| /* |
| * Copyright 2012, The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "bcc/Assert.h" |
| #include "bcc/Renderscript/RSTransforms.h" |
| |
| #include <cstdlib> |
| |
| #include <llvm/IR/DerivedTypes.h> |
| #include <llvm/IR/Function.h> |
| #include <llvm/IR/Instructions.h> |
| #include <llvm/IR/IRBuilder.h> |
| #include <llvm/IR/MDBuilder.h> |
| #include <llvm/IR/Module.h> |
| #include <llvm/Pass.h> |
| #include <llvm/Support/raw_ostream.h> |
| #include <llvm/IR/DataLayout.h> |
| #include <llvm/IR/Function.h> |
| #include <llvm/IR/Type.h> |
| #include <llvm/Transforms/Utils/BasicBlockUtils.h> |
| |
| #include "bcc/Config/Config.h" |
| #include "bcc/Renderscript/RSInfo.h" |
| #include "bcc/Support/Log.h" |
| |
| #include "bcinfo/MetadataExtractor.h" |
| |
| using namespace bcc; |
| |
| namespace { |
| |
| /* RSForEachExpandPass - This pass operates on functions that are able to be |
| * called via rsForEach() or "foreach_<NAME>". We create an inner loop for the |
| * ForEach-able function to be invoked over the appropriate data cells of the |
| * input/output allocations (adjusting other relevant parameters as we go). We |
| * support doing this for any ForEach-able compute kernels. The new function |
| * name is the original function name followed by ".expand". Note that we |
| * still generate code for the original function. |
| */ |
| class RSForEachExpandPass : public llvm::ModulePass { |
| private: |
| static char ID; |
| |
| llvm::Module *M; |
| llvm::LLVMContext *C; |
| |
| const RSInfo::ExportForeachFuncListTy &mFuncs; |
| |
| // Turns on optimization of allocation stride values. |
| bool mEnableStepOpt; |
| |
| uint32_t getRootSignature(llvm::Function *F) { |
| const llvm::NamedMDNode *ExportForEachMetadata = |
| M->getNamedMetadata("#rs_export_foreach"); |
| |
| if (!ExportForEachMetadata) { |
| llvm::SmallVector<llvm::Type*, 8> RootArgTys; |
| for (llvm::Function::arg_iterator B = F->arg_begin(), |
| E = F->arg_end(); |
| B != E; |
| ++B) { |
| RootArgTys.push_back(B->getType()); |
| } |
| |
| // For pre-ICS bitcode, we may not have signature information. In that |
| // case, we use the size of the RootArgTys to select the number of |
| // arguments. |
| return (1 << RootArgTys.size()) - 1; |
| } |
| |
| if (ExportForEachMetadata->getNumOperands() == 0) { |
| return 0; |
| } |
| |
| bccAssert(ExportForEachMetadata->getNumOperands() > 0); |
| |
| // We only handle the case for legacy root() functions here, so this is |
| // hard-coded to look at only the first such function. |
| llvm::MDNode *SigNode = ExportForEachMetadata->getOperand(0); |
| if (SigNode != NULL && SigNode->getNumOperands() == 1) { |
| llvm::Value *SigVal = SigNode->getOperand(0); |
| if (SigVal->getValueID() == llvm::Value::MDStringVal) { |
| llvm::StringRef SigString = |
| static_cast<llvm::MDString*>(SigVal)->getString(); |
| uint32_t Signature = 0; |
| if (SigString.getAsInteger(10, Signature)) { |
| ALOGE("Non-integer signature value '%s'", SigString.str().c_str()); |
| return 0; |
| } |
| return Signature; |
| } |
| } |
