libs/WindowManager/Shell/res/values/dimen.xml - platform/frameworks/base - Git at Google


            
            <?xml version="1.0" encoding="utf-8"?>

            
            <!--

            
                Copyright (C) 2020 The Android Open Source Project


                Licensed under the Apache License, Version 2.0 (the "License");

            
                you may not use this file except in compliance with the License.

            
                You may obtain a copy of the License at


                     http://www.apache.org/licenses/LICENSE-2.0


                Unless required by applicable law or agreed to in writing, software

            
                distributed under the License is distributed on an "AS IS" BASIS,

            
                WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

            
                See the License for the specific language governing permissions and

            
                limitations under the License.

            
            -->

            
            <resources>

            
                <dimen name="dismiss_circle_size">96dp</dimen>

            
                <dimen name="dismiss_circle_small">60dp</dimen>


                <!-- The height of the gradient indicating the dismiss edge when moving a PIP. -->

            
                <dimen name="floating_dismiss_gradient_height">250dp</dimen>


                <!-- The padding around a PiP actions. -->

            
                <dimen name="pip_action_padding">16dp</dimen>


                <!-- The height of the PiP actions container in which the actions are vertically centered. -->

            
                <dimen name="pip_action_size">48dp</dimen>


                <!-- The width and height of the PiP action asset drawn within the container. -->

            
                <dimen name="pip_action_inner_size">20dp</dimen>


                <!-- The width and height of the PiP expand action container. -->

            
                <dimen name="pip_expand_action_size">60dp</dimen>


                <!-- The width and height of the PiP expand action asset drawn within the container. -->

            
                <dimen name="pip_expand_action_inner_size">28dp</dimen>


                <!-- The padding between actions in the PiP in landscape  Note that the PiP does not reflect

            
                     the configuration of the device, so we can't use -land resources. -->

            
                <dimen name="pip_between_action_padding_land">8dp</dimen>


                <!-- The buffer to use when calculating whether the pip is in an adjust zone. -->

            
                <dimen name="pip_bottom_offset_buffer">1dp</dimen>


                <!-- The corner radius for PiP window. -->

            
                <dimen name="pip_corner_radius">16dp</dimen>


                <!-- The bottom margin of the PIP drag to dismiss info text shown when moving a PIP. -->

            
                <dimen name="pip_dismiss_text_bottom_margin">24dp</dimen>


                <!-- The bottom margin of the expand container when there are actions.

            
                     Equal to pip_action_size - pip_action_padding. -->

            
                <dimen name="pip_expand_container_edge_margin">30dp</dimen>


                <!-- The shortest-edge size of the expanded PiP. -->

            
                <dimen name="pip_expanded_shortest_edge_size">160dp</dimen>


                <!-- The additional offset to apply to the IME animation to account for the input field. -->

            
                <dimen name="pip_ime_offset">48dp</dimen>


                <!-- The touchable/draggable edge size for PIP resize. -->

            
                <dimen name="pip_resize_edge_size">48dp</dimen>


                <!-- PIP Resize handle size, margin and padding. -->

            
                <dimen name="pip_resize_handle_size">12dp</dimen>

            
                <dimen name="pip_resize_handle_margin">4dp</dimen>

            
                <dimen name="pip_resize_handle_padding">0dp</dimen>


                <!-- PIP stash offset size, which is the width of visible PIP region when stashed. -->

            
                <dimen name="pip_stash_offset">32dp</dimen>


                <dimen name="dismiss_target_x_size">24dp</dimen>

            
                <dimen name="floating_dismiss_bottom_margin">50dp</dimen>


                <!-- How high we lift the divider when touching -->

            
                <dimen name="docked_stack_divider_lift_elevation">4dp</dimen>


                <dimen name="docked_divider_handle_width">16dp</dimen>

            
                <dimen name="docked_divider_handle_height">2dp</dimen>


                <!-- One-Handed Mode -->

            
                <!-- Threshold for dragging distance to enable one-handed mode -->

            
                <dimen name="gestures_onehanded_drag_threshold">20dp</dimen>


                <!-- The amount to inset the drop target regions from the edge of the display -->

            
                <dimen name="drop_layout_display_margin">16dp</dimen>


                <!-- How much each bubble is elevated. -->

            
                <dimen name="bubble_elevation">1dp</dimen>

            
                <!-- How much the bubble flyout text container is elevated. -->

            
                <dimen name="bubble_flyout_elevation">4dp</dimen>

            
                <!-- How much padding is around the left and right sides of the flyout text. -->

            
                <dimen name="bubble_flyout_padding_x">14dp</dimen>

            
                <!-- How much padding is around the top and bottom of the flyout text. -->

            
                <dimen name="bubble_flyout_padding_y">10dp</dimen>

            
                <!-- Size of the triangle that points from the flyout to the bubble stack. -->

            
                <dimen name="bubble_flyout_pointer_size">6dp</dimen>

            
                <!-- How much space to leave between the flyout (tip of the arrow) and the bubble stack. -->

