blob: a8e217e4e51003e1c9bfc0b9f5db1890050d2a1f [file] [log] [blame]
/*
**
** Copyright (C) 2008, The Android Open Source Project
** Copyright (C) 2008 HTC Inc.
**
** Licensed under the Apache License, Version 2.0 (the "License");
** you may not use this file except in compliance with the License.
** You may obtain a copy of the License at
**
** http://www.apache.org/licenses/LICENSE-2.0
**
** Unless required by applicable law or agreed to in writing, software
** distributed under the License is distributed on an "AS IS" BASIS,
** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
** See the License for the specific language governing permissions and
** limitations under the License.
*/
#define LOG_TAG "CameraService"
#include <utils/Log.h>
#include <binder/IServiceManager.h>
#include <binder/IPCThreadState.h>
#include <utils/String16.h>
#include <utils/Errors.h>
#include <binder/MemoryBase.h>
#include <binder/MemoryHeapBase.h>
#include <ui/ICameraService.h>
#include <media/mediaplayer.h>
#include <media/AudioSystem.h>
#include "CameraService.h"
#include <cutils/atomic.h>
namespace android {
extern "C" {
#include <stdio.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <pthread.h>
#include <signal.h>
}
// When you enable this, as well as DEBUG_REFS=1 and
// DEBUG_REFS_ENABLED_BY_DEFAULT=0 in libutils/RefBase.cpp, this will track all
// references to the CameraService::Client in order to catch the case where the
// client is being destroyed while a callback from the CameraHardwareInterface
// is outstanding. This is a serious bug because if we make another call into
// CameraHardwreInterface that itself triggers a callback, we will deadlock.
#define DEBUG_CLIENT_REFERENCES 0
#define PICTURE_TIMEOUT seconds(5)
#define DEBUG_DUMP_PREVIEW_FRAME_TO_FILE 0 /* n-th frame to write */
#define DEBUG_DUMP_JPEG_SNAPSHOT_TO_FILE 0
#define DEBUG_DUMP_YUV_SNAPSHOT_TO_FILE 0
#define DEBUG_DUMP_POSTVIEW_SNAPSHOT_TO_FILE 0
#if DEBUG_DUMP_PREVIEW_FRAME_TO_FILE
static int debug_frame_cnt;
#endif
static int getCallingPid() {
return IPCThreadState::self()->getCallingPid();
}
// ----------------------------------------------------------------------------
void CameraService::instantiate() {
defaultServiceManager()->addService(
String16("media.camera"), new CameraService());
}
// ----------------------------------------------------------------------------
CameraService::CameraService() :
BnCameraService()
{
LOGI("CameraService started: pid=%d", getpid());
mUsers = 0;
}
CameraService::~CameraService()
{
if (mClient != 0) {
LOGE("mClient was still connected in destructor!");
}
}
sp<ICamera> CameraService::connect(const sp<ICameraClient>& cameraClient)
{
int callingPid = getCallingPid();
LOGV("CameraService::connect E (pid %d, client %p)", callingPid,
cameraClient->asBinder().get());
Mutex::Autolock lock(mServiceLock);
sp<Client> client;
if (mClient != 0) {
sp<Client> currentClient = mClient.promote();
if (currentClient != 0) {
sp<ICameraClient> currentCameraClient(currentClient->getCameraClient());
if (cameraClient->asBinder() == currentCameraClient->asBinder()) {
// This is the same client reconnecting...
LOGV("CameraService::connect X (pid %d, same client %p) is reconnecting...",
callingPid, cameraClient->asBinder().get());
return currentClient;
} else {
// It's another client... reject it
LOGV("CameraService::connect X (pid %d, new client %p) rejected. "
"(old pid %d, old client %p)",
callingPid, cameraClient->asBinder().get(),
currentClient->mClientPid, currentCameraClient->asBinder().get());
if (kill(currentClient->mClientPid, 0) == -1 && errno == ESRCH) {
LOGV("The old client is dead!");
}
return client;
}
} else {
// can't promote, the previous client has died...
LOGV("New client (pid %d) connecting, old reference was dangling...",
callingPid);
mClient.clear();
}
}
if (mUsers > 0) {
LOGV("Still have client, rejected");
return client;
}
// create a new Client object
client = new Client(this, cameraClient, callingPid);
mClient = client;
#if DEBUG_CLIENT_REFERENCES
// Enable tracking for this object, and track increments and decrements of
// the refcount.
client->trackMe(true, true);
#endif
LOGV("CameraService::connect X");
return client;
}
void CameraService::removeClient(const sp<ICameraClient>& cameraClient)
{
int callingPid = getCallingPid();
// Declare this outside the lock to make absolutely sure the
// destructor won't be called with the lock held.
sp<Client> client;
Mutex::Autolock lock(mServiceLock);
if (mClient == 0) {
// This happens when we have already disconnected.
LOGV("removeClient (pid %d): already disconnected", callingPid);
return;
}
// Promote mClient. It can fail if we are called from this path:
// Client::~Client() -> disconnect() -> removeClient().
client = mClient.promote();
if (client == 0) {
LOGV("removeClient (pid %d): no more strong reference", callingPid);
mClient.clear();
return;
}
if (cameraClient->asBinder() != client->getCameraClient()->asBinder()) {
// ugh! that's not our client!!
