| /* | |
| * Copyright (C) 2013 The Android Open Source Project | |
| * | |
| * Licensed under the Apache License, Version 2.0 (the "License"); | |
| * you may not use this file except in compliance with the License. | |
| * You may obtain a copy of the License at | |
| * | |
| * http://www.apache.org/licenses/LICENSE-2.0 | |
| * | |
| * Unless required by applicable law or agreed to in writing, software | |
| * distributed under the License is distributed on an "AS IS" BASIS, | |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| * See the License for the specific language governing permissions and | |
| * limitations under the License. | |
| */ | |
| #include <utils/Trace.h> | |
| #include <ui/Rect.h> | |
| #include <ui/Region.h> | |
| #include "Caches.h" | |
| #include "Debug.h" | |
| #include "DeferredDisplayList.h" | |
| #include "DisplayListOp.h" | |
| #include "OpenGLRenderer.h" | |
| #include "Properties.h" | |
| #include "utils/MathUtils.h" | |
| #if DEBUG_DEFER | |
| #define DEFER_LOGD(...) ALOGD(__VA_ARGS__) | |
| #else | |
| #define DEFER_LOGD(...) | |
| #endif | |
| namespace android { | |
| namespace uirenderer { | |
| // Depth of the save stack at the beginning of batch playback at flush time | |
| #define FLUSH_SAVE_STACK_DEPTH 2 | |
| #define DEBUG_COLOR_BARRIER 0x1f000000 | |
| #define DEBUG_COLOR_MERGEDBATCH 0x5f7f7fff | |
| #define DEBUG_COLOR_MERGEDBATCH_SOLO 0x5f7fff7f | |
| static bool avoidOverdraw() { | |
| // Don't avoid overdraw when visualizing it, since that makes it harder to | |
| // debug where it's coming from, and when the problem occurs. | |
| return !Properties::debugOverdraw; | |
| }; | |
| ///////////////////////////////////////////////////////////////////////////////// | |
| // Operation Batches | |
| ///////////////////////////////////////////////////////////////////////////////// | |
| class Batch { | |
| public: | |
| virtual void replay(OpenGLRenderer& renderer, Rect& dirty, int index) = 0; | |
| virtual ~Batch() {} | |
| virtual bool purelyDrawBatch() { return false; } | |
| virtual bool coversBounds(const Rect& bounds) { return false; } | |
| }; | |
| class DrawBatch : public Batch { | |
| public: | |
| DrawBatch(const DeferInfo& deferInfo) : mAllOpsOpaque(true), | |
| mBatchId(deferInfo.batchId), mMergeId(deferInfo.mergeId) { | |
| mOps.clear(); | |
| } | |
| virtual ~DrawBatch() { mOps.clear(); } | |
| virtual void add(DrawOp* op, const DeferredDisplayState* state, bool opaqueOverBounds) { | |
| // NOTE: ignore empty bounds special case, since we don't merge across those ops | |
| mBounds.unionWith(state->mBounds); | |
| mAllOpsOpaque &= opaqueOverBounds; | |
| mOps.push_back(OpStatePair(op, state)); | |
| } | |
| bool intersects(const Rect& rect) { | |
| if (!rect.intersects(mBounds)) return false; | |
| for (unsigned int i = 0; i < mOps.size(); i++) { | |
| if (rect.intersects(mOps[i].state->mBounds)) { | |
| #if DEBUG_DEFER | |
| DEFER_LOGD("op intersects with op %p with bounds %f %f %f %f:", mOps[i].op, | |
| mOps[i].state->mBounds.left, mOps[i].state->mBounds.top, | |
| mOps[i].state->mBounds.right, mOps[i].state->mBounds.bottom); | |
| mOps[i].op->output(2); | |
| #endif | |
| return true; | |
| } | |
| } | |
| return false; | |
| } | |
| virtual void replay(OpenGLRenderer& renderer, Rect& dirty, int index) override { | |
