| /* | |
| * Copyright (C) 2014 The Android Open Source Project | |
| * | |
| * Licensed under the Apache License, Version 2.0 (the "License"); | |
| * you may not use this file except in compliance with the License. | |
| * You may obtain a copy of the License at | |
| * | |
| * http://www.apache.org/licenses/LICENSE-2.0 | |
| * | |
| * Unless required by applicable law or agreed to in writing, software | |
| * distributed under the License is distributed on an "AS IS" BASIS, | |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| * See the License for the specific language governing permissions and | |
| * limitations under the License. | |
| */ | |
| #include "RenderNode.h" | |
| #include "DamageAccumulator.h" | |
| #include "Debug.h" | |
| #if HWUI_NEW_OPS | |
| #include "RecordedOp.h" | |
| #include "BakedOpRenderer.h" | |
| #endif | |
| #include "DisplayListOp.h" | |
| #include "LayerRenderer.h" | |
| #include "OpenGLRenderer.h" | |
| #include "TreeInfo.h" | |
| #include "utils/MathUtils.h" | |
| #include "utils/TraceUtils.h" | |
| #include "renderthread/CanvasContext.h" | |
| #include "protos/hwui.pb.h" | |
| #include "protos/ProtoHelpers.h" | |
| #include <algorithm> | |
| #include <sstream> | |
| #include <string> | |
| namespace android { | |
| namespace uirenderer { | |
| void RenderNode::debugDumpLayers(const char* prefix) { | |
| #if HWUI_NEW_OPS | |
| LOG_ALWAYS_FATAL("TODO: dump layer"); | |
| #else | |
| if (mLayer) { | |
| ALOGD("%sNode %p (%s) has layer %p (fbo = %u, wasBuildLayered = %s)", | |
| prefix, this, getName(), mLayer, mLayer->getFbo(), | |
| mLayer->wasBuildLayered ? "true" : "false"); | |
| } | |
| #endif | |
| if (mDisplayList) { | |
| for (auto&& child : mDisplayList->getChildren()) { | |
| child->renderNode->debugDumpLayers(prefix); | |
| } | |
| } | |
| } | |
| RenderNode::RenderNode() | |
| : mDirtyPropertyFields(0) | |
| , mNeedsDisplayListSync(false) | |
| , mDisplayList(nullptr) | |
| , mStagingDisplayList(nullptr) | |
| , mAnimatorManager(*this) | |
| , mParentCount(0) { | |
| } | |
| RenderNode::~RenderNode() { | |
| deleteDisplayList(); | |
| delete mStagingDisplayList; | |
| #if HWUI_NEW_OPS | |
| LOG_ALWAYS_FATAL_IF(mLayer, "layer missed detachment!"); | |
| #else | |
| if (mLayer) { | |
| ALOGW("Memory Warning: Layer %p missed its detachment, held on to for far too long!", mLayer); | |
| mLayer->postDecStrong(); | |
| mLayer = nullptr; | |
| } | |
| #endif | |
| } | |
| void RenderNode::setStagingDisplayList(DisplayList* displayList) { | |
| mNeedsDisplayListSync = true; | |
| delete mStagingDisplayList; | |
| mStagingDisplayList = displayList; | |
| // If mParentCount == 0 we are the sole reference to this RenderNode, | |
| // so immediately free the old display list | |
| if (!mParentCount && !mStagingDisplayList) { | |
| deleteDisplayList(); | |
| } | |
| } | |
| /** | |
| * This function is a simplified version of replay(), where we simply retrieve and log the | |
| * display list. This function should remain in sync with the replay() function. | |
| */ | |
| void RenderNode::output(uint32_t level) { | |
| ALOGD("%*sStart display list (%p, %s%s%s%s%s%s)", (level - 1) * 2, "", this, | |
| getName(), | |
| (MathUtils::isZero(properties().getAlpha()) ? ", zero alpha" : ""), | |
| (properties().hasShadow() ? ", casting shadow" : ""), | |
| (isRenderable() ? "" : ", empty"), | |
| (properties().getProjectBackwards() ? ", projected" : ""), | |
| (mLayer != nullptr ? ", on HW Layer" : "")); | |
| ALOGD("%*s%s %d", level * 2, "", "Save", SaveFlags::MatrixClip); | |
| properties().debugOutputProperties(level); | |
| if (mDisplayList) { | |
| #if HWUI_NEW_OPS | |
| LOG_ALWAYS_FATAL("op dumping unsupported"); | |
| #else | |
| // TODO: consider printing the chunk boundaries here | |
| for (auto&& op : mDisplayList->getOps()) { | |
| op->output(level, DisplayListOp::kOpLogFlag_Recurse); | |
| } | |
| #endif | |
| } | |
| ALOGD("%*sDone (%p, %s)", (level - 1) * 2, "", this, getName()); | |
| } | |
| void RenderNode::copyTo(proto::RenderNode *pnode) { | |
| pnode->set_id(static_cast<uint64_t>( | |
| reinterpret_cast<uintptr_t>(this))); | |
| pnode->set_name(mName.string(), mName.length()); | |
| proto::RenderProperties* pprops = pnode->mutable_properties(); | |
| pprops->set_left(properties().getLeft()); | |
| pprops->set_top(properties().getTop()); | |
| pprops->set_right(properties().getRight()); | |
| pprops->set_bottom(properties().getBottom()); | |
| pprops->set_clip_flags(properties().getClippingFlags()); | |
| pprops->set_alpha(properties().getAlpha()); | |
| pprops->set_translation_x(properties().getTranslationX()); | |
| pprops->set_translation_y(properties().getTranslationY()); | |
| pprops->set_translation_z(properties().getTranslationZ()); | |
| pprops->set_elevation(properties().getElevation()); | |
| pprops->set_rotation(properties().getRotation()); | |
| pprops->set_rotation_x(properties().getRotationX()); | |
| pprops->set_rotation_y(properties().getRotationY()); | |
| pprops->set_scale_x(properties().getScaleX()); | |
| pprops->set_scale_y(properties().getScaleY()); | |
| pprops->set_pivot_x(properties().getPivotX()); | |
| pprops->set_pivot_y(properties().getPivotY()); | |
| pprops->set_has_overlapping_rendering(properties().getHasOverlappingRendering()); | |
| pprops->set_pivot_explicitly_set(properties().isPivotExplicitlySet()); | |
| pprops->set_project_backwards(properties().getProjectBackwards()); | |
