| <?xml version="1.0" encoding="utf-8"?> |
| <!-- |
| /* |
| ** Copyright 2009, The Android Open Source Project |
| ** |
| ** Licensed under the Apache License, Version 2.0 (the "License"); |
| ** you may not use this file except in compliance with the License. |
| ** You may obtain a copy of the License at |
| ** |
| ** http://www.apache.org/licenses/LICENSE-2.0 |
| ** |
| ** Unless required by applicable law or agreed to in writing, software |
| ** distributed under the License is distributed on an "AS IS" BASIS, |
| ** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| ** See the License for the specific language governing permissions and |
| ** limitations under the License. |
| */ |
| --> |
| |
| <!-- These resources are around just to allow their values to be customized |
| for different hardware and product builds. Do not translate. --> |
| <resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2"> |
| <!-- Do not translate. Defines the slots for the right-hand side icons. That is to say, the |
| icons in the status bar that are not notifications. --> |
| <string-array name="config_statusBarIcons"> |
| <item><xliff:g id="id">ime</xliff:g></item> |
| <item><xliff:g id="id">sync_failing</xliff:g></item> |
| <item><xliff:g id="id">sync_active</xliff:g></item> |
| <item><xliff:g id="id">location</xliff:g></item> |
| <item><xliff:g id="id">bluetooth</xliff:g></item> |
| <item><xliff:g id="id">nfc</xliff:g></item> |
| <item><xliff:g id="id">tty</xliff:g></item> |
| <item><xliff:g id="id">speakerphone</xliff:g></item> |
| <item><xliff:g id="id">mute</xliff:g></item> |
| <item><xliff:g id="id">volume</xliff:g></item> |
| <item><xliff:g id="id">wifi</xliff:g></item> |
| <item><xliff:g id="id">cdma_eri</xliff:g></item> |
| <item><xliff:g id="id">data_connection</xliff:g></item> |
| <item><xliff:g id="id">phone_evdo_signal</xliff:g></item> |
| <item><xliff:g id="id">phone_signal</xliff:g></item> |
| <item><xliff:g id="id">battery</xliff:g></item> |
| <item><xliff:g id="id">alarm_clock</xliff:g></item> |
| <item><xliff:g id="id">secure</xliff:g></item> |
| <item><xliff:g id="id">clock</xliff:g></item> |
| </string-array> |
| |
| <!-- Flag indicating whether the surface flinger has limited |
| alpha compositing functionality in hardware. If set, the window |
| manager will disable alpha trasformation in animations where not |
| strictly needed. --> |
| <bool name="config_sf_limitedAlpha">false</bool> |
| |
| <!-- Default value used to block data calls if ims is not |
| connected. If you use the ims apn DCT will block |
| any other apn from connecting until ims apn is connected--> |
| <bool name="ImsConnectedDefaultValue">false</bool> |
| |
| <!-- Flag indicating whether the surface flinger is inefficient |
| at performing a blur. Used by parts of the UI to turn off |
| the blur effect where it isn't worth the performance hit. |
| As of Honeycomb, blurring is not supported anymore. --> |
| <bool name="config_sf_slowBlur">true</bool> |
| |
| <!-- Flag indicating that the media framework should allow changing |
| master volume stream and nothing else . --> |
| <bool name="config_useMasterVolume">false</bool> |
| |
| <!-- Flag indicating that the media framework should support playing of sounds on volume |
| key usage. This adds noticeable additional overhead to volume key processing, so |
| is disableable for products for which it is irrelevant. --> |
| <bool name="config_useVolumeKeySounds">true</bool> |
| |
| <!-- Array of integer pairs controlling the rate at which the master volume changes |
| in response to volume up and down key events. |
| The first integer of each pair is compared against the current master volume |
| (in range 0 to 100). |
| The last pair with first integer <= the current volume is chosen, |
| and the second integer of the pair indicates the amount to increase the master volume |
| when volume up is pressed. --> |
| <integer-array name="config_masterVolumeRamp"> |
| <item>0</item> <item>5</item> <!-- default: always increase volume by 5% --> |
| </integer-array> |
| |
| <!-- The attenuation in dB applied to the sound effects played |
| through AudioManager.playSoundEffect() when no volume is specified. --> |
| <integer name="config_soundEffectVolumeDb">-6</integer> |
| |
| <!-- The attenuation in dB applied to the lock/unlock sounds. --> |
| <integer name="config_lockSoundVolumeDb">-6</integer> |
| |
| <!-- Flag indicating whether the AUDIO_BECOMING_NOISY notification should |
| be sent during a change to the audio output device. --> |
| <bool name="config_sendAudioBecomingNoisy">true</bool> |
| |
| <!-- The duration (in milliseconds) of a short animation. --> |
| <integer name="config_shortAnimTime">200</integer> |
| |
| <!-- The duration (in milliseconds) of a medium-length animation. --> |
| <integer name="config_mediumAnimTime">400</integer> |
| |
| <!-- The duration (in milliseconds) of a long animation. --> |
| <integer name="config_longAnimTime">500</integer> |
| |
| <!-- The duration (in milliseconds) of the activity open/close and fragment open/close animations. --> |
| <integer name="config_activityShortDur">150</integer> |
| <integer name="config_activityDefaultDur">220</integer> |
| |
| <!-- Duration for the dim animation behind a dialog. This may be either |
| a percentage, which is relative to the duration of the enter/open |
| animation of the window being shown that is dimming behind, or it may |
| be an integer for a constant duration. --> |
| <fraction name="config_dimBehindFadeDuration">100%</fraction> |
| |
| <!-- The maximum width we would prefer dialogs to be. 0 if there is no |
| maximum (let them grow as large as the screen). Actual values are |
| specified for -large and -xlarge configurations. --> |
| <dimen name="config_prefDialogWidth">320dp</dimen> |
| |
| <!-- Enables or disables fading edges when marquee is enabled in TextView. --> |
| <bool name="config_ui_enableFadingMarquee">true</bool> |
| |
| <!-- Whether dialogs should close automatically when the user touches outside |
| of them. This should not normally be modified. --> |
| <bool name="config_closeDialogWhenTouchOutside">true</bool> |
| |
| <!-- Device configuration indicating whether we should avoid using accelerated graphics |
| in certain places to reduce RAM footprint. This is ignored if ro.config.low_ram |
| is true (in that case this is assumed true as well). It can allow you to tune down |
| your device's memory use without going to the point of causing applications to turn |
| off features. --> |
| <bool name="config_avoidGfxAccel">false</bool> |
| |
| <!-- Device configuration setting the minfree tunable in the lowmemorykiller in the kernel. |
| A high value will cause the lowmemorykiller to fire earlier, keeping more memory |
| in the file cache and preventing I/O thrashing, but allowing fewer processes to |
| stay in memory. A low value will keep more processes in memory but may cause |
| thrashing if set too low. Overrides the default value chosen by ActivityManager |
| based on screen size and total memory for the largest lowmemorykiller bucket, and |
| scaled proportionally to the smaller buckets. -1 keeps the default. --> |
| <integer name="config_lowMemoryKillerMinFreeKbytesAbsolute">-1</integer> |
| |
| <!-- Device configuration adjusting the minfree tunable in the lowmemorykiller in the |
| kernel. A high value will cause the lowmemorykiller to fire earlier, keeping more |
| memory in the file cache and preventing I/O thrashing, but allowing fewer processes |
| to stay in memory. A low value will keep more processes in memory but may cause |
| thrashing if set too low. Directly added to the default value chosen by |
| ActivityManager based on screen size and total memory for the largest lowmemorykiller |
| bucket, and scaled proportionally to the smaller buckets. 0 keeps the default. --> |
| <integer name="config_lowMemoryKillerMinFreeKbytesAdjust">0</integer> |
| |
| <!-- Device configuration setting the /proc/sys/vm/extra_free_kbytes tunable in the kernel |
| (if it exists). A high value will increase the amount of memory that the kernel |
| tries to keep free, reducing allocation time and causing the lowmemorykiller to kill |
