| /* | |
| * Copyright 2015 The Android Open Source Project | |
| * | |
| * Licensed under the Apache License, Version 2.0 (the "License"); | |
| * you may not use this file except in compliance with the License. | |
| * You may obtain a copy of the License at | |
| * | |
| * http://www.apache.org/licenses/LICENSE-2.0 | |
| * | |
| * Unless required by applicable law or agreed to in writing, software | |
| * distributed under the License is distributed on an "AS IS" BASIS, | |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| * See the License for the specific language governing permissions and | |
| * limitations under the License. | |
| */ | |
| #include "vulkan/vulkan_core.h" | |
| #define ATRACE_TAG ATRACE_TAG_GRAPHICS | |
| #include <aidl/android/hardware/graphics/common/Dataspace.h> | |
| #include <aidl/android/hardware/graphics/common/PixelFormat.h> | |
| #include <android/hardware/graphics/common/1.0/types.h> | |
| #include <android/hardware_buffer.h> | |
| #include <grallocusage/GrallocUsageConversion.h> | |
| #include <graphicsenv/GraphicsEnv.h> | |
| #include <hardware/gralloc.h> | |
| #include <hardware/gralloc1.h> | |
| #include <log/log.h> | |
| #include <sync/sync.h> | |
| #include <system/window.h> | |
| #include <ui/BufferQueueDefs.h> | |
| #include <utils/StrongPointer.h> | |
| #include <utils/Timers.h> | |
| #include <utils/Trace.h> | |
| #include <algorithm> | |
| #include <unordered_set> | |
| #include <vector> | |
| #include "driver.h" | |
| using PixelFormat = aidl::android::hardware::graphics::common::PixelFormat; | |
| using DataSpace = aidl::android::hardware::graphics::common::Dataspace; | |
| using android::hardware::graphics::common::V1_0::BufferUsage; | |
| namespace vulkan { | |
| namespace driver { | |
| namespace { | |
| static uint64_t convertGralloc1ToBufferUsage(uint64_t producerUsage, | |
| uint64_t consumerUsage) { | |
| static_assert(uint64_t(GRALLOC1_CONSUMER_USAGE_CPU_READ_OFTEN) == | |
| uint64_t(GRALLOC1_PRODUCER_USAGE_CPU_READ_OFTEN), | |
| "expected ConsumerUsage and ProducerUsage CPU_READ_OFTEN " | |
| "bits to match"); | |
| uint64_t merged = producerUsage | consumerUsage; | |
| if ((merged & (GRALLOC1_CONSUMER_USAGE_CPU_READ_OFTEN)) == | |
| GRALLOC1_CONSUMER_USAGE_CPU_READ_OFTEN) { | |
| merged &= ~uint64_t(GRALLOC1_CONSUMER_USAGE_CPU_READ_OFTEN); | |
| merged |= BufferUsage::CPU_READ_OFTEN; | |
| } | |
| if ((merged & (GRALLOC1_PRODUCER_USAGE_CPU_WRITE_OFTEN)) == | |
| GRALLOC1_PRODUCER_USAGE_CPU_WRITE_OFTEN) { | |
| merged &= ~uint64_t(GRALLOC1_PRODUCER_USAGE_CPU_WRITE_OFTEN); | |
| merged |= BufferUsage::CPU_WRITE_OFTEN; | |
| } | |
| return merged; | |
| } | |
| const VkSurfaceTransformFlagsKHR kSupportedTransforms = | |
| VK_SURFACE_TRANSFORM_IDENTITY_BIT_KHR | | |
| VK_SURFACE_TRANSFORM_ROTATE_90_BIT_KHR | | |
| VK_SURFACE_TRANSFORM_ROTATE_180_BIT_KHR | | |
| VK_SURFACE_TRANSFORM_ROTATE_270_BIT_KHR | | |
| VK_SURFACE_TRANSFORM_HORIZONTAL_MIRROR_BIT_KHR | | |
| VK_SURFACE_TRANSFORM_HORIZONTAL_MIRROR_ROTATE_90_BIT_KHR | | |
| VK_SURFACE_TRANSFORM_HORIZONTAL_MIRROR_ROTATE_180_BIT_KHR | | |
| VK_SURFACE_TRANSFORM_HORIZONTAL_MIRROR_ROTATE_270_BIT_KHR | | |
| VK_SURFACE_TRANSFORM_INHERIT_BIT_KHR; | |
| VkSurfaceTransformFlagBitsKHR TranslateNativeToVulkanTransform(int native) { | |
| // Native and Vulkan transforms are isomorphic, but are represented | |
| // differently. Vulkan transforms are built up of an optional horizontal | |
| // mirror, followed by a clockwise 0/90/180/270-degree rotation. Native | |
| // transforms are built up from a horizontal flip, vertical flip, and | |
| // 90-degree rotation, all optional but always in that order. | |
| switch (native) { | |
| case 0: | |
| return VK_SURFACE_TRANSFORM_IDENTITY_BIT_KHR; | |
| case NATIVE_WINDOW_TRANSFORM_FLIP_H: | |
| return VK_SURFACE_TRANSFORM_HORIZONTAL_MIRROR_BIT_KHR; | |
| case NATIVE_WINDOW_TRANSFORM_FLIP_V: | |
| return VK_SURFACE_TRANSFORM_HORIZONTAL_MIRROR_ROTATE_180_BIT_KHR; | |
| case NATIVE_WINDOW_TRANSFORM_ROT_180: | |
| return VK_SURFACE_TRANSFORM_ROTATE_180_BIT_KHR; | |
| case NATIVE_WINDOW_TRANSFORM_ROT_90: | |
| return VK_SURFACE_TRANSFORM_ROTATE_90_BIT_KHR; | |
| case NATIVE_WINDOW_TRANSFORM_FLIP_H | NATIVE_WINDOW_TRANSFORM_ROT_90: | |
| return VK_SURFACE_TRANSFORM_HORIZONTAL_MIRROR_ROTATE_90_BIT_KHR; | |
| case NATIVE_WINDOW_TRANSFORM_FLIP_V | NATIVE_WINDOW_TRANSFORM_ROT_90: | |
| return VK_SURFACE_TRANSFORM_HORIZONTAL_MIRROR_ROTATE_270_BIT_KHR; | |
| case NATIVE_WINDOW_TRANSFORM_ROT_270: | |
| return VK_SURFACE_TRANSFORM_ROTATE_270_BIT_KHR; | |
| case NATIVE_WINDOW_TRANSFORM_INVERSE_DISPLAY: | |
| default: | |
| return VK_SURFACE_TRANSFORM_IDENTITY_BIT_KHR; | |
| } | |
| } | |
| int TranslateVulkanToNativeTransform(VkSurfaceTransformFlagBitsKHR transform) { | |
| switch (transform) { | |
| case VK_SURFACE_TRANSFORM_ROTATE_90_BIT_KHR: | |
| return NATIVE_WINDOW_TRANSFORM_ROT_90; | |
| case VK_SURFACE_TRANSFORM_ROTATE_180_BIT_KHR: | |
| return NATIVE_WINDOW_TRANSFORM_ROT_180; | |
| case VK_SURFACE_TRANSFORM_ROTATE_270_BIT_KHR: | |
| return NATIVE_WINDOW_TRANSFORM_ROT_270; | |
| case VK_SURFACE_TRANSFORM_HORIZONTAL_MIRROR_BIT_KHR: | |
| return NATIVE_WINDOW_TRANSFORM_FLIP_H; | |
| case VK_SURFACE_TRANSFORM_HORIZONTAL_MIRROR_ROTATE_90_BIT_KHR: | |
| return NATIVE_WINDOW_TRANSFORM_FLIP_H | | |
| NATIVE_WINDOW_TRANSFORM_ROT_90; | |
| case VK_SURFACE_TRANSFORM_HORIZONTAL_MIRROR_ROTATE_180_BIT_KHR: | |
| return NATIVE_WINDOW_TRANSFORM_FLIP_V; | |
| case VK_SURFACE_TRANSFORM_HORIZONTAL_MIRROR_ROTATE_270_BIT_KHR: | |
| return NATIVE_WINDOW_TRANSFORM_FLIP_V | | |
| NATIVE_WINDOW_TRANSFORM_ROT_90; | |
| case VK_SURFACE_TRANSFORM_IDENTITY_BIT_KHR: | |
| case VK_SURFACE_TRANSFORM_INHERIT_BIT_KHR: | |
| default: | |
| return 0; | |
| } | |
| } | |
| int InvertTransformToNative(VkSurfaceTransformFlagBitsKHR transform) { | |
| switch (transform) { | |
| case VK_SURFACE_TRANSFORM_ROTATE_90_BIT_KHR: | |
| return NATIVE_WINDOW_TRANSFORM_ROT_270; | |
| case VK_SURFACE_TRANSFORM_ROTATE_180_BIT_KHR: | |
| return NATIVE_WINDOW_TRANSFORM_ROT_180; | |
| case VK_SURFACE_TRANSFORM_ROTATE_270_BIT_KHR: | |
| return NATIVE_WINDOW_TRANSFORM_ROT_90; | |
| case VK_SURFACE_TRANSFORM_HORIZONTAL_MIRROR_BIT_KHR: | |
| return NATIVE_WINDOW_TRANSFORM_FLIP_H; | |
| case VK_SURFACE_TRANSFORM_HORIZONTAL_MIRROR_ROTATE_90_BIT_KHR: | |
| return NATIVE_WINDOW_TRANSFORM_FLIP_H | | |
| NATIVE_WINDOW_TRANSFORM_ROT_90; | |
| case VK_SURFACE_TRANSFORM_HORIZONTAL_MIRROR_ROTATE_180_BIT_KHR: | |
| return NATIVE_WINDOW_TRANSFORM_FLIP_V; | |
| case VK_SURFACE_TRANSFORM_HORIZONTAL_MIRROR_ROTATE_270_BIT_KHR: | |
| return NATIVE_WINDOW_TRANSFORM_FLIP_V | | |
| NATIVE_WINDOW_TRANSFORM_ROT_90; | |
| case VK_SURFACE_TRANSFORM_IDENTITY_BIT_KHR: | |
| case VK_SURFACE_TRANSFORM_INHERIT_BIT_KHR: | |
| default: | |
| return 0; | |
| } | |
| } | |
| const static VkColorSpaceKHR colorSpaceSupportedByVkEXTSwapchainColorspace[] = { | |
| VK_COLOR_SPACE_DISPLAY_P3_NONLINEAR_EXT, | |
| VK_COLOR_SPACE_DISPLAY_P3_LINEAR_EXT, | |
| VK_COLOR_SPACE_DCI_P3_NONLINEAR_EXT, | |
| VK_COLOR_SPACE_BT709_LINEAR_EXT, | |
| VK_COLOR_SPACE_BT709_NONLINEAR_EXT, | |
| VK_COLOR_SPACE_BT2020_LINEAR_EXT, | |
| VK_COLOR_SPACE_HDR10_ST2084_EXT, | |
| VK_COLOR_SPACE_HDR10_HLG_EXT, | |
| VK_COLOR_SPACE_ADOBERGB_LINEAR_EXT, | |
| VK_COLOR_SPACE_ADOBERGB_NONLINEAR_EXT, | |
| VK_COLOR_SPACE_PASS_THROUGH_EXT, | |
| VK_COLOR_SPACE_DCI_P3_LINEAR_EXT}; | |
| const static VkColorSpaceKHR | |
| colorSpaceSupportedByVkEXTSwapchainColorspaceOnFP16SurfaceOnly[] = { | |
| VK_COLOR_SPACE_EXTENDED_SRGB_LINEAR_EXT, | |
| VK_COLOR_SPACE_EXTENDED_SRGB_NONLINEAR_EXT}; | |
| class TimingInfo { | |
| public: | |
| TimingInfo(const VkPresentTimeGOOGLE* qp, uint64_t nativeFrameId) | |
| : vals_{qp->presentID, qp->desiredPresentTime, 0, 0, 0}, | |
| native_frame_id_(nativeFrameId) {} | |
| bool ready() const { | |
| return (timestamp_desired_present_time_ != | |
| NATIVE_WINDOW_TIMESTAMP_PENDING && | |
| timestamp_actual_present_time_ != | |
| NATIVE_WINDOW_TIMESTAMP_PENDING && | |
| timestamp_render_complete_time_ != | |
| NATIVE_WINDOW_TIMESTAMP_PENDING && | |
| timestamp_composition_latch_time_ != | |
| NATIVE_WINDOW_TIMESTAMP_PENDING); | |
| } | |
| void calculate(int64_t rdur) { | |
| bool anyTimestampInvalid = | |
| (timestamp_actual_present_time_ == | |
| NATIVE_WINDOW_TIMESTAMP_INVALID) || | |
| (timestamp_render_complete_time_ == | |
| NATIVE_WINDOW_TIMESTAMP_INVALID) || | |
| (timestamp_composition_latch_time_ == | |
| NATIVE_WINDOW_TIMESTAMP_INVALID); | |
| if (anyTimestampInvalid) { | |
| ALOGE("Unexpectedly received invalid timestamp."); | |
| vals_.actualPresentTime = 0; | |
| vals_.earliestPresentTime = 0; | |
| vals_.presentMargin = 0; | |
| return; | |
| } | |
| vals_.actualPresentTime = | |
| static_cast<uint64_t>(timestamp_actual_present_time_); | |
| int64_t margin = (timestamp_composition_latch_time_ - | |
| timestamp_render_complete_time_); | |
| // Calculate vals_.earliestPresentTime, and potentially adjust | |
| // vals_.presentMargin. The initial value of vals_.earliestPresentTime | |
| // is vals_.actualPresentTime. If we can subtract rdur (the duration | |
| // of a refresh cycle) from vals_.earliestPresentTime (and also from | |
| // vals_.presentMargin) and still leave a positive margin, then we can | |
| // report to the application that it could have presented earlier than | |
| // it did (per the extension specification). If for some reason, we | |
| // can do this subtraction repeatedly, we do, since | |
| // vals_.earliestPresentTime really is supposed to be the "earliest". | |
| int64_t early_time = timestamp_actual_present_time_; | |
| while ((margin > rdur) && | |
| ((early_time - rdur) > timestamp_composition_latch_time_)) { | |
| early_time -= rdur; | |
| margin -= rdur; | |
| } | |
| vals_.earliestPresentTime = static_cast<uint64_t>(early_time); | |
| vals_.presentMargin = static_cast<uint64_t>(margin); | |
| } | |
| void get_values(VkPastPresentationTimingGOOGLE* values) const { | |
| *values = vals_; | |
| } | |
| public: | |
| VkPastPresentationTimingGOOGLE vals_ { 0, 0, 0, 0, 0 }; | |
| uint64_t native_frame_id_ { 0 }; | |
| int64_t timestamp_desired_present_time_{ NATIVE_WINDOW_TIMESTAMP_PENDING }; | |
| int64_t timestamp_actual_present_time_ { NATIVE_WINDOW_TIMESTAMP_PENDING }; | |
| int64_t timestamp_render_complete_time_ { NATIVE_WINDOW_TIMESTAMP_PENDING }; | |
| int64_t timestamp_composition_latch_time_ | |
| { NATIVE_WINDOW_TIMESTAMP_PENDING }; | |
| }; | |
| struct Surface { | |
| android::sp<ANativeWindow> window; | |
| VkSwapchainKHR swapchain_handle; | |
| uint64_t consumer_usage; | |
| // Indicate whether this surface has been used by a swapchain, no matter the | |
| // swapchain is still current or has been destroyed. | |
| bool used_by_swapchain; | |
| }; | |
| VkSurfaceKHR HandleFromSurface(Surface* surface) { | |
| return VkSurfaceKHR(reinterpret_cast<uint64_t>(surface)); | |
| } | |
| Surface* SurfaceFromHandle(VkSurfaceKHR handle) { | |
| return reinterpret_cast<Surface*>(handle); | |
| } | |
| // Maximum number of TimingInfo structs to keep per swapchain: | |
| enum { MAX_TIMING_INFOS = 10 }; | |
| // Minimum number of frames to look for in the past (so we don't cause | |
| // syncronous requests to Surface Flinger): | |
| enum { MIN_NUM_FRAMES_AGO = 5 }; | |
| bool IsSharedPresentMode(VkPresentModeKHR mode) { | |
| return mode == VK_PRESENT_MODE_SHARED_DEMAND_REFRESH_KHR || | |
| mode == VK_PRESENT_MODE_SHARED_CONTINUOUS_REFRESH_KHR; | |
| } | |
| struct Swapchain { | |
| Swapchain(Surface& surface_, | |
| uint32_t num_images_, | |
| VkPresentModeKHR present_mode, | |
| int pre_transform_, | |
| int64_t refresh_duration_) | |
| : surface(surface_), | |
| num_images(num_images_), | |
| mailbox_mode(present_mode == VK_PRESENT_MODE_MAILBOX_KHR), | |
| pre_transform(pre_transform_), | |
| frame_timestamps_enabled(false), | |
| refresh_duration(refresh_duration_), | |
| acquire_next_image_timeout(-1), | |
| shared(IsSharedPresentMode(present_mode)) { | |
| } | |
| VkResult get_refresh_duration(uint64_t& outRefreshDuration) | |
| { | |
| ANativeWindow* window = surface.window.get(); | |
| int err = native_window_get_refresh_cycle_duration( | |
| window, | |
| &refresh_duration); | |
| if (err != android::OK) { | |
| ALOGE("%s:native_window_get_refresh_cycle_duration failed: %s (%d)", | |
| __func__, strerror(-err), err ); | |
| return VK_ERROR_SURFACE_LOST_KHR; | |
| } | |
| outRefreshDuration = refresh_duration; | |
| return VK_SUCCESS; | |
| } | |
| Surface& surface; | |
| uint32_t num_images; | |
| bool mailbox_mode; | |
| int pre_transform; | |
| bool frame_timestamps_enabled; | |
| int64_t refresh_duration; | |
| nsecs_t acquire_next_image_timeout; | |
| bool shared; | |
| struct Image { | |
| Image() | |
| : image(VK_NULL_HANDLE), | |
| dequeue_fence(-1), | |
| release_fence(-1), | |
| dequeued(false) {} | |
| VkImage image; | |
| // If the image is bound to memory, an sp to the underlying gralloc buffer. | |
| // Otherwise, nullptr; the image will be bound to memory as part of | |
| // AcquireNextImage. | |
| android::sp<ANativeWindowBuffer> buffer; | |
| // The fence is only valid when the buffer is dequeued, and should be | |
| // -1 any other time. When valid, we own the fd, and must ensure it is | |
| // closed: either by closing it explicitly when queueing the buffer, | |
| // or by passing ownership e.g. to ANativeWindow::cancelBuffer(). | |
| int dequeue_fence; | |
| // This fence is a dup of the sync fd returned from the driver via | |
| // vkQueueSignalReleaseImageANDROID upon vkQueuePresentKHR. We must | |
| // ensure it is closed upon re-presenting or releasing the image. | |
| int release_fence; | |
| bool dequeued; | |
| } images[android::BufferQueueDefs::NUM_BUFFER_SLOTS]; | |
| std::vector<TimingInfo> timing; | |
| }; | |