| pprops->set_projection_receiver(properties().isProjectionReceiver()); | |
| set(pprops->mutable_clip_bounds(), properties().getClipBounds()); | |
| const Outline& outline = properties().getOutline(); | |
| if (outline.getType() != Outline::Type::None) { | |
| proto::Outline* poutline = pprops->mutable_outline(); | |
| poutline->clear_path(); | |
| if (outline.getType() == Outline::Type::Empty) { | |
| poutline->set_type(proto::Outline_Type_Empty); | |
| } else if (outline.getType() == Outline::Type::ConvexPath) { | |
| poutline->set_type(proto::Outline_Type_ConvexPath); | |
| if (const SkPath* path = outline.getPath()) { | |
| set(poutline->mutable_path(), *path); | |
| } | |
| } else if (outline.getType() == Outline::Type::RoundRect) { | |
| poutline->set_type(proto::Outline_Type_RoundRect); | |
| } else { | |
| ALOGW("Uknown outline type! %d", static_cast<int>(outline.getType())); | |
| poutline->set_type(proto::Outline_Type_None); | |
| } | |
| poutline->set_should_clip(outline.getShouldClip()); | |
| poutline->set_alpha(outline.getAlpha()); | |
| poutline->set_radius(outline.getRadius()); | |
| set(poutline->mutable_bounds(), outline.getBounds()); | |
| } else { | |
| pprops->clear_outline(); | |
| } | |
| const RevealClip& revealClip = properties().getRevealClip(); | |
| if (revealClip.willClip()) { | |
| proto::RevealClip* prevealClip = pprops->mutable_reveal_clip(); | |
| prevealClip->set_x(revealClip.getX()); | |
| prevealClip->set_y(revealClip.getY()); | |
| prevealClip->set_radius(revealClip.getRadius()); | |
| } else { | |
| pprops->clear_reveal_clip(); | |
| } | |
| pnode->clear_children(); | |
| if (mDisplayList) { | |
| for (auto&& child : mDisplayList->getChildren()) { | |
| child->renderNode->copyTo(pnode->add_children()); | |
| } | |
| } | |
| } | |
| int RenderNode::getDebugSize() { | |
| int size = sizeof(RenderNode); | |
| if (mStagingDisplayList) { | |
| size += mStagingDisplayList->getUsedSize(); | |
| } | |
| if (mDisplayList && mDisplayList != mStagingDisplayList) { | |
| size += mDisplayList->getUsedSize(); | |
| } | |
| return size; | |
| } | |
| void RenderNode::prepareTree(TreeInfo& info) { | |
| ATRACE_CALL(); | |
| LOG_ALWAYS_FATAL_IF(!info.damageAccumulator, "DamageAccumulator missing"); | |
| // Functors don't correctly handle stencil usage of overdraw debugging - shove 'em in a layer. | |
| bool functorsNeedLayer = Properties::debugOverdraw; | |
| prepareTreeImpl(info, functorsNeedLayer); | |
| } | |
| void RenderNode::addAnimator(const sp<BaseRenderNodeAnimator>& animator) { | |
| mAnimatorManager.addAnimator(animator); | |
| } | |
| void RenderNode::damageSelf(TreeInfo& info) { | |
| if (isRenderable()) { | |
| if (properties().getClipDamageToBounds()) { | |
| info.damageAccumulator->dirty(0, 0, properties().getWidth(), properties().getHeight()); | |
| } else { | |
| // Hope this is big enough? | |
| // TODO: Get this from the display list ops or something | |
| info.damageAccumulator->dirty(DIRTY_MIN, DIRTY_MIN, DIRTY_MAX, DIRTY_MAX); | |
| } | |
| } | |
| } | |
| void RenderNode::prepareLayer(TreeInfo& info, uint32_t dirtyMask) { | |
| LayerType layerType = properties().effectiveLayerType(); | |
| if (CC_UNLIKELY(layerType == LayerType::RenderLayer)) { | |
| // Damage applied so far needs to affect our parent, but does not require | |
| // the layer to be updated. So we pop/push here to clear out the current | |
| // damage and get a clean state for display list or children updates to | |
| // affect, which will require the layer to be updated | |
| info.damageAccumulator->popTransform(); | |
| info.damageAccumulator->pushTransform(this); | |
| if (dirtyMask & DISPLAY_LIST) { | |
| damageSelf(info); | |
| } | |
| } | |
| } | |
| static layer_t* createLayer(RenderState& renderState, uint32_t width, uint32_t height) { | |
| #if HWUI_NEW_OPS | |
| return renderState.layerPool().get(renderState, width, height); | |
| #else | |
| return LayerRenderer::createRenderLayer(renderState, width, height); | |
| #endif | |
| } | |
| static void destroyLayer(layer_t* layer) { | |
| #if HWUI_NEW_OPS | |
| RenderState& renderState = layer->renderState; | |
| renderState.layerPool().putOrDelete(layer); | |
| #else | |
| LayerRenderer::destroyLayer(layer); | |
| #endif | |
| } | |
| static bool layerMatchesWidthAndHeight(layer_t* layer, int width, int height) { | |
| #if HWUI_NEW_OPS | |
| return layer->viewportWidth == (uint32_t) width && layer->viewportHeight == (uint32_t)height; | |
| #else | |
| return layer->layer.getWidth() == width && layer->layer.getHeight() == height; | |
| #endif | |
| } | |
| void RenderNode::pushLayerUpdate(TreeInfo& info) { | |
| LayerType layerType = properties().effectiveLayerType(); | |
| // If we are not a layer OR we cannot be rendered (eg, view was detached) | |
| // we need to destroy any Layers we may have had previously | |
| if (CC_LIKELY(layerType != LayerType::RenderLayer) || CC_UNLIKELY(!isRenderable())) { | |
| if (CC_UNLIKELY(mLayer)) { | |
| destroyLayer(mLayer); | |
| mLayer = nullptr; | |
| } | |
| return; | |
| } | |
| bool transformUpdateNeeded = false; | |
| if (!mLayer) { | |
| mLayer = createLayer(info.canvasContext.getRenderState(), getWidth(), getHeight()); | |
| #if !HWUI_NEW_OPS | |
| applyLayerPropertiesToLayer(info); | |
| #endif | |
| damageSelf(info); | |
| transformUpdateNeeded = true; | |
| } else if (!layerMatchesWidthAndHeight(mLayer, getWidth(), getHeight())) { | |