            
                <dimen name="bubble_flyout_space_from_bubble">8dp</dimen>

            
                <!-- How much space to leave between the flyout text and the avatar displayed in the flyout. -->

            
                <dimen name="bubble_flyout_avatar_message_space">6dp</dimen>

            
                <!-- Padding between status bar and bubbles when displayed in expanded state -->

            
                <dimen name="bubble_padding_top">16dp</dimen>

            
                <!-- Space between bubbles when expanded. -->

            
                <dimen name="bubble_spacing">3dp</dimen>

            
                <!-- Size of the bubble. -->

            
                <dimen name="bubble_size">60dp</dimen>

            
                <!-- Size of the badge shown on the bubble. -->

            
                <dimen name="bubble_badge_size">24dp</dimen>

            
                <!-- Extra padding added to the touchable rect for bubbles so they are easier to grab. -->

            
                <dimen name="bubble_touch_padding">12dp</dimen>

            
                <!-- Size of the circle around the bubbles when they're in the dismiss target. -->

            
                <dimen name="bubble_dismiss_encircle_size">52dp</dimen>

            
                <!-- Padding around the view displayed when the bubble is expanded -->

            
                <dimen name="bubble_expanded_view_padding">16dp</dimen>

            
                <!-- This should be at least the size of bubble_expanded_view_padding; it is used to include

            
                     a slight touch slop around the expanded view. -->

            
                <dimen name="bubble_expanded_view_slop">8dp</dimen>

            
                <!-- Default (and minimum) height of the expanded view shown when the bubble is expanded.

            
                     If this value changes then R.dimen.bubble_expanded_view_min_height in CtsVerifier

            
                     should also be updated. -->

            
                <dimen name="bubble_expanded_default_height">180dp</dimen>

            
                <!-- On large screens the width of the expanded view is restricted to this size. -->

            
                <dimen name="bubble_expanded_view_tablet_width">412dp</dimen>

            
                <!-- Inset to apply to the icon in the overflow button. -->

            
                <dimen name="bubble_overflow_icon_inset">30dp</dimen>

            
                <!-- Default (and minimum) height of bubble overflow -->

            
                <dimen name="bubble_overflow_height">480dp</dimen>

            
                <!-- Bubble overflow padding when there are no bubbles  -->

            
                <dimen name="bubble_overflow_empty_state_padding">16dp</dimen>

            
                <!-- Padding of container for overflow bubbles -->

            
                <dimen name="bubble_overflow_padding">15dp</dimen>

            
                <!-- Padding of label for bubble overflow view -->

            
                <dimen name="bubble_overflow_text_padding">7dp</dimen>

            
                <!-- Height of bubble overflow empty state illustration -->

            
                <dimen name="bubble_empty_overflow_image_height">200dp</dimen>

            
                <!-- Padding of bubble overflow empty state subtitle -->

            
                <dimen name="bubble_empty_overflow_subtitle_padding">50dp</dimen>

            
                <!-- Height of the triangle that points to the expanded bubble. -->

            
                <dimen name="bubble_pointer_height">10dp</dimen>

            
                <!-- Width of the triangle that points to the expanded bubble. -->

            
                <dimen name="bubble_pointer_width">12dp</dimen>

            
                <!-- Radius of the pointer -->

            
                <dimen name="bubble_pointer_radius">2dp</dimen>

            
                <!-- The amount the pointer overlaps with the expanded view to be flush on an edge with

            
                     a radius. -->

            
                <dimen name="bubble_pointer_overlap">1dp</dimen>

            
                <!-- Extra padding around the dismiss target for bubbles -->

            
                <dimen name="bubble_dismiss_slop">16dp</dimen>

            
                <!-- Height of button allowing users to adjust settings for bubbles. -->

            
                <dimen name="bubble_manage_button_height">56dp</dimen>

            
                <!-- Height of an item in the bubble manage menu. -->

            
                <dimen name="bubble_menu_item_height">60dp</dimen>

            
                <!-- Max width of the message bubble-->

            
                <dimen name="bubble_message_max_width">144dp</dimen>

            
                <!-- Min width of the message bubble -->

            
                <dimen name="bubble_message_min_width">32dp</dimen>

            
                <!-- Interior padding of the message bubble -->

            
                <dimen name="bubble_message_padding">4dp</dimen>

            
                <!-- Offset between bubbles in their stacked position. -->

            
                <dimen name="bubble_stack_offset">12dp</dimen>

            
                <!-- Offset between stack y and animation y for bubble swap. -->

            
                <dimen name="bubble_swap_animation_offset">15dp</dimen>

            
                <!-- How far offscreen the bubble stack rests. There's some padding around the bubble so