LOGW("removeClient (pid %d): mClient doesn't match!", callingPid);
} else {
// okay, good, forget about mClient
mClient.clear();
}
LOGV("removeClient (pid %d) done", callingPid);
}
// The reason we need this count is a new CameraService::connect() request may
// come in while the previous Client's destructor has not been run or is still
// running. If the last strong reference of the previous Client is gone but
// destructor has not been run, we should not allow the new Client to be created
// because we need to wait for the previous Client to tear down the hardware
// first.
void CameraService::incUsers() {
android_atomic_inc(&mUsers);
}
void CameraService::decUsers() {
android_atomic_dec(&mUsers);
}
static sp<MediaPlayer> newMediaPlayer(const char *file)
{
sp<MediaPlayer> mp = new MediaPlayer();
if (mp->setDataSource(file) == NO_ERROR) {
mp->setAudioStreamType(AudioSystem::ENFORCED_AUDIBLE);
mp->prepare();
} else {
mp.clear();
LOGE("Failed to load CameraService sounds.");
}
return mp;
}
CameraService::Client::Client(const sp<CameraService>& cameraService,
const sp<ICameraClient>& cameraClient, pid_t clientPid)
{
int callingPid = getCallingPid();
LOGV("Client::Client E (pid %d)", callingPid);
mCameraService = cameraService;
mCameraClient = cameraClient;
mClientPid = clientPid;
mHardware = openCameraHardware();
mUseOverlay = mHardware->useOverlay();
mHardware->setCallbacks(notifyCallback,
dataCallback,
dataCallbackTimestamp,
mCameraService.get());
// Enable zoom, error, and focus messages by default
mHardware->enableMsgType(CAMERA_MSG_ERROR |
CAMERA_MSG_ZOOM |
CAMERA_MSG_FOCUS);
mMediaPlayerClick = newMediaPlayer("/system/media/audio/ui/camera_click.ogg");
mMediaPlayerBeep = newMediaPlayer("/system/media/audio/ui/VideoRecord.ogg");
mOverlayW = 0;
mOverlayH = 0;
// Callback is disabled by default
mPreviewCallbackFlag = FRAME_CALLBACK_FLAG_NOOP;
mOrientation = 0;
cameraService->incUsers();
LOGV("Client::Client X (pid %d)", callingPid);
}
status_t CameraService::Client::checkPid()
{
int callingPid = getCallingPid();
if (mClientPid == callingPid) return NO_ERROR;
LOGW("Attempt to use locked camera (client %p) from different process "
" (old pid %d, new pid %d)",
getCameraClient()->asBinder().get(), mClientPid, callingPid);
return -EBUSY;
}
status_t CameraService::Client::lock()
{
int callingPid = getCallingPid();
LOGV("lock from pid %d (mClientPid %d)", callingPid, mClientPid);
Mutex::Autolock _l(mLock);
// lock camera to this client if the the camera is unlocked
if (mClientPid == 0) {
mClientPid = callingPid;
return NO_ERROR;
}
// returns NO_ERROR if the client already owns the camera, -EBUSY otherwise
return checkPid();
}
status_t CameraService::Client::unlock()
{
int callingPid = getCallingPid();
LOGV("unlock from pid %d (mClientPid %d)", callingPid, mClientPid);
Mutex::Autolock _l(mLock);
// allow anyone to use camera
status_t result = checkPid();
if (result == NO_ERROR) {
mClientPid = 0;
LOGV("clear mCameraClient (pid %d)", callingPid);
// we need to remove the reference so that when app goes
// away, the reference count goes to 0.
mCameraClient.clear();
}
return result;
}
status_t CameraService::Client::connect(const sp<ICameraClient>& client)
{
int callingPid = getCallingPid();
// connect a new process to the camera
LOGV("Client::connect E (pid %d, client %p)", callingPid, client->asBinder().get());
// I hate this hack, but things get really ugly when the media recorder
// service is handing back the camera to the app. The ICameraClient
// destructor will be called during the same IPC, making it look like
// the remote client is trying to disconnect. This hack temporarily
// sets the mClientPid to an invalid pid to prevent the hardware from
// being torn down.
{
// hold a reference to the old client or we will deadlock if the client is
// in the same process and we hold the lock when we remove the reference
sp<ICameraClient> oldClient;
{
Mutex::Autolock _l(mLock);
if (mClientPid != 0 && checkPid() != NO_ERROR) {
LOGW("Tried to connect to locked camera (old pid %d, new pid %d)",
mClientPid, callingPid);
return -EBUSY;
}
oldClient = mCameraClient;
// did the client actually change?