| #if HWUI_NEW_OPS | |
| RenderState& renderState = mLayer->renderState; | |
| if (properties().fitsOnLayer()) { | |
| mLayer = renderState.layerPool().resize(mLayer, getWidth(), getHeight()); | |
| } else { | |
| #else | |
| if (!LayerRenderer::resizeLayer(mLayer, getWidth(), getHeight())) { | |
| #endif | |
| destroyLayer(mLayer); | |
| mLayer = nullptr; | |
| } | |
| damageSelf(info); | |
| transformUpdateNeeded = true; | |
| } | |
| SkRect dirty; | |
| info.damageAccumulator->peekAtDirty(&dirty); | |
| if (!mLayer) { | |
| Caches::getInstance().dumpMemoryUsage(); | |
| if (info.errorHandler) { | |
| std::ostringstream err; | |
| err << "Unable to create layer for " << getName(); | |
| const int maxTextureSize = Caches::getInstance().maxTextureSize; | |
| if (getWidth() > maxTextureSize || getHeight() > maxTextureSize) { | |
| err << ", size " << getWidth() << "x" << getHeight() | |
| << " exceeds max size " << maxTextureSize; | |
| } else { | |
| err << ", see logcat for more info"; | |
| } | |
| info.errorHandler->onError(err.str()); | |
| } | |
| return; | |
| } | |
| if (transformUpdateNeeded && mLayer) { | |
| // update the transform in window of the layer to reset its origin wrt light source position | |
| Matrix4 windowTransform; | |
| info.damageAccumulator->computeCurrentTransform(&windowTransform); | |
| mLayer->setWindowTransform(windowTransform); | |
| } | |
| #if HWUI_NEW_OPS | |
| info.layerUpdateQueue->enqueueLayerWithDamage(this, dirty); | |
| #else | |
| if (dirty.intersect(0, 0, getWidth(), getHeight())) { | |
| dirty.roundOut(&dirty); | |
| mLayer->updateDeferred(this, dirty.fLeft, dirty.fTop, dirty.fRight, dirty.fBottom); | |
| } | |
| // This is not inside the above if because we may have called | |
| // updateDeferred on a previous prepare pass that didn't have a renderer | |
| if (info.renderer && mLayer->deferredUpdateScheduled) { | |
| info.renderer->pushLayerUpdate(mLayer); | |
| } | |
| #endif | |
| // There might be prefetched layers that need to be accounted for. | |
| // That might be us, so tell CanvasContext that this layer is in the | |
| // tree and should not be destroyed. | |
| info.canvasContext.markLayerInUse(this); | |
| } | |
| /** | |
| * Traverse down the the draw tree to prepare for a frame. | |
| * | |
| * MODE_FULL = UI Thread-driven (thus properties must be synced), otherwise RT driven | |
| * | |
| * While traversing down the tree, functorsNeedLayer flag is set to true if anything that uses the | |
| * stencil buffer may be needed. Views that use a functor to draw will be forced onto a layer. | |
| */ | |
| void RenderNode::prepareTreeImpl(TreeInfo& info, bool functorsNeedLayer) { | |
| info.damageAccumulator->pushTransform(this); | |
| if (info.mode == TreeInfo::MODE_FULL) { | |
| pushStagingPropertiesChanges(info); | |
| } | |
| uint32_t animatorDirtyMask = 0; | |
| if (CC_LIKELY(info.runAnimations)) { | |
| animatorDirtyMask = mAnimatorManager.animate(info); | |
| } | |
| bool willHaveFunctor = false; | |
| if (info.mode == TreeInfo::MODE_FULL && mStagingDisplayList) { | |
| willHaveFunctor = !mStagingDisplayList->getFunctors().empty(); | |
| } else if (mDisplayList) { | |
| willHaveFunctor = !mDisplayList->getFunctors().empty(); | |
| } | |
| bool childFunctorsNeedLayer = mProperties.prepareForFunctorPresence( | |
| willHaveFunctor, functorsNeedLayer); | |
| prepareLayer(info, animatorDirtyMask); | |
| if (info.mode == TreeInfo::MODE_FULL) { | |
| pushStagingDisplayListChanges(info); | |
| } | |
| prepareSubTree(info, childFunctorsNeedLayer, mDisplayList); | |
| pushLayerUpdate(info); | |
| info.damageAccumulator->popTransform(); | |
| } | |
| void RenderNode::syncProperties() { | |
| mProperties = mStagingProperties; | |
| } | |
| void RenderNode::pushStagingPropertiesChanges(TreeInfo& info) { | |
| // Push the animators first so that setupStartValueIfNecessary() is called | |
| // before properties() is trampled by stagingProperties(), as they are | |
| // required by some animators. | |
| if (CC_LIKELY(info.runAnimations)) { | |
| mAnimatorManager.pushStaging(); | |
| } | |
| if (mDirtyPropertyFields) { | |
| mDirtyPropertyFields = 0; | |
| damageSelf(info); | |
| info.damageAccumulator->popTransform(); | |
| syncProperties(); | |
| #if !HWUI_NEW_OPS | |
| applyLayerPropertiesToLayer(info); | |
| #endif | |
| // We could try to be clever and only re-damage if the matrix changed. | |
| // However, we don't need to worry about that. The cost of over-damaging | |
| // here is only going to be a single additional map rect of this node | |
| // plus a rect join(). The parent's transform (and up) will only be | |
| // performed once. | |
| info.damageAccumulator->pushTransform(this); | |
| damageSelf(info); | |
| } | |
| } | |
| #if !HWUI_NEW_OPS | |
| void RenderNode::applyLayerPropertiesToLayer(TreeInfo& info) { | |
| if (CC_LIKELY(!mLayer)) return; | |
| const LayerProperties& props = properties().layerProperties(); | |
| mLayer->setAlpha(props.alpha(), props.xferMode()); | |
| mLayer->setColorFilter(props.colorFilter()); | |
| mLayer->setBlend(props.needsBlending()); | |
| } | |
| #endif | |
| void RenderNode::syncDisplayList() { | |
| // Make sure we inc first so that we don't fluctuate between 0 and 1, | |
| // which would thrash the layer cache | |
| if (mStagingDisplayList) { | |
| for (auto&& child : mStagingDisplayList->getChildren()) { | |
