| /* |
| * Copyright 2018 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| // TODO(b/129481165): remove the #pragma below and fix conversion issues |
| #pragma clang diagnostic push |
| #pragma clang diagnostic ignored "-Wconversion" |
| #pragma clang diagnostic ignored "-Wextra" |
| |
| #undef LOG_TAG |
| #define LOG_TAG "LibSurfaceFlingerUnittests" |
| |
| #include <TimeStats/TimeStats.h> |
| #include <gmock/gmock.h> |
| #include <gtest/gtest.h> |
| #include <log/log.h> |
| #include <timestatsatomsproto/TimeStatsAtomsProtoHeader.h> |
| #include <utils/String16.h> |
| #include <utils/Vector.h> |
| |
| #include <chrono> |
| #include <random> |
| #include <unordered_set> |
| |
| #include "libsurfaceflinger_unittest_main.h" |
| |
| using namespace android::surfaceflinger; |
| using namespace google::protobuf; |
| using namespace std::chrono_literals; |
| |
| namespace android { |
| namespace { |
| |
| using testing::_; |
| using testing::AnyNumber; |
| using testing::Contains; |
| using testing::HasSubstr; |
| using testing::InSequence; |
| using testing::Not; |
| using testing::SizeIs; |
| using testing::StrEq; |
| using testing::UnorderedElementsAre; |
| |
| using PowerMode = hardware::graphics::composer::V2_4::IComposerClient::PowerMode; |
| |
| // clang-format off |
| #define FMT_PROTO true |
| #define FMT_STRING false |
| #define LAYER_ID_0 0 |
| #define LAYER_ID_1 1 |
| #define UID_0 123 |
| #define REFRESH_RATE_0 61 |
| #define RENDER_RATE_0 31 |
| #define REFRESH_RATE_BUCKET_0 60 |
| #define RENDER_RATE_BUCKET_0 30 |
| #define LAYER_ID_INVALID -1 |
| #define NUM_LAYERS 1 |
| #define NUM_LAYERS_INVALID "INVALID" |
| |
| const constexpr Fps kRefreshRate0 = Fps(static_cast<float>(REFRESH_RATE_0)); |
| const constexpr Fps kRenderRate0 = Fps(static_cast<float>(RENDER_RATE_0)); |
| |
| enum InputCommand : int32_t { |
| ENABLE = 0, |
| DISABLE = 1, |
| CLEAR = 2, |
| DUMP_ALL = 3, |
| DUMP_MAXLAYERS_1 = 4, |
| DUMP_MAXLAYERS_INVALID = 5, |
| INPUT_COMMAND_BEGIN = ENABLE, |
| INPUT_COMMAND_END = DUMP_MAXLAYERS_INVALID, |
| INPUT_COMMAND_RANGE = INPUT_COMMAND_END - INPUT_COMMAND_BEGIN + 1, |
| }; |
| |
| enum TimeStamp : int32_t { |
| POST = 0, |
| ACQUIRE = 1, |
| ACQUIRE_FENCE = 2, |
| LATCH = 3, |
| DESIRED = 4, |
| PRESENT = 5, |
| PRESENT_FENCE = 6, |
| TIME_STAMP_BEGIN = POST, |
| TIME_STAMP_END = PRESENT, |
| TIME_STAMP_RANGE = TIME_STAMP_END - TIME_STAMP_BEGIN + 1, |
| }; |
| |
| static const TimeStamp NORMAL_SEQUENCE[] = { |
| TimeStamp::POST, |
| TimeStamp::ACQUIRE, |
| TimeStamp::LATCH, |
| TimeStamp::DESIRED, |
| TimeStamp::PRESENT, |
| }; |
| |
| static const TimeStamp NORMAL_SEQUENCE_2[] = { |
| TimeStamp::POST, |
| TimeStamp::ACQUIRE_FENCE, |
| TimeStamp::LATCH, |
| TimeStamp::DESIRED, |
| TimeStamp::PRESENT_FENCE, |
| }; |
| |
| static const TimeStamp UNORDERED_SEQUENCE[] = { |
| TimeStamp::ACQUIRE, |
| TimeStamp::LATCH, |
| TimeStamp::POST, |
| TimeStamp::DESIRED, |
| TimeStamp::PRESENT, |
| }; |
| |
| static const TimeStamp INCOMPLETE_SEQUENCE[] = { |
| TimeStamp::POST, |
| }; |
| // clang-format on |
| |
| class TimeStatsTest : public testing::Test { |
| public: |
| TimeStatsTest() { |
| const ::testing::TestInfo* const test_info = |
| ::testing::UnitTest::GetInstance()->current_test_info(); |
| ALOGD("**** Setting up for %s.%s\n", test_info->test_case_name(), test_info->name()); |
| } |
| |
| ~TimeStatsTest() { |
| const ::testing::TestInfo* const test_info = |
| ::testing::UnitTest::GetInstance()->current_test_info(); |
| ALOGD("**** Tearing down after %s.%s\n", test_info->test_case_name(), test_info->name()); |
| } |
| |
| std::string inputCommand(InputCommand cmd, bool useProto); |
| |
| void setTimeStamp(TimeStamp type, int32_t id, uint64_t frameNumber, nsecs_t ts, |
| TimeStats::SetFrameRateVote frameRateVote); |
| |
| int32_t genRandomInt32(int32_t begin, int32_t end); |
| |
| template <size_t N> |
| void insertTimeRecord(const TimeStamp (&sequence)[N], int32_t id, uint64_t frameNumber, |
| nsecs_t ts, TimeStats::SetFrameRateVote frameRateVote = {}) { |
| for (size_t i = 0; i < N; i++, ts += 1000000) { |
| setTimeStamp(sequence[i], id, frameNumber, ts, frameRateVote); |
| } |
| } |
| |
| std::mt19937 mRandomEngine = std::mt19937(std::random_device()()); |
| std::unique_ptr<TimeStats> mTimeStats = |
| std::make_unique<impl::TimeStats>(std::nullopt, std::nullopt); |
| }; |
| |
| std::string TimeStatsTest::inputCommand(InputCommand cmd, bool useProto) { |
| std::string result; |
| Vector<String16> args; |
| |
| switch (cmd) { |
| case InputCommand::ENABLE: |
| args.push_back(String16("-enable")); |
| break; |
| case InputCommand::DISABLE: |
| args.push_back(String16("-disable")); |
| break; |
| case InputCommand::CLEAR: |
| args.push_back(String16("-clear")); |
| break; |
| case InputCommand::DUMP_ALL: |
| args.push_back(String16("-dump")); |
| break; |
| case InputCommand::DUMP_MAXLAYERS_1: |
| args.push_back(String16("-dump")); |
| args.push_back(String16("-maxlayers")); |
| args.push_back(String16(std::to_string(NUM_LAYERS).c_str())); |
| break; |
| case InputCommand::DUMP_MAXLAYERS_INVALID: |
| args.push_back(String16("-dump")); |
| args.push_back(String16("-maxlayers")); |
| args.push_back(String16(NUM_LAYERS_INVALID)); |
| break; |
| default: |
| ALOGD("Invalid control command"); |
| } |
| |
| EXPECT_NO_FATAL_FAILURE(mTimeStats->parseArgs(useProto, args, result)); |
| return result; |
| } |
| |
| static std::string genLayerName(int32_t layerId) { |
| return (layerId < 0 ? "PopupWindow:b54fcd1#0" : "com.example.fake#") + std::to_string(layerId); |
| } |
| |
| void TimeStatsTest::setTimeStamp(TimeStamp type, int32_t id, uint64_t frameNumber, nsecs_t ts, |
| TimeStats::SetFrameRateVote frameRateVote) { |
| switch (type) { |
| case TimeStamp::POST: |
| ASSERT_NO_FATAL_FAILURE( |
| mTimeStats->setPostTime(id, frameNumber, genLayerName(id), UID_0, ts)); |
| break; |
| case TimeStamp::ACQUIRE: |
| ASSERT_NO_FATAL_FAILURE(mTimeStats->setAcquireTime(id, frameNumber, ts)); |
| break; |
| case TimeStamp::ACQUIRE_FENCE: |
| ASSERT_NO_FATAL_FAILURE( |
| mTimeStats->setAcquireFence(id, frameNumber, std::make_shared<FenceTime>(ts))); |
| break; |
| case TimeStamp::LATCH: |
| ASSERT_NO_FATAL_FAILURE(mTimeStats->setLatchTime(id, frameNumber, ts)); |
| break; |
| case TimeStamp::DESIRED: |
| ASSERT_NO_FATAL_FAILURE(mTimeStats->setDesiredTime(id, frameNumber, ts)); |
| break; |
| case TimeStamp::PRESENT: |
| ASSERT_NO_FATAL_FAILURE(mTimeStats->setPresentTime(id, frameNumber, ts, kRefreshRate0, |
| kRenderRate0, frameRateVote)); |
| break; |
| case TimeStamp::PRESENT_FENCE: |
| ASSERT_NO_FATAL_FAILURE( |
| mTimeStats->setPresentFence(id, frameNumber, std::make_shared<FenceTime>(ts), |
| kRefreshRate0, kRenderRate0, frameRateVote)); |
| break; |
| default: |
| ALOGD("Invalid timestamp type"); |
| } |
| } |
| |
| int32_t TimeStatsTest::genRandomInt32(int32_t begin, int32_t end) { |
| std::uniform_int_distribution<int32_t> distr(begin, end); |
| return distr(mRandomEngine); |
| } |
| |
| TEST_F(TimeStatsTest, disabledByDefault) { |
| ASSERT_FALSE(mTimeStats->isEnabled()); |
| } |
| |
| TEST_F(TimeStatsTest, canEnableAndDisableTimeStats) { |
| EXPECT_TRUE(inputCommand(InputCommand::ENABLE, FMT_STRING).empty()); |
| ASSERT_TRUE(mTimeStats->isEnabled()); |
| |
| EXPECT_TRUE(inputCommand(InputCommand::DISABLE, FMT_STRING).empty()); |
| ASSERT_FALSE(mTimeStats->isEnabled()); |
| } |
| |
| TEST_F(TimeStatsTest, canIncreaseGlobalStats) { |
| constexpr size_t TOTAL_FRAMES = 5; |
| constexpr size_t MISSED_FRAMES = 4; |
| constexpr size_t CLIENT_COMPOSITION_FRAMES = 3; |
| |
| EXPECT_TRUE(inputCommand(InputCommand::ENABLE, FMT_STRING).empty()); |
| |
| for (size_t i = 0; i < TOTAL_FRAMES; i++) { |
| ASSERT_NO_FATAL_FAILURE(mTimeStats->incrementTotalFrames()); |