if ((mCameraClient != NULL) && (client->asBinder() == mCameraClient->asBinder())) {
LOGV("Connect to the same client");
return NO_ERROR;
}
mCameraClient = client;
mClientPid = -1;
mPreviewCallbackFlag = FRAME_CALLBACK_FLAG_NOOP;
LOGV("Connect to the new client (pid %d, client %p)",
callingPid, mCameraClient->asBinder().get());
}
}
// the old client destructor is called when oldClient goes out of scope
// now we set the new PID to lock the interface again
mClientPid = callingPid;
return NO_ERROR;
}
#if HAVE_ANDROID_OS
static void *unregister_surface(void *arg)
{
ISurface *surface = (ISurface *)arg;
surface->unregisterBuffers();
IPCThreadState::self()->flushCommands();
return NULL;
}
#endif
CameraService::Client::~Client()
{
int callingPid = getCallingPid();
// tear down client
LOGV("Client::~Client E (pid %d, client %p)",
callingPid, getCameraClient()->asBinder().get());
if (mSurface != 0 && !mUseOverlay) {
#if HAVE_ANDROID_OS
pthread_t thr;
// We unregister the buffers in a different thread because binder does
// not let us make sychronous transactions in a binder destructor (that
// is, upon our reaching a refcount of zero.)
pthread_create(&thr, NULL,
unregister_surface,
mSurface.get());
pthread_join(thr, NULL);
#else
mSurface->unregisterBuffers();
#endif
}
if (mMediaPlayerBeep.get() != NULL) {
mMediaPlayerBeep->disconnect();
mMediaPlayerBeep.clear();
}
if (mMediaPlayerClick.get() != NULL) {
mMediaPlayerClick->disconnect();
mMediaPlayerClick.clear();
}
// make sure we tear down the hardware
mClientPid = callingPid;
disconnect();
LOGV("Client::~Client X (pid %d)", mClientPid);
}
void CameraService::Client::disconnect()
{
int callingPid = getCallingPid();
LOGV("Client::disconnect() E (pid %d client %p)",
callingPid, getCameraClient()->asBinder().get());
Mutex::Autolock lock(mLock);
if (mClientPid <= 0) {
LOGV("camera is unlocked (mClientPid = %d), don't tear down hardware", mClientPid);
return;
}
if (checkPid() != NO_ERROR) {
LOGV("Different client - don't disconnect");
return;
}
// Make sure disconnect() is done once and once only, whether it is called
// from the user directly, or called by the destructor.
if (mHardware == 0) return;
LOGV("hardware teardown");
// Before destroying mHardware, we must make sure it's in the
// idle state.
mHardware->stopPreview();
// Cancel all picture callbacks.
mHardware->disableMsgType(CAMERA_MSG_SHUTTER |
CAMERA_MSG_POSTVIEW_FRAME |
CAMERA_MSG_RAW_IMAGE |
CAMERA_MSG_COMPRESSED_IMAGE);
mHardware->cancelPicture();
// Turn off remaining messages.
mHardware->disableMsgType(CAMERA_MSG_ALL_MSGS);
// Release the hardware resources.
mHardware->release();
// Release the held overlay resources.
if (mUseOverlay)
{
mOverlayRef = 0;
}
mHardware.clear();
mCameraService->removeClient(mCameraClient);
mCameraService->decUsers();
LOGV("Client::disconnect() X (pid %d)", callingPid);
}
// pass the buffered ISurface to the camera service
status_t CameraService::Client::setPreviewDisplay(const sp<ISurface>& surface)
{
LOGV("setPreviewDisplay(%p) (pid %d)",
((surface == NULL) ? NULL : surface.get()), getCallingPid());
Mutex::Autolock lock(mLock);
status_t result = checkPid();
if (result != NO_ERROR) return result;
Mutex::Autolock surfaceLock(mSurfaceLock);
result = NO_ERROR;
// asBinder() is safe on NULL (returns NULL)
if (surface->asBinder() != mSurface->asBinder()) {
if (mSurface != 0) {
LOGV("clearing old preview surface %p", mSurface.get());
if ( !mUseOverlay)
{
mSurface->unregisterBuffers();
}
else
{
// Force the destruction of any previous overlay
sp<Overlay> dummy;
mHardware->setOverlay( dummy );
}
}
mSurface = surface;
mOverlayRef = 0;
// If preview has been already started, set overlay or register preview
// buffers now.
if (mHardware->previewEnabled()) {
if (mUseOverlay) {
result = setOverlay();
} else if (mSurface != 0) {
result = registerPreviewBuffers();
}
}
}
return result;
}
// set the preview callback flag to affect how the received frames from
// preview are handled.