| child->renderNode->incParentRefCount(); | |
| } | |
| } | |
| deleteDisplayList(); | |
| mDisplayList = mStagingDisplayList; | |
| mStagingDisplayList = nullptr; | |
| if (mDisplayList) { | |
| for (size_t i = 0; i < mDisplayList->getFunctors().size(); i++) { | |
| (*mDisplayList->getFunctors()[i])(DrawGlInfo::kModeSync, nullptr); | |
| } | |
| } | |
| } | |
| void RenderNode::pushStagingDisplayListChanges(TreeInfo& info) { | |
| if (mNeedsDisplayListSync) { | |
| mNeedsDisplayListSync = false; | |
| // Damage with the old display list first then the new one to catch any | |
| // changes in isRenderable or, in the future, bounds | |
| damageSelf(info); | |
| syncDisplayList(); | |
| damageSelf(info); | |
| } | |
| } | |
| void RenderNode::deleteDisplayList() { | |
| if (mDisplayList) { | |
| for (auto&& child : mDisplayList->getChildren()) { | |
| child->renderNode->decParentRefCount(); | |
| } | |
| } | |
| delete mDisplayList; | |
| mDisplayList = nullptr; | |
| } | |
| void RenderNode::prepareSubTree(TreeInfo& info, bool functorsNeedLayer, DisplayList* subtree) { | |
| if (subtree) { | |
| TextureCache& cache = Caches::getInstance().textureCache; | |
| info.out.hasFunctors |= subtree->getFunctors().size(); | |
| for (auto&& bitmapResource : subtree->getBitmapResources()) { | |
| void* ownerToken = &info.canvasContext; | |
| info.prepareTextures = cache.prefetchAndMarkInUse(ownerToken, bitmapResource); | |
| } | |
| for (auto&& op : subtree->getChildren()) { | |
| RenderNode* childNode = op->renderNode; | |
| #if HWUI_NEW_OPS | |
| info.damageAccumulator->pushTransform(&op->localMatrix); | |
| bool childFunctorsNeedLayer = functorsNeedLayer; // TODO! || op->mRecordedWithPotentialStencilClip; | |
| #else | |
| info.damageAccumulator->pushTransform(&op->localMatrix); | |
| bool childFunctorsNeedLayer = functorsNeedLayer | |
| // Recorded with non-rect clip, or canvas-rotated by parent | |
| || op->mRecordedWithPotentialStencilClip; | |
| #endif | |
| childNode->prepareTreeImpl(info, childFunctorsNeedLayer); | |
| info.damageAccumulator->popTransform(); | |
| } | |
| } | |
| } | |
| void RenderNode::destroyHardwareResources() { | |
| if (mLayer) { | |
| destroyLayer(mLayer); | |
| mLayer = nullptr; | |
| } | |
| if (mDisplayList) { | |
| for (auto&& child : mDisplayList->getChildren()) { | |
| child->renderNode->destroyHardwareResources(); | |
| } | |
| if (mNeedsDisplayListSync) { | |
| // Next prepare tree we are going to push a new display list, so we can | |
| // drop our current one now | |
| deleteDisplayList(); | |
| } | |
| } | |
| } | |
| void RenderNode::decParentRefCount() { | |
| LOG_ALWAYS_FATAL_IF(!mParentCount, "already 0!"); | |
| mParentCount--; | |
| if (!mParentCount) { | |
| // If a child of ours is being attached to our parent then this will incorrectly | |
| // destroy its hardware resources. However, this situation is highly unlikely | |
| // and the failure is "just" that the layer is re-created, so this should | |
| // be safe enough | |
| destroyHardwareResources(); | |
| } | |
| } | |
| /* | |
| * For property operations, we pass a savecount of 0, since the operations aren't part of the | |
| * displaylist, and thus don't have to compensate for the record-time/playback-time discrepancy in | |
| * base saveCount (i.e., how RestoreToCount uses saveCount + properties().getCount()) | |
| */ | |
| #define PROPERTY_SAVECOUNT 0 | |
| template <class T> | |
| void RenderNode::setViewProperties(OpenGLRenderer& renderer, T& handler) { | |
| #if DEBUG_DISPLAY_LIST | |
| properties().debugOutputProperties(handler.level() + 1); | |
| #endif | |
| if (properties().getLeft() != 0 || properties().getTop() != 0) { | |
| renderer.translate(properties().getLeft(), properties().getTop()); | |
| } | |
| if (properties().getStaticMatrix()) { | |
| renderer.concatMatrix(*properties().getStaticMatrix()); | |
| } else if (properties().getAnimationMatrix()) { | |
| renderer.concatMatrix(*properties().getAnimationMatrix()); | |
| } | |
| if (properties().hasTransformMatrix()) { | |
| if (properties().isTransformTranslateOnly()) { | |
| renderer.translate(properties().getTranslationX(), properties().getTranslationY()); | |
| } else { | |
| renderer.concatMatrix(*properties().getTransformMatrix()); | |
| } | |
| } | |
| const bool isLayer = properties().effectiveLayerType() != LayerType::None; | |
| int clipFlags = properties().getClippingFlags(); | |
| if (properties().getAlpha() < 1) { | |
| if (isLayer) { | |
| clipFlags &= ~CLIP_TO_BOUNDS; // bounds clipping done by layer | |
| } | |
| if (CC_LIKELY(isLayer || !properties().getHasOverlappingRendering())) { | |
| // simply scale rendering content's alpha | |
| renderer.scaleAlpha(properties().getAlpha()); | |
| } else { | |
| // savelayer needed to create an offscreen buffer | |
| Rect layerBounds(0, 0, getWidth(), getHeight()); | |
| if (clipFlags) { | |
| properties().getClippingRectForFlags(clipFlags, &layerBounds); | |
| clipFlags = 0; // all clipping done by savelayer | |
| } | |
| SaveLayerOp* op = new (handler.allocator()) SaveLayerOp( | |
| layerBounds.left, layerBounds.top, | |
| layerBounds.right, layerBounds.bottom, | |
| (int) (properties().getAlpha() * 255), | |
| SaveFlags::HasAlphaLayer | SaveFlags::ClipToLayer); | |
| handler(op, PROPERTY_SAVECOUNT, properties().getClipToBounds()); | |
| } | |
| if (CC_UNLIKELY(ATRACE_ENABLED() && properties().promotedToLayer())) { | |