            
                     add 3dp to the desired overhang. -->

            
                <dimen name="bubble_stack_offscreen">3dp</dimen>

            
                <!-- How far down the screen the stack starts. -->

            
                <dimen name="bubble_stack_starting_offset_y">120dp</dimen>

            
                <!-- Space between the pointer triangle and the bubble expanded view -->

            
                <dimen name="bubble_pointer_margin">5dp</dimen>

            
                <!-- Padding applied to the bubble dismiss target. Touches in this padding cause the bubbles to

            
                     snap to the dismiss target. -->

            
                <dimen name="bubble_dismiss_target_padding_x">40dp</dimen>

            
                <dimen name="bubble_dismiss_target_padding_y">20dp</dimen>

            
                <dimen name="bubble_manage_menu_elevation">4dp</dimen>


                <!-- Bubbles user education views -->

            
                <dimen name="bubbles_manage_education_width">160dp</dimen>

            
                <!-- The inset from the top bound of the manage button to place the user education. -->

            
                <dimen name="bubbles_manage_education_top_inset">65dp</dimen>

            
                <!-- Size of padding for the user education cling, this should at minimum be larger than

            
                    individual_bubble_size + some padding. -->

            
                <dimen name="bubble_stack_user_education_side_inset">72dp</dimen>


                <!-- The width/height of the size compat restart button. -->

            
                <dimen name="size_compat_button_size">48dp</dimen>


                <!-- The width of the brand image on staring surface. -->

            
                <dimen name="starting_surface_brand_image_width">200dp</dimen>


                <!-- The height of the brand image on staring surface. -->

            
                <dimen name="starting_surface_brand_image_height">80dp</dimen>


                <!-- The length of the shift of main window when exit starting window. -->

            
                <dimen name="starting_surface_exit_animation_window_shift_length">20dp</dimen>


                <!-- The distance of the shift icon when normal exit starting window. -->

            
                <dimen name="starting_surface_normal_exit_icon_distance">120dp</dimen>


                <!-- The distance of the shift icon when early exit starting window. -->

            
                <dimen name="starting_surface_early_exit_icon_distance">32dp</dimen>

            
            </resources>
	<?xml version="1.0" encoding="utf-8"?>
	<!--
	Copyright (C) 2020 The Android Open Source Project

	Licensed under the Apache License, Version 2.0 (the "License");
	you may not use this file except in compliance with the License.
	You may obtain a copy of the License at

	http://www.apache.org/licenses/LICENSE-2.0

	Unless required by applicable law or agreed to in writing, software
	distributed under the License is distributed on an "AS IS" BASIS,
	WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	See the License for the specific language governing permissions and
	limitations under the License.
	-->
	<resources>
	<dimen name="dismiss_circle_size">96dp</dimen>
	<dimen name="dismiss_circle_small">60dp</dimen>

	<!-- The height of the gradient indicating the dismiss edge when moving a PIP. -->
	<dimen name="floating_dismiss_gradient_height">250dp</dimen>

	<!-- The padding around a PiP actions. -->
	<dimen name="pip_action_padding">16dp</dimen>

	<!-- The height of the PiP actions container in which the actions are vertically centered. -->
	<dimen name="pip_action_size">48dp</dimen>

	<!-- The width and height of the PiP action asset drawn within the container. -->
	<dimen name="pip_action_inner_size">20dp</dimen>

	<!-- The width and height of the PiP expand action container. -->
	<dimen name="pip_expand_action_size">60dp</dimen>

	<!-- The width and height of the PiP expand action asset drawn within the container. -->
	<dimen name="pip_expand_action_inner_size">28dp</dimen>

	<!-- The padding between actions in the PiP in landscape Note that the PiP does not reflect
	the configuration of the device, so we can't use -land resources. -->
	<dimen name="pip_between_action_padding_land">8dp</dimen>

	<!-- The buffer to use when calculating whether the pip is in an adjust zone. -->
	<dimen name="pip_bottom_offset_buffer">1dp</dimen>

