRelativeX, rawRelativeY); |
| |
| createViewport(ACONFIGURATION_DENSITY_XXHIGH); |
| |
| std::list<NotifyArgs> args = |
| mMapper->reconfigure(ARBITRARY_TIME, mReaderConfiguration, |
| InputReaderConfiguration::Change::DISPLAY_INFO); |
| args.clear(); |
| |
| args += processRelativeMove(rawRelativeX, rawRelativeY); |
| float scalingFactor = static_cast<float>(ACONFIGURATION_DENSITY_XXHIGH) / |
| static_cast<float>(ACONFIGURATION_DENSITY_XHIGH); |
| ASSERT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(HOVER_MOVE), |
| WithRelativeMotion(baselineRelativeX * scalingFactor, |
| baselineRelativeY * scalingFactor))))); |
| } |
| |
| TEST_F(DensityDependentCursorUnitTest, FallbackToNoScalingWhenDensityUnavailable) { |
| const int32_t rawRelativeX = 10; |
| const int32_t rawRelativeY = 20; |
| const auto [baselineRelativeX, baselineRelativeY] = |
| getBaselineCursorMoves(rawRelativeX, rawRelativeY); |
| |
| // Viewport without density information should be equivalent to viewport with baseline density. |
| createViewport(ACONFIGURATION_DENSITY_NONE); |
| std::list<NotifyArgs> args = |
| mMapper->reconfigure(ARBITRARY_TIME, mReaderConfiguration, |
| InputReaderConfiguration::Change::DISPLAY_INFO); |
| args.clear(); |
| |
| args += processRelativeMove(rawRelativeX, rawRelativeY); |
| ASSERT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(HOVER_MOVE), |
| WithRelativeMotion(baselineRelativeX, baselineRelativeY))))); |
| } |
| |
| TEST_F(DensityDependentCursorUnitTest, |
| DoesNotScaleCursorMoveWithDisplayDensityWhenMouseScalingDisabled) { |
| // Create a medium density viewport and disable all scaling. |
| mReaderConfiguration.displaysWithMouseScalingDisabled.emplace(DISPLAY_ID); |
| createViewport(ACONFIGURATION_DENSITY_MEDIUM); |
| |
| mMapper = createInputMapper<CursorInputMapper>(*mDeviceContext, mReaderConfiguration); |
| |
| const int32_t rawRelativeX = 10; |
| const int32_t rawRelativeY = 20; |
| std::list<NotifyArgs> args; |
| args += processRelativeMove(rawRelativeX, rawRelativeY); |
| ASSERT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(HOVER_MOVE), |
| WithRelativeMotion(rawRelativeX, rawRelativeY))))); |
| } |
| |
| TEST_F(DensityDependentCursorUnitTest, |
| ResetScaleCursorMoveWithDisplayDensityWhenMouseScalingDisabled) { |
| // Create a medium density viewport. |
| createViewport(ACONFIGURATION_DENSITY_MEDIUM); |
| mMapper = createInputMapper<CursorInputMapper>(*mDeviceContext, mReaderConfiguration); |
| |
| // Disable scaling |
| mReaderConfiguration.displaysWithMouseScalingDisabled.emplace(DISPLAY_ID); |
| std::list<NotifyArgs> args = |
| mMapper->reconfigure(ARBITRARY_TIME, mReaderConfiguration, |
| InputReaderConfiguration::Change::POINTER_SPEED); |
| args.clear(); |
| |
| const int32_t rawRelativeX = 10; |
| const int32_t rawRelativeY = 20; |
| args += processRelativeMove(rawRelativeX, rawRelativeY); |
| ASSERT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(HOVER_MOVE), |
| WithRelativeMotion(rawRelativeX, rawRelativeY))))); |
| } |
| |
| TEST_F(DensityDependentCursorUnitTest, DoesNotScaleCursorMoveWithPointerCaptureEnabled) { |