| // pretend alpha always causes savelayer to warn about | |
| // performance problem affecting old versions | |
| ATRACE_FORMAT("%s alpha caused saveLayer %dx%d", getName(), | |
| static_cast<int>(getWidth()), | |
| static_cast<int>(getHeight())); | |
| } | |
| } | |
| if (clipFlags) { | |
| Rect clipRect; | |
| properties().getClippingRectForFlags(clipFlags, &clipRect); | |
| ClipRectOp* op = new (handler.allocator()) ClipRectOp( | |
| clipRect.left, clipRect.top, clipRect.right, clipRect.bottom, | |
| SkRegion::kIntersect_Op); | |
| handler(op, PROPERTY_SAVECOUNT, properties().getClipToBounds()); | |
| } | |
| // TODO: support nesting round rect clips | |
| if (mProperties.getRevealClip().willClip()) { | |
| Rect bounds; | |
| mProperties.getRevealClip().getBounds(&bounds); | |
| renderer.setClippingRoundRect(handler.allocator(), bounds, mProperties.getRevealClip().getRadius()); | |
| } else if (mProperties.getOutline().willClip()) { | |
| renderer.setClippingOutline(handler.allocator(), &(mProperties.getOutline())); | |
| } | |
| } | |
| /** | |
| * Apply property-based transformations to input matrix | |
| * | |
| * If true3dTransform is set to true, the transform applied to the input matrix will use true 4x4 | |
| * matrix computation instead of the Skia 3x3 matrix + camera hackery. | |
| */ | |
| void RenderNode::applyViewPropertyTransforms(mat4& matrix, bool true3dTransform) const { | |
| if (properties().getLeft() != 0 || properties().getTop() != 0) { | |
| matrix.translate(properties().getLeft(), properties().getTop()); | |
| } | |
| if (properties().getStaticMatrix()) { | |
| mat4 stat(*properties().getStaticMatrix()); | |
| matrix.multiply(stat); | |
| } else if (properties().getAnimationMatrix()) { | |
| mat4 anim(*properties().getAnimationMatrix()); | |
| matrix.multiply(anim); | |
| } | |
| bool applyTranslationZ = true3dTransform && !MathUtils::isZero(properties().getZ()); | |
| if (properties().hasTransformMatrix() || applyTranslationZ) { | |
| if (properties().isTransformTranslateOnly()) { | |
| matrix.translate(properties().getTranslationX(), properties().getTranslationY(), | |
| true3dTransform ? properties().getZ() : 0.0f); | |
| } else { | |
| if (!true3dTransform) { | |
| matrix.multiply(*properties().getTransformMatrix()); | |
| } else { | |
| mat4 true3dMat; | |
| true3dMat.loadTranslate( | |
| properties().getPivotX() + properties().getTranslationX(), | |
| properties().getPivotY() + properties().getTranslationY(), | |
| properties().getZ()); | |
| true3dMat.rotate(properties().getRotationX(), 1, 0, 0); | |
| true3dMat.rotate(properties().getRotationY(), 0, 1, 0); | |
| true3dMat.rotate(properties().getRotation(), 0, 0, 1); | |
| true3dMat.scale(properties().getScaleX(), properties().getScaleY(), 1); | |
| true3dMat.translate(-properties().getPivotX(), -properties().getPivotY()); | |
| matrix.multiply(true3dMat); | |
| } | |
| } | |
| } | |
| } | |
| /** | |
| * Organizes the DisplayList hierarchy to prepare for background projection reordering. | |
| * | |
| * This should be called before a call to defer() or drawDisplayList() | |
| * | |
| * Each DisplayList that serves as a 3d root builds its list of composited children, | |
| * which are flagged to not draw in the standard draw loop. | |
| */ | |
| void RenderNode::computeOrdering() { | |
| ATRACE_CALL(); | |
| mProjectedNodes.clear(); | |
| // TODO: create temporary DDLOp and call computeOrderingImpl on top DisplayList so that | |
| // transform properties are applied correctly to top level children | |
| if (mDisplayList == nullptr) return; | |
| for (unsigned int i = 0; i < mDisplayList->getChildren().size(); i++) { | |
| renderNodeOp_t* childOp = mDisplayList->getChildren()[i]; | |
| childOp->renderNode->computeOrderingImpl(childOp, &mProjectedNodes, &mat4::identity()); | |
| } | |
| } | |
| void RenderNode::computeOrderingImpl( | |
| renderNodeOp_t* opState, | |
| std::vector<renderNodeOp_t*>* compositedChildrenOfProjectionSurface, | |
| const mat4* transformFromProjectionSurface) { | |
| mProjectedNodes.clear(); | |
| if (mDisplayList == nullptr || mDisplayList->isEmpty()) return; | |
| // TODO: should avoid this calculation in most cases | |
| // TODO: just calculate single matrix, down to all leaf composited elements | |
| Matrix4 localTransformFromProjectionSurface(*transformFromProjectionSurface); | |
| localTransformFromProjectionSurface.multiply(opState->localMatrix); | |
| if (properties().getProjectBackwards()) { | |
| // composited projectee, flag for out of order draw, save matrix, and store in proj surface | |
| opState->skipInOrderDraw = true; | |
| opState->transformFromCompositingAncestor = localTransformFromProjectionSurface; | |
| compositedChildrenOfProjectionSurface->push_back(opState); | |
| } else { | |
| // standard in order draw | |
| opState->skipInOrderDraw = false; | |
| } | |
| if (mDisplayList->getChildren().size() > 0) { | |
| const bool isProjectionReceiver = mDisplayList->projectionReceiveIndex >= 0; | |
| bool haveAppliedPropertiesToProjection = false; | |
| for (unsigned int i = 0; i < mDisplayList->getChildren().size(); i++) { | |
| renderNodeOp_t* childOp = mDisplayList->getChildren()[i]; | |
| RenderNode* child = childOp->renderNode; | |
| std::vector<renderNodeOp_t*>* projectionChildren = nullptr; | |
| const mat4* projectionTransform = nullptr; | |
| if (isProjectionReceiver && !child->properties().getProjectBackwards()) { | |