| VkSwapchainKHR HandleFromSwapchain(Swapchain* swapchain) { | |
| return VkSwapchainKHR(reinterpret_cast<uint64_t>(swapchain)); | |
| } | |
| Swapchain* SwapchainFromHandle(VkSwapchainKHR handle) { | |
| return reinterpret_cast<Swapchain*>(handle); | |
| } | |
| static bool IsFencePending(int fd) { | |
| if (fd < 0) | |
| return false; | |
| errno = 0; | |
| return sync_wait(fd, 0 /* timeout */) == -1 && errno == ETIME; | |
| } | |
| void ReleaseSwapchainImage(VkDevice device, | |
| bool shared_present, | |
| ANativeWindow* window, | |
| int release_fence, | |
| Swapchain::Image& image, | |
| bool defer_if_pending) { | |
| ATRACE_CALL(); | |
| ALOG_ASSERT(release_fence == -1 || image.dequeued, | |
| "ReleaseSwapchainImage: can't provide a release fence for " | |
| "non-dequeued images"); | |
| if (image.dequeued) { | |
| if (release_fence >= 0) { | |
| // We get here from vkQueuePresentKHR. The application is | |
| // responsible for creating an execution dependency chain from | |
| // vkAcquireNextImage (dequeue_fence) to vkQueuePresentKHR | |
| // (release_fence), so we can drop the dequeue_fence here. | |
| if (image.dequeue_fence >= 0) | |
| close(image.dequeue_fence); | |
| } else { | |
| // We get here during swapchain destruction, or various serious | |
| // error cases e.g. when we can't create the release_fence during | |
| // vkQueuePresentKHR. In non-error cases, the dequeue_fence should | |
| // have already signalled, since the swapchain images are supposed | |
| // to be idle before the swapchain is destroyed. In error cases, | |
| // there may be rendering in flight to the image, but since we | |
| // weren't able to create a release_fence, waiting for the | |
| // dequeue_fence is about the best we can do. | |
| release_fence = image.dequeue_fence; | |
| } | |
| image.dequeue_fence = -1; | |
| // It's invalid to call cancelBuffer on a shared buffer | |
| if (window && !shared_present) { | |
| window->cancelBuffer(window, image.buffer.get(), release_fence); | |
| } else { | |
| if (release_fence >= 0) { | |
| sync_wait(release_fence, -1 /* forever */); | |
| close(release_fence); | |
| } | |
| } | |
| release_fence = -1; | |
| image.dequeued = false; | |
| } | |
| if (defer_if_pending && IsFencePending(image.release_fence)) | |
| return; | |
| if (image.release_fence >= 0) { | |
| close(image.release_fence); | |
| image.release_fence = -1; | |
| } | |
| if (image.image) { | |
| ATRACE_BEGIN("DestroyImage"); | |
| GetData(device).driver.DestroyImage(device, image.image, nullptr); | |
| ATRACE_END(); | |
| image.image = VK_NULL_HANDLE; | |
| } | |
| image.buffer.clear(); | |
| } | |
| void OrphanSwapchain(VkDevice device, Swapchain* swapchain) { | |
| if (swapchain->surface.swapchain_handle != HandleFromSwapchain(swapchain)) | |
| return; | |
| for (uint32_t i = 0; i < swapchain->num_images; i++) { | |
| if (!swapchain->images[i].dequeued) { | |
| ReleaseSwapchainImage(device, swapchain->shared, nullptr, -1, | |
| swapchain->images[i], true); | |
| } | |
| } | |
| swapchain->surface.swapchain_handle = VK_NULL_HANDLE; | |
| swapchain->timing.clear(); | |
| } | |
| uint32_t get_num_ready_timings(Swapchain& swapchain) { | |
| if (swapchain.timing.size() < MIN_NUM_FRAMES_AGO) { | |
| return 0; | |
| } | |
| uint32_t num_ready = 0; | |
| const size_t num_timings = swapchain.timing.size() - MIN_NUM_FRAMES_AGO + 1; | |
| for (uint32_t i = 0; i < num_timings; i++) { | |
| TimingInfo& ti = swapchain.timing[i]; | |
| if (ti.ready()) { | |
| // This TimingInfo is ready to be reported to the user. Add it | |
| // to the num_ready. | |
| num_ready++; | |
| continue; | |
| } | |
| // This TimingInfo is not yet ready to be reported to the user, | |
| // and so we should look for any available timestamps that | |
| // might make it ready. | |
| int64_t desired_present_time = 0; | |
| int64_t render_complete_time = 0; | |
| int64_t composition_latch_time = 0; | |
| int64_t actual_present_time = 0; | |
| // Obtain timestamps: | |
| int err = native_window_get_frame_timestamps( | |
| swapchain.surface.window.get(), ti.native_frame_id_, | |
| &desired_present_time, &render_complete_time, | |
| &composition_latch_time, | |
| nullptr, //&first_composition_start_time, | |
| nullptr, //&last_composition_start_time, | |
| nullptr, //&composition_finish_time, | |
| &actual_present_time, | |
| nullptr, //&dequeue_ready_time, | |
| nullptr /*&reads_done_time*/); | |
| if (err != android::OK) { | |
| continue; | |
| } | |
| // Record the timestamp(s) we received, and then see if this TimingInfo | |
| // is ready to be reported to the user: | |
| ti.timestamp_desired_present_time_ = desired_present_time; | |
| ti.timestamp_actual_present_time_ = actual_present_time; | |
| ti.timestamp_render_complete_time_ = render_complete_time; | |
| ti.timestamp_composition_latch_time_ = composition_latch_time; | |
| if (ti.ready()) { | |
| // The TimingInfo has received enough timestamps, and should now | |
| // use those timestamps to calculate the info that should be | |
| // reported to the user: | |
| ti.calculate(swapchain.refresh_duration); | |
| num_ready++; | |
| } | |
| } | |
| return num_ready; | |
| } | |
| void copy_ready_timings(Swapchain& swapchain, | |
| uint32_t* count, | |
| VkPastPresentationTimingGOOGLE* timings) { | |
| if (swapchain.timing.empty()) { | |
| *count = 0; | |
| return; | |
| } | |
| size_t last_ready = swapchain.timing.size() - 1; | |
| while (!swapchain.timing[last_ready].ready()) { | |
| if (last_ready == 0) { | |
| *count = 0; | |
| return; | |
| } | |
| last_ready--; | |
| } | |
| uint32_t num_copied = 0; | |
| int32_t num_to_remove = 0; | |
| for (uint32_t i = 0; i <= last_ready && num_copied < *count; i++) { | |
| const TimingInfo& ti = swapchain.timing[i]; | |
| if (ti.ready()) { | |
| ti.get_values(&timings[num_copied]); | |
| num_copied++; | |
| } | |
| num_to_remove++; | |
| } | |
| // Discard old frames that aren't ready if newer frames are ready. | |
| // We don't expect to get the timing info for those old frames. | |
| swapchain.timing.erase(swapchain.timing.begin(), | |
| swapchain.timing.begin() + num_to_remove); | |
| *count = num_copied; | |
| } | |
| PixelFormat GetNativePixelFormat(VkFormat format) { | |
| PixelFormat native_format = PixelFormat::RGBA_8888; | |
| switch (format) { | |
| case VK_FORMAT_R8G8B8A8_UNORM: | |
| case VK_FORMAT_R8G8B8A8_SRGB: | |
| native_format = PixelFormat::RGBA_8888; | |
| break; | |
| case VK_FORMAT_R5G6B5_UNORM_PACK16: | |
| native_format = PixelFormat::RGB_565; | |
| break; | |
| case VK_FORMAT_R16G16B16A16_SFLOAT: | |
| native_format = PixelFormat::RGBA_FP16; | |
| break; | |
| case VK_FORMAT_A2B10G10R10_UNORM_PACK32: | |
| native_format = PixelFormat::RGBA_1010102; | |
| break; | |
| case VK_FORMAT_R8_UNORM: | |
| native_format = PixelFormat::R_8; | |
| break; | |
| case VK_FORMAT_R10X6G10X6B10X6A10X6_UNORM_4PACK16: | |
| native_format = PixelFormat::RGBA_10101010; | |
| break; | |
| default: | |
| ALOGV("unsupported swapchain format %d", format); | |
| break; | |
| } | |
| return native_format; | |
| } | |
| DataSpace GetNativeDataspace(VkColorSpaceKHR colorspace, VkFormat format) { | |
| switch (colorspace) { | |
| case VK_COLOR_SPACE_SRGB_NONLINEAR_KHR: | |
| return DataSpace::SRGB; | |
| case VK_COLOR_SPACE_DISPLAY_P3_NONLINEAR_EXT: | |
| return DataSpace::DISPLAY_P3; | |
| case VK_COLOR_SPACE_EXTENDED_SRGB_LINEAR_EXT: | |
| return DataSpace::SCRGB_LINEAR; | |
| case VK_COLOR_SPACE_EXTENDED_SRGB_NONLINEAR_EXT: | |
| return DataSpace::SCRGB; | |
| case VK_COLOR_SPACE_DCI_P3_LINEAR_EXT: | |
| return DataSpace::DCI_P3_LINEAR; | |
| case VK_COLOR_SPACE_DCI_P3_NONLINEAR_EXT: | |
| return DataSpace::DCI_P3; | |
| case VK_COLOR_SPACE_BT709_LINEAR_EXT: | |
| return DataSpace::SRGB_LINEAR; | |
| case VK_COLOR_SPACE_BT709_NONLINEAR_EXT: | |
| return DataSpace::SRGB; | |
| case VK_COLOR_SPACE_BT2020_LINEAR_EXT: | |
| if (format == VK_FORMAT_R16G16B16A16_SFLOAT) { | |
| return DataSpace::BT2020_LINEAR_EXTENDED; | |
| } else { | |
| return DataSpace::BT2020_LINEAR; | |
| } | |
| case VK_COLOR_SPACE_HDR10_ST2084_EXT: | |
| return DataSpace::BT2020_PQ; | |
| case VK_COLOR_SPACE_DOLBYVISION_EXT: | |
| return DataSpace::BT2020_PQ; | |
| case VK_COLOR_SPACE_HDR10_HLG_EXT: | |
| return DataSpace::BT2020_HLG; | |
| case VK_COLOR_SPACE_ADOBERGB_LINEAR_EXT: | |
| return DataSpace::ADOBE_RGB_LINEAR; | |
| case VK_COLOR_SPACE_ADOBERGB_NONLINEAR_EXT: | |
| return DataSpace::ADOBE_RGB; | |
| // Pass through is intended to allow app to provide data that is passed | |
| // to the display system without modification. | |
| case VK_COLOR_SPACE_PASS_THROUGH_EXT: | |
| return DataSpace::ARBITRARY; | |
| default: | |
| // This indicates that we don't know about the | |
| // dataspace specified and we should indicate that | |
| // it's unsupported | |
| return DataSpace::UNKNOWN; | |
| } | |
| } | |
| } // anonymous namespace | |
| VKAPI_ATTR | |
| VkResult CreateAndroidSurfaceKHR( | |
| VkInstance instance, | |
| const VkAndroidSurfaceCreateInfoKHR* pCreateInfo, | |
| const VkAllocationCallbacks* allocator, | |
| VkSurfaceKHR* out_surface) { | |
| ATRACE_CALL(); | |
| if (!allocator) | |
| allocator = &GetData(instance).allocator; | |
| void* mem = allocator->pfnAllocation(allocator->pUserData, sizeof(Surface), | |
| alignof(Surface), | |
| VK_SYSTEM_ALLOCATION_SCOPE_OBJECT); | |
| if (!mem) | |
| return VK_ERROR_OUT_OF_HOST_MEMORY; | |
| Surface* surface = new (mem) Surface; | |
| surface->window = pCreateInfo->window; | |
| surface->swapchain_handle = VK_NULL_HANDLE; | |
| surface->used_by_swapchain = false; | |
| int err = native_window_get_consumer_usage(surface->window.get(), | |
| &surface->consumer_usage); | |
| if (err != android::OK) { | |
| ALOGE("native_window_get_consumer_usage() failed: %s (%d)", | |
| strerror(-err), err); | |
| surface->~Surface(); | |
| allocator->pfnFree(allocator->pUserData, surface); | |
| return VK_ERROR_SURFACE_LOST_KHR; | |
| } | |
| err = | |
| native_window_api_connect(surface->window.get(), NATIVE_WINDOW_API_EGL); | |
| if (err != android::OK) { | |
| ALOGE("native_window_api_connect() failed: %s (%d)", strerror(-err), | |
| err); | |
| surface->~Surface(); | |
| allocator->pfnFree(allocator->pUserData, surface); | |
| return VK_ERROR_NATIVE_WINDOW_IN_USE_KHR; | |
| } | |
| *out_surface = HandleFromSurface(surface); | |
| return VK_SUCCESS; | |
| } | |
| VKAPI_ATTR | |
| void DestroySurfaceKHR(VkInstance instance, | |
| VkSurfaceKHR surface_handle, | |
| const VkAllocationCallbacks* allocator) { | |
| ATRACE_CALL(); | |
| Surface* surface = SurfaceFromHandle(surface_handle); | |
| if (!surface) | |
| return; | |
| native_window_api_disconnect(surface->window.get(), NATIVE_WINDOW_API_EGL); | |
| ALOGV_IF(surface->swapchain_handle != VK_NULL_HANDLE, | |
| "destroyed VkSurfaceKHR 0x%" PRIx64 | |
| " has active VkSwapchainKHR 0x%" PRIx64, | |
| reinterpret_cast<uint64_t>(surface_handle), | |
| reinterpret_cast<uint64_t>(surface->swapchain_handle)); | |
| surface->~Surface(); | |
| if (!allocator) | |
| allocator = &GetData(instance).allocator; | |
| allocator->pfnFree(allocator->pUserData, surface); | |
| } | |
| VKAPI_ATTR | |
| VkResult GetPhysicalDeviceSurfaceSupportKHR(VkPhysicalDevice /*pdev*/, | |
| uint32_t /*queue_family*/, | |
| VkSurfaceKHR /*surface_handle*/, | |
| VkBool32* supported) { | |
| *supported = VK_TRUE; | |
| return VK_SUCCESS; | |
| } | |
| VKAPI_ATTR | |
| VkResult GetPhysicalDeviceSurfaceCapabilitiesKHR( | |
| VkPhysicalDevice pdev, | |
| VkSurfaceKHR surface, | |
| VkSurfaceCapabilitiesKHR* capabilities) { | |
| ATRACE_CALL(); | |
| // Implement in terms of GetPhysicalDeviceSurfaceCapabilities2KHR | |
| VkPhysicalDeviceSurfaceInfo2KHR info2 = { | |
| VK_STRUCTURE_TYPE_PHYSICAL_DEVICE_SURFACE_INFO_2_KHR, | |
| nullptr, | |
| surface | |
| }; | |
| VkSurfaceCapabilities2KHR caps2 = { | |
| VK_STRUCTURE_TYPE_SURFACE_CAPABILITIES_2_KHR, | |
| nullptr, | |
| {}, | |
| }; | |
| VkResult result = GetPhysicalDeviceSurfaceCapabilities2KHR(pdev, &info2, &caps2); | |
| *capabilities = caps2.surfaceCapabilities; | |
| return result; | |
| } | |
| // Does the call-twice and VK_INCOMPLETE handling for querying lists | |
| // of things, where we already have the full set built in a vector. | |
| template <typename T> | |
| VkResult CopyWithIncomplete(std::vector<T> const& things, | |
| T* callerPtr, uint32_t* callerCount) { | |
| VkResult result = VK_SUCCESS; | |
| if (callerPtr) { | |
| if (things.size() > *callerCount) | |
| result = VK_INCOMPLETE; | |
| *callerCount = std::min(uint32_t(things.size()), *callerCount); | |
| std::copy(things.begin(), things.begin() + *callerCount, callerPtr); | |
| } else { | |
| *callerCount = things.size(); | |
| } | |
| return result; | |
| } | |
| VKAPI_ATTR | |
| VkResult GetPhysicalDeviceSurfaceFormatsKHR(VkPhysicalDevice pdev, | |
| VkSurfaceKHR surface_handle, | |
| uint32_t* count, | |
| VkSurfaceFormatKHR* formats) { | |
| ATRACE_CALL(); | |
| const InstanceData& instance_data = GetData(pdev); | |
| uint64_t consumer_usage = 0; | |
| bool colorspace_ext = | |
| instance_data.hook_extensions.test(ProcHook::EXT_swapchain_colorspace); | |
| if (surface_handle == VK_NULL_HANDLE) { | |
| ProcHook::Extension surfaceless = ProcHook::GOOGLE_surfaceless_query; | |
| bool surfaceless_enabled = | |
| instance_data.hook_extensions.test(surfaceless); | |
| if (!surfaceless_enabled) { | |
| return VK_ERROR_SURFACE_LOST_KHR; | |
| } | |
| // Support for VK_GOOGLE_surfaceless_query. | |
| // TODO(b/203826952): research proper value; temporarily use the | |
| // values seen on Pixel | |
| consumer_usage = AHARDWAREBUFFER_USAGE_COMPOSER_OVERLAY; | |
| } else { | |
| Surface& surface = *SurfaceFromHandle(surface_handle); | |
| consumer_usage = surface.consumer_usage; | |
| } | |
| AHardwareBuffer_Desc desc = {}; | |
| desc.width = 1; | |
| desc.height = 1; | |