| |
| return 0; |
| } |
| |
| // Get the actual value we should use to step through an allocation. |
| // |
| // Normally the value we use to step through an allocation is given to us by |
| // the driver. However, for certain primitive data types, we can derive an |
| // integer constant for the step value. We use this integer constant whenever |
| // possible to allow further compiler optimizations to take place. |
| // |
| // DL - Target Data size/layout information. |
| // T - Type of allocation (should be a pointer). |
| // OrigStep - Original step increment (root.expand() input from driver). |
| llvm::Value *getStepValue(llvm::DataLayout *DL, llvm::Type *T, |
| llvm::Value *OrigStep) { |
| bccAssert(DL); |
| bccAssert(T); |
| bccAssert(OrigStep); |
| llvm::PointerType *PT = llvm::dyn_cast<llvm::PointerType>(T); |
| llvm::Type *VoidPtrTy = llvm::Type::getInt8PtrTy(*C); |
| if (mEnableStepOpt && T != VoidPtrTy && PT) { |
| llvm::Type *ET = PT->getElementType(); |
| uint64_t ETSize = DL->getTypeAllocSize(ET); |
| llvm::Type *Int32Ty = llvm::Type::getInt32Ty(*C); |
| return llvm::ConstantInt::get(Int32Ty, ETSize); |
| } else { |
| return OrigStep; |
| } |
| } |
| |
| /// @brief Returns the type of the ForEach stub parameter structure. |
| /// |
| /// Renderscript uses a single structure in which all parameters are passed |
| /// to keep the signature of the expanded function independent of the |
| /// parameters passed to it. |
| llvm::Type *getForeachStubTy() { |
| llvm::Type *VoidPtrTy = llvm::Type::getInt8PtrTy(*C); |
| llvm::Type *Int32Ty = llvm::Type::getInt32Ty(*C); |
| llvm::Type *SizeTy = Int32Ty; |
| /* Defined in frameworks/base/libs/rs/rs_hal.h: |
| * |
| * struct RsForEachStubParamStruct { |
| * const void *in; |
| * void *out; |
| * const void *usr; |
| * size_t usr_len; |
| * uint32_t x; |
| * uint32_t y; |
| * uint32_t z; |
| * uint32_t lod; |
| * enum RsAllocationCubemapFace face; |
| * uint32_t ar[16]; |
| * }; |
| */ |
| llvm::SmallVector<llvm::Type*, 9> StructTys; |
| StructTys.push_back(VoidPtrTy); // const void *in |
| StructTys.push_back(VoidPtrTy); // void *out |
| StructTys.push_back(VoidPtrTy); // const void *usr |
| StructTys.push_back(SizeTy); // size_t usr_len |
| StructTys.push_back(Int32Ty); // uint32_t x |
| StructTys.push_back(Int32Ty); // uint32_t y |
| StructTys.push_back(Int32Ty); // uint32_t z |
| StructTys.push_back(Int32Ty); // uint32_t lod |
| StructTys.push_back(Int32Ty); // enum RsAllocationCubemapFace |
| StructTys.push_back(llvm::ArrayType::get(Int32Ty, 16)); // uint32_t ar[16] |
| |
| return llvm::StructType::create(StructTys, "RsForEachStubParamStruct"); |
| } |
| |
| /// @brief Create skeleton of the expanded function. |
| /// |
| /// This creates a function with the following signature: |
| /// |
| /// void (const RsForEachStubParamStruct *p, uint32_t x1, uint32_t x2, |
| /// uint32_t instep, uint32_t outstep) |
| /// |
| llvm::Function *createEmptyExpandedFunction(llvm::StringRef OldName) { |
| llvm::Type *ForEachStubPtrTy = getForeachStubTy()->getPointerTo(); |