	<!-- The corner radius for PiP window. -->
	<dimen name="pip_corner_radius">16dp</dimen>

	<!-- The bottom margin of the PIP drag to dismiss info text shown when moving a PIP. -->
	<dimen name="pip_dismiss_text_bottom_margin">24dp</dimen>

	<!-- The bottom margin of the expand container when there are actions.
	Equal to pip_action_size - pip_action_padding. -->
	<dimen name="pip_expand_container_edge_margin">30dp</dimen>

	<!-- The shortest-edge size of the expanded PiP. -->
	<dimen name="pip_expanded_shortest_edge_size">160dp</dimen>

	<!-- The additional offset to apply to the IME animation to account for the input field. -->
	<dimen name="pip_ime_offset">48dp</dimen>

	<!-- The touchable/draggable edge size for PIP resize. -->
	<dimen name="pip_resize_edge_size">48dp</dimen>

	<!-- PIP Resize handle size, margin and padding. -->
	<dimen name="pip_resize_handle_size">12dp</dimen>
	<dimen name="pip_resize_handle_margin">4dp</dimen>
	<dimen name="pip_resize_handle_padding">0dp</dimen>

	<!-- PIP stash offset size, which is the width of visible PIP region when stashed. -->
	<dimen name="pip_stash_offset">32dp</dimen>

	<dimen name="dismiss_target_x_size">24dp</dimen>
	<dimen name="floating_dismiss_bottom_margin">50dp</dimen>

	<!-- How high we lift the divider when touching -->
	<dimen name="docked_stack_divider_lift_elevation">4dp</dimen>

	<dimen name="docked_divider_handle_width">16dp</dimen>
	<dimen name="docked_divider_handle_height">2dp</dimen>

	<!-- One-Handed Mode -->
	<!-- Threshold for dragging distance to enable one-handed mode -->
	<dimen name="gestures_onehanded_drag_threshold">20dp</dimen>

	<!-- The amount to inset the drop target regions from the edge of the display -->
	<dimen name="drop_layout_display_margin">16dp</dimen>