| earlier. A low value allows more memory to be used by processes but may cause more |
| allocations to block waiting on disk I/O or lowmemorykiller. Overrides the default |
| value chosen by ActivityManager based on screen size. 0 prevents keeping any extra |
| memory over what the kernel keeps by default. -1 keeps the default. --> |
| <integer name="config_extraFreeKbytesAbsolute">-1</integer> |
| |
| <!-- Device configuration adjusting the /proc/sys/vm/extra_free_kbytes tunable in the kernel |
| (if it exists). 0 uses the default value chosen by ActivityManager. A positive value |
| will increase the amount of memory that the kernel tries to keep free, reducing |
| allocation time and causing the lowmemorykiller to kill earlier. A negative value |
| allows more memory to be used by processes but may cause more allocations to block |
| waiting on disk I/O or lowmemorykiller. Directly added to the default value chosen by |
| ActivityManager based on screen size. --> |
| <integer name="config_extraFreeKbytesAdjust">0</integer> |
| |
| <!-- The duration (in milliseconds) that the radio will scan for a signal |
| when there's no network connection. If the scan doesn't timeout, use zero --> |
| <integer name="config_radioScanningTimeout">0</integer> |
| |
| <!-- XXXXX NOTE THE FOLLOWING RESOURCES USE THE WRONG NAMING CONVENTION. |
| Please don't copy them, copy anything else. --> |
| |
| <!-- This string array should be overridden by the device to present a list of network |
| attributes. This is used by the connectivity manager to decide which networks can coexist |
| based on the hardware --> |
| <!-- An Array of "[Connection name],[ConnectivityManager.TYPE_xxxx], |
| [associated radio-type],[priority],[restoral-timer(ms)],[dependencyMet] --> |
| <!-- the 5th element "resore-time" indicates the number of milliseconds to delay |
| before automatically restore the default connection. Set -1 if the connection |
| does not require auto-restore. --> |
| <!-- the 6th element indicates boot-time dependency-met value. --> |
| <string-array translatable="false" name="networkAttributes"> |
| <item>"wifi,1,1,1,-1,true"</item> |
| <item>"mobile,0,0,0,-1,true"</item> |
| <item>"mobile_mms,2,0,2,60000,true"</item> |
| <item>"mobile_supl,3,0,2,60000,true"</item> |
| <item>"mobile_hipri,5,0,3,60000,true"</item> |
| <item>"mobile_fota,10,0,2,60000,true"</item> |
| <item>"mobile_ims,11,0,2,60000,true"</item> |
| <item>"mobile_cbs,12,0,2,60000,true"</item> |
| <item>"wifi_p2p,13,1,0,-1,true"</item> |
| <item>"mobile_ia,14,0,2,-1,true"</item> |
| </string-array> |
| |
| <!-- Array of ConnectivityManager.TYPE_xxxx constants for networks that may only |
| be controlled by systemOrSignature apps. --> |
| <integer-array translatable="false" name="config_protectedNetworks"> |
| <item>10</item> |
| <item>11</item> |
| <item>12</item> |
| <item>14</item> |
| </integer-array> |
| |
| <!-- This string array should be overridden by the device to present a list of radio |
| attributes. This is used by the connectivity manager to decide which networks can coexist |
| based on the hardware --> |
| <!-- An Array of "[ConnectivityManager connectionType], |
| [# simultaneous connection types]" --> |
| <string-array translatable="false" name="radioAttributes"> |
| <item>"1,1"</item> |
| <item>"0,1"</item> |
| </string-array> |
| |
| <!-- Set of NetworkInfo.getType() that reflect data usage. --> |
| <integer-array translatable="false" name="config_data_usage_network_types"> |
| <item>0</item> <!-- TYPE_MOBILE --> |
| <item>2</item> <!-- TYPE_MOBILE_MMS --> |
| <item>3</item> <!-- TYPE_MOBILE_SUPL --> |
| <item>4</item> <!-- TYPE_MOBILE_DUN --> |
| <item>5</item> <!-- TYPE_MOBILE_HIPRI --> |
| <item>10</item> <!-- TYPE_MOBILE_FOTA --> |
| <item>11</item> <!-- TYPE_MOBILE_IMS --> |
| <item>12</item> <!-- TYPE_MOBILE_CBS --> |
| <item>14</item> <!-- TYPE_MOBILE_IA --> |
| </integer-array> |
| |
| <!-- The maximum duration (in milliseconds) we expect a network transition to take --> |
| <integer name="config_networkTransitionTimeout">60000</integer> |
| |
| <!-- List of regexpressions describing the interface (if any) that represent tetherable |
| USB interfaces. If the device doesn't want to support tething over USB this should |
| be empty. An example would be "usb.*" --> |
| <string-array translatable="false" name="config_tether_usb_regexs"> |
| </string-array> |
| |
| <!-- List of regexpressions describing the interface (if any) that represent tetherable |
| Wifi interfaces. If the device doesn't want to support tethering over Wifi this |
| should be empty. An example would be "softap.*" --> |
| <string-array translatable="false" name="config_tether_wifi_regexs"> |
| </string-array> |
| |
| <!-- List of regexpressions describing the interface (if any) that represent tetherable |
| WiMAX interfaces. If the device doesn't want to support tethering over Wifi this |
| should be empty. An example would be "softap.*" --> |
| <string-array translatable="false" name="config_tether_wimax_regexs"> |
| </string-array> |
| |
| <!-- List of regexpressions describing the interface (if any) that represent tetherable |
| bluetooth interfaces. If the device doesn't want to support tethering over bluetooth this |
| should be empty. --> |
| <string-array translatable="false" name="config_tether_bluetooth_regexs"> |
| </string-array> |
| |
| <!-- Max number of Bluetooth tethering connections allowed. If this is |
| updated config_tether_dhcp_range has to be updated appropriately. --> |
| <integer translateable="false" name="config_max_pan_devices">5</integer> |
| |
| <!-- Dhcp range (min, max) to use for tethering purposes --> |
| <string-array translatable="false" name="config_tether_dhcp_range"> |
| </string-array> |
| |
| <!-- Regex of wired ethernet ifaces --> |
| <string translatable="false" name="config_ethernet_iface_regex">eth\\d</string> |
| |
| <!-- If the mobile hotspot feature requires provisioning, a package name and class name |
| can be provided to launch a supported application that provisions the devices. |
| |
| Example Usage: |
| |
| String[] appDetails = getStringArray(R.array.config_mobile_hotspot_provision_app); |
| Intent intent = new Intent(Intent.ACTION_MAIN); |
| intent.setClassName(appDetails[0], appDetails[1]); |
| startActivityForResult(intent, 0); |
| |
| public void onActivityResult(int requestCode, int resultCode, Intent intent) { |
| super.onActivityResult(requestCode, resultCode, intent); |
| if (requestCode == 0) { |
| if (resultCode == Activity.RESULT_OK) { |
| //Mobile hotspot provisioning successful |
| } else { |
| //Mobile hotspot provisioning failed |
| } |
| } |
| |
| See src/com/android/settings/TetherSettings.java for more details. |
| --> |
| <!-- The first element is the package name and the second element is the class name |
| of the provisioning app --> |
| <string-array translatable="false" name="config_mobile_hotspot_provision_app"> |
| <!-- |
| <item>com.example.provisioning</item> |
| <item>com.example.provisioning.Activity</item> |
| --> |
| </string-array> |
| |
| <!-- Array of ConnectivityManager.TYPE_xxxx values allowable for tethering --> |
| <!-- Common options are [1, 4] for TYPE_WIFI and TYPE_MOBILE_DUN or |
| <!== [0,1,5,7] for TYPE_MOBILE, TYPE_WIFI, TYPE_MOBILE_HIPRI and TYPE_BLUETOOTH --> |
| <integer-array translatable="false" name="config_tether_upstream_types"> |
| <item>0</item> |
| <item>1</item> |
| <item>5</item> |
| <item>7</item> |
| <item>9</item> |
| </integer-array> |
| |
| <!-- If the DUN connection for this CDMA device supports more than just DUN --> |
| <!-- traffic you should list them here. --> |
| <!-- If this device is not CDMA this is ignored. If this list is empty on --> |
| <!-- a DUN-requiring CDMA device, the DUN APN will just support just DUN. --> |
| <string-array translatable="false" name="config_cdma_dun_supported_types"> |
| </string-array> |
| |
| <!-- String containing the apn value for tethering. May be overriden by secure settings |
| TETHER_DUN_APN. Value is a comma separated series of strings: |
| "name,apn,proxy,port,username,password,server,mmsc,mmsproxy,mmsport,mcc,mnc,auth,type" |