| // if receiving projections, collect projecting descendant | |
| // Note that if a direct descendant is projecting backwards, we pass its | |
| // grandparent projection collection, since it shouldn't project onto its | |
| // parent, where it will already be drawing. | |
| projectionChildren = &mProjectedNodes; | |
| projectionTransform = &mat4::identity(); | |
| } else { | |
| if (!haveAppliedPropertiesToProjection) { | |
| applyViewPropertyTransforms(localTransformFromProjectionSurface); | |
| haveAppliedPropertiesToProjection = true; | |
| } | |
| projectionChildren = compositedChildrenOfProjectionSurface; | |
| projectionTransform = &localTransformFromProjectionSurface; | |
| } | |
| child->computeOrderingImpl(childOp, projectionChildren, projectionTransform); | |
| } | |
| } | |
| } | |
| class DeferOperationHandler { | |
| public: | |
| DeferOperationHandler(DeferStateStruct& deferStruct, int level) | |
| : mDeferStruct(deferStruct), mLevel(level) {} | |
| inline void operator()(DisplayListOp* operation, int saveCount, bool clipToBounds) { | |
| operation->defer(mDeferStruct, saveCount, mLevel, clipToBounds); | |
| } | |
| inline LinearAllocator& allocator() { return *(mDeferStruct.mAllocator); } | |
| inline void startMark(const char* name) {} // do nothing | |
| inline void endMark() {} | |
| inline int level() { return mLevel; } | |
| inline int replayFlags() { return mDeferStruct.mReplayFlags; } | |
| inline SkPath* allocPathForFrame() { return mDeferStruct.allocPathForFrame(); } | |
| private: | |
| DeferStateStruct& mDeferStruct; | |
| const int mLevel; | |
| }; | |
| void RenderNode::defer(DeferStateStruct& deferStruct, const int level) { | |
| DeferOperationHandler handler(deferStruct, level); | |
| issueOperations<DeferOperationHandler>(deferStruct.mRenderer, handler); | |
| } | |
| class ReplayOperationHandler { | |
| public: | |
| ReplayOperationHandler(ReplayStateStruct& replayStruct, int level) | |
| : mReplayStruct(replayStruct), mLevel(level) {} | |
| inline void operator()(DisplayListOp* operation, int saveCount, bool clipToBounds) { | |
| #if DEBUG_DISPLAY_LIST_OPS_AS_EVENTS | |
| mReplayStruct.mRenderer.eventMark(operation->name()); | |
| #endif | |
| operation->replay(mReplayStruct, saveCount, mLevel, clipToBounds); | |
| } | |
| inline LinearAllocator& allocator() { return *(mReplayStruct.mAllocator); } | |
| inline void startMark(const char* name) { | |
| mReplayStruct.mRenderer.startMark(name); | |
| } | |
| inline void endMark() { | |
| mReplayStruct.mRenderer.endMark(); | |
| } | |
| inline int level() { return mLevel; } | |
| inline int replayFlags() { return mReplayStruct.mReplayFlags; } | |
| inline SkPath* allocPathForFrame() { return mReplayStruct.allocPathForFrame(); } | |
| private: | |
| ReplayStateStruct& mReplayStruct; | |
| const int mLevel; | |
| }; | |
| void RenderNode::replay(ReplayStateStruct& replayStruct, const int level) { | |
| ReplayOperationHandler handler(replayStruct, level); | |
| issueOperations<ReplayOperationHandler>(replayStruct.mRenderer, handler); | |
| } | |
| void RenderNode::buildZSortedChildList(const DisplayList::Chunk& chunk, | |
| std::vector<ZDrawRenderNodeOpPair>& zTranslatedNodes) { | |
| #if !HWUI_NEW_OPS | |
| if (chunk.beginChildIndex == chunk.endChildIndex) return; | |
| for (unsigned int i = chunk.beginChildIndex; i < chunk.endChildIndex; i++) { | |
| DrawRenderNodeOp* childOp = mDisplayList->getChildren()[i]; | |
| RenderNode* child = childOp->renderNode; | |
| float childZ = child->properties().getZ(); | |
| if (!MathUtils::isZero(childZ) && chunk.reorderChildren) { | |
| zTranslatedNodes.push_back(ZDrawRenderNodeOpPair(childZ, childOp)); | |
| childOp->skipInOrderDraw = true; | |
| } else if (!child->properties().getProjectBackwards()) { | |
| // regular, in order drawing DisplayList | |
| childOp->skipInOrderDraw = false; | |
| } | |
| } | |
| // Z sort any 3d children (stable-ness makes z compare fall back to standard drawing order) | |
| std::stable_sort(zTranslatedNodes.begin(), zTranslatedNodes.end()); | |
| #endif | |
| } | |
| template <class T> | |
| void RenderNode::issueDrawShadowOperation(const Matrix4& transformFromParent, T& handler) { | |
| if (properties().getAlpha() <= 0.0f | |
| || properties().getOutline().getAlpha() <= 0.0f | |
| || !properties().getOutline().getPath() | |
| || properties().getScaleX() == 0 | |
| || properties().getScaleY() == 0) { | |
| // no shadow to draw | |
| return; | |
| } | |
| mat4 shadowMatrixXY(transformFromParent); | |
| applyViewPropertyTransforms(shadowMatrixXY); | |
| // Z matrix needs actual 3d transformation, so mapped z values will be correct | |
| mat4 shadowMatrixZ(transformFromParent); | |
| applyViewPropertyTransforms(shadowMatrixZ, true); | |
| const SkPath* casterOutlinePath = properties().getOutline().getPath(); | |
| const SkPath* revealClipPath = properties().getRevealClip().getPath(); | |
| if (revealClipPath && revealClipPath->isEmpty()) return; | |
| float casterAlpha = properties().getAlpha() * properties().getOutline().getAlpha(); | |
| // holds temporary SkPath to store the result of intersections | |
| SkPath* frameAllocatedPath = nullptr; | |
| const SkPath* outlinePath = casterOutlinePath; | |
| // intersect the outline with the reveal clip, if present | |
| if (revealClipPath) { | |
| frameAllocatedPath = handler.allocPathForFrame(); | |
| Op(*outlinePath, *revealClipPath, kIntersect_SkPathOp, frameAllocatedPath); | |