| DEFER_LOGD("%d replaying DrawBatch %p, with %d ops (batch id %x, merge id %p)", | |
| index, this, mOps.size(), getBatchId(), getMergeId()); | |
| for (unsigned int i = 0; i < mOps.size(); i++) { | |
| DrawOp* op = mOps[i].op; | |
| const DeferredDisplayState* state = mOps[i].state; | |
| renderer.restoreDisplayState(*state); | |
| #if DEBUG_DISPLAY_LIST_OPS_AS_EVENTS | |
| renderer.eventMark(op->name()); | |
| #endif | |
| op->applyDraw(renderer, dirty); | |
| #if DEBUG_MERGE_BEHAVIOR | |
| const Rect& bounds = state->mBounds; | |
| int batchColor = 0x1f000000; | |
| if (getBatchId() & 0x1) batchColor |= 0x0000ff; | |
| if (getBatchId() & 0x2) batchColor |= 0x00ff00; | |
| if (getBatchId() & 0x4) batchColor |= 0xff0000; | |
| renderer.drawScreenSpaceColorRect(bounds.left, bounds.top, bounds.right, bounds.bottom, | |
| batchColor); | |
| #endif | |
| } | |
| } | |
| virtual bool purelyDrawBatch() override { return true; } | |
| virtual bool coversBounds(const Rect& bounds) override { | |
| if (CC_LIKELY(!mAllOpsOpaque || !mBounds.contains(bounds) || count() == 1)) return false; | |
| Region uncovered(android::Rect(bounds.left, bounds.top, bounds.right, bounds.bottom)); | |
| for (unsigned int i = 0; i < mOps.size(); i++) { | |
| const Rect &r = mOps[i].state->mBounds; | |
| uncovered.subtractSelf(android::Rect(r.left, r.top, r.right, r.bottom)); | |
| } | |
| return uncovered.isEmpty(); | |
| } | |
| inline int getBatchId() const { return mBatchId; } | |
| inline mergeid_t getMergeId() const { return mMergeId; } | |
| inline int count() const { return mOps.size(); } | |
| protected: | |
| std::vector<OpStatePair> mOps; | |
| Rect mBounds; // union of bounds of contained ops | |
| private: | |
| bool mAllOpsOpaque; | |
| int mBatchId; | |
| mergeid_t mMergeId; | |
| }; | |
| class MergingDrawBatch : public DrawBatch { | |
| public: | |
| MergingDrawBatch(DeferInfo& deferInfo, int width, int height) : | |
| DrawBatch(deferInfo), mClipRect(width, height), | |
| mClipSideFlags(kClipSide_None) {} | |
| /* | |
| * Helper for determining if a new op can merge with a MergingDrawBatch based on their bounds | |
| * and clip side flags. Positive bounds delta means new bounds fit in old. | |
| */ | |
| static inline bool checkSide(const int currentFlags, const int newFlags, const int side, | |
| float boundsDelta) { | |
| bool currentClipExists = currentFlags & side; | |
| bool newClipExists = newFlags & side; | |
| // if current is clipped, we must be able to fit new bounds in current | |
| if (boundsDelta > 0 && currentClipExists) return false; | |
| // if new is clipped, we must be able to fit current bounds in new | |
| if (boundsDelta < 0 && newClipExists) return false; | |
| return true; | |
| } | |
| /* | |
| * Checks if a (mergeable) op can be merged into this batch | |
| * | |
| * If true, the op's multiDraw must be guaranteed to handle both ops simultaneously, so it is | |
| * important to consider all paint attributes used in the draw calls in deciding both a) if an | |
| * op tries to merge at all, and b) if the op can merge with another set of ops | |
| * | |
| * False positives can lead to information from the paints of subsequent merged operations being | |
| * dropped, so we make simplifying qualifications on the ops that can merge, per op type. | |
| */ | |
| bool canMergeWith(const DrawOp* op, const DeferredDisplayState* state) { | |