| } |
| for (size_t i = 0; i < MISSED_FRAMES; i++) { |
| ASSERT_NO_FATAL_FAILURE(mTimeStats->incrementMissedFrames()); |
| } |
| for (size_t i = 0; i < CLIENT_COMPOSITION_FRAMES; i++) { |
| ASSERT_NO_FATAL_FAILURE(mTimeStats->incrementClientCompositionFrames()); |
| } |
| |
| SFTimeStatsGlobalProto globalProto; |
| ASSERT_TRUE(globalProto.ParseFromString(inputCommand(InputCommand::DUMP_ALL, FMT_PROTO))); |
| |
| ASSERT_TRUE(globalProto.has_total_frames()); |
| EXPECT_EQ(TOTAL_FRAMES, globalProto.total_frames()); |
| ASSERT_TRUE(globalProto.has_missed_frames()); |
| EXPECT_EQ(MISSED_FRAMES, globalProto.missed_frames()); |
| ASSERT_TRUE(globalProto.has_client_composition_frames()); |
| EXPECT_EQ(CLIENT_COMPOSITION_FRAMES, globalProto.client_composition_frames()); |
| } |
| |
| TEST_F(TimeStatsTest, canIncreaseLateAcquireFrames) { |
| // this stat is not in the proto so verify by checking the string dump |
| constexpr size_t LATE_ACQUIRE_FRAMES = 2; |
| |
| EXPECT_TRUE(inputCommand(InputCommand::ENABLE, FMT_STRING).empty()); |
| |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_0, 1, 1000000); |
| for (size_t i = 0; i < LATE_ACQUIRE_FRAMES; i++) { |
| mTimeStats->incrementLatchSkipped(LAYER_ID_0, TimeStats::LatchSkipReason::LateAcquire); |
| } |
| insertTimeRecord(NORMAL_SEQUENCE_2, LAYER_ID_0, 2, 2000000); |
| |
| const std::string result(inputCommand(InputCommand::DUMP_ALL, FMT_STRING)); |
| const std::string expectedResult = "lateAcquireFrames = " + std::to_string(LATE_ACQUIRE_FRAMES); |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| } |
| |
| TEST_F(TimeStatsTest, canIncreaseBadDesiredPresent) { |
| // this stat is not in the proto so verify by checking the string dump |
| constexpr size_t BAD_DESIRED_PRESENT_FRAMES = 2; |
| |
| EXPECT_TRUE(inputCommand(InputCommand::ENABLE, FMT_STRING).empty()); |
| |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_0, 1, 1000000); |
| for (size_t i = 0; i < BAD_DESIRED_PRESENT_FRAMES; i++) { |
| mTimeStats->incrementBadDesiredPresent(LAYER_ID_0); |
| } |
| insertTimeRecord(NORMAL_SEQUENCE_2, LAYER_ID_0, 2, 2000000); |
| |
| const std::string result(inputCommand(InputCommand::DUMP_ALL, FMT_STRING)); |
| const std::string expectedResult = |
| "badDesiredPresentFrames = " + std::to_string(BAD_DESIRED_PRESENT_FRAMES); |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| } |
| |
| TEST_F(TimeStatsTest, canIncreaseJankyFramesForLayer) { |
| // this stat is not in the proto so verify by checking the string dump |
| EXPECT_TRUE(inputCommand(InputCommand::ENABLE, FMT_STRING).empty()); |
| |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_0, 1, 1000000); |
| mTimeStats->incrementJankyFrames({kRefreshRate0, kRenderRate0, UID_0, genLayerName(LAYER_ID_0), |
| JankType::SurfaceFlingerCpuDeadlineMissed, 1, 2, 3}); |
| mTimeStats->incrementJankyFrames({kRefreshRate0, kRenderRate0, UID_0, genLayerName(LAYER_ID_0), |
| JankType::SurfaceFlingerGpuDeadlineMissed, 1, 2, 3}); |
| mTimeStats->incrementJankyFrames({kRefreshRate0, kRenderRate0, UID_0, genLayerName(LAYER_ID_0), |
| JankType::DisplayHAL, 1, 2, 3}); |
| mTimeStats->incrementJankyFrames({kRefreshRate0, kRenderRate0, UID_0, genLayerName(LAYER_ID_0), |
| JankType::AppDeadlineMissed, 1, 2, 3}); |
| mTimeStats->incrementJankyFrames({kRefreshRate0, kRenderRate0, UID_0, genLayerName(LAYER_ID_0), |
| JankType::SurfaceFlingerScheduling, 1, 2, 3}); |
| mTimeStats->incrementJankyFrames({kRefreshRate0, kRenderRate0, UID_0, genLayerName(LAYER_ID_0), |
| JankType::PredictionError, 1, 2, 3}); |
| mTimeStats->incrementJankyFrames({kRefreshRate0, kRenderRate0, UID_0, genLayerName(LAYER_ID_0), |
| JankType::AppDeadlineMissed | JankType::BufferStuffing, 1, 2, |
| 3}); |
| mTimeStats->incrementJankyFrames({kRefreshRate0, kRenderRate0, UID_0, genLayerName(LAYER_ID_0), |
| JankType::None, 1, 2, 3}); |
| |
| const std::string result(inputCommand(InputCommand::DUMP_ALL, FMT_STRING)); |
| std::string expectedResult = |
| "displayRefreshRate = " + std::to_string(REFRESH_RATE_BUCKET_0) + " fps"; |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| expectedResult = "renderRate = " + std::to_string(RENDER_RATE_BUCKET_0) + " fps"; |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| expectedResult = "totalTimelineFrames = " + std::to_string(8); |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| expectedResult = "jankyFrames = " + std::to_string(7); |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| expectedResult = "sfLongCpuJankyFrames = " + std::to_string(1); |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| expectedResult = "sfLongGpuJankyFrames = " + std::to_string(1); |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| expectedResult = "sfUnattributedJankyFrames = " + std::to_string(1); |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| expectedResult = "appUnattributedJankyFrames = " + std::to_string(2); |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| expectedResult = "sfSchedulingJankyFrames = " + std::to_string(1); |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| expectedResult = "sfPredictionErrorJankyFrames = " + std::to_string(1); |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| expectedResult = "appBufferStuffingJankyFrames = " + std::to_string(1); |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| } |
| |
| TEST_F(TimeStatsTest, canCaptureSetFrameRateVote) { |
| // this stat is not in the proto so verify by checking the string dump |
| EXPECT_TRUE(inputCommand(InputCommand::ENABLE, FMT_STRING).empty()); |
| |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_0, 1, 1000000); |
| |
| const auto frameRate60 = TimeStats::SetFrameRateVote{ |
| .frameRate = 60.0f, |
| .frameRateCompatibility = TimeStats::SetFrameRateVote::FrameRateCompatibility::Default, |
| .seamlessness = TimeStats::SetFrameRateVote::Seamlessness::ShouldBeSeamless, |
| }; |
| const auto frameRate90 = TimeStats::SetFrameRateVote{ |
| .frameRate = 90.0f, |
| .frameRateCompatibility = |
| TimeStats::SetFrameRateVote::FrameRateCompatibility::ExactOrMultiple, |
| .seamlessness = TimeStats::SetFrameRateVote::Seamlessness::NotRequired, |
| }; |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_0, 2, 2000000, frameRate60); |
| std::string result(inputCommand(InputCommand::DUMP_ALL, FMT_STRING)); |
| std::string expectedResult = "frameRate = 60.00"; |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| expectedResult = "frameRateCompatibility = Default"; |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| expectedResult = "seamlessness = ShouldBeSeamless"; |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_0, 3, 3000000, frameRate90); |
| result = inputCommand(InputCommand::DUMP_ALL, FMT_STRING); |
| expectedResult = "frameRate = 90.00"; |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| expectedResult = "frameRateCompatibility = ExactOrMultiple"; |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| expectedResult = "seamlessness = NotRequired"; |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| |
| insertTimeRecord(NORMAL_SEQUENCE_2, LAYER_ID_0, 4, 4000000, frameRate60); |
| result = inputCommand(InputCommand::DUMP_ALL, FMT_STRING); |
| expectedResult = "frameRate = 60.00"; |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| expectedResult = "frameRateCompatibility = Default"; |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| expectedResult = "seamlessness = ShouldBeSeamless"; |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| } |
| |
| TEST_F(TimeStatsTest, canCaptureSetFrameRateVoteAfterZeroForLayer) { |
| // this stat is not in the proto so verify by checking the string dump |
| EXPECT_TRUE(inputCommand(InputCommand::ENABLE, FMT_STRING).empty()); |
| |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_0, 1, 1000000); |