| note that empty fields can be ommitted: "name,apn,,,,,,,,,310,260,,DUN" --> |
| <string translatable="false" name="config_tether_apndata"></string> |
| |
| <!-- Boolean indicating whether the wifi chipset has dual frequency band support --> |
| <bool translatable="false" name="config_wifi_dual_band_support">false</bool> |
| |
| <!-- Device type information conforming to Annex B format in WiFi Direct specification. |
| The default represents a dual-mode smartphone --> |
| <string translatable="false" name="config_wifi_p2p_device_type">10-0050F204-5</string> |
| |
| <!-- Boolean indicating whether the wifi chipset supports background scanning mechanism. |
| This mechanism allows the host to remain in suspend state and the dongle to actively |
| scan and wake the host when a configured SSID is detected by the dongle. This chipset |
| capability can provide power savings when wifi needs to be always kept on. --> |
| <bool translatable="false" name="config_wifi_background_scan_support">false</bool> |
| |
| <!-- Integer indicating wpa_supplicant scan interval in milliseconds --> |
| <integer translatable="false" name="config_wifi_supplicant_scan_interval">15000</integer> |
| |
| <!-- Integer indicating wpa_supplicant scan interval when p2p is connected in milliseconds --> |
| <integer translatable="false" name="config_wifi_scan_interval_p2p_connected">60000</integer> |
| |
| <!-- Integer indicating the framework scan interval in milliseconds. This is used in the scenario |
| where the chipset does not support background scanning (config_wifi_background_scan_suport |
| is false) to set up a periodic wake up scan so that the device can connect to a new access |
| point on the move. A value of 0 means no periodic scans will be used in the framework. --> |
| <integer translatable="false" name="config_wifi_framework_scan_interval">300000</integer> |
| |
| <!-- Wifi driver stop delay, in milliseconds. |
| Default value is 2 minutes. --> |
| <integer translatable="false" name="config_wifi_driver_stop_delay">120000</integer> |
| |
| <!-- Wifi driver supports batched scan --> |
| <bool translatable="false" name="config_wifi_batched_scan_supported">false</bool> |
| |
| <!-- Flag indicating whether the we should enable the automatic brightness in Settings. |
| Software implementation will be used if config_hardware_auto_brightness_available is not set --> |
| <bool name="config_automatic_brightness_available">false</bool> |
| |
| <!-- Don't name config resources like this. It should look like config_annoyDianne --> |
| <bool name="config_annoy_dianne">true</bool> |
| |
| <!-- XXXXXX END OF RESOURCES USING WRONG NAMING CONVENTION --> |
| |
| <!-- If this is true, the screen will come on when you unplug usb/power/whatever. --> |
| <bool name="config_unplugTurnsOnScreen">false</bool> |
| |
| <!-- If this is true, the screen will fade off. --> |
| <bool name="config_animateScreenLights">true</bool> |
| |
| <!-- If this is true, key chords can be used to take a screenshot on the device. --> |
| <bool name="config_enableScreenshotChord">true</bool> |
| |
| <!-- If true, the screen can be rotated via the accelerometer in all 4 |
| rotations as the default behavior. --> |
| <bool name="config_allowAllRotations">false</bool> |
| |
| <!-- If true, the direction rotation is applied to get to an application's requested |
| orientation is reversed. Normally, the model is that landscape is |
| clockwise from portrait; thus on a portrait device an app requesting |
| landscape will cause a clockwise rotation, and on a landscape device an |
| app requesting portrait will cause a counter-clockwise rotation. Setting |
| true here reverses that logic. --> |
| <bool name="config_reverseDefaultRotation">false</bool> |
| |
| <!-- The number of degrees to rotate the display when the keyboard is open. |
| A value of -1 means no change in orientation by default. --> |
| <integer name="config_lidOpenRotation">-1</integer> |
| |
| <!-- The number of degrees to rotate the display when the device is in a desk dock. |
| A value of -1 means no change in orientation by default. --> |
| <integer name="config_deskDockRotation">-1</integer> |
| |
| <!-- The number of degrees to rotate the display when the device is in a car dock. |
| A value of -1 means no change in orientation by default. --> |
| <integer name="config_carDockRotation">-1</integer> |
| |
| <!-- The number of degrees to rotate the display when the device has HDMI connected |
| but is not in a dock. A value of -1 means no change in orientation by default. |
| Use -1 except on older devices whose Hardware Composer HAL does not |
| provide full support for multiple displays. --> |
| <integer name="config_undockedHdmiRotation">-1</integer> |
| |
| <!-- Control the default UI mode type to use when there is no other type override |
| happening. One of the following values (See Configuration.java): |
| 1 UI_MODE_TYPE_NORMAL |
| 4 UI_MODE_TYPE_TELEVISION |
| 5 UI_MODE_TYPE_APPLIANCE |
| Any other values will have surprising consequences. --> |
| <integer name="config_defaultUiModeType">1</integer> |
| |
| <!-- Control whether being in the desk dock (and powered) always |
| keeps the screen on. By default it stays on when plugged in to |
| AC. 0 will not keep it on; or together 1 to stay on when plugged |
| in to AC and 2 to stay on when plugged in to USB. (So 3 for both.) --> |
| <integer name="config_deskDockKeepsScreenOn">1</integer> |
| |
| <!-- Control whether being in the car dock (and powered) always |
| keeps the screen on. By default it stays on when plugged in to |
| AC. 0 will not keep it on; or together 1 to stay on when plugged |
| in to AC and 2 to stay on when plugged in to USB. (So 3 for both.) --> |
| <integer name="config_carDockKeepsScreenOn">1</integer> |
| |
| <!-- Control whether being in the desk dock should enable accelerometer |
| based screen orientation. This defaults to true because it is |
| common for desk docks to be sold in a variety of form factors |
| with different orientations. Since we cannot always tell these docks |
| apart and the docks cannot report their true orientation on their own, |
| we rely on gravity to determine the effective orientation. --> |
| <bool name="config_deskDockEnablesAccelerometer">true</bool> |
| |
| <!-- Control whether being in the car dock should enable accelerometer based |
| screen orientation. This defaults to true because putting a device in |
| a car dock make the accelerometer more a physical input (like a lid). --> |
| <bool name="config_carDockEnablesAccelerometer">true</bool> |
| |
| <!-- Indicate whether the lid state impacts the accessibility of |
| the physical keyboard. 0 means it doesn't, 1 means it is accessible |
| when the lid is open, 2 means it is accessible when the lid is |
| closed. The default is 0. --> |
| <integer name="config_lidKeyboardAccessibility">0</integer> |
| |
| <!-- Indicate whether the lid state impacts the accessibility of |
| the navigation buttons. 0 means it doesn't, 1 means it is accessible |
| when the lid is open, 2 means it is accessible when the lid is |
| closed. The default is 0. --> |
| <integer name="config_lidNavigationAccessibility">0</integer> |
| |
| <!-- Indicate whether closing the lid causes the device to go to sleep and opening |
| it causes the device to wake up. |
| The default is false. --> |
| <bool name="config_lidControlsSleep">false</bool> |
| |
| <!-- Indicate whether to allow the device to suspend when the screen is off |
| due to the proximity sensor. This resource should only be set to true |
| if the sensor HAL correctly handles the proximity sensor as a wake-up source. |
| Otherwise, the device may fail to wake out of suspend reliably. |
| The default is false. --> |
| <bool name="config_suspendWhenScreenOffDueToProximity">false</bool> |
| |
| <!-- Control the behavior when the user long presses the power button. |
| 0 - Nothing |
| 1 - Global actions menu |
| 2 - Power off (with confirmation) |
| --> |
| <integer name="config_longPressOnPowerBehavior">1</integer> |
| |
| <!-- Package name for default keyguard appwidget [DO NOT TRANSLATE] --> |
| <string name="widget_default_package_name"></string> |
| |