| bool isTextBatch = getBatchId() == DeferredDisplayList::kOpBatch_Text || | |
| getBatchId() == DeferredDisplayList::kOpBatch_ColorText; | |
| // Overlapping other operations is only allowed for text without shadow. For other ops, | |
| // multiDraw isn't guaranteed to overdraw correctly | |
| if (!isTextBatch || op->hasTextShadow()) { | |
| if (intersects(state->mBounds)) return false; | |
| } | |
| const DeferredDisplayState* lhs = state; | |
| const DeferredDisplayState* rhs = mOps[0].state; | |
| if (!MathUtils::areEqual(lhs->mAlpha, rhs->mAlpha)) return false; | |
| // Identical round rect clip state means both ops will clip in the same way, or not at all. | |
| // As the state objects are const, we can compare their pointers to determine mergeability | |
| if (lhs->mRoundRectClipState != rhs->mRoundRectClipState) return false; | |
| if (lhs->mProjectionPathMask != rhs->mProjectionPathMask) return false; | |
| /* Clipping compatibility check | |
| * | |
| * Exploits the fact that if a op or batch is clipped on a side, its bounds will equal its | |
| * clip for that side. | |
| */ | |
| const int currentFlags = mClipSideFlags; | |
| const int newFlags = state->mClipSideFlags; | |
| if (currentFlags != kClipSide_None || newFlags != kClipSide_None) { | |
| const Rect& opBounds = state->mBounds; | |
| float boundsDelta = mBounds.left - opBounds.left; | |
| if (!checkSide(currentFlags, newFlags, kClipSide_Left, boundsDelta)) return false; | |
| boundsDelta = mBounds.top - opBounds.top; | |
| if (!checkSide(currentFlags, newFlags, kClipSide_Top, boundsDelta)) return false; | |
| // right and bottom delta calculation reversed to account for direction | |
| boundsDelta = opBounds.right - mBounds.right; | |
| if (!checkSide(currentFlags, newFlags, kClipSide_Right, boundsDelta)) return false; | |
| boundsDelta = opBounds.bottom - mBounds.bottom; | |
| if (!checkSide(currentFlags, newFlags, kClipSide_Bottom, boundsDelta)) return false; | |
| } | |
| // if paints are equal, then modifiers + paint attribs don't need to be compared | |
| if (op->mPaint == mOps[0].op->mPaint) return true; | |
| if (PaintUtils::getAlphaDirect(op->mPaint) | |
| != PaintUtils::getAlphaDirect(mOps[0].op->mPaint)) { | |
| return false; | |
| } | |
| if (op->mPaint && mOps[0].op->mPaint && | |
| op->mPaint->getColorFilter() != mOps[0].op->mPaint->getColorFilter()) { | |
| return false; | |
| } | |
| if (op->mPaint && mOps[0].op->mPaint && | |
| op->mPaint->getShader() != mOps[0].op->mPaint->getShader()) { | |
| return false; | |
| } | |
| return true; | |
| } | |
| virtual void add(DrawOp* op, const DeferredDisplayState* state, | |
| bool opaqueOverBounds) override { | |
| DrawBatch::add(op, state, opaqueOverBounds); | |
| const int newClipSideFlags = state->mClipSideFlags; | |
| mClipSideFlags |= newClipSideFlags; | |
| if (newClipSideFlags & kClipSide_Left) mClipRect.left = state->mClip.left; | |
| if (newClipSideFlags & kClipSide_Top) mClipRect.top = state->mClip.top; | |
| if (newClipSideFlags & kClipSide_Right) mClipRect.right = state->mClip.right; | |
| if (newClipSideFlags & kClipSide_Bottom) mClipRect.bottom = state->mClip.bottom; | |
| } | |
| virtual void replay(OpenGLRenderer& renderer, Rect& dirty, int index) override { | |
| DEFER_LOGD("%d replaying MergingDrawBatch %p, with %d ops," | |