| |
| const auto frameRate90 = TimeStats::SetFrameRateVote{ |
| .frameRate = 90.0f, |
| .frameRateCompatibility = |
| TimeStats::SetFrameRateVote::FrameRateCompatibility::ExactOrMultiple, |
| .seamlessness = TimeStats::SetFrameRateVote::Seamlessness::NotRequired, |
| }; |
| const auto frameRateDefault = TimeStats::SetFrameRateVote{ |
| .frameRate = 0.0f, |
| .frameRateCompatibility = TimeStats::SetFrameRateVote::FrameRateCompatibility::Default, |
| .seamlessness = TimeStats::SetFrameRateVote::Seamlessness::ShouldBeSeamless, |
| }; |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_0, 2, 2000000, frameRate90); |
| std::string result(inputCommand(InputCommand::DUMP_ALL, FMT_STRING)); |
| std::string expectedResult = "frameRate = 90.00"; |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| expectedResult = "frameRateCompatibility = ExactOrMultiple"; |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| expectedResult = "seamlessness = NotRequired"; |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_0, 3, 3000000, frameRateDefault); |
| result = inputCommand(InputCommand::DUMP_ALL, FMT_STRING); |
| expectedResult = "frameRate = 90.00"; |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| expectedResult = "frameRateCompatibility = ExactOrMultiple"; |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| expectedResult = "seamlessness = NotRequired"; |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| |
| insertTimeRecord(NORMAL_SEQUENCE_2, LAYER_ID_0, 4, 4000000, frameRateDefault); |
| result = inputCommand(InputCommand::DUMP_ALL, FMT_STRING); |
| expectedResult = "frameRate = 90.00"; |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| expectedResult = "frameRateCompatibility = ExactOrMultiple"; |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| expectedResult = "seamlessness = NotRequired"; |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| } |
| |
| TEST_F(TimeStatsTest, canIncreaseClientCompositionReusedFrames) { |
| // this stat is not in the proto so verify by checking the string dump |
| constexpr size_t CLIENT_COMPOSITION_REUSED_FRAMES = 2; |
| |
| EXPECT_TRUE(inputCommand(InputCommand::ENABLE, FMT_STRING).empty()); |
| for (size_t i = 0; i < CLIENT_COMPOSITION_REUSED_FRAMES; i++) { |
| ASSERT_NO_FATAL_FAILURE(mTimeStats->incrementClientCompositionReusedFrames()); |
| } |
| |
| const std::string result(inputCommand(InputCommand::DUMP_ALL, FMT_STRING)); |
| const std::string expectedResult = |
| "clientCompositionReusedFrames = " + std::to_string(CLIENT_COMPOSITION_REUSED_FRAMES); |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| } |
| |
| TEST_F(TimeStatsTest, canIncreaseRefreshRateSwitches) { |
| // this stat is not in the proto so verify by checking the string dump |
| constexpr size_t REFRESH_RATE_SWITCHES = 2; |
| |
| EXPECT_TRUE(inputCommand(InputCommand::ENABLE, FMT_STRING).empty()); |
| for (size_t i = 0; i < REFRESH_RATE_SWITCHES; i++) { |
| ASSERT_NO_FATAL_FAILURE(mTimeStats->incrementRefreshRateSwitches()); |
| } |
| |
| const std::string result(inputCommand(InputCommand::DUMP_ALL, FMT_STRING)); |
| const std::string expectedResult = |
| "refreshRateSwitches = " + std::to_string(REFRESH_RATE_SWITCHES); |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| } |
| |
| TEST_F(TimeStatsTest, canIncreaseCompositionStrategyChanges) { |
| // this stat is not in the proto so verify by checking the string dump |
| constexpr size_t COMPOSITION_STRATEGY_CHANGES = 2; |
| |
| EXPECT_TRUE(inputCommand(InputCommand::ENABLE, FMT_STRING).empty()); |
| for (size_t i = 0; i < COMPOSITION_STRATEGY_CHANGES; i++) { |
| ASSERT_NO_FATAL_FAILURE(mTimeStats->incrementCompositionStrategyChanges()); |
| } |
| |
| const std::string result(inputCommand(InputCommand::DUMP_ALL, FMT_STRING)); |
| const std::string expectedResult = |
| "compositionStrategyChanges = " + std::to_string(COMPOSITION_STRATEGY_CHANGES); |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| } |
| |
| TEST_F(TimeStatsTest, canAverageFrameDuration) { |
| EXPECT_TRUE(inputCommand(InputCommand::ENABLE, FMT_STRING).empty()); |
| mTimeStats->setPowerMode(PowerMode::ON); |
| mTimeStats->recordFrameDuration(std::chrono::nanoseconds(1ms).count(), |
| std::chrono::nanoseconds(6ms).count()); |
| mTimeStats->recordFrameDuration(std::chrono::nanoseconds(1ms).count(), |
| std::chrono::nanoseconds(16ms).count()); |
| |
| const std::string result(inputCommand(InputCommand::DUMP_ALL, FMT_STRING)); |
| EXPECT_THAT(result, HasSubstr("averageFrameDuration = 10.000 ms")); |
| } |
| |
| TEST_F(TimeStatsTest, canAverageRenderEngineTimings) { |
| EXPECT_TRUE(inputCommand(InputCommand::ENABLE, FMT_STRING).empty()); |
| mTimeStats->recordRenderEngineDuration(std::chrono::nanoseconds(1ms).count(), |
| std::make_shared<FenceTime>( |
| std::chrono::duration_cast< |
| std::chrono::nanoseconds>(3ms) |
| .count())); |
| |
| mTimeStats->recordRenderEngineDuration(std::chrono::nanoseconds(4ms).count(), |
| std::chrono::nanoseconds(8ms).count()); |
| |
| // Push a fake present fence to trigger flushing the RenderEngine timings. |
| mTimeStats->setPowerMode(PowerMode::ON); |
| mTimeStats->setPresentFenceGlobal( |
| std::make_shared<FenceTime>(std::chrono::nanoseconds(1ms).count())); |
| |
| const std::string result(inputCommand(InputCommand::DUMP_ALL, FMT_STRING)); |
| EXPECT_THAT(result, HasSubstr("averageRenderEngineTiming = 3.000 ms")); |
| } |
| |
| TEST_F(TimeStatsTest, canInsertGlobalPresentToPresent) { |
| EXPECT_TRUE(inputCommand(InputCommand::ENABLE, FMT_STRING).empty()); |
| |
| ASSERT_NO_FATAL_FAILURE( |
| mTimeStats->setPresentFenceGlobal(std::make_shared<FenceTime>(1000000))); |
| ASSERT_NO_FATAL_FAILURE( |
| mTimeStats->setPresentFenceGlobal(std::make_shared<FenceTime>(2000000))); |
| |
| ASSERT_NO_FATAL_FAILURE(mTimeStats->setPowerMode(PowerMode::ON)); |
| ASSERT_NO_FATAL_FAILURE( |
| mTimeStats->setPresentFenceGlobal(std::make_shared<FenceTime>(3000000))); |
| ASSERT_NO_FATAL_FAILURE( |
| mTimeStats->setPresentFenceGlobal(std::make_shared<FenceTime>(5000000))); |
| |
| ASSERT_NO_FATAL_FAILURE(mTimeStats->setPowerMode(PowerMode::OFF)); |
| ASSERT_NO_FATAL_FAILURE( |
| mTimeStats->setPresentFenceGlobal(std::make_shared<FenceTime>(6000000))); |
| ASSERT_NO_FATAL_FAILURE( |
| mTimeStats->setPresentFenceGlobal(std::make_shared<FenceTime>(8000000))); |
| |
| SFTimeStatsGlobalProto globalProto; |
| ASSERT_TRUE(globalProto.ParseFromString(inputCommand(InputCommand::DUMP_ALL, FMT_PROTO))); |
| |
| ASSERT_EQ(1, globalProto.present_to_present_size()); |
| const SFTimeStatsHistogramBucketProto& histogramProto = globalProto.present_to_present().Get(0); |
| EXPECT_EQ(1, histogramProto.frame_count()); |
| EXPECT_EQ(2, histogramProto.time_millis()); |
| } |
| |
| TEST_F(TimeStatsTest, canInsertGlobalFrameDuration) { |
| EXPECT_TRUE(inputCommand(InputCommand::ENABLE, FMT_STRING).empty()); |
| |
| mTimeStats->setPowerMode(PowerMode::OFF); |
| mTimeStats->recordFrameDuration(std::chrono::nanoseconds(1ms).count(), |
| std::chrono::nanoseconds(5ms).count()); |
| mTimeStats->setPowerMode(PowerMode::ON); |
| mTimeStats->recordFrameDuration(std::chrono::nanoseconds(3ms).count(), |
| std::chrono::nanoseconds(6ms).count()); |
| |
| SFTimeStatsGlobalProto globalProto; |
| ASSERT_TRUE(globalProto.ParseFromString(inputCommand(InputCommand::DUMP_ALL, FMT_PROTO))); |
| |
| ASSERT_EQ(1, globalProto.frame_duration_size()); |
| const SFTimeStatsHistogramBucketProto& histogramProto = globalProto.frame_duration().Get(0); |
| EXPECT_EQ(1, histogramProto.frame_count()); |
| EXPECT_EQ(3, histogramProto.time_millis()); |
| } |
| |
| TEST_F(TimeStatsTest, canInsertGlobalRenderEngineTiming) { |
| EXPECT_TRUE(inputCommand(InputCommand::ENABLE, FMT_STRING).empty()); |
| |