| <!-- Class name for default keyguard appwidget [DO NOT TRANSLATE] --> |
| <string name="widget_default_class_name"></string> |
| |
| <!-- Indicate whether the SD card is accessible without removing the battery. --> |
| <bool name="config_batterySdCardAccessibility">false</bool> |
| |
| <!-- List of file paths for USB host busses to exclude from USB host support. |
| For example, if the first USB bus on the device is used to communicate |
| with the modem or some other restricted hardware, add "/dev/bus/usb/001/" |
| to this list. If this is empty, no parts of the host USB bus will be excluded. |
| --> |
| <string-array name="config_usbHostBlacklist" translatable="false"> |
| </string-array> |
| |
| <!-- List of paths to serial ports that are available to the serial manager. |
| for example, /dev/ttyUSB0 |
| --> |
| <string-array translatable="false" name="config_serialPorts"> |
| </string-array> |
| |
| <!-- Vibrator pattern for feedback about a long screen/key press --> |
| <integer-array name="config_longPressVibePattern"> |
| <item>0</item> |
| <item>1</item> |
| <item>20</item> |
| <item>21</item> |
| </integer-array> |
| |
| <!-- Vibrator pattern for feedback about touching a virtual key --> |
| <integer-array name="config_virtualKeyVibePattern"> |
| <item>0</item> |
| <item>10</item> |
| <item>20</item> |
| <item>30</item> |
| </integer-array> |
| |
| <!-- Vibrator pattern for a very short but reliable vibration for soft keyboard tap --> |
| <integer-array name="config_keyboardTapVibePattern"> |
| <item>40</item> |
| </integer-array> |
| |
| <!-- Vibrator pattern for feedback about booting with safe mode disabled --> |
| <integer-array name="config_safeModeDisabledVibePattern"> |
| <item>0</item> |
| <item>1</item> |
| <item>20</item> |
| <item>21</item> |
| </integer-array> |
| |
| <!-- Vibrator pattern for feedback about booting with safe mode disabled --> |
| <integer-array name="config_safeModeEnabledVibePattern"> |
| <item>0</item> |
| <item>1</item> |
| <item>20</item> |
| <item>21</item> |
| <item>500</item> |
| <item>600</item> |
| </integer-array> |
| |
| <!-- Vibrator pattern for feedback about hitting a scroll barrier --> |
| <integer-array name="config_scrollBarrierVibePattern"> |
| <item>0</item> |
| <item>15</item> |
| <item>10</item> |
| <item>10</item> |
| </integer-array> |
| |
| <bool name="config_use_strict_phone_number_comparation">false</bool> |
| |
| <!-- Display low battery warning when battery level dips to this value. |
| Also, the battery stats are flushed to disk when we hit this level. --> |
| <integer name="config_criticalBatteryWarningLevel">4</integer> |
| |
| <!-- Shutdown if the battery temperature exceeds (this value * 0.1) Celsius. --> |
| <integer name="config_shutdownBatteryTemperature">680</integer> |
| |
| <!-- Display low battery warning when battery level dips to this value --> |
| <integer name="config_lowBatteryWarningLevel">15</integer> |
| |
| <!-- Close low battery warning when battery level reaches this value --> |
| <integer name="config_lowBatteryCloseWarningLevel">20</integer> |
| |
| <!-- Default color for notification LED. --> |
| <color name="config_defaultNotificationColor">#ffffffff</color> |
| |
| <!-- Default LED on time for notification LED in milliseconds. --> |
| <integer name="config_defaultNotificationLedOn">500</integer> |
| |
| <!-- Default LED off time for notification LED in milliseconds. --> |
| <integer name="config_defaultNotificationLedOff">2000</integer> |
| |
| <!-- Default value for led color when battery is low on charge --> |
| <integer name="config_notificationsBatteryLowARGB">0xFFFF0000</integer> |
| |
| <!-- Default value for led color when battery is medium charged --> |
| <integer name="config_notificationsBatteryMediumARGB">0xFFFFFF00</integer> |
| |
| <!-- Default value for led color when battery is fully charged --> |
| <integer name="config_notificationsBatteryFullARGB">0xFF00FF00</integer> |
| |
| <!-- Default value for LED on time when the battery is low on charge in miliseconds --> |
| <integer name="config_notificationsBatteryLedOn">125</integer> |
| |
| <!-- Is the notification LED intrusive? Used to decide if there should be a disable option --> |
| <bool name="config_intrusiveNotificationLed">false</bool> |
| |
| <!-- Default value for LED off time when the battery is low on charge in miliseconds --> |
| <integer name="config_notificationsBatteryLedOff">2875</integer> |
| |
| <!-- Allow the menu hard key to be disabled in LockScreen on some devices --> |
| <bool name="config_disableMenuKeyInLockScreen">false</bool> |
| |
| <!-- Don't show lock screen before unlock screen (PIN/pattern/password) --> |
| <bool name="config_enableLockBeforeUnlockScreen">false</bool> |
| |
| <!-- Disable lockscreen rotation by default --> |
| <bool name="config_enableLockScreenRotation">false</bool> |
| |
| <!-- Disable lockscreen translucent decor by default --> |
| <bool name="config_enableLockScreenTranslucentDecor">false</bool> |
| |
| <!-- Enable translucent decor by default --> |
| <bool name="config_enableTranslucentDecor">true</bool> |
| |
| <!-- Enable puk unlockscreen by default. |
| If unlock screen is disabled, the puk should be unlocked through Emergency Dialer --> |
| <bool name="config_enable_puk_unlock_screen">true</bool> |
| |
| <!-- Enable emergency call when sim is locked or puk locked. Some countries/carriers do not |
| allow emergency calls to be placed without the IMSI, which is locked in the SIM. |
| If so, this should be set to 'false' in an overlay. --> |
| <bool name="config_enable_emergency_call_while_sim_locked">true</bool> |
| |
| <!-- Control the behavior when the user long presses the home button. |
| 0 - Nothing |
| 1 - Recent apps view in SystemUI |
| 2 - Launch assist intent |
| This needs to match the constants in |
| policy/src/com/android/internal/policy/impl/PhoneWindowManager.java |
| --> |
| <integer name="config_longPressOnHomeBehavior">1</integer> |
| |
| <!-- Control the behavior when the user double-taps the home button. |
| 0 - Nothing |
| 1 - Recent apps view in SystemUI |
| This needs to match the constants in |
| policy/src/com/android/internal/policy/impl/PhoneWindowManager.java |
| --> |
| <integer name="config_doubleTapOnHomeBehavior">0</integer> |
| |
| <!-- Array of light sensor LUX values to define our levels for auto backlight brightness support. |
| The N entries of this array define N + 1 control points as follows: |
| (1-based arrays) |
| |
| Point 1: (0, value[1]): lux <= 0 |
| Point 2: (level[1], value[2]): 0 < lux <= level[1] |
| Point 3: (level[2], value[3]): level[2] < lux <= level[3] |
| ... |
| Point N+1: (level[N], value[N+1]): level[N] < lux |
| |
| The control points must be strictly increasing. Each control point |
| corresponds to an entry in the brightness backlight values arrays. |
| For example, if LUX == level[1] (first element of the levels array) |
| then the brightness will be determined by value[2] (second element |
| of the brightness values array). |
| |
| Spline interpolation is used to determine the auto-brightness |
| backlight values for LUX levels between these control points. |
| |
| Must be overridden in platform specific overlays --> |
| <integer-array name="config_autoBrightnessLevels"> |
| </integer-array> |
| |
| <!-- Minimum screen brightness setting allowed by the power manager. |
| The user is forbidden from setting the brightness below this level. --> |
| <integer name="config_screenBrightnessSettingMinimum">10</integer> |
| |
| <!-- Maximum screen brightness allowed by the power manager. |
| The user is forbidden from setting the brightness above this level. --> |
| <integer name="config_screenBrightnessSettingMaximum">255</integer> |
| |
| <!-- Default screen brightness setting. |
| Must be in the range specified by minimum and maximum. --> |
| <integer name="config_screenBrightnessSettingDefault">102</integer> |
| |
| <!-- Screen brightness used to dim the screen when the user activity |
| timeout expires. May be less than the minimum allowed brightness setting |
| that can be set by the user. --> |
| <integer name="config_screenBrightnessDim">10</integer> |
| |
| <!-- Array of output values for LCD backlight corresponding to the LUX values |