| " clip flags %x (batch id %x, merge id %p)", | |
| index, this, mOps.size(), mClipSideFlags, getBatchId(), getMergeId()); | |
| if (mOps.size() == 1) { | |
| DrawBatch::replay(renderer, dirty, -1); | |
| return; | |
| } | |
| // clipping in the merged case is done ahead of time since all ops share the clip (if any) | |
| renderer.setupMergedMultiDraw(mClipSideFlags ? &mClipRect : nullptr); | |
| DrawOp* op = mOps[0].op; | |
| #if DEBUG_DISPLAY_LIST_OPS_AS_EVENTS | |
| renderer.eventMark("multiDraw"); | |
| renderer.eventMark(op->name()); | |
| #endif | |
| op->multiDraw(renderer, dirty, mOps, mBounds); | |
| #if DEBUG_MERGE_BEHAVIOR | |
| renderer.drawScreenSpaceColorRect(mBounds.left, mBounds.top, mBounds.right, mBounds.bottom, | |
| DEBUG_COLOR_MERGEDBATCH); | |
| #endif | |
| } | |
| private: | |
| /* | |
| * Contains the effective clip rect shared by all merged ops. Initialized to the layer viewport, | |
| * it will shrink if an op must be clipped on a certain side. The clipped sides are reflected in | |
| * mClipSideFlags. | |
| */ | |
| Rect mClipRect; | |
| int mClipSideFlags; | |
| }; | |
| class StateOpBatch : public Batch { | |
| public: | |
| // creates a single operation batch | |
| StateOpBatch(const StateOp* op, const DeferredDisplayState* state) : mOp(op), mState(state) {} | |
| virtual void replay(OpenGLRenderer& renderer, Rect& dirty, int index) override { | |
| DEFER_LOGD("replaying state op batch %p", this); | |
| renderer.restoreDisplayState(*mState); | |
| // use invalid save count because it won't be used at flush time - RestoreToCountOp is the | |
| // only one to use it, and we don't use that class at flush time, instead calling | |
| // renderer.restoreToCount directly | |
| int saveCount = -1; | |
| mOp->applyState(renderer, saveCount); | |
| } | |
| private: | |
| const StateOp* mOp; | |
| const DeferredDisplayState* mState; | |
| }; | |
| class RestoreToCountBatch : public Batch { | |
| public: | |
| RestoreToCountBatch(const StateOp* op, const DeferredDisplayState* state, int restoreCount) : | |
| mState(state), mRestoreCount(restoreCount) {} | |
| virtual void replay(OpenGLRenderer& renderer, Rect& dirty, int index) override { | |
| DEFER_LOGD("batch %p restoring to count %d", this, mRestoreCount); | |
| renderer.restoreDisplayState(*mState); | |
| renderer.restoreToCount(mRestoreCount); | |
| } | |
| private: | |
| // we use the state storage for the RestoreToCountOp, but don't replay the op itself | |
| const DeferredDisplayState* mState; | |
| /* | |
| * The count used here represents the flush() time saveCount. This is as opposed to the | |
| * DisplayList record time, or defer() time values (which are RestoreToCountOp's mCount, and | |
| * (saveCount + mCount) respectively). Since the count is different from the original | |
| * RestoreToCountOp, we don't store a pointer to the op, as elsewhere. | |
| */ | |
| const int mRestoreCount; | |
| }; | |
| #if DEBUG_MERGE_BEHAVIOR | |
| class BarrierDebugBatch : public Batch { | |
| virtual void replay(OpenGLRenderer& renderer, Rect& dirty, int index) { | |
| renderer.drawScreenSpaceColorRect(0, 0, 10000, 10000, DEBUG_COLOR_BARRIER); | |
| } | |
| }; | |
| #endif | |
| ///////////////////////////////////////////////////////////////////////////////// | |
| // DeferredDisplayList | |