| llvm::Type *Int32Ty = llvm::Type::getInt32Ty(*C); |
| |
| llvm::SmallVector<llvm::Type*, 8> ParamTys; |
| ParamTys.push_back(ForEachStubPtrTy); // const RsForEachStubParamStruct *p |
| ParamTys.push_back(Int32Ty); // uint32_t x1 |
| ParamTys.push_back(Int32Ty); // uint32_t x2 |
| ParamTys.push_back(Int32Ty); // uint32_t instep |
| ParamTys.push_back(Int32Ty); // uint32_t outstep |
| |
| llvm::FunctionType *FT = |
| llvm::FunctionType::get(llvm::Type::getVoidTy(*C), ParamTys, false); |
| llvm::Function *F = |
| llvm::Function::Create(FT, llvm::GlobalValue::ExternalLinkage, |
| OldName + ".expand", M); |
| |
| llvm::Function::arg_iterator AI = F->arg_begin(); |
| |
| AI->setName("p"); |
| AI++; |
| AI->setName("x1"); |
| AI++; |
| AI->setName("x2"); |
| AI++; |
| AI->setName("arg_instep"); |
| AI++; |
| AI->setName("arg_outstep"); |
| AI++; |
| |
| assert(AI == F->arg_end()); |
| |
| llvm::BasicBlock *Begin = llvm::BasicBlock::Create(*C, "Begin", F); |
| llvm::IRBuilder<> Builder(Begin); |
| Builder.CreateRetVoid(); |
| |
| return F; |
| } |
| |
| /// @brief Create an empty loop |
| /// |
| /// Create a loop of the form: |
| /// |
| /// for (i = LowerBound; i < UpperBound; i++) |
| /// ; |
| /// |
| /// After the loop has been created, the builder is set such that |
| /// instructions can be added to the loop body. |
| /// |
| /// @param Builder The builder to use to build this loop. The current |
| /// position of the builder is the position the loop |
| /// will be inserted. |
| /// @param LowerBound The first value of the loop iterator |
| /// @param UpperBound The maximal value of the loop iterator |
| /// @param LoopIV A reference that will be set to the loop iterator. |
| /// @return The BasicBlock that will be executed after the loop. |
| llvm::BasicBlock *createLoop(llvm::IRBuilder<> &Builder, |
| llvm::Value *LowerBound, |
| llvm::Value *UpperBound, |
| llvm::PHINode **LoopIV) { |
| assert(LowerBound->getType() == UpperBound->getType()); |
| |
| llvm::BasicBlock *CondBB, *AfterBB, *HeaderBB; |
| llvm::Value *Cond, *IVNext; |
| llvm::PHINode *IV; |
| |
| CondBB = Builder.GetInsertBlock(); |
| AfterBB = llvm::SplitBlock(CondBB, Builder.GetInsertPoint(), this); |
| HeaderBB = llvm::BasicBlock::Create(*C, "Loop", CondBB->getParent()); |
| |
| // if (LowerBound < Upperbound) |
| // goto LoopHeader |
| // else |
| // goto AfterBB |
| CondBB->getTerminator()->eraseFromParent(); |
| Builder.SetInsertPoint(CondBB); |
| Cond = Builder.CreateICmpULT(LowerBound, UpperBound); |
| Builder.CreateCondBr(Cond, HeaderBB, AfterBB); |
| |
| // iv = PHI [CondBB -> LowerBound], [LoopHeader -> NextIV ] |
| // iv.next = iv + 1 |
| // if (iv.next < Upperbound) |
| // goto LoopHeader |
| // else |
| // goto AfterBB |
| Builder.SetInsertPoint(HeaderBB); |
| IV = Builder.CreatePHI(LowerBound->getType(), 2, "X"); |
| IV->addIncoming(LowerBound, CondBB); |
| IVNext = Builder.CreateNUWAdd(IV, Builder.getInt32(1)); |
| IV->addIncoming(IVNext, HeaderBB); |
| Cond = Builder.CreateICmpULT(IVNext, UpperBound); |
| Builder.CreateCondBr(Cond, HeaderBB, AfterBB); |