| // Create a medium density viewport, that should have scaling enabled by default. |
| createViewport(ACONFIGURATION_DENSITY_MEDIUM); |
| mMapper = createInputMapper<CursorInputMapper>(*mDeviceContext, mReaderConfiguration); |
| |
| // Request pointer capture after the mapper has been configured. |
| setPointerCapture(true); |
| |
| // Verify pointer capture has been enabled. |
| const int32_t rawRelativeX = 10; |
| const int32_t rawRelativeY = 20; |
| std::list<NotifyArgs> args; |
| args += processRelativeMove(rawRelativeX, rawRelativeY); |
| ASSERT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(ACTION_MOVE), |
| WithSource(AINPUT_SOURCE_MOUSE_RELATIVE), |
| WithCoords(rawRelativeX, rawRelativeY), |
| WithRelativeMotion(rawRelativeX, rawRelativeY), |
| WithCursorPosition(INVALID_CURSOR_POSITION, |
| INVALID_CURSOR_POSITION))))); |
| } |
| |
| class XYDensityDependentCursorUnitTest : public DensityDependentCursorUnitTest { |
| protected: |
| void SetUp() override { |
| ReadFlagValueFunction read_scale = input_flags::scale_cursor_speed_with_dpi; |
| WriteFlagValueFunction write_scale = input_flags::scale_cursor_speed_with_dpi; |
| mScaleWithDpiFlagOverride = |
| std::make_unique<ScopedFlagOverride>(read_scale, write_scale, true); |
| |
| ReadFlagValueFunction read_xy = input_flags::use_separate_xy_dpi_scaling_for_mice; |
| WriteFlagValueFunction write_xy = input_flags::use_separate_xy_dpi_scaling_for_mice; |
| mSeparateXYFlagOverride = std::make_unique<ScopedFlagOverride>(read_xy, write_xy, true); |
| |
| CursorInputMapperUnitTest::SetUp(); |
| } |
| |
| std::tuple<float, float> getBaselineCursorMoves(int32_t rawRelativeX, int32_t rawRelativeY) { |
| // Cursor moves are not scaled for display density ACONFIGURATION_DENSITY_XHIGH, which is |
| // considered baseline. Acceleration will still apply. |
| createViewport(/*densityDpi=*/ACONFIGURATION_DENSITY_XHIGH, |
| /*xDpi=*/ACONFIGURATION_DENSITY_XHIGH, |
| /*yDpi=*/ACONFIGURATION_DENSITY_XHIGH); |
| mMapper = createInputMapper<CursorInputMapper>(*mDeviceContext, mReaderConfiguration); |
| |
| std::list<NotifyArgs> args = processRelativeMove(rawRelativeX, rawRelativeY); |
| auto coords = get<NotifyMotionArgs>(args.back()).pointerCoords[0]; |
| return {coords.getAxisValue(AMOTION_EVENT_AXIS_RELATIVE_X), |
| coords.getAxisValue(AMOTION_EVENT_AXIS_RELATIVE_Y)}; |
| } |
| }; |
| |
| TEST_F(XYDensityDependentCursorUnitTest, ScalesCursorMoveWithDisplayDensity) { |
| // Use same move values on different density displays, generated events should be scaled |
| // according to the display density. |
| const int32_t rawRelativeX = 10; |
| const int32_t rawRelativeY = 20; |
| const auto [baselineRelativeX, baselineRelativeY] = |
| getBaselineCursorMoves(rawRelativeX, rawRelativeY); |
| |
| // use different dpi values for X and Y direction, overall dpi is usually average of |
| // X/Y values but its ignored for this test. |
| constexpr float xDpi = ACONFIGURATION_DENSITY_XXXHIGH; |
| constexpr float yDpi = ACONFIGURATION_DENSITY_XXHIGH; |
| constexpr int32_t densityDpi = (xDpi + yDpi) / 2.0; |
| createViewport(densityDpi, xDpi, yDpi); |
| |