void CameraService::Client::setPreviewCallbackFlag(int callback_flag)
{
LOGV("setPreviewCallbackFlag (pid %d)", getCallingPid());
Mutex::Autolock lock(mLock);
if (checkPid() != NO_ERROR) return;
mPreviewCallbackFlag = callback_flag;
if(mUseOverlay) {
if(mPreviewCallbackFlag & FRAME_CALLBACK_FLAG_ENABLE_MASK)
mHardware->enableMsgType(CAMERA_MSG_PREVIEW_FRAME);
else
mHardware->disableMsgType(CAMERA_MSG_PREVIEW_FRAME);
}
}
// start preview mode
status_t CameraService::Client::startCameraMode(camera_mode mode)
{
int callingPid = getCallingPid();
LOGV("startCameraMode(%d) (pid %d)", mode, callingPid);
/* we cannot call into mHardware with mLock held because
* mHardware has callbacks onto us which acquire this lock
*/
Mutex::Autolock lock(mLock);
status_t result = checkPid();
if (result != NO_ERROR) return result;
if (mHardware == 0) {
LOGE("mHardware is NULL, returning.");
return INVALID_OPERATION;
}
switch(mode) {
case CAMERA_RECORDING_MODE:
if (mSurface == 0) {
LOGE("setPreviewDisplay must be called before startRecordingMode.");
return INVALID_OPERATION;
}
return startRecordingMode();
default: // CAMERA_PREVIEW_MODE
if (mSurface == 0) {
LOGV("mSurface is not set yet.");
}
return startPreviewMode();
}
}
status_t CameraService::Client::startRecordingMode()
{
LOGV("startRecordingMode (pid %d)", getCallingPid());
status_t ret = UNKNOWN_ERROR;
// if preview has not been started, start preview first
if (!mHardware->previewEnabled()) {
ret = startPreviewMode();
if (ret != NO_ERROR) {
return ret;
}
}
// if recording has been enabled, nothing needs to be done
if (mHardware->recordingEnabled()) {
return NO_ERROR;
}
// start recording mode
ret = mHardware->startRecording();
if (ret != NO_ERROR) {
LOGE("mHardware->startRecording() failed with status %d", ret);
}
return ret;
}
status_t CameraService::Client::setOverlay()
{
LOGV("setOverlay");
int w, h;
CameraParameters params(mHardware->getParameters());
params.getPreviewSize(&w, &h);
if ( w != mOverlayW || h != mOverlayH )
{
// Force the destruction of any previous overlay
sp<Overlay> dummy;
mHardware->setOverlay( dummy );
mOverlayRef = 0;
}
status_t ret = NO_ERROR;
if (mSurface != 0) {
if (mOverlayRef.get() == NULL) {
// FIXME:
// Surfaceflinger may hold onto the previous overlay reference for some
// time after we try to destroy it. retry a few times. In the future, we
// should make the destroy call block, or possibly specify that we can
// wait in the createOverlay call if the previous overlay is in the
// process of being destroyed.
for (int retry = 0; retry < 50; ++retry) {
mOverlayRef = mSurface->createOverlay(w, h, OVERLAY_FORMAT_DEFAULT,
mOrientation);
if (mOverlayRef != NULL) break;
LOGW("Overlay create failed - retrying");
usleep(20000);
}
if ( mOverlayRef.get() == NULL )
{
LOGE("Overlay Creation Failed!");
return -EINVAL;
}
ret = mHardware->setOverlay(new Overlay(mOverlayRef));
}
} else {
ret = mHardware->setOverlay(NULL);
}
if (ret != NO_ERROR) {
LOGE("mHardware->setOverlay() failed with status %d\n", ret);
}
mOverlayW = w;
mOverlayH = h;
return ret;
}
status_t CameraService::Client::registerPreviewBuffers()
{
int w, h;
CameraParameters params(mHardware->getParameters());
params.getPreviewSize(&w, &h);
ISurface::BufferHeap buffers(w, h, w, h,
PIXEL_FORMAT_YCbCr_420_SP,
mOrientation,
0,
mHardware->getPreviewHeap());
status_t ret = mSurface->registerBuffers(buffers);
if (ret != NO_ERROR) {
LOGE("registerBuffers failed with status %d", ret);
}
return ret;
}
status_t CameraService::Client::startPreviewMode()
{
LOGV("startPreviewMode (pid %d)", getCallingPid());
// if preview has been enabled, nothing needs to be done
if (mHardware->previewEnabled()) {
return NO_ERROR;
}
// start preview mode
#if DEBUG_DUMP_PREVIEW_FRAME_TO_FILE
debug_frame_cnt = 0;
#endif
status_t ret = NO_ERROR;
if (mUseOverlay) {
// If preview display has been set, set overlay now.
if (mSurface != 0) {
ret = setOverlay();
}
if (ret != NO_ERROR) return ret;
ret = mHardware->startPreview();
} else {
mHardware->enableMsgType(CAMERA_MSG_PREVIEW_FRAME);
ret = mHardware->startPreview();
if (ret != NO_ERROR) return ret;
// If preview display has been set, register preview buffers now.
if (mSurface != 0) {
// Unregister here because the surface registered with raw heap.
mSurface->unregisterBuffers();
ret = registerPreviewBuffers();
}
}
return ret;
}
status_t CameraService::Client::startPreview()
{
LOGV("startPreview (pid %d)", getCallingPid());
return startCameraMode(CAMERA_PREVIEW_MODE);
}
status_t CameraService::Client::startRecording()
{
LOGV("startRecording (pid %d)", getCallingPid());
if (mMediaPlayerBeep.get() != NULL) {
// do not play record jingle if stream volume is 0
// (typically because ringer mode is silent).