| in the config_autoBrightnessLevels array. This array should have size one greater |
| than the size of the config_autoBrightnessLevels array. |
| The brightness values must be between 0 and 255 and be non-decreasing. |
| This must be overridden in platform specific overlays --> |
| <integer-array name="config_autoBrightnessLcdBacklightValues"> |
| </integer-array> |
| |
| <!-- Array of output values for button backlight corresponding to the LUX values |
| in the config_autoBrightnessLevels array. This array should have size one greater |
| than the size of the config_autoBrightnessLevels array. |
| The brightness values must be between 0 and 255 and be non-decreasing. |
| This must be overridden in platform specific overlays --> |
| <integer-array name="config_autoBrightnessButtonBacklightValues"> |
| </integer-array> |
| |
| <!-- Array of output values for keyboard backlight corresponding to the LUX values |
| in the config_autoBrightnessLevels array. This array should have size one greater |
| than the size of the config_autoBrightnessLevels array. |
| The brightness values must be between 0 and 255 and be non-decreasing. |
| This must be overridden in platform specific overlays --> |
| <integer-array name="config_autoBrightnessKeyboardBacklightValues"> |
| </integer-array> |
| |
| <!-- Amount of time it takes for the light sensor to warm up in milliseconds. |
| For this time after the screen turns on, the Power Manager |
| will not debounce light sensor readings --> |
| <integer name="config_lightSensorWarmupTime">0</integer> |
| |
| <!-- Enables swipe versus poly-finger touch disambiguation in the KeyboardView --> |
| <bool name="config_swipeDisambiguation">true</bool> |
| |
| <!-- Specifies the amount of time to disable virtual keys after the screen is touched |
| in order to filter out accidental virtual key presses due to swiping gestures |
| or taps near the edge of the display. May be 0 to disable the feature. |
| It is recommended that this value be no more than 250 ms. |
| This feature should be disabled for most devices. --> |
| <integer name="config_virtualKeyQuietTimeMillis">0</integer> |
| |
| <!-- Component name of the default wallpaper. This will be ImageWallpaper if not |
| specified --> |
| <string name="default_wallpaper_component" translatable="false">@null</string> |
| |
| <!-- True if WallpaperService is enabled --> |
| <bool name="config_enableWallpaperService">true</bool> |
| |
| <!-- Whether to enable network location overlay which allows network |
| location provider to be replaced by an app at run-time. When disabled, |
| only the config_networkLocationProviderPackageName package will be |
| searched for network location provider, otherwise packages whose |
| signature matches the signatures of config_locationProviderPackageNames |
| will be searched, and the service with the highest version number will |
| be picked. Anyone who wants to disable the overlay mechanism can set it |
| to false. |
| --> |
| <bool name="config_enableNetworkLocationOverlay" translatable="false">true</bool> |
| <!-- Package name providing network location support. Used only when |
| config_enableNetworkLocationOverlay is false. --> |
| <string name="config_networkLocationProviderPackageName" translatable="false">@null</string> |
| |
| <!-- Whether to enable fused location provider overlay which allows fused |
| location provider to be replaced by an app at run-time. When disabled, |
| only the config_fusedLocationProviderPackageName package will be |
| searched for fused location provider, otherwise packages whose |
| signature matches the signatures of config_locationProviderPackageNames |
| will be searched, and the service with the highest version number will |
| be picked. Anyone who wants to disable the overlay mechanism can set it |
| to false. |
| --> |
| <bool name="config_enableFusedLocationOverlay" translatable="false">true</bool> |
| <!-- Package name providing fused location support. Used only when |
| config_enableFusedLocationOverlay is false. --> |
| <string name="config_fusedLocationProviderPackageName" translatable="false">com.android.location.fused</string> |
| |
| <!-- Whether to enable geocoder overlay which allows geocoder to be replaced |
| by an app at run-time. When disabled, only the |
| config_geocoderProviderPackageName package will be searched for |
| geocoder, otherwise packages whose signature matches the signatures of |
| config_locationProviderPackageNames will be searched, and the service |
| with the highest version number will be picked. Anyone who wants to |
| disable the overlay mechanism can set it to false. |
| --> |
| <bool name="config_enableGeocoderOverlay" translatable="false">true</bool> |
| <!-- Package name providing geocoder API support. Used only when |
| config_enableGeocoderOverlay is false. --> |
| <string name="config_geocoderProviderPackageName" translatable="false">@null</string> |
| |
| <!-- Whether to enable geofence overlay which allows geofence to be replaced |
| by an app at run-time. When disabled, only the |
| config_geofenceProviderPackageName package will be searched for |
| geofence implementation, otherwise packages whose signature matches the |
| signatures of config_locationProviderPackageNames will be searched, and |
| the service with the highest version number will be picked. Anyone who |
| wants to disable the overlay mechanism can set it to false. |
| --> |
| <bool name="config_enableGeofenceOverlay" translatable="false">true</bool> |
| <!-- Package name providing geofence API support. Used only when |
| config_enableGeofenceOverlay is false. --> |
| <string name="config_geofenceProviderPackageName" translatable="false">@null</string> |
| |
| <!-- Package name(s) containing location provider support. |
| These packages can contain services implementing location providers, |
| such as the Geocode Provider, Network Location Provider, and |
| Fused Location Provider. They will each be searched for |
| service components implementing these providers. |
| It is strongly recommended that the packages explicitly named |
| below are on the system image, so that they will not map to |
| a 3rd party application. |
| The location framework also has support for installation |
| of new location providers at run-time. The new package does not |
| have to be explicitly listed here, however it must have a signature |
| that matches the signature of at least one package on this list. |
| --> |
| <string-array name="config_locationProviderPackageNames" translatable="false"> |
| <!-- The standard AOSP fused location provider --> |
| <item>com.android.location.fused</item> |
| </string-array> |
| |
| <!-- Boolean indicating if current platform supports bluetooth SCO for off call |
| use cases --> |
| <bool name="config_bluetooth_sco_off_call">true</bool> |
| |
| <!-- Boolean indicating if current platform supports bluetooth wide band |
| speech --> |
| <bool name="config_bluetooth_wide_band_speech">true</bool> |
| |
| <!-- Boolean indicating if current platform need do one-time bluetooth address |
| re-validation --> |
| <bool name="config_bluetooth_address_validation">false</bool> |
| |
| <!-- Boolean indicating if current platform supports BLE peripheral mode --> |
| <bool name="config_bluetooth_le_peripheral_mode_supported">false</bool> |
| |
| <!-- The default data-use polling period. --> |
| <integer name="config_datause_polling_period_sec">600</integer> |
| |
| <!-- The default data-use threshold in bytes. 0 disables--> |
| <integer name="config_datause_threshold_bytes">0</integer> |
| |
| <!-- The default reduced-datarate value in kilobits per sec --> |
| <integer name="config_datause_throttle_kbitsps">300</integer> |
| |
| <!-- The default iface on which to monitor data use --> |
| <string name="config_datause_iface" translatable="false">rmnet0</string> |
| |
| <!-- The default reduced-datarate notification mask --> |
| <!-- 2 means give warning --> |
| <integer name="config_datause_notification_type">2</integer> |
| |
| <!-- If Voice Radio Technology is RIL_RADIO_TECHNOLOGY_LTE:14 this is the value |
| that should be used instead. A value of RIL_RADIO_TECHNOLOGY_UNKNOWN:0 means |