| AfterBB->setName("Exit"); |
| Builder.SetInsertPoint(HeaderBB->getFirstNonPHI()); |
| *LoopIV = IV; |
| return AfterBB; |
| } |
| |
| public: |
| RSForEachExpandPass(const RSInfo::ExportForeachFuncListTy &pForeachFuncs, |
| bool pEnableStepOpt) |
| : ModulePass(ID), M(NULL), C(NULL), mFuncs(pForeachFuncs), |
| mEnableStepOpt(pEnableStepOpt) { |
| } |
| |
| /* Performs the actual optimization on a selected function. On success, the |
| * Module will contain a new function of the name "<NAME>.expand" that |
| * invokes <NAME>() in a loop with the appropriate parameters. |
| */ |
| bool ExpandFunction(llvm::Function *F, uint32_t Signature) { |
| ALOGV("Expanding ForEach-able Function %s", F->getName().str().c_str()); |
| |
| if (!Signature) { |
| Signature = getRootSignature(F); |
| if (!Signature) { |
| // We couldn't determine how to expand this function based on its |
| // function signature. |
| return false; |
| } |
| } |
| |
| llvm::DataLayout DL(M); |
| |
| llvm::Function *ExpandedFunc = createEmptyExpandedFunction(F->getName()); |
| |
| // Create and name the actual arguments to this expanded function. |
| llvm::SmallVector<llvm::Argument*, 8> ArgVec; |
| for (llvm::Function::arg_iterator B = ExpandedFunc->arg_begin(), |
| E = ExpandedFunc->arg_end(); |
| B != E; |
| ++B) { |
| ArgVec.push_back(B); |
| } |
| |
| if (ArgVec.size() != 5) { |
| ALOGE("Incorrect number of arguments to function: %zu", |
| ArgVec.size()); |
| return false; |
| } |
| llvm::Value *Arg_p = ArgVec[0]; |
| llvm::Value *Arg_x1 = ArgVec[1]; |
| llvm::Value *Arg_x2 = ArgVec[2]; |
| llvm::Value *Arg_instep = ArgVec[3]; |
| llvm::Value *Arg_outstep = ArgVec[4]; |
| |
| llvm::Value *InStep = NULL; |
| llvm::Value *OutStep = NULL; |
| |
| // Construct the actual function body. |
| llvm::IRBuilder<> Builder(ExpandedFunc->getEntryBlock().begin()); |
| |
| // Collect and construct the arguments for the kernel(). |
| // Note that we load any loop-invariant arguments before entering the Loop. |
| llvm::Function::arg_iterator Args = F->arg_begin(); |
| |
| llvm::Type *InTy = NULL; |
| llvm::Value *InBasePtr = NULL; |
| if (bcinfo::MetadataExtractor::hasForEachSignatureIn(Signature)) { |
| InTy = Args->getType(); |
| InStep = getStepValue(&DL, InTy, Arg_instep); |
| InStep->setName("instep"); |
| InBasePtr = Builder.CreateLoad(Builder.CreateStructGEP(Arg_p, 0)); |
| Args++; |
| } |
| |
| llvm::Type *OutTy = NULL; |
| llvm::Value *OutBasePtr = NULL; |
| if (bcinfo::MetadataExtractor::hasForEachSignatureOut(Signature)) { |
| OutTy = Args->getType(); |
| OutStep = getStepValue(&DL, OutTy, Arg_outstep); |
| OutStep->setName("outstep"); |
| OutBasePtr = Builder.CreateLoad(Builder.CreateStructGEP(Arg_p, 1)); |
| Args++; |
| } |
| |
| llvm::Value *UsrData = NULL; |
| if (bcinfo::MetadataExtractor::hasForEachSignatureUsrData(Signature)) { |
| llvm::Type *UsrDataTy = Args->getType(); |
| UsrData = Builder.CreatePointerCast(Builder.CreateLoad( |
| Builder.CreateStructGEP(Arg_p, 2)), UsrDataTy); |
| UsrData->setName("UsrData"); |
| Args++; |