int index;
AudioSystem::getStreamVolumeIndex(AudioSystem::ENFORCED_AUDIBLE, &index);
if (index != 0) {
mMediaPlayerBeep->seekTo(0);
mMediaPlayerBeep->start();
}
}
mHardware->enableMsgType(CAMERA_MSG_VIDEO_FRAME);
return startCameraMode(CAMERA_RECORDING_MODE);
}
// stop preview mode
void CameraService::Client::stopPreview()
{
LOGV("stopPreview (pid %d)", getCallingPid());
// hold main lock during state transition
{
Mutex::Autolock lock(mLock);
if (checkPid() != NO_ERROR) return;
if (mHardware == 0) {
LOGE("mHardware is NULL, returning.");
return;
}
mHardware->stopPreview();
mHardware->disableMsgType(CAMERA_MSG_PREVIEW_FRAME);
LOGV("stopPreview(), hardware stopped OK");
if (mSurface != 0 && !mUseOverlay) {
mSurface->unregisterBuffers();
}
}
// hold preview buffer lock
{
Mutex::Autolock lock(mPreviewLock);
mPreviewBuffer.clear();
}
}
// stop recording mode
void CameraService::Client::stopRecording()
{
LOGV("stopRecording (pid %d)", getCallingPid());
// hold main lock during state transition
{
Mutex::Autolock lock(mLock);
if (checkPid() != NO_ERROR) return;
if (mHardware == 0) {
LOGE("mHardware is NULL, returning.");
return;
}
if (mMediaPlayerBeep.get() != NULL) {
mMediaPlayerBeep->seekTo(0);
mMediaPlayerBeep->start();
}
mHardware->stopRecording();
mHardware->disableMsgType(CAMERA_MSG_VIDEO_FRAME);
LOGV("stopRecording(), hardware stopped OK");
}
// hold preview buffer lock
{
Mutex::Autolock lock(mPreviewLock);
mPreviewBuffer.clear();
}
}
// release a recording frame
void CameraService::Client::releaseRecordingFrame(const sp<IMemory>& mem)
{
Mutex::Autolock lock(mLock);
if (checkPid() != NO_ERROR) return;
if (mHardware == 0) {
LOGE("mHardware is NULL, returning.");
return;
}
mHardware->releaseRecordingFrame(mem);
}
bool CameraService::Client::previewEnabled()
{
Mutex::Autolock lock(mLock);
if (mHardware == 0) return false;
return mHardware->previewEnabled();
}
bool CameraService::Client::recordingEnabled()
{
Mutex::Autolock lock(mLock);
if (mHardware == 0) return false;
return mHardware->recordingEnabled();
}
// Safely retrieves a strong pointer to the client during a hardware callback.
sp<CameraService::Client> CameraService::Client::getClientFromCookie(void* user)
{
sp<Client> client = 0;
CameraService *service = static_cast<CameraService*>(user);
if (service != NULL) {
Mutex::Autolock ourLock(service->mServiceLock);
if (service->mClient != 0) {
client = service->mClient.promote();
if (client == 0) {
LOGE("getClientFromCookie: client appears to have died");
service->mClient.clear();
}
} else {
LOGE("getClientFromCookie: got callback but client was NULL");
}
}
return client;
}
#if DEBUG_DUMP_JPEG_SNAPSHOT_TO_FILE || \
DEBUG_DUMP_YUV_SNAPSHOT_TO_FILE || \
DEBUG_DUMP_PREVIEW_FRAME_TO_FILE
static void dump_to_file(const char *fname,
uint8_t *buf, uint32_t size)
{
int nw, cnt = 0;
uint32_t written = 0;
LOGV("opening file [%s]\n", fname);
int fd = open(fname, O_RDWR | O_CREAT);
if (fd < 0) {
LOGE("failed to create file [%s]: %s", fname, strerror(errno));
return;
}
LOGV("writing %d bytes to file [%s]\n", size, fname);
while (written < size) {
nw = ::write(fd,
buf + written,
size - written);
if (nw < 0) {
LOGE("failed to write to file [%s]: %s",
fname, strerror(errno));
break;
}
written += nw;
cnt++;
}
LOGV("done writing %d bytes to file [%s] in %d passes\n",
size, fname, cnt);
::close(fd);
}
#endif
status_t CameraService::Client::autoFocus()
{
LOGV("autoFocus (pid %d)", getCallingPid());
Mutex::Autolock lock(mLock);
status_t result = checkPid();
if (result != NO_ERROR) return result;
if (mHardware == 0) {
LOGE("mHardware is NULL, returning.");
return INVALID_OPERATION;
}
return mHardware->autoFocus();
}
status_t CameraService::Client::cancelAutoFocus()
{
LOGV("cancelAutoFocus (pid %d)", getCallingPid());
Mutex::Autolock lock(mLock);
status_t result = checkPid();
if (result != NO_ERROR) return result;
if (mHardware == 0) {
LOGE("mHardware is NULL, returning.");
return INVALID_OPERATION;
}
return mHardware->cancelAutoFocus();
}
// take a picture - image is returned in callback
status_t CameraService::Client::takePicture()
{
LOGV("takePicture (pid %d)", getCallingPid());
Mutex::Autolock lock(mLock);
status_t result = checkPid();
if (result != NO_ERROR) return result;
if (mHardware == 0) {
LOGE("mHardware is NULL, returning.");
return INVALID_OPERATION;
}
mHardware->enableMsgType(CAMERA_MSG_SHUTTER |
CAMERA_MSG_POSTVIEW_FRAME |
CAMERA_MSG_RAW_IMAGE |
CAMERA_MSG_COMPRESSED_IMAGE);
return mHardware->takePicture();
}
// snapshot taken
void CameraService::Client::handleShutter(
image_rect_type *size // The width and height of yuv picture for
// registerBuffer. If this is NULL, use the picture
// size from parameters.