| there is no replacement value and VoLTE is assumed to be supported --> |
| <integer name="config_volte_replacement_rat">0</integer> |
| |
| <!-- Flag indicating whether the current device is "voice capable". |
| If true, this means that the device supports circuit-switched |
| (i.e. voice) phone calls over the telephony network, and is |
| allowed to display the in-call UI while a cellular voice call is |
| active. This can be overridden to false for "data only" devices |
| which can't make voice calls and don't support any in-call UI. |
| |
| Note: this flag is subtly different from the |
| PackageManager.FEATURE_TELEPHONY system feature, which is |
| available on *any* device with a telephony radio, even if the |
| device is data-only. --> |
| <bool name="config_voice_capable">true</bool> |
| |
| <!-- Flag indicating whether the current device allows sms service. |
| If true, this means that the device supports both sending and |
| receiving sms via the telephony network. |
| This can be overridden to false for "data only" devices |
| which can't send and receive sms message. |
| |
| Note: Disable SMS also disable voicemail waiting sms, |
| cell broadcasting sms, and MMS. --> |
| <bool name="config_sms_capable">true</bool> |
| |
| <!-- Default SMS Application. This will be the default SMS application when |
| the phone first boots. The user can then change the default app to oe |
| of their choosing. |
| This can be overridden for devices where a different default SMS |
| application is desired. --> |
| <string name="default_sms_application" translatable="false">com.android.mms</string> |
| |
| <!-- Enable/disable default bluetooth profiles: |
| HSP_AG, ObexObjectPush, Audio, NAP --> |
| <bool name="config_bluetooth_default_profiles">true</bool> |
| |
| <!-- IP address of the dns server to use if nobody else suggests one --> |
| <string name="config_default_dns_server" translatable="false">8.8.8.8</string> |
| |
| <!-- The default mobile provisioning apn. Empty by default, maybe overridden by |
| an mcc/mnc specific config.xml --> |
| <string name="mobile_provisioning_apn" translatable="false"></string> |
| |
| <!-- The default mobile provisioning url. Empty by default, maybe overridden by |
| an mcc/mnc specific config.xml --> |
| <string name="mobile_provisioning_url" translatable="false"></string> |
| |
| <!-- This url is used as the default url when redirection is detected. Any |
| should work as all url's get redirected. But maybe overridden by |
| if needed. --> |
| <string name="mobile_redirected_provisioning_url" translatable="false">http://google.com</string> |
| |
| <!-- The default character set for GsmAlphabet --> |
| <!-- Empty string means MBCS is not considered --> |
| <string name="gsm_alphabet_default_charset" translatable="false"></string> |
| |
| <!-- Enables SIP on WIFI only --> |
| <bool name="config_sip_wifi_only">false</bool> |
| |
| <!-- Enables built-in SIP phone capability --> |
| <bool name="config_built_in_sip_phone">true</bool> |
| |
| <!-- Boolean indicating if restoring network selection should be skipped --> |
| <!-- The restoring is handled by modem if it is true--> |
| <bool translatable="false" name="skip_restoring_network_selection">false</bool> |
| |
| <!-- Maximum number of database connections opened and managed by framework layer |
| to handle queries on each database when using Write-Ahead Logging. --> |
| <integer name="db_connection_pool_size">4</integer> |
| |
| <!-- The default journal mode to use use when Write-Ahead Logging is not active. |
| Choices are: OFF, DELETE, TRUNCATE, PERSIST and MEMORY. |
| PERSIST may improve performance by reducing how often journal blocks are |
| reallocated (compared to truncation) resulting in better data block locality |
| and less churn of the storage media. --> |
| <string name="db_default_journal_mode">PERSIST</string> |
| |
| <!-- Maximum size of the persistent journal file in bytes. |
| If the journal file grows to be larger than this amount then SQLite will |
| truncate it after committing the transaction. --> |
| <integer name="db_journal_size_limit">524288</integer> |
| |
| <!-- The database synchronization mode when using the default journal mode. |
| FULL is safest and preserves durability at the cost of extra fsyncs. |
| NORMAL also preserves durability in non-WAL modes and uses checksums to ensure |
| integrity although there is a small chance that an error might go unnoticed. |
| Choices are: FULL, NORMAL, OFF. --> |
| <string name="db_default_sync_mode">FULL</string> |
| |
| <!-- The database synchronization mode when using Write-Ahead Logging. |
| FULL is safest and preserves durability at the cost of extra fsyncs. |
| NORMAL sacrifices durability in WAL mode because syncs are only performed before |
| and after checkpoint operations. If checkpoints are infrequent and power loss |
| occurs, then committed transactions could be lost and applications might break. |
| Choices are: FULL, NORMAL, OFF. --> |
| <string name="db_wal_sync_mode">FULL</string> |
| |
| <!-- The Write-Ahead Log auto-checkpoint interval in database pages (typically 1 to 4KB). |
| The log is checkpointed automatically whenever it exceeds this many pages. |
| When a database is reopened, its journal mode is set back to the default |
| journal mode, which may cause a checkpoint operation to occur. Checkpoints |
| can also happen at other times when transactions are committed. |
| The bigger the WAL file, the longer a checkpoint operation takes, so we try |
| to keep the WAL file relatively small to avoid long delays. |
| The size of the WAL file is also constrained by 'db_journal_size_limit'. --> |
| <integer name="db_wal_autocheckpoint">100</integer> |
| |
| <!-- Max space (in MB) allocated to DownloadManager to store the downloaded |
| files if they are to be stored in DownloadManager's data dir, |
| which typically is /data/data/com.android.providers.downloads/files --> |
| <integer name="config_downloadDataDirSize">100</integer> |
| |
| <!-- Max number of downloads allowed to proceed concurrently --> |
| <integer name="config_MaxConcurrentDownloadsAllowed">5</integer> |
| |
| <!-- When the free space available in DownloadManager's data dir falls |
| below the percentage value specified by this param, DownloadManager |
| starts removing files to try to make percentage of available |
| free space above this threshold value. --> |
| <integer name="config_downloadDataDirLowSpaceThreshold">10</integer> |
| |
| <!-- The URL that should be sent in an x-wap-profile header with an HTTP request, |
| as defined in the Open Mobile Alliance User Agent Profile specification |
| OMA-TS-UAProf-V2_0-20060206-A Section 8.1.1.1. If the URL contains a '%s' |
| format string then that substring will be replaced with the value of |
| Build.MODEL. The format string shall not be escaped. --> |
| <string name="config_useragentprofile_url" translatable="false"></string> |
| |
| <!-- When a database query is executed, the results retuned are paginated |
| in pages of size (in KB) indicated by this value --> |
| <integer name="config_cursorWindowSize">2048</integer> |
| |
| <!-- Sets whether menu shortcuts should be displayed on panel menus when |
| a keyboard is present. --> |
| <bool name="config_showMenuShortcutsWhenKeyboardPresent">false</bool> |
| |
| <!-- Do not translate. Defines the slots is Two Digit Number for dialing normally not USSD --> |
| <string-array name="config_twoDigitNumberPattern" translatable="false"> |
| </string-array> |
| |
| <!-- The VoiceMail default value is displayed to my own number if it is true --> |
| <bool name="config_telephony_use_own_number_for_voicemail">false</bool> |
| |
| <!-- If this value is true, Sms encoded as octet is decoded by utf8 decoder. |
| If false, decoded by Latin decoder. --> |
| <bool name="config_sms_utf8_support">false</bool> |
| |
| <!-- If this value is true, The mms content-disposition field is supported correctly. |
| If false, Content-disposition fragments are ignored --> |
| <bool name="config_mms_content_disposition_support">true</bool> |
| |
| <!-- MMS user agent string --> |
| <string name="config_mms_user_agent" translatable="false"></string> |