| } |
| |
| if (bcinfo::MetadataExtractor::hasForEachSignatureX(Signature)) { |
| Args++; |
| } |
| |
| llvm::Value *Y = NULL; |
| if (bcinfo::MetadataExtractor::hasForEachSignatureY(Signature)) { |
| Y = Builder.CreateLoad(Builder.CreateStructGEP(Arg_p, 5), "Y"); |
| Args++; |
| } |
| |
| bccAssert(Args == F->arg_end()); |
| |
| llvm::PHINode *IV; |
| createLoop(Builder, Arg_x1, Arg_x2, &IV); |
| |
| // Populate the actual call to kernel(). |
| llvm::SmallVector<llvm::Value*, 8> RootArgs; |
| |
| llvm::Value *InPtr = NULL; |
| llvm::Value *OutPtr = NULL; |
| |
| // Calculate the current input and output pointers |
| // |
| // We always calculate the input/output pointers with a GEP operating on i8 |
| // values and only cast at the very end to OutTy. This is because the step |
| // between two values is given in bytes. |
| // |
| // TODO: We could further optimize the output by using a GEP operation of |
| // type 'OutTy' in cases where the element type of the allocation allows. |
| if (OutBasePtr) { |
| llvm::Value *OutOffset = Builder.CreateSub(IV, Arg_x1); |
| OutOffset = Builder.CreateMul(OutOffset, OutStep); |
| OutPtr = Builder.CreateGEP(OutBasePtr, OutOffset); |
| OutPtr = Builder.CreatePointerCast(OutPtr, OutTy); |
| } |
| if (InBasePtr) { |
| llvm::Value *InOffset = Builder.CreateSub(IV, Arg_x1); |
| InOffset = Builder.CreateMul(InOffset, InStep); |
| InPtr = Builder.CreateGEP(InBasePtr, InOffset); |
| InPtr = Builder.CreatePointerCast(InPtr, InTy); |
| } |
| |
| if (InPtr) { |
| RootArgs.push_back(InPtr); |
| } |
| |
| if (OutPtr) { |
| RootArgs.push_back(OutPtr); |
| } |
| |
| if (UsrData) { |
| RootArgs.push_back(UsrData); |
| } |
| |
| llvm::Value *X = IV; |
| if (bcinfo::MetadataExtractor::hasForEachSignatureX(Signature)) { |
| RootArgs.push_back(X); |
| } |
| |
| if (Y) { |
| RootArgs.push_back(Y); |
| } |
| |
| Builder.CreateCall(F, RootArgs); |
| |
| return true; |
| } |
| |
| /* Expand a pass-by-value kernel. |
| */ |
| bool ExpandKernel(llvm::Function *F, uint32_t Signature) { |
| bccAssert(bcinfo::MetadataExtractor::hasForEachSignatureKernel(Signature)); |
| ALOGV("Expanding kernel Function %s", F->getName().str().c_str()); |
| |
| // TODO: Refactor this to share functionality with ExpandFunction. |
| llvm::DataLayout DL(M); |
| |
| llvm::Function *ExpandedFunc = createEmptyExpandedFunction(F->getName()); |
| |
| // Create and name the actual arguments to this expanded function. |
| llvm::SmallVector<llvm::Argument*, 8> ArgVec; |
| for (llvm::Function::arg_iterator B = ExpandedFunc->arg_begin(), |
| E = ExpandedFunc->arg_end(); |
| B != E; |
| ++B) { |
| ArgVec.push_back(B); |
| } |
| |
| if (ArgVec.size() != 5) { |
| ALOGE("Incorrect number of arguments to function: %zu", |
| ArgVec.size()); |
| return false; |
| } |
| llvm::Value *Arg_p = ArgVec[0]; |
| llvm::Value *Arg_x1 = ArgVec[1]; |
| llvm::Value *Arg_x2 = ArgVec[2]; |
| llvm::Value *Arg_instep = ArgVec[3]; |
| llvm::Value *Arg_outstep = ArgVec[4]; |
| |
| llvm::Value *InStep = NULL; |
| llvm::Value *OutStep = NULL; |
| |