| desc.layers = 1; | |
| desc.usage = consumer_usage | AHARDWAREBUFFER_USAGE_GPU_SAMPLED_IMAGE | | |
| AHARDWAREBUFFER_USAGE_GPU_FRAMEBUFFER; | |
| // We must support R8G8B8A8 | |
| std::vector<VkSurfaceFormatKHR> all_formats = { | |
| {VK_FORMAT_R8G8B8A8_UNORM, VK_COLOR_SPACE_SRGB_NONLINEAR_KHR}, | |
| {VK_FORMAT_R8G8B8A8_SRGB, VK_COLOR_SPACE_SRGB_NONLINEAR_KHR}, | |
| }; | |
| VkFormat format = VK_FORMAT_UNDEFINED; | |
| if (colorspace_ext) { | |
| for (VkColorSpaceKHR colorSpace : | |
| colorSpaceSupportedByVkEXTSwapchainColorspace) { | |
| format = VK_FORMAT_R8G8B8A8_UNORM; | |
| if (GetNativeDataspace(colorSpace, format) != DataSpace::UNKNOWN) { | |
| all_formats.emplace_back( | |
| VkSurfaceFormatKHR{format, colorSpace}); | |
| } | |
| format = VK_FORMAT_R8G8B8A8_SRGB; | |
| if (GetNativeDataspace(colorSpace, format) != DataSpace::UNKNOWN) { | |
| all_formats.emplace_back( | |
| VkSurfaceFormatKHR{format, colorSpace}); | |
| } | |
| } | |
| } | |
| // NOTE: Any new formats that are added must be coordinated across different | |
| // Android users. This includes the ANGLE team (a layered implementation of | |
| // OpenGL-ES). | |
| format = VK_FORMAT_R5G6B5_UNORM_PACK16; | |
| desc.format = AHARDWAREBUFFER_FORMAT_R5G6B5_UNORM; | |
| if (AHardwareBuffer_isSupported(&desc)) { | |
| all_formats.emplace_back( | |
| VkSurfaceFormatKHR{format, VK_COLOR_SPACE_SRGB_NONLINEAR_KHR}); | |
| if (colorspace_ext) { | |
| for (VkColorSpaceKHR colorSpace : | |
| colorSpaceSupportedByVkEXTSwapchainColorspace) { | |
| if (GetNativeDataspace(colorSpace, format) != | |
| DataSpace::UNKNOWN) { | |
| all_formats.emplace_back( | |
| VkSurfaceFormatKHR{format, colorSpace}); | |
| } | |
| } | |
| } | |
| } | |
| format = VK_FORMAT_R16G16B16A16_SFLOAT; | |
| desc.format = AHARDWAREBUFFER_FORMAT_R16G16B16A16_FLOAT; | |
| if (AHardwareBuffer_isSupported(&desc)) { | |
| all_formats.emplace_back( | |
| VkSurfaceFormatKHR{format, VK_COLOR_SPACE_SRGB_NONLINEAR_KHR}); | |
| if (colorspace_ext) { | |
| for (VkColorSpaceKHR colorSpace : | |
| colorSpaceSupportedByVkEXTSwapchainColorspace) { | |
| if (GetNativeDataspace(colorSpace, format) != | |
| DataSpace::UNKNOWN) { | |
| all_formats.emplace_back( | |
| VkSurfaceFormatKHR{format, colorSpace}); | |
| } | |
| } | |
| for ( | |
| VkColorSpaceKHR colorSpace : | |
| colorSpaceSupportedByVkEXTSwapchainColorspaceOnFP16SurfaceOnly) { | |
| if (GetNativeDataspace(colorSpace, format) != | |
| DataSpace::UNKNOWN) { | |
| all_formats.emplace_back( | |
| VkSurfaceFormatKHR{format, colorSpace}); | |
| } | |
| } | |
| } | |
| } | |
| format = VK_FORMAT_A2B10G10R10_UNORM_PACK32; | |
| desc.format = AHARDWAREBUFFER_FORMAT_R10G10B10A2_UNORM; | |
| if (AHardwareBuffer_isSupported(&desc)) { | |
| all_formats.emplace_back( | |
| VkSurfaceFormatKHR{format, VK_COLOR_SPACE_SRGB_NONLINEAR_KHR}); | |
| if (colorspace_ext) { | |
| for (VkColorSpaceKHR colorSpace : | |
| colorSpaceSupportedByVkEXTSwapchainColorspace) { | |
| if (GetNativeDataspace(colorSpace, format) != | |
| DataSpace::UNKNOWN) { | |
| all_formats.emplace_back( | |
| VkSurfaceFormatKHR{format, colorSpace}); | |
| } | |
| } | |
| } | |
| } | |
| format = VK_FORMAT_R8_UNORM; | |
| desc.format = AHARDWAREBUFFER_FORMAT_R8_UNORM; | |
| if (AHardwareBuffer_isSupported(&desc)) { | |
| if (colorspace_ext) { | |
| all_formats.emplace_back( | |
| VkSurfaceFormatKHR{format, VK_COLOR_SPACE_PASS_THROUGH_EXT}); | |
| } | |
| } | |
| bool rgba10x6_formats_ext = false; | |
| uint32_t exts_count; | |
| const auto& driver = GetData(pdev).driver; | |
| driver.EnumerateDeviceExtensionProperties(pdev, nullptr, &exts_count, | |
| nullptr); | |
| std::vector<VkExtensionProperties> props(exts_count); | |
| driver.EnumerateDeviceExtensionProperties(pdev, nullptr, &exts_count, | |
| props.data()); | |
| for (uint32_t i = 0; i < exts_count; i++) { | |
| VkExtensionProperties prop = props[i]; | |
| if (strcmp(prop.extensionName, | |
| VK_EXT_RGBA10X6_FORMATS_EXTENSION_NAME) == 0) { | |
| rgba10x6_formats_ext = true; | |
| } | |
| } | |
| format = VK_FORMAT_R10X6G10X6B10X6A10X6_UNORM_4PACK16; | |
| desc.format = AHARDWAREBUFFER_FORMAT_R10G10B10A10_UNORM; | |
| if (AHardwareBuffer_isSupported(&desc) && rgba10x6_formats_ext) { | |
| all_formats.emplace_back( | |
| VkSurfaceFormatKHR{format, VK_COLOR_SPACE_SRGB_NONLINEAR_KHR}); | |
| if (colorspace_ext) { | |
| for (VkColorSpaceKHR colorSpace : | |
| colorSpaceSupportedByVkEXTSwapchainColorspace) { | |
| if (GetNativeDataspace(colorSpace, format) != | |
| DataSpace::UNKNOWN) { | |
| all_formats.emplace_back( | |
| VkSurfaceFormatKHR{format, colorSpace}); | |
| } | |
| } | |
| } | |
| } | |
| // NOTE: Any new formats that are added must be coordinated across different | |
| // Android users. This includes the ANGLE team (a layered implementation of | |
| // OpenGL-ES). | |
| return CopyWithIncomplete(all_formats, formats, count); | |
| } | |
| VKAPI_ATTR | |
| VkResult GetPhysicalDeviceSurfaceCapabilities2KHR( | |
| VkPhysicalDevice physicalDevice, | |
| const VkPhysicalDeviceSurfaceInfo2KHR* pSurfaceInfo, | |
| VkSurfaceCapabilities2KHR* pSurfaceCapabilities) { | |
| ATRACE_CALL(); | |
| auto surface = pSurfaceInfo->surface; | |
| auto capabilities = &pSurfaceCapabilities->surfaceCapabilities; | |
| VkSurfacePresentModeEXT const *pPresentMode = nullptr; | |
| for (auto pNext = reinterpret_cast<VkBaseInStructure const *>(pSurfaceInfo->pNext); | |
| pNext; pNext = reinterpret_cast<VkBaseInStructure const *>(pNext->pNext)) { | |
| switch (pNext->sType) { | |
| case VK_STRUCTURE_TYPE_SURFACE_PRESENT_MODE_EXT: | |
| pPresentMode = reinterpret_cast<VkSurfacePresentModeEXT const *>(pNext); | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| int err; | |
| int width, height; | |
| int transform_hint; | |
| int max_buffer_count; | |
| int min_undequeued_buffers; | |
| if (surface == VK_NULL_HANDLE) { | |
| const InstanceData& instance_data = GetData(physicalDevice); | |
| ProcHook::Extension surfaceless = ProcHook::GOOGLE_surfaceless_query; | |
| bool surfaceless_enabled = | |
| instance_data.hook_extensions.test(surfaceless); | |
| if (!surfaceless_enabled) { | |
| // It is an error to pass a surface==VK_NULL_HANDLE unless the | |
| // VK_GOOGLE_surfaceless_query extension is enabled | |
| return VK_ERROR_SURFACE_LOST_KHR; | |
| } | |
| // Support for VK_GOOGLE_surfaceless_query. The primary purpose of this | |
| // extension for this function is for | |
| // VkSurfaceProtectedCapabilitiesKHR::supportsProtected. The following | |
| // four values cannot be known without a surface. Default values will | |
| // be supplied anyway, but cannot be relied upon. | |
| width = 0xFFFFFFFF; | |
| height = 0xFFFFFFFF; | |
| transform_hint = VK_SURFACE_TRANSFORM_INHERIT_BIT_KHR; | |
| capabilities->minImageCount = 0xFFFFFFFF; | |
| capabilities->maxImageCount = 0xFFFFFFFF; | |
| } else { | |
| ANativeWindow* window = SurfaceFromHandle(surface)->window.get(); | |
| err = window->query(window, NATIVE_WINDOW_DEFAULT_WIDTH, &width); | |
| if (err != android::OK) { | |
| ALOGE("NATIVE_WINDOW_DEFAULT_WIDTH query failed: %s (%d)", | |
| strerror(-err), err); | |
| return VK_ERROR_SURFACE_LOST_KHR; | |
| } | |
| err = window->query(window, NATIVE_WINDOW_DEFAULT_HEIGHT, &height); | |
| if (err != android::OK) { | |
| ALOGE("NATIVE_WINDOW_DEFAULT_WIDTH query failed: %s (%d)", | |
| strerror(-err), err); | |
| return VK_ERROR_SURFACE_LOST_KHR; | |
| } | |
| err = window->query(window, NATIVE_WINDOW_TRANSFORM_HINT, | |
| &transform_hint); | |
| if (err != android::OK) { | |
| ALOGE("NATIVE_WINDOW_TRANSFORM_HINT query failed: %s (%d)", | |
| strerror(-err), err); | |
| return VK_ERROR_SURFACE_LOST_KHR; | |
| } | |
| err = window->query(window, NATIVE_WINDOW_MAX_BUFFER_COUNT, | |
| &max_buffer_count); | |
| if (err != android::OK) { | |
| ALOGE("NATIVE_WINDOW_MAX_BUFFER_COUNT query failed: %s (%d)", | |
| strerror(-err), err); | |
| return VK_ERROR_SURFACE_LOST_KHR; | |
| } | |
| err = window->query(window, NATIVE_WINDOW_MIN_UNDEQUEUED_BUFFERS, | |
| &min_undequeued_buffers); | |
| if (err != android::OK) { | |
| ALOGE("NATIVE_WINDOW_MIN_UNDEQUEUED_BUFFERS query failed: %s (%d)", | |
| strerror(-err), err); | |
| return VK_ERROR_SURFACE_LOST_KHR; | |
| } | |
| // Additional buffer count over min_undequeued_buffers in vulkan came from 2 total | |
| // being technically enough for fifo (although a poor experience) vs 3 being the | |
| // absolute minimum for mailbox to be useful. So min_undequeued_buffers + 2 is sensible | |
| static constexpr int default_additional_buffers = 2; | |
| if(pPresentMode != nullptr) { | |
| switch (pPresentMode->presentMode) { | |
| case VK_PRESENT_MODE_IMMEDIATE_KHR: | |
| ALOGE("Swapchain present mode VK_PRESENT_MODE_IMMEDIATE_KHR is not supported"); | |
| break; | |
| case VK_PRESENT_MODE_MAILBOX_KHR: | |
| case VK_PRESENT_MODE_FIFO_KHR: | |
| capabilities->minImageCount = std::min(max_buffer_count, | |
| min_undequeued_buffers + default_additional_buffers); | |
| capabilities->maxImageCount = static_cast<uint32_t>(max_buffer_count); | |
| break; | |
| case VK_PRESENT_MODE_FIFO_RELAXED_KHR: | |
| ALOGE("Swapchain present mode VK_PRESENT_MODE_FIFO_RELEAXED_KHR " | |
| "is not supported"); | |
| break; | |
| case VK_PRESENT_MODE_SHARED_DEMAND_REFRESH_KHR: | |
| case VK_PRESENT_MODE_SHARED_CONTINUOUS_REFRESH_KHR: | |
| capabilities->minImageCount = 1; | |
| capabilities->maxImageCount = 1; | |
| break; | |
| default: | |
| ALOGE("Unrecognized swapchain present mode %u is not supported", | |
| pPresentMode->presentMode); | |
| break; | |
| } | |
| } else { | |
| capabilities->minImageCount = std::min(max_buffer_count, | |
| min_undequeued_buffers + default_additional_buffers); | |
| capabilities->maxImageCount = static_cast<uint32_t>(max_buffer_count); | |
| } | |
| } | |
| capabilities->currentExtent = | |
| VkExtent2D{static_cast<uint32_t>(width), static_cast<uint32_t>(height)}; | |
| // TODO(http://b/134182502): Figure out what the max extent should be. | |
| capabilities->minImageExtent = VkExtent2D{1, 1}; | |
| capabilities->maxImageExtent = VkExtent2D{4096, 4096}; | |
| if (capabilities->maxImageExtent.height < | |
| capabilities->currentExtent.height) { | |
| capabilities->maxImageExtent.height = | |
| capabilities->currentExtent.height; | |
| } | |
| if (capabilities->maxImageExtent.width < | |
| capabilities->currentExtent.width) { | |
| capabilities->maxImageExtent.width = capabilities->currentExtent.width; | |
| } | |
| capabilities->maxImageArrayLayers = 1; | |
| capabilities->supportedTransforms = kSupportedTransforms; | |
| capabilities->currentTransform = | |
| TranslateNativeToVulkanTransform(transform_hint); | |
| // On Android, window composition is a WindowManager property, not something | |
| // associated with the bufferqueue. It can't be changed from here. | |
| capabilities->supportedCompositeAlpha = VK_COMPOSITE_ALPHA_INHERIT_BIT_KHR; | |
| capabilities->supportedUsageFlags = | |
| VK_IMAGE_USAGE_TRANSFER_SRC_BIT | VK_IMAGE_USAGE_TRANSFER_DST_BIT | | |
| VK_IMAGE_USAGE_SAMPLED_BIT | VK_IMAGE_USAGE_STORAGE_BIT | | |
| VK_IMAGE_USAGE_COLOR_ATTACHMENT_BIT | | |
| VK_IMAGE_USAGE_INPUT_ATTACHMENT_BIT; | |
| for (auto pNext = reinterpret_cast<VkBaseOutStructure*>(pSurfaceCapabilities->pNext); | |
| pNext; pNext = reinterpret_cast<VkBaseOutStructure*>(pNext->pNext)) { | |
| switch (pNext->sType) { | |
| case VK_STRUCTURE_TYPE_SHARED_PRESENT_SURFACE_CAPABILITIES_KHR: { | |
| VkSharedPresentSurfaceCapabilitiesKHR* shared_caps = | |
| reinterpret_cast<VkSharedPresentSurfaceCapabilitiesKHR*>(pNext); | |
| // Claim same set of usage flags are supported for | |
| // shared present modes as for other modes. | |
| shared_caps->sharedPresentSupportedUsageFlags = | |
| pSurfaceCapabilities->surfaceCapabilities | |
| .supportedUsageFlags; | |
| } break; | |
| case VK_STRUCTURE_TYPE_SURFACE_PROTECTED_CAPABILITIES_KHR: { | |
| VkSurfaceProtectedCapabilitiesKHR* protected_caps = | |
| reinterpret_cast<VkSurfaceProtectedCapabilitiesKHR*>(pNext); | |
| protected_caps->supportsProtected = VK_TRUE; | |
| } break; | |
| case VK_STRUCTURE_TYPE_SURFACE_PRESENT_SCALING_CAPABILITIES_EXT: { | |
| VkSurfacePresentScalingCapabilitiesEXT* scaling_caps = | |
| reinterpret_cast<VkSurfacePresentScalingCapabilitiesEXT*>(pNext); | |
| // By default, Android stretches the buffer to fit the window, | |
| // without preserving aspect ratio. Other modes are technically possible | |
| // but consult with CoGS team before exposing them here! | |
| scaling_caps->supportedPresentScaling = VK_PRESENT_SCALING_STRETCH_BIT_EXT; | |
| // Since we always scale, we don't support any gravity. | |
| scaling_caps->supportedPresentGravityX = 0; | |
| scaling_caps->supportedPresentGravityY = 0; | |
| // Scaled image limits are just the basic image limits | |
| scaling_caps->minScaledImageExtent = capabilities->minImageExtent; | |
| scaling_caps->maxScaledImageExtent = capabilities->maxImageExtent; | |
| } break; | |
| case VK_STRUCTURE_TYPE_SURFACE_PRESENT_MODE_COMPATIBILITY_EXT: { | |
| VkSurfacePresentModeCompatibilityEXT* mode_caps = | |
| reinterpret_cast<VkSurfacePresentModeCompatibilityEXT*>(pNext); | |
| ALOG_ASSERT(pPresentMode, | |
| "querying VkSurfacePresentModeCompatibilityEXT " | |
| "requires VkSurfacePresentModeEXT to be provided"); | |
| std::vector<VkPresentModeKHR> compatibleModes; | |
| compatibleModes.push_back(pPresentMode->presentMode); | |
| switch (pPresentMode->presentMode) { | |
| // Shared modes are both compatible with each other. | |
| case VK_PRESENT_MODE_SHARED_DEMAND_REFRESH_KHR: | |
| compatibleModes.push_back(VK_PRESENT_MODE_SHARED_CONTINUOUS_REFRESH_KHR); | |
| break; | |
| case VK_PRESENT_MODE_SHARED_CONTINUOUS_REFRESH_KHR: | |
| compatibleModes.push_back(VK_PRESENT_MODE_SHARED_DEMAND_REFRESH_KHR); | |
| break; | |
| default: | |
| // Other modes are only compatible with themselves. | |