| |
| <!-- MMS user agent prolfile url --> |
| <string name="config_mms_user_agent_profile_url" translatable="false"></string> |
| |
| <!-- National Language Identifier codes for the following two config items. |
| (from 3GPP TS 23.038 V9.1.1 Table 6.2.1.2.4.1): |
| 0 - reserved |
| 1 - Turkish |
| 2 - Spanish (single shift table only) |
| 3 - Portuguese |
| 4 - Bengali |
| 5 - Gujarati |
| 6 - Hindi |
| 7 - Kannada |
| 8 - Malayalam |
| 9 - Oriya |
| 10 - Punjabi |
| 11 - Tamil |
| 12 - Telugu |
| 13 - Urdu |
| 14+ - reserved --> |
| |
| <!-- National language single shift tables to enable for SMS encoding. |
| Decoding is always enabled. 3GPP TS 23.038 states that this feature |
| should not be enabled until a formal request is issued by the relevant |
| national regulatory body. Array elements are codes from the table above. |
| Example 1: devices sold in Turkey must include table 1 to conform with |
| By-Law Number 27230. (http://www.btk.gov.tr/eng/pdf/2009/BY-LAW_SMS.pdf) |
| Example 2: devices sold in India should include tables 4 through 13 |
| to enable use of the new Release 9 tables for Indic languages. --> |
| <integer-array name="config_sms_enabled_single_shift_tables"></integer-array> |
| |
| <!-- National language locking shift tables to enable for SMS encoding. |
| Decoding is always enabled. 3GPP TS 23.038 states that this feature |
| should not be enabled until a formal request is issued by the relevant |
| national regulatory body. Array elements are codes from the table above. |
| Example 1: devices sold in Turkey must include table 1 after the |
| Turkish Telecommunication Authority requires locking shift encoding |
| to be enabled (est. July 2012). (http://www.btk.gov.tr/eng/pdf/2009/BY-LAW_SMS.pdf) |
| See also: http://www.mobitech.com.tr/tr/ersanozturkblog_en/index.php?entry=entry090223-160014 |
| Example 2: devices sold in India should include tables 4 through 13 |
| to enable use of the new Release 9 tables for Indic languages. --> |
| <integer-array name="config_sms_enabled_locking_shift_tables"></integer-array> |
| |
| <!-- Set to true if the RSSI should always display CDMA signal strength even on EVDO --> |
| <bool name="config_alwaysUseCdmaRssi">false</bool> |
| |
| |
| <!-- If this value is true, duplicate Source/Destination port fields |
| in WDP header of some carriers OMADM wap push are supported. |
| ex: MSGTYPE-TotalSegments-CurrentSegment |
| -SourcePortDestPort-SourcePortDestPort-OMADM PDU |
| If false, not supported. --> |
| <bool name="config_duplicate_port_omadm_wappush">false</bool> |
| |
| <!-- Maximum numerical value that will be shown in a status bar |
| notification icon or in the notification itself. Will be replaced |
| with @string/status_bar_notification_info_overflow when shown in the |
| UI. --> |
| <integer name="status_bar_notification_info_maxnum">999</integer> |
| |
| <!-- Path to an ISO image to be shared with via USB mass storage. |
| This is intended to allow packaging drivers or tools for installation on a PC. --> |
| <string translatable="false" name="config_isoImagePath"></string> |
| |
| <!-- Whether a software navigation bar should be shown. NOTE: in the future this may be |
| autodetected from the Configuration. --> |
| <bool name="config_showNavigationBar">false</bool> |
| |
| <!-- Whether action menu items should be displayed in ALLCAPS or not. |
| Defaults to true. If this is not appropriate for specific locales |
| it should be disabled in that locale's resources. --> |
| <bool name="config_actionMenuItemAllCaps">true</bool> |
| |
| <!-- Whether action menu items should obey the "withText" showAsAction |
| flag. This may be set to false for situations where space is |
| extremely limited. --> |
| <bool name="config_allowActionMenuItemTextWithIcon">false</bool> |
| |
| <!-- Remote server that can provide NTP responses. --> |
| <string translatable="false" name="config_ntpServer">2.android.pool.ntp.org</string> |
| <!-- Normal polling frequency in milliseconds --> |
| <integer name="config_ntpPollingInterval">864000000</integer> |
| <!-- Try-again polling interval in milliseconds, in case the network request failed --> |
| <integer name="config_ntpPollingIntervalShorter">60000</integer> |
| <!-- Number of times to try again with the shorter interval, before backing |
| off until the normal polling interval. A value < 0 indicates infinite. --> |
| <integer name="config_ntpRetry">3</integer> |
| <!-- If the time difference is greater than this threshold in milliseconds, |
| then update the time. --> |
| <integer name="config_ntpThreshold">5000</integer> |
| <!-- Timeout to wait for NTP server response. --> |
| <integer name="config_ntpTimeout">20000</integer> |
| |
| <!-- Default network policy warning threshold, in megabytes. --> |
| <integer name="config_networkPolicyDefaultWarning">2048</integer> |
| |
| <!-- Set and Unsets WiMAX --> |
| <bool name="config_wimaxEnabled">false</bool> |
| <!-- Location of the wimax framwork jar location --> |
| <string name="config_wimaxServiceJarLocation" translatable="false"></string> |
| <!-- Location of the wimax native library locaiton --> |
| <string name="config_wimaxNativeLibLocation" translatable="false"></string> |
| <!-- Name of the wimax manager class --> |
| <string name="config_wimaxManagerClassname" translatable="false"></string> |
| <!-- Name of the wimax service class --> |
| <string name="config_wimaxServiceClassname" translatable="false"></string> |
| <!-- Name of the wimax state tracker clas --> |
| <string name="config_wimaxStateTrackerClassname" translatable="false"></string> |
| |
| <!-- Is the dreams feature supported? --> |
| <bool name="config_dreamsSupported">true</bool> |
| <!-- If supported, are dreams enabled? (by default) --> |
| <bool name="config_dreamsEnabledByDefault">true</bool> |
| <!-- If supported and enabled, are dreams activated when docked? (by default) --> |
| <bool name="config_dreamsActivatedOnDockByDefault">true</bool> |
| <!-- If supported and enabled, are dreams activated when asleep and charging? (by default) --> |
| <bool name="config_dreamsActivatedOnSleepByDefault">false</bool> |
| <!-- ComponentName of the default dream (Settings.Secure.SCREENSAVER_COMPONENT) --> |
| <string name="config_dreamsDefaultComponent">com.google.android.deskclock/com.android.deskclock.Screensaver</string> |
| |
| <!-- Base "touch slop" value used by ViewConfiguration as a |
| movement threshold where scrolling should begin. --> |
| <dimen name="config_viewConfigurationTouchSlop">8dp</dimen> |
| |
| <!-- Maximum number of grid columns permitted in the ResolverActivity |
| used for picking activities to handle an intent. --> |
| <integer name="config_maxResolverActivityColumns">2</integer> |
| |
| <!-- Array of OEM specific USB mode override config. |
| OEM can override a certain USB mode depending on ro.bootmode. |
| Specify an array of below items to set override rule. |
| [bootmode]:[original USB mode]:[USB mode used]--> |
| <integer-array translatable="false" name="config_oemUsbModeOverride"> |
| </integer-array> |
| |
| <!-- Set to true to add links to Cell Broadcast app from Settings and MMS app. --> |
| <bool name="config_cellBroadcastAppLinks">false</bool> |
| |
| <!-- The default value if the SyncStorageEngine should sync automatically or not --> |
| <bool name="config_syncstorageengine_masterSyncAutomatically">true</bool> |
| |
| <!-- Maximum number of supported users --> |
| <integer name="config_multiuserMaximumUsers">1</integer> |
| |
| <!-- Minimum span needed to begin a touch scaling gesture. |
| If the span is equal to or greater than this size, a scaling gesture |
| will begin, where supported. (See android.view.ScaleGestureDetector) |
| |
| This also takes into account the size of any active touch points. |
| Devices with screens that deviate too far from their assigned density |
| bucket should consider tuning this value in a device-specific overlay. |
| For best results, care should be taken such that this value remains |
| larger than the minimum reported touchMajor/touchMinor values |
| reported by the hardware. --> |
| <dimen name="config_minScalingSpan">27mm</dimen> |
| |