| ///////////////////////////////////////////////////////////////////////////////// | |
| void DeferredDisplayList::resetBatchingState() { | |
| for (int i = 0; i < kOpBatch_Count; i++) { | |
| mBatchLookup[i] = nullptr; | |
| mMergingBatches[i].clear(); | |
| } | |
| #if DEBUG_MERGE_BEHAVIOR | |
| if (mBatches.size() != 0) { | |
| mBatches.add(new BarrierDebugBatch()); | |
| } | |
| #endif | |
| mEarliestBatchIndex = mBatches.size(); | |
| } | |
| void DeferredDisplayList::clear() { | |
| resetBatchingState(); | |
| mComplexClipStackStart = -1; | |
| for (unsigned int i = 0; i < mBatches.size(); i++) { | |
| delete mBatches[i]; | |
| } | |
| mBatches.clear(); | |
| mSaveStack.clear(); | |
| mEarliestBatchIndex = 0; | |
| mEarliestUnclearedIndex = 0; | |
| } | |
| ///////////////////////////////////////////////////////////////////////////////// | |
| // Operation adding | |
| ///////////////////////////////////////////////////////////////////////////////// | |
| int DeferredDisplayList::getStateOpDeferFlags() const { | |
| // For both clipOp and save(Layer)Op, we don't want to save drawing info, and only want to save | |
| // the clip if we aren't recording a complex clip (and can thus trust it to be a rect) | |
| return recordingComplexClip() ? 0 : kStateDeferFlag_Clip; | |
| } | |
| int DeferredDisplayList::getDrawOpDeferFlags() const { | |
| return kStateDeferFlag_Draw | getStateOpDeferFlags(); | |
| } | |
| /** | |
| * When an clipping operation occurs that could cause a complex clip, record the operation and all | |
| * subsequent clipOps, save/restores (if the clip flag is set). During a flush, instead of loading | |
| * the clip from deferred state, we play back all of the relevant state operations that generated | |
| * the complex clip. | |
| * | |
| * Note that we don't need to record the associated restore operation, since operations at defer | |
| * time record whether they should store the renderer's current clip | |
| */ | |
| void DeferredDisplayList::addClip(OpenGLRenderer& renderer, ClipOp* op) { | |
| if (recordingComplexClip() || op->canCauseComplexClip() || !renderer.hasRectToRectTransform()) { | |
| DEFER_LOGD("%p Received complex clip operation %p", this, op); | |
| // NOTE: defer clip op before setting mComplexClipStackStart so previous clip is recorded | |
| storeStateOpBarrier(renderer, op); | |
| if (!recordingComplexClip()) { | |
| mComplexClipStackStart = renderer.getSaveCount() - 1; | |
| DEFER_LOGD(" Starting complex clip region, start is %d", mComplexClipStackStart); | |
| } | |
| } | |
| } | |
| /** | |
| * For now, we record save layer operations as barriers in the batch list, preventing drawing | |
| * operations from reordering around the saveLayer and it's associated restore() | |
| * | |
| * In the future, we should send saveLayer commands (if they can be played out of order) and their | |
| * contained drawing operations to a seperate list of batches, so that they may draw at the | |
| * beginning of the frame. This would avoid targetting and removing an FBO in the middle of a frame. | |
| * | |
| * saveLayer operations should be pulled to the beginning of the frame if the canvas doesn't have a | |
| * complex clip, and if the flags (SaveFlags::Clip & SaveFlags::ClipToLayer) are set. | |
| */ | |
| void DeferredDisplayList::addSaveLayer(OpenGLRenderer& renderer, | |