	<!-- How much each bubble is elevated. -->
	<dimen name="bubble_elevation">1dp</dimen>
	<!-- How much the bubble flyout text container is elevated. -->
	<dimen name="bubble_flyout_elevation">4dp</dimen>
	<!-- How much padding is around the left and right sides of the flyout text. -->
	<dimen name="bubble_flyout_padding_x">14dp</dimen>
	<!-- How much padding is around the top and bottom of the flyout text. -->
	<dimen name="bubble_flyout_padding_y">10dp</dimen>
	<!-- Size of the triangle that points from the flyout to the bubble stack. -->
	<dimen name="bubble_flyout_pointer_size">6dp</dimen>
	<!-- How much space to leave between the flyout (tip of the arrow) and the bubble stack. -->
	<dimen name="bubble_flyout_space_from_bubble">8dp</dimen>
	<!-- How much space to leave between the flyout text and the avatar displayed in the flyout. -->
	<dimen name="bubble_flyout_avatar_message_space">6dp</dimen>
	<!-- Padding between status bar and bubbles when displayed in expanded state -->
	<dimen name="bubble_padding_top">16dp</dimen>
	<!-- Space between bubbles when expanded. -->
	<dimen name="bubble_spacing">3dp</dimen>
	<!-- Size of the bubble. -->
	<dimen name="bubble_size">60dp</dimen>
	<!-- Size of the badge shown on the bubble. -->
	<dimen name="bubble_badge_size">24dp</dimen>
	<!-- Extra padding added to the touchable rect for bubbles so they are easier to grab. -->
	<dimen name="bubble_touch_padding">12dp</dimen>
	<!-- Size of the circle around the bubbles when they're in the dismiss target. -->
	<dimen name="bubble_dismiss_encircle_size">52dp</dimen>
	<!-- Padding around the view displayed when the bubble is expanded -->
	<dimen name="bubble_expanded_view_padding">16dp</dimen>
	<!-- This should be at least the size of bubble_expanded_view_padding; it is used to include
	a slight touch slop around the expanded view. -->
	<dimen name="bubble_expanded_view_slop">8dp</dimen>
	<!-- Default (and minimum) height of the expanded view shown when the bubble is expanded.
	If this value changes then R.dimen.bubble_expanded_view_min_height in CtsVerifier
	should also be updated. -->
	<dimen name="bubble_expanded_default_height">180dp</dimen>
	<!-- On large screens the width of the expanded view is restricted to this size. -->
	<dimen name="bubble_expanded_view_tablet_width">412dp</dimen>
	<!-- Inset to apply to the icon in the overflow button. -->
	<dimen name="bubble_overflow_icon_inset">30dp</dimen>
	<!-- Default (and minimum) height of bubble overflow -->
	<dimen name="bubble_overflow_height">480dp</dimen>
	<!-- Bubble overflow padding when there are no bubbles -->
	<dimen name="bubble_overflow_empty_state_padding">16dp</dimen>
	<!-- Padding of container for overflow bubbles -->
	<dimen name="bubble_overflow_padding">15dp</dimen>
	<!-- Padding of label for bubble overflow view -->
	<dimen name="bubble_overflow_text_padding">7dp</dimen>
	<!-- Height of bubble overflow empty state illustration -->
	<dimen name="bubble_empty_overflow_image_height">200dp</dimen>
	<!-- Padding of bubble overflow empty state subtitle -->
	<dimen name="bubble_empty_overflow_subtitle_padding">50dp</dimen>
	<!-- Height of the triangle that points to the expanded bubble. -->
	<dimen name="bubble_pointer_height">10dp</dimen>
	<!-- Width of the triangle that points to the expanded bubble. -->
	<dimen name="bubble_pointer_width">12dp</dimen>
	<!-- Radius of the pointer -->
	<dimen name="bubble_pointer_radius">2dp</dimen>
	<!-- The amount the pointer overlaps with the expanded view to be flush on an edge with
	a radius. -->
	<dimen name="bubble_pointer_overlap">1dp</dimen>
	<!-- Extra padding around the dismiss target for bubbles -->
	<dimen name="bubble_dismiss_slop">16dp</dimen>
	<!-- Height of button allowing users to adjust settings for bubbles. -->
	<dimen name="bubble_manage_button_height">56dp</dimen>
	<!-- Height of an item in the bubble manage menu. -->
	<dimen name="bubble_menu_item_height">60dp</dimen>
	<!-- Max width of the message bubble-->
	<dimen name="bubble_message_max_width">144dp</dimen>
	<!-- Min width of the message bubble -->
	<dimen name="bubble_message_min_width">32dp</dimen>
	<!-- Interior padding of the message bubble -->
	<dimen name="bubble_message_padding">4dp</dimen>
	<!-- Offset between bubbles in their stacked position. -->
	<dimen name="bubble_stack_offset">12dp</dimen>
	<!-- Offset between stack y and animation y for bubble swap. -->
	<dimen name="bubble_swap_animation_offset">15dp</dimen>
	<!-- How far offscreen the bubble stack rests. There's some padding around the bubble so
	add 3dp to the desired overhang. -->
	<dimen name="bubble_stack_offscreen">3dp</dimen>
	<!-- How far down the screen the stack starts. -->
	<dimen name="bubble_stack_starting_offset_y">120dp</dimen>
	<!-- Space between the pointer triangle and the bubble expanded view -->
	<dimen name="bubble_pointer_margin">5dp</dimen>
	<!-- Padding applied to the bubble dismiss target. Touches in this padding cause the bubbles to
	snap to the dismiss target. -->
	<dimen name="bubble_dismiss_target_padding_x">40dp</dimen>
	<dimen name="bubble_dismiss_target_padding_y">20dp</dimen>
	<dimen name="bubble_manage_menu_elevation">4dp</dimen>

	<!-- Bubbles user education views -->
	<dimen name="bubbles_manage_education_width">160dp</dimen>
	<!-- The inset from the top bound of the manage button to place the user education. -->
	<dimen name="bubbles_manage_education_top_inset">65dp</dimen>
	<!-- Size of padding for the user education cling, this should at minimum be larger than
	individual_bubble_size + some padding. -->
	<dimen name="bubble_stack_user_education_side_inset">72dp</dimen>

	<!-- The width/height of the size compat restart button. -->
	<dimen name="size_compat_button_size">48dp</dimen>

	<!-- The width of the brand image on staring surface. -->
	<dimen name="starting_surface_brand_image_width">200dp</dimen>

	<!-- The height of the brand image on staring surface. -->
	<dimen name="starting_surface_brand_image_height">80dp</dimen>

	<!-- The length of the shift of main window when exit starting window. -->
	<dimen name="starting_surface_exit_animation_window_shift_length">20dp</dimen>

	<!-- The distance of the shift icon when normal exit starting window. -->
	<dimen name="starting_surface_normal_exit_icon_distance">120dp</dimen>

	<!-- The distance of the shift icon when early exit starting window. -->
	<dimen name="starting_surface_early_exit_icon_distance">32dp</dimen>
	</resources>