| mMapper = createInputMapper<CursorInputMapper>(*mDeviceContext, mReaderConfiguration); |
| std::list<NotifyArgs> args = |
| mMapper->reconfigure(ARBITRARY_TIME, mReaderConfiguration, |
| InputReaderConfiguration::Change::DISPLAY_INFO); |
| args.clear(); |
| |
| args += processRelativeMove(rawRelativeX, rawRelativeY); |
| constexpr float xScalingFactor = xDpi / static_cast<float>(ACONFIGURATION_DENSITY_XHIGH); |
| constexpr float yScalingFactor = yDpi / static_cast<float>(ACONFIGURATION_DENSITY_XHIGH); |
| ASSERT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(HOVER_MOVE), |
| WithRelativeMotion(baselineRelativeX * xScalingFactor, |
| baselineRelativeY * yScalingFactor))))); |
| } |
| |
| TEST_F(XYDensityDependentCursorUnitTest, FallbackToNoScalingWhenDensityUnavailable) { |
| const int32_t rawRelativeX = 10; |
| const int32_t rawRelativeY = 20; |
| const auto [baselineRelativeX, baselineRelativeY] = |
| getBaselineCursorMoves(rawRelativeX, rawRelativeY); |
| |
| // Viewport without density information should be equivalent to viewport with baseline density. |
| createViewport(/*densityDpi=*/ACONFIGURATION_DENSITY_NONE, /*xDpi=*/ACONFIGURATION_DENSITY_NONE, |
| /*yDpi=*/ACONFIGURATION_DENSITY_NONE); |
| |
| mMapper = createInputMapper<CursorInputMapper>(*mDeviceContext, mReaderConfiguration); |
| std::list<NotifyArgs> args = |
| mMapper->reconfigure(ARBITRARY_TIME, mReaderConfiguration, |
| InputReaderConfiguration::Change::DISPLAY_INFO); |
| args.clear(); |
| |
| args += processRelativeMove(rawRelativeX, rawRelativeY); |
| ASSERT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(HOVER_MOVE), |
| WithRelativeMotion(baselineRelativeX, baselineRelativeY))))); |
| } |
| |
| TEST_F(XYDensityDependentCursorUnitTest, |
| DoesNotScaleCursorMoveWithDisplayDensityWhenMouseScalingDisabled) { |
| // Create a medium density viewport and disable all scaling. |
| mReaderConfiguration.displaysWithMouseScalingDisabled.emplace(DISPLAY_ID); |
| createViewport(/*densityDpi=*/ACONFIGURATION_DENSITY_MEDIUM, |
| /*xDpi=*/ACONFIGURATION_DENSITY_MEDIUM, /*xDpi=*/ACONFIGURATION_DENSITY_MEDIUM); |
| |
| mMapper = createInputMapper<CursorInputMapper>(*mDeviceContext, mReaderConfiguration); |
| |
| const int32_t rawRelativeX = 10; |
| const int32_t rawRelativeY = 20; |
| std::list<NotifyArgs> args = processRelativeMove(rawRelativeX, rawRelativeY); |
| ASSERT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(HOVER_MOVE), |
| WithRelativeMotion(rawRelativeX, rawRelativeY))))); |
| } |
| |
| TEST_F(XYDensityDependentCursorUnitTest, |
| ResetScaleCursorMoveWithDisplayDensityWhenMouseScalingDisabled) { |
| // Create a medium density viewport. |
| createViewport(/*densityDpi=*/ACONFIGURATION_DENSITY_MEDIUM, |
| /*xDpi=*/ACONFIGURATION_DENSITY_MEDIUM, /*xDpi=*/ACONFIGURATION_DENSITY_MEDIUM); |
| |
| mMapper = createInputMapper<CursorInputMapper>(*mDeviceContext, mReaderConfiguration); |
| |
| std::list<NotifyArgs> args; |
| // Disables scaling |
| mReaderConfiguration.displaysWithMouseScalingDisabled.emplace(DISPLAY_ID); |
| args += mMapper->reconfigure(ARBITRARY_TIME, mReaderConfiguration, |
| InputReaderConfiguration::Change::POINTER_SPEED); |