| SaveLayerOp* op, int newSaveCount) { | |
| DEFER_LOGD("%p adding saveLayerOp %p, flags %x, new count %d", | |
| this, op, op->getFlags(), newSaveCount); | |
| storeStateOpBarrier(renderer, op); | |
| mSaveStack.push_back(newSaveCount); | |
| } | |
| /** | |
| * Takes save op and it's return value - the new save count - and stores it into the stream as a | |
| * barrier if it's needed to properly modify a complex clip | |
| */ | |
| void DeferredDisplayList::addSave(OpenGLRenderer& renderer, SaveOp* op, int newSaveCount) { | |
| int saveFlags = op->getFlags(); | |
| DEFER_LOGD("%p adding saveOp %p, flags %x, new count %d", this, op, saveFlags, newSaveCount); | |
| if (recordingComplexClip() && (saveFlags & SaveFlags::Clip)) { | |
| // store and replay the save operation, as it may be needed to correctly playback the clip | |
| DEFER_LOGD(" adding save barrier with new save count %d", newSaveCount); | |
| storeStateOpBarrier(renderer, op); | |
| mSaveStack.push_back(newSaveCount); | |
| } | |
| } | |
| /** | |
| * saveLayer() commands must be associated with a restoreToCount batch that will clean up and draw | |
| * the layer in the deferred list | |
| * | |
| * other save() commands which occur as children of a snapshot with complex clip will be deferred, | |
| * and must be restored | |
| * | |
| * Either will act as a barrier to draw operation reordering, as we want to play back layer | |
| * save/restore and complex canvas modifications (including save/restore) in order. | |
| */ | |
| void DeferredDisplayList::addRestoreToCount(OpenGLRenderer& renderer, StateOp* op, | |
| int newSaveCount) { | |
| DEFER_LOGD("%p addRestoreToCount %d", this, newSaveCount); | |
| if (recordingComplexClip() && newSaveCount <= mComplexClipStackStart) { | |
| mComplexClipStackStart = -1; | |
| resetBatchingState(); | |
| } | |
| if (mSaveStack.empty() || newSaveCount > mSaveStack.back()) { | |
| return; | |
| } | |
| while (!mSaveStack.empty() && mSaveStack.back() >= newSaveCount) mSaveStack.pop_back(); | |
| storeRestoreToCountBarrier(renderer, op, mSaveStack.size() + FLUSH_SAVE_STACK_DEPTH); | |
| } | |
| void DeferredDisplayList::addDrawOp(OpenGLRenderer& renderer, DrawOp* op) { | |
| /* 1: op calculates local bounds */ | |
| DeferredDisplayState* const state = createState(); | |
| if (op->getLocalBounds(state->mBounds)) { | |
| if (state->mBounds.isEmpty()) { | |
| // valid empty bounds, don't bother deferring | |
| tryRecycleState(state); | |
| return; | |
| } | |
| } else { | |
| state->mBounds.setEmpty(); | |
| } | |
| /* 2: renderer calculates global bounds + stores state */ | |
| if (renderer.storeDisplayState(*state, getDrawOpDeferFlags())) { | |
| tryRecycleState(state); | |
| return; // quick rejected | |
| } | |
| /* 3: ask op for defer info, given renderer state */ | |
| DeferInfo deferInfo; | |
| op->onDefer(renderer, deferInfo, *state); | |
| // complex clip has a complex set of expectations on the renderer state - for now, avoid taking | |
| // the merge path in those cases | |
| deferInfo.mergeable &= !recordingComplexClip(); | |
| deferInfo.opaqueOverBounds &= !recordingComplexClip() | |
| && mSaveStack.empty() | |
| && !state->mRoundRectClipState; | |
| if (CC_LIKELY(avoidOverdraw()) && mBatches.size() && | |
| state->mClipSideFlags != kClipSide_ConservativeFull && | |
| deferInfo.opaqueOverBounds && state->mBounds.contains(mBounds)) { | |