| // TODO: consider whether switching between FIFO and MAILBOX is reasonable | |
| break; | |
| } | |
| // Note: this does not generate VK_INCOMPLETE since we're nested inside | |
| // a larger query and there would be no way to determine exactly where it came from. | |
| CopyWithIncomplete(compatibleModes, mode_caps->pPresentModes, | |
| &mode_caps->presentModeCount); | |
| } break; | |
| default: | |
| // Ignore all other extension structs | |
| break; | |
| } | |
| } | |
| return VK_SUCCESS; | |
| } | |
| VKAPI_ATTR | |
| VkResult GetPhysicalDeviceSurfaceFormats2KHR( | |
| VkPhysicalDevice physicalDevice, | |
| const VkPhysicalDeviceSurfaceInfo2KHR* pSurfaceInfo, | |
| uint32_t* pSurfaceFormatCount, | |
| VkSurfaceFormat2KHR* pSurfaceFormats) { | |
| ATRACE_CALL(); | |
| if (!pSurfaceFormats) { | |
| return GetPhysicalDeviceSurfaceFormatsKHR(physicalDevice, | |
| pSurfaceInfo->surface, | |
| pSurfaceFormatCount, nullptr); | |
| } | |
| // temp vector for forwarding; we'll marshal it into the pSurfaceFormats | |
| // after the call. | |
| std::vector<VkSurfaceFormatKHR> surface_formats(*pSurfaceFormatCount); | |
| VkResult result = GetPhysicalDeviceSurfaceFormatsKHR( | |
| physicalDevice, pSurfaceInfo->surface, pSurfaceFormatCount, | |
| surface_formats.data()); | |
| if (result != VK_SUCCESS && result != VK_INCOMPLETE) { | |
| return result; | |
| } | |
| const auto& driver = GetData(physicalDevice).driver; | |
| // marshal results individually due to stride difference. | |
| uint32_t formats_to_marshal = *pSurfaceFormatCount; | |
| for (uint32_t i = 0u; i < formats_to_marshal; i++) { | |
| pSurfaceFormats[i].surfaceFormat = surface_formats[i]; | |
| // Query the compression properties for the surface format | |
| VkSurfaceFormat2KHR* pSurfaceFormat = &pSurfaceFormats[i]; | |
| while (pSurfaceFormat->pNext) { | |
| pSurfaceFormat = | |
| reinterpret_cast<VkSurfaceFormat2KHR*>(pSurfaceFormat->pNext); | |
| switch (pSurfaceFormat->sType) { | |
| case VK_STRUCTURE_TYPE_IMAGE_COMPRESSION_PROPERTIES_EXT: { | |
| VkImageCompressionPropertiesEXT* surfaceCompressionProps = | |
| reinterpret_cast<VkImageCompressionPropertiesEXT*>( | |
| pSurfaceFormat); | |
| if (surfaceCompressionProps && | |
| (driver.GetPhysicalDeviceImageFormatProperties2KHR || | |
| driver.GetPhysicalDeviceImageFormatProperties2)) { | |
| VkPhysicalDeviceImageFormatInfo2 imageFormatInfo = {}; | |
| imageFormatInfo.sType = | |
| VK_STRUCTURE_TYPE_PHYSICAL_DEVICE_IMAGE_FORMAT_INFO_2; | |
| imageFormatInfo.format = | |
| pSurfaceFormats[i].surfaceFormat.format; | |
| imageFormatInfo.type = VK_IMAGE_TYPE_2D; | |
| imageFormatInfo.usage = | |
| VK_IMAGE_USAGE_COLOR_ATTACHMENT_BIT; | |
| imageFormatInfo.pNext = nullptr; | |
| VkImageCompressionControlEXT compressionControl = {}; | |
| compressionControl.sType = | |
| VK_STRUCTURE_TYPE_IMAGE_COMPRESSION_CONTROL_EXT; | |
| compressionControl.pNext = imageFormatInfo.pNext; | |
| compressionControl.flags = | |
| VK_IMAGE_COMPRESSION_FIXED_RATE_DEFAULT_EXT; | |
| imageFormatInfo.pNext = &compressionControl; | |
| VkImageCompressionPropertiesEXT compressionProps = {}; | |
| compressionProps.sType = | |
| VK_STRUCTURE_TYPE_IMAGE_COMPRESSION_PROPERTIES_EXT; | |
| compressionProps.pNext = nullptr; | |
| VkImageFormatProperties2KHR imageFormatProps = {}; | |
| imageFormatProps.sType = | |
| VK_STRUCTURE_TYPE_IMAGE_FORMAT_PROPERTIES_2_KHR; | |
| imageFormatProps.pNext = &compressionProps; | |
| VkResult compressionRes = | |
| GetPhysicalDeviceImageFormatProperties2( | |
| physicalDevice, &imageFormatInfo, | |
| &imageFormatProps); | |
| if (compressionRes == VK_SUCCESS) { | |
| surfaceCompressionProps->imageCompressionFlags = | |
| compressionProps.imageCompressionFlags; | |
| surfaceCompressionProps | |
| ->imageCompressionFixedRateFlags = | |
| compressionProps.imageCompressionFixedRateFlags; | |
| } else if (compressionRes == | |
| VK_ERROR_OUT_OF_HOST_MEMORY || | |
| compressionRes == | |
| VK_ERROR_OUT_OF_DEVICE_MEMORY) { | |
| return compressionRes; | |
| } else { | |
| // For any of the *_NOT_SUPPORTED errors we continue | |
| // onto the next format | |
| continue; | |
| } | |
| } | |
| } break; | |
| default: | |
| // Ignore all other extension structs | |
| break; | |
| } | |
| } | |
| } | |
| return result; | |
| } | |
| VKAPI_ATTR | |
| VkResult GetPhysicalDeviceSurfacePresentModesKHR(VkPhysicalDevice pdev, | |
| VkSurfaceKHR surface, | |
| uint32_t* count, | |
| VkPresentModeKHR* modes) { | |
| ATRACE_CALL(); | |
| int err; | |
| int query_value; | |
| std::vector<VkPresentModeKHR> present_modes; | |
| if (surface == VK_NULL_HANDLE) { | |
| const InstanceData& instance_data = GetData(pdev); | |
| ProcHook::Extension surfaceless = ProcHook::GOOGLE_surfaceless_query; | |
| bool surfaceless_enabled = | |
| instance_data.hook_extensions.test(surfaceless); | |
| if (!surfaceless_enabled) { | |
| return VK_ERROR_SURFACE_LOST_KHR; | |
| } | |
| // Support for VK_GOOGLE_surfaceless_query. The primary purpose of this | |
| // extension for this function is for | |
| // VK_PRESENT_MODE_SHARED_DEMAND_REFRESH_KHR and | |
| // VK_PRESENT_MODE_SHARED_CONTINUOUS_REFRESH_KHR. We technically cannot | |
| // know if VK_PRESENT_MODE_SHARED_MAILBOX_KHR is supported without a | |
| // surface, and that cannot be relied upon. Therefore, don't return it. | |
| present_modes.push_back(VK_PRESENT_MODE_FIFO_KHR); | |
| } else { | |
| ANativeWindow* window = SurfaceFromHandle(surface)->window.get(); | |
| err = window->query(window, NATIVE_WINDOW_MIN_UNDEQUEUED_BUFFERS, | |
| &query_value); | |
| if (err != android::OK || query_value < 0) { | |
| ALOGE( | |
| "NATIVE_WINDOW_MIN_UNDEQUEUED_BUFFERS query failed: %s (%d) " | |
| "value=%d", | |
| strerror(-err), err, query_value); | |
| return VK_ERROR_SURFACE_LOST_KHR; | |
| } | |
| uint32_t min_undequeued_buffers = static_cast<uint32_t>(query_value); | |
| err = | |
| window->query(window, NATIVE_WINDOW_MAX_BUFFER_COUNT, &query_value); | |
| if (err != android::OK || query_value < 0) { | |
| ALOGE( | |
| "NATIVE_WINDOW_MAX_BUFFER_COUNT query failed: %s (%d) value=%d", | |
| strerror(-err), err, query_value); | |
| return VK_ERROR_SURFACE_LOST_KHR; | |
| } | |
| uint32_t max_buffer_count = static_cast<uint32_t>(query_value); | |
| if (min_undequeued_buffers + 1 < max_buffer_count) | |
| present_modes.push_back(VK_PRESENT_MODE_MAILBOX_KHR); | |
| present_modes.push_back(VK_PRESENT_MODE_FIFO_KHR); | |
| } | |
| VkPhysicalDevicePresentationPropertiesANDROID present_properties; | |
| QueryPresentationProperties(pdev, &present_properties); | |
| if (present_properties.sharedImage) { | |
| present_modes.push_back(VK_PRESENT_MODE_SHARED_DEMAND_REFRESH_KHR); | |
| present_modes.push_back(VK_PRESENT_MODE_SHARED_CONTINUOUS_REFRESH_KHR); | |
| } | |
| return CopyWithIncomplete(present_modes, modes, count); | |
| } | |
| VKAPI_ATTR | |
| VkResult GetDeviceGroupPresentCapabilitiesKHR( | |
| VkDevice, | |
| VkDeviceGroupPresentCapabilitiesKHR* pDeviceGroupPresentCapabilities) { | |
| ATRACE_CALL(); | |
| ALOGV_IF(pDeviceGroupPresentCapabilities->sType != | |
| VK_STRUCTURE_TYPE_DEVICE_GROUP_PRESENT_CAPABILITIES_KHR, | |
| "vkGetDeviceGroupPresentCapabilitiesKHR: invalid " | |
| "VkDeviceGroupPresentCapabilitiesKHR structure type %d", | |
| pDeviceGroupPresentCapabilities->sType); | |
| memset(pDeviceGroupPresentCapabilities->presentMask, 0, | |
| sizeof(pDeviceGroupPresentCapabilities->presentMask)); | |
| // assume device group of size 1 | |
| pDeviceGroupPresentCapabilities->presentMask[0] = 1 << 0; | |
| pDeviceGroupPresentCapabilities->modes = | |
| VK_DEVICE_GROUP_PRESENT_MODE_LOCAL_BIT_KHR; | |
| return VK_SUCCESS; | |
| } | |
| VKAPI_ATTR | |
| VkResult GetDeviceGroupSurfacePresentModesKHR( | |
| VkDevice, | |
| VkSurfaceKHR, | |
| VkDeviceGroupPresentModeFlagsKHR* pModes) { | |
| ATRACE_CALL(); | |
| *pModes = VK_DEVICE_GROUP_PRESENT_MODE_LOCAL_BIT_KHR; | |
| return VK_SUCCESS; | |
| } | |
| VKAPI_ATTR | |
| VkResult GetPhysicalDevicePresentRectanglesKHR(VkPhysicalDevice, | |
| VkSurfaceKHR surface, | |
| uint32_t* pRectCount, | |
| VkRect2D* pRects) { | |
| ATRACE_CALL(); | |
| if (!pRects) { | |
| *pRectCount = 1; | |
| } else { | |
| uint32_t count = std::min(*pRectCount, 1u); | |
| bool incomplete = *pRectCount < 1; | |
| *pRectCount = count; | |
| if (incomplete) { | |
| return VK_INCOMPLETE; | |
| } | |
| int err; | |
| ANativeWindow* window = SurfaceFromHandle(surface)->window.get(); | |
| int width = 0, height = 0; | |
| err = window->query(window, NATIVE_WINDOW_DEFAULT_WIDTH, &width); | |
| if (err != android::OK) { | |
| ALOGE("NATIVE_WINDOW_DEFAULT_WIDTH query failed: %s (%d)", | |
| strerror(-err), err); | |
| } | |
| err = window->query(window, NATIVE_WINDOW_DEFAULT_HEIGHT, &height); | |
| if (err != android::OK) { | |
| ALOGE("NATIVE_WINDOW_DEFAULT_WIDTH query failed: %s (%d)", | |
| strerror(-err), err); | |
| } | |
| pRects[0].offset.x = 0; | |
| pRects[0].offset.y = 0; | |
| pRects[0].extent = VkExtent2D{static_cast<uint32_t>(width), | |
| static_cast<uint32_t>(height)}; | |
| } | |
| return VK_SUCCESS; | |
| } | |
| static void DestroySwapchainInternal(VkDevice device, | |
| VkSwapchainKHR swapchain_handle, | |
| const VkAllocationCallbacks* allocator) { | |
| ATRACE_CALL(); | |
| const auto& dispatch = GetData(device).driver; | |
| Swapchain* swapchain = SwapchainFromHandle(swapchain_handle); | |
| if (!swapchain) { | |
| return; | |
| } | |
| bool active = swapchain->surface.swapchain_handle == swapchain_handle; | |
| ANativeWindow* window = active ? swapchain->surface.window.get() : nullptr; | |
| if (window && swapchain->frame_timestamps_enabled) { | |
| native_window_enable_frame_timestamps(window, false); | |
| } | |
| for (uint32_t i = 0; i < swapchain->num_images; i++) { | |
| ReleaseSwapchainImage(device, swapchain->shared, window, -1, | |
| swapchain->images[i], false); | |
| } | |
| if (active) { | |
| swapchain->surface.swapchain_handle = VK_NULL_HANDLE; | |
| } | |
| if (!allocator) { | |
| allocator = &GetData(device).allocator; | |
| } | |
| swapchain->~Swapchain(); | |
| allocator->pfnFree(allocator->pUserData, swapchain); | |
| } | |
| static VkResult getProducerUsage(const VkDevice& device, | |
| const VkSwapchainCreateInfoKHR* create_info, | |
| const VkSwapchainImageUsageFlagsANDROID swapchain_image_usage, | |
| bool create_protected_swapchain, | |
| uint64_t* producer_usage) { | |
| // Get the physical device to query the appropriate producer usage | |
| const VkPhysicalDevice& pdev = GetData(device).driver_physical_device; | |
| const InstanceData& instance_data = GetData(pdev); | |
| const InstanceDriverTable& instance_dispatch = instance_data.driver; | |
| if (instance_dispatch.GetPhysicalDeviceImageFormatProperties2 || | |
| instance_dispatch.GetPhysicalDeviceImageFormatProperties2KHR) { | |
| // Look through the create_info pNext chain passed to createSwapchainKHR | |
| // for an image compression control struct. | |
| // if one is found AND the appropriate extensions are enabled, create a | |
| // VkImageCompressionControlEXT structure to pass on to | |
| // GetPhysicalDeviceImageFormatProperties2 | |
| void* compression_control_pNext = nullptr; | |
| VkImageCompressionControlEXT image_compression = {}; | |
| const VkSwapchainCreateInfoKHR* create_infos = create_info; | |
| while (create_infos->pNext) { | |
| create_infos = reinterpret_cast<const VkSwapchainCreateInfoKHR*>(create_infos->pNext); | |
| switch (create_infos->sType) { | |
| case VK_STRUCTURE_TYPE_IMAGE_COMPRESSION_CONTROL_EXT: { | |
| const VkImageCompressionControlEXT* compression_infos = | |
| reinterpret_cast<const VkImageCompressionControlEXT*>(create_infos); | |
| image_compression = *compression_infos; | |
| image_compression.pNext = nullptr; | |
| compression_control_pNext = &image_compression; | |
| } break; | |
| default: | |
| // Ignore all other info structs | |
| break; | |
| } | |
| } | |
| // call GetPhysicalDeviceImageFormatProperties2KHR | |
| VkPhysicalDeviceExternalImageFormatInfo external_image_format_info = { | |
| .sType = VK_STRUCTURE_TYPE_PHYSICAL_DEVICE_EXTERNAL_IMAGE_FORMAT_INFO, | |
| .pNext = compression_control_pNext, | |
| .handleType = VK_EXTERNAL_MEMORY_HANDLE_TYPE_ANDROID_HARDWARE_BUFFER_BIT_ANDROID, | |
| }; | |
| // AHB does not have an sRGB format so we can't pass it to GPDIFP | |
| // We need to convert the format to unorm if it is srgb | |
| VkFormat format = create_info->imageFormat; | |
| if (format == VK_FORMAT_R8G8B8A8_SRGB) { | |
| format = VK_FORMAT_R8G8B8A8_UNORM; | |
| } | |
| VkPhysicalDeviceImageFormatInfo2 image_format_info = { | |
| .sType = VK_STRUCTURE_TYPE_PHYSICAL_DEVICE_IMAGE_FORMAT_INFO_2, | |
| .pNext = &external_image_format_info, | |
| .format = format, | |
| .type = VK_IMAGE_TYPE_2D, | |
| .tiling = VK_IMAGE_TILING_OPTIMAL, | |
| .usage = create_info->imageUsage, | |
| .flags = create_protected_swapchain ? VK_IMAGE_CREATE_PROTECTED_BIT : 0u, | |
| }; | |
| // If supporting mutable format swapchain add the mutable format flag | |
| if (create_info->flags & VK_SWAPCHAIN_CREATE_MUTABLE_FORMAT_BIT_KHR) { | |
| image_format_info.flags |= VK_IMAGE_CREATE_MUTABLE_FORMAT_BIT; | |
| image_format_info.flags |= VK_IMAGE_CREATE_EXTENDED_USAGE_BIT_KHR; | |
| } | |
| VkAndroidHardwareBufferUsageANDROID ahb_usage; | |
| ahb_usage.sType = VK_STRUCTURE_TYPE_ANDROID_HARDWARE_BUFFER_USAGE_ANDROID; | |
| ahb_usage.pNext = nullptr; | |
| VkImageFormatProperties2 image_format_properties; | |
| image_format_properties.sType = VK_STRUCTURE_TYPE_IMAGE_FORMAT_PROPERTIES_2; | |
| image_format_properties.pNext = &ahb_usage; | |
| VkResult result = GetPhysicalDeviceImageFormatProperties2( | |
| pdev, &image_format_info, &image_format_properties); | |
| if (result != VK_SUCCESS) { | |
| ALOGE( | |
| "VkGetPhysicalDeviceImageFormatProperties2 for AHB usage " | |