| // Construct the actual function body. |
| llvm::IRBuilder<> Builder(ExpandedFunc->getEntryBlock().begin()); |
| |
| // Create TBAA meta-data. |
| llvm::MDNode *TBAARenderScript, *TBAAAllocation, *TBAAPointer; |
| |
| llvm::MDBuilder MDHelper(*C); |
| TBAARenderScript = MDHelper.createTBAARoot("RenderScript TBAA"); |
| TBAAAllocation = MDHelper.createTBAANode("allocation", TBAARenderScript); |
| TBAAPointer = MDHelper.createTBAANode("pointer", TBAARenderScript); |
| |
| // Collect and construct the arguments for the kernel(). |
| // Note that we load any loop-invariant arguments before entering the Loop. |
| llvm::Function::arg_iterator Args = F->arg_begin(); |
| |
| llvm::Type *OutTy = NULL; |
| bool PassOutByReference = false; |
| llvm::LoadInst *OutBasePtr = NULL; |
| if (bcinfo::MetadataExtractor::hasForEachSignatureOut(Signature)) { |
| llvm::Type *OutBaseTy = F->getReturnType(); |
| if (OutBaseTy->isVoidTy()) { |
| PassOutByReference = true; |
| OutTy = Args->getType(); |
| Args++; |
| } else { |
| OutTy = OutBaseTy->getPointerTo(); |
| // We don't increment Args, since we are using the actual return type. |
| } |
| OutStep = getStepValue(&DL, OutTy, Arg_outstep); |
| OutStep->setName("outstep"); |
| OutBasePtr = Builder.CreateLoad(Builder.CreateStructGEP(Arg_p, 1)); |
| OutBasePtr->setMetadata("tbaa", TBAAPointer); |
| } |
| |
| llvm::Type *InBaseTy = NULL; |
| llvm::Type *InTy = NULL; |
| llvm::LoadInst *InBasePtr = NULL; |
| if (bcinfo::MetadataExtractor::hasForEachSignatureIn(Signature)) { |
| InBaseTy = Args->getType(); |
| InTy =InBaseTy->getPointerTo(); |
| InStep = getStepValue(&DL, InTy, Arg_instep); |
| InStep->setName("instep"); |
| InBasePtr = Builder.CreateLoad(Builder.CreateStructGEP(Arg_p, 0)); |
| InBasePtr->setMetadata("tbaa", TBAAPointer); |
| Args++; |
| } |
| |
| // No usrData parameter on kernels. |
| bccAssert( |
| !bcinfo::MetadataExtractor::hasForEachSignatureUsrData(Signature)); |
| |
| if (bcinfo::MetadataExtractor::hasForEachSignatureX(Signature)) { |
| Args++; |
| } |
| |
| llvm::Value *Y = NULL; |
| if (bcinfo::MetadataExtractor::hasForEachSignatureY(Signature)) { |
| Y = Builder.CreateLoad(Builder.CreateStructGEP(Arg_p, 5), "Y"); |
| Args++; |
| } |
| |
| bccAssert(Args == F->arg_end()); |
| |
| llvm::PHINode *IV; |
| createLoop(Builder, Arg_x1, Arg_x2, &IV); |
| |
| // Populate the actual call to kernel(). |
| llvm::SmallVector<llvm::Value*, 8> RootArgs; |
| |
| llvm::Value *InPtr = NULL; |
| llvm::Value *OutPtr = NULL; |
| |
| // Calculate the current input and output pointers |
| // |
| // We always calculate the input/output pointers with a GEP operating on i8 |
| // values and only cast at the very end to OutTy. This is because the step |
| // between two values is given in bytes. |
| // |
| // TODO: We could further optimize the output by using a GEP operation of |
| // type 'OutTy' in cases where the element type of the allocation allows. |
| if (OutBasePtr) { |
| llvm::Value *OutOffset = Builder.CreateSub(IV, Arg_x1); |
| OutOffset = Builder.CreateMul(OutOffset, OutStep); |