| args.clear(); |
| |
| const int32_t rawRelativeX = 10; |
| const int32_t rawRelativeY = 20; |
| args += processRelativeMove(rawRelativeX, rawRelativeY); |
| ASSERT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(HOVER_MOVE), |
| WithRelativeMotion(rawRelativeX, rawRelativeY))))); |
| } |
| |
| TEST_F(XYDensityDependentCursorUnitTest, DoesNotScaleCursorMoveWithPointerCaptureEnabled) { |
| // Create a medium density viewport, that should have scaling enabled by default. |
| createViewport(/*densityDpi=*/ACONFIGURATION_DENSITY_MEDIUM, |
| /*xDpi=*/ACONFIGURATION_DENSITY_MEDIUM, /*xDpi=*/ACONFIGURATION_DENSITY_MEDIUM); |
| |
| mMapper = createInputMapper<CursorInputMapper>(*mDeviceContext, mReaderConfiguration); |
| |
| // Request pointer capture after the mapper has been configured. |
| setPointerCapture(true); |
| |
| // Verify pointer capture has been enabled. |
| const int32_t rawRelativeX = 10; |
| const int32_t rawRelativeY = 20; |
| std::list<NotifyArgs> args; |
| args += processRelativeMove(rawRelativeX, rawRelativeY); |
| ASSERT_THAT(args, |
| ElementsAre(VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(ACTION_MOVE), |
| WithSource(AINPUT_SOURCE_MOUSE_RELATIVE), |
| WithCoords(rawRelativeX, rawRelativeY), |
| WithRelativeMotion(rawRelativeX, rawRelativeY), |
| WithCursorPosition(INVALID_CURSOR_POSITION, |
| INVALID_CURSOR_POSITION))))); |
| } |
| |
| namespace { |
| |
| // Minimum timestamp separation between subsequent input events from a Bluetooth device. |
| constexpr nsecs_t MIN_BLUETOOTH_TIMESTAMP_DELTA = ms2ns(4); |
| // Maximum smoothing time delta so that we don't generate events too far into the future. |
| constexpr nsecs_t MAX_BLUETOOTH_SMOOTHING_DELTA = ms2ns(32); |
| |
| } // namespace |
| |
| // --- BluetoothCursorInputMapperUnitTest --- |
| |
| class BluetoothCursorInputMapperUnitTest : public CursorInputMapperUnitTestBase { |
| protected: |
| void SetUp() override { |
| CursorInputMapperUnitTestBase::SetUp(BUS_BLUETOOTH, /*isExternal=*/true); |
| } |
| }; |
| |
| TEST_F(BluetoothCursorInputMapperUnitTest, TimestampSmoothening) { |
| mPropertyMap.addProperty("cursor.mode", "pointer"); |
| createMapper(); |
| std::list<NotifyArgs> argsList; |
| |
| nsecs_t kernelEventTime = ARBITRARY_TIME; |
| nsecs_t expectedEventTime = ARBITRARY_TIME; |
| argsList += process(kernelEventTime, EV_REL, REL_X, 1); |
| argsList += process(kernelEventTime, EV_SYN, SYN_REPORT, 0); |
| EXPECT_THAT(argsList, |
| ElementsAre(VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(HOVER_MOVE), WithEventTime(expectedEventTime))))); |
| argsList.clear(); |
| |
| // Process several events that come in quick succession, according to their timestamps. |
| for (int i = 0; i < 3; i++) { |
| constexpr static nsecs_t delta = ms2ns(1); |
| static_assert(delta < MIN_BLUETOOTH_TIMESTAMP_DELTA); |
| kernelEventTime += delta; |
| expectedEventTime += MIN_BLUETOOTH_TIMESTAMP_DELTA; |
| |
| argsList += process(kernelEventTime, EV_REL, REL_X, 1); |
| argsList += process(kernelEventTime, EV_SYN, SYN_REPORT, 0); |
| EXPECT_THAT(argsList, |
| ElementsAre(VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(HOVER_MOVE), |