| "failed: %d", | |
| result); | |
| return VK_ERROR_SURFACE_LOST_KHR; | |
| } | |
| // Determine if USAGE_FRONT_BUFFER is needed. | |
| // GPDIFP2 has no means of using VkSwapchainImageUsageFlagsANDROID when | |
| // querying for producer_usage. So androidHardwareBufferUsage will not | |
| // contain USAGE_FRONT_BUFFER. We need to manually check for usage here. | |
| if (!(swapchain_image_usage & VK_SWAPCHAIN_IMAGE_USAGE_SHARED_BIT_ANDROID)) { | |
| *producer_usage = ahb_usage.androidHardwareBufferUsage; | |
| return VK_SUCCESS; | |
| } | |
| // Check if USAGE_FRONT_BUFFER is supported for this swapchain | |
| AHardwareBuffer_Desc ahb_desc = { | |
| .width = create_info->imageExtent.width, | |
| .height = create_info->imageExtent.height, | |
| .layers = create_info->imageArrayLayers, | |
| .format = create_info->imageFormat, | |
| .usage = ahb_usage.androidHardwareBufferUsage | AHARDWAREBUFFER_USAGE_FRONT_BUFFER, | |
| .stride = 0, // stride is always ignored when calling isSupported() | |
| }; | |
| // If FRONT_BUFFER is not supported, | |
| // then we need to call GetSwapchainGrallocUsageXAndroid below | |
| if (AHardwareBuffer_isSupported(&ahb_desc)) { | |
| *producer_usage = ahb_usage.androidHardwareBufferUsage; | |
| *producer_usage |= AHARDWAREBUFFER_USAGE_FRONT_BUFFER; | |
| return VK_SUCCESS; | |
| } | |
| } | |
| uint64_t native_usage = 0; | |
| void* usage_info_pNext = nullptr; | |
| VkResult result; | |
| VkImageCompressionControlEXT image_compression = {}; | |
| const auto& dispatch = GetData(device).driver; | |
| if (dispatch.GetSwapchainGrallocUsage4ANDROID) { | |
| ATRACE_BEGIN("GetSwapchainGrallocUsage4ANDROID"); | |
| VkGrallocUsageInfo2ANDROID gralloc_usage_info = {}; | |
| gralloc_usage_info.sType = | |
| VK_STRUCTURE_TYPE_GRALLOC_USAGE_INFO_2_ANDROID; | |
| gralloc_usage_info.format = create_info->imageFormat; | |
| gralloc_usage_info.imageUsage = create_info->imageUsage; | |
| gralloc_usage_info.swapchainImageUsage = swapchain_image_usage; | |
| // Look through the pNext chain for an image compression control struct | |
| // if one is found AND the appropriate extensions are enabled, | |
| // append it to be the gralloc usage pNext chain | |
| const VkSwapchainCreateInfoKHR* create_infos = create_info; | |
| while (create_infos->pNext) { | |
| create_infos = reinterpret_cast<const VkSwapchainCreateInfoKHR*>( | |
| create_infos->pNext); | |
| switch (create_infos->sType) { | |
| case VK_STRUCTURE_TYPE_IMAGE_COMPRESSION_CONTROL_EXT: { | |
| const VkImageCompressionControlEXT* compression_infos = | |
| reinterpret_cast<const VkImageCompressionControlEXT*>( | |
| create_infos); | |
| image_compression = *compression_infos; | |
| image_compression.pNext = nullptr; | |
| usage_info_pNext = &image_compression; | |
| } break; | |
| default: | |
| // Ignore all other info structs | |
| break; | |
| } | |
| } | |
| gralloc_usage_info.pNext = usage_info_pNext; | |
| result = dispatch.GetSwapchainGrallocUsage4ANDROID( | |
| device, &gralloc_usage_info, &native_usage); | |
| ATRACE_END(); | |
| if (result != VK_SUCCESS) { | |
| ALOGE("vkGetSwapchainGrallocUsage4ANDROID failed: %d", result); | |
| return VK_ERROR_SURFACE_LOST_KHR; | |
| } | |
| } else if (dispatch.GetSwapchainGrallocUsage3ANDROID) { | |
| ATRACE_BEGIN("GetSwapchainGrallocUsage3ANDROID"); | |
| VkGrallocUsageInfoANDROID gralloc_usage_info = {}; | |
| gralloc_usage_info.sType = VK_STRUCTURE_TYPE_GRALLOC_USAGE_INFO_ANDROID; | |
| gralloc_usage_info.format = create_info->imageFormat; | |
| gralloc_usage_info.imageUsage = create_info->imageUsage; | |
| // Look through the pNext chain for an image compression control struct | |
| // if one is found AND the appropriate extensions are enabled, | |
| // append it to be the gralloc usage pNext chain | |
| const VkSwapchainCreateInfoKHR* create_infos = create_info; | |
| while (create_infos->pNext) { | |
| create_infos = reinterpret_cast<const VkSwapchainCreateInfoKHR*>( | |
| create_infos->pNext); | |
| switch (create_infos->sType) { | |
| case VK_STRUCTURE_TYPE_IMAGE_COMPRESSION_CONTROL_EXT: { | |
| const VkImageCompressionControlEXT* compression_infos = | |
| reinterpret_cast<const VkImageCompressionControlEXT*>( | |
| create_infos); | |
| image_compression = *compression_infos; | |
| image_compression.pNext = nullptr; | |
| usage_info_pNext = &image_compression; | |
| } break; | |
| default: | |
| // Ignore all other info structs | |
| break; | |
| } | |
| } | |
| gralloc_usage_info.pNext = usage_info_pNext; | |
| result = dispatch.GetSwapchainGrallocUsage3ANDROID( | |
| device, &gralloc_usage_info, &native_usage); | |
| ATRACE_END(); | |
| if (result != VK_SUCCESS) { | |
| ALOGE("vkGetSwapchainGrallocUsage3ANDROID failed: %d", result); | |
| return VK_ERROR_SURFACE_LOST_KHR; | |
| } | |
| } else if (dispatch.GetSwapchainGrallocUsage2ANDROID) { | |
| uint64_t consumer_usage, producer_usage; | |
| ATRACE_BEGIN("GetSwapchainGrallocUsage2ANDROID"); | |
| result = dispatch.GetSwapchainGrallocUsage2ANDROID( | |
| device, create_info->imageFormat, create_info->imageUsage, | |
| swapchain_image_usage, &consumer_usage, &producer_usage); | |
| ATRACE_END(); | |
| if (result != VK_SUCCESS) { | |
| ALOGE("vkGetSwapchainGrallocUsage2ANDROID failed: %d", result); | |
| return VK_ERROR_SURFACE_LOST_KHR; | |
| } | |
| native_usage = | |
| convertGralloc1ToBufferUsage(producer_usage, consumer_usage); | |
| } else if (dispatch.GetSwapchainGrallocUsageANDROID) { | |
| ATRACE_BEGIN("GetSwapchainGrallocUsageANDROID"); | |
| int32_t legacy_usage = 0; | |
| result = dispatch.GetSwapchainGrallocUsageANDROID( | |
| device, create_info->imageFormat, create_info->imageUsage, | |
| &legacy_usage); | |
| ATRACE_END(); | |
| if (result != VK_SUCCESS) { | |
| ALOGE("vkGetSwapchainGrallocUsageANDROID failed: %d", result); | |
| return VK_ERROR_SURFACE_LOST_KHR; | |
| } | |
| native_usage = static_cast<uint64_t>(legacy_usage); | |
| } | |
| *producer_usage = native_usage; | |
| return VK_SUCCESS; | |
| } | |
| VKAPI_ATTR | |
| VkResult CreateSwapchainKHR(VkDevice device, | |
| const VkSwapchainCreateInfoKHR* create_info, | |
| const VkAllocationCallbacks* allocator, | |
| VkSwapchainKHR* swapchain_handle) { | |
| ATRACE_CALL(); | |
| int err; | |
| VkResult result = VK_SUCCESS; | |
| ALOGV("vkCreateSwapchainKHR: surface=0x%" PRIx64 | |
| " minImageCount=%u imageFormat=%u imageColorSpace=%u" | |
| " imageExtent=%ux%u imageUsage=%#x preTransform=%u presentMode=%u" | |
| " oldSwapchain=0x%" PRIx64, | |
| reinterpret_cast<uint64_t>(create_info->surface), | |
| create_info->minImageCount, create_info->imageFormat, | |
| create_info->imageColorSpace, create_info->imageExtent.width, | |
| create_info->imageExtent.height, create_info->imageUsage, | |
| create_info->preTransform, create_info->presentMode, | |
| reinterpret_cast<uint64_t>(create_info->oldSwapchain)); | |
| if (!allocator) | |
| allocator = &GetData(device).allocator; | |
| PixelFormat native_pixel_format = | |
| GetNativePixelFormat(create_info->imageFormat); | |
| DataSpace native_dataspace = GetNativeDataspace( | |
| create_info->imageColorSpace, create_info->imageFormat); | |
| if (native_dataspace == DataSpace::UNKNOWN) { | |
| ALOGE( | |
| "CreateSwapchainKHR(VkSwapchainCreateInfoKHR.imageColorSpace = %d) " | |
| "failed: Unsupported color space", | |
| create_info->imageColorSpace); | |
| return VK_ERROR_INITIALIZATION_FAILED; | |
| } | |
| ALOGV_IF(create_info->imageArrayLayers != 1, | |
| "swapchain imageArrayLayers=%u not supported", | |
| create_info->imageArrayLayers); | |
| ALOGV_IF((create_info->preTransform & ~kSupportedTransforms) != 0, | |
| "swapchain preTransform=%#x not supported", | |
| create_info->preTransform); | |
| ALOGV_IF(!(create_info->presentMode == VK_PRESENT_MODE_FIFO_KHR || | |
| create_info->presentMode == VK_PRESENT_MODE_MAILBOX_KHR || | |
| create_info->presentMode == VK_PRESENT_MODE_SHARED_DEMAND_REFRESH_KHR || | |
| create_info->presentMode == VK_PRESENT_MODE_SHARED_CONTINUOUS_REFRESH_KHR), | |
| "swapchain presentMode=%u not supported", | |
| create_info->presentMode); | |
| Surface& surface = *SurfaceFromHandle(create_info->surface); | |
| if (surface.swapchain_handle != create_info->oldSwapchain) { | |
| ALOGV("Can't create a swapchain for VkSurfaceKHR 0x%" PRIx64 | |
| " because it already has active swapchain 0x%" PRIx64 | |
| " but VkSwapchainCreateInfo::oldSwapchain=0x%" PRIx64, | |
| reinterpret_cast<uint64_t>(create_info->surface), | |
| reinterpret_cast<uint64_t>(surface.swapchain_handle), | |
| reinterpret_cast<uint64_t>(create_info->oldSwapchain)); | |
| return VK_ERROR_NATIVE_WINDOW_IN_USE_KHR; | |
| } | |
| if (create_info->oldSwapchain != VK_NULL_HANDLE) | |
| OrphanSwapchain(device, SwapchainFromHandle(create_info->oldSwapchain)); | |
| // -- Reset the native window -- | |
| // The native window might have been used previously, and had its properties | |
| // changed from defaults. That will affect the answer we get for queries | |
| // like MIN_UNDEQUED_BUFFERS. Reset to a known/default state before we | |
| // attempt such queries. | |
| // The native window only allows dequeueing all buffers before any have | |
| // been queued, since after that point at least one is assumed to be in | |
| // non-FREE state at any given time. Disconnecting and re-connecting | |
| // orphans the previous buffers, getting us back to the state where we can | |
| // dequeue all buffers. | |
| // | |
| // This is not necessary if the surface was never used previously. | |
| // | |
| // TODO(http://b/134186185) recycle swapchain images more efficiently | |
| ANativeWindow* window = surface.window.get(); | |
| if (surface.used_by_swapchain) { | |
| err = native_window_api_disconnect(window, NATIVE_WINDOW_API_EGL); | |
| ALOGW_IF(err != android::OK, | |
| "native_window_api_disconnect failed: %s (%d)", strerror(-err), | |
| err); | |
| err = native_window_api_connect(window, NATIVE_WINDOW_API_EGL); | |
| ALOGW_IF(err != android::OK, | |
| "native_window_api_connect failed: %s (%d)", strerror(-err), | |
| err); | |
| } | |
| err = | |
| window->perform(window, NATIVE_WINDOW_SET_DEQUEUE_TIMEOUT, nsecs_t{-1}); | |
| if (err != android::OK) { | |
| ALOGE("window->perform(SET_DEQUEUE_TIMEOUT) failed: %s (%d)", | |
| strerror(-err), err); | |
| return VK_ERROR_SURFACE_LOST_KHR; | |
| } | |
| int swap_interval = | |
| create_info->presentMode == VK_PRESENT_MODE_MAILBOX_KHR ? 0 : 1; | |
| err = window->setSwapInterval(window, swap_interval); | |
| if (err != android::OK) { | |
| ALOGE("native_window->setSwapInterval(1) failed: %s (%d)", | |
| strerror(-err), err); | |
| return VK_ERROR_SURFACE_LOST_KHR; | |
| } | |
| err = native_window_set_shared_buffer_mode(window, false); | |
| if (err != android::OK) { | |
| ALOGE("native_window_set_shared_buffer_mode(false) failed: %s (%d)", | |
| strerror(-err), err); | |
| return VK_ERROR_SURFACE_LOST_KHR; | |
| } | |
| err = native_window_set_auto_refresh(window, false); | |
| if (err != android::OK) { | |
| ALOGE("native_window_set_auto_refresh(false) failed: %s (%d)", | |
| strerror(-err), err); | |
| return VK_ERROR_SURFACE_LOST_KHR; | |
| } | |
| // -- Configure the native window -- | |
| const auto& dispatch = GetData(device).driver; | |
| err = native_window_set_buffers_format( | |
| window, static_cast<int>(native_pixel_format)); | |
| if (err != android::OK) { | |
| ALOGE("native_window_set_buffers_format(%s) failed: %s (%d)", | |
| toString(native_pixel_format).c_str(), strerror(-err), err); | |
| return VK_ERROR_SURFACE_LOST_KHR; | |
| } | |
| /* Respect consumer default dataspace upon HAL_DATASPACE_ARBITRARY. */ | |
| if (native_dataspace != DataSpace::ARBITRARY) { | |
| err = native_window_set_buffers_data_space( | |
| window, static_cast<android_dataspace_t>(native_dataspace)); | |
| if (err != android::OK) { | |
| ALOGE("native_window_set_buffers_data_space(%d) failed: %s (%d)", | |
| native_dataspace, strerror(-err), err); | |
| return VK_ERROR_SURFACE_LOST_KHR; | |
| } | |
| } | |
| err = native_window_set_buffers_dimensions( | |
| window, static_cast<int>(create_info->imageExtent.width), | |
| static_cast<int>(create_info->imageExtent.height)); | |
| if (err != android::OK) { | |
| ALOGE("native_window_set_buffers_dimensions(%d,%d) failed: %s (%d)", | |
| create_info->imageExtent.width, create_info->imageExtent.height, | |
| strerror(-err), err); | |
| return VK_ERROR_SURFACE_LOST_KHR; | |
| } | |
| // VkSwapchainCreateInfo::preTransform indicates the transformation the app | |
| // applied during rendering. native_window_set_transform() expects the | |
| // inverse: the transform the app is requesting that the compositor perform | |
| // during composition. With native windows, pre-transform works by rendering | |
| // with the same transform the compositor is applying (as in Vulkan), but | |
| // then requesting the inverse transform, so that when the compositor does | |
| // it's job the two transforms cancel each other out and the compositor ends | |
| // up applying an identity transform to the app's buffer. | |
| err = native_window_set_buffers_transform( | |
| window, InvertTransformToNative(create_info->preTransform)); | |
| if (err != android::OK) { | |
| ALOGE("native_window_set_buffers_transform(%d) failed: %s (%d)", | |
| InvertTransformToNative(create_info->preTransform), | |
| strerror(-err), err); | |
| return VK_ERROR_SURFACE_LOST_KHR; | |
| } | |
| err = native_window_set_scaling_mode( | |
| window, NATIVE_WINDOW_SCALING_MODE_SCALE_TO_WINDOW); | |
| if (err != android::OK) { | |
| ALOGE("native_window_set_scaling_mode(SCALE_TO_WINDOW) failed: %s (%d)", | |
| strerror(-err), err); | |
| return VK_ERROR_SURFACE_LOST_KHR; | |
| } | |
| VkSwapchainImageUsageFlagsANDROID swapchain_image_usage = 0; | |
| if (IsSharedPresentMode(create_info->presentMode)) { | |
| swapchain_image_usage |= VK_SWAPCHAIN_IMAGE_USAGE_SHARED_BIT_ANDROID; | |