| <!-- Minimum accepted value for touchMajor while scaling. This may be tuned |
| per-device in overlays. --> |
| <dimen name="config_minScalingTouchMajor">48dp</dimen> |
| |
| <!-- Safe headphone volume index. When music stream volume is below this index |
| the SPL on headphone output is compliant to EN 60950 requirements for portable music |
| players. --> |
| <integer name="config_safe_media_volume_index">10</integer> |
| |
| <!-- Configure mobile network MTU. The standard default is set here but each carrier |
| may have a specific value set in an overlay config.xml file. --> |
| <integer name="config_mobile_mtu">1500</integer> |
| |
| <!-- Whether WiFi display is supported by this device. |
| There are many prerequisites for this feature to work correctly. |
| Here are a few of them: |
| * The WiFi radio must support WiFi P2P. |
| * The WiFi radio must support concurrent connections to the WiFi display and |
| to an access point. |
| * The Audio Flinger audio_policy.conf file must specify a rule for the "r_submix" |
| remote submix module. This module is used to record and stream system |
| audio output to the WiFi display encoder in the media server. |
| * The remote submix module "audio.r_submix.default" must be installed on the device. |
| * The device must be provisioned with HDCP keys (for protected content). |
| --> |
| <bool name="config_enableWifiDisplay">false</bool> |
| |
| <!-- When true use the linux /dev/input/event subsystem to detect the switch changes |
| on the headphone/microphone jack. When false use the older uevent framework. --> |
| <bool name="config_useDevInputEventForAudioJack">false</bool> |
| |
| <!-- Whether safe headphone volume is enabled or not (country specific). --> |
| <bool name="config_safe_media_volume_enabled">true</bool> |
| |
| <!-- Set to true if the wifi display supports compositing content stored |
| in gralloc protected buffers. For this to be true, there must exist |
| a protected hardware path for surface flinger to composite and send |
| protected buffers to the wifi display video encoder. |
| |
| If this flag is false, we advise applications not to use protected |
| buffers (if possible) when presenting content to a wifi display because |
| the content may be blanked. |
| |
| This flag controls whether the {@link Display#FLAG_SUPPORTS_PROTECTED_BUFFERS} |
| flag is set for wifi displays. |
| --> |
| <bool name="config_wifiDisplaySupportsProtectedBuffers">false</bool> |
| |
| <!-- Whether camera shutter sound is forced or not (country specific). --> |
| <bool name="config_camera_sound_forced">false</bool> |
| |
| <!-- Set to true if we need to not prefer an APN. |
| This is being added to enable a simple scenario of pre-paid |
| provisioning on some carriers, working around a bug (7305641) |
| where if the preferred is used we don't try the others. --> |
| <bool name="config_dontPreferApn">false</bool> |
| |
| <!-- Vibrator pattern to be used as the default for notifications |
| that specify DEFAULT_VIBRATE. |
| --> |
| <integer-array name="config_defaultNotificationVibePattern"> |
| <item>0</item> |
| <item>350</item> |
| <item>250</item> |
| <item>350</item> |
| </integer-array> |
| |
| <!-- Vibrator pattern to be used as the default for notifications |
| that do not specify vibration but vibrate anyway because the device |
| is in vibrate mode. |
| --> |
| <integer-array name="config_notificationFallbackVibePattern"> |
| <item>0</item> |
| <item>100</item> |
| <item>150</item> |
| <item>100</item> |
| </integer-array> |
| |
| <!-- Flag indicating if the speed up audio on mt call code should be executed --> |
| <bool name="config_speed_up_audio_on_mt_calls">false</bool> |
| |
| <!-- Class name of the framework account picker activity. |
| Can be customized for other product types --> |
| <string name="config_chooseAccountActivity" |
| >android/android.accounts.ChooseAccountActivity</string> |
| <!-- Class name of the account type and account picker activity. |
| Can be customized for other product types --> |
| <string name="config_chooseTypeAndAccountActivity" |
| >android/android.accounts.ChooseTypeAndAccountActivity</string> |
| |
| <!-- Component name of a custom ResolverActivity (Intent resolver) to be used instead of |
| the default framework version. If left empty, then the framework version will be used. |
| Example: com.google.android.myapp/.resolver.MyResolverActivity --> |
| <string name="config_customResolverActivity"></string> |
| |
| <!-- Apps that are authorized to access shared accounts, overridden by product overlays --> |
| <string name="config_appsAuthorizedForSharedAccounts">;com.android.settings;</string> |
| |
| <!-- Flag indicating that the media framework should not allow changes or mute on any |
| stream or master volumes. --> |
| <bool name="config_useFixedVolume">false</bool> |
| |
| <!-- The list of IMEs which should be disabled until used. |
| This function suppresses update notifications for these pre-installed apps. |
| We need to set this configuration carefully that they should not have functionarities |
| other than "IME" or "Spell Checker". In InputMethodManagerService, |
| the listed IMEs are disabled until used when all of the following conditions are met. |
| 1. Not selected as an enabled IME in the Settings |
| 2. Not selected as a spell checker in the Settings |
| 3. Installed |
| 4. A pre-installed IME |
| 5. Not enabled |
| And the disabled_until_used state for an IME is released by InputMethodManagerService |
| when the IME is selected as an enabled IME. --> |
| <string-array name="config_disabledUntilUsedPreinstalledImes" translatable="false"> |
| <item>com.android.inputmethod.latin</item> |
| </string-array> |
| |
| <string-array name="config_notificationScorers"> |
| <item>com.android.internal.notification.DemoContactNotificationScorer</item> |
| </string-array> |
| |
| <!-- Flag indicating that this device does not rotate and will always remain in its default |
| orientation. Activities that desire to run in a non-compatible orientation will be run |
| from an emulated display within the physical display. --> |
| <bool name="config_forceDefaultOrientation">false</bool> |
| |
| <!-- Default Gravity setting for the system Toast view. Equivalent to: Gravity.CENTER_HORIZONTAL | Gravity.BOTTOM --> |
| <integer name="config_toastDefaultGravity">0x00000051</integer> |
| |
| <!-- set to false if we need to show user confirmation |
| when alpha identifier is not provided by the UICC --> |
| <bool name="config_stkNoAlphaUsrCnf">true</bool> |
| |
| <!-- Don't use roaming icon for considered operators. |
| Can use mcc or mcc+mnc as item. For example, 302 or 21407. |
| If operators, 21404 and 21407, make roaming agreements, user of 21404 should not see |
| the roaming icon as using 21407 network. |
| To do this, add 21407 item to values-mcc214-mnc04/config.xml --> |
| <string-array translatable="false" name="config_operatorConsideredNonRoaming"> |
| </string-array> |
| |
| <!-- Threshold (in ms) under which a screen off / screen on will be considered a reset of the |
| immersive mode confirmation prompt.--> |
| <integer name="config_immersive_mode_confirmation_panic">5000</integer> |
| |
| <!-- For some operators, PDU has garbages. To fix it, need to use valid index --> |
| <integer name="config_valid_wappush_index">-1</integer> |
| |
| <!-- Show roaming icon though same named operators. |
| Uses "startsWith" so you can use a leading substring like the mcc or |
| use the complete mcc+mnc string. |
| Though same mcc and same operator name, some operator want to roam. |
| user of 40485 should see the roaming icon as using 40483 network |
| though same Reliance network. |
| To do this, add 40483 item to values-mcc404-mnc85/config.xml --> |
| <string-array translatable="false" name="config_sameNamedOperatorConsideredRoaming"> |
| </string-array> |
| <!-- call barring MMI code from TS 22.030 Annex B --> |
| <string-array translatable="false" name="config_callBarringMMI"> |
| <item>33</item> |
| <item>331</item> |
| <item>332</item> |
| <item>35</item> |
| <item>351</item> |
| <item>330</item> |
| <item>333</item> |
| <item>353</item> |
| </string-array> |
| </resources> |