| mTimeStats->recordRenderEngineDuration(std::chrono::nanoseconds(1ms).count(), |
| std::make_shared<FenceTime>( |
| std::chrono::duration_cast< |
| std::chrono::nanoseconds>(3ms) |
| .count())); |
| |
| mTimeStats->recordRenderEngineDuration(std::chrono::nanoseconds(4ms).count(), |
| std::chrono::nanoseconds(6ms).count()); |
| |
| // First verify that flushing RenderEngine durations did not occur yet. |
| SFTimeStatsGlobalProto preFlushProto; |
| ASSERT_TRUE(preFlushProto.ParseFromString(inputCommand(InputCommand::DUMP_ALL, FMT_PROTO))); |
| ASSERT_EQ(0, preFlushProto.render_engine_timing_size()); |
| |
| // Push a fake present fence to trigger flushing the RenderEngine timings. |
| mTimeStats->setPowerMode(PowerMode::ON); |
| mTimeStats->setPresentFenceGlobal( |
| std::make_shared<FenceTime>(std::chrono::nanoseconds(1ms).count())); |
| |
| // Now we can verify that RenderEngine durations were flushed now. |
| SFTimeStatsGlobalProto postFlushProto; |
| ASSERT_TRUE(postFlushProto.ParseFromString(inputCommand(InputCommand::DUMP_ALL, FMT_PROTO))); |
| |
| ASSERT_EQ(1, postFlushProto.render_engine_timing_size()); |
| const SFTimeStatsHistogramBucketProto& histogramProto = |
| postFlushProto.render_engine_timing().Get(0); |
| EXPECT_EQ(2, histogramProto.frame_count()); |
| EXPECT_EQ(2, histogramProto.time_millis()); |
| } |
| |
| TEST_F(TimeStatsTest, canInsertOneLayerTimeStats) { |
| EXPECT_TRUE(inputCommand(InputCommand::ENABLE, FMT_STRING).empty()); |
| |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_0, 1, 1000000); |
| insertTimeRecord(NORMAL_SEQUENCE_2, LAYER_ID_0, 2, 2000000); |
| |
| SFTimeStatsGlobalProto globalProto; |
| ASSERT_TRUE(globalProto.ParseFromString(inputCommand(InputCommand::DUMP_ALL, FMT_PROTO))); |
| |
| ASSERT_EQ(1, globalProto.stats_size()); |
| const SFTimeStatsLayerProto& layerProto = globalProto.stats().Get(0); |
| ASSERT_TRUE(layerProto.has_layer_name()); |
| EXPECT_EQ(genLayerName(LAYER_ID_0), layerProto.layer_name()); |
| ASSERT_TRUE(layerProto.has_total_frames()); |
| EXPECT_EQ(1, layerProto.total_frames()); |
| ASSERT_EQ(6, layerProto.deltas_size()); |
| for (const SFTimeStatsDeltaProto& deltaProto : layerProto.deltas()) { |
| ASSERT_EQ(1, deltaProto.histograms_size()); |
| const SFTimeStatsHistogramBucketProto& histogramProto = deltaProto.histograms().Get(0); |
| EXPECT_EQ(1, histogramProto.frame_count()); |
| if ("post2acquire" == deltaProto.delta_name()) { |
| EXPECT_EQ(1, histogramProto.time_millis()); |
| } else if ("post2present" == deltaProto.delta_name()) { |
| EXPECT_EQ(4, histogramProto.time_millis()); |
| } else if ("acquire2present" == deltaProto.delta_name()) { |
| EXPECT_EQ(3, histogramProto.time_millis()); |
| } else if ("latch2present" == deltaProto.delta_name()) { |
| EXPECT_EQ(2, histogramProto.time_millis()); |
| } else if ("desired2present" == deltaProto.delta_name()) { |
| EXPECT_EQ(1, histogramProto.time_millis()); |
| } else if ("present2present" == deltaProto.delta_name()) { |
| EXPECT_EQ(1, histogramProto.time_millis()); |
| } else { |
| FAIL() << "Unknown delta_name: " << deltaProto.delta_name(); |
| } |
| } |
| } |
| |
| TEST_F(TimeStatsTest, canNotInsertInvalidLayerNameTimeStats) { |
| EXPECT_TRUE(inputCommand(InputCommand::ENABLE, FMT_STRING).empty()); |
| |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_INVALID, 1, 1000000); |
| insertTimeRecord(NORMAL_SEQUENCE_2, LAYER_ID_INVALID, 2, 2000000); |
| |
| SFTimeStatsGlobalProto globalProto; |
| ASSERT_TRUE(globalProto.ParseFromString(inputCommand(InputCommand::DUMP_ALL, FMT_PROTO))); |
| |
| ASSERT_EQ(0, globalProto.stats_size()); |
| } |
| |
| TEST_F(TimeStatsTest, canInsertMultipleLayersTimeStats) { |
| EXPECT_TRUE(inputCommand(InputCommand::ENABLE, FMT_STRING).empty()); |
| |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_0, 1, 1000000); |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_1, 1, 1000000); |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_0, 2, 2000000); |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_1, 2, 2000000); |
| |
| SFTimeStatsGlobalProto globalProto; |
| ASSERT_TRUE(globalProto.ParseFromString(inputCommand(InputCommand::DUMP_ALL, FMT_PROTO))); |
| |
| EXPECT_EQ(2, globalProto.stats_size()); |
| } |
| |
| TEST_F(TimeStatsTest, canInsertUnorderedLayerTimeStats) { |
| EXPECT_TRUE(inputCommand(InputCommand::ENABLE, FMT_STRING).empty()); |
| |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_0, 1, 1000000); |
| insertTimeRecord(UNORDERED_SEQUENCE, LAYER_ID_0, 2, 2000000); |
| |
| SFTimeStatsGlobalProto globalProto; |
| ASSERT_TRUE(globalProto.ParseFromString(inputCommand(InputCommand::DUMP_ALL, FMT_PROTO))); |
| |
| ASSERT_EQ(1, globalProto.stats_size()); |
| const SFTimeStatsLayerProto& layerProto = globalProto.stats().Get(0); |
| ASSERT_TRUE(layerProto.has_layer_name()); |
| EXPECT_EQ(genLayerName(LAYER_ID_0), layerProto.layer_name()); |
| ASSERT_TRUE(layerProto.has_total_frames()); |
| EXPECT_EQ(1, layerProto.total_frames()); |
| ASSERT_EQ(6, layerProto.deltas_size()); |
| for (const SFTimeStatsDeltaProto& deltaProto : layerProto.deltas()) { |
| ASSERT_EQ(1, deltaProto.histograms_size()); |
| const SFTimeStatsHistogramBucketProto& histogramProto = deltaProto.histograms().Get(0); |
| EXPECT_EQ(1, histogramProto.frame_count()); |
| if ("post2acquire" == deltaProto.delta_name()) { |
| EXPECT_EQ(0, histogramProto.time_millis()); |
| } else if ("post2present" == deltaProto.delta_name()) { |
| EXPECT_EQ(2, histogramProto.time_millis()); |
| } else if ("acquire2present" == deltaProto.delta_name()) { |
| EXPECT_EQ(2, histogramProto.time_millis()); |
| } else if ("latch2present" == deltaProto.delta_name()) { |
| EXPECT_EQ(2, histogramProto.time_millis()); |
| } else if ("desired2present" == deltaProto.delta_name()) { |
| EXPECT_EQ(1, histogramProto.time_millis()); |
| } else if ("present2present" == deltaProto.delta_name()) { |
| EXPECT_EQ(1, histogramProto.time_millis()); |
| } else { |
| FAIL() << "Unknown delta_name: " << deltaProto.delta_name(); |
| } |
| } |
| } |
| |
| TEST_F(TimeStatsTest, recordRefreshRateNewConfigs) { |
| EXPECT_TRUE(inputCommand(InputCommand::ENABLE, FMT_STRING).empty()); |
| |
| uint32_t fpsOne = 30; |
| uint32_t fpsTwo = 90; |
| uint64_t millisOne = 5000; |
| uint64_t millisTwo = 7000; |
| |
| mTimeStats->recordRefreshRate(fpsOne, ms2ns(millisOne)); |
| mTimeStats->recordRefreshRate(fpsTwo, ms2ns(millisTwo)); |
| |
| SFTimeStatsGlobalProto globalProto; |
| ASSERT_TRUE(globalProto.ParseFromString(inputCommand(InputCommand::DUMP_ALL, FMT_PROTO))); |
| |
| SFTimeStatsDisplayConfigBucketProto expectedBucketOne; |
| SFTimeStatsDisplayConfigProto* expectedConfigOne = expectedBucketOne.mutable_config(); |
| expectedConfigOne->set_fps(fpsOne); |
| expectedBucketOne.set_duration_millis(millisOne); |
| |
| SFTimeStatsDisplayConfigBucketProto expectedBucketTwo; |
| SFTimeStatsDisplayConfigProto* expectedConfigTwo = expectedBucketTwo.mutable_config(); |
| expectedConfigTwo->set_fps(fpsTwo); |
| expectedBucketTwo.set_duration_millis(millisTwo); |
| |
| EXPECT_THAT(globalProto.display_config_stats(), SizeIs(2)); |
| |
| std::unordered_set<uint32_t> seen_fps; |
| for (const auto& bucket : globalProto.display_config_stats()) { |
| seen_fps.emplace(bucket.config().fps()); |
| if (fpsOne == bucket.config().fps()) { |
| EXPECT_EQ(millisOne, bucket.duration_millis()); |
| } else if (fpsTwo == bucket.config().fps()) { |
| EXPECT_EQ(millisTwo, bucket.duration_millis()); |
| } else { |
| FAIL() << "Unknown fps: " << bucket.config().fps(); |
| } |
| } |
| EXPECT_THAT(seen_fps, UnorderedElementsAre(fpsOne, fpsTwo)); |
| } |
| |
| TEST_F(TimeStatsTest, recordRefreshRateUpdatesConfig) { |
| EXPECT_TRUE(inputCommand(InputCommand::ENABLE, FMT_STRING).empty()); |
| |
| uint32_t fps = 30; |