| err = native_window_set_shared_buffer_mode(window, true); | |
| if (err != android::OK) { | |
| ALOGE("native_window_set_shared_buffer_mode failed: %s (%d)", strerror(-err), err); | |
| return VK_ERROR_SURFACE_LOST_KHR; | |
| } | |
| } | |
| if (create_info->presentMode == VK_PRESENT_MODE_SHARED_CONTINUOUS_REFRESH_KHR) { | |
| err = native_window_set_auto_refresh(window, true); | |
| if (err != android::OK) { | |
| ALOGE("native_window_set_auto_refresh failed: %s (%d)", strerror(-err), err); | |
| return VK_ERROR_SURFACE_LOST_KHR; | |
| } | |
| } | |
| int query_value; | |
| // TODO: Now that we are calling into GPDSC2 directly, this query may be redundant | |
| // the call to std::max(min_buffer_count, num_images) may be redundant as well | |
| err = window->query(window, NATIVE_WINDOW_MIN_UNDEQUEUED_BUFFERS, | |
| &query_value); | |
| if (err != android::OK || query_value < 0) { | |
| ALOGE("window->query failed: %s (%d) value=%d", strerror(-err), err, | |
| query_value); | |
| return VK_ERROR_SURFACE_LOST_KHR; | |
| } | |
| const uint32_t min_undequeued_buffers = static_cast<uint32_t>(query_value); | |
| // Lower layer insists that we have at least min_undequeued_buffers + 1 | |
| // buffers. This is wasteful and we'd like to relax it in the shared case, | |
| // but not all the pieces are in place for that to work yet. Note we only | |
| // lie to the lower layer--we don't want to give the app back a swapchain | |
| // with extra images (which they can't actually use!). | |
| const uint32_t min_buffer_count = min_undequeued_buffers + 1; | |
| // Call into GPDSC2 to get the minimum and maximum allowable buffer count for the surface of | |
| // interest. This step is only necessary if the app requests a number of images | |
| // (create_info->minImageCount) that is less or more than the surface capabilities. | |
| // An app should be calling GPDSC2 and using those values to set create_info, but in the | |
| // event that the app has hard-coded image counts an error can occur | |
| VkSurfacePresentModeEXT present_mode = { | |
| VK_STRUCTURE_TYPE_SURFACE_PRESENT_MODE_EXT, | |
| nullptr, | |
| create_info->presentMode | |
| }; | |
| VkPhysicalDeviceSurfaceInfo2KHR surface_info2 = { | |
| VK_STRUCTURE_TYPE_PHYSICAL_DEVICE_SURFACE_INFO_2_KHR, | |
| &present_mode, | |
| create_info->surface | |
| }; | |
| VkSurfaceCapabilities2KHR surface_capabilities2 = { | |
| VK_STRUCTURE_TYPE_SURFACE_CAPABILITIES_2_KHR, | |
| nullptr, | |
| {}, | |
| }; | |
| result = GetPhysicalDeviceSurfaceCapabilities2KHR(GetData(device).driver_physical_device, | |
| &surface_info2, &surface_capabilities2); | |
| uint32_t num_images = create_info->minImageCount; | |
| num_images = std::clamp(num_images, | |
| surface_capabilities2.surfaceCapabilities.minImageCount, | |
| surface_capabilities2.surfaceCapabilities.maxImageCount); | |
| const uint32_t buffer_count = std::max(min_buffer_count, num_images); | |
| err = native_window_set_buffer_count(window, buffer_count); | |
| if (err != android::OK) { | |
| ALOGE("native_window_set_buffer_count(%d) failed: %s (%d)", buffer_count, | |
| strerror(-err), err); | |
| return VK_ERROR_SURFACE_LOST_KHR; | |
| } | |
| // In shared mode the num_images must be one regardless of how many | |
| // buffers were allocated for the buffer queue. | |
| if (swapchain_image_usage & VK_SWAPCHAIN_IMAGE_USAGE_SHARED_BIT_ANDROID) { | |
| num_images = 1; | |
| } | |
| VkImageFormatListCreateInfo extra_mutable_formats = { | |
| .sType = VK_STRUCTURE_TYPE_IMAGE_FORMAT_LIST_CREATE_INFO_KHR, | |
| }; | |
| VkImageFormatListCreateInfo* extra_mutable_formats_ptr; | |
| // Look through the create_info pNext chain passed to createSwapchainKHR | |
| // for an image compression control struct. | |
| // if one is found AND the appropriate extensions are enabled, create a | |
| // VkImageCompressionControlEXT structure to pass on to VkImageCreateInfo | |
| // TODO check for imageCompressionControlSwapchain feature is enabled | |
| void* usage_info_pNext = nullptr; | |
| VkImageCompressionControlEXT image_compression = {}; | |
| const VkSwapchainCreateInfoKHR* create_infos = create_info; | |
| while (create_infos->pNext) { | |
| create_infos = reinterpret_cast<const VkSwapchainCreateInfoKHR*>(create_infos->pNext); | |
| switch (create_infos->sType) { | |
| case VK_STRUCTURE_TYPE_IMAGE_COMPRESSION_CONTROL_EXT: { | |
| const VkImageCompressionControlEXT* compression_infos = | |
| reinterpret_cast<const VkImageCompressionControlEXT*>(create_infos); | |
| image_compression = *compression_infos; | |
| image_compression.pNext = nullptr; | |
| usage_info_pNext = &image_compression; | |
| } break; | |
| case VK_STRUCTURE_TYPE_IMAGE_FORMAT_LIST_CREATE_INFO: { | |
| const VkImageFormatListCreateInfo* format_list = | |
| reinterpret_cast<const VkImageFormatListCreateInfo*>( | |
| create_infos); | |
| if (create_info->flags & | |
| VK_SWAPCHAIN_CREATE_MUTABLE_FORMAT_BIT_KHR) { | |
| if (format_list && format_list->viewFormatCount > 0 && | |
| format_list->pViewFormats) { | |
| extra_mutable_formats.viewFormatCount = | |
| format_list->viewFormatCount; | |
| extra_mutable_formats.pViewFormats = | |
| format_list->pViewFormats; | |
| extra_mutable_formats_ptr = &extra_mutable_formats; | |
| } else { | |
| ALOGE( | |
| "vk_swapchain_create_mutable_format_bit_khr was " | |
| "set during swapchain creation but no valid " | |
| "vkimageformatlistcreateinfo was found in the " | |
| "pnext chain"); | |
| return VK_ERROR_INITIALIZATION_FAILED; | |
| } | |
| } | |
| } break; | |
| default: | |
| // Ignore all other info structs | |
| break; | |
| } | |
| } | |
| // Get the appropriate native_usage for the images | |
| // Get the consumer usage | |
| uint64_t native_usage = surface.consumer_usage; | |
| // Determine if the swapchain is protected | |
| bool create_protected_swapchain = false; | |
| if (create_info->flags & VK_SWAPCHAIN_CREATE_PROTECTED_BIT_KHR) { | |
| create_protected_swapchain = true; | |
| native_usage |= BufferUsage::PROTECTED; | |
| } | |
| // Get the producer usage | |
| uint64_t producer_usage; | |
| result = getProducerUsage(device, create_info, swapchain_image_usage, create_protected_swapchain, &producer_usage); | |
| if (result != VK_SUCCESS) { | |
| return result; | |
| } | |
| native_usage |= producer_usage; | |
| err = native_window_set_usage(window, native_usage); | |
| if (err != android::OK) { | |
| ALOGE("native_window_set_usage failed: %s (%d)", strerror(-err), err); | |
| return VK_ERROR_SURFACE_LOST_KHR; | |
| } | |
| int transform_hint; | |
| err = window->query(window, NATIVE_WINDOW_TRANSFORM_HINT, &transform_hint); | |
| if (err != android::OK) { | |
| ALOGE("NATIVE_WINDOW_TRANSFORM_HINT query failed: %s (%d)", | |
| strerror(-err), err); | |
| return VK_ERROR_SURFACE_LOST_KHR; | |
| } | |
| int64_t refresh_duration; | |
| err = native_window_get_refresh_cycle_duration(window, &refresh_duration); | |
| if (err != android::OK) { | |
| ALOGE("native_window_get_refresh_cycle_duration query failed: %s (%d)", | |
| strerror(-err), err); | |
| return VK_ERROR_SURFACE_LOST_KHR; | |
| } | |
| // -- Allocate our Swapchain object -- | |
| // After this point, we must deallocate the swapchain on error. | |
| void* mem = allocator->pfnAllocation(allocator->pUserData, | |
| sizeof(Swapchain), alignof(Swapchain), | |
| VK_SYSTEM_ALLOCATION_SCOPE_OBJECT); | |
| if (!mem) | |
| return VK_ERROR_OUT_OF_HOST_MEMORY; | |
| Swapchain* swapchain = new (mem) | |
| Swapchain(surface, num_images, create_info->presentMode, | |
| TranslateVulkanToNativeTransform(create_info->preTransform), | |
| refresh_duration); | |
| VkSwapchainImageCreateInfoANDROID swapchain_image_create = { | |
| #pragma clang diagnostic push | |
| #pragma clang diagnostic ignored "-Wold-style-cast" | |
| .sType = VK_STRUCTURE_TYPE_SWAPCHAIN_IMAGE_CREATE_INFO_ANDROID, | |
| #pragma clang diagnostic pop | |
| .pNext = usage_info_pNext, | |
| .usage = swapchain_image_usage, | |
| }; | |
| VkNativeBufferANDROID image_native_buffer = { | |
| #pragma clang diagnostic push | |
| #pragma clang diagnostic ignored "-Wold-style-cast" | |
| .sType = VK_STRUCTURE_TYPE_NATIVE_BUFFER_ANDROID, | |
| #pragma clang diagnostic pop | |
| .pNext = &swapchain_image_create, | |
| }; | |
| VkImageCreateInfo image_create = { | |
| .sType = VK_STRUCTURE_TYPE_IMAGE_CREATE_INFO, | |
| .pNext = nullptr, | |
| .flags = create_protected_swapchain ? VK_IMAGE_CREATE_PROTECTED_BIT : 0u, | |
| .imageType = VK_IMAGE_TYPE_2D, | |
| .format = create_info->imageFormat, | |
| .extent = { | |
| create_info->imageExtent.width, | |
| create_info->imageExtent.height, | |
| 1 | |
| }, | |
| .mipLevels = 1, | |
| .arrayLayers = 1, | |
| .samples = VK_SAMPLE_COUNT_1_BIT, | |
| .tiling = VK_IMAGE_TILING_OPTIMAL, | |
| .usage = create_info->imageUsage, | |
| .sharingMode = create_info->imageSharingMode, | |
| .queueFamilyIndexCount = create_info->queueFamilyIndexCount, | |
| .pQueueFamilyIndices = create_info->pQueueFamilyIndices, | |
| }; | |
| if (create_info->flags & VK_SWAPCHAIN_CREATE_MUTABLE_FORMAT_BIT_KHR) { | |
| image_create.flags |= VK_IMAGE_CREATE_MUTABLE_FORMAT_BIT; | |
| image_create.flags |= VK_IMAGE_CREATE_EXTENDED_USAGE_BIT_KHR; | |
| } | |
| // Note: don't do deferred allocation for shared present modes. There's only one buffer | |
| // involved so very little benefit. | |
| if ((create_info->flags & VK_SWAPCHAIN_CREATE_DEFERRED_MEMORY_ALLOCATION_BIT_EXT) && | |
| !IsSharedPresentMode(create_info->presentMode)) { | |
| // Don't want to touch the underlying gralloc buffers yet; | |
| // instead just create unbound VkImages which will later be bound to memory inside | |
| // AcquireNextImage. | |
| VkImageSwapchainCreateInfoKHR image_swapchain_create = { | |
| .sType = VK_STRUCTURE_TYPE_IMAGE_SWAPCHAIN_CREATE_INFO_KHR, | |
| .pNext = extra_mutable_formats_ptr, | |
| .swapchain = HandleFromSwapchain(swapchain), | |
| }; | |
| image_create.pNext = &image_swapchain_create; | |
| for (uint32_t i = 0; i < num_images; i++) { | |
| Swapchain::Image& img = swapchain->images[i]; | |
| img.buffer = nullptr; | |
| img.dequeued = false; | |
| result = dispatch.CreateImage(device, &image_create, nullptr, &img.image); | |
| if (result != VK_SUCCESS) { | |
| ALOGD("vkCreateImage w/ for deferred swapchain image failed: %u", result); | |
| break; | |
| } | |
| } | |
| } else { | |
| // -- Dequeue all buffers and create a VkImage for each -- | |
| // Any failures during or after this must cancel the dequeued buffers. | |
| for (uint32_t i = 0; i < num_images; i++) { | |
| Swapchain::Image& img = swapchain->images[i]; | |
| ANativeWindowBuffer* buffer; | |
| err = window->dequeueBuffer(window, &buffer, &img.dequeue_fence); | |
| if (err != android::OK) { | |
| ALOGE("dequeueBuffer[%u] failed: %s (%d)", i, strerror(-err), err); | |
| switch (-err) { | |
| case ENOMEM: | |
| result = VK_ERROR_OUT_OF_DEVICE_MEMORY; | |
| break; | |
| default: | |
| result = VK_ERROR_SURFACE_LOST_KHR; | |
| break; | |
| } | |
| break; | |
| } | |
| img.buffer = buffer; | |
| img.dequeued = true; | |
| image_native_buffer.handle = img.buffer->handle; | |
| image_native_buffer.stride = img.buffer->stride; | |
| image_native_buffer.format = img.buffer->format; | |
| image_native_buffer.usage = int(img.buffer->usage); | |
| android_convertGralloc0To1Usage(int(img.buffer->usage), | |
| &image_native_buffer.usage2.producer, | |
| &image_native_buffer.usage2.consumer); | |
| image_native_buffer.usage3 = img.buffer->usage; | |
| image_native_buffer.ahb = | |
| ANativeWindowBuffer_getHardwareBuffer(img.buffer.get()); | |
| image_create.pNext = &image_native_buffer; | |
| if (extra_mutable_formats_ptr) { | |
| extra_mutable_formats_ptr->pNext = image_create.pNext; | |
| image_create.pNext = extra_mutable_formats_ptr; | |
| } | |
| ATRACE_BEGIN("CreateImage"); | |
| result = | |
| dispatch.CreateImage(device, &image_create, nullptr, &img.image); | |
| ATRACE_END(); | |
| if (result != VK_SUCCESS) { | |
| ALOGD("vkCreateImage w/ native buffer failed: %u", result); | |
| break; | |
| } | |
| } | |
| // -- Cancel all buffers, returning them to the queue -- | |
| // If an error occurred before, also destroy the VkImage and release the | |
| // buffer reference. Otherwise, we retain a strong reference to the buffer. | |
| for (uint32_t i = 0; i < num_images; i++) { | |
| Swapchain::Image& img = swapchain->images[i]; | |
| if (img.dequeued) { | |
| if (!swapchain->shared) { | |
| window->cancelBuffer(window, img.buffer.get(), | |
| img.dequeue_fence); | |
| img.dequeue_fence = -1; | |
| img.dequeued = false; | |
| } | |
| } | |
| } | |
| } | |
| if (result != VK_SUCCESS) { | |
| DestroySwapchainInternal(device, HandleFromSwapchain(swapchain), | |
| allocator); | |
| return result; | |
| } | |
| if (transform_hint != swapchain->pre_transform) { | |
| // Log that the app is not doing pre-rotation. | |
| android::GraphicsEnv::getInstance().setTargetStats( | |
| android::GpuStatsInfo::Stats::FALSE_PREROTATION); | |
| } | |
| // Set stats for creating a Vulkan swapchain | |
| android::GraphicsEnv::getInstance().setTargetStats( | |
| android::GpuStatsInfo::Stats::CREATED_VULKAN_SWAPCHAIN); | |
| surface.used_by_swapchain = true; | |
| surface.swapchain_handle = HandleFromSwapchain(swapchain); | |
| *swapchain_handle = surface.swapchain_handle; | |
| return VK_SUCCESS; | |
| } | |
| VKAPI_ATTR | |
| void DestroySwapchainKHR(VkDevice device, | |
| VkSwapchainKHR swapchain_handle, | |
| const VkAllocationCallbacks* allocator) { | |
| ATRACE_CALL(); | |
| DestroySwapchainInternal(device, swapchain_handle, allocator); | |
| } | |
| VKAPI_ATTR | |
| VkResult GetSwapchainImagesKHR(VkDevice, | |
| VkSwapchainKHR swapchain_handle, | |
| uint32_t* count, | |
| VkImage* images) { | |
| ATRACE_CALL(); | |
| Swapchain& swapchain = *SwapchainFromHandle(swapchain_handle); | |