| // avoid overdraw by resetting drawing state + discarding drawing ops | |
| discardDrawingBatches(mBatches.size() - 1); | |
| resetBatchingState(); | |
| } | |
| if (CC_UNLIKELY(Properties::drawReorderDisabled)) { | |
| // TODO: elegant way to reuse batches? | |
| DrawBatch* b = new DrawBatch(deferInfo); | |
| b->add(op, state, deferInfo.opaqueOverBounds); | |
| mBatches.push_back(b); | |
| return; | |
| } | |
| // find the latest batch of the new op's type, and try to merge the new op into it | |
| DrawBatch* targetBatch = nullptr; | |
| // insertion point of a new batch, will hopefully be immediately after similar batch | |
| // (eventually, should be similar shader) | |
| int insertBatchIndex = mBatches.size(); | |
| if (!mBatches.empty()) { | |
| if (state->mBounds.isEmpty()) { | |
| // don't know the bounds for op, so create new batch and start from scratch on next op | |
| DrawBatch* b = new DrawBatch(deferInfo); | |
| b->add(op, state, deferInfo.opaqueOverBounds); | |
| mBatches.push_back(b); | |
| resetBatchingState(); | |
| #if DEBUG_DEFER | |
| DEFER_LOGD("Warning: Encountered op with empty bounds, resetting batches"); | |
| op->output(2); | |
| #endif | |
| return; | |
| } | |
| if (deferInfo.mergeable) { | |
| // Try to merge with any existing batch with same mergeId. | |
| std::unordered_map<mergeid_t, DrawBatch*>& mergingBatch | |
| = mMergingBatches[deferInfo.batchId]; | |
| auto getResult = mergingBatch.find(deferInfo.mergeId); | |
| if (getResult != mergingBatch.end()) { | |
| targetBatch = getResult->second; | |
| if (!((MergingDrawBatch*) targetBatch)->canMergeWith(op, state)) { | |
| targetBatch = nullptr; | |
| } | |
| } | |
| } else { | |
| // join with similar, non-merging batch | |
| targetBatch = (DrawBatch*)mBatchLookup[deferInfo.batchId]; | |
| } | |
| if (targetBatch || deferInfo.mergeable) { | |
| // iterate back toward target to see if anything drawn since should overlap the new op | |
| // if no target, merging ops still interate to find similar batch to insert after | |
| for (int i = mBatches.size() - 1; i >= mEarliestBatchIndex; i--) { | |
| DrawBatch* overBatch = (DrawBatch*)mBatches[i]; | |
| if (overBatch == targetBatch) break; | |
| // TODO: also consider shader shared between batch types | |
| if (deferInfo.batchId == overBatch->getBatchId()) { | |
| insertBatchIndex = i + 1; | |
| if (!targetBatch) break; // found insert position, quit | |
| } | |
| if (overBatch->intersects(state->mBounds)) { | |
| // NOTE: it may be possible to optimize for special cases where two operations | |
| // of the same batch/paint could swap order, such as with a non-mergeable | |
| // (clipped) and a mergeable text operation | |
| targetBatch = nullptr; | |
| #if DEBUG_DEFER | |
| DEFER_LOGD("op couldn't join batch %p, was intersected by batch %d", | |
| targetBatch, i); | |
| op->output(2); | |
| #endif | |
| break; | |
| } | |
| } | |
| } | |
| } | |
| if (!targetBatch) { | |
| if (deferInfo.mergeable) { | |
| targetBatch = new MergingDrawBatch(deferInfo, | |
| renderer.getViewportWidth(), renderer.getViewportHeight()); | |
| mMergingBatches[deferInfo.batchId].insert( | |
| std::make_pair(deferInfo.mergeId, targetBatch)); | |
| } else { | |
| targetBatch = new DrawBatch(deferInfo); | |
| mBatchLookup[deferInfo.batchId] = targetBatch; | |