| OutPtr = Builder.CreateGEP(OutBasePtr, OutOffset); |
| OutPtr = Builder.CreatePointerCast(OutPtr, OutTy); |
| } |
| if (InBasePtr) { |
| llvm::Value *InOffset = Builder.CreateSub(IV, Arg_x1); |
| InOffset = Builder.CreateMul(InOffset, InStep); |
| InPtr = Builder.CreateGEP(InBasePtr, InOffset); |
| InPtr = Builder.CreatePointerCast(InPtr, InTy); |
| } |
| |
| if (PassOutByReference) { |
| RootArgs.push_back(OutPtr); |
| } |
| |
| if (InPtr) { |
| llvm::LoadInst *In = Builder.CreateLoad(InPtr, "In"); |
| In->setMetadata("tbaa", TBAAAllocation); |
| RootArgs.push_back(In); |
| } |
| |
| llvm::Value *X = IV; |
| if (bcinfo::MetadataExtractor::hasForEachSignatureX(Signature)) { |
| RootArgs.push_back(X); |
| } |
| |
| if (Y) { |
| RootArgs.push_back(Y); |
| } |
| |
| llvm::Value *RetVal = Builder.CreateCall(F, RootArgs); |
| |
| if (OutPtr && !PassOutByReference) { |
| llvm::StoreInst *Store = Builder.CreateStore(RetVal, OutPtr); |
| Store->setMetadata("tbaa", TBAAAllocation); |
| } |
| |
| return true; |
| } |
| |
| /// @brief Checks if pointers to allocation internals are exposed |
| /// |
| /// This function verifies if through the parameters passed to the kernel |
| /// or through calls to the runtime library the script gains access to |
| /// pointers pointing to data within a RenderScript Allocation. |
| /// If we know we control all loads from and stores to data within |
| /// RenderScript allocations and if we know the run-time internal accesses |
| /// are all annotated with RenderScript TBAA metadata, only then we |
| /// can safely use TBAA to distinguish between generic and from-allocation |
| /// pointers. |
| bool allocPointersExposed(llvm::Module &M) { |
| // Old style kernel function can expose pointers to elements within |
| // allocations. |
| // TODO: Extend analysis to allow simple cases of old-style kernels. |
| for (RSInfo::ExportForeachFuncListTy::const_iterator |
| func_iter = mFuncs.begin(), func_end = mFuncs.end(); |
| func_iter != func_end; func_iter++) { |
| const char *Name = func_iter->first; |
| uint32_t Signature = func_iter->second; |
| if (M.getFunction(Name) && |
| !bcinfo::MetadataExtractor::hasForEachSignatureKernel(Signature)) { |
| return true; |
| } |
| } |
| |
| // Check for library functions that expose a pointer to an Allocation or |
| // that are not yet annotated with RenderScript-specific tbaa information. |
| static std::vector<std::string> Funcs; |
| |
| // rsGetElementAt(...) |
| Funcs.push_back("_Z14rsGetElementAt13rs_allocationj"); |
| Funcs.push_back("_Z14rsGetElementAt13rs_allocationjj"); |
| Funcs.push_back("_Z14rsGetElementAt13rs_allocationjjj"); |
| // rsSetElementAt() |
| Funcs.push_back("_Z14rsSetElementAt13rs_allocationPvj"); |
| Funcs.push_back("_Z14rsSetElementAt13rs_allocationPvjj"); |
| Funcs.push_back("_Z14rsSetElementAt13rs_allocationPvjjj"); |
| // rsGetElementAtYuv_uchar_Y() |
| Funcs.push_back("_Z25rsGetElementAtYuv_uchar_Y13rs_allocationjj"); |
| // rsGetElementAtYuv_uchar_U() |
| Funcs.push_back("_Z25rsGetElementAtYuv_uchar_U13rs_allocationjj"); |