| ALOGW_IF(swapchain.surface.swapchain_handle != swapchain_handle, | |
| "getting images for non-active swapchain 0x%" PRIx64 | |
| "; only dequeued image handles are valid", | |
| reinterpret_cast<uint64_t>(swapchain_handle)); | |
| VkResult result = VK_SUCCESS; | |
| if (images) { | |
| uint32_t n = swapchain.num_images; | |
| if (*count < swapchain.num_images) { | |
| n = *count; | |
| result = VK_INCOMPLETE; | |
| } | |
| for (uint32_t i = 0; i < n; i++) | |
| images[i] = swapchain.images[i].image; | |
| *count = n; | |
| } else { | |
| *count = swapchain.num_images; | |
| } | |
| return result; | |
| } | |
| VKAPI_ATTR | |
| VkResult AcquireNextImageKHR(VkDevice device, | |
| VkSwapchainKHR swapchain_handle, | |
| uint64_t timeout, | |
| VkSemaphore semaphore, | |
| VkFence vk_fence, | |
| uint32_t* image_index) { | |
| ATRACE_CALL(); | |
| Swapchain& swapchain = *SwapchainFromHandle(swapchain_handle); | |
| ANativeWindow* window = swapchain.surface.window.get(); | |
| VkResult result; | |
| int err; | |
| if (swapchain.surface.swapchain_handle != swapchain_handle) | |
| return VK_ERROR_OUT_OF_DATE_KHR; | |
| if (swapchain.shared) { | |
| // In shared mode, we keep the buffer dequeued all the time, so we don't | |
| // want to dequeue a buffer here. Instead, just ask the driver to ensure | |
| // the semaphore and fence passed to us will be signalled. | |
| *image_index = 0; | |
| result = GetData(device).driver.AcquireImageANDROID( | |
| device, swapchain.images[*image_index].image, -1, semaphore, vk_fence); | |
| return result; | |
| } | |
| const nsecs_t acquire_next_image_timeout = | |
| timeout > (uint64_t)std::numeric_limits<nsecs_t>::max() ? -1 : timeout; | |
| if (acquire_next_image_timeout != swapchain.acquire_next_image_timeout) { | |
| // Cache the timeout to avoid the duplicate binder cost. | |
| err = window->perform(window, NATIVE_WINDOW_SET_DEQUEUE_TIMEOUT, | |
| acquire_next_image_timeout); | |
| if (err != android::OK) { | |
| ALOGE("window->perform(SET_DEQUEUE_TIMEOUT) failed: %s (%d)", | |
| strerror(-err), err); | |
| return VK_ERROR_SURFACE_LOST_KHR; | |
| } | |
| swapchain.acquire_next_image_timeout = acquire_next_image_timeout; | |
| } | |
| ANativeWindowBuffer* buffer; | |
| int fence_fd; | |
| err = window->dequeueBuffer(window, &buffer, &fence_fd); | |
| if (err == android::TIMED_OUT || err == android::INVALID_OPERATION) { | |
| ALOGW("dequeueBuffer timed out: %s (%d)", strerror(-err), err); | |
| return timeout ? VK_TIMEOUT : VK_NOT_READY; | |
| } else if (err != android::OK) { | |
| ALOGE("dequeueBuffer failed: %s (%d)", strerror(-err), err); | |
| return VK_ERROR_SURFACE_LOST_KHR; | |
| } | |
| uint32_t idx; | |
| for (idx = 0; idx < swapchain.num_images; idx++) { | |
| if (swapchain.images[idx].buffer.get() == buffer) { | |
| swapchain.images[idx].dequeued = true; | |
| swapchain.images[idx].dequeue_fence = fence_fd; | |
| break; | |
| } | |
| } | |
| // If this is a deferred alloc swapchain, this may be the first time we've | |
| // seen a particular buffer. If so, there should be an empty slot. Find it, | |
| // and bind the gralloc buffer to the VkImage for that slot. If there is no | |
| // empty slot, then we dequeued an unexpected buffer. Non-deferred swapchains | |
| // will also take this path, but will never have an empty slot since we | |
| // populated them all upfront. | |
| if (idx == swapchain.num_images) { | |
| for (idx = 0; idx < swapchain.num_images; idx++) { | |
| if (!swapchain.images[idx].buffer) { | |
| // Note: this structure is technically required for | |
| // Vulkan correctness, even though the driver is probably going | |
| // to use everything from the VkNativeBufferANDROID below. | |
| // This is kindof silly, but it's how we did the ANB | |
| // side of VK_KHR_swapchain v69, so we're stuck with it unless | |
| // we want to go tinkering with the ANB spec some more. | |
| VkBindImageMemorySwapchainInfoKHR bimsi = { | |
| .sType = VK_STRUCTURE_TYPE_BIND_IMAGE_MEMORY_SWAPCHAIN_INFO_KHR, | |
| .pNext = nullptr, | |
| .swapchain = swapchain_handle, | |
| .imageIndex = idx, | |
| }; | |
| VkNativeBufferANDROID nb = { | |
| .sType = VK_STRUCTURE_TYPE_NATIVE_BUFFER_ANDROID, | |
| .pNext = &bimsi, | |
| .handle = buffer->handle, | |
| .stride = buffer->stride, | |
| .format = buffer->format, | |
| .usage = int(buffer->usage), | |
| .usage3 = buffer->usage, | |
| .ahb = ANativeWindowBuffer_getHardwareBuffer(buffer), | |
| }; | |
| android_convertGralloc0To1Usage(int(buffer->usage), | |
| &nb.usage2.producer, | |
| &nb.usage2.consumer); | |
| VkBindImageMemoryInfo bimi = { | |
| .sType = VK_STRUCTURE_TYPE_BIND_IMAGE_MEMORY_INFO, | |
| .pNext = &nb, | |
| .image = swapchain.images[idx].image, | |
| .memory = VK_NULL_HANDLE, | |
| .memoryOffset = 0, | |
| }; | |
| result = GetData(device).driver.BindImageMemory2(device, 1, &bimi); | |
| if (result != VK_SUCCESS) { | |
| // This shouldn't really happen. If it does, something is probably | |
| // unrecoverably wrong with the swapchain and its images. Cancel | |
| // the buffer and declare the swapchain broken. | |
| ALOGE("failed to do deferred gralloc buffer bind"); | |
| window->cancelBuffer(window, buffer, fence_fd); | |
| return VK_ERROR_OUT_OF_DATE_KHR; | |
| } | |
| swapchain.images[idx].dequeued = true; | |
| swapchain.images[idx].dequeue_fence = fence_fd; | |
| swapchain.images[idx].buffer = buffer; | |
| break; | |
| } | |
| } | |
| } | |
| // The buffer doesn't match any slot. This shouldn't normally happen, but is | |
| // possible if the bufferqueue is reconfigured behind libvulkan's back. If this | |
| // happens, just declare the swapchain to be broken and the app will recreate it. | |
| if (idx == swapchain.num_images) { | |
| ALOGE("dequeueBuffer returned unrecognized buffer"); | |
| window->cancelBuffer(window, buffer, fence_fd); | |
| return VK_ERROR_OUT_OF_DATE_KHR; | |
| } | |
| int fence_clone = -1; | |
| if (fence_fd != -1) { | |
| fence_clone = dup(fence_fd); | |
| if (fence_clone == -1) { | |
| ALOGE("dup(fence) failed, stalling until signalled: %s (%d)", | |
| strerror(errno), errno); | |
| sync_wait(fence_fd, -1 /* forever */); | |
| } | |
| } | |
| result = GetData(device).driver.AcquireImageANDROID( | |
| device, swapchain.images[idx].image, fence_clone, semaphore, vk_fence); | |
| if (result != VK_SUCCESS) { | |
| // NOTE: we're relying on AcquireImageANDROID to close fence_clone, | |
| // even if the call fails. We could close it ourselves on failure, but | |
| // that would create a race condition if the driver closes it on a | |
| // failure path: some other thread might create an fd with the same | |
| // number between the time the driver closes it and the time we close | |
| // it. We must assume one of: the driver *always* closes it even on | |
| // failure, or *never* closes it on failure. | |
| window->cancelBuffer(window, buffer, fence_fd); | |
| swapchain.images[idx].dequeued = false; | |
| swapchain.images[idx].dequeue_fence = -1; | |
| return result; | |
| } | |
| *image_index = idx; | |
| return VK_SUCCESS; | |
| } | |
| VKAPI_ATTR | |
| VkResult AcquireNextImage2KHR(VkDevice device, | |
| const VkAcquireNextImageInfoKHR* pAcquireInfo, | |
| uint32_t* pImageIndex) { | |
| ATRACE_CALL(); | |
| return AcquireNextImageKHR(device, pAcquireInfo->swapchain, | |
| pAcquireInfo->timeout, pAcquireInfo->semaphore, | |
| pAcquireInfo->fence, pImageIndex); | |
| } | |
| static VkResult WorstPresentResult(VkResult a, VkResult b) { | |
| // See the error ranking for vkQueuePresentKHR at the end of section 29.6 | |
| // (in spec version 1.0.14). | |
| static const VkResult kWorstToBest[] = { | |
| VK_ERROR_DEVICE_LOST, | |
| VK_ERROR_SURFACE_LOST_KHR, | |
| VK_ERROR_OUT_OF_DATE_KHR, | |
| VK_ERROR_OUT_OF_DEVICE_MEMORY, | |
| VK_ERROR_OUT_OF_HOST_MEMORY, | |
| VK_SUBOPTIMAL_KHR, | |
| }; | |
| for (auto result : kWorstToBest) { | |
| if (a == result || b == result) | |
| return result; | |
| } | |
| ALOG_ASSERT(a == VK_SUCCESS, "invalid vkQueuePresentKHR result %d", a); | |
| ALOG_ASSERT(b == VK_SUCCESS, "invalid vkQueuePresentKHR result %d", b); | |
| return a != VK_SUCCESS ? a : b; | |
| } | |
| // KHR_incremental_present aspect of QueuePresentKHR | |
| static void SetSwapchainSurfaceDamage(ANativeWindow *window, const VkPresentRegionKHR *pRegion) { | |
| std::vector<android_native_rect_t> rects(pRegion->rectangleCount); | |
| for (auto i = 0u; i < pRegion->rectangleCount; i++) { | |
| auto const& rect = pRegion->pRectangles[i]; | |
| if (rect.layer > 0) { | |
| ALOGV("vkQueuePresentKHR ignoring invalid layer (%u); using layer 0 instead", | |
| rect.layer); | |
| } | |
| rects[i].left = rect.offset.x; | |
| rects[i].bottom = rect.offset.y; | |
| rects[i].right = rect.offset.x + rect.extent.width; | |
| rects[i].top = rect.offset.y + rect.extent.height; | |
| } | |
| native_window_set_surface_damage(window, rects.data(), rects.size()); | |
| } | |
| // GOOGLE_display_timing aspect of QueuePresentKHR | |
| static void SetSwapchainFrameTimestamp(Swapchain &swapchain, const VkPresentTimeGOOGLE *pTime) { | |
| ANativeWindow *window = swapchain.surface.window.get(); | |
| // We don't know whether the app will actually use GOOGLE_display_timing | |
| // with a particular swapchain until QueuePresent; enable it on the BQ | |
| // now if needed | |
| if (!swapchain.frame_timestamps_enabled) { | |
| ALOGV("Calling native_window_enable_frame_timestamps(true)"); | |
| native_window_enable_frame_timestamps(window, true); | |
| swapchain.frame_timestamps_enabled = true; | |
| } | |
| // Record the nativeFrameId so it can be later correlated to | |
| // this present. | |
| uint64_t nativeFrameId = 0; | |
| int err = native_window_get_next_frame_id( | |
| window, &nativeFrameId); | |
| if (err != android::OK) { | |
| ALOGE("Failed to get next native frame ID."); | |
| } | |
| // Add a new timing record with the user's presentID and | |
| // the nativeFrameId. | |
| swapchain.timing.emplace_back(pTime, nativeFrameId); | |
| if (swapchain.timing.size() > MAX_TIMING_INFOS) { | |
| swapchain.timing.erase( | |
| swapchain.timing.begin(), | |
| swapchain.timing.begin() + swapchain.timing.size() - MAX_TIMING_INFOS); | |
| } | |
| if (pTime->desiredPresentTime) { | |
| ALOGV( | |
| "Calling native_window_set_buffers_timestamp(%" PRId64 ")", | |
| pTime->desiredPresentTime); | |
| native_window_set_buffers_timestamp( | |
| window, | |
| static_cast<int64_t>(pTime->desiredPresentTime)); | |
| } | |
| } | |
| // EXT_swapchain_maintenance1 present mode change | |
| static bool SetSwapchainPresentMode(ANativeWindow *window, VkPresentModeKHR mode) { | |
| // There is no dynamic switching between non-shared present modes. | |
| // All we support is switching between demand and continuous refresh. | |
| if (!IsSharedPresentMode(mode)) | |
| return true; | |
| int err = native_window_set_auto_refresh(window, | |
| mode == VK_PRESENT_MODE_SHARED_CONTINUOUS_REFRESH_KHR); | |
| if (err != android::OK) { | |
| ALOGE("native_window_set_auto_refresh() failed: %s (%d)", | |
| strerror(-err), err); | |
| return false; | |
| } | |
| return true; | |
| } | |
| static VkResult PresentOneSwapchain( | |
| VkQueue queue, | |
| Swapchain& swapchain, | |
| uint32_t imageIndex, | |
| const VkPresentRegionKHR *pRegion, | |
| const VkPresentTimeGOOGLE *pTime, | |
| VkFence presentFence, | |
| const VkPresentModeKHR *pPresentMode, | |
| uint32_t waitSemaphoreCount, | |
| const VkSemaphore *pWaitSemaphores) { | |
| VkDevice device = GetData(queue).driver_device; | |
| const auto& dispatch = GetData(queue).driver; | |
| Swapchain::Image& img = swapchain.images[imageIndex]; | |
| VkResult swapchain_result = VK_SUCCESS; | |
| VkResult result; | |
| int err; | |
| // XXX: long standing issue: QueueSignalReleaseImageANDROID consumes the | |
| // wait semaphores, so this doesn't actually work for the multiple swapchain | |
| // case. | |
| int fence = -1; | |
| result = dispatch.QueueSignalReleaseImageANDROID( | |
| queue, waitSemaphoreCount, | |
| pWaitSemaphores, img.image, &fence); | |
| if (result != VK_SUCCESS) { | |
| ALOGE("QueueSignalReleaseImageANDROID failed: %d", result); | |
| swapchain_result = result; | |
| } | |
| if (img.release_fence >= 0) | |
| close(img.release_fence); | |
| img.release_fence = fence < 0 ? -1 : dup(fence); | |
| if (swapchain.surface.swapchain_handle == HandleFromSwapchain(&swapchain)) { | |
| ANativeWindow* window = swapchain.surface.window.get(); | |
| if (swapchain_result == VK_SUCCESS) { | |
| if (presentFence != VK_NULL_HANDLE) { | |
| int fence_copy = fence < 0 ? -1 : dup(fence); | |
| VkImportFenceFdInfoKHR iffi = { | |
| VK_STRUCTURE_TYPE_IMPORT_FENCE_FD_INFO_KHR, | |
| nullptr, | |
| presentFence, | |
| VK_FENCE_IMPORT_TEMPORARY_BIT, | |
| VK_EXTERNAL_FENCE_HANDLE_TYPE_SYNC_FD_BIT, | |
| fence_copy, | |
| }; | |
| if (VK_SUCCESS != dispatch.ImportFenceFdKHR(device, &iffi) && fence_copy >= 0) { | |
| // ImportFenceFdKHR takes ownership only if it succeeds | |
| close(fence_copy); | |
| } | |
| } | |
| if (pRegion) { | |
| SetSwapchainSurfaceDamage(window, pRegion); | |
| } | |
| if (pTime) { | |
| SetSwapchainFrameTimestamp(swapchain, pTime); | |
| } | |
| if (pPresentMode) { | |
| if (!SetSwapchainPresentMode(window, *pPresentMode)) | |
| swapchain_result = WorstPresentResult(swapchain_result, | |
| VK_ERROR_SURFACE_LOST_KHR); | |
| } | |
| err = window->queueBuffer(window, img.buffer.get(), fence); | |
| // queueBuffer always closes fence, even on error | |
| if (err != android::OK) { | |
| ALOGE("queueBuffer failed: %s (%d)", strerror(-err), err); | |
| swapchain_result = WorstPresentResult( | |
| swapchain_result, VK_ERROR_SURFACE_LOST_KHR); | |
| } else { | |
| if (img.dequeue_fence >= 0) { | |
| close(img.dequeue_fence); | |
| img.dequeue_fence = -1; | |
| } | |
| img.dequeued = false; | |
| } | |
| // If the swapchain is in shared mode, immediately dequeue the | |