)
{
// Play shutter sound.
if (mMediaPlayerClick.get() != NULL) {
// do not play shutter sound if stream volume is 0
// (typically because ringer mode is silent).
int index;
AudioSystem::getStreamVolumeIndex(AudioSystem::ENFORCED_AUDIBLE, &index);
if (index != 0) {
mMediaPlayerClick->seekTo(0);
mMediaPlayerClick->start();
}
}
// Screen goes black after the buffer is unregistered.
if (mSurface != 0 && !mUseOverlay) {
mSurface->unregisterBuffers();
}
sp<ICameraClient> c = mCameraClient;
if (c != NULL) {
c->notifyCallback(CAMERA_MSG_SHUTTER, 0, 0);
}
mHardware->disableMsgType(CAMERA_MSG_SHUTTER);
// It takes some time before yuvPicture callback to be called.
// Register the buffer for raw image here to reduce latency.
if (mSurface != 0 && !mUseOverlay) {
int w, h;
CameraParameters params(mHardware->getParameters());
if (size == NULL) {
params.getPictureSize(&w, &h);
} else {
w = size->width;
h = size->height;
w &= ~1;
h &= ~1;
LOGV("Snapshot image width=%d, height=%d", w, h);
}
ISurface::BufferHeap buffers(w, h, w, h,
PIXEL_FORMAT_YCbCr_420_SP, mOrientation, 0, mHardware->getRawHeap());
mSurface->registerBuffers(buffers);
}
}
// preview callback - frame buffer update
void CameraService::Client::handlePreviewData(const sp<IMemory>& mem)
{
ssize_t offset;
size_t size;
sp<IMemoryHeap> heap = mem->getMemory(&offset, &size);
#if DEBUG_HEAP_LEAKS && 0 // debugging
if (gWeakHeap == NULL) {
if (gWeakHeap != heap) {
LOGV("SETTING PREVIEW HEAP");
heap->trackMe(true, true);
gWeakHeap = heap;
}
}
#endif
#if DEBUG_DUMP_PREVIEW_FRAME_TO_FILE
{
if (debug_frame_cnt++ == DEBUG_DUMP_PREVIEW_FRAME_TO_FILE) {
dump_to_file("/data/preview.yuv",
(uint8_t *)heap->base() + offset, size);
}
}
#endif
if (!mUseOverlay)
{
Mutex::Autolock surfaceLock(mSurfaceLock);
if (mSurface != NULL) {
mSurface->postBuffer(offset);
}
}
// local copy of the callback flags
int flags = mPreviewCallbackFlag;
// is callback enabled?
if (!(flags & FRAME_CALLBACK_FLAG_ENABLE_MASK)) {
// If the enable bit is off, the copy-out and one-shot bits are ignored
LOGV("frame callback is diabled");
return;
}
// hold a strong pointer to the client
sp<ICameraClient> c = mCameraClient;
// clear callback flags if no client or one-shot mode
if ((c == NULL) || (mPreviewCallbackFlag & FRAME_CALLBACK_FLAG_ONE_SHOT_MASK)) {
LOGV("Disable preview callback");
mPreviewCallbackFlag &= ~(FRAME_CALLBACK_FLAG_ONE_SHOT_MASK |
FRAME_CALLBACK_FLAG_COPY_OUT_MASK |
FRAME_CALLBACK_FLAG_ENABLE_MASK);
// TODO: Shouldn't we use this API for non-overlay hardware as well?
if (mUseOverlay)
mHardware->disableMsgType(CAMERA_MSG_PREVIEW_FRAME);
}
// Is the received frame copied out or not?
if (flags & FRAME_CALLBACK_FLAG_COPY_OUT_MASK) {
LOGV("frame is copied");
copyFrameAndPostCopiedFrame(c, heap, offset, size);
} else {
LOGV("frame is forwarded");
c->dataCallback(CAMERA_MSG_PREVIEW_FRAME, mem);
}
}
// picture callback - postview image ready
void CameraService::Client::handlePostview(const sp<IMemory>& mem)
{
#if DEBUG_DUMP_POSTVIEW_SNAPSHOT_TO_FILE // for testing pursposes only
{
ssize_t offset;
size_t size;
sp<IMemoryHeap> heap = mem->getMemory(&offset, &size);
dump_to_file("/data/postview.yuv",
(uint8_t *)heap->base() + offset, size);
}
#endif
sp<ICameraClient> c = mCameraClient;
if (c != NULL) {
c->dataCallback(CAMERA_MSG_POSTVIEW_FRAME, mem);
}
mHardware->disableMsgType(CAMERA_MSG_POSTVIEW_FRAME);
}
// picture callback - raw image ready
void CameraService::Client::handleRawPicture(const sp<IMemory>& mem)
{
ssize_t offset;
size_t size;
sp<IMemoryHeap> heap = mem->getMemory(&offset, &size);
#if DEBUG_HEAP_LEAKS && 0 // debugging
gWeakHeap = heap; // debugging
#endif
//LOGV("handleRawPicture(%d, %d)", offset, size);
#if DEBUG_DUMP_YUV_SNAPSHOT_TO_FILE // for testing pursposes only
dump_to_file("/data/photo.yuv",
(uint8_t *)heap->base() + offset, size);
#endif
// Put the YUV version of the snapshot in the preview display.