| uint64_t millisOne = 5000; |
| uint64_t millisTwo = 7000; |
| |
| mTimeStats->recordRefreshRate(fps, ms2ns(millisOne)); |
| mTimeStats->recordRefreshRate(fps, ms2ns(millisTwo)); |
| |
| SFTimeStatsGlobalProto globalProto; |
| ASSERT_TRUE(globalProto.ParseFromString(inputCommand(InputCommand::DUMP_ALL, FMT_PROTO))); |
| EXPECT_THAT(globalProto.display_config_stats(), SizeIs(1)); |
| EXPECT_EQ(fps, globalProto.display_config_stats().Get(0).config().fps()); |
| EXPECT_EQ(millisOne + millisTwo, globalProto.display_config_stats().Get(0).duration_millis()); |
| } |
| |
| TEST_F(TimeStatsTest, canRemoveTimeRecord) { |
| EXPECT_TRUE(inputCommand(InputCommand::ENABLE, FMT_STRING).empty()); |
| |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_0, 1, 1000000); |
| insertTimeRecord(INCOMPLETE_SEQUENCE, LAYER_ID_0, 2, 2000000); |
| ASSERT_NO_FATAL_FAILURE(mTimeStats->removeTimeRecord(0, 2)); |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_0, 3, 3000000); |
| |
| SFTimeStatsGlobalProto globalProto; |
| ASSERT_TRUE(globalProto.ParseFromString(inputCommand(InputCommand::DUMP_ALL, FMT_PROTO))); |
| |
| ASSERT_EQ(1, globalProto.stats_size()); |
| const SFTimeStatsLayerProto& layerProto = globalProto.stats().Get(0); |
| ASSERT_TRUE(layerProto.has_total_frames()); |
| EXPECT_EQ(1, layerProto.total_frames()); |
| } |
| |
| TEST_F(TimeStatsTest, canRecoverFromIncompleteTimeRecordError) { |
| EXPECT_TRUE(inputCommand(InputCommand::ENABLE, FMT_STRING).empty()); |
| |
| uint64_t frameNumber = 1; |
| nsecs_t ts = 1000000; |
| insertTimeRecord(INCOMPLETE_SEQUENCE, LAYER_ID_0, 1, 1000000); |
| for (size_t i = 0; i < impl::TimeStats::MAX_NUM_TIME_RECORDS + 2; i++) { |
| frameNumber++; |
| ts += 1000000; |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_0, frameNumber, ts); |
| } |
| |
| SFTimeStatsGlobalProto globalProto; |
| ASSERT_TRUE(globalProto.ParseFromString(inputCommand(InputCommand::DUMP_ALL, FMT_PROTO))); |
| |
| ASSERT_EQ(1, globalProto.stats_size()); |
| const SFTimeStatsLayerProto& layerProto = globalProto.stats().Get(0); |
| ASSERT_TRUE(layerProto.has_total_frames()); |
| EXPECT_EQ(1, layerProto.total_frames()); |
| } |
| |
| TEST_F(TimeStatsTest, layerTimeStatsOnDestroy) { |
| EXPECT_TRUE(inputCommand(InputCommand::ENABLE, FMT_STRING).empty()); |
| |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_0, 1, 1000000); |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_0, 2, 2000000); |
| ASSERT_NO_FATAL_FAILURE(mTimeStats->onDestroy(0)); |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_0, 3, 3000000); |
| |
| SFTimeStatsGlobalProto globalProto; |
| ASSERT_TRUE(globalProto.ParseFromString(inputCommand(InputCommand::DUMP_ALL, FMT_PROTO))); |
| |
| ASSERT_EQ(1, globalProto.stats_size()); |
| const SFTimeStatsLayerProto& layerProto = globalProto.stats().Get(0); |
| ASSERT_TRUE(layerProto.has_total_frames()); |
| EXPECT_EQ(1, layerProto.total_frames()); |
| } |
| |
| TEST_F(TimeStatsTest, canClearTimeStats) { |
| EXPECT_TRUE(inputCommand(InputCommand::ENABLE, FMT_STRING).empty()); |
| |
| ASSERT_NO_FATAL_FAILURE(mTimeStats->incrementTotalFrames()); |
| ASSERT_NO_FATAL_FAILURE(mTimeStats->incrementMissedFrames()); |
| ASSERT_NO_FATAL_FAILURE(mTimeStats->incrementClientCompositionFrames()); |
| ASSERT_NO_FATAL_FAILURE(mTimeStats->setPowerMode(PowerMode::ON)); |
| |
| mTimeStats->recordFrameDuration(std::chrono::nanoseconds(3ms).count(), |
| std::chrono::nanoseconds(6ms).count()); |
| mTimeStats->recordRenderEngineDuration(std::chrono::nanoseconds(4ms).count(), |
| std::chrono::nanoseconds(6ms).count()); |
| ASSERT_NO_FATAL_FAILURE( |
| mTimeStats->setPresentFenceGlobal(std::make_shared<FenceTime>(1000000))); |
| ASSERT_NO_FATAL_FAILURE( |
| mTimeStats->setPresentFenceGlobal(std::make_shared<FenceTime>(2000000))); |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_0, 1, 1000000); |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_0, 2, 2000000); |
| |
| EXPECT_TRUE(inputCommand(InputCommand::CLEAR, FMT_STRING).empty()); |
| |
| SFTimeStatsGlobalProto globalProto; |
| ASSERT_TRUE(globalProto.ParseFromString(inputCommand(InputCommand::DUMP_ALL, FMT_PROTO))); |
| |
| EXPECT_EQ(0, globalProto.total_frames()); |
| EXPECT_EQ(0, globalProto.missed_frames()); |
| EXPECT_EQ(0, globalProto.client_composition_frames()); |
| EXPECT_EQ(0, globalProto.present_to_present_size()); |
| EXPECT_EQ(0, globalProto.frame_duration_size()); |
| EXPECT_EQ(0, globalProto.render_engine_timing_size()); |
| EXPECT_EQ(0, globalProto.stats_size()); |
| } |
| |
| TEST_F(TimeStatsTest, canClearDumpOnlyTimeStats) { |
| // These stats are not in the proto so verify by checking the string dump. |
| EXPECT_TRUE(inputCommand(InputCommand::ENABLE, FMT_STRING).empty()); |
| ASSERT_NO_FATAL_FAILURE(mTimeStats->incrementClientCompositionReusedFrames()); |
| ASSERT_NO_FATAL_FAILURE(mTimeStats->incrementRefreshRateSwitches()); |
| ASSERT_NO_FATAL_FAILURE(mTimeStats->incrementCompositionStrategyChanges()); |
| mTimeStats->setPowerMode(PowerMode::ON); |
| mTimeStats->recordFrameDuration(std::chrono::nanoseconds(1ms).count(), |
| std::chrono::nanoseconds(5ms).count()); |
| mTimeStats->recordRenderEngineDuration(std::chrono::nanoseconds(4ms).count(), |
| std::chrono::nanoseconds(6ms).count()); |
| mTimeStats->setPresentFenceGlobal( |
| std::make_shared<FenceTime>(std::chrono::nanoseconds(1ms).count())); |
| |
| mTimeStats->incrementJankyFrames({kRefreshRate0, kRenderRate0, UID_0, genLayerName(LAYER_ID_0), |
| JankType::SurfaceFlingerCpuDeadlineMissed, 1, 2, 3}); |
| mTimeStats->incrementJankyFrames({kRefreshRate0, kRenderRate0, UID_0, genLayerName(LAYER_ID_0), |
| JankType::SurfaceFlingerGpuDeadlineMissed, 1, 2, 3}); |
| mTimeStats->incrementJankyFrames({kRefreshRate0, kRenderRate0, UID_0, genLayerName(LAYER_ID_0), |
| JankType::DisplayHAL, 1, 2, 3}); |
| mTimeStats->incrementJankyFrames({kRefreshRate0, kRenderRate0, UID_0, genLayerName(LAYER_ID_0), |
| JankType::AppDeadlineMissed, 1, 2, 3}); |
| mTimeStats->incrementJankyFrames({kRefreshRate0, kRenderRate0, UID_0, genLayerName(LAYER_ID_0), |
| JankType::SurfaceFlingerScheduling, 1, 2, 3}); |
| mTimeStats->incrementJankyFrames({kRefreshRate0, kRenderRate0, UID_0, genLayerName(LAYER_ID_0), |
| JankType::PredictionError, 1, 2, 3}); |
| mTimeStats->incrementJankyFrames({kRefreshRate0, kRenderRate0, UID_0, genLayerName(LAYER_ID_0), |
| JankType::AppDeadlineMissed | JankType::BufferStuffing, 1, 2, |
| 3}); |
| mTimeStats->incrementJankyFrames({kRefreshRate0, kRenderRate0, UID_0, genLayerName(LAYER_ID_0), |
| JankType::None, 1, 2, 3}); |
| |
| EXPECT_TRUE(inputCommand(InputCommand::CLEAR, FMT_STRING).empty()); |
| |
| const std::string result(inputCommand(InputCommand::DUMP_ALL, FMT_STRING)); |
| EXPECT_THAT(result, HasSubstr("clientCompositionReusedFrames = 0")); |
| EXPECT_THAT(result, HasSubstr("refreshRateSwitches = 0")); |
| EXPECT_THAT(result, HasSubstr("compositionStrategyChanges = 0")); |
| EXPECT_THAT(result, HasSubstr("averageFrameDuration = 0.000 ms")); |
| EXPECT_THAT(result, HasSubstr("averageRenderEngineTiming = 0.000 ms")); |
| std::string expectedResult = "totalTimelineFrames = "; |
| EXPECT_THAT(result, Not(HasSubstr(expectedResult))); |
| expectedResult = "jankyFrames = "; |
| EXPECT_THAT(result, Not(HasSubstr(expectedResult))); |
| expectedResult = "sfLongCpuJankyFrames = "; |
| EXPECT_THAT(result, Not(HasSubstr(expectedResult))); |
| expectedResult = "sfLongGpuJankyFrames = "; |
| EXPECT_THAT(result, Not(HasSubstr(expectedResult))); |
| expectedResult = "sfUnattributedJankyFrames = "; |
| EXPECT_THAT(result, Not(HasSubstr(expectedResult))); |
| expectedResult = "appUnattributedJankyFrames = "; |
| EXPECT_THAT(result, Not(HasSubstr(expectedResult))); |
| expectedResult = "sfSchedulingJankyFrames = "; |
| EXPECT_THAT(result, Not(HasSubstr(expectedResult))); |