| WithEventTime(expectedEventTime))))); |
| argsList.clear(); |
| } |
| } |
| |
| TEST_F(BluetoothCursorInputMapperUnitTest, TimestampSmootheningIsCapped) { |
| mPropertyMap.addProperty("cursor.mode", "pointer"); |
| createMapper(); |
| std::list<NotifyArgs> argsList; |
| |
| nsecs_t expectedEventTime = ARBITRARY_TIME; |
| argsList += process(ARBITRARY_TIME, EV_REL, REL_X, 1); |
| argsList += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); |
| EXPECT_THAT(argsList, |
| ElementsAre(VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(HOVER_MOVE), WithEventTime(expectedEventTime))))); |
| argsList.clear(); |
| |
| // Process several events with the same timestamp from the kernel. |
| // Ensure that we do not generate events too far into the future. |
| constexpr static int32_t numEvents = |
| MAX_BLUETOOTH_SMOOTHING_DELTA / MIN_BLUETOOTH_TIMESTAMP_DELTA; |
| for (int i = 0; i < numEvents; i++) { |
| expectedEventTime += MIN_BLUETOOTH_TIMESTAMP_DELTA; |
| |
| argsList += process(ARBITRARY_TIME, EV_REL, REL_X, 1); |
| argsList += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); |
| EXPECT_THAT(argsList, |
| ElementsAre(VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(HOVER_MOVE), |
| WithEventTime(expectedEventTime))))); |
| argsList.clear(); |
| } |
| |
| // By processing more events with the same timestamp, we should not generate events with a |
| // timestamp that is more than the specified max time delta from the timestamp at its injection. |
| const nsecs_t cappedEventTime = ARBITRARY_TIME + MAX_BLUETOOTH_SMOOTHING_DELTA; |
| for (int i = 0; i < 3; i++) { |
| argsList += process(ARBITRARY_TIME, EV_REL, REL_X, 1); |
| argsList += process(ARBITRARY_TIME, EV_SYN, SYN_REPORT, 0); |
| EXPECT_THAT(argsList, |
| ElementsAre(VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(HOVER_MOVE), WithEventTime(cappedEventTime))))); |
| argsList.clear(); |
| } |
| } |
| |
| TEST_F(BluetoothCursorInputMapperUnitTest, TimestampSmootheningNotUsed) { |
| mPropertyMap.addProperty("cursor.mode", "pointer"); |
| createMapper(); |
| std::list<NotifyArgs> argsList; |
| |
| nsecs_t kernelEventTime = ARBITRARY_TIME; |
| nsecs_t expectedEventTime = ARBITRARY_TIME; |
| argsList += process(kernelEventTime, EV_REL, REL_X, 1); |
| argsList += process(kernelEventTime, EV_SYN, SYN_REPORT, 0); |
| EXPECT_THAT(argsList, |
| ElementsAre(VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(HOVER_MOVE), WithEventTime(expectedEventTime))))); |
| argsList.clear(); |
| |
| // If the next event has a timestamp that is sufficiently spaced out so that Bluetooth timestamp |
| // smoothening is not needed, its timestamp is not affected. |
| kernelEventTime += MAX_BLUETOOTH_SMOOTHING_DELTA + ms2ns(1); |
| expectedEventTime = kernelEventTime; |
| |
| argsList += process(kernelEventTime, EV_REL, REL_X, 1); |
| argsList += process(kernelEventTime, EV_SYN, SYN_REPORT, 0); |
| EXPECT_THAT(argsList, |
| ElementsAre(VariantWith<NotifyMotionArgs>( |
| AllOf(WithMotionAction(HOVER_MOVE), WithEventTime(expectedEventTime))))); |
| argsList.clear(); |
| } |
| |
| } // namespace android |