if (mSurface != 0 && !mUseOverlay) {
mSurface->postBuffer(offset);
}
sp<ICameraClient> c = mCameraClient;
if (c != NULL) {
c->dataCallback(CAMERA_MSG_RAW_IMAGE, mem);
}
mHardware->disableMsgType(CAMERA_MSG_RAW_IMAGE);
}
// picture callback - compressed picture ready
void CameraService::Client::handleCompressedPicture(const sp<IMemory>& mem)
{
#if DEBUG_DUMP_JPEG_SNAPSHOT_TO_FILE // for testing pursposes only
{
ssize_t offset;
size_t size;
sp<IMemoryHeap> heap = mem->getMemory(&offset, &size);
dump_to_file("/data/photo.jpg",
(uint8_t *)heap->base() + offset, size);
}
#endif
sp<ICameraClient> c = mCameraClient;
if (c != NULL) {
c->dataCallback(CAMERA_MSG_COMPRESSED_IMAGE, mem);
}
mHardware->disableMsgType(CAMERA_MSG_COMPRESSED_IMAGE);
}
void CameraService::Client::notifyCallback(int32_t msgType, int32_t ext1, int32_t ext2, void* user)
{
LOGV("notifyCallback(%d)", msgType);
sp<Client> client = getClientFromCookie(user);
if (client == 0) {
return;
}
switch (msgType) {
case CAMERA_MSG_SHUTTER:
// ext1 is the dimension of the yuv picture.
client->handleShutter((image_rect_type *)ext1);
break;
default:
sp<ICameraClient> c = client->mCameraClient;
if (c != NULL) {
c->notifyCallback(msgType, ext1, ext2);
}
break;
}
#if DEBUG_CLIENT_REFERENCES
if (client->getStrongCount() == 1) {
LOGE("++++++++++++++++ (NOTIFY CALLBACK) THIS WILL CAUSE A LOCKUP!");
client->printRefs();
}
#endif
}
void CameraService::Client::dataCallback(int32_t msgType, const sp<IMemory>& dataPtr, void* user)
{
LOGV("dataCallback(%d)", msgType);
sp<Client> client = getClientFromCookie(user);
if (client == 0) {
return;
}
sp<ICameraClient> c = client->mCameraClient;
if (dataPtr == NULL) {
LOGE("Null data returned in data callback");
if (c != NULL) {
c->notifyCallback(CAMERA_MSG_ERROR, UNKNOWN_ERROR, 0);
c->dataCallback(msgType, NULL);
}
return;
}
switch (msgType) {
case CAMERA_MSG_PREVIEW_FRAME:
client->handlePreviewData(dataPtr);
break;
case CAMERA_MSG_POSTVIEW_FRAME:
client->handlePostview(dataPtr);
break;
case CAMERA_MSG_RAW_IMAGE:
client->handleRawPicture(dataPtr);
break;
case CAMERA_MSG_COMPRESSED_IMAGE:
client->handleCompressedPicture(dataPtr);
break;
default:
if (c != NULL) {
c->dataCallback(msgType, dataPtr);
}
break;
}
#if DEBUG_CLIENT_REFERENCES
if (client->getStrongCount() == 1) {
LOGE("++++++++++++++++ (DATA CALLBACK) THIS WILL CAUSE A LOCKUP!");
client->printRefs();
}
#endif
}
void CameraService::Client::dataCallbackTimestamp(nsecs_t timestamp, int32_t msgType,
const sp<IMemory>& dataPtr, void* user)
{
LOGV("dataCallbackTimestamp(%d)", msgType);
sp<Client> client = getClientFromCookie(user);
if (client == 0) {
return;
}
sp<ICameraClient> c = client->mCameraClient;
if (dataPtr == NULL) {
LOGE("Null data returned in data with timestamp callback");
if (c != NULL) {
c->notifyCallback(CAMERA_MSG_ERROR, UNKNOWN_ERROR, 0);
c->dataCallbackTimestamp(0, msgType, NULL);
}
return;
}
if (c != NULL) {
c->dataCallbackTimestamp(timestamp, msgType, dataPtr);
}
#if DEBUG_CLIENT_REFERENCES
if (client->getStrongCount() == 1) {
LOGE("++++++++++++++++ (DATA CALLBACK TIMESTAMP) THIS WILL CAUSE A LOCKUP!");
client->printRefs();
}
#endif
}
// set preview/capture parameters - key/value pairs
status_t CameraService::Client::setParameters(const String8& params)
{
LOGV("setParameters(%s)", params.string());
Mutex::Autolock lock(mLock);
status_t result = checkPid();
if (result != NO_ERROR) return result;
if (mHardware == 0) {
LOGE("mHardware is NULL, returning.");
return INVALID_OPERATION;
}
CameraParameters p(params);
// The orientation parameter is actually for CameraService, not for the camera driver.