| } | |
| DEFER_LOGD("creating %singBatch %p, bid %x, at %d", | |
| deferInfo.mergeable ? "Merg" : "Draw", | |
| targetBatch, deferInfo.batchId, insertBatchIndex); | |
| mBatches.insert(mBatches.begin() + insertBatchIndex, targetBatch); | |
| } | |
| targetBatch->add(op, state, deferInfo.opaqueOverBounds); | |
| } | |
| void DeferredDisplayList::storeStateOpBarrier(OpenGLRenderer& renderer, StateOp* op) { | |
| DEFER_LOGD("%p adding state op barrier at pos %d", this, mBatches.size()); | |
| DeferredDisplayState* state = createState(); | |
| renderer.storeDisplayState(*state, getStateOpDeferFlags()); | |
| mBatches.push_back(new StateOpBatch(op, state)); | |
| resetBatchingState(); | |
| } | |
| void DeferredDisplayList::storeRestoreToCountBarrier(OpenGLRenderer& renderer, StateOp* op, | |
| int newSaveCount) { | |
| DEFER_LOGD("%p adding restore to count %d barrier, pos %d", | |
| this, newSaveCount, mBatches.size()); | |
| // store displayState for the restore operation, as it may be associated with a saveLayer that | |
| // doesn't have SaveFlags::Clip set | |
| DeferredDisplayState* state = createState(); | |
| renderer.storeDisplayState(*state, getStateOpDeferFlags()); | |
| mBatches.push_back(new RestoreToCountBatch(op, state, newSaveCount)); | |
| resetBatchingState(); | |
| } | |
| ///////////////////////////////////////////////////////////////////////////////// | |
| // Replay / flush | |
| ///////////////////////////////////////////////////////////////////////////////// | |
| static void replayBatchList(const std::vector<Batch*>& batchList, | |
| OpenGLRenderer& renderer, Rect& dirty) { | |
| for (unsigned int i = 0; i < batchList.size(); i++) { | |
| if (batchList[i]) { | |
| batchList[i]->replay(renderer, dirty, i); | |
| } | |
| } | |
| DEFER_LOGD("--flushed, drew %d batches", batchList.size()); | |
| } | |
| void DeferredDisplayList::flush(OpenGLRenderer& renderer, Rect& dirty) { | |
| ATRACE_NAME("flush drawing commands"); | |
| Caches::getInstance().fontRenderer.endPrecaching(); | |
| if (isEmpty()) return; // nothing to flush | |
| renderer.restoreToCount(1); | |
| DEFER_LOGD("--flushing"); | |
| renderer.eventMark("Flush"); | |
| // save and restore so that reordering doesn't affect final state | |
| renderer.save(SaveFlags::MatrixClip); | |
| if (CC_LIKELY(avoidOverdraw())) { | |
| for (unsigned int i = 1; i < mBatches.size(); i++) { | |
| if (mBatches[i] && mBatches[i]->coversBounds(mBounds)) { | |
| discardDrawingBatches(i - 1); | |
| } | |
| } | |
| } | |
| // NOTE: depth of the save stack at this point, before playback, should be reflected in | |
| // FLUSH_SAVE_STACK_DEPTH, so that save/restores match up correctly | |
| replayBatchList(mBatches, renderer, dirty); | |
| renderer.restoreToCount(1); | |
| DEFER_LOGD("--flush complete, returning %x", status); | |
| clear(); | |
| } | |
| void DeferredDisplayList::discardDrawingBatches(const unsigned int maxIndex) { | |
| for (unsigned int i = mEarliestUnclearedIndex; i <= maxIndex; i++) { | |
| // leave deferred state ops alone for simplicity (empty save restore pairs may now exist) | |
| if (mBatches[i] && mBatches[i]->purelyDrawBatch()) { | |
| delete mBatches[i]; | |
| mBatches[i] = nullptr; | |
| } | |
| } | |
| mEarliestUnclearedIndex = maxIndex + 1; | |
| } | |
| }; // namespace uirenderer | |
| }; // namespace android |