| outlinePath = frameAllocatedPath; | |
| } | |
| // intersect the outline with the clipBounds, if present | |
| if (properties().getClippingFlags() & CLIP_TO_CLIP_BOUNDS) { | |
| if (!frameAllocatedPath) { | |
| frameAllocatedPath = handler.allocPathForFrame(); | |
| } | |
| Rect clipBounds; | |
| properties().getClippingRectForFlags(CLIP_TO_CLIP_BOUNDS, &clipBounds); | |
| SkPath clipBoundsPath; | |
| clipBoundsPath.addRect(clipBounds.left, clipBounds.top, | |
| clipBounds.right, clipBounds.bottom); | |
| Op(*outlinePath, clipBoundsPath, kIntersect_SkPathOp, frameAllocatedPath); | |
| outlinePath = frameAllocatedPath; | |
| } | |
| DisplayListOp* shadowOp = new (handler.allocator()) DrawShadowOp( | |
| shadowMatrixXY, shadowMatrixZ, casterAlpha, outlinePath); | |
| handler(shadowOp, PROPERTY_SAVECOUNT, properties().getClipToBounds()); | |
| } | |
| #define SHADOW_DELTA 0.1f | |
| template <class T> | |
| void RenderNode::issueOperationsOf3dChildren(ChildrenSelectMode mode, | |
| const Matrix4& initialTransform, const std::vector<ZDrawRenderNodeOpPair>& zTranslatedNodes, | |
| OpenGLRenderer& renderer, T& handler) { | |
| const int size = zTranslatedNodes.size(); | |
| if (size == 0 | |
| || (mode == ChildrenSelectMode::NegativeZChildren && zTranslatedNodes[0].key > 0.0f) | |
| || (mode == ChildrenSelectMode::PositiveZChildren && zTranslatedNodes[size - 1].key < 0.0f)) { | |
| // no 3d children to draw | |
| return; | |
| } | |
| // Apply the base transform of the parent of the 3d children. This isolates | |
| // 3d children of the current chunk from transformations made in previous chunks. | |
| int rootRestoreTo = renderer.save(SaveFlags::Matrix); | |
| renderer.setGlobalMatrix(initialTransform); | |
| /** | |
| * Draw shadows and (potential) casters mostly in order, but allow the shadows of casters | |
| * with very similar Z heights to draw together. | |
| * | |
| * This way, if Views A & B have the same Z height and are both casting shadows, the shadows are | |
| * underneath both, and neither's shadow is drawn on top of the other. | |
| */ | |
| const size_t nonNegativeIndex = findNonNegativeIndex(zTranslatedNodes); | |
| size_t drawIndex, shadowIndex, endIndex; | |
| if (mode == ChildrenSelectMode::NegativeZChildren) { | |
| drawIndex = 0; | |
| endIndex = nonNegativeIndex; | |
| shadowIndex = endIndex; // draw no shadows | |
| } else { | |
| drawIndex = nonNegativeIndex; | |
| endIndex = size; | |
| shadowIndex = drawIndex; // potentially draw shadow for each pos Z child | |
| } | |
| DISPLAY_LIST_LOGD("%*s%d %s 3d children:", (handler.level() + 1) * 2, "", | |
| endIndex - drawIndex, mode == kNegativeZChildren ? "negative" : "positive"); | |
| float lastCasterZ = 0.0f; | |
| while (shadowIndex < endIndex || drawIndex < endIndex) { | |
| if (shadowIndex < endIndex) { | |
| DrawRenderNodeOp* casterOp = zTranslatedNodes[shadowIndex].value; | |
| RenderNode* caster = casterOp->renderNode; | |
| const float casterZ = zTranslatedNodes[shadowIndex].key; | |
| // attempt to render the shadow if the caster about to be drawn is its caster, | |
| // OR if its caster's Z value is similar to the previous potential caster | |
| if (shadowIndex == drawIndex || casterZ - lastCasterZ < SHADOW_DELTA) { | |
| caster->issueDrawShadowOperation(casterOp->localMatrix, handler); | |
| lastCasterZ = casterZ; // must do this even if current caster not casting a shadow | |
| shadowIndex++; | |
| continue; | |
| } | |
| } | |
| // only the actual child DL draw needs to be in save/restore, | |
| // since it modifies the renderer's matrix | |
| int restoreTo = renderer.save(SaveFlags::Matrix); | |
| DrawRenderNodeOp* childOp = zTranslatedNodes[drawIndex].value; | |
| renderer.concatMatrix(childOp->localMatrix); | |
| childOp->skipInOrderDraw = false; // this is horrible, I'm so sorry everyone | |
| handler(childOp, renderer.getSaveCount() - 1, properties().getClipToBounds()); | |
| childOp->skipInOrderDraw = true; | |
| renderer.restoreToCount(restoreTo); | |
| drawIndex++; | |
| } | |
| renderer.restoreToCount(rootRestoreTo); | |
| } | |
| template <class T> | |
| void RenderNode::issueOperationsOfProjectedChildren(OpenGLRenderer& renderer, T& handler) { | |
| DISPLAY_LIST_LOGD("%*s%d projected children:", (handler.level() + 1) * 2, "", mProjectedNodes.size()); | |
| const SkPath* projectionReceiverOutline = properties().getOutline().getPath(); | |
| int restoreTo = renderer.getSaveCount(); | |
| LinearAllocator& alloc = handler.allocator(); | |
| handler(new (alloc) SaveOp(SaveFlags::MatrixClip), | |
| PROPERTY_SAVECOUNT, properties().getClipToBounds()); | |
| // Transform renderer to match background we're projecting onto | |
| // (by offsetting canvas by translationX/Y of background rendernode, since only those are set) | |
| const DisplayListOp* op = | |
| #if HWUI_NEW_OPS | |
| nullptr; | |
| LOG_ALWAYS_FATAL("unsupported"); | |
| #else | |
| (mDisplayList->getOps()[mDisplayList->projectionReceiveIndex]); | |
| #endif | |
| const DrawRenderNodeOp* backgroundOp = reinterpret_cast<const DrawRenderNodeOp*>(op); | |
| const RenderProperties& backgroundProps = backgroundOp->renderNode->properties(); | |
| renderer.translate(backgroundProps.getTranslationX(), backgroundProps.getTranslationY()); | |
| // If the projection receiver has an outline, we mask projected content to it | |
| // (which we know, apriori, are all tessellated paths) | |