| expectedResult = "sfPredictionErrorJankyFrames = "; |
| EXPECT_THAT(result, Not(HasSubstr(expectedResult))); |
| expectedResult = "appBufferStuffingJankyFrames = "; |
| EXPECT_THAT(result, Not(HasSubstr(expectedResult))); |
| } |
| |
| TEST_F(TimeStatsTest, canDumpWithMaxLayers) { |
| EXPECT_TRUE(inputCommand(InputCommand::ENABLE, FMT_STRING).empty()); |
| |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_0, 1, 1000000); |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_1, 1, 1000000); |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_0, 2, 2000000); |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_1, 2, 2000000); |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_1, 3, 2000000); |
| |
| SFTimeStatsGlobalProto globalProto; |
| ASSERT_TRUE( |
| globalProto.ParseFromString(inputCommand(InputCommand::DUMP_MAXLAYERS_1, FMT_PROTO))); |
| |
| ASSERT_EQ(1, globalProto.stats_size()); |
| const SFTimeStatsLayerProto& layerProto = globalProto.stats().Get(0); |
| ASSERT_TRUE(layerProto.has_layer_name()); |
| EXPECT_EQ(genLayerName(LAYER_ID_1), layerProto.layer_name()); |
| ASSERT_TRUE(layerProto.has_total_frames()); |
| EXPECT_EQ(2, layerProto.total_frames()); |
| } |
| |
| TEST_F(TimeStatsTest, canDumpWithInvalidMaxLayers) { |
| EXPECT_TRUE(inputCommand(InputCommand::ENABLE, FMT_STRING).empty()); |
| |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_0, 1, 1000000); |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_0, 2, 2000000); |
| |
| SFTimeStatsGlobalProto globalProto; |
| ASSERT_TRUE(globalProto.ParseFromString( |
| inputCommand(InputCommand::DUMP_MAXLAYERS_INVALID, FMT_PROTO))); |
| |
| ASSERT_EQ(0, globalProto.stats_size()); |
| } |
| |
| TEST_F(TimeStatsTest, noInfInAverageFPS) { |
| EXPECT_TRUE(inputCommand(InputCommand::ENABLE, FMT_STRING).empty()); |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_0, 1, 1000000); |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_0, 2, 1000000); |
| |
| const std::string result(inputCommand(InputCommand::DUMP_ALL, FMT_STRING)); |
| EXPECT_THAT(result, HasSubstr("averageFPS = 0.000")); |
| } |
| |
| namespace { |
| FrameTimingHistogram buildExpectedHistogram(const std::vector<int32_t>& times, |
| const std::vector<int32_t>& frameCounts) { |
| FrameTimingHistogram histogram; |
| for (int i = 0; i < times.size(); i++) { |
| ALOGE("Writing time: %d", times[i]); |
| histogram.add_time_millis_buckets(times[i]); |
| ALOGE("Writing count: %d", frameCounts[i]); |
| histogram.add_frame_counts((int64_t)frameCounts[i]); |
| } |
| return histogram; |
| } |
| } // namespace |
| |
| MATCHER_P(HistogramEq, expected, "") { |
| *result_listener << "Histograms are not equal! \n"; |
| |
| if (arg.time_millis_buckets_size() != expected.time_millis_buckets_size()) { |
| *result_listener << "Time millis bucket are different sizes. Expected: " |
| << expected.time_millis_buckets_size() << ". Actual " |
| << arg.time_millis_buckets_size(); |
| return false; |
| } |
| if (arg.frame_counts_size() != expected.frame_counts_size()) { |
| *result_listener << "Frame counts are different sizes. Expected: " |
| << expected.frame_counts_size() << ". Actual " << arg.frame_counts_size(); |
| return false; |
| } |
| |
| for (int i = 0; i < expected.time_millis_buckets_size(); i++) { |
| if (arg.time_millis_buckets(i) != expected.time_millis_buckets(i)) { |
| *result_listener << "time_millis_bucket[" << i |
| << "] is different. Expected: " << expected.time_millis_buckets(i) |
| << ". Actual: " << arg.time_millis_buckets(i); |
| return false; |
| } |
| if (arg.frame_counts(i) != expected.frame_counts(i)) { |
| *result_listener << "frame_counts[" << i |
| << "] is different. Expected: " << expected.frame_counts(i) |
| << ". Actual: " << arg.frame_counts(i); |
| return false; |
| } |
| } |
| return true; |
| } |
| |
| TEST_F(TimeStatsTest, globalStatsCallback) { |
| constexpr size_t TOTAL_FRAMES = 5; |
| constexpr size_t MISSED_FRAMES = 4; |
| constexpr size_t CLIENT_COMPOSITION_FRAMES = 3; |
| constexpr size_t DISPLAY_EVENT_CONNECTIONS = 14; |
| |
| EXPECT_TRUE(inputCommand(InputCommand::ENABLE, FMT_STRING).empty()); |
| |
| for (size_t i = 0; i < TOTAL_FRAMES; i++) { |
| mTimeStats->incrementTotalFrames(); |
| } |
| for (size_t i = 0; i < MISSED_FRAMES; i++) { |
| mTimeStats->incrementMissedFrames(); |
| } |
| for (size_t i = 0; i < CLIENT_COMPOSITION_FRAMES; i++) { |
| mTimeStats->incrementClientCompositionFrames(); |
| } |
| |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_0, 1, 1000000); |
| |
| mTimeStats->recordDisplayEventConnectionCount(DISPLAY_EVENT_CONNECTIONS); |
| mTimeStats->setPowerMode(PowerMode::ON); |
| mTimeStats->recordFrameDuration(1000000, 3000000); |
| mTimeStats->recordRenderEngineDuration(2000000, 4000000); |
| mTimeStats->recordRenderEngineDuration(2000000, std::make_shared<FenceTime>(3000000)); |
| |
| mTimeStats->setPresentFenceGlobal(std::make_shared<FenceTime>(3000000)); |
| mTimeStats->setPresentFenceGlobal(std::make_shared<FenceTime>(5000000)); |
| |
| mTimeStats->incrementJankyFrames({kRefreshRate0, kRenderRate0, UID_0, genLayerName(LAYER_ID_0), |
| JankType::SurfaceFlingerCpuDeadlineMissed, 1, 2, 3}); |
| mTimeStats->incrementJankyFrames({kRefreshRate0, kRenderRate0, UID_0, genLayerName(LAYER_ID_0), |
| JankType::SurfaceFlingerGpuDeadlineMissed, 1, 2, 3}); |
| mTimeStats->incrementJankyFrames({kRefreshRate0, kRenderRate0, UID_0, genLayerName(LAYER_ID_0), |
| JankType::DisplayHAL, 1, 2, 3}); |
| mTimeStats->incrementJankyFrames({kRefreshRate0, kRenderRate0, UID_0, genLayerName(LAYER_ID_0), |
| JankType::AppDeadlineMissed, 1, 2, 3}); |
| mTimeStats->incrementJankyFrames({kRefreshRate0, kRenderRate0, UID_0, genLayerName(LAYER_ID_0), |
| JankType::SurfaceFlingerScheduling, 1, 2, 3}); |
| mTimeStats->incrementJankyFrames({kRefreshRate0, kRenderRate0, UID_0, genLayerName(LAYER_ID_0), |
| JankType::PredictionError, 1, 2, 3}); |
| mTimeStats->incrementJankyFrames({kRefreshRate0, kRenderRate0, UID_0, genLayerName(LAYER_ID_0), |
| JankType::AppDeadlineMissed | JankType::BufferStuffing, 1, 2, |
| 3}); |
| mTimeStats->incrementJankyFrames({kRefreshRate0, kRenderRate0, UID_0, genLayerName(LAYER_ID_0), |
| JankType::BufferStuffing, 1, 2, 3}); |
| mTimeStats->incrementJankyFrames({kRefreshRate0, kRenderRate0, UID_0, genLayerName(LAYER_ID_0), |
| JankType::None, 1, 2, 3}); |
| |
| std::string pulledData; |
| EXPECT_TRUE(mTimeStats->onPullAtom(10062 /*SURFACEFLINGER_STATS_GLOBAL_INFO*/, &pulledData)); |
| |
| android::surfaceflinger::SurfaceflingerStatsGlobalInfoWrapper atomList; |
| ASSERT_TRUE(atomList.ParseFromString(pulledData)); |
| ASSERT_EQ(atomList.atom_size(), 1); |
| const android::surfaceflinger::SurfaceflingerStatsGlobalInfo& atom = atomList.atom(0); |
| |
| EXPECT_EQ(atom.total_frames(), TOTAL_FRAMES); |
| EXPECT_EQ(atom.missed_frames(), MISSED_FRAMES); |
| EXPECT_EQ(atom.client_composition_frames(), CLIENT_COMPOSITION_FRAMES); |
| // Display on millis is not checked. |
| EXPECT_EQ(atom.animation_millis(), 2); |
| EXPECT_EQ(atom.event_connection_count(), DISPLAY_EVENT_CONNECTIONS); |
| EXPECT_THAT(atom.frame_duration(), HistogramEq(buildExpectedHistogram({2}, {1}))); |
| EXPECT_THAT(atom.render_engine_timing(), HistogramEq(buildExpectedHistogram({1, 2}, {1, 1}))); |
| EXPECT_EQ(atom.total_timeline_frames(), 9); |
| EXPECT_EQ(atom.total_janky_frames(), 7); |
| EXPECT_EQ(atom.total_janky_frames_with_long_cpu(), 1); |
| EXPECT_EQ(atom.total_janky_frames_with_long_gpu(), 1); |
| EXPECT_EQ(atom.total_janky_frames_sf_unattributed(), 1); |
| EXPECT_EQ(atom.total_janky_frames_app_unattributed(), 2); |
| EXPECT_EQ(atom.total_janky_frames_sf_scheduling(), 1); |
| EXPECT_EQ(atom.total_jank_frames_sf_prediction_error(), 1); |