| // rsGetElementAtYuv_uchar_V() |
| Funcs.push_back("_Z25rsGetElementAtYuv_uchar_V13rs_allocationjj"); |
| |
| for (std::vector<std::string>::iterator FI = Funcs.begin(), |
| FE = Funcs.end(); |
| FI != FE; ++FI) { |
| llvm::Function *F = M.getFunction(*FI); |
| |
| if (!F) { |
| ALOGE("Missing run-time function '%s'", FI->c_str()); |
| return true; |
| } |
| |
| if (F->getNumUses() > 0) { |
| return true; |
| } |
| } |
| |
| return false; |
| } |
| |
| /// @brief Connect RenderScript TBAA metadata to C/C++ metadata |
| /// |
| /// The TBAA metadata used to annotate loads/stores from RenderScript |
| /// Allocations is generated in a separate TBAA tree with a "RenderScript TBAA" |
| /// root node. LLVM does assume may-alias for all nodes in unrelated alias |
| /// analysis trees. This function makes the RenderScript TBAA a subtree of the |
| /// normal C/C++ TBAA tree aside of normal C/C++ types. With the connected trees |
| /// every access to an Allocation is resolved to must-alias if compared to |
| /// a normal C/C++ access. |
| void connectRenderScriptTBAAMetadata(llvm::Module &M) { |
| llvm::MDBuilder MDHelper(*C); |
| llvm::MDNode *TBAARenderScript = MDHelper.createTBAARoot("RenderScript TBAA"); |
| |
| llvm::MDNode *TBAARoot = MDHelper.createTBAARoot("Simple C/C++ TBAA"); |
| llvm::MDNode *TBAAMergedRS = MDHelper.createTBAANode("RenderScript", TBAARoot); |
| |
| TBAARenderScript->replaceAllUsesWith(TBAAMergedRS); |
| } |
| |
| virtual bool runOnModule(llvm::Module &M) { |
| bool Changed = false; |
| this->M = &M; |
| C = &M.getContext(); |
| |
| bool AllocsExposed = allocPointersExposed(M); |
| |
| for (RSInfo::ExportForeachFuncListTy::const_iterator |
| func_iter = mFuncs.begin(), func_end = mFuncs.end(); |
| func_iter != func_end; func_iter++) { |
| const char *name = func_iter->first; |
| uint32_t signature = func_iter->second; |
| llvm::Function *kernel = M.getFunction(name); |
| if (kernel) { |
| if (bcinfo::MetadataExtractor::hasForEachSignatureKernel(signature)) { |
| Changed |= ExpandKernel(kernel, signature); |
| kernel->setLinkage(llvm::GlobalValue::InternalLinkage); |
| } else if (kernel->getReturnType()->isVoidTy()) { |
| Changed |= ExpandFunction(kernel, signature); |
| kernel->setLinkage(llvm::GlobalValue::InternalLinkage); |
| } else { |
| // There are some graphics root functions that are not |
| // expanded, but that will be called directly. For those |
| // functions, we can not set the linkage to internal. |
| } |
| } |
| } |
| |
| if (!AllocsExposed) { |
| connectRenderScriptTBAAMetadata(M); |
| } |
| |
| return Changed; |
| } |
| |
| virtual const char *getPassName() const { |
| return "ForEach-able Function Expansion"; |
| } |
| |
| }; // end RSForEachExpandPass |
| |
| } // end anonymous namespace |
| |
| char RSForEachExpandPass::ID = 0; |
| |
| namespace bcc { |
| |
| llvm::ModulePass * |
| createRSForEachExpandPass(const RSInfo::ExportForeachFuncListTy &pForeachFuncs, |
| bool pEnableStepOpt){ |
| return new RSForEachExpandPass(pForeachFuncs, pEnableStepOpt); |
| } |
| |
| } // end namespace bcc |