| renderer.setProjectionPathMask(alloc, projectionReceiverOutline); | |
| // draw projected nodes | |
| for (size_t i = 0; i < mProjectedNodes.size(); i++) { | |
| renderNodeOp_t* childOp = mProjectedNodes[i]; | |
| // matrix save, concat, and restore can be done safely without allocating operations | |
| int restoreTo = renderer.save(SaveFlags::Matrix); | |
| renderer.concatMatrix(childOp->transformFromCompositingAncestor); | |
| childOp->skipInOrderDraw = false; // this is horrible, I'm so sorry everyone | |
| handler(childOp, renderer.getSaveCount() - 1, properties().getClipToBounds()); | |
| childOp->skipInOrderDraw = true; | |
| renderer.restoreToCount(restoreTo); | |
| } | |
| handler(new (alloc) RestoreToCountOp(restoreTo), | |
| PROPERTY_SAVECOUNT, properties().getClipToBounds()); | |
| } | |
| /** | |
| * This function serves both defer and replay modes, and will organize the displayList's component | |
| * operations for a single frame: | |
| * | |
| * Every 'simple' state operation that affects just the matrix and alpha (or other factors of | |
| * DeferredDisplayState) may be issued directly to the renderer, but complex operations (with custom | |
| * defer logic) and operations in displayListOps are issued through the 'handler' which handles the | |
| * defer vs replay logic, per operation | |
| */ | |
| template <class T> | |
| void RenderNode::issueOperations(OpenGLRenderer& renderer, T& handler) { | |
| if (mDisplayList->isEmpty()) { | |
| DISPLAY_LIST_LOGD("%*sEmpty display list (%p, %s)", handler.level() * 2, "", | |
| this, getName()); | |
| return; | |
| } | |
| #if HWUI_NEW_OPS | |
| const bool drawLayer = false; | |
| #else | |
| const bool drawLayer = (mLayer && (&renderer != mLayer->renderer.get())); | |
| #endif | |
| // If we are updating the contents of mLayer, we don't want to apply any of | |
| // the RenderNode's properties to this issueOperations pass. Those will all | |
| // be applied when the layer is drawn, aka when this is true. | |
| const bool useViewProperties = (!mLayer || drawLayer); | |
| if (useViewProperties) { | |
| const Outline& outline = properties().getOutline(); | |
| if (properties().getAlpha() <= 0 | |
| || (outline.getShouldClip() && outline.isEmpty()) | |
| || properties().getScaleX() == 0 | |
| || properties().getScaleY() == 0) { | |
| DISPLAY_LIST_LOGD("%*sRejected display list (%p, %s)", handler.level() * 2, "", | |
| this, getName()); | |
| return; | |
| } | |
| } | |
| handler.startMark(getName()); | |
| #if DEBUG_DISPLAY_LIST | |
| const Rect& clipRect = renderer.getLocalClipBounds(); | |
| DISPLAY_LIST_LOGD("%*sStart display list (%p, %s), localClipBounds: %.0f, %.0f, %.0f, %.0f", | |
| handler.level() * 2, "", this, getName(), | |
| clipRect.left, clipRect.top, clipRect.right, clipRect.bottom); | |
| #endif | |
| LinearAllocator& alloc = handler.allocator(); | |
| int restoreTo = renderer.getSaveCount(); | |
| handler(new (alloc) SaveOp(SaveFlags::MatrixClip), | |
| PROPERTY_SAVECOUNT, properties().getClipToBounds()); | |
| DISPLAY_LIST_LOGD("%*sSave %d %d", (handler.level() + 1) * 2, "", | |
| SaveFlags::MatrixClip, restoreTo); | |
| if (useViewProperties) { | |
| setViewProperties<T>(renderer, handler); | |
| } | |
| #if HWUI_NEW_OPS | |
| LOG_ALWAYS_FATAL("legacy op traversal not supported"); | |
| #else | |
| bool quickRejected = properties().getClipToBounds() | |
| && renderer.quickRejectConservative(0, 0, properties().getWidth(), properties().getHeight()); | |
| if (!quickRejected) { | |
| Matrix4 initialTransform(*(renderer.currentTransform())); | |
| renderer.setBaseTransform(initialTransform); | |
| if (drawLayer) { | |
| handler(new (alloc) DrawLayerOp(mLayer), | |
| renderer.getSaveCount() - 1, properties().getClipToBounds()); | |
| } else { | |
| const int saveCountOffset = renderer.getSaveCount() - 1; | |
| const int projectionReceiveIndex = mDisplayList->projectionReceiveIndex; | |
| for (size_t chunkIndex = 0; chunkIndex < mDisplayList->getChunks().size(); chunkIndex++) { | |
| const DisplayList::Chunk& chunk = mDisplayList->getChunks()[chunkIndex]; | |
| std::vector<ZDrawRenderNodeOpPair> zTranslatedNodes; | |
| buildZSortedChildList(chunk, zTranslatedNodes); | |
| issueOperationsOf3dChildren(ChildrenSelectMode::NegativeZChildren, | |
| initialTransform, zTranslatedNodes, renderer, handler); | |
| for (size_t opIndex = chunk.beginOpIndex; opIndex < chunk.endOpIndex; opIndex++) { | |
| DisplayListOp *op = mDisplayList->getOps()[opIndex]; | |
| #if DEBUG_DISPLAY_LIST | |
| op->output(handler.level() + 1); | |
| #endif | |
| handler(op, saveCountOffset, properties().getClipToBounds()); | |
| if (CC_UNLIKELY(!mProjectedNodes.empty() && projectionReceiveIndex >= 0 && | |
| opIndex == static_cast<size_t>(projectionReceiveIndex))) { | |
| issueOperationsOfProjectedChildren(renderer, handler); | |
| } | |
| } | |
| issueOperationsOf3dChildren(ChildrenSelectMode::PositiveZChildren, | |
| initialTransform, zTranslatedNodes, renderer, handler); | |
| } | |
| } | |
| } | |
| #endif | |
| DISPLAY_LIST_LOGD("%*sRestoreToCount %d", (handler.level() + 1) * 2, "", restoreTo); | |
| handler(new (alloc) RestoreToCountOp(restoreTo), | |
| PROPERTY_SAVECOUNT, properties().getClipToBounds()); | |
| DISPLAY_LIST_LOGD("%*sDone (%p, %s)", handler.level() * 2, "", this, getName()); | |
| handler.endMark(); | |
| } | |
| } /* namespace uirenderer */ | |
| } /* namespace android */ |