| EXPECT_EQ(atom.total_jank_frames_app_buffer_stuffing(), 2); |
| EXPECT_EQ(atom.display_refresh_rate_bucket(), REFRESH_RATE_BUCKET_0); |
| EXPECT_THAT(atom.sf_deadline_misses(), HistogramEq(buildExpectedHistogram({1}, {7}))); |
| EXPECT_THAT(atom.sf_prediction_errors(), HistogramEq(buildExpectedHistogram({2}, {7}))); |
| EXPECT_EQ(atom.render_rate_bucket(), RENDER_RATE_BUCKET_0); |
| |
| SFTimeStatsGlobalProto globalProto; |
| ASSERT_TRUE(globalProto.ParseFromString(inputCommand(InputCommand::DUMP_ALL, FMT_PROTO))); |
| |
| EXPECT_EQ(0, globalProto.total_frames()); |
| EXPECT_EQ(0, globalProto.missed_frames()); |
| EXPECT_EQ(0, globalProto.client_composition_frames()); |
| EXPECT_EQ(0, globalProto.present_to_present_size()); |
| |
| // also check dump-only stats: expect that global stats are indeed dropped but there should |
| // still be stats for the layer |
| const std::string result(inputCommand(InputCommand::DUMP_ALL, FMT_STRING)); |
| std::string expectedResult = "totalTimelineFrames = " + std::to_string(0); |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| expectedResult = "totalTimelineFrames = " + std::to_string(9); |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| expectedResult = "jankyFrames = " + std::to_string(0); |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| expectedResult = "jankyFrames = " + std::to_string(7); |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| expectedResult = "sfLongCpuJankyFrames = " + std::to_string(0); |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| expectedResult = "sfLongCpuJankyFrames = " + std::to_string(1); |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| expectedResult = "sfLongGpuJankyFrames = " + std::to_string(0); |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| expectedResult = "sfLongGpuJankyFrames = " + std::to_string(1); |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| expectedResult = "sfUnattributedJankyFrames = " + std::to_string(0); |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| expectedResult = "sfUnattributedJankyFrames = " + std::to_string(1); |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| expectedResult = "appUnattributedJankyFrames = " + std::to_string(0); |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| expectedResult = "appUnattributedJankyFrames = " + std::to_string(2); |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| expectedResult = "sfSchedulingJankyFrames = " + std::to_string(0); |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| expectedResult = "sfSchedulingJankyFrames = " + std::to_string(1); |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| expectedResult = "sfPredictionErrorJankyFrames = " + std::to_string(0); |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| expectedResult = "sfPredictionErrorJankyFrames = " + std::to_string(1); |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| expectedResult = "appBufferStuffingJankyFrames = " + std::to_string(0); |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| expectedResult = "appBufferStuffingJankyFrames = " + std::to_string(2); |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| } |
| |
| TEST_F(TimeStatsTest, layerStatsCallback_pullsAllAndClears) { |
| constexpr size_t LATE_ACQUIRE_FRAMES = 2; |
| constexpr size_t BAD_DESIRED_PRESENT_FRAMES = 3; |
| EXPECT_TRUE(inputCommand(InputCommand::ENABLE, FMT_STRING).empty()); |
| |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_0, 1, 1000000); |
| for (size_t i = 0; i < LATE_ACQUIRE_FRAMES; i++) { |
| mTimeStats->incrementLatchSkipped(LAYER_ID_0, TimeStats::LatchSkipReason::LateAcquire); |
| } |
| for (size_t i = 0; i < BAD_DESIRED_PRESENT_FRAMES; i++) { |
| mTimeStats->incrementBadDesiredPresent(LAYER_ID_0); |
| } |
| const auto frameRate60 = TimeStats::SetFrameRateVote{ |
| .frameRate = 60.0f, |
| .frameRateCompatibility = |
| TimeStats::SetFrameRateVote::FrameRateCompatibility::ExactOrMultiple, |
| .seamlessness = TimeStats::SetFrameRateVote::Seamlessness::NotRequired, |
| }; |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_0, 2, 2000000, frameRate60); |
| |
| mTimeStats->incrementJankyFrames({kRefreshRate0, kRenderRate0, UID_0, genLayerName(LAYER_ID_0), |
| JankType::SurfaceFlingerCpuDeadlineMissed, 1, 2, 3}); |
| mTimeStats->incrementJankyFrames({kRefreshRate0, kRenderRate0, UID_0, genLayerName(LAYER_ID_0), |
| JankType::SurfaceFlingerGpuDeadlineMissed, 1, 2, 3}); |
| mTimeStats->incrementJankyFrames({kRefreshRate0, kRenderRate0, UID_0, genLayerName(LAYER_ID_0), |
| JankType::DisplayHAL, 1, 2, 3}); |
| mTimeStats->incrementJankyFrames({kRefreshRate0, kRenderRate0, UID_0, genLayerName(LAYER_ID_0), |
| JankType::AppDeadlineMissed, 1, 2, 3}); |
| mTimeStats->incrementJankyFrames({kRefreshRate0, kRenderRate0, UID_0, genLayerName(LAYER_ID_0), |
| JankType::SurfaceFlingerScheduling, 1, 2, 2}); |
| mTimeStats->incrementJankyFrames({kRefreshRate0, kRenderRate0, UID_0, genLayerName(LAYER_ID_0), |
| JankType::PredictionError, 1, 2, 2}); |
| mTimeStats->incrementJankyFrames({kRefreshRate0, kRenderRate0, UID_0, genLayerName(LAYER_ID_0), |
| JankType::AppDeadlineMissed | JankType::BufferStuffing, 1, 2, |
| 2}); |
| mTimeStats->incrementJankyFrames({kRefreshRate0, kRenderRate0, UID_0, genLayerName(LAYER_ID_0), |
| JankType::None, 1, 2, 3}); |
| |
| std::string pulledData; |
| EXPECT_TRUE(mTimeStats->onPullAtom(10063 /*SURFACEFLINGER_STATS_LAYER_INFO*/, &pulledData)); |
| |
| android::surfaceflinger::SurfaceflingerStatsLayerInfoWrapper atomList; |
| ASSERT_TRUE(atomList.ParseFromString(pulledData)); |
| ASSERT_EQ(atomList.atom_size(), 1); |
| const android::surfaceflinger::SurfaceflingerStatsLayerInfo& atom = atomList.atom(0); |
| |
| EXPECT_EQ(atom.layer_name(), genLayerName(LAYER_ID_0)); |
| EXPECT_EQ(atom.total_frames(), 1); |
| EXPECT_EQ(atom.dropped_frames(), 0); |
| EXPECT_THAT(atom.present_to_present(), HistogramEq(buildExpectedHistogram({1}, {1}))); |
| EXPECT_THAT(atom.post_to_present(), HistogramEq(buildExpectedHistogram({4}, {1}))); |
| EXPECT_THAT(atom.acquire_to_present(), HistogramEq(buildExpectedHistogram({3}, {1}))); |
| EXPECT_THAT(atom.latch_to_present(), HistogramEq(buildExpectedHistogram({2}, {1}))); |
| EXPECT_THAT(atom.desired_to_present(), HistogramEq(buildExpectedHistogram({1}, {1}))); |
| EXPECT_THAT(atom.post_to_acquire(), HistogramEq(buildExpectedHistogram({1}, {1}))); |
| EXPECT_EQ(atom.late_acquire_frames(), LATE_ACQUIRE_FRAMES); |
| EXPECT_EQ(atom.bad_desired_present_frames(), BAD_DESIRED_PRESENT_FRAMES); |
| EXPECT_EQ(atom.uid(), UID_0); |
| EXPECT_EQ(atom.total_timeline_frames(), 8); |
| EXPECT_EQ(atom.total_janky_frames(), 7); |
| EXPECT_EQ(atom.total_janky_frames_with_long_cpu(), 1); |
| EXPECT_EQ(atom.total_janky_frames_with_long_gpu(), 1); |
| EXPECT_EQ(atom.total_janky_frames_sf_unattributed(), 1); |
| EXPECT_EQ(atom.total_janky_frames_app_unattributed(), 2); |
| EXPECT_EQ(atom.total_janky_frames_sf_scheduling(), 1); |
| EXPECT_EQ(atom.total_jank_frames_sf_prediction_error(), 1); |
| EXPECT_EQ(atom.total_jank_frames_app_buffer_stuffing(), 1); |
| EXPECT_EQ(atom.display_refresh_rate_bucket(), REFRESH_RATE_BUCKET_0); |
| EXPECT_EQ(atom.render_rate_bucket(), RENDER_RATE_BUCKET_0); |
| EXPECT_THAT(atom.set_frame_rate_vote().frame_rate(), testing::FloatEq(frameRate60.frameRate)); |
| EXPECT_EQ((int)atom.set_frame_rate_vote().frame_rate_compatibility(), |
| (int)frameRate60.frameRateCompatibility); |
| EXPECT_EQ((int)atom.set_frame_rate_vote().seamlessness(), (int)frameRate60.seamlessness); |
| EXPECT_THAT(atom.app_deadline_misses(), HistogramEq(buildExpectedHistogram({3, 2}, {4, 3}))); |
| |
| SFTimeStatsGlobalProto globalProto; |
| ASSERT_TRUE(globalProto.ParseFromString(inputCommand(InputCommand::DUMP_ALL, FMT_PROTO))); |
| |
| EXPECT_EQ(0, globalProto.stats_size()); |