| // buffer so it can be presented again without an intervening | |
| // call to AcquireNextImageKHR. We expect to get the same buffer | |
| // back from every call to dequeueBuffer in this mode. | |
| if (swapchain.shared && swapchain_result == VK_SUCCESS) { | |
| ANativeWindowBuffer* buffer; | |
| int fence_fd; | |
| err = window->dequeueBuffer(window, &buffer, &fence_fd); | |
| if (err != android::OK) { | |
| ALOGE("dequeueBuffer failed: %s (%d)", strerror(-err), err); | |
| swapchain_result = WorstPresentResult(swapchain_result, | |
| VK_ERROR_SURFACE_LOST_KHR); | |
| } else if (img.buffer != buffer) { | |
| ALOGE("got wrong image back for shared swapchain"); | |
| swapchain_result = WorstPresentResult(swapchain_result, | |
| VK_ERROR_SURFACE_LOST_KHR); | |
| } else { | |
| img.dequeue_fence = fence_fd; | |
| img.dequeued = true; | |
| } | |
| } | |
| } | |
| if (swapchain_result != VK_SUCCESS) { | |
| OrphanSwapchain(device, &swapchain); | |
| } | |
| // Android will only return VK_SUBOPTIMAL_KHR for vkQueuePresentKHR, | |
| // and only when the window's transform/rotation changes. Extent | |
| // changes will not cause VK_SUBOPTIMAL_KHR because of the | |
| // application issues that were caused when the following transform | |
| // change was added. | |
| int window_transform_hint; | |
| err = window->query(window, NATIVE_WINDOW_TRANSFORM_HINT, | |
| &window_transform_hint); | |
| if (err != android::OK) { | |
| ALOGE("NATIVE_WINDOW_TRANSFORM_HINT query failed: %s (%d)", | |
| strerror(-err), err); | |
| swapchain_result = WorstPresentResult( | |
| swapchain_result, VK_ERROR_SURFACE_LOST_KHR); | |
| } | |
| if (swapchain.pre_transform != window_transform_hint) { | |
| swapchain_result = | |
| WorstPresentResult(swapchain_result, VK_SUBOPTIMAL_KHR); | |
| } | |
| } else { | |
| ReleaseSwapchainImage(device, swapchain.shared, nullptr, fence, | |
| img, true); | |
| swapchain_result = VK_ERROR_OUT_OF_DATE_KHR; | |
| } | |
| return swapchain_result; | |
| } | |
| VKAPI_ATTR | |
| VkResult QueuePresentKHR(VkQueue queue, const VkPresentInfoKHR* present_info) { | |
| ATRACE_CALL(); | |
| ALOGV_IF(present_info->sType != VK_STRUCTURE_TYPE_PRESENT_INFO_KHR, | |
| "vkQueuePresentKHR: invalid VkPresentInfoKHR structure type %d", | |
| present_info->sType); | |
| VkResult final_result = VK_SUCCESS; | |
| // Look at the pNext chain for supported extension structs: | |
| const VkPresentRegionsKHR* present_regions = nullptr; | |
| const VkPresentTimesInfoGOOGLE* present_times = nullptr; | |
| const VkSwapchainPresentFenceInfoEXT* present_fences = nullptr; | |
| const VkSwapchainPresentModeInfoEXT* present_modes = nullptr; | |
| const VkPresentRegionsKHR* next = | |
| reinterpret_cast<const VkPresentRegionsKHR*>(present_info->pNext); | |
| while (next) { | |
| switch (next->sType) { | |
| case VK_STRUCTURE_TYPE_PRESENT_REGIONS_KHR: | |
| present_regions = next; | |
| break; | |
| case VK_STRUCTURE_TYPE_PRESENT_TIMES_INFO_GOOGLE: | |
| present_times = | |
| reinterpret_cast<const VkPresentTimesInfoGOOGLE*>(next); | |
| break; | |
| case VK_STRUCTURE_TYPE_SWAPCHAIN_PRESENT_FENCE_INFO_EXT: | |
| present_fences = | |
| reinterpret_cast<const VkSwapchainPresentFenceInfoEXT*>(next); | |
| break; | |
| case VK_STRUCTURE_TYPE_SWAPCHAIN_PRESENT_MODE_INFO_EXT: | |
| present_modes = | |
| reinterpret_cast<const VkSwapchainPresentModeInfoEXT*>(next); | |
| break; | |
| default: | |
| ALOGV("QueuePresentKHR ignoring unrecognized pNext->sType = %x", | |
| next->sType); | |
| break; | |
| } | |
| next = reinterpret_cast<const VkPresentRegionsKHR*>(next->pNext); | |
| } | |
| ALOGV_IF( | |
| present_regions && | |
| present_regions->swapchainCount != present_info->swapchainCount, | |
| "VkPresentRegions::swapchainCount != VkPresentInfo::swapchainCount"); | |
| ALOGV_IF(present_times && | |
| present_times->swapchainCount != present_info->swapchainCount, | |
| "VkPresentTimesInfoGOOGLE::swapchainCount != " | |
| "VkPresentInfo::swapchainCount"); | |
| ALOGV_IF(present_fences && | |
| present_fences->swapchainCount != present_info->swapchainCount, | |
| "VkSwapchainPresentFenceInfoEXT::swapchainCount != " | |
| "VkPresentInfo::swapchainCount"); | |
| ALOGV_IF(present_modes && | |
| present_modes->swapchainCount != present_info->swapchainCount, | |
| "VkSwapchainPresentModeInfoEXT::swapchainCount != " | |
| "VkPresentInfo::swapchainCount"); | |
| const VkPresentRegionKHR* regions = | |
| (present_regions) ? present_regions->pRegions : nullptr; | |
| const VkPresentTimeGOOGLE* times = | |
| (present_times) ? present_times->pTimes : nullptr; | |
| for (uint32_t sc = 0; sc < present_info->swapchainCount; sc++) { | |
| Swapchain& swapchain = | |
| *SwapchainFromHandle(present_info->pSwapchains[sc]); | |
| VkResult swapchain_result = PresentOneSwapchain( | |
| queue, | |
| swapchain, | |
| present_info->pImageIndices[sc], | |
| (regions && !swapchain.mailbox_mode) ? ®ions[sc] : nullptr, | |
| times ? ×[sc] : nullptr, | |
| present_fences ? present_fences->pFences[sc] : VK_NULL_HANDLE, | |
| present_modes ? &present_modes->pPresentModes[sc] : nullptr, | |
| present_info->waitSemaphoreCount, | |
| present_info->pWaitSemaphores); | |
| if (present_info->pResults) | |
| present_info->pResults[sc] = swapchain_result; | |
| if (swapchain_result != final_result) | |
| final_result = WorstPresentResult(final_result, swapchain_result); | |
| } | |
| return final_result; | |
| } | |
| VKAPI_ATTR | |
| VkResult GetRefreshCycleDurationGOOGLE( | |
| VkDevice, | |
| VkSwapchainKHR swapchain_handle, | |
| VkRefreshCycleDurationGOOGLE* pDisplayTimingProperties) { | |
| ATRACE_CALL(); | |
| Swapchain& swapchain = *SwapchainFromHandle(swapchain_handle); | |
| VkResult result = swapchain.get_refresh_duration(pDisplayTimingProperties->refreshDuration); | |
| return result; | |
| } | |
| VKAPI_ATTR | |
| VkResult GetPastPresentationTimingGOOGLE( | |
| VkDevice, | |
| VkSwapchainKHR swapchain_handle, | |
| uint32_t* count, | |
| VkPastPresentationTimingGOOGLE* timings) { | |
| ATRACE_CALL(); | |
| Swapchain& swapchain = *SwapchainFromHandle(swapchain_handle); | |
| if (swapchain.surface.swapchain_handle != swapchain_handle) { | |
| return VK_ERROR_OUT_OF_DATE_KHR; | |
| } | |
| ANativeWindow* window = swapchain.surface.window.get(); | |
| VkResult result = VK_SUCCESS; | |
| if (!swapchain.frame_timestamps_enabled) { | |
| ALOGV("Calling native_window_enable_frame_timestamps(true)"); | |
| native_window_enable_frame_timestamps(window, true); | |
| swapchain.frame_timestamps_enabled = true; | |
| } | |
| if (timings) { | |
| // Get the latest ready timing count before copying, since the copied | |
| // timing info will be erased in copy_ready_timings function. | |
| uint32_t n = get_num_ready_timings(swapchain); | |
| copy_ready_timings(swapchain, count, timings); | |
| // Check the *count here against the recorded ready timing count, since | |
| // *count can be overwritten per spec describes. | |
| if (*count < n) { | |
| result = VK_INCOMPLETE; | |
| } | |
| } else { | |
| *count = get_num_ready_timings(swapchain); | |
| } | |
| return result; | |
| } | |
| VKAPI_ATTR | |
| VkResult GetSwapchainStatusKHR( | |
| VkDevice, | |
| VkSwapchainKHR swapchain_handle) { | |
| ATRACE_CALL(); | |
| Swapchain& swapchain = *SwapchainFromHandle(swapchain_handle); | |
| VkResult result = VK_SUCCESS; | |
| if (swapchain.surface.swapchain_handle != swapchain_handle) { | |
| return VK_ERROR_OUT_OF_DATE_KHR; | |
| } | |
| // TODO(b/143296009): Implement this function properly | |
| return result; | |
| } | |
| VKAPI_ATTR void SetHdrMetadataEXT( | |
| VkDevice, | |
| uint32_t swapchainCount, | |
| const VkSwapchainKHR* pSwapchains, | |
| const VkHdrMetadataEXT* pHdrMetadataEXTs) { | |
| ATRACE_CALL(); | |
| for (uint32_t idx = 0; idx < swapchainCount; idx++) { | |
| Swapchain* swapchain = SwapchainFromHandle(pSwapchains[idx]); | |
| if (!swapchain) | |
| continue; | |
| if (swapchain->surface.swapchain_handle != pSwapchains[idx]) continue; | |
| ANativeWindow* window = swapchain->surface.window.get(); | |
| VkHdrMetadataEXT vulkanMetadata = pHdrMetadataEXTs[idx]; | |
| const android_smpte2086_metadata smpteMetdata = { | |
| {vulkanMetadata.displayPrimaryRed.x, | |
| vulkanMetadata.displayPrimaryRed.y}, | |
| {vulkanMetadata.displayPrimaryGreen.x, | |
| vulkanMetadata.displayPrimaryGreen.y}, | |
| {vulkanMetadata.displayPrimaryBlue.x, | |
| vulkanMetadata.displayPrimaryBlue.y}, | |
| {vulkanMetadata.whitePoint.x, vulkanMetadata.whitePoint.y}, | |
| vulkanMetadata.maxLuminance, | |
| vulkanMetadata.minLuminance}; | |
| native_window_set_buffers_smpte2086_metadata(window, &smpteMetdata); | |
| const android_cta861_3_metadata cta8613Metadata = { | |
| vulkanMetadata.maxContentLightLevel, | |
| vulkanMetadata.maxFrameAverageLightLevel}; | |
| native_window_set_buffers_cta861_3_metadata(window, &cta8613Metadata); | |
| } | |
| return; | |
| } | |
| static void InterceptBindImageMemory2( | |
| uint32_t bind_info_count, | |
| const VkBindImageMemoryInfo* bind_infos, | |
| std::vector<VkNativeBufferANDROID>* out_native_buffers, | |
| std::vector<VkBindImageMemoryInfo>* out_bind_infos) { | |
| out_native_buffers->clear(); | |
| out_bind_infos->clear(); | |
| if (!bind_info_count) | |
| return; | |
| std::unordered_set<uint32_t> intercepted_indexes; | |
| for (uint32_t idx = 0; idx < bind_info_count; idx++) { | |
| auto info = reinterpret_cast<const VkBindImageMemorySwapchainInfoKHR*>( | |
| bind_infos[idx].pNext); | |
| while (info && | |
| info->sType != | |
| VK_STRUCTURE_TYPE_BIND_IMAGE_MEMORY_SWAPCHAIN_INFO_KHR) { | |
| info = reinterpret_cast<const VkBindImageMemorySwapchainInfoKHR*>( | |
| info->pNext); | |
| } | |
| if (!info) | |
| continue; | |
| ALOG_ASSERT(info->swapchain != VK_NULL_HANDLE, | |
| "swapchain handle must not be NULL"); | |
| const Swapchain* swapchain = SwapchainFromHandle(info->swapchain); | |
| ALOG_ASSERT( | |
| info->imageIndex < swapchain->num_images, | |
| "imageIndex must be less than the number of images in swapchain"); | |
| ANativeWindowBuffer* buffer = | |
| swapchain->images[info->imageIndex].buffer.get(); | |
| VkNativeBufferANDROID native_buffer = { | |
| #pragma clang diagnostic push | |
| #pragma clang diagnostic ignored "-Wold-style-cast" | |
| .sType = VK_STRUCTURE_TYPE_NATIVE_BUFFER_ANDROID, | |
| #pragma clang diagnostic pop | |
| .pNext = bind_infos[idx].pNext, | |
| .handle = buffer->handle, | |
| .stride = buffer->stride, | |
| .format = buffer->format, | |
| .usage = int(buffer->usage), | |
| .usage3 = buffer->usage, | |
| .ahb = ANativeWindowBuffer_getHardwareBuffer(buffer), | |
| }; | |
| android_convertGralloc0To1Usage(int(buffer->usage), | |
| &native_buffer.usage2.producer, | |
| &native_buffer.usage2.consumer); | |
| // Reserve enough space to avoid letting re-allocation invalidate the | |
| // addresses of the elements inside. | |
| out_native_buffers->reserve(bind_info_count); | |
| out_native_buffers->emplace_back(native_buffer); | |
| // Reserve the space now since we know how much is needed now. | |
| out_bind_infos->reserve(bind_info_count); | |
| out_bind_infos->emplace_back(bind_infos[idx]); | |
| out_bind_infos->back().pNext = &out_native_buffers->back(); | |
| intercepted_indexes.insert(idx); | |
| } | |
| if (intercepted_indexes.empty()) | |
| return; | |
| for (uint32_t idx = 0; idx < bind_info_count; idx++) { | |
| if (intercepted_indexes.count(idx)) | |
| continue; | |
| out_bind_infos->emplace_back(bind_infos[idx]); | |
| } | |
| } | |
| VKAPI_ATTR | |
| VkResult BindImageMemory2(VkDevice device, | |
| uint32_t bindInfoCount, | |
| const VkBindImageMemoryInfo* pBindInfos) { | |
| ATRACE_CALL(); | |
| // out_native_buffers is for maintaining the lifecycle of the constructed | |
| // VkNativeBufferANDROID objects inside InterceptBindImageMemory2. | |
| std::vector<VkNativeBufferANDROID> out_native_buffers; | |
| std::vector<VkBindImageMemoryInfo> out_bind_infos; | |
| InterceptBindImageMemory2(bindInfoCount, pBindInfos, &out_native_buffers, | |
| &out_bind_infos); | |
| return GetData(device).driver.BindImageMemory2( | |
| device, bindInfoCount, | |
| out_bind_infos.empty() ? pBindInfos : out_bind_infos.data()); | |
| } | |
| VKAPI_ATTR | |
| VkResult BindImageMemory2KHR(VkDevice device, | |
| uint32_t bindInfoCount, | |
| const VkBindImageMemoryInfo* pBindInfos) { | |
| ATRACE_CALL(); | |
| std::vector<VkNativeBufferANDROID> out_native_buffers; | |
| std::vector<VkBindImageMemoryInfo> out_bind_infos; | |
| InterceptBindImageMemory2(bindInfoCount, pBindInfos, &out_native_buffers, | |
| &out_bind_infos); | |
| return GetData(device).driver.BindImageMemory2KHR( | |
| device, bindInfoCount, | |
| out_bind_infos.empty() ? pBindInfos : out_bind_infos.data()); | |
| } | |
| VKAPI_ATTR | |
| VkResult ReleaseSwapchainImagesEXT(VkDevice /*device*/, | |
| const VkReleaseSwapchainImagesInfoEXT* pReleaseInfo) { | |
| ATRACE_CALL(); | |
| Swapchain& swapchain = *SwapchainFromHandle(pReleaseInfo->swapchain); | |
| ANativeWindow* window = swapchain.surface.window.get(); | |
| // If in shared present mode, don't actually release the image back to the BQ. | |
| // Both sides share it forever. | |
| if (swapchain.shared) | |
| return VK_SUCCESS; | |
| for (uint32_t i = 0; i < pReleaseInfo->imageIndexCount; i++) { | |
| Swapchain::Image& img = swapchain.images[pReleaseInfo->pImageIndices[i]]; | |
| window->cancelBuffer(window, img.buffer.get(), img.dequeue_fence); | |
| // cancelBuffer has taken ownership of the dequeue fence | |
| img.dequeue_fence = -1; | |
| // if we're still holding a release fence, get rid of it now | |
| if (img.release_fence >= 0) { | |
| close(img.release_fence); | |
| img.release_fence = -1; | |
| } | |
| img.dequeued = false; | |
| } | |
| return VK_SUCCESS; | |
| } | |
| } // namespace driver | |
| } // namespace vulkan |