if (p.getOrientation() == CameraParameters::CAMERA_ORIENTATION_PORTRAIT) {
LOGV("portrait mode");
mOrientation = ISurface::BufferHeap::ROT_90;
} else {
mOrientation = 0;
}
return mHardware->setParameters(p);
}
// get preview/capture parameters - key/value pairs
String8 CameraService::Client::getParameters() const
{
Mutex::Autolock lock(mLock);
if (mHardware == 0) {
LOGE("mHardware is NULL, returning.");
return String8();
}
String8 params(mHardware->getParameters().flatten());
LOGV("getParameters(%s)", params.string());
return params;
}
status_t CameraService::Client::sendCommand(int32_t cmd, int32_t arg1, int32_t arg2)
{
LOGV("sendCommand (pid %d)", getCallingPid());
Mutex::Autolock lock(mLock);
status_t result = checkPid();
if (result != NO_ERROR) return result;
if (mHardware == 0) {
LOGE("mHardware is NULL, returning.");
return INVALID_OPERATION;
}
return mHardware->sendCommand(cmd, arg1, arg2);
}
void CameraService::Client::copyFrameAndPostCopiedFrame(const sp<ICameraClient>& client,
const sp<IMemoryHeap>& heap, size_t offset, size_t size)
{
LOGV("copyFrameAndPostCopiedFrame");
// It is necessary to copy out of pmem before sending this to
// the callback. For efficiency, reuse the same MemoryHeapBase
// provided it's big enough. Don't allocate the memory or
// perform the copy if there's no callback.
// hold the preview lock while we grab a reference to the preview buffer
sp<MemoryHeapBase> previewBuffer;
{
Mutex::Autolock lock(mPreviewLock);
if (mPreviewBuffer == 0) {
mPreviewBuffer = new MemoryHeapBase(size, 0, NULL);
} else if (size > mPreviewBuffer->virtualSize()) {
mPreviewBuffer.clear();
mPreviewBuffer = new MemoryHeapBase(size, 0, NULL);
}
if (mPreviewBuffer == 0) {
LOGE("failed to allocate space for preview buffer");
return;
}
previewBuffer = mPreviewBuffer;
}
memcpy(previewBuffer->base(),
(uint8_t *)heap->base() + offset, size);
sp<MemoryBase> frame = new MemoryBase(previewBuffer, 0, size);
if (frame == 0) {
LOGE("failed to allocate space for frame callback");
return;
}
client->dataCallback(CAMERA_MSG_PREVIEW_FRAME, frame);
}
status_t CameraService::dump(int fd, const Vector<String16>& args)
{
const size_t SIZE = 256;
char buffer[SIZE];
String8 result;
if (checkCallingPermission(String16("android.permission.DUMP")) == false) {
snprintf(buffer, SIZE, "Permission Denial: "
"can't dump CameraService from pid=%d, uid=%d\n",
getCallingPid(),
IPCThreadState::self()->getCallingUid());
result.append(buffer);
write(fd, result.string(), result.size());
} else {
AutoMutex lock(&mServiceLock);
if (mClient != 0) {
sp<Client> currentClient = mClient.promote();
sprintf(buffer, "Client (%p) PID: %d\n",
currentClient->getCameraClient()->asBinder().get(),
currentClient->mClientPid);
result.append(buffer);
write(fd, result.string(), result.size());
currentClient->mHardware->dump(fd, args);
} else {
result.append("No camera client yet.\n");
write(fd, result.string(), result.size());
}
}
return NO_ERROR;
}
status_t CameraService::onTransact(
uint32_t code, const Parcel& data, Parcel* reply, uint32_t flags)
{
// permission checks...
switch (code) {
case BnCameraService::CONNECT:
IPCThreadState* ipc = IPCThreadState::self();
const int pid = ipc->getCallingPid();
const int self_pid = getpid();
if (pid != self_pid) {
// we're called from a different process, do the real check
if (!checkCallingPermission(
String16("android.permission.CAMERA")))
{
const int uid = ipc->getCallingUid();
LOGE("Permission Denial: "
"can't use the camera pid=%d, uid=%d", pid, uid);
return PERMISSION_DENIED;
}
}
break;
}
status_t err = BnCameraService::onTransact(code, data, reply, flags);
#if DEBUG_HEAP_LEAKS
LOGV("+++ onTransact err %d code %d", err, code);
if (err == UNKNOWN_TRANSACTION || err == PERMISSION_DENIED) {
// the 'service' command interrogates this binder for its name, and then supplies it
// even for the debugging commands. that means we need to check for it here, using
// ISurfaceComposer (since we delegated the INTERFACE_TRANSACTION handling to
// BnSurfaceComposer before falling through to this code).
LOGV("+++ onTransact code %d", code);
CHECK_INTERFACE(ICameraService, data, reply);
switch(code) {
case 1000:
{
if (gWeakHeap != 0) {
sp<IMemoryHeap> h = gWeakHeap.promote();
IMemoryHeap *p = gWeakHeap.unsafe_get();
LOGV("CHECKING WEAK REFERENCE %p (%p)", h.get(), p);
if (h != 0)
h->printRefs();
bool attempt_to_delete = data.readInt32() == 1;
if (attempt_to_delete) {
// NOT SAFE!
LOGV("DELETING WEAK REFERENCE %p (%p)", h.get(), p);
if (p) delete p;
}
return NO_ERROR;
}
}
break;
default:
break;
}
}
#endif // DEBUG_HEAP_LEAKS
return err;
}
}; // namespace android