| |
| // also check dump-only stats: expect that layer stats are indeed dropped but there should still |
| // be global stats |
| const std::string result(inputCommand(InputCommand::DUMP_ALL, FMT_STRING)); |
| std::string expectedResult = "totalTimelineFrames = " + std::to_string(8); |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| expectedResult = "jankyFrames = " + std::to_string(7); |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| expectedResult = "sfLongCpuJankyFrames = " + std::to_string(1); |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| expectedResult = "sfLongGpuJankyFrames = " + std::to_string(1); |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| expectedResult = "sfUnattributedJankyFrames = " + std::to_string(1); |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| expectedResult = "appUnattributedJankyFrames = " + std::to_string(2); |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| expectedResult = "sfSchedulingJankyFrames = " + std::to_string(1); |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| expectedResult = "sfPredictionErrorJankyFrames = " + std::to_string(1); |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| expectedResult = "appBufferStuffingJankyFrames = " + std::to_string(1); |
| EXPECT_THAT(result, HasSubstr(expectedResult)); |
| |
| std::string expectedMissing = "uid = " + std::to_string(UID_0); |
| EXPECT_THAT(result, Not(HasSubstr(expectedMissing))); |
| } |
| |
| TEST_F(TimeStatsTest, layerStatsCallback_pullsMultipleLayers) { |
| EXPECT_TRUE(inputCommand(InputCommand::ENABLE, FMT_STRING).empty()); |
| |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_0, 1, 1000000); |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_0, 2, 2000000); |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_1, 1, 2000000); |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_1, 2, 3000000); |
| |
| std::string pulledData; |
| EXPECT_TRUE(mTimeStats->onPullAtom(10063 /*SURFACEFLINGER_STATS_LAYER_INFO*/, &pulledData)); |
| |
| android::surfaceflinger::SurfaceflingerStatsLayerInfoWrapper atomList; |
| ASSERT_TRUE(atomList.ParseFromString(pulledData)); |
| ASSERT_EQ(atomList.atom_size(), 2); |
| std::vector<std::string> actualLayerNames = {atomList.atom(0).layer_name(), |
| atomList.atom(1).layer_name()}; |
| EXPECT_THAT(actualLayerNames, |
| UnorderedElementsAre(genLayerName(LAYER_ID_0), genLayerName(LAYER_ID_1))); |
| } |
| |
| TEST_F(TimeStatsTest, layerStatsCallback_pullsMultipleBuckets) { |
| EXPECT_TRUE(inputCommand(InputCommand::ENABLE, FMT_STRING).empty()); |
| |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_0, 1, 1000000); |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_0, 2, 2000000); |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_0, 3, 4000000); |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_0, 4, 5000000); |
| |
| // Now make sure that TimeStats flushes global stats to set the callback. |
| mTimeStats->setPowerMode(PowerMode::ON); |
| mTimeStats->setPresentFenceGlobal(std::make_shared<FenceTime>(3000000)); |
| mTimeStats->setPresentFenceGlobal(std::make_shared<FenceTime>(5000000)); |
| |
| std::string pulledData; |
| EXPECT_TRUE(mTimeStats->onPullAtom(10063 /*SURFACEFLINGER_STATS_LAYER_INFO*/, &pulledData)); |
| |
| android::surfaceflinger::SurfaceflingerStatsLayerInfoWrapper atomList; |
| ASSERT_TRUE(atomList.ParseFromString(pulledData)); |
| ASSERT_EQ(atomList.atom_size(), 1); |
| const android::surfaceflinger::SurfaceflingerStatsLayerInfo& atom = atomList.atom(0); |
| EXPECT_THAT(atom.present_to_present(), HistogramEq(buildExpectedHistogram({1, 2}, {2, 1}))); |
| } |
| |
| TEST_F(TimeStatsTest, layerStatsCallback_limitsHistogramBuckets) { |
| mTimeStats = std::make_unique<impl::TimeStats>(std::nullopt, 1); |
| EXPECT_TRUE(inputCommand(InputCommand::ENABLE, FMT_STRING).empty()); |
| |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_0, 1, 1000000); |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_0, 2, 2000000); |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_0, 3, 4000000); |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_0, 4, 5000000); |
| |
| std::string pulledData; |
| EXPECT_TRUE(mTimeStats->onPullAtom(10063 /*SURFACEFLINGER_STATS_LAYER_INFO*/, &pulledData)); |
| |
| android::surfaceflinger::SurfaceflingerStatsLayerInfoWrapper atomList; |
| ASSERT_TRUE(atomList.ParseFromString(pulledData)); |
| ASSERT_EQ(atomList.atom_size(), 1); |
| const android::surfaceflinger::SurfaceflingerStatsLayerInfo& atom = atomList.atom(0); |
| EXPECT_THAT(atom.present_to_present(), HistogramEq(buildExpectedHistogram({1}, {2}))); |
| } |
| |
| TEST_F(TimeStatsTest, layerStatsCallback_limitsLayers) { |
| mTimeStats = std::make_unique<impl::TimeStats>(1, std::nullopt); |
| EXPECT_TRUE(inputCommand(InputCommand::ENABLE, FMT_STRING).empty()); |
| |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_0, 1, 1000000); |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_0, 2, 2000000); |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_1, 1, 2000000); |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_1, 2, 3000000); |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_1, 4, 5000000); |
| |
| std::string pulledData; |
| EXPECT_TRUE(mTimeStats->onPullAtom(10063 /*SURFACEFLINGER_STATS_LAYER_INFO*/, &pulledData)); |
| |
| android::surfaceflinger::SurfaceflingerStatsLayerInfoWrapper atomList; |
| ASSERT_TRUE(atomList.ParseFromString(pulledData)); |
| ASSERT_EQ(atomList.atom_size(), 1); |
| EXPECT_EQ(atomList.atom(0).layer_name(), genLayerName(LAYER_ID_1)); |
| } |
| |
| TEST_F(TimeStatsTest, canSurviveMonkey) { |
| if (g_noSlowTests) { |
| GTEST_SKIP(); |
| } |
| |
| EXPECT_TRUE(inputCommand(InputCommand::ENABLE, FMT_STRING).empty()); |
| |
| for (size_t i = 0; i < 10000000; ++i) { |
| const int32_t layerId = genRandomInt32(-1, 10); |
| const int32_t frameNumber = genRandomInt32(1, 10); |
| switch (genRandomInt32(0, 100)) { |
| case 0: |
| ALOGV("removeTimeRecord"); |
| ASSERT_NO_FATAL_FAILURE(mTimeStats->removeTimeRecord(layerId, frameNumber)); |
| continue; |
| case 1: |
| ALOGV("onDestroy"); |
| ASSERT_NO_FATAL_FAILURE(mTimeStats->onDestroy(layerId)); |
| continue; |
| } |
| TimeStamp type = static_cast<TimeStamp>(genRandomInt32(TIME_STAMP_BEGIN, TIME_STAMP_END)); |
| const int32_t ts = genRandomInt32(1, 1000000000); |
| ALOGV("type[%d], layerId[%d], frameNumber[%d], ts[%d]", type, layerId, frameNumber, ts); |
| setTimeStamp(type, layerId, frameNumber, ts, {}); |
| } |
| } |
| |
| TEST_F(TimeStatsTest, refreshRateIsClampedToNearestBucket) { |
| // this stat is not in the proto so verify by checking the string dump |
| const auto verifyRefreshRateBucket = [&](Fps fps, int32_t bucket) { |
| EXPECT_TRUE(inputCommand(InputCommand::CLEAR, FMT_STRING).empty()); |
| EXPECT_TRUE(inputCommand(InputCommand::ENABLE, FMT_STRING).empty()); |
| |
| insertTimeRecord(NORMAL_SEQUENCE, LAYER_ID_0, 1, 1000000); |
| mTimeStats->incrementJankyFrames( |
| {fps, std::nullopt, UID_0, genLayerName(LAYER_ID_0), JankType::None, 0, 0, 0}); |
| const std::string result(inputCommand(InputCommand::DUMP_ALL, FMT_STRING)); |
| std::string expectedResult = "displayRefreshRate = " + std::to_string(bucket) + " fps"; |
| EXPECT_THAT(result, HasSubstr(expectedResult)) << "failed for " << fps; |
| }; |
| |
| verifyRefreshRateBucket(Fps(91.f), 90); |
| verifyRefreshRateBucket(Fps(89.f), 90); |
| |
| verifyRefreshRateBucket(Fps(61.f), 60); |
| verifyRefreshRateBucket(Fps(59.f), 60); |
| |
| verifyRefreshRateBucket(Fps(31.f), 30); |
| verifyRefreshRateBucket(Fps(29.f), 30); |
| } |
| |
| } // namespace |
| } // namespace android |
| |
| // TODO(b/129481165): remove the #pragma below and fix conversion issues |
| #pragma clang diagnostic pop // ignored "-Wconversion -Wextra" |
